Upload
haxuyen
View
215
Download
0
Embed Size (px)
Citation preview
CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 3/15/18 INST99-8725B
I N S TA L L AT I O N I N S T R U C T I O N S99-8725B
KIT FEATURES• ISODINradioprovisionwithpocket• ISODDINradioprovision• Includespartstorelocatethehazardswitchpanel• Paintedmatteblack
KIT COMPONENTS•A)Radiotrimpanel•B)Radiobrackets•C)Hazardswitchhousing•D)Hazardswitchbracket•E)Hazardswitchhousingspacer•F)Pocket•G)(12)#8x3/8”Phillipsscrews•H)(1)#8x1Phillipsscrew
TOOLS REQUIRED•Panelremovaltool•Phillipsscrewdriver•TorxT20screwdriver•Cuttingtool
TABLE OF CONTENTS
DashDisassembly...............................................2-3KitPreparation................................................... 4-5KitAssembly–ISODINradioprovisionwithpocket..................6–ISODINradioprovisionwithpocket.................. 7
WIRING & ANTENNA CONNECTIONS(soldseparately)
WiringHarness:TBAAntennaAdapter:40-EU56Steeringwheelcontrolinterface:ASWC-1
A B C D FE
MercedesC Class 2012-2015
G H
1.800.221.0932 | MetraOnline.com2
DASH DISASSEMBLY
Radio removal
1. Unclip,unplug,andremovethedashboardtrimpanelabovetheradio.Thispanelalsoincludesthecentera/cvents.(FigureA)
2. Unscrew(2)TorxT20screwsonthetopoftheradio,justhalfway(aboutahalfinch),thenpushthescrewsdowntoreleasetheradio.Pulltheradioout,thenunplug.(FigureB)
Display screen removal
3. Unclipandremovethelowertrimfromthespeedometercluster.(FigureC)
4. Unclipandremovetheuppertrimfromthespeedometercluster.(FigureD)
Continuedonthenextpage
(FigureA) (FigureC)
(FigureB) (FigureD)
REV. 3/15/2018 INST99-8725B 3
(FigureE) (FigureF)
DASH DISASSEMBLY (CONT.)
5. Removethedisplayscreentrimpanelstotheleftandrightofthescreenbypushinginwardstowardthescreen.Thiswillaidinremovingthespeedometertrimplateinthenextstep.(FigureE)
6. Unclipandremovethespeedometertrimplate.Thispanelisheldonbyclipsatthetop,andhingesonthebottom.Thistrimplatewillalsoincludethedisplayscreen.Unplugthedisplayscreentocompletelyremovethetrimplate.(FigureF)
ContinuetoKitPreparation
1.800.221.0932 | MetraOnline.com4
KIT PREPARATION
1. Unclipandremovethedisplayscreenfromthespeedometertrimplate.(FigureA)
2. Cutthespeedometertrimplateasshown.(FigureB)
3. Remove(4)TorxT20screwssecuringthehazardswitchtotheradio,thenremovetheswitch.
4. Placethehazardswitchintothehazardswitchhousing.
Continuedonthenextpage
(FigureB)
Removeshadedarea
(FigureA)
REV. 3/15/2018 INST99-8725B 5
KIT PREPARATION (CONT.)
5. Securethehazardswitchbrackettothehazardswitchhousingusingthe(4)#8x3/8”Phillipsscrewsprovided.Thiswillsecurethehazardswitchinplace.(FigureC)
6. Slidethehazardassemblyontothespeedometertrimplate.(FigureD)
7. Placethehazardswitchhousingspacerontothespeedometertrimplate,thensecuretheentireassemblytothetrimplateusingthe(1)#8x1Phillipsscrewprovided.(FigureE)
8. Routethehazardswitchwiringharnesstothedisplayscreenarea.
9. Connectthehazardswitchharnesstothehazardswitch,thenreassemblethetopportionofthedashinreverseorderofdisassembly,steps3-6(skipstep5).
ContinuetoKitAssembly
(FigureC) (FigureD) (FigureE)
1.800.221.0932 | MetraOnline.com6
(FigureA)
(FigureB)
(FigureC)
ISO DIN radio provision with pocket
1. Securetheradiobracketstotheradiotrimpanelusingthe(4)#8x3/8”Phillipsscrewsprovided.(FigureA).
2. Slidethepocketintothebracket/panelassembly,thensecureitusingthe(4)#8x3/8”Phillipsscrewsprovided.(FigureB)
3. RemovethemetalDINsleeveandtrimringfromtheaftermarketradio.
4. Slidetheradiointothebracket/pocketassembly,thensecureitusingthescrewssuppliedwiththeradio.(FigureC)
5. Locatethefactorywiringharnessandantennaconnectorinthedashandcompleteallnecessaryconnectionstotheradio.MetrarecommendsusingthepropermatingadapterfromMetraand/orAxxess.Testtheradioforproperoperation.
6. Reassemblethedashinreverseorderofdisassemblytocompletetheinstallation.
KIT ASSEMBLY
REV. 3/15/2018 INST99-8725B 7
(FigureA) (FigureB)
ISO DDIN radio provision
1. Securetheradiobracketstotheradiotrimpanelusingthe(4)#8x3/8”Phillipsscrewsprovided.(FigureA).
2. Slidetheradiointothebracket/panelassembly,thensecureitusingthescrewssuppliedwiththeradio.(FigureB)
3. Locatethefactorywiringharnessandantennaconnectorinthedashandcompleteallnecessaryconnectionstotheradio.MetrarecommendsusingthepropermatingadapterfromMetraand/orAxxess.Testtheradioforproperoperation.
4. Reassemblethedashinreverseorderofdisassemblytocompletetheinstallation.
KIT ASSEMBLY
KNOWLEDGE IS POWEREnhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
®
Metra recommends MECP certified technicians
IMPORTANTIf you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 3/15/18 INST99-8725B
I N S TA L L AT I O N I N S T R U C T I O N S99-8725B