Upload
jade-cannon
View
227
Download
4
Tags:
Embed Size (px)
Citation preview
gear box motor ready for use with FD
bell housing, coupling (HBE) integrated counter
high precision gear pump ZPDA (Beinlich)
3 lip block chamber
manifold (Beinlich) integrated pressure and temperature controll bypass-port
positive displacement gear flow meter VS (VSE)
2-chanel sensory NEW interpolation system for all
flow meters available
ZPDA /ZPD-KIhigh accuracy pump dosing system
ZPDA with VS
gear box motor ready for FD
bell housing, coupling (HBE)
dosing pump ZPD (Beinlich) 3 lip block chamber version with running plates (KIS)
ZPDA /ZPD-KIhigh accuracy pump dosing system
ZPD - KI
complete stainless steel, coatings or nitrated steel available
outlet pressures up to 200 bar
viscosity range from 10 cPs to 150’000 cPs
displacements : size 1 housing:
0,1; 0,3; 0,6; 1,2; 1,8;2,4; 3,0; 4,8; 6,0; 10,0 cc/revsize 2 housing:10,0; 12,0; 16,0;20,0; 22,0; 26,0 cc/rev
built as ZPDA adaptable or as “KI” version with running plates
all pumps with speed indicator – mounted in the bell housing – available
used as ZPDA available with manifold and directly mounted flow meter of VSE
ZPDA /ZPD-KIhigh accuracy pump dosing system
• variable shaft sealant systems for:- packing glands- 3 lip block chamber- mechanical contact seal
• swift mounting and demounting, short break down times• same shaft sealing construction for all pumps in the same housing size; minimized spare part storage• connecting via bell housing• all pumps available with mag-drive (DST)
Special marks for ZPDA
• inlet and outlet ports in the back-plate• alternatively -standard manifold (optional with foot bracket) or -customised manifold (e.g. available with integrated ports of pressure or temperature control and/or by-pass function)
• mechanical contact seal- 15 bar standard inlet pressure- combination with block chamber in
FKM - Face SISIC / SISIC (Ceramics)
• 3 lip block chamber- 10 bar standard inlet pressure- PTFE lip seal ring to the medium- FKM seal rings creating a block chmaber- made as a “run through” block chamber which is flushable
Special marks for ZPDA
• packing glands
- 50 bar standard inlet pressure- combined with a lip seal rings in FKM to create a block chamber- with a central taper to maintain through the bell housing
• magnetically coupling
- 25 bar standard inlet pressure-With a easy to handle and to align by using a HBE bell housing - available in DST standard sizes
Special marks for ZPDA
Advantages of ZPDA
• Beinlich Pump Systems; Germany
+ wide displacement range + well known for customised solutions + knowledge of customer needs + application knowledge + can work on sub-systems: mag-drives (DST), flow-meter (VSE), gear boxes/motors,... + international team for sales and service with partners. + able to work in higher viscosities with ZPD KIS range + small administration with high flexibility
THANKS YOU FOR YOUR INTEREST !!!