Who are we? Our credentials What SolarChill is, what it’s not What is the efficiency secret? Where is the energy consumed now? The part SolarChill plays in the system How SolarChill saves so much energy Official Testing What our customers say Installation examples Applications

Overview

So, let’s first cover who we are…

Boasting efficiencies of up to 70% above comparative non-solar systems

A subsidiary of the international business established in 2009 Engineered and developed by one of the largest companies

in the industry Solar Thermodynamic solutions for Air Conditioning and

Refrigeration Over 50,000 installations worldwide, partnered with most of

the industry leading brands…

Collective European-American, innovation for heating, refrigeration & air temperature control

Just some of our international blue chip customers

Official A/C supplier for FIFA HQ Brazil 2014

Cont…

Subsidiary companies in the USA, Asia, Africa, South America, and Europe

With many secondary dealers across 5 separate continents

MD

MD

MD

MD

MD

MD

MD

MDMaster Dealers

International, actively defended patent pending technology

What SolarChill is…and what it is not

What is SolarChill? • A thermodynamic collection system driven free by the

Sun’s thermal energy. Achieving efficiencies of up to 70% on both inverter and multistage fixed speed compression systems, covering both Refrigeration and Air Conditioning (heating & cooling).

• The only renewable energy technology with a return on investment as low as a matter of months.

SolarChill is not…• …Solar PV. SolarChill requires minimal space and

investment in comparison to Solar PV, and is a considerably more advanced technology in the art of reducing both on and off grid energy usage via renewable sources.

Testing in pure like for like environment conditions, in order to reproduce the average energy saved on a standard commercial 30kW refrigeration system using SolarChill technology - would require an average of 13 Solar PV panels.

=

Where is the energy consumed on standard system?

Compressor energy consumption

The facts are regardless of the compressor in use…

• …DC Inverter• Super DC Inverter• Hyper DC Inverter• Staged Compression• Digital Scroll…

…in general c. 80% of the energy on all systems is consumed by the compressor alone.

Inverter, Digital Scroll & Multistage systems

The general engineering make up the system is designed to produce fluctuating loads, subject to the systems requirement.

Therefore when the load requirement is low, the compressor will logically run at low speed.

Subsequently, when the ambient temperature increases and therefore load requirement is high, the system increases its load capacity, therefore substantially increasing the energy consumption of the compressor.

Inverter & digital scroll systems

The fact is - the hotter it gets, the harder this system works

When the load requirement is low, the stage system is designed to run on reduced compressor numbers (i.e. single stage), commanding additional stages as the load requires.

Therefore as with fluctuating load systems, the hotter it gets, the load requirement from the system increases. In the case of multistage compression, additional compressors enter the phased platform to satisfy load demand.

Staged compression systems

Again…the hotter it gets, the less efficient the system becomes

SolarChill systems

SolarChill substantially reduces energy consumption by increasing the capacity of the compressor, utilizing the 100% renewable energy provided free by the sun.

=+

+ =

The fact is, the hotter it gets, the more efficient SolarChill becomes

Inverter Systems

StagedSystems

So, what is the efficiency secret?

It’s all about the sun…

At this point, we have a distinct change in thermal energy. This in turn raises the internal energy (the sum of all microscopic kinetic and potential energy of the molecules), and the molecules start to move with a higher value of kinetic energy, which simply implies each molecule moves with a higher velocity than before.

As the molecules collide with one another they rebound with higher energies, moreover intermolecular forces weaken and the molecules space out further which results in an increase volume flow…

Collectively creating the most efficient air

temperature control system on the planet

Where SolarChill sits in the system process

The illustration below shows the complete process when the system is in cooling mode. Cloudy Skies

Sunny Skies

6.5

04.5

0 26

kW

VR

F

Sys

tem

4.5

83.2

9 14

kW

Min

i V

RF

S

yste

m

Example EER’s

Retail end refrigeration system

This illustration also shows the cooling mode, with the system in place on retail refrigeration.

• All physical effects yield electricity savings of up to 70%

• Efficiency rated cooling capacity/electrical power consumption: SEER above 8, SCOP above 6

The illustration below shows the complete process when the system is in heating mode.

Cloudy Skies

Sunny Skies

8.0

04.5

0 26

kW

VR

F

Sys

tem

6.1

61

4kW

Min

i V

RF

S

yste

m

3.4

3

Example COP’s

How we save so much energy

Next…

Evaporator

Compressor

Condenser

Staged Compression

System in normal run process

Assuming full load requirement, all compressors will run.

ExpansionValve

Evaporator

ExpansionValve

Compressor

Solar Collector

Condenser

The panel absorbs the UV radiance from the sun. The vacuum tubes become internally hot and therefore heat the refrigerant gas as it passes through

Staged Compression System with SolarChill

At this point, we have a distinct change in thermal energy. This in turn raises the internal energy (the sum of all microscopic kinetic and potential energy of the molecules), and the molecules start to move with a higher value of kinetic energy, which simply implies each molecule moves with a higher velocity than before.

As the molecules collide with one another they rebound with higher energies, moreover intermolecular forces weaken and the molecules space out further which results in an increase volume flow…

Evaporator

Compressor

Solar Collector

CondenserYielding a reduced energy demand as the compressors begin to shut down as the sun takes over the load requirement

Most…if not all of the pressure produced from the additional heat is released in mass volume flow and therefore substantially increased molecular velocity

Staged Compression

ExpansionValve

Thereafter Increasing the

ΔTbetween condensing and

ambient temperatures, effectively increasing the

surface area of the condenser

System with Solar Collection

Those who may be concerned how the condenser addresses any additional heat generated by SolarChill:

First and foremost, the systems condenser is designed to manage the compressors running at full load. The reality is when the sun is in the sky (the time when most systems run at full load), SolarChill will ensure that all compressors virtually never run at full load.

We actually want the heat from the solar panel, utilising the heat (temperature not pressure) we increase the gas molecules kinetic energy, hence increasing the mass volume flow, and additionally creating an improved Delta T therefore enhancing the efficiency of the heat exchanger (condenser).

All Refrigeration and A/C systems are manufactured to a very specific design point, e.g. for A/C systems ISO 5151. This point sets the capacities for the compressor, condenser and all other parts. The facts covered in the second paragraph above allows SolarChill to easily cope with any additional heat, as is shown here and further clarified in third party testing data (T after condenser):

Very important

10kW system without Solar

T-discharge

T-after condenser

10kW system with Solar

T-after panel

T-discharge

T-after condenser

Official testing data

SolarChill

Non solar Inverter

Data Measurement

The illustration below demonstrates the energy usage on a SolarChill DC inverter system in comparison to an identical A+ rated DC inverter system. A clear cut case of ‘the hotter it gets’ the less the SolarChill system works’ – and as importantly the more the comparison A+ system works.

The illustration below is a screenshot of the same live testing facility. Clearly demonstrating all relevant temperatures and pressure points around the system.

Data Measurement

What our customers say

“This technology incorporates a new and exciting element to the thermodynamic energy process. The energy balance shows that with the addition of sun’s UV rays to the process, the energy consumed from the power supply is significantly reduced.” - Francisco Javier Vadillo - Pizza Hut

- Process cooling 33%

- Convenience stores 58%

“At the time the ambient temperature begins to warm-up around 8:00 am, the power of the machine starts a surprising decline into a 6KW position, and remaining there throughout the day’s hottest phase.” -

Chief Engineer -Pizza Hut

“Having collectively reduced the energy usage in seven of our sites by an average in-excess of 36%, they were clearly the right partner for this project. So far they are producing results that are inline with their own projections and therefore well in line with our expectations.” - Richard Cox, Managing Director - The Kay Group (UK Gas Station Retailer)

6-months test results 63% -

- Car show rooms 51%

( Robert Williams, Vice President of Engineering)

Installation examples

England

Cont…

British MOD, Cyprus Bahamas

Middle EastBahamas British MOD, CyprusMalta

Partnered applications

There are virtually no applications that SolarChill can not partner with,

from process cooling…

…to air conditioning,

in both heating & cooling…

…to heavy industry chillers,

through to…Retrofit solutions to existing plant is available on this type of application.

…all types of refrigeration.

Retrofit solutions to existing plant is available on this type of application.

Finally…how does ambient temperature affect SolarChill when the sun is in the sky…

…whether it’s minus 21°c…

…or plus 31°c…

…whilst all other systems work harder…

…rests.

…

The future of heating, cooling &

refrigeration…today!

Visit: www.coolroi.com