001-007 Presentacion 2020-2 · • Center drilling and cooling in glass, stoneware, hard tiles, etc. CAN FOR WATER REFRIGERATION - Capacity: 1,1L. • Other compositions on request

458

PD CPD CPD-100 HPDØ

mm € € € €

PD0500 5,00 CPD0500 CPD0500-100

HPD1

PD0600 6,00CPD0600 CPD0600-100PD0650 6,50

PD0800 8,00

PD0850 8,50CPD0850 CPD0850-100PD0900 9,00

PD1000 10,00

PD1050 10,50 CPD1050 CPD1050-100PD1200 12,00

PD1450 14,50

CPD1450

CPD1450-100

HPD2PD1600 16,00 CPD1600-100

PD1800 18,00 CPD1800-100

PD2000 20,00 CPD2000-100

GBD

GBP

EDP

PD: CPD: HPD:

Construction drill bitsPink

DIAMOND DRILL BITS FOR VERY HARD MATERIAL LIKE STONEWARE, HARD CERAMIC, ETC

GBP

STEP 3Diamondinterchangeable cutter

STEP 1Shank

STEP 5Application and accessories

STEP 4Water cooling

GBD

DIAMONDPOINT

STEP 2The body is adaptedby POly-ClIC quicksystem

Water intake

• 8 holes: Ø 4 - 5 - 6 - 6,5 - 8 - 10 - 12 - 13 mm• Easy adaptation of cooling system.• Fixing with suction pad for a perfect adherence in plane surfaces.• Center drilling and cooling in glass, stoneware, hard tiles, etc.

CAN FOR WATER REFRIGERATION

• Other compositions on request- Capacity: 1,1L.

Content:(1 Ud) PD0500(1 Ud) PD0600(1 Ud) PD0800(1 Ud) PD1000(1 Ud) CPD0500(1 Ud) HPD1(1 Ud) MPDV(1 Ud) CPD0600(1 Ud) CPD0850-100(1 Ud) PDA (Hex Key)

GUIDE FOR CENTERING DRILLS AND DIAMOND CUTTERS

Diamond interchangeable point cutters.

Body length.Available in 50 or 100 mm

Shank with internal water cooling.

DIAMOND CUTTERS SHORT CASE

22,76 €

9,73 € 610,39 €

30,77 43,19 61,55

314,91

36,5436,54 44,73 61,5561,55

61,5567,31 49,35 69,2467,31

67,31 49,35 69,2476,94

88,48

57,84

76,94

390,5098,10 76,94

109,63 76,94

128,86 84,63

459

L1

L2

D1

BW9D1mm

L1x L2mm €

BW90300 3,0 85 x 40BW90350 3,5 85 x 40BW90400 4,0 85 x 45BW90450 4,5 85 x 45BW90500 5,0 85 x 45BW90550 5,5 100 x 60BW90600 6,0 100 x 60BW90650 6,5 100 x 60BW90700 7,0 125 x 70BW90750 7,5 125 x 70BW90800 8,0 125 x 70BW90850 8,5 125 x 70BW90900 9,0 150 x 85BW91000 10,0 150 x 85BW91050 10,5 150 x 85BW91100 11,0 150 x 85

BW99325 BW993184 5

Ø 4 - 5 - 6 - 8 mm Ø 3 - 4 - 5 - 6 - 8 mm

Ømm

3,0 1350 11004,0 1200 10005,0 1100 9206,0 1000 8307,0 900 7408,0 800 6509,0 700 550

10,0 600 50011,0 550 450

CGB

Cons

tructi

on dr

ill bit

sGr

eyPin

k

PROFESSIONAL HIGH PERFORMANCE TILE BITS

Ref. BW9

• The innovation of this drill bit comes from its carbide grade, the welding technique and its revolutionary geometry.• For use with portable or electric drill in rotary mode.• Always cooling with water, using preferably the CGB guide.

APPlICATIONSFor hard and abrasive ceramics, as stoneware or hard tile. This high performance bit will make a hole where all the others have failed.

REFERENCEQUANTITYQUALITY EXTRA-PROFESSIONAL EXTRA-PROFESSIONALCONTENTPRICE €

WATER COOLING GUIDE WITH TANK

Revolutionary tip geometry

CUTTING SPEED R.P.M.

R.P.M.Max.

R.P.M.Min.

ExtraProfessional

Series

• Guide to drill 5-6-7-8-10-12-15-35 mm

106,46 129,67

22,7422,7422,7422,7424,0424,5025,1425,6128,7729,3031,2031,7837,8137,8149,9949,07

10,55 €

460

BW7D1mm

L1x L2mm €

BW704 4,0 80 x 40BW705 5,0 90 x 45BW706 6,0 100 x 55BW708 8,0 120 x 65BW710 10,0 140 x 70

L1

L2

D1

BW793254

STANDARDØ 4 - 5 - 6 - 8 mm

Ømm

4,0 1000 8305,0 900 7406,0 800 6508,0 600 500

10,0 500 400

CGB

Construction drill bitsGrey

Pink

STANDARD HIGH PERFORMANCE TILE BITS

Ref. BW7Standard

series

REFERENCEQUANTITYQUALITYCONTENTPRICE €

• Special application: Due to its cutting geometry this drill is also recommended to drill broken screws and also HARDOX 450 and lowers.

• Always drill in rotary mode• Always cooling with water, using preferably the CGB guide.

APPlICATIONS:• Very hard and abrasives ceramics, tile...


R.P.M.Max.

R.P.M.Min.


• Guide to drill 5-6-7-8-10-12-15-35 mm

6,326,436,43

10,2911,19 33,16

10,55 €

461

CPSD1mm

L1x L2mm €

CPS05 5,0 8,5 67 x 33CPS06 6,0 8,5 67 x 33CPS08 8,0 8,5 80 x 33CPS10 10,0 8,5 80 x 33CPS12 12,0 8,5 80 x 33CPS14 14,0 8,5 80 x 33

L1

L2

D1

CPS93284

Ø 5 - 6 - 8 -10 mm

Ømm

5,0 1200 10006,0 1100 9208,0 900 740

10,0 700 55012,0 600 50014,0 500 400

CGB

PACSE

M14x2Co

nstru

ction

drill

bits

Grey

DIAMOND TILE DRILL BIT

Ref. CPSDiamond

seriesDry

Working

Paraffi n

• Always drill with rotary mode• CPS may drill ceramics without water thanks to its innovative mechanism of autolubrication with paraffi n. Nevertheless, by using water you’ll increase the performance of the drill dramatically• Start drilling with an angle between 15º and 30º and then keep on drilling horizontally. No guide needed• Drill ceramics with soft circulary movements to make easier the further extraction of the core• Before fi nishing, stop pushing strongly to avoid the core to get stucked inside the holesaw• It’s suitable to extract manually the perforated core, after each drilling operation• More holes in less time and with less effort• The internal tank of paraffi n can not be refi lled

REFERENCEQUANTITYCONTENTPRICE €


R.P.M.Max.

R.P.M.Min.

CAN OF PARAFFIN LUBRICANT


• Guide to drill 5-6-7-8-10-12-15-35 mm

Diamond hole saw available p.568 In diam. 5-83 with threaded shank m14x2 for grinder

29,2429,6632,8140,2847,6352,49

132,00

10,55 €

7,85 €

462

CPHD1mm

L1x L2mm €

CPH05 5,0 8,5 55 x 25CPH06 6,0 8,5 55 x 25CPH08 8,0 8,5 55 x 25CPH10 10,0 8,5 55 x 25CPH12 12,0 8,5 55 x 25CPH14 14,0 8,5 55 x 25

L1

L2

D1

CPH93284

Ø 5 - 6 - 8 -10 mm

Ømm

5,0 1100 9206,0 1000 8308,0 800 650

10,0 600 50012,0 500 400

CGB

Construction drill bitsGrey

Pink

DIAMOND TILE DRILL BIT

Ref. CPHDiamond

series



R.P.M.Max.

R.P.M.Min.

• Always drill with rotary mode• Cooling with plenty of water during the drilling operation• CPH drill may drill ceramics whenever some water will be between the diamond and the piece to be machined• Never put the CPH Drill in water after drilling operations. Once the drill achieve high temperatures, let it getting cooled by the air.• Start drilling with an angle between 15º and 30º and then keep on drilling horizontally. No guide• Drill ceramics with soft circulary movements to make easier the further extraction of the core• Before fi nishing, stop pushing strongly to avoid the core to get stucked inside the holesaw• Extract the perforated core by the lateral opening• More holes in less time and with less effort


• Guide to drill 5-6-7-8-10-12-15-35 mm

17,2718,5324,2825,6131,5935,83

10,55 €

85,69

463

L1

L2

D1

BW8D1mm

L1x L2mm €

BW804 4 70 x 30BW805 5 85 x 45BW806 6 100 x 50BW807 7 100 x 50BW808 8 120 x 70BW809 9 120 x 70BW810 10 120 x 70BW812 12 150 x 80

BW89325 BW89328 BW89327 BW894344 4 5 7

Ø 4 -5 -6 -8 mm Ø 5 -6 -8 -10 mm Ø 4 -5 -6 -8 -10 mm Ø 4-5-6-7-8-10-12 mm

DIN8039

Cons

tructi

on dr

ill bit

sGr

ey

CARBIDE TIPPED MULTI-PURPOSE HAMMER DRILLS

Ref. BW8

REFERENCEQUANTITYQUALITY MULTIPURPOSE PROF. MULTIPURPOSE PROF. MULTIPURPOSE PROF. MULTIPURPOSE PROF.CONTENTPRICE €

Multipurpose

Professional

6,506,597,568,689,54

10,9114,0815,10

33,88 43,38 48,46 75,03

464

DIN8039

L1

L2

D1

12,70

12,70

*

150 mm 200 mmD1mm

L1x L2mm €

L1x L2mm €

L1x L2mm €

3 BW103 70x304 BW104 70x305 BW105 85x45 BW105X150 150x806 BW106 100x50 BW106X150 150x80 BW106X200 200x1257 BW107 100x50 BW107X150 150x808 BW108 120x70 BW108X150 150x80 BW108X200 200x1259 BW109 120x70 BW109X150 150x80

10 BW110 120x70 BW110X150 150x80 BW110X200 200x12511 BW111 150x8012 BW112 150x80 BW112X200 200x12513 BW113* 150x8014 BW114* 150x80 BW114X200* 200x12515 BW115* 160x8016 BW116* 160x80 BW116X200* 200x12518 BW118* 160x80 BW118X200* 200x12520 BW120* 160x8022 BW122* 160x8024 BW124* 160x8025 BW125* 160x8030 BW130* 160x80

300 mm 400 mm 600 mmD1mm

L1x L2mm €

L1x L2mm €

L1x L2mm €

6 BW106X300 300x210 BW106X400 400x2808 BW108X300 300x210 BW108X400 400x280

10 BW110X300 300x210 BW110X400 400x280 BW110X600 600x48012 BW112X300 300x210 BW112X400 400x280 BW112X600 600x48013 BW113X300* 300x210 BW113X400* 400x280 BW113X600* 600x48014 BW114X300* 300x210 BW114X400* 400x280 BW114X600* 600x48015 BW115X300* 300x210 BW115X400* 400x280 BW115X600* 600x48016 BW116X300* 300x210 BW116X400* 400x280 BW116X600* 600x48018 BW118X300* 300x210 BW118X400* 400x280 BW118X600* 600x48020 BW120X300* 300x210 BW120X400* 400x280 BW120X600* 600x48022 BW122X300* 300x210 BW122X400* 400x280 BW122X600* 600x48024 BW124X300* 300x210 BW124X400* 400x280 BW124X600* 600x48025 BW125X300* 300x210 BW125X400* 400x280 BW125X600* 600x480

GreyConstruction drill bits

CARBIDE TIPPED HAMMER DRILLS

Ref. BW1

From 13 mm Ø all the drills have reduced shank

SHORT SERIES LONG SERIES

Standardseries

EXTRA LONG SERIES

1,211,231,33 2,381,48 2,38 4,621,75 3,021,93 3,43 4,622,23 4,002,36 4,47 5,813,464,01 6,394,595,86 8,457,578,73 12,52

10,38 14,2812,7614,8519,4118,5236,75

5,99 7,365,99 8,117,11 8,72 10,678,11 10,70 13,419,60 11,11 14,139,87 11,78 16,01

13,29 14,48 19,0313,24 15,53 21,1415,02 17,60 24,1217,99 20,52 28,8122,78 29,77 34,7633,89 34,27 44,8634,27 36,58 45,33

465

DIN8039

BW19325 BW19328 BW193184 4 5

STANDARD STANDARD STANDARDØ 4 - 5 - 6 - 8 mm Ø 5 - 6 - 8 - 10 mm Ø 3 - 4 - 5 - 6 - 8 mm

BW19327 BW19434 BW193195 7 8

STANDARD STANDARD STANDARDØ 4 - 5 - 6 - 8- 10 mm Ø 4 - 5 - 6 - 7 - 8 - 10 - 12 mm Ø 3 - 4 - 5 - 6 - 7 - 8 - 9 -10 mm

Ø 3 Ø 5 Ø 8 Ø 10 Ø 12 Ø 3 Ø 5 Ø 8 Ø 10 Ø 12

2800 1750 1150 1000 800 1800 1000 1000 600 500

Cons

tructi

on dr

ill bit

sGr

ey

CARBIDE TIPPED HAMMER DRILLS IN PLASTIC BOXES

Ref. BW1


BrickSandstonePlasterGypsumAsbestos

Soft material

MarbleCementConcreteBlackboardLimestoneGranite

Hard material



Standardseries

10,66 10,65 11,85

11,89 22,37 17,81

466

DIN8039

L1

L2

D1

12,70

12,70

*

150 mm 200 mmD1mm

L1x L2mm €

L1x L2mm €

L1x L2mm €

3,0 BW603 70x303,5 BW60350 70x304,0 BW604 70x304,5 BW60450 85x455,0 BW605 85x45 BW605X150 150x805,5 BW60550 85x456,0 BW606 100x50 BW606X150 150x80 BW606X200 200x1406,5 BW60650 100x507,0 BW607 100x50 BW607X150 150x808,0 BW608 120x70 BW608X150 150x80 BW608X200 200x1409,0 BW609 120x70

10,0 BW610 120x70 BW610X150 150x80 BW610X200 200x14011,0 BW611 150x8012,0 BW612 150x80 BW612X200 200x14013,0 BW613* 150x8014,0 BW614* 150x80 BW614X200* 200x14015,0 BW615* 160x8016,0 BW616* 160x80 BW616X200* 200x14018,0 BW618* 160x80 BW618X200* 200x14020,0 BW620* 160x8022,0 BW622* 160x8024,0 BW624* 160x8025,0 BW625* 160x80

300 mm 400 mm 600 mm 1000 mmD1mm

L1x L2mm €

L1x L2mm €

L1x L2mm €

L1x L2mm €

6,0 BW606X300 300x200 BW606X400 400x300 BW606X600 600x5008,0 BW608X300 300x200 BW608X400 400x300 BW608X600 600x500

10,0 BW610X300 300x200 BW610X400 400x300 BW610X600 600x50012,0 BW612X300 300x200 BW612X400 400x300 BW612X600 600x500 BW612X1000 1000x90013,0 BW613X300* 300x200 BW613X400* 400x300 BW613X1000* 1000x90014,0 BW614X300* 300x200 BW614X400* 400x300 BW614X600* 600x500 BW614X1000* 1000x90015,0 BW615X300* 300x200 BW615X400* 400x300 BW615X600* 600x500 BW615X1000* 1000x90016,0 BW616X300* 300x200 BW616X400* 400x300 BW616X600* 600x500 BW616X1000* 1000x90017,0 BW617X1000* 1000x90018,0 BW618X300* 300x200 BW618X400* 400x300 BW618X600* 600x500 BW618X1000* 1000x90020,0 BW620X300* 300x200 BW620X400* 400x300 BW620X600* 600x500 BW620X1000* 1000x90022,0 BW622X300* 300x200 BW622X400* 400x300 BW622X600* 600x500 BW622X1000* 1000x90024,0 BW624X300* 300x200 BW624X400* 400x300 BW624X600* 600x500 BW624X1000* 1000x90025,0 BW625X300* 300x200 BW625X400* 400x300 BW625X600* 600x500 BW625X1000* 1000x90026,0 BW626X1000* 1000x90028,0 BW628X1000* 1000x90030,0 BW630X1000* 1000x900


CARBIDE TIPPED HAMMER DRILLS PROFESSIONAL QUALITY

Ref. BW6



EXTRA LONG SERIES

Professionalseries

3,033,253,033,263,06 4,233,333,38 4,67 6,173,863,89 5,474,11 6,52 6,935,055,78 8,53 9,277,528,86 10,75

10,7112,95 17,7515,0516,40 20,6120,46 26,4026,7930,4247,9349,10

9,34 10,55 17,2310,30 10,77 21,5310,92 14,32 21,8914,10 17,95 27,51 80,9916,50 21,64 85,5120,06 23,49 32,83 87,9422,84 27,46 40,97 92,0624,81 27,46 39,39 103,19

110,8429,28 34,13 50,40 115,6235,85 38,62 59,07 118,5043,46 48,95 73,89 119,1548,21 58,90 90,52 142,7051,68 63,23 97,42 150,36

156,24162,13170,39

467

DIN8039

BW69325 BW69328 BW69318 BW693274 4 5 5

Ø 4 - 5 - 6 - 8 mm Ø 5 - 6 - 8 - 10 mm Ø 3 - 4 - 5 - 6 - 8 mm Ø 4 - 5 - 6 - 8 - 10 mm

BW69434 BW693197 8

Ø 4 -5 -6 -7 -8 -10 -12 mm Ø 3 -4 -5 -6 -7 -8 -9-10 mm

Ø 3 Ø 5 Ø 8 Ø 10 Ø 12 Ø 3 Ø 5 Ø 8 Ø 10 Ø 12

3200 1900 1300 1100 900 2100 1200 900 700 600

Cons

tructi

on dr

ill bit

sGr

ey

CARBIDE TIPPED HAMMER DRILLS PROFESSIONAL QUALITY IN PLASTIC BOXES

Ref. BW6


BrickSandstonePlasterGypsumAsbestos

Soft material

MarbleCementConcreteBlackboardLimestoneGranite

Hard material

REFERENCEQUANTITYQUALITY PROFESSIONAL SERIES PROFESSIONAL SERIES PROFESSIONAL SERIES PROFESSIONAL SERIESCONTENTPRICE €

REFERENCEQUANTITYQUALITY PROFESSIONAL SERIES PROFESSIONAL SERIESCONTENTPRICE €

Professionalseries

18,20 22,06 21,13 23,76

38,96 37,66

468

DIN8039

L1

L2

D1

BW159325 BW159328 BW159318 BW1593274 4 5 5

Ø 4 - 5 - 6 - 8 mm Ø 5 - 6 - 8 - 10 mm Ø 3 - 4 - 5 - 6 - 8 mm Ø 4 - 5 - 6 - 8 - 10 mm

BW159434 BW1593197 8

Ø 4 -5 -6 -7 -8 -10 -12 mm Ø 3 -4 -5 -6 -7 -8 -9-10 mm

12,70

12,70

*

150 mm 250 mmD1mm

L1x L2mm €

L1x L2mm €

L1x L2mm €

3,0 BW1503 70x303,5 BW150350 70x304,0 BW1504 70x304,5 BW150450 85x455,0 BW1505 85x45 BW1505X150 150x805,5 BW150550 85x45 BW150550X150 150x806,0 BW1506 100x50 BW1506X150 150x806,5 BW150650 100x50 BW150650X150 150x807,0 BW1507 100x50 BW1507X150 150x808,0 BW1508 120x70 BW1508X250 250x1909,0 BW1509 120x70

10,0 BW1510 120x70 BW1510X250 250x19011,0 BW1511 150x8012,0 BW1512 150x80 BW1512X250 250x19013,0 BW1513* 150x8014,0 BW1514* 150x80 BW1514X250* 250x19015,0 BW1515* 160x8016,0 BW1516* 160x8018,0 BW1518* 160x8020,0 BW1520* 160x80


CARBIDE TIPPED HAMMER DRILLS EXTRA PROFESSIONAL QUALITY

Ref. BW15


REFERENCEQUANTITYQUALITY EXTRA-PROFESSIONAL EXTRA-PROFESSIONALCONTENTPRICE €

REFERENCEQUANTITYQUALITY EXTRA-PROFESSIONAL EXTRA-PROFESSIONAL EXTRA-PROFESSIONAL EXTRA-PROFESSIONALCONTENTPRICE €

SHORT SERIES LONG SERIES EXTRA LONG SERIES

Extra Professional

series

Ref. BW15: Available until end of stock

5,225,705,226,155,28 7,686,23 9,185,81 8,237,21 8,685,81 11,666,98 12,128,568,61 13,389,95

11,64 17,8815,6218,97 20,6022,8624,5228,7537,72

27,17 31,93 32,39 35,75

56,54 56,65

469

L1

L2

D1

BW169325 BW169327 BW1694344 5 7

Ø 4 - 5 - 6 - 8 mm Ø 4 - 5 - 6 - 8 - 10 mm Ø 4 - 5 - 6 - 7 - 8 - 10 -12 mm

150 mm 200 mm 400 mmD1mm

L1x L2mm €

L1x L2mm €

L1x L2mm €

L1x L2mm €

4,0 BW1604 75x385,0 BW1605 85x45 BW1605X150 150x456,0 BW1606 100x55 BW1606X150 150x55 BW1606X200 200x557,0 BW1607 100x648,0 BW1608 120x70 BW1608X150 150x70 BW1608X200 200x709,0 BW1609 120x80

10,0 BW1610 120x90 BW1610X150 150x90 BW1610X200 200x9012,0 BW1612 150x110 BW1612X200 200x11014,0 BW1614* 150x130 BW1614X200* 200x13016,0 BW1616* 150x150 BW1616X200* 200x15018,0 BW1618* 160x160 BW1618X400* 400x16020,0 BW1620* 160x180 BW1620X400* 400x180

12,70

*

Cons

tructi

on dr

ill bit

sGr

ey

CARBIDE TIPPED CONCRETE HAMMER DRILL EXTRA PROFESSIONAL QUALITY

Ref. BW16

REFERENCEQUANTITYQUALITY EXTRA-PROFESSIONAL EXTRA-PROFESSIONAL EXTRA-PROFESSIONALCONTENTPRICE €

SHORT SERIES LONG SERIES EXTRA LONG SERIES

Extra Professional

series


19,56 25,54 41,87

3,253,29 4,543,63 5,01 6,644,194,65 7,37 7,845,716,53 9,64 10,48

10,02 12,1614,64 20,0718,55 23,3023,14 38,6030,30 43,67

470

130˚

L1

L2

D1

STANDARD

200 mmD1mm

L1x L2mm €

L1x L2mm €

5 BW3505 100x45 BW3505X150 150x1106 BW3506 100x60 BW3506X150 150x1108 BW3508 120x80 BW3508X200 200x160

10 BW3510 120x80 BW3510X200 200x16012 BW3512 150x110 BW3512X200 200x160

BW3593284

DElTA 3 PlUSØ 5 - 6 - 8 - 10 mm


Ref. BW35


THREE EDGE MASONRY DRILL BIT DELTA 3 PLUS

• Drill always with percussion mode• Innovative geometry of the tip. 3 edge monoblock tip• Centered, Rounded and accurate holes• 3 fl utes for an improved dust removal and an improved lifetime of the drill bit• Minimum wear of the drill bit• Less effort and higher performance

REFERENCEQUANTITYQUALITYCONTENTPRICE € 27,74

4,54 8,044,58 8,195,65 10,027,52 13,28

10,59 14,46

471

SDSPlus

WTD1mm

L1mm

D2mm

L2mm €

WT08x27 8 103 16 27 M6WT10x33 10 103 22 33 M8WT12x43 12 113 22 43 M10WT15x54 15 128 22 54 M12

M6 8 25M8 10 30M10 12 40M12 15 50

L1

L2

D1

D2

Cons

tructi

on dr

ill bit

sGr

ey

SDS PLUS HAMMER DRILL WITH STOPPER FOR PREVIOUS HOLES FOR METALLIC ANCHORAGES

Ref. WT

• Carbide tipped monoblock with self-centering.• Hole centering, prevents the slide effect. More accuracy.• Straight extraction fl ute. In short length the extraction volume is increased• Depth stopper, control of the hole length• Stopper which allows repetitive drill operations with full accuracy• Better quality of the hole.

APPlICATIONS:

• Special for works with repetitive drilling operations which require depth control.• Appropriate for the previous holes for placing metallic anchorages in concrete.• Allows the assembly of fastening systems which require accurate and regular holes.• Commonly used to install grandstands, refrigeration systems, rack systems, etc.

VERY IMPORTANT:The material to drill must be solid, Concrete, Reinforced Concrete, Stone, Brick. If the previous hole is made in a lightweight material the anchorage will not bear up.

• Metal threaded anchorages, wedge anchor Special for solid materials.

ThreadAnchorage

METAL THREADED ANCHORAGESINTERNAL THREAD

previous hole Ø (mm)

anchorage length (mm)

22,2425,0327,4735,25

472

SDSPlus

L1

L2

D1

W08L1 x L2 (mm)

D1mm

110x50 160x100 200x150 250x200 300x250 450x400 600x550 800x750 1000x950 1400x1350

€ € € € € € € € € €

3,00 3,50 4,00 5,00 5,50 6,00 6,50 7,00 8,00 9,00

10,00 11,00 12,00 13,00 14,00 15,00 16,00 17,00 18,00 19,00 20,00 22,00 24,00 25,00 26,00 28,00 30,00


PROFESSIONAL HAMMER DRILL BITS SDS PLUS

Ref. W08

• Self centering carbided tipped point.• Higher durability.• Spiral fl utes for improved dust removal.• Accurate drill holes thanks to reduced friction.• Long lifetime thanks to minimum friction in fl utes and head point.

• Easier drilling thanks to higher dust removal.• For use in rotary hammer machines with SDS PLUS shank

APPlICATIONS• Concrete and construction materials, marble, granite, blackboard, stone.

5,45 5,455,515,79 6,254,75 6,04 9,58 11,50 12,25 16,785,54 6,43 11,49 13,994,89 5,63 8,47 11,85 16,36 18,395,85 6,35 13,14 13,46 17,34 19,206,15 6,79 9,63 25,675,99 6,20 7,65 10,25 16,75 22,84 39,71

7,82 9,57 11,646,42 7,69 9,33 11,25 15,45 24,50 35,99 65,25 85,25

8,99 10,01 13,028,63 10,61 13,07 19,41 24,75 37,00 82,259,36 12,36 16,71

11,85 15,31 16,85 20,77 27,46 40,81 96,7115,72 20,35 33,44

19,17 20,26 22,25 32,66 43,87 70,25 109,79 155,3625,7425,94 33,36 37,29 59,22 114,25 165,3631,68 39,2329,64 39,12 48,26 66,86 118,25 184,25

37,20 53,44 76,36 119,36 215,2543,75 66,35 156,3646,89 60,71 85,08 132,25 241,2549,10 76,83 265,36

113,33 121,80 145,25 185,25 285,36135,75 155,60 196,36 256,36

473

SDSPlus

W08D9358 W08D9412 W08D9319 W08D93204 6 4 5

Ø 5 -6 -8 -10 x 110 mm Ø 5-6-8x110 mm Ø 6-8-10x160 mm Ø 5 -6 -8 -10 x 160 mm Ø 5-6-x110 mm Ø 6-8-10x160 mm

W08D0080 W08D07087 6

Ø 5-6-8 x 110 mm Ø 6-8-10-12 x 160 mm Ø 6 x 110 mm Ø 6-8-10-12-14 x 160 mm

10 U.L1 x L2 (mm)

Ømm

110x50 160x100 200x150

€ € €5,06,08,010,012,0

50 U.L1 x L2 (mm)

Ømm

160x100

€6,08,0

Cons

tructi

on dr

ill bit

sGr

ey


Ref. W08

W08 DRILLS 10 UNITS BOX W08 DRILLS 50 UNITS BOX



27,04 41,40 30,56 35,01

50,78 51,89

45,10 57,2646,41 53,51 80,3958,52 58,99 74,4162,61 73,11 88,71

81,91 100,90

250,45262,62

474

SDSPlus

L1

L2

D1

W05L1 x L2 (mm)

D1mm

110x50 160x100 200x150 250x200 265x215 300x250 350x300 450x400 465x415 600x550 800x750 1000x950€ € € € € € € € € € € €

3,00 3,50 4,00 5,00 5,50 6,00 6,50 7,00 8,00 8,50 9,00 9,50

10,00 11,00 12,00 13,00 14,00 15,00 16,00 17,00 18,00 19,00 20,00 22,00 23,00 24,00 25,00 26,00



Ref. W05

* Till end of stock

Professionalseries

• Self centering high performance carbided tipped point.• Higher drilling speed and better durability.• 4 spiral fl utes for faster drilling and fast dust removal.• Accurate drill holes thanks to reduced friction.• Longer lifetime thanks to minimun friction in fl utes and head point.

• Easier drilling thanks to faster drilling and dust removal.• For use in rotary hammer machines with SDS PLUS shank


15,32 17,2013,38 13,71

6,44 10,965,27 6,71 10,65 14,25 16,26 33,256,16 7,14 12,77 17,845,43 6,26 9,41 13,97 19,25 31,716,93 7,65 14,60 14,96 19,276,93 7,65 12,26 16,13 20,38 28,526,83 6,88 8,70 12,66 19,33 25,38 44,13

11,438,83 10,63 12,94

10,86*7,33 8,55 10,37 13,12 17,63 23,77 27,23 39,99 104,86

10,58 12,85* 14,47 26,70*9,59 11,79 14,52 21,57 28,25 41,25 98,88

15,12 19,69 18,5615,48 17,01 19,00 23,08 30,51 45,34 107,4517,46 22,61 37,16

21,30 23,42 26,51 36,29 48,74 74,66* 121,9928,60 48,12 52,3628,82 38,40 41,43 67,06 146,1335,20 43,59 48,4532,94 45,25 53,62 74,29 153,82

41,33 59,37 96,55 158,0858,65*48,61 73,7352,10 67,45 98,25 173,1654,56 85,36

475

SDSPlus

W05D9358 W05D9412 W05D9319 W05D93204 6 4 5

Ø 5 -6 -8 -10 x 110 mm Ø 5-6-8x110mm Ø 6-8-10x160 mm Ø 5 -6 -8 -10 x 160 mm Ø 5-6-x110mm Ø 6-8-10x160mm

W05D0080 W05D07087 6


10 U.L1 x L2 (mm)

Ømm

110x50 160x100 200x150

€ € €5,06,08,010,012,0

50 U.L1 x L2 (mm)

Ømm

160x100

€6,08,0

Cons

tructi

on dr

ill bit

sGr

ey


Ref. W05


REFERENCEQUANTITYQUALITY PROFESSIONAL PROFESSIONAL PROFESSIONAL PROFESSIONALCONTENTPRICE €

REFERENCEQUANTITYQUALITY PROFESSIONAL PROFESSIONALCONTENTPRICE €

Professionalseries

29,87 45,48 33,40 38,25

55,82 59,19

47,48 60,2848,85 56,33 84,6261,60 62,10 78,3265,90 76,96 93,38

86,22 106,22

272,23285,46

476

L1

L2

D1

W55L1 x L2 (mm)

D1mm

110x50 160x100 210x160 250x200 300x250 460x410 600x550 800x750 1000x950

€ € € € € € € € €

5,06,06,58,0

10,012,014,016,018,020,022,024,025,028,030,032,035,038,040,0

4 ZSDSPlus


4 EDGE HAMMER DRILL BITS (OPTIMAL CENTERING)

Ref. W55

4 EDGES

Extra Professional

series

• 4 Carbide edges. High performance• Higher effi ciency • Centering of the drill, accurate holes and fi nishing• Higher lifetime due to reduced friction

• For use in rotary hammer machines with SDS PLUS shank


7,33 9,13 13,70 15,72 20,627,52 9,14 12,62 15,09 20,70 32,50 9,08 9,61 16,01 16,33 20,83 32,54 9,48 9,67 13,76 15,66 22,36 32,59 54,55

10,16 11,77 15,38 18,08 26,10 35,98 52,42 142,29 142,9413,29 16,37 20,39 28,49 39,22 60,14 145,5519,51 23,59 26,36 32,00 42,34 64,47 151,24

32,24 49,95 69,75 108,93 167,8944,91 57,02 95,97 201,1248,07 73,82 106,33 211,6855,75 81,71 132,88 217,5565,58 101,47 147,84 232,6970,30 92,83 154,19 247,84

149,82 161,01 198,01 253,90179,47 205,70 252,96 317,24143,89 200,05 188,50 230,21 206,29 265,57 242,69 302,90

477

W55D9358 W55D9412 W55D9319 W55D93204 6 4 5

Ø 5 -6 -8 -10 x 110 mm Ø 5-6-8x110 mm Ø 6-8-10x160 mm Ø 5 -6 -8 -10 x 160 mm Ø 5-6-x110 mm Ø 6-8-10x160 mm

W55D0080 W55D07087 6


10 U.L1 x L2 (mm)

Ømm

110x50 160x100 210x150

€ € €5,06,08,010,012,0

50 U.L1 x L2 (mm)

Ømm

160x100

€6,08,0

4 ZSDSPlus

Cons

tructi

on dr

ill bit

sGr

ey

Extra Professional

series

4 EDGE HAMMER DRILL BITS (OPTIMAL CENTERING)


REFERENCEQUANTITYQUALITY EXTRA PROFESSIONAL EXTRA PROFESSIONAL EXTRA PROFESSIONAL EXTRA PROFESSIONALCONTENTPRICE €

REFERENCEQUANTITYQUALITY EXTRA PROFESSIONAL EXTRA PROFESSIONALCONTENTPRICE €

Ref. W55

39,50 61,17 44,72 51,29

75,21 77,91

69,65 86,7571,43 86,85 119,8490,11 91,88 130,7196,53 111,84 146,13

126,27 155,51

420,51444,91

478

Super

L1L2

D1

120 mm 170 mm 220 mm 270 mmØ

mmL1x L2mm €

L1x L2mm €

L1x L2mm €

L1x L2mm €

3,0 W8803X120 120x50 W8803X170 170x1004,0 W8804X120 120x50 W8804X170 170x1005,0 W8805X120 120x50 W8805X170 170x100 W8805X220 220x150 W8805X270 270x2006,0 W8806X120 120x50 W8806X170 170x100 W8806X220 220x150 W8806X270 270x2006,5 W880650X120 120x50 W880650X170 170x100 W880650X220 220x150 W880650X270 270x2007,0 W8807X120 120x50 W8807X170 170x100 W8807X220 220x1508,0 W8808X120 120x50 W8808X170 170x100 W8808X220 220x150 W8808X270 270x200

10,0 W8810X120 120x50 W8810X170 170x100 W8810X220 220x150 W8810X270 270x20012,0 W8812X170 170x100 W8812X220 220x150 W8812X270 270x20013,0 W8813X170 170x100 W8813X220 220x15014,0 W8814X170 170x100 W8814X220 220x150 W8814X270 270x20016,0 W8816X220 220x150 W8816X270 270x200

320 mm 370 mm 470 mmØ

mmL1x L2mm €

L1x L2mm €

L1x L2mm €

5,0 W8805X320 320x250 W8805X370 370x3006,0 W8806X320 320x250 W8806X470 470x4006,5 W880650X320 320x2508,0 W8808X320 320x250 W8808X370 370x300 W8808X470 470x400

10,0 W8810X320 320x250 W8810X370 370x300 W8810X470 470x40012,0 W8812X320 320x250 W8812X470 470x40014,0 W8814X320 320x250 W8814X370 370x300 W8814X470 470x40016,0 W8816X320 320x250 W8816X470 470x40018,0 W8818X320 320x250 W8818X470 470x40020,0 W8820X320 320x250 W8820X470 470x400

SDSPlus


Ref. W88DeltaTOP

series


EXTRA LONG SERIES

DELTATOP PROFESSIONAL HAMMER DRILL BITS SDS PLUS SHANK WITH 3 CUTTING EDGE SOLID CARBIDE HEAD

REINFORCED CONCRETE HAMMER DRILL BITS SDS PLUS SHANK WITH 4 CUTTING EDGE SOLID CARBIDE HEAD

9,01 9,389,01 9,389,01 9,38 17,65 18,138,76 9,99 14,70 16,29

11,38 11,86 16,63 19,5510,80 11,87 20,1910,47 10,47 14,70 16,4612,04 12,22 16,70 18,30

14,70 17,18 21,7017,01 23,3021,55 24,83 27,28

32,77 35,01

24,78 26,3620,71 34,0724,8423,50 27,25 35,5627,55 28,91 38,2028,75 42,1132,28 36,73 46,0637,58 62,7748,27 67,4454,73 77,36

479

Super

DElTATOP

W88D9358 W88D9412 W88D9319 W88D93204 6 4 5

Ø 5 -6 -8 -10 x 120 mm Ø 5-6-8x120mm Ø 6-8-120x170 mm Ø 5 -6 -8 -10 x 170 mm Ø 5-6-x120mm Ø 6-8-10x170 mm

W88D0080 W88D07087 6


SDSPlus

Cons

tructi

on dr

ill bit

sGr

ey

Ref. W88

Standard drill DeltaTop

REFERENCEQUANTITYQUALITY DElTATOP SERIES DElTATOP SERIES DElTATOP SERIES DElTATOP SERIESCONTENTPRICE €

REFERENCEQUANTITYQUALITY DElTATOP SERIES DElTATOP SERIESCONTENTPRICE €

Concrete

Concrete

Rebar

DeltaTOPseries

Improved drilling in reinforced concrete.Drills into a concrete steel rebar when it does not cover more than 1/3 of the tipExclusive features that offer superiorperformance to any other drill bit and reduces the cost per hole.

Penetrate through sheet plates.Drill into metal deck plate up to 1mm thick and then concrete.

Innovative carbide head welding technology.Supports continuous and greatefforts and pressure in reinforcedconcrete.

ADVANTAGES


DELTATOP PROFESSIONAL HAMMER DRILL BITS SDS PLUS SHANK WITH 3 CUTTING EDGE SOLID CARBIDE HEAD

45,28 67,17 47,07 56,30

82,63 84,69

480

4 Z

L1L2

D1

SDSPlus

W77L1 x L2 (mm)

D1mm

115x50 165x100 215x150 250x200 265x200 315x250 365x300 450x400 465x400 600x550 1000x950

€ € € € € € € € € € €

5,005,506,006,507,008,009,00

10,0011,0012,0013,0014,0015,0016,0017,0018,0020,0022,0024,0025,0028,0030,00



Ref. W77

4 CUTTING EDGE SOlID CARBIDE HEAD

Exceptional impact resistance.Point specially designed for

reinforced concrete.

Self-centering 90º angled point for perfectly centered hole

4 fl ute high performance design increasing dust removal volume and

decreasing drill wear

Side wear marks

• 4 cutting edge solid carbide head.• Maximum performance and durability in reinforced concrete.• Drill faster and easier in high resistance reinforced concrete, with the best drill.• SDS-Plus Shank

• Faster dust removal thanks to its 4 fl utes

APPlICATIONS:

• Reinforced concrete, concrete and masonry

9,92 11,81 19,91 20,25 25,01 34,7911,11 12,50 17,46 27,80 37,58

9,92 10,83 18,44 20,47 23,15 34,7912,85 14,11 16,63 24,45 29,6913,55 14,81 17,1812,85 12,99 15,51 20,65 28,50 36,60 44,36

12,99 13,9915,09 15,30 18,23 22,98 28,62 34,23 42,25

17,35 20,82 24,5518,37 21,51 25,25 28,75 46,38 48,6220,15 25,55 30,6027,03 30,74 34,23 36,25 45,96 57,7033,11 44,43 55,74

39,40 43,87 37,58 78,5169,66 96,01

80,50 99,44 128,88 259,8294,50 105,36 208,90 298,05

116,05 154,41 208,90 315,62172,60176,10 257,76 358,78196,14209,59

481

W77D9358 W77D9412 W77D9319 W77D93204 6 4 5

Ø 5 - 6 - 8 - 10 x 115 mm Ø 5 - 6 - 8 x 115 mmØ 6 - 8 - 10 x 165 mm Ø 5 - 6 - 8 - 10 x 165 mm Ø 5 - 6 x 115 mm

Ø 6 - 8 - 10 x 165 mm

4 Z

10 U.L1 x L2 (mm)

Ømm

115x50 165x100 215x150

€ € €5,06,08,010,012,0

50 U.L1 x L2 (mm)

Ømm

165x100

€6,08,0

W77D0080 W77D07087 6

Ø 5 - 6 - 8 x 115 mmØ 6 - 8 - 10 - 12 x 165 mm

Ø 6 x 115 mmØ 6 - 8 - 10 - 12 - 14 x 165 mm

SDSPlus

Cons

tructi

on dr

ill bit

sGr

ey

REFERENCEQUANTITY

CONTENT

PRICE €


Ref. W77


REFERENCEQUANTITY

CONTENT

PRICE € 97,18 101,44

89,27 106,2589,27 97,44 165,97

115,68 116,93 139,57135,79 137,68 164,08

165,34 193,63

470,98565,18

52,78 78,06 55,92 64,81

482

REBD1mm

L1mm

L2mm

Z €

REB10X300 10 300 80 4REB12X300 12 300 80 4REB14X300 14 300 80 4REB16X300 16 300 80 6REB18X300 18 300 80 6REB20X300 20 300 80 6REB22X300 22 300 80 8REB26X300 26 300 80 8REB28X300 28 300 80 10REB32X300 32 300 80 10

SDSPlus Z

4 -12


Ref. REB

REBAR CUTTER

ROTATION

1. Use the Rebar cutter with water and only in rotation mode.2. Once the rebar is cut, remove the metal chips from the hole with a magnet. If not, the hammer drill you will use to drill the concrete, won’t be able to work properly.

32,9335,7039,3147,1750,2551,4357,9462,4568,3177,14

483

SDSMax

QTD1mm

L1x L2mm €

QT12X340 12 340x200QT12X540 12 540x400QT12X740 12 740x600QT12X940 12 920x800QT14X340 14 340x200QT14X540 14 540x400QT14X740 14 740x600QT14X940 14 920x800QT15X340 15 340x200QT15X540 15 540x400QT16X340 16 340x200QT16X540 16 540x400QT16X740 16 740x600QT16X940 16 920x800QT16X1340 16 1320x1200QT17X340 17 340x200QT17X540 17 540x400QT18X340 18 340x200QT18X540 18 540x400QT18X720 18 740X600QT18X940 18 920X800QT18X1320 18 1320X1200

L1

L2

D1

QTD1mm

L1x L2mm €

QT19X320 19 320x200QT19X520 19 520x400QT20X320 20 320x200QT20X520 20 520x400QT20X720 20 720x600QT20X920 20 920x800QT20X1320 20 1320x1200QT22X320 22 320x200QT22X520 22 520x400QT22X720 22 720x600QT22X920 22 920x800QT22X1320 22 1320x1200QT24X320 24 320x200QT24X520 24 520x400QT25X320 25 320x200QT25X520 25 520x400QT25X720 25 720x600QT25X920 25 920x800QT25X1320 25 1320x1200QT26X320 26 320x200QT26X520 26 520x400QT28X320 28 320x200

QTD1mm

L1x L2mm €

QT28X520 28 520x400QT28X720 28 720x600QT28X920 28 920x800QT28X1320 28 1320x1200QT30X320 30 320x200QT30X520 30 520x400QT32X320 32 320x200QT32X520 32 520x400QT32X720 32 720x600QT32X920 32 920x800QT35X520 35 520x400QT35X720 35 720x600QT35X920 35 920x800QT35X1320 35 1320x1200QT38X520 38 520x400QT38X720 38 720x600QT40X520 40 520x400QT40X720 40 720x600QT40X920 40 920x800QT40X1320 40 1320x1200

Cons

tructi

on dr

ill bit

sGr

ey

SDS MAX HAMMER DRILL BITS

Ref. QT

4 EDGES

• Self centering high performance carbided tipped point.• Higher drilling speed and better durability.• 4 spiral fl utes for faster drilling and fast dust removal.• Accurate drill holes thanks to reduced friction.• Longer lifetime thanks to minimun friction in fl utes and head point.

• Easier drilling thanks to faster drilling and dust removal.• For use in rotary hammer machines with SDS Max shank


50,3459,3375,10

109,6154,7162,5788,69

114,3457,4163,4968,5577,7691,92

115,26255,16

72,5882,8974,5584,41

100,92116,95260,17

77,0085,8479,1186,11

115,57132,94263,54

80,1492,12

118,11139,56267,63

83,7198,0786,3798,68

132,60153,08279,08105,33108,55106,90

114,01146,27183,13317,84107,70118,73116,40143,55191,74232,10171,36194,74278,43411,59207,57244,20247,46282,40305,96490,24

484

SDSMax

AXD1mm

L1x L2mm €

AX12.0X340 12 340x200AX12.0X540 12 540x400AX12.0X740 12 740x550AX12.0X940 12 940x800AX13.0X340* 13 340x200AX13.0X540* 13 540x400AX14.0X340 14 340x200AX14.0X540 14 540x400AX14.0X740 14 740x600AX14.0X940 14 940x800AX15.0X340 15 340x200AX15.0X540 15 540x400AX16.0X340 16 340x200AX16.0X540 16 540x400AX16.0X740 16 740x600AX16.0X940 16 940x800AX16.0X1340 16 1340x1200AX17.0X340 17 340x200AX17.0X540 17 540x400AX18.0X340 18 340x200AX18.0X540 18 540x400AX18.0X720 18 720x600AX18.0X940 18 940x800AX18.0X1320 18 1320x1200AX19.0X320 19 320x200AX19.0X540 19 520x400AX20.0X320 20 320x200AX20.0X520 20 520x400

L1

L2

D1

AXD1mm

L1x L2mm €

AX20.0X720 20 720x600AX20.0X920 20 920x800AX20.0X1320 20 1320x1200AX22.0X320 22 320x200AX22.0X520 22 520x400AX22.0X720 22 720x600AX22.0X920 22 920x800AX22.0X1320 22 1320x1200AX24.0X320 24 320x200AX24.0X520 24 520x400AX24.0X1500 24 1500x1320AX25.0X320 25 320x200AX25.0X520 25 520x400AX25.0X720 25 720x600AX25.0X920 25 920x800AX25.0X1320 25 1320x1200AX25.0X1500 25 1500x1320AX26.0X320 26 320x200AX26.0X520 26 520x400AX28.0X320 28 320x200AX28.0X520 28 520x400AX28.0X720 28 720x530AX28.0X920 28 920x800AX28.0X1320 28 1320x1200AX28.0X1500 28 1500x1320AX30.0X320 30 320x200AX30.0X520 30 520x400AX32.0X320 32 320x200

AXD1mm

L1x L2mm €

AX32.0X520 32 520x400AX32.0X720 32 720x600AX32.0X920 32 920x800AX32.0X1320 32 1320x1200AX32.0X1500 32 1500x1320AX35.0X520 35 520x400AX35.0X720 35 720x530AX35.0X920 35 920x800AX35.0X1320 35 1320x1200AX36.0X1500 36 1500x1320AX38.0X520 38 520x400AX38.0X720 38 720x600AX40.0X520 40 520x400AX40.0X720 40 720x600AX40.0X920 40 920x800AX40.0X1320 40 1320x1200AX40.0X1500 40 1500x1320AX42.0X1500 42 1500x1320AX45.0X520 45 520x400AX45.0X1500 45 1500x1320AX52.0X520 52 520x400

SDSMax

160 mm

L1

D1

AXD1mm

L1x L2mm €

AX45.0X590 45,0 590x450AX45.0X990 45,0 990x850AX55.0X590 55,0 590x450AX55.0X990 55,0 990x850AX65.0X590 65,0 590x450AX65.0X990 65,0 990x850AX80.0X590 80,0 590x450AX80.0X990 80,0 990x850


SDS MAX HAMMER DRILL BITS

Ref. AX

2 EDG

ES

SDS MAX BREAKTHROUGH ONE PIECE DRILL BITS FOR DRILLING LARGE DIAMETERS FROM Ø 45 TO 80 MM

Ref. AX

Professionalseries

Professionalseries

*Until end of stock

4 EDGES

505,03543,92565,30621,07625,15702,56731,52855,26

74,1287,34

110,56161,3781,73*92,03*80,5492,11

130,57168,33

84,51102,80100,92114,48135,33169,70375,65106,86122,03108,25124,27148,58172,18383,03113,37126,37106,49126,78

170,14195,72387,99117,98135,62173,88205,47394,01123,25144,38392,62127,16145,27195,22225,37410,25410,62155,07158,25156,36167,85215,34269,61467,94521,30158,55174,79171,36*

211,33254,32307,83516,51586,86227,29258,29369,28545,90637,74275,30336,12328,22388,69405,80650,21780,25819,66375,69901,72496,87

485

4 Z

X4AXD1mm

L1x L2mm €

X4AX12X340 12 340x200X4AX12X540 12 540x400X4AX12X740 12 740x600X4AX12X940 12 940x800X4AX14X340 14 340x200X4AX14X540 14 540x400X4AX14X740 14 740x600X4AX14X940 14 940x800X4AX16X340 16 340x200X4AX16X540 16 540x400X4AX16X740 16 740x600X4AX16X940 16 940x800X4AX18X340 18 340x200X4AX18X540 18 540x400X4AX18X740 18 740X600X4AX18X940 18 940X800X4AX20X320 20 320x200X4AX20X520 20 520x400

X4AXD1mm

L1x L2mm €

X4AX20X720 20 720x600X4AX20X920 20 920x800X4AX22X320 22 320x200X4AX22X520 22 520x400X4AX22X720 22 720x600X4AX22X920 22 920x800X4AX24X320 24 320x200X4AX24X520 24 520x400X4AX25X320 25 320x200X4AX25X520 25 520x400X4AX25X720 25 720x600X4AX25X920 25 920x800X4AX26X320 26 320x200X4AX26X520 26 520x400X4AX28X320 28 320x200X4AX28X520 28 520x400X4AX28X720 28 720x600X4AX28X920 28 920x800

SDSMax

L1

L2

D1

Cons

tructi

on dr

ill bit

sGr

ey

REINFORCED CONCRETE HAMMER DRILL BITS SDS MAX SHANK WITH 4 CUTTING EDGE SOLID CARBIDE HEAD

Ref. X4AX

HighPerformance

• 4 cutting edge solid carbide head.• Maximum performance and durability in reinforced concrete.• Drill faster and easier in high resistance reinforced concrete, with the best drill.• SDS-Max Shank

• Faster dust removal thanks to its 4 fl utes

APPlICATIONS:• Reinforced concrete, concrete and masonry

4 CUTTING EDGE SOLID CARBIDE HEAD

Point specially designed for reinforced concrete.

Self-centering 90º angled point for perfectly centered hole

4 fl ute high performance design increasing dust removal volume and

decreasing drill wear

Side wear marks

101,88120,13170,31228,09113,28135,33180,95231,13122,41142,94187,03234,17126,67150,99192,96234,78133,36153,58

196,31241,47142,63161,94204,37244,81155,25170,91155,25179,58234,78291,80175,92202,90181,11204,90242,12305,88

486

L1

L2

D1D2

BC70..BD1 mm

D2 mm

L2 mm

L1 mm €

BC700400B 4 6,0 25 45BC700500B 5 6,0 25 45BC700600B 6 6,0 30 66BC700700B 7 6,0 30 66BC700800B 8 6,0 30 66BC700900B 9 6,0 30 66BC701000B 10 6,0 30 66BC701200B 12 6,5 20 66BC701400B 14 6,5 20 66BC701500B 15 6,5 20 66BC701600B 16 6,5 20 66BC701800B 18 6,5 20 66BC702000B 20 6,5 20 66

Construction drill bitsPink

ELECTRODEPOSITED DIAMOND HOLESAW FOR GLASS

Ref. BC70..B

Given the characteristics and small diameter of these holesaws it is important to keep in mind that they do not come with a pilot drill. For portable drilling machines, we highly recommend making an exterior guide (see picture). In stationary machines, both workpiece and the machine should be securely fastened.

Example of exterior guide forworking with portable machines

Diamondseries

7,539,15

10,6812,2013,0814,5816,1120,0125,4629,3932,5535,6938,73

487

BC90BD1mm

D2mm

L1mm €

BC9003B 3,0 2,5 65BC9004B 4,0 3,0 65BC9005B 5,0 4,0 65BC9006B 6,0 4,0 65BC9008B 8,0 6,0 70BC9010B 10,0 8,0 80BC9012B 12,0 10,0 80BC9014B 14,0 10,0 80

BC909325 BC909328 BC9093184 4 5

STANDARD STANDARD STANDARDØ 4 - 5 - 6 - 8 mm Ø 5 - 6 - 8 - 10 mm Ø 3 - 4 - 5 - 6 - 8 mm

BC909327 BC909434 BC9093195 6 6

STANDARD STANDARD STANDARDØ 4 - 5 - 6 - 8 -10 mm Ø 4 - 5 - 6 - 8 -10 - 12 mm Ø 3 - 4 - 5 - 6 - 8 - 10 mm

TiN

BW13D1mm

D2mm

L1mm €

BW1303 3,0 2,5 62BW1304 4,0 3,0 65BW1305 5,0 4,0 68BW1306 6,0 4,0 72BW1308 8,0 6,0 80BW1310 10,0 8,0 90BW1312 12,0 10,0 100BW1314 14,0 10,0 100

Ø mm R.P.M. 3 - 6 900 8 - 10 70012 - 14 600

L1

D1D2

L1

D1D2

Cons

tructi

on dr

ill bit

sPin

k

Ref. BC90B

• Fully ground carbide tip.

APPlICATIONS:• Glass, ceramic, tile, porcelain, etc...

GLASS DRILL BIT

Ref. BW13

• 4 teeth sharpening provides high performance drilling in glass.• Fully ground carbide tip.

APPlICATIONS:• Glass, ceramic, tile, porcelain, etc...

GLASS AND TILE DRILL BITS

CUTTING SPEEDR.P.M.



Professionalseries

Standardseries

28,76 32,86 34,30

35,79 49,89 44,73

5,926,476,877,278,04

11,2415,6617,52

8,078,749,289,81

10,6614,9020,7723,65

488

BW33

mmL1

mmD1mm €

BW3308 M14x2 33 8BW3310 M14x2 33 10BW3312 M14x2 33 12

L1

M14X2

SDSMax

SDSPlus

€

QFMX SDS-MAX

QFB2 AEG: PH240-PH350-PH26-PH38-PHD38BOSCH GBH7/45DE - UBH12/50

QFV2 HITACHI DH28Y - VRY38 - DH38YBMAKITA HR3820 - HR3850 - 8035NB

QFK2


Ref. BW33

CARBIDE MORTAR RAKE

CARBIDEGRIT

• To remove the mortar between the bricks before repointing Can be used on angular grinder with M14x2.00 threads

ADAPTORS WITH SLOT LOCKING DEVICE FOR FITTING HAMMER DRILL BITS WITH SDS PLUS SHANK

SDS-PlUS EXIT SDS-MAX SHANK

SHANK MACHINE TYPE (SDS-PLUS EXIT IN ALL CASES)

STRAIGHTRIBBED SHANK

PETIT KANGO 501 - 637 - 430C

13 mm Hexagonalshank

14 mm Hexagonalshank

All machines with SDS MAX shank

This mechanism was designed to use SDS PLUS Drills, till 18 mm maximum diameter, which are not available with SDS-MAX shank. The lifetime and performance of these adaptors will depend on their adequate use

HEX. 13 mm

HEX. 14 mm

Thread

139,16

139,16

139,16

139,16

18,3621,2525,25

489

Cons

tructi

on dr

ill bit

sCLAIM ACCEPTANCE

Happens when the drill is still being used even if completely worn. The heat generated can melt the brazing and loosen the carbide insert.

NON-ACCEPTABLE CLAIM

The metal fatigue has worn out the tip and, if used beyond this point, can lead to a flute breach.


Flute rupture caused by insufficient heat treatment (carbide tip is visibly not worn).

ACCEPTABLE CLAIM

Drilling over the flute length causes the dust channel to clog and the subsequent overload results in flute breach.The non-fluted part of the drill shows unusual wear when it should be clear.


Can be due to operator drilling over the useful length or possibly keeping on using a worn out drill until rupture.


Due to the tip violently impacting very hard bodies like the metal rebar of reinforced concrete.


The tip crack was caused by the hard material, then drilling continued as it is.


FLUTE RUPTURE

FLUTE RUPTURE

HEAD BREACH

Carbide tip worn out

Carbide tip worn out

Carbide tip in good condition

CARBIDETIPPED CRACK

CARBIDE TIPBREACH

lOOSECARBIDE TIP

FLUTE RUPTURE

The concrete drill bit may be damaged in the following situations:

• Continue working when the tool is worn.• When drilling in improper material.• When drilling deeper than the flute’s length.• When the drill bit is used with an improper machine.

How can I check the wear limit of drill bits?

• Check the state and wear level of the carbide tip.• Verify the state of the drill’s flutes.• The drill holder of the power tool is a good indicator of wear.

490

√ X

Construction drill bits

CLAIM ACCEPTANCE FOR DELTATOP DRILL BITS

When the tip’s ridge line of the drill bits looks like the picture,it is considered worn out (see left)


The shank part of the drill bit is considered worn out when it is burnt blue (Used with only rotation or used after the tip has worn out). The shank of the drill bit could turn blue also when drilling on extremely hard material.


If the head shows burnt blue areas, it means the operator has continued working with a worn out drill bit. The heat generated has melted the brazing and caused the carbide insert to loosen.NON-ACCEPTABLE CLAIM

However, when the tip is detached at the early stage without having the flute turning blue, this claim will be accepted. ACCEPTABLE CLAIM

USUAL LIFE OFDElTATOP BIT

lOOSE DElTATOPCARBIDE TIP

USUAL LIFE OFDElTATOP BIT

worn out

worn out

worn outaccepted

When the tip’s ridge line of the drill bits looks like the picture,it is considered worn out (see left).

When the tip’s ridge line of the drill bits looks like the picture,it is considered worn out (see left).

worn outNew worn outNew

HOW TO VERIFY THE DRILL BIT’S WEAR LEVEL ?

CLAIM ACCEPTANCE

DYSFUNCTION AT THE POWER CHUCKS SDS PLUS NOTCHES

Trapezoidal noses responsible for rotation.

Axial movement of the drill is correct. CONClUSION:This results in the drill rotating without correctly hammering which leads to excessivefriction and over-heating of the drill bit.


Steel ball, responsible for axial fixing.A worn out trapezoidal does not transmit the rotation movement correctly, thus forcing the ball to transmit rotation as well as axial movement. The ball impacts and forces against the notch, damaging the chuck.

Worn out trapezoidal nose.

Broken trapezoidal nose.

A worn out chuck does not allow a correct transmission of the axial impact movement.

DAMAGED POWER TOOL CHUCKPOWER TOOL CHUCK IN GOOD CONDITION

Extreme example

Documents

001-007 Presentacion 2020-2 · • Center drilling and cooling in glass, stoneware, hard tiles, etc. CAN FOR WATER REFRIGERATION - Capacity: 1,1L. • Other compositions on request