Upload
golak9107
View
193
Download
21
Embed Size (px)
Citation preview
ZXSDR NodeB Data Configuration
ZTE University
Content
Overview
NodeB Configuration
Ground Resource Configuration
Transmission Resource Configuration
Wireless Resource Configuration
Overview--LMT Data Configuration Mode
On-line configuration This mode is to configure the ZDB of the B8200 directly. The data configured
on the line take effect immediately. To configure on the line, modify the contents in the C:\ump file first, to set the IP address as the IP address of the debugging network interface on the CC board of the B8200. Then, run the LMT. The CC board is defaulted before delivery.
Off-line configuration This mode is to modify the configurations on the client. The configurations are
saved into the designated directory in the mode of the XML file. In the off-line configuration, the LMT is not connected to the B8200 and the operation does not affect the running of the B8200. The off-line configuration mode is used when there is no ump file under the root directory of the Disc C. One local configuration file is required for the off-line configuration.
Node B Application Part
(NBAP)
Transport Layer
Radio Network Layer
Radio Network Control Plane
Transport Network
Control Plane
DC
H F
P
RA
CH
FP
Physical Layer
DS
CH
FP
Data Link
User Plane
SCTP
IP
FA
CH
FP
PC
H F
P
US
CH
FP
CP
CH
FP
Data Link
IP
UDP
Overview--Iub Interface Protocol Stack ( IPOE)
Overview--LMT Data Configuration Flow
IP Over FE Mode Transmission Data Configuration Flow :
Prepare
Plan parameters for
RNC interconnection
NodeB Configuration
NodeB basic
attributes
Rack and
board configuration
Serial port
configuration
clock referen
ce source
Ground resource configuration
Environment monito
ring
Dry contact configuration
Topology
structure
setting
Transmission resource
configuration
Ethernet
parameter
IP param
eter
Globe port Parameter
Static route param
ete
Wireless resource configuration
RRU Common Paramet
er
Base Band
Resource Pool
RF Connec
tion
WCDMA Sector
Local Cell
End
SCTP stream parameter
SCTPparameter
OMCB parameter
IP Clock parameter
BFD param
eter
Content
LMT Data Configuration
NodeB Configuration
Ground Resource Configuration
Transmission Resource Configuration
Wireless Resource Configuration
NodeB Configuration
NodeB Basic Attributes Clock Reference Source Configuring Rack and Board
NodeB Configuration
Setting NodeB Basic Attributes :Basic Parameter and Other Relevant Parameters
NodeB Configuration
NodeB Configuration
NodeB Configuration
Configuring Rack and Board : Create RRU rack
NodeB Configuration
Configuring Rack and Board : Create board on BBU and RRU rack
NodeB Configuration
Configuring Rack and Board : Create board on BBU and RRU rack
NodeB Configuration
Configuring Clock Reference Source : Right-click and choose Configuration Management BS Configure Clock Reference Source. Configure Clock Reference Source dialog box pops up.
Content
LMT Data Configuration
NodeB Configuration
Ground Resource Configuration
Transmission Resource Configuration
Wireless Resource Configuration
Ground Resource Configuration
Environment Monitoring In-line Tower Amplifier Serial Port Topology structure AISG Device Dry Contact
Ground Resource Configuration
Configuring Environment Monitoring: click Configuration Management→ Ground Resource Management→ Environment Monitoring to open the Environment Monitoring window:
Ground Resource Configuration
Configuring Topology Structure: Click Configuration Management→ Ground Resource Management→ Topology to open the Topology window.
Ground Resource Configuration
Configuring Topology Structure:
About upper-level and lower-level in the topology configuration: The board/rack near the baseband processing unit is the upper-level The board/rack away from the baseband processing unit is lower-level.
Ground Resource Configuration
Configuring Dry Contact
Content
LMT Data Configuration
NodeB Configuration
Ground Resource Configuration
Transmission Resource Configuration
Wireless Resource Configuration
Transmission Resource Configuration
For the IP over FE transmission, the following nine items should be configured: Ethernet Parameter Global Port Parameter IP Parameter Static Route Parameter SCTP Parameter SCTP Stream Parameter IP Clock Parameter BFD Parameter OMC-B Parameter
Transmission Resource Configuration
Configuring Ethernet Parameter--Click Physical Media Configuration→ Ethernet parameter .Right-click the blank part in this pane and choose Add to open the Ethernet parameter management dialog box:
Transmission Resource Configuration
Configuring Global Port Parameter--Click Transmission Resource Management→ IP Bearing Configuration→ Global port parameter to open the Global port parameter pane. Right-click the blank part in this pane and choose Add to open the Global Port Parameter dialog box:
Transmission Resource Configuration
Configuring IP Parameter--Click Transmission Resource Management→ IP Bearing Configuration→ IP parameter to open the IP parameter pane. Right-click the blank part in this pane and choose Add to open the IP Parameter Management dialog box:
Transmission Resource Configuration
Configuring Static Route Parameter--Click Transmission Resource Management→ IP Bearing Configuration→ Static Router Parameter. Right-click the blank part in the right pane and choose Add to open the Static route configuration dialog box.
Transmission Resource Configuration
Configuring SCTP Parameter--Click Transmission Resource Management→ IP Bearing Configuration→ SCTP Parameter to open the SCTP parameter pane. Right-click the blank part in this pane and choose Add to open the SCTP parameter management dialog box:
Transmission Resource Configuration
Configuring SCTP Stream Parameter--Click Transmission Resource Management→ IP Bearing Configuration→ SCTP Stream Parameter to open the SCTP stream parameter pane. Right-click the blank part in this pane and choose Add to open the SCTP stream parameter management dialog box.
Transmission Resource Configuration
Configuring IP Clock Parameter--Click Transmission Resource Management→ IP Bearing Configuration→ IP Clock Parameter to open the IP Clock parameter pane. Right-click the blank part in this pane and choose Add to open the IP Clock parameter dialog box.
Transmission Resource Configuration
Configuring BFD Parameter--Click Transmission Resource Management→ IP Bearing Configuration→ BFD Parameter to open the BFD parameter pane. Right-click the blank part in this pane and choose Add to open the BFD parameter dialog box.
Transmission Resource Configuration
Configuring OMC-B Parameter
Content
LMT Data Configuration
NodeB Configuration
Ground Resource Configuration
Transmission Resource Configuration
Wireless Resource Configuration
Wireless Resource Configuration
RF Connection RRU Common Parameter Base Band Resource Pool WCDMA Sector Local Cell
Wireless Resource Configuration
Configuring RF Connection--Click Wireless Resource Management→ RF Connection to open the RF Connection pane. Right-click the blank part in this pane and choose Add →Rack to open the RF Connection dialog box.
Wireless Resource Configuration
Configuring RRU Common Parameter --Click Wireless Resource Management→ RRU Common Parameter to open the RRU Common Parameter pane. Right-click the blank part in this pane and choose Add to open the RRU Common Parameter dialog box.
Wireless Resource Configuration
Configuring Baseband resource pool--Click Wireless Resource Management→ Baseband Resource Pool and right-click the blank part in this pane and choose Add to open the baseband resource pool Management dialog box:
Wireless Resource Configuration
Configuring Baseband resource--Click Baseband Resource Pool→ Baseband Resource to open the Baseband Resource pane. Right-click the blank part in this pane and choose Add to open the Baseband Resource dialog box:
Wireless Resource Configuration
Configuring WCDMA Sector--Click Wireless Resource Management→ WCDMA Sector to open the WCDMA Sector pane. Right-click the blank part in this pane and choose Add to open the WCDMA Sector dialog box:
Wireless Resource Configuration
Configuring Local cell--Click Wireless Resource Management→ WCDMA Sector to open the WCDMA Sector pane. Right-click the blank part in this pane and choose Add Local Cell to open the Local Cell Management dialog box:
Wireless Resource Configuration
Configuring Local cell
Wireless Resource Configuration
Configuring Local cell