01 Main Building

7/31/2019 01 Main Building

1/115

16 CLASSROOMS BOYS SCHOOL (5 & 12) AT AL DHAHIR, WAL WASIL BILL NO. 2

MAIN BUILDING

(IN WORDS) (IN FIGURES)

BILL NO.2 - MAIN BUILDING

SUMMARY

a Sub-structure 2/9 96,690.150

b Concrete work 2/15 116,514.700

c Masonry 2/18 24,038.900

d Thermal & Moisture Protection 2/23 16,293.500

e Metal work 2/33 20,890.200

f Carpentry & Joinery 2/40 9,044.300

g Accessories 2/41 3,687.500

h Laboratory furniture 2/47 10,682.000

j Finishes 2/58 59,916.800

k Painting & Decorations 2/61 22,108.300

l Mechanical Installations 2/75 22,264.250

m HVAC Installations 2/78 25,642.000

n Electrical Installations 2/108 61,455.550

p Electro mechanical sundries 2/113 2,000.000

Total Amount for Bill No. 2 - carried to General Summary R.O. 491,228.150

BILLNO.

ITEM DESCRIPTION PAGE NO. AMOUNT ( R.O.)

2/114


2/115

BILL NO. 2

MAIN BUILDING


3/115


MAIN BUILDING

ITEM AMOUNTREF. (IN WORDS) (IN FIGURES) ( R.O. )

SUB-STRUCTURE (PROVISIONAL)

SITE WORKS

Excavation

A Site clearance including the removal of 150 mm thick top

soil, vegetation, undergrowth, bushes, hedges, trees, or

the like 554 m3 0.600 332.400

B Excavation in pits for column bases/foundations 1124 m3 2.000 2,248.000

C Excavation in trenches for foundations 313 m3 2.300 719.900

D Extra over for excavation for breaking out rock 144 m3 5.000 720.000

E Allow for earthwork supports Item 100.000 100.000

F Allow for keeping excavation free from underground,

surface or running water from whatever the source bymechanical dewatering all as specified Item 0.000

Disposal

G Load and remove surplus excavated material from site

including providing suitable tip 769 m3 0.900 692.100

4,812.400

ITEM DESCRIPTION UNIT RATE ( R.O.)QTY UNIT

To Collection R.O.

2/1


4/115


MAIN BUILDING



SUB-STRUCTURE (PROVISIONAL) (Contd.)

SITE WORKS (Cont'd.)

Filling

A Spreading and leveling the surplus soil within plot

premises 1078 m3 0.600 646.800

B Backfilling in foundations with selected excavated

material 144 m3 0.300 43.200

C Approved imported granular fill material backfilled in to

foundations 619 m3 2.600 1,609.400

D Approved imported granular fill material compacted in

150 mm layers in making up levels under floors 5485 m3 3.500 19,197.500

E 200 mm (minimum) thick well compacted hard core

filling under floors 295 m3 3.300 973.500

F 30 mm sand bed as specified 44 m3 4.800 211.200

22,681.600To Collection R.O.

2/2


5/115


MAIN BUILDING




SITE WORKS (Cont'd.)

Anti-termite treatment

A Approved anti-termite treatment to surfaces of ground or

filling applied strictly in accordance with the

manufacturer's printed instructions including trenches,backfilling, etc. as required by the manufacturer and the

provision of guarantee valid for 10 years (Measured flat

over plinth area) 1644 m2 0.400 657.600

CONCRETE WORK

Plain ordinary portland Cement concrete of grade C15

B Blinding 100 mm thick 90 m3 30.000 2,700.000

3,357.600


To Collection R.O.

2/3


6/115


MAIN BUILDING



CONCRETE WORK (Contd.)

Reinforced poured, compacted and cured sulphate

resisting cement concrete of grade C30

A Foundations 202 m3 32.000 6,464.000

B Columns 79 m3 32.000 2,528.000

C Plinth beams 92 m3 32.000 2,944.000

D Floor beds 247 m3 32.000 7,904.000

E Floor beds in assembly platform 4 m3 32.000 128.000

F Thickening to floor beds 6 m3 32.000 192.000

G External steps, ramps & toe beams 7 m3 32.000 224.000

Reinforced poured, compacted and cured sulphate

resisting cement concrete of grade C25

H Plinth protection and toe beams including finishing the

exposed surfaces smoothly with cement mortar (1:4)

while the concrete is green 38 m3 32.000 1,216.000

21,600.000


To Collection R.O.

2/4


7/115


MAIN BUILDING




REINFORCEMENT

High yield deformed bars of diameter to BS 4449, all as

specified

A 25 mm bars 8000 kg 0.280 2,240.000

B 16 mm bars 14000 kg 0.280 3,920.000

C 14 mm bars 17000 kg 0.280 4,760.000

D 12 mm bars 6000 kg 0.288 1,728.000

E 10 mm bars 1000 kg 0.288 288.000

F 8 mm bars 5000 kg 0.288 1,440.000

Steel fabric reinforcement

G Fabric ref. A-142 1662 m2 0.900 1,495.800

15,871.800


To Collection R.O.

2/5


8/115


MAIN BUILDING




FORM WORK

Form work to give 'as struck' finish

A Sides of foundations 450 m2 3.100 1,395.000

B Sides of columns 924 m2 2.700 2,494.800

C Sides of plinth beams 895 m2 3.500 3,132.500

D Sides & edges of plinth protection 175 m2 1.000 175.000

E Sides of external steps, ramp & toe beam 21 m2 2.000 42.000

7,239.300


BLOCK WORK

To Collection R.O.

2/6


9/115


MAIN BUILDING



Precast solid sulphate resisting concrete block work

(10.5 N/mm2) in cement and sand mortar (1:4)

A 200 mm thick block work 1557 m2 7.000 10,899.000

B 200 mm thick block work in steps 12 m2 7.000 84.000

C 150 mm thick block work in steps 19 m2 7.000 133.000

11,116.000


BLOCK WORK (Contd.)

To Collection R.O.

2/7


10/115


MAIN BUILDING



SUNDRIES

A 1000 gauge polythene damp proof membrane 2565 m2 0.250 641.250

B 12 mm thick non-fibrous bituminous compressible filler

board set against concrete/block work 256 m2 2.500 640.000

C 12 x 15 mm thick mastic joint sealant to edge of 12 mm

filler board 1680 m 0.900 1,512.000

D 20 mm thick non-fibrous bituminous compressible filler

board in expansion joint as specified set against

concrete/block work 33 m2 2.800 92.400

E Approved sealant 20 x 20 mm as specified to exposed

edges of expansion joint 66 m 1.800 118.800

F Prepare and apply as specified, 3 coats of approved

solvent based bituminous paint to surfaces of

concrete/block work in contact with soil 6370 m2 1.100 7,007.000

10,011.450

COLLECTION

2/1 4,812.400

To Collection R.O.

2/8


11/115


MAIN BUILDING



2/2 22,681.600

2/3 3,357.600

2/4 21,600.000

2/5 15,871.800

2/6 7,239.300

2/7 11,116.000

2/8 10,011.450

SUB-STRUCTURE (PROVISIONAL) 96,690.150

Carried to Summary of Bill No. 2

CONCRETE WORK

POURED CONCRETE

R.O.

2/9


12/115


MAIN BUILDING


ITEM DESCRIPTIONUNIT RATE ( R.O.)

QTY UNIT

Light weight concrete as specified

Aerated cellular concrete (dry density 1000 -1200

A Light weight concrete infill in sunken slabs 65 m3 25.000 1,625.000

Reinforced poured, compacted and cured ordinary

portland cement concrete of grade C30

B Columns 125 m3 32.000 4,000.000

C Floor beams 241 m3 32.000 7,712.000

D Floor slabs thickness 150 mm 364 m3 32.000 11,648.000

E Floor slabs thickness 175 mm 19 m3 32.000 608.000

F Floor slabs thickness 220 mm 64 m3 32.000 2,048.000

G Slab & beams in service space in lab 1 m3 32.000 32.000

27,673.000


POURED CONCRETE (Contd.)

Reinforced poured --- ditto --- concrete of grade C30

To Collection R.O.

2/10


13/115


14/115


MAIN BUILDING



QTY UNIT

High yield deformed bars of diameter to BS 4449, all as

specified

A 25 mm bars 28000 kg 0.280 7,840.000

B 20 mm bars 18000 kg 0.280 5,040.000

C 16 mm bars 21000 kg 0.280 5,880.000

D 14 mm bars 18000 kg 0.280 5,040.000

E 12 mm bars 38000 kg 0.288 10,944.000

F 10 mm bars 21000 kg 0.288 6,048.000

G 8 mm bars 12000 kg 0.290 3,480.000

44,272.000


FORM WORK

To Collection R.O.

2/12


15/115


MAIN BUILDING



QTY UNIT

Formwork to give as 'struck' finish

A Sides of columns 1736 m2 3.800 6,596.800

B Sides and soffit of beams 2129 m2 3.800 8,090.200

C Sides and soffit of arch lintels 252 m2 3.800 957.600

D Sides of lintels in corridor 75 m2 3.700 277.500

E Sides of lintels for openings, door & windows 332 m2 3.700 1,228.400

F Sides of cills 88 m2 2.500 220.000

G Sides of corridor railing 243 m2 2.000 486.000

H Sides of staircases railing 77 m2 3.800 292.600

J Sides of floor trench in lab 18 m2 3.800 68.400

18,217.500


FORM WORK (Contd.)

Formwork to give as 'struck' finish (Contd.)

To Collection R.O.

2/13


16/115


MAIN BUILDING



QTY UNIT

A Sides and soffit of slabs & beam in service space in lab 5 m2 6.100 30.500

B Sides and soffit of wash & drinking water trough 30 m2 2.500 75.000

C Sides of expansion joint upstands & cover slab 58 m2 1.500 87.000

D Sides of plinth in pantry equipment bases for AC units,

water tank & flag pole at roof 46 m2 1.000 46.000

E Sides & soffits of parapet walls & parapet coping 755 m2 3.800 2,869.000

Formwork to give as 'fair faced' finish

F Soffit of slabs 2823 m2 6.100 17,220.300

G Sides & soffits of staircase and steps 124 m2 4.100 508.400

20,836.200

COLLECTION

2/10 27,673.000

To Collection R.O.

2/14


17/115


MAIN BUILDING



QTY UNIT

2/11 5,516.000

2/12 44,272.000

2/13 18,217.500

2/14

20,836.200

CONCRETE WORK 116,514.700


MASONRY

BLOCK WORK

Precast concrete non-load bearing hollow block work

(7.5 N/mm2) in cement sand mortar (1:4)

R.O.

2/15


18/115


MAIN BUILDING



QTY UNIT

A 100 mm thick walls 233 m2 6.500 1,514.500

B 150 mm thick walls 24 m2 6.500 156.000

C 200 mm thick walls 2791 m2 6.500 18,141.500

Precast solid concrete block work (10.5 N/mm2) in

cement and sand mortar (1:4)

D 200 mm thick block work in courtyard wall 63 m2 7.000 441.000

CLAUSTRA BLOCK WORK

Precast concrete claustra block work set in cement sand

mortar (1:4) including neat pointing

E 100 mm thick walls 147 m2 14.800 2,175.600

22,428.600

MASONRY (Contd.)

Damp proof course, bituminised fibre felt damp proof

course set on cement mortar bed all as specified

A Horizontally to walls on and including mortar bed 117 m2 1.500 175.500

To Collection R.O.

2/16


19/115


MAIN BUILDING



QTY UNIT

SUNDRIES

B SS wall ties as specified, one end cast into concrete and

other end built into joint of block walls Item 500.000 500.000

C 20 mm thick non-fibrous bituminous compressible filler

board in expansion joint as specified set against

concrete/block work 276 m2 2.800 772.800

D Approved sealant 20 x 20 mm as specified to exposed

edges of expansion joint 90 m 1.800 162.000

1,610.300

COLLECTION

2/16 22,428.600

To Collection R.O.

2/17


20/115


MAIN BUILDING



QTY UNIT

2/17 1,610.300

MASONRY 24,038.900


THERMAL & MOISTURE PROTECTION

SCREEDS

Plain cement concrete roof screed as specified

R.O.

2/18


21/115


MAIN BUILDING

ITEM AMOUNT

REF. (IN WORDS) (IN FIGURES) ( R.O. )ITEM DESCRIPTION

UNIT RATE ( R.O.)QTY UNIT

A 50 mm (average) thick laid to falls including finishing top

surfaces smooth to receive water proof membrane over

roof 1437 m2 1.100 1,580.700

B Cement and sand (1:3) triangular fillet 50 x 50 mm laid

to perimeter of roof slab and all abutments of roof 500 m 0.800 400.000

COVERINGS AND LININGS

Waterproofing felt 4 mm thick atactic polypropylenemembrane bituminous torch-on water proofing system to

suit hot climates; applied strictly in accordance with

manufacturers printed instructions including all

necessary additional strips at angles, intersections, etc.,

complete with mastic pointing all as specified

(Contractor to allow for 10 years guarantee and 24 hour

C Covering laid on screed including priming on roofs 1437 m2 1.800 2,586.600

4,567.300

THERMAL & MOISTURE PROTECTION (Contd.)

COVERINGS AND LININGS (Contd.)

To Collection R.O.

2/19


22/115


MAIN BUILDING

ITEM AMOUNT



Waterproofing felt 4 mm thick atactic polypropylene

membrane bituminous torch-on water proofing system to

suit hot climates---ditto---all as specified (Contractor to

allow for 10 years guarantee and 24 hour flood test)

A Skirting 300 mm girth including turning into chase 500 m 0.550 275.000

B Allow for dressing roofing system all round PVC

rainwater roof outlets/gargoyles 18 No 0.900 16.200

C Allow for dressing roofing system all round services

pipes/ducts etc. Item

Geotextile membrane

D Geotextile synthetic fiber separation mesh laid on

insulation board as specified (110 g/m2) 1437 m2 0.900 1,293.300

1,584.500


Expanded Polystyrene rigid foam insulation board of

density 30 kg/m3, all as specified

To Collection R.O.

2/20


23/115


MAIN BUILDING

ITEM AMOUNT



A 50 mm thick laid loose 1437 m2 1.400 2,011.800

ROOF TILES

Precast terrazzo tiling on roofs over and including 40

mm thick cement sand mortar bed (1:4) & pointing as

specified

B 300 x 300 x 30 mm thick terrazzo tiling to roof 1437 m2 4.700 6,753.900

C 300 x 150 x 20 mm thick terrazzo skirting to roof 500 m 2.000 1,000.000

9,765.700


WATERPROOFING TO WET AREAS

To Collection R.O.

2/21


24/115


MAIN BUILDING

ITEM AMOUNT



Approved waterproofing treatment to wet areas as per

manufacturers specification including all preparatory

works, providing cement sand mortar angle fillets etc

complete all as specified & shown on the drawings

(Work to be carried out by specialist agency)

A Toilet floors, cooler area, tank area at roof, laid

horizontally 94 m2 2.000 188.000

B Ditto, to 650/150 mm high band vertically 48 m2 1.500 72.000

C Sides & bases of floor trench & storage space in lab to

receive epoxy painting 36 m2 2.000 72.000

D Sides & bases of wash trough in water cooler area &

toilets to receive tiles 22 m2 2.000 44.000

376.000

COLLECTION

2/19 4,567.300

To Collection R.O.

2/22


25/115


MAIN BUILDING

ITEM AMOUNT



2/20 1,584.500

2/21 9,765.700

2/22 376.000

THERMAL & MOISTURE PROTECTION 16,293.500


METAL WORK

BALUSTRADES & RAILINGS

R.O.

2/23


26/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Supply and install in position composite epoxy coated

MS railings as detailed on drawing no. AR-12 & AR-15,

including all welding, shoe caps, all required fixings,

fasteners, 70 x 70 mm meranti wood hand rail, final

decorations and any other incidental works as required

to the approval of the Engineer

A 250 mm high MS balustrade fixed to concrete railings of

staircase 38 m 20.500 779.000

B 750 mm high MS balustrade fixed to ramp beds 9 m 35.000 315.000

FLAGPOLE

Proprietary white polyester powder coated tapered flag

pole; single sheaved heavy duty truchead with internal

hayward and cleat via lockable door demounted hinge

type, base plate 400 x 400 x 20 mm with anchor bolts,

nuts etc complete erected on & including concrete

pedestal all as shown on the drawings and to the

a roval of the en ineer

C 10 M high flag post with 175 mm external diameter at

base and 76 mm diameter at head. 1 No 435.000 435.000

D 8 M high flag post with 175 mm external diameter at

base and 76 mm diameter at head. 1 No 346.000 346.000

1,875.000

METAL WORK (Contd.)

TRENCH COVER

To Collection R.O.

2/24


27/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Supply and install in position acid proof epoxy coated 9

mm thick MS chequered plate covers with 40 x 40 x 4

mm nosing angle all as detailed on drawing no. AR-16,

including all welding, hold fasts, all required fixings,

fasteners, approved epoxy painting, final decorations

and any other incidental works as required to the

approval of the Engineer

A Cover to floor trench of width 500 mm, in lab 26 m 50.000 1,300.000

B Cover to floor trench of width 400 mm, in lab 4 m 40.000 160.000

TRENCH IN ELECTRICAL ROOM

C Concrete trench including excavation, backfilling, carting

away, concrete work, formwork, finishing etc and with 6

mm thick 840 mm wide chequered M.S. plate cover with

25 x 25 x 5mm angle stiffener over 50 mm x 50 mm x 6

mm M.S. angles for electrical room trenches all

complete with painting and lifting keys 4 m 65.000 260.000

To Collection R.O. 1,720.000

METAL WORK (Contd.)

ALUMINIUM WINDOWS

2/25


28/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Note: Sizes stated are structural opening sizes.

Approved silver anodised aluminium

fixed/sliding/openable clear glass window sets, complete

with hermetically sealed double glazing units, including

hardwood grounds, sub-frames, weather bars, fly

screens all necessary ironmongery as specified, fixed to

block work or concrete, sealant pointing all around, all inaccordance with the specification and as shown on

drawing no. AR-17

A Window type W1, overall size 900 x 1200 mm high 204 No. 33.000 6,732.000

B Window type W1, overall size 900 x 1200 mm high 2 No. 33.000 66.000

C Window type W2, overall size 600 x 1200 mm high 26 No. 21.000 546.000

D Window type W3, overall size 500 x 1200 mm high 4 No. 30.000 120.000

E Window type W4, overall size 2400 x 1200 mm high 1 No. 81.000 81.000


METAL WORK (Contd.)

ALUMINIUM WINDOWS (Contd.)

2/26


29/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Approved silver anodised aluminium

fixed/sliding/openable clear glass window sets---ditto---

all in accordance with the specification and as shown on

drawing no. AR-17

A Window type W5, overall size 1800 x 1000 mm high 2 No. 50.000 100.000

B Window type V2, overall size 350 x 450 mm high withaluminium glass louvers & provision for fixing 1 no.

exhaust fan 30 No. 18.000 540.000

To Collection R.O. 640.000

METAL WORK (Contd.)

ALUMINIUM DOORS

2/27


30/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT


Approved silver anodised aluminium door sets,

complete with hermetically sealed double glazing units,

including hardwood grounds, sub-frames, weather bars,

fly screens all necessary ironmongery with locking

arrangement as specified, fixed to block work or

concrete, sealant pointing all around, all in accordance

with the specification and shown on drawing no. AR-17

A Double shutter door type D1, with overall size 2100 x

2400 mm high 3 No. 348.000 1,044.000

B Single shutter sliding door type D15, with overall size

1000 x 2200 mm high 1 No. 160.000 160.000

C Single shutter sliding door type D17, with overall size

1000 x 2200 mm high 4 No. 160.000 640.000

D Double shutter louver door type D4, overall size 1400 x

2200 mm high for Water cooler & plant room 2 No. 139.000 278.000

E Double shutter louver door type D11, overall size 1500 x

1200 mm high for LPG enclosure 1 No. 81.000 81.000


METAL WORK (Contd.)

MS GRILL DOOR

2/28


31/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Supply and install in position epoxy coated MS grill door

made out of structural hollow sections with hollow

section in frame all as detailed on drawing no. AR-17,

including all welding, hold fasts, all required fixings,

fasteners, approved epoxy painting, final decorations

and any other incidental works as required to the

approval of the Engineer

A Double shutter door type MG1, with overall size 2200 x

2350 mm high 2 No. 225.000 450.000

B Double shutter door type MG2, with overall size 2000 x

2350 mm high 2 No. 195.000 390.000

C Single shutter door type MG5, with overall size 900 x

2350 mm high with claustra design 2 No. 200.000 400.000

D Single shutter door type MG6, with overall size 1500 x

2200 mm high with claustra design 2 No. 320.000 640.000


METAL WORK (Contd.)

STEEL DOOR

2/29


32/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT


Approved proprietary make galvanised & powder coated

insulated steel door shutter sets 44 mm thick complete

with, supply & fixing specified ironmongery and including

weather bars, mastic pointing all around and fixed as

per manufacturer instructions etc., all in accordance with

the specification and as detailed in drawing. ref. AR-17

A Single shutter door type MG3, with overall size 1200 x

2200 mm high 3 No. 360.000 1,080.000


METAL WORK (Contd.)

SECURITY GRILLS

2/30


33/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Supply and install in position epoxy coated MS security

grill including welding, fixtures, anchors, all required

fixings and any other incidental works as required to the

approval of the Engineer and as indicated on the

drawing no. AR-15

A For window type W1, overall size 900 x 1200 mm high 174 No. 16.000 2,784.000

B For window type W1, overall size 900 x 1200 mm high 2 No. 16.000 32.000

C For window type W2, overall size 600 x 1200 mm high 26 No. 14.000 364.000

D For window type W3, overall size 500 x 1200 mm high 4 No. 13.800 55.200

E For window type W4, overall size 2400 x 1200 mm high 1 No. 50.000 50.000

F For window type W5, overall size 1800 x 1000 mm high 2 No. 37.500 75.000

G For window type V2, overall size 350 x 450 mm high 30 No. 3.700 111.000


METAL WORK (Contd.)

COMPOSITE UNITS

2/31


34/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

PANTRY BASE UNITS

Pantry base units with 20 mm thick marble work top &

80 mm high splash back including cabinets made out of

solid meranti wood in carcasing, pre-laminated/veneered

block board boards in shelves & dividers, 15 mm thick

PVC coated metal sheet in shutters, drawers & end

panels, all accessories, supply & fixing required

ironmongery complete and with provision for pantry sink(sink measured separately), including fixing to floor/wall,

finishings, polishing & final decorations all as specified

and shown on the drawing no. AR-13

A Base unit with overall stretched length of 2800 mm x

650 mm wide x 900 mm high including forming cut-out

to receive 1 No. sink (sink measured separately) 2 No. 238.000 476.000

476.000

COLLECTION

To Collection R.O.

2/32


35/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

2/24 1,875.000

2/25 1,720.000

2/26 7,545.000

2/27 640.000

2/28 2,203.000

2/29 1,880.000

2/30 1,080.000

2/31 3,471.200

2/32 476.000

METAL WORK 20,890.200


Note:

R.O.

2/33


36/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

1) All timber and veneers shall be well conditioned,

seasoned, dried and vacuum treated all as specified

2) All hardwood timber shall be best quality

3) Sizes stated are structural opening sizes

4) Fire doors are to include intumescent strips, smoke

seals and plugs etc., all as specified

5) All fire rated doors should comply with specification

and ROP regulations

DOORS

Meranti wood solid core flush door shutters 44 mm thick

comprising 50 mm thick MW frames, architraves, plinth

blocks, sub-frames, heads, jambs, trims, beadings, door

stops, mouldings, meranti wood lipping to all edges with

mastic and other pointing, weather strips and all ancillary

items including polishing, painting, final decoration for a

complete installation as specified and detailed on Drg.

No. AR-17

A Single leaf door type D2, overall size 1000 x 2200 mm

high with 200 x 600 mm vision panel 20 No. 80.000 1,600.000


CARPENTRY AND JOINERY (Contd.)

DOORS (Contd.)

2/34


37/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Meranti wood solid core flush door shutters---ditto---


No. AR-17

A Single leaf door type D2A, overall size 1000 x 2200 mm

high 12 No. 80.000 960.000

B Double leaf door type D3, overall size 1400 x 2200 mm

high with 200 x 600 mm vision panel 1 No. 150.000 150.000

C Single leaf door type D6, overall size 1000 x 2200 mm

high with kick plate on both side and pre-laminated

facing on inside 7 No. 80.000 560.000

D Single leaf door type D8, overall size 900 x 2200 mm

high with aluminium pre-laminated on outside 6 No. 70.000 420.000



DOORS (Contd.)

2/35


38/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Meranti wood semi solid core flush door shutters 44 mm

thick comprising 50 mm thick MW frames, architraves,

plinth blocks, sub-frames, heads, jambs, trims,

beadings, door stops, mouldings, meranti wood lipping

to all edges with mastic and other pointing, weather

strips and all ancillary items including polishing, painting,

final decoration for a complete installation as specified

and detailed on Drg. No. AR-17

A Single leaf door type D7, overall size 800 x 2000 mm

high with kick plate on both side and pre-laminated on

both side 24 No. 70.000 1,680.000

B Single leaf door type D7A, overall size 800 x 2000 mm

high with kick plate on both side and pre-laminated on

inside 1 No. 70.000 70.000



DOORS (Contd.)

2/36


39/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Meranti wood solid core flush door shutters 54 mm thick

comprising 50 mm thick MW frames, architraves, plinth

blocks, sub-frames, heads, jambs, trims, beadings, door

stops, mouldings, meranti wood lipping to all edges with

mastic and other pointing, weather strips and all ancillary

items including polishing, painting, final decoration for a


No. AR-17

A Double leaf door type D5, overall size 1200 x 2200 mmhigh with 400 x 200 mm aluminium louver panel with fly

screen (1 hour fire retardant ) 2 No. 210.000 420.000

B Single leaf door type D12, overall size 1000 x 2200 mm

high with 180 swing (1 hour fire retardant ) 1 No. 164.000 164.000

C Double leaf door type D13, overall size 1400 x 2200 mm

high with 180 swing (1 hour fire retardant ) 1 No. 240.000 240.000

D Single leaf door type D14, overall size 1000 x 2200 mm

high (1 hour fire retardant ) 3 No. 164.000 492.000

E Single leaf door type D16, overall size 800 x 1050 mm

high (1 hour fire retardant ) 2 No. 65.000 130.000



IRONMONGERY

2/37


40/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Supply & fix following ironmongery sets to doors and

frames with accessories & screws to match, all as

specified

A Set for door type, D1 3 Set

B Set for door type, D2 20 Set

C Set for door type, D2A12 Set

D Set for door type, D3 1 Set

E Set for door type, D4 2 Set

F Set for door type, D5 2 Set

G Set for door type, D6 7 Set

H Set for door type, D724 Set



IRONMONGERY (Contd.)

2/38


41/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Supply & fix following ironmongery sets to doors and

frames with accessories & screws to match, all as

specified

A Set for door type, D7A 1 Set

B Set for door type, D8 6 Set

C Set for door type, D121 Set

D Set for door type, D13 1 Set

E Set for door type, D14 3 Set

F Set for door type, D16 2 Set

G Allow for Grand master key & sub-master key system Item


COLLECTION

2/39


42/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

2/34 1,600.000

2/35 2,090.000

2/36 1,750.000

2/37 1,446.000

2/38 1,065.000

2/39 1,093.300

CARPENTRY AND JOINERY 9,044.300


ACCESSORIES

R.O.

2/40


43/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Supply and install the following accessories including

fixing in position as per the manufacturers instructions

all as specified and as detailed on drawing no. AR-15

Notice board

A Size 2000 mm x 1000 mm 2 No. 185.000 370.000

Pin board

B Size 9200 mm x 1200 mm 3 No. 71.500 214.500

C Size 7000 mm x 1200 mm 20 No. 58.500 1,170.000

D Size 4000 mm x 1200 mm 5 No. 35.000 175.000

E Size 1500 mm x 1200 mm 1 No. 15.000 15.000

Pen board including pen shelf

F Size 4000 mm x 1200 mm 21 No. 83.000 1,743.000

ACCESSORIES 3,687.500


LABORATORY FURNITURE

R.O.

2/41


44/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Approved proprietary make laboratory furniture sets

comprising all accessories as required including work

tops, upholstery, end panels, dividers, shelves, shores,

supports, under bench cabinets, cup-boards, drawers,

modesty panels, provision for sink, supply & fixing sink

units with all accessories, supply & fixing ironmongery

with locking arrangement on and including fixing to

floor/wall, complete installation all as specified and

shown on drawings

Laboratory

A Teachers platform, size 3000 x 2000 x 150 mm high 1 No

B Teachers bench, size 2550 x 750 x 900 mm high 1 No 0.000

C Teachers chair with adjustable height 1 No 0.000

D Students bench, size 1500 x 1500 x 900 mm high6 No 0.000

E Students stool with adjustable height 37 No 0.000


LABORATORY FURNITURE (Contd.)

2/42


45/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Approved proprietary make laboratory furniture sets---

ditto---complete installation all as specified and shown

on drawings

Laboratory (Contd.)

A Fume cup-board, size 1240 x 900 x 2400 mm high 1 No 0.000

B Bunsen Burners, matching tripod stands and wires

gauze with ceramic center 15 No 0.000

C Laptop computer 1 No 0.000

D Post Eye wash bottle set 1 No 0.000

E First aid set 1 No 0.000

F Projection screen, size 1750 x 1750 mm wall mounted

type of Brilliant type grain surface 1 No 0.000

G Fire extinguishers, dry type (AFFF) 4.5 Kg 2 No 0.000

H Fire extinguishers, CO2 type 4.5 Kg 2 No 0.000

J Fire blankets with wall case 2 No 0.000



2/43


46/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT



on drawings

Preparation room

A Wall bench unit with wall cupboard, size 4500 x 750 x

900 mm high 1 No 0.000

B Storage cup-board with two leave doors, size 900 x 450

x 2170 mm high 4 No 0.000

C Mini tower computer 1 No 0.000

D Bunsen Burners, matching tripod stands and wires

gauze with ceramic center 2 No 0.000

E Teachers stool with adjustable height 2 No 0.000

F Fire extinguishers, dry type (AFFF) 4.5 Kg 1 No 0.000

G Fire extinguishers, CO2 type 4.5 Kg 1 No 0.000

H Fire blankets with wall case 1 No 0.000



2/44


47/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT



on drawings

Lab office

A Office table, size 1800 x 700 x 750 mm high 1 No 0.000

B Teachers chair with adjustable height 2 No 0.000

C Storage cup-board with glazed sliding doors, size 900 x

450 x 2250 mm high 4 No 0.000

D File rack, size 1800 x 450 x 900 mm high 1 No 0.000



2/45


48/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT



on drawings

Chemical storage

A Acid base unit, size 600 x 580 x 2000 mm high 1 No 0.000

B Refrigerator, capacity 160L (595 x 600 x 1550 mm high) 1 No 0.000

C Storage cup-board with glazed sliding doors, size 900 x

450 x 2250 mm high 4 No 0.000

D Venetian blinds to all windows in laboratory, preparation

room, chemical storage and lab office with rails Item 0.000


LABORATORY FURNITURE

2/46


49/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

COLLECTION

2/42 3,091.000

2/43 3,091.000

2/44 1,500.000

2/45 1,000.000

2/46 2,000.000

LABORATORY FURNITURE 10,682.000


FINISHES

INSITU FINISHES

R.O.

2/47


50/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Cement, sand (1:4) screed; internally

A 65 mm screed to receive porcelain/ceramic floor tiles 1118 m2 1.500 1,677.000

B 45 mm screed to receive terrazzo treads & risers in 120 m2 1.100 132.000

C 45 mm screed to receive terrazzo floor tiles 1669 m2 1.100 1,835.900

Cement concrete screed of grade C30; internally

D 75 mm thick Cement concrete screed finished smooth in

floors of LPG enclosure & Air wells 40 m2 1.500 60.000

E Ditto to receive raised access floor 15 m2 1.500 22.500

3,727.400

FINISHES (Contd.)

INSITU FINISHES (Contd.)

To Collection R.O.

2/48


51/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Cement, sand rendering on block work or concrete with

spatter dash coat, base coat and finishing coat (1:4)

steel trowel finish including approved bonding agent to

concrete surfaces all necessary GI expanded metal lath

reinforcing strips at junctions of concrete and block

work, GI angle beads/stop beads, expansion joints etc.,

as required, all in accordance with the specification;

internally

A 20 mm (average) two coat render to walls finishedsmooth to receive paint finish 5548 m2 1.900 10,541.200

B Ditto, to walls above wall dado in toilets & kitchens,

finished smooth to receive paint finish 279 m2 1.900 530.100

C Ditto, to walls, wood float finish to receive wall tiles 540 m2 1.900 1,026.000

D Ditto, to walls, wood float finish to receive

porcelain/ceramic skirting 56 m2 1.900 106.400

E Ditto, to walls, wood float finish to receive terrazzo

skirting 116 m2 1.900 220.400

12,424.100

FINISHES (Contd.)

INSITU FINISHES (Contd.)

To Collection R.O.

2/49


52/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Cement, sand rendering on block work or concrete

comprising spatter dash coat, base coat and finishing

coat (1:3) steel trowel finish including approved bonding

agent to concrete surfaces all necessary SS expanded

metal lath reinforcing strips at junctions of concrete and

block work, PVC angle beads/stop beads, expansion

joints etc., as required, all in accordance with the

specification; externally

Note:Rates are to include forming grooves, recess panels,

working on projections and the like unless otherwise not

specifically measured

A 20 mm (average) two coat render to walls finished

smooth to receive paint finish 3706 m2 2.400 8,894.400

B Ditto, to courtyard walls 128 m2 2.400 307.200

9,201.600

FINISHES (Contd.)

TILE, SLAB AND BLOCK FINISHES

To Collection R.O.

2/50


53/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Precast terrazzo tiles bedded and jointed in neat cement

grout on screeded bed (measured separately) and

pointed in white or coloured cement including grinding,

polishing and sealing all in accordance with the

specification and as shown on drawings

Floors

A 300 x 300 x 30 mm thick approved terrazzo tiles in floors 1643 m2 4.100 6,736.300

B 300 x 300 x 30 mm thick approved chequered finish

terrazzo tiles with corborundum filled grooves in ramps 44 m2 20.600 906.400

Skirting

C Terrazzo skirting 300 x 100 mm high with bevelled top

edge 1063 m 2.100 2,232.300

D Terrazzo tile step side profiled skirting with bevelled topedge 63 m 2.100 132.300

10,007.300

FINISHES (Contd.)

TILE, SLAB AND BLOCK FINISHES (Contd.)

To Collection R.O.

2/51


54/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Precast terrazzo tiles ---- ditto ----- all in accordance with

the specification and as shown on drawings

Treads & Risers

A 340 mm wide x 30 mm thick full width terrazzo tread with

performed bull nosed edge including 2 Nos non-slip

corborundum filled grooves & 190 high x 20 mm thick

full width terrazzo riser 15 m 21.000 315.000

B 240 mm wide x 30 mm thick full width terrazzo tread ---

ditto --- & 220 high x 20 mm thick full width terrazzo riser 74 m 19.500 1,443.000

C 340 mm wide x 30 mm thick full width terrazzo tread ---

ditto --- & 120 high x 20 mm thick full width terrazzo riser 43 m 18.000 774.000

D 220 mm wide x 30 mm thick full width terrazzo tread ---

ditto --- & 120 high x 20 mm thick full width terrazzo riser 4 m 14.600 58.400

E 340 mm wide x 30 mm thick full width terrazzo tread ---

ditto --- & 135 high x 20 mm thick full width terrazzo riser 131 m 18.900 2,475.900

5,066.300

FINISHES (Contd.)


To Collection R.O.

2/52


55/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Supply & fixing fully vitrified porcelain ceramic floor tiles

laid on cement sand screed (measured separately) and

jointed and pointed in approved tile grout; all in

accordance with the specification and as shown on

drawings

Floors

A 500 x 500 x 10 mm thick approved colour, pattern tiling

to floors 820 m2 5.600 4,592.000

Skirting

B Porcelain coved skirting 500 x 100 x 10 mm with profiled

top edge 409 m 1.500 613.500

5,205.500

FINISHES (Contd.)


To Collection R.O.

2/53


56/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Supply & fixing vitrified non skid porcelain ceramic floor

tiles laid on cement sand screed (measured separately)

and jointed and pointed in approved tile grout; all in

accordance with the specification and as shown on

drawings

Floors

A 240 mm wide x 10 mm thick edge tiles with anti slip

grooves to floors 161 m2 4.700 756.700

Skirting

B Porcelain tile riser 140 mm high x 10 mm thick 153 m 3.300 504.900

1,261.600

FINISHES (Contd.)


To Collection R.O.

2/54


57/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Supply & fixing non slip ceramic floor tiles laid on

cement sand screed (measured separately) and jointed

and pointed in approved tile grout; all in accordance with

the specification and as shown on drawings

A 200 x 200 x 8 mm thick tiles in floors 137 m2 5.400 739.800

Glazed ceramic wall tiles fixed over and including

approved waterproof tile mortar backing, grouted, jointed

and pointed with approved tile grout, including cornertiles, nosings, rounded edge tiles etc all in accordance

with the specification and as shown on drawings

B 200 x 200 x 8 mm tiles to walls including rounded edge,

corner tiles as specified 500 m2 7.600 3,800.000

C Ditto, to wash & drinking water trough 32 m2 7.600 243.200


FINISHES (Contd.)


2/55


58/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Supply & install raised access flooring comprising heavy

duty adjustable galvanised steel pedestal with 38.5 mm

thick calcium sulphate fiber reinforced panel and

ventilated panel including 2 mm thick heavy duty PVC

antistatic flooring all fixed as per manufacturers

recommendation; internally

A Raised access floors in server room 15 m2 7.700 115.500

SUNDRIES

B 12 mm thick flame resistant and dielectric insulation

rubber mat laid loosely 12 m2 5.400 66.500

C Supply & providing 3 mm thick, 50 mm wide brass strips

at the junction of two different flooring material and floor

drops Item 66.500 66.500

D Proprietary type expansion joint with brass side profiles

and a thermoplastic flexible insert of the color matching

to the floor and wall finishes for expansion joints Item 50.000 50.000


FINISHES (Contd.)

PAVING IN COURTYARD

2/56


59/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Kerbs

Kerbs bedded on and including concrete foundation and

haunching as required including all weep holes,

excavation and backfill

A Edge kerb laid straight, size 100 x 250 mm 95 m 4.900 465.500

Paving

B 60 mm thick interlocking paving tiles laid on andincluding 50 mm thick sand bed 1199 m2 4.000 4,796.000

C Hydraulically pressed precast cement concrete paving

tile 500 x 500 x 50 mm thick in approved beige colour

laid on and including 50 mm thick sand bed 536 m2 5.000 2,680.000


COLLECTION

2/48 3,727.400

2/57


60/115


MAIN BUILDING

ITEM AMOUNT



2/49 12,424.100

2/50 9,201.600

2/51 10,007.300

2/52 5,066.300

2/53 5,205.500

2/54 1,261.600

2/55 4,783.000

2/56 298.500

2/57 7,941.500

FINISHES 59,916.800


PAINTING AND DECORATIONS

PAINTING

R.O.

2/58


61/115


MAIN BUILDING

ITEM AMOUNT



Prepare and apply one coat of primer, two coats of

stucco putty and finishing with 3 coats of approved

quality egg shell enamel paint finish possessing crack

tolerance formula all as specified and complete system

applied as per manufacturer's specification; internally

A Rendered walls 5548 m2 1.700 9,431.600

B Rendered walls above wall tiling in toilets & pantry 279 m2 1.700 474.300

Prepare and apply sealer, primer, putty, undercoat and

finishing coats with light textured pigmented matt finish

paint system with stain resistant all as specified and

complete system applied as per manufacturer's

specification; internally

C Fair faced soffits 2872 m2 1.700 4,882.400

14,788.300

PAINTING AND DECORATIONS (Contd.)

PAINTING (Contd.)

To Collection R.O.

2/59


62/115


MAIN BUILDING

ITEM AMOUNT



Prepare and apply one coat of alkali resistant primer,

stucco putty and finishing with two coats of weatherproof

acrylic medium textured external quality paint all as

specified; externally

A Rendered walls 3532 m2 2.000 7,064.000

B Rendered walls in courtyard 128 m2 2.000 256.000

C Extra over for finishing works & decoration in bands,projections, recess, niches etc complete all as shown on

elevation drawings Item

7,320.000

COLLECTION

To Collection R.O.

2/60


63/115


MAIN BUILDING

ITEM AMOUNT



2/59 14,788.300

2/60 7,320.000

PAINTING AND DECORATIONS 22,108.300


MECHANICAL INSTALLATIONS

Plumbing

R.O.

2/61


64/115


MAIN BUILDING

ITEM AMOUNT



All piping and equipment measured in this section to be

in accordance with the relevant specification sections

including required insulations and as indicated on

drawings

Hot and Cold Water Supply Pipe work

Supply and install pre-insulated copper pipe work to BS

2871 concealed internally, inclusive of all inter-

connections, branch offs, fittings concealed in walls,

floors and ceiling as specified

A 15 mm 92 m 3.600 331.200

B 22 mm 26 m 5.000 130.000

C 28 mm 63 m 6.150 387.450

D 35 mm 134 m 11.200 1,500.800

E 42 mm 236 m 16.100 3,799.600

F 54 mm 150 m 21.000 3,150.000

G 100 mm 9 m 39.800 358.200


MECHANICAL INSTALLATIONS (Contd.)

Hot and Cold Water Supply Pipe work (Contd.)

2/62


65/115


MAIN BUILDING

ITEM AMOUNT



Fibreglass section insulation to cold water pipes

exposed on roof, diameter

A 28 mm 45 m 1.300 58.500

B 35 mm 116 m 1.400 162.400

C 42 mm 166 m 1.700 282.200

D 54 mm 150 m 2.100 315.000

E 100 mm 9 m 4.000 36.000

Insulation

Two layers of anti-corrosive tape to pipes, diameter

F 15 mm 92 m 0.300 27.600




2/63


66/115


MAIN BUILDING

ITEM AMOUNT



Ancillaries

Bronze wedge type gate valves to BS 5154 PN10,

diameter

A 22 mm 3 No 4.000 12.000

B 28 mm 16 No 8.000 128.000

C 35 mm 3 No 12.000 36.000

D 42 mm 20 No 24.000 480.000

E 54 mm 13 No 32.000 416.000




2/64


67/115


MAIN BUILDING

ITEM AMOUNT



Science Lab

Supply and install epoxy coated fresh water line

inclusive of all inter-connections, branch offs, fittings laid

in floor trench or concealed in walls, floors and ceiling as

specified

A 50 mm dia 38 m 9.800 372.400

Ancillaries

B 18 mm dia valve for fresh water pick up point 10 No 10.500 105.000

C 50 mm dia valve 1 No 20.000 20.000

Builder's work

D Valve chamber internal dimension 400 x 400 x 500 mm

deep comprising 200 mm sulphate resisting reinforced

concrete block work, 75 mm thick concrete blinding,

mass concrete base and reinforced concrete cover slabs

complete with 400 x 400 mm Cast iron heavy duty cover

and frame including all necessary formwork, excavation,

backfilling and disposal, reinforcement, cast iron, step

iron and waterproofing as indicated in the drawing no.

ME-01 1 No 64.100 64.100



LPG Installations

2/65


68/115


MAIN BUILDING

ITEM AMOUNT



Supply and install seamless M.S. pipes grade SCH 40

with acid proof coating including all fittings and valves,

manifolds, regulators, rotary valve etc. all as specified

and as detailed on the drawing no.ME-01

A 18 mm dia 42 m 0.000

Ancillaries

B Gas manifold fabricated out of seamless M.S. pipesgrade SCH 40 with acid proof coating, butt welding joints

with necessary isolation valves, inter locking

arrangement, pressure regulator, gas leakage detector,

emergency shut off valve and pressure indicator to

connect four cylinders of capacity 50 lbs (2 nos on duty

and 2 Nos on standby) all as specified and as detailed

on the drawing no.ME-01 1 Set 0.000

C Seamless teflon rotary ball type isolation valve, 18 mm

dia 2 No 0.000

D Seamless teflon rotary ball type gas pick up point, 12

mm dia 10 No 0.000



2/66


69/115


MAIN BUILDING

ITEM AMOUNT



Equipment in accordance with the specification schedule

complete with all associated accessories including all

necessary fittings and fixings as specified

A 200 litre capacity water cooler with cooling capacity 290

litre complete in stainless steel body with taps including

water supply and drainage connections 4 Set 280.000 1,120.000

B Supply and install Islamic pattern double skin insulated

polyethylene water tank of capacity 1000 USG, anti-fungal type including connection from water main, inter-

connection, distribution connection, float valves &

valves, vent pipes, overflow, drain outlet etc: complete

as specified and as directed 4 Set 140.000 560.000



2/67


70/115


MAIN BUILDING

ITEM AMOUNT



Sanitary Fittings/Fixtures

Supply and install sanitary fittings including accessories

of approved manufacture in approved colour and shade

as specified & detailed on the drawing no. AR-13

A Asian water closet 600mm x 600mm with integral foot

plate and anti-splash rim, 9 litre capacity mid level

ceramic cistern with complete fittings, flush pipe, CPangle valve, CP flexible inlet connections etc: 19 Set 52.000 988.000

B 15 mm dia CP bib tap fitted with telephonic CP flexible

hose and spray head 19 Set 14.400 273.600

C European water closet 710mm x 400mm x 405mm with

9 litre capacity low level cistern with complete fittings,

flush pipe, CP angle valve, CP flexible inlet connections

including all accessories 6 Set 59.000 354.000

D Ablution Faucet with integrated back flow preventer

consisting of Hands spray, hose, wall hook & angle 6 Set 22.000 132.000



Sanitary Fittings/Fixtures (Contd.)

2/68


71/115


MAIN BUILDING

ITEM AMOUNT






A Wash basin pedestal mounted supplied with floor

standing pedestal, CP basin mixer, CP bottle trap, pair

of angle valves & pair of CP riser pipes 6 Set 30.000 180.000

B Liquid soap dispenser wall mounted type with stainless

steel body & CP push button 13 No 12.000 156.000

C Semi recessed vitreous china soap tray 1 No 18.000 18.000

D Semi recessed vitreous china toilet roll holder 6 No 16.000 96.000

E Robe hook, satin anodised aluminium 25 No 7.000 175.000

F CP Towel rail 600 mm long 3 No 22.000 66.000

G Stainless steel pantry sink single bowl & single drain

board with sink mixer, CP bottle trap, pair of CP angle

valves & pair of CP riser pipes 2 Set 70.500 141.000



Sanitary Fittings/Fixtures (Contd.)

2/69


72/115


MAIN BUILDING

ITEM AMOUNT






A Toilet set for the disabled toilet comprising EWC, flush

tank, wash basin, mirror, nylon coated strip resistant

grab rail, monkey catch, light touch single lever spray

mixer tap, multifunctional backrest/support bar, lift upsupport arms, etc: including all accessories complete as

specified 1 Set 450.000 450.000

B 15 mm dia CP bib tap in wash & drinking water trough 34 No 10.000 340.000

Mirrors

Copper backed glass Belgium mirrors with 5.5 mm thick

plate, with 6 mm thick marine ply backing and polished

bevelled edges fixed with CP screws and washers allcomplete

C Size 600 x 600 mm 6 No 10.000 60.000



Sanitary Installations

2/70


73/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Soil, vent and waste pipe work

uPVC pipes and fittings to BS 4514 laid in floor

screed/wall chases with all support, insulation, all

accessories like cleanout, rodding access etc: complete

all as specified and as directed

A 42 mm 24 m 0.900 21.600

B 50 mm 32 m 1.000 32.000

C 82 mm laid below f loor slab/wall chase 117 m 1.400 163.800

D 110 mm below floor slab/wall chase 168 m 1.600 268.800

uPVC pipes and fittings to BS 4514, diameter

E 82 mm vent cowl with weatherproof skirt 7 No 5.000 35.000

F 110 mm vent cowl with weatherproof skirt 17 No 6.400 108.800

G Floor trap with grated cover type, FT 24 No 12.000 288.000



Sanitary Installations (Contd.)

2/71


74/115


MAIN BUILDING

ITEM AMOUNT



Acid Resistant Pipe

Laboratory pipe work corrosion resistant black

polypropylene pipe work to BS 4991 with all accessories

like clean out rodding access etc.

A 100 mm dia 38 m 5.500 209.000

Ancillaries

B Rodding point 3 No 3.000 9.000

C 100 mm dia floor trap with grating & cover (Drainage

pick up point) 10 No 12.000 120.000



Rainwater Installations

2/72


75/115


MAIN BUILDING

ITEM AMOUNT

REF. (IN WORDS) (IN FIGURES) ( R.O. )


QTY UNIT

uPVC pipes and fittings to BS 4514 laid in floor

screed/wall chases with all support, insulation, all

accessories like cleanout, rodding access etc: complete

all as specified and directed

A 110 mm uPVC pipe to BS 4514 for rain water drain from

roof including necessary bend, clamps and fixing etc:

complete 107 m 1.600 171.200

B 82 mm uPVC pipe to BS 4514 for rain water drain from

roof including necessary bend, clamps and fixing etc:

complete 36 m 1.400 50.400

uPVC pipe work and fittings to BS 4514, diameter

C 110 mm diameter uPVC rain water outlet 14 No 4.000 56.000

D 82 mm diameter uPVC rain water outlet 6 No 3.500 21.000

E 75 mm diameter uPVC wipe off pipe, 475 mm long 15 No 2.800 42.000



Fire fighting Installation

2/73


76/115


MAIN BUILDING

ITEM AMOUNT



QTY UNIT

Supply and install for protection equipment to BS 5423

and BS 5759 of approved manufacturer including

enclosure, fixing in position all as per R.O.P

requirements and as approved

A Portable 5 Kg CO2 fire extinguisher 4 No 28.000 112.000

B Portable 9 Kg AFFF fire extinguisher 4 No 17.600 70.400

C Portable 9 Kg dry powder type 4 No 20.000 80.000

D Wall mounted 2 Kg CO2 fire extinguisher 2 No 7.000 14.000

E Fire blanket of size 1800 mm x 1220 mm in a container

of size 530 mm x 100 mm x 90 mm 2 No 13.300 26.600

F Fire extinguisher cabinet, recessed type including label

plate all in accordance with the specification and as

shown on the drawing no. FF-02 4 No 20.000 80.000


COLLECTION

2/62 9,657.250

2/74


77/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

2/63 881.700

2/64 1,072.000

2/65 561.500

2/66 3,002.600

2/67 1,680.000

2/68 1,747.600

2/69 832.000

2/70 850.000

2/71 918.000

2/72 338.000

2/73 340.600

2/74 383.000

MECHANICAL INSTALLATIONS 22,264.250


HVAC INSTALLATIONS

Air-conditioning System

R.O.

2/75


78/115

16 CLASSROOMS BOYS SCHOOL (5 & 12) AT AL DHAHIR, WAL WASIL BILL N

MAIN BUILD

ITEM AMOUN



Equipment

Supply & Install factory assembled and tested, Wall

mounted split AC unit (Indoor & Outdoor units) with

thermostat complete with remote control, anti-vibration

and anti-sound components and supply & install

refrigerant piping with insulation, condensation drainpiping, accessories, ancillaries including all necessary

supports, all as specified and as detailed on the

drawings

A Wall mounted Split unit with roof top outdoor condensing

unit capable of operating up to 52C, capacity 2.5 TR

19 Set 530.000 10,070.0

B Wall mounted Split unit with roof top outdoor condensing


9 Set 460.000 4,140.00

C Wall mounted Split unit with roof top outdoor condensing


48 Set 235.000 11,280.0


HVAC INSTALLATIONS ( Contd.)

Air-conditioning System (Contd.)


79/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Sundries

A Allow for condensation drain connections to floor traps,

to nearest manholes, to storm water manholes, to free

discharge beyond plinth protection all as indicated and

detailed on the drawings Item 152.000 152.000


COLLECTION

2/77


80/115


MAIN BUILDING



2/76 25,490.000

2/77 152.000

HVAC INSTALLATIONS 25,642.000


ELECTRICAL INSTALLATIONS

Electrical Distribution

R.O.

2/78


81/115


MAIN BUILDING

ITEM AMOUNT



QTY UNIT

Control Gear

Supply, installation, testing and commissioning of

Distribution Boards, Panel Boards, Meter Cubicles

including all connections, supports, accessories etc:

complete as specified and as directed

Main distribution board as ref.

A Main LV panel board as ref. MDB-1 1 No 1,930.000 1,930.000

B Main LV panel board as ref. MDB-2 1 No 2,010.000 2,010.000


ELECTRICAL INSTALLATIONS (Contd.)

Electrical Distribution (Contd.)

2/79


82/115


MAIN BUILDING

ITEM AMOUNT



QTY UNIT


Distribution Boards, Panel Boards, Meter Cubicles

including all connections, supports, accessories etc:

complete as specified and as directed

MCB distribution board ref:

A DB-GF1 1 No 400.000 400.000

B DB-GF2 1 No 370.000 370.000

C DB-GF3 1 No 395.000 395.000

D DB-GF4 1 No 320.000 320.000

E DB-GF5 1 No 315.000 315.000

F DB-GF6 1 No 420.000 420.000

G DB-GF7 1 No 400.000 400.000

H DB-FF1 1 No 420.000 420.000

J DB-FF2 1 No 410.000 410.000




2/80


83/115


MAIN BUILDING

ITEM AMOUNT



QTY UNIT


Distribution Boards, Panel Boards --- ditto ---- as

specified and as directed

MCB distribution board ref: (Contd.)

A DB-FF3 1 No 230.000 230.000

B DB-FF4 1 No 145.000 145.000

C DB-FF5 1 No 225.000 225.000

D DB-FF6 1 No 175.000 175.000

E DB-LRC-1 1 No 190.000 190.000

F DB-LRC-2 1 No 165.000 165.000

G DB-LRC-3 1 No 175.000 175.000

H DB-SSR 1 No 225.000 225.000

J 200A Contactor in a enclosure for DB-FF2 for science

lab 1 No 155.000 155.000




2/81


84/115


MAIN BUILDING

ITEM AMOUNT



QTY UNIT

Cable trays/trunking

A Supply and installation of 75 x 75 mm GI box for

multimedia screen control (JPS) 11 No 2.000 22.000

B Supply and installation of 100 x 100 mm PVC junction

box for multimedia projector on ceiling (JMMP) 47 m 3.000 141.000

C 300 x 300 mm draw box 2 No 10.000 20.000

PVC skirting trunking

D 3 compartment PVC skirting trunking in server room 14 m 15.000 210.000



Cabling

2/82


85/115


MAIN BUILDING

ITEM AMOUNT



QTY UNIT

Supply and installation of following cables between main

boards, sub-boards, distribution boards and air

conditioning control panels including all connections as


A 4C x 35 mm2 XLPE/SWA/PVC/CU/ LV cable + 25 mm2

earth cable from MDB-1 to DB-GF1 70 m 6.750 472.500

B 4C x 35 mm2 XLPE/SWA/PVC/CU/ LV cable + 25 mm2


C 4C x 35 mm2 XLPE/SWA/PVC/CU/ LV cable + 25 mm2


D 4C x 35 mm2 XLPE/SWA/PVC/CU/ LV cable + 25 mm2


E 4C x 35 mm2 XLPE/SWA/PVC/CU/ LV cable + 25 mm2


F 4C x 35 mm2 XLPE/SWA/PVC/CU/ LV cable + 25 mm2




Cabling (Contd.)

2/83


86/115


MAIN BUILDING

ITEM AMOUNT



QTY UNIT

Supply and installation of following cables ---- ditto -----

including all connections as specified and as directed

A 4C x 35 mm2 XLPE/SWA/PVC/CU/ LV cable + 25 mm2


B 4C x 35 mm2 XLPE/SWA/PVC/CU/ LV cable + 25 mm2

earth cable from MDB-1 to DB-FF1 74 m 6.750 499.500

C 4C x 35 mm2 XLPE/SWA/PVC/CU/ LV cable + 25 mm2


D 4C x 35 mm2 XLPE/SWA/PVC/CU/ LV cable + 25 mm2


E 4C x 35 mm2 XLPE/SWA/PVC/CU/ LV cable + 25 mm2


F 4C x 35 mm2 XLPE/SWA/PVC/CU/ LV cable + 25 mm2




Cabling (Contd.)

2/84


87/115


88/115


MAIN BUILDING

ITEM AMOUNT



QTY UNIT

Final sub-circuits and auxiliary installations

Lighting and other ancillary installation in concealed

point wiring, including conduiting, cabling, junction

boxes, terminal boxes, pull wires etc: complete all as


A Luminaire 363 No 9.000 3,267.000

B Ceiling fan with regulator 95 No 7.000 665.000

C Switch 166 No 7.000 1,162.000

D Exhaust fan 31 No 8.000 248.000

E 400 mm dia wall mounted fan 1 No 10.000 10.000



Lighting Installation (Contd.)

2/86


89/115


MAIN BUILDING

ITEM AMOUNT



QTY UNIT

Equipment

Supply and installation of light fittings, including lamps,

heat resistance flex outlet, suspension system, support

system etc: complete all as specified and as directed

A Light fitting, type-A 113 No 20.000 2,260.000

B Light fitting, type-B 84 No 14.000 1,176.000

C Light fitting, type-C 13 No 10.000 130.000

D Light fitting, type-D 23 No 13.000 299.000

E Light fitting, type-E 6 No 22.500 135.000

F Light fitting, type-F 39 No 15.000 585.000

G Light fitting, type-G 6 No 9.000 54.000




2/87


90/115


MAIN BUILDING

ITEM AMOUNT



QTY UNIT

Equipment (Contd.)




A Light fitting, type-H 16 No 28.500 456.000

B Light fitting, type-J 50 No 20.000 1,000.000

C Exit light 7 No 25.000 175.000

D Emergency light 6 No 28.000 168.000




Equipment (Contd.)

2/88


91/115


MAIN BUILDING

ITEM AMOUNT



QTY UNIT




Ceiling & Wall Bracket Fans

A Supply and installation of ceiling fan with regulator,

flexible cord, fan hook etc: complete as specified and as 95 No 12.500 1,187.500

B 400 mm dia wall bracket fan 1 No 24.000 24.000

Exhaust Fans

C 250 mm dia exhaust fan 25 No 16.000 400.000

D 300 mm dia industrial type exhaust fan with external 5 No 35.000 175.000

E Explosion proof exhaust fan 1 No 40.000 40.000




Accessories

2/89


92/115


MAIN BUILDING

ITEM AMOUNT


UNIT RATE ( R.O.)

QTY UNIT

Flush mounted small power accessories in white plastic

finish for lighting installations to BS 3676

A 1 gang 1 way 20A grid switch 8 No 1.600 12.800

B Ditto, weatherproof 13 No 5.750 74.750

C 2 gang 1 way 20A grid switch 53 No 3.200 169.600

D Ditto, weatherproof 3 No 6.900 20.700

E 3 gang 1 way 20A grid switch 38 No 4.700 178.600

F Ditto, weatherproof 7 No 7.800 54.600

G 1 gang 2 way 20A grid switch weatherproof 38 No 5.750 218.500

H 2 gang 2 way 20A grid switch 4 No 3.200 12.800

J Ditto, weatherproof 2 No 6.900 13.800

K 5A, flex outlet for exhaust fan 31 No 1.700 52.700

L Emergency shutter fireman switch with key reset 1 No 30.000 30.000



Power Installation

Final sub-circuits and auxiliary installations

2/90


93/115


MAIN BUILDING

ITEM AMOUNT



QTY UNIT

Small power installations, concealed point wiring with

fire proof cable in PVC sheathed G.I. flexible conduits

including conduiting, cabling, junction boxes,

Documents

01 Main Building