Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
-2311 -2321
Shaft Collars
Product Name Set Screw -Standard Type / Wide Type- -Compact Type- Clamp -Standard Type-
Page 237 238 239
-Compact Type- Split -Standard Type- -Compact Type- -Balanced Type-
240 241 242 242
Set Screw -2-Hole / 2 Female Thread Type- -4 Hole / 4 Female Thread Type- Clamp -2 Hole Counterbored / 3 Hole Counterbored Type- -2 Hole / 2 Female Thread Type-
243 243 244 245
-3 Hole / 3 Female Thread Type- Wedge -2 Hole / 2 Female Thread Type- -3 Hole / 3 Female Thread Type- Split -2-Hole / 2 Female Thread Type-
246 247 247 248
Keyless Bushing Type -Standard- -Keyless Bushing Quick Mount (Nut) Type- Standard Type with Urethane Disc -Clamp Type- -Split Type-
249 249 250 250
Compact Type with Urethane Disc -Clamp Type- -Split Type- With Bearing Shoulder -Set Screw Type- -Set Screw Compact Type-
250 250 251 252
With Bearing Shoulder -Clamp Type- -Compact Slit Type- With Thread Inserts (Lightweight) -Resin Type- -Aluminum Type-
253 254 255 255
With Key Escapement Groove -Set Screw Flat Type- -Clamp Type- Standard Type with Clamp Lever -Clamp Type- -D Cut Type- -Side Mount Hole Type-
258 258 259 259 259
Compact Type with Clamp Lever -D Cut Type- -Side Mount Hole Type- Compact Wedge Type with Clamp Lever -D Cut Type- Wedge -Side Mount Hole Type-
260 260 261 261
Two-Flats -Standard Clamp Type- -Cut Surface Mount Hole Clamp Type- Two-Flats -Clamp Type with Side Utility Holes- -Split Type with Utility Holes on Flats-
262 262 262 262
Side Mount -Clamp Type- -Split Type- Side Mount Compact -Clamp Type- -Split Type-
263 263 264 264
D Cut Standard -Set Screw Flat Type - -Clamp Type- -Split Type-
265 265 265
D Cut Compact -Clamp Type- -Split Type-
266 266
Female Thread -Set Screw Flat Type- -Clamp Type- Hinged Type One Touch Type -Standard / Mount Hole-
256 256 257 257
Shaft Collars
Addition Addition Addition
Price Reduction5%
Price Reduction5%
Price ReductionUp to 46%
Price ReductionUp to 46 %
Price ReductionUp to 45%
Price ReductionUp to 46%
Price ReductionUp to 46 %
-2311 -2321
Shaft Collars
Product Name Set Screw -Standard Type / Wide Type- -Compact Type- Clamp -Standard Type-
Page 237 238 239
-Compact Type- Split -Standard Type- -Compact Type- -Balanced Type-
240 241 242 242
Set Screw -2-Hole / 2 Female Thread Type- -4 Hole / 4 Female Thread Type- Clamp -2 Hole Counterbored / 3 Hole Counterbored Type- -2 Hole / 2 Female Thread Type-
243 243 244 245
-3 Hole / 3 Female Thread Type- Wedge -2 Hole / 2 Female Thread Type- -3 Hole / 3 Female Thread Type- Split -2-Hole / 2 Female Thread Type-
246 247 247 248
Keyless Bushing Type -Standard- -Keyless Bushing Quick Mount (Nut) Type- Standard Type with Urethane Disc -Clamp Type- -Split Type-
249 249 250 250
Compact Type with Urethane Disc -Clamp Type- -Split Type- With Bearing Shoulder -Set Screw Type- -Set Screw Compact Type-
250 250 251 252
With Bearing Shoulder -Clamp Type- -Compact Slit Type- With Thread Inserts (Lightweight) -Resin Type- -Aluminum Type-
253 254 255 255
With Key Escapement Groove -Set Screw Flat Type- -Clamp Type- Standard Type with Clamp Lever -Clamp Type- -D Cut Type- -Side Mount Hole Type-
258 258 259 259 259
Compact Type with Clamp Lever -D Cut Type- -Side Mount Hole Type- Compact Wedge Type with Clamp Lever -D Cut Type- Wedge -Side Mount Hole Type-
260 260 261 261
Two-Flats -Standard Clamp Type- -Cut Surface Mount Hole Clamp Type- Two-Flats -Clamp Type with Side Utility Holes- -Split Type with Utility Holes on Flats-
262 262 262 262
Side Mount -Clamp Type- -Split Type- Side Mount Compact -Clamp Type- -Split Type-
263 263 264 264
D Cut Standard -Set Screw Flat Type - -Clamp Type- -Split Type-
265 265 265
D Cut Compact -Clamp Type- -Split Type-
266 266
Female Thread -Set Screw Flat Type- -Clamp Type- Hinged Type One Touch Type -Standard / Mount Hole-
256 256 257 257
Shaft Collars
Addition Addition Addition
Price Reduction5%
Price Reduction5%
Price ReductionUp to 46%
Price ReductionUp to 46 %
Price ReductionUp to 45%
Price ReductionUp to 46%
Price ReductionUp to 46 %
-2331 -2341
Shaft Collars Guide
Page P.237 · 238 P.243 P.256 P.258
Series Standard 2 Hole2 Female Thread
4 Hole4 Female Thread Male Thread Bore with Key Escapement
Groove
Thickness Standard Wide Compact Standard Standard Standard Standard
Picture
M Material S Surface Treatment
1.1191/C45EBlack Oxide Coating
Electroless Nickel Plating
1.4301/X5CrNi18-10 - -
EN AW-2017/AlCu4MgSi
- - - - - - -Clear Anodize - - - - - -Black Anodize - - - - - -
Page P.239 · 240 · P.255 P.245 P.246 P.244 P.250 P.258 P.256 P.262
Series Standard 2 Hole2 Female Thread
3 Hole3 Female Thread
2 HoleCounterbored
3 HoleCounterbored With Urethane with Key Escapement
GrooveMale Thread
Bore 2-Flats
Thickness Standard Compact Standard Standard Standard Standard Standard Compact Standard Standard Standard
Picture
M Material S Surface Treatment
1.1191/C45EBlack Oxide Coating
Electroless Nickel Plating
1.4301/X5CrNi18-10 - -
EN AW-2017/AlCu4MgSi
With Thread Inserts - - - - - - - - - -- - - - - - - - - - -
Clear Anodize - - - - - - - - - -Black Anodize - - - - - - - - - -
PolyacetalWith Thread Inserts - - - - - - - - - -
- - - - - - - - - - -MC Nylon With Thread Inserts - - - - - - - - - -
Page P.241 · 242 · P.255 P.248 P.242 P.250 P.251 · 252 P.253 · 254
Series Standard 2 Hole2 Female Thread Balanced With Urethane Set Screw
Short Shoulder · Long ShoulderSlit
Short Shoulder · Long Shoulder
Thickness Standard Compact Standard Standard Standard Compact Standard Compact Standard Compact
Picture
M Material S Surface Treatment
1.1191/C45EBlack Oxide Coating
Electroless Nickel Plating
1.4301/X5CrNi18-10 -
EN AW-2017/AlCu4MgSi
With Thread Inserts - - - - - - - - -- - - - - - - - - -
Clear Anodize - - - - - - -Black Anodize - - - - - - - - -
PolyacetalWith Thread Inserts - - - - - - - - -
- - - - - - - - - -MC Nylon With Thread Inserts - - - - - - - - -
Page P.263·264 P.262 P.265 · 266
Series
Side Mounting Holes 2-Flats D Cut
Slit SplitSlit
Cut Surface Mounting Holes
SlitSide Mounting
Holes
SplitCut Surface
Mounting HolesSet Screw Slit Split
Thickness Standard Compact Standard Compact Standard Standard Standard Standard Standard Compact Standard Compact
Picture
M Material S Surface Treatment
1.1191/C45EBlack Oxide Coating
Electroless Nickel Plating
1.4301/X5CrNi18-10 -
EN AW-2017/AlCu4MgSi - - - - - - - - -
QAbout Inner Diameter Tolerances
Features - MISUMI Shaft Collars have positively toleranced inner dia. (except some products) to prevent shafts from being scratched during insertion.
- Combination use of MISUMI Shafts (standard g6, f8 and h5) and MISUMI Shaft Collars are recommended.
QSplit Features - Post assembly installation and removal are possible, making for easy maintenance.
- Shaft damage from tightening can be avoided.
QMaterial Variations
Features- In addition to the industry standard material 1.1191/C45E · 1.4301/X5CrNi18-10 · EN AW-2017/AlCu4MgSi, Plastics and thread inserts integrated EN AW-2017/AlCu4MgSi and plastic
products are offered.
- Thread Inserts integrated type is recommended for aluminum or plastic collars that are lighter in weight but the threads cut directly in materials may be damaged by repetitive screw tightening and loosening. WP.255
- Specific Gravity 1.1191/C45E:7.9, 1.4301/X5CrNi18-10:8.0, EN AW-2017/AlCu4MgSi:2.8, Polyacetal:1.4, MC Nylon:1.1
QSet Screw Type Features - Reasonably priced.
QSlit Features - Shaft damage from tightening can be avoided. EMaximum thrust load data (Series: Standard) are shown on P.236.
QFor Bearing Fixing Features - For bearing inner race retention.
- Requires no dedicated tools, and economical compared to bearing nuts.
Features - Less force is required for tightening. No constraints on tightening sequence.
QProduct Variations
Features - 216 total product types consisting 119 industry standard products and 97 MISUMI original products are available. (Including material variations)
- The Compact Type has small width (B dim.) and O.D. (D1 dim.) helpful in space saving designs.
QFor Sensor Bracket Mounting Features- Tap sizes and hole pitches for direct mounting of sensor brackets are offered. EN AW-2017/AlCu4MgSi (aluminum) is recommended for weight reduction requirements. (Specifi c Gravity EN AW-2017/AlCu4MgSi:2.8, 1.1191/C45E:7.9, 1.4301/X5CrNi18-10:8.0)
B
D1
Page P.257 P.259 · 260 P.257
SeriesOne Touch With Clamp Lever
HingedStandard Mounting Holes Standard Cut Surface Mounting Holes Side Mounting Holes
Thickness Standard Standard Standard Standard Compact Standard Compact Standard
Picture
MMaterial S Surface Treatment
1.1191/C45EBlack Oxide Coating - -Electroless Nickel Plating - -
1.4301/X5CrNi18-10 - - -EN AW-2017/AlCu4MgSi Clear Anodize - - - - - -
QOthers Features - MISUMI originally inspired products are offered in consideration for on-site operability.
Page P.249
SeriesKeyless Bushing Type
Side Ring Simple Nut Type
Picture
M Material S Surface Treatment
1.1191/C45EBlack Oxide Coating
Electroless Nickel Plating
1.4301/X5CrNi18-10 -
QFor Stopper Applications Features - MISUMI originally inspired products are offered with enhanced thrust load ratings.EMaximum thrust load data are shown on P.236.
Page P.247 P.261
Series
Wedge Type Wedge Type with Clamp Lever2 Hole
2 Female Thread3 Hole
3 Female Thread Cut Surface Mounting Holes Side Mounting Holes
Picture
M Material S Surface Treatment
1.1191/C45EBlack Oxide Coating
Electroless Nickel Plating
1.4301/X5CrNi18-10 -
Price ReductionUp to 45%
Price ReductionUp to 10%
Price ReductionUp to 18%
Price Reduction5%
Price Reduction5%
-2331 -2341
Shaft Collars Guide
Page P.237 · 238 P.243 P.256 P.258
Series Standard 2 Hole2 Female Thread
4 Hole4 Female Thread Male Thread Bore with Key Escapement
Groove
Thickness Standard Wide Compact Standard Standard Standard Standard
Picture
M Material S Surface Treatment
1.1191/C45EBlack Oxide Coating
Electroless Nickel Plating
1.4301/X5CrNi18-10 - -
EN AW-2017/AlCu4MgSi
- - - - - - -Clear Anodize - - - - - -Black Anodize - - - - - -
Page P.239 · 240 · P.255 P.245 P.246 P.244 P.250 P.258 P.256 P.262
Series Standard 2 Hole2 Female Thread
3 Hole3 Female Thread
2 HoleCounterbored
3 HoleCounterbored With Urethane with Key Escapement
GrooveMale Thread
Bore 2-Flats
Thickness Standard Compact Standard Standard Standard Standard Standard Compact Standard Standard Standard
Picture
M Material S Surface Treatment
1.1191/C45EBlack Oxide Coating
Electroless Nickel Plating
1.4301/X5CrNi18-10 - -
EN AW-2017/AlCu4MgSi
With Thread Inserts - - - - - - - - - -- - - - - - - - - - -
Clear Anodize - - - - - - - - - -Black Anodize - - - - - - - - - -
PolyacetalWith Thread Inserts - - - - - - - - - -
- - - - - - - - - - -MC Nylon With Thread Inserts - - - - - - - - - -
Page P.241 · 242 · P.255 P.248 P.242 P.250 P.251 · 252 P.253 · 254
Series Standard 2 Hole2 Female Thread Balanced With Urethane Set Screw
Short Shoulder · Long ShoulderSlit
Short Shoulder · Long Shoulder
Thickness Standard Compact Standard Standard Standard Compact Standard Compact Standard Compact
Picture
M Material S Surface Treatment
1.1191/C45EBlack Oxide Coating
Electroless Nickel Plating
1.4301/X5CrNi18-10 -
EN AW-2017/AlCu4MgSi
With Thread Inserts - - - - - - - - -- - - - - - - - - -
Clear Anodize - - - - - - -Black Anodize - - - - - - - - -
PolyacetalWith Thread Inserts - - - - - - - - -
- - - - - - - - - -MC Nylon With Thread Inserts - - - - - - - - -
Page P.263·264 P.262 P.265 · 266
Series
Side Mounting Holes 2-Flats D Cut
Slit SplitSlit
Cut Surface Mounting Holes
SlitSide Mounting
Holes
SplitCut Surface
Mounting HolesSet Screw Slit Split
Thickness Standard Compact Standard Compact Standard Standard Standard Standard Standard Compact Standard Compact
Picture
M Material S Surface Treatment
1.1191/C45EBlack Oxide Coating
Electroless Nickel Plating
1.4301/X5CrNi18-10 -
EN AW-2017/AlCu4MgSi - - - - - - - - -
QAbout Inner Diameter Tolerances
Features - MISUMI Shaft Collars have positively toleranced inner dia. (except some products) to prevent shafts from being scratched during insertion.
- Combination use of MISUMI Shafts (standard g6, f8 and h5) and MISUMI Shaft Collars are recommended.
QSplit Features - Post assembly installation and removal are possible, making for easy maintenance.
- Shaft damage from tightening can be avoided.
QMaterial Variations
Features- In addition to the industry standard material 1.1191/C45E · 1.4301/X5CrNi18-10 · EN AW-2017/AlCu4MgSi, Plastics and thread inserts integrated EN AW-2017/AlCu4MgSi and plastic
products are offered.
- Thread Inserts integrated type is recommended for aluminum or plastic collars that are lighter in weight but the threads cut directly in materials may be damaged by repetitive screw tightening and loosening. WP.255
- Specific Gravity 1.1191/C45E:7.9, 1.4301/X5CrNi18-10:8.0, EN AW-2017/AlCu4MgSi:2.8, Polyacetal:1.4, MC Nylon:1.1
QSet Screw Type Features - Reasonably priced.
QSlit Features - Shaft damage from tightening can be avoided. EMaximum thrust load data (Series: Standard) are shown on P.236.
QFor Bearing Fixing Features - For bearing inner race retention.
- Requires no dedicated tools, and economical compared to bearing nuts.
Features - Less force is required for tightening. No constraints on tightening sequence.
QProduct Variations
Features - 216 total product types consisting 119 industry standard products and 97 MISUMI original products are available. (Including material variations)
- The Compact Type has small width (B dim.) and O.D. (D1 dim.) helpful in space saving designs.
QFor Sensor Bracket Mounting Features- Tap sizes and hole pitches for direct mounting of sensor brackets are offered. EN AW-2017/AlCu4MgSi (aluminum) is recommended for weight reduction requirements. (Specifi c Gravity EN AW-2017/AlCu4MgSi:2.8, 1.1191/C45E:7.9, 1.4301/X5CrNi18-10:8.0)
B
D1
Page P.257 P.259 · 260 P.257
SeriesOne Touch With Clamp Lever
HingedStandard Mounting Holes Standard Cut Surface Mounting Holes Side Mounting Holes
Thickness Standard Standard Standard Standard Compact Standard Compact Standard
Picture
MMaterial S Surface Treatment
1.1191/C45EBlack Oxide Coating - -Electroless Nickel Plating - -
1.4301/X5CrNi18-10 - - -EN AW-2017/AlCu4MgSi Clear Anodize - - - - - -
QOthers Features - MISUMI originally inspired products are offered in consideration for on-site operability.
Page P.249
SeriesKeyless Bushing Type
Side Ring Simple Nut Type
Picture
M Material S Surface Treatment
1.1191/C45EBlack Oxide Coating
Electroless Nickel Plating
1.4301/X5CrNi18-10 -
QFor Stopper Applications Features - MISUMI originally inspired products are offered with enhanced thrust load ratings.EMaximum thrust load data are shown on P.236.
Page P.247 P.261
Series
Wedge Type Wedge Type with Clamp Lever2 Hole
2 Female Thread3 Hole
3 Female Thread Cut Surface Mounting Holes Side Mounting Holes
Picture
M Material S Surface Treatment
1.1191/C45EBlack Oxide Coating
Electroless Nickel Plating
1.4301/X5CrNi18-10 -
Price ReductionUp to 45%
Price ReductionUp to 10%
Price ReductionUp to 18%
Price Reduction5%
Price Reduction5%
-2351 -2361
Shaft Collars Guide-Keyless Bushing Mechanism · Wedge Mechanism · Clamping Force Data-
QTesting Conditions
1. Shaft: MISUMI Hardening Shaft (SFJ) Page P.1072. Testing Instrument: Universal Tester3. Tightening Torque: Select Tightening Torque from the tables on
the right depending on the conditions of use.4. Condition of antirust oil: Wiped with a cloth as arrived.
QDefinition of Max. Thrust Load
The shaft collar is tightened to torque value(s) shown in the chart below, then compressive load is applied with the tester. The compressive load where the shaft begins to move is defined as the Max. Thrust Load.
Note 1. * marked are Compact Types only. (SCSJ, SSCSJ) 2. These values are merely test results, and not guaranteed
by the manufacturer. 3. Use optimum tightening torques depending on the
condition of use by users.
EFormula for weight: Weight(g) = Volume(cm3) x Specific Gravity DP.1889 Specific Gravity EN Aw-2017/AlCu4MgSi:2.8, 1.1191/C45E:7.9, 1.4301/X5CrNi18-10:8.0
( )
QAbout screw tightening
Aluminum or plastic threads may be damaged by repetitive tightening and loosening of a screw.
Compression
Testing Instrument
Shaft Collar Clamp Type
Shaft
QTesting Method
QClamp Type
Shaft
Body Ring Lock Screw
Shaft
Body Nut
QCylinder Stopper
(4) Dog Set(2) Sensor Rail
(1) Photo Sensor(3) Rail Mounting Screw
QTightening from axial direction
Collar Screw
WedgeWedge Screw
Collar
Shaft
QClamping force of Clamp Type · Wedge Type and Keyless Bushing Type shaft collars.
QKeyless Bushing Mechanism Features
- Clamping force increased up to 2.2 times *D35 is used for comparison.
Compared with the conventional Shaft Collars, these Collars can clamp the shafts firmly. D Refer to Clamping Force Data on P.236.
- Easy installation in space-savings
Collar tightening action is applied in axial direction from the front, effective where radial access is limited.
- 8 Parts are reduced by using the Sensor-less System.
As these Collars can clamp the shafts firmly, the Shaft Collar can be used as a home position.
QKeyless Bushing Type - Standard Type Mechanism QKeyless Bushing Type - Nut Type Mechanism
QInstallation(1) Clean (wipe off) shaft surface.(2) Clean (wipe off) contact surface of the body and ring (nut) as well. (3) Temporarily assemble the body and ring (nut) and insert the shaft. (Do not tighten the screws without a shaft inserted.) (4) After positioning the collar, tighten the locking screws with a torque wrench in a diagonal order,
beginning lightly (approx. 1/4 of the specified tightening torque). (5) Tighten the screws further to an increased torque
(approximately 1/2 specified torque).(6) Tighten the screws to specified torque.(7) Finally, tighten the lock screws in circumferential order.
Standard Type on D P.249
Quick Mount Type on DP.249
Use Standard Type on W P.249
QCautions for Installation- For Keyless Bushing Type, tighten the screws after the shaft is inserted. (If the screws are tightened before the shaft is inserted, the locking
mechanism would be deformed.)- Use a torque wrench to tighten the screws.- Do not use lock screws other than those included.
D P.236 For the recommended tightening torque, please refer to Clamping Force Data.
QRemoval- Be sure the system is completely shut down and stopped before beginning the
work.- Loosen lock screws in circumferential order.- Insert screws in removal holes and tighten evenly.- Repeat "Installation" process for re-installation.
*The Shaft collar is used as a home position.*Motor with an absolute encoder is used for this example.
EAdvantages of sensor-less systems- Reduced parts count (in the case above)(1) 3 Photo Sensors + (2) 1 Sensor Rail+(3) 3 Rail Mounting Screws + (4) 1 Sensor Target= 8 parts can be reduced.- No breakdown by sensor disconnection.- Troubles from sensor errors can be reduced.- Adjustments and maintenance can be reduced.
QWedge Mechanism Features
- The screws pull a wedge and the shat is clamped; this structure requires less force for tightening.- Good work efficiency; suitable for use in frequent positioning adjustments like width guide applications.
The wedge for “With Clamp Lever Type” (P.261) is made of brass and does not damage shafts.
QProposals for Parts Reduction
Conventional Shaft Collar in Use
Keyless Bushing Type in Use
Example
QClamp Type / Wedge Type
NominalTightening Torque (Nm)
1.1191/C45E / 1.4301/X5CrNi18-10 EN AW-2017/AlCu4MgSi
M2.6 0.94 -M3 1.61 1.61M4 3.71 3.71M5 7.54 7.54M6 12.87 7.54M8 31.2 12.87M10 61.75 12.87M16 267 -
QKeyless Bushing Type - Standard Type -
NominalTightening Torque (Nm)
1.1191/C45E 1.4301/X5CrNi18-10
M6 15.7 9.6
QKeyless Bushing Type - Nut Type -
D(Inner Diameter)
Tightening Torque (Nm)
1.1191/C45E
12 29.416 4920 10525 17130 21835 288
Dimension Max. Thrust Load (kN) Weight (g) Dimension Max. Thrust Load (kN) Weight (g)
D(In
ner D
iam
eter
)
B
(Wid
th)
MSCS / SCSJ
1.1191/C45EBlack oxide coating
SSCS(1.4301/
X5CrNi18-10)
SCSA(EN AW-2017/AlCu4MgSi)
SCS / SCSJ(1.1191/C45E)
D(In
ner D
iam
eter
)
B(W
idth
)
MSCS / SCSJ
1.1191/C45EBlack oxide coating
SSCS(1.4301/
X5CrNi18-10)
SCSA(EN AW-2017/AlCu4MgSi)
SCS / SCSJ(1.1191/C45E)
3 *8 3 0.5 0.5 0.4 11
16
*8 3 2.1 1.1 - 294 8 3 0.5 0.5 0.3 14 10 5 7.1 2.9 1.6 55
5*6 2.6 0.7 0.4 - 8 12 5 5.4 2.3 2.4 678 3 1.1 0.7 0.6 17 15 6 10.2 1.5 - 116
10 4 1.3 1.0 - 2618
*10 5 6.5 1.8 - 75
6*6 2.6 0.7 0.4 - 10 12 5 5.1 2.3 - 898 3 1.1 0.5 0.4 17 15 6 9.4 1.6 - 148
10 4 1.8 1.0 - 21
20
*8 3 2.2 0.8 - 38
8
*6 2.6 0.9 0.3 - 14 10 5 5.8 2.7 1.4 698 3 0.6 0.6 0.1 26 12 5 6.4 1.7 3.4 84
10 4 2.2 1.1 0.3 32 15 6 10.4 3.0 3.0 14012 5 3.3 1.5 - 58
25
*10 4 3.6 1.8 - 6615 6 5.1 1.2 - 71 12 5 8.8 2.6 2.1 98
10
*6 2.6 0.7 0.3 - 17 15 6 8.8 3.6 2.0 1648 3 1.2 0.4 - 36 20 6 10.0 1.2 - 284
10 4 2.0 1.0 0.3 4530
*12 5 8.4 2.8 - 11112 5 5.1 0.9 - 55 15 6 8.9 2.2 2.4 18515 6 3.9 2.1 - 95 20 8 15.0 4.0 - 318
12
*6 2.6 0.7 0.3 - 16 35 *12 5 6.4 2.4 - 1248 3 1.1 0.8 - 34 15 6 9.9 2.7 1.8 207
10 4 2.8 0.8 0.5 43 40 *12 5 7.0 3.1 - 13912 5 4.0 1.2 - 52 18 8 21.3 6.0 6.3 34815 6 10.0 3.6 - 92 50 *18 8 18.0 4.5 - 415
13
*8 3 1.1 0.8 - 28 22 10 35.8 11.8 6.7 60410 4 2.0 0.7 0.7 43 60 22 10 21.0 - - 69812 5 5.9 1.3 - 67 80 32 16 90.0 - - 195415 6 4.6 1.6 - 90 100 36 16 120.0 - - 2639
15
*8 3 1.5 0.6 - 3110 4 1.5 1.1 1.4 5412 5 5.1 1.8 - 6915 6 5.6 1.4 - 119
( )
QKeyless Bushing Type - Standard Type -
Dimension Max. Thrust Load (kN) Weight (g)
D(In
ner D
iam
eter
)
B(W
idth
)
M
Scr
ewQ
uant
ity SCML1.1191/C45E
Black oxide coating
SSCML(1.4301/
X5CrNi18-10)
SCML(1.1191/C45E)
12 27 6 3 13.3 4.0 29116 27 6 3 13.3 4.0 25920 27 6 4 17.8 5.3 37225 27 6 4 17.8 5.3 37130 28.5 6 5 22.2 6.7 52335 28.5 6 5 22.2 6.7 534
QKeyless Bushing Type - Nut Type -
Dimension Max. Thrust Load (kN) Weight (g)
D(Inner
Diameter)
B(Width)
SCQL1.1191/C45E
Black oxide coating
SCQL(1.1191/C45E)
12 20 3.7 2916 25.5 5.4 5420 31.5 8.8 10525 36 15.7 17130 41 17.7 21835 45 20.6 288
( )
QWedge Type
Dimension Max. Thrust Load (kN) Weight (g)
D(In
ner
Dia
met
er)
B(W
idth
)
MSCWM1.1191/C45E
Black oxide coating
SSCWM(1.4301/
X5CrNi18-10)
SCWM(1.1191/C45E)
10 10 4 1.6 1.2 2912 10 4 2.2 1.4 3515 10 4 1.8 1.5 3716 12 5 3.0 2.3 5720 12 5 3.5 3.0 6925 12 5 3.5 3.2 8830 12 5 3.2 3.2 9435 15 6 - 3.1 15440 15 8 - 3.1 24350 15 8 - 3.1 299
( )
( )
( )
-2351 -2361
Shaft Collars Guide-Keyless Bushing Mechanism · Wedge Mechanism · Clamping Force Data-
QTesting Conditions
1. Shaft: MISUMI Hardening Shaft (SFJ) Page P.1072. Testing Instrument: Universal Tester3. Tightening Torque: Select Tightening Torque from the tables on
the right depending on the conditions of use.4. Condition of antirust oil: Wiped with a cloth as arrived.
QDefinition of Max. Thrust Load
The shaft collar is tightened to torque value(s) shown in the chart below, then compressive load is applied with the tester. The compressive load where the shaft begins to move is defined as the Max. Thrust Load.
Note 1. * marked are Compact Types only. (SCSJ, SSCSJ) 2. These values are merely test results, and not guaranteed
by the manufacturer. 3. Use optimum tightening torques depending on the
condition of use by users.
EFormula for weight: Weight(g) = Volume(cm3) x Specific Gravity DP.1889 Specific Gravity EN Aw-2017/AlCu4MgSi:2.8, 1.1191/C45E:7.9, 1.4301/X5CrNi18-10:8.0
( )
QAbout screw tightening
Aluminum or plastic threads may be damaged by repetitive tightening and loosening of a screw.
Compression
Testing Instrument
Shaft Collar Clamp Type
Shaft
QTesting Method
QClamp Type
Shaft
Body Ring Lock Screw
Shaft
Body Nut
QCylinder Stopper
(4) Dog Set(2) Sensor Rail
(1) Photo Sensor(3) Rail Mounting Screw
QTightening from axial direction
Collar Screw
WedgeWedge Screw
Collar
Shaft
QClamping force of Clamp Type · Wedge Type and Keyless Bushing Type shaft collars.
QKeyless Bushing Mechanism Features
- Clamping force increased up to 2.2 times *D35 is used for comparison.
Compared with the conventional Shaft Collars, these Collars can clamp the shafts firmly. D Refer to Clamping Force Data on P.236.
- Easy installation in space-savings
Collar tightening action is applied in axial direction from the front, effective where radial access is limited.
- 8 Parts are reduced by using the Sensor-less System.
As these Collars can clamp the shafts firmly, the Shaft Collar can be used as a home position.
QKeyless Bushing Type - Standard Type Mechanism QKeyless Bushing Type - Nut Type Mechanism
QInstallation(1) Clean (wipe off) shaft surface.(2) Clean (wipe off) contact surface of the body and ring (nut) as well. (3) Temporarily assemble the body and ring (nut) and insert the shaft. (Do not tighten the screws without a shaft inserted.) (4) After positioning the collar, tighten the locking screws with a torque wrench in a diagonal order,
beginning lightly (approx. 1/4 of the specified tightening torque). (5) Tighten the screws further to an increased torque
(approximately 1/2 specified torque).(6) Tighten the screws to specified torque.(7) Finally, tighten the lock screws in circumferential order.
Standard Type on D P.249
Quick Mount Type on DP.249
Use Standard Type on W P.249
QCautions for Installation- For Keyless Bushing Type, tighten the screws after the shaft is inserted. (If the screws are tightened before the shaft is inserted, the locking
mechanism would be deformed.)- Use a torque wrench to tighten the screws.- Do not use lock screws other than those included.
D P.236 For the recommended tightening torque, please refer to Clamping Force Data.
QRemoval- Be sure the system is completely shut down and stopped before beginning the
work.- Loosen lock screws in circumferential order.- Insert screws in removal holes and tighten evenly.- Repeat "Installation" process for re-installation.
*The Shaft collar is used as a home position.*Motor with an absolute encoder is used for this example.
EAdvantages of sensor-less systems- Reduced parts count (in the case above)(1) 3 Photo Sensors + (2) 1 Sensor Rail+(3) 3 Rail Mounting Screws + (4) 1 Sensor Target= 8 parts can be reduced.- No breakdown by sensor disconnection.- Troubles from sensor errors can be reduced.- Adjustments and maintenance can be reduced.
QWedge Mechanism Features
- The screws pull a wedge and the shat is clamped; this structure requires less force for tightening.- Good work efficiency; suitable for use in frequent positioning adjustments like width guide applications.
The wedge for “With Clamp Lever Type” (P.261) is made of brass and does not damage shafts.
QProposals for Parts Reduction
Conventional Shaft Collar in Use
Keyless Bushing Type in Use
Example
QClamp Type / Wedge Type
NominalTightening Torque (Nm)
1.1191/C45E / 1.4301/X5CrNi18-10 EN AW-2017/AlCu4MgSi
M2.6 0.94 -M3 1.61 1.61M4 3.71 3.71M5 7.54 7.54M6 12.87 7.54M8 31.2 12.87M10 61.75 12.87M16 267 -
QKeyless Bushing Type - Standard Type -
NominalTightening Torque (Nm)
1.1191/C45E 1.4301/X5CrNi18-10
M6 15.7 9.6
QKeyless Bushing Type - Nut Type -
D(Inner Diameter)
Tightening Torque (Nm)
1.1191/C45E
12 29.416 4920 10525 17130 21835 288
Dimension Max. Thrust Load (kN) Weight (g) Dimension Max. Thrust Load (kN) Weight (g)
D(In
ner D
iam
eter
)
B
(Wid
th)
MSCS / SCSJ
1.1191/C45EBlack oxide coating
SSCS(1.4301/
X5CrNi18-10)
SCSA(EN AW-2017/AlCu4MgSi)
SCS / SCSJ(1.1191/C45E)
D(In
ner D
iam
eter
)
B(W
idth
)
MSCS / SCSJ
1.1191/C45EBlack oxide coating
SSCS(1.4301/
X5CrNi18-10)
SCSA(EN AW-2017/AlCu4MgSi)
SCS / SCSJ(1.1191/C45E)
3 *8 3 0.5 0.5 0.4 11
16
*8 3 2.1 1.1 - 294 8 3 0.5 0.5 0.3 14 10 5 7.1 2.9 1.6 55
5*6 2.6 0.7 0.4 - 8 12 5 5.4 2.3 2.4 678 3 1.1 0.7 0.6 17 15 6 10.2 1.5 - 116
10 4 1.3 1.0 - 2618
*10 5 6.5 1.8 - 75
6*6 2.6 0.7 0.4 - 10 12 5 5.1 2.3 - 898 3 1.1 0.5 0.4 17 15 6 9.4 1.6 - 148
10 4 1.8 1.0 - 21
20
*8 3 2.2 0.8 - 38
8
*6 2.6 0.9 0.3 - 14 10 5 5.8 2.7 1.4 698 3 0.6 0.6 0.1 26 12 5 6.4 1.7 3.4 84
10 4 2.2 1.1 0.3 32 15 6 10.4 3.0 3.0 14012 5 3.3 1.5 - 58
25
*10 4 3.6 1.8 - 6615 6 5.1 1.2 - 71 12 5 8.8 2.6 2.1 98
10
*6 2.6 0.7 0.3 - 17 15 6 8.8 3.6 2.0 1648 3 1.2 0.4 - 36 20 6 10.0 1.2 - 284
10 4 2.0 1.0 0.3 4530
*12 5 8.4 2.8 - 11112 5 5.1 0.9 - 55 15 6 8.9 2.2 2.4 18515 6 3.9 2.1 - 95 20 8 15.0 4.0 - 318
12
*6 2.6 0.7 0.3 - 16 35 *12 5 6.4 2.4 - 1248 3 1.1 0.8 - 34 15 6 9.9 2.7 1.8 207
10 4 2.8 0.8 0.5 43 40 *12 5 7.0 3.1 - 13912 5 4.0 1.2 - 52 18 8 21.3 6.0 6.3 34815 6 10.0 3.6 - 92 50 *18 8 18.0 4.5 - 415
13
*8 3 1.1 0.8 - 28 22 10 35.8 11.8 6.7 60410 4 2.0 0.7 0.7 43 60 22 10 21.0 - - 69812 5 5.9 1.3 - 67 80 32 16 90.0 - - 195415 6 4.6 1.6 - 90 100 36 16 120.0 - - 2639
15
*8 3 1.5 0.6 - 3110 4 1.5 1.1 1.4 5412 5 5.1 1.8 - 6915 6 5.6 1.4 - 119
( )
QKeyless Bushing Type - Standard Type -
Dimension Max. Thrust Load (kN) Weight (g)
D(In
ner D
iam
eter
)
B(W
idth
)
M
Scr
ewQ
uant
ity SCML1.1191/C45E
Black oxide coating
SSCML(1.4301/
X5CrNi18-10)
SCML(1.1191/C45E)
12 27 6 3 13.3 4.0 29116 27 6 3 13.3 4.0 25920 27 6 4 17.8 5.3 37225 27 6 4 17.8 5.3 37130 28.5 6 5 22.2 6.7 52335 28.5 6 5 22.2 6.7 534
QKeyless Bushing Type - Nut Type -
Dimension Max. Thrust Load (kN) Weight (g)
D(Inner
Diameter)
B(Width)
SCQL1.1191/C45E
Black oxide coating
SCQL(1.1191/C45E)
12 20 3.7 2916 25.5 5.4 5420 31.5 8.8 10525 36 15.7 17130 41 17.7 21835 45 20.6 288
( )
QWedge Type
Dimension Max. Thrust Load (kN) Weight (g)
D(In
ner
Dia
met
er)
B(W
idth
)
MSCWM1.1191/C45E
Black oxide coating
SSCWM(1.4301/
X5CrNi18-10)
SCWM(1.1191/C45E)
10 10 4 1.6 1.2 2912 10 4 2.2 1.4 3515 10 4 1.8 1.5 3716 12 5 3.0 2.3 5720 12 5 3.5 3.0 6925 12 5 3.5 3.2 8830 12 5 3.2 3.2 9435 15 6 - 3.1 15440 15 8 - 3.1 24350 15 8 - 3.1 299
( )
( )
( )
-2371 -2381
CAD Data
Shaft Collars -Set Screw Type-
-Standard Type / Wide Type-
Shaft Collars -Set Screw Type-
-Compact Type-
QCompact Type
Part Number - B
SCCJ15SSCCJ25
--
510
OrderExample
D P.87DaysDays
to Ship
CAD Data
QStandard Type
QWide Type
D P.87 DaysDays
to ShipPart Number - B
SCCN12SF-SSCCN16
--
1012
OrderExample
Type MMaterial
S Surface Treatment
AAccessoryStandard Type Wide Type
SCCN SCC1.1191/C45E
Black Oxide Coating 2 Set Screws
PSCCN PSCC Electroless Nickel Plating
2 Set Screws
(JIS SUS)
SSCCN SSCC 1.4301/X5CrNi18-10-
SCCA -EN AW-2017/
AICu4MgSiSCCAW - Clear Anodize
SCCAB - Black Anodize
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 10% 18% 23%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Price
QVolume Discount (ERound down to one Cent.) P.87
- SCCN
Quantity 1~9 10~19 20~39 40~99Discount Rate € Unit Price 20% 30% 40%Days to Ship Standard To be quotedEFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%
Days to Ship Standard To be quoted
- SCC · PSCC · SSCC
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 10% 15% 23%
Days to Ship Standard To be quoted
- SCCAW
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 10% 15% 23%
Days to Ship Standard To be quoted
- SCCAB
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 10% 15% 18%
Days to Ship Standard
- SCCA
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~9 10~19 20~39 40~99Discount Rate € Unit Price 20% 30% 40%
Days to Ship Standard To be quoted
- PSCCN · SSCCN
EFor orders larger than indicated quantity, please request a quotation.
Price6
6
2 Days
2 Days
Part Number BSelectable
D1 d1 CSet ScrewM x Length
€ Unit PriceType D SCCJ PSCCJ SSCCJ
(Compact Type)
SCCJPSCCJSSCCJ
3
5
7
-
0.2
M3x3
4 85 116 128 1410 1612 19
0.5
13 2015 22
206
27M4x3
8 22.5
258
32 27.510
3010 39
32.5
1
M5x412 41 M6x5
3510 44
37.5M5x4
12 46 M6x5
4015 51
42.5M5x4
18 53 M6x5
Type M Material S Surface Treatment A Accessory
SCCJ 1.1191/C45EBlack Oxide Coating 2 Set Screws
PSCCJ Electroless Nickel Plating 2 Set Screws(JIS SUS)SSCCJ 1.4301/X5CrNi18-10 -
ECompactness Comparison Table
D
Size Differences Compact Standard (P.237)
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
3 -1 0 5 7 6 74 -1 0 5 8 6 85 -1 0 5 11 6 116 -1 0 5 12 6 128 -1 0 5 14 6 14
10 -1 0 5 16 6 1612 -1 -1 5 19 6 2013 -3 -2 5 20 8 2215 -3 -2 5 22 8 2420 -4 -5 6 27 10 3225 -4 -6 8 32 12 3830 -5 -7 10 39 15 4635 -5 -6 10 44 15 5040 -5 -9 15 51 20 60
(- For SCCA · SCCAW and SCCAB,* marked sizes are only available.- However, D18 is not available.- D50 - B20 is applicable to
SCCN and SSCCN only.)
Part Number BSelectable
D1 d1 CSet ScrewM x Length
€ Unit Price
Type DH7 SCC PSCC SSCC
(Wide Type)
SCCPSCCSSCC
E* 30°chamfering is not available for Wide Type D5 and D6.
(D1=*d1)
5+ 0.012
0
6 *8 14 *14
0.5
M4x4
66 8 15 *15
*1016
*16
8+ 0.015
0
813
1018
108
1610 20
12
+ 0.0180
8 22
2010 12 26 M5x5
13*8 22 M4x4
10 26M5x5
158 10 25
24*12 28
20
+ 0.0210
10 12 15 32 29M6x6
25 12 15 *18 42 38
3016 45
42
1M8x8*20 49
35+ 0.025
0
*20 59 4740 *20 *22 72 55
M10x1050 *25 79 65
B dimensions with* are applicable to SCC only. )
Up to 46% Up to 45%
Part Number BSelectable
D1 d1 CSet ScrewM x Length
€ Unit Price
Type D SCCN PSCCN SSCCN SCCA SCCAW SCCAB
(Standard Type)
SCCNPSCCNSSCCNSCCASCCAWSCCAB
3
+0.05+0.01
*6 8 7 4.5
0.2
M3x34 *6 8 8 5.55 *6 8 10 11 10
M4x36 *6 *8 *10 12 118 *6 *8 *10 14 1210 *6 *8 *10 16 1312 6 *8 *10 12 20 15
0.5
M5x4for B6M4x3
13 *8 10 12 22 1815 *8 *10 12 24 2016 8 *10 12 15 26 22 M6x5
for B8M5x4
18∙20 *10 12 *15 32 2725 *12 15 18 38 3130 *15 18 20 46 38
1M8x6
35 *15 18 20 50 4040 *20 22 60 45
M10x850 20 *22 25 70 55
QFeatures P.237: Smaller by up to 25% in width (B dimension) and 15% in outer diameter (D1 dimension) than the Standard Type.
SCCNS(P.256)
Bearing Housing
Bearings
Shaft
SCCJ
SCCJ15-5
Example
6.325
B/2
B
Dd
2–M30°
1
+_0.1
6.3
6.3
6.3
A
0.02 A
C
2–C
D+_ 0
.11
QFeatures- Replacing the Hexagon Socket Set Screws with Knurled Knobs enables
easy installation and removal of the Shaft Collar by hand.- Set Screws come with loose-prevention coating (*For details, see P.251).
* The knob that matches with dimension "B Selection" and dimension "M (Coarse) " is included.Ex. When a Knob is specifi ed for SCCN10-8, Knurled Knobs of B8 and M4 are included.
M Material: 1.4301/X5CrNi18-10
Part Number - B - (KB / WKB)
SCCN12 - 10 - KBAlterations
Alterations With Knurled Knob(Hand Tightening Type)
Code KB(1 pc.) / WKB(2 pcs.)
Spec. EA Set Screw is also included.
Order Code KB (or WKB)
E3≤D≤25E8≤B≤18
€ KB :B8 2,00 EUR/B10, 12 3,00 EUR/B15, 18 4,00 EURWKB :B8 2,00 EUR/B10, 12 3,00 EUR/B15, 18 4,00 EUR
BSelectable
M(Coarse Thread)
D L T
83
7.5 6
3
45 8
104
9.56
586
125 11.5 46 10
15 6 14.518 6 15.5 10 5
D T L
Parallel Knurling
M
Thread Locking Coating-Main Component: Nylon Resin-Operation Temperature Range: - 40~150°C
Knurled Knob Details
Attaches a knurled knob.
*For detailed dimensions, see the right-hand side.
6.325
2-C
2-C
6.3
+0.
05D
+0.
01
6.3
B/2B±0.1 6.30.02 A
A2-M
6.3 B/2
6.3
6.3
2-M C
2-C
A
0.02 A
30°
D1±
0.1
D1±
0.1
d1 +0.
05D
+0.
01
B±0.1
B≥8B=5, 6
-2371 -2381
CAD Data
Shaft Collars -Set Screw Type-
-Standard Type / Wide Type-
Shaft Collars -Set Screw Type-
-Compact Type-
QCompact Type
Part Number - B
SCCJ15SSCCJ25
--
510
OrderExample
D P.87DaysDays
to Ship
CAD Data
QStandard Type
QWide Type
D P.87 DaysDays
to ShipPart Number - B
SCCN12SF-SSCCN16
--
1012
OrderExample
Type MMaterial
S Surface Treatment
AAccessoryStandard Type Wide Type
SCCN SCC1.1191/C45E
Black Oxide Coating 2 Set Screws
PSCCN PSCC Electroless Nickel Plating
2 Set Screws
(JIS SUS)
SSCCN SSCC 1.4301/X5CrNi18-10-
SCCA -EN AW-2017/
AICu4MgSiSCCAW - Clear Anodize
SCCAB - Black Anodize
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 10% 18% 23%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Price
QVolume Discount (ERound down to one Cent.) P.87
- SCCN
Quantity 1~9 10~19 20~39 40~99Discount Rate € Unit Price 20% 30% 40%Days to Ship Standard To be quotedEFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%
Days to Ship Standard To be quoted
- SCC · PSCC · SSCC
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 10% 15% 23%
Days to Ship Standard To be quoted
- SCCAW
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 10% 15% 23%
Days to Ship Standard To be quoted
- SCCAB
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 10% 15% 18%
Days to Ship Standard
- SCCA
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~9 10~19 20~39 40~99Discount Rate € Unit Price 20% 30% 40%
Days to Ship Standard To be quoted
- PSCCN · SSCCN
EFor orders larger than indicated quantity, please request a quotation.
Price6
6
2 Days
2 Days
Part Number BSelectable
D1 d1 CSet ScrewM x Length
€ Unit PriceType D SCCJ PSCCJ SSCCJ
(Compact Type)
SCCJPSCCJSSCCJ
3
5
7
-
0.2
M3x3
4 85 116 128 1410 1612 19
0.5
13 2015 22
206
27M4x3
8 22.5
258
32 27.510
3010 39
32.5
1
M5x412 41 M6x5
3510 44
37.5M5x4
12 46 M6x5
4015 51
42.5M5x4
18 53 M6x5
Type M Material S Surface Treatment A Accessory
SCCJ 1.1191/C45EBlack Oxide Coating 2 Set Screws
PSCCJ Electroless Nickel Plating 2 Set Screws(JIS SUS)SSCCJ 1.4301/X5CrNi18-10 -
ECompactness Comparison Table
D
Size Differences Compact Standard (P.237)
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
3 -1 0 5 7 6 74 -1 0 5 8 6 85 -1 0 5 11 6 116 -1 0 5 12 6 128 -1 0 5 14 6 14
10 -1 0 5 16 6 1612 -1 -1 5 19 6 2013 -3 -2 5 20 8 2215 -3 -2 5 22 8 2420 -4 -5 6 27 10 3225 -4 -6 8 32 12 3830 -5 -7 10 39 15 4635 -5 -6 10 44 15 5040 -5 -9 15 51 20 60
(- For SCCA · SCCAW and SCCAB,* marked sizes are only available.- However, D18 is not available.- D50 - B20 is applicable to
SCCN and SSCCN only.)
Part Number BSelectable
D1 d1 CSet ScrewM x Length
€ Unit Price
Type DH7 SCC PSCC SSCC
(Wide Type)
SCCPSCCSSCC
E* 30°chamfering is not available for Wide Type D5 and D6.
(D1=*d1)
5+ 0.012
0
6 *8 14 *14
0.5
M4x4
66 8 15 *15
*1016
*16
8+ 0.015
0
813
1018
108
1610 20
12
+ 0.0180
8 22
2010 12 26 M5x5
13*8 22 M4x4
10 26M5x5
158 10 25
24*12 28
20
+ 0.0210
10 12 15 32 29M6x6
25 12 15 *18 42 38
3016 45
42
1M8x8*20 49
35+ 0.025
0
*20 59 4740 *20 *22 72 55
M10x1050 *25 79 65
B dimensions with* are applicable to SCC only. )
Up to 46% Up to 45%
Part Number BSelectable
D1 d1 CSet ScrewM x Length
€ Unit Price
Type D SCCN PSCCN SSCCN SCCA SCCAW SCCAB
(Standard Type)
SCCNPSCCNSSCCNSCCASCCAWSCCAB
3
+0.05+0.01
*6 8 7 4.5
0.2
M3x34 *6 8 8 5.55 *6 8 10 11 10
M4x36 *6 *8 *10 12 118 *6 *8 *10 14 1210 *6 *8 *10 16 1312 6 *8 *10 12 20 15
0.5
M5x4for B6M4x3
13 *8 10 12 22 1815 *8 *10 12 24 2016 8 *10 12 15 26 22 M6x5
for B8M5x4
18∙20 *10 12 *15 32 2725 *12 15 18 38 3130 *15 18 20 46 38
1M8x6
35 *15 18 20 50 4040 *20 22 60 45
M10x850 20 *22 25 70 55
QFeatures P.237: Smaller by up to 25% in width (B dimension) and 15% in outer diameter (D1 dimension) than the Standard Type.
SCCNS(P.256)
Bearing Housing
Bearings
Shaft
SCCJ
SCCJ15-5
Example
6.325
B/2
B
Dd
2–M30°
1
+_0.1
6.3
6.3
6.3
A
0.02 A
C
2–C
D+_ 0
.11
QFeatures- Replacing the Hexagon Socket Set Screws with Knurled Knobs enables
easy installation and removal of the Shaft Collar by hand.- Set Screws come with loose-prevention coating (*For details, see P.251).
* The knob that matches with dimension "B Selection" and dimension "M (Coarse) " is included.Ex. When a Knob is specifi ed for SCCN10-8, Knurled Knobs of B8 and M4 are included.
M Material: 1.4301/X5CrNi18-10
Part Number - B - (KB / WKB)
SCCN12 - 10 - KBAlterations
Alterations With Knurled Knob(Hand Tightening Type)
Code KB(1 pc.) / WKB(2 pcs.)
Spec. EA Set Screw is also included.
Order Code KB (or WKB)
E3≤D≤25E8≤B≤18
€ KB :B8 2,00 EUR/B10, 12 3,00 EUR/B15, 18 4,00 EURWKB :B8 2,00 EUR/B10, 12 3,00 EUR/B15, 18 4,00 EUR
BSelectable
M(Coarse Thread)
D L T
83
7.5 6
3
45 8
104
9.56
586
125 11.5 46 10
15 6 14.518 6 15.5 10 5
D T L
Parallel Knurling
M
Thread Locking Coating-Main Component: Nylon Resin-Operation Temperature Range: - 40~150°C
Knurled Knob Details
Attaches a knurled knob.
*For detailed dimensions, see the right-hand side.
6.325
2-C
2-C
6.3
+0.
05D
+0.
01
6.3
B/2B±0.1 6.30.02 A
A2-M
6.3 B/2
6.3
6.3
2-M C
2-C
A
0.02 A
30°
D1±
0.1
D1±
0.1
d1 +0.
05D
+0.
01
B±0.1
B≥8B=5, 6
-2391 -2401
Shaft Collars -Clamp-
-Standard Type-
Shaft Collars -Clamp-
-Compact Type-
SCS
QStandard Type QCompact Type25 6.3
6.3
A
0.02 A
1±
0.1
+0.
01+
0.05
±0.1
R
B/2
B
2xR
D D
M d
Y
W
XZ
6.3
6.3
2-C
2-C*
* *D3 ~D25 :C0.5D30~D60 :C1D80 · D100 :C1.5
6.325
dM WY
+0.0
5D
+0.0
1ZX
D1±
0.1
6.3
6.3
*2-C
*2-C
R
B/2
2xRB±0.1
A
0.02 A
6.3
*D5 ~D25: C0.5D30~D50: C1
QFeatures: Less shaft damage from tightening than the Set Screw Type (P.237). QFeatures: Smaller by up to 33% in width (B dimension) and 16% in outer diameter (D1 dimension) than the Standard Type (P.239).
Part Number - B
SCS10 - 10OrderExample
D P.87DaysDays
to Ship
CAD Data CAD Data
Part Number - B
PSCSJ5 - 6OrderExample
D P.87DaysDaysto Ship
QVolume Discount (ERound down to one Cent.) P.87- SCS · PSCS · SSCSQuantity 1~9 10~19 20~39 40~99
Discount Rate € Unit Price 20% 30% 40%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~9 10~19 20~39 40~99Discount Rate € Unit Price 20% 30% 40%Days to Ship Standard To be quoted
- SCSA · SCSAW
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 10% 15% 23%Days to Ship Standard To be quoted
- SCSAB
EFor orders larger than indicated quantity, please request a quotation.
Price
Up to 46%
6
6
Example
2 Days
EMaximum thrust loads obtained by tightening test are shown on P.236.
EThread Insert Type of EN AW-2017/AlCu4MgSi DP.255
TypeM
MaterialSSurface Treatment
A Accessory
SCS1.1191/C45E
Black Oxide CoatingHexagon Socket Head
Cap Screw 1 pc.
PSCSElectroless Nickel
Plating Hexagon Socket Head Cap Screw
1 pc.(JIS SUS)
SSCS1.4301/X5CrNi18-10 -
SCSA EN AW-2017/AlCu4MgSi
SCSAW Clear AnodizeSCSAB Black Anodize
Part Number BSelectable D1
M(Coarse Thread) d R W X Y Z
€ Unit PriceType D SCSA SCSAW SCSAB
(Standard Type)
SCSA
SCSAW
SCSAB
3 8 16
M3 3.4 31
4.5 2.2 34 8 18 5 3 3.55 8
205.5
45
6 8 6 6
88
25
1.5
7
5
710
10 10
30M4 4.5 3.75
9 812 10
109
13 1010
15 10 34 11.56
1610
35
M5 5.5 4.5
12 1112
20
10
40 147
1312
15
2512
45 17 1615
30 15 55M6 6.6 6
20 10 1835 15 60
223 12 21
40 18 70 M8 9 7 26 13 2350 22 85 M10 11 9 3 32 16 28
EMaximum thrust loads obtained by tightening test are shown on P.236.
Type M Material S Surface Treatment A Accessory
SCSJ 1.1191/C45EBlack Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCSJ Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCSJ 1.4301 -
Part NumberB D1
M(Coarse Thread)
d R W X Y Z€ Unit Price
Type D SCSJ PSCSJ SSCSJ
(Compact Type)
SCSJ
PSCSJ
SSCSJ
5
6
16
M2.6 2.9 2.45
15.5
3
6
6 18 6 6.5
8 22
1.5
7
91025
8
12 9
13
8
28
M3 3.4 3
111115
3016 11.5
20 35 135
13
25 10 42 M4 4.5 3.75 16.5 16.5
30
12
50
M5 5.5 4.5
20
6
20
35 552
22.5 21
40 60 25 23
50 18 80 M8 9 7 3 32 15 28
*1 B Dimension 20 is available for SCS only (When D18 is selected, this is not available.) *2 D Dimension 60 · 80 and 100 are available for SCS only. No slit machining on Z section.
Part Number BSelectable
D1M
(Coarse Thread)d R W X Y Z
€ Unit Price
Type D SCS PSCS SSCS
(Standard Type)
SCSPSCSSSCS
3 8 16M3 3.4 3
1
4.5 2.2 3~54 8 18 5 3 3.5~6
58 20 5.5
4
5~6.510 22 M4 4.5 3.75 6.5 6~7
68
20M3 3.4 3
6 6~6.510 M4 4.5 3.75
8
825
M3 3.4 3
1.5
8
5
7~910 M4 4.5 3.7512
30
M5 5.5 4.5
97~10
15 M6 6.6 6
10
8 M3 3.4 38~1010 M4 4.5 3.75
12 M5 5.5 4.5
1015 35 M6 6.6 6 6 8~12
12
8
30M3 3.4 3
5 9~1010 M4 4.5 3.7512 M5 5.5 4.515 35 M6 6.6 6 11 6 9~12
13
10 30 M4 4.5 3.75 105
1012 34 M5 5.5 4.5
11 10~1215 35 M6 6.6 6
615
10 34 M4 4.5 3.75 11.5 10~1112 35 M5 5.5 4.5 12
11~1315 40 M6 6.6 6 13 8
16
1035 M5 5.5 4.5 12 6 11~12
12
15
40M6 6.6 6 13 8 11~13
18 · 20
10M5 5.5 4.5 14 7 13
12
15
45M6 6.6 6
158 13~15
20*1 16
25
12 M5 5.5 4.5 17 7 1615 50
M6 6.6 618
10
16~1820
55 2016~20
3015 18~2020
60M8 9 7
2318~21
35 15 M6 6.6 62
12 2140 18 70 M8 9 7 26 13 2350 22 85
M10 11 9 332 16 28
60*2 22 95 37 18 -80*2 32 130
M16 18 13 550 22 -
100*2 36 150 60 26 -
D
Size Differences Compact Standard (P.237)
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
5 -2 -4 6 16 8 20
6 -2 -2 6 18 8 20
8 -2 -3 6 22 8 25
10 -2 -5 6 25 8 30
12 -2 -5 6 25 8 30
13 -2 -2 8 28 10 30
15 -2 -4 8 30 10 34
16 -2 -5 8 30 10 35
20 -2 -5 8 35 10 40
25 -2 -3 10 42 12 45
30 -3 -5 12 50 15 55
35 -3 -5 12 55 15 60
40 -6 -10 12 60 18 70
50 -4 -5 18 80 22 85
ECompactness Comparison Table
QVolume Discount (ERound down to one Cent.) P.87 - SCSJQuantity 1~29 30~39 40~49 50~99
Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
- PSCSJ · SSCSJ
EFor orders larger than indicated quantity, please request a quotation.
Price
-2391 -2401
Shaft Collars -Clamp-
-Standard Type-
Shaft Collars -Clamp-
-Compact Type-
SCS
QStandard Type QCompact Type25 6.3
6.3
A
0.02 A
1±
0.1
+0.
01+
0.05
±0.1
R
B/2
B
2xR
D D
M d
Y
W
XZ
6.3
6.3
2-C
2-C*
* *D3 ~D25 :C0.5D30~D60 :C1D80 · D100 :C1.5
6.325
dM WY
+0.0
5D
+0.0
1ZX
D1±
0.1
6.3
6.3
*2-C
*2-C
R
B/2
2xRB±0.1
A
0.02 A
6.3
*D5 ~D25: C0.5D30~D50: C1
QFeatures: Less shaft damage from tightening than the Set Screw Type (P.237). QFeatures: Smaller by up to 33% in width (B dimension) and 16% in outer diameter (D1 dimension) than the Standard Type (P.239).
Part Number - B
SCS10 - 10OrderExample
D P.87DaysDays
to Ship
CAD Data CAD Data
Part Number - B
PSCSJ5 - 6OrderExample
D P.87DaysDaysto Ship
QVolume Discount (ERound down to one Cent.) P.87- SCS · PSCS · SSCSQuantity 1~9 10~19 20~39 40~99
Discount Rate € Unit Price 20% 30% 40%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~9 10~19 20~39 40~99Discount Rate € Unit Price 20% 30% 40%Days to Ship Standard To be quoted
- SCSA · SCSAW
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 10% 15% 23%Days to Ship Standard To be quoted
- SCSAB
EFor orders larger than indicated quantity, please request a quotation.
Price
Up to 46%
6
6
Example
2 Days
EMaximum thrust loads obtained by tightening test are shown on P.236.
EThread Insert Type of EN AW-2017/AlCu4MgSi DP.255
TypeM
MaterialSSurface Treatment
A Accessory
SCS1.1191/C45E
Black Oxide CoatingHexagon Socket Head
Cap Screw 1 pc.
PSCSElectroless Nickel
Plating Hexagon Socket Head Cap Screw
1 pc.(JIS SUS)
SSCS1.4301/X5CrNi18-10 -
SCSA EN AW-2017/AlCu4MgSi
SCSAW Clear AnodizeSCSAB Black Anodize
Part Number BSelectable D1
M(Coarse Thread) d R W X Y Z
€ Unit PriceType D SCSA SCSAW SCSAB
(Standard Type)
SCSA
SCSAW
SCSAB
3 8 16
M3 3.4 31
4.5 2.2 34 8 18 5 3 3.55 8
205.5
45
6 8 6 6
88
25
1.5
7
5
710
10 10
30M4 4.5 3.75
9 812 10
109
13 1010
15 10 34 11.56
1610
35
M5 5.5 4.5
12 1112
20
10
40 147
1312
15
2512
45 17 1615
30 15 55M6 6.6 6
20 10 1835 15 60
223 12 21
40 18 70 M8 9 7 26 13 2350 22 85 M10 11 9 3 32 16 28
EMaximum thrust loads obtained by tightening test are shown on P.236.
Type M Material S Surface Treatment A Accessory
SCSJ 1.1191/C45EBlack Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCSJ Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCSJ 1.4301 -
Part NumberB D1
M(Coarse Thread)
d R W X Y Z€ Unit Price
Type D SCSJ PSCSJ SSCSJ
(Compact Type)
SCSJ
PSCSJ
SSCSJ
5
6
16
M2.6 2.9 2.45
15.5
3
6
6 18 6 6.5
8 22
1.5
7
91025
8
12 9
13
8
28
M3 3.4 3
111115
3016 11.5
20 35 135
13
25 10 42 M4 4.5 3.75 16.5 16.5
30
12
50
M5 5.5 4.5
20
6
20
35 552
22.5 21
40 60 25 23
50 18 80 M8 9 7 3 32 15 28
*1 B Dimension 20 is available for SCS only (When D18 is selected, this is not available.) *2 D Dimension 60 · 80 and 100 are available for SCS only. No slit machining on Z section.
Part Number BSelectable
D1M
(Coarse Thread)d R W X Y Z
€ Unit Price
Type D SCS PSCS SSCS
(Standard Type)
SCSPSCSSSCS
3 8 16M3 3.4 3
1
4.5 2.2 3~54 8 18 5 3 3.5~6
58 20 5.5
4
5~6.510 22 M4 4.5 3.75 6.5 6~7
68
20M3 3.4 3
6 6~6.510 M4 4.5 3.75
8
825
M3 3.4 3
1.5
8
5
7~910 M4 4.5 3.7512
30
M5 5.5 4.5
97~10
15 M6 6.6 6
10
8 M3 3.4 38~1010 M4 4.5 3.75
12 M5 5.5 4.5
1015 35 M6 6.6 6 6 8~12
12
8
30M3 3.4 3
5 9~1010 M4 4.5 3.7512 M5 5.5 4.515 35 M6 6.6 6 11 6 9~12
13
10 30 M4 4.5 3.75 105
1012 34 M5 5.5 4.5
11 10~1215 35 M6 6.6 6
615
10 34 M4 4.5 3.75 11.5 10~1112 35 M5 5.5 4.5 12
11~1315 40 M6 6.6 6 13 8
16
1035 M5 5.5 4.5 12 6 11~12
12
15
40M6 6.6 6 13 8 11~13
18 · 20
10M5 5.5 4.5 14 7 13
12
15
45M6 6.6 6
158 13~15
20*1 16
25
12 M5 5.5 4.5 17 7 1615 50
M6 6.6 618
10
16~1820
55 2016~20
3015 18~2020
60M8 9 7
2318~21
35 15 M6 6.6 62
12 2140 18 70 M8 9 7 26 13 2350 22 85
M10 11 9 332 16 28
60*2 22 95 37 18 -80*2 32 130
M16 18 13 550 22 -
100*2 36 150 60 26 -
D
Size Differences Compact Standard (P.237)
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
5 -2 -4 6 16 8 20
6 -2 -2 6 18 8 20
8 -2 -3 6 22 8 25
10 -2 -5 6 25 8 30
12 -2 -5 6 25 8 30
13 -2 -2 8 28 10 30
15 -2 -4 8 30 10 34
16 -2 -5 8 30 10 35
20 -2 -5 8 35 10 40
25 -2 -3 10 42 12 45
30 -3 -5 12 50 15 55
35 -3 -5 12 55 15 60
40 -6 -10 12 60 18 70
50 -4 -5 18 80 22 85
ECompactness Comparison Table
QVolume Discount (ERound down to one Cent.) P.87 - SCSJQuantity 1~29 30~39 40~49 50~99
Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
- PSCSJ · SSCSJ
EFor orders larger than indicated quantity, please request a quotation.
Price
-2411 -2421
Shaft Collars -Split-
-Standard Type-
Shaft Collars -Split-
-Compact Type / Balanced Type-
QStandard Type QCompact Type
QBalanced Type
QFeature: Suitable for rotating applications since the collars are weight balanced. Included hexagon socket head cap screws are coated with thread locking compound.
25 6.3
WY
+0
.05
D+
0.0
1XX
D1±
0.1
6.3
6.3
6.3
*2-C
*2-C
2-R
B/2
2xRB±0.1
2-M 2-d
*D5 ~D25:C0.5D30~D50:C1
X
Y
W2-M
2-d
X
25 6.3
+0.
05+
0.01 0 -0
.2D1
D
B±0.1
B/2
2xR2-C
2-C
R
6.3
6.3
6.3
*
*
*D16~D25:C0.5 D30~D50:C1
Part Number - B
SCSPJ10SCSPB17
--
612
Order
Example
Part Number - B
SCSP10SCNPA15
--
1510
Order
Example
D P.87DaysDays
to Ship
D P.87DaysDays
to Ship
CAD Data CAD Data
B/2
1D
±0.
1
±0.1
2-R
B2XR
D+
0.0
1+
0.0
5
6.3
6.3
6.3
2-C*
2-C*
WY
XX
2-d2-M
*D3 ~D25:C0.5D30~D60:C1D80 · D100:C1.5
25 6.3
QVolume Discount (ERound down to one Cent.) P.87- SCSP · PSCSP · SSCSP
Quantity 1~9 10~19 20~39 40~99Discount Rate € Unit Price 20% 30% 40%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
- SCNPA · SCNPAW
EFor orders larger than indicated quantity, please request a quotation.
Price
QVolume Discount (ERound down to one Cent.) P.87- Compact Type · SCSPBQuantity 1~29 30~39 40~49 50~99
Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
- PSCSPB · SSCSPB
EFor orders larger than indicated quantity, please request a quotation.
Price
QFeature: Post assembly collar installation makes maintenance easier compared to the Set Screw Type (P.237) and Clamp Type (P.239). QFeature: Smaller by up to 33% in width (B dimension) and 14% in outer diameter (D1 dimension) than Standard Type (P.241).
E Thread Insert Type of EN AW-2017/AlCu4MgSi W P.255EThe halves must remain in the same orientation as shipped when in use.
Type M Material S Surface Treatment A Accessory
SCSP1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 2 pcs.
PSCSP Electroless Nickel Plating
Hexagon Socket Head Cap Screw 2 pcs.
(JIS SUS)
SSCSP 1.4301/X5CrNi18-10 -
SCNPA EN AW-2017/AICu4MgSi
-
SCNPAW Clear Anodize
EX will be equal to 7 when SCNPA or SCNPAW is selected only.
Part Number BSelectable
D1
M(Coarse Thread)
d R W X Y
€ Unit Price
SCSP PSCSP SSCSP SCNPA SCNPAWType D
(Standard Type)
SCSPPSCSPSSCSP
SCNPA (* only)SCNPAW (* only)
3 *8 16M3 3.4 3
1
4.5 2.24 *8 18 5 3
5*8 20 5.5
410 22 M4 4.5 3.75 6.5
6*8
20M3 3.4 3
610 M4 4.5 3.75
8
*825
M3 3.4 3
1.5
8(7)E
5
10 M4 4.5 3.7512
30
M5 5.5 4.5
915 M6 6.6 6
10
8 M3 3.4 3*10 M4 4.5 3.7512 M5 5.5 4.5
1015 35 M6 6.6 6 6
12
8
30M3 3.4 3
5*10 M4 4.5 3.7512 M5 5.5 4.515 35 M6 6.6 6 11 6
13
*10 30 M4 4.5 3.75 105
12 34 M5 5.5 4.511
15 35 M6 6.6 66
15
*10 34 M4 4.5 3.75 11.512 35 M5 5.5 4.5 1215 40 M6 6.6 6 13 8
16
*1035 M5 5.5 4.5 12 6
12
15
40M6 6.6 6 13 8
18
10M5 5.5 4.5 14 7
12
15 45 M6 6.6 6 15 8
20
*1040 M5 5.5 4.5 14 7
12
1545
M6 6.6 6 15 8
25
*12 M5 5.5 4.5 17 715 50
M6 6.6 618
1020
55 2030
*15
2060
M8 9 723
35 *15 M6 6.6 62
1240 *18 70 M8 9 7 26 1350 *22 85
M10 11 9 332 16
60 22 95 37 1880 32 130
M16 18 13 550 22
100 36 150 60 26
EThe halves must remain in the same orientation as shipped when in use.
Type M Material S Surface Treatment A Accessory
SCSPJ1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 2 pcs.
PSCSPJ Electroless Nickel Plating Hexagon Socket Head Cap Screw 2 pcs.(JIS SUS)SSCSPJ 1.4301/X5CrNi18-10 -
Part NumberB D1
M(Coarse Thread)
d R W X Y€ Unit Price
Type D SCSPJ PSCSPJ SSCSPJ
(Compact Type)
SCSPJ
PSCSPJ
SSCSPJ
56
16
M2.6 2.9 2.45
15.5
3
6 18 68
6
22
1.5
710
258
12 913 8 28
M3 3.4 311
15
830
16 11.520 35 13
525 10 42 M4 4.5 3.75 16.530
12
50M5 5.5 4.5
20635 55
222.5
40 60 2550 18 80 M8 9 7 3 32 15
Type M Material S Surface Treatment A Accessory
SCSPB1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 2 pcs.
PSCSPB Electroless Nickel Plating Hexagon Socket Head Cap Screw 2 pcs.(JIS SUS)SSCSPB 1.4301/X5CrNi18-10 -
Part NumberB D1
M(Coarse Thread)
d R W X Y€ Unit Price
Type D SCSPB PSCSPB SSCSPB
(Balanced Type)
SCSPB
PSCSPB
SSCSPB
1610
35
M5 5.5 4.5
1.5
12 612
1710
40 14 712
20
10
12
1545
M6 6.6 6 15 8
2512 M5 5.5 4.5 17 715 50
M6 6.6 618
1030
15 55 2020
60M8 9 7
2335 15 M6 6.6 6
212
40 18 70 M8 9 7 26 1350 22 85 M10 11 9 3 32 16
SCSPB
QThread loosening prevention measures for Balanced Type- Threads are coated with special resin with superior elasticity as well as resistance to abrasion and oil.- Effect is maximum at the first use, and it will gradually decrease after the fourth use.
QComparison Table of Weight Differences
Part NumberB
Body weight (g) Weight with screws (g)
Type D Top Half Bottom Half Weight difference Top Half Bottom Half Weight difference
SCSP(Standard)
25 12 45 40 5 48 45 340 18 141 163 22 162 173 11
SCSPB(Balanced Type)
25 12 43 43 0 47 47 040 18 152 152 0 167 167 0
Example
DSize Differences Compact (P.242) Standard
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
5 -2 -4 6 16 8 206 -2 -2 6 18 8 208 -2 -3 6 22 8 25
10 -2 -5 6 25 8 3012 -2 -5 6 25 8 3013 -2 -2 8 28 10 3015 -2 -4 8 30 10 3416 -2 -5 8 30 10 3520 -2 -5 8 35 10 4025 -2 -3 10 42 12 4530 -3 -5 12 50 15 5535 -3 -5 12 55 15 6040 -6 -10 12 60 18 7050 -4 -5 18 80 22 85
ECompactness Comparison Table
Up to 46%
6
6
2 Days
-2411 -2421
Shaft Collars -Split-
-Standard Type-
Shaft Collars -Split-
-Compact Type / Balanced Type-
QStandard Type QCompact Type
QBalanced Type
QFeature: Suitable for rotating applications since the collars are weight balanced. Included hexagon socket head cap screws are coated with thread locking compound.
25 6.3
WY
+0
.05
D+
0.0
1XX
D1±
0.1
6.3
6.3
6.3
*2-C
*2-C
2-R
B/2
2xRB±0.1
2-M 2-d
*D5 ~D25:C0.5D30~D50:C1
X
Y
W2-M
2-d
X
25 6.3+
0.05
+0.
01 0 -0.2
D1
D
B±0.1
B/2
2xR2-C
2-C
R
6.3
6.3
6.3
*
*
*D16~D25:C0.5 D30~D50:C1
Part Number - B
SCSPJ10SCSPB17
--
612
Order
Example
Part Number - B
SCSP10SCNPA15
--
1510
Order
Example
D P.87DaysDays
to Ship
D P.87DaysDays
to Ship
CAD Data CAD Data
B/2
1D
±0.
1
±0.1
2-R
B2XR
D+
0.0
1+
0.0
5
6.3
6.3
6.3
2-C*
2-C*
WY
XX
2-d2-M
*D3 ~D25:C0.5D30~D60:C1D80 · D100:C1.5
25 6.3
QVolume Discount (ERound down to one Cent.) P.87- SCSP · PSCSP · SSCSP
Quantity 1~9 10~19 20~39 40~99Discount Rate € Unit Price 20% 30% 40%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
- SCNPA · SCNPAW
EFor orders larger than indicated quantity, please request a quotation.
Price
QVolume Discount (ERound down to one Cent.) P.87- Compact Type · SCSPBQuantity 1~29 30~39 40~49 50~99
Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
- PSCSPB · SSCSPB
EFor orders larger than indicated quantity, please request a quotation.
Price
QFeature: Post assembly collar installation makes maintenance easier compared to the Set Screw Type (P.237) and Clamp Type (P.239). QFeature: Smaller by up to 33% in width (B dimension) and 14% in outer diameter (D1 dimension) than Standard Type (P.241).
E Thread Insert Type of EN AW-2017/AlCu4MgSi W P.255EThe halves must remain in the same orientation as shipped when in use.
Type M Material S Surface Treatment A Accessory
SCSP1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 2 pcs.
PSCSP Electroless Nickel Plating
Hexagon Socket Head Cap Screw 2 pcs.
(JIS SUS)
SSCSP 1.4301/X5CrNi18-10 -
SCNPA EN AW-2017/AICu4MgSi
-
SCNPAW Clear Anodize
EX will be equal to 7 when SCNPA or SCNPAW is selected only.
Part Number BSelectable
D1
M(Coarse Thread)
d R W X Y
€ Unit Price
SCSP PSCSP SSCSP SCNPA SCNPAWType D
(Standard Type)
SCSPPSCSPSSCSP
SCNPA (* only)SCNPAW (* only)
3 *8 16M3 3.4 3
1
4.5 2.24 *8 18 5 3
5*8 20 5.5
410 22 M4 4.5 3.75 6.5
6*8
20M3 3.4 3
610 M4 4.5 3.75
8
*825
M3 3.4 3
1.5
8(7)E
5
10 M4 4.5 3.7512
30
M5 5.5 4.5
915 M6 6.6 6
10
8 M3 3.4 3*10 M4 4.5 3.7512 M5 5.5 4.5
1015 35 M6 6.6 6 6
12
8
30M3 3.4 3
5*10 M4 4.5 3.7512 M5 5.5 4.515 35 M6 6.6 6 11 6
13
*10 30 M4 4.5 3.75 105
12 34 M5 5.5 4.511
15 35 M6 6.6 66
15
*10 34 M4 4.5 3.75 11.512 35 M5 5.5 4.5 1215 40 M6 6.6 6 13 8
16
*1035 M5 5.5 4.5 12 6
12
15
40M6 6.6 6 13 8
18
10M5 5.5 4.5 14 7
12
15 45 M6 6.6 6 15 8
20
*1040 M5 5.5 4.5 14 7
12
1545
M6 6.6 6 15 8
25
*12 M5 5.5 4.5 17 715 50
M6 6.6 618
1020
55 2030
*15
2060
M8 9 723
35 *15 M6 6.6 62
1240 *18 70 M8 9 7 26 1350 *22 85
M10 11 9 332 16
60 22 95 37 1880 32 130
M16 18 13 550 22
100 36 150 60 26
EThe halves must remain in the same orientation as shipped when in use.
Type M Material S Surface Treatment A Accessory
SCSPJ1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 2 pcs.
PSCSPJ Electroless Nickel Plating Hexagon Socket Head Cap Screw 2 pcs.(JIS SUS)SSCSPJ 1.4301/X5CrNi18-10 -
Part NumberB D1
M(Coarse Thread)
d R W X Y€ Unit Price
Type D SCSPJ PSCSPJ SSCSPJ
(Compact Type)
SCSPJ
PSCSPJ
SSCSPJ
56
16
M2.6 2.9 2.45
15.5
3
6 18 68
6
22
1.5
710
258
12 913 8 28
M3 3.4 311
15
830
16 11.520 35 13
525 10 42 M4 4.5 3.75 16.530
12
50M5 5.5 4.5
20635 55
222.5
40 60 2550 18 80 M8 9 7 3 32 15
Type M Material S Surface Treatment A Accessory
SCSPB1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 2 pcs.
PSCSPB Electroless Nickel Plating Hexagon Socket Head Cap Screw 2 pcs.(JIS SUS)SSCSPB 1.4301/X5CrNi18-10 -
Part NumberB D1
M(Coarse Thread)
d R W X Y€ Unit Price
Type D SCSPB PSCSPB SSCSPB
(Balanced Type)
SCSPB
PSCSPB
SSCSPB
1610
35
M5 5.5 4.5
1.5
12 612
1710
40 14 712
20
10
12
1545
M6 6.6 6 15 8
2512 M5 5.5 4.5 17 715 50
M6 6.6 618
1030
15 55 2020
60M8 9 7
2335 15 M6 6.6 6
212
40 18 70 M8 9 7 26 1350 22 85 M10 11 9 3 32 16
SCSPB
QThread loosening prevention measures for Balanced Type- Threads are coated with special resin with superior elasticity as well as resistance to abrasion and oil.- Effect is maximum at the first use, and it will gradually decrease after the fourth use.
QComparison Table of Weight Differences
Part NumberB
Body weight (g) Weight with screws (g)
Type D Top Half Bottom Half Weight difference Top Half Bottom Half Weight difference
SCSP(Standard)
25 12 45 40 5 48 45 340 18 141 163 22 162 173 11
SCSPB(Balanced Type)
25 12 43 43 0 47 47 040 18 152 152 0 167 167 0
Example
DSize Differences Compact (P.242) Standard
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
5 -2 -4 6 16 8 206 -2 -2 6 18 8 208 -2 -3 6 22 8 25
10 -2 -5 6 25 8 3012 -2 -5 6 25 8 3013 -2 -2 8 28 10 3015 -2 -4 8 30 10 3416 -2 -5 8 30 10 3520 -2 -5 8 35 10 4025 -2 -3 10 42 12 4530 -3 -5 12 50 15 5535 -3 -5 12 55 15 6040 -6 -10 12 60 18 7050 -4 -5 18 80 22 85
ECompactness Comparison Table
Up to 46%
6
6
2 Days
Part NumberB D1 S P
Set ScrewM x Length
M1
(Coarse Thread)Type D(2-Hole Type)
SCTNPSCTNSSCTN
(2-Female Thread Type)
SCTWPSCTWSSCTW(4-Hole Type)
SCMNPSCMNSSCMN
(4-Female Thread Type)
SCMWPSCMWSSCMW
* marked sizes are not available with Female Thread Holes.
3 6 18 3.4 11 M3x3M34
5
1022
4.515
M4x468 24 16 M410 26 1812
12
325.5
22M5x5 M513 33 23
15 35 2516 40
6.6
28M6x6
M618 ∙ 20 44 32
25 49 3730 15 54 42 M8x835 59 47
*40 20 72 9 56 M10x10 -*50 25 86 11 68 -
E* marked sizes are not available with Female Thread Holes.
D€ Unit Price
SCTN PSCTN SSCTN SCMN PSCMN SSCMN SCTW PSCTW SSCTW SCMW PSCMW SSCMW345681012131516
18 · 20253035*40*50
TypeM
MaterialS Surface Treatment
AAccessory2-Hole
2-Female Thread
SCTN SCTW1.1191/C45E
Black Oxide Coating 2 Set ScrewsPSCTN PSCTW Electroless Nickel Plating 2 Set Screws
(JIS SUS)SSCTN SSCTW 1.4301/X5CrNi18-10 -
TypeM
MaterialS Surface Treatment
AAccessory4-Hole
4 Female Thread
SCMN SCMW1.1191/C45E
Black Oxide Coating 2 Set ScrewsPSCMN PSCMW Electroless Nickel Plating 2 Set Screws
(JIS SUS)SSCMN SSCMW 1.4301/X5CrNi18-10 -
Shaft Collars -Slit-
-2-Hole Counterbored Type / 3-Hole Counterbored Type-
Q2-Hole Counterbored Type
Q3-Hole Counterbored Type
D P.87Days- Except SCSGT - SCSGT
8 Days D P.88EA Express Charge of 5,40 EUR for 3 or more identical pieces.
Express A2,00 EUR/
pieceDaysto Ship
Part Number - B
SCSG10 - 10OrderExample
TypeM Material S Surface
Treatment A Accessory2-Hole 3-Hole
SCSG SCSGT1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCSG PSCSGT Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCSG SSCSGT 1.4301/X5CrNi18-10 -
E Due to no additional slitting on the opposite side of the screw, 3-Hole type has less gripping power. 2-Hole Type is recommended where more shaft gripping power is required
Part Number BSelectable
D1M
(Coarse Thread)d R W X Y Z P d1 d2 t
Type D
(2-Hole Type)
SCSG
PSCSG
SSCSG
(3-Hole Type)
SCSGT
PSCSGT
SSCSGT
6*8
24M3 3.4 3
18
4 6~8 153.5 6.5 3.3*10 M4 4.5 3.75
8*8 25 M3 3.4 3
1.5
5
7~9 17
*1028
M4 4.5 3.759 8~9 18 4.5 8 4.4
1033
1010~11 22 5.5 9.5 5.4
12 M5 5.5 4.5 1115 36 M6 6.6 6 13 6 11~12 23 6.6 11 6.5
12
*1035
M4 4.5 3.7511 5 10~12 24 5.5 9.5 5.4
*12 M5 5.5 4.515 38 M6 6.6 6 13 6 11~13 25 6.6 11 6.5
13
*10 33 M4 4.5 3.7511 5
10~11 23 4.5 8 4.412
36M5 5.5 4.5
11~1325
5.5 9.5 5.415 M6 6.6 6 126
15*12 38 M5 5.5 4.5
1327
15 40 M6 6.6 6 8 28 6.6 11 6.5
16
*10 36M5 5.5 4.5
126
11~12 26 4.5 8 4.4*12 38
1312~13 28 5.5 9.5 5.4
1542
M6 6.6 6 813~14
29 6.6 11 6.5
20
*12 M5 5.5 4.515
7 32 5.5 9.5 5.4*15
45 M6 6.6 6 8 14~15 33 6.6 11 6.520 16
25*12 48 M5 5.5 4.5 17 7 14~16 37 5.5 9.5 5.4
*15
50M6 6.6 6
1810
15~17 386.6 11 6.530 55 20 20 43
35 602
23 12 21 4840 *18 78 M8 9 7 28 13 26 60 9 14 8.650 22 88 M10 11 9 3 32 16 29 71 11 17.5 10.8
( Only * marked sizesare available for 3-Hole Type.
)
*D6 ~25:C0.5D30~50:C1
2-Hole Type 3-Hole Type
*D6 ~25:C0.5D30~50:C1
6.325
P
ZX
WY
M d
B/22-C *
d2 d1
D1±
0.1
R
B±0.1
t
6.3
6.36.3
2-C *
D+
0.05
+0.
01
P
P/2
X
WY
M d
B/2t2-C *
d2 d 1d 1
D1±
0.1
R
B±0.1
6.3
6.36.3
2-C *
D+
0.05
+0.
01
SSCSG
ExampleQVolume Discount (ERound down to one Cent.) P.87- SSCSGTQuantity 1~29 30~39 40~49 50~99
Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
- Other than SSCSGT
EFor orders larger than indicated quantity, please request a quotation.
Price
-2431 -2441
Shaft Collars -Set Screw Type-
-2-Hole Type / 2-Female Thread (Coarse) Type / 4-Hole Type / 4-Female Thread (Coarse) Type-
Q 2-Hole TypeQ 2-Female Thread Type
Q 4-Hole TypeQ 4-Female Thread Type
Part Number
SCTN12OrderExample
D P.87DaysDaysto Ship
DB
Selectable€ Unit Price
SCSG PSCSG SSCSG SCSGT PSCSGT SSCSGT
6*8
*10
8*8
*10
10 12
15
12
*10
*12
15
13
*10
12
15
15*12
15
16
*10
*12
15
20
*12
*15
20
25*12
*1530
35
40 *18
50 22
EOnly * marked sizes are available for 3-Hole Type.
*D3 ~D25:C0.5D30~D50:C1
25 6.3
P
90°
2-M
2-M1
B/2
B±0.1
2-C*
2-C*P
90°
2-M
2-S
D1±
0.1
D+
0.05
+0.
01
6.3
6.3
6.3
*D3 ~D25:C0.5D30~D50:C1
25 6.3
P
P
90°
2-M
4-M1
B/2
B±0.1
2-C*
2-C*P
90°
2-M
4-S
D1±
0.1
D+
0.05
+0.
01
6.3
6.3
6.3
P
CAD Data CAD Data
QVolume Discount (ERound down to one Cent.) P.87- SCTNQuantity 1~29 30~39 40~49 50~99
Discount Rate € Unit Price 10% 15% 23%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
- PSCTN · SSCTN · SCMN
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
- Others
EFor orders larger than indicated quantity, please request a quotation.
Price
6
6
2 Days
Part NumberB D1 S P
Set ScrewM x Length
M1
(Coarse Thread)Type D(2-Hole Type)
SCTNPSCTNSSCTN
(2-Female Thread Type)
SCTWPSCTWSSCTW(4-Hole Type)
SCMNPSCMNSSCMN
(4-Female Thread Type)
SCMWPSCMWSSCMW
* marked sizes are not available with Female Thread Holes.
3 6 18 3.4 11 M3x3M34
5
1022
4.515
M4x468 24 16 M410 26 1812
12
325.5
22M5x5 M513 33 23
15 35 2516 40
6.6
28M6x6
M618 ∙ 20 44 32
25 49 3730 15 54 42 M8x835 59 47
*40 20 72 9 56 M10x10 -*50 25 86 11 68 -
E* marked sizes are not available with Female Thread Holes.
D€ Unit Price
SCTN PSCTN SSCTN SCMN PSCMN SSCMN SCTW PSCTW SSCTW SCMW PSCMW SSCMW345681012131516
18 · 20253035*40*50
TypeM
MaterialS Surface Treatment
AAccessory2-Hole
2-Female Thread
SCTN SCTW1.1191/C45E
Black Oxide Coating 2 Set ScrewsPSCTN PSCTW Electroless Nickel Plating 2 Set Screws
(JIS SUS)SSCTN SSCTW 1.4301/X5CrNi18-10 -
TypeM
MaterialS Surface Treatment
AAccessory4-Hole
4 Female Thread
SCMN SCMW1.1191/C45E
Black Oxide Coating 2 Set ScrewsPSCMN PSCMW Electroless Nickel Plating 2 Set Screws
(JIS SUS)SSCMN SSCMW 1.4301/X5CrNi18-10 -
Shaft Collars -Slit-
-2-Hole Counterbored Type / 3-Hole Counterbored Type-
Q2-Hole Counterbored Type
Q3-Hole Counterbored Type
D P.87Days- Except SCSGT - SCSGT
8 Days D P.88EA Express Charge of 5,40 EUR for 3 or more identical pieces.
Express A2,00 EUR/
pieceDaysto Ship
Part Number - B
SCSG10 - 10OrderExample
TypeM Material S Surface
Treatment A Accessory2-Hole 3-Hole
SCSG SCSGT1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCSG PSCSGT Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCSG SSCSGT 1.4301/X5CrNi18-10 -
E Due to no additional slitting on the opposite side of the screw, 3-Hole type has less gripping power. 2-Hole Type is recommended where more shaft gripping power is required
Part Number BSelectable
D1M
(Coarse Thread)d R W X Y Z P d1 d2 t
Type D
(2-Hole Type)
SCSG
PSCSG
SSCSG
(3-Hole Type)
SCSGT
PSCSGT
SSCSGT
6*8
24M3 3.4 3
18
4 6~8 153.5 6.5 3.3*10 M4 4.5 3.75
8*8 25 M3 3.4 3
1.5
5
7~9 17
*1028
M4 4.5 3.759 8~9 18 4.5 8 4.4
1033
1010~11 22 5.5 9.5 5.4
12 M5 5.5 4.5 1115 36 M6 6.6 6 13 6 11~12 23 6.6 11 6.5
12
*1035
M4 4.5 3.7511 5 10~12 24 5.5 9.5 5.4
*12 M5 5.5 4.515 38 M6 6.6 6 13 6 11~13 25 6.6 11 6.5
13
*10 33 M4 4.5 3.7511 5
10~11 23 4.5 8 4.412
36M5 5.5 4.5
11~1325
5.5 9.5 5.415 M6 6.6 6 126
15*12 38 M5 5.5 4.5
1327
15 40 M6 6.6 6 8 28 6.6 11 6.5
16
*10 36M5 5.5 4.5
126
11~12 26 4.5 8 4.4*12 38
1312~13 28 5.5 9.5 5.4
1542
M6 6.6 6 813~14
29 6.6 11 6.5
20
*12 M5 5.5 4.515
7 32 5.5 9.5 5.4*15
45 M6 6.6 6 8 14~15 33 6.6 11 6.520 16
25*12 48 M5 5.5 4.5 17 7 14~16 37 5.5 9.5 5.4
*15
50M6 6.6 6
1810
15~17 386.6 11 6.530 55 20 20 43
35 602
23 12 21 4840 *18 78 M8 9 7 28 13 26 60 9 14 8.650 22 88 M10 11 9 3 32 16 29 71 11 17.5 10.8
( Only * marked sizesare available for 3-Hole Type.
)
*D6 ~25:C0.5D30~50:C1
2-Hole Type 3-Hole Type
*D6 ~25:C0.5D30~50:C1
6.325
P
ZX
WY
M d
B/22-C *
d2 d1
D1±
0.1
R
B±0.1
t
6.3
6.36.3
2-C *
D+
0.05
+0.
01
P
P/2
X
WY
M d
B/2t2-C *
d2 d 1d 1
D1±
0.1
R
B±0.1
6.3
6.36.3
2-C *
D+
0.05
+0.
01
SSCSG
ExampleQVolume Discount (ERound down to one Cent.) P.87- SSCSGTQuantity 1~29 30~39 40~49 50~99
Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
- Other than SSCSGT
EFor orders larger than indicated quantity, please request a quotation.
Price
-2431 -2441
Shaft Collars -Set Screw Type-
-2-Hole Type / 2-Female Thread (Coarse) Type / 4-Hole Type / 4-Female Thread (Coarse) Type-
Q 2-Hole TypeQ 2-Female Thread Type
Q 4-Hole TypeQ 4-Female Thread Type
Part Number
SCTN12OrderExample
D P.87DaysDaysto Ship
DB
Selectable€ Unit Price
SCSG PSCSG SSCSG SCSGT PSCSGT SSCSGT
6*8
*10
8*8
*10
10 12
15
12
*10
*12
15
13
*10
12
15
15*12
15
16
*10
*12
15
20
*12
*15
20
25*12
*1530
35
40 *18
50 22
EOnly * marked sizes are available for 3-Hole Type.
*D3 ~D25:C0.5D30~D50:C1
25 6.3
P
90°
2-M
2-M1
B/2
B±0.1
2-C*
2-C*P
90°
2-M
2-S
D1±
0.1
D+
0.05
+0.
01
6.3
6.3
6.3
*D3 ~D25:C0.5D30~D50:C1
25 6.3
P
P
90°
2-M
4-M1
B/2
B±0.1
2-C*
2-C*P
90°
2-M
4-S
D1±
0.1
D+
0.05
+0.
01
6.3
6.3
6.3
P
CAD Data CAD Data
QVolume Discount (ERound down to one Cent.) P.87- SCTNQuantity 1~29 30~39 40~49 50~99
Discount Rate € Unit Price 10% 15% 23%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
- PSCTN · SSCTN · SCMN
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
- Others
EFor orders larger than indicated quantity, please request a quotation.
Price
6
6
2 Days
-2451 -2461
Q 2-Hole Type
Q 2-Female Thread (Coarse) Type
Q 3-Hole Type
Q 3-Female Thread (Coarse) Type
Shaft Collars -Clamp-
-2-Hole Type / 2-Female Thread (Coarse) Type-
Shaft Collars -Clamp-
-3-Hole Type / 3-Female Thread (Coarse) Type-
25 6.3
R
M d
X
YW
Z
+0.
01+
0.05
D
2xR±0.1B
6.3
6.3
A
6.3
2-S
P
A0.02
1±
0.1
D
2-C*
2-C*
B/2
6.3
A
0.02 A
1±
0.1
+0.
01+
0.05
±0.1
R
B/2
B
2xR
D D6.3
6.3
2-C
2-C*
*
M d
Y
P
W
XZ
2-M1
2-Hole Type2-Female Thread (Coarse) Type
*D6 ~D25:C0.5D30~D50:C1
25 6.3
1±
0.1
+0.
01+
0.05
±0.1
R
B
2xR
D D
6.3
6.3
A0.02
6.3
A
2-C*
2-C*
B/2
3-S
M dYW
XP/
2
P
1±
0.1
+0.
01+
0.05
±0.1
R
B
2xR
D D
6.3
6.3
A0.02
6.3
A
2-C*
2-C*
B/2
3-M1
M d
Y
W
XP/
2
P3-Hole Type 3-Female Thread (Coarse) Type
*D6 ~D25:C0.5D30~D50:C1
D P.87DaysDays
to Ship
Part Number - B
SCSM10-
10
Order
Example D P.87DaysDays to Ship
Part Number - B
SCST10-
10
Order Example
Screw (1)
Screw (2)
ETips on AssemblyWhen using collars as shown in the diagram on the right, clamping the shaft with the screw (1) after the collar is fully tightened to the plate with the screws (2) is not possible.
EThe type shown on P.247 that can be fully mounted first with the screws (2) is recommended.
D P.247
Example
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Price
CAD Data CAD Data
QVolume Discount (ERound down to one Cent.) P.87- Except Those Shown Below
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%
Days to Ship Standard
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%
Days to Ship Standard To be quoted
- SSCSM · SSCSW
EFor orders larger than indicated quantity, please request a quotation.
Price
6
62 Days
2 Days
Type M Material
S Surface Treatment
A Accessory2-Hole 2-Female Thread
SCSM SCSW1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCSM PSCSW Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCSM SSCSW 1.4301/X5CrNi18-10 -
Part Number BSelectable
D1M
(Coarse Thread)d R W X Y Z S P
M1
(Coarse Thread)€ Unit Price
Type D SCSM PSCSM SSCSM SCSW PSCSW SSCSW
(2-Hole Type)
SCSM
PSCSM
SSCSM
(2-Female Thread
Type)
SCSW
PSCSW
SSCSW- Only * marked
sizes are available for 2-Female Thread Type.
- D18 is available for 2-Female Thread Type only.
6* 8
20M3 3.4 3
1 6 4 6~6.53.5
12M3*10 M4 4.5 3.75 13
8
* 825
M3 3.4 3
1.5
8
5
7~914
*10 M4 4.5 3.75 4.518
M4*12
30
M5 5.5 4.5
97~10
5.5
M515 M6 6.6 6
20
-
10
* 8 M3 3.4 38~10 M5*10 M4 4.5 3.75
*12 M5 5.5 4.5
1015 35 M6 6.6 6 6 8~12 6.6 24 -
12
* 830
M3 3.4 35 9~10 5.5 22 M5*10 M4 4.5 3.75
*12 M5 5.5 4.5*15 35 M6 6.6 6 11 6 9~12 6.6 24 M6
13
*10 30 M4 4.5 3.75 105
10 4.5 22 M4*12 34 M5 5.5 4.5
11 10~12 5.523 M5
15 35 M6 6.6 66
24 -
15
*10 34 M4 4.5 3.75 11.5 10~11 4.5 23 M4*12 35 M5 5.5 4.5 12
11~135.5 26 M5
*15 40 M6 6.6 6 13 8 6.6 28 M6
16
*1035 M5 5.5 4.5 12 6 11~12
4.5 24 M4*12 5.5 26 M5*15
40M6 6.6 6 13 8 11~13 6.6
28M6
18∙20
*10M5 5.5 4.5 14 7 13
4.5 M4*12 5.5 30 M5*15
45M6 6.6 6
15
8 13~15 6.6 34
M620
16 -25
30
25
*12 M5 5.5 4.5 17 7 16 5.5 36 M5*15 50
M6 6.6 6
18
10
16~18
6.6
38 M620
55 2016~20 40 -25
30
30
*15 18~20 44 M620
60
M8 9 7
23
18~21 9 45
-
25
30
35
15
M6 6.6 62
12 21 6.6 4820
25
30
4018
70 M8 9 7 26 13 23 9 5630
5022
85 M10 11 9 3 32 16 28 11 6830
Type M Material
S Surface Treatment
A Accessory3-Hole 3-Female Thread
SCST SCSTR1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCST PSCSTR Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCST SSCSTR 1.4301/X5CrNi18-10 -
E Due to no additional slitting on the opposite side of the screw, 3-Hole / 3-Female Thread type has less gripping power compared to 2-Hole / 2-Female Thread Type.E 2-Hole / 2-Female Thread Type are recommended where more shaft gripping power is required.
Part Number BSelectable
D1M
(Coarse Thread)d R W X Y S P
M1
(Coarse Thread)€ Unit Price
Type D SCST PSCST SSCST SCSTR PSCSTR SSCSTR
(3-Hole Type)
SCST
PSCST
SSCST
(3-Female Thread Type)
SCSTR
PSCSTR
SSCSTR- Only * marked sizes
are available for 3-Female Thread Type.
6* 8
20M3 3.4 3
1 6 43.5
12
M3*10 M4 4.5 3.75 13
8
* 825
M3 3.4 3
1.5
8
5
14
*10 M4 4.5 3.75 4.518
M4
12
30
M5 5.5 4.5
95.5
-15 M6 6.6 6
20
10
* 8 M3 3.4 3M5
*10 M4 4.5 3.75
12 M5 5.5 4.5
10
-15 35 M6 6.6 6 6 6.6 24
12
8
30
M3 3.4 3
5 5.5 22*10 M4 4.5 3.75M5
*12 M5 5.5 4.5
15 35 M6 6.6 6 11 6 6.6 24 -
13
*10 30 M4 4.5 3.75 105
4.5 22 M4
12 34 M5 5.5 4.511 5.5
23-
15 35 M6 6.6 6
6
24
15
*10 34 M4 4.5 3.75 11.5 4.5 23 M4
*12 35 M5 5.5 4.5 12 5.5 26 M5
*15 40 M6 6.6 6 13 8 6.6 28 M6
16
1035 M5 5.5 4.5 12 6
4.5 24 -
*12 5.5 26 M5
*15
40
M6 6.6 6 13 8 6.628
M6
20
*10M5 5.5 4.5 14 7
4.5 M4
*12 5.5 30 M5
*15 45 M6 6.6 6 15 8 6.6 34 M6
25*12 45 M5 5.5 4.5 17 7 5.5 36 M5
*15 50
M6 6.6 6
18 10
6.6
38
M630 *15 55 20 10 44
35 *15 602
23 12 48
40 *18 70 M8 9 7 26 13 9 56 M8
50 22 85 M10 11 9 3 32 16 11 68 -
( )( )
-2451 -2461
Q 2-Hole Type
Q 2-Female Thread (Coarse) Type
Q 3-Hole Type
Q 3-Female Thread (Coarse) Type
Shaft Collars -Clamp-
-2-Hole Type / 2-Female Thread (Coarse) Type-
Shaft Collars -Clamp-
-3-Hole Type / 3-Female Thread (Coarse) Type-
25 6.3
R
M d
X
YW
Z
+0.
01+
0.05
D
2xR±0.1B
6.3
6.3
A
6.3
2-S
P
A0.02
1±
0.1
D
2-C*
2-C*
B/2
6.3
A
0.02 A
1±
0.1
+0.
01+
0.05
±0.1
R
B/2
B
2xR
D D6.3
6.3
2-C
2-C*
*
M d
Y
P
W
XZ
2-M1
2-Hole Type2-Female Thread (Coarse) Type
*D6 ~D25:C0.5D30~D50:C1
25 6.3
1±
0.1
+0.
01+
0.05
±0.1
R
B
2xR
D D
6.3
6.3
A0.02
6.3
A
2-C*
2-C*
B/2
3-S
M dYW
XP/
2
P
1±
0.1
+0.
01+
0.05
±0.1
R
B
2xR
D D
6.3
6.3
A0.02
6.3
A
2-C*
2-C*
B/2
3-M1
M d
Y
W
XP/
2
P3-Hole Type 3-Female Thread (Coarse) Type
*D6 ~D25:C0.5D30~D50:C1
D P.87DaysDays
to Ship
Part Number - B
SCSM10-
10
Order
Example D P.87DaysDays to Ship
Part Number - B
SCST10-
10
Order Example
Screw (1)
Screw (2)
ETips on AssemblyWhen using collars as shown in the diagram on the right, clamping the shaft with the screw (1) after the collar is fully tightened to the plate with the screws (2) is not possible.
EThe type shown on P.247 that can be fully mounted first with the screws (2) is recommended.
D P.247
Example
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Price
CAD Data CAD Data
QVolume Discount (ERound down to one Cent.) P.87- Except Those Shown Below
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%
Days to Ship Standard
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%
Days to Ship Standard To be quoted
- SSCSM · SSCSW
EFor orders larger than indicated quantity, please request a quotation.
Price
6
62 Days
2 Days
Type M Material
S Surface Treatment
A Accessory2-Hole 2-Female Thread
SCSM SCSW1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCSM PSCSW Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCSM SSCSW 1.4301/X5CrNi18-10 -
Part Number BSelectable
D1M
(Coarse Thread)d R W X Y Z S P
M1
(Coarse Thread)€ Unit Price
Type D SCSM PSCSM SSCSM SCSW PSCSW SSCSW
(2-Hole Type)
SCSM
PSCSM
SSCSM
(2-Female Thread
Type)
SCSW
PSCSW
SSCSW- Only * marked
sizes are available for 2-Female Thread Type.
- D18 is available for 2-Female Thread Type only.
6* 8
20M3 3.4 3
1 6 4 6~6.53.5
12M3*10 M4 4.5 3.75 13
8
* 825
M3 3.4 3
1.5
8
5
7~914
*10 M4 4.5 3.75 4.518
M4*12
30
M5 5.5 4.5
97~10
5.5
M515 M6 6.6 6
20
-
10
* 8 M3 3.4 38~10 M5*10 M4 4.5 3.75
*12 M5 5.5 4.5
1015 35 M6 6.6 6 6 8~12 6.6 24 -
12
* 830
M3 3.4 35 9~10 5.5 22 M5*10 M4 4.5 3.75
*12 M5 5.5 4.5*15 35 M6 6.6 6 11 6 9~12 6.6 24 M6
13
*10 30 M4 4.5 3.75 105
10 4.5 22 M4*12 34 M5 5.5 4.5
11 10~12 5.523 M5
15 35 M6 6.6 66
24 -
15
*10 34 M4 4.5 3.75 11.5 10~11 4.5 23 M4*12 35 M5 5.5 4.5 12
11~135.5 26 M5
*15 40 M6 6.6 6 13 8 6.6 28 M6
16
*1035 M5 5.5 4.5 12 6 11~12
4.5 24 M4*12 5.5 26 M5*15
40M6 6.6 6 13 8 11~13 6.6
28M6
18∙20
*10M5 5.5 4.5 14 7 13
4.5 M4*12 5.5 30 M5*15
45M6 6.6 6
15
8 13~15 6.6 34
M620
16 -25
30
25
*12 M5 5.5 4.5 17 7 16 5.5 36 M5*15 50
M6 6.6 6
18
10
16~18
6.6
38 M620
55 2016~20 40 -25
30
30
*15 18~20 44 M620
60
M8 9 7
23
18~21 9 45
-
25
30
35
15
M6 6.6 62
12 21 6.6 4820
25
30
4018
70 M8 9 7 26 13 23 9 5630
5022
85 M10 11 9 3 32 16 28 11 6830
Type M Material
S Surface Treatment
A Accessory3-Hole 3-Female Thread
SCST SCSTR1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCST PSCSTR Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCST SSCSTR 1.4301/X5CrNi18-10 -
E Due to no additional slitting on the opposite side of the screw, 3-Hole / 3-Female Thread type has less gripping power compared to 2-Hole / 2-Female Thread Type.E 2-Hole / 2-Female Thread Type are recommended where more shaft gripping power is required.
Part Number BSelectable
D1M
(Coarse Thread)d R W X Y S P
M1
(Coarse Thread)€ Unit Price
Type D SCST PSCST SSCST SCSTR PSCSTR SSCSTR
(3-Hole Type)
SCST
PSCST
SSCST
(3-Female Thread Type)
SCSTR
PSCSTR
SSCSTR- Only * marked sizes
are available for 3-Female Thread Type.
6* 8
20M3 3.4 3
1 6 43.5
12
M3*10 M4 4.5 3.75 13
8
* 825
M3 3.4 3
1.5
8
5
14
*10 M4 4.5 3.75 4.518
M4
12
30
M5 5.5 4.5
95.5
-15 M6 6.6 6
20
10
* 8 M3 3.4 3M5
*10 M4 4.5 3.75
12 M5 5.5 4.5
10
-15 35 M6 6.6 6 6 6.6 24
12
8
30
M3 3.4 3
5 5.5 22*10 M4 4.5 3.75M5
*12 M5 5.5 4.5
15 35 M6 6.6 6 11 6 6.6 24 -
13
*10 30 M4 4.5 3.75 105
4.5 22 M4
12 34 M5 5.5 4.511 5.5
23-
15 35 M6 6.6 6
6
24
15
*10 34 M4 4.5 3.75 11.5 4.5 23 M4
*12 35 M5 5.5 4.5 12 5.5 26 M5
*15 40 M6 6.6 6 13 8 6.6 28 M6
16
1035 M5 5.5 4.5 12 6
4.5 24 -
*12 5.5 26 M5
*15
40
M6 6.6 6 13 8 6.628
M6
20
*10M5 5.5 4.5 14 7
4.5 M4
*12 5.5 30 M5
*15 45 M6 6.6 6 15 8 6.6 34 M6
25*12 45 M5 5.5 4.5 17 7 5.5 36 M5
*15 50
M6 6.6 6
18 10
6.6
38
M630 *15 55 20 10 44
35 *15 602
23 12 48
40 *18 70 M8 9 7 26 13 9 56 M8
50 22 85 M10 11 9 3 32 16 11 68 -
( )( )
-2471 -2481
Shaft Collars -Split-
-2-Hole Type / 2-Female Thread (Coarse) Type-
Shaft Collars -Wedge-
-2-Hole Type / 2-Female Thread (Coarse) Type / 3-Hole Type / 3-Female Thread (Coarse) Type-
Q 2-Hole TypeQ 2-Female Thread
(Coarse) Type
Q 2-Hole TypeQ 2-Female Thread
(Coarse) Type
Q 3-Hole TypeQ 3-Female Thread (Coarse)
Type
QFeature: Less power is required for tightening comparing to the conventional Clamp Types. No constraints on tightening sequence.
P1
WY
XX
2-d2-M
2-M1
P2
WY
XX
2-d2-M
2-N
B/2
1D
±0.
1
±0.1
2-R
B2XR
D+
0.0
1+
0.0
5
6.3
6.3
6.3
2-C*
2-C*
25 6.3
*D6 ~D25:C0.5D30~D50:C1
2-Hole Type 2-Female Thread (Coarse) Type
D P.87DaysDays to Ship
SCSPT
SSTN (P.1823)
ExamplePart Number - B
SCSPK10 - 10Order Example
CAD Data
D P.87DaysDays to Ship
Part Number
SCWM16PSCWR35
Order Example
E Maximum thrust loads obtained by tightening test are shown on P.236
*D10~D25:C0.5D30~D50:C1
X X
MY
2xR
P PB/2 B/2
R
MY
2-S 2-M1
2-C
2-C 2-CR
2-C
B±0.1 0.02 A 0.02 A
6.3
6.3
6.3 2xR
B±0.1
6.3 6.3A
DH7
D 1±
0.1
6.3
A
DH7
D 1±
0.1
2-Female Thread (Coarse) Type2-Hole Type 25 6.3
*D10~D25:C0.5D30~D50:C1
E Maximum thrust loads obtained by tightening test are shown on P.236
3-Hole Type
XP/
2
XP/
2
Y
P PB/2 B/2
MY
M
R
2-C
R
2-C
3-S 3-M1
2xR
B±0.1 0.02 A
6.3 6.3 2xR
B±0.1 0.02 A
6.3 6.3
6.3 DH7
D 1±
0.1
6.3 DH7
D 1±
0.12-C 2-C
A A
3-Female Thread (Coarse) Type25 6.3
QVolume Discount Rate (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49Discount Rate Unit Price 5% 10%
Days to Ship Standard To be quotedE For orders larger than indicated quantity, please request a quotation.
Price
CAD Data
QVolume Discount Rate (ERound down to one Cent.) P.87- SSCSPK
Quantity 1~29 30~39 40~49 50~99Discount Rate Unit Price 5% 10% 15%
Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Price - Other than SSCSPK
Quantity 1~29 30~39 40~49 50~99Discount Rate Unit Price 5% 10% 15%
Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
QFeature: Compared to the Set Screw Type and Clamp Type, post assembly install and remove is possible, making for easy maintenance.P.243 · P.244
6
6
Type M Material
S Surface Treatment
A Accessory2-Hole 2-Female Thread
SCSPK SCSPT1.1191/C45E
Blackening Coating Hexagon Socket Head Cap Screw 2 pcs.
PSCSPK PSCSPT Electroless Nickel Plating Hexagon Socket Head Cap Screw 2 pcs.(JIS SUS)SSCSPK SSCSPT 1.4301/X5CrNi18-10 -
Type Shaft Collar WedgeA
Accessory2-Hole2-Female Thread
M Material
S Surface Treatment
M Material
SCWM SCWW1.1191/C45E
Blackening Coating1.4301/
X5CrNi18-10
Hexagon Socket Head Cap Screw 1 pc.
PSCWM PSCWW Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCWM SSCWW 1.4301/X5CrNi18-10 -
Type Shaft Collar WedgeA
Accessory3-Hole3-Female Thread
M Material
S Surface Treatment
M Material
SCWT SCWR1.1191/C45E
Blackening Coating1.4301/
X5CrNi18-10
Hexagon Socket Head Cap Screw 1 pc.
PSCWT PSCWR Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCWT SSCWR 1.4301/X5CrNi18-10 -
E The halves must remain in the same orientation as shipped when in use.EPrices in ( ) are for 2-Hole Type only.
Part Number B
SelectableD1
M
(Coarse
Thread)
d R W X Y
2-Hole Type 2-Female Thread Type € Unit Price
NThrough Hole
P2
M1
(Coarse Thread)
P1SCSPTSCSPK
PSCSPTPSCSPK
SSCSPTSSCSPKType D
(2-Hole Type)
SCSPK
PSCSPK
SSCSPK
(2-Female Thread Type)
SCSPT
PSCSPT
SSCSPT
68
20M3 3.4 3
1 6 4 3.5 13
- -
10 M4 4.5 3.75
8
825
M3 3.4 3
1.5
8
5
4.5
16.510 M4 4.5 3.75
12
30
M5 5.5 4.5
9
1915 M6 6.6 6
10
8 M3 3.4 3
5.5
20
M4
2010 M4 4.5 3.75
12 M5 5.5 4.5
10
15 35 M6 6.6 6 6 22.5
12
8
30
M3 3.4 3
5 2122
10 M4 4.5 3.75
12 M5 5.5 4.5
15 35 M6 6.6 6 11 6 23.5
13
10 30 M4 4.5 3.75 105
21.5
2412 34 M5 5.5 4.511
23.5
15 35 M6 6.6 6
6
24
15
10 34 M4 4.5 3.75 11.5 24.5
2512 35 M5 5.5 4.5 12 25
15 40 M6 6.6 6 13 8 27.5
16
1035 M5 5.5 4.5 12 6 25.5
2812
15
40
M6 6.6 6 13 8 28
18
10M5 5.5 4.5 14 7 29
M5
30
12
15 45 M6 6.6 6 15 8 31.5
20
1040 M5 5.5 4.5 14 7 30
12
1545
M6 6.6 6 15 8 32.5
25
12 M5 5.5 4.5 17 7
6.6
35
3515 50
M6 6.6 6
18
10
37.5
2055 20
40
3015 42.5
M642
2060
M8 9 723
45
35 15 M6 6.6 62
12 47.5 47
40 18 70 M8 9 7 26 13 9 55M8
56
50 22 85 M10 11 9 3 32 16 11 67.5 66
EC (O.D./I.D. Chamfers) will be 1.0 for D30 or more.
Part NumberD1 B P X Y S M M1 R
€ Unit PriceType D SCWM PSCWM SSCWM SCWW PSCWW SSCWW
(2-Hole Type)
SCWMPSCWMSSCWM
(2-Female Thread Type)
SCWWPSCWWSSCWW
10 2510
18 8.5 3.54.5 4 4 412 28 20 9.5 5
15 30 23 11 4.516 34
12
25 11.5 6
5.5 5 5 4.520 38 29 13.5 725 44 34 16 930 48 39 18.5 835 56
1546 22 9.5 6.6 5 -
4.540 68 54 24.5 189 5 -
50 78 64 29.5 19
EC (O.D./I.D. Chamfers) will be 1.0 for D30 or more.
Part NumberD1 B P X Y S M M1 R
€ Unit PriceType D SCWT PSCWT SSCWT SCWR PSCWR SSCWR
(3-Hole Type)
SCWTPSCWTSSCWT
(3-Female Thread Type)
SCWRPSCWRSSCWR
10 2510
18 8.5 3.54.5 4 4 412 28 20 9.5 5
15 30 23 11 4.516 34
12
25 11.5 6
5.5 5 5 4.520 38 29 13.5 725 44 34 16 930 48 39 18.5 835 56
1546 22 9.5 6.6 5 6
4.540 68 54 24.5 189 5
850 78 64 29.5 19 -
E When using the Wedge Type as show in the diagram on the right, the collar can be fully tightened to the plate first with the screws (1), the shaft can then be clamped using the screw (2).
Screw (1)
Screw (2)
Example
-2471 -2481
Shaft Collars -Split-
-2-Hole Type / 2-Female Thread (Coarse) Type-
Shaft Collars -Wedge-
-2-Hole Type / 2-Female Thread (Coarse) Type / 3-Hole Type / 3-Female Thread (Coarse) Type-
Q 2-Hole TypeQ 2-Female Thread
(Coarse) Type
Q 2-Hole TypeQ 2-Female Thread
(Coarse) Type
Q 3-Hole TypeQ 3-Female Thread (Coarse)
Type
QFeature: Less power is required for tightening comparing to the conventional Clamp Types. No constraints on tightening sequence.
P1
WY
XX
2-d2-M
2-M1
P2
WY
XX
2-d2-M
2-N
B/2
1D
±0.
1
±0.1
2-R
B2XR
D+
0.0
1+
0.0
5
6.3
6.3
6.3
2-C*
2-C*
25 6.3
*D6 ~D25:C0.5D30~D50:C1
2-Hole Type 2-Female Thread (Coarse) Type
D P.87DaysDays to Ship
SCSPT
SSTN (P.1823)
ExamplePart Number - B
SCSPK10 - 10Order Example
CAD Data
D P.87DaysDays to Ship
Part Number
SCWM16PSCWR35
Order Example
E Maximum thrust loads obtained by tightening test are shown on P.236
*D10~D25:C0.5D30~D50:C1
X X
MY
2xR
P PB/2 B/2
R
MY
2-S 2-M1
2-C
2-C 2-CR
2-C
B±0.1 0.02 A 0.02 A
6.3
6.3
6.3 2xR
B±0.1
6.3 6.3A
DH7
D 1±
0.1
6.3
A
DH7
D 1±
0.1
2-Female Thread (Coarse) Type2-Hole Type 25 6.3
*D10~D25:C0.5D30~D50:C1
E Maximum thrust loads obtained by tightening test are shown on P.236
3-Hole Type
XP/
2
XP/
2
Y
P PB/2 B/2
MY
M
R
2-C
R
2-C
3-S 3-M1
2xR
B±0.1 0.02 A
6.3 6.3 2xR
B±0.1 0.02 A
6.3 6.3
6.3 DH7
D 1±
0.1
6.3 DH7
D 1±
0.12-C 2-C
A A
3-Female Thread (Coarse) Type25 6.3
QVolume Discount Rate (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49Discount Rate Unit Price 5% 10%
Days to Ship Standard To be quotedE For orders larger than indicated quantity, please request a quotation.
Price
CAD Data
QVolume Discount Rate (ERound down to one Cent.) P.87- SSCSPK
Quantity 1~29 30~39 40~49 50~99Discount Rate Unit Price 5% 10% 15%
Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Price - Other than SSCSPK
Quantity 1~29 30~39 40~49 50~99Discount Rate Unit Price 5% 10% 15%
Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
QFeature: Compared to the Set Screw Type and Clamp Type, post assembly install and remove is possible, making for easy maintenance.P.243 · P.244
6
6
Type M Material
S Surface Treatment
A Accessory2-Hole 2-Female Thread
SCSPK SCSPT1.1191/C45E
Blackening Coating Hexagon Socket Head Cap Screw 2 pcs.
PSCSPK PSCSPT Electroless Nickel Plating Hexagon Socket Head Cap Screw 2 pcs.(JIS SUS)SSCSPK SSCSPT 1.4301/X5CrNi18-10 -
Type Shaft Collar WedgeA
Accessory2-Hole2-Female Thread
M Material
S Surface Treatment
M Material
SCWM SCWW1.1191/C45E
Blackening Coating1.4301/
X5CrNi18-10
Hexagon Socket Head Cap Screw 1 pc.
PSCWM PSCWW Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCWM SSCWW 1.4301/X5CrNi18-10 -
Type Shaft Collar WedgeA
Accessory3-Hole3-Female Thread
M Material
S Surface Treatment
M Material
SCWT SCWR1.1191/C45E
Blackening Coating1.4301/
X5CrNi18-10
Hexagon Socket Head Cap Screw 1 pc.
PSCWT PSCWR Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCWT SSCWR 1.4301/X5CrNi18-10 -
E The halves must remain in the same orientation as shipped when in use.EPrices in ( ) are for 2-Hole Type only.
Part Number B
SelectableD1
M
(Coarse
Thread)
d R W X Y
2-Hole Type 2-Female Thread Type € Unit Price
NThrough Hole
P2
M1
(Coarse Thread)
P1SCSPTSCSPK
PSCSPTPSCSPK
SSCSPTSSCSPKType D
(2-Hole Type)
SCSPK
PSCSPK
SSCSPK
(2-Female Thread Type)
SCSPT
PSCSPT
SSCSPT
68
20M3 3.4 3
1 6 4 3.5 13
- -
10 M4 4.5 3.75
8
825
M3 3.4 3
1.5
8
5
4.5
16.510 M4 4.5 3.75
12
30
M5 5.5 4.5
9
1915 M6 6.6 6
10
8 M3 3.4 3
5.5
20
M4
2010 M4 4.5 3.75
12 M5 5.5 4.5
10
15 35 M6 6.6 6 6 22.5
12
8
30
M3 3.4 3
5 2122
10 M4 4.5 3.75
12 M5 5.5 4.5
15 35 M6 6.6 6 11 6 23.5
13
10 30 M4 4.5 3.75 105
21.5
2412 34 M5 5.5 4.511
23.5
15 35 M6 6.6 6
6
24
15
10 34 M4 4.5 3.75 11.5 24.5
2512 35 M5 5.5 4.5 12 25
15 40 M6 6.6 6 13 8 27.5
16
1035 M5 5.5 4.5 12 6 25.5
2812
15
40
M6 6.6 6 13 8 28
18
10M5 5.5 4.5 14 7 29
M5
30
12
15 45 M6 6.6 6 15 8 31.5
20
1040 M5 5.5 4.5 14 7 30
12
1545
M6 6.6 6 15 8 32.5
25
12 M5 5.5 4.5 17 7
6.6
35
3515 50
M6 6.6 6
18
10
37.5
2055 20
40
3015 42.5
M642
2060
M8 9 723
45
35 15 M6 6.6 62
12 47.5 47
40 18 70 M8 9 7 26 13 9 55M8
56
50 22 85 M10 11 9 3 32 16 11 67.5 66
EC (O.D./I.D. Chamfers) will be 1.0 for D30 or more.
Part NumberD1 B P X Y S M M1 R
€ Unit PriceType D SCWM PSCWM SSCWM SCWW PSCWW SSCWW
(2-Hole Type)
SCWMPSCWMSSCWM
(2-Female Thread Type)
SCWWPSCWWSSCWW
10 2510
18 8.5 3.54.5 4 4 412 28 20 9.5 5
15 30 23 11 4.516 34
12
25 11.5 6
5.5 5 5 4.520 38 29 13.5 725 44 34 16 930 48 39 18.5 835 56
1546 22 9.5 6.6 5 -
4.540 68 54 24.5 189 5 -
50 78 64 29.5 19
EC (O.D./I.D. Chamfers) will be 1.0 for D30 or more.
Part NumberD1 B P X Y S M M1 R
€ Unit PriceType D SCWT PSCWT SSCWT SCWR PSCWR SSCWR
(3-Hole Type)
SCWTPSCWTSSCWT
(3-Female Thread Type)
SCWRPSCWRSSCWR
10 2510
18 8.5 3.54.5 4 4 412 28 20 9.5 5
15 30 23 11 4.516 34
12
25 11.5 6
5.5 5 5 4.520 38 29 13.5 725 44 34 16 930 48 39 18.5 835 56
1546 22 9.5 6.6 5 6
4.540 68 54 24.5 189 5
850 78 64 29.5 19 -
E When using the Wedge Type as show in the diagram on the right, the collar can be fully tightened to the plate first with the screws (1), the shaft can then be clamped using the screw (2).
Screw (1)
Screw (2)
Example
-2491 -2501
Part Number BSelectable D1 B1 t
M(Coarse Thread)
d R W X Y Z€ Unit Price
Clamp Type Split TypeType D SCDJ PSCDJ SSCDJ SCSPDJ PSCSPDJ SSCSPDJ
(Clamp Type)
SCDJPSCDJSSCDJ
* marked dimensions are for the Clamp Type only.(Split Type)
SCSPDJPSCSPDJSSCSPDJ
8
10
258
2M3 3.4 3
1.5
85
7~910
309 8~10
12 10 9~1016 12 35
10
M5 5.5 4.5
12 6 11~1220 13 40
3
147
1325
15
4512
17 1630 50 20
618~20
*40 60 2 25 23*50 21 80 18 M8 9 7 3 32 15 28
Shaft Collars -Keyless Bushing-
-Standard Type (with centering function) / Quick Mount (Nut) Type-
Shaft Collars -Standard Type with Urethane - Compact -
-Clamp Type / Split Type-
QFeatures : Standard Type with Urethane: Reduces noise generated by metal-to-metal contact. Compact Type with Urethane: Smaller by up to 44% in width (B dimension) and 25% in outer diameter (D1 dimension) than Standard Type with Urethane.
Q Standard Type with Urethane
Clamp Type
Q Compact Type with Urethane
Clamp Type
Q Standard Type with
Urethane Split Type
Q Compact Type with
Urethane Split Type
Part Number - B
SCSPD8SCDJ8
SCSPDJ10--
1010
Order Example
D P.87DaysDays to Ship
SCD
DSize Differences Compact Standard
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
8 -8 -5 10 25 18 3010 -8 -5 10 30 18 3512 -8 -10 10 30 18 4016 -6 -5 12 35 18 4020 -7 -5 13 40 20 4525 -5 -5 15 45 20 5030 -5 -5 15 50 20 5540 -8 -10 15 60 23 7050 -6 -5 21 80 27 85
ECompactness Comparison Table
6.36
.3
2-d2-M
tB
XX
2xRY
WB1
2-R
C0.5
+0.
05+
0.01
D D 1±
0.1
6.3
C0.5
25 6.3Slit Split
6.3
6.3R
dM
tB
ZX
2xRY
WB1 C0.5
+0.
05+
0.01
D D 1±
0.1
C0.5
Part Number
SCML16SCQL30
Order Example
D P.87DaysDays to Ship
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~9 10~14Discount Rate € Unit Price 5%Days to Ship Standard To be quoted
E For orders larger than indicated quantity, please request a quotation.
Price
CAD Data
QFeatures : Enhanced thrust load rating standards.
5%
QVolume Discount (ERound down to one Cent.) P.87- Other than SSCSPDJQuantity 1~29 30~39 40~49 50~99
Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
- SSCSPDJ
EFor orders larger than indicated quantity, please request a quotation.
Price
2 Days
Part NumberB D1 B1 t
M(Coarse Thread)
d R W X Y Z€ Unit Price
Type D SCD PSCD SSCD SCSPD PSCSPD SSCSPD
(Clamp Type)
SCDPSCDSSCD
* marked dimensions are for Slit Type only.
(Split Type)
SCSPDPSCSPDSSCSPD
*310 15 8
2M3 3.4 3
1.04.5 3
3~5*4 3.5~6*5
12 20 10 M4 4.5 3.75 6 46~7
6 6~6.58
18
30
15
3
M6 7 61.5
9 5 7~1010
3510
68~12.5
1211
9~12.513 10~12.515
40 138
11~1316 11~1320
20
45
5
15 13~1525 50 18
1016~18
30 55 20 15~20*35 60
2.023 12 17.5~21
*40 23 70 18 M8 9 7 26 13 20~23*50 27 85 22 M10 11 9 32 16 25~28
DamperMMaterial: UrethaneHHardness: Slit : Shore A70: No.3~6 (Ester Type) : Shore A90: No.8~50 (Ether Type) Split : Shore A70 (Ester Type)(Allowable Temperature: 70°C)EUrethane Rubber Features DP.Q2 -359
EMaterial and surface treatment will be revised to the indicated in ( ) without notice.
Type MMaterial
SSurface Treatment
AAccessorySlit Split
SCD SCSPD 1.0038/S235JRE1.1191/C45E
Cathodic Electrodeposition Coating
EBlackeningClamp: Hexagon Socket Head Cap Screw 1 pc.Split: Hexagon Socket Head Cap Screw 2 pcs.
PSCD PSCSPD Electroless Nickel Plating Clamp: Hexagon Socket Head Cap Screw 1 pc. (JIS SUS)Split: Hexagon Socket Head Cap Screw 2 pcs. (JIS SUS)SSCD SSCSPD 1.4301/X5CrNi18-10 -
DamperMMaterial: Ester UrethaneHHardness: Shore A70(Allowable Temperature: 70°C) EUrethane Rubber Features DP.Q2 -359
E Refer to Compactness Comparison Table below.
Type MMaterial
SSurface Treatment
AAccessorySlit Split
SCDJ SCSPDJ1.1191/C45E
Black Oxide Coating Clamp: Hexagon Socket Head Cap Screw 1 pc.Split: Hexagon Socket Head Cap Screw 2 pcs.
PSCDJ PSCSPDJ Electroless Nickel Plating Clamp: Hexagon Socket Head Cap Screw 1 pc. (JIS SUS)Split: Hexagon Socket Head Cap Screw 2 pcs. (JIS SUS)SSCDJ SSCSPDJ 1.4301/X5CrNi18-10 -
Q Standard Type
(With Centering Function)
Q Quick Mount (Nut) Type
Type MMaterial SSurface Treatment
SCML1.1191/C45E
Black Oxide Coating
PSCML Electroless Nickel Plating
SSCML 1.4301/X5CrNi18-10 -
Type MMaterial SSurface Treatment
SCQL 1.1191/C45EManganese Phosphate
PSCQL Electroless Nickel Plating
CAD Data
*D3 ~D13:C0.5 D15~D50:C1
25 6.3
6.3
6.3
RC*
dC*
M
tB
ZX
2xRY
W
B1
+0.
05+
0.01
D D 1±
0.1
ED dimension tolerance of SCD ranges from +0.01 to +0.08.
Slit Split
6.3
6.3
R
dM
tB
XX
2xRY
W
B1
C*
C*
+0.
05+
0.01
D D 1±
0.1
E Maximum thrust loads obtained by tightening test are shown on P.236
E Teflon tape (sealing tape) is wrapped around the thread face. Must be re-taped for reuse.
D1
D
B2
D2
B1
B6.
3
6.3
Q Recommended Shaft ToleranceShaft Outer Diameter g6 (h7)Finish the surface roughness to: Ra = 1.6a or better.
Q Cautions for InstallationUse a torque wrench to tighten the screws.
SCML16
* For details, refer to P.235
Example
Part NumberD1 B1 B2 B
Locking Screws Allowable Thrust Load (kN) Tightening Torque(Nm)
Mass (g)
€ Unit Price
Type D MxL Quantity SCML PSCML SSCML SCML PSCML SSCML
SCMLPSCMLSSCML
12 42 17 8 27 M6x25 3 13.3 13.3 4.0 15.7 9.6 26216 43 16 9 27 M6x25 3 13.3 13.3 4.0 15.7 9.6 25920 52 16 9 27 M6x25 4 17.8 17.8 5.3 15.7 9.6 37225 54 16 9 27 M6x25 4 17.8 17.8 5.3 15.7 9.6 37130 63 16 10.5 28.5 M6x25 5 22.2 22.2 6.7 15.7 9.6 52335 66 16 10.5 28.5 M6x25 5 22.2 22.2 6.7 15.7 9.6 534
Part NumberD1 D2 B1 B2 B
Allowable Thrust Load (kN) Tightening Torque(Nm)
Mass (g)€ Unit Price
Type D SCQL PSCQL SCQL PSCQL
SCQLPSCQL
12 19 21 9 8 20 3.7 2.1 29.4 2916 24 26 12 10 25.5 5.4 3.1 49 5420 30 32.5 14.5 13 31.5 8.8 4.9 68.6 10525 36 40 17 15 36 15.7 8.8 88.2 17130 41 45 17 17 41 17.7 9.9 127 21835 46 51 19 19 45 20.6 11.5 167 288
E Locking screws for SCML and PSCML are colored red due to coating agent.
Screw hole for removalB1 B2
B
DD 1
6.3
1.6
* Removal screw holes and Locking screw holes have the same thread size.
E Maximum thrust loads obtained by tightening test are shown on P.236
6
6
-2491 -2501
Part Number BSelectable D1 B1 t
M(Coarse Thread)
d R W X Y Z€ Unit Price
Clamp Type Split TypeType D SCDJ PSCDJ SSCDJ SCSPDJ PSCSPDJ SSCSPDJ
(Clamp Type)
SCDJPSCDJSSCDJ
* marked dimensions are for the Clamp Type only.(Split Type)
SCSPDJPSCSPDJSSCSPDJ
8
10
258
2M3 3.4 3
1.5
85
7~910
309 8~10
12 10 9~1016 12 35
10
M5 5.5 4.5
12 6 11~1220 13 40
3
147
1325
15
4512
17 1630 50 20
618~20
*40 60 2 25 23*50 21 80 18 M8 9 7 3 32 15 28
Shaft Collars -Keyless Bushing-
-Standard Type (with centering function) / Quick Mount (Nut) Type-
Shaft Collars -Standard Type with Urethane - Compact -
-Clamp Type / Split Type-
QFeatures : Standard Type with Urethane: Reduces noise generated by metal-to-metal contact. Compact Type with Urethane: Smaller by up to 44% in width (B dimension) and 25% in outer diameter (D1 dimension) than Standard Type with Urethane.
Q Standard Type with Urethane
Clamp Type
Q Compact Type with Urethane
Clamp Type
Q Standard Type with
Urethane Split Type
Q Compact Type with
Urethane Split Type
Part Number - B
SCSPD8SCDJ8
SCSPDJ10--
1010
Order Example
D P.87DaysDays to Ship
SCD
DSize Differences Compact Standard
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
8 -8 -5 10 25 18 3010 -8 -5 10 30 18 3512 -8 -10 10 30 18 4016 -6 -5 12 35 18 4020 -7 -5 13 40 20 4525 -5 -5 15 45 20 5030 -5 -5 15 50 20 5540 -8 -10 15 60 23 7050 -6 -5 21 80 27 85
ECompactness Comparison Table
6.36
.3
2-d2-M
tB
XX
2xRY
WB1
2-R
C0.5
+0.
05+
0.01
D D 1±
0.1
6.3
C0.5
25 6.3Slit Split
6.3
6.3R
dM
tB
ZX
2xRY
WB1 C0.5
+0.
05+
0.01
D D 1±
0.1
C0.5
Part Number
SCML16SCQL30
Order Example
D P.87DaysDays to Ship
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~9 10~14Discount Rate € Unit Price 5%Days to Ship Standard To be quoted
E For orders larger than indicated quantity, please request a quotation.
Price
CAD Data
QFeatures : Enhanced thrust load rating standards.
5%
QVolume Discount (ERound down to one Cent.) P.87- Other than SSCSPDJQuantity 1~29 30~39 40~49 50~99
Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
- SSCSPDJ
EFor orders larger than indicated quantity, please request a quotation.
Price
2 Days
Part NumberB D1 B1 t
M(Coarse Thread)
d R W X Y Z€ Unit Price
Type D SCD PSCD SSCD SCSPD PSCSPD SSCSPD
(Clamp Type)
SCDPSCDSSCD
* marked dimensions are for Slit Type only.
(Split Type)
SCSPDPSCSPDSSCSPD
*310 15 8
2M3 3.4 3
1.04.5 3
3~5*4 3.5~6*5
12 20 10 M4 4.5 3.75 6 46~7
6 6~6.58
18
30
15
3
M6 7 61.5
9 5 7~1010
3510
68~12.5
1211
9~12.513 10~12.515
40 138
11~1316 11~1320
20
45
5
15 13~1525 50 18
1016~18
30 55 20 15~20*35 60
2.023 12 17.5~21
*40 23 70 18 M8 9 7 26 13 20~23*50 27 85 22 M10 11 9 32 16 25~28
DamperMMaterial: UrethaneHHardness: Slit : Shore A70: No.3~6 (Ester Type) : Shore A90: No.8~50 (Ether Type) Split : Shore A70 (Ester Type)(Allowable Temperature: 70°C)EUrethane Rubber Features DP.Q2 -359
EMaterial and surface treatment will be revised to the indicated in ( ) without notice.
Type MMaterial
SSurface Treatment
AAccessorySlit Split
SCD SCSPD 1.0038/S235JRE1.1191/C45E
Cathodic Electrodeposition Coating
EBlackeningClamp: Hexagon Socket Head Cap Screw 1 pc.Split: Hexagon Socket Head Cap Screw 2 pcs.
PSCD PSCSPD Electroless Nickel Plating Clamp: Hexagon Socket Head Cap Screw 1 pc. (JIS SUS)Split: Hexagon Socket Head Cap Screw 2 pcs. (JIS SUS)SSCD SSCSPD 1.4301/X5CrNi18-10 -
DamperMMaterial: Ester UrethaneHHardness: Shore A70(Allowable Temperature: 70°C) EUrethane Rubber Features DP.Q2 -359
E Refer to Compactness Comparison Table below.
Type MMaterial
SSurface Treatment
AAccessorySlit Split
SCDJ SCSPDJ1.1191/C45E
Black Oxide Coating Clamp: Hexagon Socket Head Cap Screw 1 pc.Split: Hexagon Socket Head Cap Screw 2 pcs.
PSCDJ PSCSPDJ Electroless Nickel Plating Clamp: Hexagon Socket Head Cap Screw 1 pc. (JIS SUS)Split: Hexagon Socket Head Cap Screw 2 pcs. (JIS SUS)SSCDJ SSCSPDJ 1.4301/X5CrNi18-10 -
Q Standard Type
(With Centering Function)
Q Quick Mount (Nut) Type
Type MMaterial SSurface Treatment
SCML1.1191/C45E
Black Oxide Coating
PSCML Electroless Nickel Plating
SSCML 1.4301/X5CrNi18-10 -
Type MMaterial SSurface Treatment
SCQL 1.1191/C45EManganese Phosphate
PSCQL Electroless Nickel Plating
CAD Data
*D3 ~D13:C0.5 D15~D50:C1
25 6.3
6.3
6.3
RC*
dC*
M
tB
ZX
2xRY
W
B1
+0.
05+
0.01
D D 1±
0.1
ED dimension tolerance of SCD ranges from +0.01 to +0.08.
Slit Split
6.3
6.3
R
dM
tB
XX
2xRY
W
B1
C*
C*
+0.
05+
0.01
D D 1±
0.1
E Maximum thrust loads obtained by tightening test are shown on P.236
E Teflon tape (sealing tape) is wrapped around the thread face. Must be re-taped for reuse.
D1
D
B2
D2
B1
B
6.3
6.3
Q Recommended Shaft ToleranceShaft Outer Diameter g6 (h7)Finish the surface roughness to: Ra = 1.6a or better.
Q Cautions for InstallationUse a torque wrench to tighten the screws.
SCML16
* For details, refer to P.235
Example
Part NumberD1 B1 B2 B
Locking Screws Allowable Thrust Load (kN) Tightening Torque(Nm)
Mass (g)
€ Unit Price
Type D MxL Quantity SCML PSCML SSCML SCML PSCML SSCML
SCMLPSCMLSSCML
12 42 17 8 27 M6x25 3 13.3 13.3 4.0 15.7 9.6 26216 43 16 9 27 M6x25 3 13.3 13.3 4.0 15.7 9.6 25920 52 16 9 27 M6x25 4 17.8 17.8 5.3 15.7 9.6 37225 54 16 9 27 M6x25 4 17.8 17.8 5.3 15.7 9.6 37130 63 16 10.5 28.5 M6x25 5 22.2 22.2 6.7 15.7 9.6 52335 66 16 10.5 28.5 M6x25 5 22.2 22.2 6.7 15.7 9.6 534
Part NumberD1 D2 B1 B2 B
Allowable Thrust Load (kN) Tightening Torque(Nm)
Mass (g)€ Unit Price
Type D SCQL PSCQL SCQL PSCQL
SCQLPSCQL
12 19 21 9 8 20 3.7 2.1 29.4 2916 24 26 12 10 25.5 5.4 3.1 49 5420 30 32.5 14.5 13 31.5 8.8 4.9 68.6 10525 36 40 17 15 36 15.7 8.8 88.2 17130 41 45 17 17 41 17.7 9.9 127 21835 46 51 19 19 45 20.6 11.5 167 288
E Locking screws for SCML and PSCML are colored red due to coating agent.
Screw hole for removalB1 B2
B
DD 1
6.3
1.6
* Removal screw holes and Locking screw holes have the same thread size.
E Maximum thrust loads obtained by tightening test are shown on P.236
6
6
-2511 -2521
Shaft Collars -For Bearing Fixing-
-Set Screw Type-
Shaft Collars -For Bearing Fixing- (Space-saving design)
-Set Screw Compact Type-
QFeature: For bearing inner race retention. Requires no special tools, and economical compared to specialty bearing nuts. QFeature: Smaller by up to 40% in width (B dimension) and 19% in outer diameter (D1 dimension) than Set Screw Type (P.251).
D P.87DaysDays
to Ship
Part Number - Ds
SCSBS12 - 18Order
Example
Part Number - Ds
SCBRJ10 - 13OrderExample
D P.87DaysDaysto Ship
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%
EFor orders larger than indicated quantity, please request a quotation.
Price
CAD Data CAD Data
QVolume Discount (ERound down to one Cent.) P.87- Other than SCSSAW,Quantity 1~29 30~39 40~49 50~99
Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
- SCSSAW
EFor orders larger than indicated quantity, please request a quotation.
Price
6
6
Type MMaterial
SSurface Treatment
AAccessoryShort Shoulder Long Shoulder
SCBRJ SCBSJ1.1191/C45E
Black oxide coating 2 Set Screws
PSCBRJ PSCBSJ Electroless Nickel Plating 2 Set Screws(JIS SUS)SSCBRJ SSCBSJ 1.4301/X5CrNi18-10 -
QSet Screw Compact TypeQSet Screw Flat Type
Part NumberDs
SelectableApplicable Bearing (O.D.) B B1 D1
Set ScrewM x Length
b€ Unit Price
Type DSCSBRSCSBS
PSCSBRPSCSBS
SSCSBRSSCSBS
SCSRAWSCSSAW
(Short Shoulder Type)
SCSBRPSCSBRSSCSBRSCSRAW
(Long Shoulder Type)
SCSBSPSCSBSSSCSBSSCSSAW
35 673ZZ (6) ∙ 683ZZ (7)
8 11
10M3x3
7
6 693ZZ (8) ∙ 603ZZ (9) ∙ 623ZZ (10)
46 674ZZ (7) ∙ 684ZZ (9)
12*7 694ZZ (11) ∙ 604ZZ (12) ∙ 624ZZ (13)
57 675ZZ (8)
14
M4x3
*8 685ZZ (11) ∙ 695ZZ (13) ∙ 605ZZ (14) ∙ 625ZZ (16)
68 676ZZ (10) ∙ 686ZZ (13)
15*9 696ZZ (15) ∙ 606ZZ (17) ∙ 626ZZ (19)
811 678ZZ (12) ∙ 688ZZ (16)
10
12.5
16
8.5
*12 698ZZ (19) ∙ 608ZZ (22) ∙ 628ZZ (24)
10
*13 6800ZZ (19)18
*14 6900ZZ (22) ∙ 6000ZZ (26)16 6200ZZ (30) ∙ 6300ZZ (35) 20
12
15 6801ZZ (21)22
M5x4
*16 6901ZZ (24) ∙ 6001ZZ (28)*18 6201ZZ (32) ∙ 6301ZZ (37)
15
*18 6802ZZ (24) ∙ 6902ZZ (28)25*19 6002ZZ (32)
*21 6202ZZ (35) ∙ 6302ZZ (42)
(17)
*20 6803ZZ (26)- 27*21 6903ZZ (30) ∙ 6003ZZ (35)
*23 6203ZZ (40) ∙ 6303ZZ (47)
20
23 6704ZZ (27) ∙ 6804ZZ (32)
12 15
32
M6x5 10
*24 6904ZZ (37)*27 6004ZZ (42) ∙ 6204ZZ (47)
25
28 6805ZZ (37)
42*29 6905ZZ (42)*31 6005ZZ (47)*32 6205ZZ (52)
30
33 6806ZZ (42)15.5
19
45
M8x6 13
35 6906ZZ (47)*38 6006ZZ (55) ∙ 6206ZZ (62) ∙ 6306ZZ (72)
(35)
38 6807ZZ (47)
-
5041 6907ZZ (55)43 6007ZZ (62) ∙ 6207ZZ (72)
(40)43 6808ZZ (52)
21 60 M10x8 1545 6908ZZ (62)48 6008ZZ (68) ∙ 6208ZZ (80)
E Prices in ( ) are for Long Shoulder Type only.
- Aluminum collars areavailable for * marked Ds dimensions only.
- D dimensions in ( ) are available for Long Shoulder Type only.
)E Prices in ( ) are for Long Shoulder Type only.
Part NumberDs
SelectableApplicable Bearing (O.D.) B B1 D1
Set Screw
M x Length
b
€ Unit Price
Type DSCBRJSCBSJ
PSCBRJPSCBSJ
SSCBRJSSCBSJ
(Short Shoulder Type)
SCBRJPSCBRJSSCBRJ
(Long Shoulder Type)
SCBSJPSCBSJSSCBSJ
4 7 674ZZ (7) ∙ 684ZZ (9) ∙ 694ZZ (11) ∙ 604ZZ (12) ∙ 624ZZ (13)
6 9
10
M3x3
55 8 675ZZ (8) ∙ 695ZZ (13) ∙ 605ZZ (14) ∙ 625ZZ (16) 12
6 9 676ZZ (10) ∙ 686ZZ (13) ∙ 696ZZ (15) ∙ 606ZZ (17) ∙ 626ZZ (19) 13
8 12 678ZZ (12) ∙ 688ZZ (16) ∙ 698ZZ (19) ∙ 608ZZ (22) ∙ 628ZZ (24) 15
10
13 6800ZZ (19)
7.5
10
17
6
14 6900ZZ (22) ∙ 6000ZZ (26)
16 6200ZZ (30) ∙ 6300ZZ (35)
12
15 6701ZZ (18) ∙ 6801ZZ (21)
19
M4x3
16 6901ZZ (24) ∙ 6001ZZ (28)
18 6201ZZ (32) ∙ 6301ZZ (37)
15
18 6802ZZ (24) ∙ 6902ZZ (28)
2219 6002ZZ (32)
21 6202ZZ (35) ∙ 6302ZZ (42)
(17)
20 6803ZZ (26)
- 2421 6903ZZ (30) ∙ 6003ZZ (35)
23 6203ZZ (40) ∙ 6303ZZ (47)
20
23 6704ZZ (27) ∙ 6804ZZ (32)
8.5 12
29
M5x4 7
24 6904ZZ (37)
27 6004ZZ (42) ∙ 6204ZZ (47)
25
29 6905ZZ (42)
3431 6005ZZ (47)
32 6205ZZ (52) ∙ 6305ZZ (62)
3035 6906ZZ (47)
10
14
41
M6x5 838 6006ZZ (55) ∙ 6206ZZ (62) ∙ 6306ZZ (72)
(35)41 6907ZZ (55)
-46
43 6007ZZ (62) ∙ 6207ZZ (72)
(40) 48 6008ZZ (68) ∙ 6208ZZ (80) 16 53 M8x6 10
D dimensions in ( ) are available for Long Shoulder Type only. )
Type MMaterial
SSurface Treatment
AAccessoryShort Shoulder Long Shoulder
SCSBR SCSBS1.1191/C45E
Black Oxide Coating 2 Set Screws
PSCSBR PSCSBS Electroless Nickel Plating2 Set Screws
(JIS SUS)SSCSBR SSCSBS 1.4301/X5CrNi18-10 -
SCSRAW SCSSAW EN AW-2017/AlCu4MgSi Clear Anodizing
SCCJ15-524
Example
Short Shoulder Type Long Shoulder Type
*D4 ~D25:C0.5 D30~D40:C1
b±0.1A
D+
0.05
+0.
01
0.02 AB ±0.1
b/2
6.3
6.3
D±
0.1
1
–0.20
Ds
2–M
6.325
b±0.1A
D+
0.05
+0.
01
6.3
0.02 AB1±0.1
b/2
6.3
D±
0.1
1
–0.20
Ds
6.3
6.3
6.3
*2–C
*2–C
6.3
*2–C
*2–C
Part Number - DS - (YC)
SCSBS20 - 23 - YC
8 Days
Alterations
Alteration
Thread Lock Set Screw
Code YC
Spec.
Change included set screws to thread locking compound treated type.QThread Locking Coating Threads are coated with special resin with superior elasticity as well as resistance to abrasion and oil.- Effect is maximum at the first use, and it will gradually decrease after
the fourth use.XNot applicable to SCSRAW and SCSSAW.
Price Adder D3~10:1,50 EUR, D12~25:2,50 EUR, D30~40:3,50 EUR
Thread Locking Coating
SCBSJ
Bearings
Shaft
(Compact Type)SCSBS
Example
* Included set screws can be optionally changed to thread locking compound treated type. See Alterations below.
*D3 ~D25:C0.5 D30~D40:C1
6.325
b
2–M
±0.1 b±0.1
*
0.02 A ±0.1
2–C
*2–C
b/2
D
A A
+0.
05+
0.01
D+
0.05
+0.
01
D±
0.1
6.3
6.3
6.3
6.3 6.3
*
0.02 A B1±0.1
2–C
*2–C
b/2
6.3
6.36.
3
1
D±
0.1
1
B
–0.20
Ds
–0.20
Ds
Short Shoulder Type Long Shoulder Type
-2511 -2521
Shaft Collars -For Bearing Fixing-
-Set Screw Type-
Shaft Collars -For Bearing Fixing- (Space-saving design)
-Set Screw Compact Type-
QFeature: For bearing inner race retention. Requires no special tools, and economical compared to specialty bearing nuts. QFeature: Smaller by up to 40% in width (B dimension) and 19% in outer diameter (D1 dimension) than Set Screw Type (P.251).
D P.87DaysDays
to Ship
Part Number - Ds
SCSBS12 - 18Order
Example
Part Number - Ds
SCBRJ10 - 13OrderExample
D P.87DaysDaysto Ship
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%
EFor orders larger than indicated quantity, please request a quotation.
Price
CAD Data CAD Data
QVolume Discount (ERound down to one Cent.) P.87- Other than SCSSAW,Quantity 1~29 30~39 40~49 50~99
Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
- SCSSAW
EFor orders larger than indicated quantity, please request a quotation.
Price
6
6
Type MMaterial
SSurface Treatment
AAccessoryShort Shoulder Long Shoulder
SCBRJ SCBSJ1.1191/C45E
Black oxide coating 2 Set Screws
PSCBRJ PSCBSJ Electroless Nickel Plating 2 Set Screws(JIS SUS)SSCBRJ SSCBSJ 1.4301/X5CrNi18-10 -
QSet Screw Compact TypeQSet Screw Flat Type
Part NumberDs
SelectableApplicable Bearing (O.D.) B B1 D1
Set ScrewM x Length
b€ Unit Price
Type DSCSBRSCSBS
PSCSBRPSCSBS
SSCSBRSSCSBS
SCSRAWSCSSAW
(Short Shoulder Type)
SCSBRPSCSBRSSCSBRSCSRAW
(Long Shoulder Type)
SCSBSPSCSBSSSCSBSSCSSAW
35 673ZZ (6) ∙ 683ZZ (7)
8 11
10M3x3
7
6 693ZZ (8) ∙ 603ZZ (9) ∙ 623ZZ (10)
46 674ZZ (7) ∙ 684ZZ (9)
12*7 694ZZ (11) ∙ 604ZZ (12) ∙ 624ZZ (13)
57 675ZZ (8)
14
M4x3
*8 685ZZ (11) ∙ 695ZZ (13) ∙ 605ZZ (14) ∙ 625ZZ (16)
68 676ZZ (10) ∙ 686ZZ (13)
15*9 696ZZ (15) ∙ 606ZZ (17) ∙ 626ZZ (19)
811 678ZZ (12) ∙ 688ZZ (16)
10
12.5
16
8.5
*12 698ZZ (19) ∙ 608ZZ (22) ∙ 628ZZ (24)
10
*13 6800ZZ (19)18
*14 6900ZZ (22) ∙ 6000ZZ (26)16 6200ZZ (30) ∙ 6300ZZ (35) 20
12
15 6801ZZ (21)22
M5x4
*16 6901ZZ (24) ∙ 6001ZZ (28)*18 6201ZZ (32) ∙ 6301ZZ (37)
15
*18 6802ZZ (24) ∙ 6902ZZ (28)25*19 6002ZZ (32)
*21 6202ZZ (35) ∙ 6302ZZ (42)
(17)
*20 6803ZZ (26)- 27*21 6903ZZ (30) ∙ 6003ZZ (35)
*23 6203ZZ (40) ∙ 6303ZZ (47)
20
23 6704ZZ (27) ∙ 6804ZZ (32)
12 15
32
M6x5 10
*24 6904ZZ (37)*27 6004ZZ (42) ∙ 6204ZZ (47)
25
28 6805ZZ (37)
42*29 6905ZZ (42)*31 6005ZZ (47)*32 6205ZZ (52)
30
33 6806ZZ (42)15.5
19
45
M8x6 13
35 6906ZZ (47)*38 6006ZZ (55) ∙ 6206ZZ (62) ∙ 6306ZZ (72)
(35)
38 6807ZZ (47)
-
5041 6907ZZ (55)43 6007ZZ (62) ∙ 6207ZZ (72)
(40)43 6808ZZ (52)
21 60 M10x8 1545 6908ZZ (62)48 6008ZZ (68) ∙ 6208ZZ (80)
E Prices in ( ) are for Long Shoulder Type only.
- Aluminum collars areavailable for * marked Ds dimensions only.
- D dimensions in ( ) are available for Long Shoulder Type only.
)E Prices in ( ) are for Long Shoulder Type only.
Part NumberDs
SelectableApplicable Bearing (O.D.) B B1 D1
Set Screw
M x Length
b
€ Unit Price
Type DSCBRJSCBSJ
PSCBRJPSCBSJ
SSCBRJSSCBSJ
(Short Shoulder Type)
SCBRJPSCBRJSSCBRJ
(Long Shoulder Type)
SCBSJPSCBSJSSCBSJ
4 7 674ZZ (7) ∙ 684ZZ (9) ∙ 694ZZ (11) ∙ 604ZZ (12) ∙ 624ZZ (13)
6 9
10
M3x3
55 8 675ZZ (8) ∙ 695ZZ (13) ∙ 605ZZ (14) ∙ 625ZZ (16) 12
6 9 676ZZ (10) ∙ 686ZZ (13) ∙ 696ZZ (15) ∙ 606ZZ (17) ∙ 626ZZ (19) 13
8 12 678ZZ (12) ∙ 688ZZ (16) ∙ 698ZZ (19) ∙ 608ZZ (22) ∙ 628ZZ (24) 15
10
13 6800ZZ (19)
7.5
10
17
6
14 6900ZZ (22) ∙ 6000ZZ (26)
16 6200ZZ (30) ∙ 6300ZZ (35)
12
15 6701ZZ (18) ∙ 6801ZZ (21)
19
M4x3
16 6901ZZ (24) ∙ 6001ZZ (28)
18 6201ZZ (32) ∙ 6301ZZ (37)
15
18 6802ZZ (24) ∙ 6902ZZ (28)
2219 6002ZZ (32)
21 6202ZZ (35) ∙ 6302ZZ (42)
(17)
20 6803ZZ (26)
- 2421 6903ZZ (30) ∙ 6003ZZ (35)
23 6203ZZ (40) ∙ 6303ZZ (47)
20
23 6704ZZ (27) ∙ 6804ZZ (32)
8.5 12
29
M5x4 7
24 6904ZZ (37)
27 6004ZZ (42) ∙ 6204ZZ (47)
25
29 6905ZZ (42)
3431 6005ZZ (47)
32 6205ZZ (52) ∙ 6305ZZ (62)
3035 6906ZZ (47)
10
14
41
M6x5 838 6006ZZ (55) ∙ 6206ZZ (62) ∙ 6306ZZ (72)
(35)41 6907ZZ (55)
-46
43 6007ZZ (62) ∙ 6207ZZ (72)
(40) 48 6008ZZ (68) ∙ 6208ZZ (80) 16 53 M8x6 10
D dimensions in ( ) are available for Long Shoulder Type only. )
Type MMaterial
SSurface Treatment
AAccessoryShort Shoulder Long Shoulder
SCSBR SCSBS1.1191/C45E
Black Oxide Coating 2 Set Screws
PSCSBR PSCSBS Electroless Nickel Plating2 Set Screws
(JIS SUS)SSCSBR SSCSBS 1.4301/X5CrNi18-10 -
SCSRAW SCSSAW EN AW-2017/AlCu4MgSi Clear Anodizing
SCCJ15-524
Example
Short Shoulder Type Long Shoulder Type
*D4 ~D25:C0.5 D30~D40:C1
b±0.1A
D+
0.05
+0.
01
0.02 AB ±0.1
b/2
6.3
6.3
D±
0.1
1
–0.20
Ds
2–M
6.325
b±0.1A
D+
0.05
+0.
01
6.3
0.02 AB1±0.1
b/2
6.3
D±
0.1
1
–0.20
Ds
6.3
6.3
6.3
*2–C
*2–C
6.3
*2–C
*2–C
Part Number - DS - (YC)
SCSBS20 - 23 - YC
8 Days
Alterations
Alteration
Thread Lock Set Screw
Code YC
Spec.
Change included set screws to thread locking compound treated type.QThread Locking Coating Threads are coated with special resin with superior elasticity as well as resistance to abrasion and oil.- Effect is maximum at the first use, and it will gradually decrease after
the fourth use.XNot applicable to SCSRAW and SCSSAW.
Price Adder D3~10:1,50 EUR, D12~25:2,50 EUR, D30~40:3,50 EUR
Thread Locking Coating
SCBSJ
Bearings
Shaft
(Compact Type)SCSBS
Example
* Included set screws can be optionally changed to thread locking compound treated type. See Alterations below.
*D3 ~D25:C0.5 D30~D40:C1
6.325
b
2–M
±0.1 b±0.1
*
0.02 A ±0.1
2–C
*2–C
b/2
D
A A
+0.
05+
0.01
D+
0.05
+0.
01
D±
0.1
6.3
6.3
6.3
6.3 6.3
*
0.02 A B1±0.1
2–C
*2–C
b/2
6.3
6.36.
3
1
D±
0.1
1
B
–0.20
Ds
–0.20
Ds
Short Shoulder Type Long Shoulder Type
-2531 -2541
Shaft Collars -For Bearing Fixing-
-Clamp Type-
Shaft Collars -For Bearing Fixing- (Space-saving design)
-Compact Slit Type-
QClamp Type QSlit Compact Type
6.325
±0.1±
0.1
1
0.02 A
+0.
01+
0.05
–0.20
A
B
b
R R
b/2
D Ds
D
+0.
01+
0.05
D
6.3
6.3
6.36.3
*2-C
*2-C
±0.1
±0.1
±0.
11
0.02 A
–0.20
B
b±0.1b
R
b/2
D Ds
6.3
6.3
*2-C
*2-C
A
2XR2XR
1
M d
Y
W
XZ
Short Shoulder Type Long Shoulder Type
*D3 ~D25:C0.5D30~D50:C1
M W
XZ
Yd
6.325
±0.1
±0.
11
0.02 A
+0.
01+
0.05
–0.20
A
B
R
b/2
D Ds
D
6.3
6.3
6.3
*2-C
*2-C
±0.1b
2XR
R+0.
01+
0.05
D 6.3
±0.1
±0.1
±0.
11
0.02 A
–0.20
B
b
b/2
D Ds
6.3
6.3
*2-C
*2-C
A
2XR
1
Short Shoulder Type Long Shoulder Type
*D8 ~D25:C0.5D30~D40:C1
Part Number - Ds
SCSBN10 - 14Order Example
D P.87DaysDays to Ship
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Price
Part Number - Ds
SCBNJ10
- 14Order Example
(SCSBN)Shaft Collar
(BGCC)Bearing with Housing
Example
D P.87Days
to Ship
Days
CAD Data CAD Data
QVolume Discount (ERound down to one Cent.) P.87- SCSNAB · SCSLABQuantity 1~29 30~39 40~49 50~99
Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard
- SCSBN · PSCSBN
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
- Others
EFor orders larger than indicated quantity, please request a quotation.
Price
QFeatures: Less shaft damage from tightening than the Set Screw Flat Type (P.251). QFeatures: Smaller by up to 32% in width (B dim.) and 14% in outer diameter (D1 dim.) than the Clamp Type (P.253).
Type MMaterial
SSurface Treatment
AAccessoryShort Shoulder Long Shoulder
SCBNJ SCLSJ1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCBNJ PSCLSJ Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCBNJ SSCLSJ 1.4301/X5CrNi18-10 -
Type MMaterial
SSurface Treatment
AAccessoryShort Shoulder Long Shoulder
SCSBN SCSLS1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCSBN PSCSLS Electroless Nickel PlatingHexagon Socket Head Cap Screw
1 pc.
(JIS SUS)
SSCSBN SSCSLS 1.4301/ -
SCSNAW SCSLAW EN AW-2017/AICu4MgSi
Clear Anodize
SCSNAB SCSLAB Black Anodize
EPrices in ( ) are for Long Shoulder Type only.
Part NumberDs
SelectableApplicable Bearing (O.D.) B B1 D1
M(Coarse Thread)
b d R W X Y Z
€ Unit Price
Type DSCSBNSCSLS
PSCSBNPSCSLS
SSCSBNSSCSLS
SCSNAWSCSLAW
SCSNABSCSLAB
(Short Shoulder Type)
SCSBNPSCSBNSSCSBNSCSNAWSCSNAB
(Long Shoulder Type)
SCSLSPSCSLSSSCSLSSCSLAWSCSLAB
35 673ZZ (6) ∙ 683ZZ (8)
9 12
16
M3 8 3.4 3 1.0
4.5 2.2 3 ~56 693ZZ (8) ∙ 603ZZ (9) ∙ 623ZZ (10)8 633ZZ (13)
46 674ZZ (7) ∙ 684ZZ (9)
18 5 3 3.5~67 694ZZ (11) ∙ 604ZZ (12) ∙ 624ZZ (13)9 634ZZ (16)
57 675ZZ (7)
20
5.5
4
5~6.58 685ZZ (11) ∙ 695ZZ (13) ∙ 605ZZ (14) ∙ 625ZZ (16)10 635ZZ (19)
68 676ZZ (10) ∙ 686ZZ (13)
6 6~6.5*9 696ZZ (15) ∙ 606ZZ (17) ∙ 626ZZ (19)12 636ZZ (22)
811 678ZZ (15) ∙ 688ZZ (16)
11.5 14
25
M4 10 4.5 3.75
1.5
7
5
7~9*12 698ZZ (19) ∙ 608ZZ (22) ∙ 628ZZ (24)14 638ZZ (28)
10
12 6700ZZ (15)
30
9 10*13 6800ZZ (19)*14 6900ZZ (22) ∙ 6000ZZ (26)16 6200ZZ (30) ∙ 6300ZZ (35)
12
14 6701ZZ (18)
10 1015 6801ZZ (21)*16 6901ZZ (24) ∙ 6001ZZ (28)*18 6201ZZ (32) ∙ 6301ZZ (37)
15
17 6702ZZ (21)
34 11.5 6 12
*18 6802ZZ (24) ∙ 6902ZZ (28)*19 6002ZZ (32)*21 6202ZZ (35) ∙ 6302ZZ (42)
1720 6803ZZ (26)
*21 6903ZZ (30) ∙ 6003ZZ (35)*23 6203ZZ (40) ∙ 6303ZZ (47)
20
23 6704ZZ (27) ∙ 6804ZZ (32)
14 17
40
M5 12 5.5 4.5
14 7 14*24 6904ZZ (37)*27 6004ZZ (42) ∙ 6204ZZ (47)28 6304ZZ (52)
25
28 6805ZZ (37)
45 17
10
17*29 6905ZZ (42)*31 6005ZZ (47)*32 6205ZZ (52)33 6305ZZ (62)
3033 6806ZZ (42)
17.5 21
55
M6
15
6.6 6
2.0
20 1835 6906ZZ (47)*38 6006ZZ (55) ∙ 6206ZZ (62) ∙ 6306ZZ (72)
35
38 6807ZZ (47)
60 23 12 2141 6907ZZ (55)*43 6007ZZ (62) ∙ 6207ZZ (72)45 6307ZZ (80)
40
43 6808ZZ (52)
70 M8 9 7 26 13 2345 6908ZZ (62)*48 6008ZZ (68) ∙ 6208ZZ (80)50 6308ZZ (90)
5055 6910ZZ (72) 22.5 26 85 M10 20 11 9 3.0 32 16 2857 6010ZZ (80)
Part NumberDs
SelectableApplicable Bearing (O.D.) B B1 D1
M(Coarse Thread)
b d R W X Y Z
€ Unit Price
Type DSCBNJSCLSJ
PSCBNJPSCLSJ
SSCBNJSSCLSJ
(Short Shoulder Type)
SCBNJPSCBNJSSCBNJ
(Long Shoulder Type)
SCLSJPSCLSJSSCLSJ
811 678ZZ (12) ∙ 688ZZ (16)
9
12
22
M3 8 3.5 3
1.5
7
4
712 698ZZ (19) ∙ 608ZZ (22) ∙ 628ZZ (24)
10
13 6800ZZ (19)
9.5
25
8
9
14 6900ZZ (22) ∙ 6000ZZ (26)
16 6200ZZ (30) ∙ 6300ZZ (35)
12
15 6801ZZ (21)
9
3
16 6901ZZ (24) ∙ 6001ZZ (28)
18 6201ZZ (32) ∙ 6301ZZ (37)
15
18 6802ZZ (24) ∙ 6902ZZ (28)
30
11 1119 6002ZZ (32)
21 6202ZZ (35) ∙ 6302ZZ (42)
1721 6903ZZ (30) ∙ 6003ZZ (35)
11.5 4 1223 6203ZZ (40) ∙ 6303ZZ (47)
20
23 6704ZZ (27) ∙ 6804ZZ (32)
13 36 13
5
1324 6904ZZ (37)
27 6004ZZ (42) ∙ 6204ZZ (47)
25
28 6805ZZ (37)
11.5 15 42 M4 10 4.5 3.75 16.5 16.529 6905ZZ (42)
31 6005ZZ (47)
32 6205ZZ (52)
3035 6906ZZ (47)
14 18
50
M5 12 5.5 4.5
20
6
2038 6006ZZ (55) ∙ 6206ZZ (62) ∙ 6306ZZ (72)
3541 6907ZZ (55)
55
2
22.5 2143 6007ZZ (62) ∙ 6207ZZ (72)
4045 6908ZZ (62)
60 25 2348 6008ZZ (68) ∙ 6208ZZ (80)
6
6
2 Days
( Aluminum collars are available for * marked D dimensions only.)
-2531 -2541
Shaft Collars -For Bearing Fixing-
-Clamp Type-
Shaft Collars -For Bearing Fixing- (Space-saving design)
-Compact Slit Type-
QClamp Type QSlit Compact Type
6.325
±0.1
±0.
11
0.02 A
+0.
01+
0.05
–0.20
A
B
b
R R
b/2
D Ds
D
+0.
01+
0.05
D
6.3
6.3
6.36.3
*2-C
*2-C
±0.1
±0.1
±0.
11
0.02 A
–0.20
B
b±0.1b
R
b/2
D Ds
6.3
6.3
*2-C
*2-C
A
2XR2XR
1
M d
Y
W
XZ
Short Shoulder Type Long Shoulder Type
*D3 ~D25:C0.5D30~D50:C1
M W
XZ
Yd
6.325
±0.1±
0.1
1
0.02 A
+0.
01+
0.05
–0.20
A
B
R
b/2
D Ds
D
6.3
6.3
6.3
*2-C
*2-C
±0.1b
2XR
R+0.
01+
0.05
D 6.3
±0.1
±0.1
±0.
11
0.02 A
–0.20
B
b
b/2
D Ds
6.3
6.3
*2-C
*2-C
A
2XR
1
Short Shoulder Type Long Shoulder Type
*D8 ~D25:C0.5D30~D40:C1
Part Number - Ds
SCSBN10 - 14Order Example
D P.87DaysDays to Ship
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Price
Part Number - Ds
SCBNJ10
- 14Order Example
(SCSBN)Shaft Collar
(BGCC)Bearing with Housing
Example
D P.87Days
to Ship
Days
CAD Data CAD Data
QVolume Discount (ERound down to one Cent.) P.87- SCSNAB · SCSLABQuantity 1~29 30~39 40~49 50~99
Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard
- SCSBN · PSCSBN
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
- Others
EFor orders larger than indicated quantity, please request a quotation.
Price
QFeatures: Less shaft damage from tightening than the Set Screw Flat Type (P.251). QFeatures: Smaller by up to 32% in width (B dim.) and 14% in outer diameter (D1 dim.) than the Clamp Type (P.253).
Type MMaterial
SSurface Treatment
AAccessoryShort Shoulder Long Shoulder
SCBNJ SCLSJ1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCBNJ PSCLSJ Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCBNJ SSCLSJ 1.4301/X5CrNi18-10 -
Type MMaterial
SSurface Treatment
AAccessoryShort Shoulder Long Shoulder
SCSBN SCSLS1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCSBN PSCSLS Electroless Nickel PlatingHexagon Socket Head Cap Screw
1 pc.
(JIS SUS)
SSCSBN SSCSLS 1.4301/ -
SCSNAW SCSLAW EN AW-2017/AICu4MgSi
Clear Anodize
SCSNAB SCSLAB Black Anodize
EPrices in ( ) are for Long Shoulder Type only.
Part NumberDs
SelectableApplicable Bearing (O.D.) B B1 D1
M(Coarse Thread)
b d R W X Y Z
€ Unit Price
Type DSCSBNSCSLS
PSCSBNPSCSLS
SSCSBNSSCSLS
SCSNAWSCSLAW
SCSNABSCSLAB
(Short Shoulder Type)
SCSBNPSCSBNSSCSBNSCSNAWSCSNAB
(Long Shoulder Type)
SCSLSPSCSLSSSCSLSSCSLAWSCSLAB
35 673ZZ (6) ∙ 683ZZ (8)
9 12
16
M3 8 3.4 3 1.0
4.5 2.2 3 ~56 693ZZ (8) ∙ 603ZZ (9) ∙ 623ZZ (10)8 633ZZ (13)
46 674ZZ (7) ∙ 684ZZ (9)
18 5 3 3.5~67 694ZZ (11) ∙ 604ZZ (12) ∙ 624ZZ (13)9 634ZZ (16)
57 675ZZ (7)
20
5.5
4
5~6.58 685ZZ (11) ∙ 695ZZ (13) ∙ 605ZZ (14) ∙ 625ZZ (16)10 635ZZ (19)
68 676ZZ (10) ∙ 686ZZ (13)
6 6~6.5*9 696ZZ (15) ∙ 606ZZ (17) ∙ 626ZZ (19)12 636ZZ (22)
811 678ZZ (15) ∙ 688ZZ (16)
11.5 14
25
M4 10 4.5 3.75
1.5
7
5
7~9*12 698ZZ (19) ∙ 608ZZ (22) ∙ 628ZZ (24)14 638ZZ (28)
10
12 6700ZZ (15)
30
9 10*13 6800ZZ (19)*14 6900ZZ (22) ∙ 6000ZZ (26)16 6200ZZ (30) ∙ 6300ZZ (35)
12
14 6701ZZ (18)
10 1015 6801ZZ (21)*16 6901ZZ (24) ∙ 6001ZZ (28)*18 6201ZZ (32) ∙ 6301ZZ (37)
15
17 6702ZZ (21)
34 11.5 6 12
*18 6802ZZ (24) ∙ 6902ZZ (28)*19 6002ZZ (32)*21 6202ZZ (35) ∙ 6302ZZ (42)
1720 6803ZZ (26)
*21 6903ZZ (30) ∙ 6003ZZ (35)*23 6203ZZ (40) ∙ 6303ZZ (47)
20
23 6704ZZ (27) ∙ 6804ZZ (32)
14 17
40
M5 12 5.5 4.5
14 7 14*24 6904ZZ (37)*27 6004ZZ (42) ∙ 6204ZZ (47)28 6304ZZ (52)
25
28 6805ZZ (37)
45 17
10
17*29 6905ZZ (42)*31 6005ZZ (47)*32 6205ZZ (52)33 6305ZZ (62)
3033 6806ZZ (42)
17.5 21
55
M6
15
6.6 6
2.0
20 1835 6906ZZ (47)*38 6006ZZ (55) ∙ 6206ZZ (62) ∙ 6306ZZ (72)
35
38 6807ZZ (47)
60 23 12 2141 6907ZZ (55)*43 6007ZZ (62) ∙ 6207ZZ (72)45 6307ZZ (80)
40
43 6808ZZ (52)
70 M8 9 7 26 13 2345 6908ZZ (62)*48 6008ZZ (68) ∙ 6208ZZ (80)50 6308ZZ (90)
5055 6910ZZ (72) 22.5 26 85 M10 20 11 9 3.0 32 16 2857 6010ZZ (80)
Part NumberDs
SelectableApplicable Bearing (O.D.) B B1 D1
M(Coarse Thread)
b d R W X Y Z
€ Unit Price
Type DSCBNJSCLSJ
PSCBNJPSCLSJ
SSCBNJSSCLSJ
(Short Shoulder Type)
SCBNJPSCBNJSSCBNJ
(Long Shoulder Type)
SCLSJPSCLSJSSCLSJ
811 678ZZ (12) ∙ 688ZZ (16)
9
12
22
M3 8 3.5 3
1.5
7
4
712 698ZZ (19) ∙ 608ZZ (22) ∙ 628ZZ (24)
10
13 6800ZZ (19)
9.5
25
8
9
14 6900ZZ (22) ∙ 6000ZZ (26)
16 6200ZZ (30) ∙ 6300ZZ (35)
12
15 6801ZZ (21)
9
3
16 6901ZZ (24) ∙ 6001ZZ (28)
18 6201ZZ (32) ∙ 6301ZZ (37)
15
18 6802ZZ (24) ∙ 6902ZZ (28)
30
11 1119 6002ZZ (32)
21 6202ZZ (35) ∙ 6302ZZ (42)
1721 6903ZZ (30) ∙ 6003ZZ (35)
11.5 4 1223 6203ZZ (40) ∙ 6303ZZ (47)
20
23 6704ZZ (27) ∙ 6804ZZ (32)
13 36 13
5
1324 6904ZZ (37)
27 6004ZZ (42) ∙ 6204ZZ (47)
25
28 6805ZZ (37)
11.5 15 42 M4 10 4.5 3.75 16.5 16.529 6905ZZ (42)
31 6005ZZ (47)
32 6205ZZ (52)
3035 6906ZZ (47)
14 18
50
M5 12 5.5 4.5
20
6
2038 6006ZZ (55) ∙ 6206ZZ (62) ∙ 6306ZZ (72)
3541 6907ZZ (55)
55
2
22.5 2143 6007ZZ (62) ∙ 6207ZZ (72)
4045 6908ZZ (62)
60 25 2348 6008ZZ (68) ∙ 6208ZZ (80)
6
6
2 Days
( Aluminum collars are available for * marked D dimensions only.)
-2551 -2561
Shaft Collars -With Thread Insert- (Lightweight)
-Resin Type / Aluminum Type-
Shaft Collars -Male Thread Bore-
-Set Screw Type / Clamp Type-
QPlastic Type
QAluminum Type
Part NumberB D1 d
M(Coarse Thread)
R W X Y€ Unit Price
Type D SCSPO
No Thread Inserts(Clamp Type)
SCSPO
10
±0.1
1228
4.5 M4 3.75
1.5
9 512 30 10 61315
15
40
5.5 M5
4.5 13 81620 49
516
25 54 20 630 60 21.5 8
6.325
B/2B
md
2-M
30°
1
±0.1
6.3
6.3
C
2-C
D±
0.1
1
QSet Screw Flat Type Type MMaterial
SSurface Treatment
AAccessoryFine Thread Coarse Thread
SCCNS SCCNN1.1191/C45E
Black Oxide Coating 2 Set Screws / 2 Set Pieces (Copper Alloy)PSCCNS PSCCNN Electroless Nickel Plating 2 Set Screws / 2 Set Pieces
(JIS SUS) (Copper Alloy)SSCCNS SSCCNN 1.4301/X5CrNi18-10 -
QClamp Type6.325
R
m
B/2
2xRM dYW
XZ
2-C*
6.3
6.3
D1±
0.1
B±0.1* m3 ~m8 :C0.5m10~m30:C1
Type MMaterial
SSurface Treatment
AAccessoryFine Thread Coarse Thread
SCSN SCSNN1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.PSCSN PSCSNN Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.
(JIS SUS)SSCSN SSCSNN 1.4301/X5CrNi18-10 -
6.3
A
0.05 A
1±
0.1
±0.1B
D
D
M (With Insert Type)
M (No Insert Type)d
Y
W
X
2-C
2-C*
B/2*
R
2xR
B/2
1D
±0.
1
±0.1
2-R
B2xR
D
2-C*
2-C*
XX
2-d2-M(With Insert Type)
Y
W
*D8~D25:C0.5 D30:C1
Clamp Type Split Type
Part Number - B
SCSPH12SCSPP12SCSAH20 - 10
Order Example
D P.87DaysDays to Ship
QFeatures: Aluminum or plastic collars are lighter than those of steel or stainless steel. Collars with thread inserts have improved screw thread strength.
Part Number
SCCNS20Order
Example
D P.87DaysDays
to Ship SCCN
SCCNS
(P.237)
Bear ing Hous ingBear ings
Shaf tExample
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.Price
A
0.02 A
1±
0.1
±0.1B
D D
2-C
2-C*
M (With Insert Type) (d)
Y
W
XZ
B/2*
R
2xR
B/21
D±
0.1
±0.1
2-R
B2xR
D
2-C*
2-C*
XX
2- (d)2-M(With Insert Type)
Y
W
6.325
6.3
6.3
6.3
6.3
6.3 6.
3
+0.
05+
0.01
+0.
05+
0.01
*D8~D25:C0.5 D30:C1
Clamp Type Split Type
Type MMaterial
ColorOperating Ambient
Temp.A
AccessoryThread Inserts
MaterialClamp Type Split Type
SCSPH SCSPP Polyacetal White -45°C~95°C Hexagon Socket Head Cap Screw (JIS SUS)
Clamp Type: 1 pc.Split Type: 2 pcs.
1.4301/X5CrNi18-10SCSMH SCSPM MC Nylon Ivory -40°C~120°C
SCSPO - Polyacetal White -45°C~95°C Not provided
Type MMaterial
SSurface Treatment
AAccessory
Thread Inserts MaterialClamp Type Split Type
SCSAH SCNPAH EN AW-2017/AICu4MgSi -
Hexagon Socket Head Cap Screw (JIS SUS)Clamp Type: 1 pc.Split Type: 2 pcs.
1.4301/X5CrNi18-10
E(d) bore surface will have threads from installing the inserts.
Part Number BSelectable
D1M
(Coarse Thread)(d) R W X Y Z
€ Unit PriceType D SCSAH SCNPAH
With Thread Inserts
(Clamp Type)
SCSAH(Split Type)
SCNPAH
8 8 25 M3 3.2 3
1.5
75
710
10
30 M4 4.2 3.759 8
12 10 915 34 11.5 6 1016 35
M5 5.3 4.512 11
20 40 14 7 1325 12 45 17 1630 15 55 M6 6.3 6 20 10 18
Part Number B mxPitch
D1 d1 CSet ScrewM x Length
€ Unit Price
Type No.(Fine
Thread)(Coarse Thread)
(Fine Thread)(Coarse Thread)
SCCNSSCCNN
PSCCNSPSCCNN
SSCCNSSSCCNN
(Fine Thread Type)
SCCNSPSCCNSSSCCNS
(Coarse Thread Type)
SCCNNPSCCNNSSCCNN(* marked sizes are applicable to Fine Thread Type only.)
*3
6
- M3x0.35 - 7 4.5
0.2
M3x34
6M4x0.5 M4x0.7 8 5.5
5 M5x0.5 M5x0.8 11 10
M4x36
10M6x0.75 M6x1.0 12 11
8
8M8x0.75 M8x1.25 14 12
10 M10x0.75 M10x1.516 13
*10A - M10x1.0 -12
10
10 M12x1.0 M12x1.75 20 15
0.5
M5x4*15 - M15x1.0 - 24 2016
12M16x1.0 M16x2.0 26 22
M6x520 M20x1.0 M20x2.5 32 27*25 12 - M25x1.5 - 38 3130 15 15 M30x1.5 M30x3.5 46 38 1 M8x6
Part Number
B
mxPitch
D1
M(Coarse Thread)
d R W
X
Y Z
€ Unit Price
Type No.(Fine
Thread)(Coarse Thread)
(Fine Thread)
(Coarse Thread)
SCSNSCSNN
PSCSNPSCSNN
SSCSNSSCSNN
(Fine Thread Type)
SCSNPSCSNSSCSN
(Coarse Thread Type)
SCSNNPSCSNNSSCSNN
3
8M3x0.35 M3x0.5 16
M3 3.4 31.0E
4.5 4.5 2.2 3~54 M4x0.5 M4x0.7 18 5 5 3 3.5~65 M5x0.5 M5x0.8
205.5 5.5
45~6.5
6
10
M6x0.75 M6x1.0
M4 4.5 3.75
6 6 6~6.58 M8x0.75 M8x1.25
25
1.5
88
5
8~9*8A M8x1.0 - -10 M10x0.75 M10x1.5
309
910*10A M10x1.0
- -*10B M10x1.2512 M12x1.0 M12x1.75
1010
9~10*12A M12x1.25
- -*14
12
M14x1.5 34
M5 5.5 4.5
11.5
6
10~1116 M16x1.0 M16x2.0
3512 12.5
11~12*16A M16x1.5
-12.5
-*18 M18x1.5
40 1412~13
20 M20x1.0 M20x2.5 14
7
13*20A M20x1.5
- -*22
15
M22x1.545
M6 6.6 617
14~1524** - M24x3.0 17
16*25 M25x1.5
- -*27 M27x1.5
55 208 17~20
30 M30x1.5 M30x3.5 20 10 18~20
E* marked sizes are applicable to Fine Thread Type only.E** marked size in No. is applicable to Coarse Thread Type only. EW dimension of Coarse Thread Type No.5 is 1.5.
CAD Data CAD Data
Part NumberB D1
M(Coarse Thread)
d R W X Y€ Unit Price
Type DClamp Type Split Type
SCSPH SCSMH SCSPP SCSPM
With Thread Inserts(Clamp Type)
SCSPHSCSMH
(Split Type)
SCSPPSCSPM
8
±0.2
8 25 M3 3.4 3
1.5
7510 10 30 M4 4.5 3.75 9
12 1015 12 35 M5 5.5 4.5 12 61620 45
M6 6.6 615 8
25 15 50 18 1030 55 20
EThe halves must remain in the same orientation as shipped when in use.
QVolume Discount (ERound down to one Cent.) P.87- Except Those Shown Below
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~9 10~19 20~39 40~99Discount Rate € Unit Price 20% 30% 40%Days to Ship Standard To be quoted
- SCSNN/SSCSNN
EFor orders larger than indicated quantity, please request a quotation.
Price6
6
Up to 46%
2 Days
-2551 -2561
Shaft Collars -With Thread Insert- (Lightweight)
-Resin Type / Aluminum Type-
Shaft Collars -Male Thread Bore-
-Set Screw Type / Clamp Type-
QPlastic Type
QAluminum Type
Part NumberB D1 d
M(Coarse Thread)
R W X Y€ Unit Price
Type D SCSPO
No Thread Inserts(Clamp Type)
SCSPO
10
±0.1
1228
4.5 M4 3.75
1.5
9 512 30 10 61315
15
40
5.5 M5
4.5 13 81620 49
516
25 54 20 630 60 21.5 8
6.325
B/2B
md
2-M
30°
1
±0.1
6.3
6.3
C
2-C
D±
0.1
1
QSet Screw Flat Type Type MMaterial
SSurface Treatment
AAccessoryFine Thread Coarse Thread
SCCNS SCCNN1.1191/C45E
Black Oxide Coating 2 Set Screws / 2 Set Pieces (Copper Alloy)PSCCNS PSCCNN Electroless Nickel Plating 2 Set Screws / 2 Set Pieces
(JIS SUS) (Copper Alloy)SSCCNS SSCCNN 1.4301/X5CrNi18-10 -
QClamp Type6.325
R
mB/2
2xRM dYW
XZ
2-C*6.
3
6.3
D1±
0.1
B±0.1* m3 ~m8 :C0.5m10~m30:C1
Type MMaterial
SSurface Treatment
AAccessoryFine Thread Coarse Thread
SCSN SCSNN1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.PSCSN PSCSNN Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.
(JIS SUS)SSCSN SSCSNN 1.4301/X5CrNi18-10 -
6.3
A
0.05 A
1±
0.1
±0.1B
D
D
M (With Insert Type)
M (No Insert Type)d
Y
W
X
2-C
2-C*
B/2*
R
2xR
B/2
1D
±0.
1
±0.1
2-R
B2xR
D
2-C*
2-C*
XX
2-d2-M(With Insert Type)
Y
W
*D8~D25:C0.5 D30:C1
Clamp Type Split Type
Part Number - B
SCSPH12SCSPP12SCSAH20 - 10
Order Example
D P.87DaysDays to Ship
QFeatures: Aluminum or plastic collars are lighter than those of steel or stainless steel. Collars with thread inserts have improved screw thread strength.
Part Number
SCCNS20Order
Example
D P.87DaysDays
to Ship SCCN
SCCNS
(P.237)
Bear ing Hous ingBear ings
Shaf tExample
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.Price
A
0.02 A
1±
0.1
±0.1B
D D
2-C
2-C*
M (With Insert Type) (d)
Y
W
XZ
B/2*
R
2xR
B/2
1D
±0.
1
±0.1
2-R
B2xR
D
2-C*
2-C*
XX
2- (d)2-M(With Insert Type)
Y
W
6.325
6.3
6.3
6.3
6.3
6.3 6.
3
+0.
05+
0.01
+0.
05+
0.01
*D8~D25:C0.5 D30:C1
Clamp Type Split Type
Type MMaterial
ColorOperating Ambient
Temp.A
AccessoryThread Inserts
MaterialClamp Type Split Type
SCSPH SCSPP Polyacetal White -45°C~95°C Hexagon Socket Head Cap Screw (JIS SUS)
Clamp Type: 1 pc.Split Type: 2 pcs.
1.4301/X5CrNi18-10SCSMH SCSPM MC Nylon Ivory -40°C~120°C
SCSPO - Polyacetal White -45°C~95°C Not provided
Type MMaterial
SSurface Treatment
AAccessory
Thread Inserts MaterialClamp Type Split Type
SCSAH SCNPAH EN AW-2017/AICu4MgSi -
Hexagon Socket Head Cap Screw (JIS SUS)Clamp Type: 1 pc.Split Type: 2 pcs.
1.4301/X5CrNi18-10
E(d) bore surface will have threads from installing the inserts.
Part Number BSelectable
D1M
(Coarse Thread)(d) R W X Y Z
€ Unit PriceType D SCSAH SCNPAH
With Thread Inserts
(Clamp Type)
SCSAH(Split Type)
SCNPAH
8 8 25 M3 3.2 3
1.5
75
710
10
30 M4 4.2 3.759 8
12 10 915 34 11.5 6 1016 35
M5 5.3 4.512 11
20 40 14 7 1325 12 45 17 1630 15 55 M6 6.3 6 20 10 18
Part Number B mxPitch
D1 d1 CSet ScrewM x Length
€ Unit Price
Type No.(Fine
Thread)(Coarse Thread)
(Fine Thread)(Coarse Thread)
SCCNSSCCNN
PSCCNSPSCCNN
SSCCNSSSCCNN
(Fine Thread Type)
SCCNSPSCCNSSSCCNS
(Coarse Thread Type)
SCCNNPSCCNNSSCCNN(* marked sizes are applicable to Fine Thread Type only.)
*3
6
- M3x0.35 - 7 4.5
0.2
M3x34
6M4x0.5 M4x0.7 8 5.5
5 M5x0.5 M5x0.8 11 10
M4x36
10M6x0.75 M6x1.0 12 11
8
8M8x0.75 M8x1.25 14 12
10 M10x0.75 M10x1.516 13
*10A - M10x1.0 -12
10
10 M12x1.0 M12x1.75 20 15
0.5
M5x4*15 - M15x1.0 - 24 2016
12M16x1.0 M16x2.0 26 22
M6x520 M20x1.0 M20x2.5 32 27*25 12 - M25x1.5 - 38 3130 15 15 M30x1.5 M30x3.5 46 38 1 M8x6
Part Number
B
mxPitch
D1
M(Coarse Thread)
d R W
X
Y Z
€ Unit Price
Type No.(Fine
Thread)(Coarse Thread)
(Fine Thread)
(Coarse Thread)
SCSNSCSNN
PSCSNPSCSNN
SSCSNSSCSNN
(Fine Thread Type)
SCSNPSCSNSSCSN
(Coarse Thread Type)
SCSNNPSCSNNSSCSNN
3
8M3x0.35 M3x0.5 16
M3 3.4 31.0E
4.5 4.5 2.2 3~54 M4x0.5 M4x0.7 18 5 5 3 3.5~65 M5x0.5 M5x0.8
205.5 5.5
45~6.5
6
10
M6x0.75 M6x1.0
M4 4.5 3.75
6 6 6~6.58 M8x0.75 M8x1.25
25
1.5
88
5
8~9*8A M8x1.0 - -10 M10x0.75 M10x1.5
309
910*10A M10x1.0
- -*10B M10x1.2512 M12x1.0 M12x1.75
1010
9~10*12A M12x1.25
- -*14
12
M14x1.5 34
M5 5.5 4.5
11.5
6
10~1116 M16x1.0 M16x2.0
3512 12.5
11~12*16A M16x1.5
-12.5
-*18 M18x1.5
40 1412~13
20 M20x1.0 M20x2.5 14
7
13*20A M20x1.5
- -*22
15
M22x1.545
M6 6.6 617
14~1524** - M24x3.0 17
16*25 M25x1.5
- -*27 M27x1.5
55 208 17~20
30 M30x1.5 M30x3.5 20 10 18~20
E* marked sizes are applicable to Fine Thread Type only.E** marked size in No. is applicable to Coarse Thread Type only. EW dimension of Coarse Thread Type No.5 is 1.5.
CAD Data CAD Data
Part NumberB D1
M(Coarse Thread)
d R W X Y€ Unit Price
Type DClamp Type Split Type
SCSPH SCSMH SCSPP SCSPM
With Thread Inserts(Clamp Type)
SCSPHSCSMH
(Split Type)
SCSPPSCSPM
8
±0.2
8 25 M3 3.4 3
1.5
7510 10 30 M4 4.5 3.75 9
12 1015 12 35 M5 5.5 4.5 12 61620 45
M6 6.6 615 8
25 15 50 18 1030 55 20
EThe halves must remain in the same orientation as shipped when in use.
QVolume Discount (ERound down to one Cent.) P.87- Except Those Shown Below
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Quantity 1~9 10~19 20~39 40~99Discount Rate € Unit Price 20% 30% 40%Days to Ship Standard To be quoted
- SCSNN/SSCSNN
EFor orders larger than indicated quantity, please request a quotation.
Price6
6
Up to 46%
2 Days
-2571 -2581
Shaft Collars -Hinged / One Touch-
-Hinged Type / One Touch Standard Type / One Touch Mount Hole Type-
Shaft Collars -With Key Escapement Groove-
-Set Screw Type / Clamp Type-
QHinged Type
QFeature: Compared with conventional shaft collars, hinged structure enables easy fitting and removal in limited work space. Washer fitted onto hexagon socket head cap screw reduces the chances of the screw falling out when the collar is removed from the shaft.
QOne Touch Type
6
5
-0.3
15D
30
d
00
±0.1
+0.
1
6.3 6.36.3 C1
Lever Operating Direction
Identification Groove
2-C0.5
Work Contact Surface
H
8M4 Screw
2-M1
PH
8
7.5
M4 Screw
7.5
Standard Type
Mount Hole Type
*Lever: Material 1.1191/C45E / Surface Treatment 45HRC - Tuftride(R)
Spring: Material JIS SWP-A
EFemale Thread holes are not anodized.
TypeM
MaterialSSurface Treatment
AAccessory
WSC EN AW-2017/AlCu4MgSi
Clear AnodizeHexagon Socket Head Cap Screw
1 pc.(JIS SUS)
WSCMWSCB Black Anodize
SCSH
Example
QFeatures
- The lever pressed by the spring gives consistent pressure on the shaft.
- Shaft collar can be easily removed by moving the lever down with a finger.- Shafts do not require any flat alterations to secure the collar as in the
case with Set Screws and can be clamped without damage.- Working time can be reduced for frequent collar mounting / removal.- Suitable for use in holding spools of material such as paper, film, metal
foil, etc., and for uses in applications where there is no load on the collars.
Material Release Direction
One-touch TypeOne-touch Type
Material Release DirectionShaft Collar
WSC
Shaft Collar
One-touch TypeMaterial Roll
<WSC/WSCB/WSCM>(1) Vertical Use (2) Horizontal Use (3)Never use this collar in directions where loads apply.Example
Part Number
SCSH10WSCB16
Order Example
D P.87DaysDays to Ship
QSet Screw Flat
Type
QClamp Type
6.325
2-M
b+0.2
0
Z+0
.20
B/2
B
30˚
d 1
±0.1
*
6.3
6.3
6.3
A
0.02 A
C
*2-C
D+
0.05
+0.
01
Shaft
Shaft Collar
Parallel Key
Key Escapement Groove
D1±
0.1
*D10~D25:C0.5 D30:C1
25 6.3
6.3
A
0.02 A
1±
0.1
+0.
01+
0.05
0+0.2
±0.1
R
B
2xR
D D
M d
Y
W
XZ
6.3
6.3
2-C
2-C*
*B/2b
Shaft
Shaft Collar
Parallel Key
Key Escapement Groove
*D10~D25:C0.5 D30:C1
Part Number - B
SCKS12 SCSKS10
--
1010
Order Example
D P.87DaysDays to Ship
SCSKS
Example
QVolume Discount Rate (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49 50~99Discount Rate Unit Price 5% 10% 18%Days to Ship Standard To be quoted
E For orders larger than indicated quantity, please request a quotation.
Price
QFeature: The shaft key can escape through the groove b. (The Key Escapement Groove is not for key-locking the collar itself.)
25 6.3
2xR
6.3
B±0.1
W
B/2Y
X
D1
2-C0.5
2-C0.5
M
d
D+
0.1
0
6.3
Hinge:Spring PinsMaterial:Spring Stainless SteelJIS SSPSR (P.Q2 -251)
CAD Data CAD Data
- WSCB
EA Express Charge of 8,10 EUR for 3 or more identical pieces.
D P.88Express A 3,00 EUR/piece
8 Days
QVolume Discount (Eound down to one Cent.)P.87- Hinged Type
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
- One Touch Type
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Price
6 6
2 Days
TypeMain Body Hinge Spring Pins
Hexagon Socket Head Cap Screw
Washer
MMaterial SSurface Treatment MMaterialMMaterial HHardness MMaterial MMaterial
SCSH 1.1191/C45E Blackening Coating1.4301/
X5CrNi18-101.7220/
34CrMo4HRC42~48
1.4301/X5CrNi18-10 NylonWasher(1 pc.)
PSCSH 1.1191/C45E Electroless Nickel PlatingJIS SUS
SSCSH 1.4301/X5CrNi18-10 -
Part NumberB D1
M(Coarse Thread) d R W X Y
Hexagon Socket Head Cap Screw
M x Length
€ Unit Price
Type D SCSH PSCSH SSCSH
SCSHPSCSHSSCSH
1010 30 M4 5 3.75
1.5
95 M4x8
12 1015
1235
M56
4.512 6 M5x10
16
20 407
14 7 M5x1225
1550
M6 618
10 M6x1630 55 20
Part NumberD H P
M1 x
Depth€ Unit Price
Type d WSC WSCB WSCM
(Standard Type)
WSCWSCB
(Mount Hole Type)
WSCM
10 50 40 25
M4x812 52 42 2715 55 45 3016 56 46 3120 60 50 35
M5x1022 62 52 3725 65 55 40
25.4 65.4 55.4 40.430 70 60 45 M6x12
Type MMaterial SSurface Treatment AAccessory
SCKS1.1191/C45E
Blackening Coating 2 Set Screws
PSCKS Electroless Nickel Plating 2 Set Screws(JIS SUS)
Part Number BSelectable
D1 d1Set ScrewM x Length
b Z€ Unit Price
Type D SCKS PSCKS
SCKS
PSCKS
10 6 8 10 20 13 M4x3 3.5 712 8 10 22 15 M5x4 4.5 8.515 8 10 12 26 20 5.5 10.520 10 12 32 27 M6x5 6.5 13.525 12 15 38 31 8.5 16.530 15 20 46 38 M8x6 8.5 19.0
E The groove b is for shaft key to pass through the collar, not for use as a keyway.
Part Number BSelectable
D1M
(Coarse Thread)d R W X Y Z b
€ Unit PriceType D SCSKS PSCSKS
SCSKS
PSCSKS
1010 30 M4 4.5 3.75
1.5
9 5 7 3.512 M5 5.5 4.5
1015 35 M6 6.6 6 6
1210 30 M4 4.5 3.75 5 8.5 4.512 M5 5.5 4.515 35 M6 6.6 6 11
615
10 34 M4 4.5 3.75 11.510.5 5.512 35 M5 5.5 4.5 12
1540
M6 6.6 6 13 8
2010 M5 5.5 4.5 14 7 13.5 6.512 4.515 45 M6 6.6 6 15 8
2512 M5 5.5 4.5 17 7 16.5 8.515 50 M6 6.6 6 18 10
30 15 55 6 20 19
Type MMaterial SSurface Treatment AAccessory
SCSKS1.1191/C45E
Black oxide coating Hexagon Socket Head Cap Screw 1 pc.
PSCSKS Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc. (JIS SUS)
-2571 -2581
Shaft Collars -Hinged / One Touch-
-Hinged Type / One Touch Standard Type / One Touch Mount Hole Type-
Shaft Collars -With Key Escapement Groove-
-Set Screw Type / Clamp Type-
QHinged Type
QFeature: Compared with conventional shaft collars, hinged structure enables easy fitting and removal in limited work space. Washer fitted onto hexagon socket head cap screw reduces the chances of the screw falling out when the collar is removed from the shaft.
QOne Touch Type
6
5
-0.3
15D
30
d
00
±0.1
+0.
1
6.3 6.3
6.3 C1
Lever Operating Direction
Identification Groove
2-C0.5
Work Contact Surface
H
8M4 Screw
2-M1
PH
8
7.5
M4 Screw
7.5
Standard Type
Mount Hole Type
*Lever: Material 1.1191/C45E / Surface Treatment 45HRC - Tuftride(R)
Spring: Material JIS SWP-A
EFemale Thread holes are not anodized.
TypeM
MaterialSSurface Treatment
AAccessory
WSC EN AW-2017/AlCu4MgSi
Clear AnodizeHexagon Socket Head Cap Screw
1 pc.(JIS SUS)
WSCMWSCB Black Anodize
SCSH
Example
QFeatures
- The lever pressed by the spring gives consistent pressure on the shaft.
- Shaft collar can be easily removed by moving the lever down with a finger.- Shafts do not require any flat alterations to secure the collar as in the
case with Set Screws and can be clamped without damage.- Working time can be reduced for frequent collar mounting / removal.- Suitable for use in holding spools of material such as paper, film, metal
foil, etc., and for uses in applications where there is no load on the collars.
Material Release Direction
One-touch TypeOne-touch Type
Material Release DirectionShaft Collar
WSC
Shaft Collar
One-touch TypeMaterial Roll
<WSC/WSCB/WSCM>(1) Vertical Use (2) Horizontal Use (3)Never use this collar in directions where loads apply.Example
Part Number
SCSH10WSCB16
Order Example
D P.87DaysDays to Ship
QSet Screw Flat
Type
QClamp Type
6.325
2-M
b+0.2
0
Z+0
.20
B/2
B
30˚
d 1
±0.1
*
6.3
6.3
6.3
A
0.02 A
C
*2-C
D+
0.05
+0.
01
Shaft
Shaft Collar
Parallel Key
Key Escapement Groove
D1±
0.1
*D10~D25:C0.5 D30:C1
25 6.3
6.3
A
0.02 A
1±
0.1
+0.
01+
0.05
0+0.2
±0.1
R
B
2xR
D D
M d
Y
W
XZ
6.3
6.3
2-C
2-C*
*B/2b
Shaft
Shaft Collar
Parallel Key
Key Escapement Groove
*D10~D25:C0.5 D30:C1
Part Number - B
SCKS12 SCSKS10
--
1010
Order Example
D P.87DaysDays to Ship
SCSKS
Example
QVolume Discount Rate (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49 50~99Discount Rate Unit Price 5% 10% 18%Days to Ship Standard To be quoted
E For orders larger than indicated quantity, please request a quotation.
Price
QFeature: The shaft key can escape through the groove b. (The Key Escapement Groove is not for key-locking the collar itself.)
25 6.3
2xR
6.3
B±0.1
W
B/2
Y
X
D1
2-C0.5
2-C0.5
M
d
D+
0.1
0
6.3
Hinge:Spring PinsMaterial:Spring Stainless SteelJIS SSPSR (P.Q2 -251)
CAD Data CAD Data
- WSCB
EA Express Charge of 8,10 EUR for 3 or more identical pieces.
D P.88Express A 3,00 EUR/piece
8 Days
QVolume Discount (Eound down to one Cent.)P.87- Hinged Type
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
- One Touch Type
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Price
6 6
2 Days
TypeMain Body Hinge Spring Pins
Hexagon Socket Head Cap Screw
Washer
MMaterial SSurface Treatment MMaterialMMaterial HHardness MMaterial MMaterial
SCSH 1.1191/C45E Blackening Coating1.4301/
X5CrNi18-101.7220/
34CrMo4HRC42~48
1.4301/X5CrNi18-10 NylonWasher(1 pc.)
PSCSH 1.1191/C45E Electroless Nickel PlatingJIS SUS
SSCSH 1.4301/X5CrNi18-10 -
Part NumberB D1
M(Coarse Thread) d R W X Y
Hexagon Socket Head Cap Screw
M x Length
€ Unit Price
Type D SCSH PSCSH SSCSH
SCSHPSCSHSSCSH
1010 30 M4 5 3.75
1.5
95 M4x8
12 1015
1235
M56
4.512 6 M5x10
16
20 407
14 7 M5x1225
1550
M6 618
10 M6x1630 55 20
Part NumberD H P
M1 x
Depth€ Unit Price
Type d WSC WSCB WSCM
(Standard Type)
WSCWSCB
(Mount Hole Type)
WSCM
10 50 40 25
M4x812 52 42 2715 55 45 3016 56 46 3120 60 50 35
M5x1022 62 52 3725 65 55 40
25.4 65.4 55.4 40.430 70 60 45 M6x12
Type MMaterial SSurface Treatment AAccessory
SCKS1.1191/C45E
Blackening Coating 2 Set Screws
PSCKS Electroless Nickel Plating 2 Set Screws(JIS SUS)
Part Number BSelectable
D1 d1Set ScrewM x Length
b Z€ Unit Price
Type D SCKS PSCKS
SCKS
PSCKS
10 6 8 10 20 13 M4x3 3.5 712 8 10 22 15 M5x4 4.5 8.515 8 10 12 26 20 5.5 10.520 10 12 32 27 M6x5 6.5 13.525 12 15 38 31 8.5 16.530 15 20 46 38 M8x6 8.5 19.0
E The groove b is for shaft key to pass through the collar, not for use as a keyway.
Part Number BSelectable
D1M
(Coarse Thread)d R W X Y Z b
€ Unit PriceType D SCSKS PSCSKS
SCSKS
PSCSKS
1010 30 M4 4.5 3.75
1.5
9 5 7 3.512 M5 5.5 4.5
1015 35 M6 6.6 6 6
1210 30 M4 4.5 3.75 5 8.5 4.512 M5 5.5 4.515 35 M6 6.6 6 11
615
10 34 M4 4.5 3.75 11.510.5 5.512 35 M5 5.5 4.5 12
1540
M6 6.6 6 13 8
2010 M5 5.5 4.5 14 7 13.5 6.512 4.515 45 M6 6.6 6 15 8
2512 M5 5.5 4.5 17 7 16.5 8.515 50 M6 6.6 6 18 10
30 15 55 6 20 19
Type MMaterial SSurface Treatment AAccessory
SCSKS1.1191/C45E
Black oxide coating Hexagon Socket Head Cap Screw 1 pc.
PSCSKS Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc. (JIS SUS)
-2591 -2601
CAD Data
QStandard
Side Mount Hole Type
Shaft Collars -Standard Type with Clamp Lever / Compact Type with Clamp Lever-
-Clamp Type / D Cut Type / Side Mount Hole Type-
QFeature: Easy to change the clamp lever position as this collar does not require any clamping tools. Lever is selectable from Standard or Miniature Type.
QStandard
Clamp Type
QStandard
D Cut Type
QFeature: Smaller by up to 33% in width (B dim.) and 22% in outer diameter (D1 dim.) than the Standard Type with Clamp Lever (P.259).
QCompact
D Cut Type
QCompact
Side Mount Hole Type
Part Number - Lever Color
SCKL12SCDKJM16SCDKM10
---
BMS
Order Example
D P.87DaysDays to Ship
SCKM
SCDKL
Example
E Do not tighten the lever without inserting the shaft. The shaft collar may be deformed and become unusable.E Levers in ( ) are applicable to SSCDKJ_ and SSCJKJ_ (stainless steel products).E D1 Tolerance for D25 and 30 is ±0.3.E C (O.D./I.D. chamfers) will be 1.0 for D30.
D B D1 M M1 d P1 P2 (F) (N) Y1 Y2 R W X Y (Z) C S
8
12
28
5
M4 Depth 6
5.5
1810
0.5
12 710
5.5 1.5
9.5 5.5 11.5
5
5
10
-
12 3220 14
8.5 10.5 7.5 13
15 3412
10.512
11.5
8.5
13.5
16 36 22 16 11 12.5 14.5
20 42
M5 Depth 7.5
25 14 18 14 14 15.5 17
825 48 29 21 22 16.5 16 18 11 19
30 55 30 25 23 20 20 20.5 13.5 22
Part NumberLever ColorSelectable
€ Unit Price
LeverD Cut Compact Side Mount Hole
Type DSCDKJLSCDKJM
PSCDKJLPSCDKJM
SSCDKJLSSCDKJM
SCJKJLSCJKJM
PSCJKJLPSCJKJM
SSCJKJLSSCJKJM
Standard Lever
(D Cut)SCDKJL
PSCDKJL
SSCDKJL
(Side Mount)SCJKJL
PSCJKJL
SSCJKJL
8
M(Orange)
B(Black)
S(Silver Gray)
CLDM_ (CLMS_) 5-20-M/B/S10
12
15
CLDM_ (CLMS_) 5-25-M/B/S
Miniature LeverSCDKJM
PSCDKJM
SSCDKJM
SCJKJM
PSCJKJM
SSCJKJM
16
20
25CLDM_ (CLMS_) 5-32-M/B/S
30
QVolume Discount (ERound down to one Cent.) P.87- SCJKL
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Price
- Others
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
6.325
EClamp Lever Details
WP.Q2 -999 Miniature Clamp Lever Details
WP.Q2 -1001
6.3
6.3
6.3
R
2-C0.5
2-C0.5
dMdM
D1±
0.1
2xR
B±0.1
B/2
306.
5
29Y
W
(Z)
X
456.
5
35Y
W
(Z)
X
+0.0
5+0
.01
D
0.02 A
A
MiniatureStandard
6.3
6.3
6.3 0.02 A
A
2xRB±0.1
B/2
+0.0
5+0
.01
D
2-M1
M(F
)(N)P1
D1±0.130
6.5
W
Y1
2-M1
dM R
2-C0.5
2-C0.5
29
(F)(N)
P1
D1±0.1
456.
5
35Y YW
Y1X
d
X6.325
EClamp Lever Details
WP.Q2 -999 Miniature Clamp Lever Details
WP.Q2 -1001
MiniatureStandard
6.3
6.3
6.3
2-M12-M1
R
dM
Y2(Z)
X
P2P2
Y2
B/2
306.
5
29
(Z)
X
456.
5
35Y
WdM
Y
W 2xR
B±0.1
+0.0
5+0
.01
D
2-C0.5
2-C0.5
D1±
0.1
0.02 A
A
6.325
EClamp Lever Details
WP.Q2 -999 Miniature Clamp Lever Details
WP.Q2 -1001
MiniatureStandard
EClamp Lever Details
WP.Q2 -999
Miniature Clamp Lever Details
WP.Q2 -1001
6.325
6.3
6.3
6.3
D+0
.05
+0.0
1
2–C0.5 B/2
B±0.1
2xR
2–C0.5
0.02 A
A
R
Md
X
WY 35 6.
545
C
2–M1
P1
(N)
(F)
Y 1
D1±0.1
d
X
WY 29 6.
530
C
2–M1
P1
(N)
(F)
Y 1 S
D1±0.1
M
S
EClamp Lever Details
WP.Q2 -999Miniature Clamp Lever Details
WP.Q2 -1001
6.325
6.3
6.3
6.3
D+
0.05
+0.
01
2–C0.5 B/2
B±0.1
2xR
2–C0.5
0.02 A
A
R
Md
X
WY 35 6.
545
C
2–M1P2
(Z)
D1±0.1
dWY 29 6.
530
CD1±0.1
M
Y2
X
2–M1P2
(Z)
Y 2
6
Part Number Lever
Color
Selectable
Standard Clamp Lever Type € Unit Price Miniature Clamp Lever Type € Unit Price
Type DSlit D Cut Side Mount Hole Slit D Cut Side Mount Hole
SCKL PSCKL SSCKL SCDKL PSCDKL SSCDKL SCJKL PSCJKL SSCJKL SCKM PSCKM SSCKM SCDKM PSCDKM SSCDKM SCJKM PSCJKM SSCJKM
Standard Lever
Miniature Lever
(Clamp)SCKL
PSCKL
SSCKL
SCKM
PSCKM
SSCKM
(D Cut)SCDKL
PSCDKL
SSCDKL
SCDKM
PSCDKM
SSCDKM
(Side Mount)SCJKL
PSCJKL
SSCJKL
SCJKM
PSCJKM
SSCJKM
6
M
(Orange)
B
(Black)
S
(Silver Gray)
8
10
12
15
16
20
25
30
E Do not tighten the lever without inserting the shaft. The shaft collar may be deformed and become unusable.E Levers in ( ) are applicable to SSCK_, SSCDK_ and SSCJK_ (stainless steel products).E D1 Tolerance for D25 and 30 is ±0.3.E C (O.D./I.D. chamfers) will be 1.0 for D30.
D B D1M
(Coarse Thread) M1 d P1 P2 (F) (N) Y1 Y2 R W X Y (Z) Lever
6
18
35
M6
M3
6.6
158
1.5
107 8
7.5 1.5
10 713~15
CLDM_ 6-16-M/B/S (CLMS_6-16-M/B/S)8
108
10CLDM_ 6-16-M/B/S (CLMS_6-16-M/B/S)
10M4
9 9.5 10~13 CLDM_ 6-16-M/B/S (CLMS_6-16-M/B/S)12 40 20 14 11 11 8 13~15 CLDM_ 6-16-M/B/S (CLMS_6-16-M/B/S)15
44M5
23 12 1513
12 13 1016~17 CLDM_6-20-M/B/S (CLMS_6-20-M/B/S)
16 14 15~16 CLDM_6-20-M/B/S (CLMS_6-20-M/B/S)20 48 26 14 18 16 14 15 12 17~18 CLDM_6-25-M/B/S (CLMS_6-25-M/B/S)25 60 30 16 22 19.5 21 18 18 22~24 CLDM_6-32-M/B/S (CLMS_6-32-M/B/S)30 70 M6 35 20 25 23 25 21 23 26~28 CLDM_6-32-M/B/S (CLMS_6-32-M/B/S)
Type Shaft Collar Clamp Lever Lever Thread
Standard MiniatureM
MaterialSSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
SCDKL SCDKM 1.1191/C45E Black Oxide Coating
Zinc Diecast Baked Coating1.0718/9SMnPb28 Black Chromate
PSCDKLPSCDKM 1.1191/C45E Electroless Nickel Plating
SSCDKLSSCDKM 1.4301/X5CrNi18-10 - 1.4305/X10CrNiS18-9 -
Type Shaft Collar Clamp Lever Lever Thread
Standard MiniatureM
MaterialSSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
SCJKL SCJKM 1.1191/C45E Black Oxide Coating
Zinc Diecast Baked Coating1.0718/9SMnPb28 Black Chromate
PSCJKLPSCJKM 1.1191/C45E Electroless Nickel Plating
SSCJKLSSCJKM 1.4301/X5CrNi18-10 - 1.4305/X10CrNiS18-9 -
Type Shaft Collar Clamp Lever Lever Thread
Standard MiniatureM
MaterialSSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
SCKL SCKM 1.1191/C45E Black Oxide Coating
Zinc Diecast Baked Coating1.0718/9SMnPb28 Black Chromate
PSCKL PSCKM 1.1191/C45E Electroless Nickel Plating
SSCKL SSCKM 1.4301 - 1.4305 -
Type Shaft Collar Clamp Lever Lever Thread
Standard MiniatureM
MaterialSSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
SCJKJL SCJKJM 1.1191/C45E Black oxide coatingZinc
DiecastBaked
Coating
1.0718/9SMnPb28
Black ChromatePSCJKJL PSCJKJM 1.1191/C45E Electroless Nickel Plating
SSCJKJL SSCJKJM 1.4301 - 1.4305 -
Type Shaft Collar Clamp Lever Lever Thread
Standard MiniatureM
MaterialSSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
SCDKJL SCDKJM 1.1191/C45E Black Oxide CoatingZinc
DiecastBaked
Coating
1.0718/9SMnPb28
Black ChromatePSCDKJL PSCDKJM 1.1191/C45E Electroless Nickel Plating
SSCDKJL SSCDKJM 1.4301 - 1.4305 -
-2591 -2601
CAD Data
QStandard
Side Mount Hole Type
Shaft Collars -Standard Type with Clamp Lever / Compact Type with Clamp Lever-
-Clamp Type / D Cut Type / Side Mount Hole Type-
QFeature: Easy to change the clamp lever position as this collar does not require any clamping tools. Lever is selectable from Standard or Miniature Type.
QStandard
Clamp Type
QStandard
D Cut Type
QFeature: Smaller by up to 33% in width (B dim.) and 22% in outer diameter (D1 dim.) than the Standard Type with Clamp Lever (P.259).
QCompact
D Cut Type
QCompact
Side Mount Hole Type
Part Number - Lever Color
SCKL12SCDKJM16SCDKM10
---
BMS
Order Example
D P.87DaysDays to Ship
SCKM
SCDKL
Example
E Do not tighten the lever without inserting the shaft. The shaft collar may be deformed and become unusable.E Levers in ( ) are applicable to SSCDKJ_ and SSCJKJ_ (stainless steel products).E D1 Tolerance for D25 and 30 is ±0.3.E C (O.D./I.D. chamfers) will be 1.0 for D30.
D B D1 M M1 d P1 P2 (F) (N) Y1 Y2 R W X Y (Z) C S
8
12
28
5
M4 Depth 6
5.5
1810
0.5
12 710
5.5 1.5
9.5 5.5 11.5
5
5
10
-
12 3220 14
8.5 10.5 7.5 13
15 3412
10.512
11.5
8.5
13.5
16 36 22 16 11 12.5 14.5
20 42
M5 Depth 7.5
25 14 18 14 14 15.5 17
825 48 29 21 22 16.5 16 18 11 19
30 55 30 25 23 20 20 20.5 13.5 22
Part NumberLever ColorSelectable
€ Unit Price
LeverD Cut Compact Side Mount Hole
Type DSCDKJLSCDKJM
PSCDKJLPSCDKJM
SSCDKJLSSCDKJM
SCJKJLSCJKJM
PSCJKJLPSCJKJM
SSCJKJLSSCJKJM
Standard Lever
(D Cut)SCDKJL
PSCDKJL
SSCDKJL
(Side Mount)SCJKJL
PSCJKJL
SSCJKJL
8
M(Orange)
B(Black)
S(Silver Gray)
CLDM_ (CLMS_) 5-20-M/B/S10
12
15
CLDM_ (CLMS_) 5-25-M/B/S
Miniature LeverSCDKJM
PSCDKJM
SSCDKJM
SCJKJM
PSCJKJM
SSCJKJM
16
20
25CLDM_ (CLMS_) 5-32-M/B/S
30
QVolume Discount (ERound down to one Cent.) P.87- SCJKL
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Price
- Others
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
6.325
EClamp Lever Details
WP.Q2 -999 Miniature Clamp Lever Details
WP.Q2 -1001
6.3
6.3
6.3
R
2-C0.5
2-C0.5
dMdM
D1±
0.1
2xR
B±0.1
B/2
306.
5
29Y
W
(Z)
X
456.
5
35Y
W
(Z)
X
+0.0
5+0
.01
D
0.02 A
A
MiniatureStandard
6.3
6.3
6.3 0.02 A
A
2xRB±0.1
B/2
+0.0
5+0
.01
D
2-M1
M
(F)(N)
P1
D1±0.1
306.
5
W
Y1
2-M1
dM R
2-C0.5
2-C0.5
29
(F)(N)
P1
D1±0.1
456.
5
35Y YW
Y1X
d
X
6.325
EClamp Lever Details
WP.Q2 -999 Miniature Clamp Lever Details
WP.Q2 -1001
MiniatureStandard
6.3
6.3
6.3
2-M12-M1
R
dM
Y2(Z)
X
P2P2
Y2
B/2
306.
5
29
(Z)
X
456.
5
35Y
WdM
Y
W 2xR
B±0.1
+0.0
5+0
.01
D
2-C0.5
2-C0.5
D1±
0.1
0.02 A
A
6.325
EClamp Lever Details
WP.Q2 -999 Miniature Clamp Lever Details
WP.Q2 -1001
MiniatureStandard
EClamp Lever Details
WP.Q2 -999
Miniature Clamp Lever Details
WP.Q2 -1001
6.325
6.3
6.3
6.3
D+0
.05
+0.0
1
2–C0.5 B/2
B±0.1
2xR
2–C0.5
0.02 A
A
R
Md
X
WY 35 6.
545
C
2–M1
P1
(N)
(F)
Y 1
D1±0.1
d
X
WY 29 6.
530
C
2–M1
P1
(N)
(F)
Y 1 S
D1±0.1
M
S
EClamp Lever Details
WP.Q2 -999Miniature Clamp Lever Details
WP.Q2 -1001
6.325
6.3
6.3
6.3
D+
0.05
+0.
01
2–C0.5 B/2
B±0.1
2xR
2–C0.5
0.02 A
A
R
Md
X
WY 35 6.
545
C
2–M1P2
(Z)
D1±0.1
dWY 29 6.
530
CD1±0.1
M
Y2
X
2–M1P2
(Z)
Y 2
6
Part Number Lever
Color
Selectable
Standard Clamp Lever Type € Unit Price Miniature Clamp Lever Type € Unit Price
Type DSlit D Cut Side Mount Hole Slit D Cut Side Mount Hole
SCKL PSCKL SSCKL SCDKL PSCDKL SSCDKL SCJKL PSCJKL SSCJKL SCKM PSCKM SSCKM SCDKM PSCDKM SSCDKM SCJKM PSCJKM SSCJKM
Standard Lever
Miniature Lever
(Clamp)SCKL
PSCKL
SSCKL
SCKM
PSCKM
SSCKM
(D Cut)SCDKL
PSCDKL
SSCDKL
SCDKM
PSCDKM
SSCDKM
(Side Mount)SCJKL
PSCJKL
SSCJKL
SCJKM
PSCJKM
SSCJKM
6
M
(Orange)
B
(Black)
S
(Silver Gray)
8
10
12
15
16
20
25
30
E Do not tighten the lever without inserting the shaft. The shaft collar may be deformed and become unusable.E Levers in ( ) are applicable to SSCK_, SSCDK_ and SSCJK_ (stainless steel products).E D1 Tolerance for D25 and 30 is ±0.3.E C (O.D./I.D. chamfers) will be 1.0 for D30.
D B D1M
(Coarse Thread) M1 d P1 P2 (F) (N) Y1 Y2 R W X Y (Z) Lever
6
18
35
M6
M3
6.6
158
1.5
107 8
7.5 1.5
10 713~15
CLDM_ 6-16-M/B/S (CLMS_6-16-M/B/S)8
108
10CLDM_ 6-16-M/B/S (CLMS_6-16-M/B/S)
10M4
9 9.5 10~13 CLDM_ 6-16-M/B/S (CLMS_6-16-M/B/S)12 40 20 14 11 11 8 13~15 CLDM_ 6-16-M/B/S (CLMS_6-16-M/B/S)15
44M5
23 12 1513
12 13 1016~17 CLDM_6-20-M/B/S (CLMS_6-20-M/B/S)
16 14 15~16 CLDM_6-20-M/B/S (CLMS_6-20-M/B/S)20 48 26 14 18 16 14 15 12 17~18 CLDM_6-25-M/B/S (CLMS_6-25-M/B/S)25 60 30 16 22 19.5 21 18 18 22~24 CLDM_6-32-M/B/S (CLMS_6-32-M/B/S)30 70 M6 35 20 25 23 25 21 23 26~28 CLDM_6-32-M/B/S (CLMS_6-32-M/B/S)
Type Shaft Collar Clamp Lever Lever Thread
Standard MiniatureM
MaterialSSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
SCDKL SCDKM 1.1191/C45E Black Oxide Coating
Zinc Diecast Baked Coating1.0718/9SMnPb28 Black Chromate
PSCDKLPSCDKM 1.1191/C45E Electroless Nickel Plating
SSCDKLSSCDKM 1.4301/X5CrNi18-10 - 1.4305/X10CrNiS18-9 -
Type Shaft Collar Clamp Lever Lever Thread
Standard MiniatureM
MaterialSSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
SCJKL SCJKM 1.1191/C45E Black Oxide Coating
Zinc Diecast Baked Coating1.0718/9SMnPb28 Black Chromate
PSCJKLPSCJKM 1.1191/C45E Electroless Nickel Plating
SSCJKLSSCJKM 1.4301/X5CrNi18-10 - 1.4305/X10CrNiS18-9 -
Type Shaft Collar Clamp Lever Lever Thread
Standard MiniatureM
MaterialSSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
SCKL SCKM 1.1191/C45E Black Oxide Coating
Zinc Diecast Baked Coating1.0718/9SMnPb28 Black Chromate
PSCKL PSCKM 1.1191/C45E Electroless Nickel Plating
SSCKL SSCKM 1.4301 - 1.4305 -
Type Shaft Collar Clamp Lever Lever Thread
Standard MiniatureM
MaterialSSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
SCJKJL SCJKJM 1.1191/C45E Black oxide coatingZinc
DiecastBaked
Coating
1.0718/9SMnPb28
Black ChromatePSCJKJL PSCJKJM 1.1191/C45E Electroless Nickel Plating
SSCJKJL SSCJKJM 1.4301 - 1.4305 -
Type Shaft Collar Clamp Lever Lever Thread
Standard MiniatureM
MaterialSSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
SCDKJL SCDKJM 1.1191/C45E Black Oxide CoatingZinc
DiecastBaked
Coating
1.0718/9SMnPb28
Black ChromatePSCDKJL PSCDKJM 1.1191/C45E Electroless Nickel Plating
SSCDKJL SSCDKJM 1.4301 - 1.4305 -
-2611 -2621
CAD Data
Shaft Collars -2-Flats-
-Standard Clamp / Cut Surface Mount Hole Clamp / Clamp with Side Mounting Holes / Cut Surface Mount Hole Split Type-
QD Cut Type
QSide Mount Hole Type
QClamp Type with Mount Holes on Flats
*D10~D25:C0.5 D30:C1
WY
2–C*
Hh
P
XX
2–M
2–M1
2–dB±0.1
2xR
2–R
2–C* B/2
D+
0.05
+0.
01
D 1±
0.1
6.3
6.3
6.3
A
A0.02
6.325TypeM
MaterialSSurface Treatment
AAccessory
SCPKNK1.1191/
C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 2 pcs.
PSCPKNK Electroless Nickel Plating Hexagon Socket Head
Cap Screw 2 pcs.(JIS SUS)SSCPKNK 1.4301 -
Part Number - B
SCKNK15SCPKNK15
--
1010
Order
Example
SCPKNK
Example
QFeatures: 2-Flats helps to save the spaces. Mount Hole Types enable easy installation of sensor brackets.
6.325
H
XZ
Wd
Y
M
hH
XZ
WY
P
M dA
6.3
6.3
6.3
0.02 A
WY
2xRB±0.1
B/2
XZ
PH
Y1
M d
2-C*
2-C*
R
D+
0.05
+0.
01
D1±
0.1
2–M1
2–M1
- Standard Type - Cut Surface Mount Hole Type - Side Mount Hole Type
*D6 ~D25:C0.5D30~D40:C1
QStandard Clamp Type
QCut Surface Mount Hole Clamp Type
QSlit Type with Side Mount Holes
8 Days D P.88EA Express Charge of 5,40 EUR for 3 or more identical pieces.
Express A 2,00 EUR/piece
- SCSNK · SCJNK
D P.87- Others
Days
Days
to Ship
CAD Data
Shaft Collars -Compact Type with Clamp Lever-
Wedge -D Cut Type / Side Mount Hole Type-
Part Number - Lever Color
SCWD12PSCWJ16SSCWDM16
---
BMS
Order Example
D P.87DaysDays to Ship
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49Discount Rate € Unit Price 5% 10%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Price
ECompactness Comparison Table
D
Size Differences Wedge Standard (P.260)
B (Thickness)
D1
(Outer Dia.)B
(Thickness)D1
(Outer Dia.)B
(Thickness)D1
(Outer Dia.)
10 -4 -7 14 28 18 3512 -4 -12 14 28 18 4015 -4 -12 14 32 18 4416 -4 -12 14 34 18 4420 -4 -8 14 40 18 4825 -4 -15 14 45 18 6030 -4 -18 14 52 18 70
QFeatures: Generates more clamping force with less screw tightening torque.Smaller by up to 22% in width (B dim.) and 25% in outer diameter (D1 dim.) than the Standard Type with Clamp Lever (P.259).
QVolume Discount (ERound down to one Cent.) P.87- SCSNK · SCJNKQuantity 1~29 30~39 40~49 50~99
Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard
EFor orders larger than indicated quantity, please request a quotation.
Price
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
- Others
EFor orders larger than indicated quantity, please request a quotation.
6
6
Type Shaft Collar Clamp Lever Lever Thread Wedge
Standard Miniature MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SCWD SCWDM 1.1191/C45E Black Oxide CoatingZinc
DiecastBaked
Coating1.0718/9SMnPb28 Black Chromate CW614N/
CuZn39Pb3PSCWD PSCWDM 1.1191/C45E Electroless Nickel Plating
SSCWD SSCWDM 1.4301 - 1.4305/X10CrNiS18-9 -
Type Shaft Collar Clamp Lever Lever Thread Wedge
Standard Miniature MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SCWJ SCWJM 1.1191/C45E Black Oxide Coating
Zinc Diecast Baked Coating1.0718/9SMnPb28 Black Chromate CW614N/
CuZn39Pb3PSCWJ PSCWJM 1.1191/C45E Electroless Nickel Plating
SSCWJ SSCWJM 1.4301 - 1.4305/X10CrNiS18-9 -
TypeM
MaterialS
Surface TreatmentA
AccessoryStandardCut Surface Mount Hole
Side Mount Hole
SCSNK SCKNK SCJNK1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCSNK PSCKNK PSCJNK Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCSNK SSCKNK SSCJNK 1.4301/X5CrNi18-10 -
E P dimension of Cut Surface Mount Hole Type with D10 is 8.E The halves must remain in the same orientation as shipped when in use.EM1 effective thread depth is 7mm (pilot hole through) for D10-16, 9mm (pilot hole through) for D20 of Cut Surface Mount Hole Type. For others, thread hole is through.
Part Number
BSe
lect
able
D1 HM
(Coarse Thread)
d R W X Y Z hM1
(Coarse Thread)
Y1 P
€ Unit Price
SCSNK PSCSNK SSCSNK SCKNKSCJNK
PSCKNKPSCJNK
SSCKNKSSCJNK SCPKNK PSCPKNK SSCPKNK
Type D
Standard TypeSCSNKPSCSNKSSCSNK(D Dimension 6~40)
Cut Surface Mount Hole Type
SCKNKPSCKNKSSCKNK(D Dimension 10~40)
Side Mount Hole TypeSCJNKPSCJNKSSCJNK(D Dimension 10~40)
Clamp Type with Mount Holes on Flats
SCPKNKPSCPKNKSSCPKNK(D Dimension 10~30)
(Cut Surface Mount Hole Type, Side Mount Hole Type, Split Type with
Mount Holes on Flats are available with *marked B dimension only.)
68
20 17M3 3.4 3
1 6 4 6~6.5
- - - -10 M4 4.5 3.75
88
25 19M3 3.4 3
1.5
8
5
7~910 M4 4.5 3.75
108
30 22
M3 3.4 39 8~10
*10M4 4.5 3.75
6.4M4 10
E10
12*10
10 9~105.8 10
12 M5 5.5 4.5 - - - -
15*10 34
24
M4 4.5 3.75 11.5
6
10~11 5.6 M4 12 1212
35M5 5.5 4.5
1211~13 - - - -
16*10
11~124.8 M5 12 12
12 - - - -
20
*1040
3014 7 13
6 M5 14 1412
- - - -1545
M6 6.6 6 15 8 13~15
2512
36M5 5.5 4.5 17 7 16
*15 50M6 6.6 6
1810
16~18 6.7 M5 16 1630 *15 55 41 20 18~20 7.2 M6 20 2035 15 60 46
223 12 21 - - - -
40 *18 70 53 M8 9 7 26 13 23 9 M8 26 26
D B D1 M M1 P1 P2 Y1 Y2 R X Y C
10
14
284
M4
1810
7 94
8.5 4.5 1112 28 18 8 9.5 9.5 4 1115 32 20
129.5 11 11 5.5 11
16 34
5
22 10 12
4.5
11.5 6 1220 40
M525 14 13 14 13.5 8 12
25 45 29 18 14.5 16.5 16 9 1230 52 30 22 19 19 18.5 11.5 12
ELevers in ( ) are applicable to SSCWD_ and SSCWJ_ (stainless steel products).E C (O.D./I.D. chamfers) will be 1.0 for D30.
Part Number Lever Color
Selectable
€ Unit Price
LeverD Cut Side Mount Hole
Type DSCWDSCWDM
PSCWDPSCWDM
SSCWDSSCWDM
SCWJSCWJM
PSCWJPSCWJM
SSCWJSSCWJM
Standard Lever
(D Cut)SCWDPSCWDSSCWD
SCWDMPSCWDMSSCWDM
(Side Mount)SCWJPSCWJSSCWJ
SCWJMPSCWJMSSCWJM
10
M(Orange)
B(Black)
S(Silver Gray)
CLDF_ (CLFS_) 4-7-M/B/S12
15
Miniature Lever
16
CLDF_ (CLFS_) 5-7-M/B/S20
2530
MiniatureStandard
EClamp Lever Details WP.Q2 -999 Miniature Clamp Lever Details WP.Q2 -1001
A35
6.5
45
CY
P1
D1±0.1
29CY
Y1
6.5
30
X
Y 1X
2-M1
P1
D1±0.12-M1
M M
R
2-C0.5
2-C0.5
B/2
2xR
B±0.10.02 A
6.3 6.3
DH7
6.3
6.325
MiniatureStandard
EClamp Lever Details WP.Q2 -999 Miniature Clamp Lever Details WP.Q2 -10016.325
A
6.545
P2
D1±0.1
P2
6.5
30Y 2X
Y 2X
2-M1 2-M1
M M
2-C0.5
R
2-C0.5
B/2
2xR
B±0.10.02 A
6.3 6.3
DH7
6.3
35CY
D1±0.1
29CY
-2611 -2621
CAD Data
Shaft Collars -2-Flats-
-Standard Clamp / Cut Surface Mount Hole Clamp / Clamp with Side Mounting Holes / Cut Surface Mount Hole Split Type-
QD Cut Type
QSide Mount Hole Type
QClamp Type with Mount Holes on Flats
*D10~D25:C0.5 D30:C1
WY
2–C*
Hh
P
XX
2–M
2–M1
2–dB±0.1
2xR
2–R
2–C* B/2
D+
0.05
+0.
01
D 1±
0.1
6.3
6.3
6.3
A
A0.02
6.325TypeM
MaterialSSurface Treatment
AAccessory
SCPKNK1.1191/
C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 2 pcs.
PSCPKNK Electroless Nickel Plating Hexagon Socket Head
Cap Screw 2 pcs.(JIS SUS)SSCPKNK 1.4301 -
Part Number - B
SCKNK15SCPKNK15
--
1010
Order
Example
SCPKNK
Example
QFeatures: 2-Flats helps to save the spaces. Mount Hole Types enable easy installation of sensor brackets.
6.325
H
XZ
Wd
Y
M
hH
XZ
WY
P
M dA
6.3
6.3
6.3
0.02 A
WY
2xRB±0.1
B/2
XZ
PH
Y1
M d
2-C*
2-C*
R
D+
0.05
+0.
01
D1±
0.1
2–M1
2–M1
- Standard Type - Cut Surface Mount Hole Type - Side Mount Hole Type
*D6 ~D25:C0.5D30~D40:C1
QStandard Clamp Type
QCut Surface Mount Hole Clamp Type
QSlit Type with Side Mount Holes
8 Days D P.88EA Express Charge of 5,40 EUR for 3 or more identical pieces.
Express A 2,00 EUR/piece
- SCSNK · SCJNK
D P.87- Others
Days
Days
to Ship
CAD Data
Shaft Collars -Compact Type with Clamp Lever-
Wedge -D Cut Type / Side Mount Hole Type-
Part Number - Lever Color
SCWD12PSCWJ16SSCWDM16
---
BMS
Order Example
D P.87DaysDays to Ship
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49Discount Rate € Unit Price 5% 10%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Price
ECompactness Comparison Table
D
Size Differences Wedge Standard (P.260)
B (Thickness)
D1
(Outer Dia.)B
(Thickness)D1
(Outer Dia.)B
(Thickness)D1
(Outer Dia.)
10 -4 -7 14 28 18 3512 -4 -12 14 28 18 4015 -4 -12 14 32 18 4416 -4 -12 14 34 18 4420 -4 -8 14 40 18 4825 -4 -15 14 45 18 6030 -4 -18 14 52 18 70
QFeatures: Generates more clamping force with less screw tightening torque.Smaller by up to 22% in width (B dim.) and 25% in outer diameter (D1 dim.) than the Standard Type with Clamp Lever (P.259).
QVolume Discount (ERound down to one Cent.) P.87- SCSNK · SCJNKQuantity 1~29 30~39 40~49 50~99
Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard
EFor orders larger than indicated quantity, please request a quotation.
Price
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
- Others
EFor orders larger than indicated quantity, please request a quotation.
6
6
Type Shaft Collar Clamp Lever Lever Thread Wedge
Standard Miniature MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SCWD SCWDM 1.1191/C45E Black Oxide CoatingZinc
DiecastBaked
Coating1.0718/9SMnPb28 Black Chromate CW614N/
CuZn39Pb3PSCWD PSCWDM 1.1191/C45E Electroless Nickel Plating
SSCWD SSCWDM 1.4301 - 1.4305/X10CrNiS18-9 -
Type Shaft Collar Clamp Lever Lever Thread Wedge
Standard Miniature MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SSurface Treatment
MMaterial
SCWJ SCWJM 1.1191/C45E Black Oxide Coating
Zinc Diecast Baked Coating1.0718/9SMnPb28 Black Chromate CW614N/
CuZn39Pb3PSCWJ PSCWJM 1.1191/C45E Electroless Nickel Plating
SSCWJ SSCWJM 1.4301 - 1.4305/X10CrNiS18-9 -
TypeM
MaterialS
Surface TreatmentA
AccessoryStandardCut Surface Mount Hole
Side Mount Hole
SCSNK SCKNK SCJNK1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCSNK PSCKNK PSCJNK Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCSNK SSCKNK SSCJNK 1.4301/X5CrNi18-10 -
E P dimension of Cut Surface Mount Hole Type with D10 is 8.E The halves must remain in the same orientation as shipped when in use.EM1 effective thread depth is 7mm (pilot hole through) for D10-16, 9mm (pilot hole through) for D20 of Cut Surface Mount Hole Type. For others, thread hole is through.
Part Number
BSe
lect
able
D1 HM
(Coarse Thread)
d R W X Y Z hM1
(Coarse Thread)
Y1 P
€ Unit Price
SCSNK PSCSNK SSCSNK SCKNKSCJNK
PSCKNKPSCJNK
SSCKNKSSCJNK SCPKNK PSCPKNK SSCPKNK
Type D
Standard TypeSCSNKPSCSNKSSCSNK(D Dimension 6~40)
Cut Surface Mount Hole Type
SCKNKPSCKNKSSCKNK(D Dimension 10~40)
Side Mount Hole TypeSCJNKPSCJNKSSCJNK(D Dimension 10~40)
Clamp Type with Mount Holes on Flats
SCPKNKPSCPKNKSSCPKNK(D Dimension 10~30)
(Cut Surface Mount Hole Type, Side Mount Hole Type, Split Type with
Mount Holes on Flats are available with *marked B dimension only.)
68
20 17M3 3.4 3
1 6 4 6~6.5
- - - -10 M4 4.5 3.75
88
25 19M3 3.4 3
1.5
8
5
7~910 M4 4.5 3.75
108
30 22
M3 3.4 39 8~10
*10M4 4.5 3.75
6.4M4 10
E10
12*10
10 9~105.8 10
12 M5 5.5 4.5 - - - -
15*10 34
24
M4 4.5 3.75 11.5
6
10~11 5.6 M4 12 1212
35M5 5.5 4.5
1211~13 - - - -
16*10
11~124.8 M5 12 12
12 - - - -
20
*1040
3014 7 13
6 M5 14 1412
- - - -1545
M6 6.6 6 15 8 13~15
2512
36M5 5.5 4.5 17 7 16
*15 50M6 6.6 6
1810
16~18 6.7 M5 16 1630 *15 55 41 20 18~20 7.2 M6 20 2035 15 60 46
223 12 21 - - - -
40 *18 70 53 M8 9 7 26 13 23 9 M8 26 26
D B D1 M M1 P1 P2 Y1 Y2 R X Y C
10
14
284
M4
1810
7 94
8.5 4.5 1112 28 18 8 9.5 9.5 4 1115 32 20
129.5 11 11 5.5 11
16 34
5
22 10 12
4.5
11.5 6 1220 40
M525 14 13 14 13.5 8 12
25 45 29 18 14.5 16.5 16 9 1230 52 30 22 19 19 18.5 11.5 12
ELevers in ( ) are applicable to SSCWD_ and SSCWJ_ (stainless steel products).E C (O.D./I.D. chamfers) will be 1.0 for D30.
Part Number Lever Color
Selectable
€ Unit Price
LeverD Cut Side Mount Hole
Type DSCWDSCWDM
PSCWDPSCWDM
SSCWDSSCWDM
SCWJSCWJM
PSCWJPSCWJM
SSCWJSSCWJM
Standard Lever
(D Cut)SCWDPSCWDSSCWD
SCWDMPSCWDMSSCWDM
(Side Mount)SCWJPSCWJSSCWJ
SCWJMPSCWJMSSCWJM
10
M(Orange)
B(Black)
S(Silver Gray)
CLDF_ (CLFS_) 4-7-M/B/S12
15
Miniature Lever
16
CLDF_ (CLFS_) 5-7-M/B/S20
2530
MiniatureStandard
EClamp Lever Details WP.Q2 -999 Miniature Clamp Lever Details WP.Q2 -1001
A35
6.5
45
CY
P1
D1±0.1
29CY
Y1
6.5
30
X
Y 1X
2-M1
P1
D1±0.12-M1
M M
R
2-C0.5
2-C0.5
B/2
2xR
B±0.10.02 A
6.3 6.3
DH7
6.3
6.325
MiniatureStandard
EClamp Lever Details WP.Q2 -999 Miniature Clamp Lever Details WP.Q2 -10016.325
A
6.545
P2
D1±0.1
P2
6.5
30Y 2X
Y 2X
2-M1 2-M1
M M
2-C0.5
R
2-C0.5
B/2
2xR
B±0.10.02 A
6.3 6.3
DH7
6.3
35CY
D1±0.1
29CY
-2631 -2641
Shaft Collars -Side Mounting Hole Standard-
-Clamp Type / Split Type-
Shaft Collars -Compact Type with Side Mount Holes- (For Space Saving)
-Clamp Type / Split Type-
QStandardClamp Type
QCompactClamp Type
QStandardSplit Type
QCompactSplit Type
25 6.3
R
M d
X
YW
Z
+0.
01+
0.05
D
2xR±0.1B6.3
6.3
A
6.3
Y1
P
A0.02
1±
0.1
D
2-C*
2-M1
2-C*
B/2
*D8~D25:C0.5D30:C1
25 6.3
D+
0.01
+0.
052-C*
2-C*
B/2
B ±0.1
6.3
2-R
2xR
W
XX
2-d
2-M
2-M1
Y
P
Y1
1D ±0.1
6.36.3
*D8~D25:C0.5D30:C1
Part Number
SCJSJ8SCJPJ15
Order Example
Part Number
SCJS10SCJP12SSCJP25A
Order Example
D P.87DaysDays to Ship
D P.87DaysDays to Ship
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
E For orders larger than indicated quantity, please request a quotation.
Price
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49Discount Rate € Unit Price 5% 10%Days to Ship Standard To be quoted
E For orders larger than indicated quantity, please request a quotation.
PricePlunger Switch
Machined Sheet Metal
P.1781
* Refer to Sheet Metal Products (Plate Type on P.Q2 -1741) (Specific sensor mounting brackets are not available from MISUMI.)
Example
Q Feature: Mounting holes on side enable easy installation of sensor brackets. Q Feature: Smaller by up to 40% in width (B dim.) and 17% in outer diameter (D1 dim.) than the Side Mounting Hole Standard Type (P.263). CAD Data CAD Data
ECompactness Comparison Table
D
Size Differences Compact Standard (P.263)
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
8 -4 -3 6 22 10 2510 -4 -5 6 25 10 3012 -4 -5 6 25 10 3013 -2 -2 8 28 10 3015 -2 -4 8 30 10 3416 -2 -5 8 30 10 3520 -2 -5 8 35 10 4025 -2 -3 10 42 12 4530 -3 -5 12 50 15 55
25 6.3
*D8~D25:C0.5D30:C1
P
Y1 ZX
W
Y
B/2
2xR
B±0.1
M d
R2-C*
2-C*
6.3
D+
0.05
+0.
01
D 1±
0.1
6.3
0.02 A
A
2-M1
25 6.3
*D8~D25:C0.5D30:C1
P B/2
X X
Y1Y
2xR
W
D1±0.1 B±0.1
2-M1
2-M
2-C*
2-R
2-C*
6.3 6.3D
+0.
05+
0.01
6
6
2 Days
Type MMaterial SSurface Treatment AAccessory
SCJS1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCJS Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCJS 1.4301/X5CrNi18-10 -
Type MMaterial SSurface Treatment AAccessory
SCJSJ1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCJSJ Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCJSJ 1.4301/X5CrNi18-10 -
Type MMaterial SSurface Treatment AAccessory
SCJP1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 2 pcs.
PSCJP Electroless Nickel Plating Hexagon Socket Head Cap Screw 2 pcs.(JIS SUS)SSCJP 1.4301/X5CrNi18-10 -
Type MMaterial SSurface Treatment AAccessory
SCJPJ1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 2 pcs.
PSCJPJ Electroless Nickel Plating Hexagon Socket Head Cap Screw 2 pcs.
(JIS SUS)SSCJPJ 1.4301/X5CrNi18-10 -
E The halves must remain in the same orientation as shipped when in use.E ( ) Only for Split Type, P dimension is 14 when D20A is selected.
Part NumberB D1
M(Coarse Thread)
d R W X Y ZM1
(Coarse Thread)
Y1 P
€ Unit Price
Clamp Type Split Type
Type D SCJS PSCJS SSCJS SCJP PSCJP SSCJP
Clamp Type
SCJSPSCJSSSCJS
Split Type
SCJPPSCJPSSCJP
8
10
25
M4 4.5 3.75
1.5
8
5
7~9 M3 8 810
309 8~10
M410 1012
10 9~1013
1534 11.5
610~12
12 12E(14)
15AM5
1635
M5 5.5 4.5
12 11~1216A
M420A
40 147
13 1420
M514
2512 45 17 16~18 17
1625A M4 1230 15 55 M6 6.6 6 20 10 18~20 M6 20 20
E The halves must remain in the same orientation as shipped when in use.
Part NumberB D1
M(Coarse Thread)
d R W X Y ZM1
(Coarse Thread)
Y1 P
€ Unit Price
Clamp Type Split Type
Type D SCJSJ PSCJSJ SSCJSJ SCJPJ PSCJPJ SSCJPJ
Clamp TypeSCJSJPSCJSJSSCJSJ
Split TypeSCJPJPSCJPJSSCJPJ
8
622
M2.6 2.9 2.45
1.5
7
3
9
M3
7
8
10 25 8 812 25 9 913
8
28
M3 3.4 311
1110
15 30 1116 30 11.5 11.520 35 13
513
M413.5 10
25 10 42 M4 4.5 3.75 16.5 16.5 16.5 1230 12 50 M5 5.5 4.5 20 6 20 19 20
-2631 -2641
Shaft Collars -Side Mounting Hole Standard-
-Clamp Type / Split Type-
Shaft Collars -Compact Type with Side Mount Holes- (For Space Saving)
-Clamp Type / Split Type-
QStandardClamp Type
QCompactClamp Type
QStandardSplit Type
QCompactSplit Type
25 6.3
R
M d
X
YW
Z
+0.
01+
0.05
D
2xR±0.1B6.3
6.3
A
6.3
Y1
P
A0.02
1±
0.1
D
2-C*
2-M1
2-C*
B/2
*D8~D25:C0.5D30:C1
25 6.3
D+
0.01
+0.
052-C*
2-C*
B/2
B ±0.1
6.3
2-R
2xR
W
XX
2-d
2-M
2-M1
Y
P
Y1
1D ±0.1
6.36.3
*D8~D25:C0.5D30:C1
Part Number
SCJSJ8SCJPJ15
Order Example
Part Number
SCJS10SCJP12SSCJP25A
Order Example
D P.87DaysDays to Ship
D P.87DaysDays to Ship
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
E For orders larger than indicated quantity, please request a quotation.
Price
QVolume Discount (ERound down to one Cent.) P.87
Quantity 1~29 30~39 40~49Discount Rate € Unit Price 5% 10%Days to Ship Standard To be quoted
E For orders larger than indicated quantity, please request a quotation.
PricePlunger Switch
Machined Sheet Metal
P.1781
* Refer to Sheet Metal Products (Plate Type on P.Q2 -1741) (Specific sensor mounting brackets are not available from MISUMI.)
Example
Q Feature: Mounting holes on side enable easy installation of sensor brackets. Q Feature: Smaller by up to 40% in width (B dim.) and 17% in outer diameter (D1 dim.) than the Side Mounting Hole Standard Type (P.263). CAD Data CAD Data
ECompactness Comparison Table
D
Size Differences Compact Standard (P.263)
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
B (Thickness)
D1 (Outer Dia.)
8 -4 -3 6 22 10 2510 -4 -5 6 25 10 3012 -4 -5 6 25 10 3013 -2 -2 8 28 10 3015 -2 -4 8 30 10 3416 -2 -5 8 30 10 3520 -2 -5 8 35 10 4025 -2 -3 10 42 12 4530 -3 -5 12 50 15 55
25 6.3
*D8~D25:C0.5D30:C1
P
Y1 ZX
W
Y
B/2
2xR
B±0.1
M d
R2-C*
2-C*
6.3
D+
0.05
+0.
01
D 1±
0.1
6.3
0.02 A
A
2-M1
25 6.3
*D8~D25:C0.5D30:C1
P B/2
X X
Y1Y
2xR
W
D1±0.1 B±0.1
2-M1
2-M
2-C*
2-R
2-C*
6.3 6.3D
+0.
05+
0.01
6
6
2 Days
Type MMaterial SSurface Treatment AAccessory
SCJS1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCJS Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCJS 1.4301/X5CrNi18-10 -
Type MMaterial SSurface Treatment AAccessory
SCJSJ1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSCJSJ Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.(JIS SUS)SSCJSJ 1.4301/X5CrNi18-10 -
Type MMaterial SSurface Treatment AAccessory
SCJP1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 2 pcs.
PSCJP Electroless Nickel Plating Hexagon Socket Head Cap Screw 2 pcs.(JIS SUS)SSCJP 1.4301/X5CrNi18-10 -
Type MMaterial SSurface Treatment AAccessory
SCJPJ1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 2 pcs.
PSCJPJ Electroless Nickel Plating Hexagon Socket Head Cap Screw 2 pcs.
(JIS SUS)SSCJPJ 1.4301/X5CrNi18-10 -
E The halves must remain in the same orientation as shipped when in use.E ( ) Only for Split Type, P dimension is 14 when D20A is selected.
Part NumberB D1
M(Coarse Thread)
d R W X Y ZM1
(Coarse Thread)
Y1 P
€ Unit Price
Clamp Type Split Type
Type D SCJS PSCJS SSCJS SCJP PSCJP SSCJP
Clamp Type
SCJSPSCJSSSCJS
Split Type
SCJPPSCJPSSCJP
8
10
25
M4 4.5 3.75
1.5
8
5
7~9 M3 8 810
309 8~10
M410 1012
10 9~1013
1534 11.5
610~12
12 12E(14)
15AM5
1635
M5 5.5 4.5
12 11~1216A
M420A
40 147
13 1420
M514
2512 45 17 16~18 17
1625A M4 1230 15 55 M6 6.6 6 20 10 18~20 M6 20 20
E The halves must remain in the same orientation as shipped when in use.
Part NumberB D1
M(Coarse Thread)
d R W X Y ZM1
(Coarse Thread)
Y1 P
€ Unit Price
Clamp Type Split Type
Type D SCJSJ PSCJSJ SSCJSJ SCJPJ PSCJPJ SSCJPJ
Clamp TypeSCJSJPSCJSJSSCJSJ
Split TypeSCJPJPSCJPJSSCJPJ
8
622
M2.6 2.9 2.45
1.5
7
3
9
M3
7
8
10 25 8 812 25 9 913
8
28
M3 3.4 311
1110
15 30 1116 30 11.5 11.520 35 13
513
M413.5 10
25 10 42 M4 4.5 3.75 16.5 16.5 16.5 1230 12 50 M5 5.5 4.5 20 6 20 19 20
-2651 -2661
Shaft Collars -D Cut Standard / D Cut Compact (For Space Saving)-
-Set Screw Flat Type / Clamp Type / Split Type-
QStandard
Set Screw Flat Type
QStandard
Clamp Type
QStandard
Split Type
QCompact
Clamp Type
QCompact
Split Type
QFeatures: Mounting holes on side enable easy installation of sensor brackets. EN AW-2017 (aluminum) is recommended for weight savings. QFeatures: Smaller by up to 46% in width (B dimension) and 22% in outer diameter (D1 dimension) than D Cut Standard Type (P.265).
D P.87DaysDays to Ship
Part Number - B
SDNJ10SDSJ16SDS10
--
88
Order Example
SCPKNK
Example
H ±0.
2
B±0.1
B/2
WY
D1±0.1
X Z
d
M
P 2–M1
h
2–C*
2–C*
D+
0.05
+0.
01
6.3
6.36.3
R
2xR
6.3
*D10~D25:C0.5D30:C1
6.3 6.3
6.3
6.3
2-C*
2-C*
2-R
2-d
2-M
2-M1
2xR
W
XX
h
B/2
Y
P
+0.05
+0.01
D
H ±0.
2
D1±0.1
B±0.1
*D10~D25:C0.5D30:C1
D
Size Differences Compact Standard (P.265)
B (Thickness)
D1
(Outer Dia.)B
(Thickness)D1
(Outer Dia.)B
(Thickness)D1
(Outer Dia.)
10 -7 -5 8 30 15 35
12 -7 -5 8 30 15 35
15 -7 -10 8 30 15 40
16 -7 -10 8 30 15 40
20 -7 -10 8 35 15 45
25 -5 -8 10 42 15 50
30 -3 -5 12 50 15 55
ECompactness Comparison Table
CAD Data
QVolume Discount (ERound down to one Cent.) P.87- Others
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
- SSDSN · SDNA · SSCDSJ · SSCDNJ
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Price
6
2 Days
EMaterial will be revised to the indicated in ( ) without notice.Type
MMaterial
SSurface Treatment
AAccessory
SDN 1.0038E(1.1191)
Black Oxide Coating Hexagon Socket Head Cap Screw 2 pcs.
PSDN Electroless Nickel Plating Hexagon Socket Head Cap Screw
2 pcs.(JIS SUS)
SSCDN 1.4301 -
SDNA EN AW-2017 -
EMaterial will be revised to the indicated in ( ) without notice.
Type MMaterial SSurface Treatment AAccessory
SDS 1.0038E(1.1191)
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSDS Electroless Nickel Plating Hexagon Socket Head Cap Screw
1 pc.(JIS SUS)
SSCDS 1.4301 -
SDSA EN AW-2017 -
EMaterial will be revised to the indicated in ( ) without notice.Type MMaterial SSurface Treatment AAccessory
SDSN 1.0038E(1.1191)
Black Oxide Coating 2 Set Screws
PSDSN Electroless Nickel Plating 2 Set Screws(JIS SUS)SSDSN 1.4301 -
EM1 effective thread depth is 7mm (pilot hole through) for D6~12.
Part NumberD1 B H M1 P h
Set ScrewM x Length
€ Unit Price
Type D SDSN PSDSN SSDSN
(Set Screw Type)
SDSN
PSDSN
SSDSN
6 208
6.5M3
11
7M4x48 22 7 13
10 25 10 812 28
1011
M4 10 M5x615 30 12.55
20 35 1525 42
1218
M5 126
M6x630 45 20 5
*D8 ~D25:C0.5D30~D50:C1
6.3 6.3
6.3
6.3
2-C*
2-C*
2-R
2-d
2-M
2-M1
2xR
W
XXh
B/2Y
P
+0.05
+0.01
D
H ±0.
2
D1±0.1
B±0.1
2-M
2-M1
2-C*
2-C*
D ±0.11D ±0.11
6.3 6.3
B ±0.1 B ±0.1
H±0.
2h
90°
D+
0.05
+0.
01
P B/2
*C0.5
M
P
H±0.
2
B/2
D+0
.05+0
.012-C*
h
6.3
6.3 6.3
6.3
6.3 6.32-M1
- D=6/8 - D=10/30
*D10~D25:C0.5D30:C1
*D8 ~D25:C0.5D30~D50:C1
EThe Slitting is applicable to D8~13 only.
6.3 6.3
6.3
6.3
+0.05
+0.01
D
2-M1
D
R
2-C*
d 2-C*M
Z
2xR
h
B/2
Y
W
X
P
H±0.
2
B±0.1
D Z
8 810 1012 1015 1216 1220 1325 1630 18
- 1.0038/S235JR / 1.4301/X5CrNi18-10 - EN AW-2017/AlCu4MgSi
D Z
8 810 1012 1013 10
EThe halves must remain in the same orientation as shipped when in use.
Part Number BSelectable
D1
M(Coarse Thread)
d R W X Y Z M1 H h P
€ Unit Price
Clamp Type Split Type
Type D SDSJ PSDSJ SSCDSJ SDNJ PSDNJ SSCDNJ
(Clamp Type)
SDSJPSDSJSSCDSJ
(Split Type)
SDNJPSDNJSSCDNJ
10
830
M3 3.4 3
1.5
95
8~10
M312
58
12 10 9~10
15 113 11
1016 11.5 4.8
20 35 135
13 15 5
25 10 42 M4 4.5 3.75 16.5 16.5M4
18.56 12
30 12 50 M5 5.5 4.5 20 6 20 22
E1.0038/S235JR effective thread depth is 7mm (pilot hole through) for D8~15. For others, holes are complete threads.
EM1 effective thread depth is 7mm (pilot hole through) for 1.4301/X5CrNi18-10~12 and D15~18. For others, holes are complete threads.
EThe halves must remain in the same orientation as shipped when in use.
Part NumberD1 B
M(Coarse Thread)
d R H M1 P h W X Y
€ Unit Price
Clamp Type Split Type
Type D SDS PSDS SSCDS SDSA SDN PSDN SSCDN SDNA
(Clamp Type)
SDSPSDSSSCDSSDSA
(Split Type)
SDNPSDNSSCDNSDNA
(EN AW-2017/AlCu4MgSi is available for * marked
sizes only.)
*8 30
15
M5 5.5 4.5
13 M3 8
7
1.5
10
6*10
35 15 M4 10 11.5*12
13
*1540
M6 7 6
17
M5
12 138
*16
1845 18.5 15 9 15
*20
*25 50 21 2010
1810
*30 55 23.5M6
21 2035 60 26 23
2.023 12
40 70 18 M8 9 7 30 26 12 26 1350 85 22 M10 11 9 37 M8 28 13 3.0 32 16
TypeM
MaterialSSurface Treatment
AAccessory
SDSJ1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSDSJ Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.
(JIS SUS)SSCDSJ 1.4301 -
E Refer to Compactness Comparison Table below.
TypeM
MaterialSSurface Treatment
AAccessory
SDNJ1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 2 pcs.
PSDNJ Electroless Nickel Plating Hexagon Socket Head Cap Screw 2 pcs.
(JIS SUS)SSCDNJ 1.4301 -
E Refer to Compactness Comparison Table below.
-2651 -2661
Shaft Collars -D Cut Standard / D Cut Compact (For Space Saving)-
-Set Screw Flat Type / Clamp Type / Split Type-
QStandard
Set Screw Flat Type
QStandard
Clamp Type
QStandard
Split Type
QCompact
Clamp Type
QCompact
Split Type
QFeatures: Mounting holes on side enable easy installation of sensor brackets. EN AW-2017 (aluminum) is recommended for weight savings. QFeatures: Smaller by up to 46% in width (B dimension) and 22% in outer diameter (D1 dimension) than D Cut Standard Type (P.265).
D P.87DaysDays to Ship
Part Number - B
SDNJ10SDSJ16SDS10
--
88
Order Example
SCPKNK
Example
H ±0.
2
B±0.1
B/2
WY
D1±0.1
X Z
d
M
P 2–M1
h
2–C*
2–C*
D+
0.05
+0.
01
6.3
6.36.3
R
2xR
6.3
*D10~D25:C0.5D30:C1
6.3 6.3
6.3
6.3
2-C*
2-C*
2-R
2-d
2-M
2-M1
2xR
WXX
h
B/2
Y
P
+0.05
+0.01
D
H ±0.
2D1±0.1
B±0.1
*D10~D25:C0.5D30:C1
D
Size Differences Compact Standard (P.265)
B (Thickness)
D1
(Outer Dia.)B
(Thickness)D1
(Outer Dia.)B
(Thickness)D1
(Outer Dia.)
10 -7 -5 8 30 15 35
12 -7 -5 8 30 15 35
15 -7 -10 8 30 15 40
16 -7 -10 8 30 15 40
20 -7 -10 8 35 15 45
25 -5 -8 10 42 15 50
30 -3 -5 12 50 15 55
ECompactness Comparison Table
CAD Data
QVolume Discount (ERound down to one Cent.) P.87- Others
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 18%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
- SSDSN · SDNA · SSCDSJ · SSCDNJ
Quantity 1~29 30~39 40~49 50~99Discount Rate € Unit Price 5% 10% 15%Days to Ship Standard To be quoted
EFor orders larger than indicated quantity, please request a quotation.
Price
6
2 Days
EMaterial will be revised to the indicated in ( ) without notice.Type
MMaterial
SSurface Treatment
AAccessory
SDN 1.0038E(1.1191)
Black Oxide Coating Hexagon Socket Head Cap Screw 2 pcs.
PSDN Electroless Nickel Plating Hexagon Socket Head Cap Screw
2 pcs.(JIS SUS)
SSCDN 1.4301 -
SDNA EN AW-2017 -
EMaterial will be revised to the indicated in ( ) without notice.
Type MMaterial SSurface Treatment AAccessory
SDS 1.0038E(1.1191)
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSDS Electroless Nickel Plating Hexagon Socket Head Cap Screw
1 pc.(JIS SUS)
SSCDS 1.4301 -
SDSA EN AW-2017 -
EMaterial will be revised to the indicated in ( ) without notice.Type MMaterial SSurface Treatment AAccessory
SDSN 1.0038E(1.1191)
Black Oxide Coating 2 Set Screws
PSDSN Electroless Nickel Plating 2 Set Screws(JIS SUS)SSDSN 1.4301 -
EM1 effective thread depth is 7mm (pilot hole through) for D6~12.
Part NumberD1 B H M1 P h
Set ScrewM x Length
€ Unit Price
Type D SDSN PSDSN SSDSN
(Set Screw Type)
SDSN
PSDSN
SSDSN
6 208
6.5M3
11
7M4x48 22 7 13
10 25 10 812 28
1011
M4 10 M5x615 30 12.55
20 35 1525 42
1218
M5 126
M6x630 45 20 5
*D8 ~D25:C0.5D30~D50:C1
6.3 6.3
6.3
6.3
2-C*
2-C*
2-R
2-d
2-M
2-M1
2xR
W
XX
h
B/2
Y
P
+0.05
+0.01
D
H ±0.
2
D1±0.1
B±0.1
2-M
2-M1
2-C*
2-C*
D ±0.11D ±0.11
6.3 6.3
B ±0.1 B ±0.1
H±0.
2h
90°
D+
0.05
+0.
01
P B/2
*C0.5
M
P
H±0.
2
B/2
D+0
.05+0
.012-C*
h
6.3
6.3 6.3
6.3
6.3 6.32-M1
- D=6/8 - D=10/30
*D10~D25:C0.5D30:C1
*D8 ~D25:C0.5D30~D50:C1
EThe Slitting is applicable to D8~13 only.
6.3 6.3
6.3
6.3
+0.05
+0.01
D
2-M1
D
R
2-C*
d 2-C*M
Z
2xR
h
B/2
Y
W
X
P
H±0.
2
B±0.1
D Z
8 810 1012 1015 1216 1220 1325 1630 18
- 1.0038/S235JR / 1.4301/X5CrNi18-10 - EN AW-2017/AlCu4MgSi
D Z
8 810 1012 1013 10
EThe halves must remain in the same orientation as shipped when in use.
Part Number BSelectable
D1
M(Coarse Thread)
d R W X Y Z M1 H h P
€ Unit Price
Clamp Type Split Type
Type D SDSJ PSDSJ SSCDSJ SDNJ PSDNJ SSCDNJ
(Clamp Type)
SDSJPSDSJSSCDSJ
(Split Type)
SDNJPSDNJSSCDNJ
10
830
M3 3.4 3
1.5
95
8~10
M312
58
12 10 9~10
15 113 11
1016 11.5 4.8
20 35 135
13 15 5
25 10 42 M4 4.5 3.75 16.5 16.5M4
18.56 12
30 12 50 M5 5.5 4.5 20 6 20 22
E1.0038/S235JR effective thread depth is 7mm (pilot hole through) for D8~15. For others, holes are complete threads.
EM1 effective thread depth is 7mm (pilot hole through) for 1.4301/X5CrNi18-10~12 and D15~18. For others, holes are complete threads.
EThe halves must remain in the same orientation as shipped when in use.
Part NumberD1 B
M(Coarse Thread)
d R H M1 P h W X Y
€ Unit Price
Clamp Type Split Type
Type D SDS PSDS SSCDS SDSA SDN PSDN SSCDN SDNA
(Clamp Type)
SDSPSDSSSCDSSDSA
(Split Type)
SDNPSDNSSCDNSDNA
(EN AW-2017/AlCu4MgSi is available for * marked
sizes only.)
*8 30
15
M5 5.5 4.5
13 M3 8
7
1.5
10
6*10
35 15 M4 10 11.5*12
13
*1540
M6 7 6
17
M5
12 138
*16
1845 18.5 15 9 15
*20
*25 50 21 2010
1810
*30 55 23.5M6
21 2035 60 26 23
2.023 12
40 70 18 M8 9 7 30 26 12 26 1350 85 22 M10 11 9 37 M8 28 13 3.0 32 16
TypeM
MaterialSSurface Treatment
AAccessory
SDSJ1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 1 pc.
PSDSJ Electroless Nickel Plating Hexagon Socket Head Cap Screw 1 pc.
(JIS SUS)SSCDSJ 1.4301 -
E Refer to Compactness Comparison Table below.
TypeM
MaterialSSurface Treatment
AAccessory
SDNJ1.1191/C45E
Black Oxide Coating Hexagon Socket Head Cap Screw 2 pcs.
PSDNJ Electroless Nickel Plating Hexagon Socket Head Cap Screw 2 pcs.
(JIS SUS)SSCDNJ 1.4301 -
E Refer to Compactness Comparison Table below.