Upload
sudhish-kamal
View
219
Download
0
Embed Size (px)
Citation preview
8/8/2019 05 Nuclear Energy
1/73
Nuclear Energy
8/8/2019 05 Nuclear Energy
2/73
Key Terms
Atoms: Atoms are made of three main parts: protons, neutrons, andelectrons. The protons and neutrons make up the center of the atomwhile the electrons orbit around the center.
Nucleus: The nucleus of an atom consists of protons and neutrons boundby the nuclear force (also known as the residual strong force).
Atomic number: The number of protons in an element that identifies it.
Isotope: If an atom has a different number of neutrons from protons.Isotopes, measured by their total weight called mass number are thesum of neutrons and protons.
Ion: if an atom has a different number of electron from protons.
Radioactive Elements: Some isotopes are unstable and will decay toreach a stable state. These elements are considered radioactive.
8/8/2019 05 Nuclear Energy
3/73
Nuclear Energy
Synonymous with atomic energy
The nucleus of an atom is the source ofnuclear energy.
When the nucleus splits (fission),nuclear energy is released in the formof heat energy and light energy.
Nuclear energy is also released whennuclei collide at high speeds and join(fuse).
8/8/2019 05 Nuclear Energy
4/73
Fission
Fission occurs when an atoms nucleus splits apart toform two or more different atoms.
The most easily fissionable elements are the isotopesof U 235 and Pu 239.
When fissionable elements are flooded with neutrons
causing the elements to split,they form new radioactiveelements and release extra neutrons that create achain reaction if other fissionable material is present.
While Uranium, atomic number 92, is the heaviestnaturally occurring element, many other elements canbe made by adding protons and neutrons with particle
accelerators or nuclear reactors. In general, the fission process uses higher atomic
numbered elements.
8/8/2019 05 Nuclear Energy
5/73
Fusion
Fusion is the combining of one or moreatoms usually isotopes of hydrogen,which are deuterium and tritium.
Atoms naturally repel each other so fusion
is easiest with these lightest atoms. To force the atoms together it takes
extreme pressure and temperature, thiscan be produced by a fission reaction.
The suns energy is produced from anuclear fusion reaction in which hydrogennuclei fuse to form helium nuclei.
8/8/2019 05 Nuclear Energy
6/73
Radiation
Radioactive decayis the process by which an unstableatomic nucleus loses energy by emitting ionizing particles orradiation.
There are currently 37 radioactive elements in the periodictable, 26 of them are manmade and include Plutonium (Pu)
and Americium (Am) (used in household smoke detectors). Half-life is the time taken for a given radioactive substance
to decay to half of its initial mass
Radiation is the release of particles or energy as aresult ofan unstable atom decaying to reach a stable state.
Natural radiation is everywhere, our bodies, rocks, water,sunshine. However, manmade radiation is much stronger.
8/8/2019 05 Nuclear Energy
7/73
Radioactive Decay
8/8/2019 05 Nuclear Energy
8/73
Types of Radiation
1. Alpha ( ) radiation,
2. Beta ( ) radiation
3. Neutron radiation
4. Gamma radiation
5. X-rays
8/8/2019 05 Nuclear Energy
9/73
Alpha Radiation
Alpha radiation is a heavy, very short-range particle andis actually an ejected helium nucleus (4
2He).
Alpha radiation travels only a short distance (a fewinches) in air, but is not an external hazard.
Most alpha radiation is not able to penetrate human skin,clothing.
Alpha-emitting materials can be harmful to humans if thematerials are inhaled, swallowed, or absorbed throughopen wounds.
A variety of instruments has been designed to measurealpha radiation. A thin-window Geiger-Mueller(GM) probecan detect the presence of alpha radiation.
Alpha decay has been observed only in heavier elements(atomic number 52, Tellurium (Te) and greater). Radium,Radon, Uranium, Thorium are alpha emitters.
8/8/2019 05 Nuclear Energy
10/73
Beta Radiation
Beta radiation is a light, short-range particle and is actually anemitted beta particle (an electron, 01 e or a positron orantielectron 01e).
Beta radiation may moderately penetrating and travel severalfeet in air.
Beta radiation can penetrate human skin to the "germinal layer,"where new skin cells are produced. If high levels of beta-emittingcontaminants are allowed to remain on the skin for a prolongedperiod of time, they may cause skin injury. Beta-emittingcontaminants may be harmful if deposited internally.
Most beta emitters can be detected with a survey instrument anda thin-window GM probe (e.g., "pancake" type).
Clothing provides some protection against beta radiation. Beta sources can be used in radiation therapy to kill cancer cells. Some beta emitters are Strontium-90, Carbon-14, Tritium, and
Sulfur-35.
8/8/2019 05 Nuclear Energy
11/73
Neutron Radiation
Neutron radiation is a kind of ionizing radiation whichconsists of free neutrons.
Large neutron sources are rare, and are usually limited tolarge-sized devices like nuclear reactors or particleaccelerators
Uses Neutron radiation is most commonly used for scattering and diffraction
experiments in order to access the properties and the structure ofmaterials in crystallography, physics, biology, chemistry, materialsscience, geology, mineralogy and related sciences
Neutron radiation is also used in select facilities to treat cancerous
tumors due to its highly penetrating and damaging nature to cellularstructure. Neutrons can also be used forimaging of industrial parts termed neutron
radiography when using film, neutron radioscopy when taking a digitalimage, such as through image plates, and neutron tomography for threedimensional images.
8/8/2019 05 Nuclear Energy
12/73
Gamma and X Radiation
Gamma radiation and x rays are electromagnetic radiation likevisible light, radio waves, and ultraviolet light. Theseelectromagnetic radiations differ only in the amount of energythey have. Gamma rays and x rays are the most energetic ofthese.
Gamma radiation or x rays are able to travel several feet in airand many inches in human tissue. They readily penetrate mostmaterials and are sometimes called "penetrating" radiation.
Dense materials are needed for shielding from gammaradiation. Clothing provides little shielding from penetratingradiation.
Gamma radiation is easily detected by survey meters with aSodium Iodide detector probe.
Gamma radiation and/or x rays frequently accompany theemission of alpha and beta radiation during radioactive decay.
Some Gamma emitters are Iodine-131, Cesium-137, Cobalt-
60, Radium-226, and Technetium-99m (metastable).
8/8/2019 05 Nuclear Energy
13/73
Neutrino and Positron
Neutrino It is an elementary particle that usually travels close to the speed
of light, is electrically neutral, and is able to pass throughordinary matter almost undisturbed. This makes neutrinosextremely difficult to detect. Neutrinos have a very small, butnonzero mass. They are denoted by the Greek letter (nu).
Neutrinos are created as a result of certain types of radioactivedecay or nuclear reactions such as those that take place in theSun, in nuclear reactors, or when cosmic rays hit atoms.
Positron Thepositron or antielectron is the antiparticle or the antimatter
counterpart of the electron. The positron has an electric charge
of+1e, and the same mass as an electron. Positrons may be generated by positron emission radioactive
decay (through weak interactions), or by pair production from asufficiently energetic photon.
8/8/2019 05 Nuclear Energy
14/73
Penetration of Radiation
8/8/2019 05 Nuclear Energy
15/73
Doses
The effect of radiation (on a cellular level): changes functionality of thecell (causing cancer or inherited birth defects) or killing.
Radiation doses are measured in rems or sieverts
100 rem = one sievert = one J/kg. An exposure of
100 Sv will cause death within days 10-50 Sv will cause death from gastrointestinal failure in one totwo weeks
3-5 Sv will cause red bone marrow damage half of the time andmay have severe affects consist of burns, vomiting, hemorrhage,blood changes, hair loss, increased susceptibility to infection, and
death. The current recommended occupational dose by the InternationalCommission for Radiological Protection is 50 mSv per year.
The average radiation dose per year fornon-nuclear workers is about1 mSv.
8/8/2019 05 Nuclear Energy
16/73
Energy from Fossil Fuels
Fossil Fuel (Coal) Energy Density: 2.9 x 107 J/kg
Fuel Consumed by 1000-MWe Plant: 7,300,000 kg/day
2007 Global Coal Consumption: 6.1 billion tons
1 eV=1.6 x10-19 J
8/8/2019 05 Nuclear Energy
17/73
Energy from Nuclear Fission
Fission Fuel Energy Density: 8.2 x 10
13
J/kg Fuel Consumed by 1000-MWe Plant: 3.2 kg/day
neutron235
U
FISSION PRODUCT
neutron
neutron
fission
235U,
fission
activation
FISSION PRODUCT
ACTIVATIONPRODUCT
CHAINREACTION
239Pu, etc.
200 MeV
8/8/2019 05 Nuclear Energy
18/73
Energy from Nuclear Fusion
Fusion Fuel Energy Density: 3.4 x 1014 J/kg
Fuel Consumed by 1000-MWe Plant: 0.6 kg/day
Deuterium Tritium
neutron
fusion
activation
HELIUM
ACTIVATIONPRODUCT
17.6 MeV
8/8/2019 05 Nuclear Energy
19/73
8/8/2019 05 Nuclear Energy
20/73
8/8/2019 05 Nuclear Energy
21/73
The furnace in which the
controlled fission of nuclear
fuel take place is called reactor
or atomic reactor.
8/8/2019 05 Nuclear Energy
22/73
Control of Fission
The nuclear fission produces a chain reaction, if such a
reaction occurs at uncontrolled rate it will become adivergent chain reaction resulting into an atomic bomb.
In order to control the chain reaction control rods, are
used, which are made of neutron absorbing material. Themovement of these control rods out of the reactor will
allow the neutron being captured by them (control rods)
to produce fission reaction at a brisk rate, thus,
increasing the power generated.
The absorbing controls (control rods) should have the
following properties:
8/8/2019 05 Nuclear Energy
23/73
Properties of Control Rods
They must have high cross-sectional area for the
absorption. They must be adequately strong.
They must have low mass number in order to allowrapid movement with slight inertia effects.
They must be able to shut down the reactor almost
instantly under all conditions. They must stop any instability of the core power.
They must be able to provide adequate control of powerduring operation.
They must provide good resistance to corrosion.
They must be stable under heat and radiation.
They must have reasonable heat-transfer properties.
They must be economical.
8/8/2019 05 Nuclear Energy
24/73
(Thermopiles)
8/8/2019 05 Nuclear Energy
25/73
REACTOR TYPES
Nuclear Reactors are classified by several methods
Fission reactors can be divided roughly into two classes,depending on the energy of the neutrons that are used to sustain the
fission chain reaction:
1.Thermal reactors use slow or thermal neutrons2.Fast neutron reactors
Classification by moderator material
Graphite moderated reactors Water moderated reactors
1.Heavy water reactors
2.Light water moderated reactors
8/8/2019 05 Nuclear Energy
26/73
Classification by coolant
Water cooled reactor
Pressurized water reactor (PWR)
Boiling water reactor (BWR)
Liquid metal cooled reactor
Sodium-cooled fast reactor
Lead-cooled fast reactor
Gas cooled reactors
Classification by phase of fuel
Solid fueled
Liquid fueled
Gas fueled
REACTOR TYPES contd
8/8/2019 05 Nuclear Energy
27/73
8/8/2019 05 Nuclear Energy
28/73
Pressurized Water Reactor
uss an
8/8/2019 05 Nuclear Energy
29/73
uss an(High Power Channel-type
Reactor)
8/8/2019 05 Nuclear Energy
30/73
Russian RBMK
8/8/2019 05 Nuclear Energy
31/73
urren ower eac or
8/8/2019 05 Nuclear Energy
32/73
urren ower eac orTypes
Reactor Type Moderator Coolant Comments
Gas Cooled Reactor Graphite Light Water CO2 Coolant. Heat Exchangers
(GCR) Primarily Built in UK
Pressurized Water Reactor Light Water Light Water >50% Reactors in 24 Countries
(PWR) Water Pressure = 2000 psi
Boiling Water Reactor Light Water Light Water 2nd most common, >10% of World
(BWR) Water Pressure = 1000 psi
Canadian Deuterium U. Heavy Water Heavy water Uses natural U fuel (
8/8/2019 05 Nuclear Energy
33/73
Characteristics of an Atomic PowerStation
The power is economical only if the output isvery high.
The initial cost of the project is very high (likethat of hydro-electric stations), but the runningcost may be low. However due to several
international sanctions the scenario is different. The power output is controlled by means of heat
removal methods from the nuclear reactor toprevent the overheating of the reactor.
Fuel transportation is less expensive, as the
fuel is used in terms of kg and not in tonne.
8/8/2019 05 Nuclear Energy
34/73
Points to consider whiledeveloping atomic power plants
To make the casing of the thermopile suchas to withstand high temperature, corrosionand intense neutron bombardment.
To devise a fluid to transfer the heat
energy to gas or to feed water. To protect radiation and heat from heattransferring system.
To dispose the radioactive waste of theplants which give out large quantity as gamma
rays etc. at high energy level. To shield the plant from emitting radiations.
8/8/2019 05 Nuclear Energy
35/73
Energy release by Fission
One of the fission products is represented as:
U235
+ n1
U236
La148
+ Br85
+ 3n
i.e., Uranium235 + neutron Uranium236
Uranium236 Lanthanum148 + Bromine85 + 3 free neutrons.
The mass equation for the above reaction is given as:
235.124 + 1.009 147.96 + 84.938 + 3.027
The mass deficiency on the right hand side of above mass equationis 0.208 a.m.u. (atomic mass unit) or 0.3452 x 10 -27 kg.
The energy release can also be represented in electron volts. Theelectron volt is defined as the energy possessed by an electronafter it has fallen through a potential difference of 1 volt.
1 electron volt = 1.6 x 10-19 J
1 a.m.u. = 931 MeV (Million electron volt)
Equivalent energy released
= 0.208 x 931
= 193.65 MeV ~ 200 MeV
1 amu = 1.6597 x 10-27 kg
8/8/2019 05 Nuclear Energy
36/73
Equivalent energy E = mc2
= 0.3452 x 10-27 x 9 x 1016
= 3.1068 x 10-11 Joules/Atom
No. of atoms in 1 kg Uranium
= 26.029 x 1023 (approx.)
Energy released= 3.1068 x 10-11 x 26.029 x 1023
= 80.87 x 1012 J/kg
The above energy released is approx.equivalent to 2.8 million kg of coal with acalorific value of 28.36 x 106 J/kg
8/8/2019 05 Nuclear Energy
37/73
Nuclear Fuel Cycle
8/8/2019 05 Nuclear Energy
38/73
Mining
All of the material is removed in trucksfrom Opencast Mines
8/8/2019 05 Nuclear Energy
39/73
From mine to mill
The mined material is
now transported tomill in Dumpers
8/8/2019 05 Nuclear Energy
40/73
Milling
The mill crushes the rock to powder
The powder is then treated with sulphuric acid to dissolve
the uranium, leaving the rock (depleted ore) behind
Hard rock needs more
8/8/2019 05 Nuclear Energy
41/73
Hard rock needs moreenergy
Hard rock ores areapproximately 3 to 4times more energy-intensive than soft
rock ores to crush.
Neutralisation
8/8/2019 05 Nuclear Energy
42/73
Neutralisation
The depleted ore is
washed andneutralised usinglime
Lime is made by
roasting limestonewith fossil fuels todrive off the CO2
The slurry ispumped to thetailings ponds
8/8/2019 05 Nuclear Energy
43/73
Tailings ponds
Tailings ponds beingcompacted
8/8/2019 05 Nuclear Energy
44/73
Yellow cake
The uranium solution is filtered, and thengoes through a solvent extraction process thatincludes kerosene and ammonia to purify theuranium solution. After purification the
uranium is put into precipitation tanks. Theresult is a product commonly calledyellowcake.
8/8/2019 05 Nuclear Energy
45/73
Calcining
The yellowcake isroasted at 800C inan oil-fired furnacecalled a calciner
The Ammonium di-uranate is convertedto 98% pureUranium oxide
(U3O8)which is a darkgreen powder
8/8/2019 05 Nuclear Energy
46/73
Packing for shipment
The Uranium oxide is packed into drums andtransported to a shipping port
The drums are then shipped, often half wayaround the world
8/8/2019 05 Nuclear Energy
47/73
8/8/2019 05 Nuclear Energy
48/73
UF6 handling
The Uranium hexafluoride gas isthen compressed and transported incylinders to be enriched
8/8/2019 05 Nuclear Energy
49/73
Enrichment
Uranium enrichment increases the amount of U235 in comparisonto U238 . Domestic power plants use a mixture that is 3-5% U235 ,
while highly enriched uranium is generally used for weapons,some research facilities, and naval reactors. Domestic reactorsusually require fuel in the form of uranium dioxide and weaponsuse the enriched mix in the form of a metal. The conversion andenrichment process is very dangerous because not only is theuranium hexafluoride radioactive, it is also chemically toxic. Inaddition, if the uranium hexafluoride comes in contact withmoisture it will release another very toxic chemical calledhydrofluoric acid. There have been numerous accidents during
the conversion and enrichment process. Depleted uranium is thewaste that is generated from the enrichment process.
8/8/2019 05 Nuclear Energy
50/73
Transport
Low-enriched (3.6%) Uranium hexafluoride gasis then transported to the fuel fabrication plant
8/8/2019 05 Nuclear Energy
51/73
Fuel Fabrication
After being enriched, the UF6 is taken to afuel fabrication facility.
The UF6 gas is converted to Uraniumdioxide (UO2) powder and pressed intopellets
They are then baked in an oil-fired furnaceto form a ceramic material.
The pellets are put into long tubes. Thesetubes, made of a zirconium alloy, arecalled fuel rods.
A fuel assembly is a cluster of these sealed
rods. Fuel assemblies go in the core of thenuclear reactor. It takes approximately 25tonnes of fuel to power one 1000 MWereactor per year.
The picture on the right is a fuel assembly.
8/8/2019 05 Nuclear Energy
52/73
8/8/2019 05 Nuclear Energy
53/73
Fuel assemblies
Fresh fuel is only mildly radioactive and canbe handled without shielding.
The fuel assemblies are then transported to
the reactor by truck or train
8/8/2019 05 Nuclear Energy
54/73
Transportation
Radioactive materials are transported fromthe milling location to the conversionlocation, then from the conversion location to theenrichment location, then from the enrichment locationto the to the fuel fabrication facility, and finally to the
power plant. These materials are transported inspecial containers by specialized transport companies.People involved in the transport process are trained torespond to emergencies. In the US, Asia, and WesternEurope transport is mainly by truck, and in Russiamainly by train. Intercontinental transport is usually by
ship, and sometimes by air. Since 1971 there has beenover 20,000 shipments with no incidents and limitedoperator exposure.
8/8/2019 05 Nuclear Energy
55/73
Nuclear Reactors
There are usually several hundred fuelassemblies in a reactor core. There are severaltypes of reactors, but they all use a controlledfission process with a moderator like water
or graphite. During the fission process, plutonium iscreated and half of the plutonium also fissions accountingfor a third of the energy. The fission process makes heatthat is converted to energy.
S t f l
8/8/2019 05 Nuclear Energy
56/73
Spent fuel
Spent fuel rodsnormally spend sixmonths in coolingponds located
within the reactorbuilding, so thatshort-lived radio-activity can decay,
making the materialsafer to handle
W t l t it
8/8/2019 05 Nuclear Energy
57/73
Waste leaves reactor site
Reactor waste is moved by road and rail
It is highly radioactive
There are only a very small number ofreprocessing plants in the world, so thedistances involved are long.
Short term storage
8/8/2019 05 Nuclear Energy
58/73
Short-term storage
This is The Pond at Sellafield in theUK. Spent fuel is kept under water untilit is reprocessed. This keeps it cool and
acts as a radiation shield
8/8/2019 05 Nuclear Energy
59/73
Long-term storage
There are no long-term storage facilitiesoperating anywhere in the world
This is the one military bunker at a Mountain. Thisis what one might look like if one was ever to bebuilt
H d
8/8/2019 05 Nuclear Energy
60/73
Hazard
Degree of retention of radioactive material in the
body. If the material is retained for longer time, itis capable of doing more harm.
The fraction of the radioactive material which ispassed to the critical tissues by the blood stream.
The greater the fraction conveyed, the greater will
be the harm.The radio sensitivity of the tissues involved for
example bone, lymph, glands, ovaries, testes aremore vulnerable to energetic radiation.
Size of organ involved. If the organ is small the
concentration of the radioactive material is highwhich can cause more damage.Essentiality of organ. The most essential organ
damaged by radioactivity can cause early death.Type of radiation.
8/8/2019 05 Nuclear Energy
61/73
8/8/2019 05 Nuclear Energy
62/73
8/8/2019 05 Nuclear Energy
63/73
8/8/2019 05 Nuclear Energy
64/73
8/8/2019 05 Nuclear Energy
65/73
Energy Release by Fusion
Fusion of two heavy hydrogen atoms (1H2) (sometimescalled as Deuterium atoms represented as D) toproduce a helium atom.
1H2 + 1H2 = He3 + n + energy
The mass of heavy hydrogen atom is 2.01473 a.m.u.
mass of helium atom is 3.016997 a.m.u. and the massof free neutron is 1.00898, thus, mass equation is
D+D = He3 + n
2.01473 + 2.01473 = 3.016997 + 1.00898
It will be observed that the sum of mass on the left andright side of above equation are not same. There is amass deficiency on the right hand side equal to0.003483 a.m.u. or equivalent heat energy released is0.003483 x 931 MeV or 3.24 MeV.
8/8/2019 05 Nuclear Energy
66/73
8/8/2019 05 Nuclear Energy
67/73
8/8/2019 05 Nuclear Energy
68/73
8/8/2019 05 Nuclear Energy
69/73
8/8/2019 05 Nuclear Energy
70/73
8/8/2019 05 Nuclear Energy
71/73
8/8/2019 05 Nuclear Energy
72/73
Future Fusion Reactors
1.The fusion technology is still at
infancy
2.Several fusion reactors have been
built, but as of yet, none hasproduced more thermal energy than
electrical energy consumed. Despite
research having started in the 1950s,
no commercial fusion reactor isexpected before 2050.
8/8/2019 05 Nuclear Energy
73/73