Thank you for purchasing a T-Rex Grille. 12/11/08 Fig 2 Step 2 Take the mesh grille and insert it into the opening in the factory grille shell. Push the sides in firmly to seat the mesh grille. (Fig 1) Fig 1 Fig 3 Step 4 From the backside of the grille, install a L bracket on the threaded J hook along with a 6/32 nylon lock nut. The L bracket will latch over the the inner lip of the factory grille shell. (Fig 4) Tighten the 6/32 lock nut with a 8mm socket and ratchet. Repeat this process on all 8 of the threaded J hooks. Installation is now complete. Fig 4 Step 3 Use the threaded J hooks to secure the mesh grille to the factory grille. They will be installed in the outer edge of the mesh grille along the top and bottom edges as indicated in (Fig 2). Take a threaded J hook and insert the threaded end through the mesh with the hook end latched to the mesh grille. (Fig 3) TOOLS REQUIRED: 8mm Socket and Ratchet Flathead Screwdriver 44207 07-09 GMC SIERRA 2500HD/3500 07-09 GMC SIERRA 2500HD/3500 Sport Series Grille 44207 07-09 GMC SIERRA 2500HD/3500 Corona, California www.trexbillet.com PARTS LIST (8) 3” Threaded “J” Hooks (8) 1/2” “L” Brackets (8) 6/32 Nylon Lock Nuts (1) Sport Series Grille Step 1 Remove the radiator top cover. There are several plastic pop clips that you can pry up with a flathead screwdriver. Set the radiator top cover to the side. Remove the factory GMC logo. There are clips on the backside of the logo that hold it onto the factory grille.

07-09 GMC SIERRA 2500HD/3500 - CatalogRack

Download PDF Report

Upload
others
View
5
Download
0

Embed Size (px)

Citation preview

Page 1: 07-09 GMC SIERRA 2500HD/3500 - CatalogRack

Thank you for purchasing a T-Rex Grille. 12/11/08

Fig 2

Step Step 2Take the mesh grille and insert it into the opening in the factory grille shell. Push the sides in firmly to seat the mesh grille. (Fig 1)

Fig 1

Fig 3

Step Step 4From the backside of the grille, install a L bracket on the threaded J hook along with a 6/32 nylon lock nut. The L bracket will latch over the the inner lip of the factory grille shell. (Fig 4) Tighten the 6/32 lock nut with a 8mm socket and ratchet. Repeat this process on all 8 of the threaded J hooks. Installation is now complete.

Fig 4

Step Step 3Use the threaded J hooks to secure the mesh grille to the factory grille. They will be installed in the outer edge of the mesh grille along the top and bottom edges as indicated in (Fig 2). Take a threaded J hook and insert the threaded end through the mesh with the hook end latched to the mesh grille. (Fig 3)

TOOLS REQUIRED:TOOLS REQUIRED:8mm Socket and RatchetFlathead Screwdriver

4420707-09 GMC

SIERRA 2500HD/3500

07-09 GMC SIERRA 2500HD/3500Sport Series Grille

4420707-09 GMC

SIERRA 2500HD/3500Corona, California www.trexbillet.com

PARTS LIST(8) 3” Threaded “J” Hooks(8) 1/2” “L” Brackets(8) 6/32 Nylon Lock Nuts(1) Sport Series Grille

Step Step 1Remove the radiator top cover. There are several plastic pop clips that you can pry up with a flathead screwdriver. Set the radiator top cover to the side. Remove the factory GMC logo. There are clips on the backside of the logo that hold it onto the factory grille.