Upload
isaacaiyac
View
130
Download
6
Embed Size (px)
DESCRIPTION
Doli Printer manuel
Citation preview
DL-0810
Digital minilab
Operation Manual
Contents:
Configuration and technical
specifications
How to turn on and off the machine
Check-up when turn on and off the
machine
Prompts of the machine status
Operation and maintenance of hardware
Operation and maintenance of software
Shanghai Doli Photographic Equipment Co., Ltd
If the pictures and figures are different from the machine, there may have been modifications;
customers should refer to their own machine.
Please check back with our training and service department for the latest information of the
machine, since any modification after the printing will not be reflected in this manual.
Index
Shanghai Doli Photographic Equipment Co., Ltd I
Index
Index ...................................................................................................................................................... I
Overview ................................................................................................................................................. 1
Chapter 1 Work Space Requirement ................................................................................................ 3
1.1 Installation Requirement............................................................................................................................. 3
1.2 Start Machine for the First Time ................................................................................................................. 3
1.3 Shut down machine .................................................................................................................................... 4
Chapter 2 Configuration and Technical Specifications ................................................................. 5
2.1 Appellation of parts .................................................................................................................................... 5
2.2 Outline ........................................................................................................................................................ 7
2.3 Chemical tanks ........................................................................................................................................... 8
2.4 Paper magazine ......................................................................................................................................... 10
2.5 Warning signs ........................................................................................................................................... 12
2.6 Technical specifications ............................................................................................................................ 13
Chapter 3 Turn the System ON and OFF ..................................................................................... 14
Chapter 4 Preliminary Work .......................................................................................................... 16
4.1 Fill in Chemicals ....................................................................................................................................... 16
4.2 Replenishing tanks .................................................................................................................................... 17
4.3 Waste tank operation instruction .............................................................................................................. 17
4.4 Exhaust the air remaining in replenishing pumps ..................................................................................... 18
4.5 Circulation pump check-up ...................................................................................................................... 19
4.6 Check the pump flux ................................................................................................................................ 20
Chapter 5 Prompts of Machine Status .......................................................................................... 23
5.1 Prompts of minilab status ......................................................................................................................... 23
5.2 Main menu of Linux LCD Panel .............................................................................................................. 24
Chapter 6 Installation and Operation of Paper Magazine ........................................................... 25
6.1 Paper loading ............................................................................................................................................ 25
6.2 Loading or unloading paper magazine ..................................................................................................... 28
Chapter 7 Assembly and Disassembly of photo-receiver .............................................................. 31
7.1 Disassembly of photo-receiver ................................................................................................................. 31
DL-0810 Digital Minilab Operation Manual
II Shanghai Doli Photographic Equipment Co., Ltd
7.2 Assembly of photo-receiver ...................................................................................................................... 32
Chapter 8 Daily setup and inspection ........................................................................................... 34
8.1 Daily inspection ........................................................................................................................................ 34
8.2 daily setup ................................................................................................................................................. 39
Chapter 9 Maintenance program ................................................................................................... 46
9.1 Calibration ................................................................................................................................................ 46
9.2 Copy setting .............................................................................................................................................. 48
9.3 Install new paper roll ................................................................................................................................ 49
9.4 Master balance .......................................................................................................................................... 51
9.5 Cassette balance ........................................................................................................................................ 52
9.6 Cassette offset ........................................................................................................................................... 53
9.7 Replenishing pump efficiency .................................................................................................................. 54
9.8 Regeneration doses ................................................................................................................................... 54
9.10 Set temperature for chemical tanks and the dryer ................................................................................... 55
Chapter 10 Qmonitor program ...................................................................................................... 56
10.1 Queue monitor interface ......................................................................................................................... 56
10.2 Change priority of tasks .......................................................................................................................... 57
10.3 Unconditional Print on current cassette .................................................................................................. 58
10.4 Delete or suspend all tasks in queue ....................................................................................................... 59
Chapter 11 Mesg program ............................................................................................................. 60
Chapter 12 Istudio ......................................................................................................................... 62
12.1 Main menu of Istudio ............................................................................................................................. 62
12.2 Program menu ......................................................................................................................................... 65
12.2.1 Main menu ....................................................................................................................................................... 66
12.2.2 Photo submenu ................................................................................................................................................. 71
12.2.3 Paper format menu ........................................................................................................................................... 76
12.3 Load photos into program ....................................................................................................................... 77
12.4 photo browsing ....................................................................................................................................... 78
12.5 Photo projecting ...................................................................................................................................... 80
12.6 Preview window ..................................................................................................................................... 81
12.7 Settings ................................................................................................................................................... 81
12.7.1 Setting description............................................................................................................................................ 82
12.7.2 Colors settings .................................................................................................................................................. 84
Index
Shanghai Doli Photographic Equipment Co., Ltd III
12.7.3 Language settings ............................................................................................................................................ 85
12.7.4 Directory settings ............................................................................................................................................. 86
12.7.5 Logo settings .................................................................................................................................................... 88
12.7.6 Passport photo setting ...................................................................................................................................... 91
12.7.8 Coloring effect setting ..................................................................................................................................... 98
12.7.9 Composite photo settings ................................................................................................................................. 99
12.7.10 Multiphoto settings ...................................................................................................................................... 100
12.7.11 Album settings ............................................................................................................................................. 102
12.7.12 Group photo wizard ..................................................................................................................................... 103
12.7.13 Calendar wizard ........................................................................................................................................... 105
Chapter 13 Waste Chemical Disposal ............................................................................................... 106
Appendix I .......................................................................................................................................... 107
Illustration of Small Keyboard ..................................................................................................................... 107
Appendix II ........................................................................................................................................ 108
Paper Magazine Ex-factory Setting .............................................................................................................. 108
Appendix III ...................................................................................................................................... 109
Computer Virus and Defense ........................................................................................................................ 109
Appendix IV ....................................................................................................................................... 111
Statement ...................................................................................................................................................... 111
DL-0810 Digital Minilab Operation Manual
IV Shanghai Doli Photographic Equipment Co., Ltd
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 1
Overview
Carefully study the manual before operation
1. This machine is specially designed for digital photo printing, no other utilities applicable.
2. Refer to the manual for proper way of operation so as to exert the functions of the machine and
achieve its best performance.
3. Keep this manual in your work area for convenience.
4. Do not install the machine on unleveled ground; a place with high humidity or direct sun light.
5. Do not perform modification or repair which are not permitted in this or the maintenance manual.
Doing so may cause electric shock or fire.
6. Switch off the power supply when performing maintenance as per the manual.
7. The air switch installed on the machine should be called Power Leakage Protector; it protects the
machine when there is creepage, over voltage. It shall not be used to turn on and off the machine;
otherwise it may shorten the creepage’s service lifetime. Switching off the machine should be by
using a breaker.
8. Power Leakage Protector should be tested every six (6) month by pressing the button T (Test) to
check if it functions properly.
9. Do not remove the warning signs from the machine. If the warning signs are damaged, please
replace them.
This machine was inspected in conformity to all safety regulations in the factory. Please pay
attention to the following items when performing maintenance.
1. Do not use of fuses with different specifications.
2. Do not alter any electrical system.
3. Do not use any replacement parts that are not designed for this machine.
4. Make sure mark original positions of all external screws, pedestal, and cables, for the convenience
of maintenance.
5. Note that the wire should not be too tight when connecting to an outlet.
6. Do not install wires in a cluttered space.
7. Clean immediately when chemical is splashed onto the machine.
Cautions:
It is dangerous to perform maintenance on the machine by un-experienced personnel. When
repair is needed, please ask for a Doli authorized technician to do so.
Please take good care of this manual for future use.
DL-0810 Digital Minilab Operation Manual
2 Shanghai Doli Photographic Equipment Co., Ltd
Virus Warning:
It is suggested that the computer of the machine is only used for printing. It should not be used
for internet browsing. Furthermore, anti-virus software must be installed on the computer to
prevent virus infection from CD, flash drive, memory stick, mobile hardware or memory card.
Doli is not responsible for machine damage caused by virus infection of the computer.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 3
Chapter 1 Work Space Requirement
Temperature: Room temperature should be in between 15-30℃.
Humidity: Relative humidity in the work place should be in between 30% to 65%.
Ventilation: Vents should be close to processor to ensure good air circulation. Wind inlet should be
minimum 4.2 CBM per minute, wind outlet should be minimum 4.8 CBM per minute.
Lighting: Maximum 500 LUX.
Reference:Illumination of two 40-watt fluorescent lamps in 1-meter distance is about 500 LUX.
If above requirement cannot be met, it is suggested that air-conditioner, ventilating device and
illuminating device should be installed to ensure proper operation of the machine and a good
working environment for the operator
Safety:Chemical usage instruction from manufacture should be complied strictly. Machine must
be attended while running. Make sure electric cable is in good condition before connecting to
power.
Seat:Operator should have suitable seating. Eyes should line with monitor’s center.
Operator requirement: Basic photographic knowledge, basic Windows operating skill, and
should be trained at Doli.
1.1 Installation Requirement
The machine is a daylight type print processor. The floor should be leveled and solid enough
to ensure the safety of the machine.
There should be dedicated power supply for the machine. Leakage protection switch, breaker,
fuse holder and power socket up to 5KVA should be installed.
Power supply should be 220V-230V, ~50/60Hz, 16A(Other electric voltage for exporting
to different countries shall be made to order). Surge protector should be used. Good ground
connector is a must. Power socket should be near the machine.
Caution!
Power must be cut off when connecting or disconnecting the connectors on PCB.
1.2 Start Machine for the First Time
When the above requirements are met, unpack the machine, install the bottom screws and
washers, and then level the machine on the floor. Remove all anti-shock stuffing, check if machine
is in good condition. Screw each tank’s drainage valve tightly and add water in a sequence of STB3,
STB2, STB1, BF and CD. Check for leakage.
DL-0810 Digital Minilab Operation Manual
4 Shanghai Doli Photographic Equipment Co., Ltd
Place power plug into socket. Close electric box cover. Turn air switch (see picture below) to
ON.
Turn on the computer.
After the computer is started, press Start button to turn on the machine.
1.3 Shut down machine
Turn off operator PC first, switch off the machine.
Turn the air switch to OFF to cut off power supply to the machine. Maintenance can now be
performed on the machine.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 5
Chapter 2 Configuration and Technical Specifications
2.1 Appellation of parts
Keyboard
Paper magazine
Platform
Exposure engine
Monitor
Chemical tanks
Mini-keyboard
Densitometer
Mouse
LCD monitor for host computer
Photo receiver
Client computer switch
Transport rack door
Wiring box cover
DL-0810 Digital Minilab Operation Manual
6 Shanghai Doli Photographic Equipment Co., Ltd
Processor switch (left)
Master computer switch (right)
Air switch
Electrical outlet of monitor
Network cable access
USB socket
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 7
1226 500
12
00
153
2.2 Outline
DL-0810 Digital Minilab Operation Manual
8 Shanghai Doli Photographic Equipment Co., Ltd
2.3 Chemical tanks
Figure 2.3.1
1、CD tank 2、BF tank 3、STB1 tank 4、STB2 tank
5、STB3 tank Note: Each circulation pump is under its tank.
A、Replenishing pumps (CD replenishing pump, BF replenishing pump, STB replenishing pump)
1
2
3
4
5
A
CD, BF waste pumps switch
Circulation pumps
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 9
Figure 2.3.2
Figure 2.3.3
Test strip inlet
Rack cover
DL-0810 Digital Minilab Operation Manual
10 Shanghai Doli Photographic Equipment Co., Ltd
5
4
2.4 Paper magazine
Figure 2.4.1 Appearance of paper magazine
1. Handle 2. Paper outlet guide 3. Paper guide block 4. Paper length indicator
5. Knob 6. Buckle 7. Magnet
Cassette label (defined by user)
2
1
3
6
7
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 11
Figure 2.4.2 Inner configuration of paper magazine
Paper counter
Baffle plate Paper bearing
DL-0810 Digital Minilab Operation Manual
12 Shanghai Doli Photographic Equipment Co., Ltd
2.5 Warning signs
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 13
2.6 Technical specifications
Type Day-light, desk type, digital
Acceptable file
Format
BMP、JPG、TIFF
Paper Width 89mm ~ 152mm (3R~6R)
Paper Load Single cassette, automatic loading and unloading
Print Format 1 inch up to 6”x 8” (152mm×203mm)
Chemistry CD 30S Fast
Paper Advance Staggered Roller Paper Advancing, Cutting prior to printing, vacuum platform to
suctioned paper, single in single out
Processing time 2’ 25”
Light Source LED
Resolution Up to 525dpi
Master system Linux system
Network Local Area Network
Print Passport size, Index, Packaging, etc. 1 ~ 8
Prompts Signals for operation and errors
Color Calibration Professional densitometer
Chemical
replenishing
Automatic replenishing
Tank cubage CD: 7L BF:7L STB1: 4 L STB2:4 L STB3:4 L
Replenishing tank
cubage
CD:10L BF: 10L STB: 10L
Dimensions 1226mm×500mm×1200mm (L×W×H)
Power Supply AC 220V-230V 50/60HZ
Current Max. 16 A
Power Max. 3.5 KVA.
DL-0810 Digital Minilab Operation Manual
14 Shanghai Doli Photographic Equipment Co., Ltd
Chapter 3 Turn the System ON and OFF
First check if all cables are well connected, confirm the terminal air switch is turned on. Switch on the air switch of DL-0810, and then turn on the Linux computer and Windows PC,.
When Linux computer and Windows PC are ready, START UP or READY displayed on LCD
monitor, and then turn on the processor by pressing the “Drive button”. Finally we can start each
application program as follows:
Qmonitor mesg Istudio maintenance
Note: It is unnecessary to run Maintenance program unless you need to do calibration.
When you turn off the machine,use the main menu on the LCD monitor and select turn off.
There are two options: turn off and restart. Press function select key to confirm turn off.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 15
Wait until you see the message on the small yellow LCD screen “It is safe to turn power off”, press
the Linux PC power button to turn it off, and then turn off Windows PC following Windows shutting
down procedure. Finally switch the air switch off.
Warning!!! The above procedure must be strictly followed to avoid abnormality.
Follow the manual strictly. Doli will not be responsible for the data loss or abnormality of the
computers that caused by incorrect shut down.
DL-0810 Digital Minilab Operation Manual
16 Shanghai Doli Photographic Equipment Co., Ltd
Chapter 4 Preliminary Work
4.1 Fill in Chemicals
Prepare the chemical solutions according to manufacture’s specification. Fill the solution to
each tank from stabilizer 3 (STB 3) to developer (CD).
Figure 4.1.1
Warning!!!
Cover CD tank before filling bleacher solution to avoid splashing into developer tank.
Chemical
Hose
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 17
4.2 Replenishing tanks
Open each replenishing tank to fill in appropriate chemicals. Volume of each replenishing tank
is 10L. Make sure there is no bleacher solution splashing into developer tank.
Figure 4.2 Replenishing tanks
4.3 Waste tank operation instruction
There are two waste tanks in the machine: CD waste tank and BF waste tank. There is a switch
that controls the pump to pump out the waste solution when the waste tank is full. Connect the waste
pump to waste tank before running the machine.
CD BF STB
DL-0810 Digital Minilab Operation Manual
18 Shanghai Doli Photographic Equipment Co., Ltd
Empty waste tank: Place the empty barrel next to the waste tank, take out the respective waste
pipe, remove the piston from the pipe, put the pipe mouth into the empty barrel and switch on the
waste pump. Switch off the waste pump after drawing out the air, then plug in the piston and
conserve the waste pipe.
Piston
NOTE: If the pump stops working, remove cover of the waste tank and draw waste solution by
drawing pipe。
4.4 Exhaust the air remaining in replenishing pumps
New pumps may have air remaining inside, which must be exhausted before the pump filled
with chemicals. Observe the following procedure to achieve:
1. Turn on the terminal switch, and then turn on the master computer and user computer.
2. Remove the cover of developer replenishing tank
Waste tank
Waste pipe
Empty tank
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 19
3. Activate the developer pump manually.
Press Function Select key for pumps to enter its sub-menu.
Press Function Select key for regenerations to enter its sub-menu.
Press Function Select key for developer to activate the developer pump.
4. Activate CD pump continuously until no more air bubbles appearing in chemical hose.
5. Pursue the same job for BF pump and STB pump.
4.5 Circulation pump check-up
Open the rack cover first
DL-0810 Digital Minilab Operation Manual
20 Shanghai Doli Photographic Equipment Co., Ltd
Observe the chemical surface
Observe the surface of chemical solution; if there is apparent movement of chemical when the
machine is on, it indicates that the circulation pumps are working properly.
4.6 Check the pump flux
DL—0810 printer is equipped with an automatic system for replenishing. You need to measure
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 21
the efficiency of the replenishing pump to ensure the system is working properly.
1. Open the cover of replenishing pump; place the developer hose into a cylinder (100ml)
2. Press any Function Select key to enter the main menu, and then press Function Select key for
pumps t enter its submenu.
3. Press Function Select key for regenerations to enter its submenu.
Graduated
cylinder
Replenish hose
DL-0810 Digital Minilab Operation Manual
22 Shanghai Doli Photographic Equipment Co., Ltd
4. Press the Function Select key for developer
5. Wait until the replenishing pump stops, read out the volume of chemicals in the cylinder,
which is the flux of CD pump. Repeat three times and get an average value; input the value into
Pump Flux in Maintenance.
6. Repeat the above to measure the flux of BF and STB pumps.
Note: Using software Maintenance, you can transfer the pump flux value into the operating
system of the minilab. Refer to the manual of software Maintenance for details.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 23
Chapter 5 Prompts of Machine Status
5.1 Prompts of minilab status
DL-0810 Digital Minilab Operation Manual
24 Shanghai Doli Photographic Equipment Co., Ltd
5.2 Main menu of Linux LCD Panel
主菜单
(备用)
(备用)
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 25
Chapter 6 Installation and Operation of Paper Magazine
There is one paper magazine on board of this machine.
6.1 Paper loading
Before loading paper, it is necessary to adjust the positions of the two paper guide blocks on
paper outlet of magazine, in accordance with the width of paper to be loaded.
1. Handle 2. Paper guide block 3. Paper outlet
Note: Paper width and format are indicated on outlet of paper magazine. For 6 inches paper
there is no need to use guide block, the paper can be moved out directly.
Local zoom in
1
2
3
DL-0810 Digital Minilab Operation Manual
26 Shanghai Doli Photographic Equipment Co., Ltd
When the position of paper guide block has been adjusted, adjust the position of the two baffle
plates. When you adjust, you should press the moveable clip, as in the picture below:
Paper loading or unloading shall be executed in dark room or dark bag. Move one of the baffles
out of its position and load the paper.
Axis
Baffle plate
Moveable clip
Paper
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 27
Magazine buckle
Load the paper and fix the baffle plate. Then advance the paper into paper-leading rollers.
Rotate the knob which is on the case of cassette, checking if the paper movement is smooth.
Finally close the cassette and fix the two buckles.
Note: When fixing paper on the fixer, the two baffles on both sides must be fixed into slots, to
prevent movement (Paper emulsion side should be upward.)
Paper moving direction
Knob
DL-0810 Digital Minilab Operation Manual
28 Shanghai Doli Photographic Equipment Co., Ltd
Magnet position
Spacer pin
Magazine base
6.2 Loading or unloading paper magazine
Now paper is loaded, the magazine is ready to be installed into the machine. Machine
recognizes the cassette code through the position of magnet. Therefore when loading paper magazine,
the first step is to check the position of magnet on magazine to confirm if the current magazine is the
one you are anticipating.
Refer to section 6.3 for details of cassette code definition
When the cassette code is confirmed, open the magazine compartment door, pull out the
magazine base, place the paper magazine into the base and fix it in the base by the spacer pins.
Check if the movement of the magazine base is smooth, if not, redo the above procedure; if it is,
push the magazine base into the machine and close the magazine compartment door.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 29
When changing paper magazine is needed, open the magazine compartment door; pull out the
magazine base, and take out the magazine by releasing the space pins.
Note:After the magazine is fixed, the corresponding magazine code will be displayed on the
small LCD monitor on the machine console. If “Paper not loaded” is displayed, which means
the paper has not yet been loaded into the machine. Rotate the magazine knob to manually
advance paper into paper inlet, the machine will automatically reel the paper into cutter unit.
When paper is exhausted, “Run out of paper” shall be displayed, reminding you to replace
with a new paper roll. However if there is paper remaining in the magazine and you wish to
change to a different size, then you need to rewind the paper; press Function select key for
“cassette” in the menu of LCD monitor, select “unload” to unload paper , and then the paper
magazine can be removed as described earlier.
DL-0810 Digital Minilab Operation Manual
30 Shanghai Doli Photographic Equipment Co., Ltd
6.3 Magazine code definition
The codes of cassette are in between 1~15
Codes list as follows:“●”with magnet,“○”without magnet.
Magnet1 Magnet2 Magnet3 Magnet4 Cassette code
○ ○ ○ ○ 0
● ○ ○ ○ 1
○ ● ○ ○ 2
● ● ○ ○ 3
○ ○ ● ○ 4
● ○ ● ○ 5
○ ● ● ○ 6
● ● ● ○ 7
○ ○ ○ ● 8
● ○ ○ ● 9
○ ● ○ ● 10
● ● ○ ● 11
○ ○ ● ● 12
● ○ ● ● 13
○ ● ● ● 14
● ● ● ● 15
Sheet 6.4 Magazine code definition
Note: Do not duplicate cassette code. Code 0 is not applicable
⑧ ④ ② ①
Paper outlet guide
Cassette magnet
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 31
Chapter 7 Assembly and Disassembly of photo-receiver
7.1 Disassembly of photo-receiver
Before taking out the photo-receiver, pull out the aero-plug that connects to the photo-receiver.
Move the photo-receiver away from the machine.
Aero plug
DL-0810 Digital Minilab Operation Manual
32 Shanghai Doli Photographic Equipment Co., Ltd
7.2 Assembly of photo-receiver
Before the installation, make sure that the four covered nails on the rack cover are in good
condition.
Then lock the covered nails on the rack cover into the four nail holes on the bottom of the
photo-receiver (as figure 1), to fix the photo-receiver onto the machine. (As figure 2)
Figure 1
Covered nail
Nail cover hole
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 33
Figure 2
Finally insert the aero-plug into the socket besides the dryer cover, turn on the switch of the
machine and make sure the transportation belt works well.
DL-0810 Digital Minilab Operation Manual
34 Shanghai Doli Photographic Equipment Co., Ltd
Chapter 8 Daily setup and inspection
8.1 Daily inspection
Daily maintenance
The daily maintenance for the machine should be performed every day following the steps below:
Maintenance before work
Wash racks with distilled water daily when the processor part is running.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 35
Exam the running status of the circulating pump:
Open the rack cover and observe the surface of working tank. When the printer is started, the
solution should flow obviously, which indicates the circulating pump is working properly.
Check if crossovers are installed properly
1. CD Crossover (blue) 2. BF Crossover (red) 3. STB Crossover (white)
Notice: The crossover should be assembled according to the color code. Do not mix them up.
Do not use them in reverse direction.
1 2 3
Circulation pumps
DL-0810 Digital Minilab Operation Manual
36 Shanghai Doli Photographic Equipment Co., Ltd
Make sure the rack cover is tightly closed to avoid light leakage.
Check if any tank needs to be replenished and if waste tank needs to be emptied.
After this pre-work daily maintenance, you may start to operate the machine.
Warning: Be sure to activate the ventilation system during your operation.
Replenish tank
Waste tank
Rack cover
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 37
Maintenance after work
Remove each crossover and wash them thoroughly.
Wash the outside of the racks with distilled water.
DL-0810 Digital Minilab Operation Manual
38 Shanghai Doli Photographic Equipment Co., Ltd
After inspections and maintenance, place back tank covers and photo-receiver as illustrated
below.
Caution: If there is malfunction in electrical component, please shut down the machine and
restart. If the trouble keeps happening, please ask for help from Doli service
department.
Photo-receiver
Rack cover
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 39
8.2 daily setup
Daily setup
Please refer to the above Maintenance before work section. Once the machine starts running
properly, approach to the next step.
1. Calibration of color level for all paper cassettes.
Run Maintenance software
Choose Calibration and then press Next
DL-0810 Digital Minilab Operation Manual
40 Shanghai Doli Photographic Equipment Co., Ltd
Choose Paper Characteristics, click Next
Run program DS-25 USB.exe. Use densitometer to measure the white dot on the standard tablet.
Check if the readings are the same as that on the tablet. If there is discrepancy, it is necessary to
calibrate the densitometer. Refer to 8.3 for more information.
Click Next
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 41
Select Begin with existing cassette settings option, click Next
Upon the execution of the previous steps, the machine will send a test strip. Use densitometer to
measure the test strip, repeat until the measurement matches the requirement.
DL-0810 Digital Minilab Operation Manual
42 Shanghai Doli Photographic Equipment Co., Ltd
Weekly maintenance:
1. Check the efficiency of replenishing pumps.
2. Wash the racks and crossovers.
Graduated
cylinder
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 43
3. Wash each filter core of the tanks.
Caution:Wash CD filter core separately)
Filter
DL-0810 Digital Minilab Operation Manual
44 Shanghai Doli Photographic Equipment Co., Ltd
Monthly Maintenance:
Check CD tank temperature with a thermometer.
Clean paper magazine by vacuuming.
Thermometer
Vacuum
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 45
1. Replace chemical filters.
2. Empty chemical solution; wash and exam the tanks and racks. Refill the chemicals into the
tanks after cleaning.
3. Remove the cover; clean the fans, and pumps. Clean dust and chemical stain on the parts.
Dryer tank door
4. Clean the dust on PCBs and dust-proofing screen while the power is off.
Warning: The power supply must be shut down during maintenance except checking the
working status and efficiency of the pumps.
Dryer tank cover
Main computer compartment
Left cover
DL-0810 Digital Minilab Operation Manual
46 Shanghai Doli Photographic Equipment Co., Ltd
Select Calibration in the
menu then click on Next
Select Calibration or Paper
characteristics option then click
on Next
Note: Calibration offers quick
calibration, and Paper
characteristics offer the best
calibration result which the
calibration procedure is a little
longer.
Chapter 9 Maintenance program
9.1 Calibration
Paper magazine calibration must be executed daily or at least whenever errors emerging.
Click on the icon on desktop to start Maintenance program.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 47
Select Begin with existing
cassette settings option then
click Next .
The machine will print a test
print.
(If you press Cancel on the
keyboard and then click Next, the
machine will enter this interface
without print a paper.)
Measure the test strip with a densitometer.
If test result matches the requirement, simply click OK to complete the magazine calibration
procedure, computer will send a final confirmation print (press Ctrl key on the keyboard and then
click OK, then computer won’t send the confirmation print). Otherwise click Next to send a new test
print, until test result passed (all green or yellow).
DL-0810 Digital Minilab Operation Manual
48 Shanghai Doli Photographic Equipment Co., Ltd
Select Calibration in the menu of
Maintenance software and click Next.
Select Copy Settings and click Next
Select the source paper magazine
ID and click OK, then computer will
copy the calibration data from the
source paper magazine to current paper
magazine.
Note: ABCD calibration data is not
included in Copy setting.
9.2 Copy setting
In order to save time, you can do copy setting when create a new paper magazine ID,
instead of calibrating paper from scratch.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 49
9.3 Install new paper roll
When you install a new roll of paper, you must tell computer the paper information (On the small
yellow LCD panel you can see the paper information). Follow the below procedure to register new
paper.
Double click on desktop to run Maintenance
Click Next
Select Paper roll installation
and then click Next
Select paper magazine ID with
new paper roll installed.
DL-0810 Digital Minilab Operation Manual
50 Shanghai Doli Photographic Equipment Co., Ltd
If a used paper roll is being
loaded, set the paper type as Paper
roll is partially used. The counter
will be disabled.
Click Next
Define paper type and length.
Click Next
Select default format
(Some calibration will use the
default format without allowing
you to choose format)
Click Ok, now the new magazine is
registered.
Select paper brand in Select
paper.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 51
9.4 Master balance
The correction of Master Balance is for the final control of the difference between the monitor
display and photos, which depends on your personal color evaluation and taste. The Master Balance
will be applied to the paper magazines.
If the color of photo and monitor is different, first check:
1. Paper or chemistry (especially when “white is not white” or “black is not black”).
2. 8 square morning test must be completed.
3. Monitor has been calibrated by Adobe gama or set as sRGB mode.
4. Densitometer self calibration.
Run Maintenance program.
Enter correction value
for example: +0.01 or -0.01
Click OK to save.
Evaluate the result by printing some pictures. If you are not satisfied, repeat the above procedure
to modify the defined correction value.
Select Master balance in the
menu and click Next.
DL-0810 Digital Minilab Operation Manual
52 Shanghai Doli Photographic Equipment Co., Ltd
9.5 Cassette balance
Cassette balance will do the same job as Master balance, but cassette balance only effect the
cassette number you selected.
Double click on the icon on desktop to
run Maintenance program.
Select Cassette balance in the menu
and click Next.
Select the cassette ID and click Next.
Enter the correction value for this cassette,
For example: +0.01 or -0.01.
Click OK to save.
After entering the correction value, print some pictures with this magazine and evaluate. If
not satisfied, try another value until satisfied.
Dryer level is the temperature compensations of this cassette ID.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 53
9.6 Cassette offset
Adjust the horizontal and vertical exposing positions of an image to be in the center of the
paper. Do the offset for each r format and each cassette ID.
Select Cassette offset in the menu and
click Next
Select the print format to be offset and
click Next.
(If you press Ctrl key on the
Keyboard and then click Next,
Computer will not sent test print)
Machine will send a test strip for this
format.
Input the value of the test strip into
the field as demonstrated at right and click
OK to confirm.
DL-0810 Digital Minilab Operation Manual
54 Shanghai Doli Photographic Equipment Co., Ltd
9.7 Replenishing pump efficiency
In order to achieve the proper functions of
chemical replenishing pump, the pump flux has
to be defined.
In menu of Maintenance select
Regeneration Pump efficiency and click
Next.
Measure the pump flux separately for
CD, BF and STB replenishing pumps. Input the
measured values into appropriate fields and
click OK to confirm.
Test three times for each pump and
calculate the average value. Refer to Chapter 4.6
for details.
9.8 Regeneration doses
The replenishment volume for each tank is
defined by chemical manufacturers. Input
these values into Maintenance.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 55
Select Regeneration doses in the
menu and click Next.
Input the dosage recommended by
the chemical manufacture and click OK
to finish the settings.
9.10 Set temperature for chemical tanks and the dryer
Select Temperature in Maintenance
menu and click Next.
Define the temperatures of chemical
tanks and the dryer, then click OK to
confirm.
DL-0810 Digital Minilab Operation Manual
56 Shanghai Doli Photographic Equipment Co., Ltd
Note: The dryer temperature differs for different cassettes.
Chapter 10 Qmonitor program
Queue monitor offers the following functions:
View the pending tasks transferred to processor
Alter priority for any tasks
Cancel a task from a queue
Alter paper magazine with tasks
Delete all tasks in the queue
Suspend tasks transferred to processor.
Double click icon on desktop to run Qmonitor.
10.1 Queue monitor interface
Task identifiers:
Tasks will be processed;
Tasks can not be processed (for example the magazine for the task differs from the current
magazine).
The progress strip is for simulating the progress of paper movement. From left to right: raiser rack,
CD rack, BF rack, STB rack, dryer rack.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 57
10.2 Change priority of tasks
Definitions of the priority of current tasks:
Normal: all tasks will be processed according to the sequence sent
Immediately: process this task ahead all others. After processing this task, other tasks will
resume.
Quick: the task will be processed right after the fulfillment of current task
Idle: the task will be processed only when there is no other task in queue.
Off: the task will be processed only when its priority changed to one of the above.
Two methods can be used to alter the priority of a task in queue:
Method 1:
1. Select one task
2. Select Set Priority option in Task menu
3. Select the desired priority in sub-menu
Method 2:
1. Right click on the task the priority is to be modified.
2. Select Set Priority in the menu.
Delete a task from queue:
Method 1:
DL-0810 Digital Minilab Operation Manual
58 Shanghai Doli Photographic Equipment Co., Ltd
1. Select the task to be deleted. 2. Select Delete in the task menu.
Method 2:
1. Right click on the task to be deleted.
2. Select Delete on popup menu.
10.3 Unconditional Print on current cassette
When an order that request the use of a un-installed or undefined magazine sent by Istudio, this
order will wait in the Queue, until user change to requested cassette. If you want computer to print
this order using current cassette unconditional, operate as follow:
Note: the exposure center of the picture by this print method could be incorrect.
Method 1:
1. Select the task.
2. Select On current cassette option in the task menu
Method 2:
1. Right click on the task correlated with current magazine.
2. Select On current cassette option in the task menu
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 59
10.4 Delete or suspend all tasks in queue
1. Cancel all the tasks in queue
Select Delete all option in task menu if you want to cancel all tasks in queue.
2. Suspend all tasks in queue
Select Puse all in task menu; if you want to suspend all tasks in queue, then all the tasks will be
pending until their priority status are changed.
DL-0810 Digital Minilab Operation Manual
60 Shanghai Doli Photographic Equipment Co., Ltd
Chapter 11 Mesg program
Mesg program is used to synchronously monitor the status of each part of the machine. The
program will pop up when there is any hardware problem emerging, prompt you where the problem
is. When all items show green checks, it means the machine is ready for printing.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 61
As it is demonstrated below, when the temperature of chemical is not reaching the setup value,
there will be a yellow exclamation mark showing, reminding the temperature is incorrect.
The following demonstration shows a red STOP mark, indicating paper magazine is
malfunctioning, and the system can not detect the magazine and execute printing. It is necessary to
check if the magazine is properly installed.
DL-0810 Digital Minilab Operation Manual
62 Shanghai Doli Photographic Equipment Co., Ltd
Chapter 12 Istudio
Istudio (Printing software) is installed in client computer for:
Load pictures from data folders that are compatible with Windows system.
Process (Correction, Framing, and Rotation) pictures which saved as bmp, jpeg, and tiff
format.
Save pictures onto disk in 24 bits bitmap format.
Transfer pictures to master computer for print.
Run Istudio
1. Double click on Istudio icon on desktop
2. Click StartProgram Istudio, the window of Istudio will come up.
12.1 Main menu of Istudio
1. Open safety backup
2. Open pictures in moveable content
3. Open pictures via the path selected recently
4. Open pictures on the hard drive or from other devices
5. Default status
6. Select: Normal, Immediately, Quick, Idle, Off etc.
7. Paper format menu: Select paper format
8. Passport photo frame
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 63
9. Effect frame
10. Open Queue monitor
11. Open Maintenance
1. Scan: automatically scan opened pictures
2. Suspend scanning
3. Ctrl+ to view the previous pictures group
4. Ctrl+ to view the previous picture
5. Ctrl+ to view the next picture
6. Ctrl+ to view the next group of pictures
7. Logo 1
8. Logo 2
9. Logo 3
10. No logo
11. Ctrl+1: Window Index. Browse pictures as index, max. 42 pictures per page, totally 3 pages
12. Ctrl+2 Windows Group. Browse pictures in group, 4 pictures per group
13. Ctrl+3 View pictures, one picture per page
14. Select output modes
15. Send pictures
16. Click the icon to transfer passport photo, right click for passport photo settings
17. Click the icon to transfer index photo, right click for index photo settings.
18. Click the icon to transfer effect photo, right click for effect photo settings
19. Click the icon to transfer composite photo, right click for composite photo settings
20. Click the icon to transfer multiple photos, right click for multiple photo settings
21. Click the icon to transfer album photo, right click for album photo settings
22. Mosaic/Composite function
23. Calendar making
24. Record files on CD
25. Group correction: If you want to modify more then one picture the same way, you can select
DL-0810 Digital Minilab Operation Manual
64 Shanghai Doli Photographic Equipment Co., Ltd
them and do the correction at the same time
26. Reset Key: If you are unsatisfied with the modification, simply select them and restore the
pictures with the Reset Key.
27. Delete Key: Delete the opened pictures.
28. Rotate the picture clockwise 90º.
29. Rotate the picture 180º.
30. Rotate the picture counter clockwise 90º.
1. Density calibration: Move mouse to this area, left click is +, right click is -. Adjustment scope is
-60~+60. You can also work with the numeric keys. For example, for density -15, first key in 15
then right click in this area; similarly for +15, key in 15 then left click the mouse.
2. Yellow calibration: the scope is -60~+60
3. Magenta calibration: the scope is -60~+60
4. Cyan calibration: the scope is -60~+60
5. Contrast calibration: the scope is -9~+9
6. Saturation calibration: the scope is -9~+9
7. Sharpness calibration: the scope is 0~2
8. Picture zoom in and out: move mouse to this area, left click to zoom in and right click to zoom
out.
9. Select cropping or un-cropping mode.
10. There are three color modes to be selected: Color/ Black & White/Sepia.
11. Adjust the rotation angle of picture.
12. Print quantity: 0-99.
13. Color level adjustment
14. Preview window
15. Delete the task being processed
16. Delete all tasks to be processed
17. Exit
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 65
12.2 Program menu
The following methods can be used to command the
program:
Mouse and button in Tools menu
Mouse and main menu
Computer keyboard and Hot Keys
It is up to you for choosing what kind of method.
This chapter describes all the functions of main menu,
Hot Keys and toolbar. Most of them can be executed
through main menu, therefore they can be described with
actual display. Hot Keys are always noted on the side of menu.
The program adopts two correlated menus:
Main menu: Right click inside the window area, it comes up
the main menu. (As the picture below)
Photo menu: Right click on the opened picture to derive this
menu. (See the picture on the right)
DL-0810 Digital Minilab Operation Manual
66 Shanghai Doli Photographic Equipment Co., Ltd
12.2.1 Main menu
Toolbar, menu and Hot Key functions descriptions:
Ctrl +1 Browse pictures with index mode. 42 pictures per page, 3 pages totally.
Ctrl +2 Browse pictures with group mode, 4 pictures per page.
Ctrl +3 Browse pictures, 1 picture per page.
Alt +O Open pictures, in a window similar to Windows Explorer. Select the picture to be
loaded or displayed.
Scan: Automatically scan the opened pictures.
Click button. Load pictures from pictures opened recently.
Pause scan
Ctrl+ Browse previous page, used only in Index or Group.
Browse the previous picture.
Browse the next picture.
Ctrl+ Browse the next page
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 67
Submenu of file
Ctrl+S Save backup copy
Save backup copy to a default folder Security.
Pictures are to be saved in the folder with the same name. In default, if file comes from
different source than the hard drive, the backup copy will be saved onto the hard drive
automatically. Note: Everyday when switching on program for the first time, the program will remind
you if to delete the backup copy. If Yes is selected, the content in Security will be deleted,
and all files will be lost.
Ctrl+O Open backup Copy: Load pictures saved as backup copy.
Alt+S Save into content of ARCHIVE
Save selected pictures into directory of ARCHIVE. Pictures will be saved as 24 bits
bitmap or JPG format. The file size is in accordance with the format of current picture, which
could not exceed pixel amount 2520 x 1680.
Submenu logo
Select a logo for printing index.
Three logos demonstrated at right.
This could not be clicked right now,
because they have not been set yet.
Move the mouse to the icon in
toolbar used for sending index, and right
click, a menu will come up.
DL-0810 Digital Minilab Operation Manual
68 Shanghai Doli Photographic Equipment Co., Ltd
How to set logos?
Move mouse to the icon in toolbar , then right click mouse there will be a dialogue
box coming up, as follows:
Three logos can be set in this dialogue box.
Note: Program only accepts 24 bits bitmap graphics (BMP format) as the format of logo. As
per settings, the program can insert the entire logo, or fill in the logo frame, of which the size is:
2000 x 150 pixels. This is the recommended size, because which will not cause distortion during
scanning.
How to specify logo for index picture?
Click the button of specified logo, select your favorite graphic which you want to set as
logo (this file must be designed and prepared with Photoshop or the other software)or click to
select a logo used recently from the list.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 69
Film submenu
In submenu Film, the name and color mode of a picture can be amended and the pictures can be
transferred and written to CD.
Record picture files to CD
Rename pictures
Change color mode of pictures
Send selected pictures Print selected pictures in passport format
Print selected pictures in index format
Print selected pictures with special designs.
DL-0810 Digital Minilab Operation Manual
70 Shanghai Doli Photographic Equipment Co., Ltd
Format submenu
Applicable format: Recommended when printing as per current paper format.
Full pictures: No cropping. If selected picture differs from the current paper format in ratio of
length/width; there will be white border on the print.
Passport picture frame: Display the setting window for passport photo format.
Rendering Frame: Add rendering frame to picture
Information: Display information of software version
Toolbar: Display and hide toolbar
Settings: Display window of settings
Move Window: Control the movement of window
Close: Close program
Note: If pictures are being loaded in the area of window or the program is processing pictures,
it will ask you to confirm if you really want to quit the program.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 71
12.2.2 Photo submenu
Right click the displayed picture, the Photo submenu is popped up. Refer to the following
figure: in this menu the picture can be rotated; the color, density, contrast, saturation, sharpness,
photo enlargement or reduction, photo position relocation and others can be modified.
The three items in first block are used to rotate the photo
in different ways, such as clockwise 90º, counter clockwise
90º and 180º. When pictures are browsed in Index or Group,
only 180ºrotation can be selected, the other two rotation
methods are not applicable.
The details of Edit in the second block will be introduced
in the next page.
The 14 items in the 3rd block are used to modify
specifications of a photo. The modification can be done either
in the photo menu or in the status bar under the photo; or with
hot keys which are displayed on the right side of the menu.
The latter two methods are recommended because they are
faster and more intuitionist.
The two functions in the 4th block do not have
corresponding keys in the toolbar. However it is possible to
zoom in and out of a picture using hot keys. If the local area
of a picture is to be enlarged, simply hold on the ALT key
and click, the mouse pointer will become a cross. Hold on the
mouse and draw a frame in the area to be enlarged then release
the mouse, the selected area will be enlarged.
The items in the 5th block are for moving picture. The
position of a picture in the frame can be adjusted. You may
also press the Shift key then move mouse onto the picture,
the pointer will become a moveable icon, with left key
of mouse you can drag discretionarily to modify picture until
satisfied.
DL-0810 Digital Minilab Operation Manual
72 Shanghai Doli Photographic Equipment Co., Ltd
The 6th block consists of cropping function. Fill Format is for cropping a picture as per the
print size. Whole Picture is to print a complete picture on paper without cropping. If the photo
format differs from the paper format in use, there will be white border on the printed photo. It is
recommended use Fill Format to print photo. Meanwhile User Defined item can also be used to
modify picture.
There are three color modes in the 7th block for selection of printing color picture, black and
white or sepia. Sepia can be defined in settings of main menus. Please refer to Settings section for
details.
The two items in the 8th block can be used to rotate picture clockwise or counter clockwise, for
example if a photo is slanted. The latter two selections are used to set the amount of copies to be
printed.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 73
Portion of a photo can be enlarged.
Press Alt key and left click mouse, the pointer will become a cross; hold on the left key of
mouse, draw an area for the selected. Release the mouse, the area selected will be enlarged. The
magnification will be changed automatically.
Rotate picture at discrete angle:
Press Ctrl and Alt keys simultaneously,
mouse pointer will become a mini hand. Hold on
the left key of mouse to rotate photo.
Rotation Magnification Alteration
Draw a frame Auto magnification alteration
DL-0810 Digital Minilab Operation Manual
74 Shanghai Doli Photographic Equipment Co., Ltd
Edit Submenu
Submenu Edit is within Photo menu, which can be used together to modify photo, thus the
specification modification will be much easier.
Undo will cancel the correction value made previously. This procedure can be repeated until
the original status of photo is reached.
Redo will retrieve the status cancelled previously. If Undo is not executed, this function can
not be selected.
Copy is to duplicate the correction value. For instance, when applying the data of one photo to
another, select the modified photo and use Copy command; then select another photo and use Paste
command to apply the duplicated data onto the selected photo. The duplicated data includes
correction value of contrast, saturation, sharpness and Gamma correction (D, Y, M, C,).
Select All will select all the pictures displayed on screen, and all the pictures can be corrected at
the same time.
Invert Selection: For instance there are four pictures on one page but only one of them is
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 75
selected, however you want to adjust the other 3 photos, then you can use “Invert Selection” to
operate. It is unnecessary to work together with Ctrl key to select these 3 pictures.
High Quality Photo is to display an
image in its best quality.
Block changes: The locked photo is
covered by a sheet of net. Any modification
will not work on the picture at the moment.
Apply this function one more time on the photo
will disable the locking function.
Restore will reset a corrected photo to its
original status. Note: Make sure only select the
target photo. Otherwise the program will restore
all the photos on this page.
Remove will delete those photos not to
be printed. It will only delete from the order,
no from the hard drive.
Adjustment Submenu
Adjustment Submenu is for adjusting Gamma, whiteness and blackness.
“Gamma=1.0” is to set Gamma to be 1.0 (Which is the mid-point in between whiteness and
blackness).
DL-0810 Digital Minilab Operation Manual
76 Shanghai Doli Photographic Equipment Co., Ltd
12.2.3 Paper format menu
Left click the Format menu in toolbar; select the paper format to be printed in the pop-up
menu. The paper format menu is displayed with three colors and each color represents the current
status of the paper format, which depends on the type of the format that was defined when
registering magazine and the definition of paper as well.
Green represents this format can be used for the current magazine.
Yellow represents this format can be used to print only after the appropriate magazine is
installed.
Red represents there is no magazine defined with this format. You can not send photos to print.
Photo can only be transferred into a specific folder.
Warning: Before connecting with the registry table, this menu only lists 4 basic formats,
which are all in red color. When a format is specified, magazine menu will be displayed.
Current magazine is in green and the others are yellow.
The selected current format is in bold. If more than one magazine for one format is select,
the default magazine will be displayed in bold in the magazine menu. Left click on specified
format will set it as the current format correlated to the default magazine. If other magazines
other than the default one are selected, click the target magazine in the magazine menu, the
selected format and magazine will be displayed on the left side of status bar.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 77
12.3 Load photos into program
The graphic formats that can be loaded by program include BMP, JPG & TIF
1. Open the dialogue box with loaded photos
There are three ways to open dialogue box: left click in the program window, select Open
Picture in pop-up menu; click enter directly or use hot keys Alt+O to open.
2. Select the files you want to load
The dialogue box is very similar to Windows Explorer. Select the path of target photos, on the
right side of window all the photos included in the current folder that match the requirement will be
displayed (Formats differ from BMP, JPG, TIF will not be displayed). Find your target photos then
double click them; they can be loaded into the program. In case several photos are to be loaded
together, use Ctrl key together with mouse. Hold on Ctrl key then click mouse to select your target
photos. The Shift key can also be used together with mouse to select a group of continuous photos;
Hot keys Ctrl+A are used to select all the photos in the folder.
Click Open after selection, the selected photos will be displayed one after another in the window.
The loading progress is displayed at the right bottom corner of status bar.
When files are from other media than hard drive, program will automatically save a backup copy,
which will be saved under a default folder named Security or a subdirectory named after the photo.
If you want to process a picture saved in Security, click the icon or use hot keys Ctrl+O.
DL-0810 Digital Minilab Operation Manual
78 Shanghai Doli Photographic Equipment Co., Ltd
12.4 photo browsing
There are three modes in the program for selection:
Index mode: It can be used to fast process all photos. The description for each photo will be
displayed in status bar. Multiple photos can be corrected and modified at the same time. Set a master
correction value for all photos and the operation is very easy. However the photos can only be
viewed horizontally, each photo can only be rotated by 180º.
Group mode: It displays a group of photos in one page (default number is 4; the display mode
can be changed in program settings). Each photo has its own status bar and the displayed photos can
be modified in a group or individually. Similar to Index mode, photos can only be viewed
horizontally and each photo can only be rotated by 180º.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 79
Single photo mode: Each page displays one photo, of which the specifications will be displayed
in status bar. The photo can be either viewed horizontally or vertically and can be rotated 90º. This
mode is more suitable for frame processing and photo correcting.
DL-0810 Digital Minilab Operation Manual
80 Shanghai Doli Photographic Equipment Co., Ltd
12.5 Photo projecting
In group or index modes, one, multiple or all photos can be processed. In order to project the
photo to be processed, which must be selected by marking marquee (Around the photo there is a
grey rectangle and its color can be changed in the main menu,. Refer to chapter “Settings” for
details), thus the selected photo is projected.
How to project a photo? You may either left click on the photo or work with the Ctrl key. If the
photo has not been selected previously, it will be projected now; if the photo is already in projection
status, it will be de-projected. When the Ctrl key is held on, multiple photos can be selected
continuously for modification. Double click in a blank area will cancel the selection of all photos.
Drag pointer from left to right, all the photos inside the marquee will be selected. The
previously selected photos will remain in projection status. If pointer is dragged from right to left, all
marked photos inside the marquee will be de-marked and the photos previously without marking will
remain unchanged.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 81
12.6 Preview window
Preview window will open automatically when the program starts, which displays all the photos
being processed or being transferred to the hard drive. Left click to display or close preview window
in the utmost right part of status bar, which is for displaying scan progress.
Left click in the window to hide or display progress strip or toolbars.
12.7 Settings
All specifications can be set in the main menu. After installation, all the settings are set to
default. If any of them needs to be changed, appropriate functions can be selected in the main menu.
Warning: Settings window is password protected, only authorized personnel has access to the
password.
DL-0810 Digital Minilab Operation Manual
82 Shanghai Doli Photographic Equipment Co., Ltd
12.7.1 Setting description
Export settings to file will save the settings into a specified file, including the data of other
page settings.
Import settings from file will import saved setting data into program
Page default settings will restore the default settings of current page.
Default settings will restore default settings for all pages.
Defined width is the thickness of defined frame, ranging 2~10.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 83
The distance between correction bar and image can also be set, ranging from 1 to 10.
Max. Filling Area is the default value of the program, refers to the maximum display area. If the
user wants to customize display area, simply cancel the default value and input the distance in
minimum vertical and horizontal distances, ranging 0~100.
Image vertical location alteration refers when importing picture into program, the photo is
displayed vertically. When browsing picture in index or group modes, image can not be vertically
displayed. You may rotate the picture either 90º clockwise or 90º counter clockwise for display.
Interpolation Arithmetic is an arithmetic method for program to change pixel amount and the
size of a photo. Either neighboring or quadric-cubic value can be selected.
“Neighboring” (with rough edge) is high in speed but low in resolution. This method is
recommended to be used for the demonstration figure having rough edge, in order to save the hard
edge and generate small file. However this method will likely generate rough effect, such effect will
become obvious when zoom in or out of an image or when multiple operation is executed in an area.
“Quadric Cubic” (smooth) is low in speed but high in resolution, which can achieve the most
smooth hue layers.
DL-0810 Digital Minilab Operation Manual
84 Shanghai Doli Photographic Equipment Co., Ltd
12.7.2 Colors settings
This tablet is used to edit the color of displayed
photo. Press Colors, the dialogue box at the right
side will pop up. The user can self-define the color.
Background Color button: To set the
background color of the window. The user can
set as per his own taste.
Mark Frame Color button: To set the color of
frame for selected photos.
Passport Frame First Color and Passport
Frame Second Color buttons: To set the color of
rim of the passport photo. This defines the area
to be printed. It is composed of two colors, this
function can be used for color settings.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 85
12.7.3 Language settings
Use this tablet to select user preferred
language. Open the list and select the
language preferred.
DL-0810 Digital Minilab Operation Manual
86 Shanghai Doli Photographic Equipment Co., Ltd
12.7.4 Directory settings
There are three default directories:
SECURITY for saving backup files
ARCHIVE for saving files in a moveable directory
WORKDIR is in the root directory
It is unnecessary to create your own directory. In some cases, user can define the location for
the path of these directories.
Click button, recently used directories in recent will appear. If there is no target directory,
you can then set a path of directory of your own. When you click button, a Select Directory
dialogue box will come up.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 87
In the dialogue box, select the location for your directory.
SECURITY directory: for saving backup files. When photos are imported from other media
than the hard drive, the program will automatically save the file into SECURITY directory. A
dialogue box will pop up reminding you to assign a name for the file to be saved.
Moveable directory: when user select function, all photos to be processed will
be saved in this directory.
Work directory: all temporary files will be saved in this directory.
Warning: If machine is to be used frequently, a lot of photos in SECURITY directory and
moveable directory will occupy the valuable space of hard drive of work station. Therefore you
must save these directories into a disk with enough space or clear these directories regularly.
Moreover the data in these directories are valuable, which should be backed up from time to
DL-0810 Digital Minilab Operation Manual
88 Shanghai Doli Photographic Equipment Co., Ltd
time.
12.7.5 Logo settings
Logo of graphic files can be selected in Index mode. Three logos can be set at most. Once the
path is defined, logo can be selected in the toolbar.
Warning: Program can only recognize 24 bits bitmap graphics for logos. The best size of
graphic file is 2000*150 pixels, which is recommended. It is also the only default size, because
logo in this format will not have distortion when scanned.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 89
Before select a file for logo, you shall use Photoshop or other software to create a logo of size
2000x150. Click corresponding to a given logo, select the location of logo in dialogue box or
click to select a logo recently used from the pop-up list.
After selecting the logo, in Page default Settings select a display mode for logo: the default is
Default Settings item. If the logo is not created with default format and bigger than the default, that
portion will not be displayed:
If Whole Logo in Frame is selected, the software will automatically adjust the scale of the logo
displayed according to the default format.
Color is the color for defining the background color of index, the default is white.
Date format is the mode for defining display date: “Y/M/D” or “D/M/Y”
DL-0810 Digital Minilab Operation Manual
90 Shanghai Doli Photographic Equipment Co., Ltd
Font is used in index photos printing to define the font, font style, size and color of title and
description. Click button, set in the pop-up dialogue box.
There are Prefix Length and Postfix Length; the former is used for deleting the unnecessary
characters from the beginning of the description and the later is to delete the unnecessary characters
at the end.
For example, the description on the left bottom corner of each photo is 7 bytes. If customer
wants to delete a couple of letters from both ends, it can be set in logo dialogue box, e.g. input “2” in
Prefix Length and input “4” in Postfix Length.
The photo printed out as below. 2 bytes have been removed from prefix and 4 bytes have been
removed from postfix.
Warning: Space and punctuation each occupies 1 byte.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 91
12.7.6 Passport photo setting
Width: Set the width of passport photo (mm)
Height: Set the height of passport photo (mm)
Distance: Set the distance between each passport photo (mm)
Minimum Blankness: Set the min. margin width between passport photo and paper edge (mm)
Color: Set the background color for passport photo
Frame Color: Set the color of frame.
Frame width: Set the width of frame (pixel amount)
Save: Save the data of passport photo as a file for future use.
Delete: Delete a file if no longer to be needed.
DL-0810 Digital Minilab Operation Manual
92 Shanghai Doli Photographic Equipment Co., Ltd
12.7.7 Photo frame effect settings
Width: Set the width of frame, ranging from 0~60 (mm)
Color: Set the color of frame.
File: Select a graphic file as the frame of a photo, which can be rotated and stretched. Its
transparency can also be changed.
Dilution: When dragging the dilution pointer, background picture can dilute.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 93
Frame width before adjustment
Input a value into the field, the thinness around the photo will be change. The unit is in milli
meter. The modified photo is shown below:
Frame width after adjustment
DL-0810 Digital Minilab Operation Manual
94 Shanghai Doli Photographic Equipment Co., Ltd
Before selecting background color
Select Color in background option. Click the color block and select the preferred color for the
frame, the result is shown as follows:
After selecting background color
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 95
Before selecting background file
In order to select background file, check File in background block. Click icon to select a
graphic file to be the background. The outcome is shown below:
After selecting background color
DL-0810 Digital Minilab Operation Manual
96 Shanghai Doli Photographic Equipment Co., Ltd
Before background stretching
Check Strech, the background will be stretched. The outcome is shown below:
After background stretching
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 97
Before background dilution
Drag the pointer in Dilute Option with mouse, the background will be diluted, as follows:
After background dilution
DL-0810 Digital Minilab Operation Manual
98 Shanghai Doli Photographic Equipment Co., Ltd
12.7.8 Coloring effect setting
Coloring settings is to set sepia effect in 3 different ways .It is to create personalized photos
through modifying GAMMA value of each RGB channel.
1). Move the pointer of mouse to the curve of RGB to adjust Gamma value;
2). Left click the mouse to drag and modify one of the curves;
3). You may also input value directly into RGB data field to adjust.
The value used in adjustment can be saved in file format for future use. Click Save, a dialogue box
pops up as follows. Input the file name and click OK.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 99
12.7.9 Composite photo settings
Cols is for dividing the photo horizontal sectors;
Rows is for dividing the photo vertical sectors
Fold is for more precisely composite photos. When composing photos, it is allowed to have laps
among photos. Click OK to print.
DL-0810 Digital Minilab Operation Manual
100 Shanghai Doli Photographic Equipment Co., Ltd
12.7.10 Multiphoto settings
Multiphoto function is used to print one picture in different sizes on one print.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 101
Add photo is to add target photos into template;
Delete photos is for delete template
Surrounding frame is to add frame to template
Frame color is to select the color of a frame
Frame width is to select the size of surrounding frame
Template archives is to save the proper template
Delete is to delete template. Click OK to send.
Define photo size:
Select one photo within the template with pointer; double click, Properties window pops
up. Change the values in the following fields to define photo size.
DL-0810 Digital Minilab Operation Manual
102 Shanghai Doli Photographic Equipment Co., Ltd
12.7.11 Album settings
Margins is to set the border of template.
Space is to set the distance between two templates.
Photos count is for set the number of photos vertically or horizontally.
Page orientation is to set the direction of template to be vertically or horizontally.
Photos orientation is to set the direction of photo to be vertically or horizontally.
Surrounding Frame is the same as that of multiphoto setting.
Background is to select color or profile of background.
Miscellaneous is to select the template alignment effect.
Caption is to display the code of photo alignment.
Template archives is to save the proper templates.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 103
12.7.12 Group photo wizard
Add photo is to select the amount of template.
Delete photos is to delete templates.
Frames is the same as that of multiphoto.
Background is to select color or profile of background.
Font is to set font of the text in display.
Shadow is to add shadow effect on template.
Shape is to select the shape of template.
Archives is to save proper templates.
Send is to print corrected photos.
Save project is to save template and photos that are corrected for color and effects.
Open project is to open the saved template and photo that have been corrected for color and effects.
DL-0810 Digital Minilab Operation Manual
104 Shanghai Doli Photographic Equipment Co., Ltd
After setting the template, press Ctrl + Shift to select and drag pictures in printing interface into
the template in Group Photo Wizard. Select a photo and right click to customize Photo properties.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 105
12.7.13 Calendar wizard
Click to open a file. Select a template, press Ctrl + Shift to drag photo into the template.
Correct color, density, angle on the toolbar at the bottom of the screen and click Send.
(Note: Pure white background is needed for template)
DL-0810 Digital Minilab Operation Manual
106 Shanghai Doli Photographic Equipment Co., Ltd
Chapter 13 Waste Chemical Disposal
Rules of waste disposal, recycling and neutralization:
All chemical waste generated during photo processing is regarded as poisonous waste, such
as chemical solutions from CD and BF. The output of waste must be minimized and disposed in a
way that human beings and natures are protected. The waste should be re-cycled and re-utilized or
neutralized at an off-site location. Below are some of the rules:
Warning signs must be posted in the warehouse and waste must be stored in a visibly seen
place and away from people or animals.
Container must be laid on solid and even ground, to avoid tipping over. No subject can be
placed above it or in front.
Dumping waste into drainage system is strictly prohibited!
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 107
Appendix I
Illustration of Small Keyboard
1. Saturation Adjustment D: Density Adjustment
2. Contrast Adjustment Y: Yellow Adjustment
3. Zoom M: Magenta Adjustment
4. Sharpness Adjustment C: Cyan Adjustment
5. Browse in index mode PREV: back to previous step
6. Browse in single mode NEXT: restore previous step
7. Delete photos loaded ENTER: send photos
8. Rotate photos HQ: sharpen the area zoomed in
9. Gamma auto Adjustment Back: retrieve the operation
10. Blackness of Gamma Adjustment Direction Keys: adjust photo position
11. Gamma Adjustment
12. Whiteness of Gamma Adjustment
13. Restore Gamma
14. Go to next photo
15. Go to previous photo
DL-0810 Digital Minilab Operation Manual
108 Shanghai Doli Photographic Equipment Co., Ltd
Appendix II
Paper Magazine Ex-factory Setting
Cassette # Cassette Code Applicable Paper Format
# 1 02 4”× 5” 4”× 6”
# 2 04 6”× 4” 6”× 8”
Machine is equipped with two magazines when ex-factory. The magazine codes listed above
are the recognition codes displayed in the program. It is unnecessary to reset for ABCD (centering)
when customer starts using the machine. However if the user intends to use a different code, then it
is necessary to recalibrate the center for this said code.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 109
Appendix III
Computer Virus and Defense
Along with the popularization of computers and the rapid development of internet, the
concomitant computer viruses are making headache for their users. In order to help user having
better knowledge about computer virus, we make a detailed introduction about its dangers and the
know-how of computer protection.
Computer virus is a special program edited by human being, which can disorder, alter and
demolish the computer software and duplicate and infect other programs. Computer will execute as
per these error commands and then damage user’s data.
Computer virus is infectious, which is very harmful, usually such infections are achieved
through computer hard drive, floppy, CD, removable storage device and internet.
The main dangers of computer virus include: abnormal monitor displaying, destroying saved
data, changing contents saved in discs, disturbing normal work, slowing down of computer
processing speed, furthermore causing computer death, eventually disabling the computer.
Major behavior and damages of computer virus:
1.Directly destroy computer data excited by virus
Most viruses will directly destroy important computer data when excited, such as formatting
disc, altering registry form and content, deleting important files or replacing file with rubbish data,
and destroying CMOS settings.
2.Occupy disc space and destroy data
Virus parasitizing disc will occupy disc space.
The boot virus will occupy the booting sector, meanwhile transfer the original booting sector
into different sector, in other words, the boot virus will cover a disc sector. The data in this covered
sector will be lost permanently and could not be recovered.
File virus will infect through DOS functions, which can detect the available space of disc, write
the infected part onto the blank part of disc. Therefore it will not destroy the original data during
infection but will illegally occupy disc space. Some file virus can infect lots of files in a very short
period of time. Every infected file will be bigger than before in different extent, which will make
severe waste of disc space.
3.Possess system resources
Most viruses permanently stay in memory dynamically, which will possess part of system
resources. The memory length possessed by virus is basically the same as that of the virus itself.
Virus takes over memory, decreases the availability of memory and furthermore some software is
disabled. Besides, virus will also occupy ISR, disturbing the process of system. Many functions of
DL-0810 Digital Minilab Operation Manual
110 Shanghai Doli Photographic Equipment Co., Ltd
computer OS are achieved through User Break technology. In order to transfer excitation, virus will
often amend some correlated relay address then disturb the process of system.
4.Affecting computer speed
Not only disturbing the system process, the virus will affect the speed of computer.
Main Characteristics: In order to judge the conditions of infection excitation, the virus will
monitor the work status of computer. Act as self-protection, static virus on disc is encrypted; the
dynamic ones in memory are also encrypted. Every time when CPU addresses the location of virus,
it will run a program to decrypt the encrypted virus into legal CPU command and execute. And the
virus will be encrypted again. This constant battle will cost CPU tremendous waste on its resources.
5.Affecting compatibility of virus on system
Compatibility is an important index of computer software. Software with good compatibility
can be run under different circumstances of various computers; on the contrary the software with
poor compatibility is nit-picking on the running condition, such as computer model or version of OS.
The creator of virus usually will not test the virus in various situations; therefore the compatibility of
virus is poor, which often results in computer death.
How to defend virus attack:
If DL-0810 digital minilab is infected with virus, the efficiency of the machine is going to be
debasing, even important data saved in disc will be destroyed, and resulting in system collapse and
the user will suffer subsequently.
We recommend that the user take precaution at all time:
1. Strictly prohibit installing pirated software in the system. All operation system and the other
software installed in the machine are legally registered.
2. Anti-virus software must be activated when the machine is running, enabling surveillance of the
system.
3. “Prevent illness at the mouth”, carefully check all media brought by customers with virus killing
software.
4. Periodically update the anti-virus software.
DL-0810 Digital Minilab Operation Manual
Shanghai Doli Photographic Equipment Co., Ltd 111
Appendix IV
Statement
This digital minilab is approbated by the National Laboratory of America. We do
not offer the main power supply plug; please equip the 30 ampere rating power supply
plug with three cores before start the machine.
The chemicals are not included in the machine.