Upload
avandetq15
View
233
Download
1
Embed Size (px)
Citation preview
7/27/2019 09 20R300 1 Data Acquisition Control Module
1/82
111/29/2013
Describe the Procedure to Build Control
Modules
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
2/82
Honeywell
2
11/29/2013
Introduction
In this lesson you will learn aboutExperion control modules
At the conclusion of this lesson,you will be able to:
Build and edit control modules
Load, activate and monitorcontrol modules
Insert an OLE object in a controlmodule
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
3/82
Honeywell
3
11/29/2013
Topics
Building and Editing Control Modules
Loading, Activating, and Monitoring Control Modules
Inserting an OLE Object in a Control Module
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
4/82
Honeywell
4
11/29/2013
Creating a Control Module (CM)
Sequentially numbered namegiven by Control Builder
Blank CM
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
5/82
Honeywell
5
11/29/2013
Building a CMAssigning CMs to the CEE
1
2
3
5
6
4
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
6/82
Honeywell
6
11/29/2013
Creating a CMDrag and Drop
Drag and
Drop
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
7/82
Honeywell
7
11/29/2013
Configuring a CM
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
8/82
Honeywell
8
11/29/2013
Configuring a CMMain Tab
Name and itemname
Parent asset
Execution period
Execution order inCEE and ExecutionPhase
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
9/82
Honeywell
9
11/29/2013
Configuring a CMExecution Cycle
Execution period and phase = execution cycle
Examples:
A CM with a one second execution period (1000 ms) and a phase of0 would execute at phase 0 and again at phase 20
A CM with an execution period of 200 milliseconds and a phase of 1will execute in cycles1, 5, 9, ... 37
8
PHASE
7654321
0
0
109
03938371211
50100 500450400350300250200150 2000
1850600550 1900
1950
TIME (ms)
This execution cyclehas 40 timing phases of
50 ms each
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
10/82
Honeywell
10
11/29/2013
CPU Loading
CEEdetail
display
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
11/82
Honeywell
11
11/29/2013
Together, the CM execution periodand phase define the:
Question 1: CM Period and Phase
Yes! The execution period and phase of a CMdefine the execution cycle.
Click anywhere to continue
No. The execution period and phase of a CMdefine the execution cycle.
Click anywhere to continue.
No. The execution period and phase of a CMdefine the execution cycle.
Click anywhere to continue.
No. The execution period and phase of a CMdefine the execution cycle.
Click anywhere to continue.
Correct - Click anywhere to continueIncorrect - Click anywhere to continueYou answered this correctly!
Your answer:The correct answer is:
You did not answer this question completelyYou must answer the question before
continuing
Submit Clear
A) Execution cycle
B) Execution phase hour
C) Execution phase minute
D) Execution order
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
12/82
Honeywell
12
11/29/2013
Building a CMInserting Function Blocks
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
13/82
Honeywell
13
11/29/2013
Function Block Execution Order in the CM
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
14/82
Honeywell
14
11/29/2013
Connecting Function Blocks with the Wiring Tool
Not yet
connected
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
15/82
Honeywell
15
11/29/2013
Analog loop CM
Building CMs
1
2
3
4
3
3
5
5
3
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
16/82
Honeywell
16
11/29/2013
Building CMs, contd.
Device control CM
Expandedto showfunctionblocks
Logic/interlocks
Inputs
Outputs
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
17/82
Honeywell
17
11/29/2013
Permissive/Interlocks
Device control detail display
2-state
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
18/82
Honeywell
18
11/29/2013
Which of these is a definition ofthe Execution Orderin CM?
Question 2: Execution Order in a CM
No. "Execution Order in a CM" is the sequentialexecution order of function blocks in a CM.
Click anywhere to continue.
No. "Execution Order in a CM" is the sequentialexecution order of function blocks in a CM.
Click anywhere to continue.
Yes! "Execution Order in a CM" is the sequentialexecution order of function blocks in a CM.
Click anywhere to continue.
Correct - Click anywhere to continueIncorrect - Click anywhere to continueYou answered this correctly!
Your answer:The correct answer is:
You did not answer this question completelyYou must answer the question before
continuing
Submit Clear
No. "Execution Order in a CM" is the sequentialexecution order of function blocks in a CM.
Click anywhere to continue.
A) All function blocks with the sameexecution order in multiple CMsare executed in parallel
B) The execution cycle of the CMin the CEE
C) The execution phase of thefunction block in the CEE
D) The sequential execution orderof function blocks in a CM
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
19/82
Honeywell
19
11/29/2013
Topics
Building and Editing Control Modules
Loading, Activating, and Monitoring Control Modules
Inserting an OLE Object in a Control Module
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
20/82
Honeywell
20
11/29/2013
Loading CMs
1
3
2
Right-click
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
21/82
Honeywell
21
11/29/2013
Loading CMs, contd.
Check the
appropriate boxes
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
22/82
Honeywell
22
11/29/2013
Activating/Inactivating CMs
Right-click
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
23/82
Honeywell
23
11/29/2013
Monitoring/Chart Visualization
Monitoring CMsScale Factor
Scale Factor
Icon
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
24/82
Honeywell
24
11/29/2013
Topics
Building and Editing Control Modules
Loading, Activating, and Monitoring Control Modules
Inserting an OLE Object in a Control Module
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
25/82
Honeywell
25
11/29/2013
Inserting a Video Clip in a CM
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
26/82
Honeywell
26
11/29/2013
Question 3: Loading Control Modules
Incorrect. "Left-click the CPM in the Project tab andselect Load" is the wrong answer. You must RIGHT-click the CPM in the Project tab to select the Load
option.
Click anywhere to continue.
Incorrect. "Left-click the CPM in the Project tab andselect Load" is the wrong answer. You must RIGHT-click the CPM in the Project tab to select the Load
option.Click anywhere to continue.
Incorrect. "Left-click the CPM in the Project tab andselect Load" is the wrong answer. You must RIGHT-click the CPM in the Project tab to select the Load
option.
Click anywhere to continue.
Correct! "Left-click the CPM in the Project tab andselect Load" is the wrong answer. You must RIGHT-click the CPM in the Project tab to select the Load
option.
Click anywhere to continue.
Correct - Click anywhere to continueIncorrect - Click anywhere to continueYou answered this correctly!
Your answer:The correct answer is:
You did not answer this question completelyYou must answer the question before
continuing
Submit Clear
Which of the following is not a way to load a control module?
A) Select the corresponding CM in the
Project tab and then selectController > Load
B) Select the CM or IOM in the Projecttab and select the down arrow
C) Select the CM or IOM in the
Monitoring tab and select thedown arrow
D) Left-click the CM in theProject tab and select Load
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
27/82
Honeywell
27
11/29/2013
Playing the Video
Right-click video clip
Select Play
Works the same in Station
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
28/82
Honeywell
28
11/29/2013
Summary
When building, loading, activating, and monitoring a CM in ControlBuilder, remember:
A new CM is automatically assigned a unique, sequential name
The execution phase and period of the CM defines the execution cycle
Cycle overruns can occur when the scheduled processing for a cycle does
not finish by the start of the next cycle
Function blocks execute in ascending order beginning with the block havingthe lowest execution order value
You can load a CM from the Project tree using the Control Builder Controller
menu
You can view an activated CM in the Monitoring tree of Control Builder or inthe associated detail display in Station
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
29/82
Honeywell
29
11/29/2013
Conclusion
Describe the Procedure to Build Control Modules
Complet ion
Cert i f icate
Proceed to the next lesson in your course material
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
30/82
Honeywell
30
11/29/2013
This page intentionally left blank
Data Acquisition Control Module
Describe the Procedure to Build Control Modules
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
31/82
3111/29/2013
Describe Bulk Build Functionality
Data Acquisition Control Module
Describe Bulk Build Functionality
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
32/82
Honeywell
32
11/29/2013
Introduction
In this lesson you will learn to use the Bulk Build tool inControl Builder
At the conclusion of this lesson, you will be able to describe how toquickly build multiple control modules of the same type using theBulk Build tool
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
33/82
Honeywell
33
11/29/2013
Topics
Bulk Build Procedure Overview
Bulk Build Procedure
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
34/82
Honeywell
34
11/29/2013
Features of the Bulk Build Tool
Bulk Build:
Productivity tool used to generate large quantities of control strategiesoutside of Control Builder
Principle is very similar to bulk edit function parameters in Excel
Licensed tool option
Bulk Build supports the following components:
Control modules
Sequential control modules
Fieldbus devices
I/O modules
User templates (instances of templates and templates themselves)
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
35/82
Honeywell
35
11/29/2013
Bulk Build Procedure Overview
Create a typical (standard) control strategy
Create copies of the typical using the bulkbuild tool
Export the copies of the typical to an Excelspreadsheet or other qualified media
Manipulate the Excel spreadsheet(multiplies the typical control strategy andchanges the required parameters)
Read the Excel spreadsheet back intoControl Builder, which creates theindividual control strategies (uses normalconfiguration checks)
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
36/82
Honeywell
36
11/29/2013
Topics
Bulk Build Procedure Overview
Bulk Build Procedure
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
37/82
Honeywell
37
11/29/2013
Create the Bulk Build List
Tools > Bulk Build > Create Bulk Build List
Invoke CreateBulk Build List
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
38/82
Honeywell
38
11/29/2013
Select a Typical Control Strategy
Select a typicalcontrol strategy
Set copy name
and count
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
39/82
Honeywell
39
11/29/2013
Configure Prefix and Suffix
Number of copies to createSelected Typical
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
40/82
Honeywell
40
11/29/2013
Configure Tag Names
Add Leading Zeros
Ex: 00PIC0102
Use Alpha SequenceAdd letter to eachblock nameEx: PIC0102A, B
Add UnderscoreSeparator Ex: PIC0102_X
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
41/82
Honeywell
41
11/29/2013
Configure Prefix and Suffix
Add prefix or suffix
Add prefix or suffix,then start number and
increment amount
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
42/82
Honeywell
42
11/29/2013
Select Parameters
Result is updated
Select blockparameter forBulk Build list
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
43/82
Honeywell
43
11/29/2013
Select Parameters, contd.
Select block
Parameters of
selected block
Parameter selected
for typical control
strategy
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
44/82
Honeywell
44
11/29/2013
Select Parameters, contd.
Result is updated
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
45/82
Honeywell
45
11/29/2013
Select Path
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
46/82
Honeywell
46
11/29/2013
Modify Parameters in Excel
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
47/82
Honeywell
47
11/29/2013
Modify Parameters in Excel, contd.
Make modificationsas desired in therequired CM
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
48/82
Honeywell
48
11/29/2013
Read Excel File
Tools > Bulk Build > Read Bulk Build List
Invoke ReadBulk Build List
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
49/82
Honeywell
49
11/29/2013
Validate and Build Control Strategies
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
50/82
Honeywell
50
11/29/2013
Validate and Build Control Strategies, contd.
Select to replaceexisting, when desired
Select Validate
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
51/82
Honeywell
51
11/29/2013
Validation Report
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
52/82
Honeywell
52
11/29/2013
Validate and Build Control Strategies, contd.
Select Build
Ordering Build.
Building blocks.
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
53/82
Honeywell
53
11/29/2013
Build Report
View reportafter bulk build
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
H llC
7/27/2019 09 20R300 1 Data Acquisition Control Module
54/82
Honeywell
54
11/29/2013
New CMs
New CMs availablein the Project
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
H llQ ti 1 B lk B ild T l
7/27/2019 09 20R300 1 Data Acquisition Control Module
55/82
Honeywell
55
11/29/2013
Question 1: Bulk Build Tool
Incorrect. The Bulk Build tool is used to generatemultiple control strategies outside Control Builder.
Click anywhere to continue.
Correct! The Bulk Build tool is used to generatemultiple control strategies outside Control Builder.
Click anywhere to continue.
Incorrect. The Bulk Build tool is used to generatemultiple control strategies outside Control Builder.
Click anywhere to continue.
Incorrect. The Bulk Build tool is used to generatemultiple control strategies outside Control Builder.
Click anywhere to continue.
Correct - Click anywhere to continueIncorrect - Click anywhere to continueYou answered this correctly!
Your answer:The correct answer is:
You did not answer this question completelyYou must answer the question beforecontinuing
Submit Clear
The Bulk Build tool is used to:
A) Create EB files for C200/C300
control modules
B) Generate large quantities ofcontrol strategies outside ControlBuilder
C) Export control modules to otherERDBs
D) All of the above
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
H llS
7/27/2019 09 20R300 1 Data Acquisition Control Module
56/82
Honeywell
56
11/29/2013
Summary
The Bulk Build tool:
Exports multiple copies of a typical control strategy to an Excel spreadsheet
where each copy can be modified
Imports the edited Excel spreadsheet back into Control Builder which appliesthe normal configuration checks and creates the individual control strategies
Supports the following components
Control modules
Sequential control modules
Fieldbus devices
I/O modules
User templates (instances of templates and templates themselves)
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
H llC l i
7/27/2019 09 20R300 1 Data Acquisition Control Module
57/82
Honeywell
57
11/29/2013
Conclusion
Describe Bulk Build Functionality
Complet ion
Cert i f icate
Proceed to the next lesson in your course material
Data Acquisition Control Module
Describe Bulk Build Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
H ll
7/27/2019 09 20R300 1 Data Acquisition Control Module
58/82
Honeywell
58
11/29/2013
This page intentionally left blank
Data Acquisition Control Module
Describe Bulk Build Functionality
7/27/2019 09 20R300 1 Data Acquisition Control Module
59/82
5911/29/2013
Describe Bulk Edit Parameters Functionality
Data Acquisition Control Module
Describe Bulk Edit Parameters Functionality
Data Acquisition Control Module
Describe Bulk Edit Parameters Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellIntroduction
7/27/2019 09 20R300 1 Data Acquisition Control Module
60/82
Honeywell
60
11/29/2013
Introduction
In this lesson you will learn how to use the bulk edit parameters tool inControl Builder
At the conclusion of this lesson,you will know how touse the tool to:
Export tags and parameters from
a Control Builder project to anExcel spreadsheet
Modify the parameters in anExcel spreadsheet
Read the parameters into aControl Builder project
Data Acquisition Control Module
Describe Bulk Edit Parameters Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellCreate Bulk Edit List
7/27/2019 09 20R300 1 Data Acquisition Control Module
61/82
Honeywell
61
11/29/2013
Create Bulk Edit List
Bulk Edit Parameters
Utility which allows you to change the value of multiple parameters in asingle operation by importing a prepared list of edits
Tools > Bulk Edit Parameters > Create Bulk Edit List
Data Acquisition Control Module
Describe Bulk Edit Parameters Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellCreate Bulk Edit List contd
7/27/2019 09 20R300 1 Data Acquisition Control Module
62/82
Honeywell
6211/29/2013
Create Bulk Edit List, contd.
The Show All Points button is used to populate the "Available Points"selection list with the names of all points in the database
Data Acquisition Control Module
Describe Bulk Edit Parameters Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellCreate Bulk Edit List contd
7/27/2019 09 20R300 1 Data Acquisition Control Module
63/82
Honeywell
6311/29/2013
Create Bulk Edit List , contd.
Select the points and parameters
The selected points
The parameter(s)
to be modified
Data Acquisition Control Module
Describe Bulk Edit Parameters Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellCreate Bulk Edit List contd
7/27/2019 09 20R300 1 Data Acquisition Control Module
64/82
Honeywell
6411/29/2013
Create Bulk Edit List , contd.
Build the Excel file
Browse todesiredoutput path
Name theoutput file
Select theoutputfile type
Save
Data Acquisition Control Module
Describe Bulk Edit Parameters Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellEdit Parameters
7/27/2019 09 20R300 1 Data Acquisition Control Module
65/82
Honeywell
6511/29/2013
Edit Parameters
Open the created BulkEdit.xls file in Excel
Use the single quotebefore numbers 100Do not change oradd tag names.Keep columns in order.
Edit the parametersas necessary
Data Acquisition Control Module
Describe Bulk Edit Parameters Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellRead Bulk Edit List
7/27/2019 09 20R300 1 Data Acquisition Control Module
66/82
Honeywell
6611/29/2013
Read Bulk Edit List
Select Start
Select UpdateMonitor or Project
Data Acquisition Control Module
Describe Bulk Edit Parameters Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellQuestion 1: Bulk Edit Parameters Tool
7/27/2019 09 20R300 1 Data Acquisition Control Module
67/82
Honeywell
6711/29/2013
Question 1: Bulk Edit Parameters Tool
Incorrect. The Bulk Edit Parameters tool is used to changeselected parameters in selected control modules.
Click anywhere to continue.
Incorrect. The Bulk Edit Parameters tool is used to changeselected parameters in selected control modules.
Click anywhere to continue.
Incorrect. The Bulk Edit Parameters tool is used to changeselected parameters in selected control modules.
Click anywhere to continue.
Correct! The Bulk Edit Parameters tool is used to changeselected parameters in selected control modules.
Click anywhere to continue.
Correct - Click anywhere to continueIncorrect - Click anywhere to continueYou answered this correctly!Your answer:The correct answer is:You did not answer this question completely
You must answer the question beforecontinuing
Submit Clear
The bulk edit parameters tool is used to:
A) As an online tool to activate or inactivate multiplecontrol modules at once
B) To copy the control module to the monitoring tab
C) To export selected control modules
D) To change selected parameters in selected controlmodules
Data Acquisition Control Module
Describe Bulk Edit Parameters Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellSummary
7/27/2019 09 20R300 1 Data Acquisition Control Module
68/82
Honeywell
6811/29/2013
Summary
You can use the Bulk Edit Parameters tool to:
Export tags and parameters from a Control Builder project to an Excelspreadsheet
Modify the parameters in an Excel spreadsheet
Do not change or add tag names
Keep columns in order
Use the single quote before numbers 100
Read the parameters into a Control Builder project
Data Acquisition Control Module
Describe Bulk Edit Parameters Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellConclusion
7/27/2019 09 20R300 1 Data Acquisition Control Module
69/82
Honeywell
6911/29/2013
Conclusion
Describe Bulk Edit Parameters Functionality
Complet ion
Cert i f icate
Proceed to the Configu re the Data Acqu is i t ion Contro l Module
lab exercise and the sixlab exercises that follow it
Data Acquisition Control Module
Describe Bulk Edit Parameters Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
Honeywell
7/27/2019 09 20R300 1 Data Acquisition Control Module
70/82
Honeywell
7011/29/2013
This page intentionally left blank
Data Acquisition Control Module
Describe Bulk Edit Parameters Functionality
EXP20R300 - EPKS CEE C200/C300/ACE
7/27/2019 09 20R300 1 Data Acquisition Control Module
71/82
7111/29/2013
Describe the Block Name References in CMand SCM
Data Acquisition Control Module
Describe the Block Name References in CM and SCM
Data Acquisition Control Module
Describe the Block Name References in CM and SCM
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellIntroduction
7/27/2019 09 20R300 1 Data Acquisition Control Module
72/82
Honeywell
7211/29/2013
Introduction
In this lesson you will learn about:
Block name references in CM and SCM
At the conclusion of this lesson, you will be able to:
Reference a parameter in CM
Reference a parameter in SCM
Data Acquisition Control Module
Describe the Block Name References in CM and SCM
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellApplication
7/27/2019 09 20R300 1 Data Acquisition Control Module
73/82
Honeywell
7311/29/2013
Application
Applies to parameter connector and parameter references
Applies to expression used in SCM and all Calc Blocks
Provides a simpler input mechanism for expression references
The user does not have to enter more information than required
Shorten the string for references within a container, or within a basic block,
so a tag name does not take up more of the viewing area provided thannecessary
Shorten the number of characters used in an expression
Data Acquisition Control Module
Describe the Block Name References in CM and SCM
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellRelative Reference Display Option
7/27/2019 09 20R300 1 Data Acquisition Control Module
74/82
Honeywell
7411/29/2013
Relative Reference Display Option
Select the Short Name Option
Data Acquisition Control Module
Describe the Block Name References in CM and SCM
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellDisplay Option for Expression in Parameter Reference
7/27/2019 09 20R300 1 Data Acquisition Control Module
75/82
y
7511/29/2013
Display Option for Expression in Parameter Reference
Reference to a container parameter will be displayed as $.parameter in
the expression present in the step of an SCM
Reference to a parameter which is present on the same block will be
displayed as parameter name in the expression of the Auxiliary block
Reference to a parameter on other basic block will be displayed as
Blockname.parameter
Short Name is applicable to reference within the same CM
Data Acquisition Control ModuleDescribe the Block Name References in CM and SCM
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellExpression ExampleSCM
7/27/2019 09 20R300 1 Data Acquisition Control Module
76/82
y
7611/29/2013
p p
Data Acquisition Control ModuleDescribe the Block Name References in CM and SCM
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellExpression ExampleCM
7/27/2019 09 20R300 1 Data Acquisition Control Module
77/82
y
7711/29/2013
p p
Data Acquisition Control ModuleDescribe the Block Name References in CM and SCM
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellExpression ExampleCM
7/27/2019 09 20R300 1 Data Acquisition Control Module
78/82
y
7811/29/2013
p p
Data Acquisition Control ModuleDescribe the Block Name References in CM and SCM
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellQuestion 1: Short Names
7/27/2019 09 20R300 1 Data Acquisition Control Module
79/82
y
7911/29/2013
Correct - Click anywhere to continueIncorrect - Click anywhere to continueYou answered this correctly!
Your answer:The correct answer is:
You did not answer this question completelyYou must answer the question before
continuing
Submit Clear
No. The correct answer is "All of the above". Allof these statements are correct about Short
Names.
Click anywhere to continue.
No. The correct answer is "All of the above". Allof these statements are correct about Short
Names.
Click anywhere to continue.
No. The correct answer is "All of the above". Allof these statements are correct about Short
Names.
Click anywhere to continue.
No. The correct answer is "All of the above". Allof these statements are correct about Short
Names.
Click anywhere to continue.
Yes! The correct answer is "All of the above". Allof these statements are correct about Short
Names.
Click anywhere to continue.
Which of the following statements is true about Short Names?
A) Optional setting
B) Applies to parameter connector and parameterreferences
C) Applies to expression used in SCM and all CalcBlocks
D) Reference to a container parameter will be displayedas "$.parameter" in the expression present in thestep of a SCM
E) All of the above
Data Acquisition Control ModuleDescribe the Block Name References in CM and SCM
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellSummary
7/27/2019 09 20R300 1 Data Acquisition Control Module
80/82
y
8011/29/2013
y
The block name references in CM and SCM function allows you to:
Do parameter reference in CM
Do parameter reference in SCM
Data Acquisition Control ModuleDescribe the Block Name References in CM and SCM
EXP20R300 - EPKS CEE C200/C300/ACE
HoneywellConclusion
7/27/2019 09 20R300 1 Data Acquisition Control Module
81/82
8111/29/2013
Describe the Block Name References in CM and SCM
Complet ion
Cert i f icate
Proceed to the next lesson in your course material
Data Acquisition Control ModuleDescribe the Block Name References in CM and SCM
EXP20R300 - EPKS CEE C200/C300/ACE
Honeywell
7/27/2019 09 20R300 1 Data Acquisition Control Module
82/82
This page intentionally left blank