Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
THANK YOUWe appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this adjustable bracket. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
LOW PROFILE ADJUSTABLE BRACKET
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item #235856, 235860, 23586 Model # LPAB10, LPAB12, LPAB14
2
Table of Contents
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Planning Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Bracket Size Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Number of Brackets Needed . . . . . . . . . . . . . . . . . . . . . . . . . 4Bracket Spacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Mounting Option 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Mounting Option 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Mounting Option 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Adjusting Set Screws & Installing Countertop . . . . . . . . . . . 6
Warranty
LIMITED WARRANTY
WHAT IS COVEREDThis product is guaranteed to be free from defects in material and workmanship under normal and proper usage for a period of five (5) years from the date of purchase.
WHAT IS NOT COVEREDThe Victory Bracket has an intended purpose. If used outside of that purpose, the product will not be warranted and Hampton Bay shall not be held responsible for any damage that may occur due to accident, abuse, misuse or negligence. The following products are not covered under this warranty: (1) brackets that have been altered, modified, neglected or poorly maintained; (2) brackets that are purchased in used condition, not in original packaging, or from an unauthorized dealer or distributor; (3) brackets that have been damaged during transit or shipping.
The following damages are not covered under this warranty: (1) damage to persons or property due to improperly installed or repaired brackets; (2) damage from causes other than defects in materials and workmanship such as a purchaser’s or installer’s lack of skill, competence or experience.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.
3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Installation
PLANNING INSTALLATION
NOTE: Wall thickness must be between 3/4 in. and 4 in..
NOTE: Place bracket directly under seams in countertop.
TOOLS REQUIRED
Phillips screw driver
Drill ¼ in. drill bit Level
Router Wood chisel Caulk
HARDWARE INCLUDED
NOTE: Hardware shown to actual size.
AA BB CC
Part Description Quantity
AA Phillips head wood screws 2
BB Set screws 2
CC Hex wrench (not to scale) 1
4
Pre-Installation (continued)
PACKAGE CONTENTS
Part Description Quantity
A Low Profile Adjustable Bracket 1
5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Installation (continued)
1 Select the correct bracket size
□ The appropriate bracket size is determined by the wall thickness and overhang length.
□ Use the table below to find the correct bracket size for your countertop.
2 Determine the number of brackets needed
□ Generally, you will need one bracket every 12-18 in..
□ The table below gives bracket requirements for countertops of various widths.
3 Calculate the bracket spacing
□ The first and last brackets should be placed 3 in. from the end/corner of the countertop.
□ The spacing between brackets can be determined using the formula below:
4 Choose your desired mounting option
Spacing (S) = (W) Width - 6
# of brackets - 1
Overhang Length (in.)
Wal
l Thi
ckne
ss (i
n.) 8 9 10 11 12 13 14 15 16 17 18
¾ 8 8 8 10 10 10 12 12 12 14 14
2 8 8 10 10 10 12 12 12 14 14 16
3 10 10 10 12 12 12 14 14 14 16 16
4 10 10 12 12 12 14 14 14 16 16 16
Width Brackets
24 – 28 in. 2
29 – 48 in. 3
49 – 68 in. 4
69 – 88 in. 5
89 – 108 in. 6
S S S S
S W
W
Option 1: Mount to Cabinet Wall thickness usually ¾ in. to 2 in.
Option 3: Two Level, Wall Mount Wall thickness usually 4 in.
Option 2: Single Level, Wall Mount Wall thickness usually 4 in.
6
Installation
1 Option 1: Mounting Bracket to Back or Side of Cabinet
NOTE: If cabinet wall is less than ¾ in. thick, attach ¾ in. plywood to inside of cabinet using four wood screws (not included).
□ Notch the top of the wall ¼ in. by 2-1/8 in.. Cut a ¼ in. radius on the inside wall.
□ If mounting to the side of the cabinet, use a jigsaw to cut a slot at least ½ in. by 2-1/8 in. in any support that obstructs the bracket’s fit.
□ Using the bracket as a template, mark and drill 1/8 in. pilot holes ½ in. deep.
□ Make sure the bracket fits tightly on the wall surface and there is a 1/16 in. gap (very important) from the top of the bracket to the top of the wall. If not, remove material in the notch or the radius.
□ Attach the bracket to the wall using the two (2) ¾ in. wood screws (AA), one in each the bottom and middle holes.
□ See Adjusting Set Screws and Installing Countertop on page 7.
2 Option 2: Mounting Bracket to Front of Cabinet with Doors
NOTE: If there is not a 2 in. wide surface to mount the bracket on the front wall, a 1 in. x 3 in. x 12 in. piece of wood can be mounted to the cabinet sidewall several inches away from the front face. The distance from the front face to the back side of the 1 in. x 3 in. x 12 in. becomes the wall thickness when sizing the bracket.
□ Attach each bracket to a 1 in. x 3 in. x 12 in. piece of wood using the two (2) wood screws (AA) provided.
□ Fit-check the bracket on the sidewall and mark the top wall of the front cabinet where each bracket is located.
□ Notch the top wall ¼ in. by 2-1/8 in. at each marked location.
□ Attach the 1 in. x 3 in. x 12 in. pieces of wood to the sides of the cabinet using three (3) wood screws (not provided), making sure that there is ¼ in. gap (very important) from the top of the 1 in. x 3 in. x 12 in. pieces of wood to the top of wall.
□ See Adjusting Set Screws and Installing Countertop on page 7.
AA
AA
7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation (continued)
3 Option 3: Mounting Bracket to Wall
□ Install 2x4 in. cross braces between the wall studs to support the brackets. The brackets can be mounted on a stud or any location on the cross braces.
□ For a single-level countertop, notch the top of the 2x4 in. cap ¼ in. by 2-1/8 in. and cut a ¼ in. radius on the inside wall.
□ For a two-level countertop, make additional notches on the back of the wall ½ in. deep by 2-1/8 in. so the backsplash or finished surface can cover the brackets.
□ Make sure the brackets fit tightly on the wall surface and there is a 1⁄16 in. gap (very important) from the tops of the brackets to top of the wall.
□ Attach each bracket to the wall using two (2) ¾ in. wood screws (AA), one in each the bottom and middle holes.
□ Continue to Adjusting Set Screws and Installing Countertop.
4 Adjusting Set Screws and Installing Countertop
□ Turn the set screws (BB) to level the end of the bracket with other parts of the counter.
□ Use a level to confirm the end of the bracket is level and both set screws (BB) are equally engaged.
□ Turn both set screws (BB) the additional of number of turns listed in the table below. This provides support at the end of the bracket and ensures uniform support of your specific countertop by preloading the bracket.
□ Install the countertop and apply caulk around the perimeter of the bracket under the countertop.
Counter Weight (lbs/sq ft)
Bracket Size
18 1¼ in. granite
12¾ in. granite
6lighter material
8 in. 2.5 turns 1.7 turns 0.8 turns
10 in. 3 turns 2 turns 1 turns
12 in. 3.5 turns 2.3 turns 1.2 turns
14 in. 4 turns 2.7 turns 1.3 turns
16 in. 4.5 turns 3 turns 1.5 turns
BB
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.