1

Analog – ISDN Converter

Connected to Avaya Integral Enterprise PBX

Analog – ISDN Converter Connected to Avaya Integral Enterprise

1…8Analog trunk/tie

1…4ISDN trunk

1 2 3 4 5 6

Avaya Integral Enterprisewith ADM media module

Analog – ISDN Converter

Analog Network

One Analog – ISDN Converter is connected to ADM media module with one STSM sub modules for 8 analog trunks.

For each additional converter, one STSM sub module is needed.

Support of CLIP on analog line Up to 32 trunk lines, only one slot in IE module for ADM

board instead of 4 slots with ATx boards Converter is connected to Integral Enterprise via ADM Media

Module with STSM Submodule No Media Module for analog trunk (ATA,ATB,ATC) needed

Analog – ISDN Converter Key features

Power LED

Analog – ISDN Converter Front view

Analog – ISDN Converter Rear view

Line connectors

USB connectors

IEC socket

Main switch

Fuse

8 analog trunk lines 4 internal T0 port to connect to the BRA port of PBX 4 internal T0 port for synchronization with an ISDN exchange line in

hybrid mode Line and PBX connections with terminal strips 4 USB ports for individual converter programming IEC socket Fuse 200mA Power switch

Analog – ISDN Converter Connection Options / rear

Analog – ISDN Converter Features

8 analog trunk line ports 4 internal T0 port for connection with BRA port of ISDN PBX Caller ID (CLIP and CNIP) including date and time Call forwarding (busy / no reply / unconditional) Call brokerage (HOLD) Conference calls (3PTY) Automatic call back (CCBS) Configuration software for Windows (2000/XP)

Tone (DTMF) and Pulse dialling Recognition of dial and busy tone Number and name presentation (CLIP/CNIP) with date and time Remedial suppression of the own number (CLIR) Recognition of charge pulses (12 kHz / 16 kHz) Flash at trunk line, duration adjustable Call forwarding on busy, if nobody answers the call, permanent

(CFB, CFNR, CFU) Brokering (HOLD); flash time adjustable Three-party conference call (3PTY) Automatic callback to busy subscriber (CCBS) Operating key sequences adjustable

* If supported and activated by network provider

Analog – ISDN Converter Trunk line features *

Point to Multipoint (PTMP) and Point to Point (PTP) connection Number and name presentation (CLIP/CNIP) with date and time Remedial suppression of the own number (CLIR) Charge information during the call (AOCD) Call forwarding on busy, if nobody answers the call, permanent

(CFB, CFNR, CFU) Call Brokerage (HOLD) Three-party conference call (3PTY) Automatic callback to busy subscriber (CCBS)

* Depending on the functions which are available at the trunk line

Analog – ISDN Converter ISDN features *

Operating voltage: 230V AC; +/-10 %; 50 Hz, Internal power supply, fuse 200mA

Power consumption 12 W min., 24 W max. Exchange line connection: 8 analog ports, DTMF, CLIP/CNIP support Internal S0: 4 BRA, Point-to-Multipoint Connection

(PTMP), Euro ISDN (DSS-1) S0-synchronisation port: Point-to-Multipoint (PTMP) or Point-to-

Point (PTP) Connection PC/data connection: USB (V1.1, compatible to V2.0) Case: Metal, 1 HU, 19“ chassis

with Alloy front panel Dimensions: (w x h x d) 483 mm x 44,4 mm x 300

mm Weight: approx. 3,2 kg Safety: CE

Analog – ISDN Converter Technical data

Meiknologic GmbHHölderlinweg 19a 64285 Darmstadt

Germany

Phone: +49-6151-6698653Fax: +49-6151-912223

E-Mail: info@meiknologic.de

Analog – ISDN Converter Supplier