1Loscam Limited

2Loscam Limited

Pallets should be stored in a clean and dry facility

Secure and with adequate air circulation, free from the possibility of flooding and from excessive exposure to dust or other harmful environmental contaminants

Conditions similar to those under which consumer products are stored

PROPER STORAGE

HOW DO WE AVOID DAMAGED PALLETS ?

3Loscam Limited

HOW DO WE AVOID DAMAGED PALLETS ?

PROPER STORAGE

TBR pallets should be dehired

4Loscam Limited

Proper Pallet Handling

5Loscam Limited

Moving pallets with forklift truckThe most natural and efficient way to

move pallets around is by forklift trucks

However, the following are conditions that forklift truck operator needs to be mindful of:

6Loscam Limited

Moving pallets with forklift trucks1. Make sure products

are placed securely on the pallet, and the pallet itself must be in good condition before being moved by the forklift

7Loscam Limited

Moving pallets with forklift trucks

2. Adjust distance between both forklift tynes to suit the slots between pallet blocks

8Loscam Limited

Moving pallets with forklift truck 3. When carrying pallets with products, make sure forklift tynes are raised slight off the ground, do not lift higher than 8 inches. Ensure there are no obstracles in the pallet’s way

9Loscam Limited

Moving pallets with forklift trucks 4 . Avoid carrying high loads when operating near ramp or uneven floors. When entering or exiting ramps, make sure tynes are properly tilted upwards

10Loscam Limited

Moving pallets with forklift trucks 5 . Avoid using forklift tynes to push, nudge or move other pallets. Not only may it damaged the pallet and products, it can also pose safety risks to anyone nearby

11Loscam Limited

Moving pallets with forklift trucks

6. Do not over load pallets Good condition Loscam

pallets have a maximum carrying weight of 1.5 ton (dynamic load), and 4 ton (static load), block stacking

12Loscam Limited

Moving pallets with other means

Alternatively, pallets can be moved around using hand pallet jacks (hand-lift) Always inspect and ensure pallets are in good condition before use

13Loscam Limited

Using pallets inside a warehouse

Use only pallets that are in good condition, especially when pallets are stored onto racking

14Loscam Limited

Avoid using damaged pallets on racking

Damaged pallets are NOT to be use

15Loscam Limited

• Space forklift tynes are appropriately

• Ensure forklift tynes are aligned with pallets entry slot before moving the forklift truck forward

Proper Pallet Handling

16Loscam Limited

• Ensure forklift tynes are level and not tilted

• Pallets are to be lifted before the forklift tynes can be tilted

Proper Pallet Handling

17Loscam Limited

Avoid using pallets this way..

Do not use forklift tynes to move or nudge pallets, especially when pallets are loaded.

18Loscam Limited

Do not use pallets for other purposes that will contaminate the pallets or which the pallets are not intended for

Before moving pallets, make sure the pallets are stacked properly

Also avoid this..

19Loscam Limited

Avoid using pallets this way..

Do not use forklift tynes to nudge or move pallets

20Loscam Limited

Avoid using pallets this way..

Do not use forklifts to lift upside-down pallets

21Loscam Limited

Avoid using pallets this way..

Do not handle pallets if the forklift tynes are not fully inserted into pallets

22Loscam Limited

Avoid using pallets this way..

Please adhere to the following:

• Do not drop pallets• Do not use pallets for non-storage purposes• Do not attach any temporary or permanent fixtures on the pallets • Do not paint the pallets

23Loscam Limited