Upload
scot-gilbert
View
214
Download
0
Tags:
Embed Size (px)
Citation preview
2
Product Family
New addition to the DLRO10 series• Digital Low Resistance Ohmmeter 10 Amp Heavy Duty
New DLRO10HD
DLRO10 DLRO10X
3
Product Family - Existing Products
DLRO10 and DLRO10X key features:
• Hang from neck operation–Great for difficult access or
use up ladders• Power limited to 0.25W only
–Will not heat test piece• Detachable battery pack
–Continuous testing possible with optional additional battery
• 600V input protection–Without blowing a fuse
4
Product Family - Existing Products
Main Differences DLRO10
• LED display
– Visible in bright sunlight
• Three test modes
DLRO10X• LCD dot matrix backlit
• Drop down menu operation
• Settable test limits
• Result storage with memos
• Five test modes
5
New DLRO10HD
Built for harsh conditions Always ready to test Quick, intuitive, reliable testing High Accuracy
6
New DLRO10HD Features
New tough case• Built for harsh conditions• At home on bench or floor• Lid mounted pouch as std.• IP 65 with lid closed• IP 54 in operation• Smaller version of MIT / S1
case
Quality look and feel• Elastomeric, soft touch
designer front panel
7
New DLRO10HD Features
Rechargeable battery and mains operation
• High capacity 7Ah battery
• Mains operation for continuous use applications
– Production environments
• Always ready to test
– Even with flat battery
• Important competitive feature
8
New DLRO10HD Features
Rotary switches• Selecting range and test mode• Ease of operation• Intuitive• No learning time
Backlit LCD display• Noise and external voltage
indication– Important competitive
feature DH4 indicator light operation
• External voltage and test complete indication (as DLRO10)
9
New DLRO10HD Features Low or high output power
selection• Green = all <0.25W• Red = 10A <25W• Diagnostic tool• Important competitve
feature
Five test modes• Same as DLRO10X• Includes
– Auto start on contact– Auto current reversal
–EMF cancelling
10
New DLRO10HD Features
DLRO10HD 250mΩ RangesHigh Power and Low Power Output Comparison
0.0025W Max
25.0W Max
0.000001
0.00001
0.0001
0.001
0.01
0.1
1
10
100
0 0.05 0.1 0.15 0.2 0.25
Resistance
Po
wer
(W
)
Low Power250mΩ Range
High Power250mΩ Range
Low or high output power selection
• Helps to show up:
– Contamination
– Rough mating surfaces
– Frayed damaged wired
High duty cycle• 10A at 25W for <60
sec
11
New DLRO10HD Features
High Input Protection• <600V between any
terminal• Will not blow fuse• Indicates external voltage
and inhibits testing• Same as DLRO10 and
DLRO10X• Important competitive
feature
<600V
12
New DLRO10HD – Applications
During electrical manufacturing processes• Testing switches, connectors and relays
–To ensure contact resistance is within specified values.
• Cable resistance
–Too low means too much copper in cable (higher costs), too high means not enough copper (cables’ current carrying capacity compromised)
• Motors
–To determine heat rise under load, measure winding resistance, check for short circuits or open circuits.
• Generators
–To determine heat rise under load, measure winding resistance, check for short circuits or open circuits.
13
New DLRO10HD – Applications
During electrical manufacturing processes• Fuses
–To ensure resistance is within specified values.
• Cable looms
–Checking bonding and interconnections when installing in equipment, racks etc.
• UPS / Car batteries
–Carrier to plate weld resistance, High resistance indicates poor weld quality that will restrict battery’s ability to carry current.
14
New DLRO10HD – Applications
Aircraft assembly and maintenance• Main frame electrical and mechanical bonds – to ensure a stable
“ground plan” to protect aircraft from static electricity and lightning strikes.
–Static wick bonding
–Antenna bonds
–Control linkage bonding
–Battery connection and interconnection
– Integrity of structure and exhaust system
–Metallic coating resistance
15
New DLRO10HD – Applications
Railway / Railroad Industry• Strap and wire bond between rail segments – maintaining
performance of control and telephone system. Minimising power loss on three rail systems. However sometime higher test currents are specified.
• Cable joints – power system efficiency.
• Earth / ground bonds – e.g. lightning protection on structures. Ground mats, ground conductor rings, metal cladding, metal ceilings, metal floors, hand rails, seats etc. to limit step and touch potential.
• Platform edge doors – Earth / ground bonding (mainly underground systems)
16
New DLRO10HD – Applications
Aluminium refineries• Graphite electrodes – to verify density
Ship building or any metal structures• Weld quality – measure at regular intervals along weld length
looking for uniformity.
• Installed equipment bonds – to steel structure / hull.
Raw material processing, e.g. cement plants• Power carrying elements – installation and maintenance
• Ground bonds - cement is corrosive
Automotive industry• Cable leads in robot spot welders work-harden through flexing
causing strands to break. Results in poor weld quality.
17
New DLRO10HD – Applications
Power Generation and Distribution• Bus bars – lap joint tests to maintain low resistance, and hence
maintaining efficiency and reducing likely hood of fire.• Cable joints – including overhead lines. High impedance joint
can explode.• Fuses – connections
Uninterruptible Power Supply (UPS)• Battery straps – quality of connections. Preventing potential of
fire and failure to operate• Carrier to plate weld resistance – High resistance indicates poor
weld quality that will restrict battery’s ability to carry current. Military vehicles – Trucks, tanks etc.
• Installed equipment such as radio equipment - ground bonding to vehicle chassis.
18
New DLRO10HD – Applications
Buildings – wiring, lightning protection bonds• Various bond, both for power distribution and earth grounding –
check for step and touch voltage safety in fault condition.
• Conduit continuity – metal conduit, detect corroded or loose threads etc.
Pipe lines• Cathodic protection – check connection etc. Tough environment
ideal for the DLRO10HD
Wind turbines• Lightning protection – wing tip to base, or component parts in
manufacture. Long test leads available for this application.
• Earth ground bonds – various
19
DLRO10HD Customers
Power Utilities• Maintenance and commissioning departments
Electrical Contractors• Contracted to Power Utilities• Maintaining power systems
Testing Companies• Contracted to Power Utilities• Maintaining power systems
Electrical Maintenance Companies–Contracted to Power Utilities–Maintaining power systems
20
DLRO10HD Customers
Industrial/Manufacturing Plants• Using and maintaining power systems and rotating
machinery
Process Control Plants• Industrial manufacturing plant
University / Colleges• Research applications
Railways Air lines Aircraft manufacturers
21
DLRO10HD Customers
Wind turbine manufacturers Wind turbine installation contractors Car manufacturers Bus, truck, light commercial vehicle
manufacturing Electricians Defence / Government Cable Manufacturers Motor and generator manufacturers Fuse manufacturers
22
DLRO10HD Customers
Battery / UPS manufacturers and installers Electrical plant and equipment manufacturers Electronics manufacturers Aluminium refineries Cement works Ship builders Military manufacturing Pipe line installation contractors Mining industry
23
Data sheets• DLRO10, DLRO10X and DLRO10HD
Guide to low resistance testing• Covers techniques and applications for DLRO products.• Part No. AVTMDLRO/MEG-304_V03
ANSI/IEEE Standard C37.09• Section 5.14: Electrical Resistance test.
NETA• Contact resistance test recommended in equipment procedure
Megger Web Site• Electronic copies
DLRO10HD Application note• Available on website
Sales tools