1. Precautions for safety -------------------------------- 1

2. Package contents and part descriptions ------------- 2

3. How to operate ------------------------------------- 3 4. How to install ------------------------------------------ 4 5. How to playback on PC ------------------------------- 5

6. Appendix ------------------------------------------------ 6 Specifications Warranty Policy Warranty Card

Contents0

.1. Precautions for Safety

Precautions for Safety1When the device is connected to fuse box for battery power source in parking status, the battery could be completely discharged. if you leave it more than 8 hours)

Beware of operate in either lower or higher temp. than recommendable operation temp.(0 ~50 degree in Celsius)In summer or winter time, if a vehicle is disposed to the max. temp. for parking, the device will not work improperly.Please either cool down or warm up before operate the device.

Watch out not to let foreign substance go through to the device.If water or drink goes into the device, it could be causes for defect or out of order. Keep it out of humid place.

Never disassemble, repair or amend it by yourself.Defect caused from disassemble, repair or amend could break out fire or another accident. In this case you can not claim warranty service. When you need to shoot out trouble of defect, please consult with local supplier.

Precautions for Safety1Do not leave any metal substance on it.If you leave any metal substance on the part of GPS antenna installed, GPS receiving could be worse.

GPS receiving delaying time could be needed.It could take time GPS to start and receive coordinates after turn on the vehicle. It depends on circumstances such as weather.

Do not keep operating if the device does not work properly .When it smells, makes strange sound or shows abnormal symptoms, do not keep operating. Turn the device off and consult to local supplier.

Do not remove SD card while the devices such as MP3,navigation, ONE SEG is working.It may harm SD card.

Package ContentsPackage Contents and part descriptions2Cigar Jack Power CableDS-1200BracketUsers ManualSD memory card

Each Parts NamePackage Contents and part descriptions2Operating status LEDCameraBracket Hole GPS External PortSD card slotMICDC12V~24VVIDEO OUT

How to operateHow to operate34-1 How to use

Power ON/OFF Connect the cigar jack to the power port or press power button if it is in the status of OFF, it starts recording. (Orange LED On) LED changes Green color when sensor is operating and it will transfer to Orange color(regular mode) after 10 sec. since impact. After 10 sec. when quench your vehicle, POWER of device is gone (Stop recording)

After it starts recording, 24 hours later, automatically power is off. (Stop recording) when you use continuous power source from vehicle battery. Restart your vehicle for power on.

You can choose recording mode QVGA / VGA. Default mode is VGA (640x480). In SD card root folder, if you copy QVGA.cfg file and, it records in QVGA (320x240) if you delete QVGA file from root folder than it records in VGA again.

Display on time, location and speed information

You can check information about time, location and speed with your video information through exclusive viewer (Download from Homepage).

How to operateHow to operate34-2 Checking Operating and using SD Card

LED Indication

Orange Color: Continuous Recording Mode Green Color: Event Recording Mode Red Color: Error mode (check if you slotted SD card and you need to reboot the device) If you still have trouble, contact local supplier.

Viewing on the Navigation

You can view video in real time on your Navigation being connected through video cable(supplied) (Connect Video out terminal of Device to video in terminal of your Navigation) * The navigation needs to support MP4

Viewing on PC

Take out SD Card form card slot when the power is off and connecting it to your PC using Card reader(Optional), then you can see recorded videos on your PC.

How to operateHow to operate3 Folder and file name

REC folder-> You will see Full time recording and event recording file lists in recorded time order. 1) Full time recording file (Normal file)

File name: N/ 2010/ 02 /06 /06 /20 /20 Recording mode/year/month/day/hour/min./sec. Ex) N_2010_02_0606_20_20.mp4

2) Event recording (Event file)

File name: E/ 2010/ 02 /06 /06 /20 /20 Recording mode/year/month/day/hour/min./sec. Ex) E_2010_02_0606_20_20.mp4

How to operateHow to operate34-3 Continuous Recording (Permanent Recording)

We recommend you get a advice of car service center to connect continual vehicle power if you want to use this device as a parking monitor.

In case you dont use your car for 24 hours after connecting continual power, your car battery might be gone. Please check your car battery.

4G SD Card being included is not enough to memorize your long recording. We recommend you purchase extra memory(8G or 16G) and use. Please format and use it when you insert new memory card. 4-4 Built-in high quality MIC.

This device has built-in high quality MIC. In case of occurring Event, it memorize voice and sounds. You can hear the real voice and sounds of the spot through viewer program.

2G 3hours 4G 6hours8G 12hours16G 24hours

How to operateHow to operate34-5 Video Event Data Recorder Function

When there is any impact occurred from the car, this device automatically detects it and saves movies before/after the event in real time. It saves also time and 3 axis acceleration data, speed information of the car, etc. at the same time.

Impact is generated from car accident, sudden brake, sudden curve, uneven road surface and main body striking conditions, of which impact level can be adjusted. If the impact level is small, tiny brake operation is detected and movies are frequently recorded, while if the impact level is large, record is not frequently conducted but it is required to note that minor contact accident may not saved.

Movie Quality Change decides quality of movies to be recorded and can be selected to high(640X480)/ normal(320X240) movie qualities. And if you change 20 flames(out of factory) to 10 or 15 flames, and you can adjust the recording time to 10 ~ 24 hours.

* This device has auto over, write function in two way (Continual Recording and Event Recording) If data is fully filed into the SD Card, old data is automatically erased and recent data is saved. If you have any important data, please save it into the PC separately. (Continual Recording 70%, Event Recording 30%)

*This device is designed as DIY (do it yourself) product for simple and convenient installation. Installation procedure:

1. Slot the bracket into Bracket hole on the device and firmly fix it.

2. Check and select the proper place where does not disturb driving on the front window and attach the device with the suction cup.

3. In case of connecting to cigar jack power source hide cables well under the corners and insert power jack to power source. In case of connecting to continuous power source connect to fuse box for battery power source. When it is connected after 24hours later, power is off automatically. 4. After you press power button, when Orange LED is on, it indicates proper operation (full time recording)

5. After operates this device, press power button, when you see LED is off, it indicates power-off.

6. As 75A Battery is built in this device, after power off the vehicle, it still operates for sometimes before it is off

7. When you connect to continuous power, recording time duration is depending on SD card size. Example) SD card 4GB: 400min.

8. You can monitor current video status when you connect Video out cable to monitor, Navigation etc.How to install4How to install

How to install4How to install1. Tape stripping2. Bracket Combine3. Attaching the right or back side of the room mirror6. Adjusting the angle 5. Connectting Cigar cable4. Press it

How to playback on PCHow to playback on PC5 Firmware update

You can access http://www.ubtechno.co.kr/board/bbs/tb.php/bo04/49 and download firmware.

Viewer Program (PlayerAppWinGUI_091015_Securoad_GDI.zip )

Insert your SD Card intothe card reader(not including) and Insert it into your PCUSB Terminal. After downloading program and unzipping, You can see the icon of program. You can open the program with click the Icon.

Operating the viewer Program How to playback on PC5(1) Minimize Button: Minimize the Viewer Window (2) Closing Button: Close the Viewer Program(3) Viewer Screen (4) Recorded Videos List (5) Car Speed Display (6) Car Location Display(7) Recorded Date, Time Display(8) G-Sensor Information Display (9) Video Slide Control (10) Former Video play Button(11) Play / Pause Button (12) Stop Button (13) Next Video play Button(14) Folder Open Button(15) Video playing time Display(16) MAP: show the map your car is moving(17) Button for changing Resolution and Flame

SpecificationAppendix6* Customer Service A/S Center: Contact the Authorized distributer

Appendix6Before you think it is a failure Before you request service, Please read the users manual first and try to solve the problem for the following symptoms.

In case the movie is not recorded, check if SD card is not inserted into the main body

The movie may not be recorded since small impact can not be detected according to sensitivity of the acceleration sensor.

The recorded movies may not identify the license plate of the preceding car according to distance lighting or car speed.

If you place bright object or lighting object inside the front glass of the car, it may be reflected on the glass especially at night and make identification difficult.

In case movie quality is not good: Check if the lens of the main body is contaminated and clean it with glass gauze, cloth, etc.

When the movie contains too much sky or ground, adjust the camera up/down/left/right .

If the main body is not powered on, check if the cigar jack of the main body has been properly connected.

Appendix6Warranty Policy & Warranty card Guaranty certificate assures quality of the purchased product and will be required to receive guaranty serviceWithin the guaranteed period(1 year since purchasing). If you have any guaranty certificate without customerRegistration, type in your name and address into the following column of the guaranty certificate and show the seller or authorized distributor. * Since the customer center may ask you to present the serial No. or Guaranty Certificate in order to confirm that you have the right to use the product, please keep the Guaranty Certificate of this product carefully. The S/W and firmware may be changed without prior notice to the users because of performance improvement, etc.

Product upgrade should be conducted by the user personally. If you want to receive the update through visiting service, please use the customer center of the product manufacturer or seller.

Product NameSECUROADModel NameIBX-1500KSerial NumberWarranty Period1 year since PurchasingPurchasing Date D M YDistributorTelAddressSeller

**********************************