1 Title: Wind Power Plant Condition Monitoring Author(s ... · Author(s): Costinas Sorina; Diaconescu Ioana; Fagarasanu Ioana Editor(s): Perlovsky L; Dionysiou DD; Zadeh LA; et al

1 Title: Wind Power Plant Condition Monitoring

Author(s): Costinas Sorina; Diaconescu Ioana; Fagarasanu Ioana

Editor(s): Perlovsky L; Dionysiou DD; Zadeh LA; et al.

Conference: 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education/3rd WSEAS RES 2009/3rd WSEAS WWAI 2009 Location:

Tenerife, SPAIN Date: JUL 01-03, 2009

Sponsor(s): WSEAS

Source: ENERGY PROBLEMS AND ENVIRONMENTAL ENGINEERING Book Series: Energy and Environmental Engineering Series Pages: 71-76 Published: 2009

Times Cited: 0 (from All Databases)

http://apps.webofknowledge.com/full_record.do?product=UA&search_mode=GeneralSearch&qid=6&SID=3ECB2BcCj3NjGEN2dGK&page=1&doc=2

2 Title: Energy Efficiency for Heat Engine Implementation into Systems of Cogeneration

Author(s): Patrascu Roxana; Diaconescu Ioana

Editor(s): Perlovsky L; Dionysiou DD; Zadeh LA; et al.

Conference: 3rd WSEAS International Conference on Energy Planning, Energy Saving, Environmental Education/3rd WSEAS RES 2009/3rd WSEAS WWAI 2009 Location:

Tenerife, SPAIN Date: JUL 01-03, 2009

Sponsor(s): WSEAS

Source: ENERGY PROBLEMS AND ENVIRONMENTAL ENGINEERING Book Series: Energy and Environmental Engineering Series Pages: 77-83 Published: 2009



3 Title: Optimization of Coordinate Measuring Machine using Steppers

Author(s): Stanciu Septimiu Valerian; Curtu Ioan; Stanciu Mariana Domnica; et al.

Editor(s): Sohrab SH; Catrakis HJ; Kobasko N

Conference: 5th IASME/WSEAS International Conference on Continuum Mechanics/7th WSEAS International Conference on Fluid Mechanics/7th WSEAS International

Conference on Heat and Mass Transfer Location: Univ Cambridge, Cambridge, ENGLAND Date: FEB 23-25, 2010

Source: CONTINUUM MECHANICS, FLUIDS, HEAT Book Series: WSEAS Mechanical Engineering Series Pages: 141-146 Published: 2010


http://apps.webofknowledge.com/full_record.do?product=UA&search_mode=GeneralSearch&qid=153&SID=2Fo6G6kM@lKPEEhb23J&page=1&doc=4

4. Title: ON DYNAMICS STOCHASTIC EVALUATION OF EMBEDDED SYSTEMS PROTECTION AGAINST VIBRATION

Author(s): Nastac Silviu; Debeleac Carmen; Curtu Ioan; et al.

Editor(s): Katalinic B

Conference: 20th International Danube-Adria-Association-for-Automation-and-Manufacturing Symposium Location: Vienna, AUSTRIA Date: NOV 25-28, 2009

Sponsor(s): Danube Adria Assoc Automat & Mfg Int Vienna; Vienna Univ Technol; Univ Appl Sci Technikum Vienna; Austrian Soc Engineers & Architects

Source: ANNALS OF DAAAM FOR 2009 & PROCEEDINGS OF THE 20TH INTERNATIONAL DAAAM SYMPOSIUM Book Series: Annals of DAAAM and Proceedings Volume: 20

Pages: 1619-1620 Published: 2009



5. Title: ANALYSIS OF WORKING PERFORMANCES AT DAMAGED VIBRATION ISOLATION DEVICES

Author(s): Nastac Silviu

Editor(s): Katalinc B

Conference: 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing Location: Trnava, SLOVAKIA Date: OCT 22-25, 2008

Source: ANNALS OF DAAAM FOR 2008 & PROCEEDINGS OF THE 19TH INTERNATIONAL DAAAM SYMPOSIUM Book Series: Annals of DAAAM and Proceedings Pages: 949-

950 Published: 2008



6 Title: THE STRUCTURAL ANALYSES OF CLASSICAL GUITAR BODY THROUGH EXPERIMENTAL METHODS

Author(s): Curtu Iaon; Stanciu Mariana Domnica; Nastac Silviu; et al.

Editor(s): Katalinic B

Conference: 20th International Danube-Adria-Association-for-Automation-and-Manufacturing Symposium Location: Vienna, AUSTRIA Date: NOV 25-28, 2009

Sponsor(s): Danube Adria Assoc Automat & Mfg Int Vienna; Vienna Univ Technol; Univ Appl Sci Technikum Vienna; Austrian Soc Engineers & Architects

Source: ANNALS OF DAAAM FOR 2009 & PROCEEDINGS OF THE 20TH INTERNATIONAL DAAAM SYMPOSIUM Book Series: Annals of DAAAM and Proceedings Volume: 20




7 Title: SOME POSSIBILITIES FOR STERN-TUBE BUSHES INNER SURFACES MACHINING WITH DIMENSIONAL ADAPTIVE CONTROL

Author(s): Vasiliu Lucian; Epureanu Alexandru; Frumusanu Gabriel

Editor(s): Nedelcu D; Slatineanu L; Mazuru S; et al.

Conference: 14th International Conference on Modern Technologies, Quality and Innovation (ModTech 2010) Location: Slanic-Moldova, ROMANIA Date: MAY 20-22, 2010

Sponsor(s): TCM, Dept Machine Mfg Technol; ModTech, Iasi; TCM, Dept Chisinau; Serbian Acad Sci Arts, Inst Tech Sci; Redesign; Toyota Iasi; Shell; MOL; URB; MO Serv Syst

Source: MODTECH 2010: NEW FACE OF TMCR, PROCEEDINGS Book Series: Proceedings of the International Conference ModTech Pages: 663-666 Published: 2010



8. Title: Influence of Surface Effect On Nickel Micro Deep Drawing Process

Author(s): Keller C.; Afteni M.; Banu M.; et al.

Editor(s): Barlat F; Moon YH; Lee MG

Conference: 10th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 2010) Location: Pohang, SOUTH KOREA Date: JUN 13-17, 2010

Sponsor(s): Korean Soc Technol Plastic; POSTECH, Grad Inst ferrous Technol; Pusan Natl Univ, ERC Net Shape & Die Mfg; Korea Inst Ind Technol; Korea Inst Mat Sci;

POSCO; POSTECH, World Class Univ Progrem, GIFT

Source: NUMIFORM 2010, VOLS 1 AND 2: DEDICATED TO PROFESSOR O. C. ZIENKIEWICZ (1921-2009) Book Series: AIP Conference Proceedings Volume: 1252 Pages: 1025-

1030 DOI: 10.1063/1.3457495 Published: 2010



9. Title: Experimental research regarding the evolution of some parameters of the superficial layer in low cycle fatigue process

Author(s): Macuta S.; Rusu E.

Editor(s): Soares CG; Kolev PN

Conference: 12th International Cogress of the International-Maritime-Association-of-the-Mediterranean Location: Varna, BULGARIA Date: SEP 02-06, 2007

Sponsor(s): Int Maritime Assoc Mediterranean

Source: MARITIME INDUSTRY, OCEAN ENGINEERING AND COASTAL RESOURCES, VOLS 1 AND 2 Book Series: Proceedings and Monographs in Engineering, Water and

Earth Sciences Volume: 1-2 Pages: 219-223 Published: 2008

Times Cited: 0 (from Web of Science)

http://apps.webofknowledge.com/full_record.do?product=WOS&search_mode=GeneralSearch&qid=30&SID=2Fo6G6kM@lKPEEhb23J&page=1&doc=3

10

Title: Fabrication, testing and analysis of steel/composite DLS adhesive joints Author(s): Hashim S.; Nisar J.; Tsouvalis N.; et al. Editor(s): GuedesSoares C; Das PK Conference: 2nd International Conference on Marine Structures Location: Lisbon, PORTUGAL Date: MAR 16-18, 2009 Source: ANALYSIS AND DESIGN OF MARINE STRUCTURES Book Series: MARSTRUCT Book Series Pages: 379-385 Published: 2009 Times Cited: 0 (from Web of Science)


11 Title: A new method of real-time physical simulation of prime movers used in energy conversion chains

Author(s): Munteanu Iulian; Bratcu Antoneta Iuliana; Andreica Maria; et al.

Source: SIMULATION MODELLING PRACTICE AND THEORY Volume: 18 Issue: 9 Pages: 1342-1354 DOI: 10.1016/j.simpat.2010.05.007 Published: OCT 2010



12 Title: DEBATE SOFTWARE TOOLS USED AS PEDAGOGICAL RESOURCES

Author(s): Beldiman Liviu; Ifrim Vasile; Jascanu Nicolae; et al.

Editor(s): Popescu V; Jugureanu R; Stefan V; et al.

Conference: 6th International Scientific Conference on eLearning and Software for Education Location: Bucharest, ROMANIA Date: APR 15-16, 2010

Sponsor(s): Siveco; Adv Distributed Learning; Altfactor; ComputerLand; AVITECH; Expert Trade Co; Adv Technol Syst

Source: ADVANCED DISTRIBUTED LEARNING IN EDUCATION AND TRAINING TRANSFORMATION Pages: 55-62 Published: 2010



13 Title: AN INNOVATIVE APPROACH TO EDUCATION-DEBATE SOFTWARE TOOLS

Author(s): Beldiman Liviu; Jascanu Veronica; Ifrim Vasile; et al.

Editor(s): Rusu C

Conference: 6th International Seminar on the Quality Management in Higher Education Location: Tulcea, ROMANIA Date: JUL 08-09, 2010

Sponsor(s): Minist Educ Res Youth & Sports; Dimitrie Cantemir Univ; Sif Moldova; SC Leineweber Ro SRL; SC Doipitici SRL

Source: QUALITY MANAGEMENT IN HIGHER EDUCATION, VOL 2 Pages: 353-356 Published: 2010



14 Title: Development of multi-output neural networks for data integration - A case study

Author(s): Trundle Paul; Neagu Daniel; Craciun Marian; et al.

Editor(s): Corchado E; Corchado JM; Abraham A

Conference: 2nd International Workshop on Hybrid Artificial Intelligence Systems Location: Univ Salamanca, Salamanca, SPAIN Date: NOV , 2007

Source: INNOVATIONS IN HYBRID INTELLIGENT SYSTEMS Book Series: ADVANCES IN SOFT COMPUTING Volume: 44 Pages: 80-87 Published: 2007



15 Title: Toward an Interdisplinary Virtual Laboratory

Author(s): Murariu Liliana; Murariu Gabriel

Editor(s): Angelopoulos A; Fildisis T

Conference: 7th International Conference of the Balkan-Physical-Union Location: Alexandroupolis, GREECE Date: SEP 09-13, 2009

Sponsor(s): Balkan Phys Union; Hellen Phys Soc; Univ Crete; Univ Athens; Univ Ioannina; Univ Petras; Univ Thessaloniki; TEAK; Prefecture Evros; Reg Adm Eastern

Macedonia & Thrace

Source: 7TH INTERNATIONAL CONFERENCE OF THE BALKAN PHYSICAL UNION VOLS 1 AND 2 Book Series: AIP Conference Proceedings Volume: 1203 Pages: 1394-1397

Published: 2009



16 Title: Peculiarities of Black & White Welded Joints of Thin Sheets

Author(s): Iordachescu Danut; Iordachescu Mihaela; Scutelnicu Elena; et al.

Editor(s): Lepadatescu D; Mastorakis NE

Conference: 1st International Conference on Manufacturing Engineering, Quality and Production Systems Location: Transilvania Univ Brasov, Brasov, ROMANIA Date: SEP 24-

26, 2009

Source: ADVANCES IN MANUFACTURING ENGINEERING, QUALITY AND PRODUCTION SYSTEMS, VOL I Book Series: Mathematics and Computers in Science and Engineering




17 Title: SEVERAL PROPERTIES OF A FRICTION STIR PROCESSED LAYER OF ALUMINIUM

Author(s): Iordachescu Mihaela; Iordachescu Danut; Scutelnicu Elena




644 Published: 2008



18 Title: QUALITY OF THE VOCATIONAL TRAINING FOR CONSTRUCTION INSPECTORS

Author(s): Iordachescu M.; Iordachescu G.; Scutelnicu E.; et al.

Editor(s): Rusu C

Conference: 5th International Seminar on Quality Management in Higher Education Location: Tulcea, ROMANIA Date: JUN 12-14, 2008

Sponsor(s): Tech Univ Iasi

Source: QUALITY MANAGEMENT IN HIGHER EDUCATION, PROCEEDINGS Pages: 529-534 Published: 2008



19 Title: NEEDS FOR LLL IMPROVEMENT FOR SUPPORTING CAREER COUNSELLING FOR SELF-EMPLOYMENT

Author(s): Iordachescu M.; Iordachescu G.; Scutelnicu E.; et al.

Editor(s): Rusu C

Conference: 5th International Seminar on Quality Management in Higher Education Location: Tulcea, ROMANIA Date: JUN 12-14, 2008

Sponsor(s): Tech Univ Iasi

Source: QUALITY MANAGEMENT IN HIGHER EDUCATION, PROCEEDINGS Pages: 623-628 Published: 2008



20 Title: Level Determination of Space Orientation Depending on Manual Laterality and Using Artificial Intelligence Techniques

Author(s): Badau Dana; Badau Adela; Paraschiv Florin; et al.

Editor(s): Zadeh LA; Kacprzyk J; Mastorakis N; et al.

Conference: 9th WSEAS International Conference on Artificial Intelligence, Knowledge Engineering and Data Bases Location: Univ Cambridge, Cambridge, ENGLAND Date:

FEB 20-22, 2010

Sponsor(s): WSEAS

Source: PROCEEDINGS OF THE 9TH WSEAS INTERNATIONAL CONFERENCE ON ARTIFICIAL INTELLIGENCE, KNOWLEDGE ENGINEERING AND DATA BASES Book Series:

Artificial Intelligence Series-WSEAS Pages: 108-113 Published: 2010



21 Title: Due to inadequate life-style and lack of physical activity the prevalence and severity of obesity in Romanian schoolchildren is increasing

Author(s): Sabin A. O.; Ion-Ene M.; Cioroiu S. G.

Source: DIABETES OBESITY & METABOLISM Volume: 12 Supplement: 1 Pages: 66-66 Published: OCT 2010



22 Title: EUTHANASIA IN THE ROMANIAN PENAL LAW

Author(s): Perju-Dumbrava Dan; Morar Silviu; Fulga Iuliu; et al.

Source: REVISTA ROMANA DE BIOETICA Volume: 6 Issue: 2 Pages: 14-22 Published: APR-JUN 2008



23 Title: BETWEEN DO'S AND DON'TS IN THE CATCHING-UP PROCESS - LESSONS FOR ROMANIA FROM THE EU-15 COHESION COUNTRIES

Author(s): Profiroiu Marius; Ionescu Victor-Romeo; Constantin Daniela-Luminita; et al.

Source: TRANSYLVANIAN REVIEW OF ADMINISTRATIVE SCIENCES Issue: 26E Pages: 139-155 Published: JUN 2009



24 Title: Design improvement of an automotive-formed suspension component subjected to fretting fatigue

Author(s): Buciumeanu M.; Miranda A. S.; Pinho A. C. M.; et al.

Source: ENGINEERING FAILURE ANALYSIS Volume: 14 Issue: 5 Pages: 810-821 DOI: 10.1016/j.engfailanal.2006.11.023 Published: JUL 2007



http://apps.webofknowledge.com/CitingArticles.do?product=WOS&SID=2Fo6G6kM@lKPEEhb23J&search_mode=CitingArticles&parentProduct=WOS&parentQid=137&parentDoc=6&REFID=74804225

25 Title: Influence of Wear Properties on Fretting Fatigue Life of a CK45 Alloy and the AI7175 Alloy

Author(s): Buciumeanu M.; Miranda A. S.; Silva F. S.

Editor(s): Marques AT; Silva AF; Baptista APM; et al.

Conference: 13th Conference of the Sociedade-Portuguesa-de-Materiais/4th International Materials Symposium Location: Oporto, PORTUGAL Date: APR 01-04, 2007

Source: ADVANCED MATERIALS FORUM IV Book Series: MATERIALS SCIENCE FORUM Volume: 587-588 Pages: 971-975 Published: 2008




26 Title: Centrifugal casting features/metallurgical characterization of aluminum alloys

Author(s): Chirita G.; Stefanescu I.; Soares D.; et al.

Editor(s): Paulino GH; Pindera MJ; Dodds RH; et al.

Conference: 9th International Conference on Multiscale and Functionally Graded Materials Location: Oahu, HI Date: OCT 15-18, 2006

Sponsor(s): Univ Illinois, Urbana Champaign; Univ Virginia; Fed Univ Rio de Janeiro

Source: MULTISCALE AND FUNCTIONALLY GRADED MATERIALS Book Series: AIP CONFERENCE PROCEEDINGS Volume: 973 Pages: 598-603 Published: 2008



27 Title: Advantages of the centrifugal casting technique for the production of structural components with Al-Si alloys

Author(s): Chirita G.; Soares D.; Silva F. S.

Source: MATERIALS & DESIGN Volume: 29 Issue: 1 Pages: 20-27 DOI: 10.1016/j.matdes.2006.12.011 Published: 2008




28 Title: Constitutive behaviour analysis for a boatbuilding ferro-cement with "super mortar"

Author(s): Hreniuc V.; Kumbetlian G.; Modiga M.








29 Title: Noise reductnoise reduction in case of mobile machinery cabins

Author(s): Polidor Bratu

Editor(s): Bilek M; Mrazek J; Smolkova M; et al.

Conference: 10th International Conference on the Theory of Machines and Mechanisms Location: Liberec, CZECH REPUBLIC Date: SEP 02-04, 2008

Sponsor(s): Tech Univ Liberec, Dept Textile Machine Design

Source: X. INTERNATIONAL CONFERENCE ON THE THEORY OF MACHINES AND MECHANISMS, PROCEEDINGS Pages: 93-96 Published: 2008



30 Title: Experimental Evaluation of the Antivibrating Damping Capacity in Case of Elastomers used for Tram Railway Supporting

Author(s): Bratu Polidor

Source: MATERIALE PLASTICE Volume: 46 Issue: 2 Pages: 198-200 Published: JUN 2009



31 Title: Toward emotional e-commerce: The customer agent

Author(s): Jascanu Nicolae; Jascanu Veronica; Bumbaru Severin

Editor(s): Lovrek I

Conference: 12th International Conference on Knowledge-Based Intelligent Information and Engineering Systems Location: Zagreb, CROATIA Date: SEP 03-05, 2008

Sponsor(s): KES Int, Innovat Knowledge Based & Intelligent Engn Syst; Univ Zagreb, Fac Elect Engn & Comp; Republic Croatia, Minist Sci, Educ & Sports; Ericsson Nikola

Tesla; Croatian Natl Tourist Board; Zagreb Tourist Board

Source: KNOWLEDGE - BASED INTELLIGENT INFORMATION AND ENGINEERING SYSTEMS, PT 1, PROCEEDINGS Book Series: LECTURE NOTES IN ARTIFICIAL

INTELLIGENCE Volume: 5177 Pages: 202-209 Published: 2008




32 Title: Macro- and microelements abundance in some urban soils from Romania

Author(s): Lacatusu Radu; Lacatusu Anca-Rovena; Lungu Mihaela; et al.

Source: CARPATHIAN JOURNAL OF EARTH AND ENVIRONMENTAL SCIENCES Volume: 3 Issue: 1 Pages: 75-83 Published: 2008




33 Title: FEA OF ALUMINIUM FSW: TEMPERATURE FIELD AND STRESSES

Author(s): Visan Daniel; Birsan Dan; Mircea Octavian; et al.




1484 Published: 2008



34 Title: A COMPARATIVE STUDY OF TEMPERATURE FIELDS IN X52 STEEL BUTT WELDS

Author(s): Mircea Octavian; Visan Daniel; Banea Mariana; et al.




878 Published: 2008



35 Title: Due to inadequate life-style and lack of physical activity the prevalence and severity of obesity in Romanian schoolchildren is increasing

Author(s): Sabin A. O.; Ion-Ene M.; Cioroiu S. G.

Source: DIABETES OBESITY & METABOLISM Volume: 12 Supplement: 1 Pages: 66-66 Published: OCT 2010



36 Title: Rheological Model of the Neoprene Elements used for Base Isolation Against Seismic Actions

Author(s): Bratu Polidor

Source: MATERIALE PLASTICE Volume: 46 Issue: 3 Pages: 288-294 Published: SEP 2009


37 Title: Corrosion behavior of Ni/Al(2)O(3) and Ni/ZrO(2) nanocomposite thin films

Author(s): Gheorghies C.; Stasi I. V.; Lalau C. C.

Source: JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS Volume: 11 Issue: 2 Pages: 146-154 Published: FEB 2009




38 Title: Influence of vibration on the solidification behaviour and tensile properties of an Al-18 wt%Si alloy

Author(s): Chirita G.; Stefanescu I.; Soares D.; et al.

Source: MATERIALS & DESIGN Volume: 30 Issue: 5 Pages: 1575-1580 DOI: 10.1016/j.matdes.2008.07.045 Published: MAY 2009




39 Title: INFLUENCE OF SUBSTRATE POLARISATION VOLTAGE ON THE PROPERTIES OF TiN FILMS DEPOSITED ON STEEL BASE

Author(s): Vlad Maria; Mihai Gaita; Moraru Luminita

Source: METALURGIA INTERNATIONAL Volume: 14 Issue: 3 Pages: 8-12 Published: 2009



40 Title: Theoretical Model of Steel Continuous Casting Technology

Author(s): Gheorghies C.; Crudu I.; Teletin C.; et al.

Source: JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL Volume: 16 Issue: 1 Pages: 12-16 Published: JAN 2009




41 Title: Stress analysis in pipe system of cargo transfer tankers installations

Author(s): Murineanu A.; Modiga A.; Dimache A.








42 Title: STRUCTURAL ANALYSIS FOR A PANAMAX BULK CARRIER

Author(s): Pacuraru-Popoiu Sandita; Lancu Paulina; Crudu Liviu I.

Book Group Author(s): ASME

Conference: 27th International Conference on Offshore Mechanics and Arctic Engineering Location: Estoril, PORTUGAL Date: JUN 15-20, 2008

Sponsor(s): ASME, Ocean, Offshore, & Arct Engn Div

Source: OMAE 2008: PROCEEDINGS OF THE 27TH INTERNATIONAL CONFERENCE ON OFFSHORE MECHANICS AND ARCTIC ENGINEERING - 2008, VOL 2 Pages: 719-724

Published: 2008



43 Title: MACRO AND MICROSTRUCTURAL CHANGES IN NAVAL STEEL UNDER FATIGUE CORROSION

Author(s): Baicean Svetlana; Palaghian Liviu; Potecasu Florentina; et al.

Source: METALURGIA INTERNATIONAL Volume: 15 Issue: 10 Pages: 30-37 Published: 2009


Documents

1 Title: Wind Power Plant Condition Monitoring Author(s ... · Author(s): Costinas Sorina; Diaconescu Ioana; Fagarasanu Ioana Editor(s): Perlovsky L; Dionysiou DD; Zadeh LA; et al