Upload
barrie-mcgee
View
233
Download
0
Embed Size (px)
Citation preview
1www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
Milling is a metal cutting operation in which the work is progressively moved towards a rotating cutter for material removal process.
Milling cutter is a multipoint cutting tool.
2www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
3www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
www.bookspar.com | Website for Students | VTU NOTES | QUESTION PAPERS 4
A milling machine is a power operated machine tool in which the work piece is mounted on moving table is machined to various shapes when moved under a slow revolving cutter.
Work piece is fed against a milling cutter.
5www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
Metal is removed in the form of chips by using a rotating multiple teeth milling cutter.
Milling process is used for producing flat, contoured or helical surfaces for toothed gears, slots, etc.
6www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
The workpiece is mounted on the table can be fed either in the direction opposite to that of rotating cutter or in the same direction of the cutter.
Classification Conventional or up milling. Climb or down milling.
7www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
www.bookspar.com | Website for Students | VTU NOTES | QUESTION PAPERS 8
Work piece advances against the rotating cutter.
Chips are progressively thicker.
www.bookspar.com | Website for Students | VTU NOTES | QUESTION PAPERS 9
Work piece is fed in the same direction as that of the cutter tooth.
Cutter enters top of the work piece and removes the chip that gets progressively thinner.
10www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
Work piece is fed in opposite direction of that of cutter.
Chips are progressively thicker.
Strong clamping is required since the cutting force is directed upwards and tends to lift the work piece.
Poor surface finish and used for hard materials.
Work piece is fed in same direction of that of cutter.
Chips are progressively thinner.
Strong clamping is not required since the cutting force is directed downwards and keeps work piece pressed to table.
Good surface finish and used for soft materials.
Down milling
Milling machine can be broadly classified into :
1. Plain or horizontal type of milling machine
2. Vertical milling machine
3. Universal milling machine
4. Planer type milling machine
5. Profile cutting milling machine
11www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
Base ColumnArborKneeSaddleTable Over arm
12www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
YOKE
Base – it is a hollow cast iron structure which forms the foundation of machine on which other parts are mounted.
Column – houses main drive, transmission system, spindle. It is provided with vertical guide square or dovetail to accommodate knee.
Knee – mounted on vertical guide of column moved up or down by an elevating screw.
13www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
14www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
YOKE
Saddle – mounted on knee which slides on it by operating cross feed handle.
Table – mounted on top of saddle with a dovetail fit. Table slides perpendicular to the axis of saddle movement.
Arbor – shaft which carries the cutter with its other end supported by yoke.
15www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
16www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
YOKE
Over arm – mounted on top of column. Supports the free end of arbor through yoke.
WorkingWork piece is mounted directly on table using machine vice.
Cutter of required shape and size are mounted over the arbor which is driven by spindle.
17www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
Feed in all 3 axis can be given by using knee elevating handle, cross slide handle, table movement handle.
18www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
19www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
YOKE
www.bookspar.com | Website for Students | VTU NOTES | QUESTION PAPERS 20
Base and column
Spindle head
Base and column – base is the foundation for the machine and column is the vertical part houses motor, transmission system.
Spindle head – mounted on front face of the column at the top. It has a vertical spindle run by motor to which milling tool is fitted to end.
21www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
Working Work piece is mounted on table and cutter is mounted on vertical spindle.
Feed is given by movement of saddle and table and also vertical movement of tool.
22www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
Plain millingEnd millingSlot millingAngular millingForm millingStraddle millingGang milling
23www.bookspar.com | Website for Students
| VTU NOTES | QUESTION PAPERS
www.bookspar.com | Website for Students | VTU NOTES | QUESTION PAPERS 24
Process used to mill flat surfaces of the work piece.
Milling cutter axis is parallel to the surface that is being milled.
www.bookspar.com | Website for Students | VTU NOTES | QUESTION PAPERS 25
Process of milling that is used to mill slots, pockets and keyways.
Axis of milling cutter is perpendicular to the surface of the work piece.
www.bookspar.com | Website for Students | VTU NOTES | QUESTION PAPERS 26
Cutter tool – “slot drill”
Axis of spindle is horizontal or parallel to surface of work.
To produce rectangular slots, T-slots, dovetail slots.
www.bookspar.com | Website for Students | VTU NOTES | QUESTION PAPERS 27
To produce angular surfaces like dovetail, grooves and chamfers.
Surface of slot is neither parallel nor perpendicular to the milling cutter axis.
www.bookspar.com | Website for Students | VTU NOTES | QUESTION PAPERS 28
This is a process used to machine special forms / contours consisting of curves.
“form milling cutter” is the cutting tool which is shaped exactly to the contour to be milled.
www.bookspar.com | Website for Students | VTU NOTES | QUESTION PAPERS 29
www.bookspar.com | Website for Students | VTU NOTES | QUESTION PAPERS 30
Used to machine two parallel vertical surfaces at a single time.
It has two cutters mounted parallel on the arbor separated by a calculated spacing.
Also used to mill sides of hexagon.
www.bookspar.com | Website for Students | VTU NOTES | QUESTION PAPERS 31
Gang milling is the term applied to an operation in which two or more milling cutters are used together on one arbor when cutting horizontal surfaces.
www.bookspar.com | Website for Students | VTU NOTES | QUESTION PAPERS 32
www.bookspar.com | Website for Students | VTU NOTES | QUESTION PAPERS 33
Clamping area – area of the work table where the jobs are to be clamped.
Longitudinal movement (mm) – this is the distance along the X – axis by which the table along with the job moves longitudinally.
www.bookspar.com | Website for Students | VTU NOTES | QUESTION PAPERS 34
Transverse movement (mm) – distance along Y-axis by which the table travels in traverse direction.
Speed – speed of the spindle rotation ( rpm)
Power of milling spindle motor – power capacity of motor of spindle. (kW)
www.bookspar.com | Website for Students | VTU NOTES | QUESTION PAPERS 35