10 - Cabinet Joint · PDF fileC 201 7 10.1 Interior Storage 10 Custom Dovetail Drawer Boxes • Conestoga’s Drawer Box program offers multiple wood specie selections and custom options

Custom Products | Summer 2017 10.1

Interior Storage

10Custom Dovetail Drawer Boxes

• Conestoga’s Drawer Box program offers multiple wood specie selections and custom options. Information about dovetail drawer boxes and related options are found on the following pages.

• Dovetail drawer boxes are fully assembled; Hard Maple, Soft Maple and Walnut can be ordered unfinished or finished; Natural Birch and Birch plywood drawer boxes are only available finished. See finishing information contained in this section.

• Natural Birch, Birch plywood, Hard Maple, Soft Maple and Walnut drawer box options and accessories have a 7 day standard lead-time, and a 2 day code red expedite lead-time; add 2 days for finishing. All other published specie drawer box species, add 5 additional days.

Custom Dovetail Drawer Box Specifications

The following species are available for the 5/8" Custom Dovetail Drawer Box program:

• Hard Maple and Soft Maple boxes are constructed with Maple veneer (wood composite core) bottom.

• Natural Birch solid and plywood boxes are constructed with Natural Birch veneer face and sound back plywood bottom.

• Walnut boxes are constructed with Walnut 1/4" veneer bottom only. 3/8" bottoms not available.

• Two finishing options are available on custom drawer boxes. Standard finish on all program species is a durable, low emission UV topcoat. Hand sprayed, catalyzed conversion varnish is available at an additional upcharge on Hard Maple, Soft Maple and Walnut drawer boxes. Both finish options have a 15° sheen topcoat. See Additional Options and Pricing chart.

• Natural Birch drawer boxes are also available with unsanded/unfinished dovetails as a cost savings. Sides, backs and bottoms have a clear UV finish. Option not available on Hard Maple, Soft Maple or Walnut.

• Plywood dovetail boxes are constructed from 5/8" Natural Birch plywood with .5mm Birch edgeband on the top edges and 1/4" Birch plywood bottoms. Drawer sides, fronts, backs and bottoms are finished with a durable UV topcoat. Dovetail joints are unsanded, unfinished and unputtied. Available options include undermount notching, Blum TANDEM clip installation and logo burn.

Prici

Dovetail Drawer Box Size Parameters

Description Minimum Maximum Increments

Height 2" 12" 1/2"

Width 3" 46" 1/16"

Depth 3" 31" 1/16"

Custom Products | Summer 201710.2

Inte

rior

Stor

age

10

Additional Options and Pricing

Bottom Thickness

1/4" Standard See drawer box height charts for pricing3/8" Requires 1/8" to be added to the drawer box height

No Bottom Optional No Upcharge

Bottom Reveal

1/2" Standard No Upcharge

3/8" Optional

Finishing Options (clear topcoat only, per box)

Standard UV finish

100 lineal inches or fewer per box

Greater than 100 lineal inches per box

Hand spray finish (pricing per box in addition to standard finishing charges)

Logo Burn

Private label logo burn

Top Edge Profiles (unfinished dovetail option not available)

Drawer box bottom

Reveal DetailReveal: 1/2" or 3/8"

*Natural Birch 3/8" drawer box bottoms utilize Maple veneer with composite core.

Dovetail Drawer Box Pricing

Drawer Box Height, 3/8" Bottom1/8" added to accommodate 3/8" bottoms

Specie 2-1/8" – 3-1/8" 3-5/8" – 4-1/8" 4-5/8" – 6-1/8" 6-5/8" – 8-1/8" 8-5/8" – 10-1/8" 10-5/8" – 12-1/8"

Natural Birch*

Maple, Hard

Maple, Soft

Standard eased edge1/16" RadiusNo upcharge

Eased edge front and backbull-nosed sides

Bull-nosed full radius edgefour sides

Machine edgefour sides

1/8" Routed edgeAll except outside front edge

Offset sidesSides 1/8" lower than

front and back

*Contact your Customer Service Representative for tooling requirements and costs.

Drawer Box Height, 1/4" Bottom

Specie 2" – 3" 3-1/2" – 4" 4-1/2" – 6" 6-1/2" – 8" 8-1/2" – 10" 10-1/2" – 12"

Natural Birch, unfinished dovetails

Natural Birch

Maple, Hard

Maple, Soft

Birch Plywood

Walnut


Interior Storage

10

Undermount Notching Options

• Undermount notching only.

• Undermount notching with hook hole boring (detail shown below).

• 2-1/2" wide undermount notching only.

• 2-1/2" wide undermount notching with hook hole boring (detail shown below).

• 5" wide undermount notching with hook hole boring (included standard).

• Minimum drawer box widths:

® Standard notch: 6".

® 2-1/2" and 5" notch: 11-1/4".

Cut-Down Sides

• Available for 3" or 4" high drawer boxes only.

• Add 1/8" to box height dimensions when ordering 3/8" bottoms.

• Rear box height 2".

• Unfinished dovetails not available.

Bread Box Top Routing

• Designed for 1/8" or 1/4" thick lids.

• 9/32" deep groove on sides only.

• 1/8" rout is 5/32" wide.

• 1/4" rout is 9/32" wide.

• Minimum box height 4".

• Lid not included.

Dovetail Drawer Box Options

Reveal Depth

1/2" or 3/8"

Back

Drawer Box Bottom

Undermount w/hook hole boring

1/4" dia. x 3/8" Deep

1/4" dia. x 3/8" Deep

1/4" dia. x 3/8" Deep

29/32"

7/16"

1-3/8"

2-1/2" wide notch w/hook hole boring

2-1/2"

7/16"

29/32"5" wide notch

w/hook hole boring

5"

7/16"

29/32"

Hand Pull

• Minimum box width is 8".

• Hand pull is 5-1/4" wide and 11/16" deep, centered on front of drawer box.


Back

Front

Eased Edges1/16" Radius

Eased Edges 1/16" Radius

Front

3" or 4"2"


Inte

rior

Stor

age

10

Keyboard Tray Optionnt Only

• Minimum box width 12".

• Minimum box height 2".

• Maximum box height 3-1/8".


Dovetail Drawer Box Options (continued)


Blum TANDEM Clip Options00 Installed TANDEM Clips

• Pre-drilling and installation options are for Blum TANDEM drawer hardware.

• Pre-drilled pilot holes are drilled at the proper angle and spacing to accept TANDEM clips.

• Minimum box width 5-1/2".

• 1/2" reveal only.

• Undermount notching with hook hole boring are not standard and must be specified.

• Blum TANDEM Clips feature side-to-side, height and depth adjustment for fine tuning drawer front alignment. Loose clips not available.

Blum TANDEM Clips Pre-drilled Blum TANDEM Clips Installed


Front and BackFront Only

Blum part number T51.1901


Interior Storage

10Dovetail Drawer Box Options (continued)

1/2"

1/4"

Roll Out Drawer Front Option •Drawerboxfrontis1"widerthanthe

overallorderedboxwidth.

•Minimumboxwidthis8".

Visible Storage Unit Routing •Minimumboxwidthis12".

•Minimumboxheightis7".

•Maximumboxwidthis24".

•Removabledividerincluded.Located1-1/2"behindfrontofdrawerbox.

1"

1"

Back Recessed Option • Minimumdrawerboxwidthis12".

• MustspecifyA,BandCdimensions.

•Recesscanbecenteredoroff-setfromeitherside.

•MinimumdimensionforAandBis4".MinimumdimensionforCis3-5/8".

A B

C


Inte

rior S

tora

ge

10Custom Drawer Accessories

17-1/2"–32"

3/8"

3"

3-1/8"

3/8"

7-1/2"–13"

3"

3-1/8"

3/8"

14"–25-1/4"

3"

3-1/8"

3"

10-1/2"–19"

3/8"

3-1/8"

Cutlery Dividers•AvailableinNaturalBirchandHardMaple.

•Allcutlerydividerdesignsareconstructedwitha1/4"bottomunless“NoBottom”isspecified.

•WhenorderingspecifydesignA,B,C,D,E,F,GorH.

•Specifydepthandwidthin1/16"increments.Bothdimensionsaremeasuredfromoutsideedgetooutsideedge.

•Depthforalldesignsmustbebetween16"to22".Refertospecificdesignforwidthrange.

•Whenorderedwithadrawerbox,cutlerydividersaresized1-5/16"lessthantheexteriorwidthanddepthoftheoveralldrawerboxsize.

•Toorderacustomsizecutlerydivider,specifythedepth,widthanddesignasaseparatelineitemontheorderform.

•Standardheightis3-1/8".Heightmodificationsavailable;seefollowingpagesforoptionsandpricing.

Design A Design B

Design DDesign C

Custom Products | Winter 2016 10.7

Interior Storage

10Custom Drawer Accessories (continued)

3/8"

14"–25-1/4"

3-1/8"

3/8"

17-1/2"–32"

3-1/8"

1-5/8"

Front

Sliding Cutlery Divider

•

® Available with all divider configurations; specify design when ordering.

® Top divider is 1-3/8" high mounted on a 1/4" base.

® Recommended maximum drawer box width is 24" to ensure proper operation.

3/8"

7-1/2"–13"

3-1/8"

10-1/2"–19"

3/8"

3-1/8"

Design HDesign G

Design E Design F

No Bottom Option

• No upcharge.

® All cutlery divider designs are constructed with a 1/4" bottom unless “NO BOTTOM” is specified.

® Maximum height of cutlery dividers with no bottom is 2-7/8".

Reduced Height Option

•

® All divider designs can be reduced in height for specialty applications.

® Specify divider height when ordering.

® Minimum divider height with bottom is 1-5/8".

® Minimum divider height without bottom is 1-3/8".

Custom Products | Winter 201610.8

Inte

rior

Stor

age

10

Fineline Cutlery Dividers

• Unique, tapered divider design affords sturdy compartment divisions with pleasing minimal profile.

• Available in Natural Birch or Walnut with a clear finish.

• Base plate is designed to be trimmed to fit the interior dimensions of a specific drawer box.

• Each unit includes a trimmable depth extender for a truly custom fit and maximum storage.

• Optional knife block can be incorporated into cutlery units for maximum utensil storage.

• Knife block measures 5-7/16" wide x 16-11/16" deep and accommodates 5 pieces of cutlery.

• Cut-to-size option

® All Fineline dividers can be cut to fit inside a drawer box. Specify interior dimensions of drawer box.

® Dividers will be packaged independently of the drawer box.

Custom Drawer Accessories (continued)

Part No. Description

556.87.601 Fineline Cutlery Insert – Walnut – 15-9/16" wide




556.87.901 Fineline Cutlery Insert – Birch – 15-9/16" wide





556.91.640 Fineline Knife Block – Walnut – 5-7/16" wide x 16-11/16" long

556.91.940 Fineline Knife Block – Birch – 5-7/16" wide x 16-11/16" long

Custom Products | Winter 2016 10.9

Interior Storage

10Custom Drawer Accessories (continued)

ORGA-LINE Drawer Dividers for Tandem Drawers

• ORGA-LINE drawer inserts are designed to provide reconfigurable drawer storage and organization solutions.

• Designed to fit 21" deep (24" deep cabinets) wooden 563 Series Tandem sized drawers. Drawer organizers are spring loaded to ensure they stay secure within the drawer.

• Four unique designs incorporate stainless steel and nylon trays and dividers.

• All ORGA-LINE accessories carry Blum’s lifetime warranty.

• Minimum exterior drawer box width is 12-7/16".

• Minimum drawer box height is 4".

• Five adjustable/removable trays: 3-7/16"W x 10-1/2"D x 2-3/8"H.

• Trays and dividers are dishwasher safe up to 170 .̊



• In addition to five adjustable/removable 10-1/2" trays, a spring loaded lateral divider is included.


• Minimum exterior drawer box width is 13-1/8"

• Minimum drawer box height is 4"

• Unit includes one 10-1/4" tray, two 7" trays, two 3-7/16" trays and multiple lateral dividers. All trays and dividers are adjustable and removable.




• Adjustable/reconfigurable horizontal and vertical divider components.

11-3/16"

15"

11-7/8"

11-9/16"


2100812 ORGA-LINE Design A


2100813 ORGA-LINE Design B


2100814 ORGA-LINE Design C


2100815 ORGA-LINE Design D

Custom Products | Winter 201610.10

Inte

rior

Stor

age

10

Knife Block Insert

• Can be sized to fit a specific drawer box or ordered separately. If ordering separately, specify width and depth.

• Knife block and handle rest are unfinished Hard Maple mounted on a prefinished 1/4" bottom.

• Spacing is 1-1/4" between slots.

• Minimum insert: 7-1/2" wide x 16" deep.

• Maximum insert: 21" wide x 22" deep.


Spice Tray Insert

• Can be sized to fit a specific drawer box or ordered separately. If ordering separately, specify width and depth.

• 3/4" diameter finger hole centered on lead rail for ease of removal from a drawer box.

• Spice rests are 5-1/4" wide, 1-1/2" high, mounted on a prefinished 1/4" bottom.

• Minimum insert: 7-1/2" wide x 17" deep.

• Maximum insert: 32" wide x 22" deep.

Spice Tray Insert Width

Specie 7-1/2" – 15" 15-1/16" – 23" 23-1/16" – 32"

Natural Birch

Maple, Hard


Interior Storage

10

Fineline Plate Organization Sets•Plateorganizationsetsaredesignedtobeinstalled

indeepdrawerboxesforstackeddishwarestorage.

•Baseplatescanbeeasilytrimmedtosizetofittheinteriordimensionsofaspecificdrawerbox.

• AvailableinNaturalBirchorWalnutwithaclearfinish.

•Perforatedbaseplateshaveadjustmentholesin32mmintervalsandare3/8"thickcoveredwithBirchorWalnutveneer.

•Roundsupportpostsare6-15/16"highandaresolidBirchorWalnutwithaclearfinish.Postsmountedtobaseplatewithathreadedinsertsecuredwithafasteningnut.

•Postsaredesignedtoaccommodatedifferentshapesandsizesofdishware.

•Setincludes1baseplate,12postsand4bumpers.

•OptionalFinelineslottedplateracksalsoavailable.

•Verticalslottedplateracksforsmallerplatesandbowlsalsoincludeathreadedinsertsecuredwithafasteningnut.

• Cut-to-size option® Plateorganizationbaseplatescanbecuttofitinsideadrawerbox.Specifyinteriordimensionsofdrawerbox.

® Cut-to-sizekits(baseplateandposts)willbepackagedindependentlyofthedrawerbox.


557.47.701 PegboardBasePlateSet–Walnut–34"widex22"deep

557.47.801 PegboardBasePlateSet–Birch–34"widex22"deep

556.87.650 FinelinePlateRack–Walnut–4-3/4"highx18-13/16"wide

556.87.950 FinelinePlateRack–Birch–4-3/4"highx18-13/16"wide


Includes12posts

Includes2slottedracks


Inte

rior S

tora

ge

10

1-13/16"

Cabinet Side

•Adjustablepull-outtrayhardwaresystemsfeatureunfinishedSoftMaplecomponentsand75lb.capacityballbearingfullextensiondrawerslides.Drawerboxesnotincluded.

•Kitsareavailableforbase(24"deep),vanity(21"deep)ortallutility(21"and24"deep)cabinetryapplications.Baseandvanitykitsincludehardwarefor2fullwidthpull-outs.Tallkitsincludehardwarefor4fullwidthpull-outs.

•Twocleatwidths“A”or“B”(horizontaldrawerslidesupports)areavailabletoaccommodateoverlayorinsetandframedorframelesscabinetconstruction.

•Verticalcornercleatscanbetrimmedinheighttoaccommodateadjustableshelves.

•4daystandardlead-time,2daycoderedexpeditelead-time.

System cleat width “A”ForframelessandoverlayapplicationsBase/Tall:3/4"x1-5/16"x21-15/16"Vanity:3/4"x1-5/16"x18-15/16"

Base/Vanity Corner Cleats4pieces3/4"x1"x19-1/4"(sixpositions)

Tall Corner Cleats 4pieces3/4"x1"x51-3/4"(16positions)

Adjustable Pull-Out Tray System Kits

System cleat width “B”ForframedandinsetapplicationsBase/Tall:3/4"x2-1/16"x21-15/16"Vanity:3/4"x2-1/16"x18-15/16"

2-9/16"

Cabinet Side

System Kits - Cleat Width “A” System Kits - Cleat Width “B”Kit Number Description Kit Number Description

SYSB24-AA Base24"(3/4"x1-5/16"x21-15/16") SYSB24-BA Base24"(3/4"x2-1/16"x21-15/16")

SYSTB24-AA Tall24"(3/4"x1-5/16"x21-15/16") SYSTB24-BA Tall24"(3/4"x2-1/16"x21-15/16")

SYSV21-AA Vanity21"(3/4"x1-5/16"x18-15/16") SYSV21-BA Vanity21"(3/4"x2-1/16"x18-15/16")

SYSTV21-AA Tall21"(3/4"x1-5/16"x18-15/16") SYSTV21-BA Tall21"(3/4"x2-1/16"x18-15/16")

Single Shelf Kits - Cleat Width “A” Single Shelf Kits - Cleat Width “B”Kit Number Description Kit Number Description

SYSSB24-AA Base24"(3/4"x1-5/16"x21-15/16") SYSSB24-BA Base24"(3/4"x2-1/16"x21-15/16")

SYSSV21-AA Vanity21"(3/4"x1-5/16"x18-15/16") SYSSV21-BA Vanity21"(3/4"x2-1/16"x18-15/16")

Custom Products | Summer 2017 10.12A

Interior Storage

10

1-1/4" 2-1/2"

• Adjustable pull-out tray hardware systems feature clear prefinished Hard Maple components and patented drawer slide installation/adjustment brackets. Drawer slides not included.

• Installation/adjustment clips are designed for Tandem style undermount drawer slides.

• Pilasters and brackets use 5mm x 32mm spacing.

• Kits are available for base, vanity or tall utility cabinetry applications.

• Two cleat widths are available to accommodate overlay or inset and framed or frameless cabinet construction.

• Pilasters (vertical uprights) can be trimmed in width or height for installation in varied styles of cabinet construction and interior configurations.

• Drawer box width and depth dimensions are based on the requirements of the drawer hardware being used and must be ordered separately.

• 4 day standard lead-time, 2 day code red expedite lead-time.

X-Series Adjustable Pull-Out Tray System Kits

1/4" Pilaster Kits with Brackets

Kit Number Description Cabinet Application

2100160 (4) 20-7/8" pilasters (8) brackets Base with door and drawer

2100161 (4) 28" pilasters (8) brackets Base full height door

2100162 (4) 58-5/8" pilasters (20) brackets Tall Utility

2-1/2" Pilaster Kits with Brackets

Kit Number Description Cabinet Application

2100163 (4) 20-7/8" pilasters (8) brackets Base with door and drawer

2100164 (4) 28" pilasters (8) brackets Base full height door

2100159 (4) 58-5/8" pilasters (20) brackets Tall Utility

1-1/4" 2-1/2"

1-1/4" Pilaster kits with bracketsFor frameless and most framed overlay applications.

2-1/2" Pilaster kits with bracketsFor inset, wide framing and thick door applications.

Custom Products | Summer 201710.12B

Inte

rior

Stor

age

10

Circle Hand Pull

• Minimum box width is 5-3/4".

• Circle pull diameter is 1-1/2", placed 1" down from top edge and centered on the width of the front of the box.

• Front and back placement is optional and must be specified.

• Not available with unfinished dovetail option.

Custom Drawer Accessories

Ellipse Hand Pull

• Minimum box width is 9".

• Ellipse pull is 5”, placed 1” down from top edge and centered on the width of the front of the box.

• Front and back placement is optional and must be specified.

• Not available with unfinished dovetail option.

Finish Sample Chip Display Boxes

• Dovetailed drawer boxes with hand pulls and interior dividers accommodate Conestoga’s standard size sample finish chips (3/8" thick x 4-3/8" wide x 6-1/8" high). Custom box sizing is also available to accommodate custom dimensioned chips.

• Finish Sample Chip sets must be ordered separately.

• Matching specie wooden spacers are installed in the front and back of each display box to allow easy indexing of samples.

• 5" high boxes standard.

• Sizing for standard Conestoga 26 piece chip sets:

® Single set design: 5" high x 5-3/4" wide x 14" deep.

® Double set design: 5" high x 10-5/8" wide x 14" deep.

® Triple set design: 5" high x 15-1/2" wide x 14" deep.

To accommodate 32 piece chip sets, depth for all designs should be ordered 16-5/8" deep.

• Sample box price follows drawer box specie per lineal inch material charge, assembly and finishing charges plus the design charges.

• To order customized Finish Sample Chip Display Boxes, follow these min./max. size guidelines:

® Single set design: Min. width 5-3/4", Max. width 15", max. depth 21"

® Double set design: Min. width 10-5/8", Max. width 24", max. depth 21"

® Triple set design: Min. width 15-1/2", Max. width 31", max. depth 21"

Single Set Design Circle pull front/back standard

Double Set Design Ellipse pull front/back standard

Triple Set Design Ellipse pull front/back standard


Interior Storage

10Spice Storage Units

•Dovetailconstructionwith5/8"thicksidesandends.

•1/4"plywoodbackflushwithbackofunit.

•32mmlineboreshelfsupportsystem.

•5mmlockingshelfclips.

•Matchingspecieretainerrailattachedtounitbottomandeachadjustableshelf.

• Installationhardwareisnotincluded.Additionalhingesandadequateinstallationhardwarearerequiredtoensureproperoperation.

•Availablesizerange:

Height:18"to36"Width:8"to21"Depth:3-1/8"fixed

Todeterminethelistpriceofaninteriorstorageunit:

•Findthesizerangeoftheunitintheapplicablespecietable.Selectthepricebasedontheoverallwidthandheightoftheunit.

•Addfinishingchargesifapplicable.

Spice Storage UnitsUnit Height Shelves Per Unit

18"-23" 2

23-1/16"-31" 3

31-1/16"-36" 4

Spice Storage Unit Pricing

Unit Height

Natural Birch - Unit Width Hard Maple - Unit Width

8" – 13" 13-1/16" – 17" 17-1/16" – 21" 8" – 13" 13-1/16" – 17" 17-1/16" – 21"

21"–23"

23-1/16"–31"

31-1/16"–36"


Inte

rior S

tora

ge

10Can Storage Units

Loose shelvesSpice Storage Units Can Storage Units

•Specifyspiceorcanstyleandunitwidth.

•Finishingisincludedinprice.

•Dovetailconstructionwith5/8"thicksidesandends.

•1/4"plywoodbackflushwithbackofunit.

•32mmlineboreshelfsupportsystem.

•5mmlockingshelfclips.

•Matchingspecieretainerrailattachedtounitbottom,fixedcentershelfandeachadjustableshelf.

•Forstructuralintegrity,unitsover39"highhaveonefixedshelf,centered.

• Installationhardwareisnotincluded.Additionalhingesandadequateinstallationhardwarearerequiredtoensureproperoperation.

•Availablesizerange:

Height:21"to60"Width:8"to21"Depth:5"fixed

*Unitsover39"include1fixedshelf

Can Storage UnitsUnit Height Shelves Per Unit

21"-23" 2

23-1/16"–31" 3

31-1/16"–39" 4

39-1/16"–47"* 5

47-1/16"–55"* 6

55-1/16"–60"* 7

Can Storage Unit Pricing

Unit Height

Natural Birch - Unit Width Hard Maple - Unit Width

8" – 13" 13-1/16" – 17" 17-1/16" – 21" 8" – 13" 13-1/16" – 17" 17-1/16" – 21"

21"–23"

23-1/16"–31"

31-1/16"–39"

39-1/16"–47"

47-1/16"–55"

55-1/16"–60"


Interior Storage

10

Spice Rack•Designedtobeinstalledinframedorframeless

cabinetry.

• Includesallmountinghardwarerequiredforbackofdoorinstallation.

•AttractiveChampagnefinishcoordinateswellwithcabinetinteriorsandexteriorcolors.

•Requiresoneframeandmultiplebasketkits,basedontheopeningheight.

•Eachbasketkitcontainstwobaskets.

•BasketfloorsarecoveredwithaMaplepatterned,non-slipmattingtokeepstoreditemsinplace.

Wall Organizer Units •Designedtobeinstalledinside9"or12"widefull

heightdoorwallcabinets.

•Adjustabledoormounthardwareincluded.

•Organizerunitsarefullyassembledandpackagedwithinstallationinstructions.

•Unitsincludeadjustableshelveswithchromerailsandfull-extensionballbearingdrawerglides.

•PrefinishedinNaturalBirchonly;unfinishedunitsarenotavailable.

•Frontdoorpanelsarenotincludedandmustbeorderedseparately.

Cabinet Accessories

Part No. Size

(W x H x D)Fits

CabinetRev•A•Shelf Reference

2100778 5"x26-1/4"x10-3/4" 9"wide 448-WC-5C

2100779 8"x26-1/4"x10-3/4" 12"wide 448-WC-8C


543.34.830 Frame–Champagne–10"widex23-1/2"high

543.34.851 TrayMaple–Champagne–3"highx9-7/8"wide

543.34.852 TrayMaple–Champagne–5"highx9-7/8"wide


Inte

rior S

tora

ge

10

Pull-out Storage Unit PricingPart No. Description

2100750A 3"BasePull-OutStorageUnit

2100751A 6"BasePull-OutStorageUnit

2100752A 3"WallPull-OutStorageUnit-30"high






•Pull-outstorageunitsaredesignedfor3"or6"spacesbetweencabinetsandcanbeaccessedfrombothsides.

•Storageunitsarefullyassembledandpackagedwithinstallationinstructions.

•Wallandbasestorageunitsincludeadjustableshelveswithchromerailsandfull-extensionball-bearingslides.

•PrefinishedNaturalBirchonly;unfinishedunitsarenotavailable.

•Frontdoorpanelsarenotincludedandmustbeorderedseparately.

Pull-Out Storage Units

Wall UnitsAvailablein30",36"and42"high.Allwallstorageunits11-1/8"deep.

Base UnitsAllbasestorageunits23"deepand30"high.

Pull-Out Storage Unit InstalledMountpull-outstorageunitstoadjacentcabinets.


Inte

rior

Stor

age

10Cabinet Accessories

Base Organizer Units

• Designed to be installed inside 9", 12" or 15" wide full height door base cabinets.

• Adjustable door mount hardware included.

• Organizer units are fully assembled and packaged with installation instructions.

• Units include adjustable shelves with chrome rails and full-extension ball bearing drawer glides.

• Prefinished in Natural Birch only; unfinished units are not available.

• Front door panels are not included and must be ordered separately.

Base Pull-Out Unit

• Designed to be installed in framed or frameless full height door base cabinets from 9" wide to 24" wide.

• Includes all cabinet and door mounting hardware.

• Attractive Champagne finish coordinates well with cabinet interiors and exterior colors.

• Works in both inset and overlay applications.

• Each pull-out requires one full extension frame and one shelf kit, based on the opening width.

• Each shelf kit contains two trays that can be installed at the desired height.

• Shelf surfaces are covered with a Maple patterned, non-slip matting to keep stored items in place.

• Full extension, soft close runners have an 80 lb. load capacity.


546.62.806 Full Extension Frame – Champagne – 3-3/4" wide x 21-3/8" deep

546.63.878 Base Pull-Out Maple – Champagne – 4" wide x 19-3/4" deep



546.63.812 Base Pull-out Maple – Champagne – 8" wide x 20-3/8" deep








Part No. Size (W x H x D)Fits


2100771 5" x 25-1/2" x 22-1/2" 9" wide 448-BC-5C

2100772 8" x 25-1/2" x 22-1/2" 12" wide 448-BC-8C

2100773 11" x 25-1/2" x 22-1/2" 15" wide 448-BC-11C


Interior Storage

10Cabinet Accessories (continued)

Ready to Install Base Pull-Out

• Base Pullout Unit ships preassembled and includes drawer hardware and floor mounted cleats for easy installation.

• Constructed from Natural Birch edgebanded plywood finished with a durable, clear UV topcoat.

• Unique top mount support bracket is rated at 225lb. capacity. Eliminates excessive side-to-side movement and sag when fully extended.

• Can be installed in both framed or frameless and overlay or inset cabinet applications.

• Drawer hardware is undermount, full extension with soft close feature.

• Integrated 6-way adjustable door mounting hardware allows for easy installation for all overlays and framing widths.


CabinetMin.

Opening

2100832 5-1/2" x 24" x 22" 9" base 6"

2100833 8-1/2" x 24" x 22" 12" base 9"

2100834 11-1/2" x 24" x 22" 15" base 12"

2100835 14-1/2" x 24" x 22" 18" base 18"

Ready to Install Bottom Mount Trash Can Pull Out

• Unit ships preassembled, including drawer hardware and floor mounted cleats for easy installation.

• Constructed from Natural Birch edgebanded plywood finished with a durable, clear UV topcoat.

• Integrated 6-way adjustable door mounting hardware allows for easy installation for all overlays and framing widths.

• Single and double units include one or two white polyethylene trash cans with 35 or 50 quart capacity.

• Single or double 50 quart units require full height base cabinets.

• Drawer hardware is undermount style full extension with soft close feature.

• Minimum opening requirement is 15", regardless of construction type.

Part No. Description/Dimensions

2100836 Single 35 quart can – 12-5/8"w x 21-3/8"d x 19-1/2"h

2100837 Double 35 quart cans – 15"w x 21-3/8"d x 19-1/2"h

2100838 Single 50 quart can – 12-5/8"w x 21-3/8"d x 23-3/4"h

2100839 Double 50 quart cans – 15"w x 21-3/8"d x 23-3/4"h


Inte

rior

Stor

age


Trash Can Pull-Out

• Available in Hard Maple and prefinished Natural Birch.

• 3/4" Hard Maple plywood top for Natural Birch and Hard Maple units.

• When ordering trash can pull-outs, specify the drawer box width. The top will extend 3/8" past the sides of the drawer box.

• Designed to be used with side mount full extension slides – hardware not included.

• Unit with single cut out includes one 7 gallon, almond color waste can; double cut out includes two waste cans; no cut out option does not include a waste can.

• Front height is 10" to accommodate door mounting hardware. Rear height is 3".

• Depth: 21-3/4" fixed.

Single cut out: Double cut out:

Minimum width: 11" Minimum width: 15"Maximum width: 21" Maximum width: 27"

Unit only, no cut out (solid top shipped loose):0

Minimum width: 11"Maximum width: 27"

Waste can only: Part #2100102A

Single cut out

Double cut out

Unit only, no cut out

Front

Custom Products | Summer 2017 10.18A

Interior Storage


TANDEM Trash Can Pull-Out

• Available in Natural Birch and Hard Maple.

• 3/4" Hard Maple plywood top for Natural Birch and Hard Maple units.

• Designed to be used with Blum TANDEM plus Blumotion full extension drawer slides and narrow drawer front locking clips (not included).

• Hardware reference numbers:

® Blum Tandem plus Blumotion: 563H5330B.

® Narrow drawer front locking clips: T51.0801.20 (L/R).

• Unit with single cut out includes one 7 gallon almond color waste can; double cut out includes two waste cans; no cut out option does not include a waste can.

• Cut outs also accommodate 13 gallon trash cans.

• Height: 6-3/4" fixed (including 3/4" plywood top).

• Depth: 21-3/4" fixed.

Single cut out: Double cut out:

Minimum width: 14-5/8" Minimum width: 20-5/8"Maximum width: 19-1/8" Maximum width: 28-1/8"

Unit only, no cut out (solid top shipped loose):

Minimum width: 14-5/8"Maximum width: 28-1/8"

Waste can only: Part #2100102A

Single cut out

Double cut out

Unit only, no cut out

Front


Inte

rior

Stor

age

10

Pet Insert

• Can be sized to fit a specific drawer box or ordered separately. If ordered separately, specify width and depth.

• Available in Natural Birch and Hard Maple.

• 3/4" thick Natural Birch plywood insert and divider.

• Insert accommodates 5", 6-1/2" and 7-3/8" diameter bowls (not included).

• Bowls are available at most pet stores.

• Not intended to accommodate water bowls.

• 2" high plywood divider is shipped loose. Plywood base plate is pre-drilled with pilot holes for divider installation.

• Available in drawer box depths between 18" to 21".

Single cut out: Double cut out: Natural Birch Natural Birch Hard Maple Hard Maple

Minimum width: 12-3/4" Minimum width: 15" Maximum width: 18" Maximum width: 36"

Cabinet Accessories (continued)

Polyethylene Pet Insert

• Durable insert is machined from 3/4" thick high density polyethylene material.

• Spills are mitigated with a 1/2" wide x 5/32" deep drip groove.

• Available in Black, Dolphin Grey, Seafoam (off white) and White. Specify color when ordering.

• Insert option size is determined by drawer box width and depth.

• Available in drawer box depths between 18" and 21".

• Insert rests inside drawer box on 5mm steel shelf pins. Box is drilled and pins are included.

• Insert accommodates 5", 6-1/2" and 7-3/8" diameter bowls (not included). Bowls available at most pet stores.

• Heavy duty full extension drawer slides are recommended (not included).

Single cut out: Double cut out:Minimum width: 12-3/4" Minimum width: 15"Maximum width: 18" Maximum width: 36"

Custom Products | Fall 2016 10.19

Interior Storage

10

Single Trash Can Unit

Minimum Opening Width: 12" Framed Cabinets 12-3/4" Frameless Cabinets

Minimum Opening Height: 19-1/4"

Minimum Interior Depth: 21-13/16"

Double Trash Can Unit

Minimum Opening Width: 14-3/4" Framed Cabinets 15-1/2" Frameless Cabinets

Minimum Opening Height: 19-1/4"

Minimum Interior Depth: 21-13/16"

Pull-Out Bottom Mount Trash Can Units

• Units are preassembled and include trash cans, installation instructions and hardware.

• Attaches to back of door with 6 way adjustability. Door hinging is not required.

• Platinum metal base and trash cans.

• Trash cans are 36 quart capacity.

• Bottom mount unit with full extension soft close slides.

• 110 lb. weight capacity.

• Single and double trash can units available.

Part No.

503.15.801

Part No.

503.15.802


Pull-Out Waste Recycling Center

• Designed to be installed in 27" wide base cabinets. Minimum cabinet opening width required is 24". Minimum cabinet opening height required is 21".

• Recycling center includes 4 removable 27 quart polymer containers.

• Floor mounted unit includes 80 lb. capacity undermount drawer glides with soft-close feature and installation hardware.

Part No. Size (W x H x D)

503.13.771 23-3/4" x 19" x 23-1/8"

Custom Products | Fall 201610.20

Inte

rior

Stor

age


LeMans II Corner Pull-Out Shelf

• Designed to be installed inside either full height or drawer/door blind corner base cabinets.

• Minimum door opening angle of 90 degrees required.

• Unit includes 2 trays and 2 posts.

• Shelves have Maple patterned non-slip surfaces with platinum colored metal rails.

• Shelf height is adjustable.

• Can easily be retrofitted into existing blind corner cabinetry.

• Maximum load per shelf is 65 lbs.

Corner Pull-Out Shelf

Part NumberShelf Size

Interior Width A

Interior Depth B

Opening width (Framed) C

Opening Width (Frameless) C Swing

541.32.445 15" 32-1/4" 21" 16-1/8" 17-1/8" Right

541.32.446 15" 32-1/4" 21" 16-1/8" 17-1/8" Left

541.32.450 18" 36-1/4" 21" 17-3/4" 18-3/4" Right

541.32.451 18" 36-1/4" 21" 17-3/4" 18-3/4" Left

541.32.460 21" 38" 21" 21-1/4" 22-1/4" Right

541.32.461 21" 38" 21" 21-1/4" 22-1/4" Left

Swings Left

C

B

A

C

A

B

Swings Right

Blind Corner System

• Swing-out pantry and roll out shelves maximize accessibility in blind corners.

• Units include drawer slides and installation instructions.

• Designed for blind cabinets with 15" wide or larger openings.

• Minimum frame opening height required is 19-3/4".

• Minimum cabinet interior depth is 22-5/8". Will not work with standard depth Cabinet Systems cabinetry or inset applications.

• Piano hinge on swing-out unit is reversible for left and right installation applications.

• 1/2" thick Maple with a clear finish; unfinished units not available.


2100790 Blind Corner System


Interior Storage




2100767 11-3/4"x18"x22" 15"wide 5CW2-1222-CR

2100768 20-3/4"x18-1/8"x22" 24"wide 5CW2-2122-CR

Two-tier Cookware Organizers•Unitsaredesignedtobeinstalledinside15"or24"

widebasecabinets.

•Twoindependentrackingsystemsaccommodatepots,pansandtheircorrespondinglids.

•Verticaldividersareindependentlyadjustable.

•Unitsmounttofloor,sideandbackofcabinets.

•100lb.capacityfullextensiondrawerglides.

• Installationhardwareincluded.

•Wireframeconstructionwithchromefinish.

Heavy Duty Mixer Lift•Sidemountedhardwarekitdesignedtobeinstalled

infullheightbasecabinets.

•Recommendedforusein18",21"or24"widefullheightdoorcabinets.

•Gascylinderassistmovesheavystandstylemixerseffortlessly.

•Champagnefinish.

•30lb.weightcapacityaccommodatesmoststandstylemixers.


•Shelfnotincluded.

Part No. Fits Cabinet

504.20.900 18",21"or24"(wide)


Inte

rior S

tora

ge


U-Shaped Tray Dividers•Floororshelfmountedunitsdesignedtobeinstalled

inmostwall,baseandtallcabinets.

•Soldindividually,eachunitprovides3"ofstoragespace;usemultipleunitsasnecessarytodivideandaccommodatecabinetinteriorspace.


•Wireframeconstructionwithchromefinish.

Part No. Size (W x H x D)Rev•A•Shelf Reference

2100765 3"x10"x11-7/8" 596-10CR-52

Tray Roll-Out•Designedtobeinstalledinside9",12"or15"wide

cabinets.

•Unitsarefullyassembledincludingdrawerslidesandinstallationinstructions.

•Mapleplywoodconstructionwithremovabledividers.

•Unitsare10"highand22-5/16"deepfixed.WillnotworkwithstandarddepthinsetCabinetSystemscabinetry.

•Doorrequiresspeciallowerhingeheightlocationtoclear3-1/4"highdrawerfront;6"frombottomofdoorisrecommendedwith1-1/2"framing.

•Doesnotworkwithconcealedinsethinges.

•PrefinishedinNaturalBirchonly;unfinishedunitsarenotavailable.


2100791 Roll-outfor9"basecabinet(5-3/4"wide)–1divider

2100792 Roll-outfor12"basecabinet(8-3/4"wide)–2dividers

2100793 Roll-outfor15"basecabinet(11-3/4"wide)–3dividers


Interior Storage

10

Sink Front Tip-Out Trays•Designedtoprovideconvenientstoragebehindsink

drawerfronts.

•Soldinpairs;canbeusedindividuallyforsmallerdrawerfrontsorintandemforwiderdrawerfronts.

•Traysarewhite,highimpactpolystyrene.Onetrayisopenandoneincludesanintegralsoapdishandringpost.

•Eachkitincludestwopairofspringloadedscissorstylehingesandinstallationhardware.

•Drawerfrontsarenotincluded.

Part No. Size (W x H x D)Rev•A•Shelf Reference

2100769 11"x3-13/16"x2-1/8" 6572-11-15-52

2100770 14"x3-13/16"x2-1/8" 6572-14-15-52

Part No. Size (W x H x D) Rev•A•Shelf Reference

2100775 13"x9-3/4"x19-1/4" RAS-SMFD-52

2100776 15-7/8"x9-3/4"x19-1/4" RAS-LGFD-52

File Drawer Support Systems• Insertunitdesignedtofitinsideofdeepdrawersto

accommodatehangingfoldersystems.

•Designedfor18"or21"widecabinets.Railsaretrimmableforadditionalcustomization.

•Smallfilesystemaccommodateslettersizehangingfolders.

•Largefilesystemaccommodateslegalsizehangingfolders.

•Wireframeconstructionwithblackfinish.

•Hangingfoldersarenotincluded.


Under-Sink Mat•Designedtocontainwaterorotherfluidstoprevent

damagetocabinet.

•Dimpledsurfacecancollect1gallonofliquidper6squarefeet.

•Canbeeasilycuttofitmostcabinetinteriors.

•Polystyrenesheetwithgrey/stainlessfinish.

Part No. Size

547.91.550 24-5/8"x45-1/2"


Inte

rior S

tora

ge


Lazy Susan Shelves•Woodsusansaredesignedtobeinstalledontoadjustableshelvesorcabinetfloors.Pricing

includessusanandmountingringbearingonly,cabinetshelvesnotincluded.

•Susansmountdirectlyonsurfaces-nocenterpoleisrequired.

•Allsusansareprefinishedwithacleartopcoat;unfinishedunitsarenotavailable.

Standard Wood Lazy Susan Shelves•1/2"thickHardMapleplywoodwitha

1-1/2"highlaminatededge.

•Soldindividuallyandincludesacentermountedringbearing.

Wire Rim Wood Susan Shelves•1/2"thickHardMapleplywoodwith1-1/2"highlaminated

edgeand2"highpowdercoatedwirerim.

• Interiorheightis3".

•Soldinpairsonly.


2100050A 32"KidneyWoodLazySusan

2100051A 32"FullRoundWoodLazySusan

2100052A 28"KidneyWoodLazySusan

2100053A 18"FullRoundWoodLazySusan


2100788A 32"KidneyWireRimLazySusanSet

2100786A 32"FullRoundWireRimLazySusanSet

2100787A 28"KidneyWireRimLazySusanSet

2100785A 28"FullRoundWireRimLazySusanSet


Interior Storage

10

Lattice Wine Racks

• Sold individually (specify two pieces if pair is desired).

• Trimmable in length and width.

• Standard rack bottle openings are 4" x 4".

• Square and Deluxe bottle openings are 4-1/4" x 4-1/4".

• Square and Deluxe wine racks can be used to make a pair.

• Available unfinished or finished. See Finishing Program section for pricing.


Lattice Wine Rack Pricing

Model Size

Unfinished Price

Cherry Hard Maple Red Oak

Standard 17" x 36"

24" x 30"

24" x 43"

Square 17" x 36"

24" x 30"

24" x 43"

Deluxe 17" x 36"

24" x 30"

24" x 43"

Standard Square

Deluxe

Squarecross section

11/16"

11/16"

Deluxecross section

Standardcross section

7/16"

3/4"

11/16"

11/16"


Inte

rior

Stor

age

10

• Sold in pairs.

• 30" or 36" width.

• Overall height 13-1/16".

• Thickness 3/4".

• Constructed with 7/16" same specie dowels, 2" on center.

• Removable center dowel for access and ease of cleaning.

• Available unfinished or finished. See the Finishing Program section for pricing.

Cross section of plate rack display top and bottom rail

Plate Rack Displays

Specie

Unfinished Price

30" 36"

Cherry

Hard Maple

Red Oak

• Use 1.25 sq. ft. to calculate 30" racks and 1.50 sq. ft. to calculate 36" racks.

• Sold in pairs (front and back).

• 3/4" thick only, 30" or 36" length.

• Front is 2" high, back is 3" high.

• Bottle cutouts start 3" from end on 30" and 3-1/2" from end on 36".

• 30" holds 5 bottles, 36" holds 6 bottles.

• Horizontal grain direction only.

• Available unfinished or finished. See Finishing Program section for pricing.

Half Round Wine Racks

Custom Products | Fall 2016 10.27

Interior Storage

10

Oval Wardrobe Tube and Accessories

• Unique oval design provides support for hanging clothes in closets and tall utility cabinets.

• Dimensions: 1-3/16" high x 9/16" wide x 48" long. Can be easily trimmed to length using a hacksaw.

• Wardrobe Tube Supports are required for wall to wall, between closet panels or inside cabinet installation applications.

• Surface Mount Center Supports are required on longer wardrobe tube spans or when using full length tubes.

• End Caps are used to cover cut exposed ends or when not using Wardrobe Tube Supports.

• Wardrobe Tube, Tube Supports, Oval Bracket Surface Mount and End Cap have a chrome finish.

Closet Accessory Program


801.13.244 2 Oval Wardrobe Tubes – Chrome – with 2 supports

802.04.208 Oval Bracket Surface Mount – Chrome – 1-13/16" high

802.05.295 End Cap – Chrome – 1-3/16" wide

Valet

• Designed to hold garments for dressing or to hang garment bags.

• Side mount installation to closet panels or cabinet interiors.

• Chrome finish.

• Dimensions: 1-1/16" wide X 1-7/8" x 14-1/4" long. Extension length is 9-9/16".


808.70.231 Valet – Chrome – 1-1/16" wide x 14-1/4 long

Oval Bracket Surface Mount

End Cap Tube Support

Custom Products | Fall 201610.28

Inte

rior

Stor

age

10

Belt Rack

• Designed to neatly hang belts and other fashion accessories such as scarves.


• Chrome finish.

• 6 storage hooks.

• Dimensions: 2-3/16" wide x 1-11/16" high x 14-1/8" long. Extension length is 10-9/16".

Tie Rack

• Designed to neatly hang ties, scarves other such fashion accessories.


• Chrome finish.

• 20 storage hooks.

• Dimensions: 2-3/16" wide x 1-11/16" high x 14-1/8" long. Extension length is 10-9/16".

Closet Accessory Program (continued)


807.54.231 Belt Rack – Chrome – 2-3/16" wide x 14-1/8" long


807.54.233 Tie Rack – Chrome – 2-3/16" wide x 14-1/8" long


Interior Storage

10

Shoe Fence•Designedtobeinstalledonhorizontalcloset

surfacesandinteriorshelves.

•Fencewidthcanbeeasilymodifiedbyremovingendpostandtrimmingwithahacksaw.

•Chromefinish.

•Fenceistwosidedwithbothsmoothandtexturedsurfaces.

•Dimensions:1-1/2"highxlengthsinchartbelow.

Closet Accessory Program (continued)


547.52.221 ShoeFence–Chrome–11"long





Rectangular Battery Operated Light•Rechargeablefixturewithmotionon/offfeature.

•Nopowercordaffordseasyinstallation.

•RechargesusingminiUSBcable,included.

•Lithiumbatterywith8LEDlights.

•Nickelcolorfinish.

Cabinet Interior Light Strip•Elongatedrechargeablefixturewithmotionon/off

feature.

•Designedtobeinstalledinsidecabinets,draweropeningsandclosets.

•Nopowercordaffordseasyinstallation.

•RechargesusingminiUSBcable,included.

•Lithiumbatterywith6LEDlights.

•Nickelcolorfinish.


833.87.013BatteryOperatedRectangularLightw/Sensor–

2-9/16"widex11/16"deepx4-3/4"long


833.87.011BatteryOperatedLightw/Sensor–

13/16"deepx11-13/16"long

Documents

10 - Cabinet Joint · PDF fileC 201 7 10.1 Interior Storage 10 Custom Dovetail Drawer Boxes • Conestoga’s Drawer Box program offers multiple wood specie selections and custom options