1000-915-000 Rev.A

SMARTLockTM Locking Screw Technology

CMF

SMARTLockS C R E W T E C H N O L O G Y

The SmartLock design features a unique Low Profile Cross-PinScrew Head. This screw head offers superior friction fit and axial guidance compared to other available screw heads.

• The only one-step locking screw with a locking capability up to 10˚ of angulation for the Mid-Face and Mandible locking plates.

• SMARTLock Locking Screws are manufactured with fine threads on the underside of the screw head, which upon insertion engage the circular “lip” within the hole.

• The SMARTLock Locking Screw Technology in mid-face and mandible applications not only provides a more stable plate-screw construct, but also decreases the possibility of infections or implant failure caused when screws loosen.

The Stryker Leibinger Universal Fixation System features newly designed full and half size aluminum containers and implant modules for your specific Cranio-Maxillofacial needs.

Universal Fixation System: Design Options

• The shorter plates used for limited LeFort I advancements are more malleable for ease of use.

• The longer plates used for extensive LeFort I advancements provide the increased level of rigidity required for stable fixation.

Providing thelevel of stability when and where

you need it.

The Stryker Leibinger Universal Fixation System represents the next generation of bone fixation for all Cranio-Maxillofacial fractures, orthognathic, and reconstructive needs. The Universal Fixation System includes these unique features and benefits:

• Implant modules designed for specific anatomical regions to enhance the ease-of-use.• Comprehensive implant selection in a flexible modular system.• SMARTLock screw technology applied throughout the entire system for optimal rigid fixation.• A system that allows for customizable options to fit each surgeon’s specific needs and techniques.• Ergonomically redesigned instrumentation for improved handling.

• These easy-to-contour Malleable Low Profile Plates are offered in both the Upper-Face and Mid-Face Fixation Modules.

• These plates are the ideal micro implant for the management of small bone fragments in non-load bearing regions of the skull.

• The malleable design enables the plates to be “bent on contact” in situ.

Universal Fixation System: Overview

10º 10º

• The new screw field design features a recessed screw hole that facilitates easy loading of the screw by guiding the tip of the screwdriver blade accurately into the head of the screw.

• In addition, recessed screw holes decrease the amount of screw spillage that can occur when loading.

• Customizable screw markers allow for maximum storage of popular screw sizes and designs.

New Technology & InnovationsThe Universal Fixation System is a redesign, not a repackaging of our implant systems.It represents the latest available technology for the internal fixation of all Cranio-Maxillofacial needs.The applied technology provides the surgeon with the innovations needed to achieve the appropriate level of fixation in each clinical setting.

1 . 7 m m G R A D U A T E D S T A B I L I T Y P L A T E S

The Stryker Leibinger Graduated Stability Plates offer the progressive level of fixation required as the LeFort I advancementincreases. This built-in progressive stability is a unique feature foroptimal Lefort I fixation.

L O W P R O F I L E P L A T E S

.60mm Standard

.50mm Malleable

Condensed Hole Spacing

Standard Hole Spacing

SMARTLoadS C R E W F I E L D

Half Size SterilizationContainer

Auxiliary ScrewModule available for1.2 & 1.7mm screws

ComprehensiveMesh Tray

Full Size SterilizationContainer

Comprehensive Implant Modules for specific anatomic

regions of the skull

Accessory Tray available for optional instruments,

drills & saws

Dedicated Instrument Tray with color coded instruments

and silicone strips ComprehensiveOrthognathic

Module

Which modules work best for you?

Optional Pre-bentLeFort I

Orthognathic Inlay

Unique Features:• Malleable Low Profile plates (Blue) for Micro applications,

Standard plates (Gold) for Micro Plus applications • SMARTLock Screw Technology applied to 1.2

self-drilling and self-tapping screws• Comprehensive implant options specifically designed

for the upper-face region• Universal screwdriver for 1.2mm and 1.7mm screws• Simplified instrumentation

Applications:Fracture Management

• Cranial vault fractures• Orbital fractures• Frontal sinus fractures• Naso-orbital-ethmoid fractures• Zygomatic complex fractures

Reconstruction of Defects and Deformities• Cranial vault region• Orbital region• Zygomatic region• Dento-alveolar region

UPPER-FACE MODULE

pp

Standard Plates (Gold)Profile height: .60mm

UPPER-FACE PLATES

Malleable Plates (Blue)Profile height: .50mm

Upper-Face: Inlay of Module

Burr Hole Covers Standard (Gold)Profile height: .60mm

3D Plates Malleable (Blue)Profile height: .50mm

Upper-Face: Bottom of Module

3D Plates Standard (Gold)Profile height: .60mm

Upper-Face Bottom of Module

Upper-Face Standard Inlay

The Stryker Leibinger Upper-Face Module is primarily used for the fixation of upper-face fractures and for the stabilization ofosteotomies and bone grafts required in reconstructive surgery.The Upper-Face Module has cross-over application for specific mid-face and dento-alveolar fixation needs.

Orbital Floor Plates Standard (Gold)Profile height: .40mm

Burr Hole Covers Malleable (Blue)Profile height: .50mm

1.2mm Screw Options

Self-TappingSelf-Drilling Self-TappingSelf-Drilling

For use in both Standard (Gold) or Malleable (Blue) plates Orbital Floor Plates Malleable (Blue)Profile height: .30mm

54-0300354-0300254-0400254-0300154-04001

55-0423555-04237

55-0623555-06237

Mid-Face M

odule

Unique Features:• Comprehensive selection of Malleable (Blue)

or Standard (Gold) implants• Mid-Face locking plates (Gray) that accommodate

all 1.7mm screws• SMARTLock Screw Technology applied to 1.7mm

self-drilling, self-tapping and locking screws• Universal screwdriver for all 1.7mm and 1.2mm screws• Simplified instrumentation

Applications:Fracture Management

• LeFort I fractures• Zygomatic complex fractures• Cranial vault fractures

Reconstruction of Defects and Deformities• Maxillary region• Zygomatic region• Cranial Vault region

MID-FACE MODULEMID-FACE PLATES

Mid-Face: Inlay of Module

Locking Plates (Gray)Profile height: .80mm

Mid-Face: Bottom of Module

Mid-Face Standard Inlay

Mid-Face Bottom of Module

The Stryker Leibinger Mid-Face Module is primarily usedfor the fixation of mid-face fractures and the stabilization ofosteotomies and bone grafts. This comprehensive modulefeatures new technologies that maximize flexibility andoverall ease-of-use.

Standard Plates (Gold)Profile height: .60mm

Malleable Plates (Blue)Profile height: .50mm

Self-TappingSelf-Drilling

55-0676055-0776055-04760

StandardG.S.P.Malleable

55-0676155-0776155-04761

55-0676255-0776255-04762

55-0676355-0776355-04763

55-0676455-0776455-04764

55-0676555-0776555-04765

55-0676655-0776655-04766

55-0676755-0776755-04767

1.7mm Screw Options

Self-TappingSelf-Drilling Self-TappingSelf-Drilling

Standard (Gold) plates

Locking Screw

Malleable (Blue) plates

Locking (Gray) plates

dac

eo

due

Optional Inventory

Orthognathic M

odule

ORTHOGNATHIC MODULEORTHOGNATHIC PLATES

Orthognathic: Basic Inlay

Orthognathic: Bottom of Module

Orthognathic: Pre-bent Lefort I Inlay

55-0676055-0776055-04760

StandardG.S.P.Malleable

55-0676155-0776155-04761

55-0676255-0776255-04762

55-0676355-0776355-04763

55-0676455-0776455-04764

55-0676555-0776555-04765

55-0676655-0776655-04766

55-0676755-0776755-04767

The Stryker Leibinger Orthognathic Module incorporatesenhanced technologies to create a comprehensive system.This system accommodates a wide-range of surgical techniques used for the management of dentofacial (jaw)deformities.

1.7mm Unique Features:• Three “L” plate designs: Standard, Malleable and GSP• Pre-bent LeFort I and Genioplasty Plates• Locking plates (Gray) that accommodate all 1.7mm screws• SMARTLock screw technology applied to 1.7mm, 2.0mm

and 2.3mm screws

1.7mm Applications:• LeFort I osteotomy fixation• Genioplasty (chin osteotomy)• Dento-alveolar/segmental osteotomies • Bone graft fixation

2.0/2.3mm Unique Features:• Sagittal split osteotomy plates• SMARTLock locking 2.0mm and 2.3mm

screws for sagittal split osteotomies• Dedicated orthognathic trocar system

and drill bits• Right-angle instrumentation

2.0/2.3mm Applications:• Sagittal split osteotomy fixation

Orthognathic Module

Screw Measuring Block

55-10704 55-10706 55-10708 55-10710 55-10712

55-07734 55-06734

Sagittal Split Plates

Ort

hogn

athi

c M

odu

le

60-16820 60-19820

2.0/2.3mm Fracture PlatesProfile height: 1.5mmOrder Qty: Package of 1

4 holes 4 holes with bar55-15504 55-15505

6 holes 6 holes with bar55-15506 55-15507

14 holes55-15514

4 hole C-Shaped 6 hole angle, 140˚55-15524 55-15536

6 hole angle, 115˚55-15526

2.0/2.3mm Compression PlatesProfile height: 1.5mmOrder Qty: Package of 1

4 holes, 2.0mm 6 holes, 2.0mm55-15570 55-15580

4 holes, 2.3mm 6 holes, 2.3mm55-15575 55-15585

2.0/2.3mm Mini PlatesProfile height: 1.0mmOrder Qty: Package of 1

4 Holes 4 holes 4 holes with bar55-10503 55-10504 55-10505

6 holes 6 holes55-10506 55-10507

16 holes55-10515

16 holes55-10516

2.0/2.3mm 3-D PlatesProfile height: 1.0mm Qty: Package of 1

3x2 holes 4x2 holes55-10532 55-10542

6x2 holes55-10562

Plates Not Actual Size Plates Not Actual Size

FRACTURE PLATES

Unique Features:• Low Profile Mini and 3D plates (Blue)• Fracture plates (Gold) have laser etchings across

top of the plate to aid in top/bottom orientation• All plates accommodate multiple screw diameters

and designs• Universal screwdriver for 2.0mm, 2.3mm and

2.7mm screws• 2.0mm and 2.3mm Compression plate options

(only to be used with neutral bone screws)• Simplified instrumentation

Applications:Mini and 3D Plates

• Tension band and/or Champy technique• Mandibular angle fractures• Subcondylar fractures

Fracture Plates• Fractures of all mandibular regions

Single screwdriver blade for all screws (2.0/2.3/2.7mm Emergency)

Rigid-Revolving Screwdriver handle

Mandible Fracture M

odule

MANDIBLE FRACTURE MODULE

H

F

H

Plate/Module Availability

Available only in Half-size module

Available only in Full-size module

F H

F

F H

F F H

F H

H

H

SMARTLock ScrewNeutral Bone Screw

Multiple diameter screw placement in all mandible plates.

2.0mm 2.3mm

F H F H

F

F F H

F H

F H F

F F H

Full Mandibular Fracture ModuleF

The Stryker Leibinger Universal Mandible Fracture Module is the most comprehensive system on the market.

2.0mm 2.3mm

H H

F

Half Mandibular Fracture ModuleH

H

Man

dibl

e Fr

actu

re M

odul

e

Plates Not Actual Size Plates Not Actual Size

RECON PLATES2.0/2.3mm Straight Primary Reconstruction PlatesProfile height: 1.5mm

11 holes55-15911

17 holes55-15917

2.0/2.3mm Hemi Primary Reconstruction Plates

2.0/2.3mm Straight Reconstruction PlatesProfile height: 2.8mm

11 holes55-28911

17 holes55-28917

2.0/2.3mm Hemi Reconstruction Plates

2.0/2.3mm Full Reconstruction Plates

Unique Features:

• Plates accommodate multiple screw diameters and designs

• Laser etchings across the top of the plate to aid in top/bottom orientation

• Universal screwdriver blade for 2.0mm, 2.3mm and 2.7mm screws

• Low profile precontoured plates minimize bending time

• Simplified instrumentation

Applications:Primary Reconstruction Plates

• Reconstruction with vascularized or non-vascularized bone graft(s)

• Repair of comminuted fractures*Not recommended for defect bridging without bone graft(s)

Applications:Reconstruction Plates

• Reconstruction with vascularized or non-vascularized bone graft(s)

• Defect bridging without bone graft(s)• Repair of comminuted fractures

Temporary Recon Screw Holder

Customized reconstruction module accommodates all mandibular

reconstruction needs Mandible R

econ M

odule

MANDIBLE RECON MODULE

6+13+6

55-28934

6+15+6

55-28932

6+17+6

55-28930

6+17

55-28920 Right

17+6

55-28922 Left

The Stryker Leibinger Mandible Recon Module incorporates cutting-edge technology that allows the surgeon complete control during mandibularreconstruction.

Precontoured Plates

5+17

55-15920 Right

17+5

55-15922 Left

Temporary condylar prosthesesare attached to the

Reconstruction Plate with fastening screws.

Condyles

Temporary Condylar Prostheses with plate pockets on back side.

56-25001 Left56-25002 Right

Medial View Lateral View

Man

dibl

e R

eco

n M

odu

le

The Stryker Leibinger DeltaSystem Resorbable Module provides a comprehensive alternative to titanium for cranio-maxillofacial fixation.

Unique Material:• The DeltaSystem tripolymer is a composition

of poly L-Lactide/D-Lactide/Glycolide having a molecular ratio of 85/5/10.The resulting tripolymer is an extraordinary combinationof strength, contourability and absorption well-suited for cranio-maxillofacial surgery.

DeltaSystem

Strength

Co

nto

urability A bsorpti

on

L - L A C T I D E

D-

LA

C

T I D E G L Y C

OL

ID

E

85

105

R E S O R B A B L E I M P L A N T T E C H N O L O G Y

DeltaSystem

OPTIONAL MODULES

Mes

h T

ray

Micro MeshMicro Mesh is an ultra-thin mesh used for defect bridging of the skull/skull base and orbital region, especially after tumor removal.

Unique Features:• Screws may be inserted directly through the mesh

without the need for a dedicated screw hole• Available in two ultra-thin sizes: .10mm (Blue)

and .20mm (Gold)• If fixation with bone screws is not possible or preferred

suture material may be used• A bi-directional measuring ruler is built into the tray

Applications:• Orbital floor• Lateral orbital wall• Sinus wall• Cranial defects

DynamicMesh/Micro Mesh TRAY

DynamicMeshDynamicMesh has optimal properties to facilitate unparalleled,three-dimensional contouring while maintaining adequate rigidity for bone defects of varied size and location. DynamicMesh can be shaped to fit most three-dimensional bone surfaces without unwanted wrinkled or overlapped areas.

Unique Features:• Standard (Gold - .60mm profile height) and Malleable

Low Profile (Blue - .30mm profile height) designs• Dedicated screw holes for many options in screw placement• Easy to cut and accurately contour to anatomical structures• Instrumentation for “in situ” cutting• A bi-directional measuring ruler is built into the tray

Applications:• Orbital wall trauma/reconstruction• Frontal sinus trauma/reconstruction• Cranioplasties and the reconstruction of skull defects

For use with a screw range of 1.0mm to 1.9mm

Malleable (.10mm profile height)54-00260 (120mm x 120mm)54-00261 (120mm x 60mm)54-00262 (60mm x 60mm)

For use with 1.2mm screws

Malleable (.30mm profile height) 54-00340 (40mm x 40mm)54-00342 (85mm x 85mm)54-00343 (120mm x 120mm)

Standard (.60mm profile height)54-00642 (90mm x 90mm)54-00643 (120mm x 120mm)54-00641 (200mm x 200mm)

For use with 1.7mm screws

Malleable (.30mm profile height)54-00344 (40mm x 40mm)54-00346 (90mm x 90mm)54-00345 (120mm x 120mm)

Standard (.60mm profile height)54-00646 (90mm x 90mm)54-00645 (120mm x 120mm)54-00647 (200mm x 200mm)

Standard (.20mm profile height)54-00270 (120mm x 120mm)54-00271 (120mm x 60mm)54-00272 (60mm x 60mm)

Unique Features:• Torque-limiting screwdrivers• Innovative screw head design• Simplified water bath system• Efficient screw delivery system

Applications:• Indicated for the fixation of the cranio-

orbital and midface fractures and for stabilization of osteotomies and bone grafts used in reconstructive surgery.

Auxiliary Screw ModuleThis customizable screw module is a simple and convenient way to store extra screws, drill bits and blades.

Unique Features:• Customizable screw markers• SMARTLoad screw field for easy loading

STORAGE OPTIONSInventory Management CartThis customizable cart is designed to help centralize and organize the additional support inventory to keep Stryker Leibingerimplant systems at the desired par levels.

Unique Features:• Customizable drawer dividers• Drawer and shelving options• Vertical cart design• Storage racks• Mobile

Procedural GuideContour & Application: Mid-Face Locking Plate

Contour & Application: Resorbable Plates

Step 1- Expose the fracture.

Step 2- Use benders tocontour Locking Plates.Benders include plate pockets with hole-pegs toreduce hole deformation.

Step 3- Cut plate with righthandle (R) in area labeled“CUT.” Slide the plate intothe cutting area. Cut will takeplace within the window.

Step 4- Insert drill guideinto drill guide handle anddrill hole. *Drill guides mustbe used when drilling holesintended to be used withlocking screws.

Step 5- Only insert firstscrew about 75% of the way,then drill the hole for thesecond screw and insert sec-ond screw 100% until lockedinto the plate. Finish the firstscrew then proceed accord-ingly with the other screws.

Step 6- Fracture fixation iscomplete.

Step 1- Expose the fractureand select the appropriatetemplate. Create the neces-sary contour on the template.

Step 2- Using the forceps,hold appropriate plate to tem-plate and submerge in sterilewater bath. After 15 seconds,remove and contour to thetemplate and let cool in roomtemperature. For additional “insitu” contouring, use contouringpens.

Step 3- Drill holes.

Step 4- Tap the hole usingthe bone tap. Be sure to setappropriate depth on thetap’s depth stop.

Step 5- Steps 3 and 4 areskipped by using a self-drillingtap. Set depth stop atappropriate depth and useself-drilling tap attached tothe tap handle. Make surethat the hole-depth is equalto (or longer) than thelength of screw to be used.

Step 6- Insert screws withthe torque-limiting feature inthe “ON” position on thescrewdriver handle.

Step 7- Fracture fixation iscomplete.

Contour & Application: Mandible Fracture Plate

Step 1- Expose fracture(s). Step 2- Use benders tocontour Fracture Plate.Benders include platepockets to reduce holedeformation.

Step 3- Cut FracturePlate with the right handle(R) in the area labeled"CUT.” Slide the platethrough the cutter fromleft to right. Cut will takeplace within the window.

Step 4- Insert the drillguide through trocar anddrill hole.

Step 5- Measure desiredscrew length using adepth gauge.

Step 6- Insert screw and repeat process foreach screw until fracturefixation is complete.

Complementary Products

IMF Screw SystemThe Intermaxillary Screw Fixation system offersadvantages over conventional arch bars for specificjaw fracture needs.The IMF screw system reducesoperative time and risk of disease transmission,requires minimal hardware and can easily be appliedin clinical settings.

TOM Bone MillTessier Osseous MicrotomeManually operated microtome that processes up to40cc’s of bone at a time into bone chips. Three differentcutting cylinders are available depending on the size ofbone chips needed.

Applications

• Immobilization of edentulous fractures• Reduction and immobilization of

displaced and nondisplaced maxillary and mandibular fractures

Applications

• Mandible reconstruction• Maxillary reconstruction• Sinus lift procedures• Dento-alveolar defect reconstruction• Frontal sinus obliteration

Medical ModelingCT-Based Anatomical Bone Models facilitate pre-surgical planning in complex clinical settings.These accurate 3D models can reduce OR time through enhanced preoperative planning.These medical models allow the pre-bending of platesand precise depth measurement for screws.

ApplicationsUseful in the planning of:• Distraction osteogenesis• Orthognathic surgery• Skull base tumor access• Mandibular and cranial vault

reconstruction

Colorado NeedleThe Colorado Microdissection Needle has a patentedultra-sharp tip for clean, precise soft tissue dissection.The heat resistant tungsten alloy maintains tip sharpnessand is highly polished for easy cleaning. We offer a wide selection of needles for use in standard handpieces (1/16”, 3/32”).

Applications

• Precise cutting and coagulation during electrosurgery

BoneSource® ClassicAs a pure hydroxyapatite cement, BoneSource®

Classic is an osteoconductive, isothermic biomaterialthat is easily sculptable and remains stable over time.

Applications

• Repair of craniotomy burr holes• Repair of contiguous craniotomy cuts• Repair of cranial defects

Procedural GuideContour & Application: Primary Reconstruction Plate

Contour & Application: Reconstruction Plate

Step 1- Expose defect andselect appropriate template.Recommended screw placementfor each segment includes:Neutral Bone Screws• 4ea- 2.0mm• 4ea- 2.3mm SMARTLock Screws• 3ea- 2.0mm• 3ea- 2.3mm

Step 2- Cut PrimaryReconstruction Plate with theright handle (R) in the arealabeled "CUT.” Slide theplate through the cutter fromleft to right. Cut will takeplace within the window.

Step 3- Contour PrimaryReconstruction Plate tomatch template using benders. Benders includeplate pockets to reduce holedeformation.

Step 4- Insert drill guidethrough trocar and drillhole.

Step 5- Measure desiredscrew length using adepth gauge.

Step 6- Once plate is inplace, remove screws andplate. After mandibularresection, replace “pre-bent” plate and screws.Recommend using temporary recon screw holder.

Step 1- Expose defect andselect appropriate template.Recommended screw placementfor each segment:Neutral Bone Screws• 4ea- 2.3mmSMARTLock Screws• 3ea- 2.3mm2.0mm screws are recommended for bone graft fixation only

Step 2a- To cut, lock plate in lefthandle (L) labeled "CUT.” Placecutting mechanism in right handle(R) flush alongside the plate recessin the left handle. Slide (R) handleup until plate is seated within locking mechanism.Step 2b- Once plate is fully seat-ed in the cutting mechanism, rotatecounterclockwise to shear plate.

Step 3a- Contour Recon-struction Plate to match template using benders.Benders include plate pocketsto reduce the amount of holedeformation.Step 3b- Roller benders can be used for out-of-planebending.

Step 4- Insert drillguide through trocarand drill hole.

Step 5- Measuredesired screw lengthusing a depth gauge.

Step 6- Once plate is inplace, remove screws andplate. After mandibularresection, replace “pre-bent” plate and screws.Recommend using temporary recon screw holder.

Universal System Ordering InformationProduct # Description Product # Description

Upper-FaceUpper-Face Fixation Plates, Standard Inlay55-04424 24 Hole Straight Plate, malleable condensed 55-04218 18 Hole Straight Plate, malleable 55-04231 2x2 Hole 3-D Plate, malleable 55-04233 6x2 Hole 3-D Plate, malleable 55-04240 7 Hole Double Y Plate, malleable 55-04250 10 Hole Curved Plate, malleable 55-06224 24 Hole Straight Plate55-06254 4 Hole Orbital Plate55-06250 10 Hole Curved Plate55-06260 8 Hole L Plate 90˚ Left55-06261 8 Hole L Plate 90˚ Right55-06270 7 Hole T Plate55-06240 7 Hole Double Y Plate55-06231 2x2 Hole 3-D Plate55-06233 6x2 Hole 3-D Plate

Upper-Face Fixation Plates, Bottom Module55-06235 6x6 Hole 3-D Plate55-06237 10x10 Hole 3-D plate55-04235 6x6 Hole 3-D Plate, malleable55-04237 10x10 Hole 3-D plate, malleable54-03003 Orbital Floor Plate Isolated Small, 0.3mm54-03002 Orbital Floor Plate Basic Middle, 0.3mm54-04002 Orbital Floor Plate Basic Middle, 0.4mm54-03000 Template Combined, Orbital Floor Plate, Small/Middle54-03001 Orbital Floor Plate Complex Large, 0.3mm54-04001 Orbital Floor Plate Complex Large, 0.4mm54-04000 Template, Orbital Floor Plate, Large55-06376 1.2 Malleable Burr Hole Cover Plate, 7mm55-06374 1.2 Malleable Burr Hole Cover Plate, 10mm55-06373 1.2 Malleable Burr Hole Cover Plate, 14mm55-06371 1.2 Malleable Burr Hole Cover Plate, 20mm55-06375 1.2 Burr Hole Cover Plate, 7mm55-06372 1.2 Burr Hole Cover Plate, 10mm55-06370 1.2 Burr Hole Cover Plate, 14mm

1.2mm Cross-Pin Self-Tapping Screws (5 screws per package)51-12003 1.2x3mm Self-Tapping Screw51-12004 1.2x4mm Self-Tapping Screw51-12005 1.2x5mm Self-Tapping Screw51-12006 1.2x6mm Self-Tapping Screw51-12007 1.2x7mm Self-Tapping Screw51-12008 1.2x8mm Self-Tapping Screw51-12010 1.2x10mm Self-Tapping Screw51-12012 1.2x12mm Self-Tapping Screw

1.2mm Cross-Pin Self-Drilling Screws (5 screws per package)51-12903 1.2x3mm Self-Drilling Screw

1.4mm Emergency Self-Tapping Screws (5 screws per package)51-14003 1.4x3mm Emergency Screw51-14005 1.4x5mm Emergency Screw51-14007 1.4x7mm Emergency Screw51-14009 1.4x9mm Emergency Screw

Upper-Face Drill Bits (Single use only)60-09504 0.9mm Twist Drill, 4mm WL, Stryker End60-10506 1.0mm Twist Drill, 6mm WL, Stryker End60-10512 1.0mm Twist Drill, 12mm WL, Stryker End

DynamicMesh/Micro MeshDynamicMesh 54-00340 1.0/1.2 DynamicMesh, Malleable, 40x40x.3mm54-00342 1.0/1.2 DynamicMesh, Malleable, 85x85x.3mm54-00343 1.0/1.2 DynamicMesh, Malleable, 120x120x.3mm54-00642 1.0/1.2 DynamicMesh, Standard, 90x90x.6mm54-00643 1.0/1.2 DynamicMesh, Standard, 120x120x.6mm54-00641 1.0/1.2 DynamicMesh, Standard, 200x200x.6mm54-00344 1.7 DynamicMesh, Malleable, 40x40x.3mm54-00346 1.7 DynamicMesh, Malleable, 85x85x.3mm54-00345 1.7 DynamicMesh, Malleable, 120x120x.3mm54-00646 1.7 DynamicMesh, Standard, 90x90x.6mm54-00645 1.7 DynamicMesh, Standard, 120x120x.6mm54-00647 1.7 DynamicMesh, Standard, 200x200x.6mm

Micro Mesh54-00260 1.0-1.9 Micro Mesh, Malleable, 120x120x.1mm54-00261 1.0-1.9 Micro Mesh, Malleable, 120x60x.1mm54-00262 1.0-1.9 Micro Mesh, Malleable, 60x60x.1mm54-00270 1.0-1.9 Micro Mesh, Standard, 120x120x.2mm54-00271 1.0-1.9 Micro Mesh, Standard, 120x60x.2mm54-00272 1.0-1.9 Micro Mesh, Standard, 60x60x.2mm

Mid-Face/1.7mm OrthognathicMid-Face Fixation Plates, Standard Inlay 55-04724 24 Hole Straight Plate, malleable condensed 55-04720 20 Hole Straight Plate, malleable Standard L Plates55-06760 5 Hole L Plate 2mm Adv. 100˚ Left, standard55-06761 5 Hole L Plate 2mm Adv.100˚ Right, standard55-06762 5 Hole L Plate 5mm Adv. 100˚ Left, standard55-06763 5 Hole L Plate 5mm Adv. 100˚ Right, standard55-06764 5 Hole L Plate 8mm Adv. 100˚ Left, standard55-06765 5 Hole L Plate 8mm Adv. 100˚ Right, standard55-06766 6 Hole L Plate 12mm Adv. 100˚ Left, standard55-06767 6 Hole L Plate 12mm Adv. 100˚ Right, standardGSP L Plates55-07760 5 Hole L Plate 2mm Adv. 100˚ Left, GSP55-07761 5 Hole L Plate 2mm Adv. 100˚ Right, GSP55-07762 5 Hole L Plate 5mm Adv. 100˚ Left, GSP55-07763 5 Hole L Plate 5mm Adv. 100˚ Right, GSP55-07764 6 Hole L Plate 8mm Adv. 100˚ Left, GSP55-07765 6 Hole L Plate 8mm Adv. 100˚ Right, GSP55-07766 6 Hole L Plate 12mm Adv. 100˚ Left, GSP55-07767 6 Hole L Plate 12mm Adv. 100˚ Right, GSPMalleable L Plates55-04760 5 Hole L Plate 2mm Adv. 100˚ Left, malleable55-04761 5 Hole L Plate 2mm Adv. 100˚ Right, malleable55-04762 5 Hole L Plate 5mm Adv. 100˚ Left, malleable55-04763 5 Hole L Plate 5mm Adv 100˚ Right, malleable55-04764 6 Hole L Plate 8mm Adv. 100˚ Left, malleable55-04765 6 Hole L Plate 8mm Adv. 100˚ Right, malleable55-04766 6 Hole L Plate 12mm Adv. 100˚ Left, malleable55-04767 6 Hole L Plate 12mm Adv. 100˚ Right, malleable

55-06704 4 Hole Straight Plate with Bar55-06724 24 Hole Straight Plate55-06750 10 Hole Curved Plate55-06754 4 Hole Curved Plate with Bar55-06771 5 Hole T Plate55-05151 5 Hole Y Plate With 8mm Bar55-05164 7 Hole Double Y Plate

Mid-Face Fixation Plates, Bottom Module55-05716 16 Hole Straight Plate, locking55-05758 8 Hole Curved Plate, locking55-05731 2x2 Hole 3-D Plate, locking55-05733 6x2 Hole 3-D Plate, locking55-05751 5 Hole Y Plate with 4mm Bar, locking55-05752 5 Hole Y Plate with 8mm Bar, locking55-05742 7 Hole Double Y Plate, locking55-05761 5 Hole L Plate 2mm Adv., locking55-05763 5 Hole L Plate 5mm Adv., locking55-05765 6 Hole L Plate 8mm Adv., locking55-05767 6 Hole L Plate 12mm Adv., locking55-05779 8 Hole Y Plate, locking

1.7mm Orthognathic System InlayStandard L Plates55-06760 5 Hole L Plate 2mm Adv. 100˚ Left, standard55-06761 5 Hole L Plate 2mm Adv. 100˚ Right, standard55-06762 5 Hole L Plate 5mm Adv. 100˚ Left, standard55-06763 5 Hole L Plate 5mm Adv. 100˚ Right, standard55-06764 5 Hole L Plate 8mm Adv. 100˚ Left, standard55-06765 5 Hole L Plate 8mm Adv. 100˚ Right, standard55-06766 6 Hole L Plate 12mm Adv. 100˚ Left, standard55-06767 6 Hole L Plate 12mm Adv. 100˚ Right, standardGSP L Plates55-07760 5 Hole L Plate 2mm Adv. 100˚ Left, GSP55-07761 5 Hole L Plate 2mm Adv. 100˚ Right, GSP55-07762 5 Hole L Plate 5mm Adv. 100˚ Left, GSP55-07763 5 Hole L Plate 5mm Adv. 100˚ Right, GSP55-07764 6 Hole L Plate 8mm Adv.100˚ Left, GSP55-07765 6 Hole L Plate 8mm Adv. 100˚ Right, GSP55-07766 6 Hole L Plate 12mm Adv. 100˚ Left, GSP55-07767 6 Hole L Plate 12mm Adv. 100˚ Right, GSPMalleable L Plates55-04760 5 Hole L Plate 2mm Adv. 100˚ Left, malleable55-04761 5 Hole L Plate 2mm Adv. 100˚ Right, malleable55-04762 5 Hole L Plate 5mm Adv. 100˚ Left, malleable55-04763 5 Hole L Plate 5mm Adv. 100˚Right, malleable55-04764 6 Hole L Plate 8mm Adv. 100˚ Left, malleable55-04765 6 Hole L Plate 8mm Adv.100˚ Right, malleable55-04766 6 Hole L Plate 12mm Adv. 100˚ Left, malleable55-04767 6 Hole L Plate 12mm Adv. 100˚ Right, malleable

55-07781 4 Hole Z Plate Small Left, GSP55-07782 4 Hole Z Plate Small Right, GSP55-07783 4 Hole Z Plate Large Left, GSP55-07784 4 Hole Z Plate Large Right, GSP55-06724 24 Hole Straight Plate55-05151 5 Hole Y Plate With 8mm Bar55-05152 5 Hole Y Plate With 12mm Bar

Mid-Face/1.7mm Orthognathic1.7mm Orthognathic Module, Prebent LeFort I Inlay55-11700 11 Hole LeFort I Plate, 0mm Adv. Left55-12700 11 Hole LeFort I Plate, 0mm Adv. Right55-11703 11 Hole LeFort I Plate, 3mm Adv. Left55-12703 11 Hole LeFort I Plate, 3mm Adv. Right55-11704 11 Hole LeFort I Plate, 4mm Adv. Left55-12704 11 Hole LeFort I Plate, 4mm Adv. Right55-11706 11 Hole LeFort I Plate, 6mm Adv. Left55-12706 11 Hole LeFort I Plate, 6mm Adv. Right55-11708 11 Hole LeFort I Plate, 8mm Adv. Left55-12708 11 Hole LeFort I Plate, 8mm Adv. Right55-11710 11 Hole LeFort I Plate, 10mm Adv. Left55-12710 11 Hole LeFort I Plate, 10mm Adv. Right

1.7mm Orthognathic, Bottom Module55-10704 6 Hole Chin Plate 4mm, orthognathic 55-10706 6 Hole Chin Plate 6mm, orthognathic55-10708 6 Hole Chin Plate 8mm, orthognathic55-10710 6 Hole Chin Plate 10mm, orthognathic55-10712 6 Hole Chin Plate 12mm, orthognathic55-07734 2x34 Hole Double Strip Plate, malleable55-06734 2x34 Hole Double Strip Plate, standard55-05781 4 Hole Z Plate Small, locking Midface55-05783 4 Hole Z Plate Large, locking Midface55-05751 5 Hole Y Plate with 8mm Bar, locking Midface55-05752 5 Hole Y Plate With 12mm Bar, locking Midface55-05761 5 Hole L Plate 2mm Adv., locking 55-05763 5 Hole L Plate 5mm Adv., locking 55-05765 6 Hole L Plate 8mm Adv., locking 55-05767 6 Hole L-Plate 12mm Adv., locking

1.7mm Cross-Pin Self-Tapping Screws (5 screws per package)51-17003 1.7x3mm Self-Tapping Screw51-17004 1.7x4mm Self-Tapping Screw51-17005 1.7x5mm Self-Tapping Screw51-17006 1.7x6mm Self-Tapping Screw51-17007 1.7x7mm Self-Tapping Screw51-17008 1.7x8mm Self-Tapping Screw51-17010 1.7x10mm Self-Tapping Screw51-17012 1.7x12mm Self-Tapping Screw

1.7mm Cross-Pin Self-Drilling Screws (5 screws per package)51-17903 1.7x3mm Self-Drilling Screw51-17904 1.7x4mm Self-Drilling Screw51-17905 1.7x5mm Self-Drilling Screw51-17906 1.7x6mm Self-Drilling Screw

1.9mm Cross-Pin Emergency Screws (5 screws per package)51-19003 1.9x3mm Emergency Screw51-19005 1.9x5mm Emergency Screw51-19007 1.9x7mm Emergency Screw51-19009 1.9x9mm Emergency Screw

1.7mm Cross-Pin Locking Screws (5 screws per package)51-17504 1.7x4mm Locking Screw51-17505 1.7x5mm Locking Screw51-17506 1.7x6mm Locking Screw

1.9mm Cross-Pin Locking Emergency Screws (5 screws per package)51-19505 1.9x5mm Emergency Locking Screws

Drill Bits (Single use only)60-13506 1.3mm Twist Drill, 6mm WL, Stryker End60-13512 1.4mm Twist Drill, 12mm WL, Stryker End60-13570 1.3 x 79mm Twist Drill, 6mm WL, Stryker End60-19506 1.7mm Lag Twist Drill, 6mm WL, Stryker End

Product # Description

Indications For Use: Universal CMF SystemThe Stryker® Leibinger Universal CMF System is a Cranio-Maxillofacial (CMF) plate and screw system intended for osteotomy, stabilization and rigid fixation of CMF fractures and reconstruction.

Indications For Use: Universal Mandible SystemThe Stryker® Leibinger Universal Mandibular System is a mandibular plate and screw system intended for stabilization and rigid fixation of mandibular fractures and reconstruction.

Indications For Use: Locking Reconstruction Plate with attachable Temporary Condylar HeadThe Locking Reconstruction Plate with attachable Temporary Condylar Head is intended for temporary reconstruction in patients undergoing ablative tumor surgery requiring the removal of the mandibular condyle.This device is not for permanent implantation, for patients with TMJ or traumatic injuries, or for treatment oftemporomandibular joint disease (TMD).

2.0mm/2.3mmOrthognathic/Mandible2.0/2.3mm Orthognathic Module55-10554 6 Hole Locking Sagittal Split Plate,

6mm Bar55-10556 6 Hole Locking Sagittal Split Plate,

12mm Bar55-10564 4 Hole Locking Straight Sagittal Split Plate,

6mm Bar55-10566 6 Hole Locking Straight Sagittal Split Plate,

12mm Bar

2.0/2.3mm Orthognathic Drill Bits (Single use only)60-16035 Drill, WL 35mm, Stryker Shaft (1.6x115mm)60-19035 Drill, WL 35mm, Stryker Shaft (1.9x115mm)60-16820 1.6mm Twist Drill, 20mm WL, Sagittal Split,

Stryker End60-19820 1.9mm Twist Drill, 20mm WL, Sagittal Split,

Stryker End60-16908 1.6mm Twist Drill, 8mm WL, 90˚, Dental End60-16918 1.6mm Twist Drill, 18mm WL, 90˚, Dental End60-19908 1.9mm Twist Drill, 8mm WL, 90˚, Dental End60-19918 1.9mm Twist Drill, 18mm WL, 90˚, Dental End

MANDIBLE FRACTURE SYSTEM IMPLANTS

Mini Plates (Order Qty: Pkg of 1)55-10504 Mini Plate, 4 holes55-10505 Mini Plate, 4 holes w. bar55-10506 Mini Plate, 6 holes55-10516 Mini Plate, 16 holes55-10515 Locking 16 Hole Straight Plate, 5mm Hole Spacing55-10507 6 Hole Straight Plate with Bar55-10503 4 Hole Straight Plate Longer Bar

3D Plates (Order Qty: Pkg of 1)55-10532 3D Plate, 3x2 Hole, Rectangle55-10542 3D Plate, 4x2 Hole, Square55-10562 3D Plate, 6x2 Hole, Curved, Square

Fracture Plates (Order Qty: Pkg of 1)55-15504 Fracture Plate, 4 holes55-15505 Fracture Plate, 4 holes w. bar55-15506 Fracture Plate, 6 holes55-15507 Fracture Plate, 6 holes w. bar55-15514 Fracture Plate, 14 holes55-15524 C-Shaped Fracture Plate, 4 holes55-15526 Angle Fracture Plate, 6 holes, 115˚55-15536 Angle Fracture Plate, 6 holes, 140˚

Compression Plates (Order Qty: Pkg of 1)55-15570 2.0mm Compression Plate, 4 holes55-15575 2.3mm Compression Plate, 4 holes55-15580 2.0mm Compression Plate, 6 holes55-15585 2.3mm Compression Plate, 6 holes

Fracture Plate Templates65-15504 Template for 55-1550465-15505 Template for 55-1550565-15506 Template for 55-1550665-15507 Template for 55-1550765-15514 Template for 55-1551465-15524 Template for 55-1552465-15526 Template for 55-1552665-15536 Template for 55-1553665-15570 Template for 55-1557065-15580 Template for 55-15580

MANDIBLE RECONSTRUCTION SYSTEM IMPLANTS

Primary Reconstruction Plates (Order Qty: Pkg of 1)55-15911 Primary Recon Plate, 11 holes, w. template55-15917 Primary Recon Plate, 17 holes, w. template55-15920 Primary Recon Plate (Hemi), 5+17,

Right w. template55-15922 Primary Recon Plate (Hemi), 5+17,

Left w. template

Reconstruction Plates (Order Qty: Pkg of 1)55-28911 Recon Plate, 11 holes, w. template55-28917 Recon Plate, 17 holes, w. template55-28920 Recon Plate (Hemi), 6+17, Right w. template55-28922 Recon Plate (Hemi), 6+17, Left w. template55-28930 Recon Plate (Full), 6+17+6, w. template55-28932 Recon Plate (Full), 6+15+6, w. template55-28934 Recon Plate (Full), 6+13+6, w. template

Temporary Condylar Prostheses (Order Qty: Pkg of 1)56-25001 Temporary Condylar Prostheses, Left56-25002 Temporary Condylar Prostheses, Right

Condyle Fastening Screws (2 screws per package)56-25000 Condyle Fastening Screws

Product # Description Product # Description

2.0mm/2.3mmOrthognathic/Mandible2.0mm Cross-Pin Bone Screws(5 screws per package)52-20404 2.0x4mm, Bone Screw, Cross-Pin52-20405 2.0x5mm, Bone Screw, Cross-Pin52-20406 2.0x6mm, Bone Screw, Cross-Pin52-20407 2.0x7mm, Bone Screw, Cross-Pin52-20408 2.0x8mm, Bone Screw, Cross-Pin52-20410 2.0x10mm, Bone Screw, Cross-Pin52-20412 2.0x12mm, Bone Screw, Cross-Pin52-20414 2.0x14mm, Bone Screw, Cross-Pin52-20416 2.0x16mm, Bone Screw, Cross-Pin52-20418 2.0x18mm, Bone Screw, Cross-Pin52-20420 2.0x20mm, Bone Screw, Cross-Pin

2.0mm Cross-Pin Locking Screws (5 screws per package)52-20504 2.0x4mm, Locking Screw, Cross-Pin52-20505 2.0x5mm, Locking Screw, Cross-Pin52-20506 2.0x6mm, Locking Screw, Cross-Pin52-20507 2.0x7mm, Locking Screw, Cross-Pin52-20508 2.0x8mm, Locking Screw, Cross-Pin52-20510 2.0x10mm, Locking Screw, Cross-Pin52-20512 2.0x12mm, Locking Screw, Cross-Pin52-20514 2.0x14mm, Locking Screw, Cross-Pin52-20516 2.0x16mm, Locking Screw, Cross-Pin52-20518 2.0x18mm, Locking Screw, Cross-Pin52-20520 2.0x20mm, Locking Screw, Cross-Pin

2.3mm Cross-Pin Bone Screws (5 screws per package)52-23404 2.3x4mm, Bone Screw, Cross-Pin52-23406 2.3x6mm, Bone Screw, Cross-Pin52-23408 2.3x8mm, Bone Screw, Cross-Pin52-23410 2.3x10mm, Bone Screw, Cross-Pin52-23412 2.3x12mm, Bone Screw, Cross-Pin52-23414 2.3x14mm, Bone Screw, Cross-Pin52-23416 2.3x16mm, Bone Screw, Cross-Pin52-23418 2.3x18mm, Bone Screw, Cross-Pin52-23420 2.3x20mm, Bone Screw, Cross-Pin

2.3mm Cross-Pin Locking Screws (5 screws per package)52-23504 2.3x4mm, Locking Screw, Cross-Pin52-23506 2.3x6mm, Locking Screw, Cross-Pin52-23508 2.3x8mm, Locking Screw, Cross-Pin52-23510 2.3x10mm, Locking Screw, Cross-Pin52-23512 2.3x12mm, Locking Screw, Cross-Pin52-23514 2.3x14mm, Locking Screw, Cross-Pin52-23516 2.3x16mm, Locking Screw, Cross-Pin52-23518 2.3x18mm, Locking Screw, Cross-Pin52-23520 2.3x20mm, Locking Screw, Cross-Pin

2.7mm Emergency Cross-Pin Bone Screws (5 screws per package)52-27408 2.7x8mm Bone Screw, Cross-Pin52-27410 2.7x10mm Bone Screw, Cross-Pin52-27412 2.7x12mm Bone Screw, Cross-Pin52-27414 2.7x14mm Bone Screw, Cross-Pin52-27416 2.7x16mm Bone Screw, Cross-Pin52-27418 2.7x18mm Bone Screw, Cross-Pin52-27420 2.7x20mm Bone Screw, Cross-Pin

2.7mm Emergency Cross-Pin Locking Screws (5 screws per package)52-27508 2.7x8mm, Locking Screw, Cross-Pin52-27510 2.7x10mm, Locking Screw, Cross-Pin52-27512 2.7x12mm, Locking Screw, Cross-Pin52-27514 2.7x14mm, Locking Screw, Cross-Pin52-27516 2.7x16mm, Locking Screw, Cross-Pin52-27518 2.7x18mm, Locking Screw, Cross-Pin52-27520 2.7x20mm, Locking Screw, Cross-Pin

Mandible Twist Drills (single use only)60-16005 1.6mm Twist Drill, 5mm stop, Stryker60-16007 1.6mm Twist Drill, 7mm stop, Stryker60-16035 1.6mm Twist Drill, 35mm working length, Stryker60-16050 1.6mm Pilot Drill, 50mm working length, Stryker60-20050 2.0mm Overdrill, 50mm working length, Stryker60-19035 1.9mm Twist Drill, 35mm working length, Stryker60-16535 1.6mm Twist Drill 26mm WL, Stryker End60-19535 1.9mm Twist Drill 26mm WL, Stryker End60-16820 1.6mm Twist Drill, 20mm WL, Sagittal Split, Stryker End60-19820 1.9mm Twist Drill, 20mm WL, Sagittal Split, Stryker End60-16908 1.6mm Twist Drill, 8mm WL, 90 ˚, Dental End60-16918 1.6mm Twist Drill, 18mm WL, 90 ˚, Dental End60-19908 1.9mm Twist Drill, 8mm WL, 90 ˚, Dental End60-19918 1.9mm Twist Drill, 18mm WL, 90 ˚, Dental End

Product # Description

Stryker Leibinger Inc.4100 East Milham AvenueKalamazoo, MI 49001 USATel.: (269) 324-5346Toll Free: (800) 962-6558Fax: (877) 648-7114

Stryker Leibinger GmbH & Co. KG.Bötzinger Straße 41D-79111 FreiburgGermanyTel.: (0761) 4512-0Fax: (0761) 4512-120

Licensed by D.Wolter

STRYKER LEIBINGER and SMARTLOCKare registered and/or unregisteredtrademarks of STRYKER CORPORATION.

Universal System Ordering Information

Universal InstrumentationUpper-Face/Mid-Face Instrument Tray29-13030 Upper-Face/Mid-Face Instrument Tray01-08110 Universal Plate Forceps, Angled62-12176 Upperface/Midface Plate Bender Left62-12175 Upperface/Midface Plate Bender/Cutter Right62-12173 Upperface/Midface 3-Prong Bender62-18330 Upperface/Midface In-Situ Plate Cutter62-20000 Universal Drill Guide Handle62-17517 Drill Guide Insert for 1.7mm Locking Screws62-12170 Upperface/Midface Screwdriver Blade (1.2/1.7)62-20285 Universal Screwdriver Handle, Metal62-32440 Universal Bone Repositioning Instrument60-20012 Repositioning Pin Twist Drill

Orthognathic Instrument Tray29-13040 Orthognathic Instrument Tray01-08110 Plate Holding Forceps, Angled01-08730 Depth Measuring Gauge62-12176 Upperface/Midface Plate Bender Left62-12175 Upperface/Midface Plate Bender/

Cutter Right62-20000 Universal Drill Guide Handle62-17517 Drill Guide Insert for 1.7mm Locking

Screws62-00303 Trocar 62-00302 Cheek Retractor Fixed62-00309 Trocar Handle Orthognathic62-12170 Upperface/Midface Screwdriver

Blade (1.2/1.7)62-20285 Universal Screwdriver Handle, Metal62-32440 Universal Bone Repositioning Instrument 60-20012 Repositioning Pin Twist Drill

Mandible Instrumentation64-00230 Recon Bender/Cutter, Left64-00231 Recon Bender/Cutter, Right64-00242 Bender/Cutter, Left64-00243 Bender/Cutter, Right64-00250 Roller Bender for Mandibular Plates64-00175 Plate/Bone Forceps, Left64-00176 Plate/Bone Forceps, Right01-08110 Plate Holding Forceps, Angled01-08630 Bone Reduction Forceps01-14463 Bone Clamp Dingman62-20290 Screwdriver Ratchet Handle62-20295 Screwdriver Handle Revolving/Rigid62-20130 Screwdriver Blade (2.0/2.3/2.7mm Emergency)62-00301 Trocar Handle62-00302 Cheek Retractor for 62-00301, Fixed62-00303 Trocar62-00201 Drill Guide, Centric, for 2.0mm Screws62-00238 Drill Guide, Centric, for 2.3mm Screws62-00202 Drill Guide, Eccentric, for 2.0mm Screws62-00146 1.6mm Drill Guide, Lag, Pilot Drill62-00148 2.0mm Drill Guide, Lag, Overdrill62-20500 Tap for 2.0mm Mandibular Screws62-20501 Tap for 2.0mm Mandibular Lag Screws62-23150 Tap for 2.3mm Mandibular Screws62-23501 Measuring Sleeve, 2.0/2.3mm Taps60-94120 Countersink for Biconcave Washers, Hex60-80142 Abrasive Burr, Stryker Shaft60-80535 Temporary Recon Screw Holder01-08730 Depth Measuring Gauge56-00400 Biconcave Titanium Washers

Optional Instrumentation62-20120 Drill Guide Insert for 2.0mm Locking Screws62-20520 Drill Guide Insert for 2.0mm Screws Eccentric62-20123 Drill Guide Insert for 2.3mm Locking Screws62-20523 Drill Guide Insert for 2.3mm Screws Eccentric62-20705 Lag Screw Depth Guide62-92023 Right Angle Screwdriver Blade (2.0/2.3mm)62-98730 Right Angle Depth Gauge6514-7-100 Right Angle Luhr Fritzemeier Screwdriver62-00308 Orthognathic Cheek Retractor Variable62-18500 Universal Screw Guide62-00192 Drill Guide eccentric, for 2.3mm screws62-20284 1.2mm Screwdriver Handle, Upper Face29-13043 Screwdriver Rack

Product # Description

Universal InstrumentationImplant Modules29-12000 Upper-Face Module29-12001 Upper Face Inlay I29-13050 Universal Fracture Module29-13060 Universal Recon Module29-17000 Mid-Face Module29-17001 Mid-Face Module Fracture Inlay29-20230 Mandible Module29-20231 Mandible Module Inlay29-17200 Orthognathic Module 29-17201 Orthognathic Module Standard Inlay29-17202 Orthognathic Module Prebent Inlay29-12175 Auxillary Screw Module 1.2/1.7

Containers29-13000 Universal Container Full Size29-13001 Universal Container Half Size29-13020 Universal Mandible Instrument/Fx Tray29-13021 Universal Mandible Recon Tray29-13022 Universal Accessory tray29-13042 Drill Guide Instrument Rack29-13052 Universal Mesh Tray50-00301 Description Shield “1.2mm Upper-Face”50-00302 Description Shield “1.2mm Upper-Face /

1.7mm Mid-face”50-00303 Description Shield “1.7mm Mid-face”50-00304 Description Shield “Orthognathic System”52-00201 Description Shield “Mandible Fracture”52-00202 Description Shield “Mandible Recon”

Implant Markers (2 per package)50-12000 1.2 Self Tapping Screw Marker50-12900 1.2 Self Drilling Screw Marker50-17000 1.7 Self Tapping Screw Marker50-17900 1.7 Self Drilling Screw Marker50-20000 2.0 Bone Screw Marker50-20500 2.0 Locking Screw Marker50-23000 2.3 Bone Screw Marker50-23500 2.3 Locking Screw Marker50-06700 “Standard”50-04700 “Malleable”50-07700 “G.S.P.”52-00200 “2.0mm’’52-00230 “2.3mm”52-00270 “2.7mm”52-00003 3mm Marker52-00004 4mm Marker52-00005 5mm Marker 52-00006 6mm Marker52-00007 7mm Marker52-00008 8mm Marker52-00010 10mm Marker52-00012 12mm Marker52-00014 14mm Marker52-00016 16mm Marker52-00018 18mm Marker52-00020 20mm Marker52-00024 24mm Marker52-00027 27mm Marker52-00030 30mm Marker52-00033 33mm Marker52-00036 36mm Marker52-00039 39mm Marker52-00042 42mm Marker52-00210 ‘’Bone Screws Marker’’52-00215 ‘’Locking Screws Marker’’