REPORT

For

Acura Embedded Systems Inc.

Unit # 1, 7711-128 Street Surrey, British Columbia,

V3W 4E6, Canada

Date: August 8, 2011 Report No.: 10052-1S Revision No.: 0 Project No.: 10052 Equipment: Mobile Computer System Part/Model No.: PowerBrick / AcuBrite Series

ONE STOP GLOBAL CERTIFICATION SOLUTIONS

3133-20800 Westminster Hwy, Richmond, BC

V6V 2W3, Canada Phone: 604-247-0444

Fax: 604-247-0442 www.labtestcert.com

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 2 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

TABLE OF CONTENTS

TEST REPORT ........................................................................................................................................................ 3 Summary of Testing: ................................................................................................................................................ 6 Test Equipment Used ............................................................................................................................................... 7 Photos ...................................................................................................................................................................... 8 Appendix A – Test Data Section ............................................................................................................................ 11 Appendix B – ISO 17025:2005 Accreditation Certificate ....................................................................................... 18 

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 3 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

TEST REPORT

Report reference No. ...................... : 10052-1S

Report Revision History: Rev_0: Issued August 8, 2011

Compiled by (printed name and signature) .......... :

Eugen Rapa

Approved by (printed name and signature) .......... :

Sandeep Bhayana

Date of issue .................................... : August 8, 2011 Note: By signing this report, both the Testing Technician and the Reviewer hereby declare to abide by the applicable LabTest policies: 1.) Statement of Independence # 3014 (LabTest Employees), 2.) Independence, Impartiality, and Integrity #1039, clause 11 (Engineering Service Subcontractors), or

3. ) Independence, Impartiality, and Integrity #1019, clause 3.5 (Testing Subcontractors).

Testing Laboratory Name ............. : LabTest Certification Inc.

Address ........................................... : 3133 – 20800 Westminster Hwy, Richmond, B.C. V6V 2W3

Test Location Name ..................... : Powertech Labs Inc.

Address ............................................ : 12388 - 88 Avenue Surrey, British Columbia, Canada, V3W 7R7

Applicant's Name .......................... : Acura Embedded Systems Inc.

Address ........................................... : Unit # 1, 7711-128 Street, Surrey, British Columbia, V3W 4E6

Test specification

Test Procedure ................................. : MIL-STD-810F- Figure 514.5C-1 U.S Highway truck

vibration exposure vertical.

Copyright 2003 IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader’s interpretation of the reproduced material due to its placement and context.

Test item description .................... : Mobile Computer System

Manufacturer ................................... : Acura Embedded Systems Inc.

Model and/or type reference ........... : Model: AcuBrite-15, Model: PowerBrick™, Model: AcuConnect, Model: PowerBrickAtom™.

Serial/Sample numbers ................... : S/N: P1568ETAV10470094, S/N: ACPB311007008, Sample number: 882735, S/N: AC11ATOM0102

Particulars: test item vs. test requirements

Test case verdicts

Test case does not apply to the test object ..................................................

(N)/A

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 4 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

Test item does meet the requirement .............................................................

(F)ail

Test item does not meet the requirement ........................................

(P)ass

Testing

Date of receipt of test item ................. July 2, 2011

Date(s) of performance of test ........... July 4-6, 2011

Appendix A: Test Data

General remarks

”This report is not valid as a CB Test Report unless appended by an approved CB Testing Laboratory and appended to a CB Test Certificate.

The test result presented in this report relate only to the object(s) tested. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory.

”(see Enclosure #)" refers to additional information appended to the report. "(see appended table)" refers to a table appended to the report.

Throughout this report a comma is used as the decimal separator.

Throughout this report a period is used as the decimal separator.

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 5 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

List of Tested Items

Item No. Model No. Serial/Sample No.

1 AcuBrite-15 P1568ETAV10470094

2 PowerBrick™ ACPB311007008

3 AcuConnect 882735

4 PowerBrickAtom™ AC11ATOM0102

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 6 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

Summary of Testing:

Test No. TEST VERDICT

1 Random Vibration Test Frequency Range Control Variable 10 - 40Hz 0.015 g2/hz spectral density 500Hz 0.00015 g2/hz spectral density Duration: 90 minutes per axis

Test conducted in all 3 axes. Unit was operational during testing.

P

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 7 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

Test Equipment Used

Item Type Equipment

No

Calibration date Calibration Certificate

No

Calibration Laboratory Last Due

1 Unholtz-Dickie SAI30F-R16C-3

1 __ __ __ __

2 Dactron Laser Vibration Controller

1670 May 2, 2011 May 2, 1012 __ Powertech

Labs

3 PCB 353 B34 Control Accelerometer

0926 August 12, 2010 August 12,

2011 __

Powertech Labs

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 8 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

Photos

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 9 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 10 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 11 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

Appendix A – Test Data Section

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 12 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 13 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 14 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 15 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 16 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 17 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 18 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

Appendix B – ISO 17025:2005 Accreditation Certificate

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 19 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 20 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

Prepared by: LabTest Certification Inc. Client: Acura Embedded Systems Inc.Date Issued: August 8, 2011 Report No.:10052-1SProject No.: 10052 Revision No.: 0

Page 21 of 21

This document shall not be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from LabTest Certification Inc.

DCN: 1012, Rev 5

END OF REPORT