1046532 uponor product catalog is 2011

I N D O O R C L I M AT E S O LU T I O N S

P R O D U C T C ATA LO G 2 0 1 1

Uponor Special Applications

3

List of content

Uponor industrial underfloor heating

Uponor industrial fl oor heating PE-Xa pipes •••••••••••••••••••••••••••••••••••• 9

Uponor PE-Xa Q&E fi ttings ••••••••••••••••••••••••••••••••••••••••••••••••• 10

Uponor industrial fl oor heating fi xation and accessories ••••••••••••••••••••••••••• 11

Uponor industrial fl oor heating manifold and accessories••••••••••••••••••••••••••• 13

Uponor snow and ice melting

Uponor snow and ice melting pipes ••••••••••••••••••••••••••••••••••••••••••• 15

Uponor snow and ice melting manifold and accessories •••••••••••••••••••••••••••• 16

Uponor sport floor heating

Uponor sport fl oor PE-Xa pipes •••••••••••••••••••••••••••••••••••••••••••••• 22

Uponor sport fl oor PE-Xa Q&E fi ttings••••••••••••••••••••••••••••••••••••••••• 23

Uponor sport fl oor fi xation and accessories ••••••••••••••••••••••••••••••••••••• 24

Uponor comfort panel

Uponor comfort panel ••••••••••••••••••••••••••••••••••••••••••••••••••••• 26

Uponor comfort panel - fi ttings •••••••••••••••••••••••••••••••••••••••••••••• 28

Uponor comfort panel - accessories ••••••••••••••••••••••••••••••••••••••••••• 30

Uponor gypsum panel

Uponor gypsum panel ••••••••••••••••••••••••••••••••••••••••••••••••••••• 33

Uponor gypsum panel - accessories ••••••••••••••••••••••••••••••••••••••••••• 34

EEI-INT-SA-03.11

Uponor Special Applications Heating/Cooling > List of content

Abbreviations •••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 4

Radiant heating and cooling systems - for all areas of application the right system 6

Overview of Special Application ••••••••••••••••••••••••••••••••••••••••••• 8

4 EEI-INT-SA-03.11

Uponor Special Applications Heating/Cooling > Abbreviations

Abbreviations

A/F [mm] across fl atsA [m²] square measurec/c [mm] centre - centre distancecolour [-] colourd [mm] diameterd1 [mm] diameter 1d2 [mm] diameter 2d3 [mm] diameter 3DN [mm] diameter nominalFT ["] female threadh [mm] heighth1 [mm] height 1l [m] length in meterl [mm] lengthl1 [mm] length 1MT ["] male threadMT [-] male thread (metric)OV [V] operating voltagep [bar] pressureP [W] effective powers [mm] strength / wall thicknesssd [mm] side distanceType [-] TypeV [l/m] volumew [mm] widthWeight [kg] Unit Weightz [mm] z-value

Shortcut unit Description

5EEI-INT-SA-03.11

Uponor Special Applications Heating/Cooling > List of content

Uponor tools and accessories

Uponor tools - pipe cutters ••••••••••••••••••••••••••••••••••••••••••••••••• 42

Uponor PE-Xa Q&E expander tools/accessories •••••••••••••••••••••••••••••••••• 42

International sales and delivery terms •••••••••••••••••••••••••••••••••••••• 44

Item search register ••••••••••••••••••••••••••••••••••••••••••••••••••••• 46

How to contact us ••••••••••••••••••••••••••••••••••••••••••••••••••••••• 47

List of content

Uponor controls

Uponor room control •••••••••••••••••••••••••••••••••••••••••••••••••••••• 37

Uponor controller ••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 38

Uponor control accessories •••••••••••••••••••••••••••••••••••••••••••••••••• 41

6 EEI-INT-SA-03.11

Uponor Special Applications Heating/Cooling > Radiant heating and cooling systems - for all areas of application the right system

Radiant heating and cooling systems - for all areas of application the right system

Special Applications

Industrial UFH

Heating/Cooling of productions halls, warehouses or logistic centers

Snow & ice melting

Keeping areas snow & ice free

Sports floor heating

Sports floor heating for area elastic floors

Comfort panel

Ceiling cooling for suspended ceilings

7EEI-INT-SA-03.11

Ceiling cooling systems

Gypsum panel

Ceiling cooling for gypsum board ceilings

Contec

Concrete core activation with thermal storage capacity

Contec ON

The highly efficient surface close building part activation

8 EEI-INT-SA-03.11

Uponor Special Applications Heating/Cooling > Overview of Special Application

Overview of Special Application

Industrial UFH

Heating/Cooling of productions halls, warehouses or logistic centers

Snow & ice melting

Keeping areas snow & ice free

Sports floor heating

Sports floor heating for surface elastic floors

Comfort panel

Ceiling cooling for suspended ceilings

Contec

Concrete core activation with thermal storage capacity

Contec ON

The highly efficient surface close building part activation

Uponor Special Applications Heating/Cooling > Uponor industrial underfl oor heating

EEI-INT-SA-03.11 9

Uponor Industrial Underfl oor Heating

Uponor industrial underfl oor heating is a low-temperature heat distribution system for heating industrial spaces. The system is built directly into the concrete fl oor slab. It is even possible to make use of the standard steel reinforcement

for the concrete slab as a support structure for the heating pipes. Heat can be supplied by any conventional warm water heating system designed for use in the type of building being in question.

Your advantages Rapid return on investment Total design space freedom Optimal building space utilisation Uniform temperature profi le Low air speeds No dust circulation Stimulating working environment No maintenance costs Proven technology Extensive declaration of liability

System components

Uponor industrial clamp track

Systempipe / -Fittings Additional components Manifold / Cabinets

Uponor industrialmanifold 25-G 1½

Uponor cable tie Uponor Q&E PPSU coupling

Uponor pipe clips Uponor Q&E brass connection with male thread

Uponor PE-Xa pipe 25x2.3 or 20x2.0

150

/2

D

Uponor tying wire

Uponor pipe bend suport

Uponor conduit


Uponor industrial fl oor heating PE-Xa pipes

Uponor PE-Xa pipes

PE-Xa pipe with an oxygen diffusion barrier manufactured from peroxide cross-linked polyethylene (PE-Xa) using the Engel method complying with e.g. prENISO 15875 “Plastics piping systems for hot and cold water installations - Cross-linked polyethylene” with an oxygen diffusion barrier of EVOH (ethyl vinyl alcohol). Uponor pipes fulfi l the requirements for oxygen diffusion resistance as per DIN 4726. Malfunction temperature 95°C. Design pressure 8,8 bar (at 70°C).

Item no. d [mm] s [mm] l [m] V [l/m] Description unit

1009230 20 2.0 240 0.2 Uponor pe PE-Xa Q&E pipe 20x2.0240 m coil 240 m


Uponor eval PE-Xa Q&E pipe in coils

Pipes manufactured from peroxide cross-linked polyethylene (PE-Xa) using the Engel method, complying with e.g. EN ISO 15875 ”Plastics piping systems for hot and cold water installations - Cross-linked polyethylene”. Includes an ethylene vinyl alcohol (EVOH) oxygen barrier layer, complying with DIN 4726, to prevent corrosion of system components. This barrier has been specially developed to work together with Uponor Q&E fi tting technology. Classifi cation of service conditions (including typical fi eld of application): Application class 4 - Underfl oor heating and low temperature radiators, malfunction temperature 95 °C. Design pressure 6 bar. Application class 5 - high temperature radiators, malfunction temperature 95 °C. Design pressure 6 bar.

Item no. d [mm] s [mm] l [m] p [bar] Description unit

1023448 25 2.3 205 6 Uponor eval PE-Xa Q&E pipe 25x2.3coil lengths 205 m 205 m

1047615 25 2.3 303 Uponor eval PE-Xa Q&E pipe 25x2.3coil lengths 303 m 303 m


Uponor PE-Xa Q&E fi ttings

Uponor Q&E PPSU coupling equal

Made of PPSU. Note: Uponor Q&E Ring must be ordered separately!

Item no. d [mm] p [bar] Description unit

1008932 20 6+10 Uponor Q&E PPSU coupling 20-20 5 pcs


Uponor Q&E brass connection with male thread

Made of DR brass. Male thread acc.to DIN EN 10226-1 for sealing in. Note: Uponor Q&E Ring must be ordered separately!

Item no. d [mm] MT ["] p [bar] Description unit

1023006 20 R ¾ 6+10 Uponor Q&E connection with male threadtaper, 20-¾ 5 pcs


1023008 25 R1 6+10 Uponor Q&E connection with male threadtaper, 25-1 5 pcs

EEI-INT-SA-03.1110


Uponor PE-Xa Q&E fi ttings

Uponor Q&E brass connection with female thread

Made of DR brass. Female thread acc. to DIN EN 10226-1. Note: Uponor Q&E Ring must be ordered separately!

Item no. d [mm] FT ["] p [bar] Description unit

1023011 20 Rp ¾ 6+10 Uponor Q&E connection with female thread20-¾ 5 pcs


1023013 25 Rp 1 6+10 Uponor Q&E connection with female thread25-1 5 pcs

Uponor Q&E ring natural

Made of PE-X. Uponor Q&E rings natural intended for Uponor Q&Efi ttings. For PE-Xa pipe dimensions 16, 20, 25, 32, 40, 50 and 63 mm.

Item no. d [mm] colour [-] p [bar] Description unit

1042836 20 natural 6+10 Uponor Q&E ring natural forUponor PE-Xa dim 20 mm 20 pcs

1042840 25 natural 6+10 Uponor Q&E ring natural with stop edgefor Uponor PE-Xa dim 25 mm 20 pcs

Uponor industrial fl oor heating fi xation and accessories

ra

d

l b

h


Uponor clamp track for fi xation of Uponor PEX pipes.

Item no. w [mm] h [mm] d [mm] c/c [mm] l [mm] Description unit

1005358 40 26 20 50 3000 Uponor clamp track for 20 mm pipes 30 m

ra

d

l b

h





h

b

Uponor fastening nail

For fastening the Uponor clamp track 25

Item no. w [mm] h [mm] Description unit

1005291 36 50 Uponor fastening nail forindustrial fl oor heating clamp track 500 pcs

EEI-INT-SA-03.11 11


Uponor industrial fl oor heating fi xation and accessories

b

h

d

h1

d1

Uponor pipe clips

For fastening Uponor pipes on reinforcement steel meshes.

Item no. h [mm] h1 [mm] w [mm] d [mm] d1 [mm] Description unit

1005289 57 27 38 25 3-8 Uponor pipe clipsfor PE-Xa pipe 25x2.3 250 pcs

l

D

Uponor cable tie

For fastening Uponor pipes on reinforcement steel meshed.Made of polyamide.

Item no. w [mm] l [mm] Description unit

1005287 5 200 Uponor cable ties, length 200 mm 100 pcs

1005372 7 300 Uponor cable tie length 300 mm 100 pcs

Uponor tying wire

For fastening Uponor pipes on reinforcement steel meshes. Made of steel.250 pcs per bag.

Item no. Description unit

1009222 Uponor tying wire, 150 x 1.25 250 pcs

Uponor pipe bend support

Made of galvanized steel as bend support for the pipes in the manifold area.

Item no. d [mm] Description unit

1009233 20 Uponor pipe bend support20 mm 50 pcs

1009006 25 Uponor pipe bend support22-25 mm 20 pcs

Uponor conduit

Manufactured from high density polyethylene (HDPE). Used for pipe-in-pipe (PIP) installations to reduce the risk for water amages, and to allow for fl exible media pipe to be replaced.

Item no. d [mm] d1 [mm] colour [-] Description unit

1001212 34/28 f. 25 black Uponor Wirsbo conduit 34/28 mm|blackin coils of 50 m 50 m

EEI-INT-SA-03.1112


Uponor industrial fl oor heating manifold and accessories

Uponor industrial manifold 25-G 1½

Uponor Industrial Manifold 25-G 1½ as supply / return for Industrialheating, made of:- supply-segment, with control valves for preadjustment, heating loop connection for PE-Xa Pipe 25x2,3 with compression adapter.- return-segment with thermostat upper section incl. cap for locking, Uponor actuator can be mounted directly on the return manifold , heating loop connection for PE-Xa Pipe 25x2,3 with compression adapter

Spacing of outlet: 100 mmMaterial: fi breglass reinforced Polyamidmax. operating temperatur: 60 °Cmax. operating pressure 6 bar

induvidual combination up to 20 loops max.

Number of needed brackets

loops 2-5 6-9 10-14 15-19 20bracket 2 3 4 5 6


1045813 Uponor industrial manifold 25-G 1 ½“ 1 set

55150

110

G1 1

/2

>370

>200

166100

Uponor industrial manifold basic kit

Uponor Industrial Manifold Basic Kitfor mounting the industrial manifold, made of:- 2 St. brackets short- 2 St. brackets long- 2 St. fi lling valve brass- 2 St. thermometer 0 - 60°C- 1 St. manometer- 2 St. endcap- 2 St. fl at sealing screw connection piece with swivel nut- 1 St. mounting material: 8x screws 6x60mm 8x plastic anchor 8x40mm 2x fl at sealing 44x32x2


1045815 Uponor industrial manifold basic kit 1 set

EEI-INT-SA-03.11 13


Uponor industrial fl oor heating manifold and accessories

Uponor industrial manifold bracket kit

Uponor Industrial Manifold Bracket Kitfor mounting the Industrial manifold, made of:- 2 St. brackets short- 2 St. brackets long- 1 St. mounting material: 8x screws 6x60mm 8x plastic anchor 8x40mm


1045816 Uponor industrial manifold bracket kit 1 set

Uponor industrial flowmeter

Uponor Industrial FlowmeterFor adjusting the water quantity of the individual heating loops in a rangeof 4 -20 l/min. Water quantity is indicated in the inspection window. Withshut-off function. Made of fi bre-glass reinforced polyamid.

Material: fi breglass reinforced Polyamid


1030134 Uponor industial fl owmeter 1 pcs

Uponor industrial ball valve G 1½

Uponor Industrial Ball Valve G 1½for use with the Uponor Industrial manifold G 1½connection:- G 1½ FT- G 1½ MTMaterial: brass


1030135 Uponor industrial ball valve G 1 ½“ 1 set

EEI-INT-SA-03.1114

Uponor Special Applications Heating/Cooling > Uponor snow and ice melting

EEI-INT-SA-03.11 15

Uponor snow and ice melting

Uponor snow and ice melting system is best suitable for all outside surfaces which are provided with a solid covering. It will be especially used for driveways, ramps, fi re department or hospital approach roads, helicopter

landing zones, sidewalks, football pitches, etc..

Your advantages System ensures a maximum of security - round the clock Automatically deicing, no more shoveling of snow Avoids environmental stress and damage through de-icing

salt Usage of industrial waste heat possible Fast and easy installation with robust Uponor PE-X pipes Complete system with all components available Reduces slip and fall liability

System components Systempipe / -Fittings Additional components Manifold / Cabinets

Uponor compression adapterPE-X


Uponor Manifolds


Uponor Supply pipes

Uponor tying wire

Uponor supply accessories

Uponor electrofusion fitting

Uponor snow and ice melting pipe 25x2.3

D

Uponor cable tie Uponor pipe bend suport

Uponor conduit


Uponor snow and ice melting pipes

Uponor snow and ice melting pipe

Uponor snow and ice melting pipes manufactured from cross-linked polyethylene, complying with e.g. EN ISO 15875 ”Plastics piping systems for hot and cold water installations - Cross-linked polyethylene”. Application for underfl oor heating up to 50 °C water temperature Design pressure 4 bar.


1022341 Uponor Meltaway PE-X pipe 25x2.3920 m 920 m

1033625 Uponor Meltaway PE-X pipe 25x2.31020 m 1020 m

1033626 Uponor Meltaway PE-X pipe 25x2.3other lengths <1000m 1 m

Uponor snow and ice melting manifold and accessories

Uponor manifolds

Uponor snow and ice melting single manifold made of high density polyethylene (HDPE) pipe and equipped with compact-welded couplings. Couplings between centres are 500mm.


1033637 Uponor Meltaway manifold 10 waysingle outlet, C/C 600 75 6m 1 pcs












Uponor manifolds

Uponor snow and ice melting double manifold made of high density polyethylene (HDPE) pipe and equipped with compact-welded couplings oriented in two directions with an angle of 120° between them.


1033634 Uponor Meltaway manifold 12 waydouble outlet, C/C 500 75 6m 1 pcs





EEI-INT-SA-03.1116



Uponor coupling

Uponor straight couplings for snow and ice melting PE-X pipes 25x2.3 Made of HDPE.


1033672 Uponor Meltaway coupling 25x2.3 mmshort, 145 mm 1 pcs

1033678 Uponor Meltaway coupling 25x2.3 mmlong, 290 mm 1 pcs

Uponor supply pipes

Uponor snow and ice melting supply pipes made of HDPE.


1033628 Uponor HDPE supply pipe 75x6.8 mmL=6000 mm 1 m



Uponor supply pipes tees

Uponor snow and ice melting tees made of HDPE.


1033648 Uponor tee 75 1 pcs



Uponor supply pipes elbows

Uponor snow and ice melting elbows made of HDPE.


1033652 Uponor elbow 75 x 90° 1 pcs



Uponor supply pipes reducer

Uponor snow and ice melting reducer made of HDPE.


1033656 Uponor reducer 110 - 75 1 pcs

1033657 Uponor reducer 160 - 110 1 pcs

EEI-INT-SA-03.11 17



Uponor supply pipes end cap

Uponor snow and ice melting end cap made of HDPE.


1033659 Uponor end cap 75 1 pcs



Uponor flange support

Uponor snow and ice melting fl ange support for connection of Uponor fl ange to supply/return pipes. Made of HDPE.


1033662 Uponor fl ange support 75 1 pcs



Uponor flange

Uponor snow and ice melting fl ange made of HDPE.


1033666 Uponor fl ange 75x6.8 mm 1 pcs



Uponor electrofusion fitting

Uponor snow and ice melting electrofusion fi ttings made of HDPE.


1033673 Uponor electrofusion fi ttingfor pipe 75x6.8 mm 1 pcs



EEI-INT-SA-03.1118



ra

d

l b

h





h

b


For fastening the Uponor clamp track 25

Item no. w [mm] h [mm] Description unit

1005291 36 50 Uponor fastening nail forindustrial fl oor heating clamp track 500 pcs

l

D

Uponor cable tie

For fastening Uponor pipes on reinforcement steel meshed.Made of polyamide.

Item no. w [mm] l [mm] Description unit

1005287 5 200 Uponor cable ties, length 200 mm 100 pcs

1005372 7 300 Uponor cable tie length 300 mm 100 pcs

Uponor tying wire

For fastening Uponor pipes on reinforcement steel meshes. Made of steel.250 pcs per bag.


1009222 Uponor tying wire, 150 x 1.25 250 pcs





EEI-INT-SA-03.11 19



Uponor conduit




Uponor snow and ice decoiler

Uponor snow and ice melting, pipe decoiler.


1033691 Uponor Meltaway decoilerfor 25 x 2,3 mm pipe 1 pcs

Uponor pipe uncoiler with pipe guide

For laying of all Uponor pipes up to dimension 25 mm. Suits different pipe coils with 300 mm and 600 mm internal diameter.


1035807 Uponor pipe uncoiler with pipe guide 1 pcs

EEI-INT-SA-03.1120



l

d

SWSW1

z

IG

l

d

SWSW1

z

AG

Uponor compression adapter

Compression adapter made of brass, for connection of Uponor PE-X pipes with ¾“ female thread.

Item no. d [mm] MT ["] FT ["] l [mm] A/F [mm] z [mm] Description unit

1005297 25 Rp ¾ 35 37/31 8 Uponor compression adapter 25x2.3-¾ FT 10 pcs

1005296 25 Rp 1 40 37/38 8 Uponor compression adapter 25x2.3-1“ FT 10 pcs

1005295 25 R ¾ 50 37/27 15 Uponor compression adapter 25x2.3-¾“MT 10 pcs

1005298 25 R 1 53 37/34 20 Uponor compression adapter 25x2.3-1“ MT 10 pcs

Uponor chamfering tool

For de-studding the Uponor snow and ice melting pipe.


1033689 Uponor Meltaway chamfering toolfor Uponor Meltaway 25 mm pipe 1 pcs

EEI-INT-SA-03.11 21

Uponor Special Applications Heating/Cooling > Uponor sport fl oor heating

EEI-INT-SA-03.1122

Uponor sports fl oor heating

Uponor radiant heating system for surface elastic fl oors. These fl oors are a synthesis of wood-en swing fl oors with elastic layer made of PVC or linoleum. The heating registers runs in pipe holders (Patent Uponor) directly under the blind fl oor.

The pipes are to be connected to distribute- /collector pipes.

Uponor sports fl oor heating systems are quick installed. First due to the fl exible and at the same time robust PE-Xa pipe material. Secondly due to the patented mounting principle for swing fl oor constructions.

Your advantages Sports fl oor heating systems offer high thermal comfort Provides mild radiant heat and an even temperature

distribution with low air speed Gives athletes and architectures all freedom, because the

system is invisible Takes all hygienic and physiologic requirements of sports

halls into consideration Energy saving due to operation with low heating water

temperatures

System components

Uponor pipe fixation

Systempipe / -Fittings

Uponor eval PE-Xa pipe in coils

Additional components Manifold / Cabinets

Uponor Q&E tichelmann manifold for sportsfloor UFH

Uponor pipe fixation double

sprung floors

Uponor pipe bend suport

Uponor conduit


Uponor sport fl oor PE-Xa pipes

Uponor eval PE-Xa Q&E pipe in coils

Pipes manufactured from peroxide cross-linked polyethylene (PE-Xa) using the Engel method, complying with e.g. EN ISO 15875 ”Plastics piping systems for hot and cold water installations - Cross-linked polyethylene”. Includes an ethylene vinyl alcohol (EVOH) oxygen barrier layer, complying with DIN 4726, to prevent corrosion of system components. This barrier has been specially developed to work together with Uponor Q&E fi tting technology. Classifi cation of service conditions (including typical fi eld of application): Application class 4 - Underfl oor heating and low temperature radiators, malfunction temperature 95 °C. Design pressure 6 bar. Application class 5 - high temperature radiators, malfunction temperature 95 °C. Design pressure 6 bar.

Item no. d [mm] s [mm] l [m] p [bar] Description unit

1023448 25 2.3 205 6 Uponor eval PE-Xa Q&E pipe 25x2.3coil lengths 205 m 205 m



Uponor sport fl oor PE-Xa Q&E fi ttings

Uponor Q&E PPSU coupling equal

Made of PPSU. Note: Uponor Q&E Ring must be ordered separately!

Item no. d [mm] p [bar] Description unit


Uponor Q&E brass connection with male thread

Made of DR brass. Male thread acc.to DIN EN 10226-1 for sealing in. Note: Uponor Q&E Ring must be ordered separately!

Item no. d [mm] MT ["] p [bar] Description unit


1023008 25 R1 6+10 Uponor Q&E connection with male threadtaper, 25-1 5 pcs

Uponor Q&E brass connection with female thread

Made of DR brass. Female thread acc. to DIN EN 10226-1. Note: Uponor Q&E Ring must be ordered separately!

Item no. d [mm] FT ["] p [bar] Description unit


1023013 25 Rp 1 6+10 Uponor Q&E connection with female thread25-1 5 pcs




1042840 25 natural 6+10 Uponor Q&E ring natural with stop edgefor Uponor PE-Xa dim 25 mm 20 pcs

EEI-INT-SA-03.11 23


Uponor sport fl oor fi xation and accessories

h

l1 sa ra

l

Uponor pipe fixation

For exact leading of pipes inside the channels of sport fl oor Material: Polyamid

Item no. l [mm] sd [mm] c/c [mm] l1 [mm] h [mm] Description unit

1005286 290 45 100 145 50 Uponor pipe clip trackfor fl oors in gyms. Polyamid 25 pcs

ra ra l1

l

Uponor pipe fixation double

For exact leading of pipes in the bending zone of chanels of sport fl oorMaterial: galvanised steel

Item no. l1 [mm] c/c [mm] l [mm] Description unit

1005284 105 100 975 Uponor double pipe clip track for fl oorsin gyms. galvanised steel 1 pcs

d

ra ra

l

Q&E tichelmann manifold for sportsfloor UFH

as manifold for the use in sportsfl oor UFH systems according to theTichelmann principle. For connection of Uponor PE-Xa pipes 25x2.3mmwith Uponor Q&E connection technology consisting of:- 1 manifold (distributor & collector)- 6 Q&E rings 25- 2 Q&E rings 40

Material: Uponor eval PE-Xa pipes + Uponor PPSU fi ttings

Item no. d [mm] l [mm] c/c [mm] Description unit

1046748 40 2084 150 Q&E tichelmann manifold for sportsfl oor UFH 1 set

EEI-INT-SA-03.1124


Uponor sport fl oor fi xation and accessories

d

ra ra

l Q&E tichelmann manifold end segment for sportsfloor UFH

as manifold for the use in sportsfl oor UFH systems according to theTichelmann principle. For connection of Uponor PE-Xa pipes 25x2.3mmwith Uponor Q&E connection technology consisting of:- 1 manifold (distributor & collector)- 6 Q&E rings 25

Material: Uponor eval PE-Xa pipes + Uponor PPSU fi ttings


1046749 Q&E tichelmann manifold end segmentfor sportsfl oor UFH 1 set





Uponor conduit




EEI-INT-SA-03.11 25

Uponor Special Applications Heating/Cooling > Uponor comfort panel

EEI-INT-SA-03.1126

Uponor Comfort Panel

Your advantages cooling power up to 92.5 W/m² with 10K under

temperature Heating power up to 82.5 W/m² with 15 K under

temperature Compatible with existing metal rail constructions easy to install quick installation concealed installation/integrated in the ceiling structure easily retrofi tted into existing ceiling structure excellent for both new buildings and refurbishment easy to operate maintenance-free.

System components

Uponor Comfort Panel


Uponor PE-X Pipe 10x1.5

Additional components

Uponor Dynamic volume flow controller

Manifold / Cabinets

Uponor Slip ConnectorUponor blind panel

Uponor connection MLC

Uponor connection with female threat

The Uponor comfort panel is a suspended ceiling system which can be used for heating and cooling. The system consist of thermally activated ceiling panels which can be installed fast and easy into conventional suspended ceiling grids.



b

l h

Uponor comfort panel 1250 x 625

For cooling and heating of buildings with suspended raster frame ceiling. For already existing or new raster frames under the ceiling. With optically sophisticated surface from fl eece coated steel sheet. High performance due to optimised thermal conductivity between surface and integrated pipes, made of PE-X, with thermal insulation made of mineral fi bres.Cooling capacity 60 W/m² by 8 K temperature difference complies withEN 14240Heating capacity 94 W/m² by 15 K temperature difference complies with EN 14037

Item no. l [mm] w [mm] h [mm] Description unit

1045315 1240 615 23 Uponor comfort panel 1250 x 625 1 pcs

b

l h


For cooling and heating of buildings with suspended raster frame ceiling. For already existing or new raster frames under the ceiling. With optically sophisticated surface from fl eece coated steel sheet. High performance due to optimised thermal conductivity between surface and integrated pipes, made of PE-X, with thermal insulation made of mineral fi bres.Cooling capacity 60 W/m² by 8 K temperature difference complies with EN 14240Heating capacity 94 W/m² by 15 K temperature difference complies with EN 14037


1045317 615 615 23 Uponor comfort panel 625 x 625 1 pcs

EEI-INT-SA-03.11 27



b

l h



Item no. l [mm] w [mm] h [mm] A [m²] Description unit

1045316 1190 590 23 0.70 Uponor comfort panel 1200 x 600 1 pcs

b

l h




1045318 590 590 23 0.35 Uponor comfort panel 600 x 600 1 pcs

Uponor comfort panel - fi ttings

l

d

Uponor slip-connector 10 mm

Push-in fi tting for connection of more comfort panels together into one control circuit or to one ceiling panel area.Medium: heating/cooling water acc. to VDI 2035 or water-glycol up to 50%Temperature range: 0 to 60 °CPressure range: 0 to 6 bar by max. 65 °CSurrounding humidity: up to 90%Material: plastic

Item no. l [mm] d [mm] Description unit

1045325 45 22 Uponor slip-connector equal 10 mm 100 pcs

EEI-INT-SA-03.1128



l

d3 d2d1

Uponor slip-connector reduced 15-10 mm

Push-in fi tting for connection of more comfort panels together into one control circuit or to one ceiling panel area.Medium: heating/cooling water acc. to VDI 2035 or water-glycol up to 50%Temperature range: 0 to 60 °CPressure range: 0 to 6 bar by max. 65 °CSurrounding humidity: up to 90%Material: plastic

Item no. l [mm] d1 [mm] d2 [mm] d3 [mm] Description unit

1045326 56 32 10 15 Uponor slip-connector reduced 15-10 mm 100 pcs

l

d d1

Uponor connection MLC

For connection of 15 mm push-in system to Uponor MLC pipe.Material: nickel-plated brass, press sleeve

Item no. d [mm] d1 [mm] l [mm] Description unit

1000297 15 16x2.0 70 Uponor connectionto MLCP 15-16x2 6 pcs

1000298 15 20x2.25 70 Uponor connectionto MLCP 15-20x2.25 6 pcs

d

l

AG

Uponor connection with male threat

for connection of 15 mm push-in system to male threat.Material: nickel-plated brass

Item no. d [mm] MT ["] l [mm] Description unit

1000299 15 R ½ 57 Uponor connectionwith male threat 15-½ MT 6 pcs

1000300 15 R ¾ 57 Uponor connectionwith male threat 15-¾ MT 6 pcs

Uponor PE-X pipe 10 x 1,5 mm

As pipe in coils for connection or extension between 2 comfort panels.Material: Uponor PEX pipe from high pressure cross-linked polyethylene

Medium: heating/cooling water acc. to VDI 2035 or water-glycol up to 50%Temperature range: 0 to 60°CPressure range: 0 to 6 bar by max. 65 °C0 to 12 bar by max. 20 °CSurrounding humidity: up to 90%Material: plastic

Item no. d [mm] s [mm] l [m] Description unit

1045327 10 1.5 100 Uponor PE-X pipe 10 x 1,5 mm, in coilsbarrier, 10x1,5 coil 100m, 6bar 100 m

b

d

Uponor support sleeve, 10 x 1,5 mm PE-X

Pipe sleeve made of plastic, for plug in PE-X pipe ends, dimension 10 x 1,5 mm, for stiffening of a pipe in connection area with Uponor slip-connector.

Item no. w [mm] d [mm] Description unit

1045328 5 7 Uponor support sleeve, 10 x 1,5 mm 10 pcs

EEI-INT-SA-03.11 29



IG

l

Uponor ball valve

For closing of cooling and heating areas and supply pipes.Medium: heating/cooling water acc. to VDI 2035 or water-glycol up to 50%Temperature range: -10 to + 110 °CPressure range: 0 to 10 barSurrounding humidity: up to 95%Material: nickel-plated brass

Item no. l [mm] FT ["] Description unit

1022985 50 G 1 Uponor ball valvedimension 1 FT - 1 FT 1 pcs

1022986 50 G ¾ Uponor ball valvedimension ¾ FT - ¾ FT 1 pcs

Uponor reduction

Reducer from ¾ MT to ½ FT by use of tees for supply and return MLC pipes from dimension 40 x 4 mmMaterial: brass

Item no. FT ["] MT ["] Description unit

1022988 Rp ½ G ¾ Uponor reductiondimension ½ FT - ¾ MT 10 pcs

Uponor comfort panel - accessories

R R

Dynamic volume flow controller

For hydraulic control of heating and cooling loops, or zones and indvidual control over integrated valve insert in combination with thermla actuator.

Item no. DN [mm] [l/h] [mm] [-] Description unit

1042942 15 90-450 2.25 G ¾“ A Dynamic volume fl ow controllerAB-QM DN 15, fl ow rate 55 - 275 L/H 1 pcs

1042943 20 180-900 2.25 G 1“ A Dynamic volume fl ow controllerAB-QM DN 20, fl ow rate 180 - 900 L/H 1 pcs

1042944 25 340-17002.25 G 1 ¼“ A Dynamic volume fl ow controllerAB-QM DN 25, fl ow rate 340 - 1700L/H 1 pcs

1042945 32 640-32002.25 G 1 ½“ A Dynamic volume fl ow controllerAB-QM DN 32, fl ow rate 640 - 3200L/H 1 pcs

Thermal actuator TWA -Z NO

For control of pressure indipendent volume fl ow controller - openes when idle.

Item no. Type [-] [-] Description unit

1042946 TWA-Z NO Thermal actuator TWA -Z NO 1 pcs

EEI-INT-SA-03.1130



Thermal actuator TWA -Z NC

For control of pressure indipendent volume fl ow controller - closes when idle.

Item no. Type [-] [-] Description unit

1042947 TWA-Z NC Thermal actuator TWA -Z NC 1 pcs

b

l h

Uponor blind panel 625 x 625

For use in on-site installed suspended raster ceilings. With optically sophisticated surface from fl eece coated mineral faser board, optically fi ts exactly to comfort panel.Colour from below: whiteAcoustical absorption (alpha w): 1,00Acoustical absorption (NRC): 0,95Building material class according to DIN 4102: A1


1045319 615 615 20 Uponor Blind Panel 625 x 625 32 pcs

b

l h

Uponor blind panel 600 x 600

For use in on-site installed suspended raster ceilings. With optically sophisticated surface from fl eece coated mineral faser board, optically fi ts exactly to comfort panel.Colour from below: whiteAcoustical absorption (alpha w): 1,00Acoustical absorption (NRC): 0,95Building material class according to DIN 4102: A1


1045320 590 590 20 0.36 Uponor Blind Panel 600 x 600 32 pcs

EEI-INT-SA-03.11 31



b

l h

Uponor blind panel

For use in on-site installed suspended raster ceilings. With optically sophisticated surface from fl eece coated mineral faser board, optically fi ts exactly to comfort panel.Colour from below: whiteAcoustical absorption (alpha w): 1,00Acoustical absorption (NRC): 0,95Building material class according to DIN 4102: B1

Item no. l [mm] w [mm] h [mm] A [m²] Weight [kg] Description unit

1022983 1242 617 18 2.08 Uponor Blind Panel 625dimension 617 x 1242 x 18 16 pcs

1022984 1195 595 18 0.71 1.93 Uponor Blind Panel 600dimension 595 x 1195 x 18 16 pcs

l

b Uponor blind frame

For use in existing suspended ceiling constructions for optical devision into a quadratic raster.

Item no. l [mm] w [mm] colour [-] Description unit

1045323 625 24 white Uponor blind frame 625, white 1 pcs

1045324 600 24 white Uponor blind frame 600, white 1 pcs

Rp R

Screw connection for AB-QM ¾ MT

Screw connection Inclusively fl at sealing

Item no. Type [-] FT ["] MT ["] Description unit

1044809 15 Rp ¾“ R ½“ Screw connection for AB-QM ¾ MT 1 pcs

1044810 20 Rp 1“ R ¾“ Screw connection for AB-QM 1 MT 1 pcs

1044811 25 Rp 1 ¼“ R 1“ Screw connection for AB-QM 1 ¼ MT 1 pcs

1044812 32 Rp 1 ½“ R 1 ¼“ Screw connection for AB-QM 1 ½ MT 1 pcs

EEI-INT-SA-03.1132

Uponor Special Applications Heating/Cooling > Uponor gypsum panel

EEI-INT-SA-03.11 33

Uponor Gypsum Panel is the ideal system for heating and cooling. The moderate temper-ature of the water feeds the radiant system makes it partic-ularly suitable to be combined with condensing boilers, heat pumps, solar panels and other

alternative sources of energy.

Your advantages quick and easy to install for new buildings and renovation high comfort fast response time completely silent (no fan noise).

System components

Uponor Gypsum Panel


Uponor PE-Xa pipe 9,9 x 1,1

Additional components

Uponor PE-Xa pipe20x2

Manifold / Cabinets

Uponor compression Adapter

Uponor PE-Xa Q&E Coupling

Uponor PE-Xa Q&E teereducer 20x9.9x20

Uponor PE-Xa Pipe 9.9x1.1 expander

Uponor PE-Xa Q&E jointing reducer 20x9.9

Uponor Gypsum Panel

Uponor Gypsum panel passive

velta PE-Xa


Uponor gypsum panel

Uponor gypsum panel

Radiant panel for heating and cooling applications. Consisting of a gypsum board (15mm), Uponor eval PE-Xa pipe 9.9x1.1 mm and 17mm of EPS 200 (30 kg/m³). Uponor gypsum passive panel has the same layout as the active panels but consists no pipes.

Sizes: 2000x1200mm, 1000x1200mm, 500x1200mm.

Item no. h [mm] l [mm] w [mm] A [m²] Description unit

1047319 42 2000 1200 2.40 Uponor gypsum panel 2000x1200 Type 2 1 pcs



Uponor gypsum panel passive

Uponor gypsum panel passive has the same layout as the active gypsum panels (item no. 1047319-21) but contains no pipes.

Size: 2000x1200mm

Item no. h [mm] l [mm] w [mm] A [m²] Description unit

1020506 42 2000 1200 2.40 Uponor gypsum panel passive 2000x1200 1 pcs

Uponor gypsum panel - accessories

Uponor PE-Xa pipe

PE-Xa pipe with an oxygen diffusion barrier manufactured from peroxide cross-linked polyethylene (PE-Xa) using the Engel method complying with e.g. EN ISO 15875 “Plastics piping systems for hot and cold water installations - Cross-linked polyethylene” with an oxygen diffusion barrier of EVOH (ethyl vinyl alcohol). Uponor pipes fulfi l the requirements for oxygen diffusion resistance as per DIN 4726. Malfunction temperature 95°C. Design pressure 8,8 bar (at 70°C).

Item no. d [mm] s [mm] l [m] V [l/m] Description unit



SW

18

5

d

IG

Uponor compression adapter

Compression adapter made of brass, for connection of Uponor PE-Xa pipes to manifolds. Female thread ¾““ eurocone acc. to DIN EN ISO 228-1.Material: Brass

Item no. d [mm] FT ["] A/F [mm] Description unit

1057370 20 G ¾ 30 Uponor PE-Xa compression adapter witheurocone, 20x1.9/2.0x¾ FT 10 pcs

EEI-INT-SA-03.1134



d

l

z

Uponor PE-Xa Q&E coupling 9.9

For Uponor PE-Xa pipe 9.9 x 1.1 mm, consisting of:- 1 coupling- 2 PEX Q&E rings for secure connectionMaterial: Coupling made in brass; PEX Q&E rings made in high-pressure cross-linked polyethylene

Item no. d [mm] l [mm] z [mm] Description unit

1005264 9.9 34 4 Uponor PE-Xa Q&E coupling 9.9-9.9with two PEX rings 10 pcs

l

z

d

SW

AG

Uponor PE-Xa conversion nipple

For Uponor PE-Xa pipes 9.9 x 1.1 mm, made of brass.

Item no. d [mm] MT ["] l [mm] z [mm] A/F [mm] Description unit

1005265 9.9 R ½ 39 14 22 Uponor PE-Xa conversion nipple9.9 - ½ with one PEX ring 10 pcs

Uponor PE-Xa Q&E jointing reducer 20x9.9

For connection of Uponor PE-Xa pipes, made of brass.

Item no. d [mm] d1 [mm] Description unit

1020518 9.9 20 Uponor PE-Xa Q&E jointing reducer 20 x 9.9incl. 1 PEX ring 9.9 and 1 PEX ring 20 5 pcs

Uponor PE-Xa Q&E tee reducer 20x9.9x20

For connection of Uponor PE-Xa pipes, made of brass.

Item no. d [mm] d1 [mm] d2 [mm] Description unit

1020524 20 9.9 20 Uponor PE-Xa Q&E tee reducer 20 X 9.9 X 9.9incl. 1 PEX ring 9.9 and 2 PEX rings 20 5 pcs

Uponor PE-X ring for PE-Xa pipes

For Uponor Minitec PE-Xa pipe 9.9 x 1.1 mm; for secure fi xture to Minitec fi ttingsMaterial: High-pressure cross-linked polyethylene (PE-Xa)


1005263 9.9 Uponor PE-X ring for PE-Xa pipes9.9 x 1.1 10 pcs

EEI-INT-SA-03.11 35






1042836 20 natural 6+10 Uponor Q&E ring natural forUponor PE-Xa dim 20 mm 20 pcs

EEI-INT-SA-03.1136

Uponor Special Applications Heating/Cooling > Uponor controls

Uponor room control

l

l1

h

Uponor room temperature controller H/C

Concealed device, protects cooling surface from condensation. The TR 2/3 (concealed device) can both to control one valve (heating or cooling) and also be switched over internally to control thus 2 valves (heating and cooling). With an option of external setpoint remove access will it be introduced in two-line (heating and cooling) and three-line systems (heating and cooling). The actual operation status (heating/cooling/dew point warning) will be show on device by means of light diods. For simplifi cation of wiring and installation of room temperature are switch boxes shall be provided.Operational voltage: 24 V / 50-60 HzControl range: 5-30 °CSwitching hysteresis: 1 KTemperature sensor: NTCSwitch outlet: Triac, 24 V/1 A, short-term up to 2,5 AFunctions:Heating or coolingHeating or cooling with switchoverHeating and/or cooling with setpoint remot accessInstallation site: concealed under plaster, fi ts into UP-Doses acc. to DIN 49073Installation depth: 28 mmColour: RAL 9010, pure white

Item no. l [mm] l1 [mm] h [mm] Description unit

1000311 71 70 28 Uponor room thermostatTR 2/3 1 pcs

Uponor dew point sensor

For plastered ceilings or walls / pipe installation, detects a potential condensation arising on the pipe or in the immediate vicinity by changing its electrical resistance. This change of resistance in the sensor is detected by room thermostat TR 2/3, which closes control valve and effectively protects the cooling surface from condense damage. The dew point sensor TF 3 PR is designed for installation in plastered ceilings (P) and for cold-water pipe conduits (R).Installation site: plastered ceilings/walls or pipe installations


1000312 70 20 7 Uponor dew point sensorTF 3 PR 1 pcs

Uponor dew point sensor

For gypsum plasterboard ceilings / suspended metal ceilings, detects a potential condensation arising on the pipe or in the immediate vicinity by changing its electrical resistance. This change of resistance in the sensor is detected by room thermostat TR2/3, which closes control valve and effectively protects the cooling surface from condense damage.The dew point sensor TF 3 GM is designed for installation in gypsum plasterboard ceilings/walls (G) and for suspended metal ceilings (M).Installation site: gypsum plasterboard ceilings/walls or suspended metal ceiling


1000313 70 20 7 Uponor dew point sensorTF 3 GM 1 pcs

EEI-INT-SA-03.11 37


Uponor room control

l

b h Uponor dew point converter

Evaluates the information received from the corresponding dew point sensor. The integrated contact is activated when the dew point is reached. This information can be used, for example, for remote communications with an onsite central building control system or similar device. Up to fi ve dew point sensors can be assigned to each converter.Operating voltage: 24 V / 50-60 HzSwitch outlet: potential free switch over contact max. load capacity of the outlet: 48 V~/60 V DCInstallation site: automation cabinet or electric manifold installation


1000314 85 36 60 Uponor dew-point converterTK 1 PF 1 pcs

Uponor controller

Uponor climate controller C-46

Weather compensator controlling supply water in heating.Can be integrated in the C-56 system via bus connection.Consisting of:- Climate Controller C-46- Wired Outdoor sensor- Wired Supply sensor

Options:- Antenna Module for connection to wireless Thermostats- Wired Indoor sensor- Wired Return sensor.

General functions- Installation wizard gives easy and fast installation & set-up- Quick menu system gives easy access to basic settings- Integration with C-56 system via bus gives CC access to zone data from C-56.- System information, H/C-state, ECO-mode etc are also shared on the bus.- Automatic summer/wintertime change- ECO/Comfort timer in CC if no I-76 in the system.- Clock backup 8 hours- Alarm at disturbance- Pumpmanagement with internal fuse- Supports 24V Thermal Actuator or 0-10V controlled rotating mixer motor, or variable speed pump- General purpose input for Heating+Cooling switch or Snow detection- General purpose output for Heating+Cooling command or Dehumidifi cation command or Error signalling- Input indoor sensor- Input outdoor sensor- Input Supply Sensor- Input Return SensorAccessoriesOutdoor sensor (5m cable), Supply sensor (4m cable), mounting material


1047844 174 106 80 Uponor climate controller C-46 1 pcs

EEI-INT-SA-03.1138


Uponor controller

Uponor climate controller C-46 extended

Weather compensator controlling supply water in heating + coolingCan be integrated in the C-56 system via bus connection.

Consisting of:- Climate Controller C-46- Antenna- Wireless Humidity Sensor H-56- Wired Outdoor sensor- Wired Supply sensor

Options:- Wired Indoor sensor- Wired Return sensor- Additional 5 RH-sensors

General functions- Installation wizard gives easy and fast installation & set-up- Quick menu system gives easy access to basic settings- Integration with C-56 system via bus gives CC access to zone data from C-56.- System information, H/C-state, ECO-mode etc are also shared on the bus.- Automatic summer/wintertime change- ECO/Comfort timer in CC if no I-76 in the system.- Clock backup 8 hours- Alarm at disturbance- Pumpmanagement with internal fuse- Supports 24V Thermal Actuator or 0-10V controlled rotating mixer motor, or variable speed pump- General purpose input for Heating+Cooling switch or Snow detection- General purpose output for Heating+Cooling command or Dehumidifi cation command or Error signalling- Input indoor sensor- Input outdoor sensor- Input supply sensor- Input return sensor

Humidity Sensor H-56:- Wireless RH sensor with battery alarm- incl Batteries and mounting kit- Connects to C-46 with antenna or via C-56

AccessoriesOutdoor sensor (5m cable), Supply sensor (4m cable), mounting material , 3m Antenna cable


1047845 174 106 80 Uponor climate controller C-46 extended 1 pcs

Uponor humidity sensor H-56

- Wireless RH sensor with battery alarm- incl Batteries and mounting kit- Connects to C-46 with antenna or via C-56


1047846 72 72 21 Uponor humidity sensor H-56 1 pcs

EEI-INT-SA-03.11 39


Uponor controller

Uponor supply or return sensor for C-46

- For connection directly to C-46- Sensor with 4m wire.Note: Return sensor only needed for average temperature control


1047847 Uponor supply or return sensor for C-46 1 pcs

Uponor outdoor or indoor sensor for C-46

- For connection directly to C-46- Additional connection wire needed.


1047848 Uponor outdoor or indoor sensor 1 pcs

Uponor relay H/C, 24 V

For automatic heating/cooling switchover on external signal.

Item no. OV [V] l [mm] w [mm] h [mm] Description unit

1000516 24 160 50 95 Uponor relay H/C24 V 1 pcs

1000517 230 160 50 95 Uponor relay H/C230 V 1 pcs

Uponor KNX media coupler R-76

can connected the C-56 Radio to a standard KNX bus. This device will act as a interface between the C-56 Radio and the KNX wired bus.

Conformity: CEProtection Class: IP 30


1045571 203 75 26.5 KNX Media CouplerR-76 1 pcs

Uponor Mixer Motor 24V

For mounting on a mixing valve and used in combination with the C-46. Including a 24V thermal actuator. Signal ranges from 0-10V. Externally powerd.


1002356 Uponor Mixer motor 24Vwith 0-10V signal 1 pcs

Uponor Wall Power Supply

230V/24V Power supply with Euro-plug for 0-10V controlled mixer motor.


1048763 Uponor Power supply 230V/24Vfor C-46 mixer motor 1 pcs

EEI-INT-SA-03.1140


Uponor control accessories

AG

d 1 m

24 V

h

Uponor actuator 24V

24 V, with open/closed indicator, suitable for use with Uponor plastic manifolds in connection with Uponor radio or wired control system. Closes when idle. With all-round shower protection (IP 54). Suitable for operation at ambient temperature of up to 60°C. Threaded connector M 30 x 1.5 mm MT.Height: 54 mm.

Item no. MT [-] d [mm] h [mm] OV [V] P [W] Description unit

1000138 30x1.5 40 54 24 < 2 Uponor actuator 24V for plasticmanifold, 30 x 1,5 MT 1 pcs

AG

IG

IG

l z

SW

h1

h1

l z

90

Uponor plastic manifold connection valve kit

For the hydraulic balancing and shut-off of the Uponor plastic manifold, consisting of:- G 1/Rp 1 inlet control valve for the hydraulic balancing and independent shutt-off of the manifold, including hand wheel and display for settings/closingkvs value: 5.4 m³/h

- G 1/Rp 1 return valve for the shut-off of the manifold, including hand wheel and display for closing; adaptable for Uponor plastic manifold actuators.kvs value: 6.4 m³/hIn conjunction with Uponor plastic manifold actuators, the kvs value is 4.8 m³/h.

The connecting valve can be used to control individual zones.

Material: Housing made in brass, hand wheels made in polyamideMax. testy pressure: 10 bar (water)

Item no. l [mm] h1 [mm] z [mm] MT ["] FT ["] A/F [mm] Description unit

1005100 80 50 45 G 1 Rp 1 38 Uponor plastic manifold connection valveG-1/Rp 1 1 set

EEI-INT-SA-03.11 41

Uponor Special Applications Heating/Cooling > Uponor tools and accessories

Uponor tools - pipe cutters

Uponor pipe cutter up to 25 mm

For Uponor pipes, outside diameter up to 25 mm.


1001369 - 25 Uponor pipe cutter for PEX14-25mm 1 pcs

Uponor PE-Xa Q&E expander tools/accessories

Uponor PE-Xa pipe 9.9x1.1 expander

Hand tool for the easy expansion of Uponor PE-Xa pipes 9.9 x 1.1 mm, consisting of:- 1 hand expander- 1 expander head for PE-Xa pipe 9.9 x 1.1 mm- 1 tube of lubricant- 1 case


1006247 Uponor PE-Xa pipe 9.9 x 1.1 expandertool 1 set

Uponor Q&E manual expander tool set

Complete set in plastic box: pliers, tube of grease (colloidal graphite paste), fi tting instructions, and expander heads (see description).


1004064 16/20/25 Uponor Q&E manual tool set16/20/25 PEX + Eval 1 pcs

Uponor Q&E battery tool set Li-ion

Battery powered expander tool up to 40mm in plastic carrying case. Tube of 100 ml grease (Molykote G-n plus). Charger 230 V. Two Power-Accu (Li-ion battery).Operating manual. Without expander heads. Weight 7,7 kg.

Item no. OV [V] Description unit

1046740 14.4 Uponor Q&E ProPEX battery tool set Li-ionup to dim 40 mm 1 set

EEI-INT-SA-03.1142

Uponor Special Applications Heating/Cooling > Uponor tools and accessories

Uponor PE-Xa Q&E expander tools/accessories

Uponor Q&E charger Li-ion

230 V AC 50 Hz/16,5 V, 4A, 100W, CE-plug

Item no. OV [V] Description unit

1046739 230 Uponor Q&E ProPEX battery charger Li-ionfor item #1046740 1 pcs

Uponor Q&E rechargeable battery Li-ion

14,4 V, 2,4 Ah


1046738 Uponor Q&E ProPEX battery Li-ionfor item #1046740 1 pcs

Uponor Q&E heads

For use with Q&E hand and battery-powered expanderApplication class: 2+5 / 6 bar

Item no. d [mm] s [mm] Description unit

1006250 9.9 1.1 Uponor head 9.9 1 pcs

Uponor Q&E heads S 5.0

Q&E head for S5.0 pipes and S5.0 fi ttings.All heads without marking „H“ in the description are designed for the use with the manual and battery tool.All heads with „H“ marking are designed for the use with the battery and hydraulic tool.

Item no. d [mm] s [mm] Type [-] Description unit

1001373 20 2.0 20x2 Uponor head 20-2.0 1 pcs

1001374 25 2.3 25x2.3 Uponor head 25-2.3 1 pcs

1004030 20 2.0 H 20x2.0/1.9 Uponor head H20-2.0 1 pcs

1001376 25 2.3 H 25x2.3 Uponor head H25-2.3 1 pcs

Uponor Q&E head graphite paste

Colloidal graphite paste. For Uponor Q&E Tools.


1008334 Uponor graphite paste for Uponor plierscolloidal graphite paste, 30 g/tube 20 pcs

Uponor Q&E revolving adaptor 16-32mm

for autorotation of the Uponor Q&E heads. Fits to the Uponor Q&E manual expander tool as well as for the Uponor Q&E battery tool.


1038188 Uponor Q&E revolving adaptor 16-32 mm 1 pcs

EEI-INT-SA-03.11 43

Uponor Special Applications Heating/Cooling > International sales and delivery terms

International sales and delivery terms

EEI-INT-SA-03.1144

1 Interpretation

2 Basis of the sale

3 Orders and specifications

4 Price of Goods

5 Terms of payment

6 Delivery and Performance

Uponor Special Applications Heating/Cooling > International sales and delivery terms

International sales and delivery terms

EEI-INT-SA-03.11 45

7 Risk and property

8 Liability

9 Insolvency of Buyer

10 Packing

11 General

Uponor Special Applications Heating/Cooling > Item search register

Item search register

EEI-INT-SA-03.1146

Item no. unit Page

1000138 pcs 41

1000297 pcs 29

1000298 pcs 29

1000299 pcs 29

1000300 pcs 29

1000311 pcs 37

1000312 pcs 37

1000313 pcs 37

1000314 pcs 38

1000516 pcs 40

1000517 pcs 40

1001212 m 12, 20, 25

1001369 pcs 42

1001373 pcs 43

1001374 pcs 43

1001376 pcs 43

1002356 pcs 40

1004030 pcs 43

1004064 pcs 42

1005100 set 41

1005263 pcs 35

1005264 pcs 35

1005265 pcs 35

1005284 pcs 24

1005286 pcs 24

1005287 pcs 12, 19

1005289 pcs 12

1005290 m 11, 19

1005291 pcs 11, 19

1005295 pcs 21

1005296 pcs 21

1005297 pcs 21

1005298 pcs 21

1005358 m 11

1005372 pcs 12, 19

1006247 set 42

1006250 pcs 43

1008334 pcs 43

1008671 pcs 10, 23

1008932 pcs 10

1009006 pcs 12, 19, 25

1009222 pcs 12, 19

1009230 m 10, 34

1009231 m 10, 34

1009233 pcs 12

1020506 pcs 34

1020518 pcs 35

1020524 pcs 35

1022341 m 16

1022983 pcs 32

1022984 pcs 32

1022985 pcs 30

1022986 pcs 30

1022988 pcs 30

1023006 pcs 10

Item no. unit Page

1023007 pcs 10, 23

1023008 pcs 10, 23

1023011 pcs 11

1023012 pcs 11, 23

1023013 pcs 11, 23

1023448 m 10, 23

1030134 pcs 14

1030135 set 14

1033625 m 16

1033626 m 16

1033628 m 17

1033629 m 17

1033630 m 17

1033631 pcs 16

1033632 pcs 16

1033633 pcs 16

1033634 pcs 16

1033635 pcs 16

1033636 pcs 16

1033637 pcs 16

1033638 pcs 16

1033639 pcs 16

1033640 pcs 16

1033641 pcs 16

1033642 pcs 16

1033643 pcs 16

1033644 pcs 16

1033645 pcs 16

1033646 pcs 16

1033647 pcs 16

1033648 pcs 17

1033649 pcs 17

1033650 pcs 17

1033652 pcs 17

1033653 pcs 17

1033654 pcs 17

1033656 pcs 17

1033657 pcs 17

1033659 pcs 18

1033660 pcs 18

1033661 pcs 18

1033662 pcs 18

1033663 pcs 18

1033664 pcs 18

1033666 pcs 18

1033667 pcs 18

1033668 pcs 18

1033672 pcs 17

1033673 pcs 18

1033675 pcs 18

1033676 pcs 18

1033678 pcs 17

1033689 pcs 21

1033691 pcs 20

1035807 pcs 20

Item no. unit Page

1038188 pcs 43

1042836 pcs 11, 36

1042840 pcs 11, 23

1042942 pcs 30

1042943 pcs 30

1042944 pcs 30

1042945 pcs 30

1042946 pcs 30

1042947 pcs 31

1044809 pcs 32

1044810 pcs 32

1044811 pcs 32

1044812 pcs 32

1045315 pcs 27

1045316 pcs 28

1045317 pcs 27

1045318 pcs 28

1045319 pcs 31

1045320 pcs 31

1045323 pcs 32

1045324 pcs 32

1045325 pcs 28

1045326 pcs 29

1045327 m 29

1045328 pcs 29

1045571 pcs 40

1045813 set 13

1045815 set 13

1045816 set 14

1046738 pcs 43

1046739 pcs 43

1046740 set 42

1046748 set 24

1046749 set 25

1047319 pcs 34

1047320 pcs 34

1047321 pcs 34

1047615 m 10, 23

1047618 m 10, 23

1047844 pcs 38

1047845 pcs 39

1047846 pcs 39

1047847 pcs 40

1047848 pcs 40

1048763 pcs 40

1057370 pcs 34

How to contact us

Customer Service Center T + 49 (0)9521-690-370

F +49 (0)9521-690-750

E [email protected]

Technical assistance T +49 (0)9521-690-739 or 834

F +49 (0)9521-690-750

E [email protected]

T +49 (0)9521-690-370

F +49 (0)9521-690-750

E [email protected]

We reserve the right to make technical amendments and carry out updates.

47

Uponor – partnering with professionals

Uponor is a leading supplier of plumbing and heating systems for the residential and commercial building markets across Europe and North America, and a market leader in municipal infrastructure pipe systems in the Nordic countries. Uponor's key applications include indoor climate and plumbing systems.

Uponor International Sales takes care of all business activities in the Balkans, Western, Central and East Asia, Africa and Latin America.

Uponor. Simply more.

04/2

011

– Su

bjec

t to

mod

ifi ca

tions

Uponor GmbHP.O. Box 164197433 HassfurtGermanyT +49-(0)9521 690 0F +49-(0)9521 690 750E [email protected] www.uponor.com/international

Documents

1046532 uponor product catalog is 2011