10.Coda-DA200.pdf

Embed Size (px)

Citation preview

  • 7/28/2019 10.Coda-DA200.pdf

    1/2

    CODA DA200MULTI SENSOR DIGITAL DATA ACQUISITION SYSTEM

    Equipment specifications cannot form any www.ashtead-technology.com

    part of a contract to supply equipment.

    GENERAL DESCRIPTION

    The CODA DA200 multi-sensor digital Data Acquisition system can ac cept input from any

    commercial sidescan sonar, sub-bottom profiler, and swathe bathymetry systems with

    simultaneous yet independent display, processing and interpretation.

    FEATURES & BENEFITS

    Independent, simultaneous window displays Choice of display including waterfall, horizontal scroll and 3D mesh Retains ac claimed DA100 look and feel for ease of use Cost-effec tive all-purpose tool Improved da ta visualisation and interpretation Faster, better results Reduced equipment requirements with easier mobilisation for a range of survey work Reduced operator requirements with minimal training

    TECHNICAL SPECIFICATIONS

    PHYSICAL Flight-cased industrial 19 chassis

    (21.5x22x15.5)Monitor Light C asing

    (19.5x23.5x21.5)

    HARDWARE Dedicated acquisition boardMultiple independent input/output

    High-spec Pentium PC, High resolution & Mouse

  • 7/28/2019 10.Coda-DA200.pdf

    2/2

    CODA DA200MULTI SENSOR DIGITAL DATA ACQUISITION SYSTEM

    Equipment specifications cannot form any www.ashtead-technology.com

    part of a contract to supply equipment.

    DATA STORAGE/RETRIEVAL Digital Storage: Shoc k mounted high speed

    DDS DAT (4mm) SCSI tape (Exabyte tape,HDD, Optical Disk optional) Shock mounted1 GB SCSI HDD

    Data Format: CODA, SEG-Y, SDEF, Q-MIPS

    CompatibleHard Copy: Continuous rea l-time output to

    various thermal recorders, Screen dump to disk

    or printer in EPS or TIFF format

    DATA INTERFACES Ana logue Input: 200 kHz throughout, fully

    independent triggers, Input signal range

    1.25 to 10VTriggering: Up to 4 fully independent triggers

    Master Trigger Output: Trigger period 33ms to

    65s TTL (user-specificable duty cycle)Slave Trigger Input: Trigger period minimum

    33ms TTL, nega tive/ positive edge triggered.

    Digital Input/Output: TCP/IP Ethernet link, or

    customer-specificed (e.g. SCSI, GPIB),RS-232, DMA compatible parallel

    Navigational Interface: RS-232 serial

    interface, da ta rate up to 9600 baud,user-configurable RS-232 data format, correc ted

    navigation input from floppy disk.

    SOFTWARE On-line Processing: Simultaneous, real-time,

    multiple sensor display windows, rea l-time, on-line c orrec tive processing including

    independent channel TVG and slant rangecorrec tion, Automatic seabed detection and

    display, user-selec table sound veloc ity for

    sub-bottom feature measurement, full colour

    image enhancement.

    Event tagging and Databasing: event tag and

    recall including fix mark, da tabase filemanagement system including load, save, delete

    and print.

    High Resolution Display: Multi-channel windowdisplays including horizontal and vertica l

    waterfall display and 3D mesh plot, 3 mode

    zoom, A-scan oscilloscope display, on-screenmeasurement and event marking.

    High Speed Tape Operating System: Randomdata access with intuitive controls, continuous

    recording with dua l tape system CODA, SEG-Y,

    SDEF, Q-MIPS compatible data formats.

    Acquistion: Navigation input and survey

    parameter QC, software-configurable ac quisition

    setup, time-sychronised navigation input, user-

    programmable nav. string input.