11 Coll Programm für Druck - tae.de · Group V Basestocks on the Rise – Unconventional Base Stocks for more Sustainable Lubrication

4

28 Jan 2020 Tuesday

Morning P-1

Session:

Opening and Plenary Session (1)

Chair: C. Wincierz Evonik Resource Efficiency GmbH, Germany

09:00 – 09:30 Werner Schollenberger CEO Technische Akademie Esslingen e.V., Germany Opening Christoph Bolay Lord Mayor City of Ostfildern, Germany Welcome Address

09:30 – 10:00 Lutz Lindemann FUCHS PETROLUB SE, Germany The Lubricants Industry in Light of the Macroeconomic Environment

10:00 – 10:30 Michael Duncan STLE-President, Daubert Chemical Company, USA Edward Salek Society of Tribologists and Lubrication Engineers, USA Emerging Issues and Trends in Tribology and Lubrication Engineering

10:30 – 11:00 Break – Exhibition

11:00 – 11:30 Arup Gangopadhyay, Prasad Dev Hanumalagutti Ford Motor Company, USA Driveline Fluid Opportunities for HEV/EV Vehicles

11:30 – 12:00 Jeff Hemphill Schaeffler Group North America, USA Impact of Tribology on Vehicle Electrification

12:00 – 12:30 Michael Carus nova-Institut GmbH, Germany Sustainability Analysis – from Brundtland to VDI


5

28 Jan 2020 Tuesday

Afternoon A-1

Session:

Base Oil Technology (1)

Chair: L. Lindemann Fuchs Petrolub SE, Germany

14:00 – 14:30 Thomas Norrby, Jinxia Li Nynas AB, Sweden Ultra-Low Viscosity Naphthenic Base Oils for Industrial Lubricants

14:30 – 15:00 Claire Ward Croda Europe Ltd, United Kingdom Liquid Amides – Novel, High Performance Base Oils

15:00 – 15:30 Frank Rittig, René Koschabek, Henrik Heinemann, Uwe Förster, Andreas Minke, Edith Tuzyna BASF SE, Germany Group V Basestocks on the Rise – Unconventional Base Stocks for more Sustainable Lubrication


6

28 Jan 2020 Tuesday

Afternoon A-2

Session:

Testing (1)

Chair:

A. Pauschitz AC2T research GmbH, Austria

14:00 – 14:30 Fabio Alemanno, Deepak Halenahally Veeregowda Ducom Instruments Europe B.V., The Netherlands How to Relate Lubricants Failure to its Behavior at Microscale

14:30 – 15:00 Bernardo Tormos, Vicente Macian, Antonio García-Barberá, Universitat Politecnica de Valencia, Spain Tomas Perez Repsol, Spain Long-Term Real World Test for Engine Oils: Performance, Engine Problems and Fuel Economy

15:00 – 15:30 Nicole Dörr, Adam Agocs, Andjelka Ristic, Serhiy Budnyk, Charlotte Besser, ,Marcella Frauscher AC2T research GmbH, Austria Impact of Engine Oil Degradation on Lubrication Performance Studied by the Lab-to-Field Approach


7

28 Jan 2020 Tuesday

Afternoon A-3

Session:

Additives (1)

Chair:

C. Wincierz Evonik Resource Efficiency GmbH, Germany

14:00 – 14:30 Siegfried Lucazeau NYCO, France High Performance Anti-Oxidants for Synthetic Esters

14:30 – 15:00 Jinxia Li Nynas AB, Sweden Thorsten Schoeppe, Marcel Harhausen BASF SE, Germany Anti-Oxidant Expression in Heavy Naphthenic Base Oils

15:00 – 15:30 Jerome Desire Aliebakaa Kpan Coburg University of Applied Sciences, Germany Jürgen Krahl Ostwestfalen-Lippe University of Applied Sciences and Arts, Germany Impact of Adsorbents on Oxidative Stability of Biodiesel and the Deterioration of Engine Oil


8

28 Jan 2020 Tuesday

Afternoon A-4

Session:

Greases (1)

Chair:

M. Fatih.Najafi Nynas AB, Sweden

14:00 – 14:30 Dirk Rettemeyer Idemitsu Lube Europe GmbH, Germany Nano Structure Urea Grease with New Performance Level

14:30 – 15:00 Kirsten Schwörer, Kristina Görmer BP Europa SE, Germany Jonathan Leather, David Di Nunzio Castrol Industrial North America, USA New Wind Turbine Bearing Grease Development

15:00 – 15:30 David Gonçalves INEGI, Portugal Jorge Seabra FEUP - Faculdade de Engenharia da Universidade do Porto, Portugal Armando V. Campos Instituto superior de engenharia do politécnico do Porto, Portugal Grease Influence on Constant Velocity Joint Performance


9

28 Jan 2020 Tuesday

Afternoon A-5

Session:

Seals

Chair:

N. Brunetière Institut Pprime - UPR 3346, France

14:00 – 14:30 Noël Brunetière Institut Pprime - UPR 3346, France Can we Predict the Behavior of Mechanical Seals?

14:30 – 15:00 Gert Wahl Schunk Kohlenstofftechnik GmbH, Germany Philipp Gingter, Sebastian Liebisch Schunk Ingenieurkeramik GmbH, Germany 3D-Printed Silicon Carbide Ceramics Open New Opportunities for the Design of Mechanical Seals

15:00 – 15:30 Christoph Burkhart, Kevin Peter, Stefan Thielen, Bernd Sauer TU Kaiserslautern, Germany Online Determination of Pumping Values of Radial Shaft Seals and their Tribological System


10

28 Jan 2020 Tuesday

Afternoon A-6

Session:

Sliding Bearings

Chair:

M. Gaule Hermann Bantleon GmbH, Germany

14:00 – 14:30 Florian König, Georg Jacobs, Christopher Sous RWTH Aachen University, Germany Emmanuel Georgiou, Dirk Drees FALEX Tribology, Belgium Suitability of Wear Coefficients from Tribometer Testing for Wear Prediction in Sliding Bearings

14:30 – 15:00 Christian Stelzer CADFEM GmbH, Germany Vincent Hoffmann Tribo Technologies GmbH, Magdeburg Dirk Bartel Otto-von-Guericke-Universität Magdeburg, Germany Designing a Heavily Loaded Journal Bearing by Usage of Multi-Parameter-Optimization

15:00 – 15:30 Shalem Indrupati, Achim Frick Hochschule Aalen, Germany A Study of Injection Molding Induced Tribological Behavior of Polyoxymethylene Copolymer


11

28 Jan 2020 Tuesday

Afternoon A-7

Session:

Molecular Dynamics

Chair:

M. Moseler Fraunhofer Institute for Mechanics of Materials (IWM), Freiburg, Germany

14:00 – 14:30 Takuya Kuwahara, Gianpietro Moras, Michael Moseler Fraunhofer Institute for Mechanics of Materials, Germany Atomistic Simulations of Tetrahedral Amorphous Carbon in Boundary Lubrication

14:30 – 15:00 Gianpietro Moras Fraunhofer IWM, Germany Surface Termination in Dry Friction: Atomic-Scale Insights from Computer Simulations

15:00 – 15:30 Stefan Eder AC2T research GmbH, Austria Ashlie Martini, Karen Mohammadtaba University of California, USA Nicole Dörr AC2T research GmbH Effects of Heat, Load and Shear on Film Formation Deconvoluted by Reactive Molecular Dynamics


12

28 Jan 2020 Tuesday

Afternoon A-8

Session:

Oil Analysis (1)

Chair:

R. Krethe Oelcheck GmbH, Germany

14:00 – 14:30 Thomas Fischer, Stefan Mitterer OELCHECK GmbH, Germany Monitoring of Nonferrous Metal Passivators – Proactive Copper Wear Detection in Wind Turbines – Part 1

14:30 – 15:00 Stefan Mitterer, Thomas Fischer OELCHECK GmbH, Germany Monitoring of Nonferrous Metal Passivators – Proactive Copper Wear Detection in Wind Turbines – Part 2

15:00 – 15:30 Lin Wang, David Holt, Derek Selby ExxonMobil, USA The Impacts of Solvent Dilution on Removing Antifoam Droplets for Automatic Particle Counting


13

28 Jan 2020 Tuesday

Afternoon B-1

Session:

Base Oils (2)

Chair:

M. Frauscher AC2T research GmbH, Austria

16:00 – 16:30 Martin Greaves Dow Europe GmbH, Switzerland Edward Daugs Dow Chemical Company, USA Ken Han Dow Chemical Company, China Ultra-Low Viscosity Polyalkylene Glycols for Transportation Lubricants

16:30 – 17:00 Dimitrios Karonis, Maria Papadopoulou, Maria Komiotou, George S. Dodos National Technical University of Athens, Greece Evaluation of Base Oils Production from Hydrocracker Residue with Solvent Refining

18:00 Come Together with Snacks and Beverages

14

28 Jan 2020 Tuesday

Afternoon B-2

Session:

Testing (2)

Chair:

A. Pauschitz AC2T research GmbH, Austria

16:00 – 16:30 Etienne Macron, Christophe Heau, Johnny Dufils IREIS -- Institut de Recherche En Ingénierie des Surfaces, France Multiscale Approach for Tribological Testing Supporting Automotive Components Development

16:30 – 17:00 Stephan Emmrich, Dirk Bartel Otto von Guericke University Magdeburg, Germany Marcel Plogmeyer Fraunhofer Institute for Surface Engineering and Thin Films, Germany Designing of a Thin-Film Transducer for Temperature Measurement in Mixed Lubrication

17:00 – 17:30 Oday I. Abdullah, Josef Schlattmann Hamburg University of Technology Hazim U. Jamali, Amjad Al-Hamood University of Kerbala, Iraq Adolfo Senatore University of Salerno, Italy Elastohydrodynamic Lubrication Analysis of a Modified Cam with Fat Faced Follower

17:30 – 18:00 Peter Kollegger Engineering Office for Mechanical Engineering and Technical Geology, Austria Test Design Based on Comprehensive Cause and Effects Matrix Analysis


15

28 Jan 2020 Tuesday

Afternoon B-3

Session:

Additives (2)

Chair:

N. Dörr AC2T research GmbH, Austria

16:00 – 16:30 David Boudreau Vanderbilt Chemicals LLC, USA Hydroxylated Alkyl Phosphate Esters as Lubricant Additives

16:30 – 17:00 Benoît Thiébaut, Catherine Charrin, Nemanja Drazevicanin TOTAL MS, France Molybdenum Based Friction Modifier: Improving Tribochemical Process to Optimize Fuel Economy

17:00 – 17:30 Ted McClure Sea-Land Chemical Company, USA Metalworking Lubricant Additive Response Comparisons on Aluminum Alloys Using Twist Compression (TCT) and Tapping Torque Tests


16

28 Jan 2020 Tuesday

Afternoon B-4

Session:

Greases (2)

Chair:

M. Matzke Robert Bosch GmbH, Germany

16:00 – 16:30 Igor Mass, Andreas Hoppermann Hochschule Niederrhein, Germany Hubertus Murrenhoff RWTH Aachen Univeristy, Germany- Experimental Studies on the Fluid Flow of Greases in Hydrostatic Thrust Bearings

16:30 – 17:00 Guillaume Notheaux, Claire Felix SEQENS (ex PCAS), France Fully Customizable Calcium Sulfonate Greases for Optimum Perform

17:00 – 17:30 Paolo Falzoni Kinolt GmbH, Germany Simon Eiden, Klaus Lucka TEC4FUELS GmbH, Germany Development of a Grease-Hardening Test – Falzoni-Voigt-Test

17:30 – 18:00 Mehdi Fathi-Najafi, Jinxia Li Nynas AB, Sweden Ameneh Schneider Optimol Instruments Prüftechnik GmbH, Germany The Impact of Viscosity of Naphthenic Oils on Different Type of Greases


17

28 Jan 2020 Tuesday

Afternoon B-5

Session:

Materials

Chair:

C. Greiner Karlsruhe Institute for Technology (KIT), Germany

16:00 – 16:30 Aleks Vrcek, Tobias Hultqvist, Pär Marklund, Roland Larsson Luleå University of Technology, Sweden Tomas Johannesson Volvo Cars Corporation, Sweden Tribological Characterisation of Potential Crankshaft Bearing Steels for Roller Bearing Engine

16:30 – 17:00 Romain Montélimard HEF Groupe, France PVD Coatings on Sliding Finger Followers for Internal Combustion Engines

17:00 – 17:30 Deepak Kumar, Jayant Jain, Nitya Nand Gosvami Indian Institute of Technology, India Nano Scale Tribological Behavior of AZ91 Alloy under Dry and Lubricated Conditions

17:30 – 18:00 Prashant Mittal, Nitya Nand Gosvami Indian Institute of Technology, India In Situ Nanoscale Study on ADC12 in Lubricated Contacts Containing ZDDP and MoDTC


18

28 Jan 2020 Tuesday

Afternoon B-6

Session:

Friction and Wear

Chair:

J. Molter Kompetenzzentrum Tribologie, Germany

16:00 – 16:30 Robert Teichert, Matthias Kröger TU Bergakademie Freiberg, Germany Friction Coefficient Control by Active Viscosity Mixing

16:30 – 17:00 Enrico Gnecco, Jana Hennig, Alper Özogul Friedrich Schiller University Jena, Germany Pedro J. Martinez, Juan J. Mazo University of Zaragoza, Spain The Role of Elastic Instabilities in Early Stages of Plastic and Abrasive Wear

17:00 – 17:30 Chengwei Wen, Xianghui Meng Shanghai Jiao Tong University, China Measurement of Piston Assembly Friction with Wireless IMEP Method under Fired Conditions


19

28 Jan 2020 Tuesday

Afternoon B-7

Session:

Reliability / Lifetime

Chair:

J. Schöfer Robert Bosch GmbH, Germany

16:00 – 16:30 Jörg Schöfer Robert Bosch GmbH, Germany Design for Reliability – a Methodical Approach for Tribological Systems

16:30 – 17:00 Guillermo E. Morales-Espejel SKF Research and Technology Development, The Netherlands LaMCoS INSA de Lyon, France Tribological Performance of Hybrid Rolling Bearings

17:00 – 17:30 Michael Gleß Technische Akademie Esslingen e.V., Germany Reliability Prediction of Concentrated Electrical and Tribological Contacts, Considering Wear Mechanism and Acceleration Possibilities

17:30 – 18:00 Amir Kadiric, Pawel Rycerz, Benjamin Wainwright, Mao Ueda Imperial College London, United Kingdom Micropitting in Rolling-Sliding Contacts: Influencing Factors and Mechanisms of their Action


20

28 Jan 2020 Tuesday

Afternoon B-8

Session:

Condition Monitoring

Chair:

R. Krethe Oelcheck GmbH, Germany

16:00 – 16:30 Rüdiger Krethe. Thomas Fischer OilDoc GmbH, Germany A New Method for Oxidation Detection in Hydraulic and Lubricating Oils

16:30 – 17:00 John K. Duchowski, Valérie Diehl-Klein, Andrei Wenze HYDAC FluidCareCenter GmbH, Germany Oil Conductivity: An Early Indicator of Oil and Additive Degradation Processes

17:00 – 17:30 Ameneh Schneider, Alexander Waller Optimol Instruments Prüftechnik GmbH, Germany Extending Lubricant Condition Monitoring by Tribotesting Results

17:30 – 18:00 Knut Wantzen, Albert Albers IPEK – Institute of Product Engineering at Karlsruhe Institute of Technology (KIT) Method to Develop Condition Monitoring Systems Based on Acoustic Emission Measurement Technique


21

28 Jan 2020 Tuesday

Afternoon B-9

Session:

Gas Bearings (2)

Chair:

A. Vogt Robert Bosch GmbH, Germany

16:00 – 16:30 Federico Colombo, Luigi Lentini, Terenziano Raparelli, Andrea Trivella, Vladimir Viktorov Politecnico di Torino, Italy The Effect of the Supply Holes Disposition on the Performance of Aerostatic Pads

16:30 – 17:00 Yao Lu, Domeniek Reynaerts, Farid Al-Bender KU Leuven, Belgium Stabilization of Air-Bearing System with Tuned Mass Damper Inside the Shaft

17:00 – 17:30 Yao Lu, Marius Naaburs, Domeniek Reynaerts, Farid Al-Bender KU Leuven, Belgium Stabilization of Ultra-High-Speed Air Bearings with Shunted Piezoceramics

17:30 – 18:00 Yao Lu, Domeniek Reynaerts, Farid Al-Bender KU Leuven, Belgium Application of Magnetic Damper to the Stabilization of Air Bearings


22

29 Jan 2020 Wednesday

Morning Room 1 P-2

Session:

Plenary Session (2)

Chair:

A. Fatemi Robert Bosch GmbH, Germany

09:00 – 09:30 Philippe Vergne, Pauline Cusseau,, Laetitia Martinie, David Philippon, Nicolas Devaux, LaMCoS - CNRS - INSA Lyon, France Fanny Briand TOTAL, France Relationship between Film Forming Capability and Rheology of Lubricants with VI Improvers

09:30 – 10:00 Amir Kadiric Imperial College London, United Kingdom Rolling Contact Fatigue: Pits, Cracks and Spalls

10:00 – 10:30 Nicolas Argibay, Michael Chandross Sandia National Laboratories, USA New Insights Into Alloy Design for Tribological Applications


23


Morning C-1

Session:

Lubricants (1)

Chair:

M. Jungk MJ Tribology, Germany

11:00 – 11:30 Michael Blumenfeld EMRE, USA Sulfur Syndrome: Limiting Oil Drain Intervals in Wind Turbine Main Gearbox Lubricants

11:30 – 12:00 Faried Makansi RWTH Aachen University, Germany Johannes Sossenheimer, Lars Petruschke, Eberhard Abele Technische Universität Darmstadt, Germany Christoph Wincierz, Michael Alibert Evonik Resource Efficiency GmbH, Germany Influence Analysis of the Viscosity of Hydraulic Fluids on the Energy Consumption of Machine Tools

12:00 – 12:30 George S. Dodos Eldon's S.A., Greece Varnish Potential Analysis of Turbine Oils


24


Morning C-2

Session:

Engine Tribology (1)

Chair:

M. Fox University of Bradford, United Kingdom

11:00 – 11:30 Paula Ussa, Benoit Thiebaut, Frederic Jarnias, Romuald Botel, Catherine Charrin Total, France Lubricant Impact on the Friction Reduction of Improved Mechanical Parts

11:30 – 12:00 Bernardo Tormos, Raul Payri, Marcos Carreres, Carlos Moreno Universitat Politecnica de Valencia, Spain Beatriz Dominguez, María Dolores Cárdenas Repsol, ,Spain Experimental Study on the Impact of the Engine Oil Reactivity on LSPI

12:00 – 12:30 Eduardo Tomanik, Francisco Profito, University of Sao Paulo, Brazil Wieslaw Graboń Rzeszow University of Technology, Poland Effect of the Coated Bore Pores on the Piston Ring Tribology through Deterministic Simulation

12:30 – 14:00 Break – Exhibition and Poster Session

25


Morning C-3

Session:

Additives (3)

Chair:

M. Fies BASF SE, German

11:00 – 11:30 Christelle Chretien Solvay, USA, Introducing Polymeric Anti-Wear Technology for High-Performance Lubricants

11:30 – 12:00 Andrew Schwarz Infineum UK Ltd., United Kingdom Development of New Lubricant Additives

12:00 – 12:30 Mao Ueda, Amir Kadiric, Hugh Spikes Department of Mechanical Engineering, Imperial College London, United Kingdom On the Crystallinity and Durability of ZDDP Tribofilm


26


Morning C-4

Session:

Lubrication Fundamentals (1)

Chair:

J. Müllers Robert Bosch GmbH, Germany

11:00 – 11:30 Jonny Hansen, Marcus Björling, Roland Larsson Luleå University of Technology, Sweden Lubricant Film Formation in Rough EHL Contacts

11:30 – 12:00 Dennis Fischer, Georg Jacobs, Andreas Stratmann Institute for Machine Elements and Systems Engineering, Germany Effect of Thickener Type in Lubricating Greases on the Film Formation in EHD Contacts

12:00 – 12:30 Roland Larsson, Tobias Hultqvist, Jonny Hansen, Marcus Björling, Pär Marklund Luleå University of Technology, Sweden On the Effects of Two-Sided Roughness in Rolling-Sliding EHL Contacts


27


Morning C-5

Session:

Wear Mechanisms

Chair:

N. Espallargas Norwegian Univeristy of Science and Technology NTNU, Norway

11:00 – 11:30 Fernando López, Beatriz Fernandez-Diaz, Francesco Pagano, Ainara López, Bihotz Pinedo, Raquel Bayón IK4-TEKNIKER, Spain White Etching Crack in Wind Turbine Bearings: Main Drivers and Experimental Procedures

11:30 – 12:00 Monika Ratoi, Brian Mellor University of Southampton, United Kingdom Dr. Vlad Niste, Hiroyoshi Tanaka, Joichi Sugimura Kyushu University, Japan Lubricants for Prevention of Hydrogen Absorption in Steel

12:00 – 12:30 Jörg W.H. Franke, Jörg Loss, Wolfram Kruhöffer, Daniel Merk Schaeffler Technologies AG & Co. KG, Germany Influence of Oil Formulation on White Etching Crack Formation Depending on WEC Main Mechanism


28


Morning C-6

Session:

Rolling Element Bearings (1)

Chair:

G. Morales-Espejel SKF Research and Technology Development, The Netherlands LaMCoS INSA de Lyon, France

11:00 – 11:30 Tobias Hultqvist, Aleks Vrcek, Pär Marklund, Roland Larsson Luleå University of Technology, Sweden Tomas Johannesson Volvo Cars Corporation, Sweden Analysis of Split Crankshaft Roller Bearings with Focus on Lubrication and Contact Stresses

11:30 – 12:00 David Gonçalves INEGI, Portugal Jorge Seabra FEUP - Faculdade de Engenharia da Universidade do Porto, Portugal Armando V. Campos Instituto superior de engenharia do politécnico do Porto, Portugal Lubrication Regime and Friction in Rolling Contacts

12:00 – 12:30 Rahul Dahiwal, Bernd Sauer Technische Universität Kaiserslautern, Germany Lifetime Influence of Cage Wear during Transfer Lubrication of Solid-Lubricated Roller Bearings


29


Morning C-7

Session:

Sustainable Lubricants (1)

Chair:


11:00 – 11:30 Markus Matzke Robert Bosch GmbH, Germany Global Need for Sustainability – How Advanced Lubrication Can Contribute to a More Sustainable Future

11:30 – 12:00 Apu Gosalia UEIL, Belgium Sustainability Task Force European Lubricants Industry

12:00 – 12:30 Ivana Krkljus BASF SE, Germany Fact Based Sustainability for Lubricants: How to Assess the Portfolio and Products’ Environmental Impacts Based on a Case Study of Hydraulic Fluids


30


Morning C-8

Session:

Surface & Coatings (1)

Chair:

Z. Khan Bournemouth University, UK

11:00 – 11:30 Volker Weihnacht, Frank Kaulfuss, Falko Hofmann, Patrick Bergmann Fraunhofer IWS, Germany Superhard Carbon Coatings for Application in Low-Friction Gears

11:30 – 12:00 Javier Echávarri Otero, Enrique Chacón Tanarro, Guillermo Sanz Pascual, Íñigo Herrero de Zavala Technical University of Madrid, Spain Armando Salmerón Cano, Tomás Pérez Gutiérrez, Luis Fernández Ruiz-Morón, Beatriz Domínguez Jimeno Repsol Technology Lab, Spain Friction Behavior in Hydraulic Shock-Absorbers: the Influence of Diverse Fluids and DLC Coatings


31


Morning C-9

Session:

i-Tribomat

Chair:

I. Toth AC2T research GmbH, Austria

11:00 – 11:30 Franz Pirker, András Vernes, Ivana Tóth, Ulrike Cihak-Bayr AC2T research GmbH, Austria i-TRIBOMAT – Single-Entry Point (SEP) concept

11:30 – 12:00 Alberto Alberdi, Raquel Bayon, Amaya Igartua TEKNIKER, Spain An Industrial Driven Service Catalogue

12:00 – 12:30 Alvaro Garcia TEKNIKER, Spain Design of a Scalable and Interoperable Platform for Tribo-Connection


32


Afternoon D-1

Session:

Lubricants (2)

Chair:


14:00 – 14:30 Phil Hutchinson Evonik Resource Efficiency GmbH, Germany Correlating Viscosity to Fuel Efficiency in the Daimler OM501 Heavy-Duty Diesel Engine Fuel Efficiency Test and the Influence of VII

14:30 – 15:00 Deepak H. Veeregowda, Angela Tortora Ducom Instruments Europe B.V., The Netherlands A System Engineering Approach to Reduce Soot Wear

15:00 – 15:30 Ritwik Chakraborty, Syamal Kanti Chakrabarti Indian Jute Industries' Research Association, India Low Viscosity Friction Modifying Formulation for Jute Fibre Spinning


33


Afternoon D-2

Session:

Engine Tribology (2)

Chair:

E. Tomanik University of Sao Paulo, Brazil

14:00 – 14:30 Hyunjung Oh, Kyoungdoug Min,Kyoung-Pyo Ha Seoul National University, South Korea Development of New Piston Friction Measurement System

14:30 – 15:00 Malcolm Fox, Martin Priest University of Bradford, United Kingdom In-Bore Engine Component Tribology

15:00 – 15:30 Boris Zhmud Applied Nano Surfaces Sweden AB, Sweden Eduardo Tomanik University of Sao Paulo, Brazil Optimizing the Piston/Bore Tribology:The Role of Surface Specifications, Ring Pack and Lubricant


34


Afternoon D-3

Session:

Additives (4)

Chair:

S. Lucazeau NYCO, France

14:00 – 14:30 Matthias Fies BASF SE, Germany Non-Antagonistic Corrosion Inhibitors for Lubricant Applications

14:30 – 15:00 Jennifer Honselmann, Jonas Wagner, Philipp Daum Fraunhofer IWM MikroTribologie Centrum µTC, Germany Martin Dienwiebel KIT-IAM MikroTribologie Centrum µTC,, Germany Thomas Rühle BASF SE, Germany Vacuum Tribology with Gas Phase Deposited Lubricant Additives

15:00 – 15:30 Ullrich Gunst Analytical Tribology Network, Germany Characterization of Lubricating Oils and Greases with Different ToF-SIMS Methods


35


Afternoon D-4

Session:

Lubrication Fundamentals (2)

Chair:

J. Müllers Robert Bosch GmbH, Renningen, Germany

14:00 – 14:30 Fabrice Dassenoy, Istvan Zoltan Jenei Ecole Centrale de Lyon, France Arash Khajeh, Ashlie Martini University of California Merced, Merced, CA, USA Thierry Epicier MATEIS, INSA Lyon, France Dairene Uy, Hamed Ghaednia, Arup Gangopadhyay Ford Motor Company, Dearborn, MI, USA Mechanical Characterization of Diesel Soot Nanoparticles: In Situ Compression in the Transmission Electron Microscope and Simulations

14:30 – 15:00 Shreyas Jalikop AC2T research GmbH, Austria Prof. Bernhard Scheichl, Carsten Gachot Technische Universität Wien, Austria Fundamentals of Directional Spreading of Lubricants over Multi-Scale Textured Surfaces

15:00 – 15:30 Rui Li, Xianghui Meng Shanghai Jiao Tong University, China Analysis of the Critical Friction Pairs in Marine Diesel Engines Based on a Tribo-Dynamic Model


36


Afternoon D-5

Session:

Wear of Materials

Chair:

M. Dienwiebel Karlsruhe Institute of Technology, Germany

14:00 – 14:30 Igor Velkavrh, Florian Ausserer, Stefan Klien, Joël Voyer, V-Research GmbH, Austria Harald Rojacz, Ewald Badisch AC2T research GmbH, Austria Klaus Lingenöl Lingenhöle Technologie GmbH, Austria Residual Stresses in Nitrocarburised Layers Applied for Tribological Applications

14:30 – 15:00 Krunal Mehta, Vishvesh Badheka Pandit Deendayal Petroleum University, India Evolution of Wear Behavior of Al6061-B4C Surface Composites with Normal Load and Sliding Speed

15:00 – 15:30 Daniel Kümmel, Erik Segebade, Volker Schulze, Johannes Schneider KIT Karlsruhe Institute of Technology, Germany Tribological Behavior of Ti6Al4V Surface Textured by Cutting Tools


37


Afternoon D-6

Session:


Chair:

G. Poll Leibniz Universität Hannover, Germany

14:00 – 14:30 Petra Wiersch, Alexander Furtmann Flender GmbH, Germany A Contribution to the Discussion Regarding the Influence of Very Low Currents on Bearing Life

14:30 – 15:00 Marius Wolf, Arshia Fatemi Robert Bosch GmbH, Germany Nadine Nagler Bosch Rexroth AG, Germany Simulation of Slip in Roller Element Bearing with Lubricant Rheological Models

15:00 – 15:30 Pedro Marques INEGI, Portugal Prof. Jorge Seabra FEUP - Faculdade de Engenharia da Universidade do Porto, Portugal Jorge Castro ISEP - Instituto Superior de Engenharia do Porto, Portugal An Improved Setup for Measurement of Rolling Bearing Torque Loss in a Modified Four-Ball Machine


38


Afternoon D-7

Session:


Chair:


14:00 – 14:30 John Eastwood, Gareth Moody, David Gillespie Croda, USA Investigating Tribofilm Chemistry of Engines Oils Formulated with Organic Polymeric Friction Modifiers and Inorganic Friction Modifiers

14:30 – 15:00 Thilo Krapfl, Ernst Bielmeier Evonik Resource Efficiency GmbH, Germany Denis Sepoetro Evonik Technology & Infrastructure GmbH, Germany Christina Merz Evonik Industries AG, Germany Life Cycle Assessment of an Efficient Hydraulic Fluid

15:00 – 15:30 Sebastian Dörr Lubtrading GmbH, Germany Sustainability – Between Responsibility, Marketing and Green Wash


39


Afternoon D-8

Session:


Chair:

V. Weihnacht Fraunhofer IWS, Germany

14:00 – 14:30 Zulfiqar Khan Bournemouth University, Graet Britain Development of Novel Nano-Composite Coatings for Tribological Applications

14:30 – 15:00 Andreas Keller HS Mannheim, Germany Marco Enger GGB Heilbronn GmbH, Germany Stanislav Trubnykov, Jürgen Molter Hochschule Mannheim, Germany Transfer Film Quality - An Underestimated Factor Concerning Plain Bearing Performance

15:00 – 15:30 Go Tatsumi, Monika Ratoi, Brian Mellor University of Southampton, United Kingdom Yuji Shitara, Kiyomi Sakamoto JXTG Nippon Oil & Energy Corporation, Japan Effect of Friction Modifiers on the Lubrication of Polymeric Materials with Steel Counter Parts


40


Afternoon D-9

Session:

i-Tribomat

Chair:

F. Pagano TEKNIKER, Spain

14:00 – 14:30 Maria Kogia ANSYS GRANTA, United Kingdom Materials Information Management for Tribology

14:30 – 15:00 Helena Ronkainen, Sami Majaniemi VTT Technical Research Centre of Finland, Finland Collaboration Interface

15:00 – 15:30 Ichiro Minami Luleå University of Technology, Sweden Validation of Lab-to-Field Up-Scaling Protocol


41


Afternoon E-1

Session:

Bio Lubricants (1)

Chair:

R. Luther Fuchs Schmierstoffe GmbH, Germany

16:00 – 16:30 Marcella Frauscher AC2T research GmbH, Austria Correlation of Lubricant Degradation & Performance of a Biodegradable Hydraulic Fluid

16:30 – 17:00 Frederik Kort Putzmeister Engineering GmbH, Germany Lifelong Environmentally Acceptable Oil Filling + Condition Monitoring – A Practical Approach

17:15 Departure for Conference Dinner

18:00 Conference Dinner

42


Afternoon E-2

Session:

Automotive Components (1)

Chair:

P. Marklund Luleå University of Technology, Sweden

16:00 – 16:30 Polychronis Dellis ASPETE, Greece Temperature Effect in Friction Force Measurements for a Simplified Piston-Cylinder Setup

16:30 – 17:00 Mitulkumar Solanki, Dipak Vakharia Sardar Vallabhbhai National Institute of Technology, India Experimental Investigation between a Layered Cylindrical Hollow Roller and Flat Plate



43


Afternoon E-3

Session:

Additives (5)

Chair:

A. Stratmann RWTH Aachen University

16:00 – 16:30 Michael Heeran, Johanna C. Speelman Nouryon, The Netherlands Philip W. Dyer Durham University, United Kingdom Understanding ZDDP-OFM Additive Interactions and their Impact on Performance

16:30 – 17:00 Vlad Bogdan Niste, Hiroyoshi Tanaka, Joichi Sugimura Kyushu University, Japan NaNO2 as Lubricant Additives against Hydrogen Permeation in Rolling Contacts



44


Afternoon E-4

Session:

Grease Condition Monitoring

Chair:

Paolo Falzoni Kinolt GmbH, Germany

16:00 – 16:30 Richard Wurzbach MRG Labs, USA Small Volume Sampling and Analysis for New and In-Service Greases

16:30 – 17:00 Simon Eiden, Klaus Lucka TEC4FUELS GmbH, Germany Investigations of Grease Thickener Degradation



45


Afternoon E-5

Session:

Applications

Chair: A. Pauschitz AC2T research GmbH, Austria

16:00 – 16:30 Rainer Franz, Astrid Lebel, Josef Prost AC2T research GmbH, Austria Mirjam Bäse Magna Powertrain GmbH & Co KG, Austria Chemical Indications of Water Induced Failure Modes in Wet Clutches of Automotives

16:30 – 17:00 Patrick Stuhler, Nadine Nagler Bosch Rexroth AG, Germany Smearing in Full Complement Cylindrical Roller Bearings



46


Afternoon E-6

Session:


Chair:

G. Jacobs RWTH Aachen University, Germany

16:00 – 16:30 Michiel van Breemen, Glen May Quaker Chemical, The Netherlands Reducing the Risk for Glossy Wear Marks to Occur on Roller-Bearing Linear Guides

16:30 – 17:00 Daniel Strömbergsson, Pär Marklund, Kim Berglund Luleå University of Technology, Sweden Dynamic Simulation of Rolling Element Bearing Vibrations Using SKF BEAST and Test Rig Validation



47


Afternoon E-7

Session:


Chair:

M. Matzke Robert Bosch GmbH

16:00 – 16:30 Daniela Posselt, Michael Adler AC2T research GmbH, Austria Erwin Haberda, Wolfgang Voiticek Leobersdorfer Maschinenfabrik GmbH, ,Austria Specification Procedure for Lubricants Applied in Oil and Gas Exploration Compressors

16:30 – 17:00 John Burbank, Jürgen Rausch, Rolf Luther, Gunther Kraft Fuchs Schmierstoffe GmbH, Germany New Approaches to Extreme Low-Friction Lubrication



48


Afternoon E-8

Session:


Chair:

V. Weihnacht Fraunhofer IWS, Dresden, Germany

16:00 – 16:30 Linus Everlid, Johan Blomkvist, Boris Zhmud Applied Nano Surfaces Sweden AB, Sweden The Properties of Solid Lubricant Films Generated by Reactive Quenching

16:30 – 17:00 Maryam Bahrami, Jürgen Rühe University of Freiburg, Germany Vincent Le Houérou Institut Charles Sadron ,Strasbourg, France Studies on the Lubrication of Surface-attached Hydrogels



49


Afternoon E-9

Session:

i-Tribomat

Chair:

E. Nyberg Luleå University of Technology, Sweden

16:00 – 16:30 Amaya Igartua, Alberto Alberdi, Itziar Alonso Fundación TEKNIKER, Spain Franz Pirker AC2T research GmbH, Austria Building I-Tribomat Interconnections with Materials Ecosystem

16:30 – 17:00 Ivana Tóth AC2T research GmbH, Austria Panel Discussion (i-TRIBOMAT Communication)



50

30 Jan 2020 Thursday

Morning P-3

Session:

Plenary Session (3)

Chair:


09:00 – 09:30 Martin Dienwiebel Karlsruhe Institute of Technoglogy (KIT), Germany In-situ Studies on the Competitive Adsorption of Lubricant Additives

09:30 – 10:00 Nuria Espallargas Norwegian University of Science and Technology NTNU, Norway Water Lubrication – Challenges and Opportunities

10:00 – 10:30 Stefan Eder, Manel Rodríguez Ripoll, Ulrike Cihak-Bayr AC2T research GmbH, Austria Daniele Dini Imperial College London, UK Carsten Gachot Vienna University of Technology, Austria MD Simulations of FCC Alloys under Dry Sliding Yield a Mechanism Map for Near-Surface Microstructural Development


51


Morning F-1

Session:

Bio-Lubricants (2)

Chair:


11:00 – 11:30 Martin Kingsley Argent Energy, United Kingdom The Use of Alternative Sources of Feedstocks as Renewable and Biodegradable Lubricants

11:30 – 12:00 Peter Lohmann, G. Gaule Hermann Bantleon GmbH, Germany A Look Behind the Scenes of Biological Degradation of Lubricants

12:00 – 12:30 Patrick Galda Panolin Production AG, Switzerland Quo vadis – Bio-Lubricants? An Update about the Latest Activities of CEN TC19 WG33


52


Morning F-2

Session:

Automotive Components (2)

Chair:

R. Larsson Luleå University of Technology, Sweden

11:00 – 11:30 Pär Marklund, David Sandlund, Oscar Wintercorn, Kim Berglund Luleå University of Technology, Sweden Influence of Wet Clutch Running-In on Friction, Pressure Distribution and Permeability

11:30 – 12:00 Pedro Marques INEGI. Portugal Justino Cruz, Jorge Seabra Ramiro Martins ISEP - Instituto Superior de Engenharia do Porto, Portugal No-Load Losses in a Car Differential


53


Morning F-3

Session:

Lubricant Condition Monitoring

Chair:

C. Gachot Vienna University of Technology, Austria

11:00 – 11:30 Norman Rohrwick OilDoc GmbH, Germany CM of Oil and Equipment Status by the Use of Online Oil Sensors and Multivariate Data Analysis

11:30 – 12:00 Haris Trobradovic SDT International, Belgium Ultrasound Guided Condition Based Lubrication

12:00 – 12:30 Pawel Rycerz, Markus Hartinger, Amir Kadiric Imperial College London, United Kingdom Early Detection of Fatigue Damage in Rolling-Sliding Contacts


54


Morning F-4

Session:

E-Mobility (1)

Chair:

S. Meinhardt ExxonMobil Chemical Central Europe GmbH, Germany

11:00 – 11:30 Ling Wang University of Southampton, United Kingdom A Study of Rolling Element Bearings under the Influence of Electrical Environment

11:30 – 12:00 Steffen Bots Lubevisio GmbH, Germany Manfred Jungk MJ Tribology, Germany Silicone Fluids with Optimized Tribological Behaviour through Molecule Structure Enhancement - A Solution for EV Drivetrains

12:00 – 12:30 Amir Kadiric, Athanasios Christoduolias Imperial College London, United Kingdom A Model for Prediction of Gearbox Power Losses under Conditions Pertinent to EV Operation


55


Morning F-5

Session:

Simulation (1)

Chair: C. Pastor Robert Bosch GmbH, Germany

11:00 – 11:30 Marko Tosic, Roland Larsson, Marcus Björling Luleå University of Technology, Sweden Thomas Lohner, Karsten Stahl Technical University of Munich, Germany Janko Jovanovic University of Montenegro CFD Analysis of EHL Films at High Loads

11:30 – 12:00 Arn Joerger, Albert Albers Karlsruhe Institute of Technoglogy (KIT), Germany A Numerical Approach for the Determination of Archard’s Wear Coefficient


56


Morning F-6

Session:

Tribochemistry

Chair: Nuria Espallargas Norwegian University of Science and Technology NTNU, Norway

11:00 – 11:30 Tadashi Oshio, Clotilde Minfray, Jules Galipaud, Thierry Le Mogne, Fabrice Dassenoy Ecole Centrale of Lyon, France Kazuhiro Yagishita JXTG Nippon Oil & Energy Corporation, Japan Tribochemical Properties of Dialkyl Phosphonoacetic Acid in Synthetic Ester Base Fluid

11:30 – 12:00 Andreas Willecke Fuchs Schmierstoffe GmbH, Germany Atomistic Simulation of Sulfurized Additives in Lubricants


57


Morning F-7

Session:

Wear Testing

Chair:

S. Beyer-Faiss Dr. Tillwich GmbH, Werner Stehr, Germany

11:00 – 11:30 Thomas Klotz IPEK Institute of Product Engineering, Germany Investigation of the Heat Distribution of a Dry Friction Brake During Fade and Recovery Using Fiber Optic Sensing and Infrared Technology

11:30 – 12:00 Henrik Buse Slovak University of Technology and UAS Mannheim, Slovak Republic Erika Hodúlová Slovak University of Technology in Bratislava, Slovac Republic Fretting Wear Observation in Plane Metal to Metal Contacts

12:00 – 12:30 Kosta Simonovic, Tomas Vitu, Martin Danek, Tomas Polcar Czech Technical University in Prague, Czech Republic Newly Developed Device for the Investigation of the Running-In Behaviour


58


Morning F-8

Session:

Unconventional Lubricants (1)

Chair:

F. Gatti Fraunhofer Institute for Mechanics of Materials IWM, Germany

11:00 – 11:30 Maria-Dolores Aviles, Maria-Dolores Bermudez, Francisco-Jose Carrion, Ramon Pamies, Jose Sanes, Ana-Eva Jimenez Universidad Politecnica de Cartagena, Spain Tribological Study of New Ionic Liquid Dispersions and Blends

11:30 – 12:00 Sergei Glavatskih KTH Royal Institute of Technology, Sweden Rene Westbroek, Johan Leckner Axel Christiernsson International AB, Sweden Lubrication of Spiral Bevel Gears: Influence of the Grease Thickener

12:00 – 12:30 Michael Gleß Technische Akademie Esslingen e.V., Germany Tribological Investigation of Shelf-Sharpening and Innovative Lubrication Solutions


59


Morning F-9

Session:

Metal Working Fluids (1)

Chair:

F. Passman Biodeterioration Control Associates, Inc., USA

11:00 – 11:30 Harish Potnis ANGUS CHEMICAL COMPANY, India Optimizing the Sustainability, Performance and Cost of your MWF

11:30 – 12:00 Thomas Koch City University of Bremen, Germany Algae-Based Bio Lubricant Additives: Extraction, Application and Tech. Properties – from the Algae to the Technical Product

12:00 – 12:30 Frederick J. Passman Biodeterioration Control Associates, Inc., USA Peter Küenzi Blaser Swisslube, Switzerland Jordan Schmidt LuminUltra Technologies, Ltd., Canada Adenylate Energy Charge – New Tool for Determining MWF Microbial Population’s Condition


60


Afternoon G-1

Session:

Bio Lubricants (3)

Chair:


14:00 – 14:30 Yiyuan Tian, Sergei Glavatskih KTH Royal Institute of Technology, Sweden Thomas Norrby Naphthenics TechDMS, Sweden Additive Expression and Tribology of Novel Hybrid Base Fluids

14:30 – 15:00 Wilhelm Huber Peter Greven GmbH & Co. KG, Germany Estolides – a New Category of High-Performance Esters

15:00 – 15:30 Mark Miller Biosynthetic Technologies, USA Innovations and Regulations for Biobased and Sustainable Lubricants

15:30 – 16:00 Basudeb Saha University of Delaware, USA Sustainable Lubricants from Biomass

16:00 – 16:15 Short Break

61


Afternoon G-2

Session:

Materials Characterisation

Chair:

M. Dienwiebel Karlsruhe Institute of Technology, Germany

14:00 – 14:30 Christian Greiner, Julia Lehmann, Reinhard Schneider Karlsruhe Institute of Technology, Germany Sliding Velocity and Exposure Time Affect Tribologically-Induced Oxidation in Copper

14:30 – 15:00 Jian Song, Haomiao Yuan Ostwestfalen-Lippe University of Applied Sciences and Arts, Germany Effect of Lubrication and Thermal Aging on the Fretting Behavior of Electrical Contacts

15:00 – 15:30 Tarek Lutz University of Tübingen, Germany Nano- and Micro Analytical Approach for Understanding the Early State of Bearing Failure


62


Afternoon G-3

Session:

Artificial Intelligence in Tribology

Chair:

A. Vogt Robert Bosch GmbH, Germany

14:00 – 14:30 Ulrike Cihak-Bayr, Reinhard Grundtner, Franz Pirker AC2T research GmbH, Austria Harald Steiner, Thomas Glatzl Danube University Krems, Austria Machine Learning Algorithms for Health Monitoring of Sliding Bearings

14:30 – 15:00 Florian König, Georg Jacobs, Achraf Ouald Chaib, Christopher Sous RWTH Aachen University, Germany Machine Learning Based Anomaly Detection for Wear Lifetime Prediction of Journal Bearing Systems

15:00 – 15:30 Barbara Monse Bureau Veritas Commodities, Germany Artificial Intelligence Transforms Oil Analysis


63


Afternoon G-4

Session:

E-Mobility (2)

Chair:

S. Bots LUBEVISIO GmbH, Germany

14:00 – 14:30 Sven Meinhardt ExxonMobil Chemical Central Europe GmbH, Germany Synthetic Base Oil Solutions for EV Driveline Fluids Applications

14:30 – 15:00 Keiichi Narita Idemitsu Kosan Co.,Ltd., Japan Study of Motor Cooling Performance of Lubricants with Application to Transaxles in HEVs and Evs

15:00 – 15:30 Sirui Chen, Katharina Bause, Albert Albers KIT / IPEK - Institute of Product Engineering, Germany Dr. -Ing. Knut Erdmann Schaeffler Technologies AG Tribological Performance Descriptions of Friction System in Synchronization for E-Powertrain

15:30 – 16:00 Leonardo Israel Farfan Cabrera Escuela de Ingeniería y Ciencias, Tecnologico de Monterrey, Mexico Tribology of Electric Vehicles – Future Improvement Trends for Critical Components


64


Afternoon G-5

Session:

Simulation (2) – Soft Contacts

Chair:

C. Pastor Robert Bosch GmbH, Germany

14:00 – 14:30 Andreas Ziegltrum, Enzo Maier, Thomas Lohner, Karsten Stahl Gear Research Centre (FZG), Germany A Study on Thermal Elastohydrodynamic Lubrication of Coated Polymers

14:30 – 15:00 Fabian Kaiser, Andreas Gropp, Ravindrakumar Bactavatchalou, Axel Rieder Freudenberg Technology Innovation SE & Co. KG, Germany Simulation of Rubber Friction: Comparison to Pin-On-Disc Measurement Results

15:00 – 15:30 Michele Scaraggi Università del Salento, Italy Surface Rough-ness Anisotropy in Soft Contacts: From Microbot Locomotion to Seals Applications

15:30 – 16:00 Alexander Elter Robert Bosch GmbH, Germany Elastohydrodynamic Simulation of Rein-forced Plastic Materials in Conformal Contacts


65


Afternoon G-6

Session:

Lubrication Fundamentals

Chair:

J. Seabra FEUP - Faculdade de Engenharia da Universidade do Porto, Portugal

14:00 – 14:30 Volker Diegelmann VDEh-Betriebsforschungsinstitut GmbH, Germany Jens Ostrowski Bechem GmbH, Germany Andreas Johnsson Swerim AB, Sweden Martin Raulf ThyssenKrupp Steel Europe AG, Germany Toralf Saffer ArcelorMittal Eisenhüttenstadt GmbH, Germany Patrick Charbonnier Luxcontrol SA, Luxembourg Application of Single-Phase Oil-Free Lubricants in Cold and Hot Rolling of Flat Material

14:30 – 15:00 Carlos Fernandes INEGI, Portugal Jorge Seabra,FEUP, Portugal Luis Magalhães, João Pais ISEP, Portugal Influence of Run-In Load and Temperature on Gear Efficiency and Micropitting

15:00 – 15:30 Mustafa Yilmaz, Ali Önüt, Thomas Lohner, Karsten Stahl Technical University of Munich, Germany On-Demand Gearbox Lubrication: an Efficiency Study from Dip to Minimum Quantity Lubrication

15:30 – 16:00 Alberto Porras-Vazquez, David Philippon, Philippe Vergne, Nicolas Fillot, ,Lionel Lafarge INSA de Lyon, France Guillermo E. Morales-Espejel SKF Engineering and Research Centre Nieuwegein, The Netherlands LaMCoS INSA de Lyon, France A Dual Numerical-Experimental Approach for the Study of Oil Starvation in Point Contacts


66


Afternoon G-7

Session:

Test Methods

Chair:

M. Grebe Mannheim University of Applied sciences, Germany

14:00 – 14:30 Susanne Beyer-Faiss Dr. Tillwich GmbH Werner Stehr, Germany Modified Accelerated Ageing Test Method for Life Time Evaluation of Lubricants and Additives

14:30 – 15:00 Thomas Witt Dr. Tillwich GmbH Werner Stehr, Germany Determination of Flow Point of Soft Lubricating Greases Using the Test Method of Inclining Rod

15:00 – 15:30 Markus Matzke, Jörg Schöfer Robert Bosch GmbH, Germany Gerd Dornhöfer BMS, Germany Study of Thermooxidative Ageing and Proposal of a Test Method Standard


67


Afternoon G-8

Session:

Unconventional Lubricants (2)

Chair:

S. Glavatskih KTH Royal Institute of Technology, Sweden

14:00 – 14:30 Felix Gatti, Tobias Amann Fraunhofer Institute for Mechanics of Materials IWM, Germany Jürgen Rühe Department of Microsystems Engineering - IMTEK, Germany Programmable Friction

14:30 – 15:00 Marcella Frauscher, Lucia Pisarova, Thomas Lebersorger, Nicole Dörr AC2T research GmbH, Austria Multi-Stage Assessment of Space Lubricants

15:00 – 15:30 Erik Nyberg, Ichiro Minami Luleå University of Technology, Sweden Silicate-forming Ionic Liquid Triboimprovers for Multiply Alkylated Cyclopentanes

15:30 – 16:00 Roman Nevshupa IETCC-CSIC, Spain In Operando Study of Tribochemical Processes through Analysis of Triboemission of Gases


68


Afternoon G-9

Session:

Metal Working Fluids (2)

Chair:

F. Passman Biodeterioration Control Associates, Inc., USA

14:00 – 14:30 Theresa Jähnig, Mikhael El-Khoury, Technische Universität Dresden, Germany Andrés F. Lasagni Fraunhofer - Institute for Material and Beam Technology (IWS), Germany Lubricant-Free Metal Forming – Friction Reduction by Laser Structuring Ta-C Coated Forming Tools

14:30 – 15:00 Mayank Kumar Atlas Copco Industrial Technique AB, Sweden Erik Persson PhD Atlas Copco Industrial Technique AB, Sweden Sergei Glavatskih KTH Royal Institute of Technology, Sweden Does a Cutting Fluid Influence the Reliability of a Threaded Fastener Joint?

15:00 – 15:30 Peter Küenzi Blaser Swisslube AG, Switzerland Nicola Di Maiuta Microstech AG, Switzerland A Closer Look at Microbiology in Metalworking Fluids

15:30 – 16:00 Nicole Clarkson, Harish Potnis, Clayton Cooper ANGUS CHEMICAL COMPANY, USA Aluminium Staining: Achieving Performance through Amine Selection


69


Afternoon P-4

Session:

Concluding Plenary Session

Chair:

M. Gleß Technische Akademie Esslingen, Germany

16:15 – 16:45 Guillermo E. Morales-Espejel SKF Research and Technology Development, The Netherlands LaMCoS INSA de Lyon, France Tribology Modelling of Lubricated Contacts for Electrification

16:45 – 17:00 Mirjam Bäse Magna Powertrain GmbH & Co KG, Austria Florian Rummel Anton Paar Germany GmbH, Germany Hitoshi Washizu University of Hyogo, Hyogo, Japan Vlad Bogdan Niste Kyushu University, Kyushu, Japan Stephan Henzler Carl Bechem AG, Hagen, Germany Rebekka Drafz Fuchs Schmierstoffe GmbH, Mannheim, Germany GfT Young Tribologists: How Tribology Grows Further and Further

17:00 Farewell Party

Documents

11 Coll Programm für Druck - tae.de · Group V Basestocks on the Rise – Unconventional Base Stocks for more Sustainable Lubrication