1210E it4 Forwarder

More power and torque

Reduced emissions

New cabin technology

Improved boom control

A coMpletely New forwarder with:A coMpletely New forwarder with:

1

What’s new?See all the new features in the John Deere 1210E it4 Forwarder.

Enginethe new John Deere EPA interim tier 4 (it4) / EU Stage iii B engine delivers reduced emissions and more power and torque.

6

Boost your productivity

The John Deere 1210E IT4 Forwarder features improve-ments to the engine, cabin ergonomics, control system, frames and structures, powertrain, and boom.

4

22

CabinCabin ergonomics and the control system have been improved.

10

SBC and iBCSmooth Boom Control (SBC) and optional intelligent Boom Control (iBC) enable faster and more convenient boom operation.

12

PowertrainThe more efficient powertrain includes a larger hydraulic pump and drive motor.

8

33

eNgINe • MeetsIT4regulations

without Diesel exhaust Fluid (DeF)

• Morepowerandtorque

FRAMes & stRuctuRes• New generation head

board: enchanced durability and visibility

• Increasedcross-sectionalareaof4.7m2 for the wide load space option

coNtRol systeM• NewCAN-bushardware:

fewer fault alarms and better fault analysis

• TimberMatic™F-12software with smooth Boom control (sBc)

4

cABIN• ImprovedpositionforPC

and radio• ModularTelematics

gateway (Mtg) for the useofJDLink™wirelesscommunication system access

poweRtRAIN• Newlargerpump• Largerdrivemotor

BooM• Morereliabilityand

productivity• SBC• IBC(availableasoption)

From small details to total solutionA great forwarder is the sum of its parts – a result of innovative details and expertise in engineering. But what makes a John Deere forwarder even greater is that it’s backed by the total Solution commitment. Besides a great piece of machinery, you also receive our comprehensive after-sales service, including professional maintenance and user training support. Why? Because your success is our business.

MoRe INFoRMAtIoN

oNlINe:scan with your phone or go to

www.johndeere.co.uk/Forestry

5

PowerTech PVX Interim Tier 4 technology

DOCExhaust

Out DPF

Fresh Air

Compressed Air From Turbocharger

Exhaust

EGR Cooler

VGTInjector

Air-

to-a

ir C

oole

r

Intake Throttle

Valve

EGR Valve

John Deere Powertech™ engines provide the right technology, right now. Simple to operate and maintain while delivering power, fuel efficiency, reliability, and low cost of ownership, our latest IT4 technology is backed by a comprehensive worldwide network of Deere dealer service locations.

MoRe poweR AND toRque – less emissions

the Powertech engine meets it4 emission regulations without Diesel Exhaust Fluid (DEF), based on proven EGR and an added exhaust filter ATD. To put it simply, the IT4 engine provides more power and torque, and reduces emissions. You will also benefit from numerous other features including reduced daily maintenance and costs, and improved engine power, responsiveness, and cooling.

the engine hood design is new and improved for easier maintenance.

6

Features of the new John Deere epA InterimTier4(IT4)/EUStageIIIBengine

• Platform cooler package with larger radiator cooling capacity and hydraulic reversible fan

• turbocharged (Variable Geometry turbo, VGt); charge air cooled

• Separate Charge Air Cooler (CAC) fan

• PowerCore™ air filter

• Larger Exhaust Gas Recirculation (EGR) cooler and valve

• Aftertreatment Device (AtD) with mounting frame and outlet pipe

6

Enhance power – not emissions

7

New powertrain FoR eFFIcIeNt log tRANspoRtthe John Deere 1210E it4 Forwarder isequipped with forest-tough bogie axles,V-groove axle mounts, frames, and a middlejoint. these features enable exceptionaluptime throughout the life of the machine.

John Deere Duraxle™ heavy-duty bogies are designed to carry high loads in tough terrain and over long distances. Not only are the bogies more durable, but the V-groove axle mounted to the frame bears up to 20-percent-higher dynamic side loads. More robust and standardized components, such as middle joints, maximize machine performance. Standardized components also ease service and parts availability.

FeaturesoftheIT4powertrain

• New larger pump

• New larger drive motor

• Efficient use of hydraulic flow

• Better control functions

• More hydraulic power

• improved tractive effort

• Smooth movement over obstacles and on hillsides

8

the John Deere 1210E it4 Forwarder is designed and built for the toughest of conditions.

Stronger performance and easier service

9

New and improved it4 cabin – MoRe coMFoRtABle, MoRe pRoDuctIve

Improved ergonomics

• Cab-rotating angle: 290 deg.

• Boom follow-through

• Cab-leveling tilt angle: front and back/sides: 6 deg./10 deg.

• Cab mounted to separate bearing for quick, smooth, and quiet rotation

• Large preformed windows and narrow cab frames

• Large windshield wipers standard; side wipers optional

• Powerful work lights, with LED or halogen option sets

• Sideways cab rotation and rearview camera ease reverse machine operation

• Hydraulic steps and wide opening door for easy cabin entrance/exit

• Be-Ge comfort seat with ergonomic hand-control panels

• Ergonomic dashboard controls

• Low noise and vibration levels

• Polycarbonate windows throughout

• Conforms to all forest machine safety standards

Maximum productivity is all about keeping the operator safe andcomfortable. inside the spacious, quiet cab, you will have everythingyou need to reach maximum productivity. the it4 cabin delivers acombination of great ergonomics, high operator productivity,and precise control.

the rotating and smooth-leveling cabin turns 290 degrees, providing 360-degree visibility of the surrounding jobsite and boom movements for safe and efficient log loading. Visibility is further enhanced by a rearview camera, expansive preformed polycarbonate windows, and large standard windshield and optional side wipers. the cabin equipment is designed to the smallest detail to keep you comfortably productive.

Cabin Rotation

1010

Operator comfort, from easy and accurate machine control to convenient cooler storage, is the focus of the ergonomic cabin.

Ergonomics and efficiency

11

MoRe pRoDuctIvIty – less vibrationSmooth Boom Control (SBC) and intelligent Boom Control (iBC) are exclusive John Deere software innovations that bring added efficiency and operating comfort to forwarders.SBC literally smoothens out unnecessary jerking of the boom control joystick. this increases both loading speed and productivity.

iBC is a precision and power control feature that allows the operator to directly control the boom tip, instead of independent boom joint movements. this leads to more relaxed, precise and faster loading – and ultimately enhances productivity even more.

SBC settings page in the TimberMatic™ F-12 control system.

12

Smooth Boom Control (SBC) is a standard feature in John Deere 1210E it4 forwarders. intelligent Boom Control (iBC) in turn is an optional feature, which further enhances the boom control. these two functions optimize your boom handling, and create a union between power and precision.

Great control meets speed and productivity

sBc and IBc advantages

• Greater loading speed

• Better control

• Added operating comfort

• Enhanced productivity

13

1210E it4 Forwarder technical data 6- and 8-wheel configurations

1210E it4

LOAD RAtiNG 13 metric tons / 14.3 short tons

NON-ROAD EMiSSiON StANDARD EPA interim tier 4 / EU Stage iii B

DiESEL ENGiNE

Maximum Power torqueFuel tank Capacity

John Deere 6068 Powertech™ Plus turbocharged, charge air cooled, 6 cylinders, 6.8l displacement145 kW @ 1,600–1,900 rpm / 195 SAE hp 867 Nm @ 1,300–1,600 rpm / 640 lb.-ft.

167 l / 44 gal. U.S.

tRANSMiSSiONtractive Forcetravel Speed, Gear 1travel Speed, Gear 2

Hydrostatic-mechanical, 2-speed gearbox175 kN / 39,340 lb.0–7,5 km/h / 0–4.7 mph0–23 km/h / 0–14.3 mph

StEERiNG turning Angle

Proportional frame steering with mini levers±44 deg.

BRAKES the service brakes are hydraulically actuated, oil-immersed, multi-disc brakes; the parking and emergency brakes are spring actuated; the frame brake is automated

AXLES/BOGiES Heavy-duty Duraxle™ balanced-gear bogie axles at the front and rear; hydromechanical differential lock at the front and rear; 6-wheel models have rigid axles at the front

ELECtRiC SYStEMVoltageBatteriesAlternatorLights

24 V2x149 Ah150 A / 28 VHalogen: 8 work, 2 waist, 1 rear, and 2 boom lights; LED lights optional

HYDRAULiCSPump CapacityOperating PressureHydraulic tank

Load sensing, power adjustable160 cm3 / 9.8 cu. in.24 MPa / 3,480 psi161 l / 42.5 gal. U.S.

BOOMMaximum Reach LengthsGross Lifting torqueSlewing torqueSlewing Angle

CF77.2/8.5/10 m / 23.6/27.9/32.8 ft.125 kNm / 92,195 lb.-ft.32 kNm / 23,602 lb.-ft.380 deg.

CABiNRotating AngleSideways tiltForward and Backward tilt

Rotating, or rotating and leveling290 deg.10 deg.6 deg.

CONtROL SYStEM PC / Windows®-based timberMatic™ F-12 or CommandCenter™

*Please note: Measurements are guidelines only and may vary depending on production tolerances. The manufacturer reserves the right to make changes. All product names featured in this brochure are registered trademarks of John Deere Forestry Oy.

1414

F

G

AB C

DE

MEASUREMENtS* 1210E it4 Long wheelbase

Length [A] 9720 mm / 383 in. 10920 mm / 430 in.

Wheelbase [B+C] 5250 mm / 207 in. 5850 mm / 230 in.

Bogie Center – Middle Joint [B] 1850 mm / 73 in. 1850 mm / 73 in.

Middle Joint – Bogie Center [C] 3400 mm / 134 in. 3800 mm / 150 in.

Headboard – Bogie Center [D] 2600 mm / 103 in. 3000 mm / 118 in.

Bogie Center – Rear [E] 1900 mm / 75 in. 2500 mm / 98 in.

Width – 600 Series tires [F] 2746 mm / 108 in.

Width – 700 Series tires [F] 2956 mm / 116 in.

turning Angle 44 deg.

Outer turning Radius – 700 tires 8957 mm / 353 in.

inner turning Radius – 700 tires 5125 mm / 202 in.

transport Height 3800 mm / 150 in.

Ground Clearance 6W / 8W [G] 670/660 mm / 26.4/26 in.

tires, Front 6W / 8W 34–14 / 26,5–20

tires, Rear 26,5–20

Min. Machine Weight 6W 16 450 kg / 36,270 lb.

Min. Machine Weight 8W 18 350 kg / 40,460 lb.

Approach Angle 6W / 8W 25 deg. / 36 deg.

examples of standard equipment* Rotating cabintimberMatic™ F-12 control system with printertimberLink™ overview windowHydraulic reversing cooling fanHydraulic stairsAir-suspended seatHalogen lightsHeavy-duty Duraxle™ bogie axlesFrame brakeEngine air filter with pre-cleaner element

examples of optional equipment*VarioSpeed automatic transmissionRotating and leveling cabinCommandCenter™GPS device and softwareRearview cameraVLS load-space optionsRear frame extensionBoom scalesLED lightsPreheater for engine and cabinElectric fuel-refill pumpElectric hydraulics-refill pumpBiodegradable hydraulic oilHydraulic vacuum pumpHydraulic system bypass filterAutomatic fire-extinguishing systemCentral lubrication systemDecking bladetool kitstracks and chains

* Available in specific countries; see your dealer for details.

*Please note: Measurements are guidelines only and may vary depending on production tolerances.

LOAD-SPACE OPtiONS 1210E it4 6W and 8W

total Length [D + E] • Standard • Long • VLS

4500 mm / 177 in. 5700 mm / 224 in. 4500 mm / 177 in.

Load Space Width • Standard Wheelbase • Long Wheelbase

Narrow / wide 2700 mm / 106 in. / 2930 mm / 115 in. 2700 mm / 106 in. / —

Cross-sectional Area Narrow / wide 4.0/4.7 m2 VLS 4.0–4.8 m2

This brochure/literature has been compiled with care for worldwide circulation. While general information, pictures, and descriptions are provided, some illustrations and text may include options and accessories not available in all regions. Please contact your local dealer for details. John Deere reserves the right to change specification and design for products described in this brochure without notice. No liability for errors and omissions.

1515

www.JohnDeere.comPrinted in Finland, Offset Ulonen 05-2013

this brochure has been compiled for worldwide circulation. While general information, pictures and descriptions are provided, some illustrations and text may include options and accessories not available in all regions. For more information, please contact your local John Deere dealer. John Deere reserves the right to change specification and design for products in this brochure without notification. John Deere is not liable for any possible errors or omissions in this brochure.

the leading providerof advanced harvesting solutions and servicesOur ambition is to offer innovative solutions to make your work more productive, efficient and easy. We are dedicated to being a long-term partner for our customers. Our wide distribution network offers professional support and services to customers worldwide.

Yoursuccessisourbusiness.

16