Sliding gate operators

Hinged gate operators

Marantec Overview Gate Operators

2

Hinged gate operators

Operator systemsfor hinged gates

Perfect swinging motion: Marantec hinged gate operators are ideal for opening any gate that needs to be swung open – safely and conveniently. No matter what the weather, and with a wealth of technical details for adapting them perfectly to every hinged gate system. Attractive and stylish on the outside, with a piston rod or trolley, either short or long version, and with the latest DC technol-ogy on the inside.

3

Electronic hall sensors as limit switches: They guarantee precise deter-mination of the operator position and so

also the gate.

Piston rod principle: It ensures excep-tionally effective transmission of power

and extremely quiet operation.

Control x.52: the standardised EOS control with a high-quality

LC display.

Marantec reference point technology: guarantees highprecision processing of the end positions while at the same time protecting the mechanical

components.

Comfort 515, 515L

Comfort 516, 516L

4

Hinged gate operators

Comfort 525, 525L

Comfort 530L

Command 108 external hand-held programming device: enables operators to be programmed 1:1 with

the greatest convenience.

Power transmission: The exceptionally sturdily-built components guarantee extremely good power transmission.

Emergency release: extremely light and, above all, easy to access; the Allen key required for this purpose is kept in the operator housing and is invisible

from the outside.

Trolley principle: The trolley incor-porated in the housing takes care of

power transmission and makes for an ultra-sleek operator.

** available in Spring 2014

5

Comfort 560*

Comfort 585, 586

Control x.52 EOS control: perfectly positioned in the operator housing and so particularly easy to

access and operate.

Wall-mounting: can be pre-assembled, making it extremely easy to fi x the

operator to the pillar.

Release mechanism: allows the operator to be released if

the worst comes to the worst, and for maintenance purposes.

Particularly waterproof: The mechanical and electronic operator

systems are insulated with a special seal.

6

Hinged gate operators

* depending on installation situation/gate-specifi c** depending on gate width, weight given is for gate wing measuring 1 metre in width

Technical data

Comfort 515 (L)

Comfort 530L

Comfort 516 (L)

Comfort 560

Comfort 525 (L)

Comfort 585

Comfort 586

Push and pull force (max. N)

Rated power/standby (W)

Opening angle (max. °)* (larger opening angles available on request)

Wing height (max. mm)

Torque (max. Nm)

Wing width (max. mm)

Opening time (sec.)*

Gate weight (max. kg)

Emergency power (battery backup) (optional)

Motor voltage

120 120 115 115 120 110 110

15 – 25 15 – 25 15 – 25 15 – 25 10 – 20 15 15

<4 <4 <4 <4 <4 <4 <4

2,000 2,000 2,000 2,000 2,000

200 200 400 350 250** 250** 600**

2,500 (3,500) 2,500 2,000 3,0002,500

(3,500)3,000

(4,000) 3,500

1,000 1,000 3,000 3,000

120 250 300

24 V DC 24 V DC 24 V DC 24 V DC 24 V DC 24 V DC 24 V DC

7

Sliding gate operators

Operator systemsfor sliding gates

Perfect sliding motion: Marantec sliding gate operators are ideal for all gates that are slid to and fro to open and close them. Safe and also convenient. No matter what the weather, and with a wealth of technical de-tails for adapting them perfectly to suit every sliding gate system. They can be supplied as a DC or AC solution to suit the specifi cation and with uniform programming using the unique EOS (EasyOperatingSystem).

8

Sliding gate operators

Comfort 850, 851

Comfort 850S, 851S

Integrated control unit: The control is integrated in the extremely compact design and so is ideally protected from

all kinds of weather.

Height-adjustable spur gear: With a maximum of 160 mm, this can be easily adjusted to fi t the toothed

rack on every gate.

Integrated control unit: The control is integrated in the extremely compact design and so is ideally protected from

all kinds of weather.

Height-adjustable spur gear: With a maximum of 20 mm, this can be easily adjusted to fi t the toothed

rack on every gate.

** available in Spring 2014

9

Comfort 880, 881*

Comfort 745*, 750 FU*

Control x.82 EOS control: perfectly positioned in the operator housing and so

particularly easy to access and operate.

Diecast aluminium fl oor panel: the best materials for a long life.

Integrated control unit: extremely easy to programme using the high-

quality LC display; the main switch is also integrated.

Motor bearing: The spring buffer guarantees maximum durability

of the gear.

10

Sliding gate operators | Parc

Operator systemsfor parc barriers

Parking barrier systems based on Marantec direct current technology provide outstanding safety and comfort features.

* AC motor at 50 Hz / approx. 100 Hz** For gates weighing up to the maximum weights specifi ed, there is no need for an active closing edge safety device for the main and secondary closing edges

Technical data

Push and pull force (max. N)

Wing width (max. mm)

Travel speed (max. mm/sec.)

Emergency power (battery backup) (optional)

Torque (max. Nm)

Gate weight (max. kg)

Rated power/standby (W)

Motor voltage

Comfort 850 (S)

Comfort 881

Comfort 851 (S)

Dynamic 745

Comfort 880

Dynamic 750 FU

24 V DC 24 V DC 24 V DC 24 V DC 400 V AC230 V AC

FC technology

400 800 400 800

75 125

<4 <4 <4 <4 <4 <4

8,000 8,000 8,000 8,000 17,000 17,000

400** 800** 400** 800** 1,300 1,800

180 180 220 220 98 98/210*

11

Parc

Parc 300

Articulated arm: the version designed for restricted overhead clearance < 2.180 mm; available as an optional feature for

the speed version.

Fold-out control unit: The pull-out design makes it perfect to reach

for easy operation.

Exchangeable spring assembly: Easy access means that wear and tear

parts can be replaced at any time.

Access to the technology: the Parc barrier arm housing can be fully removed; this allows free access to the operator and

control components.

Flexible and practicalParc 200

Oval arm profi le77 x 48 mm

Oval arm profi le95 x 52 mm

Parc

Marantec Antriebs- und Steuerungstechnik GmbH & Co. KGRemser Brook 11 · 33428 Marienfeld · Germany +49 52 47 705-0 +49 52 47 705-284

2-E

N46

9-DI

G-5

-101

3 W

e re

serv

e th

e rig

ht o

f tec

hnica

l mod

ifi ca

tions

. |

Desig

n: k

opfs

tand

-web

.de

* depending on the barrier arm length ** Arm length up to 4 m: 1,000; arm length longer than 4 m: 750

Technical data

One-piece barrier arm (max. barrier width)

Opening times (specifi c to barrier)

One-piece articulated barrier arm (max. barrier width)

Motor voltage

Double barrier arms (max. barrier width)

Movement cycles per day (max.)

Double articulated barrier arms (max. barrier width)

Parc 200

Parc 300

Parc 200 speed

24 V DC 24 V DC 24 V DC

4,000 mm 3,000 mm 6,000 mm

8,000 mm 6,000 mm 12,000 mm

4,000 mm

2,000 mm

750 – 1,000**1,000*1,000*

approx. 8 – 15 sec.approx. 3 sec.approx. 5 – 10 sec.