0

34

132. S3:57VS Template synthesis of macroporous calcium monosilicates and based on them new bioceramic composites using Spark Plasma Sintering

Evgeniy Papynov (Far Eastern Branch of Russian Academy of

Sciences) 133. S3:p4wg Fabrication of three dimensional graded macroporous biodegradable scaffold by vacuum

assisted resin transfer molding Qiong Liu

(Fujian University of Technology) 134. S3:RREQ Predicting the compressive strength of desulfurization gypsum using artificial neural

network Hongseok

(Chonbuk national university) 135. S4:NRZD Effect of Ni2+/Cu2+/Co2+ ratio on the structural stability and electrochemical

performance of Ni(OH)2 YanJuan Zhu

(Guangdong University of Technology) 136. S4:ZJGZ Band offsets between the perovskite CsSnCl3, CsSnBr3 and CsSnI3 atchara jaroenjittichai

(Chiang Mai University) 137. S4:WFS5 Functionalized Graphene Wrapped C/MnO2 Composite for High Performance

Supercapacitors Sang Mun Jeong

(Department of Chemical Engineering, Chungbuk National University)

138. S4:XZV3 Characterization of Polypyrrole-Modified Carbon Nanotube Anode in Microbial Fuel Cells Sung-Hee Roh (Chosun University)

139. S4:EX5G Glucose: A medium for green synthesis of carbon-supported nanoparticles Injoon Jang (Korea Institute of Science and Technology)

140. S4:R52U Electrochemical properties of Co@C nanocatalysts for oxygen reduction reaction in anion exchange membrane fuel cell

Sung Jong Yoo (Korea Institute of Science and Technology)

141. S4:BT7P Nanocarbon materials for biofuel elements Vladimir Kolesov (Kotel'nikov Institute of Radio Engineering and

Electronics of RAS) 142. S4:4NM9 Material Life Cycle Assessment (MLCA) on BZY-Ni Hydrogen seperation Membrane by sol-

gel process Tae whan Hong

(Korea National University of transportation) 143. S4:F5RB Effect of Microstructure on the Performance of Micro-tubular Solid Oxide Fuel Cells Made

by Aqueous Electrophoretic Deposition Jih sheng chen

(Taiwan Ming Chi University) 144. S4:6MTN Li2ZrO3 -coated Li1.2Ni0.2Mn0.8O2 for the High Performance Cathode Material in Lithium

Ion Batteries Yongho Lee

(Korea Institute of Science and Technology) 145. S4:QAUM Pitch-coated Hard Carbon/Sn Composite Synthesized by High Energy Ball Milling as an

Anode Material for Sodium Ion Batteries Hyeongwoo Kim

(Korea Institute of Science and Technology) 146. S4:4JPW Fabrication and Electrochemical Performances of Carbon-coated Silicon Anodes Using

Recycled Poly-vinyl Butyral Sheets Sung-Woo Park

(Korea University) 147. S4:B275 One-pot Low-temperature Fabrication of CuO/Graphene Nanosheet Composites for High-

capacity Li Ion Battery Anodes Da-Sol Kim

(Korea university) 148. S4:4Q3G Enhanced electrochemical performance of Ni-rich cathode by Li2ZrO3 surface coating Yong Joon Park

(Kyonggi University) 149. S4:SJQM (Si-Fe)85C15 nanocomposite anode materials prepared by high energy mechanical milling

for high capacity Li-ion secondary batteries Dong-Pil Kim

(Kongju National University) 150. S4:9V5E Electrochemical Characteristic of Reduced Graphene Oxide/Nitrogen-doped Carbon

form/Sulfur Nanocomposite as a Cathode for Lithium-sulfur Batteries Jeongyeon Lee

(Seoul National University) 151. S4:9DH8 Sulfur-impregnated Uniform Hollow Carbon Nanospheres/Graphene Hybrids as Cathode

for Lithium-Sulfur Batteries Seung-Keun Park

(Seoul National University) 152. S4:KUU6 Magnetic and structural properties of Na2FeP2O7 as Pyrophosphate cathode material Chul Sung Kim

(Kookmin University) 153. S4:JUM4 Effects of Electrolyte Concentration on Surface Film Formation on Graphite in Ethylene

Carbonate-Based solutions Soon-Ki Jeong

(Soonchunhyang University)