General Scope

This is a in-depth theoretical course which will give

attendees the background and history of the EN13480

code.

The EN13480 code specifies requirements for industrial

piping systems and supports, including safety systems,

made of metallic materials with a view to ensure safe

operation.

Chempute Software will provide training venue, printed training notes, teas, lunches, course certificate.

3 CPD points are awarded according to the ECSA Continuing Professional Development program

14 - 16 September 2020Metallic Industrial Piping design rules according to EN13480

Registration form

What to Expect - Course Topics

1.0 Introduction

2.0 History of the EN 13480 Code

3.0 EN 13480 Part 1: General

4.0 EN 13480: Materials

4.1 Material and Related Standards

4.2 Werkstoff Numbers

4.3 Naming Designation

4.4 Chemical Composition

4.5 Comparable Materials

4.6 Material Data Sheets

4.7 Requirements for Brittle Fracture and Creep

4.8 Requirements for Fatigue Design

4.9 Material Certification

4.10 Non Destructive Examination (NDE)

5.0 EN 13480-3: Design and Calculation

5.1 Design Conditions

5.2 Hydrotest Conditions

5.3 Loadings and Load Combinations

5.4 Definition of Primary, Secondary or Occasional Loads

5.5 Calculation of Piping Wall Thickness (tmin)

5.6 Material Design Stresses

5.7 Rules and limitations for thin and thick walled components

5.8 Pressure Rating of Components

5.9 Special Components

5.10 Stress Intensification Factors (SIFs)

5.11 Flexibility and Stress Analysis

5.12 Stress Range

5.13 Cold Pull

5.14 Loads to be considered

5.15 Special Consideration for Elevated Temperature

5.16 Pipe Supports

Audience

Suited for engineers involved in the design of

piping according to EN13480

Engineers with experience using EN13480 code

How to enroll

Complete the registration form and e-mail through to:

training@chempute.com or lkylander@chempute.com

Acknowledgement will be e-mailed back to you.

Final confirmation of your booking and all details of the course will be e-mailed to you only on receipt offull payment for the course.

To finalize your booking, please provide an approved purchase order document or proof of payment.

Conditions of registration

By signing and returning this form, you will be registered on the course and will be liable for payment.

Please ensure that you have proper authorisation to do this.

Cancellations are accepted in writing and without penalty up to 14 days prior to the start of the training.

Delegates cancelling in writing between 7 and 14 days prior to the start of the training will be liable for25% of the training cost.

Delegates cancelling in writing less than 7 days prior to the start of the training will be liable for 50% of thetraining cost.

Full Payment needs to be received by Chempute Software prior to the training.

In case of insufficient delegates for the training, Chempute Software may cancel this course.

In this case, registered delegates will be notified and any payments will be refunded

Born in Zambia in 1957, Alan Stewart has been involved in Pipe Stress Analysis

work for many years. He attended lectures in Finite Element Stress Analysis and

General Stress/Strain theory at Wits University - 1984. Later, he attended formal

CAESAR training conducted by Rex Evans (co-founder of Coade), followed by train-

ing in FE/Pipe by Tony Paulin (co-founder of Coade and Paulin Research Group),

and Advanced Caesar training by Dave Diehl (head of training at Coade).

Alan has been presenting CAESAR training courses for Chempute Software for

nearly 20 years, during which time he has presented around 50 training courses in

both Basic and Advanced Topics, in South Africa, Nigeria, Kuwait, UAE, and Saudi

Arabia.

He is a pipe stress consultant to Power Generation, Petro Chemical and other industries

Meet our Presenter - Alan Stewart

Delegates Information:

Title Mr Mrs Ms Other

First Name Surname

Occupation Company

Cell Tel

Email

Special Dietary Requirements:

Billing Information:

Full Company Name

VAT Registration Number

Full Address (To which invoice must be sent):

Procurement / Accounts Contact Information:

First Name Surname

Cell Tel

Email

EN13480 Course (3 CPD): Cost of Course:

1st Delegate R 9 900 Excl. VAT

2nd / Additional Delegates from same Company Less 10 %

I have read and agreed to all the conditions of enrolment and payment as stipulated in this registration form:

Signature: Date:

Registration form

Course Name: Dates: Metallic Industrial Piping design rules according to EN13480

Course Time: 8:00 am - 4:30p.m

14-16 September 2020

Duration 3 Days (3 CPD)

Location:

Chempute Software / Unit G14

Pinewood Office Park, Pinewood Square,

33 Riley road,

Woodmead, Sandton

COVID-19 QUESTIONNAIRE & DECLARATION

Name: Contact numbers: Department: ID Number: Company Contact Number: Age:

1. Please answer yes or no to the question and where

the answer is yes, please answer in the comments column. Yes No Comments

Have you been travelling internationally?

Have you been in contact with someone who has travelled internationally? IF Yes, answer below:

Have you been in contact with a laboratory to confirm a case of COVID-19?

Have you been in contact with a person that is a confirmed COVID-19 case or is currently awaiting test results for COVID-19?

2. Have you had the following symptoms in the past 2 weeks? Yes No Comments

Temperature of 37.3°C or above, loss of smell or taste?

Flu like symptoms

Sore throat or diarrhea

Shortness of breath

Pneumonia

Muscle pain or chills

Headaches or vomiting

Redness of eyes

Fatigue, weakness or tiredness

Do you have any chronic diseases?

Do you have any underlying illnesses?

I (full names) ___________________________________________ ID number _______________________________ declare that the information

provided above is true and accurate.

(Chempute Software employees) I will also inform management immediately in the event that I experience any of the

above-mentioned symptoms whilst at work or at home.

Signature: _________________________________ Date: ______________________________

Directions from Pretoria to 33 Riley Road, Woodmead, Sandton

T

Directions from Northern Side to 33 Riley Road, Woodmead,

Sandton Take Witkoppen Rd and Riley Rd in Woodmead

T

Direction to the Venue 33 Riley road, Woodmead, Sandton, Pinewood Square, Pinewood Office Park — Chempute Software, Unit G14