160328-수산중공업-영문 카탈로그-최종

SOOSAN PRODUCT LINE-UPPOWER TO SUCCESS

w w w . s o o s a n . c o . k r

Head office / Hwaseong Factory260, Jeongmunsongsan-Ro, Yanggam-Myeon, Hwaseong-Si, Gyeonggi-Do, Korea TEL +82-31-350-5273 FAX +82-31-350-5259

Soosan ChinaSoosan Machinery (Qingdao) Co., Ltd.North of Keyun-Road, East of Zhengyuan-Road, Qingdao National High-Tech Industrial Development Zone, Qingdao, Shandong Province, ChinaTEL +86-532-8796-5655 FAX +86-532-6868-2362

Soosan Machinery & Equipment (Xiamen) Co., Ltd.23 Rixin-Road, XingLin-District, Xiamen-City, FuJian-Province, ChinaTEL +86-592-621-1230 FAX +86-592-621-3231

Soosan EuropeOhmweg 18, 3208 KE, Spijkenisse, NetherlandsTEL +31-181-64-7194 FAX +31-181-64-1038

Soosan DubaiP.O. BOX : 262280, LOB14-313 Jebel Ali Free Zone, Dubai, UAETEL +971-4-881-0502 FAX +971-4-881-0503

Soosan USA Inc.1261 Wiley Rd Unit B Schaumburg, IL 60173TEL +847 744 5982 FAX +847 890 6278

Regional Contact PointAsia : [email protected], Oceania : [email protected], CIS : [email protected] East : [email protected] : [email protected] : [email protected], Central, South America : [email protected]

02 03SOOSAN PRODUCT LINE-UP

BREAKER – SB Compact-range BREAKER – SB TR-F Series

• Superb performance with high impact power, durability and reliability• Light weight, low working height and wide working range - Quick and easy to connect to your backhoe

FEATURES FEATURES

• Highest power to weight ratio• Reinforced with Hardox steel plate• Fewer components, less maintenance• Vibration dampening system ; - Dual recoil-absorbing urethane cushions - Operator-friendly with low vibration

Description Unit SB40ⅡBH SB43Ⅱ BH(Non-silenced type)

SB40Ⅱ BH SB43Ⅱ BH(Silenced type)

Operating weight kg 247 341 289 392

Carrier weight ton 4.0 ~ 7.0 6.0 ~ 9.0 4.0 ~ 7.0 6.0 ~ 9.0

Height mm 1,459 1,677 1,463 1,736

Required oil flow ℓ/min 40 ~ 70 50 ~ 90 40 ~ 70 50 ~ 90

Operating pressure bar 110 ~ 140 120 ~ 150 110 ~ 140 120 ~ 150

Impact rate bpm 500 ~ 900 400 ~ 800 500 ~ 900 400 ~ 800

Tool diameter mm 68 75 68 75

• BACKHOE series

[A type]

[B type]

Description Unit SB10Ⅱ SB20Ⅱ SB30Ⅱ SB40Ⅱ SB50

Operating weightA type / B type kg 76 / 95 95 / 112 131 / 144 298 / 292 739 / 892

Carrier weight ton 0.8 ~ 2.5 1.2 ~ 3.0 2.5 ~ 4.5 4.0 ~ 7.0 11.0 ~ 16.0

HeightA type / B type mm

1,072 / 1,150

1,190 / 1,254

1,287 / 1,313

1,616 / 1,602

- / 2,358

Required oil flow ℓ/min 15 ~ 30 20 ~ 40 25 ~ 50 40 ~ 70 80 ~ 110

Operating pressure bar 90 ~ 120 90 ~ 120 90 ~ 120 110 ~ 140 150 ~ 170

Impact rate bpm 800 ~ 1,400 700 ~ 1,200 600 ~ 1,100 500 ~ 900 450 ~ 630

Tool diameter mm 40 45 53 68 100

• Top series (A type : Pin mounted / B type : Top cap mounted)

TECHNICAL DATA

TECHNICAL DATADescription Unit SB50 TR-F SB60 TR-F SB70 TR-F SB81 TR-F SB100 TR-F

Operating weight kg 960 1,330 1,544 1,830 2,065

Carrier weight ton 11 ~ 16 15 ~ 18 16 ~ 21 18 ~ 26 25 ~ 30

Height mm 2,420 2,599 2,691 2,818 3,047



Impact rate bpm 450 ~ 630 350 ~ 650 350 ~ 600 350 ~ 500 300 ~ 450

Tool diameter mm 100 125 135 140 150

Description Unit SB121 TR-F SB130 TR-F SB147 TR-F SB157 TR-F SB200 TR-F

Operating weight kg 2,781 2,996 3,214 4,112 6,613


Height mm 3,215 3,392 3,512 3,786 3,740

Required oil flow ℓ/min 170 ~ 240 190 ~ 250 200 ~260 210 ~ 290 400 ~ 500


Impact rate bpm 320 ~ 450 250 ~ 370 200 ~ 350 150 ~ 250 200 ~ 300

Tool diameter mm 155 165 165 175 210


BREAKER SB TS-P Series

Description Unit SB10Ⅱ TS-P SB20Ⅱ TS-P SB30Ⅱ TS-P SB35Ⅱ TS-P SB40Ⅱ TS-P SB43Ⅱ TS-P SB45 TS-P SB50 TS-P

Operating weight kg 99 128 158 224 294 366 571 861

Carrier weight ton 0.8 ~ 2.5 1.2 ~ 3 2.5 ~ 4.5 3 ~ 5.5 4 ~ 7 6 ~ 9 7 ~ 14 11 ~ 16

Height mm 1,135 1,213 1,317 1,472 1,620 1,899 2,161 2,316

Required oil flow ℓ/min 15 ~ 30 20 ~ 40 25 ~ 50 30 ~ 60 40 ~ 70 50 ~ 90 60 ~ 100 80 ~ 110

Operating pressure bar 90 ~ 120 90 ~ 120 90 ~ 120 100 ~ 130 110 ~ 140 120 ~ 150 130 ~ 160 150 ~ 170

Impact rate bpm 800 ~ 1,400 700 ~ 1,200 600 ~ 1,100 500 ~ 1,000 500 ~ 900 400 ~ 800 400 ~ 800 450 ~ 630

Tool diameter mm 40 45 53 60 68 75 85 100

Description Unit SB60 TS-P SB70 TS-P SB81 TS-P SB100 TS-P SB121 TS-P SB130 TS-P SB147 TS-P SB157 TS-P

Operating weight kg 1,297 1,500 1,766 2,071 2,632 2,833 3309 4085.5

Carrier weight ton 15 ~ 18 16 ~ 21 18 ~ 26 25 ~ 30 28 ~ 35 30 ~ 45 28 ~ 45 40 ~ 55

Height mm 2,592 2,682 2,813 3,063 3,215 3,392 3,605.5 3,786

Required oil flow ℓ/min 90 ~ 120 100 ~ 150 120 ~ 180 140 ~ 190 170 ~ 240 180 ~ 260 200 ~ 260 210 ~ 290

Operating pressure bar 150 ~ 170 160 ~ 180 160 ~ 180 160 ~ 180 160 ~ 180 170 ~ 190 160 ~180 160 ~ 190

Impact rate bpm 350 ~ 650 350 ~ 600 350 ~ 500 300 ~ 450 300~450 250 ~ 400 250 ~ 350 200 ~ 350

Tool diameter mm 125 135 140 150 155 165 165 175

• High-efficiency “SB” percussion system• Fully enclosed housing with Hardox reinforced steel plate• Vibration and noise dampening system - Urethane cushions and wear plates - Operator-friendly : ess recoil and less noise

• Auto greasing connection from SB60 TS-P• Valve adjuster for impact rate control from SB60 TS-P• Fewer components, less maintenance

FEATURES

TECHNICAL DATA


TECHNICAL DATA

BREAKER – SQ Series MINI CRUSHER

MULTI CRUSHER

• Premium quality materials• Integrated Power Control & Anti-Blank Hammering system• Enhanced performance, productivity and durability• Reduced noise level• Robust housing with dust protector

• Speed-up valve is mounted to increase operation speed• 360˚ mechanical rotation system

Description Unit SQ60 SQ70 SQ80 SQ100 SQ120

Operating weight kg 1,607 1,759 2,053 2,185 2,671


Height mm 2,561 2,656 2,806 2,924 3,168



Impactrate

H-modebpm

350 ~ 650 350 ~ 600 350 ~ 500 300 ~ 450 300 ~ 450

L-mode 600 ~ 850 500 ~ 850 500 ~ 700 430 ~ 580 430 ~ 580

Tool diameter mm 125 135 140 150 155

Description Unit SQ130 SQ140 SQ150 SQ180

Operating weight kg 3,033 3,169 3,950 5,850

Carrier weight ton 30 ~ 45 30 ~ 45 40 ~ 55 50 ~ 90

Height mm 3,360 3,441 3,677 3,958

Required oil flow ℓ/min 180 ~ 240 200 ~ 260 210 ~ 290 300 ~ 400

Operating pressure bar 160 ~ 180 160 ~ 180 160 ~ 180 160 ~ 180

Impactrate

H-modebpm

250 ~ 400 200 ~ 350 200 ~ 350 150 ~ 250

L-mode 380 ~ 550 300 ~ 500 320 ~ 470 400 ~ 500

Tool diameter mm 165 165 175 197

FEATURES

FEATURES

• Bolt-on teeth and blades : Easy replacement• Double hydraulic cylinders• Wide jaw opening

FEATURES

Description Unit SMC02 SMC03 SMC05 SMC10Weight, excl. mounting bkt kg 235 318 515 1,220

Carrier weight ton 1.5 ~ 3 2.5 ~ 4.5 4.5 ~ 8 10 ~ 14Max. jaw open mm 387 433 596 750Height at open mm 1,097 1,024 1,357 1,900

Crushing force (outer tooth) ton 26 34 32 45Cutting force (blade center) ton 74 76 105 120

Blade length mm 90 90 120 160Oil flow ℓ/min 60 ~ 80 80 ~ 100 90 ~ 110 70 ~ 130

Operating pressure bar 210 250 250 320Rotation ˚ Hydraulic 360˚

TECHNICAL DATA

Description Unit SMC250-RG SMC300-RGWeight, excl. mounting bkt kg 1,750 2,450

Carrier weight ton 18 ~ 25 25 ~ 36Max. jaw open mm 900 950Height at open mm 1,956 2,190

Crushing force (outer tooth) ton 70 80Cutting force (blade center) ton 225 275

Blade length mm 180 180Oil flow ℓ/min 180 ~ 250 180 ~ 300

Operating pressure bar 320 320Rotation ˚ Hydraulic 360˚

Description Unit SMC250-RD SMC300-RDWeight, excl. mounting bkt kg 1,800 2,500

Carrier weight ton 18 ~ 25 25 ~ 36Max. jaw open mm 800 900Height at open mm 1,907 2,276

Crushing force (outer tooth) ton 70 80Cutting force ( blade center) ton 200 235

Blade length mm 180×2 180×2Oil flow ℓ/min 180 ~ 250 180 ~ 300

Operating pressure bar 320 320Rotation ˚ Hydraulic 360˚

TECHNICAL DATA


PULVERIZER

DEMOLITION GRAB

• 4 times rotatable cutting blades for repetitive use • Replaceable jaw pad for short downtimes and easy maintenance• Abrasion resistance teeth (Hardox) : Reinforced, durable and robust structure

Description Unit SRG100 SRG200 SRG250 SRG400Weight, excl. mounting bkt kg 750 1,158 1,220 1,800

Carrier weight ton 8 ~ 15 10 ~ 18 13 ~ 25 24 ~ 35Max. jaw open mm 1,793 2,080 2,183 2,429Height at open mm 1,117 1,284 1,302 1,534

Crushing force (outer tooth) ton 3.5 5 6 7Shell volume ℓ 380 500 650 950

Oil flow (cylinders) ℓ/min 40 ~ 80 60 ~ 100 60 ~ 100 100 ~ 180Oil flow bar 300 320 320 320Rotation ˚ Hydraulic 360˚

TECHNICAL DATA

Description Unit Posher200 Posher300Weight, excl. mounting bkt kg 1,850 2,630

Carrier weight ton 18 ~ 25 25 ~ 36Max. jaw open mm 855 1,004Height at open mm 540 580

Crushing force (outer tooth) ton 70 88Cutting force (blade center) ton 200 267

Blade length mm 220 220Oil flow ℓ/min 180 ~ 250 180 ~ 300

Operating pressure bar 320 320

TECHNICAL DATA

FEATURES

• Wide jaw open and easy maintenance • Fast duty cycles to increase the work efficiency• FEM-optimized robust structure of wear parts and stress points of

frame and jaws are made of Hardox 400 & 500

FEATURES

MULTI PROCESSOR

• Fully automatic safety system• Multi-function with various jaw sets (option)• High durability and robust structure

FEATURES

TECHNICAL DATADescription Unit SUP25-RC SUP30-RC SUP40-RC

Weight, excl. mounting bkt kg 1,823 2,540 4,000Carrier weight ton 18 ~ 25 25 ~ 36 35 ~ 50Max. jaw open mm 804 1,046 1,250Height at open mm 1,961 2,350 2,700

Crushing force (outer tooth) ton 82 81 130Cutting force (blade center) ton 202 250 368

Blade length mm 180 200 260Oil flow ℓ/min 180 ~ 250 180 ~ 300 240 ~ 350

Operating pressure bar 320 320 350Rotation ˚ Hydraulic 360˚

Description Unit SUP25-RS SUP30-RS SUP40-RSWeight, excl. mounting bkt kg 1,870 2,640 4,050

Carrier weight ton 18 ~ 25 25 ~ 36 35 ~ 50Max. jaw open mm 415 611 695Height at open mm 1,958 2,457 2,775


Blade length mm 160×2 (L)186×1 (R)

180×3, 95×1 (L)180×3, 106×1 (R)

320×2 (L)360×2 (R)

Oil flow ℓ/min 180 ~ 250 180 ~ 300 240 ~ 350Operating pressure bar 320 320 350

Rotation ˚ Hydraulic 360˚Description Unit SUP25-RP SUP30-RP SUP40-RP

Weight, excl. mounting bkt kg 1,920 2,810 4,250Carrier weight ton 18 ~ 25 25 ~ 36 35 ~ 50Max. jaw open mm 750 1,045 1,170Heigh at open mm 1,948 2,358 2,700


Blade length mm 180 200 200Oil flow ℓ/min 180 ~ 250 180 ~ 300 240 ~ 350

Operating pressure bar 320 320 350Rotation ˚ Hydraulic 360˚


FEATURES

LINE-UP

TELESCOPIC BOOM TYPE CRANE TELESCOPIC BOOM TYPE CRANE

• One stop solution for loading, carrying, unloading and lifting works• Excellent lifting capacity, economical, durability, easy to operate, and

complete safety systems• Adoption of a high-tension hexagonal boom & application of a double

derrick cylinder• Winch guide roller is standard adopted that help increase the work

efficiency and safety

Description Unit SCS 263 SCS 323 SCS 324 SCS 333 SCS 334

Capacity

Max. lifting capacity ton·m 4.2 8.2 8.0 8.2 8.0 Max. lifting height m 8.0 9.5 11.8 9.6 11.9Max. working radius m 6.2 7.4 9.7 7.4 9.7Max. working height m 8.2 10.0 12.3 10.1 12.4

Boom Type / Section Penta / 3 Penta / 3 Penta / 4 Penta / 3 Penta / 4Extending speed m / sec 3.7 / 11 4.4 / 14 6.6 / 14 4.4 / 14 6.6 / 14Raising speed ° / sec 1 ~ 80 / 7 1 ~ 80 / 9

Winch Hook speed m / min (Layer/Line)

17 (4/3) 17 (4/4)

Wire rope ø mm / m ø8 x 33m ø8 × 80m [6xFi(29)IWRC]

Slewing Slewing range 360° continuousSlewing speed rpm 2Type Hydraulic motor driven, worm and spur gear reduction

Outrigger Type Front Horizontal manual Fully hydraulic

Rear Option OptionMax. expanded span m 3.12 3. 88 4.09

Hydraulic system

Rated flow ℓ / min 37 50Rated pressure kgf / cm2 200 200Oil tank capacity ℓ 34 50

Applicable chassis ton 2.5 ~ 3.5 4.5 ~ 8.0

Option

Aux. boom (3m, Single-stage, folding type) Aux. boom (5m, Double-stage, folding type) Aux. boom (4m, Single-stage, folding type) Aux. winch (Single line pull : 800kgf) Aux. winch (Single line pull : 1500kgf) Overloading prevention device ● ● ● ● ●

Remote control (wire / wireless) ● ● ● ● ●

Single line hook (800kgf) ● ● ● ● ●

Single line hook (1500kgf) Single line hook (2000kgf) Overwinding alarm device ● ● ● ● ●

Top seat Rear outrigger Manual Manual, HydraulicMiddle outrigger Top seat engine starting device Oil cooler

Safety devices

Pressure relief valve for hydraulic circuit, overcenter valve, hydraulic swing locking system, automatic mechanical brake for winch, pilot check valve for outriggers, hook safety latch, boom angle indicator with load indicator, overwinding alarm system (option), overloading prevention device (option)

TECHNICAL DATA

Lifting Capacity (kg at meter) 2200/1.9 1660/2.5 910/4.4 540/6.2

SCS263


SCS323

Lifting Capacity (kg at meter) 3200/2.6 2340/3.1 1350/5.3 800/7.5 600/9.7

SCS324


SCS333

Lifting Capacity (kg at meter) 3200/2.6 2340/3.1 1350/5.3 800/7.5 600/9.7

SCS334

• Light duty cranes : 2.2 ton ~ 5 ton class Applicable truck chassis : payload 2.5 ton~11 ton• Medium duty cranes : 6 ton ~ 7.6 ton class Applicable truck chassis : payload 5 ton and above• Heavy duty cranes : 10 ton ~ 20 ton class Applicable truck chassis : payload 11 ton and above ※ The above specifications are subject to change without prior notice for improvement.


Description Unit SCS 335 SCS 513 SCS 505 SCS 506 SCS 736 SCS 736L Ⅱ SCS 744L SCS 746L SCS 747L

Capacity

Max. lifting capacity ton·m 7.7 11 14.1 13.9 15.0 15.0 20 17.5 17.5Max. lifting height m (Aux. boom) 14.2 10.1 15.4 17.7 17.4 (22.4) 20.8 (25.8) 16.1 21.8 (26.8) 24.5 (29.5)Max. working radius m (Aux. boom) 12.1 8 13.1 15.5 15.4 (20.4) 18.8 (23.8) 13.8 19.6 (24.6) 22.3 (27.3)Max. working height m (Aux. boom) 14.9 10.8 16.1 18.5 18.1 (23.1) 21.5 (26.5) 16.9 22.6 (27.6) 25.2 (29.2)

Boom Type / Section Hexa / 5 Square / 3 Hexa / 5 Hexa / 6 Hexa / 6 Hexa / 4 Hexa / 6 Hexa / 7Extending speed m / sec 8.68 / 23 4.8 / 17.5 11.8 / 22 11.78 / 30 14.5 / 30 7.36 / 16 15.1 / 33 17.5 / 36Raising speed ° / sec 1 ~ 80 / 9 1.5 ~ 75 / 10 1 ~ 80 / 11 1 ~ 76 / 15 1 ~ 80 / 12

Winch Hook speed m / min

(Layer/Line) 17 (4/4) 10 (4/6) 15 (4/3) 14 (4/4)

Wire rope ø mm / m ø8 × 80m [6 x Fi(29)IWRC]

ø8 x 70 [6 x Fi(29)IWRC] ø8 × 100 mm [6xFi(29)IWRC] ø10 x 120m

Slewing Slewing range 360° continuous 360° continuousSlewing speed rpm 2 2Type Hydraulic motor driven, worm and spur gear reduction Hydraulic motor driven, worm and spur gear reduction

Outrigger Type

Front Fully hydraulic Horizontal Manual Fully hydraulic Fully hydraulic Fully hydraulic

Rear Option Option Option Option Fully hydraulic, double box typeMax. expanded span m 4.09 4.0 5.3 5.3 5.35 5.6

Hydraulic system

Rated flow ℓ / min 50 65 66 66 65Rated pressure kgf / cm2 200 190 200 200

Oil tank capacity ℓ 50 50 90 90 90 120 120Applicable chassis ton 4.5 ~ 8.0 5.0 ~ 11.5 4.5 ~ 11.5 5.0 and above 7.5 and above

Option

Aux. boom (3m, single-stage, folding type) ● ● ● ● ●

Aux. boom (5m, double-stage, folding type) ● ● ● ● ●

Aux. boom (4m, single-stage, folding type) Aux. winch (Single line pull : 800kgf) Aux. winch (Single line pull : 1500kgf) ● ● ● ● ●

Overloading prevention device ● ● ● ● ● ● ● ● ●

Remote control (wire/wireless) ● ● ● ● ● ●

Single line hook (800kgf) ● ● ● ●

Single line hook (1500kgf) ● ● ● ● ●

Single line hook (2000kgf) ● ● ● Overwinding alarm device ● ● ● ● ● ● ● ● ●

Top seat ● ● ● ● ●

Rear outrigger Manual, hydraulic Manual Manual, hydraulic ● ● ● ● ●

Middle outrigger Top seat engine starting device ● ● ● ● ●

Oil cooler ● ● ● ● ●

Safety devices Pressure relief valve for hydraulic circuit, overcenter valve, hydraulic swing locking system, automatic mechanical brake for winch, pilot check valve for outriggers, hook safety latch, boom angle indicator with load indicator, overwinding alarm system (option), overloading prevention device (option)

TECHNICAL DATA

Lifting Capacity (kg at meter)

SCS736


SCS736LⅡ


SCS746L


SCS744L


SCS747L

5300/2.0 3400/3.2 1890/5.6 1200/8.0Lifting Capacity (kg at meter)

SCS513

5200/2.5 3400/3.6 2200/6.0 1300/8.4 1010/10.7 820/13.1Lifting Capacity (kg at meter)

SCS505

5000/2.5 3500/3.7 1900/6.1 1270/8.5 960/10.8 760/13.1 620/15.5Lifting Capacity (kg at meter)

SCS506


SCS3353200/2.5 2250/3.4 1280/5.7 750/7.8 550/10.0 290/12.1

TELESCOPIC BOOM TYPE CRANE

6000/2.6 4020/3.6 2460/6.0 1600/8.4 1010/10.8 730/13.1 610/15.4

6000/2.5 3700/4.3 1940/7.2 1190/10.2 720/13.0 490/15.9 350/18.8

7000/2.4 3800/4.5 2050/7.5 1200/10.6 800/13.6 550/16.6 400/19.6

7000/2.7 4000/4.5 2200/7.6 1350/10.7 950/13.8

7000/2.4 3310/4.8 1620/7.7 910/10.7 600/13.6 380/16.5 280/19.4 210/22.3

※ The above specifications are subject to change without prior notice for improvement.



SCS866LS7000/2.4 3635/4.5 2175/7.5 1360/10.6 915/13.6 630/16.6 435/19.6


SCS8867600/2.0 4200/4.4 2150/7.5 1400/10.6 1000/13.6 800/16.6 600/19.6


SCS867LS7000/2.4 3725/4.8 2045/7.7 1280/10.7 855/13.6 580/16.5 385/19.4 240/22.3


SCS8877600/2.0 4500/4.8 2250/7.8 1400/10.7 1000 /13.6 720/16.5 520/19.4 440/22.3

Description Unit SCS 866LS SCS 867LS SCS 886 SCS 887 SCS 1015LS SCS 1024LS SCS 1616 SCS 2016

Capacity

Max. lifting capacity ton·m 17.5 17.5 21 21 36.0 36 53.8 65.0 Max. lifting height m (Aux. boom) 21.8 (26.8) 24.5 (29.5) 21.8 (26.8) 24.5 (29.5) 23 (27) 19.3 30.1 (35.1) 32.2 (37.2)Max. working radius m (Aux. boom) 19.6 (24.6) 22.3 (27.3) 19.6 (24.6) 22.3 (27.3) 20.7 (24.9) 16.9 27.1 (32.1) 30.2 (35.2)Max. working height m (Aux. boom) 22.6 (27.6) 25.2 (30.2) 22.6 (27.6) 25.2 (30.2) 24.5 (28.5) 20.3 31.1 (36.1) 33.7 (38.7)

Boom Type / Section Hexa / 6 Hexa / 7 Hexa / 6 Hexa / 7 Hexa / 5 Hexa / 4 Hexa / 6Extending speed m / sec 15.1 / 33 17.5 / 36 15.1 / 33 17.5 / 36 15.1 / 40 20.4 / 45 21.5 / 55Raising speed ° / sec -16° ~ 79°/15 0 ~ 81 / 20 81 / 15 -12 ~ + 80 / 40 -11 ~ + 80 / 30

Winch Hook speed m / min (Layer/

Line) 14 (4/4) 13~23 (4/4) 9.2 ~16 (4/4)

Wire rope ø mm / m ø10 × 120 mm ø14 x 100m ø14 x 120m

Slewing

Slewing range 360° Continuous 360° continuousSlewing speed rpm 1.8 2 1.8 ~ 2.0 1.8

Type Hydraulic motor driven, worm and spur gear reduction Hydraulic motor driven, worm and planetary gear reduction

Hydraulic motor driven, worm and spur gear reduction

Hydraulic motor driven, worm and planetary gear reduction

Hydraulic motor driven, planetary gear reduction

Outrigger Type

Front Fully hydraulic, Double box type Double box H-type Fully hydraulic (2 section)Rear Fully hydraulic, Double box type Fully hydraulic, Double box type

Max. expanded span m Front : 6.0, Rear : 4.3 6.18 7.4 Hydraulic System

Rated flow ℓ / min 65 100 x 100Rated pressure kgf / cm2 200 210 210

Oil tank capacity ℓ 170 250 270

Applicable chassis ton 7.5 and above 11.0 and above 19.0 and above (4-wheel steering)

25.0 and above (4-wheel steering)

Option

Aux. boom (3m, single-stage, folding type) ● ● ● ●

Aux. boom (5m, double-stage, folding type) ● ● ● ●

Aux. boom (4m, single-stage, folding type) ● ● ● ●

Aux. winch (Single line pull : 1500kgf) Aux. winch (Single line pull : 3000kgf) ● ● ● ●

Aux. winch 2-speed (Single line pull : 2000kgf) ● ● ● ●

Aux. winch 2-speed (Single line pull : 3000kgf) ● ● ● ●

Aux. winch : BG8 (Single line pull : 2.2~3.2ton) ● ● ● ●

Aux. winch : PD12C (Single line pull : 2700~4100kgf(high)) ● ● ● ●

Overloading prevention device ● ● ● ● ● ● ● ●

Remote control (wire/wireless) ● ● ● ● ● ● ●

Single line hook (800kgf) Single line hook (1500kgf) ● ● ● ●

Single line hook (2000kgf) ● ● ● ●

Overwinding alarm device ● ● ● ● ● ● ● ●

Top seat STD STD STD STD STD ● STD STDRear outrigger ● ● ● ● ● ● ● ●

Middle outrigger ● ● ●

Top seat engine starting device ● ● ● ● ● ● ● ●

Oil cooler ● ● ● ● ● ● ● ●

Safety devices Pressure relief valve for hydraulic circuit, overcenter valve, hydraulic swing locking system, automatic mechanical brake for winch, pilot check valve for outriggers, hook safety latch, boom angle indicator with load indicator, overwinding alarm system (option), overloading prevention device (option)

TECHNICAL DATA



SCS1015LS10000/3.0 6000/5.6 3100/9.4 1950/13.1 1400/16.9 1030/20.7


SCS1024LS10000/3.0 6100/5.7 3340/9.4 2350/13.2 1780/16.9


SCS161615000/2.0 8300/6.5 4300/10.6 2740/14.5 2030/18.9 1570/23.0 1250/27.3


SCS201620000/2.0 8880/7.0 4900/11.7 2960/16.3 2175/21.0 1710/25.6 132/30.2



ARTICULATED BOOM TYPE CRANEOPTION

A combination of versatile boom geometry and hydraulic attachments (such as orange grapples, brick-stone grapples, pallet fork lifts) makes the crane ideal for various material handling jobs including waste and scrap recycling, military logistics, public utilities etc.

FEATURES

TECHNICAL DATA

* Sa fe t y package i s cons i s t ed o f overloading prevention system, over winding alarm device, braking system in the slewing mechanism, wire rope retaining roller, temperature sensor, filter pollution intensity indicator, uncoiling limiter for winch cable, inclinometer

Wire rope retaining rollerTo prevent wire from getting twisted or un-coiling when wire is touched by the ground or pay-load, retaining roller installed in wire drum.

JibAuxiliary boom for increasing the working range.

Auxiliary winchAuxiliary winch makes work efficiently in various working conditions.

Uncoiling limiter for winch cableIn order to prevent dangerous situations like the falling of a wire of payload, uncoiling limiter is installed in wire drum, and it makes automatically wire stop before entirely coming loose from wire drum.

Slewing locking system* Light duty - self locking system with worm gear* Medium duty - self locking system with worm gear

and external locking cylinder* Heavy duty - self locking system with worm gear

and internal locking cylinder

Overwinding prevention deviceThis safety device automatically stops winch hoist-ing, boom extension and boom elevation when the hook block approaches the boom head.

Overloading prevention deviceThis safety device automatically stops winch hoist-ing, boom extension and boom elevation when the load exceeds the load limits.

Rear outriggerFor a wide working range and better stability on an uneven ground or slope

Radio remote controllerProportional remote control system enables ac-curate operation performed at a safe distance.


Description Unit SCK 1213 SCK 1613

Max. lifting capacity ton/m 11.7 16

Max. working radius m 8 9.2

Max. working height m 10.3 11.5

Payload capacity kgf

2,540 / 4.6 2,600 / 6.0

1,830 / 6.3 2,010 / 7.6

1,300 / 8.0 1,600 / 9.2

Slewing range ° 400 415

Slewing speed °/s 30 30

Rated flow cc/rev 63 80

Outrigger span m 4.6 5.2

Grab capacity ㎥ 0.4 0.4


CRAWLER DRILL

• Simple and easy control with joysticks• High quality straight holes• Simplified rod changing system with trommel magazine• ROPS-FOPS certified safety cabin• Wide drilling coverage area• Optimal power unit with load sensing hydraulic pump system• Advanced intelligent drilling system

TECHNICAL DATA

DescriptionSTD11E

(Electronic type)

STD11M(Mechanical

type)

STD 11T(For tunnel application)

STD14E(Electronic

type)

STD14M(Mechanical

type)

Hole range 64 ~ 89 mm 45 ~ 76 mm 76 ~ 102 mm

Drill steel T38, T45 T45, T51

Rod length 3,660 mm

Hole depth 22 m 25 m - 25 m

Boom variation Extendable boom

Rock drill TD45, 15 kW TD45T, 10 kW TD51, 20 kW

On-board compressor 5.7 m3 / min 9.0 m3 / min

Dust collector 23 m3 / min

Diesel engine160 Hp (119 kW),

Cummins QSB6.7, Tier3

173Hp (129 kW), Cummins 6B5.9,

Tier2

160 Hp (119 kW), Cummins QSB6.7,

Tier3

220 Hp (164 kW), Cummins QSB6.7,

Tier3

260Hp (194 kW), Cummins 6C8.3,

Tier2

Safety cabin ROPS & FOPS (Certified)

Dimension (transport)

Weight 12,890 kg 12,900 kg 11,740 kg 13,280 kg 13,500 kg

Width 2,430 mm

Height 3,150 mm

Length 8,930 mm 8,330 mm 8,930 mm

Control Joystick, electrically controlled

FEATURES


NEW CRAWLER DRILL

• Newly designed cabin with certificate and ergonomic structure• Easy maintenance with engine cover at the top ;• Changed structure of radiator and cooler - Improved internal airflow for efficient cooling

FEATURES

TECHNICAL DATADescription STD 140E

Hole range 76 ~ 102 mm

Drill steel T45, T51

Rod length 3,660 mm

Hole depth 25 m

Boom variation Extendable boom

Rock drill TD51P, 20kW

On-board compressor 9.0 m3 / min

Dust collector 23 m3 / min

Diesel engine 2,200 rpm(164 kW), QSB6.7, Cummins Tier4

Safety cabin ROPS & FOBS (Certified)

Dimension (transport)

Weight 14,000 kg

Width 2,400 mm

Height 31.5 mm

Length 9,415 mm

Control Joystick, electrically controlled


Documents

160328-수산중공업-영문 카탈로그-최종