17194534-Power-Engineering

8/7/2019 17194534-Power-Engineering

1/12

POWER SYSTEMS

ENGINEERING


2/12


3/12

Pressure and non-pressure boiler parts

Nuclear power engineering, steam generators,volume compensators, vessels for transport ofradioactive waste, barbotage vessels, separators

Water power engineering, closures and flapcomponents, stationary turbine parts, powerconduits, manifolds

Equipment for petrochemistry, reactors, heatexchangers

Pressure and non-pressure liquid and gas storagetanks

POWER SYSTEMS

ENGINEERING


4/12

The history of the POWER SYSTEMS ENGINEERING dates back to 1845, which saw it as

a department of the mechanical shop of the Rudolfs Ironwork. Beside the steam boilers,

there appeared boiler drums, spherical tanks, overhead ball-shaped pressure reservoirs,

cylindrical pressure vessels, mounded storage tanks, storage tanks with fix or floating

roofs of 100 m3 to 125,000 m3 in capacity, equipment for blast furnaces and steel works,

pressure pipelines with branches of up to 8 m in diameter, gate pieces for hydro-electric

power plants, installations for chemistry, paper and food-stuff industry.

The mid 70s saw the production expand into the nuclear power engineering, especially like:

various pressure vessels for active and inactive environments of the nuclear power

plants

pressure exchangers ( steam generators) between the primary and secondary circuits

volume compensators

low pressure and high pressure heaters


5/12

reaching

topthe

PARTS OF BOILERS

Boiler drums

Pressure parts of boilers (e.G. Superheaters, economizers) incl. steam-waterheaders, interconnection piping and other piping till to dia 630 mm

Air and waste gases ducts, air heaters


6/12

EQUIPMENT FOR CHEMICAL INDUSTRYPressure and non-pressure tanks

Heat exchangers

Reactors

Absorbers

Columns

STATIONARY PARTS OF TURBINES AND PARTS FOR HYDRO POWER PLANTSWater, steam and gas turbine casings

Inlet and outlet parts of water turbines

Runner casings

Pressure penstocks and distribution branches


7/12

STORAGE TANKSSpherical pressure tanks for storage of liquids and

gases up to 6,000 m3

Cylindrical storage tanks up to 3,000 m3, horizontal,

vertical, pressure, non-pressure, above ground,

embedded, below ground

Cylindrical non-pressure large capacity storage tanks

with single or double shell and bottom, fixed or floating

roof, max. volume 120,000 m3

Wet gas holders up to 100,000 m3

Water reservoirs up to 2,000 m3 with one or two water

tanks


8/12

OTHER INDUSTRIAL PARTS

Blast furnace shells inclusive top cones

Hoppers

Convertor vessels for steelworks

Trunion rings

Spare parts for steelworks

Exhaust parts of conventor vessels

Pot shells and supestructures

Parts of electric arc furmace

PART FOR NUCLEAR POWER PLANTS

Pressure tanks of various types (bubblers, volumecompensators

Pressure exchangers (steam generators) between primaryand secondary circuit

Heat exchangers in the secondary circuit low-pressure,high pressure heaters


9/12

VITKOVICE POWER SYSTEMS ENGINEERING has a built up, described and established

Quality Assurance System acc. to ISO 9001 Standard, certified by RW TV (TV Cert). We

are authorized to manufacture boilers and pressure vessels acc. to AD Merkblatt by RW

TV and acc. to ASME Code Sections I and VIII, Div. 1, 2 by ASME , Welded Boilers and

Welded Pressure Vessels Class. II and II by DNV. Fusion Welded Pressure Vessels Class 1,Group A and B acc to LR rules by Lloyds Register of Shipping. Our company is also

authorized to manufacture pressure parts for nuclear power plants by Czech authorities.

We are a Grosser Eignungsnachweis holder for steel structures welding (issued by SLV

Berlin). VITKOVICE POWER SYSTEMS ENGINEERING is a China license holder for boilers

pressure parts manufacturing.

Quality Control is established and inspections are performed by the QC Department staff at

all levels of manufacturing cycle in accordance with the QA Manual and Quality procedures.

To meet the scope of required quality parameters, we adopted the recent methods for

NDE, for testing of mechanical properties of materials as well as for metallographic

examinations.

In addition to the internal system of controlling compliance, the technology procedures and

quality requirements examination are also carried out by the Notified Bodies, by the state

Professional Supervision or by customers Supervisors.

reaching

topthereachingtopthe


10/12

The products are manufactured and certified in

accordance with valid international standards.


11/12

Rusk 2887/101, 706 02 Ostrava-Vtkovice, Czech Republic

Phone: +420 595 957 131, Fax: +420 595 956 194

E-mail: [email protected]


12/12

Documents

17194534-Power-Engineering