19” LCD Color Monitor AOC LM960s

  • View
    76

  • Download
    8

Embed Size (px)

Text of 19” LCD Color Monitor AOC LM960s

  • 19 LCD Color Monitor AOC LM960s

    1

    Service Service Service

    Horizontal Frequency 30 KHz-83 KHz

    TABLE OF CONTENTS

    Description Page Description Page

    SAFETY NOTICE

    ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS

    AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC

    EQUIPMENT CONTAINING HIGH VOLTAGES.

    Table Of Contents...........................................1

    Important Safety Notice..........................2

    Revision List...............................................3

    1.Product Feature......................................4

    2.LCD Monitor Description.......5

    3.Operation Instruction..........................6

    3.1 General Instructions..................................................6

    3.2 Control Buttons................................6

    3.3 Adjusting the Picture.......................................8

    4.Input/Output Specification........................10

    4.1 Input Signal Connector..........................10

    4.2 Factory Preset Display Modes..............................10

    4.3 Power Supply Requirement....11

    4.4 Panel Specification................................12

    5. Block Diagram....................................16

    5.1 Software Flow Chart............16

    5.2 Electrical Block Diagram............18

    6.Schematic.......................................20

    6.1 Main Board..............................................................20

    6.2 Power Board......................................26

    7.PCB Layout........................................29

    7.1 Main Board......................................29

    7.2 Power Board......................................32

    7.3 Key Board...................................34

    8.Maintainability.....................................35

    8.1 Equipments and Tools Requirement.............35

    8.2 Trouble Shooting..............................35

    9.White-Balance, Luminance adjustment.............41

    10. Monitor Exploded View...............42

    11.BOM List....................................................43

    12.Different Parts List.............................................57

    CAUTION: USE A SEPARATE ISOLATION TRANSFOMER FOR THIS UNIT WHEN SERVICING

    http:/

    /www

    .wjel

    .net

  • 19 LCD Color Monitor AOC LM960s

    2

    Important Safety Notice Proper service and repair is important to the safe, reliable operation of all AOC Company Equipment. The service procedures recommended by AOC and described in this service manual are effective methods of performing service operations. Some of these service operations require the use of tools specially designed for the purpose. The special tools should be used when and as recommended.

    It is important to note that this manual contains various CAUTIONS and NOTICES which should be carefully read in order to minimize the risk of personal injury to service personnel. The possibility exists that improper service methods may damage the equipment. It is also important to understand that these CAUTIONS and NOTICES ARE NOT EXHAUSTIVE. AOC could not possibly know, evaluate and advise the service trade of all conceivable ways in which service might be done or of the possible hazardous consequences of each way. Consequently, AOC has not undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not recommended by AOC must first satisfy himself thoroughly that neither his safety nor the safe operation of the equipment will be jeopardized by the service method selected. Hereafter throughout this manual, AOC Company will be referred to as AOC. WARNING Use of substitute replacement parts, which do not have the same, specified safety characteristics might create shock, fire, or other hazards. Under no circumstances should the original design be modified or altered without written permission from AOC. AOC assumes no liability, express or implied, arising out of any unauthorized modification of design. Servicer assumes all liability. FOR PRODUCTS CONTAINING LASER: DANGER-Invisible laser radiation when open AVOID DIRECT EXPOSURE TO BEAM. CAUTION-Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION -The use of optical instruments with this product will increase eye hazard. TO ENSURE THE CONTINUED RELIABILITY OF THIS PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART NUMBERS IN THE PARTS LIST SECTION OF THIS SERVICE MANUAL. Take care during handling the LCD module with backlight unit -Must mount the module using mounting holes arranged in four corners. -Do not press on the panel, edge of the frame strongly or electric shock as this will result in damage to the screen. -Do not scratch or press on the panel with any sharp objects, such as pencil or pen as this may result in damage to the panel. -Protect the module from the ESD as it may damage the electronic circuit (C-MOS). -Make certain that treatment persons body is grounded through wristband. -Do not leave the module in high temperature and in areas of high humidity for a long time. -Avoid contact with water as it may a short circuit within the module. -If the surface of panel becomes dirty, please wipe it off with a soft material. (Cleaning with a dirty or rough cloth may

    damage the panel.)

    http:/

    /www

    .wjel

    .net

  • 19 LCD Color Monitor AOC LM960s

    3

    Revision List

    Version Date Revision History TPV Model Name

    T982KH4HK4A1NPE

    T982KH4HK4A2NPE

    T982KH4HK4A1ZPE A00 Feb.-07-2007 Initial Release

    T96HM4HQAVA2FE

    http:/

    /www

    .wjel

    .net

  • 19 LCD Color Monitor AOC LM960s

    4

    1. Monitor Specifications

    Driving system TFT Color LCD

    Size 48cm(19") LCD Panel

    Pixel pitch 0.294mm( H ) 0.294mm( V )

    Video R,G,B Analog Interface

    Separate Sync. H/V TTL

    H-Frequency 30kHz 83kHz Input

    V-Frequency 55-75Hz

    Display Colors 16.2M Colors

    Dot Clock 135MHz

    Max. Resolution 1280 1024 @75Hz

    Plug & Play VESA DDC2BTM

    ON Mode

  • 19 LCD Color Monitor AOC LM960s

    5

    2. LCD Monitor Description The LCD monitor will contain a main board, a power board, a key board which house the flat panel control logic,

    brightness control logic and DDC.

    The Inverter board will drive the backlight of panel and DC-DC conversion.

    Monitor Block Diagram

    AC-IN

    100V-240V

    Power Board

    Flat Panel and

    CCFL Backlight

    Main Board

    Key board

    RS232 Connector

    For white balance

    adjustment in factory

    mode

    HOST Computer

    CCFL Drive.

    Video signal, DDC

    http:/

    /www

    .wjel

    .net

  • 19 LCD Color Monitor AOC LM960s

    6

    3. Operating Instructions 3.1 General Instructions

    Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the

    monitor. By changing these settings, the picture can be adjusted to your personal preferences.

    The power cord should be connected. Connect the video cable from the monitor to the video card. Press the power button to turn on the monitor position. The power indicator will light up.

    3.2 Front Panel Control

    External Controls

    1. MENU / ENTER 2. / Contrast

    3. Power Button/ LED 4. / Brightness

    5. Auto Adjust button / Exit

    http:/

    /www

    .wjel

    .net

  • 19 LCD Color Monitor AOC LM960s

    7

    FRONT PANEL CONTROL

    Power Button: Press this button to turn the monitor ON or OFF.

    Power Indicator: Green Power On mode.

    Orange Off mode.

    MENU / ENTER: Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD

    menu when in Brightness/ Contrast Adjust OSD status.

    Brightness / : Adjust brightness or function adjust.

    Contrast / : Adjust contrast or function adjust.

    Auto Adjust button / Exit: 1. When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu).

    2. When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function.

    The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus.

    OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press power

    button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off and

    then press power button to turn the monitor on.

    NOTES

    Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a pl