BREVETII JNTERNAZIONALI

catalogue n. 18

INDEX

THE COMPANYITS PRODUCTSSUPER RECORD road groupRECORD road groupGRAN SPORT road groupSUPER RECORD track group - RECORD track gro upTOURING group980 EQUIPAGGIAMENTO groupGEARS and their characte risticsSUPER RECO RD gearNUOVO RECORD gearRALLY TOURING gearNUOVO GRAN SPORT gear980 gearVALENTINO EXTRA gearFRONT CHANGERSBraze-on SUPER RECORD front changerClip-on SUPER RECORD front changerBraze-on RECORD front changerClip-on RECORD front changerGRAN SPORT front changer980 front changerNUe VO VALENTINO front changerVALENTINO front changerGear and front changer CO NTROL LEVERSCO NTROL LEVERS componentsKIT for frameHUBS setsRECORD road hub componentsRECORD track hub componentsNUOVO llBO hub componentsCHAINWHEEL SETSSUPER RECORD - RECORD ROAD chainwheel set componentsSUPER RECORD - RECORD TRACK chainwheel set componentsGRAN SPORT road chainwheel set componentsTriple chainring and cross chainwheel set componentsBOTIOM BRACKET setsBOTIOM BRACKET componentsHEAD SETSHEAD SETS compo ne ntsPEDALSRECORD and SUPER RECORD pedal componentsGRAN SPORT pedal componentsSet TOE CLIPS and fixing shoe plateSEAT PILLARSETA PILLAR componentsBRAKES SETSPARE PARTS of BRAKES SETFREEWHEELBMXSUNDRY SPARE PARTSTOOL KITSTOOLS CONTAINED IN KITSCAMPAGNOLO SPECIAL TOOLSCHAIN LINEGEAR RATIO TABLE

page45

6-78 -9

10 -1112-13

14151617181920212223242526272829303 132333435363 738

39-40-4 14243444546474849505 152535455

56-5758-59

606 1

62-6364-6566-67

686970

THE COMPANY •

•

1927. Tullio Campagnolo. valid cyclist, punctures during a race on the Croce d 'Aune pass.It is winter time: the cold, the snow and the frozen hands do not perm it him to release the screws that fix the wheelto the frame.Tullio Campagnolo loses the race, but that event is the push of a series of happy intuitions that in a few years radiocally change the bicycle and the cycling sport too.Those t imes are now tar away: today the most famous components in the world are prod uced by a leader Com­pany that entrusts its performances to a valid managerial team, to its technicians' experience.la the qualifications01the employees, to its capacity to change and of updating its range of products.

4

ITS PRODUCTS

•

The vocation of the Company is certain ly the production of bicyc le components: Campagno!o is one of the ve ryfew Companies in the world that manufactures a complete ensemble and the only one that offers a production ofexclusive quality.All the parts as the hubs and the brakes, the gear and the chainset. but especially the sm all components such asthe titan ium screw for the gear and the seasoned rubber hoods lor levers, witness the steady research of theQuality, w hich is meant as safety, aesthetics , simpl icity of solutions. A comp lete range of products which are thesoul of the bicycle and which ennoble and mark it in an unmistakable way.

5

,

•

SUPER RECORD Road Group

4000/F..SUPER RECORD .. Road Campaqnolo Group composed of: 406111 .. Super Record .. brakes set. 01 020 18..Super Record .. gear, 0104010 front changer, 1013/5N~1013/6N braze-on twin levers, 606-608- 617 twincables, 1034 .. Record .. hubs set. 1049/A ..Super Record .. road chatnset. 1046/A ..Nuovo Record .. bottom bra­cket set. 1037/A <t Record .. road superlight pedals set, 4041 .. Super Record- headset. 4051 /1 .. Nuovo SuperRecord .. seat-pin, 0990106 superlight toe-clips set medium size, 1072 seat-pin fixing bolt-nut ¢ 8.

On request the above group can be supplied with .. Super Record .. pedals set with titanium axle.

It is the jewel Group of Campagnolo line. for professionals. balanced to obtain the best results during races.It IS man ufactured wi th aeronautic and space materials (ti tanium and light alloys).The lightness of each compon­ent takes into consideration the satety while rac ing and the stiffness, to have Immediate action during the sprintsand efficiency In c limbing.All the frict ions are reduced to the minimum, w ith surfaces grinded to have a very low roughness.The gear and the front changer are extremely funct ional; also used under stress g ive a sure and smocth perfor­mance.The brakes intervene also in descents covered at 80 km/h., with dry and wet roads. gradually and w ith the rmni­mum effort of the hands, w ithout vibrations and slipping of the wheel on the road .Everything is extremely sliding and silent. accentua ted by the very high handicraft care of the details: it is thegroup of the world Champions.

6

•

. .....;t;.

' ....i

•

•

•

7

•

RECORD Road Group

1032/F«RECORD » Road Campagnolo Group composed of: 2040/1 « Record» brakes set. 1020/ A «Nuevo Record»gear, 0104007 front changer, 1013/5N-l01 3/6N braze -on twin levers, 606-608-617 twin cab les, 1034 «Re­co rd» hubs set, 1049 «Record » road chainset. 10461A <Nuevo Record» bottom bracket set 1037 «Record »road pedals set, 1039 «Record» headset, 1044 «Record» seat-pin,01 10056 fixing shoe p lates set, 1072 seat­pin fixing bolt -nut ¢ 8.

This group has all the ideal characteristics to obtai n the victory during the races, but it has been planned to keepthe effic iency of the bicycle w ith a less specialized assistance. It IS destined 10 professional riders and to the ama­leurs of the sporting cycling.The production of all the components is always balanced to g ive the best performan ces to the riders,exploiting atthe most their agonistic and sporting capac ities.The safety is at the maximu m level even if the bicycle IS not always overhauled before the race.It is a group that lasts long, eithe r aesthetically or functionally ; the care of the details continues during the manu­facturing process and the standards of test at d ifferent stages are very severe; accord ing to Campagnolo level.

8

o

, .." .~..

•

•

•

•

9

GRAN SPORT Road Group

2240/5F •.. GRAN SPORT .. Road Campaqnolo Group com posed of; 117 «Gran Sport .. brakes set, 3500 -Nuovo GranSport .. gear, 0104006 .. Gran Sport .. front changer. 1207/N-1208/N ..Gran Sport .. braze-on tw in levers, 606­608 cables. 617 casing, 1251 ..Nuovo Tipo .. small flange quick release hubs, 0304 .. Gran Sport» chainwheelset and 3331 ..Sport .. bottom bracket set, 1040/A .. Sport .. headset w ith 7300109 washer, 3700 «Gran Sport ..pedals set, 0110056 fixing shoe plates set. 3800 .. Gran Sport .. seat-pin.

The approach to the sophisticated qualities of Campaqnoto product for he who tends for the first time (or almost)to become an amateur of the sporting cycling. is easier when he starts using this group.It has the contents 01the technical evolution of those who have always made components for winning racing bi­cycles; lightness, safety, functionality are in fact looked for w ith the same stubborness as in the" Nuovo Record ..and ..Super Record .. ranges.On said group the same plann ing and executing Campagnolo mentality is expressed with the research of theaesthetics and of the care of details realized with less sophisticated techniques.It is hence a group for amateurs and for young people who can already understand how important it is 10 havefrom their own bicycle high performances, safety and endurance.It is a group in wh ich the project and the raw material used are always of high lechnolog ical level, wi thout savingof material or of process.II is a product that immediately realizes the enthusiasm of pedall ing.

10

• No more available and replaced by the "Victory" range.

•

•

•

o

eo

oo

11

SUPER RECORD Track Group •

4100 .«SUPER RECORD » Track Campagnolo Group composed of: 1036 «Record » track large f lange hubs set, 4151" Super Record .. track chainset. 1046 «Record »track bottom bracket set, 1038 / A «Record» track superlight pe­dals set ,4 141 «Super Record » track headset,4051/1 «Nuevo Super Record» seat-pin, 0990106 superHght toe­cl ips set medium size, 1072 seat-pin fixing bolt -nut ¢ 8.

On request the above group can be supplied with «Super Record .. pedals set.

RECORD Track Group

1033.. RECORD .. Track Campagnolo Group composed of: 1036 «Record » track large flange hubs set. 1051.. Record» track chainset, 1046 .. Record .. track bottom bracket set. 1038 .. Record .. track pedals set. 1040 .. Re­cord .. track headset, 1044 ..Record .. seat-pin, 0110056 fixing shoe prates set. 1012 seat-pin fixing bolt-nut ¢ 8.

12

••

tr,,,,,

,,.;; •••••

•

•

13

TOURING Group

•279«TOURING" group composed of: 5011/06 Rally Touring» gear, 0104012 front change r, 1013/5N-l 013/6Nbraze-on tw in levers , 606-608 cables, 617 casing, 1251 «Nuevo Tfpo » small f lange quick release hubs set,030G/e 116 mm. ch ainwheel set complete with 5031/00 «Gran Sport» bottom bracket set for triple chainring,1040/A ..Sport» headset with 7300109 «Sport» headset washer.

•

oe:•

14

980 EQUIPAGGIAMENTO Group

281,,980 EOUIPAGGIAMENTO " Group composed of: 6011/00 "9aO.. gear, 0104012 front changer, 1207/N­120a/N braze-on twin levers, 606-608 cables. 617 casing, 1251 -Nuovo Tipo »smal l flange quick release hubsset.

•

0 )

•

•

15

GEARS

0102018 «Super Reco rd » gear1020/A «Nu evo Record " gear5011106 «Rally Touring» gear3500 - Nuovo Gran Sport» gear6011/00 -980 - gear2170 ..Va lentino Extra .. gear

•

0102018 1020/A 5011/06 3500 6011 /00 2170

Weightlgrammes 182 199 225 220 200 235

To make a good gear are necessary experience and passion.From the far thirties. Campagnolo plans. tries on the spot, produces and patents new gears.The various versions produced are the synthesis of these 50 years of love for the rac ing bicyc le.The Campagnolo gears always realize the new ratio, also if used while the rider pedals under stress.The working precision and the use of the most proper metals make of it the safest and the most long last ing gear.The cage plate moves remaining always parallel to itself for the arms coupling precision.When it turns to give or pick up the chain, it does it around his axle, without conical slid ing.The movement of the cage plate carries on the change from one sproc ket to the follow ing, in climbing and in des­cent, making the chain move on the desired sp rocket w ithout overrun.The lever of the derailment is sliding and safe, and it renders easier the research of the desired ratio.The chain w inds up on the rollers of the cage plate w ithout frictions and with smoothness.It is of easy adjusting for the research of the ends of the transversal stroke.It is a safe and long last ing gear.

•

16

SUPER RECORD Gear

0102018 composed of:0010103 roller, 84 gear return spring screw. 89 cab le loc king screw, 98/A gear return spring, 99 gear adjustingscrews, 780 cab le clamp bolt washer, BOBIA spindle, 61 011A lower body bu sh, 812/1A grub screw,813/A ten­sion spring, 4002 upper body, 4003 spring cage,4004 upper pivot titanium bolt, 4005 spring cage titanium bolt.4007 adjusting bolt upper spring, 4008 adjusting bolt lower spring,4009 spring cage cover,711901 0 outer cageplate, 7117019 inner arm, 7117033 front arm, 7119009 Inner cage plate, 7161015 sprocket bolt nut , 7350113gear sprocket bolt.

7 11 9009

~~7350 113

I

>001 0103

99

4009

7161015A~ 7119010

4008:;0I

4003

813/A

0102018

~ 4002

4007~i- I

..:f!!:!:' 8 1011A

_ 4005

4004

7 117033 <I

780

, ...:-• 8081A

• 89

17

NUOVO RECORD Gear •

10201A composed of: •0010/03 gear roller, 84 gear return spring screw, 88 clamp washer, 89 cable locking screw, 93/A sprocket bolt ,galA gear return spring, 99 adjusting screw, 120 lower adjust ing spring, 120/1 upper adjusting spring, 166/Aupper pivot bolt, BOStA upper body, a06/A front arm, B07/A inner arm, BOB/A spindle, SlOIA lower body,B10/1A lower body bush, 81 1/A gear spring bolt, 812/A spring cage cover, 81211A grub screw, 813/A tensionspring, 814/A outer cage plate, 815/A inner cage plate.

•

~/A

\;2099

8 10/A

- I89 808/A

805/A

4J,_ L8071A120/1 '7;

99

806/A ---~,

1020/A

18

RALLY TOURING Gear

. .'

5011/06 composed of:0010/03 gear roller. 84 gear return spring screw, 88 c lamp washer, 89 cable locking screw, 99 adjusting screw,120 lower adjusting spring, 12011 upper adjusting spring, SOBIA spindle. 8l0/1A lower body bush,81211A grubscrew, 813/A tension spring, 3452 outer cage plate, 3453 inner cage plate. 3461 sprocket bolt, 3462 front arm,3502 lower body. 3504 inner arm, 3505 spring cage bolt. 3506 gear upper pivot bolt. 3508 spring cage cover,3509 return spring, 3501 upper body.

•

99

120/1\'

3501- /

89 .

/ 8 10/ 1A

,3505

3504

s> 3502

~20

3508

•99

•

3461

•3452

19

NUOVO GRAN SPORT Gear •

3500 composed 01 : •0010/03 gear roller, 84 return spr ing screw, 89 cable locking screw, 99 adjusting sc rew, 120 lower adjusting spr­Ing. 120/1 upper adjusting spring, 780 cable clamp bolt washer, BOBIA spindle, 8 10/1A lower body bush,81 2/1A grub screw, 813/A tension spring , 926 inner cage plate, 933 roller screw, 3501 upper body, 3502 lowerbody, 3503 1rool arm, 3504 inner arm, 3505 spring cage bolt , 3506 upper pivot bolt, 3507 outer cage plate, 3508spring cage cover, 3509 return spring.

3500

840010/03

81 2/1A3501

~3 926

3506

35033508~

3507933

~ ~ •780

~203502

,/ 810/1A

.';'l.~-

3505

20

980 Gear

6011 /00 composed of:0010/03 gear roller, 93/ A sprocket bolt, 780 cable c lamp bolt washer. SOB/A spindle, 7116054 lower bodybush. 7116055 spring cage cover, 7117034 front arm, 7117024 1nner arm, 7119013 outer cage plate, 711 9014inner cage plate, 7143320 upper body, 7143321 lower body, 7161 108 fixing screw nut. 7200011 adjustingscrew, 7260060 return spring, 7260061 gear tension spring, 7350116 upper pivot bolt, 7350117 spring cagebolt, 7350119 cable locking screw.

7 116054

7260060

•

0010/03

711901 4

21

VALENTINO EXTRA Gear •

2170 composed of: •0010/03 gear roller, 80/A gear fixing plate ,89 cable loc king screw, 124 screw, 780 cable clamp bolt washer, 914clamp nut. 926 inner cage plate, 933 roller screw, 2151 lower body, 2152 outer cage plate, 2153/A gear springbolt. 2154 gear cover, 2155 gear spring, 2156/A front arm, 2157/A inner arm, 2156 gear lock nut. 2159 gearhanger washer, 2160 lower body bush, 2161 upper body, 22051A fixing pivot bolt, 2209 gear return spring,2215/A gear adjusting screw, 2217 adjusting bolt spring.

22

2205/A

"

2170

9 14

2217•

{,,,\....,/ 215; 11

221 5/A "' 2217

./2215/A

2160

2153/A

933

0010/03

2152

926

FRONT CHANGERS

0104011 braze-cn « Super Record» front changer0104010 c lip-on «Super Record» front changer01 04009 braze-on «Record» front changer01 04007 cl ip-on «Record» front changer0 104006 «Gran Sport» front changer0 104008 «Nuevo Valentino» front changer0104012 clip-on «980» front changer2050 front changer

0104011 0104010 0104009 0104007

•

0104008•

0104008 0 104012 2050

23

Braze-on SUPER RECORD Front Changer •

0104011 composed of: •89 locking screw, 215 cage spanner bolt, 21 7 cage spacer bolt nut. 774 adjusting screw, 7117027 upper arm,780 cable clamp bolt washer. 7117028 lower arm , 788 cage shank DOlt. 790 bush, 7260047 spring for adjustingscrew, 787 return spring , 7102012 braze-on hanger. 7300105 concave washer. 7350115 screw for braze-onfront changer. 941 circlip.

1180006 Fork complete with : 215 - 217· 790 · 105217 - 7 ' 17027.

1143036 Body complete wi th: 2 1430 14 - 7300 105 - 7350 115 - 94 1.

0 1040 11

~7747117027 .#. ~

72600~~

21430 14

, i7 10 2012

89

21 7 •I'

105217

217

24

Clip-on SUPER RECORD Front Changer

010401 0 composed of:89 locking screw, 215 cage spanner boll , 217 cage spacer bolt nut, 774 ad justing sc rew, 776 clip fixing screw,777 nut, 7117027 upper arm, 780 cab le c lamp bolt washer, 71 17028 lower arm, 788 cage shank bo lt, 790 bush,7260047 spring for adjusting screw, 767 return spring, 7182025 clip, 773/1 hinge, 773/2 hinge spindle, 941eirelip.

1180001 Fork complete w ith: 215 - 217 - 790 - 105217 - 7 117027.

1143029 Body complete w ith : 776 - 777 - 2t43004 -7182025 -773/ 1 - 77 3/2 - 94 1.

0 104010

•

215

•

7 11702B

89

• 780

tP 71 17027

788

7182025

-,

777

~

/)4

Q7260047

776

25

Braze-on RECORD Front Changer •

0104009 composed of: •89 locking screw, 215 cage spanner bolt, 217 cage spacer bolt nul , 774 adjusting screw, 778 upper arm, 780cable clamp bott wash er, 782 lower arm, 788 cage shank bolt, 790 bush, 7260047 spring for adjusting screw,787 return spring, 941 circlip, 7102012 braze-on hanger, 7300105 concave washer, 7350115 screw for braze­on front changer.

1180001 Fork complete with: 2 15 - 2 17·778 · 790 - 1052/ 7.

1143036 Body complete with : 2 1430 14 - 7300 105 - 7350 11 5 - 941.

0104009

26

790

r;~

215

217

1052/7

89

780

~:78 .Iif. " 7260047~

I214301 4

7300105

735011 5

Clip-on RECORD Front Changer

0104007 composed ot:. 89 locking screw, 215 cage spanner bolt, 217 cage spacer bolt nut. 773/2 hinge spindle. 774 adjusting screw,776 clip fixing screw, 777 nul , 778 upper arm, 780 cable clamp bolt washer, 782 lower arm, 788 cage shank bolt,790 bush. 7260047 spring for adju sting screw, 787 return spring, 773/ 1 hinge, 941 circlip.

1180001 Fork complete with: 2 15 - 2 17 - 778 · 790 - 1052/7.

1143029 Body complete with : 776 - 777 - 773/1 - 773/2 - 941 - 2 143004.

0104007

. ~3/2

/: 774

;7 ~2143004

<,

/94 1 •

/2143004

89

~ 780

tJ 778788 1

782

•

217

'iiV790"1

"215

•

27

GRAN SPORT Front Changer •

0104006 composed of; •89 locking screw, 215 cage spannerbolt. 217 cage spacer bolt nut, 773/1 hinge, 773/2 hinge spindle, 774 ad­[ustmq screw, 775 adjusting bolt spring, 776 clip fixing screw, 777 nut. 778 upperarm, 780 cable clamp bolt wa­sher, 782 lower arm, 787 return spring, 788 cage shank bolt, 790 bush. 941 clrouo.

1180003 Fork complete with: 2 15 . 217 . 778 - 790 - 78 4.

1143013 Body complete with: 773/ 1 - 776 - 777 - 773/2 - 94 1 - 2 14300 t .

0104006

28

215

217

217

R

784

89

777

~773 /1

/"

,/ 776

/ 773/2

980 Front Changer

0104012 composed of:89 locking screw, 215 cage spanner boll. 217 cage spacer bolt nut, 773/ 2 hinge spindle, 790 bush, 2003 cablec lamp boll washer, 22 15/A upper adjusting screw, 2217 spring for adjusting screw, 7117025 upper arm,7117026 lower arm, 7161108 nut, 7182026 hinge. 7260063 return spring, 941 circlip.

1180005 Fork complete with: 215 - 217 - 790 - 7117025 - 7117026 - 7180077 - 7260063.

1143046 Body com plete with: 21430 15 - 71 61 108 - 7182026 - 941 - 773/2.

01 0401 2

2215/A

773/ 2

/7182026

94 1

21 430 15

89

4 2003

dJ711 7025

7180077

•

• 215

29

NUOVO VALENTINO Front Changer

0104008 composed of:•89 locking screw, 215 cage spanner bolt. 217 cage spacer bolt nut, 773/1 hinge. 773/2 hinge spindle, 774 ad­justing screw, 775 adjusting bolt spring, 776 clip fixing screw, 777 nut. 780 cable clamp bolt washer, 788 cageshank bolt. 790 bush, 787 return spring, 7117017 upper arm, 7117018 lower arm, 941 circup,

1180004 Fork complete with: 2 15 - 2 17 - 790 - 7117017 - 2050/ 7.

1143013 Body complete with : 773 - 773/ 1 - 776 - 777 - 773/2 - 941.

0104008

787

~774

775~

. •."'\ . "~773/ 1 776

~/2I773

777

7117018

89

217

Il215

30

VALENTINO Front Changer

2050 composed of:89 locking screw, 210 body clip bolt. 2 11 fixing clip, 213 fork fixing cli p, 214 fork. 21 7 cage spacer bolt nut. 226adjusting spring. 227 adjusting lever screw, 780 cable clamp bolt washer. 1601 front changer body, 1602 frontchanger lever. 1603 fork holder spindle. 1604 return spring, 1605 l ixing lever screw.

780

89

226

217

1601

2050

1605

•

21 4 ."' .,,

•

31

CONTROL LEVERS •

101213 handlebar control lever101311 «Record» gear down tube control lever1013/1 A R.H. down tube control lever1013/5N «Record» braze-on control lever for front changer, without 660 boss10 13/ 6N «Record» braze-on control lever for gear, w ithout 660 boss1014 «Record" twin down tube control lever10 14/ 1A twin down tube control lever1207 /N braze-on gear control lever, without 660 boss120B/N braze-on front changer control lever, without 660 boss.

•

C':\

nn,jI" ' ••

I' ~I~" .. .. ,•

!! '

..

p.... : i..

.#"/

1208/N 1207lN 10 13/ 1A 101 3/1 1013/5N 101 3/6N

iN , ,, ..\. I! " •

..:g

t .- I,. 0.. ... . "•i~ , .... r,..l: •..

"

1014/1 A 1014

32

CONTROL LEVER Components

CAT. MODEL COM POSITIONDESCR IPTION No. 1014 lD13f5N 1013/6N 101 3/1 1014f1A 1207/N 1208/N 1013/1A 1012/2

EXPANDING SCREW 137 •SEGMENT 138 •COUNTER NUT 139/1 •HEXAGONAL SCREW 13912 •TENSION ADJ.SCREW 140/ 1 •SEG. HOLDING RI NG 142 •RUBBER CAP 173 •FRICTION PLATE 174/ 1 •CONTROL BODY 20012 •CONTROL LEVER 201 •RH COLLAR 600 • •R.H, PLATE 60012 • •RH CONTROL LEVER 601 • • • • • •L.H. CONTROL LEVER 602 • • • •ADJUSTING SCREW 604 • •ADJ.WING NUT 604/ 1 • • • •FIXING CLIP BOLT 609/1 • • • •

I TWIN CONTROLCLIP 610 • •L H. PLATE 611/2 • •WASHER 661 • • • •NUT 777 • • • •ADJ. WING NUT 1202003 • •CLIP 7182003

TWIN CONTROL CLIP 7182018

WASHER 7300115 • • • ••

ELASTIC WASHER 7304005 • • • •COVER Q190f03 • • • •FRICTION WASHER 0190/D6 • • • • • • • •ELASTIC WASHER 0190/07 • • • •

o600/2 I 60 1 I 01 90/03 6041 1

01 90/04 01 90/06 0190/07

7182018•

60411 0190/03 I 602 I 6111201 90/07 0190/06 0190/04

~- 0

33

KIT for frame •

10101010lA1010/81010/110531060

«Record» set fork ends, with eyelets«Record» set fork ends, without eyelets«Nuevo Record» set fork ends, wi thout eyelets«Sport» set fork ends, with eyelets«Track» set fork ends-Corsa- set fork ends.

•

1134005 Set of screws, nuts and springs for .. Record .. fork ends, without eyelets1134006 Set of screws. nuts and springs lor 0< Nuovo Record .. fork ends, w ithout eyelets11 34004 Set of screws. nuts and springs for 0< Record .. fork ends, with eyelets.

660621626/8663

Braze-on bossBraze-on cable stopBraze-on front changer cable ferruleBraze-on cable ferru le.

1053

~~

1010/8

1010 1010/1 1060

626/8

.Q .......621 6636601134005

••--- a' Mvnn Uh

1134006

34

HUBS SETS

1034103510361036/212511253

Pair .. Record .. road small flange quick release hubs (f langes with 24·28-32-36 -40 holes)Pai r ..Record .. road large flange quick release hubs (flanges with 24-28-32-36-40 holes)Pair ..Record .. track large flange solid spindle hubs (flanges with 24-28-32-36-40 holes)Pair «Record» track small flange solid spindle hubs (flanges with 24-28-32-36-40 holes)Pair - Nuovo Tipc » small flange quick release hubs (flanges with 28-32 -36 holes)Pair .. Nuovo Tipo » large flange quick release hubs (flanges with 36 holes)

N.B. When nol specified all the hubs will be furnished with Italian thread, flanges with 36 holes, 6 speeds .

In the hubs Campagnolo expresses, perhaps, its utmost precision level.The c learance of the two ball bearings is the minimum whichcan be obtained to allow the max imum smoothness .The ball s are selected to the micron.The body of the hub is a whole piece forged , in light alloy duly treated to make a prod uct having high and heavyfeatures.The roll ing tracks are all hardened by heat treatments and grinded to obtain a very low roughness and highhardness.The clamping is always sure and keeps the w heel in a perfect position, also thanks to the severe paralle lism o fthe width, w hich guarantees the life of the axle.

1253

10341251

1036

1036/2

35

Components of RECORD Road Hubs

1 front lock nut, 18 conical spring, 19 front hollow axle, 25/R front cone. 29/R rear hollow axle (1 32 mm lang).-Onrequest the axle can be supplied 134 and 140 mm long. 32/R rear cone, 33 rear lock nut, 35 front hub lock wa­sher, 36 rear hub lock washer, 46 rear hub spacing co llar, 59 quick release conical adjuster, 60 quick release cap,61 quick release lever. 6 1/1 domed nut. 61/2 Grower washer, 64 quick release front skew er, 65 quick releaserear skewer, 737 front ball cup. 738 rear ball cup, 739 lront dust cover, 740 rear dust cover, 741 elastic clip,1001/3 complete front quick release skew er for ..Record » hub ,1001/45 complete front axle for .. Record .. roadhub , 1006/55 complete rear axle for ..Record .. road hub, 1006/ 8 complete rear quick release skewer lor .. Re­cord - hub. 2104 set (9+ 9) special ¢ 7/32- balls selected with 1/1 000 of mm tolerance. 2106 set (9+ 9) special¢ 114- balls selected with 111000 of mm tolerance.

1001/3

( 61 '-t' 50 rst = ~m lT1\1 t» S9

64 18 1861 /2 ¢

.-:161 /1 .. i?'- 61,•

59 (?l ~ llll) ~ [~) 6065. 18 18 ~ 61/ 2

1006/8.., 61 /1

0 " I) 'E till ) ae1 35 2S/R 19 2S/ R 35 1

l001 /4S

Q -».~

~,', J' . , -,

, 0 ' M , 0,,' 741 ,,'739 2104 737 737 2104 739

" S) em " II

" J '~29 / R "

33 133 36 32/R 32/ R 46 361006158

......... • ,',, -, , -., " .. , ",,' 741 ,,'740 2106 738 738 2106 740

36

RECORD t rack Hubs Components

1 front lock nut, 19/P front solid sp ind le axle for .. Record .. track hub, 25/R front cone. 29/P rear solid spindle axlefor «Record» track hub; 32/R rear cone, 1283 rear lock nut, 35 front hub lock washer, 36 rear hub lock washer,667 .. Record» track hub front nut. 668 .. Record .. track hub rear nut. 737 front ball cup ; 738 rear ball cup, 739 frontdust cover, 740 rear dust cover, 743 rear track hub lockring, 1001/4P complete front axle for .. Record .. track hub,1006/5P comp lete rear axle tor « Record .. track hub. 2104 set (9+9) spec ial ¢ 7/3 2- balls selected with 1/1 0 00of mm tolerance. 2106 set (9+9) special ¢ 1/4" balls selected with 111000 of mm tolerance.

{l' 0 r, I) 11 1 ~ 't1",

667 , 35 2S/ R 19/P 2S/R 35 , 667

l 001/4P•-, ':0., -, '-.., -, ] , ., . , , , . 's-: ~ ,,'

739 2104 737 737 2104 739~

I (t, O ~ D' l .PJ ~',

29/P• 32/ R 36 '283 666 1 '668 1283 36 32/ R

1006/SP743

0 ....'.. (9 ~,',

G' '. , »., . , "v-:"740 2'06 738 738 2' 06 740

37

NUOVO TIPO Hubs Components

1 front lock nut, 18 con ical sp ri ng, 19 front hollow axle. 25 front cone, 29 rear hollow axle (127 mm long). o rtrequ est the axle can be supplied 132 and 134 mm long).32 rear cone, 35 front hub lock washe r, 36 rear hub lockwasher,46 rear hub spacing collar,1001/4 complete front hollow axle for " Nuovo Tlpo »hub, 1256 complete rearhollow axle for - Nuovo Tipo .. hub, 1270 front ball cup. 1271 rear ball cup,1272 front dust cover, 1273 rear dustcover, 1283 rear lock nut, 1301 quick release cap, 1302 quick release lever. 1303 circlip for lever. 1304 conicaltension spring, 1305 front quick release skewer,1306 rear quick release skewer,1307 knu rled adj. nut,1309 wa ­sher for skewer, 131 0 complete fron t quick release skewer for ..Nuovo uoo- hub. 1311 complete rear quick rel­ease skewer for ..Nuevo uoo .. hub, 2105 set (10+ 10) special ¢ 3/ 16- balls selected with 1/1 000 of mm toler­ance, 2106 set (9+ 9) spec ial ¢ 1/4- balls selected wi th 1/1000 of mm tolerance.

1310F A , ,

11JV

1302 e 13091301 @ eo - I rrnA1'11 C() 1307-

1304 1305 18 18•1303

2 '· - .. ),T. 1302

1309:

1307 fl ~ 'lli • CJ rtI E) 13011306I 18 18 1304 ~

131 1 1303

0 '. :::J :] I a"1 35 25 19 25 35 11001/4

@ ,'.~ "

A

" ~\ ,J" , ," " ~

1272 2105 1270 2105 1272

@ IJ f ~ (j ~ ~1' 283 36 46 32 29 32 36 1283

11256

,', ,', (', », " v' . , .,,' ,,'

1273 2106 1271 1271 2106 1273

38

CHAINWHEEL SETS

0304" Gran Sport» road chainwheel set (wi th 170 mm cranks. pedal hole ¢ 9/ 16"x20 F. and chainring for cha in1/2"x3/3r [2 mm]). Speci fy the number of teeth of chainring available from 42 to 57 teeth, 104914 cyclocrosschainwheel set (w ith 170 mm cranks, pedal hole ¢ 9/ 16Mx20 F. and chainring for chain 1/2"x3/32" [2 mm]). Spe­cify the number of teeth of chainring available from 42 to 57 teeth, 1049/ A « Super Record» road chainwheel set(w ith 170 mm cranks, pedal hole ¢ 9/16"x20 F. and chainring for chain 1/2·x3/32 ~ [2 mmJ). Specify the numberof teeth of chainring available from 42 to 57 teeth. On request cranks 165-167,5-172,5-175-177,5-180 mmlong are supplied, 1049/ 5 Triple chainring chainwheel set (wi th 170 mm cranks, pedal hole ¢ 9/ 16"x20 F. andchainring for chain 1/2"x3/32" [2 mm] with fixed 36 toothing). Spec ify the number of teeth of the other two chai n­rings available from 42 to 57 teeth. On request cranks 165-16 7,5-172 ,5-175-177,5 -180 mm long are supplied,1049 « Record» road chainwheel set (wilh 170 mm cranks, pedal hole ¢ 9/1 6"x20 F. and chainring for cha in 1/2"x3/32" [2 mmJ). Specify the number of teeth of cha inring available from 42 to 57 teeth. On request cranks 165­167,5-1 72,5- 175-177,5-180 mm long are supplied, 1051 «Record» track chainwheel set (with 170 mm cranks,pedal hole ¢ 9/16"x20 F. and chainring lor chain 1 / 2 ~x l /8 " [3 mm)). Specify the number of teeth of chainnnqavailable from 44 to 56 leeth. On request cranks 165-167.5-1 72,5 -175 -177 ,5-180 mm long and chainring forchain 1/2"x3/32" (2 mm ) are supplied, 0305 « Gran Sport» road chainwheel set, 116 mm (with 170 mm cranks,pedal hole ¢ 9/ 16"x20 F. and chainring for chain 1/Tx3/32" [2 mmJ) available as follows: 35, 36, 37, 38, 39, 40,4 1,42, 43, 50, 5 1, 52, 53 teeth, 0306 «Gran Sport» road chainwheel set. 116 rnrn. with trip le chainring (with 170mm cranks, pedal hole ¢ 9/ 16~x20 F. and chainring for cha in 1/ 2"x3/32" [2 mmj), avai lable as follows: 35, 36, 37.38, 39, 40, 4 1. 42, 43, 50 . 51 , 52. 53 teelh, 4 151 «Super Record " track chainwheel sel, (w ith 170 mm cranks,pedal hole ¢ 9/16"x20 F. and chainring for chain 1/2"x1/8" [3 mm]). Specify the number of teeth of chainringavailable from 44 to 56 teeth. On request cranks 165-167,5-172,5-175-177,5-180 mm long and chamrinq forchain 1/2"x3/32" (2 mm) are supplied.

From the aeronautics emerges the concept of need of lightness combined with the maximum safety.The manufacturing p rocess of Campagnolo cranks, the raw materials employed, the heat treatment used, followthe same standards of the civil and military aeronautics, starting from the purchase of Ihe raw material.They are oblained w ith a pressing process of aeronautical type light alloy and are worked on all surfaces.Their reliability degree follows the same concept of the aerop lanes: to an accurate ca lculation of the technical pa­rameters follows the application of safety coefficients w hich can guaranlee the reliability also under conditions ofwork heavier than those simulated.The working of all the surface g ives to the crank a hig h prec ision degree; the weight and balancing are steady foreach piece and the squareness among the rotating spind le, the pedal run and the ring toothing on wh ich thechain slides are perfect.The foot leaned on the pedal follows a cy lindrica l and non conical run, the chain does not receive lateral inclina­tions.The shining finishing of the surface, besides giving a pleasant look, allows a strict selective control.

39

40

<<

<<

<

, - - -

1049

1051

- - , , ,,,,

-

-

- -

1049/A

4151

-

- •- -, , ,,,>><"(

•

• No more available

10 48/4

,e

(,,,

1049/5

,

•

- - -

0304 '

0305'

• , ,

0306 '

••

•

,)

41

SUPER RECORD and RECORD ROAD Chainwheelset Components

751 R H. road crank (complete with 75 6 cover) 170 mm long.On requesl the follow ing sizes: 165-167,5-172 .5­175-1 77.5-180 mm long are suppl ied, 752 LH. road crank (complete wi th 75 6 cover) 170 mm long.On requestthe following sizes : 165-167,5-172,5-175-177,5-180 mm long are supp lied. 753 ... Record .. road chaiming torchain 1/2·x3 /32 - (2 mm). Specify the numberorteeth of cha inring available from 42 to 57 teeth. 753/A .. SuperRecord .. road chainring for chain 1/2"x3 /32 - (2 rnm). Specify the number of teeth of chainring available from 42to 57 teeth. 754 Road chainwheel fastening screw, 755 Nut for road chainwheel fastening screw, 756 Crank cov­er plate.

753/A

752

' .

751

e~754

f i755756

42

SUPER RECORD and RECORD TRACK Chainwheelset Components

756 Crank cover plate, 757 R.H. track c rank (complete wi th 756 cover) 170 mm long. On req uest the followingszcs: 165-167,5-1 72,5-175-177.5-180 mm long are supplied, 758 L.H. track c rank (complete w ith 756 cover)170 mm long. On request the following sizes: 165-1 67.5-172,5-175-1 77.5-1 80 mm long are supplied, 760• Record .. track chainring for chain t l2·xl /S- (3 mm). Specify the number of teeth of chainring available from 44:0 57 teeth, l60/A .. Super Record - track chainring for chain 1/2·xl /S - (3 mm). Specify the number of teeth ofcnain rin q available from 44 to 57 teeth , 761 Track chainwheel fastening screw, 762 Nut for track chainwheel tas­:ening screw.

• 756

760/ A

~!;761

~

1:1762

757

760

~\ '

43

GRAN SPORT road Chainwheel set Components

3322/A5 «Gran Sport » R.H. crank, 144 mm (complete with 756 cover) 170 mm long, pedal hole ¢ 9/ 16"x20 F.,3322/A5 " Gran Sport » R.H. c rank, 11 6 mm (complete with 756 cover) 170 mm long, pedal hole ¢ 9/1 6"x20 F.,3321/AS «Gran Sport» L.H.crank. (complete with 756 cover) 170 mm long, pedal hole ¢ 9/16"x20 F. , 756 Crankcover plate, 754 Chainwheel fastening sc rew, 755 Nut for chainw heel fastening screw, 753/GS Road chainring,144 mm, lor chain 1 /2 ·x3/3 2~ (2 mm). Specify the number of teeth of chain nnq available from 42 to 57 teeth.753/GS Road chainring , 116 mm for chain 112"x3t32" (2 mm) ava ilable as follows: 35-36-3 7-38 -39-40-4 1-42­43 -50-51 -5 2-53 teeth.

•

•

753/GS-11 6753 /GS-144

•

33211A5

~754

756

37553322/A5-int. 14433221A5-ont.116

44

Triple chainring and cyclo-cross chainwheel setComponents751 R.H. road crank (complete with 756 cover) 170 mm long. On request the follow ing sizes : 165-16 7,5· ' 72.5­, 75-177,5-180 mm long are supplied, 752 L.H. road crank (completewilh 756 cover) 170 mm long.On req uestthe following sizes: 1 6 5 - 1 6 7 ,5- 1 7 2 , 5 · 1 7 5 ~ 1 7 7 ,5 · 1 80 mm long are supplied, 753 Road chainring for chain 1/2"x3/32" (2 mm). Spec ify the number of teeth available from 4 1 to 57 teeth,753/1 Cycle-cross inner f lange.Spe­cIfy diameter. Supplied with diameter of 186-' 98-210-222 rnm. 753/2 Cycle-cross outer flange. Specify dia­-neter. Supplied with d18meter oI1 86-198-21 0-222 mm,754 Road chainwheel fastening screw, 755 Nut for roadchainwheel fastening screw, 756 Crank cover plate. 830 Triple chainring and cycto-crcss fixing bolt. 831 Nut for~ rj ple chain rinq and cvcto-cross flxing bolt. 832 Spacer for trip le chamring and cycle-c ross. 761 Chainwheel fas­tening screw, 804 Special chamrinq for chain 112-x3 /32 - (2 mmj with fixed 36 toottunq. 818 Triple chainringspacer, 81 9 R.H. crank for special triple chainring (complete with 756 cover) 170 mm long. On request cranks165-167,5- 172,5- 175- 177 ,5- 180 mm long are supplied.

753/1

753

,

r ;' ../,.1\-'/'../\ ~-' -\..--

J' ) O(~ ' -

n

761

819

752

830832

I . 1\C' _ . iJ

751

831

753

753

755 819 754•

804g CO

-- ~i761 -(D ~

755- ,I

6' 8 - ,_ .756 616

45

BOTTOM BRACKET SETS

10461046/A1046/31046/433315031/00

" Record» road and track bottom bracket set,«Nuevo Record » road bottom bracket set.«Record » road triple chainring bottom bracket set,«Record » road cycle-cross bottom bracket set,«Sport » road bottom bracket set,«Gran Sport » triple chainring bottom bracket set.

•

Meaning of ..AXLE MARK ..:- the firs! number indicates the bracket width- .. p .. Indicates track- «55 .. indicates road- ..C .. indicates cross

On request we supply cups and lockrings with thread increased by 0,5 mm.

~ -o -c -e -o< < < < < ~• • • • • <~ s: s: ~ s: •E - - - ~

~ ~ ~ s: -G G G G G 0;0 0 0 <

I I lu: j .----I •Nu, I x

~•N I ' - 0

Z X U x ,« "::J ~ m l ~ u - ,~ ,--~___f f t & ~ ' s

THREAD TYPESTOTAL

AXLE MAFlK BRACKET WIDTH AXLE LENGTH

65-P·l10 1. 65 .' 1. mm. 104•

68-P-ll 0 14,5 66 3.' 15,5 • 105TRACK ,

68-P-l20 17 66 3. 17 • 109•

7o-P- t 20 ,. 7. S ,. • 109

\68-55 17 66 ~ ~ mm. 11 2

ROAD 7. 11370-55 17 .. .~ 19 •--I

ROAD \ 68·55 X 3 eo 66 ~ 29_ mm. 123TRIPLE 70-5 5 X3 I ""- . 7. M 27 • '"

1~ ::"i\ "'C ~ . 66 mm. 115.5CROSS

ts 1T,",c 7. • 115.51 . r --- . II ,

46

BOTTOM BRACKET SETS Components

744 Axle fo r ..Record .. road and track bottom bracket set, 744/A Axle for .. Nuevo Record - road bottom bracketset. 744/1 Axle for triple chainring bottom bracket set. 744/2 Axle for cyctocross bottom bracket set, 745 Fixedcup (specify thread), 745/A ..Nuovo Record .. fixed cup (specify thread), 746 Adjusting cup (specify thread),746/A .. NUQVO Record» adjust ing cup (spec ify thread), 747 Lockring wi th normal 3,5 mm thickness (avai lablealso 4 or 4,5 mm thick) (spec ify thread) , 748 Crank fixing screw,749 Crank fixing washer,21 00 Set (11+ 11) spe­c ial ¢ 1/4· balls, se lec ted with 111000 of mm tolerance, 2110 Sleeve. 2110/1 Cone for sleeve. 3332 Axle for.. Gran Sport .. bottom bracket set. 3332/1 Axle for .. Sport» trip le chain rinq bottom bracket set.

\

211011 2110 2100"

Q i 0~ I,

748 749 748749 744/A

747 7461A 745/A

8 ) l J•

~ ) ~.,, "

~

74412

0,

0' .

-&..~~".

748 744/ 1 748749 749

745747 746 ~., I•••

744

748o749

745

3332

746747

o748 749

3332/ 1

47

HEAD SETS

103910401040 / A40414141

48

«Record » road head set,«Record » track head set,«Sport" road head sel complete with 7300 109 washer,«Super Record » road head set,«Super Record » track head set.

4041 4141

.- ..~ .....__. -

i~o 'I 'C'. .. '''-'' ,•>~".... " ,4042 ~ 4042 ----------

•

, -, -, 7300072 ," .)7300072 ,~ » ~-

4.~~(~')

4142~'i<

\~~r . ~ , "4044

@ 4143 ~-M!4045 ",~.qr.;,,,, .f

~ , )

(~) 4144( "-F"

4046

0 4145 tE:~-4047 -,. 2102 ,JI.

2101

•

HEAD SETS Components

681 lock ing nut (specify thread), 682 Locking washer, 683 Road top race (specify thread). 684 Road top cone(0.5 mm larger diameter available) , 685 Road bottom race (0.5 mm larger diameter available), 686 Road bottomcone (small diameter available) , 687 Track top race (specify thread) , 6871A .. Sport .. top race (specify thread),688 Track top cone (0,5 mm larger d iameter available), 688/A «Sport» top cone (0 .5 mm larger diameter avail­able), 689 Trac k bottom race (0,5 mm larger diameter available), 689/ A .. Sport .. bottom race (0,5 mm larger dia­meter available). 690 Track bottom cone (small d iameter avai lable), 6901A .. Sport .. bottom cone (small diameteravailable), 2101 Set (20+20) special ¢ 3/16 w balls selected w ith 1/ 100 0 01mm tolerance, 2102 Set (24+24)special ¢ 5/3 2" baits selected with 1/1 000 of mm tolerance, 4042 «Super Record »fcckinq nut (spec ify thread),4044 «Super Record " road top race (specify thread), 4045 «Super Record" road top co ne (0,5 mm larger dia­meter available), 4046 «Super Record» road bottom race (0,5 mm larger diameter available), 4047 «Supe r Re­cord " road bottom cone (small d iameter available), 4142 «Super Record » track top race (specify thread), 4143.. Super Record » track top cone (0,5 mm larger d iameter available),4144 «Super Record» track bottom race (0,5:TIm larger d iameter availab le),4145 .. Super Record» track bottom cone (small diameter available), 4145 .. Superaecom- track bottom cone (small diameter available), 7300072 «Super Record- locking washer, 7300109.. Sport - headset washer.

1039 1040 1040/A

49

PEDALS

402141211037/A10371038/ A10383700

Pair « Super Record » road pedals,Pai r «Super Record» track pedals,Pair Superlight «Record» road peda ls,Pair «Record» road pedals,Pair Superlight «Record» track pedals,Pair «Record » track pedals,Pair «Gran Sport» road peda ls.

•

• No more available.

50

4021

103 71A

4121

1038/A

•

' ,' ,.... ,"

RECORD and SUPER RECORD Pedals Components

89 toe clip screw for «Super Record - . «Record -. u Gran Sport .. peda ls, 669 L.H. pedal axle with thread ¢ 9/16·x20 E, 670 R.H. pedal axle with thread ¢ 9/1 6·x20 F.. 672 pedal inserted race (available also in oversize), 673toothed washer, 674 pedal axle cone, 675 pedal axle lock nut. 676 toe clip bolt, 677 toe cl ip washer, 678 dustcap, 679tA supertiqht pedal cap. 2103 sel (48) special ¢ 5/32- balls selected with 1/1000 of mm tolerance.4024 «Super Record .. RH. titanium pedal axle. 4025 «Super Record .. L.H. titan ium pedal axle. 4026 pedal in­serted race (available also in oversize),4027 pedal axle cone,4028 set (64) special ¢ l IS- balls, selected wi th 111000 of mm tolerance.

679/A678675673674

672672

~ ~677 676 69 -- ~

2103

-1Jf3I lI~tt:::e[_ ~ !!II-669 670

6786756734027

40264026

• o677 89 4028

t~=~:( lt91]11~4025 4024

51

GRAN SPORT Pedals Components

89 toe clip screw for « Super Record» and «Gran Sport» pedals, 673 toothed washer, 675 ped al axle lock nut.677 toe c lip washer. 7146008 dust cap,679/ A superli ght pedal cap, 2103 set (48) special ¢ 5/32" balls, select­ed with 1/ 1000 of mm tolerance, 7131053 pedal inserted race, 674 pedal axle cone, 7281067 L.H. pedal axlewith thread ¢ 9/16"x20 F" 7281066 RH. pedal axle with thread ¢ 9/16"x20 F.

679/A

•7146008

, (0 (J674 673 675

7131053 71 31053

tC •677 69

2103

7281 067

7

7281066

52

Toe Clips and fixing shoe plates

0990105 <Campaqnolo» set toe clips with fixing shoe plate.0990/ 0 6 «Campaqnolo» set superlight toe clips with fixing shoe plate. Both types are avai lable in the following

sizes: smal l. medium, large,0 110056 Fixing shoe plate set, consisting of 7300002 washers, 7350002 screws and 7283021 f ixing shoe

plates.

7350002

~~~ ~I/~

73000020110056

0990105

/ ,.7283021- ,.:

~.'

0990106

•

53

SEAT PILLAR

•104438004051/1

54

..Record" seat pillar, 130 and 180 mm long,

..Gran Sport» seat pillar, 130 and 180 mm long,

..Nuovo Super Record .. seat pillar, 180 mm long.

All the seat pillars are available in the following diameters: 25-25,8-26-26,2·26,4-26.6-26,8-27-2 7,2·27,4.

405 111

SEAT PILLAR Components

698 front bracket, 699 rear bracket, 700 bolt nut. 701 L.H.side support. 702 R.H. side support. 703 seat pi llar fix­ng and adjusting bolt, 1160/01 convex washer for .. Super Record .. seat pillar, 1160/02 seat pillar sliding sup­oort. 1160/03 seat pillar fixing bracket, 1160104 ..Super Record .. seat pilla r sc rew, 7300107 -Noovo Super Re­cord- seat p illar washer.

•

698

~~699

V702

703I ~

~ '1 60/03

1160/02

1160/01

7300107

1160104

55

BRAKES

40614061/120402040/1118117

.. Super Record " 52 mm brakes set with drilled levers and cables,«Super Record » 47 mm brakes set with drilled levers and cables,«Record» 52 mm brakes set with levers and cables,«Record» 47 mm brakes set with levers and cables,«Gran Sport» 52 mm brakes set with levers and cables,«Gran Sport.. 47 mm brakes set with levers and cables.

•

On request the brakes set are supplied in the allen bolt version.

56

4061

2001, 2000

• •• •• •• 4062 •4062 • •

• •• •

• •• •

20302030

20012000,

2040

I01180280118028 I

011 60110116010

117

•

57

BRAKES SPARE PARTS

2002 rear center bolt fixing nut. 2003 washer,2004 cable clamp washer, 2005 cam,2006 Quick release cam lev­er, 2007 adjusting nut. 2008 cable clamp bolt. 2009 adjusting screw. 2010 brake block. 201 1 tension spring,2012 front brake center bolt. 2012 /1 rear brake center bolt, 2013 cable clamp, 2014/0 R.H. brake shoe, 2014/5L.H. brake shoe. 2015 frict ion washer. 2015/1 inner frict ion washer, 2016 domed nut, 2017 cam locking nut.2018 locking nut, 2019 f ront stirrup arm, 20 19/ 1 front stirrup arm for small brake. 2020 rear st irrup arm, 2020/ 1rear st irrup arm for front small brake. 2020/2 rear stirrup arm for rear small brake. 2021 knurled nut. 2022 brakeshoe nut. 2024 adjusting rubber, 2026 f ront b rake outer casing (61 cm),2027 rear brake ou ter casing (11 9 em)2028 front inner ca ble (73 em) , 2029 rear inner cable (13 1 cm), 2031 lever hood, 2032 control lever (completewith 2035 cable holder), 2033 brake lever clip, 2034 lever pivot pin, 2036 grub screw, 2037 clamp nut. 2038b rake lever bush.2039 rubber lever hood,20411Aserrated washer for rear brake, 2041 1A serrated washer forfront brake , 2043 rubber for small brake lever, 4063 drilled lever (complete With 2035 cable holder).

58

2016

2014/ 5

2021

)' <,

" ('0 "'- ,~ ~

21118

-

2014/ 0

•,

G'2043

2039

So 20032022

2009

l\V!), ~

2020 /2 (,

B2ll41/ A 21112

@ =" = ®:= 2007@

2024 02003 2012/ 1 2015 _ r': 2015/1 2019

~ @(i) =("'¢= 0~L.-.~J I' @ , ~y-,. (

2002 2041/ A .~ " L2020 21113 __'

21111 ! '*" (' ..::., ce J -,

1 ~ 2004 '~ 20062OO5

\ ..

/. 2008 2017 " <:,~ .~ 2022

la;:::-" ~~ I 2003,

- . 2031,, J -r7;JJ• 11 if'• ::w- ,

'" 20332037 2036

2038 0 ;::02029 2034 0 2028

F . - 2038•

e~~

~ IJV

••.'.'• I•" I., •I ••

\ •2027 21126,

4063,2032

2003'. "... .... "J l2002

59

FREEWHEEL

0521/00Tool kit for fitting and unfi tting freewh eel, including:0520/10 Tool for fitt ing freewheel body, .0520/20 2 keys with chain for freewheel sprockets,0520/30 Complete key with profile freewheel teeth .0520/40 Complete key for unfitting freewheel,0520/41 Sleeve for unfitting freewheel key,0520/42 2 grains for unfitting freewheel key,

0520/40 Complete key for unfitting «Campaqnolo» freewheel from hub,0520/41 Sleeve for unfitting freewheel key.

•

Standard arrangementsfor 6 sproc ket freew heels:

,

12-13- 14-15 -16-1712- 13-1 4-15- 17- 1912 -13-1 4-16 -18-2013- 14-15-16- 17- 1813-14-15-1 6-18-2013-14-15-1 7-19- 21

13-14-16-18-20-2213-15-1 7-19-21 -2313-15-18-20-22-2414- 15- 16-17- 19-2114-15-17-19-21 -2314-16-19-22-24-26

0520/40

60

AB

DE"" DE"" "" "" " "" ,

" F" " "" " , G" " "" " "" .. " "" " " "" " "" .. "c .. "" "

Drawing indicates allavailable toothing

0520/4 1

BMX

806/ BMX .. BMX .. chainset wi thout 8 .8.. 305/BMX .. BMX.. pair pedals w ith spec ial toothing cage, 821/BMX.. BMX .. large flange, solid spindle, fixing nuts pa ir hubs. 822/BMX .. BMX .. small flange. solid sp indle, fixing nutspair hubs.

The above " BMX » items are available in silver. light blue. gold colours.

305/BMX

•

., .• •

•

806/BMX

•

821 /BM X

822/BMX

61

SUNDRY SPARE PARTS

80/1 gear fixing plate, 80/2 fixing plate tor « Super Record » <Nuevo Record " .. Rally I outinq »« Gran sport- and«980 .. gears, BOlA f ixing plate for "Valentino Extra» gear, 124 fixing screw, 125 clamp nut, 763 standard spro­cket for normal chain 1/ 2"xl l8" (3 mm). Sprockets available with 12-13 -1 4-15- 16 teeth. On request sprocketsfor chain 1/2"x3 /32 " (2 mm) are supplied, 763/A superlight sprocket for normal chain 1 /2 ~xl /8· (3 mm). spro­ckets available with 13-14-15-1 6 teeth. On requ est sprockets for chain 1/2 "x3/32 (2 mm) are supplied, 914clamp nut. 1030/2 pump connector with square base. 3346 superlight pump connector with square base. 3385100 grs. lin special grease, 3386 500 qrs. tin special grease, 3387 1 kg. tin special grease.

3385

t·,

3346

80/1

1030/2

914 125

3386

80/2

124

\F'3

80/ A

124-.

62

SUNDRY SPARE PARTS

145 gear cable for handlebar control, 171 clip bolt, 172 nut for clip bolt. 218 front changer cable for hand lebarconuot ecazt fixing clip bolt. 617 stainless steel outer casing for braze-on gear, 619 outer casing ferrule. 620spindled ferrule. 622 stainless steel outer casing for gear, 623 stainless steel outer casing for f ront changer, 625stainless steel outer casing for gear and front changer handlebar controls, 626/A twin gear cable clip, 6271Adown tu be gear clip, 629 top clip for gear and front changer handlebar control, 636 horizontal stay clip ,649 brakecable clip, 652 safety cab le, 777 nut. 201212 rear brake center bolt with modified axle, 2045 brake outer casingferrule.

626/A627/A

629

, l

n7 609/1 2045145 218

G - : I

, I '-EO' I::)

61 9 620 652

625 I 623

• 622'J.~ - I

,617•

649~.. I... I

i4 t2012/2

:= 0..171 172

63

TOOL CASE REDUCED

Watching a mechanic specialized in racing bicycles while he assembles on the frame all the components tomake of it a winning bicycle, one may realize how many specific tools to overhaul the frame on the couplingpoints. how many calipers to test the work mad e and the perfect squaring of all parts, are needed.Campaqnolo has manufactured , with the utmost prec ision,all the set of these tools and calipers to make a perfectbike.When a mechanic or a fan is in a position to use, as he must, atl the kit tools. the bicycle that originates is a« Master» bicycle.The reduced version si destined only to the filting of the headset and of the bottom bracket set.

,

3381

64

TOOL CASE

..•

3380

COMPLETE

/

•

65

TOOLS CONTAINED IN KITS

143/2 T wrench 6/8 mm, 704 insert for tool fig. I. 704/1 reducing insert for 13 teeth freewheel tool fig . I (it is sup­p lied only on specific request), 710 pedal wrench, 712* bottom bracket loc krinq and headset tool. 712/f * bot­tom bracket headset and L.H. cup tool, 712/2* p in for 712/1 tool, 712/3* spacing spring for headset too l. 713·bottom bracket R.H. cu p and pedal axle tool, 714 fork column die (specify thread), composed by: 714/1 fork co­lumn die (specify thread) and 714/2 die holder body, 718 crown race cutter composed by: 718/1 * crown racemill, 71812* Gutter holder with rotation lever, 718/3* guide ring, 718/5* tension spring, 718/6* threaded lockring(specify thread), 719 brush, 721* bottom bracket double tap (specify thread) composed by: 720* rotation lever,721/1 * tap body wi th stem, 721/2* tap body wi th stem guide hole,721/3* tap lock ring nut. 721/5 spare tap (spe­cify thread),722* headset cup punch , 723 headset cup remover,725* bottom bracket fac e cutter, composed by:724/1 * inner guide threaded sleeve for 725 (specify thread), 724/2* outer guide threaded sleeve for 725 (speci ­fy thread), 725/1 * mill, 725/2* cutter holder stem with rotation lever, 725/3* tens ion spring, 725/4* washer,725/7''' threaded lockring, 725/8* toothed washer, 729* fork crown race remover, 730* key for sleeve 724/ 1 and724/2 , 731 headset jig , 732 fork crown jig, 733 head race mill composed by: 725/8* toothed wa sher and 728sleeve for f itting headset cups wi th 733 tool, 0260/02* double head race mill, 733/3* cutter holder with rotationlever, 733/5* washer, 733/6* tension spring, 733/8* lockring stirrup, 733/14* cen traliser sleeve, 767* .. L ..shaped chainwheel allen key 5 mm, 768 chainw heel screw peg spanner, 769* cotterless bottom bracket axlespanner, 770* crank extractor, 771 double sadd le spanner, 793/A R.H. bottom bracket tool composed by, 793/1too l holder body with rotation lever, 793/2 36 mm tool, 793/3 cu tter sleeve, 793/4 tube for tool rotation, 2025special brake spanner, G straight edge for the alignment of the rudder pedals, H back stay tool for the perfectaliqnrnent of fork ends,composed by: H/1 stem with lever, H/4 spacerfor 120 mm width, H/4A additional spacerfor 125 mm width (to be coupled w ith H/4 spacer), H/5 cup, I tool for 14 teeth and other freewheels, composedby: 1/2 ring nut lever holder, N wheel d ish tool for checking the centering of the rim to the locknuts of hubs, P axleholding tool,a steel tool for cones and locknuts (s ize 13 -14 mm).On request size 15-1 6 mm is suppl ied ,R backstay too l for checking the R.H. fork end eyelet. composed by: R/1 screw, R/4 rotating rod, R/6 spind le w ith lever.

All tools marked wi th an asterisk (*) are those contained in the 338 1 reduced 1001kit.

D

718

c/

714/ 2

/718/ 2 L-- '3E1I _

[ " 716/ 1

732

731

719

0 n730 730

~,, •• , - -, -

712/3 729723

712

713

722

712 /1

712 , 2 <: ;:.~:::==]<'2"'~"~' "~'~*~

66

R 6

R 1

793/3

793/A

793/1

/'!

N

1{2

704

704/ 1 0>.(

720 -

721

721{1 721/2

-720

721/ 5 721/5

I I .~ (g:-t Fe)

I721/3 721/ 3

,725

-.793/2

767

H

H{1

770768

His

H/4 A

mm l 0 0

769

H'4

His mm. 120

H/4A mm.l

----- 793{4

/H{ 1

I

H

I

G

c725/ 4 725/ 8

It,{ ~I

725/3

725/1

724{1 724/ 2 725/ 7

r-'i'-;;;(. ~~' \ \,~

J '725/2

67

CAMPAGNOLO SPECIAL TOOLS

P axle hold ing tool, a steel tool for cones and locknuts (size 13-14 mm). On request size 15-16 mm is suppl~ed .

143/2 «T.. wrench (size 6-8 mm), 705 R.H. lap ¢ 9/ 16·x20 F.. 706 L.H. tap ¢ 9/16"x20 E, 707 lap ¢ 1Ox26 E,708 tap M 5xO,B, 709 tap M 3 xO.5. 710 pedal w rench. 736 saddle alignment tool to keep in posit ion the saddlewhen replacing the seat pin and the p in,77 1 double saddle spanner, 110' multip le pedal spanner composed by:110111 multiple head (15· 16- 17 mm), 110113 multiple spanner lever, 2025 special brake spanner.

736

F ,,

771

~771

Jl 705 1101/1

--,: r I 706

, A 707 1101

8 ••• • 708 •143/ 2 71 0 •••

709 ••••y~'; "-,.,

,I I i lI,J '

~ t 1 (,)'0

a 2025 p 1101/3

68

ROAD CHAIN LINE

i•

I•

m i.­I

I«

I

43 ,5

43 ,5

43,5

-

----------

--

2929 - ­

- ':::29'-- - --

-------

REAR HUBWIDTH ..A -

i20

120

120- -

68

__-,70

74

sorro« BRACKETWIDTH

~~~;;==2 -=- ----"c~; ' N',LJ \ I. _ ,---r-- 0

_. " (~~ . Ul I . '-'-'-'-'-'-'---;C:;E :~ T~E L:':C":-'- '-'+ +- - -I ~. -----. _

------ --------'- -

TRACK CHAIN LINE

•

<

,

CHAIN LINE-c-

•CENTRE LINE

I- -- L_-:;- '

-- -- cHii;';l;NE --=-..::--- iXl 1- /.-_. I -----.,;;,~;;. _ _

I ' Io

---

---I

---

---

BOTTOM BRACKET REAR HUB SPROCKETWIDTH wrOTH ..A.. WIDTH ..B ..

65 _~~- 110,-- 215_-~~:::__ 40

__68 110 __ 2 1.5 40

68 120 24 42,5

70 120 24 42 ,5

•

-.

:: : :

69

GEAR TABLE

•

Number Num ber of teeth on rear chamnnqof teeth

on sprocket12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32wheel

35 6.23 5.75 5,34 4,98 4.67 4,394,1 5 3,83 3,73 3,56 3,39 3,25 3,11 2,99 2,87 2.76 2,67 2,57 2,49 2,41 2,33

36 6,40 5,91 5,49 5,12 4,80 4,52 4,27 4,04 '3.84 3,66 3,49 3,34 3,20 3,07 2,95 2.84 2,74 2,65 2,56 2,48 2,40

37 6,58 6,07 5,64 5,26 4,93 4,64 4,39 4.15 3,95 3,76 3,59 3,43 3,29 3,16 3,03 2,92 2,62 ;2.72 2.63 12.54 2,46

38 6,76 6,24 5,79 5,4 1 5,07 4,77 4,50 4,27 4,05 3.84 3,68 3,52 3,38 3,24 3,123,00 2,89 2,79 2,70 2.61 2,53

39 6,94 6,40 5,94 5,55 5,20 4,90 4,62 4.38 4,16 3,96 3,78 3,62 3,47 3,33 3.20 3,08 2,97 2,81 2,77 2,68 2,60

40 7,12 6,57 6,10 5,69 5,34 5,02 4,74 4,50 4,27 4,07 3,88 3,71 3,56 3.42 3,28 3,16 3,05 2,94 2,83 2,75 2,6641 7.30 6.73 6,25 5,84 5,475,15 4,86 4,60 4,37 4,1 7 3,96 3,80 3,64 3,50 3,36 3,24 3.11 3,01 2,92 2,81 2.7542 7,47 6,90 6,40 5,96 5,60 5,27 4,98 4,72 4,48 4,27 4,07 3,90 3,73 3,58 3,45 3,33 3,20 3,09 2,96 2,88 2.7943 7,65 7,06 6,56 6,12 5,74 5,40 5,10 4,83 4,59 4,3 7 4,17 3,99'3,82 3,67 3,53 3,39 ,3,28 3,16 '3,05 2.96 2,86

44 7,83 7,23 '6,71 6.26 5.87 5,52 5,22 4,94 4,70 4,47 4.27 4,08 3,91 3,76 3,61 3,48 3,35 3.243,1 3 3,03 2.92

45 8,01 7.39 '6,86 6,40 6,00 5,65 5,34 5.05 4,80 4,57 4.37 4,1 8 4,00 3,84 3,69 3,56 3,43 3,30 3,20 3,09 3,01

46 8,18 7,55 7.01 6,55 6,14 5,78 5,45 5,17 4,91 4,6714,46 4,27 4,09 3,93 3.78 3,62 3,50 3,39 3.26 3,16 3,07

47 8,36 7,72 7,17 6,69 6.27 5,90 5.57 5,28 5,02 4,78 4,56 4.36 4,18 4.01 3,86 3,71 3,58 3,45 3,35 3,24 3.13

48 8,54 7,88 7,32 6,83 6,40 6,03 5.69 5,39 5,1 2 4,88 4,66 4,45 4,27:4.1 0 3,943,80 3,65 '3.54 3,4 1,3,28 3,20

49 8.72 18,05 7,47 6.97 6,54 6.15 5,81 5,50 5,23 4,96 4,75 4,55 4,36 4.1 8 4.02 3,86 3,73,3.60 3,48 3,37 3,26

50 8,90 8.21 7,63 7.12 6.67 6.28 5,9315.62 5,34 5,08 4.85 4,64 4,45 4.27 4.10 3,94 3,80 3.67 3,56 3,43 3,33

51 9,07 8,38 7,78 7.26 6,81 6,40 6.05 '5,73 5,44 5,18 4.9514.73 4,54 4,35 4.19 4,03 3,88 3,75 3,62 3,52 3,39

52 9.25 8,54 7,93 7,40 6.94 6,53 6,17 5,84 5.55 5,29 5,04 4,83 4,62 4,44 4.27 4,12 3,92 3,82 3.69 3,58 3.4553 9,43 8,70 8,08 7.54 7.07 6,66 6,29 5,95 5,66 5,39 5.14 4,9214.71 4,52 4.35 4,18 ,4,03 3,90 3,77 3,65 3,51

54 9,61 8,87 8,23 7,69 7,20 6,78 6,40 6,07 5,76 5,49 5,24 5.01 4,80 4,61 4,43 4,27 4,12 3,97 3,84 3.7113.60

55 9,78 9,03 8,39 7,83 17.34 6.91 6,52 6,10 5,87 5,59 5,34 5,10 4,89 4,69 4.51 4,34 4,19 4,05 3,91 3,79 3,66

56 9,97 9,20 8,54 7,97 7,47 7,03 6,64 6,29 5,98 5,69 5,43 5,20 4,98 4,78 4,60 4,41 4,27 4,1 2 3,99 3,86 3,73

57 10,14 9,35 8,68 8,11 7,62 7,15 6.76 6,40 6,08 5.78 5,53 5,29 5,06 4,86 4,67 4,50 4,33 4,20 4,05 3,92 3,80

58 10,31 9,52 8,83 8,26 7,72 7,28 6,87 6.51 6.19 5,89 5,63 5,38 5,16 4,95 4,76 4,59 4,4 1 4.27 4,1213,99 3,86

59 10,50 9.69 8,98 8,39 7,87 7,40 7,00 6,64 6,29 5,99 5,72 5A8 5,25,5,03 4,84 4.67 4.50 4,33 4.20 4.05 3,92

60 10,67 9,86 9.158,54 8,01 7,53 7,11 6.74 6,40 6,10 5,82 5,57 5,33 15,12 4,93 4.73 4.56 14.41 4,27 4,12 3,99

70

•\Ita della Chlmica, 436100 VICENZA - Italia

ecctete per azlonlCapitale SociaIe Lit. 16.000.000.000N. 11558 Reg. Soc. Tribunale di VicenzaTelefonc 0444/564933 (16 linee con r.a.)Telefax 0444/565062Telex 460074 CAMPA ITelegr. CAMPAGNOLO VICENZACasella Postale N. 822

•

t