1.What’s new in SmartTool? 2.What can SmartTool do for my borehole? 3.Meet the hardware 4.MeasureIT software that sets-up, runs, calculates & checks

Customer Training Course

The FLEXIT SmartTool

1. What’s new in SmartTool?

2. What can SmartTool do for my borehole?

3. Meet the hardware

4. MeasureIT software that sets-up, runs, calculates & checks.

5. Practical exercises with the SmartTool.

6. DisplayIT software, showing off the results.

7. The Single-shot StoreIT menus.

8. The Multi-shot StoreIT menus.

Training modules

1 What’s new --

SensIT probe -- sealed and unopenable

no plugs or cables

1 What’s new --

StoreIT data pad -- sealed in an Aquapac,

-- hung on a lanyard.

SensIT & StoreIT --ten years power - built in,

no batteries or chargers.

no plugs or cables

1 What’s new --

SensIT, StoreIT & your PC --

transfer data by automatic fast radio link.

1 What’s new --

Quality assurance system --

warns of magnetism or movement

1 What’s new --

Shock resistant to 6000G

1 What’s new --

SensIT in its pressure barrel

Watertight to 4000 metres

Shockproof to 6000g

2 What can SmartTool do for me? --

Four different tasks

Single-shot survey ----- read data on StoreIT ----- combine data on PC to make …

Multi-shot survey 3D hole path using magnetic azimuth measurement

Orientated survey ----- less than 30m, close to vertical 3D hole path maintaining azimuth with orientation rods

Tool or Core orientation, usingGravity roll angle ---- for inclined holesMagnetic toolface angle --- for vertical holes

Eight measurements at each DEPTH (shot) recorded by SensIT

1 Dip (Inclination) of hole 2 Direction (azimuth) of hole for Positional Survey

5 Magnetic field strength 6 Magnetic dip angle for Quality Assurance

3 Gravity Roll angle of SensIT 4 Toolface angle of SensIT for Orientation

7 Temperature of SensIT 8 Depth, time and datefor the record



Survey


Orientation Setting the zero Gravity Roll Angle


Orientation Setting the zero MagneticToolface Angle

The Earth’s Gravitational Field


Quality assurance.

The Earth’s Gravitational Field

If Grav. Field is not 1.00 G, then SensIT is moving; Dip and Azimuth may both be unreliable


Quality assurance.

The Earth’s magnetic field

Variation - angular difference between True North and Magnetic North

Magnetic Field Strength - the force of the earth's magnetic field

Magnetic Dip Angle - angle the field force lines make with the horizontal

At each place on the earth's surface, these values are known.


Quality assurance.

Set the threshold for the local magnetic environment


Quality assurance.

Identify the unreliable azimuths


Quality assurance.









Training modules









Training modules

DATA, Shows Survey SETTINGS #, Hole Ref. & Depth Timer } +/-

Azimuth Depth }3 +/

Inclination Hole ref. } +/- OK

Mag Field Enter Archive OK

Mag Dip Set Mag Field/Dip OK

G.R/angle Zero G.R/angle OK

M.T/face Zero M.T/face OK

Time Set time +/- OK

Date Set date +/- OK

Temperature Multi-shot mode? OK

>>Press SETTINGS to exit >>Press NEW to start timer

Here the DATA button displays each reading from a Single-shot survey.

7 The StoreIT Single-shot menus

First survey press New Next Survey press New

SETTINGS 1 Change SETTINGS 2 Change SETTINGS 3

Hole ref. } Next Depth Hole ref.

Start depth } Depth interval Start depth

Depth interval } 5 End survey Depth interval

Direction } >>Press DATA Direction

Time interval } to continue survey End session -download

Set time >>Press DATA

Set date for next survey

Single-shot mode?

>>Press DATA for first survey

• Here the DATA button is only a switch from the SETTINGS menus back to the survey operation. Then, to start a survey, press NEW

8 The StoreIT Multi-shot menus

Documents

1.What’s new in SmartTool? 2.What can SmartTool do for my borehole? 3.Meet the hardware 4.MeasureIT software that sets-up, runs, calculates & checks