2 Point Perspective Drawing: Step by Step Guide for Beginners

Perspective drawing is a vital artistic technique if you’re interested in conveying spatial

representations on paper. Today you’ll learn the 2 Point Perspective method of drawing by

means of simple Step by Step instruction!

Defining Two Point Perspective

Two Point Perspective is a type of linear perspective. This 2pt drawing method is defined by 2

vanishing points .All parallel lines meet on each vanishing point. Parallel lines are two lines

going in the same direction but never meet. In Art we make parallel lines meet, and the

point where these lines meet are called vanishing points. Two point perspective simply

means two vanishing points!

Perspective Color-coded Key

Use this color key to guide you through both step by step perspective drawing tutorials below.

Drawing A House Using 2pt. Perspective

Learning to draw a simple house in proper perspective is a great exercise. We’ll start off

constructing a simple box (rectangular solid). We’ll then turn this box into a house by adding

details such as a roof, a door and a walkway!

STEP 1

The first thing you need to do is to establish your horizon line and two vanishing points. For

now you can draw the horizon line near the center of your paper. You’re going to want to place

your vanishing points as far apart as possible and both points need to be drawn on the horizon

line.

The horizon line is a horizontal line that represents eye level.

STEP 2

Next you should draw the closest corner of the house. This is nothing more than a vertical line.

STEP 3

To create the front side of the house you should connect the top and bottom ends of your vertical

line to the left-hand vanishing point.

STEP 4

You’ll have to decide how far back this wall extends. Pick a distance and end the side with a

vertical line. Remember that all vertical lines in this drawing will be parallel to each other.

STEP 5

Repeat the same procedure for the other side of the house / box. These lines can be seen below in

green.

It’s worth reminding that I have color-coded then entire drawing. Notice how the red lines are

drawn to the left-hand vanishing point, the green lines are drawn to the right-hand vanishing

point and the black lines are all perfectly vertical and parallel to each other.

STEP 6

The top of the box can be drawn by connecting the remaining top corners to their appropriate

vanishing points. Check out the diagram below!

STEP 7

At this point in the drawing it would be a good idea to clean things up a bit. Erase any extra

lengths you have on your lines.

STEP 8

Finding the middle of something that is drawn in 2 point perspective is not as easy as measuring

it. Because a perspective drawing accounts for visual space, things need to get smaller as they

recede away from the viewer of the drawing. To put this another way, the back half of the box

needs to be smaller than the front half!

Draw the spatial perspective properly!

Fortunately there’s an easy way to do this. Borrowing a simple technique from geometry we can

find the perspective middle of our box by connecting opposite corners. This lines (yellow) are

only temporary so you should draw them very lightly.

STEP 9

Next, with a perfectly vertical line you want to intersect the perspective middle of the box. This

divides the box into two halves that are properly compensated in size for your perspective

drawing.

Get used to the procedure for calculating perspective middles. You’ll end up using this technique

often!

STEP 10

Now that you have the middle of the box located, you can add a door. There! Now this box is

starting to resemble a house.

STEP 11

Before you attempt to draw a roof you need to calculate the perspective middle. Check out the

yellow lines drawn below. I’m using the same procedure we used to position the door.

STEP 12

At this stage of the drawing you can decide how tall or how much pitch the roof will have. Pick a

point somewhere on the perspective middle (the tall yellow line). Next you’ll connect that point

to each of the top two corners of the right wall. (drawn in purple)

STEP 13

Next we’ll construct the ridge line portion of the roof. That’s the highest part of the roof. This is

simple. Just connect the point you established in the previous step to the left-hand vanishing

point.

Note: The next 3 steps require special attention. Most people fake or guess the angle and

positioning for the final line that constructs the roof. But, there is a precise way to draw it. It

requires some extra, temporary lines but is worth learning. Watch this…

STEP 14

You are going to construct the back wall of the house even though we can’t really see it. Do this

lightly.

STEP 15

Now divide that wall into its perspective halves.

STEP 16

Where the vertical line representing the perspective half (yellow) intersects with the ridgeline

(red) that is where the final line should be directed to. Simply note the intersection and connect it

to the remaining left-hand corner. I’m doing this in purple.

STEP 17

Good job! I’m sure you’ve got some extra lines drawn. Erase them before continuing please.

STEP 18

Finally you can invite some guests into our house drawing by adding a walkway. Keep your cool

and don’t just make up your own angles. Make sure you are drawing your lines to the proper

vanishing point.

STEP 19

You can even draw a direction change in the walkway. My house has a walkway that very

similar to this one! Notice how I’m using the other vanishing point to create the direction change

in the walkway?

STEP 20

If your drawing is all caught up fantastic! Now you need to challenge yourself. Can you add

some windows to the front and side of your house? How can you divide up the space so that they

are positioned symmetrically yet compensate for perspective? (Hint use the “x” finding middle

technique repeatedly)

Drawing a Bedroom in 2pt Perspective

How about a Two Point Perspective Bedroom?

Drawing the house showed you how to draw an exterior of a building but what about drawing

interiors in two point perspective? Let me show you a simple step by step example for drawing a

simple interior…

STEP 1

The first step you need to accomplish is to establish your horizon line and two vanishing

points. For now you can draw the horizon line near the center of your paper. You’re going to

want to place your vanishing points as far apart as possible and both points need to be drawn on

the horizon line.

Remember: the horizon line is the horizontal line that represents eye level to the viewer.

Anything placed below this line and we’ll see the top. Anything placed above the horizon line

and we won’t see the top, but will see the bottom. This is assuming of course that the top and/or

bottom planes are visible.

STEP 2

Next you should draw the farthest corner of the bedroom’s interior. This can be anywhere in

between the two vanishing points but for now we’ll put it near the middle. I’ll represent this

vertical line using the color black.

STEP 3

To draw an interior wall of the bedroom, connect the top and bottom of the vertical line to a

vanishing point. When drawing interiors, walls go to opposite corners. This tends to confuse

beginners so pay special attention here. The wall on the left gets connected to the vanishing

point on the right.

STEP 4

Now you can draw the other wall. Remember that I’m color-coding things here so you can follow

along with no problems!

The color key is located above.

Have you noticed that I’ve drawn the lines that represent the walls in perspective so that they

trail off and don’t really end anywhere?

This is because when you are inside a room you generally can’t see the beginning of the walls.

They usually start behind your field of vision and emerge into view.

STEP 5

With the empty shell of the room drawn we can now add perspective elements. Let’s turn this

empty box into a bedroom! Let’s draw a bed. A bed is nothing more than a box. We can use our

vanishing points to draw it. We can start by laying out the frontal plane of the bed.

STEP 6

Next you can draw the other side of the bed.

STEP 7

Finally, use your pencil and ruler to draw the top of the bed. Don’t guess at the angles. Use the

vanishing points when drawing your 2 point perspective bedroom!

Yep, it’s nothing more than a box! (btw… you can add hand drawn details later such as pillows,

sheets, etc.)

STEP 8

It would be wise to clean up the drawing. You should erase the parts of the wall that would be

blocked by the bed.

STEP 9

You need a doorway to get into your bedroom perspective drawing! Let’s add a doorway now!

STEP 10

You can even use one of the vanishing points to make it look like the door is open.

Pretty cool huh?

STEP 11

A bedroom wouldn’t be complete without a window. Make sure you are still using the vanishing

points. Here… I’ll show you below…

STEP 12

Finally you can erase any extra lines you had used in the creation of the window.

STEP 13

How about adding some cool posters to your bedroom wall? Remember that in a perspective

drawing everything has a very controlled presentation. You pick the size and placement of the

poster but it has to be drawn to one of the vanishing points.

It’s now your turn to add more elements to your drawing of a bedroom. What else belongs there

that can be drawn using the two point perspective method? Take your time and be creative!

Need some ideas? Try drawing a few of these items:

• Posters

• Desk

• Night stand

• Alarm clock

• Tv & video game console

• Throw rug

• Book shelves