Upload
others
View
49
Download
1
Embed Size (px)
Citation preview
All Rights reserved @ www.clslearn.com , Contact us : [email protected] , +201000216660 , +201001692348
Course Overview
200-301 Cisco Certified Network Associate CCNA Duration:100 Hours
Schedule :Full Day Morning ( 9-5)
Half Day Evening (6-10)
Weekends Full Day (10-4)
Instructor-Led
Hands-On Training
Delivery Options:
In CLS Classroom.
On site Classroom.
Online Live.
Your Training Comes with
a 100% Satisfaction
Guarantee!
The Implementing and Administering Cisco Solutions (CCNA) v1.0 course gives you a
broad range of fundamental knowledge for all IT careers.
* Through a combination of lecture, hands-on labs, and self-study, you will learn how to
install, operate, configure, and verify basic IPv4 and IPv6 networks.
* The course covers configuring network components such as switches, routers, and
wireless LAN controllers; managing network devices; and identifying basic security
threats.
* The course also gives you a foundation in network programmability, automation, and
software-defined networking.
* This course helps you prepare to take the 200-301 Cisco® Certified Network Associate
(CCNA®) exam. By passing this one exam, you earn CCNA certification. The 200-301
CCNA exam goes live on February 24, 2020.
* The new CCNA certification replaces these certifications:
* CCNA Cloud
* CCNA Collaboration
* CCNA Data Center
* CCNA Industrial
* CCDA
* CCNA Routing and Switching
* CCNA Security
* CCNA Service Provider
* CCNA Wireless
All Rights reserved @ www.clslearn.com , Contact us : [email protected] , +201000216660 , +201001692348
Course Outline
* Exploring the Functions of Networking* Introducing the Host-to-Host Communications Model* Operating Cisco IOS Software* Introducing LANs* Exploring the TCP/IP Link Layer* Starting a Switch* Introducing the TCP/IP Internet Layer, IPv4 Addressing, and Subnets* Explaining the TCP/IP Transport Layer and Application Layer* Exploring the Functions of RoutingConfiguring a Cisco RouterExploring the Packet Delivery Process* Troubleshooting a Simple Network* Introducing Basic IPv6
* Configuring Static Routing* Implementing VLANs and Trunks* Routing Between VLANs* Introducing OSPF* Building Redundant Switched Topologies* Improving Redundant Switched Topologies with Ether Channel* Exploring Layer 3 Redundancy* Introducing WAN Technologies* Explaining Basics of ACL* Enabling Internet ConnectivityIntroducing QoS* Explaining Wireless Fundamentals* Introducing Architectures and Virtualization
* Explaining the Evolution of Intelligent Networks* Introducing System Monitoring* Managing Cisco Devices* Examining the Security Threat Landscape* Implementing Threat Defense Technologies* Securing Administrative Access* Implementing Device Hardening
All Rights reserved @ www.clslearn.com , Contact us : [email protected] , +201000216660 , +201001692348
Lab Outline
* Get Started with Cisco Command-Line Interface (CLI)* Observe How a Switch Operates* Perform Basic Switch Configuration* Implement the Initial Switch Configuration* Inspect TCP/IP Applications* Configure an Interface on a Cisco Router* Configure and Verify Layer 2 Discovery Protocols* Implement an Initial Router Configuration* Configure Default Gateway* Explore Packet Forwarding* Troubleshoot Switch Media and Port Issues* Troubleshoot Port Duplex Issues* Configure Basic IPv6 Connectivity* Configure and Verify IPv4 Static Routes* Configure IPv6 Static Routes* Implement IPv4 Static Routing* Implement IPv6 Static Routing* Configure VLAN and Trunk
* Troubleshoot VLANs and Trunk* Configure a Router on a Stick* Implement Multiple VLANs and Basic Routing Between the VLANs* Configure and Verify Single-Area OSPF* Configure and Verify Ether Channel* Improve Redundant Switched Topologies with Ether Channel* Configure and Verify IPv4 ACLs* Implement Numbered and Named IPv4 ACLs* Configure a Provider-Assigned IPv4 Address* Configure Static NAT* Configure Dynamic NAT and Port Address Translation (PAT)* Implement PAT* Log into the WLC* Monitor the WLC* Configure a Dynamic (VLAN) Interface* Configure a DHCP Scope* Configure a WLAN* Define a Remote Access Dial-In
User Service (RADIUS) Server* Explore Management Options* Explore the Cisco DNA™ Center* Configure and Verify NTP* Configure System Message Logging* Create the Cisco IOS Image Backup* Upgrade Cisco IOS Image* Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI* Secure Console and Remote Access* Enable and Limit Remote Access Connectivity* Secure Device Administrative Access* Configure and Verify Port Security* Implement Device Hardening
All Rights reserved @ www.clslearn.com , Contact us : [email protected] , +201000216660 , +201001692348
Course Outcome Audience Profile
After taking this course, you should be able to:
* Identify the components of a computer network and describe
their basic characteristics
* Understand the model of host-to-host communication
* Describe the features and functions of the Cisco Internetwork
Operating System (IOS®) software
* Describe LANs and the role of switches within LANs
* Describe Ethernet as the network access layer of TCP/IP and
describe the operation of switches
* Install a switch and perform the initial configuration
* Describe the TCP/IP Internet layer, IPv4, its addressing scheme,
and sub netting
* Describe the TCP/IP Transport layer and Application layer
* Explore functions of routing
* Implement basic configuration on a Cisco router
* Explain host-to-host communications across switches and routers
* Identify and resolve common switched network issues and
common problems associated with IPv4 addressing
* Describe IPv6 main features and addresses, and configure and
verify basic IPv6 connectivity
- Network administrators- Network support engineers- Network engineer associates- Network specialists- Network analysts
Prerequisites
We recommend but do not require that you have the following knowledge and skills before taking this course:- Basic computer literacy- Basic PC operating system navigation skills- Basic Internet usage skills- Basic knowledge of IP addressing
All Rights reserved @ www.clslearn.com , Contact us : [email protected] , +201000216660 , +201001692348
We select the best instructors, who are certified from trustworthy
international vendors. They don’t only provide training program, but they
also share their professional experience with the students, so they can have
hands-on experience on the job market.
CLS facilities are well-equipped with strong hardware and software
technologies that aid both students and trainers lead very effective
smooth training programs.
We provide our clients with the best solutions, Our team of training advisers
answer whatever questions you have.
We have been in the market since 1995, and we kept accumulating
experience in the training business, and providing training for more than
100,000 trainees ever since, in Egypt, and the MENA region.
CLS is an authorized and accredited partner by technology leaders like
Microsoft, EC-Council, Adobe and Autodesk. This means that our
training programs are of the highest quality source materials, the most
up-to-date, and have the highest return on investment ever possible.
We keep tabs on every change in the market and the technology field,
so our training programs will always be updated up to the World-class
latest standards, and adapted to the global shape-shifting job market.
Our clients prefer our training programs not only for the quality
education they get, but also because they are cost effective.
All Rights reserved @ www.clslearn.com , Contact us : [email protected] , +201000216660 , +201001692348