1

2008 College of Engineering & Computer Science

Publications

Books

Chebbykin, O., G. Bedny and W. Karwowski (Eds), Ergonomics and Psychology: Developments in

Theory and Practice, Taylor & Francis, CRC Press:FL, 2008, 412 pages.

Adjeroh, D., T. Bell and A. Mukherjee, The Burrows –Wheeler Transform: Data Compression, Suffix

Arrays, and Pattern Matching, Springer:NY, 2008, 352 pages.

Javed, O. and M. Shah, Automated Multi-Camera Surveillance: Algorithms and Practice, Springer: NY, 2008, 104 pages.

Book Chapters

Craiger, P., Training and Education in Digital Forensics, in: J. Barbara (Ed). Handbook of Digital and

Multimedia Evidence. Humana Press, Totowa:NJ, 2008, pp. 11-22.

Craiger, P., P. Burke, C. Marberry and M. Pollitt, A Virtual Digital Forensics Lab, in: I. Ray and S.

Shenoi (Eds). Advances in Digital Forensics IV. Springer, New York:NY, 2008, pp. 357-370.

Bedny, G. and W. Karwowski, Application of Systemic-Structural Theory of Activity to Design and

Management of Work Systems, in: W. Gasparski (Ed). Praxiology and the Philosophy of Technology.

Transaction Publishers, New Brunswick:NJ, 2008, pp. 97-144.

Kantola, J., K. Czainska, W. Karwowski and H. Vanharanta, International Competence Development

Project for Emergency Response Personnel, in: Karwowski, W. and Trzcielinski, S. (Eds.). Value Stream Activities Management. IEA Press, Madison:WI, 2008, pp. 536-543.

Karwowski, W., Building Sustainable Human-Centered Systems: A Grand Challenge for the Human Factors and Ergonomics in the Conceptual Age, in: K. Zink (Ed). Corporate Sustainability as a Challenge

for Comprehensive Management, Springer, Heilderberg:Germany, 2008, pp.117-126.

Shevtshenko, E., R. Zahharov, T. Karaulova and Y. Wang, Advanced Concepts Integration for the Compression of Construction Project Schedule, in: B. Katalinic, (Ed). DAAAM International Scientific

Book 2008. DAAAM International, Vienna:Austria, 2008, pp.759-772.

Hughes, D., C. Jerome, C.E. Hughes and E. Smith, The Application and Evaluation of Mixed Reality

Simulation, in: D. Schmorrow, J. Cohn, D. Nicholson (Eds). The PSI Handbook of Virtual Environments

for Training and Education: Developments for the Military and Beyond Volume 3. Praeger Security International, Westport:CT, 2008, pp. 254-277.

Walters, L., E. Smith and C.E. Hughes, The Future of Museum Experiences, in: D. Schmorrow, J. Cohn,

D. Nicholson (Eds). The PSI Handbook of Virtual Environments for Training and Education: Developments for the Military and Beyond. Praeger Security International, Westport:CT, 2008, pp. 444-

452.

2

Refereed Journal Publications

Civil, Environmental and Construction Engineering (CECE)

Abdel-Aty, M., R. Cunningham and V. Gayah, “Considering Dynamic Variable Speed Limit Strategies

For Real-time Crash Risk Reduction On Freeways,” Journal of the Transportation Research Board, Vol. 2078, 2008, pp.108-116.

Aviram, A., K.R. Mackie and B. Stojadinovic, “Effect of abutment modeling on the seismic response of bridge structures.” Earthquake Engineering and Engineering Vibration, Vol. 7, No. 4, 2008, pp. 395-

402.

Catbas, F.N., M. Gul and J. Burkett, “Conceptual Damage-Sensitive Features for Structural Health Monitoring: Laboratory and Field Demonstrations,” Journal of Mechanical Systems and Signal

Processing, Vol. 22, 2008, pp. 1650-1669.

Catbas, F.N., M. Gul and J. Burkett, “Structural Condition Assessment: Phenomenological Model

Development and Laboratory Studies,” Journal of Smart Materials & Systems, Vol. 17, 2008, pp. 12.

Catbas, F.N., M. Susoy and D. Frangopol, “Structural Health Monitoring and Reliability Estimation:

Long Span Truss Bridge Application with Environmental Monitoring Data,” Journal of Engineering

Structures, Vol. 30, 2008, pp. 2347-2359.

Chandra, R.S. and H. Al-Deek, “Cross Correlation Analysis and Multivariate Prediction of Spatial Time

Series of Freeway Traffic Speeds,” Journal of the Transportation Research Board, Vol. 2061, 2008, pp.

64-76.

Chang, N.B., “Economic and Policy Instrument Analyses in Support of the Scrap Tires Recycling

Program in Taiwan,” Journal of Environmental Management, Vol. 86, 2008, pp. 435-450.

Chang, N.B. and E. Davila, “Municipal Solid Waste Characterization and Management Strategy for the

Lower Rio Grande Valley, Texas,” Waste Management, Vol. 28, 2008, pp. 776-794.

Chang, N.B. and E.A. Hernandez, “Optimal Expansion Strategy for a Sanitary Sewer System under

Uncertainty,” Environmental Modeling and Assessment, Vol. 13, No. 1, 2008, pp. 93-113.

Chang, N.B., G. Parvathinathan and J.B. Breeden, “Combining GIS with Fuzzy Multiple Attribute

Decision Making for Landfill Siting in a Fast Growing Urban Region,” Journal of Environmental

Management, Vol. 87, 2008, pp. 139–153.

Chang, N.B., K.R. Srilakshmi and G. Parvathinathan, “Comparison of Models of Simazine Transport and

Fate in Subsurface Environment in a Citrus Farm,” Journal of Environmental Management, Vol. 86,

2008, pp. 27-43.

Chang, N.B., M. Wanielista, F. Hossain, L. Zhai and K.S. Lin, “Integrating Nanoscale Zero Valent Iron

and Titanium Dioxide for Nutrient Removal in Stormwater Systems,” NANO Brief Reports and Reviews, Vol. 3, No. 4, 2008, pp. 297-300.

Chen, J.C., W.H. Chen and N.B. Chang, “Diagnosis Analysis of a Small-scale Incinerator by Neural

Networks Model,” Civil Engineering and Environmental Systems, Vol. 25, No. 3, 2008, pp. 201–213.

3

Dixit, V., A. Pande, E. Radwan and M. Abdel-Aty, “Understanding the Impact of a Recent Hurricane on

Mobilization Time During a Subsequent Hurricane,” Journal of the Transportation Research Board, Vol. 2041, 2008, pp. 49-57.

Du, Q., N.B. Chang, C.H. Yang and K.R. Srilakshmi, “Combination of Multispectral Remote Sensing,

Variable Rate Technology and Environmental Modeling for Citrus Pest Management,” Journal of Environmental Management, Vol. 86, 2008, pp. 14-26.

Funakoshi, Y., S.C. Hagen and P. Bacopoulos, “Coupling of Hydrodynamic and Wave Models: A Case Study for a Hurricane Floyd (1999) Hindcast,” Journal of Waterway, Port, Coastal, and Ocean

Engineering, Vol. 134, No. 6, November/December 2008, pp. 321-335.

Gul, M. and F.N. Catbas, “Ambient Vibration Data Analysis for Structural Identification and Global

Condition Assessment,” Journal of Engineering Mechanics, Vol. 134, No. 8, 2008, pp. 650-662.

Harb, R., E. Radwan, X. Yan, M. Abdel-Aty and A. Pande, “Environment, Drivers, and Vehicles’ Risk Analysis for Freeway Work-Zone Crashes,” ITE Journal, Vol. 78, No. 1, 2008, pp. 26-30.

Harb R., E. Radwan, X. Yan, A. Pande and M. Abdel-Aty, “Freeway Work-Zone Crash Analysis and Risk Identification Using Multiple and Conditional Logistic Regression,” ASCE Journal of

Transportation Engineering, Vol. 134, No. 5, 2008, pp. 203-214.

Jessen, A., A. Randall, D. Reinhart and L. Daly, “Effectiveness And Kinetics Of Ferrate As A

Disinfectant For Ballast Water,” Water Environment Research, Vol. 80, No. 6, 2008, pp. 61-69.

Khalafallah, A., “Neural Network Based Model for Predicting Housing Market Performance,” Tsinghua Science and Technology Journal, Vol. 13, No. S1, 2008, pp. 325-328.

Khalafallah, A. and K. El-Rayes, “Maximizing Security of Operating Airports during Expansion Projects,” Journal of Construction Engineering and Management, Vol. 134, No. 1, 2008, pp. 40-48.

Ko, A. and N.B. Chang, “Optimal Planning of Co-Firing Alternative Fuels with Coal in a Power Plant by

Grey Nonlinear Mixed Integer Programming Model,” Journal of Environmental Management, Vol. 88, 2008, pp. 11-27.

Lee, C. and M. Abdel-Aty, “Presence of passengers: Does it increase or reduce driver's crash potential?” Accident Analysis & Prevention, Vol. 40, No. 5, 2008, pp. 1703-1712.

Lee, C. and M. Abdel-Aty, “Testing Effects of Warning Messages and Variable Speed Limits on Driver Behavior Using Driving Simulator,” Journal of the Transportation Research Board, Vol. 2069, 2008, pp.

55-64.

Lin, K.S. and N.B. Chang, “Control of PCDDs/PCDFs in a Fluidized Bed Incinerator via Activated Carbon Injection in Petrochemical Industry,” Petroleum Science and Technology, Vol. 26, No. 7/8, 2008,

pp. 764-789.

Lin, K.S., N.B. Chang and T.D. Chuang, “Fine Structure Characterization of Zero-Valent Iron

Nanoparticles for Decontamination of Nitites and Nitrates in Wastewater,” Science and Technology for

Advanced Materials, Vol. 9, 2008, pp. 1-9.

Lin, K.S., T.D. Chuang and N.B. Chang, “Decontamination of Nitrates and Nitrites in Wastewater by

Zero-Valent Iron Nanoparticles,” NANO Brief Reports and Reviews, Vol. 3, No. 4, 2008, 291-295.

4

Lin, K.S., C.C. Lo and N.B. Chang, “Synthesis and Characterization of Titania Nanotube for Dye Wastewater Treatment,” NANO Brief Reports and Reviews, Vol. 3, No. 4, 2008, pp. 257-262.

Makkeasorn, A., N.B. Chang and X. Zhou, “Short-term Stream Flow Forecasting with Global Climate

Change Implications – A Comparative Study between Genetic Programming and Neural Network Models,” Journal of Hydrology, Vol. 352, 2008, pp. 336-354.

Nalamothu, R.C., D.R. Reinhart, R.L. Wayson, A. Martin and M. Rogoff, “Urban Infilling Impacts on Florida Solid Waste Facilities,” MSW Management, Vol. 18, No. 7, 2008, pp. 60-71.

Nezamuddin, N. and H. Al-Deek, “Developing Microscopic Toll Plaza and Toll Road Corridor Model with PARAMICS,” Journal of the Transportation Research Board, Vol. 2047, 2008, pp. 100-110.

Pande, A. and M. Abdel-Aty, “A Computing Approach Using Probabilistic Neural Networks for

Instantaneous Appraisal of Rear-End Crash Risk,” Computer-Aided Civil and Infrastructure Engineering, Vol. 23, No. 7, 2008, pp. 549-559.

Pande, A. and M. Abdel-Aty, “Market Basket Analysis of Crash Data from Large Jurisdictions and its Potential as a Decision Support Tool,” Safety Science, Vol. 47, No. 1, 2008, pp. 145-154.

Shan, H., G.T. Yeh, G. Hu and T.S. Wu, “An Integrated Model for Flow and Transport in Surface Water, Groundwater, and Overland Regimes,” Journal of Coastal Research, No. 52, 2008, pp. 95-106.

Suk, H. and G.T. Yeh, “Multiphase Flow Modeling with General Boundary Conditions and Phase

Configuration Changes Using Fractional Flow Approaches,” Computers and Geosciences, Vol. 12, 2008, pp. 541-571.

Wang, X. and M. Abdel-Aty, “Analysis of Left-Turn Crash Injury Severity by Conflicting Pattern Using Partial Proportional Odds Models,” Accident Analysis & Prevention, Vol. 40, No. 5, 2008, pp. 1674-

1682.

Wang, X. and M. Abdel-Aty, “Modeling Left-Turn Crash Occurrence at Signalized Intersections by Conflicting Patterns,” Accident Analysis and Prevention, Vol. 40, No. 1, 2008, pp. 76-88.

Weng, Y.C., N.B. Chang and T.Y. Lee, “Nonlinear Time Series Analysis of Ground-Level Ozone Dynamics in Southern Taiwan,” Journal of Environmental Management, Vol. 87, No. 3, 2008, pp. 405-

414.

Wu, C.C. and N.B. Chang, “Evaluation of Environmentally Benign Production Program in the Textile

Dying Industry (II): a Multi-objective Programming Approach,” Civil Engineering and Environmental

Systems, Vol. 25, No. 1, 2008, pp. 299–322.

Yan, X., M. Abdel-Aty, E. Radwan, X. Wang and P. Chilakapati, “Validating a Driving Simulator Using

Surrogate Safety Measures. A Simulator Validity Study,” Accident Analysis & Prevention, Vol. 40, No.

1, 2008, pp. 274-288.

Yan, X., R. Harb and E. Radwan, “Analyses of Factors of Crash Avoidance Maneuvers Using the

General Estimates System,” Traffic Injury and Prevention, Vol. 9, No. 2, 2008, pp. 173-180.

5

Yan, X. and E. Radwan, “Characteristics of Unprotected Left-turn Accidents at Signalized

Intersections,” International Journal of Injury Control and Safety Promotion, Vol. 15, No. 1, 2008, pp. 45-48.

Yan, X. and E. Radwan, “Influence of Restricted Sight Distances on Permitted Left-Turn Operation at

Signalized Intersections,” Journal of Transportation Engineering of the American Society of Civil Engineers, Vol. 134, No. 2, 2008, pp. 68-76.

Yan, X., E. Radwan, F. Zhang and J. Parker, “Evaluation of Dynamic Passing Sight Distance Problem Using Finite Element Model,” Journal of Transportation Engineering of the American Society of Civil

Engineers, Vol. 134, No. 6, 2008, pp. 225-235.

Zhang, C., Y. Chen, A.A. Randall and G. Gu, “Anaerobic Metabolic Models for Phosphorus- and

Glycogen Accumulating Organisms With Mixed Acetic and Propionic Acids as Carbon Sources,” Water

Research, Vol. 42, 2008, pp. 3745-3756.

Zhang, F., G.T. Yeh, J.C. Parker and P.M. Jardine, “A Reaction-Based River/Stream Water Quality

Model: Model Development and Numerical Schemes,” Journal of Hydrology. Vol. 348, 2008, pp. 496–

509.

Zhang, F., L. Jiang and G.T. Yeh, “An Adaptive Local Grid Refinement and Peak/Valley Capture

Algorithm to Solve Transport Problems with Moving Sharp-Fronts,” Journal Transport in Porous Media, Vol. 72, 2008, pp. 53-69.

Electrical Engineering and Computer Science (EECS)

Abdel-Rahman, O., J. Abu-Qahouq, L. Huang and I. Batarseh, “Analysis and Design of Voltage Regulator With Adaptive FET Modulation Scheme and Improved Efficiency,” IEEE Transactions on

Power Electronics, Vol. 23, No. 5, 2008, pp. 896-906.

Adams, I.S., P. Gaiser and W. L. Jones, “Simulation of the Stokes Vector in Homogeneous Precipitation,” Radio Science, Vol. 43, 2008, pp. 1-15.

Ahmed, J., M.N. Jafri, M. Shah and M. Akbar, “Real-time Edge Enhanced Dynamic Correlation and Predictive Open-loop Car-following Control for Robust Tracking, “ Machine Vision and Applications,

Vol. 19, 2008, pp. 1-25.

Allen, E., R. Bodik, K. Bruce, K. Fisher, S. Freund, R. Harper, C. Krintz, S. Krishnamurthi, J. Larus, D.

Lea, G. Leavens, L. Pollock, S. Reges, M. Rinard, M. Sheldon, F. Turbak and M. Wand, “SIGPLAN

programming language curriculum workshop: Discussion Summaries and recommendations,” ACM

SIGPLAN Notices, Vol. 43, No. 11, 2008, pp. 6-29.

Alnasser, M. and H. Foroosh, “Phase Shifting for Non-Separable 2D Haar Wavelets,” IEEE Transactions

on Image Processing, Vol. 17, No. 7, 2008, pp. 1061-1068.

Anna, K. and M. Bassiouni, “A New Framework for QoS Provisioning in WLANS using P-Persistent

802.11 MAC,” Journal of Computer Communications, Vol. 31, No. 17, 2008, pp. 4035-4048.

Babenko, P. and M. Shah, “MinGPU: A Minimum GPU Library for Computer Vision,” Journal of Real-

Time Processing, Vol. 3, 2008, pp. 255-268.

6

Bag, A. and M. Bassiouni, “Hotspot Preventing Routing Algorithm for Delay-sensitive Applications of

In-vivo Biomedical Sensor Networks,” Journal of Information Fusion, Special Issue on Distributed Sensor Networks, Vol. 9, No. 3, July 2008, pp. 389-398.

Bai, X., L. Bölöni, D.C. Marinescu, H.J. Siegel, R.A. Daley and I.J. Wang, “Utility and Price Based

Resource Allocation Models for Large-Scale Distributed Systems,” Journal of Parallel and Distributed Computing, Vol. 68, No. 2, 2008, pp.182-199.

Bai, X., H. J. Siegel, R.E. Daley and J. Wang, “A Macroeconomic Model for Resource Allocation in Large Scale Distributed Systems,” Journal of Parallel and Distributed Computing, Vol. 68, 2008, pp.

182-199.

Basharat, A., Y. Zhai and M. Shah, “Content Based Video Matching using Spatiotemporal Volumes,”

Computer Vision and Image Understanding, Vol. 110, No. 3, 2008, pp. 360-377.

Behal, A, J. Chen and D. Dawson, “A Novel Path Planning and Control Framework for Passive Resistance Therapy with a Robot Manipulator,” International Journal of Systems Science, Vol. 39, No.

6, 2008, pp. 639-653.

Bölöni, L., L.J. Luotsinen, J.N. Ekblad, T.R. Fitz-Gibbon, C. Houchin, J. Key, M.A. Khan, J. Lyu, J.

Nguyen, R. Oleson, G. Stein, S. Vander Weide and V. Trinh, “A Comparison Study of 12 Paradigms for

Developing Embodied Agents,” Software: Practice and Experience, Vol. 38, No. 3, 2008, pp. 259-305.

Bölöni, L. and D. Turgut, “Should I Send Now or Send Later? A Decision-Theoretic Approach to

Transmission Scheduling in Sensor Networks with Mobile Sinks,” Wireless Communications and Mobile

Computing Journal, Vol. 8, No. 3, 2008, pp. 385-403.

Brigham, R. and R.D. Dutton, “Bounds on Powerful Alliance Numbers,” ARS Combinatoria, Vol. 88,

2008, pp. 135-159.

Cakmakci, O., B. Moore, H. Foroosh and J.P. Rolland, “Optimal Local Shape Description for

Rotationally Non-Symmetric Optical Surface Design and Analysis,” Optics Express, Vol. 16, No. 3,

2008, pp. 1583-1589.

Cakmakci, O., S. Vo, H. Foroosh and J.P. Rolland, “Application of Radial Basis Functions to Shape

Description in a Dual-Element Off-Axis Magnifier,” Optics Letters, Vol. 33, No. 11, 2008, pp. 1237-1239.

Cami, A. and N. Deo, “Techniques for Analyzing Dynamic Random Graph Models of Web-like

Networks: An Overview,” NETWORKS, Vol. 51, 2008, pp. 211-255.

Chen, J., A. Behal and D.M. Dawson, “Robust Feedback Control for a Class of Uncertain MIMO

Nonlinear Systems,” IEEE Transactions on Automatic Control, Vol. 53, No. 2, 2008, pp. 591-596.

Do, T., K.A. Hua and M. Tantaoui, “Robust Video-on-Demand Streaming in Peer-to-Peer

Environments,” Computer Communications Journal, Vol. 31, No. 3, 2008, pp. 506-519.

Dutton, R.D., R. Lee and R.C. Brigham, “Bounds on a Graph's Security Number,” Discrete Applied

Mathematics, Vol. 156, No. 5, 2008, pp. 695-704.

Elva, R. and D. Workman, "A Prophylactic Approach to Teaching UML in Undergraduate Computer

Science Courses," The International Journal of Learning, Vol. 15, No. 3, 2008, pp. 47-62.

7

Francois, G., S. Pattanaik, K. Bouatouch and G. Breton, “Subsurface Texture Mapping," IEEE Computer Graphics and Applications, Vol. 28, No. 1, 2008, pp. 34-42.

Gallagher, D.R., D.C. Malocha, D. Puccio and N. Saldanha, “Orthogonal Frequency Coded Filters for

Use in Ultra-Wideband Communication Systems,” Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions, Vol. 55, No. 3, 2008, pp. 696-703.

Ge, Z., M. Jiao, R. Lu, T.X. Wu, S.T. Wu, W.Y. Li and C.K. Wie, “Wide-View and Broadband Circular Polarizers for Transflective Liquid Crystal Displays,” IEEE/OSA Journal of Display Technology, Vol. 4,

2008, pp. 129-138.

Ge, Z., R. Lu, T.X. Wu, S.T. Wu, C.L. Lin, N.C. Hsu, W.Y. Li and C.K. Wie, “Extraordinarily Wide-

View Circular Polarizers for Liquid Crystal Displays,” Optics Express, Vol. 16, 2008, pp. 3120-3129.

Ge, Z., T.X. Wu and S.T. Wu, “Single Cell Gap and Wide-View Transflective LCD Using Fringe Field Switching and Embedded Wire Grid Polarizer,” Applied Physics Letters, Vol. 92, 2008, pp. 051109-1-3.

Gonzalez, A.J. and Brezillon, P., “Integrating Two Context-based Formalisms for Improved Representation of Human Tactical Behavior,” Knowledge Engineering Review, Vol. 23, No. 3, 2008, pp.

295-315.

Gonzalez, A.J., B.S. Stensrud and G. Barrett, “Formalizing Context-Based Reasoning - A Modeling

Paradigm for Representing Tactical Human Behavior,” International Journal of Intelligent Systems, Vol.

23, No. 7, 2008, pp. 822-847.

Griffin, R., A. Vijayakumar, R.H. Chen, K.B. Sundaram, and L.C. Chow, “Development of a

Transparent Heater to Measure Surface Temperature Fluctuations under Spray Cooling Conditions,”

Journal of Heat Transfer, Vol. 30, 2008 pp. 1-4.

Gupta, A., A.R. Weeks and S. Richie, “Simulation of Elevated T-waves of an ECG in a Static Magnetic

Field,” IEEE Transactions on Biomedical Engineering, Vol. 55, No. 7, 2008, pp. 1890-1896.

Hamza-Lup, G., K.A. Hua, M. Le and R. Peng, “Dynamic Plan Generation and Real-Time Management

Techniques for Traffic Evacuation,” IEEE Transactions on Intelligent Transportation Systems, Vol. 9,

No. 4, 2008, pp. 615-624.

Han, B., B. Dost, V. Bafna and S. Zhang, “Structural Alignment of Pseudoknotted RNA,” Journal of

Computational Biology, Vol. 15, No. 5, 2008, pp. 489-504.

Ho, Y.H., A.H. Ho and K.A. Hua, “Routing Protocols for Inter-Vehicular Networks: A Comparative

Study in High-Mobility and Large Obstacles Environments,” Computer Communications Journal, Vol.

31, No. 12, 2008, pp. 2767-2780.

Janzing, D., P. Wocjan and S. Zhang, “A Single-Shot Measurement of the Energy of Product States in a

Translation Invariant Spin Chain Can Replace Any Quantum Computation,” New Journal of Physics, Vol. 10, No. 9, 2008, pp. 1-18.

Javed, O., K. Shafique, Z. Rasheed and M. Shah, “Modeling Intercamera Spacetime and Appearance Relationships for Tracking Across Non-overlapping Views," Computer Vision and Image

Understanding, Vol. 109, No. 2, 2008, pp. 146-162.

8

Jin, S., G. Schiavone and D. Turgut, “A Performance Study of Heuristics For Multiprocessor Task

Scheduling,” Journal of Supercomputing, Vol. 43, No.1, 2008, pp.77-97.

Johnson, C. and A.J. Gonzalez, “Automated After Action Review: State-of- the-Art Review and Trends,”

Journal of Diagnostic Medical Sonography, Vol. 5. No. 2, 2008, pp. 1-14.

Junejo, I. and H. Foroosh, “Euclidean Path Modeling For Video Surveillance,” Image and Vision

Computing (IVC), Volume 26, No. 4, 2008, pp. 512-528.

Khan, K.R. and T.X. Wu, “Finite Element Modeling of Dual-Core Photonic Crystal Fiber,” Journal of

Applied Computational Electromagnetics, Vol. 23, No. 3, 2008, pp. 215-219.

Khan, K.R. and T.X. Wu, “Short Pulse Propagation in Wavelength Selective Index Guided Photonic

Crystal Fiber Coupler,” IEEE Journal of Selected Topics in Quantum Electronics, Vol. 14, 2008, pp.

752-757.

Khan, K.R., T.X. Wu, D.N. Christodoulides and G.I. Stegeman, “Soliton Switching and Multi-Frequency

Generation in an Ideal Nonlinear Photonic Crystal Fiber Coupler,” Optics Express, Vol. 16, 2008, pp.

9417-9428.

LaViola, J., “Bringing VR and Spatial 3D Interaction to the Masses through Video Games,” IEEE

Computer Graphics and Applications, Vol. 28, No. 5, September/October 2008, pp. 10-15.

Leavens, G.T., “Use Concurrent Programming Models to Motivate Teaching of Programming

Languages,” ACM SIGPLAN Notices, Vol. 43, No. 11, 2008. Pp. 93-98.

Leon-Barth, C. and R.F. DeMara, “Network Communication Effects Simulator Evaluation Scenarios for

JTRS and WIN-T,” MSIAC Modeling and Simulation Journal, Vol. 2, No. 10, 2008, pp. 11-20.

Liu, D., K.A. Hua and K. Sugaya, “A Generic Framework for Internet-based Interactive Applications of High-Resolution 3D Medical Image Data,” IEEE Transactions on Information Technologies in

Biomedicine, Vol. 12, No. 5, 2008, pp. 618-626.

Lu, J., H. Jia, A. Arias, X. Gong and Z.J. Shen, “On-Chip Bondwire Magnetics with Ferrite-Epoxy Glob Coating for Power Systems on Chip,” International Journal of Power Management Electronics, Vol. 2008,

2008, pp. 1-9.

Mao, H., O. Rahman and I. Batarseh, “Zero-Voltage-Switching DC–DC Converters With Synchronous

Rectifiers,” IEEE Transactions on Power Electronics, Vol. 23, No. 1, 2008, pp. 369-387.

Mikhael, W.B. and R. Ranganathan, “Complex Adaptive FIR Digital Filtering Algorithm with Time-

Varying Independent Convergence Factors,” Signal Processing, Volume 88, No. 7, 2008, pp. 1889-1893.

Nagaj, D. and P. Wocjan, “Hamiltonian Quantum Cellular Automata in 1D,” Physical Review A, Vol. 78, No. 3, 2008, pp. 032311-14.

Nanda, S. and N. Deo, “ The Derivation and Use of a Scalable Model for Network Attack Identification

and Path Prediction,” Journal of Networks, Vol. 3, No. 4, 2008, pp. 64-71.

Nie, X., H. Xianyu, T. X. Wu and S. T. Wu, “Second and Fourth Harmonic Frequencies in Electric

Field-Induced Liquid Crystal Reorientations,” Molecular Crystals and Liquid Crystals, Vol. 489, 2008, pp. 194-203.

9

Obert, J., J. Krivanek, F. Pellacini, D. Sykora and S. Pattanaik, “iCheat: A Representation for Artistic Control of Indirect Cinematic Lighting,” Computer Graphics Forum, Vol. 27, No. 4, 2008, pp. 1217-1223.

Qahouq, J.A., H. Mao, H. Zhou and I. Batarseh, “DC-DC Converter with Interleaved Current Doublers

and Parallel Connected Transformers-Scheme,” Power Electronics, Vol. 1, No. 1, 2008, pp. 27-37.

Peterson, J.M. and M.A. Simaan, “Probabilities of Pure Nash Equilibria in Matrix Games When the

Payoff Entries of One Player are Randomly Selected,” Journal of Optimization Theory and Applications, Vol. 137, No. 2, 2008, pp. 401-410.

Pittner, J. and M.A. Simaan, “Control of a Continuous Tandem Cold Rolling Process,” Control of Engineering Practice, Vol. 16, No. 11, 2008, pp. 1379-1390.

Pittner, J. and M.A. Simaan, “Optimal Control of Tandem Cold Rolling Using a Pointwise Linear

Quadratic Technique with Trims,” ASME Journal of Dynamic Systems, Measurements and Control, Vol. 130, No. 2, 2008, pp. 021006-1- 021006-11.

Ranganathan, R. and W.B. Mikhael, “A Comparative Study of Complex Gradient and Fixed-Point ICA algorithms for Interference Suppression in Static and Dynamic Channels,” Signal Processing, Vol. 88, No.

2, 2008, pp. 399-406.

Rao, V.M., A. Behal, A.K. Jain and K.K. Reddy, “Experimental Comparison of Digital Control

Techniques for Single Phase Power Factor Correction,” IEEE Transactions on Industrial Electronics,

Vol. 67, No. 1, 2008, pp. 67-78.

Rao, V.M., A.K. Jain, K.K. Reddy and A. Behal, “Nonlinear Control of a Single Phase Unity Power

Factor Rectifier: Design, Analysis, and Experimental Results,” IEEE Transactions on Control Systems

Technology, Vol. 16, No. 6, 2008, pp. 1301-1307.

Sahin, I. and M. A. Simaan, “Competitive Flow Control in General Multi-Node Multi-Link

Communication Networks,” International Journal of Communication Systems, Vol. 21, No. 2, 2008, pp.

167-184.

Satya, R.V. and A. Mukherjee, “The Undirected Incomplete Perfect Phylogeny Problem,” IEEE/ACM

Transactions on Computational Biology and Bioinformatics, Vol. 5, No. 4, 2008, pp.618-629.

Secretan, J., N. Beato, D.B. D’Ambrosio, A. Rodriguez, A. Campbell and K. Stanley, “Picbreeder:

Collaborative Interactive Evolution of Images,” Leonardo Transactions, Vol. 41, No. 1, 2008, pp. 98-99.

Sengupta, S. and M. Chatterjee, “Designing Auction Mechanisms for Dynamic Spectrum Access,”

ACM/Springer Mobile Networks and Applications (MONET), Special issue on Cognitive Radio Oriented

Wireless Networks and Communications, Vol. 13, 2008, pp. 498-515.

Sengupta, W., M. Chatterjee and S. Ganguly, “Improving Quality of VoIP Streams over WiMax,” IEEE

Transactions on Computers, Vol. 57, 2008, pp. 145-156.

Sheikh, Y. and M. Shah, “Trajectory Association Across Multiple Airborne Cameras,” IEEE

Transactions on Pattern Analysis and Machine Intelligence, Vol. 30, No. 2, 2008, pp. 361-367.

10

Stensrud, B.S. and A.J. Gonzalez, “Discovery of High-Level Behavior from Observation of Human

Performance in a Strategic Game,” IEEE Transactions on Systems, Man and Cybernetics- Part B, Vol. 38, No. 3, 2008, pp. 855-874.

Sukthankar, G., M. Mandel and K. Sycara, “Creating Physically Embodied Agents Using Realistic Human

Motion,” Simulation and Gaming Journal, Vol. 39, No. 1, 2008, pp. 64-82.

Szeliski, R., R. Zabih, D. Scharstein, O. Veksler, V. Kolmogorov, A. Agarwala, M. Tappen and C. Rother,

“A Comparative Study of Energy Minimization Methods for Markov Random Fields with Smoothness-

Based Priors,” IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. 30, No. 6, 2008, pp.

1068-1080.

Tan, H. and R.F. DeMara. “A Multi-layer FPGA Framework Supporting Autonomous Partial Runtime

Reconfiguration,” IEEE Transactions on VLSI Systems, Vol. 16, No. 5, 2008, pp. 504-516.

Tener, G. and N. Deo, “Attacks on Hard Instances of Graph Isomorphism,” Journal of Combinatorial

Mathematics and Combinatorial Computing, Vol. 64, 2008, pp. 203-226.

Thakore, V., A. Behal, P. Molnar, D.C. Leistritz and J.J. Hickman, “Nanoscale Nonlinear Dynamic

Characterization of the Neuron-Electrode Junction,” Journal of Computational and Theoretical

Nanoscience, Vol. 5, No. 11, 2008, pp. 2164-2169.

Tokay, A., P. Bashor, E. Habib and T. Kasparis, “Raindrop Size Distribution Measurements in Tropical

Cyclones,” Monthly Weather Review, Vol. 136, 2008, pp.1669-1685.

Varman, P. and J. Wang, “Overview of SPEED08,” ACM Operating Systems Review, Vol. 42, No. 6,

2008, pp. 1-2.

Vasudevan, M. and N. Deo, “Efficient Intrusion-Detection using Programmable Agents based on Attack

Graph Patterns,” Congressus Numerantium, Vol. 192, 2008, pp. 193-200.

Vijayakumar, A., R. Todi, A. Warren and K. B. Sundaram, “Influence of N2/Ar Gas Mixture Ratio and Annealing on Optical Properties of Sicbn Thin Films Prepared by RF Sputtering,” Diamond Related

Materials, Vol. 17, No. 6, 2008, pp. 944-948.

Vu, K., H. Cheng and K. Hua, “Image Retrieval in Multipoint Queries,” International Journal of

Imaging Systems and Technology, Vol. 18, No. 2/3, 2008, pp. 170-181.

Vu, K., K. A. Hua, H. Cheng and S. D. Lang, “Bounded Approximation: A New Criterion for Dimensionality-Reduction Approximation in Similarity Search,” IEEE Transactions on Knowledge and

Data Engineering, Vol. 20, No. 6, 2008, pp. 768-783.

Wang, G. and D. Turgut. “Time-parallel Simulation of Wireless Ad-hoc Networks with Compressed

History,” Journal of Parallel and Distributed Computing, Vol. 69, No. 2, 2008, pp. 168-179.

Wang, G., D. Turgut, L. Bölöni, Y. Ji and D.C. Marinescu, “A MAC Layer Protocol for Wireless

Networks with Asymmetric Links,” Ad Hoc Networks, Vol. 6, No. 3, 2008, pp. 424-440.

Wang, G., D. Turgut, L. Bölöni, Y. Ji and D. Marinescu, “Improving Routing Performance Through M-Limited Forwarding in Power-Constrained Wireless Networks,” Journal of Parallel and Distributed

Computing, Vol. 68, 2008, pp. 501-514.

11

Wang, J., X. Yao and H. Zhu, “Exploiting In-Memory and On-Disk Redundancy to Conserve Energy in

Parity Disk Array,” IEEE transactions on Computers, Vol. 57, No. 6, 2008, pp. 733-747.

Wang, J., H. Zhu and D. Li, “eRAID: Conserving Energy in Conventional Disk based RAID Systems,”

IEEE Transactions on Computers, Vol. 57, No. 3, 2008, pp. 359-374.

Wang, W., S. Sengupta and M. Chatterjee, “Scheduling for End-to-End Performance in Multi-rate

CDMA/HDR Systems,” Journal on Physical Communications, Vol. 1, No. 4, 2008, pp. 277-287.

Wang, X., T. Feng and I. Batarseh, “High Efficiency Parallel Post Regulator for Wide Range Input DC–DC Converter,” IEEE Transactions on Power Electronics, Vol. 23, No. 5, 2008, pp. 852-858.

Warren, A.P., R.M. Todi, B. Yao, K. Barmak, K.B. Sundaram and K. R. Coffey, “On the Phase Identification of DC Magnetron Sputtered Pt-Ru Alloy Thin Films,” Journal of Vacuum Science and

Technology A, Vol. 26, No. 5, 2008, pp. 1208-1212.

Wocjan, P. and A. Abeyesinghe, “Speed-up by Quantum Sampling,” Physical Review A, Vol. 78, No. 4, 2008, pp. 042336-8.

Wocjan, P., D. Janzing, T. Decker and T. Beth, “Measuring 4-local n-Qubit Observables Could Probabilistically Solve PSPACE,” Quantum Information and Computation, Vol. 8, No. 8/9, 2008, pp.

741–755.

Wocjan, P. and J. Yard, “The Jones Polynomial: Quantum Algorithms and Application in Quantum

Complexity Theory,” Quantum Information & Computation, Vol. 8, No. 1/2, 2008, pp. 147–180.

Xiao, S., W. Qiu, G. Miller, T. X. Wu and I. Batarseh, “Adaptive Modulation Control for Multi-Phase Voltage Regulators,” IEEE Transactions on Power Electronics, Vol. 23, 2008, pp. 495-499.

Xie, F., K. A. Hua and N. Jiang, “A Cross-Layer Framework for Video-on-Demand Service in Multi-Hop WiMax Mesh Networks,” Computer Communications Journal, Vol. 31, No. 8, 2008, pp. 1615-

1626.

Xie, J., P.A. Heng and M. Shah, “A Shape Matching Approach using Skeletal Features and Context

Descriptor,” Pattern Recognition, Vol. 41, No. 5, 2008, pp. 1756-1767.

Xie, J., P.A. Heng and M Shah, “Image Diffusion using Saliency Bilateral Filter,” IEEE Transactions on Information Technology in Biomedicine, Vol. 12, No. 6, 2008, pp. 768-771.

Xiong, Y., X. Cheng, Z. J. Shen, C. Mi, H. Wu and V. Garg, “ A Prognostic and Warning System for Power Electronic Modules in Electric, Hybrid, and Fuel Cell Vehicles,” IEEE Transactions on Industrial

Electronics, Vol. 55, No. 6, 2008, pp. 2268-2276.

Xiong, Y., X. Cheng, X. Wang, P. Kumar, L. Guo and Z.J. Shen, “Performance Analysis of Trench Power MOSFETs in High Frequency Synchronous Buck Converter Applications,” International Journal of Power

Management Electronics, Vol. 2008, 2008, pp. 1-9.

Yan, P., X. Zhou, M. Shah and S.T.C. Wong, “Automatic Segmentation of High Throughput RNAi

Fluorescent Cellular Images,” IEEE Transactions on Information Technology in Biomedicine, Vol. 12,

No. 1, 2008, pp. 109-117.

12

Yu, Y-C., M.A. Simaan, S. Mushi, and N.V. Zorn, “Performance Prediction Of A Percutaneous

Ventricular Assist System Using Nonlinear Circuit Analysis Techniques,” IEEE Transactions on Biomedical Engineering, Vol. 55, No. 2, 2008, pp. 419-429

Yildirim, H., M.S. Krishnamoorthy and N. Deo, “A Study of the Sudoku Graph Family,” Congressus

Numernatium, Vol. 192, 2008, pp. 85-95.

Yilmaz, A. and M. Shah, “A Differential Geometric Approach to Representing the Human Actions,”

Computer Vision and Image Understanding Journal, Vol. 109, No. 3, 2008, pp. 335-351.

Zeleznik, R., T. Miller, A. van Dam, C. Li, D. Tenneson, C. Maloney and J. LaViola, “Applications and

Issues in Pen-Centric Computing,” IEEE Multimedia, Vol. 15, No. 4, 2008, pp. 14-21.

Zhong, M., M. Georgiopoulos and G.C. Anagnostopoulos, “A K-Norm Pruning Algorithm for Decision

Tree Classifiers Based on Error Rate Estimation,” Machine Learning, Vol. 71, No. 1, 2008, pp. 55-88.

Zhu, Y., J. Hong, J. Wang and X. Feng, “HBA: Distributed Metadata Management for Large Cluster-

based Storage Systems,” IEEE Transactions on Parallel and Distributed Systems, Vol. 57, No. 3, 2008,

pp. 359-374.

Engineering Technology (ENT)

Ali, T. and A. Mehrabian, “Towards Dynamic Land-Use Planning Using Geospatial Technology:

Conceptual Design of a Collaborative Web-based GIS,” The Technology Interface Journal, Vol. 8, No. 3, 2008.

Divo, E. and A. Kassab, “Localized Meshless Modeling of Natural Convective Viscous Flows,” Numerical Heat Transfer, Part A: Fundamentals, Vol. 53, No. 6, 2008, pp. 487-509.

Ducharme, A. and N. Gallagher, “Distance Education Technology: New Model For Lecture Recording

And Distribution,” Journal of Internet Technology, Vol. 9, No. 1, 2008, pp. 1-6.

Ducharme, A. and S. Temple, “Improved Aperture For Modulation Transfer Function Measurement Of

Detector Arrays Beyond The Nyquist Frequency,” Optical Engineering, Vol. 47, No. 9, 2008, pp. 1-9.

Erhart, K., E. Divo and A. Kassab, "An Evolutionary-Based Inverse Approach for the Identification of

Non-Linear Heat Generation Rates in Living Tissues using a Localized Meshless Method," International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 18, No. 3/4, 2008, pp. 401-414.

Gamez, B., D. Ojeda, E. Divo, A. Kassab and M. Cerrolaza, “Parallelized Iterative Domain

Decomposition Boundary Element Method for Thermoelasticity in Piecewise Non-Homogeneous Media,” Engineering Analysis with Boundary Elements, Vol. 32, 2008, pp. 1061-1073.

Haldar, A. and A. Mehrabian, “Structural Engineering in the New Millennium: Opportunities and Challenges,” Structural Survey, Vol. 26, No. 4, 2008, pp. 279-301.

Liu, Q., A. Sleiti and J. Kapat, “Application of Pressure and Temperature Sensitive Paints for Study of

Local Heat Transfer to a Circular Impingement Air Jet,” International Journal of Thermal Sciences, Vol. 47, 2008, pp. 749-757.

13

Mehrabian, A., “The State of the Art Analysis and Design of Structures: Application of RISA-3D,” The

Technology Interface Journal, Vol. 8, No. 2, 2008, pp.1-5.

Ojeda, D., E. Divo, A. Kassab and M. Cerrolaza, “Localización de Defectos en Hueso Cortical

Empleando el Método de los Elementos de Contorno y Algoritmos Genéticos,” Revista Boletín Técnico

del IMME, Vol. 46, No. 1, 2008, pp. 23-34.

Ojeda, D., E. Divo, A. Kassab and M. Cerrolaza, “Cavity Detection in Biomechanics by an Inverse

Evolutionary Point Load BEM Technique,” Inverse Problems in Science and Engineering, Vol. 16, No. 8, 2008, pp. 981-993.

Pollitt, M., K. Nance, B. Hay, R. Dodge, P. Craiger, P. Burke, C. Marberry and B. Brubaker, “Virtualization and Digital Forensics: A Research and Education Agenda,” Journal of Digital Forensic

Practice, Vol. 2, pp. 62-73.

Sleiti, A.K., “ Effect of Vent Aspect Ratio on Unsteady Laminar Buoyant Flow Through Rectangular Vents in Large Enclosures,” International Journal of Heat and Mass Transfer, Vol. 51, 2008, pp. 4850-

4861.

Sleiti, A.K. and J. Kapat, “Effect of Coriolis and Centrifugal Forces on Turbulence and Transport at

High Rotation and Density Ratios in Rib-Roughened Channel,” International Journal of Thermal

Sciences, Vol. 47, 2008, pp. 609-619.

Industrial Engineering and Management Systems (IEMS)

Abbasi, B., L. Rabelo and M. Hosseinkouchack, “Estimating Parameters of the Three-Parameter Weibull

Distribution Using Neural Network,” European Journal of Industrial Engineering, Vol. 2, No. 4, 2008, pp. 428-445.

Bedny,G., W. Karwowski and T. Sengupta, “Application of Systemic-Structural Theory of Activity in

the Development of Predictive Models of User Performance, ” International Journal of Human-Computer Interaction, Vol. 24, No. 3, 2008, pp. 239-274.

Cho, Y., J. Moore, R. Hill and C. Reilly, “Exploiting Empirical Knowledge for Bi-Dimensional Knapsack Problem Heuristics,” International Journal of Industrial and Systems Engineering, Vol. 3, No.

5, 2008, pp. 530-548.

Cornett, J., P. McCauley-Bush and N. Cummings, “An 8-Factor Model for Evaluating Crew Race

Performance,” International Journal of Sports Science and Engineering, Vol. 2, No. 3, 2008, pp. 169-

184.

Eskandari, H. and C.D. Geiger, “A Fast Pareto Genetic Algorithm Approach for Solving Expensive

Multiobjective Optimization Problems,” Journal of Heuristics, Vol. 14, No. 3, 2008, pp. 203-241.

Fayez, M., A. Kaylani, D. Cope, N. Rychlik and M. Mollaghasemi, “Managing Airport Operations Using

Simulation,” Journal of Simulation, Vol. 2, 2008, pp. 41-52.

Geiger, C.D. and R. Uzsoy, “Learning Effective Dispatching Rules for Batch Processor Scheduling,” International Journal of Production Research, Vol. 46, No. 6, 2008, pp. 1431-1454.

14

Jeffery, M., R. Butler and L. Malone, “Determining a Cost-Effective Customer Service Level: An

Empirical Study in the Semiconductor Industry, ”Supply Chain Management: An International Journal, Vol. 13, No. 3, 2008, pp. 225-232.

Kaylani, A., M. Mollaghasemi, D. Cope, S. Fayez, G. Rabadi and M. Steele, “A Generic Environment

for Modeling Future Launch Operations-GEM-FLO: A Success Story in Generic Modeling,” Journal of the Operational Research Society, Vol. 59, 2008, pp. 1312–1320.

Kramarenko, S., E. Shevtshenko, T. Karaulova and Y. Wang, “Decision Analysis in Project Management Process,” Journal of Machine Engineering, Vol. 8, No. 1, 2008, pp. 104-113.

Landaeta, R. and T. Kotnour, “Formal Mentoring: A Human Resource Management Practice that Supports Knowledge Transfer across Projects,” The International Journal of Learning and Intellectual

Capital, Vol. 5, No.3/4, 2008, pp.455-475.

Maudgalya, T., A. Genaidy, G. Weckamn, R. Shell, W. Karwowski and S. Wallace, “A Critical Appraisal of Epidemiological Studies Investigating the Effects of Ultrafine Particles on Human Health,”

Human Factors and Ergonomics in Manufacturing, Vol. 18, No. 3, 2008, pp. 358-373.

McWilliams, D.L., P.M. Stanfield and C.D. Geiger, “Minimizing the Completion Time of the Transfer

Operations in a Central Parcel Consolidation Terminal with Unequal-Batch-Size Inbound Trailers,”

Computers and Industrial Engineering, Vol. 54, No. 4, 2008, pp. 709-720.

Nazzal, D. and L.F. McGinnis, “Throughput Performance Analysis for Closed-loop Vehicle-based

Material Handling Systems,” IIE Transactions, Vol. 40, No. 11, 2008, pp. 1097-1106.

Proctor, M., G. Cardona and C. Hollander, “Using Simulation to Investigate a Non-Anthropomorphic

Framework for Communications within a Human-Agent War-Fighting Team,” The Journal of Defense

Modeling and Simulation: Applications, Methodology, Technology, Vol. 5, No. 2, 2008, pp. 1-17.

Rabelo, L., M. Helal and R. Moraga, “Using System Dynamics, Neural Nets, and Eigenvalues to

Analyse Supply Chain Behaviour – A Case Study,” International Journal of Production Research, Vol.

46, No. 1, 2008, pp. 51-72.

Rami, N. and M. Proctor, “Real Time Physically-Based Modeling and Simulation of Cratering and

Fragmentation of Terrain,” Simulation, Vol. 83, No. 12, 2008, pp. 830-841.

Searcy, C., R. Landaeta, A. Adcock, J. Marken, D. Dickerson and T. Kotnour, “Student Perception of

Cooperative Learning in a Blended Engineering Course,” World Review of Science, Technology and Sustainable Development, Vol. 5, No.3/4, 2008, pp.373-388.

Sequeira, R., A. Genaidy, G. Weckamn, R. Shell, W. Karwowski and A. Acosta-Leon, “Health Effects of

Nanomaterials: A Critical Appraisal Approach and Research to Practice,” Human Factors and Ergonomics in Manufacturing, Vol. 18, No. 3, 2008, pp. 293-341.

Tuncel, S., A. Genaidy, R. Shell, W. Karwowski, M. Darwish, F. Noel and D. Singh, “Research to Practice: Effectiveness of Controlled Workplace Interventions to Reduce Musculoskeletal Disorders in

the Manufacturing Environment- Critical Appraisal and Meta-Analysis,” Human Factors and

Ergonomics in Manufacturing, Vol. 18, No. 2, 2008, pp. 93-124.

15

Viruet, H.B., A. Genaidy, R. Shell and W. Karwowski, “Effect of Forklift Operation on Lower Back

Pain: An Evidence-Based Approach,” Human Factors and Ergonomics in Manufacturing, Vol. 18, No. 2, 2008, pp. 125-151.

Wang, Y., “Closed-Loop Analysis in Semantic Tolerance Modeling,” ASME Transactions Journal of

Mechanical Design, Vol. 130, No. 6, 2008, pp. 1-10.

Wang, Y., “Degree Elevation and Reduction of Periodic Surfaces,” Computer-Aided Design &

Applications, Vol. 5, No. 6, 2008, pp. 841-854.

Wang, Y., “Interpretable Interval Constraint Solvers in Semantic Tolerance Analysis,” Computer-Aided

Design & Applications, Vol. 5, No. 5, 2008, pp. 654-666.

Wang, Y., “Semantic Tolerance Modeling with Generalized Intervals,” ASME Transactions Journal of

Mechanical Design, Vol. 130, No. 8, 2008, pp. 1-7.

Mechanical, Materials and Aerospace Engineering (MMAE)

Al-Aqeeli, N., G. Mendoza-Suarez, C. Suryanarayana and R.A.L. Drew, “Development of New Al-based

Nanocomposites by Mechanical Alloying,” Material Science & Engineering - A, Vol. 480, 2008, pp.

392-396.

Allen, R. and C. Xu, “Cooperative Navigation and Adaptive Guidance,” The Bulletin of Military

Operations Research: Phalanx, Vol. 41, No. 4, pp. 12-17.

Babu, S., A. Karakoti and S. Seal, “A Cost Effective Nanostructure Rare Earth Catalytic Coating to

Prevent Environmental Degradation,” Steel Technology, Vol. 2, No. 4, 2008, pp. 26-29.

Babu, S., A. Shulte and S. Seal, “Defects and Symmetry Influence on Visible Emission of Eu-doped

Nanoceria,” Applied Physics Letters, Vol. 92, No. 12, 2008, pp. 123112-4.

Baer, D.R., J.E. Amonette, M.H. Engelhard, D.J. Gaspar, A.S.Karakoti, S. Kuchibhatla, P. Nachimuthu,

J.T. Nurmi, V. Sarathy, S. Seal, P. G. Tratnyek and C.M. Wang, “Characterization Challenges for

Nanomaterials,” Surface and Interface Analysis Vol. 40, 2008, pp. 529-537.

Baksi, S.R., V. Singh, K. Balani, D. G. McCartney, S. Seal and A. Agarwal, “C Nanotube Reinforced

Aluminum Composite Coating via Cold Spraying,” Surface Coatings and Technology, Vol. 202, 2008, pp. 5162-5169.

Baksi, S.R., V. Singh, K. Balani, D. G. McCartney, S. Seal and A. Agarwal, “Deformation and Damage

Mechanism of Multiwalled CNT Under High Velocity Impact,” Scripta Materilia, Vol. 59, 2008, pp. 499-502.

Balani, K., T. Zhang, A. Karakoti, W. Li, S. Seal and A. Agarwal, ”In situ Carbon Nanotube Reinforcements in Plasma Sprayed Aluminum Oxide Coatings,” Acta Materilia, Vol. 56, No. 3, 2008,

pp. 571-579.

Basu, S. and B.M. Cetegen, “Modeling of Liquid Ceramic Precursor Droplets in a High Velocity Oxy-Fuel Flame Jet,” Acta Materialia, Vol 56, pp. 2750-2759.

16

Bera, D., S. Kuchibatla, S. Azad, L. Saraf, C. M. Wang, V. Sutthanandan, D.E. McCready, M.H.

Engelhard, O.A. Marina, D.R. Baer, S. Seal and S. Thevatsun, “Growth and Characterization of Highly Oriented Gd-foped CeO2 (111) Thin Films on ZrO2 (111)/Al2O3 (0001) Substrates,” Thin Solid Films,

Vol. 516, 2008, pp. 6088-6094.

Bowie, J., F.A. Moslehy and A. Oloufa, “Development of a Low-Cost Weigh-in-Motion System,” Journal of Management & Engineering Integration, Vol. 1, No. 1, 2008, pp.34-41.

Chai, G., Y. Sun, J. Sun and Q. Chen, “Mechanical Properties of Carbon Nanotube – Copper Nanocomposites,” Journal of Micromechics and Microengineering, Vol. 18, No. 3, 2008, pp. 1-4.

Chen, J., S. Patil, S. Seal and J.F. McGinnis, “Nanoceria Particles Prevent ROI-induced Blindness,” Advances in Experiental Medicine and Biology, Vol. 613, 2008, pp. 53-59.

Chen, K., X. Zhang, H. Wang, L. Zhang, F. Yang, J. Zhu and L. An, “Making Nanostructured Ceramics

from Micrometer-sized Powders via Grain Refinement During SPS Sintering,” Journal of the American Ceramic Society, Vol. 91, No. 8, 2008, pp. 2475-2480.

Chen, R.H., M. Chaos and G. Haddad, “Analysis of Dilute Aerosol Flow and Noise Generation in an Acoustic Transducer,” Journal of Aerosol Science, Vol. 39, 2008, pp. 441-449.

Chen, R.H., D.S. Tan, K.C. Lin, L.C. Chow, A.R. Griffin and D.P. Rini, “Droplet and Bubble Dynamics in Saturated FC-72 Spray Cooling on a Smooth Surface,” Journal of Heat Transfer, Vol. 130, No. 10,

2008, pp. 1-9.

Dahotre, N. and S. Seal, “Materials and Surfaces for Energetics - Commentary,” JOM, Vol. 60, No. 9, 2008, pp. 36.

Demirkaya, G., C. Wafo Soh, and O.J. Ilegbusi, “Direct Solution of Navier-Stokes Equations Using Radial Basis Functions,” Applied Mathematical Modeling, Vol. 9, 2008, pp. 1848-1858.

Divo, E. and A. Kassab, "Localized Meshless Modeling of Natural Convective Viscous Flows,”

Numerical Heat Transfer Part B: Fundamentals, Vol. 53, 2008, pp. 487–509.

Erhart, K., A. Kassab and E. Divo, "An Inverse Localized Meshless Technique for the Determination of

Non-Linear Heat Generation Rates in Living Tissues," International Journal of Heat and Fluid Flow, Vol. 18, No.3, 2008, pp. 401-414.

Gámez, B., D. Ojeda, E. Divo, A. Kassab and M. Cerrolaza, "Cavity Detection in Biomechanics by an Inverse Evolutionary Point Load BEM Technique," Inverse Problems in Science and Engineering, Vol.

16, No. 8, 2008, pp. 981–993.

Gamez, B., D. Ojeda, E. Divo, A. Kassab and M. Cerrolaza, "Parallelized Iterative Domain Decomposition Boundary Element Method for Thermoelasticity in Piecewise Non-Homogeneous

Media," Engineering Analysis, Vol. 32, 2008, pp. 1061-1073.

Gao, F., W. Yang, Y. Fan and L. An, “Aligned Ultra-long Single-Crystalline α-Si3N4 Nanowires,”

Nanotechnology, Vol. 19, 2008, pp. 1-4.

Gao, F., W. Yang, Y. Fan and L. An, “Mass Production of Very Thin Single Crystalline Silicon Nitride

Nanobelts,” Journal of Solid State Chemistry, Vol. 181, 2008, pp. 211-215.

17

Gao, F., W. Yang, H. Wang, Y. Fan and L. An, “Controlled Al-doped Singlecrystalline 6H-SiC

Nanowires,” Crystal Growth & Design, Vol. 8, No. 5, 2008, pp. 1461-1464.

Ghosh, D., G. Subhash and N. Orlovskaya, “Scratch-induced Residual Stress Measurements Within SiC

particles in a ZrB2 – SiC Composite Using Micro-Raman Spectroscopy,” Acta Materialia, Vol. 56,

2008, pp. 5345-5354.

Gong, J., J. Sun and Q. Chen, “Micromachined Sol-gel Carbon Nanotube/SnO2 Hydrogen Sensor,”

Sensors and Actuators B (Chemical), Vol. 130, 2008, pp. 829-835.

Gou, J., “Surface Coating of Carbon Nanofibers/Nanotubes by Electrodeposition for

Multifunctionalization," Nanotechnology, Vol. 19, No. 2, 2008, pp. 1-4.

Griffin, A.R., A. Vijayakumar, R.H. Chen, K.B. Sundaram and L.C. Chow, “Development of a

Transparent Heater to Measure Surface Temperature Fluctuations Under Spray Cooling Conditions,”

ASME Journal of Heat Transfer, Vol. 130, No. 11, 2008, pp. 1145011-1145014.

Gupta, A. and R. Kumar, “Lattice Boltzmann Simulation to Study Multiple Bubble Dynamics,”

International Journal of Heat Mass Transfer, Vol. 51, 2008, pp. 5192-5203.

Heckert, E., S. Seal and W. Self, “Fenton-like Reaction Catalyzed by the Rare Earth Inner Transition

Metal Cerium,” Environmental Science and Technology, Vol. 42, 2008, pp. 5014-5019.

Heckart, E., J. Spence, A. Karakoti, S. Seal and W. Self, ”The Role of Cerium Redox State in the

Catalytic Reaction of Superoxide with Nanoceria,” Biomaterials, Vol. 29, 2008, pp. 2705-2709.

Ju, G., K. Reifsnider and X. Huang, “Infrared Thermography and Thermoelectrical Study of a Solid

Oxide Fuel Cell,” Journal of Fuel Cell Science and Technology, Vol. 5, No. 3, 2008, pp. 1-6.

Karakoti, A., S. Kuchibatla, D. Baer, S. Thevutsan, D. C. Sayle and S. Seal, “Self Assembled

Nanostructures Using Ice Molds,” SMALL, Vol. 4, No. 8, 2008, pp. 1210-16.

Karakoti A., N.M. Reveire, R. Agarwal, R. Narayan, W. Self, J. McGinnis and S. Seal, “Overview-Nanoceria as Antioxidants – Synthesis and Biomedical Applications,” JOM, 2008, pp. 33-37.

Keller, S. and A.P. Gordon, “Stress Distribution in Helical Springs under Flexure,” Springs, Vol. 47, No. 4, pp. 68-71.

Klassen, T., C. Suryanarayana and R. Bormann, “Low Temperature Superplasticity in Ultrafine-Grained Ti5Si3-TiAl Composites,” Scripta Materialia, Vol. 59, 2008, pp. 455-458.

Knipe, K., C. Xu and M.J. Jackson, “Finite Element Modeling and Vibration Control of a Tetrahedral

Space Frame Applied to Micromachining,” International Journal of Nano and Biomaterials, Vol. 1, No. 4, pp. 448-458.

Kota, K.M., L.C. Chow, J. Du, J. Kapat, Q. Leland and R. Harris, “Design of a Dual Latent Heat Sink for Pulsed Electronic Systems,” AIAA Journal of Thermophysics and Heat Transfer, Vol. 22, No. 4,

2008, pp. 572-580.

Krishnan, V.B., R. Mahadevan Manjeri, B. Clausen, D.W. Brown and R. Vaidyanathan, “Analysis of

Neutron Diffraction Spectra Acquired in situ during Mechanical Loading of Shape Memory NiTiFe at

Low Temperatures,” Material Science and Engineering A, Vol. 481/482, 2008, pp. 3-11.

18

Lin, Y.H., H. Ren, Y.H. Wu, S.T. Wu, Y. Zhao and J.Y. Fang, “Electrically Tunable Wettability of Liquid Crystal/Polymer Composite Films,” Optics Express, Vol. 16, No. 22, 2008, pp. 17591.

Londe, G., A. Chunder, A. Wesser, L. Zhai, and H. J. Cho, “Microfluidic Valves Based On

Superhydrophobic Nanostructures and Switchable Thermosensitive Surface For Lab-on-a-chip (LOC) Systems,” Sensors and Actuators B, Vol. 132, 2008, pp. 431-438.

Lugovy, M., V. Slyunyayev, N. Orlovskaya, D. Verbylo,and M. Reece, “Room Temperature Creep of LaCoO3 Based Perovskites: Equilibrium Strain Under Compression,” Physics Review B, Vol. 78, No.

2, 2008, pp. 1-9.

Luo, J., S. Liu, Y. Fan, L. Wang, L. Zhang, P. Zhang and L. An, “Effect of Mechanical Milling on

Photoluminescence of γ-alumina Nanoparticles,” Journal of Nanoscience and Nanotechnology, Vol. 8,

No. 3, 2008, pp. 1414-16.

Luo, N., G.H. Miley, K.J. Kim, R. Burton and X. Huang, “NaBH4/H2O2 Fuel Cells for Air Independent

Power Systems,” Journal of Power Sources, Vol. 185, No. 2, 2008, pp. 685-690.

Milanova, D. and R. Kumar, “Heat Transfer Behavior of Silica Nanoparticles in Pool Boiling

Experiment,” Journal of Heat Transfer, Vol. 130, 2008, pp. 042401-2.

Mishra, A., N. Hasan, S. Sanghi and R. Kumar, “Two-Dimensional Buoyancy Driven Thermal Mixing in

a Horizontally Partitioned Adiabatic Enclosure,” Physics of Fluids, Vol. 20, No. 6, 2008, pp. 1-15.

Orlovskaya, N., M. Lugovy, J. Kuebler, S. Yarmolenko and J. Sankar, “Effect of Rolling and Hot Pressing on Mechanical Properties of Boron Carbide Based Ceramics,” Journal of Material Science, Vol.

43, No. 17, 2008, pp. 5942-5947.

Orlovskaya, N., M. Lugovy, S. Pathak, D. Steinmetz, J. Lloyd, L. Fegely, M. Radovic, E.A. Payzant, E.

Lara-Curzio, L. Allard and J. Kuebler, “Thermal and Mechanical Properties of LaCoO3 and

La0.8Ca0.2CoO3 Perovskites,” Journal of Power Sources, Vol. 182, 2008, pp. 230-239.

Ostrowski, Z., R. A. Bialecki and A. Kassab, "Solving Inverse Heat Conduction Problems Using Trained

POD-RBF Network Inverse Methods," Inverse Problems in Science and Engineering, Vol.16, No.1,

2008, pp. 39-54.

Pang, H., T.W. Lee, M. G. Moharam, P.L. Likamwa and H.J. Cho, “Integrated Optical SPR Sensor

Based on Mode Conversion Efficiency,” Electronics Letters, Vol. 44, No. 16, 2008, pp. 971-972.

Pang, H., P. Likamwa and H. J. Cho, “On-chip Surface Plasmon Resonance Sensor,” Journal of

Nanoscience and Nanotechnology, Vol. 8, No. 10, 2008, pp. 4968-4971.

Pathak, S., S. Kalidindi, C. Klemenz and N. Orlovskaya, “Analyzing Indentation Behavior of LaGaO3

Single Crystals Using Spherical Indentation Stress-Strain Curves,” Journal of the European Ceramic

Society, Vol. 8, No. 11, 2008, 2213-2220.

Pathak, S., S. Kalidindi, B. Moser, C. Klemenz and N. Orlovskaya, “Analyzing Indentation Behavior of

LaGaO3 Single Crystals Using Sharp Indenters,” Journal of the European Ceramic Society, Vol. 28, No. 10, 2008, pp. 2039-2047.

19

Radovic, M., S.A. Speakman, L.F. Allard, E.A. Payzant, E. Lara-Curzio, W. Kriven, L.J. Fegely and N.

Orlovskaya, “Thermal Properties and Structural Stability of LaCoO3 in Reducing and Oxidizing Environments,” Journal of Power Sources, Vol. 184, No. 1, 2008, pp. 77-83.

Rea, K., V. Vishwanathan, J. DeHosson, S. O’Dell, T. McKechnie, S. Rajagopalan, R. Vaidyanathan and

S. Seal, “Structure and Property Evaluation of a Vacuum Plasma Sprayed Nanostructured WHfC Bulk Composite,” Materials Science and Engineering A, Vol. 477, 2008, pp. 350-357.

Saha, A., S. Seal, B. Cetegen, E. Jordan, A. Ozturk and S. Basu, “Thermophysical Processes in Cerium Nitrate Precursor Droplets Injected into High Temperature Plasma,” Surface and Coatings Technology,

Vol. 203, No. 15, 2008, pp. 2081-2091.

Sarkar, S., A. Chunder, W. Fei, L. An and L. Zhai, “Superhydrophobic Mats of Polymer Derived

Ceramic Fibers,” Journal of the American Ceramic Society, Vol. 9, No. 8, 2008, pp. 2751-2755.

Savchyn, O., P.G. Kik, R.M. Todi, K.R. Coffey, H. Nukala and H. Heinrich, “Effect of Hydrogen Passivation on Luminescence-center-Mediated Er Excitation in Si Rich SiO2 With and Without Si

Nanocrystals,” Physical Review B, Vol. 77, No. 20, 2008, pp. 1-11.

Savchyn, O., R.M. Todi, K.R. Coffey and P.G. Kik, “Multilevel Sensitization of Er3+ in Low-

temperature-annealed Silicon-rich SiO2,” Applied Physics Letters, Vol. 93, No. 23, 2008, pp. 1-3.

Sayle, D., S. Seal, Z. Wang, B. Mangil, D. Price, A. Karakoti, S. Kuchibatla, Q. Hao, G. Moebus, X. Xu

and T.X.T. Sayle, “Mapping Nanostructure: A Systematic Enumeration of Nanomaterials by Assembling

Nanobuilding Blocks at Crystallographic Positions,” ACS NANO, Vol. 2, No. 6, 2008, pp. 1237-51.

Sharma, S. and C. Suryanarayana, “Effect of Carbon Addition on the Glass-Forming Ability of

Mechanically Alloyed Fe-based Alloys,” Journal of Applied Physics, Vol. 103, No. 1, 2008, pp. 1-5.

Sharma, S. and C. Suryanarayana, “Effect of Nb on the Glass-Forming Ability of Mechanically Alloyed

Fe-Ni-Zr-B Alloys,” Scripta Materialia, Vol. 58, 2008, pp. 508-511.

Shelton, D.J., T. Sun, J.C. Ginn, K.R. Coffey and G.D. Boreman, “Simulation of Electromechanical Responses of Ferroelectric Ceramics Driven by Alternating Compressive Stress and Static Electric

Field,” Journal of Applied Physics, Vol. 104, No.10, 2008, pp. 1-6.

Shukla, S., P. Zhang, H.J. Cho, L. Ludwig and S. Seal, “Significance of Electrode-Spacing in Hydrogen

Detection for Tin Oxide-based MEMS Sensor,” International Journal of Hydrogen Energy, Vol. 33,

2008, pp. 470-475.

Solasi, R., Y. Zou, X. Huang and K. Reifsnider, “A Time and Hydration-Dependent Viscoplastic Model

for Polyelectrolyte Membranes in Fuel Cells,” Mechanics of Time-Dependent Materials, Vol. 12, No. 1,

2008, pp. 15-30.

Sun, L., Y. Yu, G. Song and J. Gou, "Numerical Analysis of Acoustic Wave Propagation in Layered

Carbon Nanofiber Reinforced Polymer Composites," Journal of Applied Physics, Vol. 104, No. 4, 2008, pp. 043522-1-5.

Sun, T., B. Yao, A.P. Warren, S. Roberts, V. Kumar, K. Barmak and K. R. Coffey, “Classical Size Effect in Oxide-encapsulated Cu Thin Films: Impact of Grain Boundaries Versus Surfaces on

Resistivity,” Journal of Vacuum Science and Technology A, Vol. 26, No. 4, 2008, pp. 605-609.

20

Suryanarayana, C., “Recent Developments in Mechanical Alloying,” Reviews on Advanced Materials

Science, Vol. 18, 2008, pp. 203-211.

Suryanarayana, C., “Six Decades of Metallurgical Education and Research: A Magnificent Obsession,” A

Tribute to Professor T.R. Anantharaman, Transactions of the Indian Institute of Metals, Vol. 61, 2008,

pp. 63-72.

Suryanarayana, C., “Structure and Properties of Ultrafine-Grained MoSi2+Si3N4 Composites

Synthesized by Mechanical Alloying,” Material Science & Engineering-A, Vol. 479, 2008, pp. 23-30.

Suryanarayana, C. and S. Sharma, “Lattice Contraction during Amorphization by Mechanical Alloying,”

Journal of Applied Physics, Vol. 104, 2008, pp. 103503-8.

Suzuki, N., H. Nanda, D. J. Angiolillo, H. Bezerra, M. Sabate, P. Quevedo, F. Alfonso, C. Macaya, T.A.

Bass, O.J. Ilegbusi,and M.A. Costa, “Assessment of Potential Relationship Between Wall Shear Stress

and Arterial Wall Response After Bare Metal Stent and Sirolimus-eluting Stent Implantation in Patients with Diabetes Mellitus,” International Journal of Cardiovascular Imaging, Vol. 24, 2008, pp. 357-364.

Tafti, E.Y., R. Kumar and H.J. Cho, “Effect of Laminar Velocity Profile Variation on Mixing in Microfluidic Devices – the Sigma Micromixer,” Applied Physics Letter, Vol. 93, No. 14, 2008, pp.

143504-4.

Viswanathan, V., K. Rea, A. Vaidya and S. Seal, “Role of Spray Drying of Nanoagglomerates in

Morphology Evaluation in Nanostructured APS Coating,” Journal of the American Ceramic Society,

Vol. 91, No. 2, 2008, pp. 379-386.

Wang, H., Z. Xie, W. Yang, J.Y. Fang, and L.N. An, “Morphology Control in Vapor-Liquid- Solid

Growth of SiC Nanowires,” Crystal Growth & Design, Vol. 8, No. 11, 2008, pp. 3893-3896.

Wang, L., L. Zhang, Y. Fan, J. Luo, P. Zhang and L. An, “Effect of Nd-doping on the Optical Properties

of YAG Nanopowders,” Journal of Nanoscience and Nanotechnology, Vol. 8, No. 3, 2008, pp. 1454-

1457.

Wang, Y., L. Zhang, W. Xu, T. Jiang, Y. Fan, D. Jiang and L. An, “Effect of Thermal Initiator

Concentration on Electrical Behavior of Polymer-derived Amorphous SiCN Ceramics,” Journal of the

American Ceramic Society, Vol. 91, No. 12, 2008, pp. 3971-3975.

Warren, A.P., R.M. Todi, K. Barmak, K.B. Sundaram and K.R. Coffey, “On the Phase Identification of

DC Magnetron Sputtered Pt-Ru Alloy Thin Films,” Journal of Vacuum Science and Technology A, Vol. 26, No. 26, 2008, pp.1208-1212.

Wu, Z.Q., S.V.N.T. Kuchibatla, C.M. Wang, L.V. Saraf, M.H. Englehard, V. Shuttananadan, S.

Thevatsun and S. Seal, “Growth and Structure of Epitaxial Ce0.8Sm0.2O1.9 by Oxygen Plasma Assisted Molecular Beam Epitaxy,” Journal of Crystal Growth, Vol. 310, 2008, pp. 2450-2456.

Xing, H., L. Sun, G. Song, J. Gou and Y.W. Hao, "Surface Coating of Carbon Nanofibers/Nanotubes by Electrodeposition for Multifunctionalization," Nanotechnology, Vol. 19, No. 2, 2008, pp. 1-5.

Xu, C. and Y.C. Shin, “An Adaptive Fuzzy Controller for Constant Cutting Force in End-Milling Processes,” ASME Transactions, Journal of Manufacturing Science and Engineering, Vol. 130, pp.

031001-10.

21

Xu, C. and Y.C. Shin, “A Fuzzy Inverse Model Construction Method for General Monotonic Multi-Input

Single-Output Systems,” IEEE Transactions on Fuzzy Systems, Vol. 16, No. 5, pp. 1216-1231.

Xu, Y., “3D Range Maximization of a Suborbital Launch Vehicle’s Upper Stage,” The Journal of the

British Interplanetary Society, Vol. 61, No. 10, 2008, pp. 395-400.

Xu, Y., “Chattering Free Robust Control for Nonlinear Systems,” IEEE Transactions on Control Systems

Technology, Vol. 16, No. 6, 2008, pp. 1352-1359.

Xu, Y. and S. Suman, “Robust Control for Libration Point Station Keeping,” The Journal of Aerospace

Engineering, Vol. 21, No. 2, 2008, pp. 45-115.

Yang, W., F. Gao, H. Wang, Z. Xie and L. An, “Asymmetric Si3N4 Nanodendrites,” Crystal Growth &

Design, Vol. 8, No. 8, 2008, pp. 2606-2608.

Yang, W., F. Gao, H. Wang, Z. Xie and L. An, “Synthesis of Ceramic Nanocomposite Powders via In-situ Formation of Nanowires/nanobelts,” Journal of the American Ceramic Society, Vol. 9, No. 4, 2008,

pp. 1312-1315.

Yang, W., X. Cheng, H. Wang, Z. Xie, F. Xing and L. An, “Bundled Silicon Nitride Nanorings,” Crystal

Growth & Design, Vol. 8, No. 11, 2008, pp. 3921-3923.

Yang, W., H. Wang, X. Cheng, Z. Xie and L. An, “Perfect Single-crystal Al2O3 Microspheres,” Journal

of the American Ceramic Society, Vol. 9, No. 8, 2008, pp. 2732-2735.

Yang, W., H. Wang, S. Liu, Z. Xie and L. An, “Catalyst and Temperature Dependent Growth of Silicon Nitride Micro/nanoribbons,” Journal of Nanoscience & Nanotechnology, Vol. 8, No. 8, 2008, pp. 3926-

3929.

Yao, B. and K.R. Coffey, “A High-throughput Approach for Cross-sectional Transmission Electron

Microscopy Sample Preparation of Thin Films,” Journal of Electron Microscopy, Vol. 57, No. 6, 2008,

pp. 189-194.

Yao, B. and K.R. Coffey, “Back-etch Method for Plan View Transmission Electron Microscopy Sample

Preparation of Optically Opaque Films,” Journal of Electron Microscopy, Vol. 57, No. 2, 2008, pp. 47-

52.

Yao, B. and K.R. Coffey, "The Effective Interdiffusivity, Structure, and Magnetic Properties of

[Fe/Pt](n) Multilayer Films," Journal of Applied Physics, Vol. 103, No. 7, 2008, pp. 07E107-1-3.

Yao, B. and K.R. Coffey, “The Influence of Periodicity on the Structure and Properties of Annealed

[Fe/Pt]n Multilayer Films,” Journal of Magnetism and Magnetic Materials, Vol. 320, No. 3-4, 2008, pp.

559-564.

Yao, B., T. Sun, V. Kumar, K. Barmak and K.R. Coffey, “Grain Growth and Void Formation in

Dielectric-encapsulated Cu Thin Films,” Journal of Materials Research, Vol. 23, No. 7, 2008, pp. 2033-2039.

Yoon, W., X. Huang, P. Fazzino, K. Reifsnider and M. Akkaoui, “Evaluation of Coated Metallic Bipolar Plates for Polymer Electrolyte Membrane Fuel Cells,” Journal of Power Sources, Vol. 179, No. 1, 2008,

pp. 265-273.

22

Zhang, L., Y. Wang, Y. Wei, W. Xu, D. Fang, L. Zhai, K. Lin and L. An, “A Silicon Carbonitride

Ceramic with Anomalously High Piezoresistivity,” Journal of the American Ceramic Society, Vol. 91, No. 4, 2008, pp. 1346-1349.

Zhao, Y. and J.Y. Fang, “Zigzag Lipid Tubules,” Journal of Physical Chemistry B, Vol. 112, 2008, pp.

10964.

Zhao, Y., Z. Ge and J.Y. Fang, “Elastic Modulus of Viral Nanotubes,” Physical Review E, Vol. 78, No.

3, 2008, pp. 031914-031917.

Zhao, Y., K. Tamhane, X. Zhang, L. An and J.Y. Fang, “Heterogeneous elasticity of self-assembled

Lipid Tubules,” ACS Nano, Vol. 2, 2008, pp. 1466-1472.

Zhao, Y., K. Tamhane, X. Zhang, L. An and J.Y. Fang, “Radial Elasticity of Self-Assembled Lipid

Tubules,” ACS Nano, Vol. 2, 2008, pp. 1466.

23

Conference Papers

Civil, Environmental and Construction Engineering (CECE)

Abdel-Aty, M. and V. Gayah, "Comparison of Two Different Ramp Metering Algorithms For Real-time Crash Risk Reduction," 87

thAnnual Meeting of the Transportation Research Board, Washington, DC,

January 10-14, 2008.

Abdel-Aty, M. and V. Gayah, "Considering Route Diversion As A Real-time Crash Prevention Strategy

On Urban Freeways," 87th Annual Meeting of the Transportation Research Board, Washington, DC,

January 10-14, 2008.

Abdel-Aty, M. and A. Pande, "Proactive Traffic Management using ITS data from Uninterrupted Flow

Facilities," Transportation Planning and Implementation Methodologies for Developing Countries, IIT

Bombay, December 3-6, 2008.

Abdel-Aty, M. and A. Pande, "The Viability of Real-time Prediction and Prevention of Traffic

Accidents," The 4th

International Gulf Conference on Roads, Doha, Qatar, November 1-13, 2008.

Abdel-Aty, M., A. Pande, A. Das and W. Knibbe, "Exploration of Crash Prone Traffic Conditions on

Freeways in the Netherlands using Random Forests," 10th International Conference on Applications of

Advanced Technologies in Transportation, Athens, Greece, May 27-31, 2008.

Aviram, A., K. Mackie, and B. Stojadinovic, “Effect of Abutment Modeling on the Seismic Response of

Bridge Structures,” In Proceedings of the 6th National Seismic Conference on Bridges and Highways, Charleston, SC, July 27-30, 2008.

Aviram, A., K. Mackie, and B. Stojadinovic, “Epistemic Uncertainty of Seismic Response Estimates for Reinforced Concrete Bridges,” In Proceedings of the 14th World Conference on Earthquake

Engineering, Beijing, China, October 12-17, 2008.

Bacopoulos, P. and S.C. Hagen, “Barotropic Tidal Circulation in the South Atlantic Bight: On the Influence of the Atlantic Intracoastal Waterway,” Proceedings of the 8th International Conference on

Hydroscience and Engineering, Nagoya, Japan, September 8-11, 2008.

Catbas, F.N. and D.M. Frangopol, “Systems-based Monitoring Approaches for Improved Infrastructure

Management under Uncertainty: Novel Approach,” Proceedings of the International Conference on

Bridge Maintenance, Safety and Management, Seoul, Korea, July, 13-17, 2008.

Catbas, F.N., D.M. Frangopol, and A.E. Aktan, “Integrative Research Supporting Decision Making for

Bridges,” Proceedings of the International Conference on Bridge Maintenance, Safety and Management,

Seoul, Korea, July, 13-17, 2008.

Catbas, F.N., M. Gul, R. Zaurin, H.B. Gokce, D. Maier, T. Terrell, “Structural Health Monitoring for

Life Cycle Management of Bridges,” International Association for Life-Cycle Civil Engineering, Lake Como, Italy, June 11-14, 2008.

Catbas, F.N., F.L. Moon and A.E. Aktan, “Structural Identification of Constructed Systems: An

Integrated Approach by the ASCE Committee,” Proceedings of the ASCE Structures Congress, Performance of Structures, Vancouver, Canada, April 21-24, 2008.

24

Chandra, R. S., and H. Al-Deek, “Cross Correlation Analysis and Multivariate Prediction of Spatial Time

Series of Freeway Traffic Speeds,” Transportation Research Board 87th Annual Meeting, Washington, DC, January 13-17, 2008.

Chang, N.B., “Reuse Potential of Tire Crum in a Green House Program: Linking the Scrap Tire

Recycling Industry with the Construction Industry,” Gordon Conference on Industrial Ecology, New London, NH, August 17-22, 2008.

Chang, N.B. and M. Wanielista, “Subsurface Wetland Systems for On-site Wastewater Treatment and Reuse,” 2008 International Low Impact Development Conference, Seattle, WA, November 16-19, 2008.

Chang, N.B., M. Wanielista, and F. Hossain, “Material Characterization and Kinetics Study of Green Sorption Media for Nutrient Removal in Stormwater Management Facilities,” ASCE World

Environmental and Water Resources Congress, Honolulu, Hawaii, May 13-16, 2008.

Chang, N.B., M. Wanielista, and F. Hossain, “Optimal Design of Green Sorption Media Filtration System for Nutrient Removal in Stormwater Ponds,” 2008 International Low Impact Development

Conference, Seattle, WA, November 16-19, 2008.

Chang, N.B., Y. Yang, J.A. Goodrich, and S. Buchberger, “Multiple Satellite Remote Sensing Images for

the Derivation of a Water Availability Index,” ASCE World Environmental and Water Resources

Congress, Honolulu, Hawaii, May 13-16, 2008.

Chopra, M., “Design and Construction of a Test Bed for Erosion and Control BMP Testing,”

STORMCON 2008, Orlando, FL, August 5, 2008.

Chopra, M., “Pervious Pavement Systems," ASCE Annual Low Impact Design Conference, Seattle, WA,

November 18, 2008.

Chopra, M., M. Hardin, and E. Stuart, “UCF Erosion and Index testing,” H2O and Erosion Control

Workshop, Orlando, FL, March 14, 2008.

Chopra, M. and M. Wanielista, “Performance of Pervious Pavements,” Design Conference, Orlando, FL, July 29, 2008.

Das, A., M. Abdel-Aty and A. Pande, "Severity Analysis of Crashes on Multilane Arterials Using Conditional Inference Forests," Transportation Planning and Implementation Methodologies for

Developing Countries, IIT Bombay, December 3-6, 2008.

Dere, Y. and F. N. Catbas, “Boundary Condition Parameter Estimation for Structural Identification,”

Proceedings of the International Conference on Bridge Maintenance, Safety and Management, Seoul,

Korea, July, 13-17, 2008.

Duranceau, S.J., “Considerations for Blending Permeate into Water Distribution Systems,” Proceedings

2008 Joint American Membrane Technology Association and Southeast Desalting Association

Conference and Exposition, Naples, FL, July 14-17, 2008.

Duranceau, S.J., “Desalination Post-Treatment Considerations,” Conference Proceedings of the Florida

Section of the American Water Works Association, Orlando, FL, November 30 - December 3, 2008.

25

Duranceau, S.J., “Industry Advancements: Membranes, Pressure Vessels and Floating Seawater

Desalting Facilities,” Proceedings 2008 Joint American Membrane Technology Association and Southeast Desalting Association Conference and Exposition, Naples, FL, July 14-17, 2008.

Duranceau, S.J., “Stabilization of Desalted Water Supplies,” Proceedings of the 2008 American Water

Works Association Annual Conference and Exhibition, Atlanta, GA, June 8-12, 2008.

Ernest, A., K. Andrew, and N.B. Chang, “Spatial Rule-based Expert System for Optimal Planning of

Sensor Network in Drinking Water Systems,” ASCE World Environmental and Water Resources Congress, Honolulu, Hawaii, May 13-16, 2008.

Figueroa, V., C.D. Cooper, and K.R. Mackie, “Estimating Landfill Greenhouse Gas Emissions from Measured Ambient Methane Concentrations and Dispersion Modeling,” 101

st Annual Conference and

Exhibition of the International Air & Waste Management Assoc., Portland, OR, June 24-27, 2008.

Gawande, N., N.D. Berge, and D.R. Reinhart, "A Three Phase Microbiological and Chemical Kinetic-and-Equilibrium Model (BIOKEMOD-3P) For Simulating Solid Waste Biodegradation," Global Waste

Management Symposium, Copper Mountain, CO, September 9-12, 2008.

Gayah, V., M. Abdel-Aty and A. Pande, "Evaluating Route Diversion as a Strategy for Reduction of

Real-Time Crash Risk on Freeways Using Microscopic Simulation," 10th International Conference on

Applications of Advanced Technologies in Transportation, Athens, Greece, May 27-31, 2008.

Gul, M. and F.N. Catbas, “Modal Flexibility and Curvature For Damage Assessment: Laboratory

Demonstrations,” Proceedings of the International Conference on Bridge Maintenance, Safety and

Management, Seoul, Korea, July, 13-17, 2008.

Gul, M. and F.N. Catbas, “Statistical Pattern Recognition Applications for Damage Detection,”

Proceedings of the 26th International Modal Analysis Conference, Orlando, FL, February 4-7, 2008.

Guo F., X. Wang, and M. Abdel-Aty, "Safety Analyses of Signalized Intersections Using Hierarchical

Bayesian Spatial Models," Joint Statistical Meeting 2008, Denver, CO, August 3-7, 2008.

Hagen, S.C., D.M. Parrish, and P. Bacopoulos, “An Optimal 2D Mesh for the South Atlantic Bight and

Atlantic Intracoastal Waterway System,” Proceedings of the 8th International Conference on

Hydroscience and Engineering, Nagoya, Japan, September 8-11, 2008.

Harb, R., E. Radwan, "Toll plaza Configuration Optimization Using SHAKER a well Calibrated

Queuing Model," The Transportation Planning and Development Conference, Bombay India, December 3-6, 2008.

Harb, R., E. Radwan, S. Ramasamy, C. Russo, and M. Zarillo, "Evaluation of SHAKER Model for

Implementation on the Florida Turnpike Enterprise (FTE), A Pilot Study," The Proceedings of the 10th International Conference on Applications of Advanced Technologies in Transportation, Athens, Greece,

May 27-31, 2008.

Harb, R., E. Radwan, S. Ramasamy, K. Shaaban, V. Dixit, "Short –Term Work Zone Lane Management

Needs," The Proceedings of the 10th International Conference on Applications of Advanced

Technologies in Transportation, Athens, Greece, May 27-31, 2008.

26

Harb, R., X. Yan, E. Radwan, and X. Su, "Analysis of Crash Avoidance Maneuvers, Based on

Classification Trees and Random Forests," The Proceedings of the Transportation Research Board 87th Annual Meeting, Washington D.C., January 10-14, 2008.

Khalafallah, A., “Neural Network Based Model for Predicting Housing Market Performance,”

Proceedings of the 12th

International Conference on Computing in Civil and Building Engineering, Beijing, China, October 16-18, 2008.

Lovins, W.A., S.J. Duranceau, R. Weiss, J. Vargas, and J. Beleais, “Chemical Pretreatment Optimization for NF and RO Processes: Pilot and Full-Scale Experiences,” Proceedings 2008 Joint Conference and

Exposition Membrane Week- American Membrane Technology Association and Southeast Desalting

Association, Naples, FL, July 14-17, 2008.

Mackie, K., J-M. Wong, and B. Stojadinovic, “Post-earthquake Bridge Repair Cost Evaluation

Methodology,” In Proceedings of the 6th National Seismic Conference on Bridges and Highways,

Charleston, SC, July 27-30, 2008.

Mackie, K.R., J-M. Wong, and B. Stojadinovic, “Probabilistic Methodologies for Prediction of Post-

Earthquake Repair Costs and Repair Times,” In Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, October 12-17, 2008.

Mahgoub, H., A. Oloufa, and S. Spahi, "Commercial Vehicles Remotely Operated Compliance Stations (ROCStm) in Florida," Transportation Research Board Meeting, Washington, D.C., January 10-14,

2008.

Makkeasorn, A., C.H. Cheng, and N.B. Chang, “Use of MODIS Satellite Images to Investigate the Chlorophyll-a Concentrations in Lake Okeechobee, Florida,” SPIE, Remote Sensing and Modeling of

Ecosystems for Sustainability V, San Diego, CA, August 13, 2008.

Nalamothu, R.C., D.R. Reinhart, R.L. Wayson, A. Martin, and M. Rogoff, “Urban Infilling Impacts on

Florida Solid Waste Facilities,” SWANA Landfill Symposium and Planning & Management Conference,

Palm Springs, CA, June 6-10, 2008.

Nezamuddin, N. and H. Al-Deek, “Developing a Microscopic Toll Plaza and Toll Road Corridor Model

Using PARAMICS,” Transportation Research Board 87th Annual Meeting Compendium of Papers CD-

ROM, Washington, DC, January 13-17, 2008.

Pun, M., W.E. Woldt, and G.T. Yeh, "Watershed Modeling for Surface-Groundwater Interaction,"

Proceedings of the World Environmental and Water Resources Congress, Honolulu, HI, May 12-16, 2008.

Radwan, E. and V. Dixit, "Two Fluid Model Application to the Orlando Downtown Network," The

Transportation Planning and Development Conference, Bombay, India, December 3-6, 2008.

Radwan E., R. Harb, "Dynamic Early Merge and Dynamic Late Merge at Work Zones Lane Closures,"

The 4th International Gulf Conference On Roads, Doha, Qatar, November 10-13, 2008.

Ramachandran, B. and H. Al-Deek, “An Internet Based Spatial Data Warehousing Approach for

Advanced Traveler Information System,” Transportation Research Board 87th Annual Meeting Compendium of Papers CDROM, Washington, D.C., January 13-17, 2008.

27

Randall, A.A. and Y. Chen, "The Kinetics of Anaerobic and Aerobic Carbon and Phosphorus

Transformations for a Septic Wastewater With Varying Propionate:Acetate Ratios," The Proceedings of the 81

st Annual Water Environment Federation Technical Exhibition and Conference, Chicago, IL,

October 18-22, 2008.

Randall, A.A., Y. Chen and C. Zhang, "The Stoichiometry and Kinetics of Enhanced Biological Phosphorus Removal Driven by Propionate:Acetate Mixtures," The Proceedings of the 4

th International

Water Association Sequencing Batch Reactor Conference, Rome, Italy, April 7-10, 2008.

Reinhart, D., “MSW Landfills: Temperature and Energy Issues,” 5

th Intercontinental Landfill Research

Symposium, Copper Mountain, CO, September 12-14, 2008.

Reinhart, D., A. Kumar, and T. Townsend, “Temperature Inside the Landfill: Effects Of Liquid

Injection,” Global Waste Management Symposium, Copper Mountain, CO, September 9-12, 2008.

Sextos, A., K. Mackie, B. Stojadinovic, and O. Taskari, “Simplified P-y Relationships for Modeling Embankment-abutment Systems of Typical California Bridges,” In Proceedings of the 14th World

Conference on Earthquake Engineering, Beijing, China, October 12-17, 2008.

Shan, H., G.T. Yeh, G. Hu, and T.S. Wu, "An Integrated Numerical Model of Surface Water

Hydrodynamics, Subsurface Flow, and Overland Runoff," Proceedings of the World Environmental and

Water Resources Congress, Honolulu, HI, May 12-16, 2008.

Shin, H., P. Arduino, S.L. Kramer, and K. Mackie, “Seismic Response of a Typical Highway Bridge in

Liquefiable Soil,” In Proceedings of 4th Decennial Geotechnical Earthquake Engineering and Soil

Dynamics Conference, Sacramento, CA, May 18-22, 2008.

Susoy, M., F.N. Catbas and D.M. Frangopol, “Evaluation of Time-Variant Bridge Reliability Using

Structural Health Monitoring,” Proceedings of the 26th International Modal Analysis Conference,

Orlando, FL, February 4-7, 2008.

Takahashi, N., Q. Wang, and S.C. Hagen, “Study of a Hurricane Storm Surge Hindcast for the

Pascagoula River, Mississippi,” Proceedings of the 8th International Conference on Hydroscience and Engineering, Nagoya, Japan, September 8-11, 2008.

Terzic, V., K.R. Mackie, and B. Stojadinovic, “Experimental Evaluation of the Residual Axial Load Capacity of Circular Bridge Columns,” In Proceedings of the 14th World Conference on Earthquake

Engineering, Beijing, China, October 12-17, 2008.

Wang X. and M. Abdel-Aty, "Left-turn Crash Injury Severity Analyses Using Partial Proportional Odds

Models: Significant Factors and Varying Effects," 87th Annual Meeting of the Transportation Research

Board, January 10-14, 2008.

Wayson, R.L., J. MacDonald, and M. Berrios, "Update of OBSI in Florida," Transportation

Research Board ADC40 Committee on Transportation Related Noise and Vibration, Key West, FL, July

20-23, 2008.

Weaver, R.J., D.N. Slinn, H.C. Graber, A.T. Cox, S.C. Hagen, and R.E. Jensen, "Storm Surge

Forecasting in Lake Pontchartrain," 2008 Ocean Sciences Meeting, Orlando, FL, March 2-7, 2008.

28

Wong, J-M., K. Mackie, R. Porter, and B. Stojadinovic, “Reinforced Concrete Bridge Seismic Damage

and Loss Scenarios,” In Proceedings of the 6th National Seismic Conference on Bridges and Highways,

Charleston, SC, July 27-30, 2008.

Yan X., M. Abdel-Aty, E. Radwan, X. Wang and P. Chilakapati, "Assessing Rear-End Crash Risk at

Signalized Intersections Based on the Driving Behavior," 87th Annual Meeting of the Transportation Research Board, January 10-14, 2008.

Yeh, G.T. and G.B. Huang, "A Characteristics-based Finite Element Method for Simulating Two-dimensioanl Overland Flow Problems," Proceedings of the World Environmental and Water Resources

Congress, Honolulu, Hawaii, May 12-16, 2008.

Yeh, G.T. and H. Shan, "A Mixed Lagrangian-Eulerian and Finite Element Approach to Modeling

Variably Saturated Flows in Three Dimensions," Proceedings of the World Environmental and Water

Resources Congress, Honolulu, HI, May 12-16, 2008.

Zaurin, R. and F.N. Catbas, “Benchmark Studies for Structural Health Monitoring using Computer

Vision,” Proceedings of the International Conference on Bridge Maintenance, Safety and Management,

Seoul, Korea, July, 13-17, 2008.

Zaurin, R. and F.N. Catbas, “Demonstration of a Computer Vision and Sensor Fusion Structural Health

Monitoring Framework on UCF 4-span Bridge,” Proceedings of the 26th International Modal Analysis Conference, Orlando, FL, February 4-7, 2008.

Zhao, B., A.A. Randall, J.S. Taylor, "Evaluation Of The Impacts Of Corrosion Inhibitors On Bulk and

Biofilm Heterotrophic Bacteria," Water Quality Technology Conference, Cincinnati, OH, November 16-19, 2008.

Electrical Engineering and Computer Science (EECS)

Abdelwahab, M. and W.B.Mikhael, “Parallel Structure System Employing PCA and VQ in the Transform

Domain for Facial Recognition,” The 51st IEEE Midwest Symposium on Circuits and Systems, Knoxville,

TN, August 10-13, 2008.

Abu Qahouq, J., W. Al-Hoor, W. Mikhael, L. Huang and I. Batarseh, “Analysis and Experimental Results of an Adaptive-Step-Size Switching-Frequency Auto-Tuning Digital Controller,” IEEE: Power

Electronics Specialists Conference, Rhodes, Greece, June 15-19, pp. 4597-4602.

Ahmad, K., W. L. Jones and T. Kasparis, “An Improved Oceanic Rainfall Retrieval Algorithm for the

SeaWinds Scaterrometer,” 2008 IEEE International Geoscience & Remote Sensing Symposium, Boston,

MA, July 6-11, 2008.

Ahmad, K., W. L. Jones and T. Kasparis, “Estimation of Oceanic Rainfall using Passive and Active

Retrievals from QuikSCAT”, TRMM International Science Conference, Las Vegas, NV, February 4-8,

2008.

Ahmad, M.Z. and D. Turgut, “Congestion Avoidance and Fairness in Wireless Sensor Networks,”

Proceedings of IEEE Global Telecommunications Conference, New Orleans, LA, November 30-December 4, 2008, pp.1-6.

Al-Hoor, W., J. Abu-Qahouq, W.B. Mikhael, L. Huang and I. Batarseh, “Multivariable Adaptive

29

Efficiency Optimization Digital Controller,” IEEE Power Electronics Specialists Conference, Rhodes,

Greece, June 15-19, 2008, pp. 4590-4596.

Al-Sweiss, S., P. Laupattarakasem, W. L. Jones and R. Roeder, “A Ku-band Active/Passive Wind Vector

Retrieval over the Ocean”, Proceedings of the IEEE International Geoscience & Remote Sensing

Symposium, Boston, MA, July 6 - 11, 2008.

Ali, S. and M. Shah, “Floor Fields for Tracking in High Density Crowded Scenes," European

Conference on Computer Vision, Marseille, France, October 12-18, 2008.

Amarin, R., J. Johnson, W.L. Jones and C. Ruf, “Performance Simulations for a Synthetic Aperture

Radiometer Measuring Peak Surface Wind Speed in Hurricanes”, Proceedings of the IEEE International Geoscience & Remote Sensing Symposium, Boston, MA, July 6 - 11, 2008.

Amarin, R., C.S. Ruf, L. Jones, J.W. Johnson and S.S. Chen, “Improved Microwave Radiometric

Imaging of Surface Wind Speed Dynamics in the Hurricane Eyewall,” AMS 28th Conference on Hurricanes and Tropical Meteorology, Orlando, FL, April. 28 - May 2, 2008.

Anna, K. and M. Bassiouni, "A Distributed Admission Control to Provide Statistical QoS in P-Persistent 802.11 MAC Protocol," Proceedings of IEEE Wireless Telecommunications Symposium, Pomona, CA,

April 24-26, 2008.

Ashraf, N. and H. Foroosh, “Robust Auto-Calibration of a PTZ Camera with Non-overlapping FOV,”

International Conference on Pattern Recognition, Tampa, FL, December 8-11, 2008.

Aslam, B., P. Wang and C.C. Zou, “An Economical, Deployable and Secure Vehicular Ad hoc

Network,” Proceedings of IEEE Military Communications Conference, San Diego, CA, November 17-

19, 2008.

Aytar, Y., M. Shah and J. Luo, “Utilizing Semantic Word Similarity Measures for Video Retrieval,”

IEEE Computer Society Conference on Computer Vision and Pattern Recognition, Anchorage, AK, June

24-26, 2008.

Bag, A. and M.A. Bassiouni, “Routing Algorithm For Network of Homogeneous and Id-Less Biomedical

Sensor Nodes (RAIN)," Proceedings of