2008 Electronic Catalog - Molded Products - Dialysis ...moldedproducts.com/2008 Electronic Catalog.pdf · Instructions for Use: Piggy-Back the MPC-75 indicator extension with your

04/0

8

Item Page Number

Latex-Free Injection Sites 1

Male Female Luer Caps 1

Transducer Protector 2

Transducer Protector with Luer Extension 3

Sterile Recirculation Sets 4

Specialty Connectors 5

Sterile Blood Connectors 6-7

Double Dialyser Holder 8

Non-Sterile Specialized Dialysate Lines 9

Dialysate Line w/ Flow Restrictor 10-11

Dialysate Line Recirculation Set 12

Dialyzer Holder 13

Visor with Safety Face-Shield 14-15

Tube Occluding Forceps 16

Combination Towel Clamp 17

Fistula Pressure Clamp 18

Fistula Pressure Clamp Ultra ‘Grip Cover’ 19

Item Page Number

Dialyzer Pre-Rinse System 20

Sink System 21

Barrier Adapter with Q-Seal 22

Non-Sterile Lines 23

Kidney Storage Caps 24

1/4” Quick Disconnect 25

Medical Grade Vinyl Tubing 25

Hansen Style Female Connectors 26-27

Hansen Coupling 28

Male Hansen Connectors 29

Barbed T-Fittings 30

Dialysate Hose Clamps 30

Barb Fitting 31

Syringe Adapter 31

Dialysate Sampling Port Kit 32

Custom Injection Molding and Machining Info 33

INDEX

Dimensions:

Inlet to outlet: .9” (23mm)

Diameter: .8” (20mm)

Filtration area: 1.9cm2

Materials:

Housing: Co-Polymer

Hydrophobic Membrane: PTFE (Gore-tex)

Membrane Pore Size: 0.2µm

Line side: Standard Luer Lock

Machine side: Standard Luer Lock

Pressure Limit: 35 PSI Inlet

Characteristics: High Flow / Fast Response

Connections:

Special Features:

• Prevent blood and dialyzing fluid from damaging sensitive transducers

• Sterile, Non-Pyrogenic,

Non-Toxic • Hydrophobic Filters

Part Number

Double Luer Lock

Packaging

MPC-90 Yes Bulk Packaged

300 per box 7500 per case

MPC-90TE Yes

Tamper Evident Individually Packaged

150 per box 3300 per case

MPC-90

COMPARABLE TO: Medisystems® Part # M8-2002

TRANSDUCER PROTECTORS IN-LINE PROTECTIVE DEVICES FOR PRESSURE MONITORS ON HEMODIALYSIS EQUIPMENT

Phone: (800) 435-8957 • Fax: (800) 227-7935 • E-mail: [email protected] • www.moldedproducts.com

2


1

Capped injection sites can be used where medication may need to be administered or wherever a sample may need to be drawn.

MPC-100

• ISO 594/1 and 594-2

• Standard Luer Lock

• Sterile

• Self-Sealing

Also Known As:

• PRN Adapter

• 5/8” Intermittent Injection Site

• Heparin Lock

INJECTION SITE LATEX FREE 5/8” INTERMITTENT INJECTION SITE

Sterile Luer Lock Caps (male & female). Use to cap off male or female luers. These sterile caps are non-vented and do not have an access port.

Comparable To: RPC® Part # 7001-3915

Becton & Dickinson® Part # 38-1271-1 Individually Packaged

(1 pc. in 1 Pouch) 300 pcs. per box or 7,500 pcs. per case

MPC-125B MPC-125Y MPC-125

MALE FEMALE LUER CAPS ALSO KNOWN AS: DEAD END CAPS

COMPARABLE TO: RPC® Part # 7001-3926

MPC-100

Packaged: 1 blue and 1 red per

set (2 pcs. in 1 Pouch) 100 sets per bag or 5,500 sets per case

Individually Packaged 300 per box or 7,500 per case

Instructions for Use: Piggy-Back the MPC-75 indicator extension with your usual bloodline (with transducer protector) for external, visual indication of bloodline-supplied transducer protector breaches (strike-through). If your bloodline does not come equipped with transducer protectors, a sterile transducer protector must be placed between the indicator extension and the bloodline set. Immediate replacement of this product should occur if any sign of contamination (fluid or blood) is seen. Regular replacement should occur as determined by your unit administrator and unit protocols. In no event should fluid in the line be allowed to remain during treatment.

For more information on Potential Cross-Contamination Linked to

Hemodialysis Treatment you can find the FDA safety alert on the Center for

Devices and Radiological Health homepage at www.fda.gov/cdrh/safety/althin.html

TRANSDUCER PROTECTOR-LUER EXTENSION EXTERNAL VISUAL INDICATOR FOR TRANSDUCER PROTECTOR FAILURES

Special Features:

• Prevents blood contamination of the internal pressure monitoring lines.

• Prevents Cross-Contamination!

• Moves the redundant transducer protector to the outside of the machine for visual inspection.

• Gives a clear, visual indication that a Strike-Through has occurred.

• Can enhance ability to determine contamination problems.

MPC-75

Packaging

Information:

100 pieces per box

Sold with or without

date/document tag.

Machine Side

Bloodline Side

Strike Through Indicator

Fluid present

when bloodline supplied

transducer protector

has breached

MPC-75 Tag

Date / Document Tag Packaged: 25 per bag


3

STERILE RECIRCULATION SETS MALE TO MALE LUER ADAPTER

Special Features

• Sterile Fluid Path!

• Non-Slip Finish!

• Blood Compatible!

• End caps can be used for capping off luer lines!

• Use to connect lines or mis-matched bloodlines.

Indications for Use Extension for connecting arterial and/or venous fistula connectors to the hemodialysis blood tubing. Gender Changer / Recirculation

Set / Extension Adapter for hemodialysis blood tubing.

MPC-150 COMPARABLE TO:

RPC® Part # 7001-3902W ------

Minntech® Part # 78398-042 ------

DaySpring® Part # RC100

MPC-150 Individually Packaged

200 per box or 5,000 per case

Recirculation sets include (2) FREE end caps! When using a sterile technique the end caps can be used to cap off luer

lines during patient removal for restroom breaks, etc.

Male to Male Luer Adapter

Bulk Packaged 100 per bag or 5,000 per case

MPC-140

Female to Male Luer Adapter


4

Part Number MPC-855 MPC-860 MPC-865

Description DIN Adapter Male Luer Lock

Fitting to Female DIN Connector

Female Luer Lock Fitting to Male DIN

Connector

Connectors (1) Barb fitting and (1) Female

DIN Fitting

(1) Male luer lock fitting and (1) Female

DIN Fitting

(1) Female luer lock fitting and (1) Male

DIN Connector

Overall Length 1-5/8" 4.5" 4.5"

Ends Capped NO YES YES

Packaging 10 sets per bag

(2) pcs. per set or 50 sets per case

Individually Packaged 25 pcs. per bag or 50 pcs. per case

Individually Packaged 25 pcs. per bag or 50 pcs. per case

Possible Use DIN Adapter - fits 3/16" ID tubing

Recirculation Set Extension Adapter

Recirculation Set Extension Adapter

SPECIALTY CONNECTORS NO ETO RESIDUALS, FLUID PATH STERILE, BLOOD COMPATIBLE


5

MPC-860

MPC-855

MPC-865

Part Number Connectors Overall Length

Sampling Port Present Packaging Possible Use

MPC-850-10 (2) DIN Connectors 12.5" NO

Individually Packaged

25 per bag or 750 per case

In-Series Tandem Dialysis

STERILE BLOODLINE CONNECTORS NO ETO RESIDUALS, FLUID PATH STERILE, BLOOD COMPATIBLE

MPC-850-SP

MPC-850 and MPC-850-16

MPC-800 and MPC-800-5

MPC-875

MPC-660S


6


7

MPC-850-16 (2) DIN Connectors 16.25" NO




MPC-850-SP (2) DIN Connectors 12.5" YES




MPC-800 (2) DIN

Connectors and (1) DIN Adapter

10" NO



Parallel Tandem Dialysis

MPC-800-5 (2) DIN

Connectors and (1) DIN Adapter

11.25" NO



Parallel Tandem Dialysis

MPC-875 (1) DIN

Connector and (1) DIN Adapter

12.25" NO



Bloodline Extension

MPC-660S (2) DIN Connectors 36.5" YES



Recirculation Loop


8

DOUBLE DIALYZER HOLDER ADJUSTABLE FOR IN-SERIES OR PARALLEL CONFIGURATION

MPCMPC--790 Double Dialyzer Holder790 Double Dialyzer Holder

Use to position two dialyzers side by side

during Tandem Dialysis. Use for either

Parallel or In-Series configurations.

MPC-790 Double Dialyzer Holder

shown in an In-Series configuration

MPC-790 Double Dialyzer Holder

shown in a Parallel configuration

• Adjustable to fit a variety of dialyzers • Manufactured from durable materials • Friction Pads - keep dialyzers in place

Packaged Individually or 20 pcs. per case

MPC-725A-R MPC-725A-W MPC-725A-B MPC-750A

Configuration Straight Line Straight Line Straight Line "Y" Line

Components (2) Female

Hansen Connectors

(2) Female Hansen

Connectors

(2) Female Hansen

Connectors

(2) Female Hansen Connectors and (1)

Male Hansen Connector

Possible Use

Parallel Tandem Dialysis Used With:

(2) Dialyzers, (2) Sterile Bloodline

Connectors (MPC-800 or MPC-800-5)

Packaging Individually Packaged



One Set Per Package

In-Series Tandem Dialysis used with: (2) Dialyzers, (1) Sterile Bloodline

Connector (MPC-850, MPC-850-16 or MPC-850-SP).

Color Red White Blue Red/Blue


9

MPC-750A Set

SPECIALIZED DIALYSATE LINES CUSTOM LENGTHS AVAILABLE

Picture depicts patented products

For more information on the benefits of using Tandem Dialysis see the following studies:

www.moldedproducts.com/anna.htm

www.moldedproducts.com/dualdialyzers.htm

www.moldedproducts.com/univofvastudy.htm

MPC-725

The flow restrictor gives the physician the ability to prescribe treatment specific to the individual.

Picture depicts patented product

MPC-728

DIALYSATE LINE WITH FLOW RESTRICTOR ENABLES THE PHYSICIAN TO PRESCRIBE TREATMENT SPECIFIC TO THE INDIVIDUAL

Part Number MPC-728

Configuration Straight Line W/Flow Restrictor

Components (2) White Female Hansen Connectors and (1) Flow Restrictor

Use In-Series Tandem Dialysis

Packaging Individually Packaged

NEW!!

The flow restrictor can be used to progressively vary the flow resistance and the rate of dialysate flow through the system. The positioning of the flow restrictor should be based on the readings provided by indicators associated with the dialysis machine. The flow restrictor will remain in whatever position it is placed in by the operator.


10

When the flow restrictor is engaged, the dialysate flow through the restrictor provides the pressure differential for large ultrafiltration in dialyzer # 1, yielding additional convective removal of middle weight molecules. As the flow resistance of the MPC-728 is increased, the dialysate pressure in the dialysate compartment of dialyzer # 2, is at a very high rate while the dialysate pressure in the dialysate compartment of Dialyzer # 1 is at a very low rate, thus permitting an increase in fluid ultrafiltration from the blood to the dialysate in dialyzer # 1 and backfiltration of dialysate to the blood in dialyzer # 2. The quantity of fluid ultrafiltered in dialyzer # 1 is compensated for by backfiltation of dialysate into dialyzer # 2. Therefore mimicking the natural kidney. The volumetric control in the dialysis machine will ensure the balance of fluid, accounting for proper removal of fluid gained by the patient since the preceding dialysis. Since it will be possible to variably control the rate of ultrafiltration and backfiltration by adjusting the flow restrictor, it will be possible to apply this treatment to a larger number of patients with a wide range of attainable blood flows. This also provides a method for individualizing the treatment for each patients’ needs.


11

MPC 728

MPC-850 Series

Machine Dialysate Line (Dialysate from

machine)

When set to maximum, the flow restrictor still allows for a minimum flow path with a fixed flow resistance. This serves to prevent the triggering of machine alarms and the clotting of the blood flow circuit of the dialyzer due to excessive ultrafiltration.

D I A L

Y Z E R

# 2

D I A L Y Z E R

# 1

Bloodline to Patient

Backfiltration of dialysate to

the blood

Ultrafiltration from blood to the dialysate

Machine Dialysate Line

(Dialysate to the machine)

Volumetric Control properly ensures the quantity of dialysate entering the dialyzers is equal to that leaving the dialyzers, plus a defined quantity of excess fluid.

Dialysis Machine with Volumetric

Control

The flow restrictor of the MPC-728 enables the user to adjust the flow upon evaluating the TMP (Transmembrane Pressure) levels. As the flow restrictor is engaged it gradually reduces the flow through the tubing, thus altering the pressures which enhance ultrafiltration and convective removal of middle molecular weight solutes.

= Dialysate Flow = Blood Flow

Fluid loss that occurs through ultrafiltration in Dialyzer # 1 is

compensated for in Dialyzer # 2 by backfiltration of the dialysate to the blood.

Bloodline from Patient

DIALYSATE LINE RECIRCULATION SET SPECIALIZED DIALYSATE RINSE LINE

May be used as a recirculation connector: Connect both dialysis

machine dialysate lines together for rinsing when dialyzer is not present.

Packaged 10 per bag

or 160 per case MPC-740

MALE TO MALE HANSEN ADAPTER RELIABLE QUALITY

Special Features:

• Excellent Chemical Resistance!

• Durable!

• Cost efficient alternative to other products currently on the market.

Packaged 10 pieces per bag!

MPC-741


12


13

DIALYZER HOLDER COMPARABLE TO MOST OEM DIALYZER CLAMPS

Special Features:

• Use to easily attach dialyzer to dialysis machine.

• Attaches easily to 3/4” (18mm) to

1-1/8” (28mm) IV Pole. • Adjustable to fit a variety of dialyzers. • Stainless steel - won’t rust out. • May be cleaned with soap and water or a

disinfectant approved for use by your unit’s protocols.

• Can be easily sanitized using your unit’s

disinfectant protocols.

MPC-1400 Dialyzer Holder

Our visors and face-shields are also available in a combo pack. Each combo pack includes three reusable visors (your choice of red, white or blue) and 10 ( 6” or 7” ) disposable face-shields.

SAFETY FACE-SHIELD ANTI-GLARE AND ANTI-FOG


14

04/0

8

Our reusable visors are comfortable,

lightweight, and fit a variety of head sizes.

COMPARABLE TO:

Op-d-op® Part # 100-3282

Visor Available in Red, White or Blue

• Latex-Free

• Lightweight

• Comfortable

• Shields are easy on and easy off

• Visor fits snuggly to a variety of head sizes without discomfort.

• Replacement face-shields can be purchased separately, so you only pay for what you need.

Part Number Strap Description Packaging

MPC-300 Set Elastic Strap 1 Visor (red, white or blue),

1 clear 6” disposable face-shield and 1 clear 7” disposable face-shield

Set

MPC-300 CP6 Elastic Strap 3 Visors (red, white or blue) and 10 clear 6” disposable face-shields Combo Pack

MPC-300 CP7 Elastic Strap 3 Visors (red, white or blue) and 10 clear 7” disposable face-shields Combo Pack

MPC-301 Set No Strap 1 Visor (red, white or blue),

1 clear 6” disposable face-shield and 1 clear 7” disposable face-shield

Set

MPC-301 CP6 No Strap 3 Visors (red, white or blue) and 10 clear 6” disposable face-shields Combo Pack

MPC-301 CP7 No Strap 3 Visors (red, white or blue) and 10 clear 7” disposable face-shields Combo Pack

MPC-302 Set Adjustable Strap

1 Visor (red, white or blue), 1 clear 6” disposable face-shield and

1 clear 7” disposable face-shield Set

MPC-302 CP6 Adjustable Strap

3 Visors (red, white or blue) and 10 clear 6” disposable face-shields Combo Pack

MPC-302 CP7 Adjustable Strap

3 Visors (red, white or blue) and 10 clear 7” disposable face-shields Combo Pack

MPC-310 N/A Clear 6” Disposable Replacement Face-shields 10 per bag

MPC-320 N/A Clear 7” Disposable Replacement Face-shields 10 per bag


15

MPCMPC--301301 No StrapNo Strap

MPCMPC--302 Adjustable Strap302 Adjustable Strap

MPCMPC--300300 Elastic StrapElastic Strap

Patented No Fog

Anti-Glare Shield


16

Equipped with a deep grooved superior maxi-lock system that will not come off the line unless you take it off. This exclusive maxi-lock system ensures you a secure

and durable hold every time!

Part Number MPC-200 MPC-225

Length 11.3 cm (4.4375 in.)

12.4 cm (4.875 in.)

Finger Hole Diameter

2.5 cm (1.00 in.)

2.858 cm (1.125 in.)

Packaging 100 per bag or 1,600 per case

100 per bag or 1,000 per case

Comparable to:

RPC® Part # 7001-3950 Baxter® Part # 5K3739

Kendall® Part # 31140315 Dravon® Part # A-110

MPC-200 Available in

Blue and Yellow

MPC-225 Available in

Blue, Red, or White

• Holds Color - Will Not “Chalk-Out”.

• Easy to Use!

• Lightweight!

• Comfortable oval finger holes accommodate gloved hands.

• Smooth jaws won’t damage occluded tubing.

• Jaws remain aligned when tubing is occluded.

• Safe & Effective!

DISPOSABLE TUBE OCCLUDING FORCEPS SUPERIOR MAXI-LOCK SYSTEM


17

Superior Maxi-Lock System: Our combination towel clamp and tube occluding forceps are equipped with a superior maxi-lock system which will not come off unless you take it off. This exclusive maxi-lock system ensures you a secure and durable hold every time.

Special Feature: Our MPC-275 is the most versatile combination towel clamp / tube occluding forceps available on the market today. In addition to securing drapes, bedding, towels, sponges, and other materials gathered around tubes and leads, the MPC-275 can be used to occlude tubing. This combination makes the MPC-275 extremely useful and cost efficient.

MPC-275

Packaged 100 pieces per bag or 1,000 pieces per case.

COMBINATION TOWEL CLAMP SECURES DRAPES, TOWELS, SPONGES AND ALSO OCCLUDES TUBING

Super Grip: The jaws on our MPC-275 have a distinctive offset grooved surface, which ensures super gripping action.

• Heavy Duty! • Reliable! • Easy to Use!

• Exclusive Maxi-Lock System means it won’t come off unless you take it off!

• In addition to being a towel clamp the MPC-275 totally occludes tubing from monitor lines to pump segments.

• Large, comfortable finger holes!

MPC-250

Packaged 10 pieces per bag or 300 per case

FISTULA PRESSURE CLAMP ADJUSTABLE TO FIT MOST SIZE ARMS

• Constructed of Durable Plastic!

• Stainless steel spring - won’t rust out!

• Comfortable!

• Lightweight!


• Reliable!

• Designed to cradle patient’s arm, without pinching.

• Easy to Use!

• Arms remain aligned when applying pressure.

• Smooth surfaces won’t damage or pull patient’s skin.

• Can be easily sanitized using your unit’s disinfectant protocols.

• May be cleaned with soap and water or a disinfectant approved for use by your unit’s protocols.


18

Molded Products’ MPC-250 Fistula Pressure Clamp pictured with the ‘Ultra Grip’ cover in place.

Administers 1.0-1.5 lbs of pressure

COMPARABLE TO:

RPC® Part # 7001-3955 Minntech® Part # 78398-044

DaySpring® Part# FCD1


19

Part Number: MPC-255

Description Fistula Pressure Clamp ‘Ultra Grip’ Cover

Compatibility: Used in conjunction with gauze or a Super Stopper®

Packaged: 25 per bag or 300 per case

One Step Assembly!

Just slip the ‘Ultra Grip’ cover over the pressure pad of the fistula pressure clamp and it’s ready to use!

Note: This product has only been tested to be used in conjunction with the Molded Products’ Mid-America

Brand MPC-250 Fistula Pressure Clamp. This product is not recommended for use with fistula pressure

clamps not manufactured by Molded Products, Inc. The MPC-255 is manufactured with

Medical Grade Materials resistant to Renalyn,

Formaldehyde, Alcohol, Betadine and Chlorine.

The ’Ultra Grip’ is compatible with:

3% Hydrogen Peroxide, 4% Formaldehyde, 0.05% Sodium Hypochlorite, 0.8% Diacide

(Glutaraldehyde), 4% Renalin (Peroxyacetic Acid)

Special Features:

• Comfortable!


• Easy to Use!

• Can be easily sanitized using your unit’s disinfectant protocols.

• Gives you the flexibility you need in access care.

The ‘Ultra Grip’ is a flexible cover designed to be applied to our Fistula Pressure Clamp. When used in conjunction with our Fistula Clamp the ‘Ultra Grip’ is an excellent solution in alleviating slide-off issues that occur when using a fistula

clamp /gauze or a fistula clamp /Super Stopper® combination.

NNEWEW!!!!!!

MPC-255 The ‘Ultra Grip’ is an excellent solution when using a fistula

pressure clamp/Super Stopper® combination.

FISTULA PRESSURE CLAMP ‘ULTRA GRIP’ COVER ONE STEP ASSEMBLY

Barrier Adapter w/ Q-Seal

MPC

-670

Dia

lyze

r Pr

e-R

inse

Sys

tem

Barrier Adapter

with Q-Seal

Dialyzer Pre-Rinse Drain Line with Colder® Fitting (Part# APC17004)

Dialysate Port to Blood Port

Circulation Line with Adjustable Pulse Control

RO Water Line

Colder® Fitting (Part# APC17004)


20

DIALYZER PRE-RINSE SYSTEM QUICKLY PRE-CLEANS DIALYZERS USING TRANS-MEMBRANE VARIABLE PRESSURE-PULSES

Always use clean, sanitized barrier adapters to eliminate the potential of contamination from dialyzer to dialyzer.

Special Features:

• Clean Line - Stays Clean!

• Reduction in Chemical Expenses!

• Reduction in Capital Expenses! No Expensive machines to purchase or to maintain.

• Easy, time saving, cost efficient alternative to expensive machines and methods currently available.

System Includes: ⇒ (1) RO Water Line ⇒ (1) Dialyzer Pre-Rinse Drain Line ⇒ (1) Dialysate Port to Blood Port Circulation

Line with adjustable pulse control ⇒ (50) Barrier Adapters with Q-Seal

SINK SYSTEM GREAT FOR DIALYSER REPROCESSING

SINK SYSTEM INCLUDES:

Item Back Panel Shelf Small Pan

Tray Large Pan

Tray Small Pan

Large Pan

3rd Hand

Threaded Buttons

Quantity 3 1 1 1 2 1 1 4

Dimension 20” x 12” 18” x 7-5/8” 18” x 7-5/8” 18” x 7-5/8” 4-1/2” x 4-1/2” x 4” 15” x 4-1/2” x 4” 6” x 4” 1/4-20

BACK PANEL LARGE PAN

SMALL PAN TRAY

SMALL PAN

SHELF

3RD HAND

TROUBLE-FREE CLEAN UP! EASILY DISASSEMBLES FOR CLEANING IN THE SINK!

MPC-1190

System easily disassembles for trouble free clean-up!

• Back Panels attach to wall

• Trays and shelves attach to back panels

• Pans are easily inserted and removed from trays


21 ** Cabinet Bases and Stainless Steel Sinks Sold Separately, Please contact us for more information **

LARGE PAN TRAY


22

BARRIER ADAPTER WITH Q-SEAL EASILY CONNECT AND DISCONNECT

THEIRS OURS

• Contaminants are notorious for becoming trapped under O-rings. • No O-ring for contaminants to hide under!

• O-ring generated seal. Requires removal and replacement for disinfection. • Built in Q-Seal. No removal, no replacement,

no worry!

• Manufactured with PVC Material. (PVC material is known to contain DEHP and Phthalates)

• Manufactured from a Patented Medical Grade Material that is Latex Free, DEHP Free, PVC Free, and Phthalate Free!

-- LatexLatex--FreeFree -- PVC FreePVC Free

-- DEHP FreeDEHP Free -- Phthalate FreePhthalate Free



Comparable to Minntech® Part # 78397-699

Guidelines to Optimal Performance

Step 1: Twist the DIN end of the MPC-700 into the blood port of the Dialyser.

Step 2: Push the Colder® fitting end of the MPC-700 into the Renatron® machine connection.

That’s it! The MPC-700 is a very easy to use, cost efficient alternative to other products on the market. The Barrier Adapter with Q-Seal helps ensure patient safety from cross-contamination during reprocessing. This system easily connects and disconnects, which means no more fumbling with extra pieces and extensions.

MPC-700

MPC-700

NON-STERILE LINES MANUFACTURED WITH MEDICAL GRADE CLASS VI TUBING, DEHP FREE

MPC-825

MPC-742

MPC-671

MPC-875NS

MPC-665

Part Number Description Connectors Tubing ID Length Packaging

MPC-665 Drain Line (1) DIN Connector 3/16” 25.0” 25 per bag or 400 per case

MPC-671 Dialysate Port to Blood Port Circulation Line with Adjustable Pulse Control

(1) Female Hansen Connector (1) Quick Disconnect 3/16” 26.25" Sold Individually

or 20 per case

MPC-742 Male Hansen Connector to Female Quick Disconnect Adapter

(1) Quick Disconnect (1) Male Hansen Connector 1/4” 4.75" 10 per bag or

160 per case

MPC-825 Male to Male Recirculation Connector (2) DIN Adapters 3/16” 4.5" 25 per bag or

150 per case

MPC-875NS Non-Sterile DIN to Male DIN Connector (1) DIN Connector and (1) DIN Adapter 3/16” 12.25" 25 per bag or

400 per case


23


24

Molded Products disposable storage caps were designed with your patients safety in mind. In order to ensure contaminant-free storage of your dialyzers,

our storage caps are: Latex Free, DEHP Free, PVC Free, and Phthalate Free.

Part No: Description Style Vented Comparable To: Packaging Bag / Case

MPC-40 Blood Port Cap Twist On No Minntech® Part #78397-704 and 78398-366 200 / 10,000 MPC-50DV Dialysate Port Cap Push On Yes N/A 200 / 4,000

MPC-55 Blood Port Cap Twist On No RPC® Part # 7001-0001 and Minntech® Part # 78197-010 1,000 / 16,000

MPC-60B Blood Port Cap Push On No N/A 200 / 20,000

MPC-60D Dialysate Port Cap Push On No N/A 200 / 4,000

MPC-65 Dialysate Port Cap Push On No RPC® Part # 7000-003 and Minntech® Part # 78196-050 200 / 4,000

MPC-65V Dialysate Port Cap Push On Yes RPC® Part # 7000-0005 and Minntech® Part # 78398-367 200 / 4,000

KIDNEY STORAGE CAPS LATEX FREE, DEHP FREE, PVC FREE AND PHTHALATE FREE

Automatic Venting… simply install caps

and store in an upright position

These caps are compatible with: 3% Hydrogen Peroxide, 4% Formaldehyde, 0.05% Sodium Hypochlorite, 0.8% Diacide (Glutaraldehyde), 4% Renalin

(Peroxyacetic Acid)

MPC-55 Blood Port Caps and MPC-65V Vented Dialysate Port Caps shown.

Automatic Venting … Automatic Venting … simply install caps and store simply install caps and store

in an upright position, as shown.in an upright position, as shown.

Storage Caps are made of Medical Grade

Materials resistant to Renalyn, Formaldehyde,

Alcohol, Betadine & Chlorine.

MPC-40 MPC-55 MPC-65 MPC-65V

MPC-60B MPC-60D MPC-50DV

Features:

⇒ Tubing size: 1/4" ID

⇒ Pressure: Vacuum to 120 psi, 8.3 bar

⇒ Temperature: -40°F to 180°F continuous -40°C to 82°C continuous

Packaged 10 pieces per bag.

MPC-35


1/4" QUICK DISCONNECT EASILY CONNECT AND DISCONNECT

HEAVY WALL VINYL MEDICAL GRADE TUBING CLASS VI MEDICAL GRADE

Part Number ID OD Wall

MPC-730-T .375 .625 .125

MPC-731-T .250 .437 .094

MPC-732-T .180 .260 .040

Available in rolls of up to 100 ft.

Special Features:

• Custom Lengths Conveniently Available!

• Class VI Medical Grade MPC-730-T

MPC-731-T

MPC-732-T


25

FEMALE HANSEN CONNECTORS AVAILABLE IN RED, WHITE OR BLUE

MPC-761 Series MPC-762 and MPC-763 Series

MPC-764 MPC-766 Series

MPC-767 Series

SNAP TO LOCK

Snap-On Female Hansen

Style Connectors

Part Number Configuration Size Packaged

MPC-761 Barbed Fits 3/8" ID Tubing 10 per Bag

MPC-762 Angled Barb Fits 1/4" ID Tubing 10 per Bag


MPC-764 Straight Glue - On Fits 1/4" OD Tubing 10 per Bag

MPC-766 Straight Glue - On Fits 7/16" OD Tubing 10 per Bag

MPC-767 Available in White Only

Dead End - Comparable to Minntech® 78398-723 N/A 10 per Bag


26

HIGH-TEMP FEMALE HANSEN CONNECTORS FOR USE WITH MACHINES USING HEAT STERILIZATION, INCLUDING FRESENIUS® AND AKSYS®

MPC-771 and MPC-772 Series

MPC-773 and MPC-774 Series

MPC-776 and MPC-777 Series MPC-779

AVAILABLE IN RED, WHITE OR BLUE


27

High Temp Kynar (PVDF)

Hansen Connectors





MPC-776 Threaded 3/8-18 NPTF 10 per Bag

MPC-777 Threaded 1/4-18 NPTF 10 per Bag

MPC-779 Threaded (Internal) 1/2-14 NPTF 10 per Bag

Part Number Configuration Size Packaged

Socket Body Sleeve Back-Up Ring Plug Body

Valve Locking Balls O-Ring

Valve Sleeve Spring


28

Part Number

Thread Size

A B C D E Hex

MPC-786 1/4-18 NPTF - - 1.65 1.01 0.67 0.88

MPC-787 1/4-18 NPTF 2.38 1.45 - - - 0.88

Intended for use with air, water and various chemicals at low pressure. The Hansen Coupling is designed for use where an economical, light weight, corrosion resistant coupling is desired. All components except springs and seals are natural polypropylene. Valve springs are 316

Stainless steel and seals are Viton.

HANSEN COUPLING ECONOMICAL, LIGHTWEIGHT AND CORROSION RESISTANT

Packaged 10 pieces per bag

MPC-787

Socket

MPC-786

Plug

MALE HANSEN CONNECTORS EASY TO USE AND RELIABLE QUALITY

Temperature* PSI BAR

75° 110 8

200° 30 2

*235°F maximum sterilization temperature

Rated Pressure

Dimensions Part Number MPC-769 MPC-770 MPC-780 MPC-785

Material PVDF Polypropylene Polypropylene Polypropylene

Configuration Fits 1/4” ID Tubing Fits 3/8” ID Tubing 3/8-18 NPTF 1/4-18 NPTF

C 2.08 2.12 1.70 1.70 D 0.79 0.79 0.79 0.79

Hex 0.68 0.68 0.68 0.68

MPC-770

MPC-780 - - -

MPC-785

MPC-769

• MPC-769/MPC-770: Single Barbed fittings minimize leaks by having a smoother sealing surface than multi-barbed fittings.

• MPC-769: For use with all machines using heat

sterilization. Maximum Sterilization temperature 282oF.

Lightweight! Low Cost! Excellent Chemical

Resistance! Packaged 10 pieces per bag


29

DIALYSATE HOSE CLAMPS INSTALLS IN SECONDS

MPC-735 Special Features:

• Easy to Apply! Installs in seconds. • Lightweight! • Won’t cut into hose or tubing.

• Resistant to most chemicals.

• Temperature range is –25° to +275°F.


Special Features:

• Single-barbed fittings minimize leaks by having a smoother sealing surface than multi-barbed fittings.


• Temperature range is 36° to 175°F.


MPC-765

Fits 3/8” ID Tubing

Details: Range: 19/32” - 21/32”

Band Width: 0.22” Band Thickness: 0.07” Packaged 10 per bag

Max Pressure: 125 PSI at 70OF


30

BARBED T-FITTINGS SMOOTH SEALING SURFACE

Special Features:

• Reduce contamination by flushing out machine fittings and lines per unit protocols.

• Semi-Transparent fluid path allows easy viewing.

• Compatible with most syringes!

• Gender Changer - Male to Female!


BARB FITTING CONNECTS TUBING TO TUBING


31

MPC-775 Special Features:

• Repair split or cut tubing!

• Fits 3/16" ID


SYRINGE ADAPTER FLUSH OUT MACHINE FITTINGS AND LINES


MPC-145

Packaged 100 pieces per bag.

Leak Free ! Trouble Free!Leak Free ! Trouble Free!

Use our self-sealing Dialysate Sampling Port Kit within the dialysate fluid pathway of your dialysis machine for a fast, safe,

and reliable means of drawing your dialysate test samples! Compatible with all standard dialysis germicides.

Instructions for Use: 1.

1. Place Barbed T-Fitting Luer Connector into dialysate line in which samples are to be drawn.

2. Twist access site onto the luer connector of the Barbed T-Fitting inserted into line; turn clockwise to form a secure connection. 1.

3. Sanitize access site using your approved unit protocols regarding injection site preparation.

4.

4. Attach lever lock cannula to syringe.

5. Push the syringe cannula into the access site and advance.

6. Extract desired amount of sample and withdraw the cannula. The access site will seal automatically.

MPC-180 Kit Includes:

• (2) Sterile Access Sites

• (1) Barbed T-Fitting Luer Connector

• (2) Lever Lock Cannulas

DIALYSATE SAMPLING PORT KIT USE TO DRAW A DIALYSATE TEST SAMPLE

Low Cost Replacement PartsLow Cost Replacement Parts

• MPC-181 Replacement Needle-Less Access Sites • MPC-182 Replacement Lever Lock Cannulas • MPC-183 (3 ml) Luer Lock 2-Piece Syringe

MPCMPC--180180 Lever Lock Cannula

Access Site

Barbed T-Fitting Luer Connector

IN OUT

Fits 3/8” ID Tubing


32 Regular replacement of access site should

occur per your approved unit protocols.

Molded Products specializes in producing quality products for the medical, commercial, and industrial fields. Located in Southwest Iowa, Molded Products is close to transit routes enabling quick delivery times to all parts of the world. We maintain a complete tooling facility for moldmaking, machining and 24 hour a day injection molding.

Design…By utilizing state of the art technology for design, we have the ability to develop the product not only from a print but also from a model or sample. This technique allows for design flexibility, elimination of costly errors, and a reduction in time to market.

We are committed to high-quality products, affordable pricing, and on time delivery.

Production… Molded Products is a leading manufacturer of high-quality injection molded products. We utilize various sizes of injection molding machines as well as an excellent group of experienced toolmakers. When the 21-injection molding machines are at full production, they can produce up to 50 million parts a month.

Inspection… In-process and final inspections are conducted on each product lot manufactured. This constant attention to quality control further ensures that the customer's requirements are continually being met and adhered to.

Molded Products, Inc. Custom Injection Molding, Moldmaking & Machining

1112 Chatburn Avenue Harlan, IA 51537

JANUARY 2008 FEBRUARY 2008 MARCH 2008 Su M Tu W Th F Sa Su M Tu W Th F Sa Su M Tu W Th F Sa Su M Tu W Th F Sa

1 2 3 4 5 1 2 1 1 2 3 4 5

6 7 8 9 10 11 12 3 4 5 6 7 8 9 2 3 4 5 6 7 8 6 7 8 9 10 11 12

13 14 15 16 17 18 19 10 11 12 13 14 15 16 9 10 11 12 13 14 15 13 14 15 16 17 18 19

20 21 22 23 24 25 26 17 18 19 20 21 22 23 16 17 18 19 20 21 22 20 21 22 23 24 25 26

27 28 29 30 31 24 25 26 27 28 29 23 / 30

24 / 31 25 26 27 28 29 27 28 29 30

APRIL 2008

MAY 2008 JULY 2008 AUGUST 2008

Su M Tu W Th F Sa Su M Tu W Th F Sa Su M Tu W Th F Sa Su M Tu W Th F Sa

1 2 3 1 2 3 4 5 6 7 1 2 3 4 5 1 2

4 5 6 7 8 9 10 8 9 10 11 12 13 14 6 7 8 9 10 11 12 3 4 5 6 7 8 9

11 12 13 14 15 16 17 15 16 17 18 19 20 21 13 14 15 16 17 18 19 10 11 12 13 14 15 16

18 19 20 21 22 23 24 22 23 24 25 26 27 28 20 21 22 23 24 25 26 17 18 19 20 21 22 23

25 26 27 28 29 30 31 29 30 27 28 29 30 31 24 / 31 25 26 27 28 29 30

JUNE 2008

OCTOBER 2008 NOVEMBER 2008 DECEMBER 2008

Su M Tu W Th F Sa Su M Tu W Th F Sa Su M Tu W Th F Sa Su M Tu W Th F Sa

1 2 3 4 5 6 1 2 3 4 1 1 2 3 4 5 6

7 8 9 10 11 12 13 5 6 7 8 9 10 11 2 3 4 5 6 7 8 7 8 9 10 11 12 13

14 15 16 17 18 19 20 12 13 14 15 16 17 18 9 10 11 12 13 14 15 14 15 16 17 18 19 20

21 22 23 24 25 26 27 19 20 21 22 23 24 25 16 17 18 19 20 21 22 21 22 23 24 25 26 27

28 29 30 26 27 28 29 30 31 23 / 30 24 25 26 27 28 29 28 29 30 31

SEPTEMBER 2008

Documents

2008 Electronic Catalog - Molded Products - Dialysis ...moldedproducts.com/2008 Electronic Catalog.pdf · Instructions for Use: Piggy-Back the MPC-75 indicator extension with your