9
SERVING ALL ISLANDS 2010-2011 Resource Guide

2010-2011 HSA Resource Guide

Embed Size (px)

DESCRIPTION

Published in 2010 by Hawaii Pacific Steel Framing Alliance (www.hawaiisteel.com), a 'All-in-One' resource guide on steel framing which includes membership directory, benefits of steelframing and list of technical literatures on steel framing. For Hawaii and Pacific Rim construction/building industry.

Citation preview

Page 1: 2010-2011 HSA Resource Guide

Serving All iSlAndS

2010-2011 Resource Guide

Page 2: 2010-2011 HSA Resource Guide

an updated list of our members, officers, and directors, who are all experts in their respective fields in cold-formed steel construction. Please keep this handy guide in a convenient location throughout the year.

Mahalo for your interest in steel framing!

Tim Waite2010/11 President

Hawaii Pacific Steel alliance reSource directory 2010 | 3

Aloha and welcome to the 12th edition of the Hawaii Pacific Steel Framing Alliance (HSA) Resource Guide. This annual guide contains all the essential information concerning what you need to know about steel framing, or what we call cold-formed steel framing.

This guide is made possible by our advertising members that are featured in this section. Please

Your Alliance – Hawaii Pacific Steel Framing Alliance support these companies. Without their help we would not be able to make this information possible.

This year’s guide features informa-tion on why steel’s the deal, how to navigate through our new energy code, our new Hawaii home plans ready to be framed with steel, and the opportunities mid-rise construc-tion brings to steel framing.

Last but not least we provide

2010-2011 Officers & Board of Directors President: Tim Waite, Simpson Strong-Tie Co., Inc.Vice President: Colleen Mizuno, Maryl Group, Inc. Secretary: Patrick Gill, Sunrise Construction Treasurer (past president): Ralph Valentino, Hunt Building Co. Ltd.Immediate Past President: Scott Underwood, Brookfield Homes HawaiiDirector (past president): Akira Usami, Dietrich Metal FramingDirector: Kenneth Ancheta, Universal Builder LLCDirector (past president): Roberta “Bobbie” Kane, Bobbie Kane ResourcesDirector: Keith Oda, Actus Lend LeaseDirector: Robert Lee, Atlas Steel Corp.Director (past president): Doug Pearson, Castle & Cooke Homes Hawaii, Inc.Director: Julie Lee, Servco Raynor Overhead DoorsDirector (past president): Sam A. Galante, Steel Truss & Panel, LLC

The Hawaii Pacific Steel Framing Alliance (HSA) is a 501(c) (6) nonprofit organization established in May 1997 to encourage and promote the widespread, practical and economic use of cold-formed steel framing for residential and light commercial construction in the Pacific Rim. Seeing steel framing as an enduring building medium for the world’s housing needs, the HSA strives to be the preeminent worldwide steel framing resource for developers,

contractors, engineers, architects, building officials, suppliers, and the homebuyer. The HSA has regular membership meetings and provides educational opportunities and training for its members. Hawaii Pacific Steel Framing Alliance, Inc. & Cold-Formed Steel Engineers Institute – Hawaii Chapter P.O. BOX 2880 Aiea, Hawaii 96701 Ph: 808-728-7142 • Fx: 808-356-0396 Mardie C. Torres, Executive Director [email protected]

Everything you need, when you need it!

OAHU2276 Pahounui Drive Honolulu, HI 96819

BIG ISLAND73-4278 Hulikoa DriveKailua-Kona, HI 96740

Ph: 841.5819 · Fx: 842.0658 Toll Free: 800/201.5819

➤ StEEl ➤ Drywall ➤ acouSticS ➤ PlaStEring ➤ inSulation ➤ DEwalt toolS ➤ watErProofing ➤ 3m firEProofing

➤ concrEtE rEStoration ➤ SimPSon tiES & anchorS

Proudly Serving the State of Hawaii Since 1969

44-181-5 Laha Street Kaneohe, HI 96744Phone: (808) 247-2231 s Fax: (808) 247-2231 s Cell: (808) 351-4105

e-mail: [email protected]

Steel Truss & Panel, LLC

Building Steel truSSeS and PanelS in Hawaii Since 1980

call Sam galante for your eStimate today!

Page 3: 2010-2011 HSA Resource Guide

4 | 2010 Hawaii Pacific Steel alliance reSource directory Hawaii Pacific Steel alliance reSource directory 2010 | 5

Building in Steel: A Home Planning GuideYou too can enjoy the benefits of owning a steel

home! Building a predesigned steel-framed home on your lot is easier if it is a home plan with which design professionals, builders and framers are familiar!

The Hawaii Pacific Steel Framing Alliance (HSA) offers plans for sale to its members to make building a steel home easier. The HSA is a nonprofit organization made up of people like you: owners, architects, engineers, contrac-tors, builders and suppliers. Anyone can join! Choose any of the three plans and have a design professional modify it to suit your needs and your site and build it in steel!

1. Selecting a Plan for Your Lot The Plans: To build a steel-framed home from the

Members Design Portfolio, begin with a “study set” and this directory. Use these to decide if the home meets your needs and will fit on your lot. You may also purchase a “complete set” of architectural plans which cost $950 - $1,700 from the HSA. This will include full-scale drawings (blueprints) for a slab-on-grade home including: dimensioned floor plans, exterior elevations, optional front elevation, roof plans, window and door schedules, interior elevations and a title page for your site map. The complete set does not include a “professional stamp” or structural engineering. Structural design will be based on your site and input from the builder. The plans are copyright protected.

Home Plans – Ready to Go!The demand for cold-formed steel has grown because

building codes specifications for non-combustible materials around the country are on the rise — and steel does not burn or contribute fuel to a fire. Building codes now permit steel framing to be used in structures taller than the four-story height limit. We anticipate that a lot of builders will use steel framing for mid-rise projects (such as condominiums, apartments, office buildings or dormitories) as it enables them to build taller projects faster than they can with other materials

Onward and Upward!

THAT MEANS YOU CAN GET THE BEST OF BOTH WORLDS FROM ONE COMPANY.

The “set-it and forget-it” dimpled assembly that made UltraSTEEL® the system that revolutionized the industry.Or the “smooth” surface of ProSTUD™ that allows your crews to build assemblies and slide them into place.

UltraSTEEL®

Dimpled surfaceallows studs totightly grip track.“Set-it and forget-it”

ProSTUDTM

“Flat” flange profileallows or quickadjustmentsin the track

For more information go to www.dietrichmetalframing.com, or contact your local sales representative.

Products manufactured using the UltraSTEEL® process are protected by granted USA Patents (Nos. 6183879 and 5689990) and granted Canadian Patent (No. 2149914/1993) together with design registration. UltraSTEEL® is a Trademark of Hadley Industries plc.

10687 More Choices Ad 1_2.qxd:Layout 1 7/15/10 11:26 AM Page 1

2. Selecting an Architect or an Engineer Design Process: Hire a design professional to adapt

the house to your lot and complete the structural design. Before you hire your engineer and architect, you can check the CFSEI member list on page 14. Talk to member builders and framers to learn more about building in steel and what products they use. Some engineers have preferences that you can discuss with your builder. There is more than one way to build any home. Ask about the different types of cold-formed steel designs and the costs and benefits of each. After your engineer has finished the structural design and stamped the plans, apply for a permit.

3. Selecting a Builder Builders and Framers: We recommend you interview

more than one builder and get at least three qualified estimates with product specifications. Ask to have it framed in steel! A steel-framed home requires technical skills and experience. When built correctly it is extremely strong and durable. Call the Department of Commerce and Consumer Affairs at (808) 587-3222, ext. 1 to ensure you hire a licensed contractor in good standing. Check the HPSFA member list on page 12. Make sure your builder has experience, a good reputation and is financially capable. Require a Performance and Completion Bond.

4. Selecting Building Materials and Specifications Resources and Building Materials: Many member

builders, design professionals and suppliers will provide package pricing. Use this directory to find “partici-pating members,” look for the (house) symbol in the following pages. As part of the final process, you should approve the material specifications and have them listed in the construction contract documents provided by the architect or builder. Ask your builder to provide you with a package price and listing of the products. We recommend using quality name brands and reliable island distributors, including the sponsors listed below! BUILD IT IN STEEL!

Sponsors:Gold SponsorsGW Killebrew | James Hardie Sidings Products

Silver SponsorsRSI Building & Roofing Supply

Bronze Sponsors

CEMCO | Certainteed | Dietrich Metal FramingGrabber Construction Products | HONBLUE Milgard Windows & Doors | Pacific Source, Inc.Servco Home & Appliance DistributionServco Raynor Overhead DoorsSimpson Strong-Tie

while offering other opportuni-ties to increase their bottom lines as well, including lower construc-tion costs, faster construction cycles and lower insurance premiums.

While the traditional way of building these structures in the past have mostly been made out of masonry, two recent projects in Hawaii have already been built using cold-formed steel. The Colony at the Peninsula and the Princeville Starwood Property were constructed using load bearing steel framing. The HSA is actively assisting developers, engineers, architects and framers on mid-rise CFS design and construction practices, including reduced builders risk insurance and increased floor space due to fire ratings. It is anticipated that the rail project will foster the develop-ment of many mid-rise structures at the stations along its route. The HSA is planning to put together in the next few months a forum with experts who are already engaged in the design and construction of mid-rise CFS structures to help assist engineers and contractors in Hawaii on this type of noncombustible construction.

copyright

Phone (808) 262-8626Fax (808) 262-8429

Lic.# BC-10638

Kahiwelo project

Page 4: 2010-2011 HSA Resource Guide

6 | 2010 Hawaii Pacific Steel alliance reSource directory

Energy Code Brings Challenges, Opportunities

MAC 175 Standing Seam MAC 175 Standing Seam

Mahalo Hawaii!

MAC 150C Curved Metal Panels

Metal RoofingCool and Sustainable•Hawaii’sbest performingMetalRoofs

•ULTRA-Cool®heatreflectivecoatingcreatesanEnergyEfficient“Cool”Roofthat’sdurable,addsvaluetoanyprojectandcomplieswithLEEDandENERGYSTARStandards

•ManufacturedinHawaii•Statewidedelivery

Superior Long-Term Corrosion Protection

Hot-Dip Galvanizing

Hawaii’s Largest Steel Distributor

Steel Service Center

Oahu (808) 682-3000Neighbor Islands (800) 352-3920

[email protected] • www.macsteelusa.com/hawaii

Serving the Islands since 1959

In October 2009, the Hawaii Building Code Council of the state Department of Accounting & General Services approved the International Energy Conservation Code (IECC) 2006 as the statewide energy code and it became law on Nov. 28.

“Currently, the state is going through the process of adopting the 2009 edition,” says Mark Nowak,

president of the national Steel Framing Alliance, who conducted a seminar for the HSA discussing “Thermal Design, Energy Codes and Cold-Formed Steel Framing.” Though not all states in the nation have a mandatory energy code, adds Nowak, “If a state has accepted ARRA federal funds, (it) has agreed to adopt the 2009 IECC as a minimum energy code. This is what is driving Hawaii to adopt it.”

While the overall goal of the 2009 code is to reduce the impact of the built environment on the natural environment, and especially in Hawaii, to reduce the state’s dependence on oil, the code’s more stringent regulations also present new challenges to the growing local cold-formed steel (CFS) framing industry. Practically, this means constructing a tighter building

to reduce the size and use of air conditioning. And ideally, any measures used to increase energy efficiency should have a payback of no more than five years, according to Howard Wiig, institutional energy analyst for the Department of Business, Economic Development & Tourism (DBEDT).

“The ability to conduct a whole building simulation and determine

the most cost-effective way to meet the code has been substantially diluted in the 2009 IECC,” says Nowak. “The code no longer allows one to consider the impact of higher efficiency cooling, heating, or water heating equipment and its effect on the energy use in the building. This basically forces the builder using steel to comply with some very restrictive and expensive prescriptive require-ments that mandate costly exterior foam insulation on the outside of walls (in addition to the regular insulation in the wall cavity).”

These measures can add anywhere from $1.50 up to $3 per square foot to the cost of a home but does not add significantly to energy savings. “One of the energy consultants in attendance at (a) state energy code committee

meeting in June stated that this is a $5,000 added cost to a new home,” adds Nowak. “Our analysis shows the exterior insulation has a payback of around 50 years as opposed to the more normal payback of five to 10 years used in code decisions in the past.”

On the bright side, Nowak says there is more than one way to comply with the IECC: three options under what is known as the prescriptive path — R-value minimum, U-factor minimum and total UA alternative — as well as the performance path. “The R-value prescriptive path is convenient and easy to follow but definitely requires foam insulation on CFS walls. The U-factor approach is most useful for nonconventional building assemblies,” explains Nowak. “The UA alternative and performance path offers greater flexibility and, as a result, significant benefits in construction costs but require more upfront effort and expense.”

Nowak also advises the industry to look beyond the immediate impact of the IECC and focus on the opportunities it opens. Essentially, the code only considers each component of a building envelope in and of itself. “The opportunity is there for someone to step up and take control of the entire building design versus the current and past approach of everyone just looking at their own product or component. Under the newer codes, there is a relationship between framing type, cooling system design, insulation, siding attachment, and other components of the home. Yet no one is looking at the building design from a perspective of how steel framing interacts with the rest of the building. If the steel industry par-ticipants (manufacturers or framers) don’t step up and take on this role, someone else will who may not be as knowledgeable of our product and its benefits.”

It’s a call to action that would be difficult to ignore.

BY JUDITH SHINSATO

From left: Tim Waite, HSA president; Mark Nowak, Steel Framing Alliance president; Mike Moore, senior energy engineer for Newport Ventures, Inc.; and Howard Wiig, institutional energy analyst for the DBEDT — Nowak, Moore and Wiig were featured speakers at HSA’s June 9 seminar on the energy code.

Page 5: 2010-2011 HSA Resource Guide

8 | 2010 Hawaii Pacific Steel alliance reSource directory Hawaii Pacific Steel alliance reSource directory 2010 | 9

Sustainability Standards• Steel is the most recycled product in the world, 83

million tons of steel scrap were recycled in 2007: more than paper, aluminum, glass, and plastic combined. (See Steel Recycling Institute: www.recycle-steel.org - Earn Steel Recycled Content Credit).

• Steel recycling programs reduce the solid waste stream, resulting in saved landfill space, and help to conserve our natural resources.

• Steel is recognized as a green building material in the National Green Building Standard, (ICC-700), ASHRAE 189.1, Green Globes and other rating systems such as Leadership in Energy and Environmental Design (LEED).

• The use of steel building products enables builders and designers to comply and often exceed the requirements of the various standards and programs. To learn more about steel’s role in green building visit: www.steelframing.org.

Environmentally Responsible• Every piece of steel manufactured contains recycled

steel, it is required in the steel making process and all steel is 100 percent recyclable. From the car to the grill to the kitchen sink, steel can be melted down again and again without losing its quality. Steel scrap is our largest raw material by tonnage.

• The average landfill consists of approximately 60 percent construction debris, mostly concrete, wood and plastic. By using CFS builders can reduce their disposal costs and divert material from local landfills.

• Debris from a steel-framed house accounts for only 2 cubic feet of landfill waste compared to 50 cubic feet from traditional home construction.

• Using steel takes the pressure off of other resources: a typical 2,000-square-foot home requires about 40 to 50 trees, about an acre’s worth. With steel, only the equivalent of about six scrapped automobiles are needed.

Strong, Straight, and Durable• Steel framing has the highest strength-to-weight ratio

of any building material.

Why Steel’s the Deal

Steel framing has become the standard for home building in Hawaii where thousands of steel-framed homes have been built. Homeowners in Hawaii expect their new houses to be framed out of steel. Hawaii is the leader in CFS technology with the highest percentage of homes being framed with this durable product. People from around the world still come to see steel framing here in Hawaii. Here are just some of the reasons:

• Steel is roll-formed into precise, uniform shapes with exacting tolerances.

• The sections are straight and do not require sorting or special handling to ensure for crown. No planing of studs is required.

• Steel does not shrink or expand when subjected to moisture changes caused by preservative treatments, rain, or changes in humidity.

• Steel does not rot, warp, split, crack, or creep. Using steel framing virtually eliminates nail pops and drywall cracking.

• Steel satisfies Hawaii standards for termite resistant construction that were developed in the 1980s.

• Steel framing provides a termite proof structural solution and minimizes the need for costly termiti-cides, tenting and extra costly treatments.

Advantages of Steel • Steel provides the possibility for large spans and open

spaces. CFS trusses can span up to 60 feet or more. • Steel harmonizes with all materials, made to the same

shapes and sizes as traditional stick framing. • Steel is noncombustible, making it an attractive

building material in commercial and residential construction. This also makes it ideal for applications in areas that are prone to wildfires. In addition, steel’s fire resistance can help slow the spread of fire within a building.

• CFS structures qualify for lower insurance rates. Visit www.steelframing.org to learn more.

• Steel is galvanized, protecting the members from corrosion. In order for galvanized steel to rust there must be a constant supply of water. As with all framing materials, structures must be protected from water intrusion to prevent mold, mildew, and rot.

• Steel framing members in wall cavities, attic spaces, or crawl spaces that are not exposed to water will last over 100 years.

• Zinc coating protects steel by providing a physical barrier as well as cathodic protection to the underlying steel. When the base steel is exposed, such as at a cut or scratch, the steel is cathodically protected by the sacrificial corrosion of the zinc coating adjacent to the steel.

Steel Myths• Steel-framed houses do not attract lightning strikes.

Steel high rises in Honolulu have provided occupants with safe offices and residences for years.

• A steel-framed home can be engineered for the highest wind and seismic rating given by code.

• Steel-framed houses are fire resistant and non-com-bustible, making it an attractive material especially in the commercial building industry, and qualifying steel for lower insurance rates.

• Studs, joists, and rafters do not add fuel to a fire (1/3 of all fires start in the wall cavity).

• Steel-framed houses do not “melt” in a fire. Framing members can resist up to 1,800 degrees Fahrenheit.

• Steel framing can be used for additions and renova-tions for existing wood houses, especially those with termite damage. Screwed connections make it easy to move walls and for other renovations in the future.

Steel is Healthy• The Healthy House Institute and American Lung

Association recommend steel framing for good indoor air quality.

• Chemically sensitive homeowners and those suscep-tible to asthma are exposed to fewer chemicals in steel-framed homes.

• Steel resists mold spores that can lead to chronic illness.

Dedicated to preserving the precious land and natural resources unique to Hawaii, Lenox Metals has been recycling metal products

statewide since 1989.

Hawaii’s choice for recycling metals statewide.

808-682-5539www.lenoxmetals.com

91-185 Kalaeloa Blvd., Campbell Industrial Park

LENOX METALS, LLC

2265 Hoonee Place, Suite 150 808.853-2310/Fax:808.853-2079Email Technical Support: [email protected]

Email Estimates: [email protected]

Page 6: 2010-2011 HSA Resource Guide

10 | 2010 Hawaii Pacific Steel alliance reSource directory Hawaii Pacific Steel alliance reSource directory 2010 | 11

Formosan Subterranean Termites cost Hawaii residents about $100 million a year1. Across the U.S., estimates place the damage from termites at over $5B/year. Due to its size and aggressive foraging behavior, a colony of Formosan termites does more damage than single colonies of other U.S. subter-ranean species, and can cause significant structural damage to a home in only six months.

They are known to enter buildings through cracks in concrete flooring or travel under tile flooring through gaps less than 1⁄16” wide2. They have also been known to eat their way through concrete, bricks or mortar to reach wood, chewing through many other materials, including insulation around underground electrical lines causing power outages. FSTs can eat through thin sheets of metal, mortar, PVC pipe, electric power

The Terrible Termites

1. In 1990, annual figures for prevention, control, and repair were conservatively estimated at $60 million. By 1996, that figure had grown to over $100 million per year. www2.hawaii.edu/~entomol/guide/guide_introduction.htm.

2. Formosan Subterranean Termites. January 1995. A Consumer Guide to Termites and Termite Control. http://www.termite.com/termites/eastern-subterranean-termite.html

3. Southern Forest Products Association. Pressure-Treated Southern Pine Takes the Bite out of Formosan Termites. http://www.southernpine.com/termiteinfo.shtml

4. Yates, Julia R. and Tamashiro, M. The Formosan Subterranean Termite in Hawaii. Publication No. HSP-2, Cooperative Extension Service, College of Tropical Agriculture and Human Resources (CTAHR) University of Hawaii at Manoa, Honolulu, Hawaii, February, 1999. http://www2.hawaii.edu/~entomol/pdf_files/hsp-2.pdf

5. Grace, J. K., R. J. Woodrow, and J. R. Yates. 2002. Distribution and management of termites in Hawaii. Sociobiology 40: 87-93.

6. Woodrow, R. J. Grace J. K., and Yates III, J. R.. 1999.Hawaii’s Termites – An Identification Guide. Publication No. HSP-1, Cooperative Extension Service, College of Tropical Agriculture and Human Resources (CTAHR), University of Hawaii at Manoa, Honolulu, Hawaii, February 1999. P. 1.

7. This particular case happened in Halawa area near Aiea.

(from Treated Wood Use in Hawaii, December 2009)

and telecommunication lines and most woods, including hardwoods, paint, plaster, gypsum board, and even CMU block in order to get to a food source. A typical colony will consume over 1,000 pounds of wood per year3.

Unpredictable invasiveness of ground termites makes them difficult to detect and control4.

The termite is ‘hidden from view’ at all times. The presence of termites may be indicated by: a sagging door or floor, leaks in the roof, a warped wall, a hollow sounding beam, discolored or blistered paint, depressions in wood, moisture collecting in unusual places, springy floors or steps, mud tubes on interior or exterior walls, wood rot, interruptions in power or communications like short circuits, telecommunication blackouts, or similar problems. By the time termites are detected, considerable

damage has already been done to the structure.

FSTs can travel from below ground to a suitable food source as high as the third story attic space, and higher5. Formosan termites can establish secondary colonies in very moist wood of upper stories of buildings (even several stories above ground) and do not need soil contact if there is a nearly constant moisture source. This is particularly prevalent in areas of high humidity where wood moisture is above average. Leaking roofs or plumbing fixtures are common water sources for such “aerial” colonies6.

It has been documented where a mud tube was built from the wood floor, up over 12” into the air to reach a water source: water in a waterbed. The termites actually reached the wood frame of the bed and ate through the wood to get to the water source. The discovery was made only after the bed leaked7. Ground termites eat mainly the springwood (softer wood) of susceptible timbers, most often leaving the summer wood (harder wood) sections. This can be easily seen when a damaged timber is cut open for inspection.

Trees serve as gateways for termites to enter a house. Termites constantly search for food sources, which include trees. There are a number of cases in Hawaii where live plants and trees have been attacked by termites. Termites infest the center of a tree but do not break through the bark. They eat right up to the outer rim of the tree. The tree can be weakened considerably so that when a strong wind comes along it can fall over. The danger in having an infested tree

in the yard is that ground termites can travel through the roots. If the roots go under the foundation of the house it is a subway that can lead them into the house, where the structural wood becomes food. Because they travel inside the root and are afforded its protection they can be very difficult to control or detect. Among the termite favorites are papaya, sweet corn, mango, avocado, various citrus, Norfolk pine, and eucalyptus. Most houses built in the 80s were constructed on agri-cultural lands that had been infested previously by termites.

In Hawaii, when a home is found by pest control companies to be infested with Drywood termites (not yet with subterranean termites), that usually means tenting the home. Tenting a home is a process where the house is covered with a tent or tarp. Gas is pumped into the home and left alone for at least 24 hours to kill the termites. The gas is then released from the home and inspectors come in to measure the gas in the air to make sure it is safe to re-enter the home. House tenting is costly. The occupants must vacate the home for 2-3 days including all pets. An increase in house break-ins has been observed the past few years as the tenting provides an open invitation to vandals that the homeowner is not present. This is not a practice commonly used with subterranean termites.

Precision Truss LLC is committed to serving Hawaii’s building industry. We take great pride in consistently manufacturing a quality product and providing personalized service and prompt dependable delivery.

At Precision Truss customer satis-faction is top priority!

• Residential, Industrial, Commercial

• Plate Line Up Roof Truss Package

• Statewide Services

• Locally Owned & Operated

• Certified Truss Manufacturer

91-227 Hanua St. (Campbell Industrial Park) – Kapolei, HI 96707

(808) 690-1222 fax (808) 690-1322www.precisiontrusshawaii.com

Call us at PRECISION! 690-1222

Page 7: 2010-2011 HSA Resource Guide

12 | 2010 Hawaii Pacific Steel alliance reSource directory Hawaii Pacific Steel alliance reSource directory 2010 | 13

Universal Builder LLCKen AnchetaPH: (808) 478-1973FX: (808) [email protected]

SPECIALTY CONTRACTORS

Alaka’i Mechanical CorporationClark MorganPH: (808) 834-1085FX: (808) 834-1800 [email protected]

Lewis & Mann Plastering and Drywall, Inc.Terry MannPH: (808) 632-0880FX: (808) [email protected]

ENGINEERS

CKD, Inc.Chang KimPH: (808) 988-9442FX: (808) [email protected]

Consulting Structural Hawaii, Inc.Gary SuzukiDipankar SenguptaPH: (808) 945-0198FX: (808) [email protected]@consultingstructuralhawaii.comwww.consultingstructuralhawaii.com

Dennis K. Hanatani, Inc.Dennis HanataniPH: (808) 737-9488FX: (808) [email protected]

Engineering Design Group, Inc.Michael KasamotoPH: (808) 589-1170FX: (808) [email protected]

Hawaii Engineering GroupAther Rashid Dar, P.E.PH: (808) 533-2092FX: (808) [email protected]

James B. Walfish - Consulting Structural EngineerJames WalfishPH: (808) 737-0141FX: (808) [email protected]

Libbey Heywood, Inc.Annette Wong, P.E. PH: (808) 531-4527FX: (808) [email protected]

Lenox Metals, LLCAlan HornsteinPH: (808) 682-5539FX: (808) [email protected]

Milgard Manufacturing, Inc

Jeff Mira Sr. PH: (808) 645-0596FX: (808) [email protected]

Schnitzer Steel Hawaii Corporation James C. BaniganRene M. ManshoPH: (808) 682-5810 FX: (808) 682-0604 [email protected] www.schnitzersteel.com

Servco Raynor Overhead DoorsJulie LeePH: (808) 676-3667FX: (808) [email protected]

Termimesh Hawaii, Inc.Sandra SardinhaPH: (808) 843-1968FX: (808) [email protected]

Western Overhead Door Co.

Eric CarlbomPH: (808) 832-0555 FX: (808) 848-1694 [email protected]

BONDING

Pacific Source, Inc.Doug MartinPH: (888) 343-1515 FX: (800) [email protected]

UNIONS

Hawaii Carpenters Union, Local 745Sean NewcampPH: (808) 847-5761FX: (808) [email protected] www.hawaiicarpentersunion.com

Green Builders DepotMichael ReevesKat BarajasPH: (808) 839-9700FX: (808) 626-5478greenbuildersdepot@hawaiiantel.netwww.greenbuildersdepotintl.com

Guam Hardwood Construction Supply Inc.Rene OngPH: (671) 649-8801FX: (671) [email protected]

Mid Pacific Steel, Inc.Irving HirataPH: (808) 839-0606FX: (808) [email protected]

RME Construction SupplyTony McComasPH: (808) 877-7558FX: (808) 871-5679

RSI Roofing & Building Supply

Scott MaddenPH: (808) 847-2077FX: (808) [email protected]

Titan Fastening SystemLance EspindaPam Tanimura WeaverPH: (808) 520-4125/221-0902FX: (808) [email protected]@titanfastening.comwww.titanfastening.com

METAL ROOFING PRODUCERS

Macsteel Service Centers USADiane MalinovichPH: (808) 682-3000FX: (808) [email protected]

MANUFACTURERS’ REPRESENTATIVES

Bobbie Kane ResourcesRoberta “Bobbie” KanePH: (808) 388-1188FX: (808) [email protected]

Certainteed CorporationStan MorenoPH: (925) [email protected]

James Hardie Building Products

David Fukumoto PH: (808) 783-4975FX: (808) [email protected]

ASSOCIATES

Dependable Hawaiian ExpressWilliam (Bill) LaneKeith SasakiPH: (808) 792-8818FX: (808) [email protected]@dhx.comwww.dhx.com

HONBLUELee J. HopkinsonShannon HinesPH: (808) 441-4301FX: (808) [email protected] [email protected]

Matson Navigation Company

Dorothy CooperPH: (808) 848-1371FX: (808) [email protected]

Trade Publishing CompanyBarry RedmaynePH: (808) 848-0711FX: (808) [email protected]

APPLIANCE DISTRIBUTORS/SUPPLIERS

Servco Home & Appliance DistributionLisa Yamaguchi PH: (808) 564-2430 Showroom: (808) [email protected]/appliance.php

BUILDING MATERIAL DISTRIBUTORS/SUPPLIERS

G.W. Killebrew Co., Inc.Tim TakaezuBob SpanglerPH: (808) 841-5819FX: (808) [email protected]@gwkillebrew.comwww.gwkillebrew.comKailua-Kona: Reed BenderPH: (808) 327-2173FX: (808) 327-2177

Grabber Construction ProductsJack KrollArt PaynePH: (808) 836-1161 FX: (808) [email protected]@jwahome.comwww.grabberman.comKailua-Kona:Gene Waldrep PH: (808) 329-5110 [email protected]

Medford Enterprises, Inc.Dutch MedfordPH: (808) 245-7927FX: (808) [email protected]

TDL Drywall, Inc.Neal Pollock PH: (403) 212-0944FX: (403) [email protected]

Tsuchiya Twoby Home Co., Ltd.Hiroyuki MutoPH: 011-717-2400 FX: [email protected]

Unlimited Construction Services, Inc.Randy FinlayPH: (808) 241-1400FX: (808) 245-6611unlimited@unlimitedhawaii.comwww.unlimitedconstructionservices.com

Unifab Industries, Inc.Joe BolanPH: (808) 853-2310 Ext. 206FX: (808) [email protected]

FRAMING CONTRACTORS

Kealoha ConstructionAlden KealohaGeorge Kealoha PH: (808) 249-0919FX: (808) 249-0918george@kealohaconstruction.comwww.kealohaconstruction.com

Shioi Construction, Inc.Mike GoodnightPH: (808) 246-1700FX: (808) [email protected]

Sunrise Construction, Inc.Marcus GillespiePat GillPH: (808) 262-8626FX: (808) [email protected]@sunrise-const.comwww.sunrise-const.com

Steelframe Home Builders LLCRod SaragozaKiha PimentalPH: (808) 845-3196FX: (808) [email protected]

Castle & Cooke Homes Hawaii, Inc.Doug PearsonPH: (808) 626-3608FX: (808) [email protected]

D.R. Horton - Schuler DivisionAlan LabbePH: (808) 521-5661FX: (866) [email protected]

DMA/Development LLCChuck HeitzmanPH: (808) 591-1098FX: (808) [email protected]

Group Builders, Inc.Lito AlcantraJoey AlcantraPH: (808) 832-0888FX: (808) [email protected]

Haseko Construction, Inc.Adam SuttonPH: (808) 689-7772 Ext. 222FX: (808) [email protected]

Hawaiian Dredging Construction Co.Paul SilenPH: (808) 735-3203FX: (808) [email protected]

Hawaii Partition Systems, Inc.

Michael AkiPH: (808) 332-9119FX: (808) [email protected]

Hunt Building Company LimitedBud WatersRalph ValentinoPH: (808) 499-3137FX: (808) [email protected]@HuntCompanies.comwww.huntcompanies.com

IPR, Inc.Jon GrindlePH: (808) 479-6885FX: (808) [email protected]

Maryl Group Inc.Colleen MizunoNorm WoodPH: (808) 545-2920FX: (808) [email protected]@maryl.comwww.maryl.com

Steel Truss & Panel, LLC.Sam GalantePH: (808) 351-4105FX: (808) [email protected]

GENERAL CONTRACTORS /BUILDER OWNERS/DEVELOPERS/FABRICATORS

Actus Lend LeaseKeith OdaPH: (808) 748-8279FX: (808) [email protected] www.ActusLendLease.com

Brookfield Homes HawaiiScott UnderwoodPH: (808) 676-3300 FX: (808) [email protected]

CC Engineering & Construction, Inc.John CheungPH: (808) 848-2032FX: (808) [email protected]

TOOL, FASTENER, CONNECTOR & ACCESSORY MANUFACTURERS

Dewalt Industrial Tool Co.Jeremy AdkinsPH: (808) 842-9925FX: (808) [email protected]

Simpson Strong-Tie Co., Inc.

Tim WaitePH: (808) 479-1216FX: (808) [email protected]

PRE-ENGINEERED PANELIZED SYSTEMS / TRUSSES COMPONENT & SYSTEM

Pacific Panel & Steel Truss, Inc.

Dena DerrPH: (808) 990-5690FX: (866) [email protected]

STEEL STUD MANUFACTURERS

Atlas Steel CorporationS. Robert LeePH: (808) 841-6111FX: (808) [email protected]

CEMCOTom PorterCraig BaldwinPH: (800) 775-2362PH: (808) 927-2424 FX: (626) [email protected]@cemcosteel.comwww.cemcosteel.com

Dietrich Metal FramingGeorge Proctor Akira UsamiPH: (808) 682-5747FX: (808) [email protected]@dietrichindustries.comwww.dietrichindustries.com

HAWAII PACIFIC STEEL FRAMING ALLIANCEMember Directory (2010/2011)

Steel Stud Manufacturers: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Tool, Fastener, Connector & Accessory Manufacturers: . . . . . . . . . . . . . . . . . .12

Pre-Engineered/Panelized System and Truss Fabricators: . . . . . . . . . . . . . . . . .12

General Contractors/Builders/Developers: . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Framing Contractors: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Specialty Contractors: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Engineers: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Architects and Other Design Professionals: . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Associates: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Appliance Distributors/Suppliers: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Building Material Distributors/Suppliers: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Metal Roofing Producers: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Manufacturers’ Representatives: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Bonding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Unions: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

CFSEI Members: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

For the latest roster check out www.hawaiisteel.comThe listing in this roster represents the membership of the Hawaii Pacific Steel Framing Alliance at publication. No attempt has been made to verify the qualifications of those listed or to secure independent references. The Hawaii Pacific Steel Framing Alliance does not, and will not recommend any particular member listed herein. Anyone looking for the services of our members should exercise common business practices in checking references and business credentials of any member. (List as of June 30, 2010)

Hawaii Pacific Steel Framing Alliance (HPSFA) Members

Hawaii Pacific Steel Framing Alliance (HPSFA) MembersPlan Portfolio Participant Works on Neighbor Islands

Martin & Chock Inc.Lyle CardenPH: (808) 521-4513FX: (808) [email protected]

Miyasato Kuniyoshi Engineers LLCSusan KuniyoshiPH: (808) 488-7579 Ext. 2FX: (808) [email protected]

NAVFAC HI, OPHCI42Albert J. Fobel, P.E.PH: (808) 474-3838FX: (808) [email protected]

Sato & Associates, Inc.Dean DoiPH: (808) 955-4441FX: (808) [email protected]

Shigemura, Lau, Sakanashi, Higuchi and Associates, Inc.Howard LauPH: (808) 942-9100FX: (808) [email protected]

Structural Analysis Group, Inc.Leslie NagataPH: (808) 593-0951FX: (808) [email protected]

Tanimura & Associates, Inc.Adrian LeePH: (808) 536-7692FX: (808) [email protected]

ARCHITECTS

Architechnology, Inc.Jo Paul RognstadPH: (808) 955-6677FX: (808) [email protected]

CADD Services HawaiiJohn Yonemori-AntalPH: (808) 389-8183FX: (808) [email protected]

Charles H. Palumbo, Architect Inc.PH: (808) 342-7443FX: (808) 377-8877 [email protected]

Richard Matsunaga & Associates ArchitectsHerb LeongPH: (808) 591-1818FX: (808) [email protected]

Page 8: 2010-2011 HSA Resource Guide

14 | 2010 Hawaii Pacific Steel alliance reSource directory

© 2010 Simpson Strong-Tie Company Inc. CFS10-HI

Our steel for your steel.

Steel buildings offer many advantages; they’re durable, termite-resistant and recyclable – in fact, steel is the most recycled material in the world. Simpson Strong-Tie introduces several innovative products for cold-formed steel that offer their own unique benefi ts. Our new HTT4 and HTT5 tension ties provide higher loads, install with #10 screws and meet the new code standards. Our new high-strength LCE4 column cap installs on the left or right side and eliminates the needs for lefts and rights. And our S/HJCT joist hanger has a higher load capacity, allowing joists to be attached from either side or doubled up.

To learn more about these and other new products, visit www.strongtie.com/cfs and download our 2010 Cold-Formed Steel Connectors catalog. To speak with a Simpson Strong-Tie representative in Hawaii, dial (808) 479-1216.

S/HJCTHTT4 and HTT5 LCE4

� e Steel Strong-Wall® shearwalls (shown above) provide high-capacity, narrow wall solutions and install easily in cold-formed steel framing.

4D Designs LLCTonya DalePH: (808) [email protected]

Alpine Engineered Products Inc. - TrusSteel Div.Kent M. BiceJohan CronjeDave DunbarDave GoodwinRobert H. KeimAlan ParrisSowri Rajan, P.E.Steve StrouseRussell Tangren, P.E.Tim WilkinsonPH: (863) 324-7269FX: (863) [email protected]@[email protected]@[email protected]@[email protected]@[email protected]@trussteel.netwww.trussteel.com

CKD, Inc.Chang Nai Kim, P.E.PH: (808) 988-9442FX: (808) [email protected]

Consulting Structural Hawaii, Inc.Ethan W. OkunaPH: (808) 945-0198eokuna@consultingstructuralhawaii.comwww.consultingstructuralhawaii.com

Creative Partition SystemsMike GoodnightPH: (808) 246-1700FX: (808) [email protected]

Dietrich Metal FramingAkira UsamiPH: (808) 682-5747FX: (808) [email protected]

Engineering Design Group, Inc.Michael K. KasamotoPH: (808) 589-1170FX: (808) [email protected]

Hawaii Partition Systems, Inc.Michael M. AkiPH: (808) 332-9119FX: (808) [email protected]

ITW / TrussSteelBob WarnerPH: (602) 418-2199FX: (866) [email protected]

ITW Building Components Group, Inc.William Babich, P.E.Brian Carron, P.E.Rob EllisJon HasemeierGary HealJulie LowreyTamil SamiappanJake Thompson, P.E.Clark VancilPH: (863) 422-8685FX: (863) [email protected]@[email protected]@[email protected]@[email protected]@[email protected]

James B. Walfish - Consulting Structural EngineerJames B. WalfishPH: (808) 737-0141FX: (808) [email protected]

KAI Hawaii, Inc.Timothy GoshiPH: (808) 533-2210FX: (808) [email protected]

Libbey-Heywood, Inc.Annette WongPH: (808) 531-4627FX: (808) [email protected]

Maryl Group Inc.Colleen M. MiyasatoNorm WoodBrandon LeongIran SakamotoPH: (808) 545-6460FX: (808) [email protected]@[email protected]@maryl.comwww.maryl.com

NAVFAC HIAlbert FobelPH: (808) 521-6958FX: (808) [email protected]/

Richard Matsunaga & Associates Architects, Inc.Herb Leong, AIAPH: (808) 591-1818FX: (808) [email protected]

S&G Construction, Inc.Darin OkudaPH: (808) 689-5400FX: (808) [email protected]

Sato & Associates, Inc.Dean DoiPH: (808) 955-4441FX: (808) [email protected]

Segawa & AssociatesWesley SegawaPH: (808) 935-4677FX: (808) [email protected]

Shigemura, Lau, Sakanashi, Higuchi and Associates, Inc.Howard K.C. Lau, P.E.Craig SakanashiKeene HanadaBeverly Ishii-NakayamaWayne K. HiguchiJason EmotoPH: (808) 942-9100FX: (808) [email protected]@[email protected]@[email protected]@lava.net

Simpson Strong-Tie Co., Inc.Tim Waite, P.E.PH: (808) 479-1216FX: (808) [email protected]

Structural Hawaii, Inc.Jeoffery CudiamatPH: (808) [email protected]

Tanimura & Associates, Inc.Adrian C.M. Lee, PEPH: (808) 536-7692FX: (808) [email protected]

Cold-Formed Steel Engineers Institute (CFSEI) Members

CFSEI...aiding engineers in the efficient structuraldesign of safe & cost effective cold-formed steelframed structures.

CFSEI provides unique access to numer-ous technical resources, publications andinformation keeping engineers up-to-dateon the latest news and trends in steelframing, and hosts educational andnetworking events.

Members receive FREE access to the full technical resources of theInstitute.

Join Today!

Access to the Members Only section of the CFSEI and SFA Web sites...filledwith vast resources and publications for easy download. Your name & company logo in the CFSEI & SFA “Find an Engineer” Directory.

Member Discounts on events and publications, and much more...

An Institute of thewww.CFSEI.org

CFSEI...aiding engineers in the efficient structuraldesign of safe & cost effective cold-formed steelframed structures.

CFSEI provides unique access to numer-ous technical resources, publications andinformation keeping engineers up-to-dateon the latest news and trends in steelframing, and hosts educational andnetworking events.

Members receive FREE access to the full technical resources of theInstitute.

Join Today!

Access to the Members Only section of the CFSEI and SFA Web sites...filledwith vast resources and publications for easy download. Your name & company logo in the CFSEI & SFA “Find an Engineer” Directory.

Member Discounts on events and publications, and much more...

An Institute of thewww.CFSEI.org

CFSEI… aiding engineers in the efficient structural design of safe and cost effective cold-formed steel framed structures.

CFSEI provides unique access to numerous technical resources, publications and information keeping engineers up-to-date on the latest news and trends in steel framing, also hosting educational and networking events.

Termimesh Hawaii, Inc.Sandra SardinhaPH: (808) 843-1968FX: (808) [email protected]

Wilson Okamoto CorporationMarvin MestanzaPH: (808) 946-2277FX: (808) [email protected]

Page 9: 2010-2011 HSA Resource Guide

Cemco proudly supports the Hawaii Steel Framing

Alliance and all of it’s distinguished members.

CEMCO’s product line includes SSMA Code Compliant steel framing products, Viperstud interior framing products, metal lath, a complete line of framing and plastering accessories pre-fabricated trusses, Sureboard for shear walls, Sure-Span floor framing system for mid-rise construction, ProX Header system, Fire Air and Sound (FAS) Fire management products for head-of-wall solutions, Dry-Trak, and exterior water management systems.

CEMCO provides all product submittals, material certification sheets, product data catalogs, CSI specifications, LEED request forms, typical details, industry links, and much, much more on our website at www.cemcosteel.com.

CEMCO owns Pacific Coast Truss Fabricators; a FULL-SERVICE steel truss design firm that engineers, details, pre-fabricates, and delivers right to the job site, finished TrusSteel® roof and floor trusses.

CEMCO ships to the Pacific Rim, Canada, Mexico, Central America, and several other international locations through our extensive dealer network.

CEMCO has several leadership positions in the industry’s most visible organizations such as the AISI, CFSEI, SSMA, and others.

CEMCO has a full-scale structural engineering and design division.

CEMCO’s products contribute to LEED point accumulation for recycled content, recyclability, regional materials, along with other potential criteria.

CEMCO’s Technical Services Department is fully staffed with engineers experienced in code requirements, LEED documentation, design and detailing, and is able to handle the toughest of questions from any architect, engineer, contractor, or dealer.

DID YOU KNOW...

WE WANT TO LET YOU KNOW, WE ARE MUCH MORE THAN A STEEL

MANUFACTURER.

WWW.CEMCOSTEEL.COM