Upload
engr-piagola
View
152
Download
1
Tags:
Embed Size (px)
Citation preview
Simple Solutions are the Best!
1-877-888-8727 www.OneEyeIndustries.com
Since 2004
Worldwide Distribution 2011A
1) Why is magne c ltra on a value? Quality magne c lters are capable of ltering to submicron levels without ow restric on and are reusable for 10+ years. The most damaging contaminant in engine lube, hydraulic uid, fuel and coolant is ferrous metal under 10 microns.
2) How do you collect non ferrous contamina on on a magne c lter? Through sta c adhesion caused by sta c charge build up with the high ow uids and or gases.
3) What types of magne c lters are there? The most common are ceramic and have been used to lter oil and uids for the past 50 years. The new magne c lters use rare earth magnets in the magne c lters.
4) What is the di erence between ceramic and rare earth magne c? Ceramics are low in magne c strength and will crack and disassemble when exposed to vibra on. They also lose their magne c eld strength when exposed to high heat. Exposed ceramic is also very hard to clean.
Rare earth magnets are 4 mes stronger than ceramic magnets and handle high heat without losing eld strength and are highly resistant to vibra on. They are coated and do not crack. They are installed in stainless steel tubes and retain their strength and clean very easily.
5) What are the advantages of OEI magne c lters? OEI magne c lters are manufactured with our patented design and are 12 mes stronger than ceramic magnet
lters and are encased in stainless steel tubes in a patented format that creates powerful projected radial elds that have larger surface area than tradi onal magne c lters rods.
6) How do you clean a magne c lter rod? The OEI magne c lter rod design has no magne c eld at the end thereby you slide the contamina on down to the end and it falls o .
7) What do you do with contamina on collected?It is recommended to have the trapped contamina on analyzed for wear debris iden ca on. The magne c lter
becomes a predic ve maintenance tool.
8) Can I purchase your product directly? We have distribu on in most loca ons around the world and if we do not cover your area, yes we will supply direct.
9) Custom designs? Yes we welcome custom designs.
10) What happens if you remove all the metal out of oil? Our magne c lters remove the ferrous and in many applica ons the non ferrous contamina on to submicron levels due to sta c adhesion but you will never remove all the metal as it is produced by moving metal parts, new oils and uids are contaminated with metal and air ingression contaminates the system with ne metal par cles under 10 microns. If you are tracking the contamina on levels through oil analysis and install magne c lters you will simply drop your bench mark levels much lower. The less hard metals results in less wear thereby extended component and uid/oil life.
11) How long do magne c lters last? OEI magne c lters have a 10+ year life.
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Padswww.OneEyeIndustries.com
F.A.Q.
Magnetic Filter CoresA novel approach to proactive maintenanceBy Christian Bauer, Pall Corporation and Roger Simonson, One Eye Industries
The generation of ferrous contaminants in most hydraulic and lube systems due
to both normal and abnormal wear is a fact of life. Knowing the amount and
type of wear particles in the fl uid system is paramount to avoiding unscheduled
outages. Standard fi lter elements will capture any type of particulate contami-
nation, ferrous and non-ferrous, within their media matrix according to their
micron rating. Identifi cation of the contamination captured typically requires
off-site laboratory analyses.
Built-in magnetic fi lter cores can capture ferrous contaminants in fl uid systems,
down to < 1 μm, before they reach the actual fi lter, thus providing an excel-
lent diagnostic tool for contamination monitoring and proactive maintenance.
Due to static adhesion, the cores can also retain some of the non-ferrous
contaminants. By simply removing the magnetic core and examining the
contamination retained on it under a microscope, reliability and maintenance
engineers across many industries now have a valuable tool for identifying
potential wear-related issues before they become a real problem.
Reusable Oil Filter Magnets
www.OneEyeIndustries.com
Mission Statement
To design and manufacture the most effective cost efficient filtration systems in the world and answer the challenges the industry presents.
To grow our company into an international supplier through strategic partnerships with quality companies who operate on a similar high level of integrity and commitment.
With a dedicated effort, increase the application of our filtration solutions to improve industry efficiency thereby reduce overall dependency on fossil fuels and a reduction of harmful emissions that result from our industrial revolution.
About Us
One Eye Industries Inc welcomes its 15th year in business. With 4 years of product development and entering our 11th year of sales, our product lines continue to grow to answer the demand and expanding customer base around the world in every industry.
We manufacture an extensive product line utilizing new magnet technology. Our filters work with and compliment existing filtration systems and or replace them with reusable stainless screen filters. Custom designs are welcome.
Industry has been reluctant to employ magnetic filtration due to years of exposure to ineffective design and limited magnetic ability. Recent technological advances in magnetic properties and manufacturing processes have resulted in smaller, stronger high tech magnets available that allow innovative new designs for filtration systems and dramatically improving traditional magnetic filtration.
Industry research states “Iron and Steel” particles under 10 microns in size are the most damaging contaminants in air compression, water, lubrication, hydraulic fluid, coolant and fuel systems. The rate at which contamination enters these systems is greatly underestimated and understated. Likewise, the effectiveness of traditional filters at removing metal contaminants is greatly overstated. Magnetic filtration has practical and beneficial applications for all industry: chemical processing, oil & gas refining, manufacturing, construction equipment, transportation, marine and pulp & paper.
Our first line: reusable magnetic filters that compliment and work with existing disposable filters. They attach to the outer skin, extract and trap contaminants to the interior filter skin.
Our second line: magnetic rods and scrubber filters install in-tank, or inline. They offer maximum filtration, no bypassing with minimal flow restriction, low & high- pressure applications with ten plus years of service.
Our third line: the ADD-Vantage 9000 series are heavy-duty reusable stainless screen filters equipped with an internal magnetic filter and an internal fail-safe by-pass. When the bypass is activated the fluid is still filtered by the magnetic filter. They are environmentally friendly with ten plus years of service.
All our products offer long life, are user friendly, easily cleaned, reusable and maintained with minimal effort and cost. Cleaner fuel and lubricants for all applications in industry will result in reduced maintenance costs and increased productivity. This will reduce the demand on industry to produce and use more energy that results in increased emissions.
R.M. Simonson
Founder, President & CEO
Table of Contents
1
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
1000 SeriesReusable Magnetic Filter Pads
3 sizes available for oil, fuel, transmission and hydraulic disposable spin-on filters
Page 2 - 3
www.OneEyeIndustries.com
One Eye Industries Inc. assures:• Consistent Quality (ISO 9000)• Leading Technical Innovation• Premier Customer Service
OEI manufactures environmentally friendly filtration systems with proprietary magnetic technology. Reusable long life filters that allow extended maintenance schedules, increased fluid and equipment component life.
From Consumer to IndustrialOEI provides solutions to retail consumers and to industrial users in the Oil & Gas, Marine, Manufacturing, Mining and associated industries to effectively filter and remove ferrous and nonferrous contamination in lube oil, hydraulic fluid, fuel, coolant, gear oil, glycol, process/effluent water and chemicals.
Product LinesMagnetic Filter Pads: Attaches to and compliments existing disposable filters for lube oil, fuel, hydraulics, and coolants applications. Magnetic Filter Rods & Scrubbers: Multiple designs for inline and reservoir applications with or without traditional filtration.ADD Vantage 9000 Series: Designed to replace disposable filters, combining two filtration technologies in one filter. Cleanable true absolute rated Stainless Steel elements and patented magnetic filter technology results in a highly effective environmentally friendly filter.
Why Filter Ferrous Contaminants?Removal of ferrous contaminants (iron, steel, etc) will dramatically reduce the damaging wear cycle, extending the life, the fluids and equipment.Studies show ferrous particles smaller than 10 microns will generate 3 to 5 times more wear than larger particles.Equipment is being manufactured with tighter tolerances causing a demand for higher filtration requirements to sub-micron levels. These contaminates are carried into high pressure contact areas causing damage to softer metals, seals, bearings and gaskets.The use of extremely strong magnetic fields, are required to trap these particles, especially in “high flow” and or high viscous fluids.OEI’s patented magnetic technology traps ferrous and nonferrous contaminants to sub-micron in size.In many cases this is the first time credible filtration has been achieved to this level.
2000 • 2500 • 3000 SeriesMagnetic Filter Rods
For installation inside of elements, tanks and reservoirs for both static and mobile equipment
Page 4 - 6, 10-11
7000 SeriesMagnetic Plugs
Replacement drain or level plug for final drives, rear ends, transfer cases and transmissions
Page 7 - 9
5000 SeriesMagnetic Filter ScrubberMagnetic Y-Strainer For inline installation allowing for easy cleaning and no flow restriction
Basket & Cone StrainersOil & Gas, Pipelines, Refineries.
Fuel Gas, Canister Filtration
Page 14 - 23
8000 SeriesCustomized Filtration SystemsKidney loop, High Flow FiltrationHydrostatic Lube Lift
Page 24 - 28
ADD-Vantage 9000
The most advanced filter technology for fluids in the world.
Enviro- Wash 9000
Page 29 - 38
4000 SeriesMagnetic Funnel Scrubber
Food and Industrial Grade in line filtration
Page 12 - 13
1000 Series Magnetic Filter Pads
2
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
2
BT500 For all brands of disposable filters up to 3” in diameter• Small trans missions, rear-end dis posable filters, small fuel filters• Marine engines and recreational vehicles
BT800 For all brands of disposable filters 3”-4 “ in diameter. Fuel, engine oil, hydraulic , coolant and transmission filters.
BT900 For all brands of disposable filters 4” and up in diameter. Fuel, engine oil, hydraulic, coolant and transmission filters
Multiple high strengthmagnetic fields trap damaging
microscopic ferrous andnon-ferrous metal contaminants
that the filter cannot
OIL FILTER MAGNET
Magnetically attaches todisposable filters
Works with and compliments existing disposable filters by:
• Increased filtration of hard metal contaminants (iron & steel)• Decreases damaging wear on soft metals• Extends the life of equipment components, fluids and disposable filter elements
MAGNETIC FILTRATION SOLUTIONS
BT 900
2 3/8"
1/4"
2 3/8"
3"
6"
1/4"
3/8"
4"
6"
1000 SERIES MAGNETIC FILTER PADS –
For applica on on all types and sizes of disposable lters.1MPBT500 Magne c pad 2-3/8”W x 2-3/8”L x 1/4”T
1MPBT800 Magne c pad 3” W x 6”L x 1/4”T
1MPBT900 Magne c pad 4”W x 6”L x 3/8”T
ISO 9000 • Reusable • 1 Year Warranty on Pads • 10+ Year Life
Made in Canada
• No Tools Required
• Endure Temperature variance from -40 to 350 F
• Maintain integrity when contaminated with hydrocarbon fluids associated with all applible applications
60.3 mm
60.3 mm
6.3 mm
76.2 mm
152.4 mm
152.4 mm
6.3 mm
9.5 mm
101.6 mm
Reusable Oil Filter Magnets
3
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on PadsISO 9000 • Reusable • 3 Year Warranty • 10+ Year Life
Magne c Li 1MAGLIFT
The Mag-Li tool has a holding strength of 26 lbs (12Kg) and is used for extrac ng pistons from pumps and other ferrous parts during tear down of equipment and assist in the rebuild by replacing parts. Available in custom sizes and handle lengths.
www.OneEyeIndustries.com
Yard-Master1YM32
The “Yard-Master” handles the toughest scrap metal problems and reduces costly re damage & personal injury. Designed with OEI’s patented magne c technology that allows the magne c sweeper to oat over the ground while keeping constant contact with the ground extrac ng debris such as nails, screws, staples, banding, iron chips under the ground surface that become exposed under the pressure of a re.
The Yard-Master is constructed with high quality air lled 6” res for ease of maneuvering, available in 3
lengths 12” for shop, 32” for shop or small yards and 42” and custom sizes for yard use. The magne c sweeper is easily removed from the carrier for cleaning, simply place over a refuge receptacle and wipe clean with a heavy cloth or gloved hand.
1000 Series Magnetic Filter Pads
2000 • 2500 • 3000 Series Magnetic Filter Rods
4
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
Attach inside transmission and hydraulic cartridge elements.
ISO 9000 • Reusable • 3 Year Warranty on Rods • 10+ Year Life
2000/2500/3000 Series Magnetic Filter Rods are designed to be installed in reservoirs, gear boxes, filter elements, pipe lines and more. These Magnetic Filters will trap ferrous contaminants and non-ferrous contaminates (by static adhesion) to sub micron levels. Available in a variety of magnetic filter rod sizes and fasteners.
OEI manufactures all our Magnetic Filter Rods with 304/316 Stainless Steel Tubing (Monel and other Stainless grades are available). Rare Earth Magnets are installed in our patented method that creates the most powerful non-electric magnetic fields available. For filtration of Ferrous and Nonferrous (hydro statically charged) contamination down to sub-micron levels in all fluids, gases, chips and powders etc. Designed to be user friendly (easily cleaned) long life (10+ years) of service, custom designs are welcome.
Install inline before sock filters to eliminate wormholing.
Install in tank at the inlet/outlet
Dual Stand System3RDS – Dual Stand with a 1” Magnetic Filter Rod manufactured to be installed at the sump pump to protect from metal fatigue on engines and gear boxes. Install in open flow systems.• 6” / 150 mm to 24” / 600 mm lengths• Total Filtration• No Flow Restriction• 304/316 Stainless Steel Construction • -40 to 300F Standard or (-40 to 600F High Heat applications)
National Course orMetric Thread
Magnetic Base Cam-lock withMale Adapter
NPT, ORB, BSP orMetric Plug
5
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
Reusable Oil Filter Magnets
ISO 9000 • Reusable • 3 Year Warranty on Rods • 10+ Year Life
2000 • 2500 • 3000 Series Magnetic Filter Rods
Box 4 Fastener Size5/16” NC-Only3/8” NC-Only1/2”5/8”3/4”1”
1 1/4”1 1/2”
2”
10 mm Bolt Thread Only
12 mm Bolt Thread Only
14 mm
16 mm
18 mm20 mm
22 mm24 mm50 mm
Etc.
Blankfor MB, MBA, DS, CL or Tee
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8
25R T 9 T 112
Box 1 Magnetic Filter Rod2R 1/2” Diameter 25R 3/4” Diameter 3R 1” Diameter
3R2 2” DiameterIncludes Protective Cage Box 6 Fastener Tool
Blank NC, MB, MBA, CL or DS
IS Internal SquareES External SquareIH Internal HexEH External HexT Tee End
Box 2 TemperatureBlank 300F / 150CHH 600F / 300C
Box 3 FastenerNC Nation Course Thread
NPT Nation Pipe Thread
BSPP British Standard Pipe Parallel
BSPT British Standard Pipe Tapered
M Metric ThreadORB O-Ring BossMB Magnetic Base
MBA Magnetic Base AdjustableDS Dual StandCL Cam-LockT Tee
CU Custom
Box 5 Length
Insert in Inches 3, 3 1/2, 4, 7, 12, 16, 24, etc.
Box 7 Length
Insert in Inches1, 112, 134, 2, 3, 312, etc.
Box 8 Design Strength
Blank Stationary Equipment
HD Mobile Equipment
How to Order ...
2000/2500/3000 Series Magnetic Filter Rods
25R T 9 T 112 25R NC 38 7 T 31225R NC 38 7 T 31225R T 9 T 112
* Custom Designs are Available
Reusable Oil Filter Magnets
6
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
Magne c Sweeper25R14TH36
The magne c sweeper is a tool with numerous applica ons. Designed with a exible handle a ached to a raised magne c lter rod. This tool is used for cleaning new hydraulic uid, lube oil, water, coolant and chemicals stored in steel reservoirs of welding and grinding slag. Other applica ons are: cleaning open bearing lube oil reservoirs, cleaning the bo om reservoirs of all manner of milling and C&C machines. Extrac ng ferrous contaminants to sub micron levels from uids contained in storage reservoirs.
Designed to be used like a broom with a exible long reach handle it cleans work area oors and tables and hard to reach areas under equipment and more. Cleaning the magne c lter is simply executed by wiping it with a cloth.
Magne c Filter Protec ve CageOEI's protec ve cage is designed to aid in the installa on and removal of the magne c lter.
The protec ve cage is supplied with all 3R2 magne c lters as a safety precau on due to the magne c lters
strength.
Box 2Fastener Type
NC - Bolt ThreadNPT - Pipe ThreadM - MetricBSP - British Pipe ThreadORB - O-Ring BossCL - Cam-Lock
Box 1 Box 2 Box 3
25RPC NC 24
Box 1MagneticFilter Size
2RPC - 1/2" Dia.
25RPC - 3/4" Dia.3RPC - 1" Dia.3R2PC - 2" Dia.
Box 3Magnetic
Filter Length
In Inches
How To Order .....
Protec ve Cage
Magne c Filter
www.OneEyeIndustries.com
2000 Series Magnetic Filter Rods
7000 Series Plugs
7
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Padswww.OneEyeIndustries.com
OEI manufactures plugs with High Energy Magne cs, designed to replace the industries standard ceramic magne c plugs for nal drives, rear ends, transfer cases and transmissions.
* 300F Opera ng Temperature (600F op onal)
Box 4 Plug Size & TypeInchesNPT, BSP ORB Sizes Metric Sizes
1/8” 02 10 mm1/4” 03 12 mm
3/8” 04 14 mm1/2” 05 16 mm5/8” 06 18 mm3/4” 08 20 mm1” 10 22 mm
1 1/4” 12 24 mm1 1/2” 14 30 mm
2” 16 36 mm
2 1/2" Etc. 42 mm
Box 1 Box 2 Box 3 Box 4 Box 5
7P ORB 16 EH
Box 1 Magnetic Plug7P Plug
Box 5 Fastener ToolIS Internal SquareES External SquareIH Internal HexEH External Hex
ESD External Square Drilled
Box 2 TemperatureBlank 300F / 150CHH 600F / 300C
Box 3 FastenerNPT Nation Pipe Thread
BSPP British Standard Pipe Parallel
BSPT British Standard Pipe Tapered
M Metric ThreadORB O-Ring Boss
How to Order ...
* Custom Sizes and Designs are available
Reusable Oil Filter Magnets
8
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Padswww.OneEyeIndustries.com
OEM Part #
Plug Conversion ChartOEI Part Number
Atlas Copco 5541 506500
ST 1520 Scoop truck 7PM3320EH
Custom ST 8B - Scoop Truck Hydraulic Tank 3R24HDAC2ES CAT
1W-1564 Magne c Filter for Engine Sump Filter (1W-1564) 3/4" x 6" w/ 3/8"nc and 2.875 x 3/8" Support tee25RCAT-1W1564
2A-3852 777 Final Drive/ Planetary, 16-H Grader Chain Case, 789 / 793 Front Wheel Cover, 621 B Final Drive 7PCAT-38372A-3852 Custom Design - 4"long x 1/2" diameter - Magne c lter on a 2A-3852 25RCAT-3852
3E-2338For: 854G Rubber Dozer Engine, 5130B Excavator, 789 Cat Haul Truck Transmission, 793 Cat Haul Truck Transmission, 330 Excavator Final Drive, 621F Cat Scraper Final Drive Plug, 345 Excavator Final Drive, 375 Excavator
7PCAT-4181
4B-2363 For: CAT 245 Excavator sump Final Drive 7PCAT-23635K-7696 Wheel loader nal drive & Brake 988,992,836,B35C 7PCAT-76965P-8005 621F Scraper Transmission housing plug 7PCAT-80055P-8006 621F Scraper Transmission housing plug 7PCAT-80065P-4484 For: 854 R.T. Dozer Di eren al, 834 R.T. Dozer Di eren al, 988, 992 Di eren als 7PCAT-44846B-5262 777 Final Drive/ Planetary, 16-H Grader Chain Case, 789 / 793 Front Wheel Cover, 621 B Final Drive 7PCAT-38376E-5047 For: 140H Grader Tandem drive plug -08 IH 7PCAT-50476E-7696 For: 140H Grader Tandem drive plug -08 IH 7PCAT-50476V-0439 For: 789 Cat Truck Final Drive, 854-G R.T Dozer Final Drive 7PCAT-0439
6V-3298For: D-8 Transmission & Final Drive, D 9L, D-10 Transmission, D-IIR Final Drive, D-IIN Final Drive, 793 Rear Axle Drain, 797 Di eren al & Final Drive
3RCAT-8334
6V-3963 For: D6 Final Drive & Di eren al Drive, 793 Final Drive 3RCAT-39638B-6599 For: 637 Cat Scraper Transmission Plug 7PCAT-65998M-3837 777 Final Drive/ Planetary, 16-H Grader Chain Case, 789 / 793 Front Wheel Cover, 621 B Final Drive 7PCAT-3837
8M-5576For: 24-H Grader Di eren al, 789 Cat Truck Rear Axle Housing, 793 Cat Truck Rear Axle Housing777 Cat Truck Rear Axle Housing, 785 Cat Truck Rear Axle Housing
7PCAT-5576
8M-7160 Magne c lter for Transmission (3/4" x 9" w/ Plate (3S3439) ) 25RCAT-7160M-2782D For: Twin Disc Transmission 7PCAT-2782D
9J-7031For: D-IIR Hydraulic Tank Drain and Engine, D-IIN Hydraulic Tank Drain and Engine, 621F Cat Scraper Final Drive, 24-H Hydraulic Grader, 854-G R.Tire Hydraulic Dozer
7PCAT-7031
9S-8004 For: 24-H Motor Grader - Tandem Housing 7PCAT-80049S-8006 For. CAT 5110 Excavator sump nal drive 7PCAT-9S8006
9S-4181For: 854G Rubber Dozer Engine, 5130B Excavator, 789 Cat Haul Truck Transmission, 793 Cat Haul Truck Transmission, 330 Excavator Final Drive, 621F Cat Scraper Final Drive Plug, 345 Excavator Final Drive, 375 Excavator
7PCAT-4181
9S-4182 For: D-10R Hydraulics, D-10N Hydraulics, 7PCAT-41829S-4183 For: 854G R.T. Dozer Engine, 5130B Excavator Engine 7PCAT-41839S-4205 For 621E CAT Scraper 7PCAT-4205
9S-4208For: 854G Rubber Dozer Engine, 5130B Excavator, 789 Cat Haul Truck Transmission, 793 Cat Haul Truck Transmission, 330 Excavator Final Drive, 621F Cat Scraper Final Drive Plug, 345 Excavator Final Drive, 375 Excavator
7PCAT-4181
9X-6451 For: C-15 CAT engine pan plug -1 1/8-12 ISEH SS 7PC15EEH
175-6689For: 24-H Grader Di eren al, 789 Cat Truck Rear Axle Housing, 793 Cat Truck Rear Axle Housing777 Cat Truck Rear Axle Housing, 785 Cat Truck Rear Axle Housing
7PCAT-5576
"Custom" = OEI's Designed Magne c Filter
OEM Magnetic Plug & Rod Cross Reference List
Reusable Oil Filter Magnets
9
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
OEM Magnetic Plug & Rod Cross Reference List
www.OneEyeIndustries.com
OEM Part Number
Plug Conversion ChartOEI Part Number
Custom CAT 16-H Grader Chain Case Magne c Filter "Includes stainless steel half coupler for 2" NPT Plug" 3R20HD78Custom CAT 24-H Grader Chain Case Magne c Filter "Includes stainless steel half coupler for 2" NPT Plug" 3R24HD78Custom CAT D-8,D-9,D-10,D-11 Hydraulic Reservoir Magne c Filter w/ cam-lock mount 3RCL18HD
P & H Custom P&H 2800 Shovel Crowd Case "Includes stainless steel half coupler for 2" NPT external hex head" 3R18HD78Custom P&H 2300 Propel Gear Box Upper Loca on " Cam Lock Mount 24" total Length, 20 " Magne c lter 3RCL24HDCU4
Custom P&H 2300 Propel Gear Box Lower Loca on " Cam Lock Mount 28" total Length 12" magne c lter3RCL28H-DCU16
KOMATSU Custom Komatso 830E Hydraulic Tank Cap # TP 0623 with 24" Magne c Filter 3RORB3224IH
CustomGE 787 Wheel Drive Filler Cap with (Sample Port / Dip S ck and Magne c Filter.)(GE#41B538253P1)
2RFCS787
CustomGE 787 Wheel Drive Filler Cap with (1/4 or 5/16" Sample Port Dip S ck and Magne c Filter.) (GE#41B538253P1)
2RFCS787-2
CustomGE 787 Wheel Drive Filler Cap with (1/2" Sample Port Dip S ck and Magne c Filter (GE#41B538253P1)
2RFCS787-12
CustomGE 787 Wheel Drive Long Filler Cap with (1/2" Sample Port Dip S ck and Magne c Filter.) (GE#41B538253P1)
2RFCS787-127
Custom GE 787 Wheel Motor Filler Cap With Magne c Filter 6" in length (GE#41B538253P1) 25RFC78712412 830E Plug # 12412 7PM2415EH13620 Komatsu Plug # 31420, #13620 7PM3615EH31420 Komatsu Plug # 31420, #13620 7PM3615EHH6881 830E Front Spindle Plug # H6881 7PNPT1ISSF 9435 830E For: Haul Truck Wheel Drive Reservoir Plug 2RNPT1149ESTY 8879 930E Front Spindle Plug # 7PNPT114ISVJ 6489 830E Haul Truck Upper Wheel Drive Plug #VJ 6489 7PNPT114ESVS 8411 VS 8411 Komatsu Wheel Drive plug 42mm x 2.0 Magne c Plug 7PM4220IH LETOURNEAU 200-0002 Letourneau 200-0002 For: 1850 Final Drive 7PLET5262 LIEBHERR 409710601 Liebherr T282 Haul Truck Plug Part # 409710601 7PM3320EH Liebherr 380 For: Ton Wheel Drive Haul Truck 7PORB16IH Reclaimer Plug Long Travel Gear Box 42mm x 2.0 Magne c Plug 7PM4220IH SISU 98073 For: Final Drive (Western Star Haul Truck), 793/789 7PORBSISU72 SISU Di eren al (Western Star Haul Truck) 793/789 7PORBSISUH7510336-F Front Wheel Brake Assem. Plug 2RLBR10336F John Deere R26727 John Deer R26727 For: G Series Back Hoe Axle Di eren al MT-2075, 310-G, 210-LE 2RORB5727
Hyundai Loader HL770-7 7PMM2215IS Ford New Holland 9848947 Rear di eren al Drain Plug 7PFD-8947
Custom Sizes and Designs are available
Industrial Filtration Solutions
10
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
Magne c Filter / Level Monitor25RFC787 One Eye Industries is pleased to announce an innova ve way to lter the contamina on in the Komatsu 830E & GE 787 wheel motors. This magne c lter design o ers a mul purpose; rst it acts as a level monitor for the
oil, second as a lter to remove the most damaging contaminant “ferrous metal” to submicron levels. The third is a predic ve maintenance tool, simply remove the trapped contamina on and send it away to a lab for analysis.
The test will iden fy premature wear pa erns of the components and allow predic ve maintenance scheduling. The adjacent photo shows this magne c lter is designed with our new 3/4” diameter magne c lter projec ng
mul ple 4” radial elds. A level line has been marked on the lter to aid in the maintenance of this unit. See our case study informa on on our web-site to see the results of applica ons around the world.
www.OneEyeIndustries.com
N E W !
10
2RFCS787-2 or 2RFCS787-12(1/4" OR 5/16" Sample Tube) (1/2" Sample Tube)
4 in 1 Magne c Filter/ Level Monitor/ Sampling Port2RFCS787- #
One Eye Industries is pleased to announce an innova ve way to lter and prevent ingression contamina on in the Komatsu 830E
& GE 787 wheel motors. This design is mul purpose; rst it acts as a level monitor for the oil, second as a lter to remove the most damaging contaminant “ferrous metal” to submicron levels, third capable of extrac ng an oil sample without removing the ller cap reducing the opportunity for foreign materials to enter.
The fourth is a predic ve maintenance tool, simply remove the trapped contamina on from the magne c lter and send it away to a lab for analysis.
The test will iden fy premature wear pa erns of the components and allow predic ve maintenance scheduling. The adjacent photos shows the magne c lter is designed with a 1/2” diameter projec ng mul ple 3” radial elds. A dip s ck and a sampling port has been installed to aid in the preventa ve maintenance of this unit.
Dip S ck
Magne c Filter
Sample Port
11
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
Reusable Oil Filter MagnetsIndustrial Filtration Solutions
CAT Transmission Replacement Filter25RCAT-7160
The OEI magne c lter is designed to replace the ceramic OEM magne c ltra on technology.
OEI’s powerful rare earth magne c elds drama cally improve ltra on of ferrous contamina on to sub-micron levels. This allows easy cleaning and collec on for analysis of the trapped contamina on, extending uid and transmission component life. Increases opera onal me and
decreases maintenance costs.
Another advantage is to eliminate the opportunity for the OEM magne c lter to contaminate the transmission uid as a result of vibra on and fracturing of the exposed ceramic magnets.
Old CeramicTechnology
25RCAT-1W1564
The 25RCAT-1W1564 magne c lter is designed to be installed in the engine sump screen lter (1W-1564)enhancing its ltra on capability to sub-micron levels with the use of OEI's patented magne c technology.
The magne c lter has been designed for easy installa on, simply remove the bolt and washer #8-9, place the washer on the magne c lter and use the magne c lter to hold the sump screen in place. A Tee handle has been installed to assist with the installa on.
www.OneEyeIndustries.com
Industrial Filtration Solutions
4000 Series Magnetic Funnel Scrubber
12
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
12
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
4000 FG Series Magnetic Funnel Scrubber is designed for maximum protection for sanitary lines and processing equipment from damaging ferrous contaminants. OEI’s patented Magnetic Technology traps particles to sub-micron.
• A variety of sanitary connec-tions are available for ease of installation and service.
• Employs powerful magnetic filter rods with full exposure to the product, with mini-mal flow restrictions and maximum contamination exposure.
• Magnetic filter rods are eas-ily removed for inspection and /or cleaning.
• Magnetic field strength removes ferrous contamina-tion down to sub microns.
• Designed for permanent installations; simply flush clean then remove magnet-ic filter rods and wipe clean.
• Food • Dairy
• Beverage • Pharmaceu cal
FG - Food Grade4FS42FGT
www.OneEyeIndustries.com
4000 IG Series Magnetic Funnel Scrubber is designed to remove unwanted ferrous metal (iron, steel, nickel and hardened stainless steel) from the processing lines in which products may be transferred and or packaged.
• A variety of connections are available for ease of installation and service.
• Employ powerful magnetic filter rods with full expo-sure to the product, with minimal flow restrictions and maximum contamina-tion exposure.
• Magnetic filter rods are easily removed for inspec-tion and /or cleaning.
• Magnetic field strength removes ferrous con-tamination down to sub microns.
• Designed for permanent installations, just remove magnetic filter rods and wipe clean.
• Food • Plas c Pellets
• Mineral Powders • Glass Powder
IG - Industrial Grade4FS43IGW
Box 1 Box 2 Box 3 Box 4 Box 5
4FS 4 42 2 FG T V
Box 1
Funnel Scrubber
Box 4 Installation Connection
T Tri-Clamps
W Weldlet
Box 2 Pipe Size
4112 - 1 1/2" (38mm) 44 - 4" (100mm)
42 - 2" (50mm ) 46 - 6" (150mm)
43 - 3" (75mm ) 48 - 8" (200mm)
Box 3 Usage
FG Processed Food
IG Preprocessed Food and Minerals
Box 5 Installation Mount
H Horizontal
V Verticle
4000 Series Magnetic Funnel Scrubbers
13
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
13
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Padswww.OneEyeIndustries.com
4150 SERIES MAGNETIC FUNNEL SCRUBBERS 4FS4150FG (Process Food Grade) 304/316 S/S 1-1/2" Inlet/outlet 19-1/2" L x 3" D (Houses 3-3RF334 magne c rods)3RF334 1" x 3-3/4" S/S Rod w/2" Ferrules Fastener ( ts 4FS4150FG)4FSHDSPC2 HD Single pin clamp (fastens magne c rod to scrubber)4FSBG2 Buna gasket ring (seals magne c rod to scrubber)4FS4150IG (Industrial Grade) 304/316 S/S 1-1/2" Inlet/outlet 19-1/2" L x 3" D (Houses 3-3RCL334 magne c rods)3RCL334 1" x 3-3/4" S/S Rod w/1-1/2" Cam Lock Fastener ( ts 4FS4150IG)4FSCLBG15 Buna gasket ring (seals magne c rod to scrubber)
4200 SERIES MAGNETIC FUNNEL SCRUBBERS4FS4200FG (Process Food Grade) 304/316 S/S 2" Inlet/outlet 19-1/2" L x 4" D (Houses 3-3RF434 magne c rods)3RF434 1" x 4-3/4" S/S Rod w/2" Ferrules Fastener ( ts 4FS4300/4200FG)4FSHDSPC2 HD Single pin clamp (fastens magne c rod to scrubber)4FSBG2 Buna gasket ring (seals magne c rod to scrubber)4FS4200IG (Industrial Grade) 304/316 S/S 2" Inlet/outlet 19-1/2" L x 4" D (Houses 3-3RCL434 magne c rods)3RCL434 1" x 4-3/4" S/S Rod w/1-1/2" Cam Lock Fastener ( ts 4FS4300/4200IG)4FSCLBG15 Buna gasket ring (seals magne c rod to scrubber)
4300 SERIES MAGNETIC FUNNEL SCRUBBERS4FS4300 (Process Food Grade) 304/316 S/S 3" Inlet/outlet 19-1/2" L x 4" D (Houses 3-3RF434 magne c rods)3RF434 1" x 4-3/4" S/S Rod w/2" Ferrules Fastener ( ts 4FS4300/4200FG)4FSHDSPC2 HD Single pin clamp (fastens magne c rod to scrubber)4FSBG2 Buna gasket ring (seals magne c rod to scrubber)4FS4300IG (Industrial Grade) 304/316 S/S 3" Inlet/outlet 19-1/2" L x 4" D (Houses 3-3RCL434 magne c rods)3RCL434 1" x 4-3/4" S/S Rod w/1-1/2" Cam Lock Fastener ( ts 4FS4300/4200IG)4FSCLBG15 Buna gasket ring (seals magne c rod to scrubber)
4400 SERIES MAGNETIC FUNNEL SCRUBBERS4FS4400FG (Process Food Grade) 304/316 S/S 4" Inlet/outlet 23-1/2" L x 6" D (Houses 3-3RF634 magne c rods)3RF634 1" x 6-3/4" S/S Rod w/2" Ferrules Fastener ( ts 4FS4400FG Funnel Scrubber)4FSHDSPC2 HD Single pin clamp (fastens magne c rod to scrubber)4FSBG2 Buna gasket ring (seals magne c rod to scrubber)4FS4400IG (Industrial grade) 304/316 S/S 4" Inlet/outlet 23-1/2" L x 6" D (Houses 3-3RCL634 magne c rods)3RCL634 1" x 6-3/4" S/S Rod w/1-1/2" Cam Lock Fastener ( ts 4FS4400IG)4FSCLBG15 Buna gasket ring (seals magne c rod to scrubber)
FS4600FG SERIES MAGNETIC FUNNELSCRUBBERS4FS4600FG (Process Food Grade) 304/316 S/S 6" Inlet/outlet 36" L x 8" D (Houses 4-3RF834 magne c rods)3RF834 1" x 8-3/4" S/S Rod w/2" Ferrules Fastener ( ts 4FS4600FG Funnel Scrubber)4FSHDSPC2 HD Single pin clamp (fastens magne c rod to scrubber)4FSBG2 Buna gasket ring (seals magne c rod to scrubber)4FS4600IG (Industrial Grade) 304/316 S/S 6" Inlet/outlet 36" L x 8" D (Houses 4-3RCL834 magne c rods)4R3CL834 1" x 8-3/4" S/S Rod w/2" Ferrules Fastener ( ts 4FS4600IG Funnel Scrubber)4FSCLBG15 Buna gasket ring (seals magne c rod to scrubber)
4800 SERIES MAGNETIC FUNNEL SCRUBBERS4FS4800FG (Process Food Grade) 304/316 S/S 8" Inlet/outlet 36" L x 10" D (Houses 4-3RF1034 magne c rods)3RF1034 1" x 10-3/4" S/S Rod w/2" Ferrule Fastener ( ts 4FS4800FG Funnel Scrubber)4FSHDSPC2 HD Single pin clamp (fastens magne c rod to scrubber)4FSBG2 Buna gasket ring (seals magne c rod to scrubber)4FS4800IG (Industrial Grade) 304/316 S/S 8" Inlet/outlet 36" L x 10" D (Houses 4-3RCL1034 magne c rods)3RCL1034 1" x 10-3/4" S/S Rod w/1-1/2" Cam Lock Fastener ( ts 4FS4800IG Funnel Scrubber)4FSCLBG15 Buna gasket ring (seals magne c rod to scrubber)
5000 Series Magnetic Filter Scrubber
14
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Padswww.OneEyeIndustries.com
Scrubber
Inlet/Outlet standard size is 1 1/2" NPT. Other sizes areavailable upon request, 1/4" to 1 1/2". * When installing
remember to allow clearance for rod removal.
5SC34 Series Scrubbers are designed for inline installation on low flow, light viscosity fluids such as fuel, engine lube, hydraulics and coolant systems, allowing for full exposure to the contamination and easy removal for cleaning. No flow restriction.
Magnetic filter: 3/4” D x 9” LDimension: 3” x 3” x 13” HSquare Housing 150psi
5SC34 Series Provides:
• Total Filtration
• 304/316 Stainless
• Mounts horizontal or vertical
• No flow restriction
• Plumbed with W.O.G. values (optional)
• Monel Construction (optional)
• 300 F Operating Temperature
5000 Series Magnetic Filter Scrubber
* Inlet/Outlet standard size is 2 1/2“ NPTOther sizes are available upon request,
3/4" to 2 1/2”. * When installing rememberto allow for rod removal clearance
5000 Series Provides:
• Total Filtration
• 304/316 Stainless
• Mounts horizontal or vertical
• No flow restriction
• Plumbed with W.O.G. values (optional)
• Monel Construction (optional)
• 300 F or 600 F Operating Temperature
5000 Series Scrubbers are installed prior to pumps, or on return lines for fuel, lube oil, hydraulics, coolants and water systems, allowing full exposure of the contaminants to the magnetic fields. They are easily cleaned and there is no flow restriction
5SC Dimension lbs/Kg12” 4”x4”x16”H 16304 mm 101x101x406 mm 7.224” 4”x4”x28”H 28608 mm 101x101x711 mm 12.736” 4”x4”x40”H 38914 mm 101x101x1016 mm 19.3
5SC2 Dimension lbs/Kg24" 6”x6”x30”H 57608 mm 150x150x762 mm 25.9
5SC Custom Outlet
Outlet can be located in several pos-ition standard design is 180 degrees off the inlet
Square Housing 150 psi
5SC ## RORBWLD ##
This unit is designed with offset in/outlet, a (R) round housing, the Magnetic Filter fastener is (ORB) Plug and the In/Outlet is (WLD) Weldlet
Round Housing 500 psi
5SCP12SCLNPT2This unit is designed with a (P) paral-lel in/outlet for easier installation. The ports can also be located near
the top.(5SCPT12SCLNPT2)
Square Housing150 psi
Standard Offset DesignSquare Housing 150 psi
O set Ports
0 degrees
O set Ports
Bo om
5SC012SCLNPT##5SCBTM12SCLNPT##
5000 Series Magnetic Filter Scrubber
15
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Padswww.OneEyeIndustries.com
5SCWOC9FLN8Designed for high volume low pressure
fluid filtration
5SCP ## SCLFLN ##This unit is designed for ease of installation, 5SC- (P) Parallel In/Outlet Design with (S) Square Housing, the magnetic filter fastener is (CL) cam-lock and the In/Outlet is (FLN) flange.
5SCPT ## SCLFLN ##This unit is designed for ease of installation, 5SC- (P) Parallel In/Outlet (T) ports are located near the top, (S) Square Housing, (CL) cam-lock fastener for the Magnetic Filter and the In/Outlet is (FLN) flange.
5SCD ## SCLFLN ##This unit is designed for larger piping applications, designed with offset in/outlet, 5SC- (D) Double magnetic filter with (S) Square Housing, the magnetic filter fastener is (CL) cam-lock and the In/Outlet is (FLN) flange.
Model # Body Dimension only W x D x H
5SC349SCL 3 x 3 x 13
5SC 4 x 4 x H
5SCR 4 “ Diameter x H
5SCD 4 x 6 x H
5SCP 6 x 4 x H
5SCPR 6” Diameter x H
5SCPD 6 x 6 x H
5SC2 6 x 6 x H
5SC2P 8 x 6 x H
5SC2PR 8” Diameter x H
5SC2PD 8 x 12 x H
Note: H = Magnetic filter length plus 4 inches
Note: Removal clearance is equal to the filter height
5000 SERIES SCRUBBER
16
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
16
www.OneEyeIndustries.com
Box 5: Length of Magnetic Filter Rod
9 9 inch Magnetic Filter Rod 5SC34 Scrubber only
12 12 inch Magnetic Filter Rod
24 24 inch Magnetic Filter Rod
36 36 inch Magnetic Filter Rod
Box 7: Fastener for Magnetic Filter
CL Cam-Lock 150 psi rating
ORB ORB 500 psi rating
Box 2: Magnetic Filter
34 3/4” Diameter Magnetic Filter 3 x 3 x 13H Body size
Blank 1” Diameter 300 F/ 150C
HH High Heat1” Diameter 600F/300C
2 2” Diameter 300F/ 150C
2HH High Heat2” Diameter 600F/300C
Box 3: In/Outlet Location
Blank Offset ports180 Degree off top port
0 Offset ports0 Degree off top port
90Offset ports90 Degree off top port(looking down from top)
270Offset ports270 Degree off top port(looking down from top)
P Parallel Ports Bottom
PT Parallel Ports Top
BTM Bottom Port
Box 6: Housing Design
S Square 150 psi rating
R Round (500 psi w/ ORB Fastener)
Box 9:
Port Size
1/2
3/4
1
1 1/2
2
2 1/2
etc.
Box 10:
Flange ANSI Class
150
300
600
900
1500
Box 1 : Scrubber Model
5SC 5000 SeriesLarge Flow Systems
Box 4: # of Magnetic Filters
Blank Single Magnetic Filter
D Dual Magnetic Filter
T Triple Magnetic Filter
Q Quadruple Magnetic Filter
Box 8: Port Options
NPT Nation Pipe Thread Tapered
FLN Flange
WLD Weldlet
BSP British Pipe
M Metric
HOW TO ORDER: Select the desired code (in the correct position) to construct a product.
EXAMPLE:
Box 1: Box 2: Box 3: Box 4: Box 5: Box 6: Box 7: Box 8: Box 9: Box 10:
5SC P D 24 S CL FLN 6 150
See inside back cover for Flow Rates Chart
Y-Strainer • Bronze / Brass
17
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
Y-Strainer • Bronze
www.OneEyeIndustries.com
OEI introduces ourMagnetic Filter Y-Strainer Series
OEI understands the importance of filtration and the restrictions of space on equipment. OEI saw the need to improve the filtering capabilities of the traditional Y-Strainer by installing our patented Magnetic Filter. The Y-Strainer is now capable of trapping ferrous and non-ferrous contaminants by static adhesion to the sub-micron range. This is a major improvement to many systems that rely on a Y-Strainer for protection. Visit our web site for more information, and view our case studies.
• Chemical
• Pneuma c Systems
• Steering Systems
• Grease Filtra on
• Hydraulic Systems
• Brake Systems
• Coolant Systems
• Fuel Systems
• Mobile & Sta c Equipment
BRONZE
WORKING PRESSURE (NON-SHOCK):300 PSI @ 350F
Steam Rated 400 PSI @ 150F WOG
SizeIn. mm
1 25mm1 1/2 40mm2 50mm2 1/2 64mm3 75mm4 100mm
A
4 3/4 (12cm)5 3/4 (14.6cm)6 3/4 (17.1cm)8 (20cm)9 1/2 (23.5cm)12 (30.5cm)
B
4 (10cm)5 (12.7cm)6 (15.2cm)6 (15.2cm)7 (17.5cm)10 (25.4cm)
NETWEIGHT
Lbs Kg
3 1.45 2.37 3.212 5.516 7.322 10
DIMENSIONS
* Quote per order
Box 1: Box 2: Box 3: Box 4: Box 5: Box 6:
5Y B 112 T A
Box 3
Pipe Size
1
1 1/22
2 1/2
3 4
Box 5Flange ANSI
Class Bronze leave
Blank
1 - 150
3 - 300
6 - 600
9 - 900
15 - 1500
Box 1
5Y- Magnetic Y-Strainer
Box 4
Port Type
T - Threaded
F - FlangeBox 2
B - BronzeS - Stainless Steel
Box 6
Mesh
X - No Mesh Screen
A - 20
B - 30
C - 40
D - 60
E - 100
Y-Strainer • Stainless Steel
18
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
18
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Padswww.OneEyeIndustries.com
OEI’s Stainless Steel MagneticFilter Y-Strainer Series
TempF
-20 to 100200300400500
150#Size A B WT
1” 6 3/8 5 111 1/2 7 3/4 5 1/4 172” 7 7/8 6 233” 10 7 1/2 424” 12 1/8 11 73
Working Pressure
275240215195170
150#, 300#, 600# ANSI 316SS - Raised Face Flanged
5YS112F3
150# 300# 600#
Working Pressure
720620560515480
300#Size A B WT
2” 8 5/8 6 1/4 283” 12 8 1/4 564” 14 1/2 11 98
600#Size A B WT 1” 8 3/8 5 161 1/2 9 7/8 6 242” 11 1/8 6 3/4 473” 13 3/8 9 1/2 89
Working Pressure
1440124011201030955
• Body has machine seat to hold screen securely.
• Cover has a machined screen holder to align screen during installation and to retain sediment when cap is removed.
• Body is machined to hold gasket in a blow-out proof design.
• Flanges are back faced or spot faced.
TempF
-20 to 100200300400500
Size A B WT
2” 13 3/4 8 5/8 96
Working Pressure
360030952795256023905YS2F15
Descrip on Material
Body ASTM A- 351 GR CF8MCap ASTM A- 351 GR CF8MGasket Spiral Wound SSScreen 304 SS Specify Mesh
1500# ANSI 316 SS - Raised Face / RJT Flanged
5YS2T6
• Body has machine seat to hold screen securely.
• Cap has a machined screen holder to align screen during installation and to retain sediment when cap is removed.
• Body is machined to hold gasket in a blow-out proof design
TempF
-20 to 100200300400500
600#Size A B WT
1” 4 9/16 3 1/2 51 1/2 6 1/4 5 102” 7 1/2 6 1/2 162 1/2 8 3/8 7 213 9 1/2 8 1/2 26
WorkingPressure
1440124011201030965
600# 1500#
Working Pressure
36003095279525602390
1500#Size A B WT
1” 5 1/2 4 3/4 8
1 1/2 7 1/8 6 16
2” 8 5/16 6 5/8 22
600# / 1500# ANSI - 316SS - Threaded
5000 Series Magnetic Filter Cone StrainerPipe Line Corrosion Erosion Management
19
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
NO# - Standard
I - Cloth
R - Reinforced
Wire meshon outsidesupported
Wire meshon insidesupported
Wire meshon outsidesupportedinside
––– Flow
––– Flow
––– Flow
Note: Standard perfora on is .125Other perfora ons are available
Custom sizes and designs available* Quote per order
OEI introduces the First Dual Two StageMagnetic Filtration Cone Strainer
Designed for start-ups of new and existing pipelines. Traditionally after start-up the cone strainer is removed. The compressor and or pumps (meter) are left without protection from the ferrous metal created by the erosion and corrosion of the pipeline. With OEI’s Magnetic Filtration Cone Strainer the screen can be removed and the Magnetic Filter reinstalled to offer continuous protection.
Phonographic Finish Removable Cone Mesh Raised Inner Lip ip
• Mesh screen is removed and magnetic ltration continues with minimal ow restriction
• Protects compressors, pumps and ow meters
• Traps Black Powder - ferrous and non-ferrous contamination (due to adhesion)
• Designed with OEI patented magnetic technology
• Can be ordered with or without mesh screen cone
• 2” D x 12” L magnetic lter has holding capability of 600 lbs
www.OneEyeIndustries.com
Mesh Placement
• Re neries • Oil & Gas Transmission Lines • Chemical plants
Box 1: Box 2: Box 3: Box 4: Box 5: Box 6: Box 7
5SSC 12 300 40 Y 80
Box 2
Pipe Size
06
0810
12
14
16
182024
etc.
Box 3Flange ANSI
Class Bronze leave
Blank150
300
600
900
1500
Box 1
Stainless SteelCone Strainer
Box 6Open Area
Y - 200%
Box 4
Mesh
NM - No Mesh Screen
20
30
40
60
100
Box 7Pipe
Schedule 40
80160
XXS
Box 5
5000 Series Magnetic Filter Basket StrainerPipe Line Corrosion Erosion Management
20
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
20
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
All Stainless Steel (Fabricated)Oil & Gas • Pipeline • Re neries
• All cer ca on and tes ng are available to Interna onal Standards• Custom built to allow maximum Magne c Filter employment
www.OneEyeIndustries.com
5BT90
5BTS-T Strainer
5BTSQ-T Strainer Quick Opening
5BS-Basket Strainer
T StrainerDrawing
5000 Series Magnetic Filter Basket StrainerPipe Line Corrosion Erosion Management
21
www.OneEyeIndustries.com
21
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7
5BS 316L 06 600 20 40 H
Box 1 Strainer Model
5BS Basket Strainer
5BSQBasket Strainer Quick Opening
5BTS T Basket Strainer
5BTQT Basket StrainerQuick Opening
5BT90 T 90 Basket Strainer
5BT90QT 90 Basket Strainer Quick Opening
Box 4 Flange150 900
300 1500
600 Pipe Size
Body Size Diameter
3 84 106 168 18
10 2412 26
Box 5 Mesh
20 80
40 100
60 ETC
Box 7 ProductC ChemicalsH Hydro Carbon FluidsN Natural GasW Water
Box 6 Pipe Schedule
40 160
80 XXS
Box 3 Pipe Size / Inches
3 12 244 14 306 16 36
8 18 48
10 20 Etc.
HOW TO ORDER…..
OEI Basket Strainer Body Sizing
Box 2 Stainless Grade304 304L
316 316L
309 310
Please note: OEI magne c lter basket strainers are designed with oversized housings to allow maximum employment of the magne c lters to ensure the most e cient ltra on. Industry standard of pipe to body ra o is a 2.5 to 1 ra o and OEI’s ra o is a
minimum 4:1.
A chart specifying body sizing is shown below.
Reusable Oil Filter Magnets
22
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Padswww.OneEyeIndustries.com
Introducing the OEI Dual Fuel Gas ltra on system. Incor-pora ng a magne c separator as the primary lter and a pleated stainless steel cloth element as the nal lter.
This environmentally friendly design will lter black pow-der contamina on to submicron levels at an es mated 95+ e cency. This will signi cantly improve the burn and reduce the acid wear of the pistons and spark plugs.
The magne c separators have a 5+ years opera onal life and the cleanable stainless steel cloth lter elements have a 3 to 5+ years opera onal life.
Our design allows the gas to have rst contact with our magne c separators sta oned inside the stainless steel cloth elements thereby allowing an extended element opera onal life.
The magne c separators have the most powerful non electric magne c elds in the industry with a holding strength of 300 Kg per 300 mm of length.
This magne c eld strength creates the ability to extract and trap submicron contamina on while in high ow applica ons. The change out and cleaning intervals is policed by a di eren al pressure gauge.
5000 Series Magnetic Fuel Gas Filtration System
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7
5DFG 304 4 FLN 600 C1200 10
Box 3
Pipe Size
234 68
1012
Etc.
Box 1
Model
5DFG
Box 4
In/OutletType
NPT - Thread
WLD - Weldlet
FLN - Flange
Box 7Micron Rating
102540Box 2
Housing
304
316
Box 5
NPT - Blank
WLD Blank
Flange Class
150300600900
1500
Box 6
Flow Rate
G ### -GPM
C ### - CFM
5DFG
23
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
Reusable Oil Filter Magnets
www.OneEyeIndustries.com
Magne c Canister Filtra on System
The Canister Filtra on System is designed for ltering water, coolant, cu ng oil and cleaning solu ons.
* Replacement cartridges for exis ng bag lters and cartridge lters are available
This dual ltra on system has reinforced cleanable stainless steel cloth media elements com-bined with our patented magne c ltra on system, ltering to sub-micron levels.
Features:
• Housing – stainless steel construc on, permanently piped in (up to 6” pipe size)• Elements 304 and 316 stainless steel, include magne c lter rod• Extend cleaning life up to 3x, easy to clean• Reduce maintenance cost, PM• Eliminates bags, outer baskets, bag hold down assemblies, and bag restrainers• 150 psi (standard)• Carry all sizes – custom sizes are available• Flow rates up to 400 gpm – custom design for other ow rates• High heat applica ons are available• Long life 10+ years
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7
5CF 304 2 FLN BTM 25 V
Box 3
Pipe Size
2
34
6
Box 7
Seal
B - BunanE - Ethylene Propylene
V - Viton
TEV - Teflon Encapslated Viton
TSW - Teflon (solid white)
Box 1
Model Number- Filter Length
5CF-20
5CF-30
Box 4
In/OutletType
FLN - Flange
NPT - Thread
Box 5
In/OutletLocation
Blank - 180 degree
0 - 0 degree90 - 90 degree
270 - 270 degree
BTM - Bottom
Box 6
Micron Rating
10
2540
60
80
100
Box 2
Housing
304
316
5000 Series Magnetic Canister Filtration System
8000 Series Magnetic Filter Drum
24
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
24
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Padswww.OneEyeIndustries.com
Industrial Filtration Solutions
OEI’s Magnetic Drum Filter is designed to be placed in the fluid flow. The fluids make contact with the drum, the metal finds are trapped on the drum the fluid flows under and around the drum. A scraper removes the metal finds and drops them onto a conveyor to a storage container. The drive unit can be operated by electric, pneumatic or hydraulics. Custom sizes are available, and drive units are sup-plied upon request.
8000 SERIES MAGNETIC FILTER DRUM – For applica on in e uent water, cu ng oil/water solu ons etc.
Electric or Hydraulic Drive Units (Available upon request)
8DMF7D12W 7” Diameter x 12” Wide Permanent Rare Earth Magne c Drum
8DMF14D22W 14” Diameter x 22” Wide Permanent Rare Earth Magne c Drum
8DMF24D32W 24” Diameter x 32” Wide Permanent Rare Earth Magne c Drum
ReplacementPolymer Blade
HydraulicMotor
Actual drum may notbe exactly as shown
Viscous Fluid Transfer Filtering System 8TMF22
The VFTFS ltra on system is designed to lter ferrous contaminants to sub micron levels from used heavy open gear oil thereby allowing two or more cycles of use. This will drama cally reduce consump on and cost with the added bene t of reducing your environmental footprint.
Filtra on is realized a er the heavy lube oil is heated (cSt @ 40C=1740) and pumped from the drum through our powerful magne c lter and into a clean drum for reuse. This process allows for over 95% of the used oil to be recovered for reuse. The magne c lter is designed to remove the ferrous contamina on with minimal ow restric on. Cleaning the magne c lter element is simply executed by wiping it with a cloth.
The system employs a pneuma c pump mounted with a follower plate that forces the heated oil out of the drum through the lter and into the clean oil drum. This system is suitable for a drum lid diameter between 21" to 23.8", follower plate suitable for drum dia. between 21.8" to 22.8" and ancillary ngs.
Reusable Oil Filter Magnets
25
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
8000 Series Kidney Loop System
THE NEXT GENERATION KIDNEY LOOP FILTRATION SYSTEMS
ENVIRONMENTALLY FRIENDLY AND HIGHLY EFFICIENT
www.OneEyeIndustries.com
The OEI Kidney Loop combines two ltra on technologies in a three ltering stage design that o ers a highly e cient and environmentally friendly cleanable long life ltra on system.
1st Filtering Stage and primary lter is a magne c scrubber u lizing OEI patented technology rated to sub-micron ltra on capability.
2nd and 3rd Filtering Stage is the ADD-Vantage 9000 series dual lter. The 2nd Filtering Stage is a cleanable long life stainless steel cloth media element that has an absolute ra ng of 25 or 40 microns and a nominal rat-ing of 8 to 10 microns. The stainless steel cloth media element eliminates the worm holing and channeling that occurs in cloth, paper, berglass, or polymer media. The 3rd and nal Filtering Stage is a magne c lter inside the Add-Vantage 9000 stainless steel element to trap contamina on to sub-micron levels.
System Features
• Posi ve Displacement Gear Pump• 5 - 10 gpm• Viscosity 500 or 1000 cSt• OEI 5000 Series Magne c Scrubber• Removable Oil Spill / Drip Tray• Quick Connec on Fi ngs• On/O Switch• Electrical System – Interna onal Requirements • 16”W x 20”D x 30”H
Op ons• Water Absorbant Filter• OEI Series Scrubber 24” Height• ADD-Vantage 9000 Dual Filter 12” or 24” (reusable lter element and magne c lter)• Di eren al Pressure Gauge• Pneuma c Pump• Sample Port• Mobile• Fluid Flow Gauge • Flow Switch• Par cle Counter• Isola on Ball Valve• Customer Preferred Pump or Motor (brand)
* Custom orders are available.8KLF-51-91-40-500-E-230-60-1-NPT-2
Gear Boxes - Hydraulics - Lube Oil Water - Chemicals - Glycol - Transformer Fluids
26
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Padswww.OneEyeIndustries.com
Box 1 Box 2 Box 3 Box 4 Box 5 Box 6 Box 7 Box 8 Box 9 Box 10
8KLF 51 91 25 1000 E 240-50-3 NPT 2
Box 3 ADD-Vantage 9000
Blank No Filter Mount
91 12" Tall Filter92 24" Tall Filter
Box 7 Voltage - Hertz - Phase
List
Box 1 Model Number
8KLF Kindey Filtration Stationary
8KLM Kidney Filtration Mobile
Box 4 Filter Micron Rating
Blank No Filter
x 100 100 Micron B200
x40 40 Micron B200
x25 25 Micron B200
x1 1 Micron B200
WAF Water Absorbent Filter
Box 5 Oil Viscosity
500 up to 500 cSt
1000 500 to 1000 cSt
Box 6 Pump
E Electric
P Pneumatic
Box 2 Scrubber Model
51 12" Tall Scrubber
52 24" Tall scrubber
Box 8 Pluming Connection
NPT National Pipe Thread
BSP British Standard Pipe
Q Quick Coupler
Box 9 Connection Size
List Size 1/2, 3/4, 1, 1 1/2, 2 "
Box 10 Options
DPG Differential Pressure Gauge
FFG Fluid Flow Gauge
FS Flow Switch
PC Particle Counter
SPM Specify Pump & Motor Brand
SP Sample Port
BV Isolation Ball Valve* Repalcement Parts
9EL5040001 x25 or x40 - Replacement Element 25 or 40 Micron for 91 lter9EL5040401 x25 or x40 - Replacement Element 25 or 40 Micron for 92 lter9OR348 - End Cap O-Ring for both lters9OR351sq - Filter Mount Gasket for both lters9BPA5050001 - ByPass and Magne c Filter for 91 Filter9BPA5050401- ByPass and Magne c Filter for 92 Filter9EL5040001WR - Water Absorbing lter for 91 lter 9EL5040401WR - Water Absorbing lter for 92 lter
8KLF-51-1000-E-230-60-1-NPT-2
8000 Series Kidney Loop System
8KLF-52-1000-E-230-60-1-NPT-2 8KLF-52-92-25-1000-E-230-60-1-NPT-2
Sample Port (8KLFSP)Fluid Flow Gauge (8KLFFFG)Flow Switch (8KLFFS)Par cle Counter (8KLFPC)Di eren al Pressure Gauge (8KLFDPG)
27
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
Reusable Oil Filter Magnets
The prime func on of the OEI Regrind Mill Hydrosta c Li Lube System (HLS) is to lubricate the bearing during the three cri cal periods encountered during start-up and shut-down of the mill. The HLS should be operated during normal mill opera on to maintain oil cleanliness and compliment the exis ng internal lubrica on system for the bearing. One HLS system is required for each bearing.
Start-up is the cri cal period because of the fric onal wear and stress developed prior to the forma on of an adequate hydrodynamic oil lm on the bearing surfaces.
The HLS is designed to oat the mill on a lm of oil which is introduced under high pressure (3000psi) at the center of the load area of the bearing. A sa sfactory oil lm is thereby established prior to start-up and during the cri cal period following start-up. The HLS will maintain an ample lubricant lm throughout the cri cal periods of opera on such as an unbalanced load (rock) and thermal expansion and the cooling o period.
The HLS is equipped with state of the art environmentally friendly ltra on to ensure protec on from premature wear of the en re system by maintaining a high level of oil cleanliness. The oil is ltered by a patented magne c lter installed prior to the pump to protect the pump and again by the ADD-Vantage 9000 a er the pump allowing ltra on to submicron levels. The HLS is housed in a cabinet enclosure for protec on from the harsh environment of the plant with quick connec ons for easy install and replace-ment for maintenance. Pressure gauges are visible at all mes and remote monitoring op onal.
Regrind Mill Hydrosta c Li Lube System
www.OneEyeIndustries.com
8000 Series Hydrostatic Lift
8HLS-LP-HP* Custom Order
8000 Series High Flow Magnetic Filtration Systemfor Ferrous and Non-Ferrous Contamination
28
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
28
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
The High Flow Magnetic Filtration Systemsare designed for Hydro Carbon Fluids, Chemical and Water.This system is designed to be installed inline
Custom designs and sizes are welcome !
• 2” to 8” Inlet / Outlets: Flange, Threaded or Weld let
• 5SC2P - 2” x 24” (50mm x 600mm) Magnetic Filter
• High Strength Magnetic Patented Technology rated at 300°F - 150°C (600°F - 300°C)
• Cam Lock for easy cleaning
• 2 - ADD-Vantage 9000 Filters mounted in parallel, construction with Stainless Steel elements 100% Reusable
Scrubber
8HF2P - Single 2” MF8HF2PD - Double 2” MF
* Quote per order
Number of Filters
92 - 2 Filters94 - 4 Filters
www.OneEyeIndustries.com
In/Outlet Type Size Height
FLN - Flange 2 to 8 in 24" 60cmNPT - Pipe Thread 50 to 200mmWLD- WeldletBSP- Bri sh Thread
HOW TO ORDER...
8HF2P - 92 - FLN - 3 - 24
N E W !
HOW TO ORDER...
ADD-Vantage 9000 Series
29
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
ADD-Vantage 9000 Series is the combination of two filtration technologies: • Reusable, stainless steel element• Patented magnetic filter technology
The 9000 offers the most advanced filtration on the market today; a reusable, easily cleaned, long life element.• Replaces disposable filters, eliminates environmental taxes
and used filter disposal costs
• Installs just like a disposable filter, no retro-fitting is required. Removal and inspection are easy with a built-in Femco® compatible drain plug.
• No other filter on the market can provide the significant savings 2 year payback, 10+ year effective life – and unsurpassed filtering of the ADD-Vantage 9000 Primary Filter
Traps ferrous& non-ferrouscontamination
down tosubmicron levels
which areanalyzed fora predictivemaintenance
program.
The most advanced filtration technology for fluids and oils in the world.
Primary Oil, Fuel & Hydraulic FiltersThe most advanced filtration technologyfor fluids and oils in the world.
ApplicationsPrimary oil & fuel filter applications • Designed for heavy duty diesel trucks and large capacity die-
sel engine installations in all industries• Extend oil change intervals from 300 to 1000+ hours with oil
analysis• Removes ferrous and non-ferrous contaminants to sub-micron
levels reducing wear cycle on bearings, seals, heads and pis-tons
• Reduces the scoring of fuel injectors increasing fuel economyHydraulics – primary & secondary filtration and suction & return line installations• Removes contaminants that prematurely wear pumps and
seals• Maintains high ISO cleanliness levels, extending fluid life • Reduces corrosion• Amine & glycol• Compressor lube oil• Turbines
Benefits • Continuous total filtration of the most damaging contami-
nants (iron and steel) down to 1 micron.• Flows 40% more fluid than conventional elements• True filtration, no “channeling” or “worm holing”.• Filter elements easily clean in a parts washer or an ultrasonic
cleaner, with solvent, or soap & water or the OEI Enviro Wash Station (see page 34).
• Also fits conventional paper and glass pack filters • Allows inspection of wear metals trapped on the magnetic
filter rod and filter• Eliminates costs of filter stocking and used filter disposal• Eliminates environmental impact from disposal of used filters
& oil and associated environmental taxes• 3 year full warranty, 10+ year effective life• Extend oil change intervals from 300 to 1000+ hours with oil
analysis
Specifications• High flow rate inlet, outlet & filter. Patented bypass and magnetic filter rod.• 10, 25 & 40 micron, absolute rated, filter elements filter down
to 5-7 microns before activating the bypass• Exceeds industry standards for filtration (ISO 4572), bypass
limitations, and collapse pressure (ISO 2941)• 316 stainless steel magnetic filter – continuously filters fer-
rous and non-ferrous contaminants (due to adhesion) to sub-micron levels• Industrial steel machined housing• Femco© drain compatible • Remote mounts, spare parts, o-rings and filter elements are
all available• OEI's Stainless elements with integrated magnetic filter rod,
available for Cat, Waukesha, Cummins and most other brands
We carry a complete stock of replacement O-rings, filter elements, anti-drainback valves, bypass valves and components to repair dam-aged filters.
Check our websitewww.OneEyeIndustries.com or contact us directly for more details.
Replacement O-rings, Filter Element & Repair Components
Improves Environmental Footprints
29
30
www.OneEyeIndustries.com
ADD-Vantage 9000 Series
High Flow Dual Filtration System
The “High Flow Dual Filtration System” is a combination of two filtration technologies.1) Beta 200 rated reusable stainless steel element
2) OEIs’ patented magnetic filter that extracts and traps ferrous and non ferrous contamination.
The ability to remove non ferrous contamination is through ferrous to non-ferrous abrasive contact and static adhesion.
Employed on a custom OEI high flow filter mount base that allows up to 200 gallons a minute of flow.
This filter is recommended for fuel and light viscous oils.
Available in single and duplex configurations.
9ADV9 - 266FF - NPT - B
Weight - lbs
22127
Dimensions W x D x H
9ADV9 5 x 5 x 24Base 11 x 11 x 8Inline 7 x 7 x 5
The ADD-Vantage 9000 Series bodies were designed to be held by an adjustable Pin Spanner Wrench while removing or installing the Element Cap.This tool is available at most tool supply companies.
Description: Adjustable Pin Spanner Wrench
Max Capacity: 6-1/4 "
Diameter: 3/8"
Pin Length: 1/4"
Hook Size: 15.32"
Length: 12-1/8"
2 Inch In/Outlets
NPT - Na onal PipeBSP - Bri sh PipeFLN - FlangeWLD - Weldlet
Mount
B - Base MountI - Inline
N E W !
Part # 1APSW
ADD-Vantage 9000 Series
31
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
31
www.OneEyeIndustries.com
9ADV9 - D9L - PX - x25
Duplex System W x D x H
9ADV9-D9L 12 ½” x 25” x 18” 32mm x 64mm x 46mm
9ADV9-D9XL 12 ½” x 25” x 30” 32mm x 64mm x 76mm9ADV9 - D9XL - PX - x25
OEI introduces a duplex ltra on system. Designed with OEI’s reusable dual ltra on units the stainless steel elements can be removed for cleaning and the magne c lter inspected for wear contami-nants while your equipment con nues to work.
This duplex system is very versa le with mul ple port op on from ¾” NPTF to 2” NPTF or SAE 12 to SAE24.
To Order ...
9ADV9 - BOX1 – BOX2 - BOX3
N E W !
BOX 1Body Length
BOX 2Connection
BOX 3Micron Rating
D9L – 12“ BodyD9XL – 24” Body
PB – 3/4” NPTFPC – 1” NPTFPD – 1 1/4” NPTFPE – 1 1/2” NPTFPF – 2” NPTFPM – 12 SAEPN – 16 SAEPO – 20 SAEPP – 24 SAEPX – Blank Flange
X 25X 40 X 80
X 100
ADD-Vantage 9000 Series
32
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
Dual Milling Filtration System
ADD-Vantage 9000 Series
Grease Filtration System
A 100% Reusable Filtration System designed for the machining/milling industry. This ADD-Vantage 9000 (Milling) replaces all conventional disposable filters. Designed with a dual filtration system: Stainless Steel Element with 1/16” perf. screen to trap large particles and OEI’s Patented Magnetic Filter will trap ferrous contaminants to sub-micron levels. Extending the life of your coolant/cutting fluids and equipment. This filter is easily cleaned and has an effective life of 10+ years. A remote mount base is available in 1" and 1-1/2" inlet/outlet. Continuously filters ferrous contaminants to sub-micron levels
Designed to filter grease before it reaches your bearings.The ADD-Vantage 9000 (Grease) filter is equipped with OEI’s Patented Magnetic Filter, trapping ferrous contaminants to sub-micron levels, extending the life of your seals and bearings. This filter is easily cleaned and has an effective life of 10+ years. Sold with a remote base mount, available with a 1" or 1-1/2" inlet/outlet.
This system can be installed remotely on automatic greasing systems such as ATS Electro-Lube, Lincoln, Farval, etc.
For smaller application, install OEI’s Magnetic Y-Strainer
9ADV9 - M - 24M - MillingG - Grease
Length1224
Filter System
5YB1TX
www.OneEyeIndustries.com
9ADV9 - G - 12
OEI has modified its Y-Strainers for smaller inline application for filtering grease. Equipped with OEIs patented Magnetic Filter, this system will trap ferrous contaminants extending the life of your seals and bearings.5YB1TXG - 1” inlet/outlet5YB112TXG - 1½” inlet/outlet
N E W !
N E W !
9RMHY5Remote Mount - Hydraulic1 1/2" In/OutletOther sizes available
33
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
Reusable Oil Filter Magnets
ADD-Vantage - 9000-700
OEI lters are manufactured with high grade carbon steel and are designed for easy installa on and opera on in the following applica ons: Hydraulic – Lube Oil – Coolant – Fuel – Cu ng Oils – Water Processing Systems – etc., where pressure exceeds standard spin-on lters capabili es.
The ADD-Vantage 700 series are designed with two ltra on systems in one, 1st a stainless steel element providing maximum ltra on protec on, elimina ng any chance of “channelling or worm holing” the element is reusable and available in 40, 25 or 10 micron 200 ra ng. The 2nd is our patented magne c lter designed crea ng mul ple independent radial magne c elds that extend up to three mes the distance of tradi onal magne c lters, crea ng a larger
surface area and a stronger eld presence ltering contaminants to submicron levels.The ADD-Vantage 700 is rated for 700 psi and designed with 2” NPT in/outlets and available in a 15” or 27” long unit.
How to Order...
9ADV9 – 700 - #
15” - Long Body 400 Sq inch media - 1527” - Long Body 850 sq inch media - 27
www.OneEyeIndustries.com
5.0"
Length
ADD-Vantage 9000 SeriesN E W !
Lube Bay Dispenser Filter
34
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
Reusable Oil Filter MagnetsADD-Vantage 9000 SeriesN E W !
www.OneEyeIndustries.com
THE ENVIRO-WASH 90009WSH-8
OEI introduces an environmentally friendly and cost e ec ve cleaning system for stainless steel cloth media lter elements. The Enviro-Wash 9000 cleaning system is compact, mobile, user friendly and replaces the tra-
di onal ultrasonic cleaning systems.
OEI’s biodegradable cleaning solu on will remove carbon, soot, graphite, oils, tars, solvent based products, water repellent greases, waxes, grease, soils and protein deposits.
The Enviro-Wash 9000 system is designed to clean all our stainless steel cloth media elements. The system operates as a soak and spray process that cycles in 30 minutes from dirty to clean elements and allows the cleaning of (2) 24” elements, (4) 12” elements or (8) 6” elements. The 20 litre envirowash cleaning solu on will have a cleaning capacity of 900+ lter elements on average.
Envirowash 9000 includes• Mobile wash sta on 33”W x 25”D x 40”H• 4 - 20 litre pails of envirowash • 6 - Absorbent lter pads• (12) - Element storage bags for 12” elements• (12) - Element storage bags for 24” elements
Envirowash 9000 Consumables • Envirowash solu on – available in 20 litre pails• Absorbent lter pads• Element storage bags
We carry all replacement parts for the Envirowash 9000.
Reusable Oil Filter MagnetsIndustrial Filtration Solutions
35
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
35
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Padswww.OneEyeIndustries.com
The filters below are in production, please identify other filters required. Screens are available in 10, 25 & 40 microns.Please specify. Filters for other applications and equipment manufacturers are available on order request (John Deere, Volvo).
ADD-VANTAGE 9000 REUSABLE FILTERS – FOR APPLICATION ON OIL FUEL HYDRAULIC COOLANT SYSTEMS – Cleanable 316 Stainless Steel Element & Magne c Filter & Internal Bypass – All machined steelConstruc on. Custom orders for most disposable lter sizes
3.625” OD FILTER DIMENSIONS
Engine Adapters
9ADV9-1000Primary Fuel Filter for most CAT/ Cummins / Detroit / Mac/ Volvo / Mercedes
9EA3010401 Engine Adapter 1” x 14 UN (BF 957)
9SCG20 Gasket 2.47” ID x 2.85” OD
9ADV9-B260 Engine Lube, Compressor Lube and Hydraulic Applica ons
9EA3010202 Engine Adapter 11/8” x 16 UN
9SCG20 Gasket 2.412” ID x 2.812” OD
9ADV9-B262 Engine Lube, Compressor Lube and Hydraulic Applica ons
9EA3010201 Engine Adapter 1” x 12 UN
9SCG20 Gasket 2.412” ID x 2.812” OD
9ADV9-PH3976A Engine Lube, Compressor Lube and Hydraulic Applica ons
9EA3010101 Engine Adapter 1” x 16 UN
9SCG20 Gasket 2.47” x 2.85”
9ADV9-B237 Engine Lube, Compressor Lube and Hydraulic Applica ons
9EA3010301 Engine Adapter 3/4" x 16 UN
9SCG20 Gasket 2.455” ID x 2.835” OD
3.625” COMMON FILTER COMPONENTS
9B3020201 Canister Body 3.625: x 7.5L
9EC3030001 Filter End Cap
9BPA3050201 Bypass & Magne c Filter 73mm x 1Bar/w 25RNC516525
9BPS3060001 Bypass Coil Spring
9OR218 Filter Element O-Ring
9OR236 End Cap O-Ring
9DP263750 Drain Plug 3/4" x 16 SAE
9CG263860 Drain Plug Gasket 3/4"
9EL3040201 S/S Filter Element
4.25” OD FILTER DIMENSIONS
Engine Adapters
9ADV9-PH49A CAT/ Volvo/ Mack: CAT 1R0658, 1R0714, 1R0739 1R1807, 2P4004, 2Y8096
9EA4010301 Engine Adapter 1 1/8” x 16 UN
9SCG9 Gasket 3.59” ID x 4.01” OD
9ADV9-B7155 Hitachi Exavators, Kobelco Wheel Loader
9EA4010401 Engine Adapter 1 1/2” x 16 UN
Gasket 3.875” ID x 4.315 OD
9ADV9-PH3786 Ford / IHC Trucks w/ 7.3 Turbo Diesel (94-03)
9EA4010201 Engine Adapter 1 1/2” x 16 UN
Gasket 3.692 x 4.0112”
9ADV9-0958 K2000 Fuel Primary
9EA5010203 Engin Adapter 1 1/8" x 12 UN
95CG18 Gasket 3.85" ID x 4.35 OD
9ADV9-0959 K2000 Fuel Secondary
9EA5010204 Engin Adapter 1 1/16" x 16 UN
4.25” COMMON FILTER COMPONENTS
9B4020001 Canister Body 4.25” OD x 9.9 0L
9EC4030001 Filter End Cap
9BPA4050001 Bypass & Magne c Filter 94.5mm x 1Bar/w 25RNC5166
9BPS4060001 Bypass Coil Spring
9OR226 Filter Element O-Ring
9OR242 End Cap O-Ring
9DP263750 Drain Plug 3/4" x 16 SAE
9CG263860 Drain Plug Gasket 3/4"
5.0” OD FILTER DIMENSIONS
Engine Adapters
9ADV9-0755 Cat 1R-0755
9EA5010202 Engine Adapter 1 3/8” x 16 UN
9SCG18 Gasket 3.85” ID x 4.35” OD
9ADV9-4005 Cat C15,C12, C10, C16, 3406, 3408
9EA5010201 Engine Adapter 1 1/2 x 16 UN
9SCG7 Gasket 3.85” ID x 4.21” OD
9ADV9-3566 Cat 1R1808
9EA5010007 Engine Adapter 1 1/2" x 12 UN
9SCG18 Gasket 3.845” ID x 4.35 OD
9ADV9-3612 Cummins K2000, Detroit Diesel
9EA5010004 Engine Adapter 1 1/16” x 16 UN
9SCG10 Gasket 3.64 ID x 4.31” OD
9ADV9-3671 Detroit Diesel 50,60 Series LF3671
9EA5010002 Engine Adapter 1 5/8” x 12 UN
9SCG18 Gasket 3.845” ID x 4.35 OD
9ADV9-0495 Detroit Diesel 50, 60 Series Power Guard B495
9EA5010001 Engine Adapter 1 5/8” x 12 UN
9SGC10 Gasket 3.64” ID x 4.31” OD
9ADV9-3555 Cat, Cummins, Volvo. IHC, John Deere, P3555A
9EA5010005 Engine Adapter 1 3/8” x 16 UN
9SCG7 Gasket 3.85” ID x 4.21” OD
9ADV9-7138 IHC, Detroit Series 40
9EA5010006 Engine Adapter 36mm x 1.5
9SCG10 Gasket 3.64” ID x 4.31” OD
9ADV9-3000 N14 Cummins
9EA5010101 Engine Adapter 2 1/4" x 12 UN
9SCG3 Gasket 4.06” ID x 4.58” OD
9ADV9-9001 Cummins ISX, ISB, ISC, ISM
9EA5010003 Engine Adapter 95mm x 2.5
9SCG8 Gasket 4.11” ID x 4.31” OD
9ADV9-9024 Cummins QSK60
9EA5010010 Engine Adapter 90mm x 2.0
Gasket 4.0” x 4.68” OD
5.0”OD COMMON FILTER COMPONENTS
9B5020101 Canister Body N14
9B5020001 Canister Body 5” OD x 12 5/8” L
9B5020202 Canister Body 5” OD x 9 7/8” L
9EL5040001 S/S Filter Element for 12 5/8” Body & N14
9EL5040002 S/S Filter Element for 9 7/8” Body
9BPA5050001 Bypass & Magne c Filter (25RNC387) 12 5/8 Body
9BPA5050002 Bypass & Magne c Filter (25RNC3845) 9 7/8 Body
9BPS5060001 Bypass Coil Spring
9OR230 Filter Element O-Ring
9OR348 End Cap O-Ring
9DP263750 Drain Plug 3/4" x 16 SAE
9CG263860 Drain Plug Gasket 3/4"
9EL4040001 S/S Filter Element
9EC4030001 Filter End Cap
35
36
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
36
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on PadsISO 9000 • To order any other parts not listed above, please contact us.
ADD VANTAGE 9000 HYDRAULIC FILTER
9ADV9-926170 Short Version
9B5020002 Canister Body 5” OD x 9 7/8” L
9EL5040002 S/S Filter Element 25 Micron 4.17 OD x 2.83” ID x 7.00” L
9BPA5050002 Bypass & Magne c Filter 1 Bar – 25RNC384.75
9ADV9-926170L Standard
9B5020001 Canister Body 5” OD x 12 5/8” L
9EL5040001 S/S Filter Element 25 Micron 4.17” OD x 2.83” ID x 9.73” L
9BPA5050001 Bypass & Magne c Filter 1 Bar – 25RNC387
9ADV9-926170LX2 Long Version
9B5020401 Canister Body 5” OD x 24” L
9EL5040401-B S/S Filter Element 25/40 Micron 4” OD x 2.83” ID x 21.6” L
9BPA5050401 Bypass & Magne c Filter 1 Bar – 25RNC3819
9ADV9-266-FF High Flow Filter
9EA61010 Mount Adapter w/2” Flange
9B5020401 Canister Body 5” OD x 24” L
9EL5040401-B S/S Filter Element 25/40 Micron 4” OD x 2.83” ID x 21.6” L
9BPA5050401 Bypass & Magne c Filter 1 Bar – 25RNC3819
Common Filter Components
9EA5010008 Mount Adapter 1 1/2" x 16 UN
9BPS5060001 Bypass Coil Spring
9EC5030001 Filter End Cap
9OR230 Filter Element O-Ring
9OR348 End Cap O-Ring
9DP263750 Drain Plug 3/4" x 16 SAE
9CG263860 Copper Gasket 3/4”
ADD VANTAGE 9000 MILLING FILTER
9ADV9-M-12
9B5020001 Canister Body 12 5/8”
9EL5040003 S/S Filter 1/8” Perf. 4.17 OD x 2.83 ID x 9.7 L
9BPA5050001 Bypass & Magne c Filter 1 Bar – 25RNC387
9ADV9-M-24
9B5020401 Canister Body 24”
9EL5040004 S/S Filter 1/8” Perf. 4.17 OD x 2.83 ID x 19.5 L
9BPA5050401 Bypass & Magne c Filter 1 Bar – 25RNC3819
Common Filter Components
9EA5010008 Mount Adapter 1 1/2" x 16 UN
9BPS5060001 Bypass Coil Spring
9EC5030001 Filter End Cap
9OR230 Filter Element O-Ring
9OR348 End Cap O-Ring
9DP263750 Drain Plug 3/4" x 16 SAE
9CG263860 Copper Gasket 3/4”
ADD VANTAGE 9000 GREASE FILTER
9ADV9-G-12
9EA5003901 Mount Adapter 1 1/2” x 16 UN w/ Solid Element
9B5020001 Canister Body 5” OD x 12 5/8” L
9EC50300003 End Cap w/ 3R8 Magne c Filter
9OR348 End Cap O-Ring
9000 SERIES REMOTE FILTER BASE MOUNT
9RM3000 Base Mount for 9ADV9-3000 N-19
9RM3612 Base Mount for 9ADV9-3612
9RMHY5 Base Mount for 9ADV9-926170L
STAINLESS STEEL REPLACEMENT ELEMENTS – Lube and HydraulicApplica ons Custom element sizes are available. – All OEI elements come with magne c lters – Replace OEM Disposable Elements with OEI Stainless Steel Elements.
9ELSS9600825 Stainless Element 25 Micron Absolute/10 micron Nominal 8" L
9ELSS9600840 Stainless Element 40 Micron Absolute/10 micron Nominal 8" L
9ELSS96001625 Stainless Element 25 Micron Absolute/10 micron Nominal 16" L
9ELSS96001640 Stainless Element 40 Micron Absolute/10 micron Nominal 16" L
9ELSS9800825 Stainless Element 25 Micron Absolute/10 micron Nominal 8" L
9ELSS9800840 Stainless Element 40 Micron Absolute/10 micron Nominal 16" L
9ELSS98001625 Stainless Element 25 Micron Absolute/10 micron Nominal 8" L
9ELSS98001640 Stainless Element 40 Micron Absolute/10 micron Nominal 16" L
STAINLESS STEEL SUCTION STRAINERS – Stainless Steel Suc on Strainers w/magne c lter
9ELSSSSNPT38 S/S Suc on Strainer 3/8" NPT 1.80" OD X 3.50" L
9ELSSSSNPT12 S/S Suc on Strainer 1/2" NPT 1.80" OD X 4.20" L
9ELSSSSNPT34 S/S Suc on Strainer 3/4" NPT 2.60" OD X 4.10" L
9ELSSSSNPT100 S/S Suc on Strainer 1" NPT 2.60" OD X 5.50" L
9ELSSSSNPT114 S/S Suc on Strainer 1-1/4" NPT 3.40" OD X 7.70" L
9ELSSSSNPT112 S/S Suc on Strainer 1-1/2" NPT 3.40" OD X 8.90 "L
9ELSSSSNPT200 S/S Suc on Strainer 2" NPT 3.40" OD X 10.0" L
9ELSSSSNPT212 S/S Suc on Strainer 2-1/2" NPT 5.90" OD X 8.40" L
9ELSSSSNPT300 S/S Suc on Strainer 3" NPT 5.90" OD X 10.7" L
36
ADD-Vantage 9000 Series
37
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
Reusable Oil Filter Magnets
CAT Filters Threading Dimension Gasket ADD-Vantage 9000Reusable/Cleanable
077-3058 1 1/2 x 16 5 x 7 none 9ADV9-926170077-3492 1 x 12 3 x 5 2.81 - 2.42 9ADV9-B262093-7521 1 1/8 X 16 4 X 7 2.83 - 2.46 9ADV9-B260102-2828 1 3/8 x 12 4 x 9 2.76 - 2.48 9ADV9-8878108-1153 1 3/4 x 12 11.63 L X 4.77 3.39 - 3.11 9ADV9-0973121-9868 1 3/8 X 12 4 X 6 2.76 - 2.48 9ADV9-8878126-1814 2 x 12 9.52 L X 3.13 3.13 - 1.86 9ADV9-1814126-1815 1 3/8 X 12 4 X 6 2.76 - 2.48 9ADV9-8878126-1816 1 3/4 x 12 5 x 8 3.34 - 3.13 9ADV9-6636126-1817 1 3/4 x 12 5 x 12 3.39 - 3.11 9ADV9-0973130-3212 2 x 12 3 x 9 3.13 - 1.86 9ADV9-1814134-3014 1 3/4 x 12 5 x 12 3.35 - 3.11 9ADV9-0973144-0832 1 1/2 x 16 5 x 7 none 9ADV9-926170144-6691 1 3/8 X 12 4 X 6 2.76 - 2.48 9ADV9-8878152-6902 1 3/4 x 12 5 x 14 3.34 - 3.11 9ADV9-0973156-0214 1 3/8 x 12 4 x 9 2.76 - 2.48 9ADV9-8878185-0337 2 X 12 3 X 9 3.13 - 1.86 9ADV9-1814198-3188 1 1/2 x 16 5 x 11 none 9ADV9-926170L1G-8878 1 3/8 x 12 4 x 9 2.76 - 2.48 9ADV9-88781P-2299 1 x 14 3.65 x 7 2.81 - 2.42 9ADV9-10001R-0658 1 1/8 - 16 4.25 x 10.3 3.89 - 3.55 9ADV9-PH49A1R-0712 1 x 14 9.43L X 3.72" 2.81 - 2.42 9ADV9-10001R-0713 1 1/8 - 16 3.69 x 5.2 2.81 - 2.42 9ADV9-B2601R-0714 1 1/8 - 16 4.28 x 6 3.97 - 3.59 9ADV9-PH49A1R-0716 1 1/2 -16 5.3 x 12 4.31 - 3.92 9ADV9-40051R-0734 1 X 12 5.35L X 3.66 2.81 - 2.42 9ADV9-B2621R-0739 1 1/8 x 16 4.282 x 10.3 3.96 - 3.58 9ADV9-PH49A1R-0749 1 x 14 3.68 x 9.5 2.83 - 2.46 9ADV9-10001R-0750 1 x 14 3.68 x 7 2.83 - 2.46 9ADV9-10001R-0755 1 3/8 x 16 5.3 x 12 4.28 - 3.9 9ADV9-07551R-1807 1 1/8 x16 4 x 10.38 3.97 - 3.59 9ADV9-PH49A1R-1808 1 1/2 x 16 5.3 x 12 4.31 - 3.92 9ADV9-35661W-2660 1 1/2 x16 5.3 x 12 4.31 - 3.92 9ADV9-35661W-8845 1 3/8 x 16 4.66 x 9.75 4.32 - 3.85 9ADV9-0755207-5035 1 3/4 x 12 5 x 14 3.34 - 3.11 9ADV9-0973223-7809 1 1/2 x 16 5 x 7 none 9ADV9-926170225-4118 1 3/4 x 12 5 x 12 3.38 - 3.10 9ADV9-0973244-4484 1 1/2 x16 4.65 x 11.73 4.32 - 3.85 9ADV9-3566272-1788 1 1/2 x 16 5.3 x 12 4.31 - 3.92 9ADV9-4005275-2604 1 1/2 x 16 5.3 x 12 4.31 - 3.92 9ADV9-40052P-4005 1 1/2 x 16 5.3 x 12 4.31 - 3.92 9ADV9-40052Y-8096 1 1/8x 16 4.25 x 10.3 3.89 - 3.55 9ADV9-PH49A2Y-8097 1 1/2 x16 5.3 x 12 4.31 - 3.92 9ADV9-40052Y-8670 1 x 14 3.66 x 6.85 2.81 - 2.42 9ADV9-10004T-6788 1 1/2 x 16 5 x 7 none 9ADV9-926170
ISO 9000 • To order any other items not listed above, please contact us.
ADD-Vantage 9000 Series
38
ISO 9000 • Reusable • 1 Year Warranty on Pads • 5 Year Life on Pads
Reusable Oil Filter Magnets
CAT Filters Threading Dimension GasketADD-Vantage 9000Reusable/Cleanable
4T-6915 1 1/8 X16 4 X 6 2.72 - 2.41 9ADV9-B2607W-2326 3/4 x 16 3.81 x 6.78 2.82 - 2.42 9ADV9-B2377W-2327 3/4 x 16 3.66 x 5.35 2.81 - 2.41 9ADV9-B2379N-5570 1 1/8 x 16 3.81 x 5.22 2.81 - 2.42 9ADV9-B2379N-6007 1 1/8 x 16 4.28 x 5.78 3.97 - 3.59 9ADV9-PH37869T-0973 1 3/4 x 12 11.63L X 4.77 3.39 - 3.11 9ADV9-09739T-6636 1 3/4 x 12 5 x 8 3.34 - 3.13 9ADV9-66369T-8578 1 1/2 x 16 5 x 7 none 9ADV9-9261709U-5870 1 1/2 x 16 5 x 11 none 9ADV9-926170L9U-6983 1 1/2 x 16 5 x 11 none 9ADV9-926170L9U-6984 1 1/2 x 16 5 x 11 none 9ADV9-926170L9U-6985 1 1/2 x 16 5 x 11 none 9ADV9-926170L
CAT Filters Element DimensionADD-Vantage 9000Reusable/Cleanable
054-1719 element 9.02L X 1.61 X 3.85 9ELSSK409X25077-5479 element 9.02L X 1.61 X 3.85 9ELSSK409X25086-3940 element 9.02L X 1.61 X 3.85 9ELSSK409X25132-8875 element 9.25L x 4.0 x 2.27 9ELSS77340132-8876 element 9.0L x 5.07 x 3.34 9ELSS77840134-0964 element 8.03L 3.1 X 1.71 9ELSS96008X251M-9156 element 9.25L x 4.0 x 2.27 9ELSS773251R-0719 element 9.25L x 4.0 x 2.27 9ELSS773401R-0773 element 9.25L x 4.0 x 2.27 9ELSS773401R-0778 element 9.0L x 5.07 x 3.34 9ELSS778402J-1560 element 9.0L x 5.07 x 3.34 9ELSS778402M-3943 element 9.25L x 4.0 x 2.27 9ELSS773404J-0806 element 9.0L x 5.07 x 3.34 9ELSS778404J-6064 element 9.0L x 5.07 x 3.34 9ELSS778404T-3131 element 9.25L x 4.0 x 2.27 9ELSS773404T-3132 element 9.0L X 5.07 X 3.34 9ELSS77825
ISO 9000 • To order any other items not listed above, please contact us.
ADD-Vantage 9000 Series
www.OneEyeIndustries.com
Scrubber Flow Rates
ScrubberModel 5SC349SCL 5SC12SCL 5SC24SCL 5SC36SCL 5SC212SCL 5SC224SCL
Viscosi es BasecSt @ 40C
Water, Coolant Deisel Fuel (1 - 30 St)Single Pass Filtra on GPM 8 21 40 60 50 98Mul Pass Filtra on 30 81 95 122 200 400
Engine, Gear andHydraulic Oil / cStSAE 10 (40 - 110 cSt)Single Pass Filtra on GPM 7 20 38 55 50 98Mul Pass Filtra on 30 65 80 90 190 380
SAE 20 (220 cSt)Single Pass Filtra on GPM 6 15 30 45 40 70Mul Pass Filtra on 15 41 76 75 133 200
SAE 30 (460 cSt)Single Pass Filtra on GPM 5 12 20 25 25 40Mul Pass Filtra on 10 25 30 35 65 95
SAE 40 (680 cSt)Single Pass Filtra on GPM 3 6 10 12 12 20Mul Pass Filtra on 5 13 16 20 40 65
Gear Oil (1000 cSt)Single Pass Filtra on GPM 0 3 5 6 8 15Mul Pass Filtra on 0 5 8 11 22 40
LIMITED WARRANTY3 Year Limited Warranty on 2000, 3000, 4000, 5000 and 8000 Series inclusive plus ADD-Vantage 9000 Series
(Ten year life expectancy).1 Year Limited Warranty on 500, 800, 900 and 7000 Series
(Five year life expectancy).
The exclusive remedy for breach of this warranty is replacement of any product which the buyer, within the warranty period, has notified the Seller in writing to be defective, and which the Seller has determined to be defective. If the buyer has submitted a warranty registration card for the product, the notice of the defect must include a proof of purchase. The Buyer will be responsible for all costs of shipment of replacement parts. In no event will the Seller’s liability for any damage exceed the purchase price of the product. SELLER WILL NOT BE LIABLE TO THE BUYER FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES INCLUDING, WITHOUT LIMITATION, LOST REVENUES OR PROFITS, EXPENSES RELATED TO TRAVEL, AND LOSS DUE TO PERSONAL INJURY. The sole purpose of the stipulated remedy shall be to provide the Buyer with free replacement of defective parts in the manner provided herein. This exclusive remedy shall not be deemed to have failed of its essential purpose so long as the Seller is willing and able to replace defective parts in the prescribed manner. SUCH WARRANTY IS EXTENDED ONLY TO THE ORIGINAL BUYER OF THE FILTER MASTER AND DOES NOT EXTEND TO A REPURCHASER OF THE PRODUCT. THE WARRANTIES IN THIS AGREEMENT ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH OTHER WARRANTIES ARE EXPRESSLY DISCLAIMED. THE SELLER HAS NOT MADE AND DOES NOT HEREBY MAKE ANY OTHER REPRESENTATION, WARRANTY OR COVENANT WITH RESPECT TO THE CONDITION, QUALITY, DURABILITY, DESIGN, OPERATION, CAPACITY, FITNESS FOR USE, OR SUITABILITY OF THE EQUIPMENT. THIS WARRANTY DOES NOT COVER PARTS THAT ARE SUBJECT TO NORMAL WEAR AND/OR DETRIMENTAL EFFECTS OF EROSION, CORROSION OR TEMPERATURE. CUSTOM PRODUCTS will have their own warranty supplied.
DEALER INFORMATION:
Since 2004REV2010