Embed Size (px)
Citation preview
2012CUSTOM CLUB OPTIONSSHAFTS, GRIPS, SPECS, CUSTOMISATION
2 TITLEIST CLUB SPEC OPTION SUMMARY
LoftOptions
LoftRange
StandardLie
LieRange
StandardLengths
LengthOptions
DRIVERS
910D2 8.5°, 9.5°, 10.5°, 12° -.75° to +1.5° 58.5° -.75° to +1.5° 45” +2” to -2”
910D3 8.5°, 9.5°, 10.5° -.75° to +1.5° 58.5° -.75° to +1.5° 45” +2” to -2”
FAIRWAYS & HYBRIDS
910F Graphite 13.5°, 15°, 17°, 19°, 21° -.75° to +1.5°
57°, 57°, 57.5°, 58°, 58.5° -.75° to +1.5° 43”, 43”, 42.5”,
42”, 41.5” +2” to -1”
910Fd Graphite 13.5°, 15° -.75° to +1.5° 57°, 57° -.75° to +1.5° 43”, 43” +2” to -1”
910H Graphite 17°, 19°, 21°, 24°, 27° -.75° to +1.5°
57.75°, 58°, 58.5°, 59°, 59.5° -.75° to +1.5° 41”, 40.5”, 40”,
39.5”, 39” +2” to -1”
IRONS (6/PW)
AP1 29°/45° +2° to -2° 62.5°, 64° +4° to -2° 37.50” / 35.75” +2” to -1”
AP2 31°/47° +2° to -2° 62.5°, 64° +4° to -2° 37.50” / 35.75” +2” to -1”
CB & MB 31°/47° +2° to -2° 62.5°, 64° +2° to -2° 37.50” / 35.75” +1” to -.5”
VOKEY DESIGN WEDGES
Vokey Spin Milled Tour Chrome 46° to 64° +1° to -1° 64° +2° to -2° 35.75” to 34.75” +2” to -1”
Vokey Spin Milled Oil Can 46° to 64° +2° to -2° 64° +4° to -4° 35.75” to 34.75” +2” to -1”
Vokey Spin MilledBlack Nickel 46° to 64° +1° to -1° 64° +2° to -2° 35.75” to 34.75” +2” to -1”
SCOTTY CAMERON PUTTERS
Scotty Cameron Studio Select(Includes Kombi and Kombi-S) 4° +1° to -1° 71° +2° to -2° 33”, 34”, 35” 33”, 34”, 35”
Scotty Cameron California 4° +1° to -1° 71° +2° to -2° 33”, 34”, 35” 33”, 34”, 35”
NEW Scotty Cameron California 4° +1° to -1° 71° +2° to -2° 33”, 34”, 35” 33”, 34”, 35”
Kombi Mid 4° N/A 71° +2° to -2° 43” 40”, 41”, 42”, 43”, 44”
Kombi Long 4° N/A 79° -2° 50” 48”, 50”
TITLEIST CLUB SPEC OPTION SUMMARY 3
Tip Trim Options
Stock Shafts
Custom Shafts
StockGrip
CstmGrips
Grip Size Options
DRIVERS
910D2 0.5”, 1”, 1.5”
Aldila RIP a 60 Project X Tour Issue X-7C3Titleist Diamana ‘ahina 72Titleist Diamana Kai’li 65Titleist Diamana ‘ilima 61
Page 6/7360° Tour
Velvet Rubber
Pages 20/21
- 1/64”, Std, +1/64”, +1/32”, +3/64”, +1/16”
910D3 0.5”, 1”, 1.5”
Aldila RIP a 60 Project X Tour Issue X-7C3Titleist Diamana ‘ahina 72Titleist Diamana Kai’li 65
Page 6/7360° Tour
Velvet Rubber
Pages 20/21
- 1/64”, Std, +1/64”, +1/32”, +3/64”, +1/16”
FAIRWAYS & HYBRIDS
910F Graphite 0.5”, 1”, 1.5”
Titleist Diamana ‘ahina 82Titleist Diamana Kai’li 75
Project X Tour Issue X-8C4Page 6/7
360° Tour Velvet Rubber
Pages 20/21
- 1/64”, Std, +1/64”, +1/32”, +3/64”, +1/16”
910Fd Graphite 0.5”, 1”, 1.5”Titleist Diamana ‘ahina 82Titleist Diamana Kai’li 75
Project X Tour Issue X-8C4Page 6/7
360° Tour Velvet Rubber
Pages 20/21
- 1/64”, Std, +1/64”, +1/32”, +3/64”, +1/16”
910H Graphite 0.5”, 1”, 1.5” Titleist Diamana ‘ahina 90Titleist Diamana Kai’li 80 Page 8
360° Tour Velvet Rubber
Pages 20/21
- 1/64”, Std, +1/64”, +1/32”, +3/64”, +1/16”
IRONS (6/PW)
AP1 -- True Temper Dynalite Gold XPTitleist Tour AD 65i
Page 9Tour Velvet
Rubber (NEW)
Pages 20/21
- 1/64”, Std, +1/64”, +1/32”, +3/64”, +1/16”
AP2 -- Dynamic Gold S300 Page 9Tour Velvet
Rubber (NEW)
Pages 20/21
- 1/64”, Std, +1/64”, +1/32”, +3/64”, +1/16”
CB & MB -- Dynamic Gold S300 Page 9Tour Velvet
Rubber (NEW)
Pages 20/21
- 1/64”, Std, +1/64”, +1/32”, +3/64”, +1/16”
VOKEY DESIGN WEDGES
Vokey Spin Milled Tour Chrome -- Dynamic Gold S200 Page 9
Tour Velvet Rubber (NEW)
Pages 20/21
- 1/64”, Std, +1/64”, +1/32”, +3/64”, +1/16”
Vokey Spin Milled Oil Can -- Dynamic Gold S200 Page 9
Tour Velvet Rubber (NEW)
Pages 20/21
- 1/64”, Std, +1/64”, +1/32”, +3/64”, +1/16”
Vokey Spin MilledBlack Nickel -- Dynamic Gold S200 Page 9
Tour Velvet Rubber (NEW)
Pages 20/21
- 1/64”, Std, +1/64”, +1/32”, +3/64”, +1/16”
SCOTTY CAMERON PUTTERS
Scotty Cameron Studio Select(Includes Kombi and Kombi-S) -- True Temper -- Cameron
Cord Red Page 22 --
Scotty Cameron California -- True Temper --CameronNo-Cord
BlackPage 22 --
NEW Scotty Cameron California -- True Temper --CameronPistolero
BlackPage 22 --
Kombi Mid -- True Temper -- Kombi Split Grip Page 22 --
Kombi Long -- True Temper -- Kombi Split Grip Page 22 --
Titleist® offers an extensive selection of shafts, grips and customisation options to help golfers
perform to their potential. Whether players are seeking maximum distance from a driver, maximum
control from their irons or the best scoring potential in their wedges, Titleist fitters can deliver
optimum results by using the wide array of fitting tools and their advanced fitting knowledge.
KNOWLEDGE IS POWER. Through extensive testing and research, the Titleist R&D team has developed three powerful shaft performance charts which provide an accurate comparison and positioning of shafts with various launch and spin characteristics for drivers, fairways, hybrids and irons. Using these charts as a guide, a fitter can quickly and easily narrow down the available shaft options and focus on those models most likely to be a good match for the player’s ball flight requirements.
BETTER FIT.BETTER GAME.
dRIvER & FAIRwAy SHAFT COMPARISON910 DRIVER & FAIRWAY STOCK & CUSTOM SHAFTS
High
MidHigh
Mid
LowMid
Low
LAUNCH
Notes: 1) Because every player loads and releases shafts di�erently, the above chart is a relative (not absolute) measure of how each shaft performs, and how they perform relative to each other. 2) Shafts are all S-Flex. 3) All the above shafts can be used in both drivers and fairways.
Low Mid Mid High HighLow Mid
SPIN
Titleist Kai’li 65
Titleist ‘ahina 72
Titleist ‘ahina 82
Titleist ‘ilima 61
Proforce V2 96
ProLaunch Red
XCON-6
VooDoo VS7
Rombax 6X07Devotion 8
Motore F1 65
Devotion 7
Devotion 6
OZIK HD6 Proforce V2 86
NV 55
VooDoo VS6
Proforce V2 76
YSQ 75
Proforce V2 66
NV 75
YS-6+
NV 65
YSQ 65
Motore F3 60Motore F3 70
Motore Speeder VC 6.1
Motore Speeder VC 7.1
VooDoo NV6
VooDoo NV7
Project X 7
Rombax 7Z08
AXIVCore Black 69
AXIVCore Black 79
Fubuki Tour 63
Fubuki Tour 73
RIP a 60
Motore Speeder VC 7.2
Motore Speeder VC 6.2
Fubuki alpha 60
RIP a 70
RIP a 80
RIP b 70RIP’d NV 65
Rombax Pro95
Tour AD DI 5
Tour AD DI 8
Tour AD DJ 6
G-Series 60
G-Series 50
G-Series 70
Diamana Kai’li 60Diamana Kai’li 70Diamana Kai’li 80
Diamana ‘ilima 60Diamana ‘ilima 70
Diamana ‘ahina 70
Diamana ‘ahina 80
Titleist Bassara W-Series 50
Titleist Bassara W-Series 55
Kiyoshi 65Kiyoshi 75
Project X 8
Attas T2 6
Blur 005
Titleist Kai’li 75
Titleist ‘ilima 71
Proforce V2 57
Diamana Blue 63Tour AD DI 6
Motore F1 55Tour AD DI 7
Diamana Blue 73
Diamana White 63
Diamana White 73Diamana White 83
KEY
Stock Driver Shafts Stock Fairway ShaftsCustom Shafts
IRON SHAFT COMPARISON
HyBRId SHAFT COMPARISON
712 IRON STOCK & CUSTOM SHAFTS
High
MidHigh
Mid
LowMid
Low
LAUNCH
Notes: 1) Because every player loads and releases shafts di�erently, the above chart is a relative (not absolute) measure of how each shaft performs, and how they perform relative to each other. 2) Shafts are all S-Flex.
Low Mid Mid High HighLow Mid
SPIN
KEY
Stock Shafts Custom Shafts
Titleist Tour AD 65i
KBS Tour
NS PRO 950 GH
Dynamic Gold
Project X Steel
Dynalite Gold XP
VS Proto-T 75
NS PRO 850 GHNS PRO 105T
Dynamic Gold HL
Project X Flighted
Rifle Steel
NS PRO 970
VS Proto-T 85
Dynalite Gold SL
NS PRO MODUS3
Dynamic Gold SL
KBS C-Taper
NV 105
910 HYBRID STOCK & CUSTOM SHAFTS
High
MidHigh
Mid
LowMid
Low
LAUNCH
Notes: 1) Because every player loads and releases shafts di�erently, the above chart is a relative (not absolute) measure of how each shaft performs, and how they perform relative to each other. 2) Shafts are all S-Flex. 3) Dynamic Gold and KBS Tour hybrid shafts will perform di�erently than the same model iron shafts.
Low Mid Mid High HighLow Mid
SPIN
KEY
Stock Shafts Custom Shafts
NV 85 Hybrid
ProForce V2 Hybrid 89
VooDoo NV8 Hybrid
Titleist ‘ilima 70HYB
Titleist Bassara W-Series 60HYB
AXIVCore Tour Black 100Ozik Xcon Altus H
VooDoo VS8 Hybrid
Tour AD DI-85 Hybrid
KBS Tour
NS PRO 950 GH Utility
Titleist Kai’li 80HYB
ProForce V2 Hybrid 104Tour AD DI-105 Hybrid
Dynamic GoldProject X Steel
Titleist ‘ahina 90HYBProject X Tour Issue Hybrid
Tour AD YSQ 85 Hybrid
Rombax 8D07HB
Speeder 904HB
Motore F3 95HB
Surcharge Flex Weight (g) Torque Launch Drv Max Lgth
ALDILA
NV 55 Yes A, R, S 54, 56, 57 3.9˚ Mid 47”
NV 65 Yes R, S, X 67, 67, 68 3.5˚ Low/Mid 47”
NV 75 Yes R, S, X 78, 78, 79 2.8˚ Low/Mid 47”
RIP a 60 No R, S, X 62, 63, 66 2.9˚ Low/Mid 47”
RIP a 70 No R, S, X 74, 74, 77 2.7˚ Low/Mid 47”
RIP a 80 No S, X 85, 88 2.2˚ Low 47”
RIP b 70 (Black) Yes S, X 74, 76 3.1˚ Mid 47”
RIP’d NV 65 Yes R, S, X 65, 65, 67 2.8˚ Mid 47”
NV VooDoo NV6 Yes R, S, X 73, 73, 74 3.2˚ Low/Mid 47“
NV VooDoo NV7 Yes R, S, X 81, 82, 83 2.8˚ Low/Mid 47“
VooDoo VS6 Yes R, S, X 65, 66, 68 3.5˚ Low/Mid 47“
VooDoo VS7 Yes R, S, X 74, 75, 76 3.2˚ Low/Mid 47“
FUJIKURA
Blur 005 Yes R2, R, S 55, 58, 59 4.0˚ Mid 47”
Motore F1 55 Yes R, S, X 57, 57, 59 4.0˚ Low/Mid 47”
Motore F1 65 Yes R, S, X 65, 65, 65 3.2˚ Low 47”
Motore F1 75 Yes S, X 75, 75 3.0˚ Mid 47”
Motore F3 60 Yes R, S, X 61, 61, 61 3.3˚ Mid 47”
Motore F3 70 Yes R, S, X 71, 71, 71 3.0˚ Low/Mid 47”
Motore Speeder VC 6.1 Yes R, S, X 62, 64, 66 3.5˚ Low/Mid 47”
Motore Speeder VC 6.2 Yes S, X 63, 65 3.6˚ Low 47”
Motore Speeder VC 7.1 Yes S, X 74, 77 3.1˚ Low/Mid 47”
Motore Speeder VC 7.2 Yes S, X 72, 74 3.1˚ Low 47”
Rombax 6X07 Yes R, S, X 64, 66, 67 3.4˚ Low/Mid 47”
Rombax 7Z08 Yes R, S, X 73, 74, 75 2.5˚ Low 47“
Rombax Pro95 Yes S, X 90, 92 2.9˚ Low 47”
GRAFALLOY
ProLaunch Red Yes R, S, X 62, 64, 66 3.0˚ Low 47”
GRAPHITE DESIGN
G-Series 50 Yes R, S, X 59, 60, 61 3.9˚ Mid 47”
G-Series 60 Yes R, S, X 67, 68, 71 3.3˚ Mid 47”
G-Series 70 Yes S, X 76, 78 3.1˚ Mid 47”
Tour AD DI-5 Yes R2, R1, S 54, 55, 57 4.7˚ Mid 47”
Tour AD DI-6 Yes SR, S, X 64, 65, 67 3.3˚ Mid 47”
Tour AD DI-7 Yes S, X 73, 75 3.2˚ Mid 47”
Tour AD DI-8 Yes S, X 83, 84 3.0˚ Mid 47”
Tour AD DJ-6 Yes SR, S, X 65, 66, 68 3.1˚ Mid/High 47”
Tour AD YS-Q 65 No R, S, X 67, 67, 67 3.7˚ Mid 47”
Tour AD YS-Q 75 No S, X 74, 74 3.8˚ Mid 47”
YS-6+ No R, S, X 63, 64, 65 3.5˚ Mid 47”
MATRIX
Ozik HD6 Yes R, S, X 64, 66, 68 3.2˚ Low 47”
Ozik XCON - 6 Yes R, S, X 67, 68, 69 2.5˚ Low 47”
MITSUBISHI RAYON
Diamana ‘ahina 70 Yes S, X 71, 72 2.7˚ Low 47”
Diamana ‘ahina 80 Yes S, X 83, 84 2.7˚ Low 47”
Diamana ‘ilima 60 Yes R, S, X 58, 61, 64 3.5˚ Mid 47”
Diamana ‘ilima 70 Yes S, X 69, 72 2.9˚ Mid 47”
Custom shafts are subject to availability and may require additional lead time.
Information subject to change.
6 TITLEIST DRIVER & FAIRWAY SHAFTS
Surcharge Flex Weight (g) Torque Launch Drv Max Lgth
MITSUBISHI RAYON (continued)
Diamana Kai’li 60 Yes R, S, X 58, 61, 64 3.5˚ Low/Mid 47”
Diamana Kai’li 70 Yes S, X 68, 71 2.9˚ Low/Mid 47”
Diamana Kai’li 80 Yes S, X 78, 81 2.8˚ Low/Mid 47”
Diamana Blue 63 Yes R, S, X 60, 63, 65 3.6˚ Low/Mid 47”
Diamana Blue 73 Yes S, X 69, 71 3.0˚ Low/Mid 47”
Diamana Blue 83 Yes S, X 78, 81 3.0˚ Low/Mid 47”
Diamana Red 63 Yes R, S 61, 62 3.2˚ Mid 47”
Diamana White 63 Yes S, X 61, 64 3.1˚ Low 47”
Diamana White 73 Yes S, X 72, 73 2.8˚ Low 47”
Diamana White 83 Yes S, X 83, 84 2.8˚ Low 47”
Fubuki Alpha 60 Yes R, S, X 61, 63, 65 3.4˚ Mid/High 47”
Fubuki Tour 63 Yes R, S, X 62, 64, 66 3.7˚ Mid 47”
Fubuki Tour 73 Yes S, X 69, 71 3.7˚ Mid 47”
Titleist Bassara W-Series 40 No L 45 7.1˚ High 47.5”
Titleist Bassara W-Series 45 No L 48 6.8˚ High 47.5”
Titleist Bassara W-Series 50 No A, R, S, X 48, 49, 51, 53 5.2˚† High 47.5”
Titleist Bassara W-Series 55 No A, R, S, X 53, 54, 56, 57 4.7˚† High 47.5”
Titleist Diamana ‘ahina 72 No R, S, X 71, 72, 73 3.2˚† Low/Mid 47.5”
Titleist Diamana ‘ahina 82 No S, X 82, 83 3.1˚† Low/Mid 47.5”
Titleist Diamana ‘ilima 61 No L, A, R, S, X 49, 56, 58, 58, 59 4.5˚† Mid/High 47.5”
Titleist Diamana ‘ilima 71 No R, S, X 70, 71, 72 3.9˚† Mid/High 47.5”
Titleist Diamana Kai’li 65 No R, S, X 62, 64, 65 4.2˚† Mid 47.5”
Titleist Diamana Kai’li 75 No R, S, X 72, 74, 75 3.7˚† Mid 47.5”
OBAN
Devotion 6 Yes R, S, X 64 - 66 3.6˚ Low 47”
Devotion 7 Yes R, S, X 74 - 80 3.5˚ Low 47”
Devotion 8 Yes S, X 78 - 84 3.5˚ Low 47”
Kiyoshi 65 Yes S, X 69, 70 3.5˚ Low/Mid 47”
Kiyoshi 75 Yes S, X 79, 81 3.1˚ Low/Mid 47”
PROJECT X
Project X Tour Issue X-7A3 No 7.0 76 3.2˚ Low/Mid 47”
Project X Tour Issue X-7B3 No 6.5 76 3.2˚ Low/Mid 47”
Project X Tour Issue X-7C3 No 6.0 73 3.5˚ Low/Mid 47”
Project X Tour Issue X-7D3 No 5.5 70 3.5˚ Low/Mid 47”
Project X Tour Issue X-8A4 No 7.0 83 3.2˚ Low/Mid 47”
Project X Tour Issue X-8B4 No 6.5 83 3.3˚ Low/Mid 47”
Project X Tour Issue X-8C4 No 6.0 82 3.5˚ Low/Mid 47”
UST MAMIYA
Attas-T2 6 Yes R, S, X 65, 65, 68 3.4˚ Mid/High 47”
Proforce AXIVCore Tour Black 69 Yes S, X 68, 68 3.1˚ Mid/High 47”
Proforce AXIVCore Tour Black 79 Yes S, X 77, 77 2.5˚ Mid/High 47”
Proforce V2 57 Yes L, A, R, S 55, 56, 57, 57 3.7˚ Mid 47”
Proforce V2 66 Yes R, S, X 65, 66, 66 3.0˚ Low/Mid 47”
Proforce V2 76 Yes R, S, X 75, 76, 76 2.2˚ Low/Mid 47”
Proforce V2 86 Yes S, X 86, 86 1.8˚ Low 47”
Proforce V2 96 Yes S, X 96, 96 1.6˚ Low 47”
Custom shafts are subject to availability and may require additional lead time.
Information subject to change.
† S flex torques listed; X flex torque is 1/2° lower; R flex +torque is 1/2° higher.
TITLEIST DRIVER & FAIRWAY SHAFTS 7
Surcharge Flex Weight (g) Torque Launch
ALDILA
NV 85 Hybrid Yes R, S, X 84, 84, 84 2.5˚ Low/Mid
NV VooDoo NV8 Hybrid Yes R, S, X 96, 97, 97 2.4˚ Low/Mid
VooDoo VS8 Hybrid Yes R, S, X 90, 90, 91 2.8˚ Mid
FST
KBS Tour Yes R, S, X 110, 120, 130 2.0˚ - 1.6˚ Low/Mid
FUJIKURA
Motore F3 95HB Yes R, S, X 95, 95, 95 2.5˚ Low
Rombax 8D07HB Yes R, S, X 92, 93, 94 2.3˚ Low
Speeder 904HB Yes S, X 98, 100 1.9˚ Low
GRAPHITE DESIGN
Tour AD DI-85 Hybrid Yes R, S, X 87, 88, 88 2.4˚ Mid
Tour AD DI-105 Hybrid Yes S, X 105, 107 2.3˚ Mid
Tour AD YSQ 85 Hybrid Yes R, S, X 87, 87, 87 2.6˚ Mid
MATRIX
Ozik XCON Altus H Yes R, S, X 85, 87, 89 2.3˚ Mid
MITSUBISHI RAYON
Titleist Bassara W-Series 50 HYB No L 51 4.6˚ High
Titleist Bassara W-Series 60 HYB No A, R, S, X 57, 60, 61, 63 3.8˚† High
Titleist Diamana ‘ahina 90 HYB No S, X 91, 92 2.5˚† Low/Mid
Titleist Diamana ‘ilima 70 HYB No L, A, R, S, X 61, 68, 71, 72, 73 3.3˚† Mid/High
Titleist Diamana Kai’li 80 HYB No R, S, X 80, 81, 82 2.8˚† Mid
NIPPON
NS PRO 950 GH Utility No R, S 94, 98 2.0˚ Mid
PROJECT X
Project X Tour Issue HB6 Hybrid Yes 7.0 97 2.2˚ Low/Mid
Project X Tour Issue HC1 Hybrid Yes 6.5 95 2.2˚ Low/Mid
Project X Tour Issue HD2 Hybrid Yes 6.0 92 2.2˚ Low/Mid
Project X Tour issue HE6 Hybrid Yes 5.5 85 3.2˚ Low/Mid
Project X Steel Yes 5.0, 5.5, 6.0, 6.5, 7.0 113 - 125 1.9˚ - 1.6˚ Mid/High
TRUE TEMPER
Dynamic Gold No R300, R400, S200, S300, S400, X100
127 - 130 1.9˚ - 1.5˚ Low/Mid
UST MAMIYA
AXIVCore Tour Black 100 Yes S, X 99, 102 2.5˚ Mid
Proforce V2 Hybrid 89 Yes S, X 89, 89 2.3˚ Mid
Proforce V2 Hybrid 104 Yes S, X 104, 104 2.1˚ Low/Mid
8 TITLEIST HYBRID SHAFTS
† S flex torques listed; X flex torque is 1/2° lower; R flex +torque is 1/2° higher.
Custom shafts are subject to availability and may require additional lead time.
Information subject to change.
Surcharge Flex Weight (g) Torque Launch
ALDILA
NV 105 Yes R, S, X 105, 105, 105 2.4˚ Low
Titleist VS Proto-T 55 No L 55 4.0˚ MId/High
Titleist VS Proto-T 75 No A, R, S 71, 73, 75 3.5˚ Mid/High
Titleist VS Proto-T 85 No R, S 85, 85 2.7˚ Mid
FST
KBS C-Taper Yes R, S, X 110, 120, 130 1.9˚ Low
KBS Hi-Rev (Wedges Only) Yes R, S, X 110, 120, 130 1.9˚ - 1.5˚ Low
KBS Tour No R, S, X 110, 120, 130 2.0˚ - 1.6˚ Low/Mid
KBS Tour Black Nickel (Wedges) Yes R, S, X 110, 120, 130 2.0˚ - 1.6˚ Low/Mid
GRAPHITE DESIGN
Titleist GDI Tour AD 50i No L 52 4.9˚ High
Titleist GDI Tour AD 65i No A, R, S 62, 63, 65 3.7˚ High
NIPPON
NS Pro Modus 3 Yes R, S, X 110, 114, 120 1.8˚ Low/Mid
NS Pro 850 GH No R, S 87, 91 1.9˚ Mid/High
NS Pro 950 GH No R, S, X 95, 98, 104 1.9˚ High
Titleist NS Pro 970 No L, A, R, S, X 96, 98, 99, 103, 107 2.6˚ - 2.1˚ Mid
Titleist NS Pro 105T No R, S, X 110, 113, 115 2.4˚ - 2.0˚ Mid/High
PRECISION
Project X Yes 5.0, 5.5, 6.0, 6.5, 7.0 113, 118, 121, 125 1.8˚ - 1.6˚ Low/Mid
Project X Flighted Yes 5.0, 5.5, 6.0, 6.5 115 - 135 2.1˚ - 1.8˚ Mid
Rifle Yes 4.0, 4.5, 5.0, 5.5, 6.0*, 6.5, 7.0 105 - 132 2.0˚ - 1.6˚ Mid
TRUE TEMPER
Dynalite Gold SL Yes R300, S300, X100 102, 103, 108 2.2˚ - 1.8˚ Mid/High
Dynalite Gold XP No R300, S300, X100 113, 117, 120 1.9˚ Mid
Dynamic Gold No R300, R400, S200, S300, S400, X100
127 - 130 1.9˚ - 1.5˚ Low
Dynamic Gold Sensicore Yes R300, R400, S200, S300, S400, X100
131 - 134 1.9˚ - 1.5˚ Low
Dynamic Gold HL No R300, S300, X100 111, 114, 116 2.2˚ - 2.0˚ Mid
Dynamic Gold SL Yes R300, S300, X100 106, 106, 109 2.1˚ Low
Dynamic Gold Spinner Yes Wedge, Wedge+ 124, 131 1.5˚ Low
Dynamic Gold Tour Issue Yes S400, X100 132, 130 1.6˚ - 1.5˚ Low
* Wedge only
TITLEIST IRON & WEDGE SHAFTS 9
Custom shafts are subject to availability and may require additional lead time.
Information subject to change.
10 TITLEIST SHAFTS
ALDILA NV 55
Aldila NV 55 is an ultra-light-weight shaft that features a dense laminate construction for tip stability and control. This technology offers the player enhanced performance and feel. For players seeking a medium trajectory with medium spin and control.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
ALDILA NV 65
Aldila NV 65 is a light-weight shaft that features a dense laminate construction for tip stability and control. This technology offers the player enhanced performance and feel. For players seeking a low/medium trajectory, medium spin and control.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
ALDILA NV 75
Aldila NV 75 is a mid-weight shaft that features a dense laminate construction for tip stability and control. This technology offers the player enhanced performance and feel. For players seeking a lower trajectory, low/medium spin and control in a medium weight shaft.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
ALDILA NV 85 HYBRID
Aldila NV 85 Hybrid is a mid-weight shaft with a mid/high flex point. Ideal for players seeking a more penetrating trajectory, medium spin with enhanced control.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
ALDILA NV 105
Aldila NV 105 is a heavy-weight shaft with a high flex point for hard swinging, quick tempo players. Ideal for players seeking a more penetrating trajectory with control and increased weight feedback.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
ALDILA RIP a 60
Aldila RIP a 60 incorporates Reverse Interlaminar Placement technology to create optimum flex and torque characteristics with incredible feel. This mid-60 gram shaft features a mid-stiff bend profile and low torque to provide a low/medium launch and spin rate.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
ALDILA RIP a 70
Aldila RIP a 70 incorporates Reverse Interlaminar Placement technology to create optimum flex and torque characteristics with incredible feel. This mid-70 gram shaft features a mid-stiff bend profile and low torque to provide a low/medium launch and spin rate.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
ALDILA RIP a 80
Aldila RIP a 80 incorporates Reverse Interlaminar Placement technology to create optimum flex and torque characteristics with incredible feel. This mid-80 gram shaft features a mid-stiff bend profile and low torque to provide a lower launch and spin rate.
This Shaft Fits:
This Shaft Fits:
This Shaft Fits:
DRIVERS
DRIVERS
DRIVERS
D
D
D
FAIRWAYS
FAIRWAYS
FAIRWAYS
F
F
F
HYBRIDS
H
HYBRIDS
H
HYBRIDS
H
IRONS
I
IRONS
I
IRONS
I
WEDGES
W
WEDGES
W
WEDGES
W
ALDILA VOODOO NV6
Aldila VooDoo NV6 gets the internal, carbon-fiber VooDoo rib system added to the stable tip of the original NV 65. These two features combine for a low/medium trajectory with a very stable feel. The green and black paint differentiates it from VooDoo VS red and black.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
ALDILA VOODOO NV7
Aldila VooDoo NV7 gets the internal, carbon-fiber rib VooDoo system added to the stable tip of the original NV 75. These two features combine for a penetrating trajectory with a very stable feel. The green and black paint differentiates it from VooDoo VS red and black.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
ALDILAVOODOO NV8 HYBRID
Aldila NV VooDoo NV8 Hybrid gets the internal, carbon-fiber rib system added to the NV 85 Hybrid. This creates a low/medium trajectory and spin rate. The green and black paint differentiates it visually from VooDoo VS red and black.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
ALDILA VOODOO VS6
Aldila VooDoo VS6 features a specially designed, one piece, carbon fiber rib system that keeps the shaft more concentric during the swing preventing ovaling for maximum energy transfer and added stability. Produces low-to-mid launch and low spin.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
ALDILA RIP’D NV 65
Aldila RIP’D NV 65 adds Reverse Interlaminar Placement technology to the successful NV profile to create maximum tip stability and control. This mid-60 gram shaft features a mid bend profile and lower torque to provide a medium ball flight and spin rate.
ALDILA RIP b 70 (BLACK)
Aldila RIP b 70 (black) is a new mid launching companion to RIP Alpha (a). It combines the same Reverse Interlaminar Placement technology with a mid bend profile and torque to provide medium ball flight and spin rates in a mid-70 gram package.
TITLEIST SHAFTS 11
ALDILA VOODOO VS8 HYBRID
Aldila VooDoo VS8 Hybrid features a specially designed, one piece, carbon-fiber rib system that keeps the shaft more concentric during the swing preventing ovaling for maximum energy transfer and added stability. Produces a medium launch and spin rate.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
FST KBS TOUR
FST KBS Tour progressive weight steel shafts are engineered with ‘moment of inertia’ analysis to increase stability. With a mid/high flex point, these shafts generate a penetrating ball flight and low to mid spin. The higher balance point produces lower swing weights.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
FST KBS TOUR BLACK NICKEL
FST KBS wedge-specific progressive weight steel shafts are engi-neered with ‘moment of inertia’ analysis to increase stability. Higher than traditional balance points produce lower swing weights than other shafts of similar weight. The black nickel finish reduces glare.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
FST KBS HI-REV
FST KBS Hi Rev is a wedge-specific steel shaft that features a slightly heavier weight and stiffer overall bend profile than the KBS Tour Black Wedge. Their higher than traditional balance points produce lower swing weights than other shafts of similar weight.
This Shaft Fits:
This Shaft Fits:
DRIVERS
D
DRIVERS
D
FAIRWAYS
F
FAIRWAYS
F
HYBRIDS
H
HYBRIDS
H
IRONS
IRONS
I
I
WEDGES
WEDGES
W
W
FUJIKURA BLUR 005
Fujikura Blur 005 uses Textreme, a lightweight spread tow carbon interweave, to provide greater swing speed without sacrificing feel or control. This high-50 gram shaft has a mid bend profile and mid-high torque to provide a medium ball flight and spin rate.
FUJIKURA MOTORE F1 55
Fujikura Motore F1 55 is an ultra-lightweight shaft that features a proprietary High Inertia Tip technology to store more energy and allow faster tip acceleration while maintaining stability. The medium/stiff bend profile produces low/mid ball flight and spin rate.
This Shaft Fits:
This Shaft Fits:
DRIVERS
DRIVERS
D
D
FAIRWAYS
FAIRWAYS
F
F
HYBRIDS
H
HYBRIDS
H
IRONS
I
IRONS
I
WEDGES
W
WEDGES
W
FUJIKURA MOTORE F1 65
Fujikura Motore F1 65 is a lightweight shaft that features a proprietary High Inertia Tip technology to store more energy and allow faster tip acceleration while maintaining stability. The stiff bend profile produces a lower ball flight and spin rate.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
ALDILA VOODOO VS7
Aldila VooDoo VS7 features a specially designed, one piece, carbon fiber rib system that keeps the shaft more concentric during the swing preventing ovaling for maximum energy transfer and added stability. Produces low-to-mid launch and low spin.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
FUJIKURA MOTORE F3 60
Fujikura Motore F3 60 is an ultra-lightweight shaft that features High Inertia Tip technology to store more energy and allow faster tip acceleration while maintaining stability. The mid bend profile produces higher ball flight and spin rate than Motore F1 65.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
FUJIKURA MOTORE F3 70
Fujikura Motore F3 70 is a light-weight shaft that features High Iner-tia Tip technology to store more energy and allow faster tip ac-celeration while maintaining stability. With a firmer bend profile than Motore F1 75, it produces slightly lower ball flight and spin rate.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TITLEIST VS PROTO-T 55
Titleist VS Proto-T 55 is an ultra-lightweight shaft with a low flex point and higher torque. It is ideally suited for players with slower swing speeds. L-flex only.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TITLEIST VS PROTO-T 75
Titleist VS Proto-T 75 is a light-weight shaft with a low/mid flex point and medium torque. This shaft works well for players with average swing speeds and smooth tempos seeking a medium-high trajectory and solid feel.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TITLEIST VS PROTO-T 85
Titleist VS Proto-T 85 is a mid-weight shaft for the player seeking a medium trajectory for a blend of distance and control. This shaft offers greater weight feedback than a light-weight graphite shaft and performs well for players with slightly faster swing speeds and tempos.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
FST KBS C-TAPER
FST KBS C-Taper steel shafts are advanced, constant taper, stepless designs with a satin brushed finish. This yields a stiffer tip section, help-ing these mid/heavy weight shafts create a low trajectory and spin rate. Lower balance points to give more normal swing weights.
FUJIKURA ROMBAX 6X07
Fujikura Rombax 6X07 uses a proprietary Triax material and a new computer woven, braided box weave composite, fortified with Kevlar Triax in the tip section. This design benefits the player who loads the shaft hard and offers control with a penetrating ball flight.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
FUJIKURA ROMBAX z 7z08
Fujikura 7Z08 uses Rombax technology and is targeted at top level players who desire a lower, more penetrating ball flight. The 7Z08 has a stiff tip and a high flex point to reduce spin for stronger players.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
FUJIKURA ROMBAX 8D07HB
Fujikura Rombax 8D07HB features a high flex point for a lower launch with lower trajectory and spin. Rombax technology provides maximum stability with enhanced feel.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
GRAFALLOY PROLAUNCH RED
Grafalloy ProLaunch Red features a higher flex point for lower launch and spin. Micro-Mesh™ tip technology provides lower torque for greater stability while offering superior feel at impact. For players seeking a light-weight shaft that promotes a lower trajectory.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
GRAPHITE DESIGN G-SERIES 60
Graphite Design G-Series 60 incorporates V Directional Technology for a balanced shaft that has good control and distance. This high-60 gram shaft features a mid bend profile and torque to provide a me-dium ball flight and spin rate.
GRAPHITE DESIGN G-SERIES 50
Graphite Design G-Series 50 incorporates X Directional Technology for a balanced shaft that has good control and distance. This high-50 gram shaft features a mid bend profile and mid/high torque to provide a medium ball flight and spin rate.
GRAPHITE DESIGN G-SERIES 70
Graphite Design G-Series 70 incorporates X Directional Technology for a balanced shaft that has good control and distance. This mid-70 gram shaft features a mid bend profile and mid/low torque to provide a medium ball flight and spin rate.
This Shaft Fits:
This Shaft Fits:
This Shaft Fits:
DRIVERS
DRIVERS
DRIVERS
D
D
D
FAIRWAYS
FAIRWAYS
FAIRWAYS
F
F
F
HYBRIDS
H
HYBRIDS
H
HYBRIDS
H
IRONS
I
IRONS
I
IRONS
I
WEDGES
W
WEDGES
W
WEDGES
W
FUJIKURA ROMBAX PRO95
Fujikura Rombax Pro 95 uses Rombax technology to reduce ovaling for more stability and a controlled ball flight. This heavyweight shaft has a stiff tip section to provide a lower ball flight and spin rate.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
FUJIKURA SPEEDER 904HB
Fujikura Speeder 904HB is a heavier weight hybrid shaft with a high flex point and lower torque. These specs make the shaft feel very firm and are suited for high swing speed players looking for a lower trajectory and less spin to maintain a controlled ball flight.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
12 TITLEIST SHAFTS
FUJIKURA MOTORE SPEEDER VC 7.1
Fujikura Motore Speeder VC 7.1 uses 7-axis carbon fiber reinforcement technology to provide a very stable platform for superior feel. The stiff bend profile and low torque combine for a lower ball flight and spin rate in a mid-70 gram package.
FUJIKURA MOTORE SPEEDER VC 7.2
Fujikura Motore Speeder VC 7.2 uses 7-axis carbon fiber reinforcement technology to provide a very stable platform for superior feel. The stiff bend profile and low torque combine for low ball flight and spin rate in a mid-70 gram package.
This Shaft Fits:
This Shaft Fits:
DRIVERS
DRIVERS
D
D
FAIRWAYS
FAIRWAYS
F
F
HYBRIDS
H
HYBRIDS
H
IRONS
I
IRONS
I
WEDGES
W
WEDGES
W
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
FUJIKURA MOTORE SPEEDER VC 6.1
Fujikura Motore Speeder VC 6.1 uses 7-axis carbon fiber reinforcement technology to provide a very stable platform for superior feel. The mid/high bend profile and mid-low torque combine for low/mid ball flight and spin rate in a mid-60 gram package.
FUJIKURA MOTORE SPEEDER VC 6.2
Fujikura Motore Speeder VC 6.2 uses 7-axis carbon fiber reinforcement technology to provide a very stable platform for superior feel. The stiff bend profile and mid-low torque combine for lower ball flight and spin rate in a mid-60 gram package.
This Shaft Fits:
This Shaft Fits:
DRIVERS
DRIVERS
D
D
FAIRWAYS
FAIRWAYS
F
F
HYBRIDS
H
HYBRIDS
H
IRONS
I
IRONS
I
WEDGES
W
WEDGES
W
FUJIKURA MOTORE F3 95HB
Fujikura Motore F3 95HB is a heavier weight shaft that features proprietary High Inertia Tip technology to store more energy and allow faster tip acceleration while maintaining stability. The stiffer tip section creates a lower trajectory and spin rate.
GRAPHITE DESIGN TOUR AD DI-6
Graphite Design Tour AD DI-6 (Deep Impact) incorporates Toray nano-material in the tip section for increased stability and feel. This mid-60 gram shaft features a mid bend profile and low torque to provide medium ball flight and spin rate with good control.
GRAPHITE DESIGN TOUR AD DI-5
Graphite Design Tour AD DI-5 (Deep Impact) incorporates Toray nano-material in the tip section for increased stability and feel. This mid-50 gram shaft features a mid bend profile and torque to provide medium ball flight and spin rate with good control.
This Shaft Fits:
This Shaft Fits:
DRIVERS
DRIVERS
D
D
FAIRWAYS
FAIRWAYS
F
F
HYBRIDS
H
HYBRIDS
H
IRONS
I
IRONS
I
WEDGES
W
WEDGES
W
GRAPHITE DESIGN TOUR AD YSQ 85 HYBRID
Graphite Design YSQ 85 Hybrid features a mid flex point for a medium launch angle and spin. This shaft uses a Graphite Design’s 4 axis weave in the back of the shaft to stabilise the butt for a firm feel without excessive stiffness.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
MATRIX OzIK HD6
Matrix OZIK HD6 features a hexadecagonal (16 sided) internal platform shape which creates a stronger butt section without added weight. Combined with a stronger tip section, this shaft produces a flat, penetrating trajectory with low spin.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
GRAPHITE DESIGN TOUR AD YSQ 65
Graphite Design YSQ 65 features a mid flex point for a medium launch angle and spin. This shaft uses Graphite Design’s 4 axis carbon weave in the back of the shaft to stabilise the butt for a firm feel without excessive stiffness.
GRAPHITE DESIGN TOUR AD YSQ 75
Graphite Design YSQ 75 features a mid flex point for a slightly lower launch angle and spin. Slightly firmer and heavier than the YSQ 65, it uses Graphite Design’s 4 axis carbon weave in the back of the shaft to stabilise the butt for a firm feel without excessive stiffness.
This Shaft Fits:
This Shaft Fits:
DRIVERS
DRIVERS
D
D
FAIRWAYS
FAIRWAYS
F
F
HYBRIDS
HYBRIDS
H
H
IRONS
IRONS
I
I
WEDGES
WEDGES
W
W
GRAPHITE DESIGN YS-6+
Graphite Design YS-6+ is a light-weight shaft that offers a balance of stability, feel and shot control. Performs well for smooth tempo players who require a higher launch angle and medium spin for optimum distance.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
GRAPHITE DESIGN TOUR AD DJ-6
Graphite Design Tour AD DJ-6 incorporates the same Toray nano- material in the tip section as the Tour AD DI shafts for increased stability and feel. This mid-60 gram shaft features a softer bend profile and mid torque to provide increased launch and spin with good control.
TITLEIST GDI TOUR AD 50i
Titleist Tour AD 50i is a super-lightweight iron shaft with a low flex point and high torque. This provides a high launch angle and spin rate for the moderate speed, smooth swinging player. L-flex only.
This Shaft Fits:
This Shaft Fits:
DRIVERS
DRIVERS
D
D
FAIRWAYS
FAIRWAYS
F
F
HYBRIDS
H
HYBRIDS
H
IRONS
I
IRONS
I
WEDGES
W
WEDGES
W
GRAPHITE DESIGN TOUR AD DI-7
Graphite Design Tour AD DI-7 (Deep Impact) incorporates Toray nano-material in the tip section for increased stability and feel. This mid-70 gram shaft features a mid bend profile and low torque to provide medium ball flight and spin rate with good control.
TITLEIST GDI TOUR AD 65i
Titleist Tour AD 65i is an ultra-lightweight iron shaft witha low flex point and medium high torque. This provides a high launch angle and spin rate for the moderate speed, smooth swinging player.
This Shaft Fits:
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
GRAPHITE DESIGN TOUR AD DI-8
Graphite Design Tour AD DI-8 (Deep Impact) incorporates Toray nano-material in the tip section for increased stability and feel. This mid-80 gram shaft features a mid bend profile and low torque to pro-vide medium ball flight and lower spin rate with good control.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
GRAPHITE DESIGN TOUR AD DI-105 HYBRID
Graphite Design Tour AD DI-105 Hybrid (Deep Impact) incorporates Toray nano-material in the tip section for increased stability and feel. This low 100 gram shaft features a mid bend profile to provide mid launch and spin rate.
GRAPHITE DESIGN TOUR AD DI-85 HYBRID
Graphite Design Tour AD DI-85 Hybrid (Deep Impact) incorporates Toray nano-material in the tip section for increased stability and feel. This mid-80 gram shaft features a mid bend profile to provide mid launch and spin rate.
This Shaft Fits:
This Shaft Fits:
DRIVERS
DRIVERS
D
D
FAIRWAYS
FAIRWAYS
F
F
HYBRIDS
HYBRIDS
H
H
IRONS
IRONS
I
I
WEDGES
WEDGES
W
W
TITLEIST SHAFTS 13
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
MITSUBISHI DIAMANA WHITE 63
Mitsubishi Diamana White 63 is an ultra-lightweight shaft for the player who requires a low torque, tip stiff shaft that provides extreme stability for control. Reduces launch angle and spin and performs well for the more aggressive, faster tempo player.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
MITSUBISHI DIAMANA WHITE 73
Mitsubishi Diamana White 73 is a light-weight shaft for the player who requires a low torque, tip stiff shaft that provides extreme stability for control. Reduces launch angle and spin and performs well for the more aggressive, faster tempo player.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
MITSUBISHI DIAMANA WHITE 83
Mitsubishi Diamana White 83 is a mid-weight shaft for the player who requires a low torque, tip stiff shaft that provides extreme stability for control. Reduces launch angle and spin and performs well for the more aggressive, faster tempo player.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
14 TITLEIST SHAFTS
MITSUBISHI DIAMANA BLUE 63
Mitsubishi Diamana Blue 63 is a ultra-lightweight shaft that creates low/medium launch and spin with excellent feel and stability at impact. Good for smooth tempo players.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
MITSUBISHI DIAMANA BLUE 73
Mitsubishi Diamana Blue 73 is a light-weight shaft which offers slightly lower launch and spin than Diamana 63 with excellent feel and stability. For smooth tempo players who want more weight feedback than is provided with an ultra-light shaft.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
MITSUBISHI DIAMANA KAI’LI 60
Mitsubishi Diamana Kai’li 60 incorporates MDI technology to create a shaft that promotes good energy transfer with excellent stability and control. This ultra-lightweight shaft has a stable, low torque tip sec-tion that creates a low/medium ball flight and spin rate.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
MITSUBISHI DIAMANA KAI’LI 70
Mitsubishi Diamana Kai’li 70 uses MDI technology to create a shaft that promotes good energy transfer with excellent stability and control. This lightweight shaft has a stable, low torque tip section that creates a low/medium ball flight and spin rate.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
MITSUBISHI DIAMANA KAI’LI 80
Mitsubishi Diamana Kai’li 80 incorporates MDI technology in order to create a shaft that promotes good energy transfer with excellent stability and control. This mid-weight shaft has a stable, low torque tip section that creates a low/medium ball flight and spin rate.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
MITSUBISHI DIAMANA ‘AHINA 80
Mitsubishi Diamana ‘ahina 80 uses MDI (Multi-Dimensional Interlay) technology to create a shaft that promotes good energy transfer with excellent stability and control. This mid-weight shaft has a stiff, low torque tip section that creates a lower ball flight and spin rate.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
MITSUBISHI DIAMANA ‘ILIMA 60
Mitsubishi Diamana ‘ilima 60 uses MDI technology to create a shaft that promotes good energy transfer with excellent stability and control. This ultra-lightweight shaft has an active, low torque tip section that creates a medium ball flight and spin rate.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
MITSUBISHI DIAMANA ‘ILIMA 70
Mitsubishi Diamana ‘ilima 70 uses MDI technology to create a shaft that promotes good energy transfer with excellent stability and control. This lightweight shaft has an active, low torque tip section that creates a medium ball flight and spin rate.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
MATRIX OzIK XCON-6
Matrix OZIK XCON - 6 (X-Axis Control) shafts are built to produce a low-spin ball flight. Created as highly efficient delivery systems, XCON designs bring maximum performance in high MOI clubheads and stable feel for all players.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
MATRIX OzIK XCON ALTUS H
Matrix OZIK ALTUS H offers tour-validated performance in hybrids. A boron enhanced tip, combined with XCON efficiency and stability, produce a hybrid shaft with mid-high launch and good stability.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
MITSUBISHI DIAMANA ‘AHINA 70
Mitsubishi Diamana ‘ahina 70 uses MDI technology to create a shaft that promotes good energy transfer with excellent stability and control. This lightweight shaft has a stiff, low torque tip section that creates a low flight and spin rate.
MITSUBISHI FUBUKI ALPHA 60
Mitsubishi Fubuki Alpha 60 is an ultra-lightweight shaft that uses Modulus Differential Technology to reduce torsional twisting. The softer tip stiffness and low toque provide a higher launch and spin rate with good directional control.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
MITSUBISHI FUBUKI TOUR 63
Mitsubishi Fubuki Tour 63 is an ultra-lightweight shaft that uses Modulus Differential Technology to create consistent launch angles and spin rates. The medium tip stiffness and low torque provide a mid launch with good directional control.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
MITSUBISHI FUBUKI TOUR 73
Mitsubishi Fubuki Tour 73 is a lightweight shaft that uses Modulus Differential Technology to create consistent launch angles and spin rates. The medium tip stiffness and low torque provide a mid launch with good directional control.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TITLEIST DIAMANA ‘AHINA 90 HYB
Titleist ‘ahina 90HYB combines the MDI technology and stiff bend profile of Diamana ‘ahina with a specific torque for each flex. This results in a very stable, crisp feeling heavier shaft with lower launch/spin while matching a range of swing speeds.
TITLEIST BASSARA W-SERIES 60 HYB
Titleist Bassara W-Series Hybrid 60 uses elastic titanium nickel wire technology to provide a responsive tip section. This combines with a specific torque level for each flex to create an ultra-lightweighthybrid shaft with a high launch angle, good stability and great feel.
TITLEIST BASSARA W-SERIES 50
Titleist Bassara W-Series 50 uses elastic titanium nickel wire technology to provide a responsive tip section. This combines with a specific torque level for each flex to create a super-lightweight shaft with a high launch angle, good stability and great feel.
This Shaft Fits:
This Shaft Fits:
This Shaft Fits:
DRIVERS
D
DRIVERS
D
DRIVERS
D
FAIRWAYS
F
FAIRWAYS
F
FAIRWAYS
F
HYBRIDS
HYBRIDS
HYBRIDS
H
H
H
IRONS
I
IRONS
I
IRONS
I
WEDGES
W
WEDGES
W
WEDGES
W
TITLEIST DIAMANA ‘ILIMA 61
Titleist ‘ilima 61 combines the MDI technology and active bend profile of Diamana ‘ilima with a specific torque for each flex. This results in a great feeling, ultra-lightweight shaft with higher launch/spin while matching a range of swing speeds.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TITLEIST DIAMANA ‘ILIMA 71
Titleist ‘ilima 71 combines the MDI technology and active bend profile of Diamana ‘ilima with a specific torque for each flex. This results in a great feeling, lightweight shaft with higher launch/spin while match-ing a range of swing speeds.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TITLEIST DIAMANA ‘AHINA 72
Titleist ‘ahina 72 combines the MDI technology and stiff bend profile of Diamana ‘ahina with a specific torque for each flex. This results in a very stable, crisp feeling mid-weight shaft with lower launch/spin while matching a range of swing speeds.
TITLEIST BASSARA W-SERIES 50 HYB
Titleist Bassara W-Series Hybrid 50 uses elastic titanium nickel wire technology to provide a responsive tip section. This combines with a specific torque level to create an ultra-lightweight hybrid shaft with a high launch angle, good stability and great feel. L-flex only.
TITLEIST BASSARA W-SERIES 40
Titleist Bassara W-Series 40 uses elastic titanium nickel wire technology to provide a responsive tip section. This combines with a specific torque level to create a super-lightweight shaft with a high launch angle, good stability and great feel. L-flex only.
This Shaft Fits:
This Shaft Fits:
This Shaft Fits:
DRIVERS
DRIVERS
DRIVERS
D
D
D
FAIRWAYS
FAIRWAYS
FAIRWAYS
F
F
F
HYBRIDS
H
HYBRIDS
H
HYBRIDS
H
IRONS
I
IRONS
I
IRONS
I
WEDGES
W
WEDGES
W
WEDGES
W
TITLEIST DIAMANA ‘AHINA 82
Titleist ‘ahina 82 combines the MDI technology and stiff bend profile of Diamana ‘ahina with a specific torque for each flex. This results in a very stable, crisp feeling heavier shaft with lower launch/spin while matching a range of swing speeds.
TITLEIST BASSARA W-SERIES 55
Titleist Bassara W-Series 55 uses elastic titanium nickel wire technology to provide a responsive tip section. This combines with a specific torque level for each flex to create a super-lightweight shaft with a high launch angle, good stability and great feel.
TITLEIST BASSARA W-SERIES 45
Titleist Bassara W-Series 45 uses elastic titanium nickel wire technology to provide a responsive tip section. This combines with a specific torque level to create a super-lightweight shaft with a high launch angle, good stability and great feel. L-flex only.
This Shaft Fits:
This Shaft Fits:
This Shaft Fits:
DRIVERS
DRIVERS
DRIVERS
D
D
D
FAIRWAYS
FAIRWAYS
FAIRWAYS
F
F
F
HYBRIDS
H
HYBRIDS
H
HYBRIDS
H
IRONS
I
IRONS
I
IRONS
I
WEDGES
W
WEDGES
W
WEDGES
W
TITLEIST SHAFTS 15
OBAN DEVOTION 8
Oban Devotion 8 is mid-weight shaft that uses premium quality fibers for stability throughout the swing. A high flex point and stiff tip sec-tion create low launch and spin. Ideal for the player looking for a flat trajectory and low spin performance in a slightly heavier shaft.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
OBAN KIYOSHI 65
The Kiyoshi 65 is an ultra-lightweight shaft that uses a proprietary technology to improve torque control, bend points and stability. A medium/stiff bend profile and tip stiffness create a low/mid launching shaft with reduced spin.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
16 TITLEIST SHAFTS
NIPPON NS PRO 950GH UTILITY
Nippon NS Pro 950GH Utility Steel is a lightweight steel shaft that has a smooth swing character and energy transfer. It creates a medium launch angle and spin rate with accurate direction control.
NIPPON NS PRO 950GH
Nippon NS Pro 950GH is a lightweight steel shaft with a soft tip section to increase launch angle and spin. This shaft is ideal for the player seeking an ultra-lightweight steel shaft with good feel characteristics that wants to get the ball up in the air.
NIPPON NS PRO 850GH
Nippon NS Pro 850GH features a low/mid flex point that produces a mid/high trajectory. This shaft is ideal for the mid to high trajectory player seeking a super-lightweight steel shaft with good feel characteristics.
NIPPON NS PRO MODUS 3
Nippon NS Pro MODUS3 is a mid/heavy steel shaft with a stiffer tip and softer mid section to control trajectory and provide tight dispersion. This shaft is ideal for the stronger player looking for a mid/low launch and spin shaft.
This Shaft Fits:
This Shaft Fits:
This Shaft Fits:
This Shaft Fits:
DRIVERS
D
DRIVERS
D
DRIVERS
D
DRIVERS
D
FAIRWAYS
F
FAIRWAYS
F
FAIRWAYS
F
FAIRWAYS
F
HYBRIDS
HYBRIDS
HYBRIDS
HYBRIDS
H
H
H
H
IRONS
I
IRONS
I
IRONS
I
IRONS
I
WEDGES
W
WEDGES
W
WEDGES
W
WEDGES
W
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TITLEIST NS PRO 970
Titleist NS Pro 970 features a mid flex point that produces a mid trajectory while the softer butt section improves feel. Ideal for the mid trajectory player seeking a versatile ultra-lightweight steel shaft with good feel characteristics.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
OBAN DEVOTION 6
Oban Devotion 6 is an ultralight weight shaft that uses premium fibers for stability throughout the swing. A high flex point and stiff tip create low launch and spin. Ideal for the quick tempo player looking for a mid-weight shaft with flat trajectory and low spin performance.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
OBAN DEVOTION 7
Oban Devotion 7 is a light-weight shaft that uses premium quality fibers for stability throughout the swing. A high flex point and stiff tip create low launch and spin. Ideal for the quick tempo player looking for a light-weight shaft with flat trajectory and low spin performance.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TITLEIST DIAMANA KAI’LI 80 HYB
Titleist Kai’li 80HYB combines the MDI technology and med-firm bend profile of Diamana Kai’li with a specific torque for each flex. This results in a smooth feeling, stable mid-weight shaft with mid launch/spin while matching a range of swing speeds.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TITLEIST NS PRO 105T
Titleist NS Pro 105T features a low/mid flex point that produces a slightly higher trajectory. Its mid weight is ideal for the player seeking a versatile, lightweight steel shaft with good feel characteristics.
TITLEIST DIAMANA ‘ILIMA 70 HYB
Titleist ‘ilima 70HYB combines the MDI technology and active bend profile of Diamana ‘ilima with a specific torque for each flex. This results in a great feeling, lightweight shaft with higher launch/spin while matching a range of swing speeds.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TITLEIST DIAMANA KAI’LI 65
Titleist Kai’li 65 combines the MDI technology and med-firm bend profile of Diamana Kai’li with a specific torque for each flex. This results in a smooth feeling, stable lightweight shaft with mid launch/spin while matching a range of swing speeds.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TITLEIST DIAMANA KAI’LI 75
Titleist Kai’li 75 combines the MDI technology and med-firm bend profile of Diamana Kai’li with a specific torque for each flex. This results in a smooth feeling, stable mid-weight shaft with mid launch/spin while matching a range of swing speeds.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
PROJECT X TOUR ISSUE X-7A3
Project X Graphite Tour 7 features a hex-axial fiber reinforced butt sec-tion, a constant taper mid-section and a high modulus double wrapped tip. The resulting bend profile produces a penetrating ball flight with a low spin rate. This is a 70 gram, 7.0 flex.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
Project X Graphite Tour 7 features a hex-axial fiber reinforced butt section, a constant taper mid-section and a high modulus double wrapped tip. The resulting bend profile produces a penetrating ball flight with a low spin rate. This is a 70 gram, 6.5 flex.
The Kiyoshi 75 is an mid-weight shaft that uses a proprietary technology to improve torque control, bend points and stability. A medium/stiff bend profile and tip stiffness create a low/mid launching shaft with reduced spin.
PROJECT X TOUR ISSUE X-7B3
OBAN KIYOSHI 75
This Shaft Fits:
This Shaft Fits:
DRIVERS
DRIVERS
D
D
FAIRWAYS
FAIRWAYS
F
F
HYBRIDS
H
HYBRIDS
H
IRONS
I
IRONS
I
WEDGES
W
WEDGES
W
PROJECT X TOUR ISSUE X-7C3
Project X Graphite Tour 7 features a hex-axial fiber reinforced butt sec-tion, a constant taper mid-section and a high modulus double wrapped tip. The resulting bend profile produces a penetrating ball flight with a low spin rate. This is a 70 gram, 6.0 flex.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
PROJECT X TOUR ISSUE X-7D3
Project X Graphite Tour 7 features a hex-axial fiber reinforced butt sec-tion, a constant taper mid-section and a high modulus double wrapped tip. The resulting bend profile produces a penetrating ball flight with a low spin rate. This is a 70 gram, 5.5 flex.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
PROJECT X TOUR ISSUE X-8A4
Project X Graphite Tour 8 features a hex-axial fiber reinforced butt sec-tion, a constant taper mid-section and a high modulus double wrapped tip. The resulting bend profile produces a penetrating ball flight with a low spin rate. This is a 80 gram, 7.0 flex.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
PROJECT X FLIGHTED
Project X Flighted is a heavy, descending weight shaft. The mid flex point launches higher with more spin than regular Project X. Provides a different feel than constant weight shafts.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
PROJECT X TOUR ISSUE X-8B4
Project X Graphite Tour 8 features a hex-axial fiber reinforced butt sec-tion, a constant taper mid-section and a high modulus double wrapped tip. The resulting bend profile produces a penetrating ball flight with a low spin rate. This is a 80 gram, 6.5 flex.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
PROJECT X TOUR ISSUE X-8C4
Project X Graphite Tour 8 features a hex-axial fiber reinforced butt sec-tion, a constant taper mid-section and a high modulus double wrapped tip. The resulting bend profile produces a penetrating ball flight with a low spin rate. This is a 80 gram, 6.0 flex.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
PROJECT X TOUR ISSUE HB6 HYBRID
Project X HB6 Hybrid features the same construction as the driver shaft but with a bend profile to match the PX Steel iron shaft. This shaft provides a good performance transition between the PX Graphite driver and PX Steel iron shafts. This is a 95g, 7.0 flex.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
PROJECT X TOUR ISSUE HC1 HYBRID
Project X HC1 Hybrid features the same construction as the driver shaft but with a bend profile to match the PX Steel iron shaft. This shaft provides a good performance transition between the PX Graphite driver and PX Steel iron shafts. This is a 95g, 6.5 flex.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
PROJECT X TOUR ISSUE HD2 HYBRID
Project X HD2 Hybrid features the same construction as the driver shaft but with a bend profile to match the PX Steel iron shaft. This shaft provides a good performance transition between the PX Graphite driver and PX Steel iron shafts. This is a 90g, 6.0 flex.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
PROJECT X TOUR ISSUE HE6 HYBRID
Project X HE6 Hybrid features the same construction as the driver shaft but with a bend profile to match the PX Steel iron shaft. This shaft provides a good performance transition between the PX Graphite driver and PX Steel iron shafts. This is a 85g, 5.5 flex.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
PROJECT X
Project X is a mid/heavy, constant weight stepless shaft. The shorter tip section and longer taper rate create a stable, but not overly stiff tip. Offers good feel with a tight dispersion pattern.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TITLEIST SHAFTS 17
UST PROFORCE V2 57
UST Proforce V2 57 is an ultra-lightweight shaft for players seeking a penetrating ball flight and a mid launch angle with superior control. The Proforce V2 is very stable, consistent and offers control for larger club heads.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
18 TITLEIST SHAFTS
UST PROFORCE AXIVCORE TOUR BLACK 79
UST Proforce AXIVCore Tour Black 79 is a mid-weight counter-balanced shaft that produces a higher initial launch with lower spin. Lower torque than AXIVCore Blue to provide better control for the stronger player seeking a higher launch angle.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
UST PROFORCE AXIVCORE TOUR BLACK 100
UST Proforce AXIVCore Tour Black 100 uses a true weave, 4-axis material within the inner walls of the butt section that provides stability, excellent feel and consistent shaft recovery. This heavier weight utility shaft creates a medium launch angle and spin rate.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TRUE TEMPER DYNAMIC GOLD SENSICORE
True Temper Dynamic Gold with Sensicore is a heavy-weight steel shaft with a high flex point that produces a lower, penetrating trajectory with lower spin for control with greater vibration dampening characteristics for enhanced feel.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TRUE TEMPER DYNAMIC GOLD HL
True Temper Dynamic Gold High Launch features a mid flex point that offers greater carry distance with a medium trajectory. For the player seeking a mid-weight steel shaft with a higher ball flight and Dynamic Gold control and consistency.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TRUE TEMPER DYNAMIC GOLD SL
True Temper Dynamic Gold SL weighs 20% less than Dynamic Gold and features a high flex point and extra stiff tip for players seeking lower launch and spin with less weight. Works well for players who need longer length clubs near a standard swingweight.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TRUE TEMPER DYNAMIC GOLD TOUR ISSUE
True Temper Dynamic Gold Tour Issue shafts have a weight tolerance of +/- .5 grams for precision fitting. The shafts serialsed in sets of eight (3-PW) and are available in S400 and X100 flexes. Tour Issue shafts provide control and a penetrating ball flight similar to Dynamic Gold.
TRUE TEMPER DYNAMIC GOLD SPINNER
Dynamic Gold Spinner has been designed to increase spin on wedge and approach shots into the green. It uses a specially engineered section just beneath the grip to promote added spin for greater stopping power on the green.
This Shaft Fits:
This Shaft Fits:
DRIVERS
D
DRIVERS
D
FAIRWAYS
F
FAIRWAYS
F
HYBRIDS
HYBRIDS
H
H
IRONS
IRONS
I
I
WEDGES
WEDGES
W
W
UST ATTAS-T2 6
UST Attas-T2 6 incorporates Linear El technology. This uses precisely positioned high modulus prepreg along with reduced ply inserts to create a smoother bend profile and more efficient shaft loading. This lightweight shaft creates a medium/high launch and spin.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
UST PROFORCE AXIVCORE TOUR BLACK 69
UST Proforce AXIVCore Tour Black 69 is a lightweight counter-balanced shaft that produces a higher initial launch with lower spin. Lower torque than AXIVCore Blue to provide better control for the stronger player seeking a higher launch angle.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TRUE TEMPER DYNAMIC GOLD
True Temper Dynamic Gold is a heavy-weight steel shaft with a high flex point that produces a lower, penetrating trajectory with lower spin for control. This shaft is ideal for strong, high ball speed players seek-ing greater weight feedback with lower launch and spin.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
RIFLE
Rifle is a mid-heavy weight steel shaft that features a frequency matched, stepless design. Tight tolerances create a tighter shot dispersion, better control and greater distance for a wide range of players. Provides a different feel than constant weight shafts.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TRUE TEMPER DYNALITE GOLD SL
True Temper Dynalite Gold SL features a responsive tip which promotes a higher ball flight to optimise carry distance for lower ball hitters. With its lower overall weight, it offers the potential for higher ball speed, increased distance and less fatigue over the course of a round.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
TRUE TEMPER DYNALITE GOLD XP
True Temper Dynalite Gold XP features a responsive tip section that offers optimised launch angle and maximized distance. For the player seeking a light weight steel shaft with a mid ball flight and spin rate.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
UST PROFORCE V2 66
UST Proforce V2 66 is a light-weight shaft for players seeking a flatter, more penetrating ball flight with superior control. The Proforce V2 is very stable, consistent and offers control for larger club heads.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
UST PROFORCE V2 76
UST Proforce V2 76 is a mid-weight shaft for players seeking a flatter, more penetrating ball flight with superior control. For medium/fast tempo golfers with faster swing speeds looking for lower launch with lower spin.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
UST PROFORCE V2 86
UST Proforce V2 86 is a mid-heavy shaft for players seeking a flatter, more penetrating ball flight with superior control. Plays stiffer than similar flex shafts due to its low torque. For golfers with faster swing speeds looking for lower launch and spin while maintaining control.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
WHYBRIDS
UST PROFORCE V2 96
UST Proforce V2 96 is a heavy-weight shaft for players seeking a flatter ball flight with superior control. Plays stiffer than similar flex shafts due to its very low torque. For golfers with faster swing speeds looking for lower launch and spin while maintaining control.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
UST PROFORCE V2 HYBRID 89
UST Proforce V2 Hybrid 89 is a medium weight graphite utility shaft for players seeking a mid ball flight with superior control in their utility metals. Ideal for medium/fast tempo players looking for mid launch and slightly more weight feedback.
This Shaft Fits:
DRIVERS
DFAIRWAYS
FHYBRIDS
HIRONS
IWEDGES
W
UST PROFORCE V2 HYBRID 104
UST Proforce V2 Hybrid 104 is a heavier weight graphite utility shaft for players seeking a low/mid ball flight with superior control in their utility metals. Ideal for medium/fast tempo players looking for low/mid launch and extra weight feedback.
This Shaft Fits:
DRIVERS
DFAIRWAYS
F HIRONS
IWEDGES
W
TITLEIST 910 METALS ACCESSORIES 19
HYBRIDS
910 PRECISION WEIGHT KIT
The Precision Weight Kit features 5 weights (2g, 5g, 7g, 9g, 12g) and a weight holder to store the weights when not in use.
SKU #: TMF910WEIGHTKIT
SUREFIT™ TOUR WRENCH KIT
For complete information on how to properly use the SureFit™ Tour wrench when loosening or tightening the 910 hosel screw, players and fitters can utilise the Performance Guide and instructions included with the wrench kit or visit the Titleist website to view video tutorials.
SKU #: TMF910POUCHKIT
SureFit Tour Torque Wrench
SureFit Tour Wrench Pouch 910 Performance Guide & Instruction Manual
20 TITLEIST GRIPS
Surcharge Weight (g) .560 Core .580 Core .600 Core (Undersized)
.580 Core
GOLF PRIDE
1 Titleist Tour Velvet (New) No 55g, 52g, 50g, 44g
2 Titleist Tour Velvet Cord Yes 52.5g, 50.5g
3 Titleist Tour Velvet 360 (New) No 55g, 52g, 50g, 44g
4 Tour Velvet No 51.5g, 49.5g
5 Tour Velvet Ribbed No 51.5g, 49.5g
6 Tour Velvet BCT Cord Yes 52.5g, 50.5g
7 Tour Velvet BCT Cord Ribbed Yes 52.5g, 50.5g
8 Tour Velvet BCT Cord / Red Yes 50.5g
9 Tour Velvet BCT Cord / Blue Yes 50.5g
10 Decade Multi-Compound / Red Yes 46.5g
11 Decade Multi-Compound / Red Midsize Yes 59g
12 Decade Multi-Compound / White Yes 46.5g
13 Decade Multi-Compound / Blue Yes 46.5g
14 Decade Multi-Compound / Purple Yes 46.5g
15 Decade Multi-Compound / Orange Yes 46.5g
16 Decade Multi-Compound / Yellow Yes 46.5g
17 Decade Multi-Compound / Light Blue Yes 46.5g
18 Decade Multi-Compound / Green Yes 46.5g
19 Decade Multi-Compound / Patriot RWB Yes 46.5g
20 Dual Durometer Yes 50g
21 Dual Durometer Lite Yes 39g
22 V55 BCT Cord Yes 50.5g
23 V55 BCT Cord Ribbed Yes 50.5g
24 VDR Red Yes 50g
25 Tour Wrap 2G No 50g, 48g
26 Tour Wrap 2G Midsize No 58g
27 Tour Wrap 2G Red No 48g
28 Tour Wrap 2G White No 48g
LAMKIN
29 Crossline No 52g
30 Crossline Cord No 54g
31 N-Dur Black Yes 57g
32 N-Dur Red Yes 57g
33 N-Dur Blue Yes 57g
34 Performance Plus 3G No 59g
35 R.E.L. 3GEN No 52g
WINN
36 WinnLite Firm - White Yes 26g
37 WinnLite Firm - Black Yes 26g
38 WinnLite Firm - Blue (Midsize) Yes 28g
39 WinnLite Soft - Black Yes 25g
40 WinnLite Soft - Blue (Midsize) Yes 25g
41 WinnLite Soft - White (Undersize) Yes 20g
42 Excel Medium - Black Yes 42g
Custom grips are subject to availability and may require additional lead time.
Information subject to change.
TITLEIST GRIPS 21
GOLF PRIDE
LAMKIN WINN
LAMKIN
GOLF PRIDE
GOLF PRIDE
1
12
23
34
5
16
27
38
3
14
25
36
7
18
29
40
10
21
32
2
13
24
35
6
17
28
39
9
20
31
42
4
15
26
37
8
19
30
41
11
22
33
Baby T Black
Baby T Red
Studio DesignBlack
StudioDesign
Red
WinnAVS
Midsize
CameronCordBlack
CameronCord Red
CameronNo-Cord
Black
CameronPistolero
Black
KombiSplitGrip
22 SCOTTY CAMERON PUTTER GRIPS
Custom grips are subject to availability and may require additional lead time.
Information subject to change.
BV Black Cowboy Orange Key Lime Oceanside Blue
White Out Wings of Gold Irish Green Purple Haze
TVD Red Cerveza Yellow Carolina Blue Pink Ribbon
VOKEY DESIGN PERSONALISATION
Characters Available Letters A - Z (all caps) / Numbers 0 - 9
Character Limit Up to 4 characters for straight / freestyle
Stamping Style Straight / Freestyle
Paintfill Colors
PERSONALISE YOUR VOKEY DESIGN WEDGESVokey Design wedges can be personalised through our in house stamping program. Choose tour-inspired, hand-stamped initials in straight or freestyle configuration across a range of 12 colours. Please note that an upcharge applies for stamping personalisation.
Straight Stamp
Freestyle Stamp
VOKEY DESIGN PERSONALISATION 23
ACUSHNET EUROPE LTDCaxton Road, St IvesCambs PE27 3LUwww.titleist.co.uk
