2013-14 Chain Drives

Chai

n Dr

ives

Chain Drives

08

08

190

191Contact Brammer on 0870 240 2100 Chain Drives 191

18

Chai

n Dr

ives

™High Performance

Premier Standard

Renold Transmission Chain

Maintenance Free

Corrosion Resistant

Corrosion Resistant

Abrasion Resistant

Chain Tensioner

Stainless Steel

Hydro-Service™

Sovereign™

Roll-Ring™

All Purpose Chain

192192

8

Chai

n Dr

ives

BS

CH

AIN

SIZ

ES

Improved fatigue resistance

Plate and connecting link designoptimizes stress distribution andfatigue performance. Synergy®performs, on average, 30 percentbetter than other brands underrepeated shock loading and continual heavy loads.

Better wear resistance

Independent tests show RenoldSynergy® performed up to six timesbetter than the highest qualitycompetitor’s chain.

Built to perform

Each component of Renold Synergy® is engineered to perfection usingcutting edge design tools such as Finite Element Analysis (FEA). It alladds up to chain performance thatexceeds the sum of its parts.

� Unique high performance chain

� Up to 6 times longer working life

� Unbeatable wear and fatigue resistance

� Designed to deliver maximum return

� Initial wear life improved by 50%

S11/S58 S26

S107 S12

S30

Brammer BS Order Code

ISONo.

Pitchinch

Connecting links

26 107 11 12 30

110038X10FT:REN 06B-1 0.375 � � - - �

110046X10FT:REN 08B-1 0.500 � � - - �

110056X10FT:REN 10B-1 0.625 � � - - �

110066X10FT:REN 12B-1 0.750 � � - - �

110088X10FT:REN 16B-1 1.000 � � - � -110106X10FT:REN 20B-1 1.250 � � - � -110127X10FT:REN 24B-1 1.500 - � � � -


ISONo.

Pitchinch

Connecting links

26 107 11 12 30

114038X10FT:REN 06B-2 0.375 � � - - �

114046X10FT:REN 08B-2 0.500 � � - - �

114056X10FT:REN 10B-2 0.625 � � - - �

114066X10FT:REN 12B-2 0.750 � � - - �

114088X10FT:REN 16B-2 1.000 � � - � -114106X10FT:REN 20B-2 1.250 � � - � -114127X10FT:REN 24B-2 1.500 - � � � -

Simplex

Duplex

BS CHAIN SIZES

Everything you need – when you need it – Tel: 0870 240 2100


18

Chai

n Dr

ives

AN

SI C

HA

IN S

IZES

Improved fatigue resistance

Plate and connecting link designoptimizes stress distribution andfatigue performance. Synergy®performs, on average, 30 percentbetter than other brands underrepeated shock loading and continual heavy loads.

Better wear resistance

Independent tests show RenoldSynergy® performed up to six timesbetter than the highest qualitycompetitor’s chain.

Built to perform

Each component of Renold Synergy® is engineered to perfection usingcutting edge design tools such as Finite Element Analysis (FEA). It alladds up to chain performance thatexceeds the sum of its parts.

� Unique high performance chain

� Up to 6 times longer working life

� Unbeatable wear and fatigue resistance

� Designed to deliver maximum return

� Initial wear life improved by 50%

S11/S58 S26

S107 S12

S30

Brammer ANSI Order Code

ANSINo.

Pitchinch

Connecting links

26 107 11 12 30

129037X10FT:REN 35-1 0.375 � � - � �

119047X10FT:REN 40-1 0.500 � � � � �

119057X10FT:REN 50-1 0.625 � � � � �

119067X10FT:REN 60-1 0.750 � � � � �

119087X10FT:REN 80-1 1.000 - � � � -119107X10FT:REN 100-1 1.250 - � � � -119127X10FT:REN 120-1 1.500 - � � � -


ANSINo.

Pitchinch

Connecting links

26 107 11 12 30

125037X10FT:REN 35-2 0.375 � � - � �

115047X10FT:REN 40-2 0.500 � � � � �

115057X10FT:REN 50-2 0.625 � � � � �

115067X10FT:REN 60-2 0.750 � � � � �

115087X10FT:REN 80-2 1.000 - � � � -115107X10FT:REN 100-2 1.250 - � � � -115127X10FT:REN 120-2 1.500 - � � � -

Simplex

Duplex

ANSI CHAIN SIZES

194194

8

Chai

n Dr

ives

BS

CH

AIN

SIZ

ES S11/S58 S26

S107 S12

S30

Renold’s unique control over pin / bushcontact makes sure that wear lifeexceeds other brands. Little initialchain adjustment is therefore required.Renold roller chain is highly fatigueresistant, giving up to four times the

life of other leading competitor chains.Breaking loads exceed the minimumrequirements of the internationalstandards.

Renold’s end-softened pin and spinrivet help to minimise downtime. All

you need is a Renold pin extractor andyou can disassemble Renold rollerchain in seconds; no need to grind thehead of the pin, no need for lengthydowntime.

� Our leading standard steel transmission chain

� Excellent wear resistance

� Wide waisted GP plate shape

� Fatigue performance rated as ISO + 60%

� Guarantee of 15,000 hours

� End-softened, spin riveted pin for easy cutting

� 3/8” to 4” pitch, simplex & duplex


ISONo.

Pitchinch

Connecting links

26 107 11 12 30

06B-1x10FT:REN 06B-1 0.375 � � - - �

08B-1x10FT:REN 08B-1 0.500 � � - - �

10B-1x10FT:REN 10B-1 0.625 � � - - �

12B-1x10FT:REN 12B-1 0.750 � � - - �

16B-1x10FT:REN 16B-1 1.000 � � - � -20B-1x10FT:REN 20B-1 1.250 � � - � -24B-1x10FT:REN 24B-1 1.500 - � � � -


ISONo.

Pitchinch

Connecting links

26 107 11 12 30

06B-2x10FT:REN 06B-2 0.375 � � - - �

08B-2x10FT:REN 08B-2 0.500 � � - - �

10B-2x10FT:REN 10B-2 0.625 � � - - �

12B-2x10FT:REN 12B-2 0.750 � � - - �

16B-2x10FT:REN 16B-2 1.000 � � - � -20B-2x10FT:REN 20B-2 1.250 � � - � -24B-2x10FT:REN 24B-2 1.500 - � � � -

Simplex

Duplex

BS CHAIN SIZES

Nationwide coverage, delivered locally same or next day – Tel: 0870 240 2100


18

Chai

n Dr

ives

AN

SI C

HA

IN S

IZES S11/S58 S26

S107 S12

S30

Renold’s unique control over pin / bushcontact makes sure that wear lifeexceeds other brands. Little initialchain adjustment is therefore required.Renold roller chain is highly fatigueresistant, giving up to four times the

life of other leading competitor chains.Breaking loads exceed the minimumrequirements of the internationalstandards.

Renold’s end-softened pin and spinrivet help to minimise downtime. All

you need is a Renold pin extractor andyou can disassemble Renold rollerchain in seconds; no need to grind thehead of the pin, no need for lengthydowntime.

� Our leading standard steel transmission chain

� Excellent wear resistance

� Wide waisted GP plate shape

� Fatigue performance rated as ISO + 60%

� Guarantee of 15,000 hours

� End-softened, spin riveted pin for easy cutting

� 3/8” to 4” pitch, simplex & duplex


ANSINo.

Pitchinch

Connecting links

26 107 11 12 30

35-1X10FT:REN 35-1 0.375 � � - - �

40-1X10FT:REN 40-1 0.500 � � - � �

50-1X10FT:REN 50-1 0.625 � � � � �

60-1X10FT:REN 60-1 0.750 � � - � �

80-1X10FT:REN 80-1 1.000 � � � � �

100-1X10FT:REN 100-1 1.250 � � � � �

120-1X10FT:REN 120-1 1.500 - � � � -


ANSINo.

Pitchinch

Connecting links

26 107 11 12 30

35-2X10FT:REN 35-2 0.375 � � - - �

40-2X10FT:REN 40-2 0.500 � � - � �

50-2X10FT:REN 50-2 0.625 � � � � �

60-2X10FT:REN 60-2 0.750 � � � � �

80-2X10FT:REN 80-2 1.000 � � � � �

100-2X10FT:REN 100-2 1.250 - � � � -120-2X10FT:REN 120-2 1.500 - � � � -

Simplex

Duplex

ANSI CHAIN SIZES

196196

8

Chai

n Dr

ives

BS

CH

AIN

SIZ

ES S11/S58 S26

S107 S12

S30

Renold A&S Roller Chain

Renold A&S roller chain has long beenrecognised for its high quality andaffordable reliability. It has earned astrong reputation for its excellent wearresistance, high fatigue resistance anddurability and these factors havehelped A&S become the most widelyused chain brand in Europe.

More than just a chain

With its reliability and performance,A&S roller chain significantlycontributes to reduced downtime andmaintenance and has the ability tomeet the needs of diverse applicationsand the continuously increasingdemands of industry. To make sure thatA&S chain keeps up with these

increasing demands, a series ofupgrades ensure that the range nowoffers even more performancebenefits. Available in European (BS)and ANSI standard, A&S chain isavailable with a choice of lubricant tomeet customer’s specific requirements.

� Solid extruded bush

� Solid extruded roller

� High waisted plates

� Wedge riveting

� Hardened and shot-peened plates

� Comprehensive European (BS) and ANSIstandard ranges


ISONo.

Pitchinch

Connecting links

26 107 11 12 30

06B-1X10FT:AS 06B-1 0.375 � � - - �

08B-1X10FT:AS 08B-1 0.500 � � - - �

10B-1X10FT:AS 10B-1 0.625 � � - - �

12B-1X10FT:AS 12B-1 0.750 � � - - �

16B-1X10FT:AS 16B-1 1.000 � � - � -20B-1X10FT:AS 20B-1 1.250 � � - � -24B-1X10FT:AS 24B-1 1.500 - � � � -


ISONo.

Pitchinch

Connecting links

26 107 11 12 30

06B-2X10FT:AS 06B-2 0.375 � � - - �

08B-2X10FT:AS 08B-2 0.500 � � - - �

10B-2X10FT:AS 10B-2 0.625 � � - - �

12B-2X10FT:AS 12B-2 0.750 � � - - �

16B-2X10FT:AS 16B-2 1.000 � � - � -20B-2X10FT:AS 20B-2 1.250 � � - � -24B-2X10FT:AS 24B-2 1.500 - � � � -

Simplex

Duplex

BS CHAIN SIZES

90 Brammer Sales & Service Centres nationwide – Tel: 0870 240 2100


18

Chai

n Dr

ives

S11/S58 S26

S107 S12

S30

Renold A&S Roller Chain

Renold A&S roller chain has long beenrecognised for its high quality andaffordable reliability. It has earned astrong reputation for its excellent wearresistance, high fatigue resistance anddurability and these factors havehelped A&S become the most widelyused chain brand in Europe.

More than just a chain

With its reliability and performance,A&S roller chain significantlycontributes to reduced downtime andmaintenance and has the ability tomeet the needs of diverse applicationsand the continuously increasingdemands of industry. To make sure thatA&S chain keeps up with these

increasing demands, a series ofupgrades ensure that the range nowoffers even more performancebenefits. Available in European (BS)and ANSI standard, A&S chain isavailable with a choice of lubricant tomeet customer’s specific requirements.

� Solid extruded bush

� Solid extruded roller

� High waisted plates

� Wedge riveting

� Hardened and shot-peened plates

� Comprehensive European (BS) and ANSIstandard ranges


ANSINo.

Pitchinch

Connecting links

26 107 11 12 30

35-1X10FT:AS 35-1 0.375 � � - - �

40-1X10FT:AS 40-1 0.500 � � - - �

50-1X10FT:AS 50-1 0.625 � � - - �

60-1X10FT:AS 60-1 0.750 � � � � �

80-1X10FT:AS 80-1 1.000 � � � � �

100-1X10FT:AS 100-1 1.250 - � � � -120-1X10FT:AS 120-1 1.500 - � � � -


ANSINo.

Pitchinch

Connecting links

26 107 11 12 30

35-2X10FT:AS 35-2 0.375 � � - - �

40-2X10FT:AS 40-2 0.500 � � - - �

50-2X10FT:AS 50-2 0.625 � � - - �

60-2X10FT:AS 60-2 0.750 � � � � �

80-2X10FT:AS 80-2 1.000 � � � � �

100-2X10FT:AS 100-2 1.250 - � � � -120-2X10FT:AS 120-2 1.500 - � � � -

Simplex

Duplex

AN

SI C

HA

IN S

IZES

ANSI CHAIN SIZES

198198

8

Chai

n Dr

ives

BS

CH

AIN

SIZ

ES S11/S58 S26

S107 S12

S30

For use in hygiene-sensitive applications or situations where contamination fromlubricant is to be avoided, Renold Synochain displays all the characteristics youneed from a chain. With a food industry-approved lubricant within the sinteredbush, this chain will in almost all instancesnot need relubricating. The roller coating isalso suitable for use in the food industry; aunique feature on any chain.

Available in boxed 10-foot lengths from06B to 24B and ANSI 40 to ANSI 100,simplex and duplex with a standard pindiameter, this means that Renold Synochain is dimensionally interchangeablewith standard roller chain and is evencompatible with standard sprockets.

With the kind of excellent wear and fatigueresistance that you expect from a Renold

chain, Syno chain outlasts any competitorproduct promoted as low-lube or non-lube.

Already tried and tested by majorcompanies in the food sector andelsewhere, if you have to operate withminimal lubrication but can’t compromiseon performance, we can boost yourproductivity, cut your downtime and saveyou time and money.

� No lubrication normally required

� Outside of chain totally dry-to-the-touch

� Nickel-plated plates

� Food industry-approved lubricant within sintered bush

� Unique food industry-approved roller coating

� Dimensionally interchangeable with standard chain

� ISO standard pin diameter, therefore standardattachments on outer links


ISONo.

Pitchinch

Connecting links

26 107 11 12 30

110438X10FT:REN 06B-1 0.375 � � - - �

110446X10FT:REN 08B-1 0.500 � � � - �

110456X10FT:REN 10B-1 0.625 � � � - �

110466X10FT:REN 12B-1 0.750 � � � - �

110488X10FT:REN 16B-1 1.000 � � � � �

110506X10FT:REN 20B-1 1.250 � � � � �

110527X10FT:REN 24B-1 1.500 - � � � �


ISONo.

Pitchinch

Connecting links

26 107 11 12 30

114438X10FT:REN 06B-2 0.375 � � � - �

114446X10FT:REN 08B-2 0.500 � � � - �

114456X10FT:REN 10B-2 0.625 � � � - �

114466X10FT:REN 12B-2 0.750 � � � - �

114488X10FT:REN 16B-2 1.000 � � - � �

114506X10FT:REN 20B-2 1.250 � � � � �

114527X10FT:REN 24B-2 1.500 - � � � �

Simplex

Duplex

BS CHAIN SIZES

We work harder to save you money and downtime – Tel: 0870 240 2100


18

Chai

n Dr

ives

AN

SI C

HA

IN S

IZES S11/S58 S26

S107 S12

S30

For use in hygiene-sensitive applications or situations where contamination fromlubricant is to be avoided, Renold Synochain displays all the characteristics youneed from a chain. With a food industry-approved lubricant within the sinteredbush, this chain will in almost all instancesnot need relubricating. The roller coating isalso suitable for use in the food industry; aunique feature on any chain.

Available in boxed 10-foot lengths from06B to 24B and ANSI 40 to ANSI 100,simplex and duplex with a standard pindiameter, this means that Renold Synochain is dimensionally interchangeablewith standard roller chain and is evencompatible with standard sprockets.

With the kind of excellent wear and fatigueresistance that you expect from a Renold

chain, Syno chain outlasts any competitorproduct promoted as low-lube or non-lube.

Already tried and tested by majorcompanies in the food sector andelsewhere, if you have to operate withminimal lubrication but can’t compromiseon performance, we can boost yourproductivity, cut your downtime and saveyou time and money.

� No lubrication normally required

� Outside of chain totally dry-to-the-touch

� Nickel-plated plates

� Food industry-approved lubricant within sintered bush

� Unique food industry-approved roller coating

� Dimensionally interchangeable with standard chain

� ISO standard pin diameter, therefore standardattachments on outer links


ANSINo.

Pitchinch

Connecting links

26 107 11 12 30

119443X10FT:REN 40-1 0.500 � � � - �

119453X10FT:REN 50-1 0.625 � � � - �

119463X10FT:REN 60-1 0.750 � � � � �

119483X10FT:REN 80-1 1.000 - � - � �


ANSINo.

Pitchinch

Connecting links

26 107 11 12 30

115443X10FT:REN 40-2 0.500 � � � - �

115453X10FT:REN 50-2 0.625 � � � - �

115463X10FT:REN 60-2 0.750 � � � � �

115483X10FT:REN 80-2 1.000 - � � � �

Simplex

Duplex

ANSI CHAIN SIZES

200200

8

Chai

n Dr

ives

BS

CH

AIN

SIZ

ES S11/S58 S26

S107 S12

S30

Renold Hydro-Service chain deliverssuperior corrosion resistance, lasting asmuch as 30 times longer than standardcarbon steel in applications that haveto deal with water or salt spray. It isideal for wash-down environments.

Hydro-Service chain is also moreeconomical, and stronger, thanstainless steel.

Each component is mechanicallytreated prior to assembly to ensure

consistent, secure protection. Thesurface treatment is free of hexavalentchrome, complying with legislationrelating to environmental and health &safety considerations.


ISONo.

Pitchinch

Connecting links

26 107 11 12 30

06B-1HSx10FT:REN 06B-1 0.375 � � - - �

08B-1HSx10FT:REN 08B-1 0.500 � � - - �

10B-1HSx10FT:REN 10B-1 0.625 � � - - �

12B-1HSx10FT:REN 12B-1 0.750 � � - - �

16B-1HSx10FT:REN 16B-1 1.000 � � - � -20B-1HSx10FT:REN 20B-1 1.250 � � - � -24B-1HSx10FT:REN 24B-1 1.500 - � � � -


ISONo.

Pitchinch

Connecting links

26 107 11 12 30

06B-2HSx10FT:REN 06B-2 0.375 � � - - �

08B-2HSx10FT:REN 08B-2 0.500 � � - - �

10B-2HSx10FT:REN 10B-2 0.625 � � - - �

12B-2HSx10FT:REN 12B-2 0.750 � � - - �

16B-2HSx10FT:REN 16B-2 1.000 � � - � -20B-2HSx10FT:REN 20B-2 1.250 � � - � -24B-2HSx10FT:REN 24B-2 1.500 - � � � -

Simplex

Duplex

� Superior corrosion resistance

� Last as much as 30 times longer than standard carbon steel

� Hexavalent chrome free

� 350 hours corrosion protection during salt spray tests to DIN 50021

� Cold extruded, solid bush and roller delivering maximum Renold performance

� Plates and rollers shot peened to our exact specifications

� Wear and fatigue resistance that delivers maximum working life

� Lubrication that improves wear performance

Renold Hydro-Service®

Superior corrosion resistance for chain

BS CHAIN SIZES

FREE 24/7 technical support – Tel: 0870 240 2100


18

Chai

n Dr

ives

AN

SI C

HA

IN S

IZES S11/S58 S26

S107 S12

S30

Renold Hydro-Service chain deliverssuperior corrosion resistance, lasting asmuch as 30 times longer than standardcarbon steel in applications that haveto deal with water or salt spray. It isideal for wash-down environments.

Hydro-Service chain is also moreeconomical, and stronger, thanstainless steel.

Each component is mechanicallytreated prior to assembly to ensure

consistent, secure protection. Thesurface treatment is free of hexavalentchrome, complying with legislationrelating to environmental and health &safety considerations.

� Superior corrosion resistance

� Last as much as 30 times longer than standard carbon steel

� Hexavalent chrome free

� 350 hours corrosion protection during salt spray tests to DIN 50021

� Cold extruded, solid bush and roller delivering maximumRenold performance

� Plates and rollers shot peened to our exact specifications

� Wear and fatigue resistance that delivers maximum working life

� Lubrication that improves wear performance

Renold Hydro-Service®

Superior corrosion resistance for chain


ANSINo.

Pitchinch

Connecting links

26 107 11 12 30

35-1HSx10FT:REN 35-1 0.375 - � - - �

40-1HSx10FT:REN 40-1 0.500 � � - - �

50-1HSx10FT:REN 50-1 0.625 � � � - �

60-1HSx10FT:REN 60-1 0.750 � � � - �

80-1HSx10FT:REN 80-1 1.000 � � � - �

100-1HSx10FT:REN 100-1 1.250 � � � � -120-1HSx10FT:REN 120-1 1.500 � � � � -


ANSINo.

Pitchinch

Connecting links

26 107 11 12 30

06B-2HSx10FT:REN 35-2 0.375 - � - - �

08B-2HSx10FT:REN 40-2 0.500 � � - - �

35-2HSx10FT:REN 50-2 0.625 � � � - �

40-2HSx10FT:REN 60-2 0.750 � � � - �

50-2HSx10FT:REN 80-2 1.000 � � � - �

60-2HSx10FT:REN 100-2 1.250 � � � � -80-2HSx10FT:REN 120-2 1.500 � � � � -

Simplex

Duplex

ANSI CHAIN SIZES

202202

8

Chai

n Dr

ives

The Innovative Tensioner

The innovative prize winning Roll-Ring chain tensioner is based onnew principles and represents a majoradvance in technology.

Roll-Ring is an innovative chaintensioner made from a speciallyformulated polymer. The unique designis based upon a toothed ring that canbe fitted to horizontal, vertical ordiagonal drives in a matter of seconds,simply by placing it in-between thetwo strands of chain.

When the drive is in use, the Roll-Ringdeforms to an elliptical shape, due tothe compression between the strandsand completely absorbs any slack inthe system. Roll-Ring performs the jobof a tensioner and a damper in one,and is ideally suited to applicationswhere maintenance is difficult orimpossible.

� Revolutionary chain tensioner

� Installed in seconds and self adjusting

� Maintenance free

� Works on simplex, duplex & triplex chain

� Available in a wide range of pitch sizes

� Also acts as noise damper

Part No. ISO No. Teeth

105 030 01 ISO 05 30

106 030 01 ISO 06 30

106 036 01 ISO 06 36

108 026 01 ISO 08 26

108 030 01 ISO 08 30

108 034 01 ISO 08 34

108 430 01 * 30

110 026 01 ISO 10 26

110 030 01 ISO 10 30

110 034 01 ISO 10 34

112 026 01 ISO 12 26

112 030 01 ISO 12 30

112 034 01 ISO 12 34

116 026 01 ISO 16 26

116 030 01 ISO 16 30

120 030 01 ISO 20 30


106 030 06 ISO 06 30

108 026 06 ISO 08 26

108 030 06 ISO 08 30

108 430 06 * 30

110 026 06 ISO 10 26

110 030 06 ISO 10 30

112 026 06 ISO 12 26

112 030 06 ISO 12 30

116 026 06 ISO 16 26

116 030 06 ISO 16 30


106 030 08 ISO 06 30

108 026 08 ISO 08 26

108 030 08 ISO 08 30

108 430 08 * 30

110 026 08 ISO 10 26

110 030 08 ISO 10 30

112 026 08 ISO 12 26

112 030 08 ISO 12 30

116 026 08 ISO 16 26

116 030 08 ISO 16 30

BS CHAIN SIZES

Roll-Ring®

Chain Tensioner

BS

CH

AIN

SIZ

ES



18

Chai

n Dr

ives

The Innovative Tensioner

The innovative prize winning Roll-Ring chain tensioner is based onnew principles and represents a majoradvance in technology.

Roll-Ring is an innovative chaintensioner made from a speciallyformulated polymer. The unique designis based upon a toothed ring that canbe fitted to horizontal, vertical ordiagonal drives in a matter of seconds,simply by placing it in-between thetwo strands of chain.

When the drive is in use, the Roll-Ringdeforms to an elliptical shape, due tothe compression between the strandsand completely absorbs any slack inthe system. Roll-Ring performs the jobof a tensioner and a damper in one,and is ideally suited to applicationswhere maintenance is difficult orimpossible.

� Revolutionary chain tensioner

� Installed in seconds and self adjusting

� Maintenance free

� Works on simplex, duplex & triplex chain

� Available in a wide range of pitch sizes

� Also acts as noise damper


106 030 01 ISO 35 30

108 026 01 ISO 40 30

108 030 01 ISO 40 30

108 034 01 ISO 40 30

108 430 01 * 30

110 026 01 ISO 50 30

110 030 01 ISO 50 30

110 034 01 ISO 50 30

112 026 01 ISO 60 30

112 030 01 ISO 60 30

112 034 01 ISO 60 30

116 026 01 ISO 80 30

116 030 01 ISO 80 30

120 030 01 ISO 100 30


106 030 06 ISO 35 30

108 026 06 ISO 40 26

108 030 06 ISO 40 30

108 430 06 * 30

110 026 06 ISO 50 26

110 030 06 ISO 50 30

112 026 06 ISO 60 26

112 030 06 ISO 60 30

116 026 06 ISO 80 26

116 030 06 ISO 80 30


106 030 08 ISO 35 30

108 026 08 ISO 40 26

108 030 08 ISO 40 30

108 430 08 * 30

110 026 08 ISO 50 26

110 030 08 ISO 50 30

112 026 08 ISO 60 26

112 030 08 ISO 60 30

116 026 08 ISO 80 26

116 030 08 ISO 80 30

ANSI CHAIN SIZES

Roll-Ring®

Chain Tensioner

AN

SI C

HA

IN S

IZES

204204

8

Chai

n Dr

ives

• Fast availability of standard integral attachments

• Standard cast iron sprocketsavailable ex-stock

• Supporting this standard range we also have the capability to supply specials and custom-designed products.

Standard stock range of BS conveyor

chain, available ex-stock. 3,000

to 30,000lb chains produced in our

dedicated UK manufacturing cell.

Renold Conveyor Chain



18

Chai

n Dr

ives

A GROUP OVERVIEWTHE COMPREHENSIVE POWER TRANSMISSION PRODUCTS PROVIDER

Services & Exclusive Technologies• Technical support helpline - Advice on selection, calculations based on your application• Online chain selector• Onsite technical advice - Installation assistance / supervision• SmartProducts: unique wear and load monitoring

technology exclusive to Renold• Roll-Ring chain tensioner, fit it in seconds• Attachment chain service - Quick turnaround, wide range of stock attachments• Online training information and guidance

Design and Manufacturing Expertise• The ability to respond to individual customer needs

with bespoke designs• An unrivalled depth of knowledge and experience

in chain manufacturing

Comprehensive Range • Market-leading range of standard chain• Solution products designed with application and

environmental requirements in mind – see the product listing opposite.

Chain Gears Couplings

See How to Cut Chain Easilywww.renoldpinextractor.com

Check out our Chain Selectorwww.renoldchainselector.com

206206

8

Chai

n Dr

ives

Tsubakimoto is the world’s

premier manufacturer of

power transmission products

including high quality ANSI

and BS roller, conveyor and

engineering chains and

associated products such

as cam clutches and linear

actuators. It spends more

on R&D than any other chain

manufacturer in the world

and offers the highest levels

of engineering in all of its

products.

Tsubaki believes that reliability is the key to productivity and profitability, which is why it manufactures chain which is designed

to outperform the competition in even the harshest of industrial environments. This meets its Eco Eco philosophy of offering economical and ecological benefits to its customers with every single sale.

The company has a global network of production and storage facilities which all operate on a policy of economical and ecological efficiency. This is most notable in its flagship Kyotanabe Plant in Japan which is responsible for developing new chain technologies and manufacturing product for distribution globally.

Tsubaki aims to be a leading company in the global markets for its products and plans to achieve this through excellence in manufacturing for customers around the world. It offers the best value to customers around the world by capitalising on its technical strengths in power transmission products and material handling systems.



18

Chai

n Dr

ives

CS

Start your product

selection here

Roller Chain Guide

Chain: GT4 WINNER is the most advanced chain in the European market. Unique features are solid bushing with lubrication grooves, ring coined connecting links, and centre sink pin for easy dissassembly.

Typical applications: Suitable for all general applications.

Limitations: Application specific, please contact Tsubaki *

Chain: Tsubaki is the pioneer in developing lube free chain. Lambda features an oil impregnated bush in combination with a special coated pin for long-term internal lubrication is the secret to Lambda’s economic long life and wear resistance. This chain also comes with our standard features such as ring coined connecting links and easy break style pin head.

Typical applications: Food, Packaging, Printing, Sawmill, Textile.

Limitations: Max. Temp. 150degC, Max. Speed 50-160m/min *

Chain: Tsubaki G7 ANSI chain features the same benefits as our BS GT4 WINNER chain such solid bushing and lube grooves to increase chain life by reducing wear. The G7 chain also offers an increased kW rating.

Typical applications: Suitable for all general applications.


Chain: Plastic combination chain uses a stainless steel outer link, and a resilient plastic inner link to reduce weight and improve wear life without lubrication. A clean and long lasting alternative to stainless steel chain.

Typical applications: Food, Pharmaceutical, Packaging, Healthcare.

Limitations: Max. Temp. range -20 to 80degC, Max. Speed 70m/min.

Chain: Tsubaki NEP chain is coated to give high corrosion protection to carbon steel chain. The chain is eco-friendly and meets RoHS requirements, whilst maintaining 100% the strength of the chain.

Typical applications: Food, Packaging, Utilities.


Chain: Plastic combination chain uses a stainless steel outer link, and a resilient plastic inner link to reduce weight and improve wear life without lubrication. A clean and long lasting alternative to stainless steel chain.

Typical applications: Food, Packaging, Utilities.

Limitations: Avoid heavy water contact.

LAMBDA N.E.P.

Chain: Tsubaki Heavy and SUPER series chains offer increased transmission capacity, whilst remaining compatible with ANSI standard sprockets. Special treatments such as ball drifting, quad riveting, and shot peening are used to increase fatigue resistance.

Typical applications: Lifting, construction and aggregate industries.


Heavy & SUPER SeriesChain: Tsubaki leads the stainless steel chain range with our standard SUS304 grade, a higher transmission capacity is achieved by our precipitation hardened AS grade, and special SUS316 NS grade offers the highest corrosion resistance in stainless steel chains.

Typical applications: Food, Packaging, Medical.

Limitations: Lower transmission capacity than equivalent steel chain.

Stainless Steel Chain

Coated Steel or Stainless Steel

Chain?

Do you require corrosion

resistance?

Are you able to lubricate?

Do you require corrosion

resistance?

Coated Steel or Stainless Steel

Chain?

Roller Chain Attachment Chain

* Contact Tsubaki as the application requires further investigation.

CS

YesNoYesYesSS

No No SS

ANSI

Need more capacity?

208208

8

Chai

n Dr

ives

TSUBAKI GT4 Winner: Standard Roller Chain

TSUBAKI, the world’s

largest and most advanced

manufacturer of chain has

released a new 4th generation

BS/DIN standard roller

chain. The latest generation

chain, branded Tsubaki GT4

Winner hosts a number of

manufacturing and material

developments.

Repeated testing and field data indicate that wear between the bearing parts is a primary limiting factor in overall chain life, particularly in externally lubricated chain types such as BS/DIN standard roller chain. TSUBAKI has committed significant amounts of research and development to making improvements in this area, to reduce wear and chain elongation over a longer period of time-even for standard drive roller chain.

Four Key Features

1. Pre Lubrication Lube Groove (LG)TSUBAKI’s new BS/DIN series roller chain utilise a new production technique to manufacture a seamless bush with grooves incorporated on the inner surface. The lube-grooved (LG) bush holds oil at the point of contact where the chain needs it most, providing an internal reservoir for lubricant. The result is a chain that lasts longer with lower maintenance costs over the lifetime of the chain.

2. Seamless Bush > Perfectly CylindricalThe new Tsubaki BS/DIN series chain has a seamless bush with a very precise cylindrical profile and surface finish resulting in better surface contact between the pin and bush along with improved lubricant retention.

3. Easy dis-assembly > Centre Sink RivetWith Tsubaki’s design of rivet head the chain is easily dis-assembled with an additional benefit being that in the event of the chain being overloaded, the markings on the rivet head will identify pin rotation.

4. Increased Transmission Capacity > Ring CoiningThe Ring Coined connecting link allows the chain to be specified up to its full kW rating. The precision and strength achieved on these components is far beyond that of competitor’s offerings. The typical standard slip-fit connecting link is usually much weaker than the other links. Tsubaki’s Ring Coin technology has overcome that.

CO2 Reduction

Tsubaki takes its environmental responsibility very seriously in its state-of-the-art production facilities. The new BS/DIN series chain contributes significantly to reducing CO2 emissions due to the greatly extended replacement frequency.



18

Chai

n Dr

ives

L2

L1

d2 d1

p

H

T

t

p

b1

d2 d1

T

b1

L2

L1 t

pt

d2 d1

T

b1 L2

L1

t pt

pt

OL

L

L1

L1

2POL

05B-1:TSUB05B-2:TSUB05B-3:TSUB06B-1:TSUB06B-2:TSUB06B-3:TSUB08B-1:TSUB08B-2:TSUB08B-3:TSUB10B-1:TSUB10B-2:TSUB10B-3:TSUB12B-1:TSUB12B-2:TSUB12B-3:TSUB16B-1:TSUB16B-2:TSUB16B-3:TSUB20B-1:TSUB20B-2:TSUB20B-3:TSUB24B-1:TSUB24B-H-1:TSUB24B-2:TSUB24B-3:TSUB28B-1:TSUB28B-2:TSUB28B-3:TSUB32B-1:TSUB32B-2:TSUB32B-3:TSUB40B-1:TSUB40B-2:TSUB40B-3:TSUB48B-1:TSUB48B-2:TSUB48B-3:TSUB

210210

8

Chai

n Dr

ives

Special Coated PinSpecial Oil ImpregnatedSintered Bush

Ring Coining

Roller

Lambda Lube Free Roller Chain

Tsubaki’s Lambda Chains were the first in the industry to use a special oil-impregnated bush. Since their launch in 1988, they have been adopted for diverse industries and applications, and their performance has been highly rated. Tsubaki has a wide line-up of lube-free, long life products that help customers reduce costs.

Technical EvolutionAs a pioneer in the lube-free chain market, Tsubaki will reveal some of the key elements behind Lambda’s outstanding performance:

Sintered BushA special oil-impregnated sintered bush in combination with a special coated pin for long-term internal lubrication is the secret of Tsubaki Lambda’s long economic life and wear resistance.

Easy CuttingBS Lambda chain can be disassembled quick and safely with an original Tsubaki Chain Tool without damaging the bushes (RS08B-LM-1 to RS16B-LM-1).

Patented Ring Coining ProcessBreakage of the chains connecting link is no issue at Tsubaki thanks to this unique feature. By applying the patented Ring Coining process, Tsubaki generates a cold deformation around the pin hole of the connecting link plate. This results in residual stress around the pin hole and thereby adds strength. By using this process transmission capacity is 100% of the base chain.

Special EnvironmentsTsubaki Lambda has outstanding performance in temperatures up to 150°C. For temperatures above 150°C Tsubaki has a special high-temperature Lambda available. Please contact Tsubaki for more detailed information.

For applications in the food industry, Tsubaki can supply Lambda chain with bushes impregnated with food grade lubricating oil (NSF-H1 and H3 certified).

When an application needs water wash downs or is exposed to moisture, and lubrication is not possible or desirable, Lambda N.E.P. is most efficient.

AdvantagesTsubaki has enhanced the Lambda with the following advantages:

Save Maintenance CostsNo expensive labour costs as it is not required to manually lubricate this chain.

Save Purchasing CostsLower frequency of purchasing due to the high quality of the chain and it’s long economic life. No purchasing of lubricants or lubrication systems necessary.

Higher ProductivityNo unforeseen downtime due to chain breakdown. Less time required for maintenance and therefore more time for production.

Environmental FriendlyApplications run clean thus reducing the risk of contaminating products, machines, floor etc.

Inter-Changeability

Chains: • BS Lambda: BS Lambda Chains are fully

interchangeable with standard BS roller chains.

• ANSI Lambda: Only simplex ANSI Lambda is interchangeable with standard ANSI roller chain. However, as the pins are longer than those of the standard ANSI roller chain, please make sure that there is no interference with the machine.

Sprockets: • BS Lambda: Standard BS roller chain

sprockets can be used. However, due to the extended lifetime of BS Lambda chain, Tsubaki recommends to install sprockets with hardened teeth in every Lambda application.

• ANSI Lambda: Only simplex ANSI roller chain sprockets are interchangeable. Multi strand sprockets need to be customised due to the thickness of the roller link plates. Due to the extended lifetime of ANSI Lambda chain, Tsubaki advises to install sprockets with hardened teeth in every Lambda application.

FREE 24/7 technical support – Tel: 0870 240 2100


18

Chai

n Dr

ives

L2

L1

d2 d1

p

H

T

t

p

b1

d2 d1

T

b1

L2

L1 t

pt

OLL

L1

L1

2POL

TSUBAKIChain No.

PitchRoller

DiameterInnerWidth

Pin Link Plate

TransversePitch

Min. Tensile Strengthacc. to

ISO 606Approx.MassDiameter Length Length Length Thickness Thickness Height

p d1 b1 d2 L1 L2 L T t H (max) pt kN kg/m

RF06B-LM-1 9.525 (3/8”) 6.35 5.72 3.28

6.10 7.70 15.101.30 1.00 8.20

- 8.9 0.39RF06B-LM-2 11.20 12.80 25.90 10.24 16.9 0.75RS08B-LM-1

12.70 (1/2”) 8.51 7.75 4.45 8.40 10.00 18.60

1.60 1.60 12.00- 17.8 0.70

RS08B-LM-2 15.30 16.90 34.50 13.92 31.1 1.35RS10B-LM-1

15.875 (5/8”) 10.16 9.65 5.08 9.55 11.25 20.80

1.50 1.50 14.70- 22.2 0.95

RS10B-LM-2 17.85 19.55 39.40 16.59 44.5 1.85RS12B-LM-1

19.05 (3/4”) 12.07 11.68 5.7211.10 13.00 24.40

1.80 1.80 16.10- 28.9 1.25

RS12B-LM-2 20.85 22.75 45.90 19.46 57.8 2.50RS16B-LM-1

25.40 (1”) 15.88 17.02 8.2817.75 19.95 39.30

4.00 3.20 21.00- 60.0 2.70

RS16B-LM-2 33.55 35.75 73.40 31.88 106.0 5.40RS20B-LM-1

31.75 (1 1/4”) 19.05 19.56 10.1919.90 23.10 46.60

4.40 3.40 26.40- 95.0 3.85

RS20B-LM-2 38.25 41.45 84.60 36.45 170.0 7.65RS24B-LM-1

38.10 (1 1/2”) 25.40 25.40 14.6326.65 31.85 61.70

6.00 5.60 33.40- 160.0 7.45

RS24B-LM-2 50.80 56.00 112.80 48.36 280.0 14.65

Dimensions in mm

Note:

1. Connecting links are clip type for sizes up to RS16B-LM, and cotter type for sizes RS20B-LM to RS24B-LM.

2. RF06B-LM chain has flat shaped link plates.

3. Intermediate plate of RF06B-LM-2 and RS08B-LM-2 is a solid plate.

4. Centre sink riveting is applied for RS08B-LM-1 to RS16B-LM-1. Double stake riveting is applied to all other sizes including multi-strand chain.

5. Warning: previous generations of Lambda chain can not be connected with the above chains due to different dimensions.

6. When a single pitch offset link is used, please calculate a 35% reduction of the fatigue strength.

7. Also available in N.E.P. specification.

BS LAMBDA ChainBS LAMBDA CHAIN

06B-1Lambda:TSUB06B-2Lambda:TSUB08B-1Lambda:TSUB08B-2Lambda:TSUB10B-1Lambda:TSUB10B-2Lambda:TSUB12B-1Lambda:TSUB12B-2Lambda:TSUB16B-1Lambda:TSUB16B-2Lambda:TSUB20B-1Lambda:TSUB20B-2Lambda:TSUB24B-1Lambda:TSUB24B-2Lambda:TSUB

212212

8

Chai

n Dr

ives

BS Chain For Corrosive Environments

Whether your operation requires a sanitary environment, is exposed to corrosive chemicals, is heated to extreme temperatures, runs through a freezer, is exposed to the outdoors or is affected by excessive moisture: our specially designed and tested chains will outlast your current chains and contribute to a cost effective application.

Corrosion Resistant Chain (Stainless Steel base)

BS PC Engineering Plastic Combination ChainThe pins and pin link plates of these chains are made of SUS304 (spring clips SUS301). Engineering plastic (white) is used for the inner link. This combination makes it a lube-free, low noise (5 dB lower than

BS standard roller chain) and lightweight chain (50% lighter than BS standard roller chain). Working temperature range: -20°C to +80°C.

BS SS Stainless Steel ChainAll basic components of this chain are made of Stainless Steel SUS304 (except the spring clips, which are made of SUS301). This chain can be used in special environments such as underwater, acidic and alkaline applications. It can also be used in high and low temperatures (-20°C to +400°C). SUS304 is only marginally magnetic, which is the result of the cold-forging process.

Corrosion Protected Chain (Carbon Steel base)

BS N.E.P. New Environmental Plating ChainBS N.E.P. Chain is a TSUBAKI BS chain that has undergone a special surface treatment. The link plates, bushes and bearing pins have a special three stage layer applied in order to provide the maximum protection

from the operating or environmental conditions. (Spring clips are SUS301). N.E.P. Rollers have a special coating designed to resist the corrosive conditions as well as the severe dynamic contact between roller and sprocket.

This chain is suitable for use in environments exposed to seawater, acid-rain and other adverse weather conditions. This chain does not contain any chemically hazardous substances such as Hexavalent Chromium, Lead, Cadmium and Mercury as regulated by RoHS√. The kilowatt ratings are the same as those of the corresponding BS chain with a working temperature range: -10°C to +150°C. Above +60°C a special high-temperature lubrication is required. Of course, BS LAMBDA N.E.P. chain is also available. √ RoHS= Restriction of Hazardous Substances

Dimensions in mm

TSUBAKIChain No.

PitchBush

DiameterInner Width

Pin Link PlateMax.

Allowable Load

acc. to Tsubaki

Approx. MassDiameter Length Length Thickness Thickness Height

p d1 b1 d2 L1 L2 T t H (max) kN kg/mRF06B-PC-1 9.525 (3/8”) 6.35 5.72 3.28 6.50 7.25 1.30 1.00 8.60 0.20 0.23RF08B-PC-1 12.70 (1/2”) 8.51 7.75 4.45 8.35 10.05 1.60 1.50 12.00 0.46 0.40RF10B-PC-1 15.875 (5/8”) 10.16 9.65 5.08 9.55 11.25 1.50 1.50 14.70 0.53 0.51RF12B-PC-1 19.05 (3/4”) 12.07 11.68 5.72 11.10 13.00 1.80 1.80 16.10 0.70 0.67

BS PC ChainBS PC Chain

L2L1

d2

p

HT

t

p

b1

d1

BS PC CHAIN

06B-1PC:TSUB08B-1PC:TSUB10B-1PC:TSUB12B-1PC:TSUB



18

Chai

n Dr

ives

BS SS ChainDimensions in mm

TSUBAKIChain No.

PitchRoller

DiameterInner Width

Pin Link Plate

Transverse Pitch

Max. Allowable

Loadacc. to Tsubaki

Approx. MassDiameter Length Length Length Thickness Thickness Height

p d1 b1 d2 L1 L2 L T t H (max) pt kN kg/mRF06B-SS-1

9.525 (3/8”) 6.35 5.72 3.286.50 7.25 15.45

1.30 1.00 8.20- 0.28 0.39

RF06B-SS-2 11.60 12.30 28.85 10.24 0.56 0.75RS08B-SS-1

12.70 (1/2”) 8.51 7.75 4.458.35 10.05 20.05

1.50 1.50 12.00- 0.50 0.70

RS08B-SS-2 15.30 17.00 34.60 13.92 1.00 1.35RS08B-SS-3 22.25 23.95 48.60 13.92 1.50 2.00RS10B-SS-1

15.875 (5/8”) 10.16 9.65 5.089.55 11.25 22.90

1.50 1.50 14.70- 0.67 0.95


19.05 (3/4”) 12.07 11.68 5.7211.10 13.00 26.70

1.80 1.80 16.10- 0.89 1.25


25.40 (1”) 15.88 17.02 8.2817.75 19.95 38.90

4.00 3.20 21.00- 2.10 2.70

RS16B-SS-2 33.55 35.75 73.80 31.88 4.20 5.40RS20B-SS-1 31.75 (1 1/4”) 19.05 19.56 10.19 20.10 23.10 48.40 4.50 3.50 26.00 - 2.95 3.85

Dimensions in mm

TSUBAKIChain No.

PitchRoller

DiameterInner Width

Pin Link Plate

Transverse Pitch

Min. Tensile

Strengthacc. to

ISO 606

Min. Tensile

Strengthacc. to Tsubaki

Av. Tensile Strengthacc. to Tsubaki

Approx. MassDiameter Length Length Length Thickness Thickness Height

p d1 b1 d2 L1 L2 L T t H (max) pt kN kN kN kg/mRF06B-NEP-1

9.525 (3/8”) 6.35 5.72 3.286.35 7.65 14.20

1.30 1.00 8.20- 8.9 9.0 9.9 0.39

RF06B-NEP-2 11.43 12.57 - 10.24 16.9 17.0 18.7 0.75RS08B-NEP-1

12.70 (1/2”) 8.51 7.75 4.458.40 10.00 18.40

1.60 1.60 11.80- 17.8 19.0 20.9 0.70

RS08B-NEP-2 15.30 16.90 33.60 13.92 31.1 32.0 35.2 1.35RS10B-NEP-1

15.875 (5/8”) 10.16 9.65 5.089.55 11.25 21.10

1.50 1.50 14.70- 22.2 23.0 25.3 0.95

RS10B-NEP-2 17.85 19.55 39.40 16.59 44.5 44.5 49.0 1.85RS12B-NEP-1

19.05 (3/4”) 12.07 11.68 5.7211.20 13.10 24.80

1.80 1.80 16.10- 28.9 31.0 34.1 1.25

RS12B-NEP-2 20.85 22.75 46.30 19.46 57.8 61.0 67.1 2.50RS16B-NEP-1

25.40 (1”) 15.88 17.02 8.2817.75 19.95 38.90

4.00 3.20 21.00- 60.0 70.0 77.0 2.70

RS16B-NEP-2 33.55 35.75 73.80 31.88 106.0 128.0 141.0 5.40RS20B-NEP-1

31.75 (1 1/4”) 19.05 19.56 10.1919.90 23.10 46.95

4.40 3.40 26.00- 95.0 98.1 108.0 3.85

RS20B-NEP-2 38.25 41.45 84.85 36.45 170.0 197.0 217.0 7.65RS24B-NEP-1 38.10 (1 1/2”) 25.40 25.40 14.63 26.65 31.85 62.00 6.00 5.60 33.44 - 160.0 167.0 184.0 7.45

L2

L1

d2 d1

p

H

T

t

p

b1

d2 d1

T

b1

L2

L1 t

pt

d2 d1

T

b1 L2

L1

t pt

pt

OL

L

L1

L1

2POL

BS N.E.P. CHAIN

BS SS CHAIN

06B-1SS:TSUB06B-2SS:TSUB08B-1SS:TSUB08B-2SS:TSUB08B-3SS:TSUB10B-1SS:TSUB10B-2SS:TSUB10B-3SS:TSUB12B-1SS:TSUB12B-2SS:TSUB12B-3SS:TSUB16B-1SS:TSUB16B-2SS:TSUB20B-1SS:TSUB

06B-1NEP:TSUB06B-2NEP:TSUB08B-1NEP:TSUB08B-2NEP:TSUB10B-1NEP:TSUB10B-2NEP:TSUB12B-1NEP:TSUB12B-2NEP:TSUB16B-1NEP:TSUB16B-2NEP:TSUB20B-1NEP:TSUB20B-2NEP:TSUB24B-1NEP:TSUB

214214

8

Chai

n Dr

ives

Offset Link Pin

Press Fit

Bush

Connecting Link Pin

Slip Fit

Cotter Pin

Roller

Roller

Spring Clip

Roller Link Plate

Pin Link

Roller Link

Offset Link

Connecting Link

Base Chain

Pin Link Plate

Press Fit

Press Fit

BushPress Fit

Slip Fit

Slip Fit

Introduction to TSUBAKI Attachment Chain

In the world of attachment chain TSUBAKI is the manufacturer you require to assure smooth

operation. Whether your application requires attachments or extended pins in Carbon Steel, N.E.P.,

Nickel Plating or Stainless Steel, TSUBAKI is your partner. TSUBAKI’s maintenance

free solution, LAMBDA, is also available with a wide range of attachments. When starting

with a completely new design, TSUBAKI can tailor make an attachment chain for you in

any specification.

Standard Product Range

The product range for our standard attachment chains is:• BS Single Pitch Standard chain + standard attachments

• ANSI Single Pitch Standard chain + standard attachments

• ANSI Single Pitch HP Hollow Pin chain

• ANSI Single Pitch CU Curved chain

• ANSI Double Pitch Standard chain + standard attachments

• ANSI Double Pitch HP Hollow Pin chain

Attachment Chain Structure



18

Chai

n Dr

ives

Match & Tag Service: High Accuracy, Narrow Tolerance Service

For TSUBAKI, quality is second nature- and

so for customers with specific application

requirements, we are able to supply chains

with a specific length tolerance, or even

pairs & multiple chains length matched

and tagged in the same way for easy

identification and installation. This is as

a result of the sophisticated chain length

measurement equipment (the “Matchy”) kept

in house within the European headquarters

with supply times for such chains kept

to a minimum-ideal for distributors, final

consumers and OEM customers alike.

1A 2A2B1B

TolerancesWhen chains have to run in parallel for conveying purposes in for instance packaging machines or when a minimum of difference in chain length is required in lifting applications (accumulator towers in the steel and carpet industry)

TSUBAKI excels in quality performance. We can guarantee a maximum chain length difference of 0.50 mm independent of the total chain length demanded by our customers!

Custom Made Attachments

Canning Bookbinder Packaging

Tsubaki Gripper Chain

New solution for the thermoforming process found with Tsubaki’s wide range of ‘Gripper’ chains.

Tsubaki has launched a new range of ‘gripper’ chains to be used for thermoforming in various sectors including food, electrical and medical packaging. Whereas conventional gripping attachments often open vertically, Tsubaki’s range opens to the side as well which provides a larger opening preventing jams and making loading easier. This innovative solution is available with many variations of transmission chain, including Tsubaki’s unique Lambda lube-free chain. Offering extended chain life and minimal maintenance Tsubaki’s gripper chain offers a fresh, new option for thermoforming.

216216

8

Chai

n Dr

ives

Corrosion Protected Series

N.E.P. Chain• Innovative Surface Treatment

• Superior Corrosion Resistance

• Environmentally Friendly

Engineering Plastic Chain • Lube Free Operation

• Cleaner & Quieter Operation

• Easy Maintenance

• Alternative to Stainless Steel Chain

Corrosion Resistant Series

Industry Specific

TSUBAKI’s product range and service

capabilities are amongst the best in the

business, from standard attachments

through to specific industry applications.

For example: Gripper chain - for form,

fill & vacuum seal wrapping industry.

Specialist attachments and specific

matched length tolerance chains are

available to meet your production

schedules.

Cam Clutches (Freewheel)• Full European Range

• For Indexing, Backstopping

& Over-running Applications

• From as low as 6 Nm up to

686.000 Nm Torque Capacity

• Available from Stock

Mechanical Components

GT4 Winner• Unique Lube Groove Bush

• Longer Wear Life - Lower CO2 Emission

• High Transmission Capacity

• Easy Disassembly

• Accuracy of Chain Length Tolerance

Drive Chain Series

LAMBDA Chain• Absolutely no Lubrication Required

• Longer Wear Life

• Clean Handling & Running

• Higher Production Output

& Reduced Maintenance

• ANSI LAMBDA KF Series now available

(usable at high temperatures up to

230°C and suitable for food product

applications)

Lube Free Series

Performance Through Innovation



18

Chai

n Dr

ives

TSUBAKI: Value Added Services

Installation

TSUBAKI engineers can support installation projects from initial quotation stage, through on-site support during installation and then to final sign off at commission. TSUBAKI products offer best value for money when correctly installed, hence our support during this critical stage.

Surveying

TSUBAKI can support chain users by providing a site survey of their entire plant. This ensures the ordering of complex chain is made simple by an easy-to-use survey database. TSUBAKI wants this to be an effective business tool so uses simple language to identify chain and attachment detail. The survey results can also help reduce your overall stock level and further reduce cost by identifying and consolidating common chain types.

Condition Based Monitoring Service

TSUBAKI offers regular and scheduled site visits to monitor its chain’s performance. Customers receive a detailed report recommending the necessary actions to ensure best possible performance and value.

Training Services

TSUBAKI offers technical training packages tailored to suit your needs. From a simple introduction to chain and installation basics; through to chain selection, advanced failure analysis and application specific advice; TSUBAKI can partner with apprentices, maintenance engineers, and designers to ensure its wealth of experience is available.

Chain Analysis

TSUBAKI can analyse any returned chain to make a comprehensive and easy-to-follow report. We can often recommend TSUBAKI products that will offer further application benefits.

Chain Selection

TSUBAKI has experience of many application types and unique machine designs. We can offer a full chain selection package, working directly with engineers and designers to ensure the product specified is the ‘perfect fit’ for your needs.

218218

8

Chai

n Dr

ives

Complementary Products

Tsubaki’s offers the most complete and versatile selection of one-way clutches in the global industry. Cam Clutches are precision devices which lock the inner- and outer races, through a wedging action of cams, to transmit torque in one direction of rotation and overrun in the opposite direction. These units are often referred to as freewheels, sprag clutches, overrunning clutches, backstops or one-way clutches, depending upon on the application for which they are used.

Design Features

Full Cam ComplementThe full compliment of cams provides the maximum number of load transmitting members per given diameter. The result is a higher torque capacity than other clutches.

Cam DesignPrecision formed cams, made of special alloy steel assure extra long wear- and fatigue life.

High Quality ComponentsOuter- and inner races are made of high-quality alloy steel with high surface hardness and core toughness. The races are precision ground, providing excellent concentricity and surface finish to obtain cam rotation.

Tsubaki Roller Chain Coupling

The Tsubaki Roller Chain Coupling is a flexible coupling of amazingly simple construction. It consists of the combination of one coupling chain and a pair of coupling sprockets. The coupling can be used over a wide range of applications. It is flexible and strong, and surpasses all others with its unique qualities.

Tsubaki Echt Flex Couplings

This non-backlash, lube-free coupling has high torsional stiffness, maximizing the benefit of servomotors.

Based on finite element analysis, the disk is optimally designed to ensure reliable torque transmission, while absorbing misalignment smoothly.

All models are RoHS compliant.

Tsubaki Overload Protection

Torque Gard TGM Series are safety devices for the protection of machine equipment from overload. The Torq Gard TGM Series has many advantages compared to other safety devices such as pin type, friction type, ball type, roller type etc.

Tsubaki Sprockets

Tsubaki sprockets are built from top-grade, heat-treated carbon steel to offer long wear life, resist abrasion and withstand heavy shock loads. For extra corrosion resistance and food grade applications, alloy and stainless steel sprockets are also available. You get longer service life and reliable performance, turn after turn, time after time.



18

Chai

n Dr

ives

See Our Taper Bush Range

Chain AccessoriesChain Link Extractors

Quick and easy way to break a chainCan be used on all brands of chainTwo sizes available for chains 3/8" to 5/8" and 3/4" to 1.1/4" BS/ANSI

Price Each

Order Code Product Code Size 1+ 5+

WX35187 CHAINEXTR-NO1 3/8 - 5/8"BSLCHAINEXTR-NO1 BSLCHAINEXTR-NO1

WX35188 CHAINEXTR-NO2 3/4 - 1.1/4"BSLCHAINEXTR-NO2 BSLCHAINEXTR-NO2

Chain Connecting Tool

Tools designed to make roller chain connection quick and easyCan be used on all brands of chainTwo sizes available for BS and ANSI chains from 0.375" pitch to 0.75" (CT35), and 1.00" pitch to 3.00" pitch (CT80)

Price Each

Order Code Product Code Chain Pitch 1+ 5+

WX38219 CT35 0.375"-0.75"CT35:REN CT35:REN

WX38220 CT80 1.00"-3.00"CT80:REN CT80:REN

T-Max Chain Tensioners

• Automatically take up the slack with spring loaded T-Max Chain Tensioners. • Improve drive efficiency and extend component life with proper chain tension • A variety of design and size options suitable for a wide range of power transmission/motor applications.

Product Code Type Chain Size Force (lbs)

CT1111-L:FEND Linear-Large Arc UHMW Head 06B-1 5-30

CT1111:FEND Linear-Large Arc UHMW Head 06B-1 15-40






CT3112-H:FEND Linear-Large Arc UHMW Head 20B-1 30-200

CT3102-H:FEND Linear-Large Arc UHMW Head 100-1 30-200

CT1113-L:FEND Linear-Large Arc UHMW Head 06B-2 5-30




CT1103-L:FEND Linear-Large Arc UHMW Head 35-2 5-30

Sprockets3/8" Simplex Sprockets - Pilot Bore

Suitable for 3/8" pitch roller chainMinimum bore allowing reworking for large bore and keyway

Part Code De Dp dm d1 A

3SR8:MECRO 28 24.89 15 8 20

3SR9:MECRO 31 27.85 18 8 20

3SR10:MECRO 34 30.82 20 8 20

3SR11:MECRO 37 33.8 22 8 25

3SR12:MECRO 40 36.8 25 8 25

3SR13:MECRO 43 39.79 28 10 25

3SR14:MECRO 46.3 42.8 31 10 25

3SR15:MECRO 49.3 45.81 34 10 25

3SR16:MECRO 52.3 48.82 37 10 28

3SR17:MECRO 55.3 51.83 40 10 28

3SR18:MECRO 58.3 54.85 43 10 28

3SR19:MECRO 61.3 57.87 45 10 28

3SR20:MECRO 64.3 60.89 46 10 28

3SR21:MECRO 68 63.91 48 12 28

3SR22:MECRO 71 66.93 50 12 28

3SR23:MECRO 73.5 69.95 52 12 28

3SR24:MECRO 77 72.97 54 12 28

3SR25:MECRO 80 76 57 12 28

3SR26:MECRO 83 79.02 60 12 28

3SR30:MECRO 94.7 91.12 60 12 28

3SR32:MECRO 101.3 97.17 65 14 30

3/8" Simplex Sprockets - Taper Bore

Suitable for 3/8" pitch roller chainTaper boreLast 4 digits indicates the taper bush that is required


31-17-1008:MECRO 55.3 51.83 45 1008 22

31-18-1008:MECRO 58.3 54.85 43 1008 22

31-19-1008:MECRO 61.3 57.87 45 1008 22

31-20-1008:MECRO 64.3 60.89 46 1008 22

31-21-1008:MECRO 68 63.91 46 1008 22

31-23-1210:MECRO 73.5 69.95 63 1210 25

31-24-1210:MECRO 77 72.97 62 1210 25

31-25-1210:MECRO 80 76.02 63 1210 25

31-27-1210:MECRO 86 82.02 63 1210 25

31-28-1210:MECRO 89 85.07 60 1210 25

31-30-1210:MECRO 94.7 91.12 63 1210 25

3/8" Duplex Sprockets - Pilot Bore



3DR12:MECRO 40 36.8 25 10 25

3DR13:MECRO 43 39.79 28 10 25

3DR14:MECRO 46.3 42.8 31 10 25

3DR15:MECRO 49.3 45.81 34 10 25

3DR16:MECRO 52.3 48.82 37 12 30

3DR17:MECRO 55.3 51.83 40 12 30

3DR18:MECRO 58.3 54.85 43 12 30

3DR19:MECRO 61.3 57.87 46 12 30

3DR20:MECRO 64.3 60.89 49 12 30

3DR21:MECRO 68 63.91 52 12 30

3DR22:MECRO 71 66.93 55 12 30

3DR23:MECRO 73.5 69.95 58 12 30

3DR25:MECRO 80 76 64 12 30

3DR30:MECRO 94.7 91.12 79 12 30

220220

8

Chai

n Dr

ives

3/8" Duplex Sprockets - Taper Bore



32-17-1008:MECRO 55.3 51.83 41 1008 22

32-19-1008:MECRO 61.3 57.87 46 1008 22

32-21-1008:MECRO 68 63.91 49 1008 22

32-23-1210:MECRO 73.5 69.95 59 1210 25

32-24-1210:MECRO 77 72.97 61 1210 25

32-25-1210:MECRO 80 76.02 64 1210 25

32-27-1210:MECRO 86 82.02 70 1210 25

32-30-1210:MECRO 94.7 91.12 75 1210 75

3/8" Triplex Sprockets - Pilot Bore



3TR11:MECRO 37 33.8 22 10 35

3TR15:MECRO 49.3 45.81 34 12 35

3TR17:MECRO 55.3 51.83 40 12 35

3TR19:MECRO 61.3 57.87 46 12 35

3TR21:MECRO 68 63.91 52 14 40

3TR23:MECRO 73.5 69.95 58 14 40

3TR25:MECRO 80 76 64 14 40

1/2" Simplex Sprockets - Pilot Bore

Suitable for 1/2" Ptich Roller ChainMinimum bore allowing reworking for large bore and keyway


4SR10:MECRO 45.2 41.1 26 10 25

4SR11:MECRO 48.7 45.07 29 10 25

4SR12:MECRO 53 49.07 33 10 28

4SR13:MECRO 57.4 53.06 37 10 28

4SR14:MECRO 61.8 57.07 41 10 28

4SR15:MECRO 65.5 61.09 45 10 28

4SR16:MECRO 69.5 65.1 50 12 28

4SR17:MECRO 73.6 69.11 52 12 28

4SR18:MECRO 77.8 73.14 56 12 28

4SR19:MECRO 81.7 77.16 60 12 28

4SR20:MECRO 85.8 81.19 64 12 28

4SR21:MECRO 89.7 85.22 68 12 28

4SR22:MECRO 93.8 89.24 70 12 28

4SR23:MECRO 98.2 93.27 70 14 28

4SR24:MECRO 101.8 97.29 70 14 28

4SR25:MECRO 105.8 101.33 70 14 28

4SR26:MECRO 110 105.36 70 16 30

4SR27:MECRO 114 109.4 70 16 30

4SR28:MECRO 118 113.42 70 16 30

4SR30:MECRO 126.1 121.5 80 16 30

4SR31:MECRO 130.2 125.54 90 16 30

4SR32:MECRO 134.3 129.56 90 16 30

4SR33:MECRO 138.4 133.6 90 16 30

4SR34:MECRO 142.6 137.64 90 16 30

4SR35:MECRO 146.7 141.68 90 16 30

4SR36:MECRO 151 145.72 90 16 35




41-15-1008:MECRO 65.5 61.9 45 1008 22

41-16-1108:MECRO 69.5 65.1 50 1108 22

41-17-1210:MECRO 73.6 69.11 60 1210 25

41-18-1210:MECRO 77.8 73.14 60 1210 25

41-19-1210:MECRO 81.7 77.16 63 1210 25

41-20-1610:MECRO 85.8 81.19 71 1610 25

41-21-1610:MECRO 89.7 85.22 71 1610 25

41-22-1610:MECRO 93.8 89.24 70 1610 25

41-23-1610:MECRO 98.2 93.27 76 1610 25

41-24-1610:MECRO 101.8 97.29 70 1610 25

41-25-1610:MECRO 105.8 101.33 76 1610 25

41-26-1610:MECRO 110 105.36 70 1610 25

41-27-1610:MECRO 114 109.4 76 1610 25

41-28-2012:MECRO 118




4DR11:MECRO 48.7 45.07 32 12 35

4DR12:MECRO 53 49.07 35 12 35

4DR13:MECRO 57.4 53.06 38 12 35

4DR14:MECRO 61.8 57.07 42 12 35

4DR15:MECRO 65.5 61.07 46 12 35

4DR16:MECRO 69.5 65.1 50 14 35

4DR17:MECRO 73.6 69.11 54 14 35

4DR18:MECRO 77.8 73.14 58 14 35

4DR19:MECRO 81.7 77.16 62 14 35

4DR20:MECRO 85.8 81.19 66 14 35

4DR21:MECRO 89.7 85.22 70 16 40

4DR22:MECRO 93.8 89.24 70 16 40

4DR23:MECRO 98.2 93.27 70 16 40

4DR24:MECRO 101.8 97.29 75 16 40

4DR25:MECRO 105.8 101.33 80 16 40

4DR27:MECRO 114 109.4 85 16 40

4DR30:MECRO 126.1 121.5 100 16 40



18

Chai

n Dr

ives




42-15-1008:MECRO 65.5 61.9 46 1008 22

42-16-1108:MECRO 69.5 65.1 50 1108 22

42-17-1210:MECRO 73.6 69.11 56 1210 25

42-18-1210:MECRO 77.8 73.14 58 1210 25

42-19-1210:MECRO 81.7 77.16 62 1210 25

42-20-1610:MECRO 85.8 81.19 66 1610 25

42-21-1610:MECRO 89.7 85.22 70 1610 25

42-22-1610:MECRO 93.8 89.24 76 1610 25

42-23-1610:MECRO 98.2 93.27 79 1610 25

42-24-2012:MECRO 101.8 97.29 84 2012 32

42-25-2012:MECRO 105.8 101.33 87 2012 32

42-26-2012:MECRO 110 105.36 85 2012 32

42-27-2012:MECRO 114 109.4 87 2012 32

42-30-2012:MECRO 126.1 121.5 87 2012 32




4TR14:MECRO 61.8 57.07 42 14 50

4TR15:MECRO 65.5 61.09 46 14 50

4TR16:MECRO 69.5 65.1 50 16 50

4TR17:MECRO 73.6 69.11 54 16 50

4TR19:MECRO 81.7 77.16 62 16 50

4TR20:MECRO 85.8 81.19 66 16 50

4TR21:MECRO 89.7 85.22 70 16 55

4TR23:MECRO 98.2 93.27 70 16 50

4TR25:MECRO 105.8 101.33 80 16 55

4TR30:MECRO 126.1 121.5 100 20 55

1/2" Triplex Sprockets - Taper Bore



43-19-1210:MECRO 81.7 77.16 1210 34.9

43-21-1610:MECRO 89.7 85.22 1610 34.9

43-25-2012:MECRO 105.8 101.33 2012 34.9

43-30-2012:MECRO 126.1 121.5 2012 34.9




5SR8:MECRO 47 41.8 25 10 25

5SR9:MECRO 52.6 46.42 30 10 25

5SR10:MECRO 57.5 51.37 35 10 25

5SR11:MECRO 63 56.34 37 12 30

5SR12:MECRO 68 61.34 42 12 30

5SR13:MECRO 73 66.32 47 12 30

5SR14:MECRO 78 71.34 52 12 30

5SR15:MECRO 83 76.36 57 12 30

5SR16:MECRO 88 81.37 60 12 30

5SR17:MECRO 93 86.39 60 12 30

5SR18:MECRO 98.3 91.42 70 14 30

5SR19:MECRO 103.3 96.45 70 14 30

5SR20:MECRO 108.4 101.49 75 14 30

5SR21:MECRO 113.4 106.52 75 16 30

5SR22:MECRO 118 111.55 80 16 30

5SR23:MECRO 123.5 116.58 80 16 30

5SR24:MECRO 128.3 121.62 80 16 30

5SR25:MECRO 134 126.66 80 16 30

5SR27:MECRO 144 134.75 85 20 35

5SR30:MECRO 158.8 151.87 90 20 35




51-13-1008:MECRO 73 66.32 47 1008 22

51-14-1108:MECRO 78 71.34 52 1108 22

51-15-1210:MECRO 83 76.36 60 1210 25

51-16-1610:MECRO 88 81.37 70 1610 25

51-17-1610:MECRO 93 86.36 71 1610 25

51-18-1610:MECRO 98.3 91.42 75 1610 25

51-19-1610:MECRO 103.3 96.45 75 1610 25

51-20-1610:MECRO 108.4 101.49 75 1610 25

51-21-1610:MECRO 113.4 106.52 76 1610 25

51-22-1610:MECRO 118 111.55 76 1610 25

51-23-1610:MECRO 123.4 116.58 76 1610 25

51-24-2012:MECRO 128.3 121.62 90 2012 32

51-25-2012:MECRO 134 126.66 90 2012 32

51-26-2012:MECRO 139 131.7 85 2012 32

51-27-2012:MECRO 144 136.75 90 2012 32

51-28-2012:MECRO 148.7 141.78 90 2012 32

51-30-2012:MECRO 158.8 151.87 90 2012 32

222222

8

Chai

n Dr

ives




5DR12:MECRO 68 61.34 44 14 40

5DR13:MECRO 73 66.32 49 14 40

5DR14:MECRO 78 71.34 54 14 40

5DR15:MECRO 83 76.36 59 14 40

5DR16:MECRO 88 81.37 64 16 45

5DR17:MECRO 93 86.39 69 16 45

5DR18:MECRO 98.3 91.42 74 16 45

5DR19:MECRO 103.3 96.45 79 16 45

5DR20:MECRO 108.4 101.49 84 16 45

5DR21:MECRO 113.4 106.52 85 16 45

5DR23:MECRO 123.5 116.58 95 16 45

5DR25:MECRO 134 126.66 105 16 45

5DR30:MECRO 158.8 151.87 120 20 45




52-15-1210:MECRO 83 76.36 1210 25.5

52-17-1610:MECRO 93 86.36 1610 25.5

52-18-1610:MECRO 98.3 91.42 1610

52-19-1610:MECRO 103.3 96.45 1610 25.3

52-20-1610:MECRO 108.4 101.49 1610 25.5

52-21-1610:MECRO 113.4 106.52 1610 25.5

52-23-1610:MECRO 123.4 116.58 1610 25.5

52-25-2012:MECRO 134 126.66 90 2012 32

52-27-2012:MECRO 144 136.75 90 2012 32

52-28-2012:MECRO 148.7 141.78 90 2012 32

52-30-2012:MECRO 158.8 151.87 90 2012 32




6SR10:MECRO 69 61.64 42 12 30

6SR11:MECRO 75 67.61 46 14 35

6SR12:MECRO 81.5 73.61 52 14 35

6SR13:MECRO 87.5 79.59 58 14 35

6SR14:MECRO 93.6 85.61 64 14 35

6SR15:MECRO 99.8 91.63 70 14 35

6SR16:MECRO 105.5 97.65 75 16 35

6SR17:MECRO 111.5 103.67 80 16 35

6SR18:MECRO 118 109.71 80 16 35

6SR19:MECRO 124.2 115.75 80 16 35

6SR20:MECRO 129.7 121.78 80 16 35

6SR21:MECRO 136 127.82 90 20 40

6SR22:MECRO 141.8 133.86 90 20 40

6SR23:MECRO 149 139.9 90 20 40

6SR24:MECRO 153.9 145.94 90 20 40

6SR25:MECRO 160 152 90 20 40

6SR26:MECRO 165.9 158.04 95 20 40

6SR27:MECRO 172.3 164.09 95 20 40

6SR30:MECRO 190.5 182.25 95 20 40




61-13-1210:MECRO 87.5 79.59 60 1210 25

61-14-1610:MECRO 93.6 85.61 71 1610 25

61-15-1610:MECRO 99.8 91.63 70 1610 25

61-16-1610:MECRO 105.5 97.65 75 1610 25

61-17-1610:MECRO 111.5 103.67 76 1610 25

61-18-2012:MECRO 118 109.71 90 2012 32

61-19-2012:MECRO 124.2 115.75 90 2012 32

61-20-2012:MECRO 129.7 121.78 90 2012 32

61-21-2517:MECRO 136 127.82 102 2517 45

61-22-2517:MECRO 141.8 133.86 102 2517 45

61-23-2517:MECRO 149 139.9 108 2517 45

61-24-2517:MECRO 153.9 145.94 108 2517 45

61-25-2517:MECRO 160 152 108 2517 45

61-27-2517:MECRO 172.3 164 108 2517 45

61-30-2517:MECRO 190.5 182.25 108 2517 45




6DR11:MECRO 75 67.61 47 16 50

6DR13:MECRO 87.5 79.59 59 16 50

6DR14:MECRO 93.6 85.61 65 16 50

6DR15:MECRO 99.8 91.63 71 16 50

6DR16:MECRO 105.5 97.65 77 20 50

6DR17:MECRO 111.5 103.67 83 20 50

6DR19:MECRO 124.2 115.75 95 20 50

6DR20:MECRO 129.7 121.78 100 20 50

6DR21:MECRO 136 127.82 100 20 50

6DR23:MECRO 149 139.9 110 20 50

6DR24:MECRO 153.9 145.94 110 20 50

6DR25:MECRO 160 152 120 20 50

6DR26:MECRO 165.9 158.04 120 20 50

6DR30:MECRO 190.5 182.25 120 20 50



18

Chai

n Dr

ives




62-15-1610:MECRO 99.8 91.63 1610 30.3

62-16-1610:MECRO 105.5 97.65 1610 30.3

62-17-1610:MECRO 111.5 103.67 1610 30.3

62-19-2012:MECRO 124.2 115.75 90 2012 32

62-20-2517:MECRO 129.7 121.78 108 2517 45

62-21-2517:MECRO 136 127.82 108 2517 45

62-23-2517:MECRO 149 139.9 108 2517 45

62-24-2517:MECRO 153.9 145.94 108 2517 45

62-25-2517:MECRO 160 152 108 2517 45

62-27-2517:MECRO 172.3 164 108 2217 45

62-30-2517:MECRO 190.5 182.25 108 2517 45




6TR12:MECRO 81.5 73.61 53 20 70

6TR15:MECRO 99.8 91.63 71 20 70

6TR16:MECRO 105.5 97.65 77 20 70

6TR17:MECRO 111.5 103.67 83 20 70

6TR19:MECRO 124.2 115.75 95 20 70

6TR20:MECRO 129.7 121.78 100 20 70

6TR21:MECRO 136 127.82 100 20 70

6TR23:MECRO 149 139.9 110 20 70

6TR25:MECRO 160 152 120 20 70

3/4" Triplex Sprockets - Taper Bore



63-15-1615:MECRO 99.8 91.63 1615 49.8

63-17-2012:MECRO 111.5 103.67 1615 49.8

63-19-2012:MECRO 124.2 115.75 2012 49.8

63-21-2517:MECRO 136 127.82 2517 49.8

63-23-2517:MECRO 149 139.9 2517 49.8

63-25-2517:MECRO 160 152 2517 49.8

1" Simplex Sprockets - Pilot Bore

Suitable for 1" pitch roller chainMinimum bore allowing reworking for large bore and keyway


8SR9:MECRO 85 74.27 50 16 35

8SR10:MECRO 93 82.19 55 16 35

8SR11:MECRO 101.5 90.14 61 16 40

8SR12:MECRO 109 98.14 69 16 40

8SR13:MECRO 117 106.12 78 16 40

8SR14:MECRO 125 114.15 84 16 40

8SR15:MECRO 133 122.17 92 16 40

8SR16:MECRO 141 130.2 100 20 45

8SR17:MECRO 149 138.22 100 20 45


8SR18:MECRO 157 146.28 100 20 45

8SR19:MECRO 165.2 154.33 100 20 45

8SR20:MECRO 173.2 162.38 100 20 45

8SR21:MECRO 181.2 170.43 110 20 50

8SR22:MECRO 189.3 178.48 110 20 50

8SR23:MECRO 197.5 186.53 110 20 50

8SR24:MECRO 205.5 194.59 110 20 50

8SR25:MECRO 213.5 202.66 110 20 50

8SR26:MECRO 221.6 21.72 120 20 50

8SR30:MECRO 254 243 120 20 50

1" Simplex Sprockets - Taper Bore

Suitable for 1" pitch roller chainTaper boreLast 4 digits indicates the taper bush that is required


81-13-1610:MECRO 117 106.12 73 1615 38

81-15-1610:MECRO 133 122.17 76 1615 38

81-16-2012:MECRO 141 130.2 90 2012 32

81-17-2012:MECRO 149 138.22 90 2012 32

81-18-2517:MECRO 157 146.28 108 2517 45

81-19-2517:MECRO 165.2 154.33 108 2517 45

81-20-2517:MECRO 173.2 162.38 108 2517 45

81-21-2517:MECRO 181.2 170.43 110 2517 45

81-23-2517:MECRO 197.5 186.53 110 2517 45

81-24-2517:MECRO 205.5 194.59 108 2517 45

81-25-2517:MECRO 213.5 202.66 110 2517 45

81-27-2517:MECRO 229.6 218.79 110 2517 45

81-28-2517:MECRO 237.7 226.85 108 2517 45

81-30-3020:MECRO 254 243 140 3020 51

Can’t see it here, just call 0870 240 2100

224224

8

Chai

n Dr

ives

1" Duplex Sprockets - Pilot Bore



8DR12:MECRO 109 98.14 72 20 70

8DR13:MECRO 117 106.12 80 20 70

8DR15:MECRO 133 122.17 96 20 70

8DR17:MECRO 149 138.22 112 20 70

8DR19:MECRO 165.2 154.33 128 20 70

8DR20:MECRO 173.2 162.38 130 20 70

8DR21:MECRO 181.2 170.43 130 25 70

8DR23:MECRO 197.5 186.53 130 25 70

8DR25:MECRO 213.5 202.66 130 25 70

8DR26:MECRO 221.6 210.72 130 25 70

8DR32:MECRO 270 259.13 140 25 70

1" Duplex Sprockets - Taper Bore



82-15-2012:MECRO 133 122.17 2012 47.7

82-17-2517:MECRO 149 138.22 2517 47.7

82-19-2517:MECRO 165.2 154.33 2517 47.7

82-21-3020:MECRO 181.2 170.43 140 3020 51


82-23-3020:MECRO 197.5 186.53 140 3020 51

82-25-3020:MECRO 213.5 202.66 140 3020 51

82-27-3020:MECRO 229.6 218.79 140 3020 51

82-30-3020:MECRO 254 243 140 3020 51

1" Triplex Sprockets - Pilot Bore



8TR12:MECRO 109 98.14 72 25 100

8TR15:MECRO 133 122.17 96 25 100

8TR19:MECRO 165.2 154.33 128 25 100

8TR21:MECRO 181.2 170.43 130 25 100

1" Triplex Sprockets - Taper Bore



83-17-2517:MECRO 149 138.22 2517 79.6

83-19-3020:MECRO 165.2 154.33 3030 79.6

83-21-3020:MECRO 181.2 170.43 3030 79.6

83-23-3525:MECRO 197.5 186.53 159 3535 89

83-25-3525:MECRO 213.5 202.66 175 3535 89

1 1/4" Simplex Sprockets - Pilot Bore

Suitable for 1 1/4" pitch roller chainMinimum bore allowing reworking for large bore and keyway


10SR10:MECRO 117.9 102.74 70 20 40

10SR11:MECRO 127.8 112.68 77 20 45

10SR13:MECRO 147.8 132.65 98 20 45

10SR14:MECRO 157.8 142.68 108 20 45

10SR15:MECRO 167.9 152.720118 118 20 45

10SR16:MECRO 177.9 162.75 120 20 50

10SR17:MECRO 187.9 172.78 120 25 50

10SR18:MECRO 198 182.85 120 25 50

10SR19:MECRO 208.1 192.92 120 25 50

10SR20:MECRO 218.1 202.98 120 25 50

10SR23:MECRO 248.3 233.17 140 25 55

10SR25:MECRO 268.5 253.33 140 25 55

1 1/4" Duplex Sprockets - Pilot Bore



10DR17:MECRO 187.9 "172 78" 120 25 80

10DR19:MECRO 208.1 192.91 120 25 80

10DR23:MECRO 248.3 233.17 140 25 80



18

Chai

n Dr

ives

1 1/4" Triplex Sprockets - Pilot Bore



10TR17:MECRO 187.9 172.78 120 25 115

10TR19:MECRO 208.1 192.91 120 25 115

10TR21:MECRO 228.2 213.04 140 25 115

1 1/2" Simplex Sprockets - Pilot Bore



12SR9:MECRO 126.4 111.4 70 20 45

12SR10:MECRO 138 123.29 80 20 45

12SR13:MECRO 174.2 159.18 114 25 50

12SR15:MECRO 198.2 183.26 132 25 50

12SR17:MECRO 222.3 207.34 136 25 55

12SR19:MECRO 246.5 231.49 136 25 55

12SR21:MECRO 270.6 255.65 150 25 60

12SR25:MECRO 319 304 150 25 60

12SR30:MECRO 379.5 364.5 150 30 60

1 1/2" Duplex Sprockets - Pilot Bore



12DR15:MECRO 198.2 183.26 132 25 100

12DR19:MECRO 246.5 231.49 160 25 100

12DR25:MECRO 319 304 160 25 100

Taper Bore BushesTaper Bore Bushes - Metric

Part Code Keyway Width (mm) Keyway Depth (mm)

1008-12:MECRO 4 1.8

1008-14:MECRO 5 2.3

1008-16:MECRO 5 2.3

1008-19:MECRO 6 2.8

1008-20:MECRO 6 2.8

1008-24:MECRO 8 2

1008-25:MECRO 8 1.3

1108-10:MECRO 3 1.4

1108-11:MECRO 4 1.8

1108-12:MECRO 4 1.8

1108-14:MECRO 5 2.3

1108-16:MECRO 5 2.3

1108-18:MECRO 6 2.8

1108-19:MECRO 6 2.8

1108-20:MECRO 6 2.8

1108-24:MECRO 8 3.3

1108-25:MECRO 8 3.3

1108-28:MECRO 8 2

1210-12:MECRO 4 1.8

1210-14:MECRO 5 2.3

1210-15:MECRO 5 2.3


1210-16:MECRO 5 2.3

1210-19:MECRO 6 2.8

1210-20:MECRO 6 2.8

1210-22:MECRO 6 2.8

1210-24:MECRO 8 3.3

1210-25:MECRO 8 3.3

1210-28:MECRO 8 3.3

1210-30:MECRO 8 3.3

1210-32:MECRO 10 3.3

1610-16:MECRO 5 2.3

1610-19:MECRO 6 2.8

1610-20:MECRO 6 2.8

1610-22:MECRO 6 2.8

1610-24:MECRO 8 3.3

1610-25:MECRO 8 3.3

1610-28:MECRO 8 3.3

1610-30:MECRO 8 3.3

1610-32:MECRO 10 3.3

1610-35:MECRO 10 3.3

1610-38:MECRO 10 3.3

1610-40:MECRO 12 3.3

1610-42:MECRO 12 2.2

2012-19:MECRO 6 2.8

2012-20:MECRO 6 2.8

2012-22:MECRO 6 2.8

2012-24:MECRO 8 3.3

2012-25:MECRO 8 3.3

2012-28:MECRO 8 3.3

2012-30:MECRO 8 3.3

2012-32:MECRO 10 3.3

2012-35:MECRO 10 3.3

2012-38:MECRO 10 3.3

2012-40:MECRO 12 3.3

2012-42:MECRO 12 3.3

2012-45:MECRO 14 3.8

2012-48:MECRO 14 3.8

2012-50:MECRO 14 3.8

2517-25:MECRO 8 3.3

2517-28:MECRO 8 3.3

2517-30:MECRO 8 3.3

2517-32:MECRO 10 3.3

2517-35:MECRO 10 3.3

2517-38:MECRO 10 3.3

2517-40:MECRO 12 3.3

2517-42:MECRO 12 3.3

2517-45:MECRO 14 3.8

2517-48:MECRO 14 3.8

2517-50:MECRO 14 3.8

2517-55:MECRO 16 4.3

2517-60:MECRO 18 4.4

3020-30:MECRO 8 3.3

3020-35:MECRO 10 3.3

3020-38:MECRO 10 3.3

3020-40:MECRO 12 3.3

3020-42:MECRO 12 3.3

3020-45:MECRO 14 3.8

3020-48:MECRO 14 3.8

3020-50:MECRO 14 3.8

3020-55:MECRO 16 4.3

3020-60:MECRO 18 4.4

3020-65:MECRO 18 4.4

3020-70:MECRO 20 4.9

3020-75:MECRO 20 4.9

3535-48:MECRO 14 3.8

3535-50:MECRO 14 3.8

3535-55:MECRO 16 4.3

3535-60:MECRO 18 4.4

3535-65:MECRO 18 4.4

226226

8

Chai

n Dr

ives


3535-70:MECRO 20 4.9

3535-75:MECRO 20 4.9

3535-80:MECRO 22 5.4

3535-85:MECRO 22 5.4

3535-90:MECRO 25 5.4

4040-70:MECRO 20 4.9

4040-80:MECRO 22 5.4

4040-90:MECRO 25 5.4

4040-100:MECRO 28 6.4

4545-80:MECRO 22 5.4

4545-85:MECRO 22 5.4

4545-100:MECRO 28 6.4

5050-100:MECRO 28 6.4

5050-110:MECRO 28 6.4

5050-125:MECRO 32 7.4

Taper Bore Bushes - Imperial

Part Code Keyway Width (inch) Keyway Depth (inch)

1008-5/8:MECRO 0.187 0.093

1008-3/4:MECRO 0.187 0.093

1008-1:MECRO 0.25 0.125

1108-5/8:MECRO 0.187 0.093

1108-3/4:MECRO 0.187 0.093

1108-1:MECRO 0.25 0.125

1210-1/2:MECRO 0.125 0.062

1210-5/8:MECRO 0.187 0.093

1210-3/4:MECRO 0.187 0.093

1210-7/8:MECRO 0.25 0.125

1210-1:MECRO 0.25 0.125

1210-1-1/8:MECRO 0.312 0.125

1210-1-1/4:MECRO 0.312 0.125

1610-5/8:MECRO 0.187 0.093

1610-3/4:MECRO 0.187 0.093

1610-7/8:MECRO 0.25 0.125

1610-1:MECRO 0.25 0.125

1610-1-1/8:MECRO 0.312 0.125

1610-1-1/4:MECRO 0.312 0.125

1610-1-3/8:MECRO 0.375 0.125

1610-1-1/2:MECRO 0.375 0.125

2012-3/4:MECRO 0.187 0.093

2012-1:MECRO 0.25 0.125

2012-1-1/8:MECRO 0.312 0.125

2012-1-1/4:MECRO 0.312 0.125

2012-1-3/8:MECRO 0.375 0.125

2012-1-1/2:MECRO 0.375 0.125

2012-1-5/8:MECRO 0.437 0.156

2012-1-3/4:MECRO 0.437 0.156

2012-2:MECRO 0.5 0.125

2517-1:MECRO 0.25 0.125

2517-1-1/4:MECRO 0.312 0.125

2517-1-1/2:MECRO 0.375 0.125

Part Code Keyway Width (inch) Keyway Depth (inch)

2517-1-5/8:MECRO 0.437 0.156

2517-1-3/4:MECRO 0.437 0.156

2517-2:MECRO 0.5 0.156

2517-2-1/4:MECRO 0.625 0.218

2517-2-1/2:MECRO 0.625 0.187

3020-1-1/4:MECRO 0.312 0.125

3020-1-1/2:MECRO 0.375 0.125

3020-1-3/4:MECRO 0.437 0.156

3020-1-7/8:MECRO 0.5 0.156

3020-2:MECRO 0.5 0.156

3020-2-1/8:MECRO 0.625 0.218

3020-2-1/4:MECRO 0.625 0.218

3020-2-1/2:MECRO 0.625 0.218

3020-2-3/4:MECRO 0.75 0.25

3020-3:MECRO 0.75 0.218

3535-1-3/4:MECRO 0.437 0.156

3535-2:MECRO 0.5 0.156

3535-2-1/4:MECRO 0.625 0.218

3535-2-1/2:MECRO 0.625 0.218

3535-3:MECRO 0.75 0.25

4040-4:MECRO 1 0.25

Trantorque Keyless Bush

Zero backlash - due to the shrink fit, longer life and reliabilityNo keyway required - no weak spot in the shaftSingle nut tightening - quick and easy installationInfinite postioning allowed - precise axial or radial postioningHighly concentric - self centering occures eliminating hub cocking during installation

Trantorque Mini

Product Code Shaft mm OD mm Component Length mm

Overall length mm

TTQM0516 5 16 19 10

TTQM0616 6 16 19 10

TTQM0720 7 20 22 11

TTQM0820 8 20 22 11

TTQM0920 9 20 22 11

TTQM1023 10 23 26 13

TTQM1123 11 23 26 13

TTQM1223 12 23 26 13

TTQM1426 14 26 29 16

TTQM1526 15 26 29 16

TTQM1626 16 26 29 16

Trantorque Standard

Product Code Shaft mm OD mm Component Length mm

Overall length mm

TTQM1732 17 32 30 22

TTQM1832 18 32 30 22

TTQM1932 19 32 30 22

TTQM2035 20 35 33 24

TTQM2235 22 35 33 24

TTQM2438 24 38 35 25

TTQM2538 25 38 35 25

TTQM2845 28 45 41 29

TTQM3045 30 45 41 29

TTQM3250 32 50 44 30

TTQM3550 35 50 44 30

ETP Express Locking Bushes

Locking bushes. Shafts 15-55mm ETP-EXPRESS locking bushes ETP locking bushes connect hubs, sprockets, pulleys and gears to shafts without keyways and collarsSingle radial fixing screw for ultra-fast fixingAutomatic release without stickingInfinite axial & radial adjustmentShaft/hub machine tolerances h7/H7High concentricity 0.03mmTemperature range -30 to +85°CShafts up to 100mm available on requestMin hub external diameter should be 1.5 x C if steel, 2.5 x C if aluminium Stainless steel & corrosion protected models on request

Product Code Bore mmRated torque Nm

Max radial force kN

A C E

ETP15-EXPRESS 15 46 0.5 46 18 39

ETP19-EXPRESS 19 85 1.0 50.5 23 42

ETP20-EXPRESS 20 110 1.0 51.5 24 44

ETP24-EXPRESS 24 190 1.4 57.5 29 47

ETP25-EXPRESS 25 230 1.5 58 30 49

ETP28-EXPRESS 28 280 1.8 63 34 52

ETP30-EXPRESS 30 380 2.0 64.5 36 54

ETP32-EXPRESS 32 440 2.2 68.5 39 56

ETP35-EXPRESS 35 640 2.5 73 42 59

ETP38-EXPRESS 38 890 2.8 84.5 46 72

ETP40-EXPRESS 40 1100 3.0 86.5 48 75

ETP50-EXPRESS 50 1900 4.5 98.5 60 80

ETP55-EXPRESS 55 2400 5.0 106 67 85


See page 170 for more details


18

Chai

n Dr

ives

ETP Classic Line Locking Bushes

ETP-CLASSIC locking bushes. Shafts 15-60mmETP-CLASSIC locking bushes are a well known solution for fixing hubs, sprockets, pulleys and gears to shafts without the use of keyways or collarsEasy fitting and removal with axial setting screwsLow tightening torquesNo backlash or frettingInfinite axial & radial adjustmentRadial concentricity 0.04mmTemperature range -30 to +85°CShafts up to 100mm available on requestMin hub external diameter should be 1.7 x C if steel, 2.7 x C if aluminium Stainless steel & corrosion protected models on request

Product Code

Bore mm Rated torque Nm

Max radial force kN

A C F

ETP15 15 55 7.3 38 23 35

ETP19 19 100 10.6 45 28 42

ETP20 20 125 12.5 45 28 42

ETP24 24 200 16.7 49 34 45

ETP25 25 250 20.0 49 34 48

ETP28 28 300 21.4 55 39 50

ETP30 30 420 28 57 41 52

ETP32 32 420 26.3 60 43 57

ETP35 35 650 37.1 63 47 60

ETP38 38 750 39.5 65 50 64

ETP40 40 940 47 70 53 68

ETP42 42 940 44.5 70 55 70

ETP50 50 1900 76 83 65 82

ETP60 60 3400 113 95 77 96

Engineering Plastic Materials

Extruded Wear Strips

Nylon Casting

to inndustry

MMaannuufacture, proocess and ssupppply

plastic, insulation and rubber products

Excellence in Plastic Engineering for Industry

www.par-group.co.uk

PAR Group has over 30 years of experience serving clients in the UK, Europe and Worldwide. We have our own rubber moulding, converting, CNC machining, plastic fabrication, plastic forming, welding and stitching facilities. Additionally we also supply an extensive range of engineering plastics,

insulation and rubber products. Having achieved ISO 9001 accreditation, PAR Group always strives for excellence in service and quality. With vast experience in rubber and plastics engineering, we are renowned for our ability to provide solutions to unusual and difficult applications.

We stock an extensive range of plastic sheet, rod and tube in various materials including machining, fabrication and specialist plastics. Our CNC saw facilities enable us to cut sheets up to 4000mm x 4000mm and up to a maximum thickness of 147mm. For rods, our automatic band saw provides a billeting service for up to 300mm diameter. Below are our most popular types of engineering plastics.

Wear strips are commonly used to prevent chain or belt movement and reduce vibration which can increase bearing and motor loads. We have the facilities to extrude Corrothene for a wide range of standard profiles along with in-house tool making facilities enabling us to extrude bespoke wear strips to your exact requirements.

manufacturing process is also suitable for producing the same plastic component required on a regular basis. At our IAC Plastics division we manufacture our own brand of Corromidesheets and tubes. We hold tooling for a range of standard sizes and also offer a custom Nylon casting service for specific customer requirements. We offer various Nylon grades and have ultra-sonic detection equipment enabling us to carry out inspections on all castings for any voids and porosity.

®

®

®

Contact Us

Plastic Machining

Plastic Fabrication

For further details contact your nearestBrammer Sales & Service Centre on 0870 240 2100

to iindustry

MMaannufacture, prrocess andd suppply

plastic, insulation and rubber products

Excellence in Plastic Engineering for Industry

www.par-group.co.uk

PAR Group manufacture machined plastic components using highly advanced CNC machining technology. We have an extensive range of manufacturing facilities including CNC machining, cutting, routing, lathing, drilling and milling. We also have a team of

technology, enabling us to precision engineer components to your exact requirements.

We have the facilities to fabricate, form, bend, weld, bond and polish a wide range of plastics. We commonly work with plastic

Acrylic/Perspex ,Polyethylene. We can flame polish the edges of certain plastic types for applications where aesthetics are an important factor.

Examples of our work:

Examples of our work:

Scraper Machined Wear Strips Scrolls / Wormfeeds

Machine Guard Plastic Chute Plastic Cover Plastic Cover

Machined Component

®

Documents

2013-14 Chain Drives