ABOUT THE VEHICLE

APPLICATIONSSPEAKER NOTESDash Type:Aftermarket Type:Upper Door:

Lower Door:Speaker Adapter:Speaker Harness:Speaker Assembly:

Upper Door:Lower Door:

Speaker Harness:Speaker Assembly:

Front Speakers:

Rear Speakers:FACTORY COLOR CODES

12v Battery (+):12v Accessory (+):12v Ground (-):12v Amp Turn On (+):Illumination:Left Front Speaker (+):Left Front Speaker (-):Right Front Speaker (+):Right Front Speaker (-):Left Rear Speaker (+):Left Rear Speaker (-):Right Rear Speaker (+):Right Rear Speaker (-):

Honda Accord 2013

Make:Model:Year:

STANDARD/OPTIONAL- AM/FM/CD/SAT/MP3/NAV RADIO- 7 Speaker System- 3.5mm Aux/USB iPod Input

L: 1.00”W: 1.00”D: 0.50”

Dimensions:

Tweeter

1”5 1/2”SAT6N/A(3) Rivets Securing

Dimensions:UpperL: 0.00”

W: 0.00”D: 0.00”

N/A5 1/2”

N/A(3) Rivets Securing

New Custom Dash Single/Double Din

TBATBATBATBATBATBATBATBATBATBATBATBATBA

Radio Harness:Antenna Adapter:Blue Fusion/Bluetooth:AUX / iPod Interface:

Aftermaket Kits:

Harness/Interface/Adapters:

TBA

HA11BHAA2BBT1000/BT1200FMMOD02

Other:Auxilary Input:USB Input:

Center Console Center Console

Scosche Pro App

Aftermarket Kit:

TBA

The Speaker

Decklid Subwoofer: TBASpeaker Adapter: SAT6

Speaker Assembly: The SpeakerTBA

LowerL: 5.50”

W: 5.50”D: 2.50”

- Steering Wheel Controls- Bluetooth

L: 5.50”W: 5.50”D: 2.50”

Lower

Honda Accord 2013

Honda Accord 2013

+12 Volt Constant: Lt. Green/ Purple+12 Volt Acessory: Pink/ Black Ground: Black/ Lt. Green

R ight Positive: Orange/ Redh ative: Brown/ ink

OEM COLOR CODES

VEHICLE DISASSEMBLY

REAR DECK SPEAKERS

RADIO REMOVAL

Make: HondaModel: AccordYear: 2013

FRONT DOOR TWEETERS

PRELIMINARY:Disconnect the negative battery cable.

FRONT DOOR SPEAKERS

Scosche Pro App

1. TBA

1. With PRT unclip upper door molding, extract (2) T-25 Torx Screws.2. With PRT unclip and remove door handle panel, extract (2) T-25 Torx Screws.3. Extract (1) T-25 Torx Screw at bottom of door panel, unclip and remove side marker.4. Unclip door panel, unplug harness, release door lock cable and remove door panel.5. Extract (4) 8mm. Screws unplug and remove speaker.

1. With PRT unclip upper door molding, extract (2) T-25 Torx Screws.2. With PRT unclip and remove door handle panel, extract (2) T-25 Torx Screws.3. Extract (1) T-25 Torx Screw at bottom of door panel, unclip and remove side marker.4. Unclip door panel, unplug harness, release door lock cable and remove door panel.5. Extract (3) 8mm. Screws unplug and remove speaker.

1. With a PRT remove the panel above the push to start button, unplug and remove.2. With a PRT remove top panel above radio revealing (2) Phillips Head Screws, extract (2) Phillips Head Screws.3. With PRT remove both left and Right silver strips on center console.4. Extract (2) Phillips Head Screws at upper dash pocket and remove.5. Extract (2) 8mm. Screws located under radio.6. Carefully slide radio out, unplug and remove.