2014 Buick Regal Owner Manual M...Buick Regal Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- Black plate (2,1) 6081497) - 2014 - CRC 2nd Edition - 11/27/13 2014 Buick Regal Owner

Black plate (1,1)Buick Regal Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-6081497) - 2014 - CRC 2nd Edition - 11/27/13

2014 Buick Regal Owner Manual M

In Brief . . . . . . . . . . . . . . . . . . . . . . . . 1-1Instrument Panel . . . . . . . . . . . . . . 1-2Initial Drive Information . . . . . . . . 1-4Vehicle Features . . . . . . . . . . . . . 1-15eAssist Features . . . . . . . . . . . . . 1-19Performance andMaintenance . . . . . . . . . . . . . . . . 1-21

Keys, Doors, andWindows . . . . . . . . . . . . . . . . . . . . 2-1Keys and Locks . . . . . . . . . . . . . . . 2-1Doors . . . . . . . . . . . . . . . . . . . . . . . . 2-14Vehicle Security. . . . . . . . . . . . . . 2-16Exterior Mirrors . . . . . . . . . . . . . . . 2-19Interior Mirrors . . . . . . . . . . . . . . . . 2-20Windows . . . . . . . . . . . . . . . . . . . . . 2-20Roof . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23

Seats and Restraints . . . . . . . . . 3-1Head Restraints . . . . . . . . . . . . . . . 3-2Front Seats . . . . . . . . . . . . . . . . . . . . 3-3Rear Seats . . . . . . . . . . . . . . . . . . . . 3-9Safety Belts . . . . . . . . . . . . . . . . . . 3-10Airbag System . . . . . . . . . . . . . . . . 3-19Child Restraints . . . . . . . . . . . . . . 3-31

Storage . . . . . . . . . . . . . . . . . . . . . . . 4-1Storage Compartments . . . . . . . . 4-1Additional Storage Features . . . 4-3

Instruments and Controls . . . . 5-1Controls . . . . . . . . . . . . . . . . . . . . . . . 5-2Warning Lights, Gauges, andIndicators . . . . . . . . . . . . . . . . . . . . 5-7

Information Displays . . . . . . . . . . 5-31Vehicle Messages . . . . . . . . . . . . 5-39Vehicle Personalization . . . . . . . 5-48Universal Remote System . . . . 5-54

Lighting . . . . . . . . . . . . . . . . . . . . . . . 6-1Exterior Lighting . . . . . . . . . . . . . . . 6-1Interior Lighting . . . . . . . . . . . . . . . . 6-4Lighting Features . . . . . . . . . . . . . . 6-6

Infotainment System . . . . . . . . . 7-1Introduction . . . . . . . . . . . . . . . . . . . . 7-1

Climate Controls . . . . . . . . . . . . . 8-1Climate Control Systems . . . . . . 8-1Air Vents . . . . . . . . . . . . . . . . . . . . . . . 8-6Maintenance . . . . . . . . . . . . . . . . . . . 8-6

Driving and Operating . . . . . . . . 9-1Driving Information . . . . . . . . . . . . . 9-2Starting and Operating . . . . . . . 9-15Engine Exhaust . . . . . . . . . . . . . . 9-26Automatic Transmission . . . . . . 9-27Manual Transmission . . . . . . . . . 9-30Drive Systems . . . . . . . . . . . . . . . . 9-32Brakes . . . . . . . . . . . . . . . . . . . . . . . 9-32Ride Control Systems . . . . . . . . 9-36Cruise Control . . . . . . . . . . . . . . . . 9-39Driver Assistance Systems . . . 9-49Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 9-60Towing . . . . . . . . . . . . . . . . . . . . . . . 9-65Conversions and Add-Ons . . . 9-65


2014 Buick Regal Owner Manual M

Vehicle Care . . . . . . . . . . . . . . . . . 10-1General Information . . . . . . . . . . 10-2Vehicle Checks . . . . . . . . . . . . . . . 10-3Headlamp Aiming . . . . . . . . . . . 10-30Bulb Replacement . . . . . . . . . . 10-31Electrical System . . . . . . . . . . . . 10-34Wheels and Tires . . . . . . . . . . . 10-41Jump Starting . . . . . . . . . . . . . . . 10-77Towing . . . . . . . . . . . . . . . . . . . . . . 10-82Appearance Care . . . . . . . . . . . 10-86

Service and Maintenance . . . 11-1General Information . . . . . . . . . . 11-1Maintenance Schedule . . . . . . . 11-2Special ApplicationServices . . . . . . . . . . . . . . . . . . . . 11-8

Additional Maintenanceand Care . . . . . . . . . . . . . . . . . . . . 11-8

Recommended Fluids,Lubricants, and Parts . . . . . . 11-11

Maintenance Records . . . . . . . 11-14

Technical Data . . . . . . . . . . . . . . . 12-1Vehicle Identification . . . . . . . . . 12-1Vehicle Data . . . . . . . . . . . . . . . . . . 12-2

Customer Information . . . . . . . 13-1Customer Information . . . . . . . . 13-1Reporting Safety Defects . . . . 13-12Vehicle Data Recording andPrivacy. . . . . . . . . . . . . . . . . . . . 13-13

OnStar . . . . . . . . . . . . . . . . . . . . . . . 14-1OnStar Overview. . . . . . . . . . . . . 14-1OnStar Services . . . . . . . . . . . . . . 14-2OnStar AdditionalInformation . . . . . . . . . . . . . . . . . . 14-5

Index . . . . . . . . . . . . . . . . . . . . . i-1


Introduction iii

The names, logos, emblems,slogans, vehicle model names, andvehicle body designs appearing inthis manual including, but not limitedto, GM, the GM logo, BUICK, theBUICK Emblem, and REGAL aretrademarks and/or service marks ofGeneral Motors LLC, itssubsidiaries, affiliates, or licensors.

This manual describes features thatmay or may not be on your specificvehicle either because they areoptions that you did not purchase ordue to changes subsequent to theprinting of this owner manual.

Please refer to the purchasedocumentation relating to yourspecific vehicle to confirm each ofthe features found on your vehicle.For vehicles first sold in Canada,substitute the name “GeneralMotors of Canada Limited” for BuickMotor Division wherever it appearsin this manual.

Keep this manual in the vehicle forquick reference.

Canadian Vehicle Owners

Propriétaires Canadiens

A French language manual can beobtained from your dealer, atwww.helminc.com, or from:

On peut obtenir un exemplaire dece guide en français auprès duconcessionnaire ou à l'adressesavant:

Helm, IncorporatedAttention: Customer Service47911 Halyard DrivePlymouth, MI 48170

Using this ManualTo quickly locate information aboutthe vehicle, use the Index in theback of the manual. It is analphabetical list of what is in themanual and the page number whereit can be found.

Litho in U.S.A.Part No. 22809075 B Second Printing ©2013 General Motors LLC. All Rights Reserved.


iv Introduction

Danger, Warnings, andCautions

{ Danger

Text marked{ Danger providesinformation on risk of fatal injury.Disregarding this information mayendanger life.

{ Warning

Text marked{ Warning providesinformation on risk of accident orinjury. Disregarding thisinformation may lead to injury.

{ Caution

Text marked{ Caution providesinformation that may indicate ahazard that could result in injuryor death. It could also result inpossible damage to the vehicle.

A circle with a slash through it is asafety symbol which means “DoNot,” “Do not do this,” or “Do not letthis happen.”

SymbolsThe vehicle has components andlabels that use symbols instead oftext. Symbols are shown along withthe text describing the operation or

information relating to a specificcomponent, control, message,gauge, or indicator.

M : This symbol is shown whenyou need to see your owner manualfor additional instructions orinformation.

* : This symbol is shown whenyou need to see a service manualfor additional instructions orinformation.

Vehicle Symbol Chart

Here are some additional symbolsthat may be found on the vehicleand what they mean. For moreinformation on the symbol, refer tothe Index.

9 : Airbag Readiness Light

# : Air Conditioning

! : Antilock Brake System (ABS)

g : Audio Steering Wheel Controlsor OnStar® (if equipped)

$ : Brake System Warning Light

" : Charging System


Introduction v

I : Cruise Control

B : Engine Coolant Temperature

O : Exterior Lamps

g : First Responder

# : Fog Lamps

. : Fuel Gauge

+ : Fuses

3 : Headlamp High/Low-BeamChanger

( : Heated Steering Wheel

j : LATCH System ChildRestraints

* : Malfunction Indicator Lamp

: : Oil Pressure

O : Power

/ : Remote Vehicle Start

> : Safety Belt Reminders

7 : Tire Pressure Monitor

d : Traction Control/StabiliTrak®

M : Windshield Washer Fluid


vi Introduction

2 NOTES


In Brief 1-1

In Brief

Instrument PanelInstrument Panel . . . . . . . . . . . . . . 1-2

Initial Drive InformationInitial Drive Information . . . . . . . . 1-4Remote Keyless Entry (RKE)System . . . . . . . . . . . . . . . . . . . . . . 1-4

Remote Vehicle Start . . . . . . . . . 1-6Door Locks . . . . . . . . . . . . . . . . . . . 1-6Trunk Release . . . . . . . . . . . . . . . . 1-7Windows . . . . . . . . . . . . . . . . . . . . . . 1-7Seat Adjustment . . . . . . . . . . . . . . 1-7Memory Features . . . . . . . . . . . . . 1-9Heated Seats . . . . . . . . . . . . . . . . . 1-9Head Restraint Adjustment . . . . 1-9Safety Belts . . . . . . . . . . . . . . . . . . 1-10Passenger SensingSystem . . . . . . . . . . . . . . . . . . . . . 1-10

Mirror Adjustment . . . . . . . . . . . . 1-10Steering WheelAdjustment . . . . . . . . . . . . . . . . . 1-11

Interior Lighting . . . . . . . . . . . . . . 1-11

Exterior Lighting . . . . . . . . . . . . . 1-12Windshield Wiper/Washer . . . . 1-13Climate Controls . . . . . . . . . . . . . 1-14Transmission . . . . . . . . . . . . . . . . 1-15

Vehicle FeaturesSteering Wheel Controls . . . . . 1-15Cruise Control . . . . . . . . . . . . . . . 1-15Infotainment System . . . . . . . . . 1-16Driver InformationCenter (DIC) . . . . . . . . . . . . . . . 1-16

Forward Collision Alert (FCA)System . . . . . . . . . . . . . . . . . . . . . 1-16

Lane DepartureWarning (LDW) . . . . . . . . . . . . . 1-17

Lane Change Alert (LCA) . . . . 1-17Rear VisionCamera (RVC) . . . . . . . . . . . . . 1-17

Ultrasonic Parking Assist . . . . 1-17Active Emergency BrakingSystem . . . . . . . . . . . . . . . . . . . . . 1-17

Power Outlets . . . . . . . . . . . . . . . 1-18Universal Remote System . . . 1-18Sunroof . . . . . . . . . . . . . . . . . . . . . . 1-18

eAssist FeatureseAssist® Overview . . . . . . . . . . . 1-19High Voltage SafetyInformation . . . . . . . . . . . . . . . . . 1-20

Automatic Engine Start/StopFeature . . . . . . . . . . . . . . . . . . . . . 1-20

Regenerative Braking . . . . . . . . 1-20Battery . . . . . . . . . . . . . . . . . . . . . . . 1-21Service . . . . . . . . . . . . . . . . . . . . . . 1-21

Performance and MaintenanceTraction Control/ElectronicStability Control . . . . . . . . . . . . 1-21

Tire Pressure Monitor . . . . . . . . 1-22Engine Oil Life System . . . . . . 1-22E85 or FlexFuel . . . . . . . . . . . . . . 1-23Driving for Better FuelEconomy . . . . . . . . . . . . . . . . . . . 1-23

Roadside AssistanceProgram . . . . . . . . . . . . . . . . . . . . 1-23

OnStar® . . . . . . . . . . . . . . . . . . . . . 1-23


1-2 In Brief

Instrument Panel


In Brief 1-3

1. Exterior Lamp Controls onpage 6-1.

Fog Lamps on page 6-4 (IfEquipped).

Instrument Panel IlluminationControl on page 6-4.

2. Air Vents on page 8-6.

3. Turn Signal Lever. See Turn andLane-Change Signals onpage 6-3.

4. Cruise Control on page 9-39 (IfEquipped).

Adaptive Cruise Control onpage 9-41 (If Equipped).

Heated Steering Wheel onpage 5-3 (If Equipped).

Forward Collision Alert (FCA)System on page 9-52 (IfEquipped).

5. Instrument Cluster (BaseCluster) on page 5-9 orInstrument Cluster (UplevelCluster) on page 5-13.

Driver Information CenterDisplay. See Driver InformationCenter (DIC) (Base LevelCluster) on page 5-33 or DriverInformation Center (DIC)(Uplevel Cluster) on page 5-35.

6. Steering Wheel Controls onpage 5-2 (If Equipped).

Driver Information Center (DIC)Controls. See Driver InformationCenter (DIC) (Base LevelCluster) on page 5-33 or DriverInformation Center (DIC)(Uplevel Cluster) on page 5-35.

7. Windshield Wiper/Washer onpage 5-3.

8. Infotainment on page 7-1.

9. Traction Control/ElectronicStability Control on page 9-36.

Hazard Warning Flashers onpage 6-3.

GS/Tour/Sport Button (IfEquipped). See Selective RideControl on page 9-38.

Rear Parking Assist, IfEquipped. See AssistanceSystems for Parking or Backingon page 9-49.

Lane Departure Warning (LDW)on page 9-58 (If Equipped).

10. Light Sensor. See AutomaticHeadlamp System onpage 6-2.

11. Instrument Panel Storage onpage 4-1.

12. Data Link Connector (DLC)(Out of View). See MalfunctionIndicator Lamp on page 5-21.


1-4 In Brief

13. Hood Release. See Hood onpage 10-4.

14. Steering Wheel Adjustment onpage 5-2.

15. Horn on page 5-3.

16. Ignition Positions (Key Access)on page 9-15 or IgnitionPositions (Keyless Access) onpage 9-17.

17. Heated Front Seats onpage 3-8 (If Equipped).

18. Dual Automatic Climate ControlSystem on page 8-1.

19. Shift Lever. See AutomaticTransmission on page 9-27 orManual Transmission onpage 9-30.

20. Electric Parking Brake. SeeParking Brake on page 9-33.

21. Passenger Safety BeltReminder Light. See SafetyBelt Reminders on page 5-19.

Initial DriveInformationThis section provides a briefoverview about some of theimportant features that may or maynot be on your specific vehicle.

For more detailed information, referto each of the features which can befound later in this owner manual.

Remote Keyless Entry(RKE) SystemThe RKE transmitter may work up to60 m (197 ft) away from the vehicle.


In Brief 1-5

The RKE transmitter can have oneof the two symbols for the remotetrunk release.

With Remote Start Shown

Press the button to extend the key.The key can be used for all locks.This key is also used for theignition, if the vehicle does not havepushbutton start.

K : Press to unlock the driver dooror all doors.

Q : Press to lock all doors.

Lock and unlock feedback can bepersonalized.

V orY : Press and hold torelease the trunk.

7 : Press and release to initiatevehicle locator. Press and hold for atleast three seconds to sound thepanic alarm. Press again to cancelthe panic alarm.


1-6 In Brief

See Keys on page 2-1 and RemoteKeyless Entry (RKE) SystemOperation on page 2-3.

Remote Vehicle StartIf equipped with this feature, theengine can be started from outsidethe vehicle.

Starting the Vehicle

1. Aim the RKE transmitter at thevehicle.

2. Press and release Q.3. Immediately after completing

Step 2, press and hold/ for atleast four seconds or until theturn signal lamps flash.

When the engine starts, the parkinglamps will turn on and remain on aslong as the engine is running. Thedoors will be locked and the climatecontrol system may come on.

The engine will continue to run for10 minutes. Repeat the steps for a10-minute time extension. Remotestart can be extended only once.

Canceling a Remote Start

To cancel a remote start, do one ofthe following:. Aim the RKE transmitter at the

vehicle and press and hold/until the parking lamps turn off.

. Turn on the hazard warningflashers.

. Turn the vehicle on and then off.

See Remote Vehicle Start onpage 2-9.

Door LocksTo lock or unlock the door fromoutside the vehicle, press Q or Kon the Remote Keyless Entry (RKE)transmitter or use the key in thedriver door.

From inside the vehicle pull once onthe door handle to unlock it. Pullingthe door handle again unlatches it.

Pushing down the manual lock knobon the driver door will lock alldoors. Pushing down the manuallock knob on a passenger door willlock that door only.

See Door Locks on page 2-11 foradditional information.

Power Door Locks

K : Press to unlock the doors.

Q : Press to lock the doors.

See Vehicle Personalization onpage 5-48 for more information.


In Brief 1-7

Trunk Release

To open the trunk:

Press| on the driver door.

PressV orY on the RemoteKeyless Entry (RKE) transmitter.

Press the touch pad on the trunkunder the vehicle emblem afterunlocking all doors.

See Trunk on page 2-14 foradditional information.

Windows

The power window switches are onthe driver door. Each passengerdoor has a switch that controls onlythat window.

Press the switch to lower thewindow. Pull the front of the switchup to raise it. See Power Windowson page 2-20.

Seat Adjustment

Manual Seats

1. Seatback Recline Lever

2. Height Adjustment Switch

3. Seat Position Handle

To adjust the seat position:

1. Pull the handle (3) under thefront of the seat cushion.

2. Slide the seat to the desiredposition and release thehandle (3).


1-8 In Brief

3. Try to move the seat back andforth to be sure it is locked inplace.

Press and hold the top or bottom ofthe switch (2) to raise or lower theseat. Release the switch (2) whenthe desired height is reached.

To raise or recline the seatback, usethe lever (1) on the outboard side ofthe seat.

See Seat Adjustment on page 3-3and Reclining Seatbacks onpage 3-5.

Power Seats

1. Seat Adjustment Control

2. Reclining Seatbacks

3. Lumbar Adjustment

To adjust a power seat, if equipped:. Move the seat forward or

rearward by sliding thecontrol (1) forward or rearward.

. Raise or lower the front or rearpart of the seat cushion bymoving the front or rear of thecontrol (1) up or down.

. Raise or lower the entire seat bymoving the control (1) upor down.

See Power Seat Adjustment onpage 3-4.

To raise or recline the seatback, tiltthe top of the control (2) forward orrearward. See Reclining Seatbackson page 3-5.

Press the front or rear of thecontrol (3) to increase or decreaselumbar support. Press and hold thetop or bottom of the control (3) toraise or lower lumbar support. SeeLumbar Adjustment on page 3-4.


In Brief 1-9

Memory Features

If equipped, the MEM, “1,” and “2”buttons on the outboard side of thedriver seat are used to manuallysave and recall the driver seat andoutside mirror positions.

See Memory Seats on page 3-6 andVehicle Personalization onpage 5-48.

Heated Seats

If equipped, the buttons are part ofthe climate control system on thecenter stack. To operate, the ignitionand the climate control system mustbe on. If the climate control systemis off, press the O button to turnit on.

Press M or L to heat the driver orpassenger seat.

Press the button once for thehighest setting. With each press ofthe button, the seat will change to

the next lower setting, and then tothe off setting. The lights near theheated seat symbol on the displayindicate three for the highest settingand one for the lowest.

See Heated Seats on page 1-9.

Head RestraintAdjustmentDo not drive until the head restraintsfor all occupants are installed andadjusted properly.

To achieve a comfortable seatingposition, change the seatbackrecline angle as little as necessarywhile keeping the seat and the headrestraint height in the properposition.

See Head Restraints on page 3-2and Seat Adjustment on page 3-3.


1-10 In Brief

Safety Belts

Refer to the following sections forimportant information on how to usesafety belts properly:. Safety Belts on page 3-10.. How to Wear Safety Belts

Properly on page 3-12.. Lap-Shoulder Belt on page 3-12.. Lower Anchors and Tethers for

Children (LATCH System) onpage 3-38.

Passenger SensingSystem

The passenger sensing systemturns off the front outboardpassenger frontal airbag undercertain conditions. No other airbagis affected by the passengersensing system.

The passenger airbag statusindicator will be visible on theinstrument panel when the vehicle isstarted. See Passenger SensingSystem on page 3-24 for importantinformation.

Mirror Adjustment

Interior Mirrors

Adjustment

Adjust the rearview mirror for a clearview of the area behind yourvehicle.

Automatic Dimming RearviewMirror

If equipped, the mirror automaticallydims to reduce glare of headlampsfrom behind. The dimming featurecomes on when the vehicle isstarted. See Automatic DimmingRearview Mirror on page 2-20


In Brief 1-11

Exterior Mirrors

To adjust a mirror:

1. Move the selector switch to L(Left) or R (Right) to choose thedriver or passenger mirror.

2. Press the arrows on the controlpad to move each mirror in thedesired direction.

3. Return the selector switch to thecenter position.

See Power Mirrors on page 2-19.

Folding Mirrors

The outside mirrors can be foldedinward to prevent damage whengoing through an automatic carwash. To fold, pull the mirror towardthe vehicle. Push the mirror outwardto return it to the original position.

Steering WheelAdjustment

To adjust the steering wheel:

1. Pull the lever down.

2. Move the steering wheel upor down.

3. Pull or push the steering wheelcloser or away from you.

4. Pull the lever up to lock thesteering wheel in place.

Do not adjust the steering wheelwhile driving.

Interior LightingDome Lamps

The interior lamps control in theoverhead console controls both thefront and rear interior lamps.

( : Turns the lamps off.


1-12 In Brief

H : Turns the lamps on when anydoor is opened.

' : Keeps the lamps on allthe time.

Reading Lamps

There are front and rear readinglamps.

The front reading lamps are in theoverhead console.

The rear reading lamps are in theheadliner.

# or$ : Press to turn each lampon or off.

For more information, see DomeLamps on page 6-5.

Exterior Lighting

The exterior lamp control is on theinstrument panel on the outboardside of the steering wheel.

O : Turns off the exterior lamps.The knob returns to the AUTOposition after it is released. Turn toO again to reactivate theAUTO mode.

In Canada, the headlamps willautomatically reactivate once thevehicle is shifted out of P (Park).

AUTO: Automatically turns theexterior lamps on and off,depending on outside lighting.


In Brief 1-13

; : Turns on the parking lampsincluding all lamps, except theheadlamps.

2 : Turns on the headlampstogether with the parking lamps andinstrument panel lights.

See:. Exterior Lamp Controls on

page 6-1. Daytime Running Lamps (DRL)

on page 6-2. Fog Lamps on page 6-4, If

Equipped.

Windshield Wiper/Washer

The windshield wiper/washer leveris on the right side of the steeringcolumn. With the ignition in ACC/ACCESSORY or ON/RUN, movethe windshield wiper lever to selectthe wiper speed.

HI: Use for fast wipes.

LO: Use for slow wipes.

INT: Move the lever up to INT forintermittent wipes, then turn the3 INT band up for more frequentwipes or down for less frequentwipes.

OFF: Use to turn the wipers off.

8 : For a single wipe, briefly movethe wiper lever down. For severalwipes, hold the wiper lever down.

nL : Pull the windshield wiperlever toward you to spray windshieldwasher fluid and activate the wipers.

See Windshield Wiper/Washer onpage 5-3.


1-14 In Brief

Climate ControlsThe heating, cooling, and ventilation for the vehicle can be controlled withthis system.

1. Driver and PassengerTemperature Controls

2. Heated Front Seats (IfEquipped)

3. Defrost

4. Air Delivery Mode Controls

5. Fan Control

6. Power

7. Rear Window Defogger

8. A/C (Air Conditioning)

9. Recirculation

10. AUTO (Automatic Operation)

11. SYNC (SynchronizedTemperature)

See Dual Automatic Climate ControlSystem on page 8-1.


In Brief 1-15

Transmission

Automatic Transmission

P: Park

R: Reverse

N: Neutral

D: Drive

Manual Mode

Driver Shift Control (DSC) allowsyou to shift an automatictransmission similar to a manualtransmission. To use the DSCfeature:

1. Move the shift lever to the leftfrom D (Drive) into the side gatemarked with (+) and (−).

2. Press the shift lever forward toupshift or rearward to downshift.

See Automatic Transmission onpage 9-27.

Vehicle Features

Steering Wheel ControlsThe infotainment system can beoperated by using the steeringwheel controls. See "SteeringWheel Controls" in the infotainmentmanual.

Cruise Control

5 : Press to turn cruise control onor off. A white indicator comes on inthe instrument cluster.


1-16 In Brief

RES/+: Press the control up brieflyto make the vehicle resume to apreviously set speed, or holdupwards to accelerate. If cruisecontrol is already active, use toincrease vehicle speed.

SET/−: Press the control downbriefly to set the speed and activatecruise control. If cruise control isalready active, use to decreasevehicle speed.

* : Press to disengage cruisecontrol without erasing the setspeed from memory.

See Cruise Control on page 9-39and Adaptive Cruise Control onpage 9-41 (If Equipped).

Infotainment SystemSee the infotainment manual forinformation on the radio, audioplayers, phone, navigation system,and voice or speech recognition.It also includes information onsettings.

Driver InformationCenter (DIC)The DIC display is in the instrumentcluster. It shows the status of manyvehicle systems.

y orz : Press to move up ordown in a list.

S or T : Press S to openapplication menus on the left. PressT to open interaction menus on theright.

V : Press to open a menu or selecta menu item. Press and hold toreset values on certain screens.

See Driver Information Center (DIC)(Base Level Cluster) on page 5-33or Driver Information Center (DIC)(Uplevel Cluster) on page 5-35.

Forward Collision Alert(FCA) SystemIf equipped, FCA may help avoid orreduce the harm caused byfront-end crashes. FCA provides agreen indicator,V, when a vehicleis detected ahead. This indicatordisplays amber if you follow avehicle much too closely. Whenapproaching a vehicle ahead tooquickly, FCA provides a red alertand rapidly beeps.

See Forward Collision Alert (FCA)System on page 9-52.


In Brief 1-17

Lane DepartureWarning (LDW)If equipped, LDW is intended to helpavoid unintentional lane departuresat speeds of 56 km/h (35 mph) orgreater. LDW uses a camera sensorto detect the lane markings. TheLDW indicator, @, appears green ifa lane marking is detected. If thevehicle departs the lane, theindicator will change to amber andflash. In addition, beeps will sound.

See Lane Departure Warning (LDW)on page 9-58.

Lane Change Alert (LCA)If equipped, the LCA system is alane-changing aid that assistsdrivers with avoiding lane changecrashes that occur with vehicles inthe side blind zone (or spot) areasor with vehicles rapidly approachingthese areas from behind. The LCAwarning display will light up in thecorresponding outside side mirrorand will flash if the turn signal is on.

The Side Blind Zone Alert (SBZA)system is included as part of theLCA system.

See Side Blind Zone Alert (SBZA)on page 9-55 and Lane ChangeAlert on page 9-56.

Rear VisionCamera (RVC)If equipped, RVC displays a view ofthe area behind the vehicle on thecenter stack display when thevehicle is shifted into R (Reverse).

See Assistance Systems for Parkingor Backing on page 9-49.

Ultrasonic Parking AssistIf equipped, Ultrasonic Rear ParkingAssist (URPA) uses sensors on therear bumper to assist with parkingand avoiding objects while inR (Reverse). It operates at speedsless than 8 km/h (5 mph). URPAmay display a warning triangle onthe Rear Vision Camera screen anda graphic on the instrument cluster

to provide the object distance. Inaddition, multiple beeps may occurif very close to an object.

The vehicle may also have the FrontParking Assist system.

See Driver Assistance Systems onpage 9-49.

Active EmergencyBraking SystemIf the vehicle has Adaptive CruiseControl (ACC) it also has the ActiveEmergency Braking System, whichincludes Intelligent BrakeAssist (IBA) and the AutomaticCollision Preparation (ACP) System.These systems can provide a boostto braking or automatically brake thevehicle to help avoid or lessen theseverity of crashes while movingforward.

See Active Emergency BrakingSystem on page 9-54.


1-18 In Brief

Power OutletsThe accessory power outlet can beused to plug in electrical equipment,such as a cell phone or MP3 player.

There are two 12-volt accessorypower outlets located:. On the center stack next to the

ashtray.. Inside the center console.

The outlet is powered when theignition is in ON/RUN or ACC/ACCESSORY, or until the driverdoor is opened within 10 minutes ofturning off the vehicle. See RetainedAccessory Power (RAP) onpage 9-24.

Open the protective cover to use theaccessory power outlet.

See Power Outlets on page 5-5.

Universal Remote System

If equipped, this system provides away to replace up to three remotecontrol transmitters used to activatedevices such as garage dooropeners, security systems, andhome automation devices.

Read the instructions completelybefore attempting to program theUniversal Remote system. Becauseof the steps involved, it may behelpful to have another personavailable to assist with programmingthe Universal Remote system.

See Universal Remote System onpage 5-54.

Sunroof

For vehicles with a sunroof, thesunroof only operates when theignition is in ON/RUN or ACC/ACCESSORY or in RetainedAccessory Power (RAP). SeeRetained Accessory Power (RAP)on page 9-24.

To open or close the sunroof, pressswitch (1) to the first detent position.

To express open or close thesunroof with the safety functionenabled, press the open or closesunroof switch (1) to the second


In Brief 1-19

detent position and release. To stopthe movement, press the switchagain.

To automatically tilt or close thesunroof, press the tilt open or closesunroof switch (2).

If an object is in the path of thesunroof while it is closing, theanti-pinch feature will detect theobject and stop the sunroof. Thesunroof will then return to thefull-open or vent position.

The sunroof glass panel cannot beopened or closed if the vehicle hasan electrical failure.

See Sunroof on page 2-22.

eAssist Features

eAssist® OverviewIf the vehicle has eAssist, there areseveral additional features thatcontribute to increased efficiency.

Vehicles with eAssist have anautomatic engine start/stop feature.This feature saves fuel by shuttingthe engine off when the vehicle isstopped. When the engine shuts offautomatically, all the accessorieswill continue to operate normally. Invery hot or cold conditions, theengine will only shut offautomatically part of the time. SeeStarting the Engine on page 9-18.

There are two air conditioningsettings available. The comfortsetting maximizes cabin comfort.The eco setting maximizesefficiency allowing more frequent,and longer engine stops than thecomfort setting. See Dual AutomaticClimate Control System onpage 8-1.

This vehicle has a Hill Start Assist(HSA) feature, which may be usefulwhen the vehicle is stopped on agrade. See Hill Start Assist (HSA)on page 9-35.

Vehicles with eAssist have a slightlydifferent instrument cluster, whichincludes an AUTO STOP indicatoron the tachometer. See InstrumentCluster (Base Cluster) on page 5-9or Instrument Cluster (UplevelCluster) on page 5-13.

The eAssist system uses a highvoltage battery, which is cooled withair drawn from the vehicle interior.


1-20 In Brief

The cold air intake for the battery islocated behind the rear seat, on thefiller panel. Do not cover the intake.See Battery on page 10-27.

High Voltage SafetyInformationVehicles with eAssist have astandard 12-volt battery and a highvoltage battery. Only a trainedservice technician with the properknowledge and tools should inspect,test, or replace the high voltagebattery. See your dealer if the highvoltage battery needs service.

In emergency situations, firstresponders can cut the two clearlylabeled cut points in the enginecompartment to disable the highvoltage battery and air bag systems— do not cut the high voltage cable.

Automatic Engine Start/Stop FeatureVehicles with eAssist have anautomatic engine start/stop feature.After the engine is started and hasreached operating temperature, theauto stop feature may cause theengine to turn off when the brakepedal is applied and the vehiclecomes to a complete stop. Whenthe brake pedal is released, or theaccelerator pedal is applied, theengine will restart. The engine willcontinue to run until the nextauto stop.

To restart the engine during the autostop, release the brake pedal orpress the accelerator pedal. The

engine starts immediately. Thevehicle continues to run until thenext stop.

AUTO STOP on the tachometersignifies that the engine is in autostop mode. See Tachometer onpage 5-16 for more information.A chime will sound when the driverdoor is opened while in auto stopmode. Remember to shift to P (Park)and turn the ignition to LOCK/OFFbefore exiting the vehicle.

See Starting the Engine onpage 9-18.

Regenerative BrakingRegenerative braking takes some ofthe energy from the moving vehicleand turns it into electrical energy.This energy is then stored in thevehicle's high voltage batterysystem, contributing to increasedfuel efficiency.

The system works whenever theaccelerator pedal is released, andincreases the energy captured asmore brake pedal is applied.


In Brief 1-21

BatteryThis vehicle has a standard 12-voltbattery. Refer to the replacementnumber on the original battery labelwhen a new standard 12-volt batteryis needed.

Vehicles with eAssist also have ahigh voltage battery. Only a trainedservice technician with the properknowledge and tools should inspect,test, or replace the high voltagebattery. See your dealer if the highvoltage battery needs service. SeeBattery on page 10-27.

ServiceNever try to do your own service oneAssist components. You can beinjured and the vehicle can bedamaged if you try to do your ownservice work. Service and repair ofthese high voltage componentsshould only be performed by atrained service technician with theproper knowledge and tools. SeeDoing Your Own Service Work onpage 10-3.

Performance andMaintenance

Traction Control/Electronic StabilityControlThe traction control system limitswheel slip. The system turns onautomatically every time the vehicleis started.

The StabiliTrak system assists withdirectional control of the vehicle indifficult driving conditions. Thesystem turns on automatically everytime the vehicle is started.. To turn off traction control, press

and release the TCS/StabiliTrakbutton on the center stack. iilluminates and the appropriateDIC message is displayed. SeeRide Control System Messageson page 5-45.

. Press and release the TCS/StabiliTrak button again to turnon traction control.

. To turn off both traction controland StabiliTrak, press and holdthe TCS/StabiliTrak button, onthe center stack, until i and gilluminate in the instrumentcluster and the appropriate DICmessage is displayed. See RideControl System Messages onpage 5-45.

. Press and release the TCS/StabiliTrak button to turn on bothsystems.

See Traction Control/ElectronicStability Control on page 9-36.


1-22 In Brief

Tire Pressure MonitorThis vehicle may have a TirePressure Monitor System (TPMS).

The low tire pressure warning lightalerts to a significant loss inpressure of one of the vehicle'stires. If the warning light comes on,stop as soon as possible and inflatethe tires to the recommendedpressure shown on the Tire andLoading Information label. SeeVehicle Load Limits on page 9-10.The warning light will remain on untilthe tire pressure is corrected.

The low tire pressure warning lightmay come on in cool weather whenthe vehicle is first started, and thenturn off as the vehicle is driven. Thismay be an early indicator that the

tire pressures are getting low andthe tires need to be inflated to theproper pressure.

The TPMS does not replace normalmonthly tire maintenance. Maintainthe correct tire pressures.

See Tire Pressure Monitor Systemon page 10-50.

Engine Oil Life SystemThe engine oil life system calculatesengine oil life based on vehicle useand displays the CHANGE ENGINEOIL SOON message when it is timeto change the engine oil and filter.The oil life system should be resetto 100% only following an oilchange.

Resetting the Oil Life System

1. Using the DIC controls on theright side of the steering wheel,display REMAINING OIL LIFEon the DIC. See DriverInformation Center (DIC) (BaseLevel Cluster) on page 5-33 orDriver Information Center (DIC)(Uplevel Cluster) on page 5-35.When remaining oil life is low,the CHANGE ENGINE OILSOON message will appear onthe display. See Engine OilMessages on page 5-42.

2. Press V on the DIC controls andhold down for a few seconds toclear the CHANGE ENGINE OILSOON message and reset theoil life at 100%.

Be careful not to reset the oil lifedisplay accidentally at any timeother than after the oil ischanged. It cannot be resetaccurately until the next oilchange.

See Engine Oil Life System onpage 10-13.


In Brief 1-23

E85 or FlexFuelVehicles with a yellow fuel cap canuse either unleaded gasoline orethanol fuel containing up to 85%ethanol (E85). See E85 or FlexFuelon page 9-62. For all other vehicles,use only the unleaded gasolinedescribed under RecommendedFuel on page 9-60.

Driving for Better FuelEconomyDriving habits can affect fuelmileage. Here are some driving tipsto get the best fuel economypossible.. Avoid fast starts and accelerate

smoothly.. Brake gradually and avoid

abrupt stops.. Avoid idling the engine for long

periods of time.. When road and weather

conditions are appropriate, usecruise control.

. Always follow posted speedlimits or drive more slowly whenconditions require.

. Keep vehicle tires properlyinflated.

. Combine several trips into asingle trip.

. Replace the vehicle's tires withthe same TPC Spec numbermolded into the tire's sidewallnear the size.

. Follow recommended scheduledmaintenance.

Roadside AssistanceProgramU.S.: 1-800-252-1112

TTY Users (U.S. Only):1-888-889-2438

Canada: 1-800-268-6800

New Buick owners are automaticallyenrolled in the Roadside AssistanceProgram.

See Roadside Assistance Programon page 13-5.

OnStar®

If equipped, this vehicle has acomprehensive, in-vehicle systemthat can connect to a live Advisorfor Emergency, Security, Navigation,Connection, and DiagnosticServices. See OnStar Overview onpage 14-1.


1-24 In Brief

2 NOTES


Keys, Doors, and Windows 2-1

Keys, Doors, andWindows

Keys and LocksKeys . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1Remote Keyless Entry (RKE)System . . . . . . . . . . . . . . . . . . . . . . 2-2

Remote Keyless Entry (RKE)System Operation . . . . . . . . . . . 2-3

Remote Vehicle Start . . . . . . . . . 2-9Door Locks . . . . . . . . . . . . . . . . . . 2-11Power Door Locks . . . . . . . . . . . 2-12Delayed Locking . . . . . . . . . . . . . 2-12Automatic Door Locks . . . . . . . 2-12Lockout Protection . . . . . . . . . . . 2-12Safety Locks . . . . . . . . . . . . . . . . . 2-13

DoorsTrunk . . . . . . . . . . . . . . . . . . . . . . . . 2-14

Vehicle SecurityVehicle Security . . . . . . . . . . . . . . 2-16Vehicle Alarm System . . . . . . . 2-16

Immobilizer . . . . . . . . . . . . . . . . . . 2-17Immobilizer Operation (KeyAccess) . . . . . . . . . . . . . . . . . . . . 2-17

Immobilizer Operation(Keyless Access) . . . . . . . . . . . 2-18

Exterior MirrorsConvex Mirrors . . . . . . . . . . . . . . 2-19Power Mirrors . . . . . . . . . . . . . . . . 2-19Folding Mirrors . . . . . . . . . . . . . . . 2-19Heated Mirrors . . . . . . . . . . . . . . . 2-20Reverse Tilt Mirrors . . . . . . . . . . 2-20

Interior MirrorsInterior Rearview Mirrors . . . . . 2-20Automatic Dimming RearviewMirror . . . . . . . . . . . . . . . . . . . . . . . 2-20

WindowsWindows . . . . . . . . . . . . . . . . . . . . . 2-20Power Windows . . . . . . . . . . . . . 2-21Sun Visors . . . . . . . . . . . . . . . . . . . 2-22

RoofSunroof . . . . . . . . . . . . . . . . . . . . . . 2-23

Keys and Locks

Keys

{ Warning

Leaving children in a vehicle withan ignition key or RemoteKeyless Entry (RKE) transmitter isdangerous and children or otherscould be seriously injured orkilled. They could operate thepower window or other controls ormake the vehicle move. Thewindows will function with the keyin the ignition or with the RKEtransmitter in the vehicle, andchildren or others could be caughtin the path of a closing window.Do not leave children in a vehiclewith the ignition key or an RKEtransmitter.


2-2 Keys, Doors, and Windows

The key that is part of the RemoteKeyless Entry (RKE) transmitter canbe used for the ignition and all locksif the vehicle is a Key Accessvehicle. If the vehicle has thekeyless ignition, the key can beused for the locks.

Press the button on the RKEtransmitter to extend the key. Pressthe button and the key blade toretract the key.

If the vehicle has an ignition and itbecomes difficult to turn the key,inspect the key blade for debris.Periodically clean with a brushor pick.

See your dealer if a new key isneeded.

If locked out of the vehicle, seeRoadside Assistance Program onpage 13-5.

With an active OnStar subscription,an OnStar Advisor may remotelyunlock the vehicle. See OnStarOverview on page 14-1.

Remote Keyless Entry(RKE) SystemSee Radio Frequency Statement onpage 13-15.

If there is a decrease in the RKEoperating range:. Check the distance. The

transmitter may be too far fromthe vehicle.

. Check the location. Othervehicles or objects may beblocking the signal.

. Check the transmitter's battery.See “Battery Replacement” laterin this section.

. If the transmitter is still notworking correctly, see yourdealer or a qualified technicianfor service.



Remote Keyless Entry(RKE) System OperationThe Keyless Access system allowsfor vehicle entry when thetransmitter is within 1 m (3 ft). See“Keyless Access Operation” later inthis section.

The transmitter functions may workup to 60 m (197 ft) away from thevehicle.

Keep in mind that other conditions,such as those previously stated, canimpact the performance of thetransmitter.

The RKE transmitter can have oneof the two symbols for the remotetrunk release.

With Remote Start Shown

K (Unlock): Press to unlock thedriver door or all doors. See “AutoDoor Unlock” under VehiclePersonalization on page 5-48.

The turn signal indicators may flashto indicate unlocking. See “RemoteUnlock Light Feedback” underVehicle Personalization onpage 5-48.

Pressing K will disarm thetheft-deterrent system. See VehicleAlarm System on page 2-16.

Q (Lock): Press to lock all doors.



The turn signal indicators may flashand/or the horn may sound toindicate locking. See “Remote LockFeedback” under VehiclePersonalization on page 5-48.

If the driver door is open when Q ispressed, all doors lock except thedriver door, if Unlocked Door AntiLock Out is enabled through vehiclepersonalization.

If the passenger door is open whenQ is pressed, all doors lock.

Pressing Q may also arm thetheft-deterrent system. See VehicleAlarm System on page 2-16.

V orY (Remote TrunkRelease): Press and hold torelease the trunk.

7 (Vehicle Locator/PanicAlarm): Press and release onetime to initiate vehicle locator. Theexterior lamps flash and the hornchirps three times.

Press and hold 7 for at leastthree seconds to sound the panicalarm. The horn sounds and theturn signals flash for about30 seconds until 7 is pressed againor the vehicle is started.

/ (Remote Vehicle Start):If equipped, press and release Qand then immediately press andhold/ for at least four seconds tostart the engine from outside thevehicle using the RKE transmitter.See Remote Vehicle Start onpage 2-9.

The RKE transmitter buttons will notoperate when the key is in theignition

Keyless Access Operation

Some vehicles have a KeylessAccess system that lets you lockand unlock the doors and accessthe trunk without removing the RKEtransmitter from your pocket, purse,briefcase, etc. The RKE transmittershould be within 1 m (3 ft) of the

door or trunk being opened.If equipped, there will be buttons onthe outside front door handles.

The Keyless Access can beprogrammed to unlock all doors onthe first lock/unlock press from thedriver door. See VehiclePersonalization on page 5-48.

Keyless Unlocking/Locking fromthe Driver Door

When the doors are locked and theRKE transmitter is within 1 m (3 ft)of the driver door handle, pressingthe lock/unlock button on the driverdoor handle will unlock the driverdoor. If the lock/unlock button ispressed again within five seconds,all passenger doors will unlock. Pullthe door handle to unlatch the door.



Driver Side Shown, PassengerSimilar

Pressing the lock/unlock button willcause all doors to lock if any of thefollowing occur:. It has been more than

five seconds since the first lock/unlock button press.

. Two lock/unlock button presseswere used to unlock all doors.

. Any vehicle door has openedand all doors are now closed.

Keyless Unlocking/Locking fromthe Passenger Doors

When the doors are locked and theRKE transmitter is within 1 m (3 ft)of the passenger door handle,pressing the lock/unlock button onthe passenger door handle willunlock all doors.

Pressing the lock/unlock button willcause all doors to lock if any of thefollowing occur:. The lock/unlock button was used

to unlock all doors.. Any vehicle door has opened

and all doors are now closed.

Passive Locking

If equipped with Keyless Access,this feature will lock the vehicleseveral seconds after all doors areclosed, if the vehicle is off and atleast one RKE transmitter has beenremoved from the interior or noneremain in the interior.

Temporary Disable PassiveLocking Feature

Temporarily disable the passivelocking by pressing and holding Kon the interior door switch with adoor open for at least four seconds,or until three chimes are heard.Passive locking will then remaindisabled until Q on the interior dooris pressed, or until the vehicle isturned on.

To customize the doors toautomatically lock when exiting thevehicle, see “Remote Lock, Unlock,Start” under Vehicle Personalizationon page 5-48.

Keyless Trunk Opening

Press the touch pad under theemblem to open the trunk if the RKEtransmitter is within 1 m (3 ft).

Programming Transmitters tothe Vehicle

Only RKE transmitters programmedto the vehicle will work. If atransmitter is lost or stolen, a



replacement can be purchased andprogrammed through your dealer.The vehicle can be reprogrammedso that lost or stolen transmitters nolonger work. Any remainingtransmitters will need to bereprogrammed. Each vehicle canhave up to eight transmittersmatched to it.

Programming with a RecognizedTransmitter (Key Vehicles Only)

To program a new key:

1. Insert the original, alreadyprogrammed key in the ignitionand turn to the key to the ON/RUN position.

2. Turn the key to LOCK/OFF, andremove the key.

3. Insert the new key to beprogrammed and turn it to theON/RUN position withinfive seconds.

The security light will turn offonce the key has beenprogrammed.

4. Repeat Steps 1–3 if additionalkeys are to be programmed.

If a key is lost or damaged, see yourdealer to have a new key made.

Programming without aRecognized Transmitter (KeyVehicles Only)

Program a new key to the vehiclewhen a recognized key is notavailable. Canadian regulationsrequire that owners see their dealer.

If there are no currently recognizedkeys available, follow this procedureto program the first key.

This procedure will takeapproximately 30 minutes tocomplete for the first key. Thevehicle must be off and all of thekeys you wish to program must bewith you.

1. Insert the new vehicle key intothe ignition.

2. Turn to ON/RUN. The securitylight will come on.

3. Wait 10 minutes until thesecurity light turns off.

4. Turn the ignition to LOCK/OFF.

5. Repeat Steps 2–4 two moretimes. After the third time, turn toON/RUN; the key is learned andall previously known keys will nolonger work with the vehicle.

Remaining keys can be learned byfollowing the procedure in“Programming with a RecognizedTransmitter (Key Vehicles Only).”

Programming with a RecognizedTransmitter (Keyless AccessVehicles Only)

A new transmitter can beprogrammed to the vehicle whenthere is one recognized transmitter.To program, the vehicle must be offand all of the transmitters, bothcurrently recognized and new, mustbe with you.



1. Place the recognizedtransmitter(s) in the cupholder.The cupholder liner will need tobe pulled out to access thetransmitter pocket.

2. Insert the vehicle key of the newtransmitter into the key lockcylinder located on the outsideof the driver door and turn thekey counterclockwise to theunlock position five times within10 seconds.

The Driver Information Center(DIC) displays READY FORREMOTE #2, 3, 4 or 5.

3. Place the new transmitter intothe transmitter pocket with thebuttons facing up. Thetransmitter pocket is locatedinside the center consolecupholder.

4. Press the ENGINE START/STOP button. When thetransmitter is learned, the DICwill show that it is ready toprogram the next transmitter.

5. Remove the transmitter from thetransmitter pocket and press K.

To program additionaltransmitters, repeat Steps 3–5.

When all additional transmittersare programmed, press and holdthe ignition for 12 seconds toexit programming mode.

Reinstall the rubber cupliner.

Programming without aRecognized Transmitter (KeylessAccess Vehicles Only)

If there are no currently recognizedtransmitters available, follow thisprocedure to program up to eighttransmitters. This feature is notavailable in Canada. This procedurewill take approximately 30 minutesto complete. The vehicle must be offand all of the transmitters you wishto program must be with you.

1. Insert the vehicle key of thetransmitter into the key lockcylinder located on the outsideof the driver door and turn thekey to the unlock position,counterclockwise, five timeswithin 10 seconds.

The Driver Information Center(DIC) displays REMOTE LEARNPENDING, PLEASE WAIT.



2. Wait for 10 minutes until the DICdisplays PRESS ENGINESTART BUTTON TO LEARNand then press the ENGINESTART/STOP button.

The DIC display will again showREMOTE LEARN PENDING,PLEASE WAIT.

3. Repeat Step 2 two additionaltimes. After the third time allpreviously known transmitterswill no longer work with thevehicle. Remaining transmitterscan be relearned during the nextsteps.

The DIC display should nowshow READY FOR REMOTE# 1.

4. Place the new transmitter intothe transmitter pocket with thebuttons facing up. Thetransmitter pocket is locatedinside the center consolecupholder. The cupholder linerwill need to be pulled out toaccess the transmitter pocket.

5. Press the ENGINE START/STOP button. When thetransmitter is learned, the DICwill show that it is ready toprogram the next transmitter.

6. Remove the transmitter from thetransmitter pocket and press K.

To program additionaltransmitters, repeat Steps 4–6.

When all additional transmittersare programmed, press and holdthe ENGINE START/STOPbutton for 12 seconds to exitprogramming mode.

Starting the Vehicle with a LowTransmitter Battery

If the transmitter battery is weak or ifthere is interference with the signal ,the DIC may display NO REMOTEDETECTED or NO REMOTE KEYWAS DETECTED PLACE KEY INTRANSMITTER POCKET THENSTART YOUR VEHICLE when youtry to start the vehicle. TheREPLACE BATTERY IN REMOTEKEY message may also bedisplayed at this time.

To start the vehicle:

1. Remove the cupholder liner fromthe center console cupholder.



2. Place the transmitter in thetransmitter pocket with thebuttons facing up.

3. With the vehicle in P (Park) orN (Neutral), press the brakepedal and the ENGINE START/STOP button. See Starting theEngine on page 9-18 foradditional information about thevehicle's keyless ignition withpushbutton start.

Replace the transmitter batteryas soon as possible.

Battery Replacement

Replace the battery if the REPLACEBATTERY IN REMOTE KEYmessage displays in the DIC. SeeKey and Lock Messages onpage 5-43.

{ Caution

When replacing the battery, donot touch any of the circuitry onthe transmitter. Static from yourbody could damage thetransmitter.

The battery is not rechargeable. Toreplace the battery:

1. Push the button on thetransmitter to extend the key.

2. Remove the battery cover byprying it with a finger.

3. Remove the battery by pushingon the battery and sliding ittoward the key blade.

4. Insert the new battery, positiveside facing up. Push the batterydown until it is held in place.Replace with a CR2032 orequivalent battery.

5. Snap the battery cover back onto the transmitter.

Remote Vehicle StartIf equipped, this feature that allowsthe engine to be started fromoutside the vehicle.

/ (Remote Vehicle Start): Thisbutton will be on the RKEtransmitter if the vehicle has remotestart.

The climate control system will usethe previous settings during aremote start. The rear defog maycome on during remote start basedon cold ambient conditions. Therear fog indicator light does notcome on during remote start. If thevehicle has heated seats, they maycome on during a remote start. SeeHeated Front Seats on page 3-8.



Laws in some local communitiesmay restrict the use of remotestarters. For example, some lawsrequire a person using remote startto have the vehicle in view. Checklocal regulations for anyrequirements.

Other conditions can affect theperformance of the transmitter. SeeRemote Keyless Entry (RKE)System on page 2-2.

Starting the Vehicle

To start the engine using the remotestart feature:

1. Press and release Q.

2. Immediately press and hold /for at least four seconds or untilthe turn signal lamps flash. Theturn signal lamps flashingconfirms the request to remotestart the vehicle has beenreceived.

When the engine starts, the parkinglamps will turn on and remain on aslong as the engine is running. Thedoors will be locked and the climatecontrol system may come on.

The engine will continue to run for10 minutes. Repeat the steps for a10-minute time extension. Remotestart can be extended only once.

Start the vehicle before driving.

Extending Engine Run Time

The engine run time can also beextended by another 10-minutes,if during the first 10 minutesSteps 1–3 are repeated while theengine is still running. This providesa total of 20 minutes.

The remote start can only beextended once.

When the remote start is extended,the second 10-minute period isadded on to the first 10 minutes andthe engine will run for a total of20 minutes.

A maximum of two remote starts,or a remote start with an extension,are allowed between ignition cycles.

The vehicle's ignition must bechanged to ON/RUN/START andthen back to OFF before the remotestart procedure can be used again.

Canceling a Remote Start

To cancel a remote start, do one ofthe following:. Aim the RKE transmitter at the

vehicle and press and hold/until the parking lamps turn off.

. Turn on the hazard warningflashers.

. Turn the vehicle on and then off.

Conditions in Which Remote StartWill Not Work

The remote vehicle start feature willnot operate if:. The key is in the ignition (Key

Access) or if the key is in thevehicle (Keyless Access).

. The hood is not closed.



. The hazard warning flashersare on.

. The malfunction indicator lampis on.

. The engine coolant temperatureis too high.

. The oil pressure is low.

. Two remote vehicle starts, or asingle remote start with anextension, have alreadybeen used.

. The vehicle is not in P (Park).

Door Locks

{ Warning

Unlocked doors can bedangerous.

. Passengers, especiallychildren, can easily open thedoors and fall out of a movingvehicle. The chance of beingthrown out of the vehicle in a

(Continued)

Warning (Continued)

crash is increased if thedoors are not locked. So, allpassengers should wearsafety belts properly and thedoors should be lockedwhenever the vehicle isdriven.

. Young children who get intounlocked vehicles may beunable to get out. A child canbe overcome by extreme heatand can suffer permanentinjuries or even death fromheat stroke. Always lock thevehicle whenever leaving it.

. Outsiders can easily enterthrough an unlocked doorwhen slowing or stopping thevehicle. Lock the doors tohelp prevent this fromhappening.

To lock or unlock the door fromoutside the vehicle, press Q or Kon the Remote Keyless Entry (RKE)transmitter or use the key in thedriver door.

From inside the vehicle with thedoors locked, pull once on the doorhandle to unlock it, and a secondtime to open it.

Push down on the door lock knobon the top of the door.

Manually locking the driver dooralso automatically locks all otherdoors.

See Remote Keyless Entry (RKE)System Operation on page 2-3 andPower Door Locks on page 2-12.



Power Door Locks

K : Press to unlock the doors.

Q : Press to lock the doors.

See Vehicle Personalization onpage 5-48 for more information.

Delayed LockingThis feature delays the locking ofthe doors until five seconds after alldoors are closed.

When Q is pressed on the powerdoor lock switch while the door isopen, a chime will sound threetimes indicating delayed locking isactive.

The doors will lock automaticallyfive seconds after all doors areclosed. If a door is reopened beforethat time, the five-second timer willreset when all doors are closedagain.

Press Q on the door lock switch

again or press Q on the RKEtransmitter to lock doorsimmediately.

This feature can also beprogrammed. See VehiclePersonalization on page 5-48.

Automatic Door Locks

Automatic Door Lock

The doors can be programmed toautomatically lock when the shiftlever is moved out of P (Park). See“Power Door Locks” in VehiclePersonalization on page 5-48.

Automatic Door Unlock

If Automatic Door Locking is turnedon, then all doors will automaticallyunlock when the shift lever is movedinto P (Park).

Lockout ProtectionIf equipped with pushbutton startand the vehicle is in ACC/ACCESSORY or ON/RUN/START,and locking is requested with thedriver door open, all doors will lockand only the driver door will unlock.

If equipped with a keyed ignition,and the key is in the ignition whenlocking is requested with the driverdoor open, all doors will lock andthen the driver door will unlock.



Lockout Protection with the key inthe ignition can be manuallyoverridden with the driver door openby pressing and holding Q on thepower door lock switch.

If Unlocked Door Anti Lockout isturned on and the vehicle is off, andlocking is requested with the driverdoor open, all doors will lock andonly the driver door will unlock. TheUnlocked Door Anti Lockout featurecan be turned on or off using thevehicle personalization menus. SeeVehicle Personalization onpage 5-48.

Safety LocksThe vehicle has power safety locks.Power safety locks will lock the rearwindows and not allow the reardoors to be opened from the inside.

Power Safety Locks

PressZ to activate the safetylocks on the rear doors. Theindicator light will illuminate.

This switch also disables the powerwindow controls on the rear doors.

PressZ again to deactivate thesafety locks on the rear doors.

If a rear door handle is being pulledat the same time the safety lock isdeactivated, that door will remainlocked and the indicator light mayflash. Release the handle, then

press the safety lock twice todeactivate the safety locks. See“Rear Window Lockout” underPower Windows on page 2-21.



Doors

Trunk

{ Warning

Exhaust gases can enter thevehicle if it is driven with theliftgate, trunk/hatch open, or withany objects that pass through theseal between the body and thetrunk/hatch or liftgate. Engineexhaust contains carbonmonoxide (CO) which cannot beseen or smelled. It can causeunconsciousness and even death.

If the vehicle must be driven withthe liftgate, or trunk/hatch open:

. Close all of the windows.

. Fully open the air outlets onor under the instrumentpanel.

(Continued)

Warning (Continued)

. Adjust the climate controlsystem to a setting thatbrings in only outside air andset the fan speed to thehighest setting. See “ClimateControl Systems” in theIndex.

. If the vehicle has a powerliftgate, disable the powerliftgate function.

For more information aboutcarbon monoxide, see EngineExhaust on page 9-26.

Trunk Release

To open the trunk:

Press| on the driver door.

PressV orY on the RemoteKeyless Entry (RKE) transmitter.



Press the touch pad under thevehicle emblem after unlocking alldoors.

To close the trunk, use the pull cupas an aid.

Emergency Trunk ReleaseHandle

{ Caution

Do not use the emergency trunkrelease handle as a tie-down oranchor point when securing itemsin the trunk as it could damagethe handle.

There is a glow-in-the-darkemergency trunk release handle onthe trunk lid. This handle will glow

following exposure to light. Pull therelease handle to open the trunkfrom the inside.



Vehicle SecurityThis vehicle has theft-deterrentfeatures; however, they do not makethe vehicle impossible to steal.

Vehicle Alarm SystemThis vehicle has a anti-theft alarmsystem.

The indicator light, on theinstrument panel near thewindshield, indicates the status ofthe system:

Off: Alarm system is disarmed.

On Solid: Vehicle is securedduring the delay to arm the system.

Fast Flash: Vehicle is unsecured.A door, the hood, or the trunkis open.

Slow Flash: Alarm system isarmed.

Arming the Alarm System

1. Close the trunk and the hood.Turn off the vehicle.

2. Lock the vehicle in one ofthree ways:. Use the RKE transmitter.. Use the Keyless Access

system, if equipped.

. With a door open, press Qon the interior of the door.

3. After 30 seconds the alarmsystem will arm, and theindicator light will begin to slowlyflash indicating the alarm systemis operating. Pressing Q on theRKE transmitter a second timewill bypass the 30-second delayand immediately arm the alarmsystem.

The vehicle alarm system will notarm if the doors are locked withthe key.

If the driver door is opened withoutfirst unlocking with the RKEtransmitter, the horn will chirp andthe lights will flash to indicatepre-alarm. If the vehicle is notstarted, or the door is not unlockedby pressing K on the RKEtransmitter during the 10-secondpre-alarm, the alarm will beactivated.

If a door, the hood, or the trunk isopened without first disarming thesystem, the turn signals will flashand the horn will sound for about30 seconds. The alarm system willthen re-arm to monitor for the nextunauthorized event.

Disarming the Alarm System

Do one of the following to disarmthe alarm system or turn off thealarm if it has been activated:

. Press K on the RKE transmitter.



. Unlock the vehicle using theKeyless Access system,if equipped.

. Start the vehicle.

To avoid setting off the alarm byaccident:. Lock the vehicle after all

occupants have left the vehicleand all doors are closed.

. Always unlock a door with theRKE transmitter or use theKeyless Access system,if equipped.

Unlocking the driver door with thekey will not disarm the system orturn off the alarm.

How to Detect a TamperCondition

If K is pressed on the RKEtransmitter and the horn chirps threetimes, an alarm occurred previouslywhile the alarm system was armed.

If the alarm has been activated, amessage will appear on the DIC.See Security Messages onpage 5-46.

ImmobilizerSee Radio Frequency Statement onpage 13-15.

Immobilizer Operation(Key Access)This vehicle has a passivetheft-deterrent system.

The system does not have to bemanually armed or disarmed.

The vehicle is automaticallyimmobilized when the key isremoved from the ignition.

The system is automaticallydisarmed when the vehicle isstarted with the correct key. The keyuses a transponder that matches animmobilizer control unit in thevehicle and automatically disarms

the system. Only the correct keystarts the vehicle. The vehicle maynot start if the key is damaged.

The security light in the instrumentcluster comes on if there is aproblem with arming or disarmingthe theft-deterrent system.

When trying to start the vehicle, thesecurity light comes on briefly whenthe ignition is turned on.

If the engine does not start and thesecurity light stays on, there is aproblem with the system. Turn theignition off and try again.

If the engine still does not start, andthe key appears to be undamagedor the light continues to stay on, tryanother ignition key.



If the engine still does not start withthe other key, the vehicle needsservice. If the vehicle does start, thefirst key may be damaged. See yourdealer who can service thetheft-deterrent system and have anew key made.

Do not leave the key or device thatdisarms or deactivates thetheft-deterrent system in the vehicle.

Immobilizer Operation(Keyless Access)This vehicle has a passivetheft-deterrent system.

The system does not have to bemanually armed or disarmed.

The vehicle is automaticallyimmobilized when the transmitterleaves the vehicle.

The immobilization system isdisarmed when the ignition button ispushed in and a valid transmitter isfound in the vehicle.

The security light on the instrumentcluster comes on when there is aproblem with arming or disarmingthe theft-deterrent system.

The system has one or moretransmitters matched to animmobilizer control unit in thevehicle. Only a correctly matchedtransmitter will start the vehicle.If the transmitter is ever damaged,you may not be able to start yourvehicle.

When trying to start the vehicle, thesecurity light comes on briefly whenthe ignition is turned on.

If the vehicle does not start and thesecurity light stays on, there is aproblem with the system. Turn thevehicle off and try again.

If the RKE transmitter appears to beundamaged, try another transmitter,or place the transmitter in thetransmitter pocket. See “Starting theVehicle with a Low TransmitterBattery” under Remote KeylessEntry (RKE) System Operation onpage 2-3.

If the vehicle does not start with theother transmitter or when thetransmitter is in the transmitterpocket, your vehicle needs service.See your dealer who can servicethe theft-deterrent system and havea new transmitter programmed tothe vehicle.

Do not leave the transmitter ordevice that disarms or deactivatesthe theft-deterrent system in thevehicle.



Exterior Mirrors

Convex Mirrors

{ Warning

A convex mirror can make things,like other vehicles, look fartheraway than they really are. If youcut too sharply into the right lane,you could hit a vehicle on theright. Check the inside mirror orglance over your shoulder beforechanging lanes.

The passenger side mirror is convexshaped. A convex mirror's surface iscurved so more can be seen fromthe driver seat.

Reverse Tilt Mirrors

If equipped with memory features,the passenger and/or driver mirrortilts to a preselected position whenthe vehicle is in R (Reverse). Thisallows the driver to view the curbwhen parallel parking. The mirror(s)

return to the original position whenthe vehicle is shifted out of R(Reverse), the ignition is turned off,or the vehicle is driven in R(Reverse) above a predeterminedspeed.Turn this feature on or offthrough vehicle personalization. SeeVehicle Personalization onpage 5-48

Power Mirrors

Controls for the outside powermirrors are located on thedriver door.

To adjust a mirror:

1. Move the selector switch to L(Left) or R (Right) to choosedriver or passenger mirror.

2. Press the arrows on the controlpad to move each mirror in thedesired direction.

3. Return the selector switch to thecenter position.

Memory Mirrors

If equipped, the vehicle may havememory mirrors. See Memory Seatson page 3-6.

Folding Mirrors

Manual Folding Mirrors

The mirrors can be folded inwardtoward the vehicle to preventdamage when going through anautomatic car wash. Push the mirroroutward to return it to the originalposition.



Heated MirrorsThe vehicle has heated mirrors:

1 (Rear Window Defogger):Press to heat the mirrors.

See “Rear Window Defogger” underDual Automatic Climate ControlSystem on page 8-1.

Reverse Tilt MirrorsIf equipped with memory seats, thepassenger and/or driver mirror tiltsto a preselected position when thevehicle is in R (Reverse). Thisfeature allows the driver to view thecurb when parallel parking. Themirror(s) return to the originalposition when the vehicle is shiftedout of R (Reverse), the ignition isturned off, or the vehicle is driven inR (Reverse) above a predeterminedspeed.

Turn this feature on or off throughvehicle personalization. See VehiclePersonalization on page 5-48.

Interior Mirrors

Interior Rearview MirrorsAdjust the rearview mirror for a clearview of the area behind yourvehicle.

If equipped with OnStar, the vehiclemay have three control buttons atthe bottom of the mirror. See yourdealer for more information aboutOnStar and how to subscribe to it.See OnStar Overview on page 14-1.

Do not spray glass cleaner directlyon the mirror. Use a soft toweldampened with water.

Automatic DimmingRearview MirrorIf equipped, automatic dimmingreduces the glare of the headlampsfrom behind. This feature comes onwhen the vehicle is started.

Windows

{ Warning

Never leave a child, a helplessadult, or a pet alone in a vehicle,especially with the windowsclosed in warm or hot weather.They can be overcome by theextreme heat and sufferpermanent injuries or even deathfrom heat stroke.



The vehicle aerodynamics aredesigned to improve fuel economyperformance. This may result in apulsing sound when either rearwindow is down and the frontwindows are up. To reduce thesound, open either a front windowor the sunroof, if equipped.

Power Windows

{ Warning

Children could be seriouslyinjured or killed if caught in thepath of a closing window. Neverleave keys in a vehicle withchildren. When there are childrenin the rear seat, use the windowlockout button to preventoperation of the windows. SeeKeys on page 2-1.

The power window switches on thedriver door control all four windows.The passenger doors have awindow switch for that window.Press the switch down to open thewindow. Pull the front of the switchup to close it.

The switches work when the ignitionis in ON/RUN or ACC/ACCESSORY, or in RetainedAccessory Power (RAP). SeeRetained Accessory Power (RAP)on page 9-24.

Express Window Operation

Windows with an express-up ordown feature allow the frontwindows to be lowered or raisedwithout holding the switch. Rearwindows only have express down.Pull a window switch up or push itdown all the way, release it, and thewindow goes up or downautomatically. Stop the window bypushing or pulling the switch.

Rear Window Lockout



This feature prevents the rearpassenger windows from operating,except from the driver position.

PressZ { to activate the rearwindow lockout switch. An indicatorlight comes on when activated.

This switch also disables the doorlocks on the rear doors. See SafetyLocks on page 2-13.

PressZ { again to deactivate thelockout switch.

If the indicator light flashes, thefeature may not be working properly.

Programming the PowerWindows

If the battery on the vehicle hasbeen recharged, disconnected, or isnot working, you will need toreprogram each front power windowfor the express-up feature to work.Before reprogramming, replace orrecharge the vehicle's battery.

To program each front window:

1. The ignition is in ACC/ACCESSORY or ON/RUN,or Retained AccessoryPower (RAP).

2. Press and hold the powerwindow switch until the windowis fully open.

3. Pull the power window switch upuntil the window is fully closed.

4. Continue holding the switch upfor approximately two secondsafter the window is completelyclosed.

The window is now reprogrammed.Repeat the process for the otherwindows.

Sun Visors

Pull the sun visor down to blockglare. If equipped, detach the sunvisor from the center mount to pivotto the side window or to extendalong the rod.



Roof

Sunroof

For vehicles with a sunroof, thesunroof only operates when theignition is in ON/RUN or ACC/ACCESSORY or in RetainedAccessory Power (RAP). SeeRetained Accessory Power (RAP)on page 9-24.

To open or close the sunroof, pressthe switch (1) to the first detentposition.

To express open or close thesunroof with the safety functionenabled, press the open or closesunroof switch (1) to the seconddetent position and release. To stopthe movement, press the switchagain.

To automatically tilt or close thesunroof, press the tilt open or closesunroof switch (2).

If an object is in the path of thesunroof while it is closing, theanti-pinch feature will detect theobject and stop the sunroof. Thesunroof will then return to thefull-open or vent position.

The sunroof glass panel cannot beopened or closed if the vehicle hasan electrical failure.

Initializing

After a power failure, the sunroofoperation may be limited. Have thesystem initialized by a dealertechnician.

Dirt and debris may collect on thesunroof seal or in the track. Thiscould cause an issue with sunroofoperation or noise. It could also plugthe water drainage system.Periodically open the sunroof andremove any obstacles or loosedebris. Wipe the sunroof seal androof sealing area using a cleancloth, mild soap, and water. Do notremove grease from the sunroof.

Sunshade

The sunshade is manually operated.Close or open the sunshade bysliding. When the sunroof isopened, the sunshade isalways open.



Safety Function

If the sunroof has any resistanceduring automatic closing, it willimmediately stop and reverse.

To override the safety function,press and hold the close sunroofswitch. The sunroof closes withoutthe safety function. To stop themovement, release the switch.


Seats and Restraints 3-1

Seats andRestraints

Head RestraintsHead Restraints . . . . . . . . . . . . . . . 3-2

Front SeatsSeat Adjustment . . . . . . . . . . . . . . 3-3Power Seat Adjustment . . . . . . . 3-4Lumbar Adjustment . . . . . . . . . . . 3-4Reclining Seatbacks . . . . . . . . . . 3-5Memory Seats . . . . . . . . . . . . . . . . 3-6Heated Front Seats . . . . . . . . . . . 3-8

Rear SeatsRear Seats . . . . . . . . . . . . . . . . . . . . 3-9

Safety BeltsSafety Belts . . . . . . . . . . . . . . . . . . 3-10How to Wear Safety BeltsProperly . . . . . . . . . . . . . . . . . . . . 3-12

Lap-Shoulder Belt . . . . . . . . . . . 3-12

Safety Belt Use DuringPregnancy . . . . . . . . . . . . . . . . . . 3-17

Safety Belt Extender . . . . . . . . . 3-17Safety System Check . . . . . . . . 3-18Safety Belt Care . . . . . . . . . . . . . 3-18Replacing Safety Belt SystemParts after a Crash . . . . . . . . . 3-18

Airbag SystemAirbag System . . . . . . . . . . . . . . . 3-19Where Are the Airbags? . . . . . 3-20When Should an AirbagInflate? . . . . . . . . . . . . . . . . . . . . . 3-22

What Makes an AirbagInflate? . . . . . . . . . . . . . . . . . . . . . 3-22

How Does an AirbagRestrain? . . . . . . . . . . . . . . . . . . . 3-23

What Will You See after anAirbag Inflates? . . . . . . . . . . . . 3-23

Passenger SensingSystem . . . . . . . . . . . . . . . . . . . . . 3-24

Servicing the Airbag-EquippedVehicle . . . . . . . . . . . . . . . . . . . . . 3-29

Adding Equipment to theAirbag-Equipped Vehicle . . . 3-29

Airbag System Check . . . . . . . . 3-30Replacing Airbag SystemParts after a Crash . . . . . . . . . 3-30

Child RestraintsOlder Children . . . . . . . . . . . . . . . 3-31Infants and YoungChildren . . . . . . . . . . . . . . . . . . . . 3-33

Child Restraint Systems . . . . . 3-35Where to Put the Restraint . . . 3-37Lower Anchors and Tethersfor Children (LATCHSystem) . . . . . . . . . . . . . . . . . . . . 3-38

Replacing LATCH SystemParts After a Crash . . . . . . . . . 3-46

Securing Child Restraints(Rear Seat) . . . . . . . . . . . . . . . . . 3-46

Securing Child Restraints(Front Passenger Seat) . . . . 3-48


3-2 Seats and Restraints

Head RestraintsThe vehicle's front and rear seatshave adjustable head restraints inthe outboard seating positions.

{ Warning

With head restraints that are notinstalled and adjusted properly,there is a greater chance thatoccupants will suffer a neck/spinal injury in a crash. Do notdrive until the head restraints forall occupants are installed andadjusted properly.

Adjust the head restraint so that thetop of the restraint is at the sameheight as the top of the occupant'shead. This position reduces thechance of a neck injury in a crash.

Front Seat

To raise or lower the head restraint,press the release button located onthe side of the head restraint andpull up or push the head restraintdown and release the button.

Pull and push on the head restraintafter the button is released to makesure that it is locked in place.

The front head restraints are notdesigned to be removed.



Rear Seat

Pull the head restraint up to raise it.To lower the head restraint, pressthe release button, located on thehead restraint post on the top of theseatback, while you push the headrestraint down.

Push down on the head restraintafter the button is released to makesure that it is locked in place.

If you are installing a child restraintin the rear seat, see “Securing aChild Restraint Designed for theLATCH System” under LowerAnchors and Tethers for Children(LATCH System) on page 3-38.

Front Seats

Seat AdjustmentSeat Position

{ Warning

You can lose control of thevehicle if you try to adjust a driverseat while the vehicle is moving.Adjust the driver seat only whenthe vehicle is not moving.



To adjust the seat position:

1. Pull the handle under the front ofthe seat cushion.

2. Slide the seat to the desiredposition and release the handle.

3. Try to move the seat back andforth to be sure it is locked inplace.

Height Adjustment

Press and hold the top or bottom ofthe switch to raise or lower the seat.Release the switch when thedesired height is reached.

Power Seat Adjustment

To adjust a power seat:. Move the seat forward or

rearward by sliding the controlforward or rearward.

. Raise or lower the front or rearpart of the seat cushion bymoving the front or rear of thecontrol up or down.

. Raise or lower the entire seat bymoving the entire control upor down.

Lumbar Adjustment

To adjust the lumbar support:. Press and hold the front or rear

of the control to increase ordecrease lumbar support.

. Press and hold the top or bottomof the control to raise or lowerlumbar support.

Release the control when thedesired level of support is reached.



Reclining Seatbacks

{ Warning

Sitting in a reclined position whenthe vehicle is in motion can bedangerous. Even when buckledup, the safety belts cannot dotheir job.

The shoulder belt will not beagainst your body. Instead, it willbe in front of you. In a crash, youcould go into it, receiving neck orother injuries.

The lap belt could go up overyour abdomen. The belt forceswould be there, not at your pelvicbones. This could cause seriousinternal injuries.

For proper protection when thevehicle is in motion, have theseatback upright. Then sit wellback in the seat and wear thesafety belt properly.

Do not have a seatback reclined ifthe vehicle is moving.

Manual Reclining Seatbacks

{ Warning

If either seatback is not locked, itcould move forward in a suddenstop or crash. That could causeinjury to the person sitting there.Always push and pull on theseatbacks to be sure they arelocked.

To recline the seatback:

1. Lift the lever.

2. Move the seatback to thedesired position, and thenrelease the lever to lock theseatback in place.

3. Push and pull on the seatback tomake sure it is locked.

To return the seatback to the uprightposition:

1. Lift the lever fully withoutapplying pressure to theseatback, and the seatback willreturn to the upright position.



2. Push and pull on the seatback tomake sure it is locked.

Power Reclining Seatbacks

To adjust a power seatback,if equipped:. Tilt the top of the control

rearward to recline.. Tilt the top of the control forward

to raise.

Memory Seats

If equipped, the MEM, “1,” and “2”buttons on the outboard side of thedriver seat are used to manuallysave and recall the driver seat andoutside mirror positions. Thesemanually stored positions arereferred to as Button Memorypositions.

The vehicle will also automaticallysave driver seat and outside mirrorpositions to the current driverRemote Keyless Entry (RKE)transmitter when the ignition is

turned off. These automaticallystored positions are referred to asRKE Memory positions. SeeRemote Keyless Entry (RKE)System Operation on page 2-3.

Storing Button Memory Positions

To save positions into ButtonMemory:

1. Adjust the driver seat and bothoutside mirrors to the desireddriving positions.

2. Press and hold MEM (Memory)and “1” at the same time until abeep sounds.

3. Repeat Steps 1 and 2 for asecond driver using “2.”

Recalling Button MemoryPositions

To recall the manually saved ButtonMemory positions, press and hold“1” or “2.” The driver seat andoutside mirrors move to thepositions stored to those buttons



when pressed. Releasing “1” or “2”before the stored positions arereached stops the recall.

If something has blocked the driverseat while recalling a memoryposition, the recall may stop.Remove the obstruction; then pressand hold the appropriate manualcontrol for the memory item that isnot recalling for two seconds. Tryrecalling the memory position againby pressing the appropriate memorybutton. If the memory position is stillnot recalling, see your dealer forservice.

Recalling RKE Memory Positions(Memory Remote Recall)

The Memory Remote Recall featurecan recall the driver seat and theoutside mirrors to previously storedRKE Memory positions whenentering the vehicle.

Every time the ignition is placed inOFF, the positions of the driver seatand outside mirrors areautomatically stored to the RKEtransmitter that was used to start

the vehicle. These positions arecalled RKE Memory positions andmay be different than the previouslymentioned Button Memory positionssaved to the “1” or “2” buttons. Toautomatically recall RKE Memorypositions, unlock the driver doorwith the RKE transmitter and openthe door. On vehicles with KeylessAccess, opening the driver doorwhen an RKE transmitter is presentwill activate the RKE Memory recall.If the driver door is already open,pressing the K button on the RKEtransmitter will also activate theRKE Memory recall. The driver seatand outside mirrors will move to thepreviously saved RKE Memorypositions.

This feature is turned on or off usingthe vehicle personalization menu.See Vehicle Personalization onpage 5-48.

To stop recall movement, press oneof the memory, power mirror,or power seat controls.

If something has blocked the driverseat while recalling a memoryposition, the recall may stop.Remove the obstruction; then pressand hold the appropriate manualcontrol for the memory item that isnot recalling for two seconds. Tryrecalling the memory position againby opening the driver door andpressing the RKE transmitter Kbutton. If the memory position is stillnot recalling, see your dealer forservice.

Easy Exit Driver Seat

This feature moves the seatrearward allowing the driver moreroom to exit the vehicle.

To activate, place the ignition inOFF and open the driver door. If thedriver door is already open, placingthe ignition in OFF will activate therecall.

This feature is turned on or off usingthe vehicle personalization menu.See Vehicle Personalization onpage 5-48.



To stop recall movement, press oneof the memory or power seatcontrols.

If something has blocked the driverseat while recalling the exit position,the recall may stop. Remove theobstruction; then press and hold thepower seat control rearward fortwo seconds. Try recalling the exitposition again. If the exit position isstill not recalling, see your dealer forservice.

Heated Front Seats

{ Warning

If you cannot feel temperaturechange or pain to the skin, theseat heater may cause burns. Toreduce the risk of burns, peoplewith such a condition should usecare when using the seat heater,especially for long periods oftime. Do not place anything onthe seat that insulates against

(Continued)

Warning (Continued)

heat, such as a blanket, cushion,cover, or similar item. This maycause the seat heater tooverheat. An overheated seatheater may cause a burn or maydamage the seat.

If equipped, the buttons are part ofthe climate control system on thecenter stack. To operate, the ignitionand the climate control system must

be on. If the climate control systemis off, press the O button to turnit on.

Press M or L to heat the driver orpassenger seat.

Press the button once for thehighest setting. With each press ofthe button, the seat will change tothe next lower setting, and then tothe off setting. The lights near theheated seat symbol on the displayindicate three for the highest settingand one for the lowest.

The passenger seat may takelonger to heat up.

Remote Start Heated Seats

If equipped, when it is cold outside,the heated seats can be turned onautomatically during a remote start.The heated seats are canceledwhen the ignition is turned on. Pressthe button to use the heated seatsafter the vehicle is started.



The heated seat indicator lights onthe button do not turn on during aremote start.

The heated seat temperatureperformance of an unoccupied seatmay be reduced. This is normal.

The heated seats will not turn onduring a remote start unless theyare enabled in the vehiclepersonalization menu. See RemoteVehicle Start on page 2-9 andVehicle Personalization onpage 5-48.

Rear SeatsFolding the Seatback

Either side of the seatback can befolded down for more cargo space.Fold a seatback only when thevehicle is not moving.

{ Caution

Folding a rear seat with the safetybelts still fastened may causedamage to the seat or the safetybelts. Always unbuckle the safetybelts and return them to theirnormal stowed position beforefolding a rear seat.

To fold the seatback down:

1. Pull on the lever on the top ofthe seatback to unlock it.

A tab near the seatback leverraises when the seatback isunlocked.

2. Fold the seatback down.

Repeat the steps to fold theother seatback, if desired.



Raising the Seatback

{ Warning

If either seatback is not locked, itcould move forward in a suddenstop or crash. That could causeinjury to the person sitting there.Always push and pull on theseatbacks to be sure they arelocked.

{ Warning

A safety belt that is improperlyrouted, not properly attached,or twisted will not provide theprotection needed in a crash. Theperson wearing the belt could beseriously injured. After raising therear seatback, always check to besure that the safety belts areproperly routed and attached, andare not twisted.

To raise a seatback:

1. Lift the seatback up and push itrearward to lock it in place.Make sure the safety belt is nottwisted or caught in theseatback.

A tab near the seatback leverretracts when the seatback islocked in place.

2. Push and pull the top of theseatback to be sure it is lockedinto position.

3. Repeat the steps to raise theother seatback, if necessary.

When the seat is not in use, itshould be kept in the upright, lockedposition.

Safety BeltsThis section of the manualdescribes how to use safety beltsproperly. It also describes somethings not to do with safety belts.

{ Warning

Do not let anyone ride where asafety belt cannot be wornproperly. In a crash, if you or yourpassenger(s) are not wearingsafety belts, injuries can be muchworse than if you are wearingsafety belts. You can be seriouslyinjured or killed by hitting thingsinside the vehicle harder or bybeing ejected from the vehicle. Inaddition, anyone who is notbuckled up can strike otherpassengers in the vehicle.

It is extremely dangerous to ridein a cargo area, inside or outsideof a vehicle. In a collision,passengers riding in these areas

(Continued)



Warning (Continued)

are more likely to be seriouslyinjured or killed. Do not allowpassengers to ride in any area ofthe vehicle that is not equippedwith seats and safety belts.

Always wear a safety belt, andcheck that all passenger(s) arerestrained properly too.

This vehicle has indicators as areminder to buckle the safety belts.See Safety Belt Reminders onpage 5-19.

Why Safety Belts Work

When riding in a vehicle, you travelas fast as the vehicle does. If thevehicle stops suddenly, you keepgoing until something stops you.It could be the windshield, theinstrument panel, or the safety belts!

When you wear a safety belt, youand the vehicle slow down together.There is more time to stop becauseyou stop over a longer distance and,when worn properly, your strongestbones take the forces from the

safety belts. That is why wearingsafety belts makes such goodsense.

Questions and Answers AboutSafety Belts

Q: Will I be trapped in the vehicleafter a crash if I am wearing asafety belt?

A: You could be— whether you arewearing a safety belt or not.Your chance of being consciousduring and after a crash, so youcan unbuckle and get out, ismuch greater if you are belted.

Q: If my vehicle has airbags, whyshould I have to wear safetybelts?

A: Airbags are supplementalsystems only; so they work withsafety belts— not instead ofthem. Whether or not an airbagis provided, all occupants stillhave to buckle up to get themost protection.



Also, in nearly all states and inall Canadian provinces, the lawrequires wearing safety belts.

How to Wear Safety BeltsProperlyThis section is only for people ofadult size.

There are special things to knowabout safety belts and children. Andthere are different rules for smallerchildren and infants. If a child will beriding in the vehicle, see OlderChildren on page 3-31 or Infantsand Young Children on page 3-33.Follow those rules for everyone'sprotection.

It is very important for all occupantsto buckle up. Statistics show thatunbelted people are hurt more oftenin crashes than those who arewearing safety belts.

There are important things to knowabout wearing a safety belt properly.

. Sit up straight and always keepyour feet on the floor in frontof you.

. Always use the correct bucklefor your seating position.

. Wear the lap part of the belt lowand snug on the hips, justtouching the thighs. In a crash,this applies force to the strongpelvic bones and you would beless likely to slide under the lapbelt. If you slid under it, the beltwould apply force on yourabdomen. This could causeserious or even fatal injuries.

. Wear the shoulder belt over theshoulder and across the chest.These parts of the body are bestable to take belt restrainingforces. The shoulder belt locks ifthere is a sudden stop or crash.

{ Warning

You can be seriously injured,or even killed, by not wearingyour safety belt properly.

. Never allow the lap orshoulder belt to becomeloose or twisted.

. Never wear the shoulder beltunder both arms or behindyour back.

. Never route the lap orshoulder belt over anarmrest.

Lap-Shoulder BeltAll seating positions in the vehiclehave a lap-shoulder belt.



The following instructions explainhow to wear a lap-shoulder beltproperly.

1. Adjust the seat, if the seat isadjustable, so you can sit upstraight. To see how, see “Seats”in the Index.

2. Pick up the latch plate and pullthe belt across you. Do not let itget twisted.

The lap-shoulder belt may lock ifyou pull the belt across you veryquickly. If this happens, let thebelt go back slightly to unlock it.Then pull the belt across youmore slowly.

If the shoulder portion of apassenger belt is pulled out allthe way, the child restraintlocking feature may be engaged.If this happens, let the belt goback all the way and start again.

3. Push the latch plate into thebuckle until it clicks.

Pull up on the latch plate tomake sure it is secure. If the beltis not long enough, see SafetyBelt Extender on page 3-17.

Position the release button onthe buckle so that the safety beltcould be quickly unbuckled ifnecessary.

If equipped with a shoulder beltheight adjuster, move it to theheight that is right for you. See“Shoulder Belt Height Adjuster”



later in this section forinstructions on use andimportant safety information.

4. To make the lap part tight, pullup on the shoulder belt.

To unlatch the belt, push the buttonon the buckle. The belt shouldreturn to its stowed position.

Before a door is closed, be sure thesafety belt is out of the way. If adoor is slammed against a safetybelt, damage can occur to both thesafety belt and the vehicle.

Shoulder Belt Height Adjuster

The vehicle has a shoulder beltheight adjuster for the driver andright front passenger seatingpositions.

Adjust the height so the shoulderportion of the belt is on the shoulderand not falling off of it. The beltshould be close to, but notcontacting, the neck. Impropershoulder belt height adjustmentcould reduce the effectiveness ofthe safety belt in a crash. See Howto Wear Safety Belts Properly onpage 3-12.

Press down on the release buttonand move the height adjuster to thedesired position. After the adjusteris set to the desired position, try to



move it down without pushing therelease button to make sure it haslocked into position.

Safety Belt Pretensioners

This vehicle has safety beltpretensioners for front outboardoccupants. Although the safety beltpretensioners cannot be seen, theyare part of the safety belt assembly.They can help tighten the safetybelts during the early stages of amoderate to severe frontal, nearfrontal, or rear crash if the thresholdconditions for pretensioneractivation are met.

And, if the vehicle has side impactairbags, safety belt pretensionerscan help tighten the safety belts in aside crash or a rollover event.

Pretensioners work only once. If thepretensioners activate in a crash,they will need to be replaced. Otherparts of the vehicle's safety beltsystem may need to be replaced aswell. See Replacing Safety BeltSystem Parts after a Crash onpage 3-18.

Rear Safety Belt ComfortGuides

This vehicle may have rear safetybelt comfort guides. If not, they areavailable through your dealer. Theguides may provide added safetybelt comfort for older children whohave outgrown booster seats andfor some adults. When installed andproperly adjusted, the comfort guidepositions the shoulder belt awayfrom the neck and head.

There is one guide for each outsidepassenger position in the rear seat.To install a comfort guide to thesafety belt:

1. Remove the guide from itsstorage pocket on the side ofthe seat.



2. Place the guide over the belt,and insert the two edges of thebelt into the slots of the guide.

3. Be sure that the belt is nottwisted and it lies flat. Theelastic cord must be under thebelt and the guide on top.

{ Warning

A safety belt that is not properlyworn may not provide theprotection needed in a crash. Theperson wearing the belt could beseriously injured. The shoulderbelt should go over the shoulderand across the chest. These partsof the body are best able to takebelt restraining forces.



4. Buckle, position, and release thesafety belt as describedpreviously in this section. Makesure the shoulder portion of thebelt is on the shoulder and notfalling off of it. The belt shouldbe close to, but not contacting,the neck.

To remove and store the comfortguide, squeeze the belt edgestogether so that the safety belt canbe removed from the guide. Storethe guide in its storage pocket onthe side of the seatback.

Safety Belt Use DuringPregnancySafety belts work for everyone,including pregnant women. Like alloccupants, they are more likely tobe seriously injured if they do notwear safety belts.

A pregnant woman should wear alap-shoulder belt, and the lapportion should be worn as low aspossible, below the rounding,throughout the pregnancy.

The best way to protect the fetus isto protect the mother. When a safetybelt is worn properly, it is more likelythat the fetus will not be hurt in acrash. For pregnant women, as foranyone, the key to making safetybelts effective is wearing themproperly.

Safety Belt ExtenderIf the vehicle's safety belt will fastenaround you, you should use it.

But if a safety belt is not longenough, your dealer will order youan extender. When you go in toorder it, take the heaviest coat youwill wear, so the extender will belong enough for you. To help avoidpersonal injury, do not let someoneelse use it, and use it only for theseat it is made to fit. The extenderhas been designed for adults. Neveruse it for securing child seats. Towear it, attach it to the regular safetybelt. See the instruction sheet thatcomes with the extender.



Safety System CheckNow and then, check that the safetybelt reminder light, safety belts,buckles, latch plates, retractors, andanchorages are all working properly.Look for any other loose ordamaged safety belt system partsthat might keep a safety belt systemfrom doing its job. See your dealerto have it repaired. Torn or frayedsafety belts may not protect you in acrash. They can rip apart underimpact forces. If a belt is torn orfrayed, get a new one right away.

Make sure the safety belt reminderlight is working. See Safety BeltReminders on page 5-19.

Keep safety belts clean and dry.See Safety Belt Care on page 3-18.

Safety Belt CareKeep belts clean and dry.

{ Warning

Do not bleach or dye safety belts.It may severely weaken them. Ina crash, they might not be able toprovide adequate protection.Clean safety belts only with mildsoap and lukewarm water.

Replacing Safety BeltSystem Parts after aCrash

{ Warning

A crash can damage the safetybelt system in the vehicle.A damaged safety belt systemmay not properly protect theperson using it, resulting inserious injury or even death in acrash. To help make sure thesafety belt systems are workingproperly after a crash, have them

(Continued)

Warning (Continued)

inspected and any necessaryreplacements made as soon aspossible.

After a minor crash, replacement ofsafety belts may not be necessary.But the safety belt assemblies thatwere used during any crash mayhave been stressed or damaged.See your dealer to have the safetybelt assemblies inspected orreplaced.

New parts and repairs may benecessary even if the safety beltsystem was not being used at thetime of the crash.

Have the safety belt pretensionerschecked if the vehicle has been in acrash, or if the airbag readiness lightstays on after you start the vehicleor while you are driving. See AirbagReadiness Light on page 5-20.



Airbag SystemThe vehicle has the followingairbags:. A frontal airbag for the driver.. A frontal airbag for the front

outboard passenger.. A seat-mounted side impact

airbag for the driver.. A seat-mounted side impact

airbag for the front outboardpassenger.

. A roof-rail airbag for the driverand the passenger seateddirectly behind the driver.

. A roof-rail airbag for the frontoutboard passenger and thepassenger seated directlybehind the front outboardpassenger.

The vehicle may have the followingairbags:. Seat-mounted side impact

airbags for the second rowoutboard passengers.

All of the airbags have the wordAIRBAG embossed on the trim oron a label near the deploymentopening.

For frontal airbags, the wordAIRBAG is on the center of thesteering wheel for the driver and onthe instrument panel for the frontoutboard passenger.

For seat-mounted side impactairbags, the word AIRBAG is on theside of the seatback closest tothe door.

For roof-rail airbags, the wordAIRBAG is on the ceiling or trim.

Airbags are designed to supplementthe protection provided by safetybelts. Even though today's airbagsare also designed to help reducethe risk of injury from the force of aninflating bag, all airbags must inflatevery quickly to do their job.

Here are the most important thingsto know about the airbag system:

{ Warning

You can be severely injured orkilled in a crash if you are notwearing your safety belt, evenwith airbags. Airbags aredesigned to work with safetybelts, not replace them. Also,airbags are not designed to inflatein every crash. In some crashessafety belts are the only restraint.See When Should an AirbagInflate? on page 3-22.

Wearing your safety belt during acrash helps reduce the chance ofhitting things inside the vehicle orbeing ejected from it. Airbags are“supplemental restraints” to thesafety belts. Everyone in thevehicle should wear a safety beltproperly, whether or not there isan airbag for that person.



{ Warning

Because airbags inflate with greatforce and faster than the blink ofan eye, anyone who is upagainst, or very close to anyairbag when it inflates can beseriously injured or killed. Do notsit unnecessarily close to anyairbag, as you would be if sittingon the edge of the seat or leaningforward. Safety belts help keepyou in position before and duringa crash. Always wear a safetybelt, even with airbags. The drivershould sit as far back as possiblewhile still maintaining control ofthe vehicle.

Occupants should not lean on orsleep against the door or sidewindows in seating positions withseat-mounted side impact airbagsand/or roof-rail airbags.

{ Warning

Children who are up against,or very close to, any airbag whenit inflates can be seriously injuredor killed. Always secure childrenproperly in the vehicle. To readhow, see Older Children onpage 3-31 or Infants and YoungChildren on page 3-33.

There is an airbag readiness lighton the instrument cluster, whichshows the airbag symbol. Thesystem checks the airbag electricalsystem for malfunctions. The lighttells you if there is an electricalproblem. See Airbag ReadinessLight on page 5-20 for moreinformation.

Where Are the Airbags?

The driver frontal airbag is in thecenter of the steering wheel.

The front outboard passengerfrontal airbag is in the passengerside instrument panel.



Driver Side Shown, PassengerSide Similar

The driver and front outboardpassenger seat-mounted sideimpact airbags are in the side of theseatbacks closest to the door.

The roof-rail airbags for the driver,front outboard passenger, andsecond row outboard passengersare in the ceiling above the sidewindows.

Rear Seat Driver Side Shown,Passenger Side Similar

On vehicles with second rowseat-mounted side impact airbags,they are in the sides of the rearseatback closest to the door.

{ Warning

If something is between anoccupant and an airbag, theairbag might not inflate properlyor it might force the object intothat person causing severe injury

(Continued)

Warning (Continued)

or even death. The path of aninflating airbag must be keptclear. Do not put anythingbetween an occupant and anairbag, and do not attach or putanything on the steering wheelhub or on or near any otherairbag covering.

Do not use seat accessories thatblock the inflation path of aseat-mounted side impact airbag.

Never secure anything to the roofof a vehicle with roof-rail airbagsby routing a rope or tie‐downthrough any door or windowopening. If you do, the path of aninflating roof-rail airbag will beblocked.



When Should an AirbagInflate?This vehicle is equipped withairbags. See Airbag System onpage 3-19. Airbags are designed toinflate if the impact exceeds thespecific airbag system's deploymentthreshold. Deployment thresholdsare used to predict how severe acrash is likely to be in time for theairbags to inflate and help restrainthe occupants. The vehicle haselectronic sensors that help theairbag system determine theseverity of the impact. Deploymentthresholds can vary with specificvehicle design.

Frontal airbags are designed toinflate in moderate to severe frontalor near frontal crashes to helpreduce the potential for severeinjuries, mainly to the driver's orfront outboard passenger's headand chest.

Whether the frontal airbags will orshould inflate is not based primarilyon how fast the vehicle is traveling.

It depends on what is hit, thedirection of the impact, and howquickly the vehicle slows down.

Frontal airbags may inflate atdifferent crash speeds depending onwhether the vehicle hits an objectstraight on or at an angle, andwhether the object is fixed ormoving, rigid or deformable, narrowor wide.

Frontal airbags are not intended toinflate during vehicle rollovers, rearimpacts, or in many side impacts.

In addition, the vehicle hasadvanced technology frontalairbags. Advanced technologyfrontal airbags adjust the restraintaccording to crash severity.

Seat-mounted side impact airbagsare designed to inflate in moderateto severe side crashes dependingon the location of the impact.Seat-mounted side impact airbagsare not designed to inflate in frontalimpacts, near frontal impacts,rollovers, or rear impacts.

A seat-mounted side impact airbagis designed to inflate on the side ofthe vehicle that is struck.

Roof-rail airbags are designed toinflate in moderate to severe sidecrashes depending on the locationof the impact. In addition, theseroof-rail airbags are designed toinflate during a rollover or in asevere frontal impact. Roof-railairbags are not designed to inflate inrear impacts. Both roof-rail airbagswill inflate when either side of thevehicle is struck, if the sensingsystem predicts that the vehicle isabout to roll over on its side, or in asevere frontal impact.

In any particular crash, no one cansay whether an airbag should haveinflated simply because of thevehicle damage or repair costs.

What Makes an AirbagInflate?In a deployment event, the sensingsystem sends an electrical signaltriggering a release of gas from the



inflator. Gas from the inflator fills theairbag causing the bag to break outof the cover. The inflator, the airbag,and related hardware are all part ofthe airbag module.

For airbag locations, see Where Arethe Airbags? on page 3-20.

How Does an AirbagRestrain?In moderate to severe frontal ornear frontal collisions, even beltedoccupants can contact the steeringwheel or the instrument panel. Inmoderate to severe side collisions,even belted occupants can contactthe inside of the vehicle.

Airbags supplement the protectionprovided by safety belts bydistributing the force of the impactmore evenly over theoccupant's body.

Rollover capable roof-rail airbagsare designed to help contain thehead and chest of occupants in theoutboard seating positions in the

first and second rows. The rollovercapable roof-rail airbags aredesigned to help reduce the risk offull or partial ejection in rolloverevents, although no system canprevent all such ejections.

But airbags would not help in manytypes of collisions, primarilybecause the occupant's motion isnot toward those airbags. See WhenShould an Airbag Inflate? onpage 3-22.

Airbags should never be regardedas anything more than a supplementto safety belts.

What Will You See afteran Airbag Inflates?After the frontal airbags andseat-mounted side impact airbagsinflate, they quickly deflate, soquickly that some people may noteven realize an airbag inflated.Roof-rail airbags may still be at leastpartially inflated for some time afterthey inflate. Some components ofthe airbag module may be hot for

several minutes. For location of theairbags, see Where Are theAirbags? on page 3-20.

The parts of the airbag that comeinto contact with you may be warm,but not too hot to touch. There maybe some smoke and dust comingfrom the vents in the deflatedairbags. Airbag inflation does notprevent the driver from seeing out ofthe windshield or being able to steerthe vehicle, nor does it preventpeople from leaving the vehicle.

{ Warning

When an airbag inflates, theremay be dust in the air. This dustcould cause breathing problemsfor people with a history ofasthma or other breathing trouble.To avoid this, everyone in thevehicle should get out as soon asit is safe to do so. If you havebreathing problems but cannotget out of the vehicle after an

(Continued)



Warning (Continued)

airbag inflates, then get fresh airby opening a window or a door.If you experience breathingproblems following an airbagdeployment, you should seekmedical attention.

The vehicle has a feature that mayautomatically unlock the doors, turnon the interior lamps, turn on thehazard warning flashers, and shutoff the fuel system after the airbagsinflate. You can lock the doors, turnoff the interior lamps, and turn offthe hazard warning flashers byusing the controls for thosefeatures.

{ Warning

A crash severe enough to inflatethe airbags may have alsodamaged important functions in

(Continued)

Warning (Continued)

the vehicle, such as the fuelsystem, brake and steeringsystems, etc. Even if the vehicleappears to be drivable after amoderate crash, there may beconcealed damage that couldmake it difficult to safely operatethe vehicle.

Use caution if you should attemptto restart the engine after a crashhas occurred.

In many crashes severe enough toinflate the airbag, windshields arebroken by vehicle deformation.Additional windshield breakage mayalso occur from the front outboardpassenger airbag.. Airbags are designed to inflate

only once. After an airbaginflates, you will need some newparts for the airbag system.If you do not get them, theairbag system will not be there

to help protect you in anothercrash. A new system will includeairbag modules and possiblyother parts. The service manualfor the vehicle covers the needto replace other parts.

. The vehicle has a crash sensingand diagnostic module whichrecords information after acrash. See Vehicle DataRecording and Privacy onpage 13-13 and Event DataRecorders on page 13-14.

. Let only qualified technicianswork on the airbag systems.Improper service can mean thatan airbag system will not workproperly. See your dealer forservice.

Passenger SensingSystemThe vehicle has a passengersensing system for the frontoutboard passenger position. The



passenger airbag status indicatorwill light on the instrument panelwhen the vehicle is started.

The words ON and OFF will bevisible during the system check.When the system check iscomplete, either the word ON or theword OFF will be visible. SeePassenger Airbag Status Indicatoron page 5-20.

The passenger sensing systemturns off the front outboardpassenger frontal airbag undercertain conditions. No other airbagis affected by the passengersensing system.

The passenger sensing systemworks with sensors that are part ofthe front outboard passenger seat.The sensors are designed to detect

the presence of a properly-seatedoccupant and determine if the frontoutboard passenger frontal airbagshould be allowed to inflate or not.

According to accident statistics,children are safer when properlysecured in a rear seat in the correctchild restraint for their weightand size.

Whenever possible, children aged12 and under should be secured ina rear seating position.

Never put a rear-facing child seat inthe front. This is because the risk tothe rear-facing child is so great,if the airbag inflates.

{ Warning

A child in a rear-facing childrestraint can be seriously injuredor killed if the passenger frontalairbag inflates. This is becausethe back of the rear-facing childrestraint would be very close to

(Continued)

Warning (Continued)

the inflating airbag. A child in aforward-facing child restraint canbe seriously injured or killed if thepassenger frontal airbag inflatesand the passenger seat is in aforward position.

Even if the passenger sensingsystem has turned off thepassenger frontal airbag, nosystem is fail-safe. No one canguarantee that an airbag will notinflate under some unusualcircumstance, even though theairbag is off.

Secure rear-facing child restraintsin a rear seat, even if the airbagis off. If you secure aforward-facing child restraint inthe front outboard passengerseat, always move the seat as farback as it will go. It is better tosecure the child restraint in arear seat.



The passenger sensing system isdesigned to turn off the frontoutboard passenger frontal airbag if:. The front outboard passenger

seat is unoccupied.. The system determines that an

infant is present in a childrestraint.

. A front outboard passengertakes his/her weight off of theseat for a period of time.

. There is a critical problem withthe airbag system or thepassenger sensing system.

When the passenger sensingsystem has turned off the frontoutboard passenger frontal airbag,the off indicator will light and stay litas a reminder that the airbag is off.See Passenger Airbag StatusIndicator on page 5-20.

The passenger sensing system isdesigned to turn on the frontoutboard passenger frontal airbaganytime the system senses that aperson of adult size is sitting

properly in the front outboardpassenger seat. When thepassenger sensing system hasallowed the airbag to be enabled,the on indicator will light and stay litas a reminder that the airbag isactive.

For some children, includingchildren in child restraints and forvery small adults, the passengersensing system may or may not turnoff the front outboard passengerfrontal airbag, depending upon theperson's seating posture and bodybuild. Everyone in the vehicle whohas outgrown child restraints shouldwear a safety belt properly —whether or not there is an airbag forthat person.

{ Warning

If the airbag readiness light evercomes on and stays on, it meansthat something may be wrongwith the airbag system. To help

(Continued)

Warning (Continued)

avoid injury to yourself or others,have the vehicle serviced rightaway. See Airbag ReadinessLight on page 5-20 for moreinformation, including importantsafety information.

If the On Indicator Is Lit for aChild Restraint

The passenger sensing system isdesigned to turn off the frontoutboard passenger frontal airbag ifthe system determines that an infantis present in a child restraint. If achild restraint has been installedand the on indicator is lit:

1. Turn the vehicle off.

2. Remove the child restraint fromthe vehicle.

3. Remove any additional itemsfrom the seat such as blankets,cushions, seat covers, seatheaters, or seat massagers.



4. Reinstall the child restraintfollowing the directions providedby the child restraintmanufacturer and refer toSecuring Child Restraints (RearSeat) on page 3-46 or SecuringChild Restraints (FrontPassenger Seat) on page 3-48.

5. If, after reinstalling the childrestraint and restarting thevehicle, the on indicator is still lit,turn the vehicle off. Then slightlyrecline the vehicle seatback andadjust the seat cushion,if adjustable, to make sure thatthe vehicle seatback is notpushing the child restraint intothe seat cushion.

Also make sure the childrestraint is not trapped under thevehicle head restraint. If thishappens, adjust the headrestraint. See Head Restraintson page 3-2.

6. Restart the vehicle.

The passenger sensing system mayor may not turn off the airbag for achild in a child restraint dependingupon the child's size. It is better tosecure the child restraint in arear seat.

If the Off Indicator Is Lit for anAdult-Sized Occupant

If a person of adult-size is sitting inthe front outboard passenger seat,but the off indicator is lit, it could bebecause that person is not sittingproperly in the seat. Use thefollowing steps to allow the systemto detect that person and enable thefront outboard passenger frontalairbag:

1. Turn the vehicle off.

2. Remove any additional materialfrom the seat, such as blankets,cushions, seat covers, seatheaters, seat massagers, alaptop, or other electronicdevices.

3. Place the seatback in the fullyupright position.

4. Have the person sit upright inthe seat, centered on the seatcushion, with legs comfortablyextended.

5. Restart the vehicle and have theperson remain in this position fortwo to three minutes after the onindicator is lit.



{ Warning

If the front outboard passengerairbag is turned off for anadult-sized occupant, the airbagwill not be able to inflate and helpprotect that person in a crash,resulting in an increased risk ofserious injury or even death. Anadult-sized occupant should notride in the front outboardpassenger seat, if the passengerairbag off indicator is lit.

Additional Factors AffectingSystem Operation

Safety belts help keep thepassenger in position on the seatduring vehicle maneuvers andbraking, which helps the passengersensing system maintain thepassenger airbag status. See“Safety Belts” and “Child Restraints”in the Index for additionalinformation about the importance ofproper restraint use.

A thick layer of additional material,such as a blanket or cushion,or aftermarket equipment such asseat covers, seat heaters, and seatmassagers can affect how well thepassenger sensing systemoperates. We recommend that younot use seat covers or otheraftermarket equipment except whenapproved by GM for your specificvehicle. See Adding Equipment tothe Airbag-Equipped Vehicle onpage 3-29 for more informationabout modifications that can affecthow the system operates.

A wet seat can affect theperformance of the passengersensing system. Here is how:. The passenger sensing system

may turn off the passengerfrontal airbag when liquid issoaked into the seat. If thishappens, the off indicator will belit, and the airbag readiness lighton the instrument panel will alsobe lit.

. Liquid pooled on the seat thathas not soaked in may make itmore likely that the passengersensing system will turn on thepassenger frontal airbag while achild restraint or child occupantis on the seat. If the passengerfrontal airbag is turned on, theon indicator will be lit.

If the passenger seat gets wet, drythe seat immediately. If the airbagreadiness light is lit, do not install achild restraint or allow anyone tooccupy the seat. See AirbagReadiness Light on page 5-20 forimportant safety information.

The on indicator may be lit if anobject, such as a briefcase,handbag, grocery bag, laptop orother electronic device, is put on anunoccupied seat. If this is notdesired remove the object fromthe seat.



{ Warning

Stowing of articles under thepassenger seat or between thepassenger seat cushion andseatback may interfere with theproper operation of the passengersensing system.

Servicing theAirbag-Equipped VehicleAirbags affect how the vehicleshould be serviced. There are partsof the airbag system in severalplaces around the vehicle. Yourdealer and the service manual haveinformation about servicing thevehicle and the airbag system. Topurchase a service manual, seeService Publications OrderingInformation on page 13-11.

{ Warning

For up to 10 seconds after thevehicle is turned off and thebattery is disconnected, an airbagcan still inflate during improperservice. You can be injured if youare close to an airbag when itinflates. Avoid yellow connectors.They are probably part of theairbag system. Be sure to followproper service procedures, andmake sure the person performingwork for you is qualified to do so.

Adding Equipment to theAirbag-Equipped VehicleAdding accessories that change thevehicle's frame, bumper system,height, front end, or side sheetmetal, may keep the airbag systemfrom working properly. Theoperation of the airbag system canalso be affected by changing anyparts of the front seats, safety belts,the airbag sensing and diagnostic

module, steering wheel, instrumentpanel, any of the airbag modules,ceiling or pillar garnish trim, frontsensors, side impact sensors,or airbag wiring.

Your dealer and the service manualhave information about the locationof the airbag sensors, sensing anddiagnostic module, and airbagwiring.

In addition, the vehicle has apassenger sensing system for thefront outboard passenger position,which includes sensors that are partof the passenger seat. Thepassenger sensing system may notoperate properly if the original seattrim is replaced with non-GMcovers, upholstery, or trim; or withGM covers, upholstery, or trimdesigned for a different vehicle. Anyobject, such as an aftermarket seatheater or a comfort-enhancing pador device, installed under or on topof the seat fabric, could alsointerfere with the operation of thepassenger sensing system. Thiscould either prevent proper



deployment of the passengerairbag(s) or prevent the passengersensing system from properlyturning off the passenger airbag(s).See Passenger Sensing System onpage 3-24.

If the vehicle has rollover roof-railairbags, see Different Size Tiresand Wheels on page 10-58 foradditional important information.

If you have to modify your vehiclebecause you have a disability andyou have questions about whetherthe modifications will affect thevehicle's airbag system, or if youhave questions about whether theairbag system will be affected if thevehicle is modified for any otherreason, call Customer Assistance.See Customer Assistance Officeson page 13-3.

Airbag System CheckThe airbag system does not needregularly scheduled maintenance orreplacement. Make sure the airbag

readiness light is working. SeeAirbag Readiness Light onpage 5-20.

{ Caution

If an airbag covering is damaged,opened, or broken, the airbagmay not work properly. Do notopen or break the airbagcoverings. If there are anyopened or broken airbagcoverings, have the airbagcovering and/or airbag modulereplaced. For the location of theairbags, see Where Are theAirbags? on page 3-20. See yourdealer for service.

Replacing Airbag SystemParts after a Crash

{ Warning

A crash can damage the airbagsystems in the vehicle.A damaged airbag system maynot work properly and may notprotect you and yourpassenger(s) in a crash, resultingin serious injury or even death. Tohelp make sure the airbagsystems are working properlyafter a crash, have theminspected and any necessaryreplacements made as soon aspossible.

If an airbag inflates, you will need toreplace airbag system parts. Seeyour dealer for service.

If the airbag readiness light stays onafter the vehicle is started or comeson when you are driving, the airbagsystem may not work properly. Have



the vehicle serviced right away. SeeAirbag Readiness Light onpage 5-20 for more information.

Vehicles with eAssist have a highvoltage battery and a standard 12‐volt battery. If an airbag inflates orthe vehicle has been in a crash, thevehicle's sensing system may shutdown the high voltage system.When this occurs, the high voltagebattery is disconnected and thevehicle is not charging the 12‐voltbattery or the electrical system. Thevehicle may start but it shuts downonce the 12‐volt battery is depleted.When the 12‐volt battery isdepleted, the vehicle will not startand the on‐board jump start featureis disabled. The airbag readinesslight and/or the 12‐volt batterywarning light are displayed. Beforethe vehicle can be operated again, itmust be serviced at your dealer.

Child Restraints

Older Children

Older children who have outgrownbooster seats should wear thevehicle safety belts.

The manufacturer instructions thatcome with the booster seat state theweight and height limitations for thatbooster. Use a booster seat with alap-shoulder belt until the childpasses the fit test below:. Sit all the way back on the seat.

Do the knees bend at the seatedge? If yes, continue. If no,return to the booster seat.

. Buckle the lap-shoulder belt.Does the shoulder belt rest onthe shoulder? If yes, continue.If no, try using the rear safetybelt comfort guide. See “RearSafety Belt Comfort Guides”under Lap-Shoulder Belt onpage 3-12. If the shoulder beltstill does not rest on theshoulder, then return to thebooster seat.

. Does the lap belt fit low andsnug on the hips, touching thethighs? If yes, continue. If no,return to the booster seat.



. Can proper safety belt fit bemaintained for the length of thetrip? If yes, continue. If no,return to the booster seat.

Q: What is the proper way towear safety belts?

A: An older child should wear alap-shoulder belt and get theadditional restraint a shoulderbelt can provide. The shoulderbelt should not cross the face orneck. The lap belt should fitsnugly below the hips, justtouching the top of the thighs.This applies belt force to thechild's pelvic bones in a crash.It should never be worn over theabdomen, which could causesevere or even fatal internalinjuries in a crash.

Also see “Rear Safety Belt ComfortGuides” under Lap-Shoulder Belt onpage 3-12.

According to accident statistics,children are safer when properlyrestrained in a rear seating position.

In a crash, children who are notbuckled up can strike other peoplewho are buckled up, or can bethrown out of the vehicle. Olderchildren need to use safety beltsproperly.

{ Warning

Never allow more than one childto wear the same safety belt. Thesafety belt cannot properly spreadthe impact forces. In a crash, theycan be crushed together andseriously injured. A safety beltmust be used by only one personat a time.

{ Warning

Never allow a child to wear thesafety belt with the shoulder beltbehind their back. A child can beseriously injured by not wearingthe lap-shoulder belt properly. In acrash, the child would not berestrained by the shoulder belt.The child could move too farforward increasing the chance ofhead and neck injury. The childmight also slide under the lap

(Continued)



Warning (Continued)

belt. The belt force would then beapplied right on the abdomen.That could cause serious or fatalinjuries. The shoulder belt shouldgo over the shoulder and acrossthe chest.

Infants and YoungChildrenEveryone in a vehicle needsprotection! This includes infants andall other children. Neither thedistance traveled nor the age andsize of the traveler changes theneed, for everyone, to use safetyrestraints. In fact, the law in everystate in the United States and inevery Canadian province sayschildren up to some age must berestrained while in a vehicle.

{ Warning

Children can be seriously injuredor strangled if a shoulder belt iswrapped around their neck andthe safety belt continues totighten. Never leave childrenunattended in a vehicle and neverallow children to play with thesafety belts.

Every time infants and youngchildren ride in vehicles, they shouldhave the protection provided byappropriate child restraints. Neitherthe vehicle's safety belt system norits airbag system is designedfor them.

Children who are not restrainedproperly can strike other people,or can be thrown out of the vehicle.

{ Warning

Never hold an infant or a childwhile riding in a vehicle. Due tocrash forces, an infant or a childwill become so heavy it is notpossible to hold it during a crash.For example, in a crash at only40 km/h (25 mph), a 5.5 kg (12 lb)infant will suddenly become a110 kg (240 lb) force on a person'sarms. An infant should besecured in an appropriaterestraint.



{ Warning

Children who are up against,or very close to, any airbag whenit inflates can be seriously injuredor killed. Never put a rear-facingchild restraint in the frontoutboard seat. Secure arear-facing child restraint in a rearseat. It is also better to secure aforward-facing child restraint in arear seat. If you must secure aforward-facing child restraint in

(Continued)

Warning (Continued)

the front outboard seat, alwaysmove the front passenger seat asfar back as it will go.

Q: What are the different types ofadd-on child restraints?

A: Add-on child restraints, whichare purchased by the vehicleowner, are available in four basictypes. Selection of a particularrestraint should take intoconsideration not only the child's

weight, height, and age but alsowhether or not the restraint willbe compatible with the motorvehicle in which it will be used.

For most basic types of childrestraints, there are manydifferent models available. Whenpurchasing a child restraint, besure it is designed to be used ina motor vehicle. If it is, therestraint will have a label sayingthat it meets federal motorvehicle safety standards.

The restraint manufacturerinstructions that come with therestraint state the weight andheight limitations for a particularchild restraint. In addition, thereare many kinds of restraintsavailable for children withspecial needs.



{ Warning

To reduce the risk of neck andhead injury during a crash, infantsneed complete support. In acrash, if an infant is in arear-facing child restraint, thecrash forces can be distributedacross the strongest part of aninfant's body, the back andshoulders. Infants should alwaysbe secured in rear-facing childrestraints.

{ Warning

A young child's hip bones are stillso small that the vehicle's regularsafety belt may not remain low onthe hip bones, as it should.Instead, it may settle up aroundthe child's abdomen. In a crash,the belt would apply force on abody area that is unprotected byany bony structure. This alonecould cause serious or fatalinjuries. To reduce the risk ofserious or fatal injuries during acrash, young children shouldalways be secured in appropriatechild restraints.

Child Restraint Systems

Rear-Facing Infant Seat

A rear-facing infant seat providesrestraint with the seating surfaceagainst the back of the infant.

The harness system holds the infantin place and, in a crash, acts tokeep the infant positioned in therestraint.



Forward-Facing Child Seat

A forward-facing child seat providesrestraint for the child's body with theharness.

Booster Seats

A booster seat is a child restraintdesigned to improve the fit of thevehicle's safety belt system.A booster seat can also help a childto see out the window.

Securing an Add-On ChildRestraint in the Vehicle

{ Warning

A child can be seriously injured orkilled in a crash if the childrestraint is not properly secured inthe vehicle. Secure the childrestraint properly in the vehicleusing the vehicle safety belt orLATCH system, following theinstructions that came with thatchild restraint and the instructionsin this manual.

To help reduce the chance of injury,the child restraint must be securedin the vehicle. Child restraintsystems must be secured in vehicleseats by lap belts or the lap beltportion of a lap-shoulder belt, or bythe LATCH system. See LowerAnchors and Tethers for Children(LATCH System) on page 3-38.



Children can be endangered in acrash if the child restraint is notproperly secured in the vehicle.

When securing an add-on childrestraint, refer to the instructionsthat come with the restraint whichmay be on the restraint itself or in abooklet, or both, and to this manual.The child restraint instructions areimportant, so if they are notavailable, obtain a replacementcopy from the manufacturer.

Keep in mind that an unsecuredchild restraint can move around in acollision or sudden stop and injurepeople in the vehicle. Be sure toproperly secure any child restraint inthe vehicle— even when no child isin it.

In some areas of the United Statesand Canada, Certified ChildPassenger Safety Technicians(CPSTs) are available to inspectand demonstrate how to correctlyuse and install child restraints. Inthe U.S., refer to the NationalHighway Traffic Safety

Administration (NHTSA) website tolocate the nearest child safety seatinspection station. For CPSTavailability in Canada, check withTransport Canada or the ProvincialMinistry of Transportation office.

Securing the Child Within theChild Restraint

{ Warning

A child can be seriously injured orkilled in a crash if the child is notproperly secured in the childrestraint. Secure the childproperly following the instructionsthat came with that child restraint.

Where to Put theRestraintAccording to accident statistics,children and infants are safer whenproperly restrained in a childrestraint system or infant restraintsystem secured in a rear seatingposition.

Whenever possible, children aged12 and under should be secured ina rear seating position.

Never put a rear-facing child seat inthe front. This is because the risk tothe rear-facing child is so great if theairbag deploys.

{ Warning

A child in a rear-facing childrestraint can be seriously injuredor killed if the front passengerairbag inflates. This is becausethe back of the rear-facing childrestraint would be very close tothe inflating airbag. A child in aforward-facing child restraint canbe seriously injured or killed if thefront passenger airbag inflatesand the passenger seat is in aforward position.

Even if the passenger sensingsystem has turned off the frontpassenger frontal airbag, no

(Continued)



Warning (Continued)

system is fail-safe. No one canguarantee that an airbag will notdeploy under some unusualcircumstance, even though it isturned off.

Secure rear-facing child restraintsin a rear seat, even if the airbagis off. If you secure aforward-facing child restraint inthe front seat, always move thefront passenger seat as far backas it will go. It is better to securethe child restraint in a rear seat.

See Passenger Sensing Systemon page 3-24 for additionalinformation.

When securing a child restraint in arear seating position, study theinstructions that came with the childrestraint to make sure it iscompatible with this vehicle.

Child restraints and booster seatsvary considerably in size, and somemay fit in certain seating positionsbetter than others. Always makesure the child restraint is properlysecured.

Depending on where you place thechild restraint and the size of thechild restraint, you may not be ableto access adjacent safety beltassemblies or LATCH anchors foradditional passengers or childrestraints. Adjacent seatingpositions should not be used if thechild restraint prevents access to orinterferes with the routing of thesafety belt.

Wherever a child restraint isinstalled, be sure to secure the childrestraint properly.

Keep in mind that an unsecuredchild restraint can move around in acollision or sudden stop and injurepeople in the vehicle. Be sure toproperly secure any child restraint inthe vehicle — even when no child isin it.

Lower Anchors andTethers for Children(LATCH System)The LATCH system secures a childrestraint during driving or in a crash.LATCH attachments on the childrestraint are used to attach the childrestraint to the anchors in thevehicle. The LATCH system isdesigned to make installation of achild restraint easier.

In order to use the LATCH system inyour vehicle, you need a childrestraint that has LATCHattachments. LATCH-compatiblerear-facing and forward-facing childseats can be properly installedusing either the LATCH anchors orthe vehicle’s safety belts. Do notuse both the safety belts and theLATCH anchorage system to securea rear-facing or forward-facingchild seat.

Booster seats use the vehicle’ssafety belts to secure the child inthe booster seat. If the manufacturer



recommends that the booster seatbe secured with the LATCH system,this can be done as long as thebooster seat can be positionedproperly and there is no interferencewith the proper positioning of thelap-shoulder belt on the child.

Make sure to follow the instructionsthat came with the child restraint,and also the instructions in thismanual.

When installing a child restraint witha top tether, you must also useeither the lower anchors or thesafety belts to properly secure thechild restraint. A child restraint mustnever be installed using only the toptether and anchor.

The LATCH anchorage system canbe used until the combined weightof the child plus the child restraint is29.5 kg (65 lbs). Use the safety beltalone instead of the LATCHanchorage system once thecombined weight is more than29.5 kg (65 lbs).

The following explains how to attacha child restraint with theseattachments in the vehicle.

Not all vehicle seating positions orchild restraints have lower anchorsand attachments or top tetheranchors and attachments.

Lower Anchors

Lower anchors (1) are metal barsbuilt into the vehicle. There are twolower anchors for each LATCHseating position that willaccommodate a child restraint withlower attachments (2).

Top Tether Anchor

A top tether (3, 4) anchors the top ofthe child restraint to the vehicle.A top tether anchor is built into thevehicle. The top tetherattachment (2) on the child restraintconnects to the top tether anchor inthe vehicle in order to reduce theforward movement and rotation ofthe child restraint during driving or ina crash.



The child restraint may have asingle tether (3) or a dual tether (4).Either will have a singleattachment (2) to secure the toptether to the anchor.

Some child restraints that have atop tether are designed for use withor without the top tether beingattached. Others require the toptether always to be attached. InCanada, the law requires thatforward-facing child restraints havea top tether, and that the tether beattached. Be sure to read and followthe instructions for the childrestraint.

Lower Anchor and Top TetherAnchor Locations

Rear Seat

I (Top Tether Anchor): Seatingpositions with top tether anchors.

H (Lower Anchor): Seatingpositions with two lower anchors.

To assist in locating the loweranchors, each rear anchor positionhas a label, near the creasebetween the seatback and the seatcushion.

To assist in locating the top tetheranchors, the top tether anchorsymbol is on the cover.



The top tether anchors are underthe covers, behind the rear seat, onthe filler panel. Be sure to use ananchor on the same side of thevehicle as the seating positionwhere the child restraint will beplaced.

Do not secure a child restraint in aposition without a top tether anchorif a national or local law requiresthat the top tether be attached, or ifthe instructions that come with thechild restraint say that the top tethermust be attached.

According to accident statistics,children and infants are safer whenproperly restrained in a childrestraint system or infant restraintsystem secured in a rear seatingposition. See Where to Put theRestraint on page 3-37 foradditional information.

Securing a Child RestraintDesigned for the LATCHSystem

{ Warning

If a LATCH-type child restraint isnot attached to anchors or withthe safety belt, the child restraintwill not be able to protect the childcorrectly. In a crash, the childcould be seriously injured orkilled. Install a LATCH-type childrestraint properly using theanchors, or use the vehicle safetybelts to secure the restraint,

(Continued)

Warning (Continued)

following the instructions thatcame with the child restraint andthe instructions in this manual.

{ Warning

Do not attach more than one childrestraint to a single anchor.Attaching more than one childrestraint to a single anchor couldcause the anchor or attachmentto come loose or even breakduring a crash. A child or otherscould be injured. To reduce therisk of serious or fatal injuriesduring a crash, attach only onechild restraint per anchor.



{ Warning

Children can be seriously injuredor strangled if a shoulder belt iswrapped around their neck andthe safety belt continues totighten. Buckle any unused safetybelts behind the child restraint sochildren cannot reach them. Pullthe shoulder belt all the way outof the retractor to set the lock,if the vehicle has one, after thechild restraint has been installed.

{ Caution

Do not let the LATCHattachments rub against thevehicle’s safety belts. This maydamage these parts. If necessary,move buckled safety belts toavoid rubbing the LATCHattachments.

(Continued)

Caution (Continued)

Do not fold the empty rear seatwith a safety belt buckled. Thiscould damage the safety belt orthe seat. Unbuckle and return thesafety belt to its stowed position,before folding the seat.

If you need to secure more than onechild restraint in the rear seat, seeWhere to Put the Restraint onpage 3-37.

You cannot secure three childrestraints using the LATCH anchorsin the rear seat at the same time,but you can install two of them.If you want to do this, install oneLATCH child restraint in the rightrear seating position, and install theother one either in the left rearseating position or in the centerseating position. If you need toinstall child restraints in both thecenter and left rear seatingpositions, the one in the center

seating position will need to besecured using the vehicle safetybelts instead of the LATCH anchors.

Refer to the following illustration tolearn which anchors to use.

There are five lower LATCH anchorsin the rear seat.. Use anchors 1 and 2 when

installing a child restraint usingLATCH in the right rear seatingposition.



. Use anchors 3 and 4 wheninstalling a child restraint usingLATCH in the center rear seatingposition.

. Use anchors 4 and 5 wheninstalling a child restraint usingLATCH in the left rear seatingposition.

Installing child restraints usingLATCH in the center and left rearseating positions at the same time isprohibited.

Make sure to attach the childrestraint at the proper anchorlocation.

This system is designed to makeinstallation of child restraints easier.When using lower anchors, do notuse the vehicle's safety belts.Instead use the vehicle's anchorsand child restraint attachments tosecure the restraints. Somerestraints also use another vehicleanchor to secure a top tether.

1. Attach and tighten the lowerattachments to the loweranchors. If the child restraint

does not have lowerattachments or the desiredseating position does not havelower anchors, secure the childrestraint with the top tether andthe safety belts. Refer to thechild restraint manufacturerinstructions and the instructionsin this manual.

1.1. Find the lower anchors forthe desired seatingposition.

1.2. Put the child restraint onthe seat.

If the head restraintinterferes with the properinstallation of the childrestraint, the head restraintmay be removed. See“Head Restraint Removaland Reinstallation” at theend of this section.

1.3. Attach and tighten the lowerattachments on the childrestraint to the loweranchors.

2. If the child restraint manufacturerrecommends that the top tetherbe attached, attach and tightenthe top tether to the top tetheranchor, if equipped. Refer to thechild restraint instructions andthe following steps:

2.1. Find the top tether anchor.

Open the cover to exposethe anchor.

2.2. Route, attach, and tightenthe top tether according tothe child restraintinstructions and thefollowing instructions:



If the position you are usingdoes not have a headrestor head restraint, or theheadrest or head restrainthas been removed, and youare using a single tether,route the tether over theseatback.

If the position you are usingdoes not have a headrestor head restraint, or theheadrest or head restrainthas been removed, and youare using a dual tether,route the tether over theseatback.

If the position you are usinghas an adjustable headrestor head restraint and youare using a single tether,route the tether under theheadrest or head restraintand in between theheadrest or head restraintposts.

If the position you are usinghas an adjustable headrestor head restraint and youare using a dual tether,route the tether around theheadrest or head restraint.

3. Before placing a child in thechild restraint, make sure it issecurely held in place. To check,



grasp the child restraint at theLATCH path and attempt tomove it side to side and backand forth. There should be nomore than 2.5 cm (1 in) ofmovement, for properinstallation.

Head Restraint Removal andReinstallation

The rear outboard head restraintscan be removed if they interfere withthe proper installation of the childrestraint.

To remove the head restraint:

1. Partially fold the seatbackforward. See Rear Seats onpage 3-9 for additionalinformation.

2. Press both buttons on the headrestraint posts at the same time,and pull up on the headrestraint.

3. Store the head restraint in thetrunk of the vehicle.

4. When the child restraint isremoved, reinstall the headrestraint before the seatingposition is used.

{ Warning

With head restraints that are notinstalled and adjusted properly,there is a greater chance thatoccupants will suffer a neck/spinal injury in a crash. Do notdrive until the head restraints forall occupants are installed andadjusted properly.

To reinstall the head restraint:



1. Insert the head restraint postsinto the holes in the top of theseatback. The notches on theposts must face the driver sideof the vehicle.

2. Push the head restraint down.

If necessary, press the heightadjustment release button tofurther lower the head restraint.See Head Restraints onpage 3-2.

3. Try to move the head restraint tomake sure that it is locked inplace.

Replacing LATCH SystemParts After a Crash

{ Warning

A crash can damage the LATCHsystem in the vehicle. A damagedLATCH system may not properlysecure the child restraint,resulting in serious injury or even

(Continued)

Warning (Continued)

death in a crash. To help makesure the LATCH system isworking properly after a crash,see your dealer to have thesystem inspected and anynecessary replacements made assoon as possible.

If the vehicle has the LATCH systemand it was being used during acrash, new LATCH system partsmay be needed.

New parts and repairs may benecessary even if the LATCHsystem was not being used at thetime of the crash.

Securing Child Restraints(Rear Seat)When securing a child restraint in arear seating position, study theinstructions that came with the childrestraint to make sure it iscompatible with this vehicle.

If the child restraint has the LATCHsystem, see Lower Anchors andTethers for Children (LATCHSystem) on page 3-38 for how andwhere to install the child restraintusing LATCH. If a child restraint issecured in the vehicle using asafety belt and it uses a top tether,see Lower Anchors and Tethers forChildren (LATCH System) onpage 3-38 for top tether anchorlocations.

Do not secure a child seat in aposition without a top tether anchorif a national or local law requiresthat the top tether be anchored, or ifthe instructions that come with thechild restraint say that the top strapmust be anchored.

If the child restraint does not havethe LATCH system, you will beusing the safety belt to secure thechild restraint in this position. Besure to follow the instructions thatcame with the child restraint. Securethe child in the child restraint whenand as the instructions say.



If more than one child restraintneeds to be installed in the rearseat, be sure to read Where to Putthe Restraint on page 3-37.

1. Put the child restraint onthe seat.

If the head restraint interfereswith the proper installation of thechild restraint, the head restraintmay be removed. See “HeadRestraint Removal andReinstallation” under LowerAnchors and Tethers forChildren (LATCH System) onpage 3-38.

2. Pick up the latch plate, and runthe lap and shoulder portions ofthe vehicle's safety belt throughor around the restraint. The childrestraint instructions will showyou how.



4. Pull the shoulder belt all the wayout of the retractor to set thelock. When the retractor lock isset, the belt can be tightened butnot pulled out of the retractor.



5. To tighten the belt, push downon the child restraint, pull theshoulder portion of the belt totighten the lap portion of the belt,and feed the shoulder belt backinto the retractor. When installinga forward-facing child restraint, itmay be helpful to use your kneeto push down on the childrestraint as you tighten the belt.

Try to pull the belt out of theretractor to make sure theretractor is locked. If theretractor is not locked, repeatSteps 4 and 5.

6. If the child restraint has a toptether, follow the child restraintmanufacturer's instructionsregarding the use of the toptether. See Lower Anchors andTethers for Children (LATCHSystem) on page 3-38 for moreinformation.

7. Before placing a child in thechild restraint, make sure it issecurely held in place. To check,grasp the child restraint at thesafety belt path and attempt tomove it side to side and backand forth. When the childrestraint is properly installed,there should be no more than2.5 cm (1 in) of movement.

To remove the child restraint,unbuckle the vehicle safety belt andlet it return to the stowed position.If the top tether is attached to a toptether anchor, disconnect it. If thehead restraint was removed,

reinstall it before the seatingposition is used. See “HeadRestraint Removal andReinstallation” under Lower Anchorsand Tethers for Children (LATCHSystem) on page 3-38 for additionalinformation on installing the headrestraint properly.

Securing Child Restraints(Front Passenger Seat)This vehicle has airbags. A rearseat is a safer place to secure aforward-facing child restraint. SeeWhere to Put the Restraint onpage 3-37.

In addition, the vehicle has apassenger sensing system which isdesigned to turn off the frontoutboard passenger frontal airbagunder certain conditions. SeePassenger Sensing System onpage 3-24 and Passenger AirbagStatus Indicator on page 5-20 formore information, includingimportant safety information.



Never put a rear-facing child seat inthe front. This is because the risk tothe rear-facing child is so great if theairbag deploys.

{ Warning

A child in a rear-facing childrestraint can be seriously injuredor killed if the front outboardpassenger frontal airbag inflates.This is because the back of therear-facing child restraint wouldbe very close to the inflatingairbag. A child in a forward-facingchild restraint can be seriouslyinjured or killed if the frontoutboard passenger frontal airbaginflates and the passenger seat isin a forward position.

Even if the passenger sensingsystem has turned off the frontoutboard passenger frontalairbag, no system is fail-safe. Noone can guarantee that an airbag

(Continued)

Warning (Continued)

will not deploy under someunusual circumstance, eventhough it is turned off.

Secure rear-facing child restraintsin a rear seat, even if the airbagis off. If you secure aforward-facing child restraint inthe front seat, always move thefront passenger seat as far backas it will go. It is better to securethe child restraint in a rear seat.

See Passenger Sensing Systemon page 3-24 for additionalinformation.

If the child restraint has the LATCHsystem, see Lower Anchors andTethers for Children (LATCHSystem) on page 3-38 for how andwhere to install the child restraintusing LATCH. If a child restraint is

secured using a safety belt and ituses a top tether, see LowerAnchors and Tethers for Children(LATCH System) on page 3-38 fortop tether anchor locations.

Do not secure a child seat in aposition without a top tether anchorif a national or local law requiresthat the top tether be anchored, or ifthe instructions that come with thechild restraint say that the top strapmust be anchored.

In Canada, the law requires thatforward-facing child restraints havea top tether, and that the tether beattached.

You will be using the lap-shoulderbelt to secure the child restraint inthis position. Follow the instructionsthat came with the child restraint.

1. Move the seat as far back as itwill go before securing theforward-facing child restraint.

When the passenger sensingsystem has turned off the frontoutboard passenger frontal



airbag, the off indicator on thepassenger airbag statusindicator should light and stay litwhen you start the vehicle. SeePassenger Airbag StatusIndicator on page 5-20.

2. Put the child restraint onthe seat.

3. Pick up the latch plate, and runthe lap and shoulder portions ofthe vehicle's safety belt throughor around the restraint. The childrestraint instructions will showyou how.



5. Pull the shoulder belt all the wayout of the retractor to set thelock. When the retractor lock isset, the belt can be tightened butnot pulled out of the retractor.

6. To tighten the belt, push downon the child restraint, pull theshoulder portion of the belt totighten the lap portion of the belt,and feed the shoulder belt backinto the retractor. When installinga forward-facing child restraint, itmay be helpful to use your kneeto push down on the childrestraint as you tighten the belt.

Try to pull the belt out of theretractor to make sure theretractor is locked. If theretractor is not locked, repeatSteps 5 and 6.



7. Before placing a child in thechild restraint, make sure it issecurely held in place. To check,grasp the child restraint at thesafety belt path and attempt tomove it side to side and backand forth. When the childrestraint is properly installed,there should be no more than2.5 cm (1 in) of movement.

If the airbag is off, the off indicator inthe passenger airbag statusindicator will come on and stay onwhen the vehicle is started.

If a child restraint has been installedand the on indicator is lit, see “If theOn Indicator Is Lit for a ChildRestraint ” under PassengerSensing System on page 3-24 formore information.

To remove the child restraint,unbuckle the vehicle safety belt andlet it return to the stowed position.



2 NOTES


Storage 4-1

Storage

Storage CompartmentsStorage Compartments . . . . . . . 4-1Instrument Panel Storage . . . . . 4-1Glove Box . . . . . . . . . . . . . . . . . . . . 4-1Cupholders . . . . . . . . . . . . . . . . . . . 4-2Rear Storage . . . . . . . . . . . . . . . . . 4-3Center Console Storage . . . . . . 4-3

Additional Storage FeaturesCargo Net . . . . . . . . . . . . . . . . . . . . . 4-3Convenience Net . . . . . . . . . . . . . 4-4

StorageCompartments

{ Warning

Do not store heavy or sharpobjects in storage compartments.In a crash, these objects maycause the cover to open andcould result in injury.

Instrument Panel Storage

There is a storage compartment onthe driver side of the instrumentpanel. Lift the latch to open.

Glove BoxLift up the handle to open theglove box.


4-2 Storage

Cupholders

Two cupholders are in the centerconsole.

Slide the door to access them. If equipped, pull the second rowseat armrest down to accesscupholders.


Storage 4-3

Rear Storage

Pull down the armrest. Press thebutton to lift the cover. Close thecover before folding the armrest up.

Center Console Storage

Press the button to access thestorage under the armrest. Thereare two USB ports, an SD cardreader, and a power outlet inside.If equipped, there is an auxillaryinput jack. See the infotainmentmanual.

Additional StorageFeatures

Cargo Net

There is a cargo net for storingitems on the side of the trunk.


4-4 Storage

Convenience Net

If equipped, the convenience net isin the trunk and can be used tostore small loads. The net shouldnot be used to store heavy loads.Attach the loops on each side of thenet to the hooks located on thesides of the trunk.


Instruments and Controls 5-1

Instruments andControls

ControlsSteering Wheel Adjustment . . . 5-2Steering Wheel Controls . . . . . . 5-2Heated Steering Wheel . . . . . . . 5-3Horn . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3Windshield Wiper/Washer . . . . . 5-3Compass . . . . . . . . . . . . . . . . . . . . . 5-4Clock . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Power Outlets . . . . . . . . . . . . . . . . . 5-5Cigarette Lighter . . . . . . . . . . . . . . 5-6Ashtrays . . . . . . . . . . . . . . . . . . . . . . 5-7

Warning Lights, Gauges, andIndicatorsWarning Lights, Gauges, andIndicators . . . . . . . . . . . . . . . . . . . . 5-7

Instrument Cluster (BaseCluster) . . . . . . . . . . . . . . . . . . . . . . 5-9

Instrument Cluster (UplevelCluster) . . . . . . . . . . . . . . . . . . . . 5-13

Speedometer . . . . . . . . . . . . . . . . 5-16Odometer . . . . . . . . . . . . . . . . . . . . 5-16Trip Odometer . . . . . . . . . . . . . . . 5-16Tachometer . . . . . . . . . . . . . . . . . . 5-16

Fuel Gauge . . . . . . . . . . . . . . . . . . 5-17Engine Coolant TemperatureGauge . . . . . . . . . . . . . . . . . . . . . . 5-18

Safety Belt Reminders . . . . . . . 5-19Airbag Readiness Light . . . . . . 5-20Passenger Airbag StatusIndicator . . . . . . . . . . . . . . . . . . . . 5-20

Charging System Light . . . . . . 5-21MalfunctionIndicator Lamp . . . . . . . . . . . . . 5-21

Brake System WarningLight . . . . . . . . . . . . . . . . . . . . . . . 5-24

Electric Parking BrakeLight . . . . . . . . . . . . . . . . . . . . . . . 5-24

Service Electric Parking BrakeLight . . . . . . . . . . . . . . . . . . . . . . . 5-25

Antilock Brake System (ABS)Warning Light . . . . . . . . . . . . . . 5-25

Up-Shift Light . . . . . . . . . . . . . . . . 5-26Lane Departure Warning(LDW) Light . . . . . . . . . . . . . . . . 5-26

Vehicle Ahead Indicator . . . . . . 5-26Traction Off Light . . . . . . . . . . . . 5-27StabiliTrak® OFF Light . . . . . . . 5-27Traction Control System(TCS)/StabiliTrak® Light . . . . 5-27

Engine Coolant TemperatureWarning Light . . . . . . . . . . . . . . 5-28

Tire Pressure Light . . . . . . . . . . 5-28

Engine Oil Pressure Light . . . . 5-29Low Fuel Warning Light . . . . . . 5-29Security Light . . . . . . . . . . . . . . . . 5-30High-Beam On Light . . . . . . . . . 5-30Front Fog Lamp Light . . . . . . . . 5-30Lamps On Reminder . . . . . . . . . 5-30Cruise Control Light . . . . . . . . . 5-31Door Ajar Light . . . . . . . . . . . . . . 5-31

Information DisplaysPower Flows(eAssist Only) . . . . . . . . . . . . . . 5-31

Energy Information(eAssist Only) . . . . . . . . . . . . . . 5-33

Driver Information Center(DIC) (Base LevelCluster) . . . . . . . . . . . . . . . . . . . . 5-33

Driver Information Center(DIC) (Uplevel Cluster) . . . . . 5-35

Vehicle MessagesVehicle Messages . . . . . . . . . . . 5-39Battery Voltage and ChargingMessages . . . . . . . . . . . . . . . . . . 5-39

Brake System Messages . . . . 5-39Compass Messages . . . . . . . . . 5-40Cruise Control Messages . . . . 5-40Door Ajar Messages . . . . . . . . . 5-41


5-2 Instruments and Controls

Engine Cooling SystemMessages . . . . . . . . . . . . . . . . . . 5-41

Engine Oil Messages . . . . . . . . 5-42Engine Power Messages . . . . 5-42Fuel System Messages . . . . . . 5-42Key and Lock Messages . . . . . 5-43Object Detection SystemMessages . . . . . . . . . . . . . . . . . . 5-43

Ride Control SystemMessages . . . . . . . . . . . . . . . . . . 5-45

Security Messages . . . . . . . . . . 5-46Starting the VehicleMessages . . . . . . . . . . . . . . . . . . 5-46

Tire Messages . . . . . . . . . . . . . . . 5-46Transmission Messages . . . . . 5-47Washer Fluid Messages . . . . . 5-47Window Messages . . . . . . . . . . . 5-47

Vehicle PersonalizationVehicle Personalization . . . . . . 5-48

Universal Remote SystemUniversal Remote System . . . 5-54Universal Remote SystemProgramming . . . . . . . . . . . . . . . 5-54

Universal Remote SystemOperation . . . . . . . . . . . . . . . . . . 5-56

Controls

Steering WheelAdjustment

To adjust the steering wheel:

1. Pull the lever down.

2. Move the steering wheel upor down.

3. Pull or push the steering wheelcloser or away from you.

4. Pull the lever up to lock thesteering wheel in place.

Do not adjust the steering wheelwhile driving.

Steering Wheel ControlsThe infotainment system can beoperated by using the steeringwheel controls. See "SteeringWheel Controls" in the infotainmentmanual.



Heated Steering Wheel

( (Heated Steering Wheel):If equipped, the button is on thesteering wheel. Press to turn on oroff. A light on the button displayswhen the feature is turned on.

The steering wheel takes aboutthree minutes to start heating.

Horn

Pressa on the steering wheel padto sound the horn.

Windshield Wiper/Washer

The windshield wiper/washer leveris on the right side of the steeringcolumn. With the ignition in ACC/ACCESSORY or ON/RUN, movethe windshield wiper lever to selectthe wiper speed.

HI: Use for fast wipes.

LO: Use for slow wipes.

INT (Intermittent Wipes): Movethe lever up to INT for intermittentwipes, then turn the3 INT bandup for more frequent wipes or downfor less frequent wipes.

OFF: Use to turn the wipers off.

8 (Mist): For a single wipe, brieflymove the wiper lever down. Forseveral wipes, hold the wiperlever down.

nL (Windshield Washer): Pullthe windshield wiper lever towardyou to spray windshield washer fluidand activate the wipers. The wiperswill continue until the lever isreleased or the maximum wash timeis reached. When the windshieldwiper lever is released, additionalwipes may occur depending on howlong the windshield washer had



been activated. For moreinformation on filling the windshieldwasher fluid reservoir, see WasherFluid on page 10-23.

{ Warning

In freezing weather, do not usethe washer until the windshield iswarmed. Otherwise the washerfluid can form ice on thewindshield, blocking your vision.

Clear snow and ice from the wiperblades and windshield before usingthem. If frozen to the windshield,carefully loosen or thaw them.Damaged blades should bereplaced. See Wiper BladeReplacement on page 10-29.

Heavy snow or ice can overload thewiper motor.

Wipe Parking

If the ignition is turned to LOCK/OFF while the wipers are on LO, HI,or INT, they will immediately stop.

If the windshield wiper lever is thenmoved to off before the driver dooris opened or within 10 minutes, thewipers will restart and move to thebase of the windshield.

If the ignition is turned to LOCK/OFF while the wipers are performingwipes due to windshield washing,the wipers continue to run until theyreach the base of the windshield.

CompassThe vehicle may have a compassdisplay on the Driver InformationCenter (DIC). The compass receivesits heading and other informationfrom the Global PositioningSystem (GPS) antenna,StabiliTrak®, and vehicle speedinformation.

The compass system is designed tooperate for a certain number ofmiles or degrees of turn beforeneeding a signal from the GPSsatellites. When the compassdisplay shows CAL, drive thevehicle for a short distance in an

open area where it can receive aGPS signal. The compass systemwill automatically determine when aGPS signal is restored and providea heading again. See CompassMessages on page 5-40 for themessages that may be displayed forthe compass.

Clock

Setting the Time and Date

To set the time or date:

1. Select Settings from the HomePage, then select Time and DateSettings.

2. Select the desired function.

To set the time or date, press« orª to change the hour, minutes,AM, PM, day, month, or year.

To change the 12-24 Hr setting,press the 12-24 Hr button.

To turn Auto Set on and off, pressthe Auto Set button.



If auto timing is set, the timedisplayed on the clock may notupdate immediately when drivinginto a new time zone.

Press q BACK to go to the last

menu and save the changes or { toreturn to the Home Page.

Power OutletsThe accessory power outlet can beused to plug in electrical equipment,such as a cell phone or MP3 player.

There are two 12-volt accessorypower outlets:. On the center stack next to the

ashtray.. Inside the center console.

The outlet is powered when theignition is in ON/RUN or ACC/ACCESSORY, or until the driverdoor is opened within 10 minutes ofturning off the vehicle. See RetainedAccessory Power (RAP) onpage 9-24.

Open the protective cover to use theaccessory power outlet.

Certain electrical accessories maynot be compatible with theaccessory power outlet and couldoverload vehicle or adapter fuses.If there is a problem, see yourdealer.

When adding electrical equipment,be sure to follow the installationinstructions included with theequipment. See Add-On ElectricalEquipment on page 9-65.

{ Caution

Hanging heavy equipment fromthe power outlet can causedamage not covered by thevehicle warranty. The poweroutlets are designed foraccessory power plugs only, suchas cell phone charge cords.

Power Outlet 110 Volt AlternatingCurrent

If equipped, this power outlet is onthe rear of the center console. It canbe used to plug in electricalequipment with a maximum limit of150 watts.

An indicator light on the outletcomes on when in use. The lightcomes on when the ignition is inON/RUN, equipment requiring lessthan 150 watts is plugged into theoutlet, and no system fault isdetected.



The indicator light does not come onwhen the ignition is in LOCK/OFF orif the equipment is not fully seatedinto the outlet.

If you try to connect equipmentusing more than 150 watts or asystem fault is detected, theequipment may operate for a shortperiod and turn itself off.A protection circuit shuts off thepower supply and the indicator lightturns off. To reset the circuit, unplugthe item and plug it back in or turnthe Remote Accessory Power (RAP)off and then back on. See RetainedAccessory Power (RAP) onpage 9-24. Prolonged usage of thepower outlet at the maximum load of150 watts may cause the outlet tooverheat and automatically shutdown. The power restarts whenequipment that operates within thelimit is plugged into the outlet and asystem fault is not detected.

The power outlet is not designed forthe following equipment, and maynot work properly if any of thefollowing is plugged in:. Equipment with high initial peak

wattage such as:compressor-driven refrigeratorsand electric power tools.

. Other equipment requiring anextremely stable power supplysuch as:microcomputer-controlledelectric blankets, touch sensorlamps, etc.

Cigarette LighterIf equipped, push the lighter downand it will pop up when it is ready tobe used. The ignition switch mustbe in the ACC/ACCESSORY or ON/RUN position to use the lighter.

{ Caution

Holding a cigarette lighter in whileit is heating does not let thelighter back away from theheating element when it is hot.Damage from overheating canoccur to the lighter or heatingelement, or a fuse could beblown. Do not hold a cigarettelighter in while it is heating.

It is not recommended to use thecigarette lighter to plug in auxiliaryelectrical equipment.



Ashtrays

If equipped with an ashtray, it isunder the climate control system.Press the ashtray cover to open. Toempty, grasp both sides of theashtray and remove.

{ Caution

If papers, pins, or otherflammable items are put in theashtray, hot cigarettes or othersmoking materials could ignitethem and possibly damage thevehicle. Never put flammableitems in the ashtray.

Warning Lights,Gauges, andIndicatorsWarning lights and gauges cansignal that something is wrongbefore it becomes serious enoughto cause an expensive repair orreplacement. Paying attention to thewarning lights and gauges couldprevent injury.

Warning lights come on when therecould be a problem with a vehiclefunction. Some warning lights comeon briefly when the engine is startedto indicate they are working.



Gauges can indicate when therecould be a problem with a vehiclefunction. Often gauges and warninglights work together to indicate aproblem with the vehicle.

When one of the warning lightscomes on and stays on whiledriving, or when one of the gaugesshows there may be a problem,check the section that explains whatto do. Follow this manual's advice.Waiting to do repairs can be costlyand even dangerous.



Instrument Cluster (Base Cluster)

English Shown, Metric Similar



English eAssist Shown, Metric eAssist Similar



Cluster Menu

There is an interactive display areain the center of the instrumentcluster.

Use the right steering wheel controlto open and scroll through thedifferent items and displays.

Press S to access the cluster

applications. Usey orz to scrollthrough the list of availableapplications. Not all applications willbe available on all vehicles.

. Info App. This is where you canview the selected DriverInformation Center (DIC)displays. See Driver InformationCenter (DIC) (Base LevelCluster) on page 5-33 or DriverInformation Center (DIC)(Uplevel Cluster) on page 5-35.

. Audio

. Phone

. Navigation

. Settings

Audio

Press V to select the Audio app,

then press T to enter the Audiomenu. In the Audio menu browse formusic, select from the favorites,or change the audio source.

Phone

Press V to select the Phone app,

then press T to enter the Phonemenu. In the Phone menu, if there isno active phone call, view recentcalls, scroll through contacts,

or select from the favorites. If thereis an active call, mute or unmute thephone or switch to handset orhandsfree operation.

Navigation

Press V to select the Navigation

app, then press T to enter theNavigation menu. If there is noactive route, you can resume thelast route and turn the voiceprompts on/off. If there is an activeroute, press V to cancel routeguidance or turn the voice promptson/off.

Settings

Press V to select the Settings app,

then press T to enter the Settings

menu. Usey orz to scrollthrough items in the Settings menu.

Units: Press T while Units isdisplayed to enter the Units menu.Choose English or metric units bypressing V while the desired item ishighlighted.



Info Pages: Press T while InfoPages is displayed to enter the InfoPages menu and select the items tobe displayed in the Info App. SeeDriver Information Center (DIC)(Base Level Cluster) on page 5-33or Driver Information Center (DIC)(Uplevel Cluster) on page 5-35.

Speed Warning: The SpeedWarning display allows the driver toset a speed that they do not want toexceed. To set the Speed Warning,press T when Speed Warning is

displayed. Pressy orz to adjust

the value. Press V to set the speed.Once the speed is set, this featurecan be turned off by pressing Vwhile viewing this page. If theselected speed limit is exceeded, apop-up warning is displayed with achime.

Compass: In certain vehicles thecompass setting will allow formanually setting the compass. Theuser can set the zone and calibratethe compass. This setting page isonly available on vehicles that areequipped with Remote CompassModule.

Jump Start: The Jump Startdisplay is used to perform anon-board jump start for eAssistvehicles. See “Jump Starting(On-board with eAssist Only)” in theIndex.



Instrument Cluster (Uplevel Cluster)

English Shown, Metric Similar



Cluster Menu

Use the right steering wheel controlto open and scroll through thedifferent items and displays.

Press S to access the cluster

applications. Usey orz to scrollthrough the list of availableapplications. Not all applications willbe available on all vehicles.. Info App. This is where you can

view the selected DriverInformation Center (DIC)displays. See Driver InformationCenter (DIC) (Base LevelCluster) on page 5-33 or DriverInformation Center (DIC)(Uplevel Cluster) on page 5-35.

. Performance

. Audio

. Phone

. Navigation

. Settings

Performance

Press V to select the Performance

app, then press T to enter the

Performance menu. Usey orz toscroll through items in thePerformance menu.

Friction Bubble: A four quadrantvisual display, indicating the fourcorners of the car, with a “bubble”showing where the most inertia isbeing exerted on the vehicle.

Accel and Brake: Displaysthe percentage amount of brake oraccelerator pressure applied by thedriver as a bar graph around theouter perimeter of the DIC area. Theleft side is for acceleration and theright side is for braking.

Oil Temperature: Displays the oiltemperature in degrees Celsius ordegrees Fahrenheit.

Oil Pressure: Displays the oilpressure in kPa or psi.

Battery Voltage: Displays thebattery voltage.

Transmission FluidTemperature: Displays thetransmission fluid temperature indegrees Celsius or degreesFahrenheit.



Audio

Press V to select the Audio app,

then press T to enter the Audiomenu. In the Audio menu browse formusic, select from the favorites,or change the audio source.

Phone

Press V to select the Phone app,

then press T to enter the Phonemenu. In the Phone menu, if there isno active phone call, view recentcalls, scroll through contacts,or select from the favorites. If thereis an active call, mute or unmute thephone or switch to handset orhandsfree operation.

Navigation

Press V to select the Navigation

app, then press T to enter theNavigation menu. If there is noactive route, you can resume thelast route and turn the voiceprompts on/off. If there is an active

route, press V to cancel routeguidance or turn the voice promptson/off.

Settings

Press V to select the Settings app,

then press T to enter the Settings

menu. Usey orz to scrollthrough items in the Settings menu.

Units: Press T while Units isdisplayed to enter the Units menu.Choose English or metric units bypressing V while the desired item ishighlighted.

Display Themes: Press T whileDisplay Themes is displayed toenter the menu. Choose Sport orTouring by pressing V while thedesired item is highlighted.

Info Pages: Press T while InfoPages is displayed to enter the InfoPages menu and select the items tobe displayed in the Info App. SeeDriver Information Center (DIC)(Base Level Cluster) on page 5-33or Driver Information Center (DIC)(Uplevel Cluster) on page 5-35.

Speed Warning: The SpeedWarning display allows the driver toset a speed that they do not want toexceed. To set the Speed Warning,press T when Speed Warning is

displayed. Pressy orz to adjust

the value. Press V to set the speed.Once the speed is set, this featurecan be turned off by pressing Vwhile viewing this page. If theselected speed limit is exceeded, apop-up warning is displayed with achime.

Software Information: Displaysthe open source softwareinformation.



Compass: In certain vehicles thecompass setting will allow formanually setting the compass. Theuser can set the zone and calibratethe compass. This setting page isonly available on vehicles that areequipped with Remote CompassModule.

SpeedometerThe speedometer shows thevehicle's speed in either kilometersper hour (km/h) or miles perhour (mph).

OdometerThe odometer shows how far thevehicle has been driven, in eitherkilometers or miles.

This vehicle has a tamper‐resistantodometer. The digital odometer willread 999,999 if it is turned back.

If the vehicle needs a new odometerinstalled, it must be set to themileage total of the old odometer.If that is not possible, then it must

be set at zero and a label must beput on the driver door to show theold mileage reading when the newodometer was installed.

Trip OdometerThe trip odometer can show how farthe vehicle has been driven sincethe trip odometer was last reset.

The trip odometer is accessed andreset through the Driver InformationCenter (DIC). See DriverInformation Center (DIC) (BaseLevel Cluster) on page 5-33 orDriver Information Center (DIC)(Uplevel Cluster) on page 5-35.

TachometerThe tachometer displays the enginespeed in revolutions perminute (rpm).

For eAssist vehicles, when theignition is in ON/RUN, thetachometer indicates the vehiclestatus. When pointing to AUTOSTOP, the engine is off but the

vehicle is on and can move. Theengine could auto start at any time.When the indicator points to OFF,the vehicle is off.

When the engine is on, thetachometer will indicate the engine’srevolutions per minute (rpm). Thetachometer may vary by severalhundred rpm’s, during auto stopmode, when the engine is shuttingoff and restarting.

A slight bump may be felt when thetransmission is determining themost fuel efficient operating range.



Fuel Gauge

Base Level Metric

Uplevel Metric

Base Level English

Uplevel English

When the ignition is on, the fuelgauge shows about how much fuelis left in the tank.

An arrow on the fuel gaugeindicates the side of the vehicle thefuel door is on.

When the vehicle's fuel levelbecomes low, a message appearsin the Driver Information Center(DIC) and a single chime sounds.See Fuel System Messages onpage 5-42 for more information.

Here are four things that someowners ask about. None of theseshow a problem with the fuel gauge:. At the service station, the fuel

pump shuts off before the gaugereads full.

. It takes a little more or less fuelto fill up than the gaugeindicated. For example, thegauge may have indicated thetank was half full, but it actuallytook a little more or less thanhalf the tank's capacity to fillthe tank.



. The gauge moves a little whileturning a corner or speeding up.

. The gauge takes a few secondsto stabilize after the ignition isturned on, and will go back toempty when the ignition isturned off.

Engine CoolantTemperature Gauge

Base Level Metric

Uplevel Metric

Base Level English



Uplevel English

This gauge shows the enginecoolant temperature.

If the indicator needle moves to thehot side of the gauge toward theshaded area, the engine is too hot.

In eAssist vehicles, the enginecoolant warning light will come onwhen the engine is too hot. SeeEngine Coolant TemperatureWarning Light on page 5-28 formore information.

If the vehicle has been operatedunder normal driving conditions, pulloff the road, stop the vehicle, andturn off the engine as soon aspossible.

Safety Belt Reminders

Driver Safety Belt ReminderLight

There is a driver safety beltreminder light on the instrumentcluster.

When the vehicle is started, thislight flashes and a chime may comeon to remind the driver to fastentheir safety belt. Then the light stayson solid until the belt is buckled.This cycle may continue several

times if the driver remains orbecomes unbuckled while thevehicle is moving.

If the driver safety belt is buckled,neither the light nor the chimecomes on.

Passenger Safety BeltReminder Light

There is a passenger safety beltreminder light near the passengerairbag status indicator. SeePassenger Sensing System onpage 3-24.

When the vehicle is started, thislight flashes and a chime may comeon to remind passengers to fastentheir safety belt. Then the light stayson solid until the belt is buckled.This cycle continues several times if



the passenger remains or becomesunbuckled while the vehicle ismoving.

If the passenger safety belt isbuckled, neither the chime nor thelight comes on.

The front passenger safety beltwarning light and chime may turn onif an object is put on the seat suchas a briefcase, handbag, grocerybag, laptop, or other electronicdevice. To turn off the warning lightand/or chime, remove the objectfrom the seat or buckle thesafety belt.

Airbag Readiness LightThis light shows if there is anelectrical problem with the airbagsystem. The system check includesthe airbag sensor(s), passengersensing system, the pretensioners,the airbag modules, the wiring, andthe crash sensing and diagnosticmodule. For more information on theairbag system, see Airbag Systemon page 3-19.

The airbag readiness light comes onfor several seconds when thevehicle is started. If the light doesnot come on then, have it fixedimmediately.

{ Warning

If the airbag readiness light stayson after the vehicle is started orcomes on while driving, it meansthe airbag system might not beworking properly. The airbags inthe vehicle might not inflate in acrash, or they could even inflatewithout a crash. To help avoidinjury, have the vehicle servicedright away.

Passenger Airbag StatusIndicatorThe vehicle has a passengersensing system. See PassengerSensing System on page 3-24 forimportant safety information. Theinstrument panel has a passengerairbag status indicator.

When the vehicle is started, thepassenger airbag status indicatorwill light ON and OFF for severalseconds as a system check. Then,after several more seconds, thestatus indicator will light either ONor OFF to let you know the status ofthe front outboard passenger frontalairbag.



If the word ON is lit on thepassenger airbag status indicator, itmeans that the front outboardpassenger frontal airbag is allowedto inflate.

If the word OFF is lit on the airbagstatus indicator, it means that thepassenger sensing system hasturned off the front outboardpassenger frontal airbag.

If, after several seconds, both statusindicator lights remain on, or if thereare no lights at all, there may be aproblem with the lights or thepassenger sensing system. Seeyour dealer for service.

{ Warning

If the airbag readiness light evercomes on and stays on, it meansthat something may be wrongwith the airbag system. To helpavoid injury to yourself or others,have the vehicle serviced rightaway. See Airbag ReadinessLight on page 5-20 for moreinformation, including importantsafety information.

Charging System Light

The charging system light comes onbriefly when the ignition is turnedon, but the engine is not running, asa check to show the light is working.

The light turns off when the engineis started. If it does not, have thevehicle serviced by your dealer.

If the light stays on, or comes onwhile driving, there could be aproblem with the electrical chargingsystem. Have it checked by yourdealer. Driving while this light is oncould drain the battery.

If a short distance must be drivenwith the light on, be sure to turn offall accessories, such as the radioand air conditioner.

MalfunctionIndicator LampA computer system called OBD II(On-Board Diagnostics-SecondGeneration) monitors the operationof the vehicle to ensure emissionsare at acceptable levels, helping tomaintain a clean environment. Themalfunction indicator lamp comeson when the vehicle is placed inON/RUN for Key Access or ServiceOnly Mode for Keyless Access, as acheck to show it is working. If it



does not, have the vehicle servicedby your dealer. See IgnitionPositions (Key Access) onpage 9-15 or Ignition Positions(Keyless Access) on page 9-17 formore information.

If the malfunction indicator lampcomes on while the engine isrunning, this indicates that the OBDII system has detected a problemand diagnosis and service might berequired.

Malfunctions often are indicated bythe system before any problem isapparent. Being aware of the lightcan prevent more serious damageto the vehicle. This system alsoassists the dealer technician incorrectly diagnosing anymalfunction.

{ Caution

If the vehicle is continually drivenwith this light on, the emissioncontrols might not work as well,the vehicle fuel economy mightnot be as good, and the enginemight not run as smoothly. Thiscould lead to costly repairs thatmight not be covered by thevehicle warranty.

{ Caution

Modifications made to the engine,transmission, exhaust, intake,or fuel system of the vehicle orthe replacement of the originaltires with other than those of thesame Tire Performance Criteria(TPC) can affect the vehicle'semission controls and can causethis light to come on.Modifications to these systems

(Continued)

Caution (Continued)

could lead to costly repairs notcovered by the vehicle warranty.This could also result in a failureto pass a required EmissionInspection/Maintenance test. SeeAccessories and Modifications onpage 10-3.

This light comes on during amalfunction in one of two ways:

Light Flashing: A misfire conditionhas been detected. A misfireincreases vehicle emissions andcould damage the emission controlsystem on the vehicle. Diagnosisand service might be required.

To prevent more serious damage tothe vehicle:. Reduce vehicle speed.. Avoid hard accelerations.. Avoid steep uphill grades.



If the light continues to flash, find asafe place to stop and park thevehicle. Turn the vehicle off, wait atleast 10 seconds, and restart theengine. If the light is still flashing,follow the previous steps and seeyour dealer for service as soon aspossible.

Light On Steady: An emissioncontrol system malfunction hasbeen detected on the vehicle.Diagnosis and service might berequired.

The following may correct anemission control systemmalfunction:. Check that the fuel cap is fully

installed. See Filling the Tank onpage 9-63. The diagnosticsystem can determine if the fuelcap has been left off orimproperly installed. A loose ormissing fuel cap allows fuel toevaporate into the atmosphere.A few driving trips with the capproperly installed should turn thelight off.

. Check that good quality fuel isused. Poor fuel quality causesthe engine not to run asefficiently as designed and maycause stalling after start-up,stalling when the vehicle ischanged into gear, misfiring,hesitation on acceleration,or stumbling on acceleration.These conditions might go awayonce the engine is warmed up.

If one or more of these conditionsoccurs, change the fuel brand used.It may require at least one full tankof the proper fuel to turn the light off.

See Recommended Fuel onpage 9-60.

If none of the above have made thelight turn off, your dealer can checkthe vehicle. The dealer has theproper test equipment anddiagnostic tools to fix anymechanical or electrical problemsthat might have developed.

Emissions Inspection andMaintenance Programs

Depending on where you live, yourvehicle may be required toparticipate in an emission controlsystem inspection and maintenanceprogram. For the inspection, theemission system test equipment willlikely connect to the vehicle's DataLink Connector (DLC).

The DLC is under the instrumentpanel next to the steering wheel.See your dealer if assistance isneeded.

The vehicle may not passinspection if:. The malfunction indicator lamp is

on while the engine is running,or the malfunction indicator lamp



is not on while the vehicle is inON/RUN or Service Only Mode.See your dealer for assistance inverifying proper operation of themalfunction indicator lamp.

. The OBD II (On-BoardDiagnostics) system determinesthat critical emission controlsystems have not beencompletely diagnosed by thesystem. If this were to occur, thevehicle would be considered notready for inspection. This canhappen if the 12-volt battery hasrecently been replaced orrun down.

The diagnostic system isdesigned to evaluate criticalemission control systems duringnormal driving. This can takeseveral days of driving. If thishas been done and the vehiclestill does not pass the inspectionfor lack of OBD II systemreadiness, your dealer canprepare the vehicle forinspection.

Brake System WarningLightThe vehicle brake system consistsof two hydraulic circuits. If onecircuit is not working, the remainingcircuit can still work to stop thevehicle. For normal brakingperformance, both circuits need tobe working.

If the warning light comes on, thereis a brake problem. Have the brakesystem inspected right away.

Metric English

This light comes on briefly when thevehicle is turned on. If it does notcome on then, have it fixed so it willbe ready to warn if there is aproblem.

If the light comes on and stays on,there is a base brake problem.

{ Warning

The brake system might not beworking properly if the brakesystem warning light is on.Driving with the brake systemwarning light on can lead to acrash. If the light is still on afterthe vehicle has been pulled offthe road and carefully stopped,have the vehicle towed forservice.

Electric Parking BrakeLight

Metric English

The parking brake status lightcomes on when the brake isapplied. If the light continues



flashing after the parking brake isreleased, or while driving, there is aproblem with the electric parkingbrake system. A message may alsodisplay on the Driver InformationCenter (DIC). See Brake SystemMessages on page 5-39 for moreinformation.

If the light does not come on,or remains flashing, see your dealer.

Service Electric ParkingBrake Light

This light should come on brieflywhen starting the vehicle. If it doesnot come on, have it fixed so it willbe ready to warn if there is aproblem.

If this light stays on, there is aproblem with the Electric ParkingBrake system or another system onthe vehicle that is causing theparking brake system to work at areduced level. The vehicle can stillbe driven, but should be taken to adealer as soon as possible. See theinformation for the Electric ParkingBrake under Parking Brake onpage 9-33. If a message displays inthe Driver Information Center (DIC),see Brake System Messages onpage 5-39.

Antilock Brake System(ABS) Warning Light

The Antilock Brake System (ABS)light comes on briefly when theengine is started.

If the light does not come on, have itfixed so it will be ready to warn ifthere is a problem.

If the ABS light stays on, turn theignition off. If the light comes onwhile driving, stop as soon as it issafely possible and turn the ignitionoff. A chime may also sound whenthe light comes on steady. Thenstart the engine again to reset thesystem. If the ABS light stays on,or comes on again while driving, thevehicle needs service. If the regularbrake system warning light is noton, the vehicle still has brakes, butnot antilock brakes. If the regularbrake system warning light is alsoon, the vehicle does not haveantilock brakes and there is aproblem with the regular brakes.See Brake System Warning Light onpage 5-24.

See Brake System Messages onpage 5-39 for all brake related DICmessages.



Up-Shift Light

For manual transmission vehicles,there is an up-shift light that comeson in the lower DIC area. It showswhen to shift to the next higher gearfor best fuel economy.

See Manual Transmission onpage 9-30.

Lane Departure Warning(LDW) Light

For some vehicles with the LaneDeparture Warning (LDW) system,this light briefly comes on amberwhile starting the vehicle. If it doesnot, have the vehicle serviced byyour dealer. If the system is workingnormally, the indicator light thenturns off. For vehicles with theuplevel cluster, this light may notcome on when starting the vehicle.

This light comes on green when thesystem is on and ready to operate.When the system determines thatthe vehicle is leaving its lanewithout using the turn signal, thislight will change to amber and flash.

See Lane Departure Warning (LDW)on page 9-58.

Vehicle Ahead Indicator

If equipped, this light in the DriverInformation Center (DIC) displaysgreen when a vehicle is detectedahead.

This light will display amber whenyou are following a vehicle aheadmuch too closely.

See Forward Collision Alert (FCA)System on page 9-52.



Traction Off Light

This light comes on briefly whilestarting the engine. If it does not,have the vehicle serviced by yourdealer. If the system is workingnormally, the indicator light thenturns off.

The traction off light comes on whenthe Traction Control System (TCS)has been turned off by pressing andreleasing the TCS/StabiliTrakbutton.

This light and the StabiliTrak OFFlight come on when StabiliTrak isturned off.

If the TCS is off, wheel spin is notlimited. Adjust driving accordingly.


StabiliTrak® OFF Light

This light comes on briefly whilestarting the engine. If it does not,have the vehicle serviced by yourdealer.

This light comes on when theStabiliTrak system is turned off.If StabiliTrak is off, the TractionControl System (TCS) is also off.

If the StabiliTrak and TCS are off,the system does not assist incontrolling the vehicle. Turn on theTCS and the StabiliTrak systemsand the warning light turns off.


Traction Control System(TCS)/StabiliTrak® Light

This light comes on briefly when theengine is started.

If the light does not come on, havethe vehicle serviced by your dealer.If the system is working normally,the indicator light turns off.

If the light is on and not flashing, theTCS, and potentially the StabiliTraksystem have been disabled. A DICmessage may display. Check theDIC messages to determine whichfeature(s) is no longer functioningand whether the vehicle requiresservice.



If the indicator/warning light is onand flashing, the TCS and/or theStabiliTrak system is activelyworking.


Engine CoolantTemperature WarningLight

This light comes on briefly whilestarting the vehicle.

If it does not, have the vehicleserviced by the dealer. If the systemis working normally the indicatorlight goes off.

{ Caution

The engine coolant temperaturewarning light indicates that thevehicle has overheated. Drivingwith this light on can damage theengine and it may not be coveredby the vehicle warranty. SeeEngine Overheating onpage 10-22.

The engine coolant temperaturewarning light comes on when theengine has overheated.

If this happens, pull over and turnoff the engine as soon as possible.See Engine Overheating onpage 10-22.

Tire Pressure Light

For vehicles with the Tire PressureMonitor System (TPMS), this lightcomes on briefly when the engine isstarted. It provides informationabout tire pressures and the TPMS.

When the Light Is On Steady

This indicates that one or more ofthe tires are significantlyunderinflated.

A Driver Information Center (DIC)tire pressure message may alsodisplay. See Tire Messages onpage 5-46. Stop as soon aspossible, and inflate the tires to thepressure value shown on the Tireand Loading Information label. SeeTire Pressure on page 10-48.



When the Light Flashes First andThen Is On Steady

If the light flashes for about a minuteand then stays on, there may be aproblem with the TPMS. If theproblem is not corrected, the lightwill come on at every ignition cycle.See Tire Pressure MonitorOperation on page 10-51.

Engine Oil Pressure Light

{ Caution

Lack of proper engine oilmaintenance can damage theengine. Driving with the engineoil low can also damage theengine. The repairs would not becovered by the vehicle warranty.Check the oil level as soon aspossible. Add oil if required, but ifthe oil level is within the operatingrange and the oil pressure is stilllow, have the vehicle serviced.Always follow the maintenanceschedule for changing engine oil.

This light should come on briefly asthe engine is started. If it does notcome on, have the vehicle servicedby your dealer.

If the light comes on and stays on, itmeans that oil is not flowing throughthe engine properly. The vehiclecould be low on oil and might havesome other system problem. Seeyour dealer.

Low Fuel Warning Light

This light is near the fuel gauge andcomes on briefly when the ignition isturned on as a check to show it isworking.

It also comes on when the fuel tankis low on fuel. The light turns offwhen fuel is added. If it does not,have the vehicle serviced.



Security Light

The security light should come onbriefly as the engine is started. If itdoes not come on, have the vehicleserviced by your dealer. If thesystem is working normally, theindicator light turns off.

If the light stays on and the enginedoes not start, there could be aproblem with the theft-deterrentsystem. See Immobilizer Operation(Key Access) on page 2-17 orImmobilizer Operation (KeylessAccess) on page 2-18.

High-Beam On Light

The high‐beam on light comes onwhen the high-beam headlamps arein use.

See Headlamp High/Low-BeamChanger on page 6-1 for moreinformation.

Front Fog Lamp Light

For vehicles with fog lamps, thislight comes on when the fog lampsare on.

The light goes out when the foglamps are turned off. See FogLamps on page 6-4 for moreinformation.

Lamps On Reminder

For vehicles with the lamps onreminder light, it comes on when thelights are in use.



Cruise Control Light

The cruise control light is whitewhen the cruise control is on andready, and turns green when thecruise control is set and active.

See Cruise Control on page 9-39.

Adaptive Cruise Control Light

This light is white when the AdaptiveCruise Control (ACC, if equipped) ison and ready, and turns green when

the ACC is set and active. SeeAdaptive Cruise Control onpage 9-41.

Door Ajar Light

When the ignition is on, this lightstays on until all doors are closedand completely latched.

If a door is not closed properly, achime sounds after the engine isstarted and the vehicle is not inP (Park).

Information Displays

Power Flows(eAssist Only)To view the Power Flow screens inthe center stack display, press the[ button on the Home screen oron the Application Tray on the top ofthe infotainment system touchscreen. Then press the Flow buttonat the bottom of the touch screen.These screens indicate the currentoperating condition and the energyflow between the engine, generator,and high voltage battery.



Auto Stop – Vehicle is stationarywith battery active and no power isflowing to the wheels.

Engine Power – Engine is activewith energy flowing to the wheels.

Engine Idle – Vehicle is stationarywith engine active and no power isflowing to the wheels.

Regen Recovery – Power from thewheels returns to the battery duringregenerative braking or coasting.

Hybrid Power – Both the engine andbattery are active with energyflowing to the wheels.

Power Off – No power is flowing tothe wheels.



Energy Information(eAssist Only)To view the Efficiency Tips screenon the center stack display, pressthe[ button on the Home screenor on the Application Tray on the topof the infotainment system touchscreen. Then press the Tips buttonat the bottom of the touch screen.

Efficiency Tips

The Efficiency Tips screen providesa guide on how to improve energyusage to increase fuel economy.

Driver Information Center(DIC) (Base Level Cluster)The DIC displays are shown in thecenter of the instrument cluster inthe Info App. See Instrument Cluster(Base Cluster) on page 5-9 orInstrument Cluster (Uplevel Cluster)on page 5-13. The Info App is onlyavailable when the vehicle is inON/RUN. The displays show the

status of many vehicle systems. Thecontrols for the DIC are on the rightsteering wheel control.



V (Set/Reset): Press to open amenu or select a menu item. Pressand hold to reset values on certainscreens.

DIC Info Page Options

The info pages on the DIC can beturned on or off through theSettings app.

1. Press S to access the clusterapplications.

2. Pressy orz to scroll to theSettings application.

3. Press V to select the Settings

app, then press T to enter theSettings menu.

4. Pressy orz to scroll to Info

Pages and press T.

5. Select Edit List or press T.

6. Pressy orz to move throughthe list of possible informationdisplays.

7. Press V while an item ishighlighted to select or deselectthat item. When an item isselected, a checkmark willappear next to it.



DIC Info Pages

The following is the list of allpossible DIC info page displays.Some may not be available for yourparticular vehicle. Some items maynot be turned on by default but canbe turned on through the Settingsapp. See “DIC Info Page Options”earlier in this section.

Current Speed: Displays thevehicle speed in either kilometersper hour (km/h) or miles perhour (mph).

Trip A and Average Fuel Economyor Trip B and Average FuelEconomy: The Trip display showsthe current distance traveled, ineither kilometers (km) or miles (mi),since the trip odometer was lastreset. The trip odometer can bereset by pressing and holding Vwhile this display is active.

The Average Fuel Economy displayshows the approximate averageliters per 100 kilometers (L/100 km)or miles per gallon (mpg). This

number is calculated based on thenumber of L/100 km (mpg) recordedsince the last time this menu itemwas reset. The Average FuelEconomy can be reset by pressingand holding V while this display isactive.

Fuel Range: Displays theapproximate distance the vehiclecan be driven without refueling.LOW will be displayed when thevehicle is low on fuel. The fuelrange estimate is based on anaverage of the vehicle's fueleconomy over recent driving historyand the amount of fuel remaining inthe fuel tank.

Instantaneous Fuel Economy:Displays the current fuel economyin either liters per 100 kilometers(L/100 km) or miles pergallon (mpg). This number reflectsonly the fuel economy that thevehicle has right now and changesfrequently as driving conditionschange.

Average Speed: Displays theaverage speed of the vehicle inkilometers per hour (km/h) or milesper hour (mph). This average iscalculated based on the variousvehicle speeds recorded since thelast reset of this value. The averagespeed can be reset by pressing andholding V while this display isactive.

Timer: To start the timer, press Vwhile this display is active. Thedisplay will show the amount of timethat has passed since the timer waslast reset. To stop the timer, press Vbriefly while this display is activeand the timer is running. To resetthe timer to zero, press and hold Vwhile this display is active.

Oil Life: Displays an estimate ofthe oil's remaining useful life.If REMAINING OIL LIFE 99% isdisplayed, that means 99% of thecurrent oil life remains.



When the remaining oil life is low,the CHANGE ENGINE OIL SOONmessage will appear on the display.See Engine Oil Messages onpage 5-42. The oil should bechanged as soon as possible. SeeEngine Oil on page 10-11. Inaddition to the engine oil life systemmonitoring the oil life, additionalmaintenance is recommended in theMaintenance Schedule. SeeMaintenance Schedule onpage 11-2.

The Oil Life display must be resetafter each oil change. It will notreset itself. Do not reset the Oil Lifedisplay accidentally at any timeother than when the oil has justbeen changed. It cannot be resetaccurately until the next oil change.To reset the engine oil life system,press and hold V for severalseconds while the Oil Life display isactive. See Engine Oil Life Systemon page 10-13.

Coolant Temperature: Displaysthe coolant temperature in eitherdegrees Celsius (°C) or degreesFahrenheit (°F).

Tire Pressure: Displays theapproximate pressures of all fourtires. Tire pressure is displayed ineither kilopascal (kPa) or in poundsper square inch (psi). If the pressureis low, the value for that tire isshown in amber. See Tire PressureMonitor System on page 10-50 andTire Pressure Monitor Operation onpage 10-51.

Battery Voltage: Displays thecurrent battery voltage. The batteryvoltage can fluctuate while viewingthis information on the DIC. This isnormal.

Speed Signs: Displays signinformation, which comes from aroadway database in the onboardnavigation.

Following Distance/Gap Setting:Used to select the alert timing forthe Forward Collision Alert (FCA)and the gap for the Adaptive Cruise

Control (ACC). See ForwardCollision Alert (FCA) System onpage 9-52 and Adaptive CruiseControl on page 9-41.

Drive Cycle Info (eAssist Only):Shows the distance and fueleconomy for the current drive cycle.

Driver Information Center(DIC) (Uplevel Cluster)The DIC displays are shown in thecenter of the instrument cluster inthe Info App. See Instrument Cluster(Base Cluster) on page 5-9 orInstrument Cluster (Uplevel Cluster)on page 5-13. The Info App is onlyavailable when the vehicle is in ON/RUN. The displays show the statusof many vehicle systems. Thecontrols for the DIC are on the rightsteering wheel control.





V (Set/Reset): Press to open amenu or select a menu item. Pressand hold to reset values on certainscreens.

DIC Info Page Options

The info pages on the DIC can beturned on or off through theSettings app.

1. Press S to access the clusterapplications.

2. Pressy orz to scroll to theSettings application.

3. Press V to select theSettings app.

4. Pressy orz to scroll to Info

Pages and press T.

5. Select Edit List or press T.

6. Pressy orz to move throughthe list of possible informationdisplays.

7. Press V while an item ishighlighted to select or deselectthat item. When an item isselected, a checkmark willappear next to it.

DIC Info Pages

The following is the list of allpossible DIC info page displays.Some may not be available for yourparticular vehicle. Some items maynot be turned on by default but canbe turned on through the Settingsapp. See “DIC Info Page Options”earlier in this section.

Speed (Sport Theme Only):Displays the vehicle speed in eitherkilometers per hour (km/h) or milesper hour (mph).

Trip A or Trip B with Average FuelEconomy and Average Speed:The Trip display shows the currentdistance traveled, in eitherkilometers (km) or miles (mi), sincethe trip odometer was last reset.The trip odometer can be reset bypressing and holding V while this

display is active, or by pressing Tand resetting through theright menu.



The Average Fuel Economy displayshows the approximate averageliters per 100 kilometers (L/100 km)or miles per gallon (mpg). Thisnumber is calculated based on thenumber of L/100 km (mpg) recordedsince the last time this menu itemwas reset. The Average FuelEconomy can be reset by pressingand holding V while this display is

active, or by pressing T andresetting through the right menu.

The Average Speed display showsthe average speed of the vehicle inkilometers per hour (km/h) or milesper hour (mph). This average iscalculated based on the variousvehicle speeds recorded since thelast reset of this value. The averagespeed can be reset by pressing andholding V while this display is

active, or by pressing T andresetting through the right menu.

Fuel Range and InstantaneousFuel Economy: Displays theapproximate distance the vehiclecan be driven without refueling.

LOW will be displayed when thevehicle is low on fuel. The fuelrange estimate is based on anaverage of the vehicle's fueleconomy over recent driving historyand the amount of fuel remaining inthe fuel tank.

Displays the current fuel economy ineither liters per 100 kilometers(L/100 km) or miles pergallon (mpg). This number reflectsonly the fuel economy that thevehicle has right now and changesfrequently as driving conditionschange.

Oil Life: Displays an estimate ofthe oil's remaining useful life.If REMAINING OIL LIFE 99% isdisplayed, that means 99% of thecurrent oil life remains.

When the remaining oil life is low,the CHANGE ENGINE OIL SOONmessage will appear on the display.See Engine Oil Messages onpage 5-42. The oil should bechanged as soon as possible. SeeEngine Oil on page 10-11. In

addition to the engine oil life systemmonitoring the oil life, additionalmaintenance is recommended in theMaintenance Schedule. SeeMaintenance Schedule onpage 11-2.

The Oil Life display must be resetafter each oil change. It will notreset itself. Do not reset the Oil Lifedisplay accidentally at any timeother than when the oil has justbeen changed. It cannot be resetaccurately until the next oil change.To reset the engine oil life system,press and hold V for severalseconds while the Oil Life display isactive. See Engine Oil Life Systemon page 10-13.

Tire Pressure: Displays theapproximate pressures of all fourtires. Tire pressure is displayed ineither kilopascal (kPa) or in poundsper square inch (psi). If the pressure



is low, the value for that tire isshown in amber. See Tire PressureMonitor System on page 10-50 andTire Pressure Monitor Operation onpage 10-51.

Fuel Economy: The right handside displays the best average fueleconomy (AFE) that is achieved fora selected distance. The left handside displays a running average offuel economy for the most recentlytraveled selected distance. Thecenter bar graph displays theinstantaneous fuel economy. Pressthe T button to display a page forselecting one of the distanceoptions. Move the up/down arrow tochoose the selection, and V tochange the setting. When viewingbest AFE, a several second pressand hold of V will reset the bestvalue. The best value will show “- --“ until the selected distance hasbeen traveled. The display providesfeedback on how current drivingbehavior in the bar graph affects therunning average in the left display

and how well recent drivingcompares to the best that has beenachieved.

Fuel Used and Timer: Displaysthe approximate liters (L) orgallons (gal) of fuel that have beenused since last reset. The fuel usedcan be reset by pressing the Tbutton while the Fuel Used displayis showing.

To start the timer, press V while thisdisplay is active. The display willshow the amount of time that haspassed since the timer was lastreset. To stop the timer, press Vbriefly while this display is activeand the timer is running. To resetthe timer to zero, press T while thisdisplay is active.

Speed Limit: Displays signinformation, which comes from aroadway database in the onboardnavigation.

Following Distance/Gap Setting:Used to select the alert timing forthe Forward Collision Alert (FCA)and the gap for the Adaptive CruiseControl (ACC). See ForwardCollision Alert (FCA) System onpage 9-52 and Adaptive CruiseControl on page 9-41.



Vehicle MessagesMessages displayed on the DICindicate the status of the vehicle orsome action that may be needed tocorrect a condition. Multiplemessages may appear one afteranother.

The messages that do not requireimmediate action can beacknowledged and cleared bypressing V (Set/Reset).

The messages that requireimmediate action cannot be cleareduntil that action is performed.

All messages should be takenseriously; clearing the messagedoes not correct the problem.

The following are the possiblemessages and some informationabout them.

Battery Voltage andCharging Messages

BATTERY SAVER ACTIVE

This message displays when thevehicle has detected that the batteryvoltage is dropping beyond areasonable point. The battery saversystem starts reducing features ofthe vehicle that may be noticed. Atthe point that features are disabled,this message displays. Turn offunnecessary accessories to allowthe battery to recharge.

LOW BATTERY

This message is displayed when thebattery voltage is low. See Batteryon page 10-27.

SERVICE BATTERYCHARGING SYSTEM

This message is displayed whenthere is a fault in the batterycharging system. Take the vehicle toyour dealer for service.

Brake System Messages

BRAKE FLUID LOW

This message is displayed when thebrake fluid level is low. See BrakeFluid on page 10-25.

STEP ON BRAKE TORELEASE PARK BRAKE

This message is displayed if youattempt to release the electricparking brake without the brakepedal applied. See Parking Brakeon page 9-33 for more information.

RELEASE PARK BRAKESWITCH

This message is displayed if theelectric parking brake is on while thevehicle is in motion. Release itbefore you attempt to drive. SeeParking Brake on page 9-33 formore information.

SERVICE BRAKE ASSIST

This message may be displayedwhen there is a problem with thebrake boost assist system. When



this message is displayed, the brakeboost assist motor might be heardoperating and you might noticepulsation in the brake pedal. This isnormal under these conditions. Takethe vehicle to your dealer forservice.

SERVICE PARKING BRAKE

This message is displayed whenthere is a problem with the electricparking brake. See Parking Brakeon page 9-33 for more information.Take the vehicle to your dealer.

Compass Messages

CAL

This message is displayed when thecompass needs to be calibrated.See Compass on page 5-4.

– –

Dashes will be displayed if thecompass needs service. See yourdealer for service.

Cruise Control Messages

ADAPTIVE CRUISE SETTO XXX

This message displays when theAdaptive Cruise Control (ACC)speed is set. See Adaptive CruiseControl on page 9-41.

ADAPTIVE CRUISETEMPORARILY UNAVAILABLE

This message displays whenattempting to activate AdaptiveCruise Control (ACC) when it istemporarily unavailable. The ACCsystem does not need service.

This can occur under the followingconditions:. The radar is not clean. Keep the

radar sensors free of mud, dirt,snow, ice, and slush. Clean theentire front and/or rear of thevehicle. For cleaninginstructions, see Exterior Careon page 10-86.

. Heavy rain or snow is interferingwith the radar object detection orcamera performance.

CRUISE SET TO XXX

This message displays when thecruise control speed is set. SeeCruise Control on page 9-39.

NO CRUISE BRAKING GASPEDAL APPLIED

This message displays whenAdaptive Cruise Control (ACC) isactive and the driver is pressing thegas pedal. When this occurs, ACCwill not brake. See Adaptive CruiseControl on page 9-41.

SERVICE ADAPTIVE CRUISECONTROL

This message displays when theAdaptive Cruise Control (ACC)needs service. Take the vehicle toyour dealer.



SHIFT TO PARK BEFOREEXITING

This message may display ifAdaptive Cruise Control (ACC) isengaged holding the vehicle at astop, and the driver attempts to exitthe vehicle. Put the vehicle inP (Park) before exiting.

Door Ajar Messages

DRIVER DOOR OPEN

This message will display when thedriver door is open. Close the doorcompletely.

HOOD OPEN

This message will display when thehood is open. Close the hoodcompletely.

LEFT REAR DOOR OPEN

This message will display when thedriver side rear door is open. Closethe door completely.

PASSENGER DOOR OPEN

This message will display when thefront passenger door is open. Closethe door completely.

RIGHT REAR DOOR OPEN

This message will display when thepassenger side rear door is open.Close the door completely.

TRUNK OPEN

This message will display when thetrunk is open. Close the trunkcompletely.

Engine Cooling SystemMessages

A/C OFF DUE TO HIGHENGINE TEMP

This message displays when theengine coolant becomes hotter thanthe normal operating temperature.To avoid added strain on a hotengine, the air conditioningcompressor automatically turns off.When the coolant temperature

returns to normal, the airconditioning compressor turns backon. The vehicle can continue to bedriven.

If this message continues to appear,have the system repaired by yourdealer as soon as possible to avoiddamage to the engine.

COOLANT LEVEL LOW ADDCOOLANT

This message will display if thecoolant is low. See Engine Coolanton page 10-19.

ENGINE OVERHEATED —IDLE ENGINE

This message displays when theengine coolant temperature is toohot. Stop and allow the vehicle toidle until it cools down.

ENGINE OVERHEATED —STOP ENGINE

This message displays and acontinuous chime sounds if theengine cooling system reachesunsafe temperatures for operation.



Stop and turn off the vehicle assoon as it is safe to do so to avoidsevere damage. This messageclears when the engine has cooledto a safe operating temperature.

HIGH COOLANTTEMPERATURE

This message displays if the coolanttemperature is hot. See EngineOverheating on page 10-22.

Engine Oil Messages

CHANGE ENGINE OIL SOON

This message displays when theengine oil needs to be changed.When you change the engine oil, besure to reset the Oil Life System.See Engine Oil Life System onpage 10-13, Driver InformationCenter (DIC) (Base Level Cluster)on page 5-33 or Driver InformationCenter (DIC) (Uplevel Cluster) onpage 5-35, Engine Oil onpage 10-11, and MaintenanceSchedule on page 11-2.

ENGINE OIL HOT, IDLEENGINE

This message displays when theengine oil temperature is too hot.Stop and allow the vehicle to idleuntil it cools down.

ENGINE OIL LOW — ADD OIL

On some vehicles, this messagemay display when the engine oillevel is too low. Check the oil level.See Engine Oil on page 10-11.

OIL PRESSURE LOW — STOPENGINE

This message displays if low oilpressure levels occur. Stop thevehicle as soon as safely possibleand do not operate it until the causeof the low oil pressure has beencorrected. Check the oil as soon aspossible and have the vehicleserviced by your dealer.

Engine Power Messages

ENGINE POWER IS REDUCED

This message displays when thevehicle's engine power is reduced.Reduced engine power can affectthe vehicle's ability to accelerate.If this message is on, but there is noreduction in performance, proceedto your destination. Theperformance may be reduced thenext time the vehicle is driven. Thevehicle may be driven at a reducedspeed while this message is on, butmaximum acceleration and speedmay be reduced. Anytime thismessage stays on, the vehicleshould be taken to your dealer forservice as soon as possible.

Fuel System Messages

FUEL LEVEL LOW

This message displays when thevehicle is low on fuel. Refuel assoon as possible.



Key and Lock Messages

NO REMOTE DETECTED

This message displays when thetransmitter battery is weak onvehicles with Keyless Access. See“Starting the Vehicle with a LowTransmitter Battery” under RemoteKeyless Entry (RKE) SystemOperation on page 2-3.

NO REMOTE KEY WASDETECTED PLACE KEY INTRANSMITTER POCKET THENSTART YOUR VEHICLE

This message displays when tryingto start the vehicle if an RKEtransmitter is not detected. Thetransmitter battery may be weak.See “Starting the Vehicle with a LowTransmitter Battery” under RemoteKeyless Entry (RKE) SystemOperation on page 2-3.

REPLACE BATTERY INREMOTE KEY

This message displays when thebattery in the Remote Keyless Entry(RKE) transmitter needs to bereplaced. See “BatteryReplacement” under RemoteKeyless Entry (RKE) SystemOperation on page 2-3.

Object Detection SystemMessages

AUTOMATIC COLLISIONPREP OFF

This message displays when theActive Emergency Braking Systemhas been turned off. See ActiveEmergency Braking System onpage 9-54.

AUTOMATIC COLLISION PREPREDUCED

This message displays when theActive Emergency Braking Systemhas been set to the "Alert" setting.This setting disables most automatic

braking functions of the AutoCollision Preparation feature. Somelast-second automatic brakingcapability is still provided with the"Alert" setting, but braking is lesslikely to occur. See ActiveEmergency Braking System onpage 9-54.

AUTOMATIC COLLISIONPREPARATION UNAVAILABLE

This message displays when theActive Emergency Braking Systemhas been unavailable for some time.The Active Emergency BrakingSystem does not need service.

This can occur under the followingconditions:. The radar is not clean. Keep the

radar sensors free of mud, dirt,snow, ice, and slush. Clean theentire front and/or rear of thevehicle. For cleaninginstructions, see Exterior Careon page 10-86.



. Heavy rain or snow is interferingwith the radar object detection orcamera performance.

This message may also bedisplayed if there is a problem withthe StabiliTrak system.

FORWARD COLLISIONALERT OFF

This message displays when theForward Collision Alert has beenturned off.

FRONT CAMERA BLOCKEDCLEAN WINDSHIELD

This message displays when thecamera is blocked. Cleaning theoutside of the windshield behind therearview mirror may correct theissue. The Lane Departure Warningsystem will not operate. ForwardCollision Alert (FCA) may not workor may not work as well.

LANE DEPARTURE WARNINGUNAVAILABLE

This message displays whenattempting to activate the LaneDeparture Warning (LDW) systemwhen it is temporarily unavailable.The LDW system does not needservice.

This message could be due to thecamera being blocked. Cleaning theoutside of the windshield behind therearview mirror may correct theissue.

PARK ASSIST OFF

This message displays when theParking Assist system has beenturned off or when there is atemporary condition causing thesystem to be disabled.

REAR CROSS TRAFFICALERT OFF

This message displays when theRear Cross Traffic Alert has beenturned off.

SERVICE AUTOMATICCOLLISION PREP

If this message displays, take thevehicle to your dealer to repair thesystem. Adaptive Cruise Control(ACC), Forward Collision Alert(FCA), and/or the Active EmergencyBraking System may not work. Donot use these systems until thevehicle has been repaired.

SERVICE FRONT CAMERA

If this message remains on aftercontinued driving, the vehicle needsservice. Do not use the LaneDeparture Warning (LDW) andForward Collision Alert (FCA)features. Take the vehicle to yourdealer.

SERVICE PARKING ASSIST

This message displays if there is aproblem with the Parking Assistsystem. Do not use this system tohelp you park. See your dealer forservice.



SERVICE SIDE DETECTIONSYSTEM

If this message remains on aftercontinued driving, the vehicle needsservice. Side Blind Zone Alert(SBZA), Lane Change Alert (LCA),and Rear Cross Traffic Alert (RCTA)features will not work. Take thevehicle to your dealer.

SIDE BLIND ZONE ALERT OFF

This message indicates that thedriver has turned the Side BlindZone Alert (SBZA) and LaneChange Alert (LCA) systems off.

SIDE DETECTION SYSTEMUNAVAILABLE

This message indicates that SideBlind Zone Alert (SBZA), LaneChange Alert (LCA), and RearCross Traffic Alert (RCTA) aredisabled either because the sensoris blocked and cannot detectvehicles in the blind zone, or thevehicle is passing through an openarea, such as the desert, wherethere is insufficient data for

operation. This message may alsoactivate during heavy rain or due toroad spray. The vehicle does notneed service. For cleaning, see"Washing the Vehicle" underExterior Care on page 10-86.

Ride Control SystemMessages

ALL WHEEL DRIVE OFF

This message displays when theAll-Wheel Drive (AWD) System hasbeen turned off. See All-WheelDrive on page 9-32.

SERVICE ALL WHEEL DRIVESYSTEM

This message displays when thereis a problem with the All-WheelDrive (AWD) System. See yourdealer for service.

SERVICE REAR AXLE

This message displays when thereis a problem with the All-WheelDrive (AWD) System. See yourdealer for service.

SERVICE TRACTIONCONTROL

This message displays when thereis a problem with the TractionControl System (TCS). When thismessage is displayed, the systemwill not limit wheel spin. Adjust yourdriving accordingly. See your dealerfor service.

SERVICE STABILITRAK

This message displays if there is aproblem with the StabiliTrak system.If this message appears, try to resetthe system. Stop; turn off the enginefor at least 15 seconds; then startthe engine again. If this messagestill comes on, it means there is aproblem. See your dealer forservice. The vehicle is safe to drive;however, you do not have thebenefit of StabiliTrak, so reduceyour speed and drive accordingly.



SPORT MODE ON

This message displays when usingthe interactive drive control. SeeSelective Ride Control on page 9-38for more information.

TRACTION CONTROL OFF

This message displays when theTraction Control System (TCS) isturned off. Adjust your drivingaccordingly.

TRACTION CONTROL ON

This message displays when theTraction Control System (TCS) isturned on.

Security Messages

THEFT ATTEMPTED

This message displays if the vehicledetects a tamper condition.

Starting the VehicleMessages

JUMP START ACTIVE WAIT TOSTART

This message displays whileperforming an on-board jump startof the vehicle. See “Jump Starting(On-board with eAssist Only).”

JUMP START COMPLETEATTEMPT START

This message displays whileperforming an on-board jump startof the vehicle. See “Jump Starting(On-board with eAssist Only).”

JUMP START DISABLED SEEOWNERS MANUAL

This message displays if there is aproblem with the on-board jumpstart system, or the 12 volt battery istoo low to perform an on-board jumpstart. Try using jumper cables andperforming a normal jump start. See“Jump Starting (On-board with

eAssist Only).” Take the vehicle toyour dealer for service if thismessage continues to be displayed.

Tire Messages

SERVICE TIRE MONITORSYSTEM

This message displays if there is aproblem with the Tire PressureMonitor System (TPMS). See TirePressure Monitor Operation onpage 10-51.

TIRE LEARNING ACTIVE

This message displays when thesystem is learning new tires. SeeTire Pressure Monitor Operation onpage 10-51.

TIRE PRESSURE LOW ADDAIR TO TIRE

On vehicles with the Tire PressureMonitor System (TPMS), thismessage displays when thepressure in one or more of thevehicle's tires is low.



The low tire pressure warning lightwill also come on. See TirePressure Light on page 5-28.

If a tire pressure message displays,inflate the tires until the tire pressureis equal to the values shown on theTire and Loading Information label.See Tires on page 10-41, VehicleLoad Limits on page 9-10, and TirePressure on page 10-48.

More than one tire pressuremessage can be received at a time.The DIC also shows the tirepressure values. See DriverInformation Center (DIC) (BaseLevel Cluster) on page 5-33 orDriver Information Center (DIC)(Uplevel Cluster) on page 5-35.

Transmission Messages

SERVICE TRANSMISSION

This message displays if there is aproblem with the transmission. Seeyour dealer.

SHIFT TO PARK

This message displays when thetransmission needs to be shifted toP (Park). This may appear whenattempting to remove the key fromthe ignition or from the vehicle if thevehicle is not in P (Park).

TRANSMISSION HOT — IDLEENGINE

This message displays and a chimesounds if the transmission fluid inthe vehicle gets hot. Driving with thetransmission fluid temperature highcan cause damage to the vehicle.Stop the vehicle and let it idle toallow the transmission to cool. Thismessage clears when the fluidtemperature reaches a safe level.

Washer Fluid Messages

WASHER FLUID LOW ADDFLUID

This message displays when thewindshield washer fluid is low. Fillthe windshield washer reservoir as

soon as possible. See EngineCompartment Overview onpage 10-6 for the location of thewindshield washer reservoir. Also,see Washer Fluid on page 10-23 formore information.

Window Messages

OPEN, THEN CLOSE DRIVER/PASSENGER WINDOW

This message is displayed when thewindow needs to be reprogrammed.If the vehicle's battery has beenrecharged or disconnected, you willneed to program each front windowfor the express-up feature to work.See Power Windows on page 2-20.



VehiclePersonalizationUse the audio system controls toaccess the personalization menusfor customizing vehicle features.

The following are all possiblepersonalization features. Dependingon the vehicle, some may not beavailable.

To access the personalizationmenus:

1. Press SETTINGS on the Homepage on the infotainment systemdisplay.

2. Press the desired feature todisplay a list of availableoptions.

3. Press the desired option.

4. Press to select the desiredoption setting.

5. Press q BACK to return to theprevious menu.

Personalization Menus

The following list of features may beavailable:. Time and Date. Language [Language]. Valet Mode. Radio. Vehicle. Bluetooth. Voice. Display. Rear Camera. Return to Factory Settings. Software Information

Each menu is detailed in thefollowing information.

Time and Date

Manually set the time and date. SeeClock on page 5-4.

Language [Language]

Select Language, then select fromthe available language(s).

Valet Mode

To turn Valet Mode on and off, see“Valet Mode” under “Settings” in theinfotainment manual.

Radio

To manage the radio features, see“Radio” under “Settings” in theinfotainment manual.

Vehicle

Select and the following maydisplay:. Climate and Air Quality. Collision/Detection Systems. Comfort and Convenience. Lighting. Power Door Locks. Remote Lock, Unlock, Start



Climate and Air Quality

Select and the following maydisplay:. Auto Fan Max Speed. Auto Defog. Auto Rear Defog

Auto Fan Max Speed

This feature will set the maximumauto fan speed.

Select Low, Medium, or High.

Auto Defog

When set to On, the front defog willautomatically react to temperatureand humidity conditions that maycause fogging.

Select Off or On.

Auto Rear Defog

If equipped, this allows the AutoRear Defog to be turned on or off.This feature will automatically turnon the rear window defogger when itis cold outside.

Select Off or On.

Collision/Detection Systems

Select and the following maydisplay:. Auto Collision Preparation. Go Notifier. Side Blind Zone Alert. Rear Cross Traffic Alert. Lane Change Alert

Auto Collision Preparation

This feature will turn on or off theForward Collision Alert feature aswell as the Automatic Brakingcapability of the Auto CollisionPreparation feature. With the Alertand Brake setting, both ForwardCollision Alert as well as theAutomatic Braking capability of theAuto Collision Preparation featureare available. The Alert settingdisables most automatic brakingfunctions of the Auto CollisionPreparation feature. Somelast-second automatic brakingcapability is still provided with theAlert setting, but it is much less

likely to be triggered by most drivingconditions. Off disables all ForwardCollision Alert and AutomaticBraking capabilities of the AutoCollision Preparation feature.

Select Off, Alert and Brake, or Alert.See Driver Assistance Systems onpage 9-49.

Go Notifier

This feature will give a reminder thatAdaptive Cruise Control provideswhen it has brought the vehicle to acomplete stop behind anotherstopping vehicle, and then thatvehicle drives on.

Select Off or On. See AdaptiveCruise Control on page 9-41.

Side Blind Zone Alert

This allows the feature to be turnedon or off.

Select Off or On. See Side BlindZone Alert (SBZA) on page 9-55.



Rear Cross Traffic Alert


Select Off or On. See AssistanceSystems for Parking or Backing onpage 9-49.

Lane Change Alert


Select Off or On. See Lane ChangeAlert on page 9-56.

Comfort and Convenience

Select and the following maydisplay:. Auto Memory Recall. Easy Exit Driver Seat. Chime Volume. Reverse Tilt Mirror

Auto Memory Recall

This feature automatically recallsthe current driver’s previously stored1 or 2 button positions whenentering the vehicle. See MemorySeats on page 3-6.

Select Off or On.

Easy Exit Driver Seat

This feature automatically recallsthe current driver’s previously storedEXIT button position when exitingthe vehicle. See Memory Seats onpage 3-6.

Select Off or On.

Chime Volume

This allows the selection of thechime volume level.

Press + or − to adjust the volume.

Reverse Tilt Mirror


Select Off or On.

Lighting

Select and the following maydisplay:. Vehicle Locator Lights. Exit Lighting

Vehicle Locator Lights

This feature will flash the exteriorlamps when K on the RemoteKeyless Entry (RKE) transmitter ispressed to locate the vehicle.

Select Off or On.

Exit Lighting

This allows the selection of howlong the exterior lamps stay onwhen leaving the vehicle when it isdark outside.

Select Off, 30 Seconds, 60Seconds, or 120 Seconds.

Power Door Locks

Select and the following maydisplay:. Unlocked Door Anti-Lockout



. Auto Door Unlock

. Delayed Door Lock

Unlocked Door Anti Anti-Lockout

When on, this feature will keep thedriver door from locking when thedoor is open. If Off is selected, theDelayed Door Lock menu will beavailable.

Select Off or On.

Auto Door Unlock

This allows selection of which of thedoors will automatically unlock whenthe vehicle is shifted into P (Park)with an automatic transmission orwhen the vehicle is turned off with amanual transmission.

Select Off, All Doors, or Driver Door.

Delayed Door Lock

When on, this feature will delay thelocking of the doors. To override thedelay, press the power door lockswitch on the door.

Select Off or On.

Remote Lock, Unlock, Start

Select and the following maydisplay:. Remote Unlock Light Feedback. Remote Lock Feedback. Remote Door Unlock. Remote Start Auto Heat Seats. Passive Door Unlock. Passive Door Lock. Remote Left in Vehicle Alert

Remote Unlock Light Feedback

When on, the exterior lamps willflash when unlocking the vehiclewith the RKE transmitter.

Select Off or Flash Lights.

Remote Lock Feedback

This allows selection of what type offeedback is given when locking thevehicle with the RKE transmitter.

Select Off, Lights and Horn, LightsOnly, or Horn Only.

Remote Door Unlock

This allows selection of which doorswill unlock when pressing K on theRKE transmitter.

Select All Doors or Driver Door.

Remote Start Auto Heat Seats

If equipped and turned on, thisfeature will turn the heated seats onwhen using remote start oncold days.

Select Off, On - Driver andPassenger, or On - Driver.

Passive Door Unlock

This allows the selection of whatdoors will unlock when using thebutton on the driver door to unlockthe vehicle.

Select All Doors or Driver Door.

Passive Door Lock

This feature can be turned on or off,or can be used to select feedbackwhen using the button on the driver



door to lock the vehicle. SeeRemote Keyless Entry (RKE)System Operation on page 2-3.

Select Off, On with HornChirp, or On.

Remote Left in Vehicle Alert

This feature sounds an alert whenthe RKE transmitter is left in thevehicle.

Select Off or On.

Bluetooth

Select and the following may bedisplay:. Pair New Device. Device Management. Ringtones. Voice Mail Numbers

Pair New Device

Select to pair a new device. See“Pairing” in “Bluetooth (InfotainmentControls)” in the infotainmentmanual.

Device Management

Select to connect to a differentphone source, disconnect a phone,or delete a phone.

Ringtones

Press to change the ring tone forthe specific phone. The phone doesnot need to be connected to changethe ring.

Voice Mail Numbers

This feature displays the voice mailnumber for all connected phones.The voice mail number may bechanged by selecting EDIT orpressing the EDIT button and typingin a new number, then select SAVEor press the SAVE button.

Voice

Select and the following maydisplay:. Confidence Threshold. Prompt Length. Audio Feedback Speed

Confidence Threshold

This feature adjusts the sensitivity ofthe speech recognition system.

Select Confirm More orConfirm Less.

Prompt Length

This feature adjusts the voiceprompt length.

Select Short or Long.

Audio Feedback Speed

This feature adjusts the audiofeedback speed.

Select Slow, Medium, or Fast.

Display

Select and the following maydisplay:. Mode. Calibrate Touchscreen. Turn Display Off

Mode

Select to change the display screenfor day or night driving.



Select Auto, Day, or Night.

Calibrate Touchscreen

Select to calibrate the touchscreen,then follow the prompts.

Turn Display Off

Select to turn the display off. Pressanywhere on the display area or anyfaceplate button to turn thedisplay on.

Rear Camera

Select and the following maydisplay:. Guidance Lines. Rear Camera Display. Rear Cross Traffic Alert. Rear Park Assist Symbols

Guidance Lines

Select to turn Off or On. SeeAssistance Systems for Parking orBacking on page 9-49.

Rear Camera Display


Rear Cross Traffic Alert


Rear Park Assist Symbols


Return to Factory Settings

Select and the following maydisplay:. Restore Vehicle Settings. Clear All Private Data. Restore Radio Settings

Restore Vehicle Settings

This allows selection of restoringvehicle settings.

Select Restore or Cancel.

Clear All Private Data

This allows selection to clear allprivate information from the vehicle.

Select Delete or Cancel.

Restore Radio Settings

This allows selection to restoreradio settings.

Select Restore or Cancel.

Software Information

Select to view the infotainmentsystem current software information.



Universal RemoteSystemSee Radio Frequency Statement onpage 13-15.

Universal Remote SystemProgramming

If equipped, these buttons are in theoverhead console.

This system can replace up to threeremote control transmitters used toactivate devices such as garagedoor openers, security systems, andhome automation devices. Theseinstructions refer to a garage dooropener, but can be used for otherdevices.

Do not use the Universal Remotesystem with any garage door openerthat does not have the stop andreverse feature. This includes anygarage door opener modelmanufactured before April 1, 1982.

Read these instructions completelybefore programming the UniversalRemote system. It may help to haveanother person assist with theprogramming process.

Keep the original hand-heldtransmitter for use in other vehiclesas well as for future programming.Erase the programming whenvehicle ownership is terminated.See “Erasing Universal RemoteSystem Buttons” later in thissection.

To program a garage door opener,park outside directly in line with andfacing the garage door openerreceiver. Clear all people andobjects near the garage door.

Make sure the hand-held transmitterhas a new battery for quick andaccurate transmission of theradio-frequency signal.

Programming the UniversalRemote System

For questions or help programmingthe Universal Remote system, call1-800-355-3515 or seewww.homelink.com.

Programming involvestime-sensitive actions, and may timeout causing the procedure to berepeated.

To program up to three devices:

1. Hold the end of the hand-heldtransmitter about 3 to 8 cm (1 to3 in) away from the UniversalRemote system buttons with theindicator light in view. Thehand-held transmitter wassupplied by the manufacturer ofthe garage door opener receiver.



2. At the same time, press andhold both the hand-heldtransmitter button and one of thethree Universal Remote systembuttons to be used to operatethe garage door. Do not releaseeither button until the indicatorlight changes from a slow to arapid flash. Then release bothbuttons.

Some garage door openers mayrequire substitution of Step 2with the procedure under “RadioSignals for Canada and SomeGate Operators” later in thissection.

3. Press and hold the newlyprogrammed Universal Remotesystem button for five secondswhile watching the indicator lightand garage door activation.. If the indicator light stays on

continuously or the garagedoor moves when thebutton is pressed, then

programming is complete.There is no need tocomplete Steps 4–6.

. If the indicator light doesnot come on or the garagedoor does not move, asecond button press maybe required. For a secondtime, press and hold thenewly programmed buttonfor five seconds. If the lightstays on or the garage doormoves, programming iscomplete.

. If the indicator light blinksrapidly for two seconds,then changes to a solid lightand the garage door doesnot move, continue withprogramming Steps 4–6.

Learn or Smart Button

4. After completing Steps 1–3 ,locate the Learn or Smart buttoninside garage on the garagedoor opener receiver. The nameand color of the button may varyby manufacturer.

5. Press and release the Learn orSmart button. Step 6 must becompleted within 30 seconds ofpressing this button.

6. Inside the vehicle, press andhold the newly programmedUniversal Remote system buttonfor two seconds and thenrelease it. If the garage doordoes not move or the lamp onthe garage door opener receiver



does not flash, press and holdthe same button a second timefor two seconds, then release it.Again, if the door does not moveor the garage door lamp doesnot flash, press and hold thesame button a third time fortwo seconds, then release it.

The Universal Remote systemshould now activate thegarage door.

Repeat the process forprogramming the two remainingbuttons.

Radio Signals for Canada andSome Gate Operators

For questions or programming helpcall 1-800-355-3515 or seewww.homelink.com.

Canadian radio-frequency laws andsome U.S. gate operators requiretransmitter signals to time out or quitafter several seconds oftransmission. This may not be long

enough for the Universal Remotesystem to pick up the signal duringprogramming.

If the programming did not work,replace Step 2 under “Programmingthe Universal Remote System” withthe following:

Press and hold the UniversalRemote system button whilepressing and releasing thehand-held transmitter button everytwo seconds until the signal hasbeen successfully accepted by theUniversal Remote system. TheUniversal Remote system indicatorlight will flash slowly at first and thenrapidly. Proceed with Step 3 under“Programming the Universal RemoteSystem” to complete.

Universal Remote SystemOperation

Using the Universal RemoteSystem

Press and hold the appropriateUniversal Remote system button forat least one-half second. Theindicator light will come on while thesignal is being transmitted.

Erasing Universal RemoteSystem Buttons

Erase all programmed buttons whenvehicle ownership is terminated.

To erase:

1. Press and hold the two outsidebuttons until the indicator lightbegins to flash. This should takeabout 10 seconds.

2. Release both buttons.



Reprogramming a SingleUniversal Remote SystemButton

To reprogram any of the systembuttons:

1. Press and hold any one of thebuttons. Do not release thebutton.

2. The indicator light will begin toflash after 20 seconds. Withoutreleasing the button, proceedwith Step 1 under “Programmingthe Universal Remote System.”



2 NOTES


Lighting 6-1

Lighting

Exterior LightingExterior Lamp Controls . . . . . . . . 6-1Exterior Lamps OffReminder . . . . . . . . . . . . . . . . . . . . 6-1

Headlamp High/Low-BeamChanger . . . . . . . . . . . . . . . . . . . . . 6-1

Flash-to-Pass . . . . . . . . . . . . . . . . . 6-2Daytime RunningLamps (DRL) . . . . . . . . . . . . . . . . 6-2

Automatic HeadlampSystem . . . . . . . . . . . . . . . . . . . . . . 6-2

Hazard Warning Flashers . . . . . 6-3Turn and Lane-ChangeSignals . . . . . . . . . . . . . . . . . . . . . . 6-3

Fog Lamps . . . . . . . . . . . . . . . . . . . . 6-4

Interior LightingInstrument Panel IlluminationControl . . . . . . . . . . . . . . . . . . . . . . 6-4

Dome Lamps . . . . . . . . . . . . . . . . . 6-5Reading Lamps . . . . . . . . . . . . . . . 6-5

Lighting FeaturesEntry Lighting . . . . . . . . . . . . . . . . . 6-6Exit Lighting . . . . . . . . . . . . . . . . . . . 6-6Battery Power Protection . . . . . . 6-6

Exterior Lighting

Exterior Lamp Controls

The exterior lamp control is on theinstrument panel on the outboardside of the steering wheel.

Turn the control to the followingpositions:

O (Off): Turns off the exteriorlamps. The knob returns to theAUTO position after it is released.Turn to O again to reactivate theAUTO mode.

In Canada, the headlamps willautomatically reactivate when thevehicle is shifted out of P (Park) on

automatic transmission vehicles,and when the parking brake isreleased on manual transmissionvehicles.

AUTO (Automatic): Automaticallyturns the exterior lamps on and off,depending on outside lighting.

; (Parking Lamps): Turns on theparking lamps including all lamps,except the headlamps.

2 (Headlamps): Turns on theheadlamps together with the parkinglamps and instrument panel lights.

Exterior Lamps OffReminderA warning chime sounds if the driverdoor is opened while the ignition isoff and the exterior lamps are on.

Headlamp High/Low-Beam Changer23 (Headlamp High/Low-BeamChanger): Push the turn signallever away from you and release, to


6-2 Lighting

turn the high beams on. To return tolow beams, push the lever again orpull it toward you and release.

This indicator light turns on in theinstrument cluster when thehigh-beam headlamps are on.

Flash-to-PassTo flash the high beams, pull theturn signal lever toward you, andrelease.

Daytime RunningLamps (DRL)DRL can make it easier for others tosee the front of your vehicle duringthe day. Fully functional DRL arerequired on all vehicles first sold inCanada.

The DRL system turns on thelow-beam headlamps at a reducedbrightness. If equipped with HighIntensity Discharge (HID)headlamps, the dedicated DRL willcome on when all of the followingconditions are met:. The ignition is on.. The exterior lamps control is

in AUTO.. The light sensor determines it is

daytime.. The parking brake is released or

the vehicle is not in P (Park).

When the DRL are on, thelow-beam headlamps will be on.The taillamps, sidemarker lamps,instrument panel lights, and otherlamps will not be on.

The DRL turn off when theheadlamps are turned to O or theignition is off.

This vehicle may have a DRLdisabling function. When the DRLare on and a turn signal is activated,the DRL on that side will be off untilthe turn signal goes off.

Automatic HeadlampSystemWhen the exterior lamp control isset to AUTO and it is dark enoughoutside, the headlamps come onautomatically.

There is a light sensor on top of theinstrument panel. Do not cover thesensor; otherwise the headlampswill come on when they are notneeded.


Lighting 6-3

The system may also turn on theheadlamps when driving through aparking garage or tunnel.

When it is bright enough outside,the headlamps will turn off or maychange to Daytime RunningLamps (DRL).

The automatic headlamp systemturns off when the exterior lampcontrol is turned to O or the ignitionis off.

Lights On with Wipers

If the windshield wipers areactivated in daylight with the engineon, and the exterior lamp control isin AUTO, the headlamps, parkinglamps, and other exterior lampscome on. The transition time for thelamps coming on varies based onwiper speed. When the wipers arenot operating, these lamps turn off.Move the exterior lamp control toPor; to disable this feature.

Hazard Warning Flashers

| (Hazard Warning Flashers):Press this button on the centerstack above the audio system, tomake the front and rear turn signallamps flash on and off. Press againto turn the flashers off.

The hazard warning flashers turn onautomatically if the airbags deploy.

Turn and Lane-ChangeSignals

Move the lever all the way up ordown to signal a turn.

An arrow on the instrument clusterflashes in the direction of the turn orlane change.

Raise or lower the lever until thearrow starts to flash to signal a lanechange. Hold it there until the lanechange is completed. If the lever isbriefly pressed and released, theturn signal flashes three times.

The turn and lane-change signalcan be turned off manually bymoving the lever back to its originalposition.


6-4 Lighting

If after signaling a turn or lanechange, the arrow flashes rapidly ordoes not come on, a signal bulbmay be burned out.

Replace any burned out bulbs. If abulb is not burned out, check thefuse. See Fuses and CircuitBreakers on page 10-35.

Fog Lamps

To turn on the fog lamps,if equipped, the ignition and theheadlamps or parking lamps mustbe on.

# (Fog Lamps, If Equipped):Press to turn on or off. An indicatorlight on the instrument clustercomes on when the fog lampsare on.

Some localities have laws thatrequire the headlamps to be onalong with the fog lamps.

Interior Lighting

Instrument PanelIllumination Control

The brightness of the instrumentpanel lighting and steering wheelcontrols can be adjusted.

D (Instrument PanelIllumination): Move and hold thethumbwheel up or down to brightenor dim the lights.


Lighting 6-5

Dome Lamps

The interior lamps control in theoverhead console controls both thefront and rear interior lamps.

To operate:

( (Off): Turns the lamps off.

H (Door): Turns the lamps onwhen any door is opened.

' (On): Keeps the lamps on allthe time.

The interior lamps turn onautomatically if the airbags aredeployed.

Reading LampsThere are front and rear readinglamps.

The front reading lamps are in theoverhead console.

The rear reading lamps are in theheadliner.

# or$ (Reading Lamps): Pressto turn each lamp on or off.


6-6 Lighting

Lighting Features

Entry LightingThe headlamps, taillamps, licenseplate lamps, back-up lamps, domelamp, and most of the interior lightsturn on briefly when K is pressedon the Remote Keyless Entry (RKE)transmitter. See Remote KeylessEntry (RKE) System Operation onpage 2-3. When the driver door isopened, all control lights, DriverInformation Center (DIC) lights, anddoor pocket lights turn on. Afterabout 30 seconds the exterior lampsturn off, then the dome lamp andremaining interior lights dim to off.Entry lighting can be disabledmanually by changing the ignitionout of the OFF position, or bypressing Q on the RKE transmitter.

This feature can be changed. See“Vehicle Locator Lights” underVehicle Personalization onpage 5-48.

Exit LightingThe headlamps, taillamps, parkinglamps, and license plate lampscome on at night, or in areas withlimited lighting, when the key isremoved from the ignition. Thedome lamps also come on when thekey is removed from the ignition.The exterior lamps and dome lampsremain on after the door is closedfor a set amount of time, thenautomatically turn off.

If equipped with Keyless Access,the exterior lamps and dome lampsautomatically turn on when thedriver door is opened after theignition is turned off. See IgnitionPositions (Key Access) onpage 9-15 or Ignition Positions(Keyless Access) on page 9-17.

The exterior lamps turn offimmediately by turning the exteriorlamp control off.

This feature can be changed. SeeVehicle Personalization onpage 5-48.

Battery Power ProtectionThe battery saver feature isdesigned to protect the vehicle'sbattery.

To prevent battery discharge whiledriving, the following systems arereduced automatically in two stagesand then turned off:. Heated rear window and mirrors. Heated seats. Fan

In the second stage, a DriverInformation Center (DIC) messageis displayed confirming theactivation of the battery dischargeprotection. See Battery Voltage andCharging Messages on page 5-39.

If the exterior lamps or any interiorlights are left on and the ignition isturned off, the battery powerprotection system automaticallyturns the lamp off after about10 minutes.


Infotainment System 7-1

InfotainmentSystem

IntroductionInfotainment . . . . . . . . . . . . . . . . . . . 7-1

Introduction

InfotainmentSee the infotainment manual forinformation on the radio, audioplayers, phone, navigation system,and voice or speech recognition.It also includes information onsettings.


7-2 Infotainment System

2 NOTES


Climate Controls 8-1

Climate Controls

Climate Control SystemsDual Automatic Climate ControlSystem . . . . . . . . . . . . . . . . . . . . . . 8-1

Air VentsAir Vents . . . . . . . . . . . . . . . . . . . . . . 8-6

MaintenanceAir Intake . . . . . . . . . . . . . . . . . . . . . 8-6Passenger Compartment AirFilter . . . . . . . . . . . . . . . . . . . . . . . . . 8-6

Service . . . . . . . . . . . . . . . . . . . . . . . 8-6

Climate Control Systems

Dual Automatic Climate Control SystemThe heating, cooling, and ventilation for the vehicle can be controlled withthis system.

1. Driver and PassengerTemperature Controls

2. Heated Front Seats (IfEquipped)


8-2 Climate Controls

3. Defrost

4. Air Delivery Mode Controls

5. Fan Control

6. Power

7. Rear Window Defogger

8. A/C (Air Conditioning)

9. Recirculation

10. AUTO (Automatic Operation)

11. SYNC (SynchronizedTemperature)

Climate Control Influence oneAssist Operation and FuelEconomy (If Equipped)

The climate control system dependson other vehicle systems for heatand power input. Certain climatecontrol settings can lead to higherfuel usage and/or fewer auto stops.

The following climate controlsettings use more fuel:. Comfort air conditioning mode.. The defrost mode.

. Extreme temperature settings,such as 15°C (60°F) or 32°C(90°F).

. High fan speed settings.

To help reduce fuel usage:. Use the full automatic control as

described under “AutomaticOperation.”

. Use eco air conditioning, insteadof the comfort air conditioning.

. Select a temperature setting thatis higher in hot weather andlower in cold weather.

. Turn off the air conditioningwhen it is not needed.

. Only use defrost to clear thewindows.

Automatic Operation

The system automatically controlsthe fan speed, air delivery, airconditioning, and recirculation inorder to heat or cool the vehicle tothe desired temperature.

When the AUTO indicator light ison, the system is in full automaticoperation. If the air delivery mode,fan speed, recirculation, or airconditioning setting is adjusted, theAUTO indicator turns off and theselected settings will appear on thedisplay.

To place the system inautomatic mode:

1. Press AUTO.

2. Set the temperature. Allow thesystem time to stabilize. Adjustthe temperature as needed forbest comfort.

To improve fuel efficiency and tocool the vehicle faster, recirculationmay be automatically selected inwarm weather. The recirculationlight will not come on. Press@ toselect recirculation; press it again toselect outside air.

Q / R (Driver and PassengerTemperature Controls): Thetemperature can be adjusted



separately for the driver and thepassenger. Press to increase ordecrease the temperature.

SYNC (SynchronizedTemperature): Press to link allclimate zone settings to the driversettings. The SYNC indicator lightwill turn on. When the passengersettings are adjusted, the SYNCindicator light is off.

Manual Operation

O (Power): Press to turn the fan offor on.

Q9 R (Fan Control): Press toincrease or decrease the fan speed.The fan speed setting appears onthe main display. Pressing eitherbutton cancels automatic fan controland the fan is controlled manually.Press AUTO to return to automaticoperation.

Air Delivery Mode Controls:Press-,Y, or[ to change thedirection of the airflow. The currentmode appears in the display screen.Pressing either button cancels

automatic air delivery control andthe direction of the airflow iscontrolled manually. Press AUTO toreturn to automatic operation.

To change the current mode, selectone of the following:

- (Defog): Clears the windows offog or moisture. Air is directed to thewindshield and floor outlets.

Y (Vent): Air is directed to theinstrument panel outlets.

[ (Floor): Air is directed to thefloor outlets.

\ (Bi-Level): Air is directed to theinstrument panel outlets and thefloor outlets.

0 MAX (Defrost): Clears thewindshield of fog or frost morequickly. Air is directed to thewindshield.

For best results, clear all snow andice from the windshield beforedefrosting.

For eAssist vehicles that have theauto defog feature, auto stops canoccur in defrost mode. In this mode,the auto stops are shorter and lessfrequent than other air deliverymodes to prevent instant fogging.

A/C (Comfort Air Conditioning):Press to turn the air conditioningsystem on or off. If the climatecontrol system is turned off or theoutside temperature falls belowfreezing, the air conditioner willnot run.

Pressing this button cancelsautomatic air conditioning and turnsoff the air conditioner. Press AUTOto return to automatic operation andthe air conditioner runsautomatically as needed. When theindicator light is on, the airconditioner runs automatically tocool the air inside the vehicle or todry the air needed to defog thewindshield faster.

For eAssist vehicles, an auto stopmay occur if the climate controlsystem determines the a/c



compressor can be shut off and stillmaintain comfort levels with minimalwindshield fogging.

ECO A/C (For eAssist Vehicles):Press to cycle between the off, ecoand comfort air conditioning modes.The indicator will be lit green in eco,amber in comfort, and turns offwhen there is no A/C function. If thefan is turned off the A/C will not run.

The eco A/C setting balances fueleconomy and air conditioningcomfort. In warm weatherconditions, auto stops may occurmore frequently and the vehicleinterior may be warmer ascompared to the comfort airconditioning. This setting allowshigher humidity inside the vehicleand window fogging before theengine restarts.

Pressing the0 button during anauto stop may restart the engine toprevent window fogging. To reachcomfort levels quickly during an

auto stop, the engine will restart ifthe air conditioner is off and AUTOor A/C is selected.

If temperature controls are adjustedcooler by more than 1°C (1°F)during an auto stop, the engine willrestart to ensure that comfort isreached.

@ (Recirculation): Press to turnon recirculation. An indicator lightcomes on. Air is recirculated toquickly cool the inside of the vehicleor prevent outside air and odorsfrom entering.

Auto Defog: The climate controlsystem may have a sensor toautomatically detect high humidityinside the vehicle. When highhumidity is detected, the climatecontrol system may adjust tooutside air supply and turn on theair conditioner. The fan speed mayslightly increase to help preventfogging. If the climate controlsystem does not detect possiblewindow fogging, it returns to normaloperation.

To turn Auto Defog off or on, see“Climate and Air Quality” underVehicle Personalization onpage 5-48.

Rear Window Defogger

= (Rear Window Defogger):Press to turn the rear windowdefogger on or off.

The rear window defogger turns offautomatically after about10 minutes. If turned on again itruns for about five minutes beforeturning off. The defogger can alsobe turned off by turning the ignitionto ACC/ACCESSORY orLOCK/OFF.

The rear window defogger can beset to automatic operation. See“Climate and Air Quality” underVehicle Personalization onpage 5-48. When auto rear defog isselected, the rear window defoggerturns on automatically when theinterior temperature is cold and theoutside temperature is about 4°C(40°F) and below. The auto reardefogger turns off automatically



after about 10 minutes, or afterfive minutes if the outsidetemperature is not as cold.

For eAssist vehicles, auto reardefog will only run during a remotestart and the feature is not availablein the Vehicle Personalization menu.

If the vehicle is equipped withheated outside rearview mirrors,they turn on when the rear windowdefogger button is on and help toclear fog or frost from the surface ofthe mirror. See Heated Mirrors onpage 2-19.

{ Caution

Do not try to clear frost or othermaterial from the inside of thefront windshield and rear windowwith a razor blade or anythingelse that is sharp. This maydamage the rear windowdefogger grid and affect theradio's ability to pick up stationsclearly. The repairs would not becovered by the vehicle warranty.

M or L (Heated Front Seats, IfEquipped): Press M or L to heatthe driver or passenger seatcushion and seatback. See HeatedFront Seats on page 3-8.

Remote Start Climate ControlOperation (If Equipped): If thevehicle is equipped with the remotestart feature, the climate controlsystem may run when the vehicle isstarted remotely. The system usesthe driver’s previous settings to heator cool the inside of the vehicle. Therear defog may come on duringremote start based on cold ambientconditions. If the vehicle has heatedor ventilated seats, they may comeon during a remote start. SeeRemote Vehicle Start on page 2-9and Heated Front Seats onpage 3-8.

Sensor

The solar sensor, on top of theinstrument panel near thewindshield, monitors the solar heat.

The climate control system uses thesensor information to adjust thetemperature, fan speed,recirculation, and air delivery modefor best comfort.

Do not cover the sensor; otherwisethe automatic climate control systemmay not work properly.



Air VentsUse the louvers located on the airvents to change the direction of theairflow.

To open a vent, move thethumbwheel to | . To close the vent,move the thumbwheel to9.

Operation Tips. Keep all outlets open whenever

possible for best systemperformance.

. Keep the paths under all seatsclear of objects to help circulatethe air inside the vehicle moreeffectively.

. Use of non-GM approved hooddeflectors can adversely affectthe performance of the system.

Maintenance

Air IntakeClear away any ice, snow, or leavesfrom the air intake at the base of thewindshield that can block the flow ofair into the vehicle.

Passenger CompartmentAir FilterThe filter removes dust, pollen, andother airborne irritants from outsideair that is pulled into the vehicle.

The filter should be replaced as partof routine scheduled maintenance.See Maintenance Schedule onpage 11-2 for replacement intervals.For more information, see yourdealer.

ServiceAll vehicles have a label underhoodthat identifies the refrigerant used inthe vehicle. The refrigerant systemshould only be serviced by trained

and certified technicians. The airconditioning evaporator shouldnever be repaired or replaced byone from a salvage vehicle.It should only be replaced by a newevaporator to ensure proper andsafe operation.

During service, all refrigerantsshould be reclaimed with properequipment. Venting refrigerantsdirectly to the atmosphere is harmfulto the environment and may alsocreate unsafe conditions based oninhalation, combustion, frostbite,or other health-based concerns.


Driving and Operating 9-1

Driving andOperating

Driving InformationDistracted Driving . . . . . . . . . . . . . 9-2Defensive Driving . . . . . . . . . . . . . 9-3Drunk Driving . . . . . . . . . . . . . . . . . 9-3Control of a Vehicle . . . . . . . . . . . 9-3Braking . . . . . . . . . . . . . . . . . . . . . . . 9-3Steering . . . . . . . . . . . . . . . . . . . . . . . 9-4Off-Road Recovery . . . . . . . . . . . . 9-5Loss of Control . . . . . . . . . . . . . . . . 9-5Track Events and CompetitiveDriving . . . . . . . . . . . . . . . . . . . . . . . 9-6

Driving on Wet Roads . . . . . . . . . 9-6Highway Hypnosis . . . . . . . . . . . . 9-7Hill and Mountain Roads . . . . . . 9-7Winter Driving . . . . . . . . . . . . . . . . . 9-8If the Vehicle Is Stuck . . . . . . . . 9-10Vehicle Load Limits . . . . . . . . . . 9-10

Starting and OperatingNew Vehicle Break-In . . . . . . . . 9-15Ignition Positions (KeyAccess) . . . . . . . . . . . . . . . . . . . . 9-15

Ignition Positions (KeylessAccess) . . . . . . . . . . . . . . . . . . . . 9-17

Starting the Engine . . . . . . . . . . 9-18Engine Heater . . . . . . . . . . . . . . . 9-23Retained AccessoryPower (RAP) . . . . . . . . . . . . . . . 9-24

Shifting Into Park . . . . . . . . . . . . 9-24Shifting out of Park (AutomaticTransmission) . . . . . . . . . . . . . . 9-25

Parking . . . . . . . . . . . . . . . . . . . . . . 9-25Parking over ThingsThat Burn . . . . . . . . . . . . . . . . . . 9-26

Engine ExhaustEngine Exhaust . . . . . . . . . . . . . . 9-26Running the Vehicle WhileParked . . . . . . . . . . . . . . . . . . . . . 9-26

Automatic TransmissionAutomatic Transmission . . . . . 9-27Manual Mode . . . . . . . . . . . . . . . . 9-29

Manual TransmissionManual Transmission . . . . . . . . 9-30

Drive SystemsAll-Wheel Drive . . . . . . . . . . . . . . 9-32

BrakesAntilock BrakeSystem (ABS) . . . . . . . . . . . . . . 9-32

Parking Brake . . . . . . . . . . . . . . . 9-33Brake Assist . . . . . . . . . . . . . . . . . 9-35Hill Start Assist (HSA) . . . . . . . 9-35

Ride Control SystemsTraction Control/ElectronicStability Control . . . . . . . . . . . . 9-36

Selective Ride Control . . . . . . . 9-38

Cruise ControlCruise Control . . . . . . . . . . . . . . . 9-39Adaptive Cruise Control . . . . . 9-41

Driver Assistance SystemsDriver AssistanceSystems . . . . . . . . . . . . . . . . . . . . 9-49

Assistance Systems forParking or Backing . . . . . . . . . 9-49

Assistance Systems forDriving . . . . . . . . . . . . . . . . . . . . . 9-52

Forward Collision Alert (FCA)System . . . . . . . . . . . . . . . . . . . . . 9-52

Active Emergency BrakingSystem . . . . . . . . . . . . . . . . . . . . . 9-54


9-2 Driving and Operating

Side Blind ZoneAlert (SBZA) . . . . . . . . . . . . . . . 9-55

Lane Change Alert . . . . . . . . . . . 9-56Lane DepartureWarning (LDW) . . . . . . . . . . . . . 9-58

FuelFuel . . . . . . . . . . . . . . . . . . . . . . . . . 9-60Recommended Fuel . . . . . . . . . 9-60Gasoline Specifications . . . . . . 9-61California FuelRequirements . . . . . . . . . . . . . . 9-61

Fuels in Foreign Countries . . . 9-61Fuel Additives . . . . . . . . . . . . . . . 9-62E85 or FlexFuel . . . . . . . . . . . . . . 9-62Filling the Tank . . . . . . . . . . . . . . 9-63Filling a Portable FuelContainer . . . . . . . . . . . . . . . . . . . 9-64

TowingGeneral TowingInformation . . . . . . . . . . . . . . . . . 9-65

Conversions and Add-OnsAdd-On ElectricalEquipment . . . . . . . . . . . . . . . . . 9-65

Driving Information

Distracted DrivingDistraction comes in many formsand can take your focus from thetask of driving. Exercise goodjudgment and do not let otheractivities divert your attention awayfrom the road. Many localgovernments have enacted lawsregarding driver distraction. Becomefamiliar with the local laws inyour area.

To avoid distracted driving, alwayskeep your eyes on the road, handson the wheel, and mind on the drive.. Do not use a phone in

demanding driving situations.Use a hands-free method toplace or receive necessaryphone calls.

. Watch the road. Do not read,take notes, or look upinformation on phones or otherelectronic devices.

. Designate a front seatpassenger to handle potentialdistractions.

. Become familiar with vehiclefeatures before driving, such asprogramming favorite radiostations and adjusting climatecontrol and seat settings.Program all trip information intoany navigation device prior todriving.

. Wait until the vehicle is parkedto retrieve items that have fallento the floor.

. Stop or park the vehicle to tendto children.

. Keep pets in an appropriatecarrier or restraint.

. Avoid stressful conversationswhile driving, whether with apassenger or on a cell phone.



{ Warning

Taking your eyes off the road toolong or too often could cause acrash resulting in injury or death.Focus your attention on driving.

Refer to the infotainment section formore information on using thatsystem and the navigation system,if equipped, including pairing andusing a cell phone.

Defensive DrivingDefensive driving means “alwaysexpect the unexpected.” The firststep in driving defensively is to wearthe safety belt. See Safety Belts onpage 3-10.. Assume that other road users

(pedestrians, bicyclists, andother drivers) are going to becareless and make mistakes.Anticipate what they might doand be ready.

. Allow enough following distancebetween you and the driver infront of you.

. Focus on the task of driving.

Drunk DrivingDeath and injury associated withdrinking and driving is a globaltragedy.

{ Warning

Drinking and then driving is verydangerous. Your reflexes,perceptions, attentiveness, andjudgment can be affected by evena small amount of alcohol. Youcan have a serious — or evenfatal — collision if you drive afterdrinking.

Do not drink and drive or ride witha driver who has been drinking.Ride home in a cab; or if you arewith a group, designate a driverwho will not drink.

Control of a VehicleBraking, steering, and acceleratingare important factors in helping tocontrol a vehicle while driving.

BrakingBraking action involves perceptiontime and reaction time. Deciding topush the brake pedal is perceptiontime. Actually doing it isreaction time.

Average driver reaction time isabout three-quarters of a second. Inthat time, a vehicle moving at100 km/h (60 mph) travels 20 m(66 ft), which could be a lot ofdistance in an emergency.

Helpful braking tips to keep in mindinclude:. Keep enough distance between

you and the vehicle in frontof you.

. Avoid needless heavy braking.

. Keep pace with traffic.



If the engine ever stops while thevehicle is being driven, brakenormally but do not pump thebrakes. Doing so could make thepedal harder to push down. If theengine stops, there will be somepower brake assist but it will beused when the brake is applied.Once the power assist is used up, itcan take longer to stop and thebrake pedal will be harder to push.

Steering

Variable Effort Steering

Some vehicles have a steeringsystem that varies the amount ofeffort required to steer the vehicle inrelation to the speed of the vehicle.

The amount of steering effortrequired is less at slower speeds tomake the vehicle moremaneuverable and easier to park. Atfaster speeds, the steering effortincreases to provide a sport-like feelto the steering. This providesmaximum control and stability.

If the vehicle seems harder to steerthan normal when parking or drivingslowly, there may be a problem withthe system. You will still have powersteering, but steering will be stifferthan normal at slow speeds. Seeyour dealer for service.

Electric Power Steering

The vehicle has electric powersteering. It does not have powersteering fluid. Regular maintenanceis not required.

If power steering assist is lost dueto a system malfunction, the vehiclecan be steered, but may requireincreased effort. See your dealer ifthere is a problem.

If the steering wheel is turned until itreaches the end of its travel and isheld against that position for anextended period of time, powersteering assist may be reduced.

If steering assist is used for anextended period of time, powerassist may be reduced.

Normal use of the power steeringassist should return when thesystem cools down.

See specific vehicle steeringmessages under Vehicle Messageson page 5-39.

See your dealer if there is aproblem.

Curve Tips. Take curves at a reasonable

speed.. Reduce speed before entering a

curve.. Maintain a reasonable steady

speed through the curve.. Wait until the vehicle is out of

the curve before acceleratinggently into the straightaway.

Steering in Emergencies. There are some situations when

steering around a problem maybe more effective than braking.



. Holding both sides of thesteering wheel allows you to turn180 degrees without removinga hand.

. Antilock Brake System (ABS)allows steering while braking.

Off-Road Recovery

The vehicle's right wheels can dropoff the edge of a road onto theshoulder while driving. Followthese tips:

1. Ease off the accelerator andthen, if there is nothing in theway, steer the vehicle so that itstraddles the edge of thepavement.

2. Turn the steering wheel aboutone-eighth of a turn, until theright front tire contacts thepavement edge.

3. Turn the steering wheel to gostraight down the roadway.

Loss of Control

Skidding

There are three types of skids thatcorrespond to the vehicle's threecontrol systems:. Braking Skid — wheels are not

rolling.

. Steering or Cornering Skid —too much speed or steering in acurve causes tires to slip andlose cornering force.

. Acceleration Skid — too muchthrottle causes the drivingwheels to spin.

Defensive drivers avoid most skidsby taking reasonable care suited toexisting conditions, and by notoverdriving those conditions. Butskids are always possible.

If the vehicle starts to slide, followthese suggestions:. Ease your foot off the

accelerator pedal and steer theway you want the vehicle to go.The vehicle may straighten out.Be ready for a second skid if itoccurs.

. Slow down and adjust yourdriving according to weatherconditions. Stopping distancecan be longer and vehiclecontrol can be affected whentraction is reduced by water,snow, ice, gravel, or other



material on the road. Learn torecognize warning clues — suchas enough water, ice, or packedsnow on the road to make amirrored surface — and slowdown when you have any doubt.

. Try to avoid sudden steering,acceleration, or braking,including reducing vehicle speedby shifting to a lower gear. Anysudden changes could causethe tires to slide.

Remember: Antilock brakes helpavoid only the braking skid.

Track Events andCompetitive DrivingRacing, track testing, or competitivedriving may affect the vehiclewarranty. See the warranty manualbefore using the vehicle for racingor other competitive driving.

{ Caution

If the vehicle is used for trackevents and competitive driving,the engine may use more oil thanit would with normal use. Low oillevels can damage the engine.Check the oil level often and atthe proper level. See Engine Oilon page 10-11.

For the 2.0L engine: Add and keepthe oil level at 1 L (1 qt) above thehigh mark when driving under theseconditions. For information on howto check and add oil, see Engine Oilon page 10-11.

{ Caution

During a first time track or racingevent, high rear axletemperatures can occur. Damage

(Continued)

Caution (Continued)

could be caused to the rear axleand would not be covered by thevehicle warranty.

Do not drive as long or as fast thefirst time the vehicle is driven onthe track or raced.

Driving on Wet RoadsRain and wet roads can reducevehicle traction and affect yourability to stop and accelerate.Always drive slower in these typesof driving conditions and avoiddriving through large puddles anddeep‐standing or flowing water.



{ Warning

Wet brakes can cause crashes.They might not work as well in aquick stop and could causepulling to one side. You couldlose control of the vehicle.

After driving through a largepuddle of water or a car/vehiclewash, lightly apply the brakepedal until the brakes worknormally.

Flowing or rushing water createsstrong forces. Driving throughflowing water could cause thevehicle to be carried away. If thishappens, you and other vehicleoccupants could drown. Do notignore police warnings and bevery cautious about trying to drivethrough flowing water.

Hydroplaning

Hydroplaning is dangerous. Watercan build up under the vehicle'stires so they actually ride on thewater. This can happen if the road iswet enough and you are going fastenough. When the vehicle ishydroplaning, it has little or nocontact with the road.

There is no hard and fast rule abouthydroplaning. The best advice is toslow down when the road is wet.

Other Rainy Weather Tips

Besides slowing down, other wetweather driving tips include:. Allow extra following distance.. Pass with caution.. Keep windshield wiping

equipment in good shape.. Keep the windshield washer fluid

reservoir filled.. Have good tires with proper

tread depth. See Tires onpage 10-41.

. Turn off cruise control.

Highway HypnosisAlways be alert and pay attention toyour surroundings while driving.If you become tired or sleepy, find asafe place to park the vehicleand rest.

Other driving tips include:. Keep the vehicle well ventilated.. Keep the interior

temperature cool.. Keep your eyes moving — scan

the road ahead and to the sides.. Check the rearview mirror and

vehicle instruments often.

Hill and Mountain RoadsDriving on steep hills or throughmountains is different than drivingon flat or rolling terrain. Tips fordriving in these conditions include:. Keep the vehicle serviced and in

good shape.



. Check all fluid levels and brakes,tires, cooling system, andtransmission.

. Shift to a lower gear when goingdown steep or long hills.

{ Warning

Using the brakes to slow thevehicle on a long downhill slopecan cause brake overheating, canreduce brake performance, andcould result in a loss of braking.Shift the transmission to a lowergear to let the engine assist thebrakes on a steep downhill slope.

{ Warning

Coasting downhill in N (Neutral)or with the ignition off isdangerous. This can causeoverheating of the brakes and

(Continued)

Warning (Continued)

loss of steering. Always have theengine running and the vehiclein gear.

. Stay in your own lane. Do notswing wide or cut across thecenter of the road. Drive atspeeds that let you stay in yourown lane.

. Be alert on top of hills;something could be in your lane(stalled car, accident).

. Pay attention to special roadsigns (falling rocks area, windingroads, long grades, passing orno-passing zones) and takeappropriate action.

Winter Driving

Driving on Snow or Ice

Drive carefully when there is snowor ice between the tires and theroad, creating less traction or grip.

Wet ice can occur at about 0°C (32°F) when freezing rain begins to fall,resulting in even less traction. Avoiddriving on wet ice or in freezing rainuntil roads can be treated with saltor sand.

Drive with caution, whatever thecondition. Accelerate gently sotraction is not lost. Accelerating tooquickly causes the wheels to spinand makes the surface under thetires slick, so there is even lesstraction.

Try not to break the fragile traction.If you accelerate too fast, the drivewheels will spin and polish thesurface under the tires even more.

Traction Control should be turnedon. See Traction Control/ElectronicStability Control on page 9-36.

The Antilock Brake System (ABS)improves vehicle stability duringhard stops on slippery roads, butapply the brakes sooner than whenon dry pavement. See AntilockBrake System (ABS) on page 9-32.



Allow greater following distance onany slippery road and watch forslippery spots. Icy patches canoccur on otherwise clear roads inshaded areas. The surface of acurve or an overpass can remain icywhen the surrounding roads areclear. Avoid sudden steeringmaneuvers and braking whileon ice.

Turn off cruise control on slipperysurfaces.

Blizzard Conditions

Being stuck in snow can be aserious situation. Stay with thevehicle unless there is help nearby.If possible, use RoadsideAssistance. See RoadsideAssistance Program on page 13-5.To get help and keep everyone inthe vehicle safe:. Turn on the hazard warning

flashers.. Tie a red cloth to an outside

mirror.

{ Warning

Snow can trap engine exhaustunder the vehicle. This maycause exhaust gases to getinside. Engine exhaust containscarbon monoxide (CO) whichcannot be seen or smelled. It cancause unconsciousness and evendeath.

If the vehicle is stuck in the snow:. Clear away snow from aroundthe base of your vehicle,especially any that is blockingthe exhaust pipe.

. Check again from time totime to be sure snow doesnot collect there.

. Open a window about 5 cm(2 in) on the side of thevehicle that is away from thewind to bring in fresh air.

(Continued)

Warning (Continued)

. Fully open the air outlets onor under the instrumentpanel.

. Adjust the climate controlsystem to a setting thatcirculates the air inside thevehicle and set the fan speedto the highest setting. See“Climate Control Systems”.

For more information aboutcarbon monoxide, see EngineExhaust on page 9-26.

To save fuel, run the engine for onlyshort periods as needed to warmthe vehicle and then shut the engineoff and close the window most ofthe way to save heat. Repeat thisuntil help arrives but only when youfeel really uncomfortable from thecold. Moving about to keep warmalso helps.



If it takes some time for help toarrive, now and then when you runthe engine, push the acceleratorpedal slightly so the engine runsfaster than the idle speed. Thiskeeps the battery charged to restartthe vehicle and to signal for helpwith the headlamps. Do this as littleas possible to save fuel.

If the Vehicle Is StuckSlowly and cautiously spin thewheels to free the vehicle whenstuck in sand, mud, ice, or snow.

If stuck too severely for the tractionsystem to free the vehicle, turn thetraction system off and use therocking method. See TractionControl/Electronic Stability Controlon page 9-36.

{ Warning

If the vehicle's tires spin at highspeed, they can explode, and youor others could be injured. The

(Continued)

Warning (Continued)

vehicle can overheat, causing anengine compartment fire or otherdamage. Spin the wheels as littleas possible and avoid goingabove 56 km/h (35 mph).

Rocking the Vehicle to Getit Out

Turn the steering wheel left andright to clear the area around thefront wheels. Turn off any tractionsystem. Shift back and forthbetween R (Reverse) and a lowforward gear, spinning the wheelsas little as possible. To preventtransmission wear, wait until thewheels stop spinning before shiftinggears. Release the acceleratorpedal while shifting, and presslightly on the accelerator pedalwhen the transmission is in gear.Slowly spinning the wheels in theforward and reverse directionscauses a rocking motion that couldfree the vehicle. If that does not get

the vehicle out after a few tries, itmight need to be towed out. If thevehicle does need to be towed out,see Towing the Vehicle onpage 10-82.

Vehicle Load LimitsIt is very important to know howmuch weight the vehicle cancarry. This weight is called thevehicle capacity weight andincludes the weight of alloccupants, cargo and allnonfactory-installed options.Two labels on the vehicle showhow much weight it mayproperly carry, the Tire andLoading Information label andthe Certification label.

{ Warning

Do not load the vehicle anyheavier than the GrossVehicle Weight Rating

(Continued)



Warning (Continued)

(GVWR), or either themaximum front or rear GrossAxle Weight Rating (GAWR).This can cause systems tobreak and change the way thevehicle handles. This couldcause loss of control and acrash. Overloading can alsoshorten the life of the vehicle.

Tire and Loading InformationLabel

Label Example

A vehicle-specific Tire andLoading Information label isattached to the vehicle's centerpillar (B-pillar). With the driverdoor open, you will find the labelattached below the door lockpost. The Tire and LoadingInformation label shows thenumber of occupant seating

positions (1), and the maximumvehicle capacity weight (2) inkilograms and pounds.

The Tire and LoadingInformation label also shows thetire size of the originalequipment tires (3) and therecommended cold tire inflationpressures (4). For moreinformation on tires and inflationsee Tires on page 10-41 andTire Pressure on page 10-48.

There is also important loadinginformation on the Certificationlabel. It tells you the GrossVehicle Weight Rating (GVWR)and the Gross Axle WeightRating (GAWR) for the front andrear axle. See “CertificationLabel” later in this section.



“Steps for Determining CorrectLoad Limit–

1. Locate the statement "Thecombined weight ofoccupants and cargo shouldnever exceed XXX kg orXXX lbs." on your vehicle’splacard.

2. Determine the combinedweight of the driver andpassengers that will be ridingin your vehicle.

3. Subtract the combinedweight of the driver andpassengers from XXX kg orXXX lbs.

4. The resulting figure equalsthe available amount of cargoand luggage load capacity.For example, if the "XXX"amount equals 1400 lbs. andthere will be five 150 lbpassengers in your vehicle,the amount of available cargo

and luggage load capacity is650 lbs. (1400-750 (5 x 150)= 650 lbs.)

5. Determine the combinedweight of luggage and cargobeing loaded on the vehicle.That weight may not safelyexceed the available cargoand luggage load capacitycalculated in Step 4.

6. If your vehicle will be towinga trailer, load from your trailerwill be transferred to yourvehicle. Consult this manualto determine how thisreduces the available cargoand luggage load capacity ofyour vehicle.”

This vehicle is neither designednor intended to tow a trailer.

Example 1

1. Vehicle Capacity Weightfor Example 1 = 453 kg(1,000 lbs).

2. Subtract Occupant Weight@ 68 kg (150 lbs) × 2 =136 kg (300 lbs).

3. Available Occupant andCargo Weight = 317 kg(700 lbs).



Example 2


2. Subtract Occupant Weight@ 68 kg (150 lbs) × 5 =340 kg (750 lbs).

3. Available Cargo Weight =113 kg (250 lbs).

Example 3


2. Subtract Occupant Weight@ 91 kg (200 lbs) × 5 =453 kg (1,000 lbs).

3. Available Cargo Weight =0 kg (0 lbs).

Refer to the vehicle's Tire andLoading Information label forspecific information about thevehicle's capacity weight and

seating positions. The combinedweight of the driver, passengers,and cargo should never exceedthe vehicle's capacity weight.

Certification Label

Label Example

A vehicle-specific Certificationlabel is attached to the driverside center pillar (B-pillar). Thelabel tells the gross weightcapacity of the vehicle, calledthe Gross Vehicle Weight Rating(GVWR). The GVWR includesthe weight of the vehicle, all



occupants, fuel, and cargo.Never exceed the GVWR for thevehicle, or the Gross AxleWeight Rating (GAWR) for eitherthe front or rear axle.

And, if there is a heavy load, itshould be spread out. See“Steps for Determining CorrectLoad Limit” earlier in thissection.

{ Warning

Do not load the vehicle anyheavier than the GrossVehicle Weight Rating(GVWR), or either themaximum front or rear GrossAxle Weight Rating (GAWR).This can cause systems tobreak and change the way thevehicle handles. This couldcause loss of control and acrash. Overloading can alsoshorten the life of the vehicle.

If you put things inside thevehicle— like suitcases, tools,packages, or anythingelse— they will go as fast as thevehicle goes. If you have to stopor turn quickly, or if there is acrash, they will keep going.

{ Warning

Things inside the vehicle canstrike and injure people in asudden stop or turn, or in acrash.

. Put things in the cargoarea of the vehicle. In thecargo area, put them asfar forward as possible.Try to spread the weightevenly.

(Continued)

Warning (Continued)

. Never stack heavierthings, like suitcases,inside the vehicle so thatsome of them are abovethe tops of the seats.

. Do not leave anunsecured child restraintin the vehicle.

. Secure loose items in thevehicle.

. Do not leave a seat foldeddown unless needed.



Starting andOperating

New Vehicle Break-In

{ Caution

The vehicle does not need anelaborate break-in. But it willperform better in the long run ifyou follow these guidelines:

. Do not drive at any oneconstant speed, fast or slow,for the first 805 km (500 mi).Do not make full-throttlestarts. Avoid downshifting tobrake or slow the vehicle.

. Avoid making hard stops forthe first 322 km (200mi) orso. During this time the newbrake linings are not yetbroken in. Hard stops withnew linings can meanpremature wear and earlierreplacement. Follow this

(Continued)

Caution (Continued)

breaking-in guideline everytime you get new brakelinings.

Following break-in, engine speedand load can be graduallyincreased.

Ignition Positions (KeyAccess)

The ignition switch has four differentpositions.

{ Caution

Using a tool to force the key toturn in the ignition could causedamage to the switch or break thekey. Use the correct key, makesure it is all the way in, and turn itonly with your hand. If the keycannot be turned by hand, seeyour dealer.

The key must be fully extended tostart the vehicle.

To shift out of P (Park), turn theignition to ON/RUN and apply thebrake pedal.

1 (STOPPING THE ENGINE/LOCK/OFF): When the vehicle is stopped,turn the ignition switch to LOCK/OFF to turn the engine off. RetainedAccessory Power (RAP) will remainactive. See Retained AccessoryPower (RAP) on page 9-24 for moreinformation.



This is the only position from whichthe key can be removed. This locksthe steering wheel, ignition, andautomatic transmission.

Do not turn the engine off when thevehicle is moving. This will cause aloss of power assist in the brakeand steering systems and disablethe airbags.

If the vehicle must be shut off in anemergency:

1. Brake using a firm and steadypressure. Do not pump thebrakes repeatedly. This maydeplete power assist, requiringincreased brake pedal force.

2. Shift the vehicle to neutral. Thiscan be done while the vehicle ismoving. After shifting to neutral,firmly apply the brakes and steerthe vehicle to a safe location.

3. Come to a complete stop. Shiftto P (Park) with an automatictransmission, or Neutral with amanual transmission. Turn theignition to LOCK/OFF.

4. Set the parking brake. SeeParking Brake on page 9-33.

{ Warning

Turning off the vehicle whilemoving may cause loss of powerassist in the brake and steeringsystems and disable the airbags.While driving, only shut thevehicle off in an emergency.

If the vehicle cannot be pulled over,and must be shut off while driving,turn the ignition to ACC/ACCESSORY.

The ignition switch can bind in theLOCK/OFF position with the wheelsturned off center. If this happens,move the steering wheel from rightto left while turning the key to ACC/ACCESSORY. If this does not work,then the vehicle needs service.

2 (ACC/ACCESSORY): Thisposition unlocks the steering wheel.Some accessories can be used inthis position.

3 (ON/RUN): The ignition switchstays in this position when theengine is running. This position canbe used to operate the electricalaccessories, as well as to displaysome warning and indicator lights.This position can also be used forservice and diagnostics, and toverify the proper operation of themalfunction indicator lamp as maybe required for emission inspectionpurposes.

The battery could be drained if thekey is left in the ON/RUN positionwith the engine off. The vehiclemight not start if the battery isallowed to drain for an extendedperiod of time.

4 (START): This position starts theengine. When the engine starts,release the key. The ignition switchwill return to ON/RUN for normaldriving.

If the ignition becomes difficult toturn, see Keys on page 2-1.



Ignition Positions(Keyless Access)

The vehicle may have an electronickeyless ignition with pushbuttonstart.

Pressing the button cycles it throughthree modes, ACC/ACCESSORY,ON/RUN/START, and Stopping theEngine/OFF.

The transmitter must be in thevehicle for the system to operate.If the pushbutton start is notworking, the vehicle may be near a

strong radio antenna signal causinginterference to the keyless accesssystem. See Remote Keyless Entry(RKE) System Operation onpage 2-3 for more information.

To shift out of P (Park), the vehiclemust be in ON/RUN and the brakepedal must be applied.

Stopping the Engine/OFF (NoIndicator Lights): When thevehicle is stopped, press theENGINE START/STOP button onceto turn the engine off.

If the vehicle is in P (Park), theignition will turn off, and RetainedAccessory Power (RAP) will remainactive. See Retained AccessoryPower (RAP) on page 9-24 for moreinformation.

If the vehicle is not in P (Park), theignition will return to ACC/ACCESSORY and display amessage in the Driver InformationCenter (DIC). See TransmissionMessages on page 5-47 for more

information. When the vehicle isshifted into P (Park), the ignitionsystem will switch to OFF.

Do not turn the engine off when thevehicle is moving. This will cause aloss of power assist in the brakeand steering systems and disablethe airbags.

If the vehicle must be shut off in anemergency:

1. Brake using a firm and steadypressure. Do not pump thebrakes repeatedly. This maydeplete power assist, requiringincreased brake pedal force.

2. Shift the vehicle to N (Neutral).This can be done while thevehicle is moving. After shiftingto N (Neutral), firmly apply thebrakes and steer the vehicle to asafe location.

3. Come to a complete stop. Shiftto P (Park) with an automatictransmission, or Neutral with amanual transmission. Turn theignition to LOCK/OFF.



4. Set the parking brake. SeeParking Brake on page 9-33.

{ Warning

Turning off the vehicle whilemoving may cause loss of powerassist in the brake and steeringsystems and disable the airbags.While driving, only shut thevehicle off in an emergency.

If the vehicle cannot be pulled over,and must be shut off while driving,press and hold the ENGINE START/STOP button for longer thantwo seconds, or press twice infive seconds.

ACC/ACCESSORY (AmberIndicator Light): This mode allowsyou to use some electricalaccessories when the engine is off.

With the ignition off, pressing thebutton one time without the brakepedal applied will place the ignitionsystem in ACC/ACCESSORY.

The ignition will switch from ACC/ACCESSORY to OFF afterfive minutes to prevent batteryrun down.

ON/RUN/START (Green IndicatorLight): This mode is for driving andstarting. With the ignition off, andthe brake pedal applied, pressingthe button once will place theignition system in ON/RUN/START.Once engine cranking begins,release the button. Engine crankingwill continue until the engine starts.See Starting the Engine onpage 9-18 for more information. Theignition will then remain in ON/RUN.

Service Only Mode

This power mode is available forservice and diagnostics, and toverify the proper operation of themalfunction indicator lamp as maybe required for emission inspectionpurposes. With the vehicle off, andthe brake pedal not applied,pressing and holding the button formore than five seconds will placethe vehicle in Service Only Mode.

The instruments and audio systemswill operate as they do in ON/RUN,but the vehicle will not be able to bedriven. The engine will not start inService Only Mode. Push the buttonagain to turn the vehicle off.

Starting the EnginePlace the transmission in theproper gear.

Automatic Transmission

Move the shift lever to P (Park) orN (Neutral). The engine will not startin any other position. To restart thevehicle when it is already moving,use N (Neutral) only.

{ Caution

Do not try to shift to P (Park) if thevehicle is moving. If you do, youcould damage the transmission.Shift to P (Park) only when thevehicle is stopped.



{ Caution

If you add electrical parts oraccessories, you could changethe way the engine operates. Anyresulting damage would not becovered by the vehicle warranty.See Add-On Electrical Equipmenton page 9-65.

Manual Transmission

The shift lever should be in Neutraland the parking brake engaged.Hold the clutch pedal down to thefloor and start the engine. Thevehicle will not start if the clutchpedal is not all the way down.

Starting Procedure (Key Access)

1. With your foot off the acceleratorpedal, turn the ignition key toSTART. When the engine starts,let go of the ignition.

The idle speed will go down asyour engine gets warm. Do notrace the engine immediatelyafter starting it. Operate theengine and transmission gentlyto allow the oil to warm up andlubricate all moving parts.

The vehicle has aComputer-Controlled CrankingSystem. This feature assists instarting the engine and protectscomponents. If the ignition key isturned to the START position,and then released when theengine begins cranking, theengine will continue cranking fora few seconds or until thevehicle starts. If the engine doesnot start and the key is held inSTART for many seconds,cranking will be stopped after15 seconds to prevent cranking

motor damage. To prevent geardamage, this system alsoprevents cranking if the engineis already running. Enginecranking can be stopped byturning the ignition switch toACC/ACCESSORY orLOCK/OFF.

{ Caution

Cranking the engine for longperiods of time, by returning theignition to the START positionimmediately after cranking hasended, can overheat and damagethe cranking motor, and drain thebattery. Wait at least 15 secondsbetween each try, to let thecranking motor cool down.

2. If the engine does not start afterfive to 10 seconds, especially invery cold weather (below −18°Cor 0°F), it could be flooded withtoo much gasoline. Try pushingthe accelerator pedal all the wayto the floor and holding it there



as you hold the key in START,or press the START button, forup to a maximum of 15 seconds.Wait at least 15 secondsbetween each try, to allow thecranking motor to cool down.When the engine starts, let go ofthe key or button, and theaccelerator. If the vehicle startsbriefly but then stops again, dothe same thing. This clears theextra gasoline from the engine.Do not race the engineimmediately after starting it.Operate the engine andtransmission gently until the oilwarms up and lubricates allmoving parts.

Starting Procedure (KeylessAccess)

1. If the vehicle has the keylessaccess system, the transmittermust be in the vehicle. Put yourfoot on the brake pedal andpush the ENGINE START/STOPbutton. When the engine beginscranking, let go of the button.

The idle speed will go down asyour engine gets warm. Do notrace the engine immediatelyafter starting it. Operate theengine and transmission gentlyto allow the oil to warm up andlubricate all moving parts.

If the transmitter is not in thevehicle or something isinterfering with the transmitter,the Driver Information Center(DIC) will display a message.See Remote Keyless Entry(RKE) System Operation onpage 2-3 and Key and LockMessages on page 5-43.

If the battery in the RemoteKeyless Entry (RKE) transmitterneeds replacing, a DIC messagedisplays. The vehicle can still bedriven. See “Starting the Vehiclewith a Low Transmitter Battery”in Remote Keyless Entry (RKE)System Operation on page 2-3.

The vehicle has aComputer-Controlled CrankingSystem. This feature assists instarting the engine and protectscomponents. If the ENGINESTART/STOP button is pressed,and then released when theengine begins cranking, theengine will continue cranking fora few seconds or until thevehicle starts. If the engine doesnot start and the button ispressed for many seconds,cranking will be stopped after15 seconds to prevent crankingmotor damage. To prevent geardamage, this system alsoprevents cranking if the engineis already running. Engine



cranking can be stopped bypressing the ENGINE START/STOP button a second time.

{ Caution

Cranking the engine for longperiods of time, by pressing theENGINE START/STOP buttonimmediately after cranking hasended, can overheat and damagethe cranking motor, and drain thebattery. Wait at least 15 secondsbetween each try, to let thecranking motor cool down.

2. If the engine does not start afterfive to 10 seconds, especially invery cold weather (below −18°Cor 0°F), it could be flooded withtoo much gasoline. Try pushingthe accelerator pedal all the wayto the floor and holding it thereas you press the ENGINESTART/STOP button, for up to amaximum of 15 seconds. Wait atleast 15 seconds between eachtry, to allow the cranking motor

to cool down. When the enginestarts, let go of the button, andthe accelerator. If the vehiclestarts briefly but then stopsagain, do the same thing. Thisclears the extra gasoline fromthe engine. Do not race theengine immediately after startingit. Operate the engine andtransmission gently until the oilwarms up and lubricates allmoving parts.

eAssist Automatic EngineStart/Stop

{ Warning

Exiting the vehicle without firstshifting into P (Park) may causethe vehicle to move. You or othersmay be injured. Because thevehicle has the automatic enginestart/stop feature, the vehicle'sengine might seem to be shut off;

(Continued)

Warning (Continued)

however, once the brake pedal isreleased, the engine will start upagain.

Shift to P (Park) and turn theignition to LOCK/OFF, beforeexiting the vehicle.

Vehicles with eAssist have anautomatic engine start/stop feature.After the engine is started and hasreached operating temperature, theauto stop feature may cause theengine to turn off when the brakesare applied and the vehicle comesto a complete stop. The vehicle mayremain in auto stop for up totwo minutes. When the brake isreleased or the accelerator pedal isapplied, the engine will start. Theengine will continue to run until thenext auto stop.



AUTO STOP on the tachometersignifies that the engine is in autostop mode. See Tachometer onpage 5-16. When the vehicle isturned off, the tachometer will moveto OFF. If the driver door is openedwhile in auto stop mode, a chimewill sound.

To restart the engine during autostop, release the brake pedal orpress the accelerator pedal. Theengine starts immediately. Thevehicle continues to run until thenext stop.

There are several conditions whichmay prevent an auto stop or causean auto start.

The Engine Will RemainRunning When:. The engine, transmission,

or high voltage battery is notwarmed up yet.

. The outside temperature is lessthan −20°C (−4°F).

. The air conditioning or defrostsystem need the compressor tomaintain vehicle comfort. SeeDual Automatic Climate ControlSystem on page 8-1 The warmerit is outside, the shorter the timebefore the engine is restarted toprovide cabin cooling. Tomaximize fuel economy, use theeco air conditioning mode.

. The shift lever is in P (Park),N (Neutral), R (Reverse),or M (Manual Mode).

. The high voltage battery packcharge is low.

. The hood is not fully closed.

. Brake pedal pressure is low.

. If the Malfunction Indicator Lamp(MIL) is on, auto stop may beprevented.

. High humidity is detected.

The Engine Will Restart When:. The brake pedal is released.. The accelerator pedal is applied.

. Shifting out of D (Drive) to anyother gear.

. The air conditioning or defrostsystem need the compressor tomaintain vehicle comfort. SeeDual Automatic Climate ControlSystem on page 8-1. Thewarmer it is outside, the shorterthe time before the engine isrestarted to provide cabincooling. To maximize fueleconomy, use the eco airconditioning mode.

. The climate control system isturned from off to normal airconditioning or defrost. See DualAutomatic Climate ControlSystem on page 8-1.

. The engine is required to run foreither heater or climate controlperformance. See DualAutomatic Climate ControlSystem on page 8-1.

. The high voltage battery packcharge is low and requiresrecharging.



. Auto stop time is greater thantwo minutes.

. The hood is opened.

Engine HeaterThe engine coolant heater,if available, can help in cold weatherconditions at or below −18°C (0°F)for easier starting and better fueleconomy during engine warm-up.Plug in the coolant heater at leastfour hours before starting thevehicle. An internal thermostat inthe plug-end of the cord will preventengine coolant heater operation attemperatures above −18°C (0°F).

To Use the Engine CoolantHeater

1. Turn off the engine.

2. Open the hood and unwrap theelectrical cord.

The electrical cord is located onthe passenger side of the enginecompartment, between thefender and the air cleaner.

3. Plug it into a normal, grounded110-volt AC outlet.

{ Warning

Plugging the cord into anungrounded outlet could cause anelectrical shock. Also, the wrongkind of extension cord couldoverheat and cause a fire. Youcould be seriously injured. Plugthe cord into a properly groundedthree-prong 110-volt AC outlet.If the cord will not reach, use aheavy-duty three-prong extensioncord rated for at least 15 amps.

4. Before starting the engine, besure to unplug and store thecord as it was before to keep itaway from moving engine parts.

The length of time the heater shouldremain plugged in depends onseveral factors. Ask a dealer in thearea where you will be parking thevehicle for the best advice on this.



Retained AccessoryPower (RAP)These vehicle accessories can beused for up to 10 minutes after theengine is turned off:. Audio System. Power Windows. Sunroof (If Equipped). Auxiliary Power Outlet

Power to the audio system willcontinue to operate for up to10 minutes or until the driver door isopened.

Power to the power windows andsunroof will continue to operate forup to 10 minutes or until any door isopened.

All of these features will work whenthe ignition is in ON/RUN or ACC/ACCESSORY.

Shifting Into ParkUse this procedure to shift intoP (Park):

1. Hold the brake pedal down andset the parking brake.

See Parking Brake onpage 9-33.

2. Hold the button on the shift leverand push the lever toward thefront of the vehicle into P (Park).


4. Remove the key.

Leaving the Vehicle with theEngine Running

{ Warning

It can be dangerous to leave thevehicle with the engine running.It could overheat and catch fire.

(Continued)

Warning (Continued)

It is dangerous to get out of thevehicle if the shift lever is not fullyin P (Park) with the parking brakefirmly set. The vehicle can roll.

Do not leave the vehicle when theengine is running. If you have leftthe engine running, the vehiclecan move suddenly. You or otherscould be injured. To be sure thevehicle will not move, even whenyou are on fairly level ground,always set the parking brake andmove the shift lever to P (Park).See Shifting Into Park onpage 9-24.

If you have to leave the vehicle withthe engine running, the vehicle mustbe in P (Park) and the parkingbrake set.

Release the button and check thatthe shift lever cannot be moved outof P (Park).



Torque Lock

Torque lock is when the weight ofthe vehicle puts too much force onthe parking pawl in thetransmission. This happens whenparking on a hill and shifting thetransmission into P (Park) is notdone properly; then it is difficult toshift out of P (Park). To preventtorque lock, set the parking brakeand then shift into P (Park). To findout how, see “Shifting Into Park”listed previously.

If torque lock does occur, thevehicle may need to be pusheduphill by another vehicle to relievethe parking pawl pressure, so youcan shift out of P (Park).

Shifting out of Park(Automatic Transmission)This vehicle is equipped with anelectronic shift lock release system.The shift lock release isdesigned to:. Prevent ignition key removal

unless the shift lever is inP (Park) with the shift leverbutton fully released.

. Prevent movement of the shiftlever out of P (Park) unless theignition is in ON/RUN and thebrake pedal is applied.

The shift lock release is alwaysfunctional except in the case of anuncharged or low voltage (less than9‐volt) battery.

If the vehicle has an unchargedbattery or a battery with low voltage,try charging or jump starting thebattery. See Jump Starting (with orwithout eAssist) on page 10-79 orJump Starting (On-board witheAssist Only) on page 10-77

To shift out of P (Park):

1. Apply the brake pedal.

2. Turn the ignition to ON/RUN.

3. Press the shift lever button.

4. Move the shift lever to thedesired position.

If still unable to shift out of P (Park):

1. Fully release the shift leverbutton.

2. Hold the brake pedal down andpress the shift lever buttonagain.

3. Move the shift lever to thedesired position.

If you still cannot move the shiftlever from P (Park), consult yourdealer or a professional towingservice.

ParkingIf the vehicle has a manualtransmission, before getting out ofthe vehicle, move the shift lever intoR (Reverse) if parking on a downhill



slope. On a level surface or anuphill slope, use 1 (First) gear.Firmly apply the parking brake. Turnthe wheels toward the curb for adownhill slope, or away from thecurb for an uphill slope. Once theshift lever has been placed into gearwith the clutch pedal pressed in,turn the ignition key to LOCK/OFF,remove the key, and release theclutch.

Parking over ThingsThat Burn

{ Warning

Things that can burn could touchhot exhaust parts under thevehicle and ignite. Do not parkover papers, leaves, dry grass,or other things that can burn.

Engine Exhaust

{ Warning

Engine exhaust contains carbonmonoxide (CO) which cannot beseen or smelled. Exposure to COcan cause unconsciousness andeven death.

Exhaust may enter the vehicle if:. The vehicle idles in areaswith poor ventilation (parkinggarages, tunnels, deep snowthat may block underbodyairflow or tail pipes).

. The exhaust smells orsounds strange or different.

. The exhaust system leaksdue to corrosion or damage.

. The vehicle exhaust systemhas been modified, damaged,or improperly repaired.

(Continued)

Warning (Continued)

. There are holes or openingsin the vehicle body fromdamage or aftermarketmodifications that are notcompletely sealed.

If unusual fumes are detected orif it is suspected that exhaust iscoming into the vehicle:

. Drive it only with the windowscompletely down.

. Have the vehicle repairedimmediately.

Never park the vehicle with theengine running in an enclosedarea such as a garage or abuilding that has no fresh airventilation.

Running the VehicleWhile ParkedIt is better not to park with theengine running.



If the vehicle is left with the enginerunning, follow the proper steps tobe sure the vehicle will not move.See Shifting Into Park on page 9-24and Engine Exhaust on page 9-26.If the vehicle has a manualtransmission, see Parking onpage 9-25.

AutomaticTransmission

The mode or selected gear is shownin the instrument cluster.

P (Park): This position locks thedrive wheels. It is the best positionto use when starting the enginebecause the vehicle cannot moveeasily.

{ Warning

It is dangerous to get out of thevehicle if the shift lever is not fullyin P (Park) with the parking brakefirmly set. The vehicle can roll.

Do not leave the vehicle when theengine is running. If you have leftthe engine running, the vehiclecan move suddenly. You or otherscould be injured. To be sure thevehicle will not move, even whenyou are on fairly level ground,always set the parking brake andmove the shift lever to P (Park).See Shifting Into Park onpage 9-24.

Make sure the shift lever is fully inP (Park) before starting the engine.The vehicle has an automatictransmission shift lock controlsystem. The regular brake must befully applied first and then the shiftlever button pressed before shiftingfrom P (Park) when the ignition key



is in ON/RUN. If you cannot shift outof P (Park), ease pressure on theshift lever, then push the shift leverall the way into P (Park) as youmaintain brake application. Thenpress the shift lever button andmove the shift lever into anothergear. See Shifting out of Park(Automatic Transmission) onpage 9-25.

Without the brake pedal applied, thecontrol indicator will be on.

If the shift lever is not in P (Park)when the ignition is turned to OFF,the control indicator and P will flash.

R (Reverse): Use this gear toback up.

{ Caution

Shifting to R (Reverse) while thevehicle is moving forward coulddamage the transmission. Therepairs would not be covered bythe vehicle warranty. Shift toR (Reverse) only after the vehicleis stopped.

To rock the vehicle back and forth toget out of snow, ice, or sand withoutdamaging the transmission, see Ifthe Vehicle Is Stuck on page 9-10.

N (Neutral): In this position, theengine does not connect with thewheels. To restart the engine whenthe vehicle is already moving, useN (Neutral) only with the brake pedalapplied.

{ Warning

Shifting into a drive gear while theengine is running at high speed isdangerous. Unless your foot isfirmly on the brake pedal, thevehicle could move very rapidly.You could lose control and hitpeople or objects. Do not shiftinto a drive gear while the engineis running at high speed.

{ Caution

Shifting out of P (Park) orN (Neutral) with the enginerunning at high speed maydamage the transmission. Therepairs would not be covered bythe vehicle warranty. Be sure theengine is not running at highspeed when shifting the vehicle.



D (Drive): This position is fornormal driving. It provides the bestfuel economy. If more power isneeded for passing, and thevehicle is:. Going less than 56 km/h

(35 mph), push the acceleratorpedal about halfway down.

. Going about 56 km/h (35 mph) ormore, push the accelerator allthe way down.

{ Caution

If the vehicle accelerates slowly,or does not shift gears, thetransmission could be damaged.Have the vehicle servicedright away.

Manual Mode

Driver Shift Control (DSC)

{ Caution

Driving with the engine at a highrpm without upshifting while usingDriver Shift Control (DSC), coulddamage the vehicle. Alwaysupshift when necessary whileusing DSC.

DSC allows you to shift anautomatic transmission similar to amanual transmission. To use theDSC feature:

1. Move the shift lever to the leftfrom D (Drive) into the side gatemarked with (+) and (−).

2. Press the shift lever forward toupshift or rearward to downshift.

While using the DSC feature, thevehicle will have firmer, quickershifting. You can use this for sportdriving or when climbing ordescending hills, to stay in gearlonger, or to downshift for morepower or engine braking.

The transmission will only allow youto shift into gears appropriate for thevehicle speed and enginerevolutions per minute (rpm). Thetransmission will not automaticallyshift to the next lower gear if theengine rpm is too high, nor to thenext higher gear when the maximumengine rpm is reached.



While in the DSC mode, thetransmission will automaticallydownshift when the vehicle comesto a stop. This will allow for morepower during take-off.

When accelerating the vehicle froma stop in snowy and icy conditions,you may want to shift into secondgear. A higher gear allows thevehicle to gain more traction onslippery surfaces. Vehicles with aturbocharged engine may also startin third gear.

Manual Transmission

This is the shift pattern for the6-speed manual transmission.

To operate the transmission:

{ Caution

Do not rest your hand on the shiftlever while driving. The pressurecould cause premature wear inthe transmission. The repairswould not be covered by thevehicle warranty.

{ Caution

Do not rest your foot on the clutchpedal while driving or whilestopped. The pressure can causepremature wear in the clutch. Therepairs would not be covered bythe vehicle warranty.

1 (First): Press the clutch pedalfully to the pedal stop and shift into1 (First). Then slowly let up on theclutch pedal as you press theaccelerator pedal.

If you come to a complete stop andit is hard to shift into 1 (First), putthe shift lever in Neutral and let upon the clutch. Press the clutch pedalback down. Then shift into 1 (First).

2 (Second): Press the clutch pedalas you let up on the acceleratorpedal and shift into 2 (Second).Then, slowly let up on the clutchpedal as you press the acceleratorpedal.



3 (Third), 4 (Fourth), 5 (Fifth), and6 (Sixth): Shift into 3 (Third),4 (Fourth), 5 (Fifth), and 6 (Sixth) thesame way you do for 2 (Second).Slowly let up on the clutch pedal asyou press the accelerator pedal. Forthe best fuel economy, use 6 (Sixth)gear whenever vehicle speed anddriving conditions allow.

The vehicle may have an up-shiftlight in the instrument cluster. SeeUp-Shift Light on page 5-26.

{ Warning

If you skip a gear whendownshifting, you could losecontrol of the vehicle. You couldinjure yourself or others. Do notshift down more than one gear ata time when downshifting.

{ Caution

Do not rest your foot on the clutchpedal while driving or whilestopped. The pressure can causepremature wear in the clutch. Therepairs would not be covered bythe vehicle warranty.

To stop, let up on the acceleratorpedal and press the brake pedal.Just before the vehicle stops, pressthe clutch pedal and the brakepedal, and shift to Neutral.

Neutral: Use this position whenyou start or idle the engine. Theshift lever is in Neutral when it iscentered in the shift pattern, not inany gear.

R (Reverse): To back up, with thevehicle at a complete stop, pressdown the clutch pedal. Then pull upon the button on the shift lever, andshift into R (Reverse). Let up on theclutch pedal slowly while pressingthe accelerator pedal. If R (Reverse)

gear does not engage, shift thetransmission to Neutral, release theclutch pedal, and press it backdown. Repeat the gear selection.

{ Caution

Shifting to R (Reverse) while thevehicle is moving forward coulddamage the transmission. Therepairs would not be covered bythe vehicle warranty. Shift toR (Reverse) only after the vehicleis stopped.

Use R (Reverse) along with theparking brake to park the vehicle.

When operating, press the clutchpedal down completely. Do not usethe pedal as a foot rest.



Some vehicles have a DriverInformation Center (DIC) with anECO Drive Assist Menu thatcontains a shift indicator. See DriverInformation Center (DIC) (BaseLevel Cluster) on page 5-33 orDriver Information Center (DIC)(Uplevel Cluster) on page 5-35.

Drive Systems

All-Wheel DriveIf equipped, this feature transferstorque to the rear wheels asrequired. It is fully automatic, andadjusts itself as needed for roadconditions.

All-Wheel Drive (AWD) performanceis automatically reduced when youuse the compact spare. To restorefull AWD performance, and preventexcessive wear to the clutch in theAWD system, replace the compactspare tire with a full-size tire assoon as possible. See CompactSpare Tire on page 10-76.

Brakes

Antilock BrakeSystem (ABS)This vehicle has ABS, an advancedelectronic braking system that helpsprevent a braking skid.

When the vehicle begins to driveaway, ABS checks itself.A momentary motor or clicking noisemight be heard while this test isgoing on, and it might even benoticed that the brake pedal movesa little. This is normal.

If there is a problem with ABS, thiswarning light stays on. See AntilockBrake System (ABS) Warning Lighton page 5-25.



If driving safely on a wet road and itbecomes necessary to slam on thebrakes and continue braking toavoid a sudden obstacle, acomputer senses the wheels areslowing down. If one of the wheelsis about to stop rolling, the computerwill separately work the brakes ateach wheel.

ABS can change the brake pressureto each wheel, as required, fasterthan any driver could. This can helpyou steer around the obstacle whilebraking hard.

As the brakes are applied, thecomputer keeps receiving updateson wheel speed and controlsbraking pressure accordingly.

Remember: ABS does not changethe time needed to get a foot up tothe brake pedal or always decreasestopping distance. If you get tooclose to the vehicle in front of you,there will not be enough time toapply the brakes if that vehicle

suddenly slows or stops. Alwaysleave enough room up ahead tostop, even with ABS.

Using ABS

Do not pump the brakes. Just holdthe brake pedal down firmly and letABS work. You may hear the ABSpump or motor operating and feelthe brake pedal pulsate. This isnormal.

Braking in Emergencies

ABS allows you to steer and brakeat the same time. In manyemergencies, steering can helpmore than even the very bestbraking.

Parking Brake

The Electric Parking Brake (EPB)switch is on the center console. TheEPB can always be activated, evenif the ignition is off. To preventdraining the battery, avoid repeatedcycles of the EPB when the engineis not running.

The system has a red parking brakestatus light and an amber parkingbrake warning light. See ElectricParking Brake Light on page 5-24and Service Electric Parking BrakeLight on page 5-25. There are also



parking brake-related DriverInformation Center (DIC) messages.See Brake System Messages onpage 5-39. In case of insufficientelectrical power, the EPB cannot beapplied or released.

Before leaving the vehicle, checkthe red parking brake status light toensure that the parking brake isapplied.

EPB Apply

To apply the EPB:

1. Be sure the vehicle is at acomplete stop.

2. Lift up the EPB switchmomentarily.

The red parking brake status lightwill flash and then stay on once theEPB is fully applied. If the redparking brake status light flashescontinuously, then the EPB is onlypartially applied or there is aproblem with the EPB. A DICmessage will display. Release theEPB and try to apply it again. If thelight does not come on, or keeps

flashing, have the vehicle serviced.Do not drive the vehicle if the redparking brake status light is flashing.See your dealer. See ElectricParking Brake Light on page 5-24.

If the amber parking brake warninglight is on, lift up on the EPB switchand hold it up. Continue to hold theswitch until the red parking brakestatus light remains on. If the amberparking brake warning light remainson, see your dealer.

If the EPB is applied while thevehicle is moving, the vehicle willdecelerate as long as the switch isheld up. If the switch is held up untilthe vehicle comes to a stop, theEPB will remain applied.

The vehicle may automatically applythe EPB in some situations whenthe vehicle is not moving. This isnormal, and is done to periodicallycheck the correct operation of theEPB system.

If the EPB fails to apply, the rearwheels should be blocked toprevent vehicle movement.

EPB Release

To release the EPB:

1. Place the ignition in the ACC/ACCESSORY or ON/RUNposition.

2. Apply and hold the brake pedal.

3. Push down momentarily on theEPB switch.

The EPB is released when the redparking brake status light is off.

If the amber parking brake warninglight is on, release the EPB bypushing down on the EPB switchand holding it down. Continue tohold the switch until the red parkingbrake status light is off. If either lightstays on after release is attempted,see your dealer.

{ Caution

Driving with the parking brake oncan overheat the brake systemand cause premature wear or

(Continued)



Caution (Continued)

damage to brake system parts.Make sure that the parking brakeis fully released and the brakewarning light is off before driving.

Automatic EPB Release

The EPB will automatically release ifthe vehicle is running, placed intogear, and an attempt is made todrive away. Avoid rapid accelerationwhen the EPB is applied, topreserve parking brake lining life.

The EPB can also be used toprevent roll back for vehicles with amanual transmission taking off on ahill. When no roll back is desired, anapplied EPB will allow both feet tobe used for the clutch andaccelerator pedals in preparation forstarting the vehicle moving in theintended direction. In this case,there is no need to push the switchto release the EPB.

Brake AssistThe Brake Assist feature isdesigned to assist the driver instopping or decreasing vehiclespeed in emergency drivingconditions. This feature uses thestability system hydraulic brakecontrol module to supplement thepower brake system underconditions where the driver hasquickly and forcefully applied thebrake pedal in an attempt to quicklystop or slow down the vehicle. Thestability system hydraulic brakecontrol module increases brakepressure at each corner of thevehicle until the ABS activates.Minor brake pedal pulsation orpedal movement during this time isnormal and the driver shouldcontinue to apply the brake pedal asthe driving situation dictates TheBrake Assist feature willautomatically disengage when thebrake pedal is released or brakepedal pressure is quicklydecreased.

Hill Start Assist (HSA)If equipped, Hill Start Assist (HSA)may be useful when the vehicle isstopped on a grade. This feature isdesigned to prevent the vehicle fromrolling, either forward or rearward,during vehicle drive off. After thedriver completely stops and holdsthe vehicle in a complete standstillon a grade, HSA will beautomatically activated. During thetransition period between when thedriver releases the brake pedal andstarts to accelerate to drive off on agrade, HSA holds the brakingpressure to ensure that there is norolling. The brakes will automaticallyrelease when the accelerator pedalis applied within the two-secondwindow. It will not activate if thevehicle is in a drive gear and facingdownhill or if the vehicle is facinguphill and in R (Reverse).



Ride Control Systems

Traction Control/Electronic StabilityControl

System Operation

The vehicle has a Traction ControlSystem (TCS) and StabiliTrak®, anelectronic stability control system.These systems help limit wheel slipand assist the driver in maintainingcontrol, especially on slippery roadconditions.

TCS activates if it senses that anyof the drive wheels are spinning orbeginning to lose traction. When thishappens, TCS applies the brakes tothe spinning wheels and reducesengine power to limit wheel spin.

StabiliTrak activates when thevehicle senses a difference betweenthe intended path and the directionthe vehicle is actually traveling.StabiliTrak selectively appliesbraking pressure to any one of the

vehicle wheel brakes to assist thedriver in keeping the vehicle on theintended path.

If cruise control is being used andtraction control or StabiliTrak beginsto limit wheel spin, cruise control willdisengage. Cruise control may beturned back on when roadconditions allow.

Both systems come onautomatically when the vehicle isstarted and begins to move. Thesystems may be heard or felt whilethey are operating or whileperforming diagnostic checks. Thisis normal and does not mean thereis a problem with the vehicle.

It is recommended to leave bothsystems on for normal drivingconditions, but it may be necessaryto turn TCS off if the vehicle getsstuck in sand, mud, ice, or snow.See If the Vehicle Is Stuck onpage 9-10 and “Turning theSystems Off and On” later in thissection.

The indicator light for both systemsis in the instrument cluster. Thislight will:. Flash when TCS is limiting

wheel spin.. Flash when StabiliTrak is

activated.. Turn on and stay on when either

system is not working.

If either system fails to turn on or toactivate, a message displays in theDriver Information Center (DIC), andd comes on and stays on toindicate that the system is inactiveand is not assisting the driver inmaintaining control. The vehicle issafe to drive, but driving should beadjusted accordingly.



If d comes on and stays on:

1. Stop the vehicle.

2. Turn the engine off and wait15 seconds.

3. Start the engine.

Drive the vehicle. If d comes onand stays on, the vehicle may needmore time to diagnose the problem.If the condition persists, see yourdealer.

Turning the Systems Offand On

To turn the system off, press theTCS/StabiliTrak button on the centerstack.

{ Caution

Do not repeatedly brake oraccelerate heavily when TCS isoff. The vehicle driveline could bedamaged.

To turn off only TCS, press andrelease the TCS/StabiliTrak gbutton. The traction off light idisplays in the instrument cluster.The appropriate message displaysin the DIC. See Ride ControlSystem Messages on page 5-45.

To turn TCS on again, press andrelease the TCS/StabiliTrak gbutton. The traction off light idisplayed in the instrument clusterwill turn off.

If TCS is limiting wheel spin whenthe TCS/StabiliTrak button ispressed, the system will not turn offuntil the wheels stop spinning.

To turn off both TCS and StabiliTrak,press and hold the TCS/StabiliTrakg button until the traction off light iand StabiliTrak OFF Light g comeon and stay on in the instrumentcluster. The appropriate messagedisplays in the DIC. See RideControl System Messages onpage 5-45.

To turn TCS and StabiliTrak onagain, press and release the TCS/StabiliTrak button. The traction offlight i and StabiliTrak OFF Light gin the instrument cluster turn off.

Adding accessories can affect thevehicle performance. SeeAccessories and Modifications onpage 10-3.



Selective Ride ControlThe vehicle may have SelectiveRide Control. The SPORT and GSbuttons are on top of the centerstack. Selective Ride Control adaptsto the preference of the driver withinone of three driving modes:

Standard: Default mode used fornormal and long-distance highwaydriving. This setting provides asmooth soft ride.

Sport: Use for normal city andlong-distance highway driving. Thissetting provides precise,comfortable handling. Press andrelease the SPORT button on top ofthe center stack and the light on thebutton comes on. Press the buttonagain and the system returns to theStandard mode.

GS: Use where personalpreference or road conditionsdemand more control. This settingprovides responsive, controlledsteering and handling and alsomodifies the All-Wheel Drive (AWD).Press and release the GS button on

top of the center stack. The light onthe button comes on, and theappropriate message displays onthe DIC. Press the button again.The system returns to the Standardmode and the appropriate messagedisplays on the DIC.

Selective Ride Control automaticallycomes on in the Standard modewhen the vehicle is started. Whenthe Sport and GS modes are turnedoff, the system returns to theStandard mode.

Standard Mode. The powertrain reacts normally

to the accelerator pedal.. Power steering assistance is

normal.

Sport Mode. The shock absorbers stiffen to

provide better contact with theroad surface.

. The powertrain reacts normallyto the accelerator pedal.

. Power steering assistance isnormal.

GS Mode. Additional stiffness in the shock

absorbers for increased bodycontrol.

. The powertrain reacts morequickly to the accelerator pedal.

. Power steering assistance isreduced.



Cruise ControlWith cruise control the vehicle canmaintain a speed of about 40 km/h(25 mph) or more without keepingyour foot on the accelerator. Cruisecontrol does not work at speedsbelow 40 km/h (25 mph).

{ Warning

Cruise control can be dangerouswhere you cannot drive safely ata steady speed. Do not use thecruise control on winding roads orin heavy traffic.

Cruise control can be dangerouson slippery roads. On such roads,fast changes in tire traction cancause excessive wheel slip, andyou could lose control. Do not usecruise control on slippery roads.

If equipped with the Traction ControlSystem (TCS), the system maybegin to limit wheel spin while youare using cruise control. If this

happens, the cruise control willautomatically disengage. SeeTraction Control/Electronic StabilityControl on page 9-36. If a collisionalert occurs when cruise control isactivated, cruise control isdisengaged. See Forward CollisionAlert (FCA) System on page 9-52.When road conditions allow you tosafely use it again, the cruisecontrol can be turned back on.

If the brakes are applied, the cruisecontrol disengages.

5 (On/Off): Press to turn cruisecontrol on or off. A white indicatorcomes on in the instrument cluster.

RES/+ (Resume/Accelerate):Press the control up briefly to makethe vehicle resume to a previouslyset speed, or hold upwards toaccelerate. If cruise control isalready active, use to increasevehicle speed.

SET/− (Set/Coast): Press thecontrol down briefly to set the speedand activate cruise control. If cruisecontrol is already active, use todecrease vehicle speed.

* (Cancel): Press to disengagecruise control without erasing theselected set speed.

Setting Cruise Control

If the cruise button is on when not inuse, it could get bumped and go intocruise when not desired. Keep thecruise control switch off when cruiseis not being used.



1. Press the 5 button to turn thecruise system on.

2. Get to the speed desired.

3. Press and release the SET/−control on the steering wheel .The desired set speed brieflyappears in the instrument panelcluster.

4. Remove foot from theaccelerator.

The cruise control indicator on theinstrument cluster turns green aftercruise control has been set to thedesired speed. See InstrumentCluster (Base Cluster) on page 5-9or Instrument Cluster (UplevelCluster) on page 5-13.

Resuming a Set Speed

If the cruise control is set at adesired speed and then the brakesare applied or the* is pressed, thecruise control is disengaged withouterasing the set speed from memory.

Once the vehicle reaches about40 km/h (25 mph) or more, pressRES/+ up briefly. The vehiclereturns to the previous set speed.

Increasing Speed While UsingCruise Control

If the cruise control system isalready activated:. Press and hold RES/+ up until

the vehicle accelerates to thedesired speed, then release it.

. To increase the speed in smallincrements, press RES/+ upbriefly. Each time this is done,the vehicle goes about 1.6 km/h(1 mph) faster.

Reducing Speed While UsingCruise Control

If the cruise control system isalready activated:. Press and hold SET/− down until

the desired lower speed isreached, then release it.

. To slow down in smallincrements, press SET/− downbriefly. Each time this is done,the vehicle goes about 1.6 km/h(1 mph) slower.

Passing Another Vehicle WhileUsing Cruise Control

Use the accelerator pedal toincrease vehicle speed. When youtake your foot off the pedal, thevehicle will slow down to the cruisespeed you set earlier. Whilepressing the accelerator pedal orshortly following the release tooverride cruise control, brieflypressing SET− will result in cruiseset to the current vehicle speed.

Using Cruise Control on Hills

How well the cruise control will workon hills depends upon the vehiclespeed, load, and the steepness ofthe hills. When going up steep hills,you might have to step on theaccelerator pedal to maintain yourspeed. When going downhill, youmight have to brake or shift to a



lower gear to keep your speeddown. If the brakes are applied thecruise control will disengage.

Ending Cruise Control

There are three ways to end cruisecontrol:. To disengage cruise control,

step lightly on the brake pedal orclutch.

. Press* on the steering wheel.

. To turn off the cruise control,press5 on the steering wheel.

Erasing Speed Memory

The cruise control set speed iserased from memory by pressing 5or if the ignition is turned off.

Adaptive Cruise ControlIf equipped with Adaptive CruiseControl (ACC), it allows the driver toselect the cruise control set speedand following gap. Read this entiresection before using this system.The following gap is the following

time between your vehicle and avehicle detected directly ahead inyour path, moving in the samedirection. If no vehicle is detected inyour path, ACC works like regularcruise control. ACC uses a radarsensor . See Radio FrequencyStatement on page 13-15.

If a vehicle is detected in your path,ACC can apply acceleration orlimited, moderate braking tomaintain the selected following gap.To disengage ACC, apply the brake.If ACC is controlling your vehiclespeed when the traction controlsystem (TCS) or electronic stabilitycontrol system activates, the ACCmay automatically disengage. SeeTraction Control/Electronic StabilityControl on page 9-36. When roadconditions allow ACC to be safelyused, the ACC can be turnedback on.

ACC will not engage if the TCS orelectronic stability control system isdisabled.

{ Warning

ACC has limited braking abilityand may not have time to slowthe vehicle down enough to avoida collision with another vehicleyou are following. This can occurwhen vehicles suddenly slow orstop ahead, or enter your lane.Also see “Alerting the Driver” inthis section. Complete attention isalways required while driving andyou should be ready to takeaction and apply the brakes. SeeDefensive Driving on page 9-3.

{ Warning

Adaptive Cruise Control will notdetect or brake for children,pedestrians, animals, or otherobjects.

(Continued)



Warning (Continued)

Do not use Adaptive CruiseControl when:

. On winding and hilly roads orwhen the sensors areblocked by snow, ice, or dirt.The system may not detect avehicle ahead. Keep theentire front of the vehicleclean.

. Visibility is low, such as infog, rain, or snow conditions.Adaptive Cruise Controlperformance is limited underthese conditions.

. On slippery roads where fastchanges in tire traction cancause excessive wheel slip.

] (On/Off): Press to turn thesystem on or off. The indicator turnswhite on the instrument clusterwhen ACC is turned on.

+RES (Resume/Accelerate):Press the control up briefly to makethe vehicle resume to a previouslyset speed, or hold upwards toaccelerate. If cruise control isalready active, use to increasevehicle speed.

SET– (Set/Coast): Press thecontrol down briefly to set the speedand activate ACC. If cruise control isalready active, use to decreasevehicle speed.

* (Cancel): Press to disengageACC without erasing the selectedset speed.

3 (Follow Distance Gap): Pressto select a following gap time (ordistance) setting for ACC of Far,Medium, or Near.

Setting Adaptive Cruise Control

If the cruise button is on when not inuse, it could get pressed and go intocruise when not desired. Keep thecruise control button off when cruiseis not being used.

Select the set speed desired forcruise. This is the vehicle speedwhen no vehicle is detected inits path.

ACC will not set at a speed lessthan 25 km/h (16 mph), although itcan be resumed when driving atlower speeds.



To set ACC:

1. Press].

2. Get up to the desired speed.

3. Press and release the SET–control on the steering wheel.

4. Remove foot from theaccelerator.

After ACC is set, it may immediatelyapply the brakes if a vehicle aheadis detected closer than the selectedfollowing gap.

The ACC indicator displays on theinstrument cluster. When ACC isactive, the indicator turns green.

Be mindful of speed limits,surrounding traffic speeds, andweather conditions when selectingthe set speed.

Resuming a Set Speed

If the ACC is set at a desired speedand then the brakes are applied,ACC is disengaged without erasingthe set speed from memory.

To begin using ACC again, press+RES up briefly on the steeringwheel. The vehicle returns to theprevious set speed.

Increasing Speed While ACC is ata Set Speed

If ACC is already activated, do oneof the following:. Use the accelerator to get to the

higher speed. Press SET– down.Release the control and theaccelerator pedal. The vehiclewill now cruise at the higherspeed.

When the accelerator pedal ispressed, ACC will not brakebecause it is overridden.A warning message will appearon the Driver Information Center(DIC). See Cruise ControlMessages on page 5-40.

. Press and hold +RES up untilthe desired set speed appearson the display, then release it.

. To increase vehicle speed insmall increments, briefly press+RES. For each press, thevehicle goes to the next 5 km/h(1 mph) faster mark on thespeedometer.

When it is determined that there isno vehicle ahead or the vehicleahead is beyond the selectedfollowing gap, then the vehiclespeed will increase to the set speed.

The speedometer reading can bedisplayed in either English or metricunits. See Instrument Cluster (BaseCluster) on page 5-9 or InstrumentCluster (Uplevel Cluster) onpage 5-13. The increment valueused depends on the unitsdisplayed.



Reducing Speed While ACC is at aSet Speed

If ACC is already activated, do oneof the following:. Use the brake to get to the

desired lower speed. PressSET– down and release theaccelerator pedal. The vehiclewill now cruise at the lowerspeed.

. Press and hold SET– down untilthe desired lower speed isreached, then release it.

. To decrease the vehicle speed insmall increments, briefly pressSET−. For each press, thevehicle goes to the next 5 km/h(1 mph) slower mark on thespeedometer.

The speedometer reading can bedisplayed in either English or metricunits. See Instrument Cluster (BaseCluster) on page 5-9 or InstrumentCluster (Uplevel Cluster) onpage 5-13. The increment valueused depends on the unitsdisplayed.

Selecting the Follow Distance Gap

When a slower moving vehicle isdetected ahead within the selectedfollowing gap, ACC will adjust thevehicle's speed and attempt tomaintain the follow distance gapselected.

Press3 on the steering wheel toadjust the following gap. Whenpressed, the current gap settingdisplays briefly on the instrumentcluster. Subsequent presses cyclethe gap button through threesettings: Far, Medium, or Near.

Since each gap setting correspondsto a following time (Far, Medium,or Near), the following distance willvary based on vehicle speed. The

faster the vehicle speed, the furtherback your vehicle will follow avehicle detected ahead. Considertraffic and weather conditions whenselecting the following gap. Therange of selectable gaps may not beappropriate for all drivers anddriving conditions.

Changing the gap settingautomatically changes the alerttiming sensitivity (Far, Medium,or Near) for the Forward CollisionAlert (FCA) feature. See ForwardCollision Alert (FCA) System onpage 9-52.

Alerting the Driver

If ACC is engaged, driver actionmay be required when ACC cannotapply sufficient braking because ofapproaching a vehicle too rapidly.



When this condition occurs, thecollision alert will display on theinstrument cluster and eight beepswill sound from the front.

See Defensive Driving on page 9-3.

Approaching and Following aVehicle

The vehicle ahead symbol is in theinstrument cluster.

The vehicle ahead symbol onlydisplays when a vehicle is detectedin your vehicle’s path moving in thesame direction.

If this symbol is not displaying, ACCwill not respond to or brake tovehicles ahead.

ACC automatically slows the vehicledown and adjusts vehicle speed tofollow the vehicle in front at the

selected follow gap. The vehiclespeed increases or decreases tofollow the vehicle in front of you, butwill not exceed the set speed. It mayapply limited braking, if necessary.When braking is active, the brakelights will come on. The automaticbraking may feel or sound differentthan if the brakes were appliedmanually. This is normal.

Stationary or Very Slow-MovingObjects

{ Warning

Adaptive Cruise Control (ACC)may not detect and react tostopped or slow-moving vehiclesahead of you. For example, thesystem may not brake for avehicle that it has never detectedmoving. This can occur instop-and-go traffic or when avehicle suddenly appears due toa vehicle ahead changing lanes.Your vehicle may not stop and

(Continued)

Warning (Continued)

could cause a crash. Use cautionwhen using ACC. Your completeattention is always required whiledriving and you should be readyto take action and apply thebrakes.

ACC Automatically Disengages

ACC may automatically disengageand the driver will need to manuallyapply the brakes to slow thevehicle when:. The sensors are blocked.. The traction control system

(TCS) or electronic stabilitycontrol system has activated orbeen disabled.

. No traffic or other objects arebeing detected.

. There is a fault in the system.



A message indicating that cruise isdisengaging will appear on the DICand the ACC active symbol will notbe displayed when ACC is no longeractive.

Notification to Resume ACC

ACC will maintain a follow gapbehind a detected vehicle and slowyour vehicle to a stop behind thatvehicle.

If the stopped vehicle ahead hasdriven away and ACC has notresumed, the vehicle ahead symbolwill flash as a reminder to checktraffic ahead before proceeding. Inaddition, three beeps will sound.See “Go Notifier” in “Collision/Detection Systems” under VehiclePersonalization on page 5-48.

When the vehicle ahead drivesaway, press RES+ or theaccelerator pedal to resume cruisecontrol. If stopped for more thantwo minutes or if the driver door isopened and the driver safety belt isunbuckled, the ACC automaticallyapplies the electric parking brake to

hold the vehicle. The electricparking brake status light will turnon. See Parking Brake onpage 9-33. To resume ACC andrelease the electric parking brake,press the accelerator pedal.

A DIC warning message maydisplay indicating to shift to P (Park)before exiting the vehicle. SeeVehicle Messages on page 5-39.

{ Warning

If ACC has stopped the vehicle,and if ACC is disengaged, turnedoff, or canceled, the vehicle willno longer be held at a stop. Thevehicle can move. When ACC isholding the vehicle at a stop,always be prepared to manuallyapply the brakes.

{ Warning

Leaving the vehicle withoutplacing it in P (Park) can bedangerous. Do not leave thevehicle while it is being held at astop by ACC. Always place thevehicle in P (Park) and turn offthe ignition before leaving thevehicle.

ACC Override

If using the accelerator pedal whileACC is active, a warning messageon the DIC will indicate thatautomatic braking will not occur.See Vehicle Messages onpage 5-39. ACC will resumeoperation when the acceleratorpedal is not being pressed.



{ Warning

The ACC will not automaticallyapply the brakes if your foot isresting on the accelerator pedal.You could crash into a vehicleahead of you.

Curves in the Road

{ Warning

On curves, ACC may not detect avehicle ahead in your lane. Youcould be startled if the vehicleaccelerates up to the set speed,especially when following avehicle exiting or entering exitramps. You could lose control ofthe vehicle or crash. Do not useACC while driving on an entranceor exit ramp. Always be ready touse the brakes if necessary.

{ Warning

On curves, ACC may respond toa vehicle in another lane, or maynot have time to react to a vehiclein your lane. You could crash intoa vehicle ahead of you, or losecontrol of your vehicle. Give extraattention in curves and be readyto use the brakes if necessary.Select an appropriate speed whiledriving in curves.

ACC may operate differently in asharp curve. It may reduce thevehicle speed if the curve is toosharp.

When following a vehicle andentering a curve, ACC may notdetect the vehicle ahead andaccelerate to the set speed. Whenthis happens, the vehicle aheadsymbol will not appear.

ACC may detect a vehicle that isnot in your lane and apply thebrakes.

ACC may occasionally provide analert and/or braking that isconsidered unnecessary. It couldrespond to vehicles in differentlanes, signs, guardrails, and otherstationary objects when entering orexiting a curve. This is normaloperation. The vehicle does notneed service.



Other Vehicle Lane Changes

ACC will not detect a vehicle aheaduntil it is completely in the lane. Thebrakes may need to be manuallyapplied.

Do Not Use ACC on Hills andWhen Towing a Trailer

Do not use ACC when driving onsteep hills or when towing a trailer.ACC will not detect a vehicle in thelane while driving on steep hills. Thedriver will often need to take overacceleration and braking on steephills, especially when towing atrailer. If the brakes are applied, theACC disengages.

Disengaging ACC

There are three ways todisengage ACC:. Step lightly on the brake pedal.

. Press*.

. Press].

Erasing Speed Memory

The cruise control set speed iserased from memory if ] ispressed or if the ignition isturned off.

Cleaning the Sensing System

The radar sensor on the front of thevehicle can become blocked bysnow, ice, dirt, or mud. This areaneeds to be cleaned for ACC tooperate properly.

For cleaning instructions, see“Washing the Vehicle” underExterior Care on page 10-86.

System operation may also belimited under snow, heavy rain,or road spray conditions.



Driver AssistanceSystemsThis vehicle may have features thatwork together to help avoid crashesor reduce crash damage whiledriving, backing, and parking. Readthis entire section before usingthese systems.

{ Warning

Do not rely on the DriverAssistance Systems. Thesesystems do not replace the needfor paying attention and drivingsafely. You may not hear or seealerts or warnings provided bythese systems. Failure to useproper care when driving mayresult in injury, death, or vehicledamage. See Defensive Drivingon page 9-3.

Under many conditions, thesesystems will not:

(Continued)

Warning (Continued)

. Detect children, pedestrians,bicyclists, or animals.

. Detect vehicles or objectsoutside the area monitored bythe system.

. Work at all driving speeds.

. Warn you or provide you withenough time to avoid a crash.

. Work under poor visibility orbad weather conditions.

. Work if the detection sensoris not cleaned or is coveredby ice, snow, mud, or dirt.

Complete attention is alwaysrequired while driving, and youshould be ready to take actionand apply the brakes and/or steerthe vehicle to avoid crashes.

Assistance Systems forParking or BackingWhen the vehicle is in R (Reverse),the Rear Vision Camera (RVC),Rear Parking Assist, and RearCross Traffic Alert (RCTA),if equipped, may help the driver toavoid a crash or to reduce crashdamage. Some models may alsohave Front Parking Assist.

When the vehicle is shifted intoR (Reverse), the RVC displays animage of the area behind the vehiclein the center stack display.

{ Warning

The RVC system does not displaychildren, pedestrians, bicyclists,animals, or any other objectlocated outside the camera's fieldof view, below the bumper,or under the vehicle. Perceiveddistances may be different fromactual distances. Do not back the

(Continued)



Warning (Continued)

vehicle using only the RVCscreen, during longer, higherspeed backing maneuvers,or where there could be crosstraffic. Failure to use proper carebefore backing may result ininjury, death, or vehicle damage.Always check behind and aroundthe vehicle before backing.

1. View Displayed by the Camera

1. View Displayed by the Camera

2. Corners of the Rear Bumper

Displayed images may be farther orcloser than they appear. The areadisplayed is limited and objects thatare close to either corner of thebumper or under the bumper do notdisplay.

A warning triangle may display onthe RVC screen to show where theUltrasonic Rear Parking Assist(URPA) has detected an object. Thistriangle changes from amber to redand increases in size the closer theobject.

On vehicles with the Rear CrossTraffic Alert (RCTA), a red warningtriangle with an arrow may also

display on the RVC screen to warnof traffic coming from eitherdirection. This system detectsobjects coming from up to 20 m(65 ft) from the left or right side ofthe vehicle. When an object isdetected, three beeps sound fromthe left or right side, depending onthe direction of the detected vehicle.

With URPA, as the vehicle backs upat speeds of less than 8 km/h(5 mph), the system detects objectsup to 2.5 m (8 ft) behind the vehiclethat are within a zone 25 cm (10 in)high off the ground and belowbumper level. If the vehicle has theFront Parking Assist, it also detectsobjects 1.2 m (4 ft) in front of thevehicle. These detection distancesmay be less during warmer or humidweather.



{ Warning

The parking assist system doesnot detect children, pedestrians,bicyclists, animals, or objectslocated below the bumper or thatare too close or too far from thevehicle. It is not available atspeeds greater than 8 km/h(5 mph). To prevent injury, death,or vehicle damage, even withparking assist, always check thearea around the vehicle andcheck all mirrors before movingforward or backing.

The instrument cluster may have aparking assist display with bars thatshow “distance to object” and objectlocation information for URPA, andon some vehicles, for the FrontParking Assist system. As the objectgets closer, more bars light up.

When an object is first detected inthe rear, one beep will be heardfrom the rear. When an object isvery close (<0.6 m (2 ft) in thevehicle rear, or <0.3 m (1 ft) in thevehicle front), five beeps will soundfrom the rear or front depending onobject location. Beeps for FrontParking Assist are higher pitchedthan for Rear Parking Assist.

Turning the Features On or Off

TheX button on the center stackis used to turn on or off ParkingAssist. The indicator light next to thebutton comes on when the featuresare on and turns off when thefeatures have been disabled.

The RVC, the RCTA system,parking assist symbols, andguidance lines can be turned on oroff through the infotainment system:

1. On the infotainment system,press the Settings screenbutton, or turn the MENU knobto highlight Settings andpress MENU.

2. Select Rear Camera.



3. Press Rear Camera Display (ifequipped), Rear Cross TrafficAlert, Park Assist Symbols,or Guidance Lines and thenselect OFF or ON.

Assistance Systems forDrivingIf equipped, when driving thevehicle forward, Forward CollisionAlert (FCA), Lane DepartureWarning (LDW), Side Blind ZoneAlert (SBZA), Lane Change Alert(LCA), and/or the Active EmergencyBraking System can help to avoid acrash or reduce crash damage.

Forward Collision Alert(FCA) SystemThe Forward Collision Alert (FCA)system may help to avoid or reducethe harm caused by front-endcrashes. FCA provides a visual alertand beeps when approaching avehicle directly ahead too quickly.

The forward-looking FCA camerasensor is on the windshield aheadof the rearview mirror. FCA detectsvehicles within a distance ofapproximately 60 m (197 ft) andoperates at speeds above 40 km/h(25 mph). If the vehicle has AdaptiveCruise Control (ACC), it can detectvehicles to distances ofapproximately 110 m (360 ft) andoperates at all speeds. SeeAdaptive Cruise Control onpage 9-41.

{ Warning

FCA is a warning system anddoes not apply the brakes. Whenapproaching a slower-moving orstopped vehicle ahead too rapidly,or when following a vehicle tooclosely, FCA may not provide awarning with enough time to helpavoid a crash. FCA does not warnof pedestrians, animals, signs,guardrails, bridges, construction

(Continued)

Warning (Continued)

barrels, or other objects. Be readyto take action and apply thebrakes. For more information, seeDefensive Driving on page 9-3.

Detecting the Vehicle Ahead

FCA warnings will not occur unlessthe FCA system detects a vehicleahead. The vehicle ahead indicatorwill display green when a vehicle isdetected in front. Vehicles may notbe detected on curves, highway exitramps, or hills; or due to poorvisibility. FCA will not detect anothervehicle ahead until it is completelyin the driving lane.



{ Warning

FCA does not provide a warningto help avoid a crash, unless itdetects a vehicle. FCA may notdetect a vehicle ahead if the FCAsensor is blocked by dirt, snow,or ice, or if the windshield isdamaged. It may also not detect avehicle on winding or hilly roads,or in conditions that can limitvisibility such as fog, rain,or snow, or if the headlamps orwindshield are not cleaned or inproper condition. Keep thewindshield, headlamps, and FCAsensors clean and in good repair.

Collision Alert

When your vehicle approachesanother vehicle too rapidly, the FCAdisplay will come on and severalbeeps will sound from the front.When this occurs, the brake systemprepares for driver braking to occurmore rapidly, if needed.

Selecting the Alert Timing

The Collision Alert control is on thesteering wheel. Press3 to set thealert timing. The first button pressshows the current control setting on

the DIC. Additional button presseswill change this setting and turn thesystem off.

Unnecessary Alerts

FCA may provide unnecessaryalerts to turning vehicles, vehicles inother lanes, objects that are notvehicles, or shadows. These alertsare normal operation and thevehicle does not need service.

Other Messages

There are messages that mayappear on the Driver InformationCenter (DIC) in the instrumentcluster to provide information aboutFCA. See Object Detection SystemMessages on page 5-43.

Cleaning the System

If the FCA system does not seem tooperate properly, clean the outsideof the windshield area in front of thecamera sensor before consideringtaking the vehicle in for service.



Active EmergencyBraking SystemIf the vehicle has Adaptive CruiseControl (ACC) it also has the ActiveEmergency Braking System, whichincludes Intelligent BrakeAssist (IBA) and the AutomaticCollision Preparation (ACP) System.These systems can provide a boostto braking or automatically brake thevehicle to help avoid or lessen theseverity of crashes.

Intelligent Brake Assist (IBA)

IBA may activate when the brakepedal is applied quickly by providinga boost to braking based on thespeed of approach and distance toa vehicle ahead.

Minor brake pedal pulsations orpedal movement during this time isnormal and the brake pedal shouldcontinue to be applied as needed.IBA will automatically disengageonly when the brake pedal isreleased

{ Warning

IBA may increase vehicle brakingin situations when it may not benecessary. You could block theflow of traffic. If this occurs, takeyour foot off the brake pedal andthen apply the brakes as needed.

Automatic CollisionPreparation (ACP) System

ACP may help reduce crashdamage by applying the vehicle’sbrake system and has a detectionrange of approximately 60 m(197 ft). Braking can only occur if avehicle is detected ahead. This isshown by the FCA vehicle-aheadindicator being lit. See ForwardCollision Alert (FCA) System onpage 9-52.

{ Warning

ACP is an emergency crashpreparation feature and is notdesigned to avoid crashes. Donot rely on ACP to brake thevehicle.

ACP may not:. Respond to stopped vehicles,pedestrians, or animals.

. Detect a vehicle ahead onwinding or hilly roads.

. Detect a stopped orslow-moving vehicle or otherobject ahead.

. Detect a vehicle whenweather limits visibility, suchas in fog, rain, or snow. Inthese situations, ACP sensorperformance is limited.

(Continued)



Warning (Continued)

Complete attention is alwaysrequired while driving, and youshould be ready to take actionand apply the brakes and/or steerthe vehicle to avoid crashes.

Brake Preparation

When quickly approaching a vehicleahead, Brake Preparation reducesbrake response time by having thebrake system prepared for driverbraking to occur more rapidly.

Automatic Braking

In some imminent front-end crashsituations, if the driver has notapplied the brakes, AutomaticBraking applies the brakes to helpreduce crash damage. It may evenhelp avoid some very low speedcrashes.

Automatic Braking may slow thevehicle to a complete stop to try toavoid a potential crash. The vehicle

will only hold at a stop briefly. A firmpress of the accelerator pedal willalso release Automatic Braking.

{ Warning

Automatic Braking mayautomatically brake the vehicle insituations where it may beunnecessary. It could respond toa turning vehicle ahead,guardrails, signs, and othernon-moving objects. This couldbe uncomfortable and startling. Tooverride Automatic Braking, firmlypress the accelerator pedal, if it issafe to do so.

Automatic Braking can be disabledor reduced through vehiclepersonalization. See the “AutoCollision Preparation” portion of“Collision/Detection Systems” underVehicle Personalization onpage 5-48.

{ Warning

Using the Automatic CollisionPreparation System while towinga trailer could cause you to losecontrol of the vehicle and crash.Turn the system off when towinga trailer.

Side Blind ZoneAlert (SBZA)If equipped, the SBZA system is alane-changing aid that assistsdrivers with avoiding crashes thatoccur with vehicles in the side blindzone (or spot) areas. When thevehicle is moving forward, the left-or right-side mirror display will lightup if a vehicle is detected in thatblind zone. If the turn signal isactivated and a vehicle is alsodetected on the same side, thedisplay will flash as an extrawarning not to change lanes. Sincethis system is part of the Lane



Change Alert system, please readthe entire Lane Change Alertsection before using this feature.

Lane Change AlertIf equipped, the Lane Change Alert(LCA) system is a lane-changing aidthat assists drivers with avoidinglane change crashes that occur withvehicles in the side blind zone (orspot) areas or with vehicles rapidlyapproaching these areas frombehind. The LCA warning displaywill light up in the correspondingoutside side mirror and will flash ifthe turn signal is on.

{ Warning

LCA does not alert the driver tovehicles outside of the systemdetection zones, pedestrians,bicyclists, or animals. It may notprovide alerts when changinglanes under all driving conditions.Failure to use proper care when

(Continued)

Warning (Continued)

changing lanes may result ininjury, death, or vehicle damage.Before making a lane change,always check mirrors, glance overyour shoulder, and use the turnsignals.

1. SBZA Detection Zone

2. LCA Detection Zone

LCA Detection Zones

The LCA sensor covers a zone ofapproximately one lane over fromboth sides of the vehicle, or 3.5 m(11 ft). The height of the zone is

approximately between 0.5 m (1.5 ft)and 2 m (6 ft) off the ground. Theside blind zone warning area startsat approximately the middle of thevehicle and goes back 5 m (16 ft).Drivers are also warned of vehiclesrapidly approaching from up to70 m (230 ft) behind the vehicle.

How the System Works

The LCA symbol lights up in theside mirrors when the systemdetects a vehicle in the next laneover that is in the side blind zone orrapidly approaching from behind.A lit LCA symbol indicates it may beunsafe to change lanes. Beforemaking a lane change, check theLCA display, check mirrors, glanceover your shoulder, and use the turnsignals.



Left Side MirrorDisplay

Right Side MirrorDisplay

When the vehicle is started, bothoutside mirror LCA displays willbriefly come on to indicate thesystem is operating. When thevehicle is moving forward, the left-or right-side mirror display will lightup if a vehicle is detected in thenext lane over in that blind zone orrapidly approaching that zone. If theturn signal is activated in the samedirection as a detected vehicle, thisdisplay will flash as an extrawarning not to change lanes.

LCA can be disabled throughvehicle personalization. See“Collision/Detection Systems” underVehicle Personalization onpage 5-48. If LCA is disabled by thedriver, the LCA mirror displays willnot light up.

When the System Does NotSeem to Work Properly

The LCA system requires somedriving for the system to calibrate tomaximum performance. Thiscalibration may occur more quickly ifthe vehicle is driving on a straighthighway road with traffic androadside objects (e.g., guardrails,barriers).

LCA displays may not come onwhen passing a vehicle quickly. LCAmay alert to objects attached to thevehicle, such as a trailer, bicycle,or object extending out to either sideof the vehicle. Attached objects mayalso interfere with the detection ofvehicles. This is normal systemoperation; the vehicle does not needservice.

LCA may not always alert the driverto vehicles in the next lane over,especially in wet conditions or whendriving on sharp curves. The systemdoes not need to be serviced. Thesystem may light up due toguardrails, signs, trees, shrubs, andother non-moving objects. This isnormal system operation; thevehicle does not need service.

LCA may not operate when the LCAsensors in the left or right corners ofthe rear bumper are covered withmud, dirt, snow, ice, or slush, or inheavy rainstorms. For cleaninginstructions, see "Washing theVehicle" under Exterior Care onpage 10-86. If the DIC still displaysthe system unavailable messageafter cleaning both sides of thevehicle toward the rear corners ofthe vehicle, see your dealer.

If the LCA displays do not light upwhen vehicles are in the side blindzone or rapidly approaching thiszone and the system is clean, thesystem may need service. Take thevehicle to your dealer.



When LCA is disabled for anyreason other than the driver turningit off, the Side Blind Zone Alert Onoption will not be available on thepersonalization menu.

FCC Information

See Radio Frequency Statement onpage 13-15.

Lane DepartureWarning (LDW)If equipped, LDW may help avoidcrashes due to unintentional lanedepartures. It may provide awarning if the vehicle is crossing adetected lane without using a turnsignal in the lane departuredirection. LDW uses a camerasensor to detect the lane markings.It only operates at speeds of56 km/h (35 mph) or greater.

When the vehicle crosses adetected lane marking, the LDWindicator will flash and three beepswill be sounded from the left or rightside, depending on the lane

departure direction. LDW will notwarn if the turn signal is on in thedeparture direction, or if a sharpmaneuver is made.

{ Warning

The LDW system is an aid to helpthe vehicle stay in the drivinglane. It does not steer the vehicle.The LDW system may not:

. Provide enough time to avoida crash.

. Detect lane markings underbad weather conditions or ifthe windshield is dirty.

. Detect lane markings and willnot detect road edges.

. Warn that the vehicle iscrossing a lane marking if thesystem does not detect thelane marking.

(Continued)

Warning (Continued)

If LDW only detects lanemarkings on one side of the road,it will only warn you whendeparting the lane on the sidewhere it has detected a lanemarker. Even with LDW, alwayskeep your attention on the roadand maintain proper vehicleposition within the lane, or vehicledamage, injury, or death couldoccur. Always keep thewindshield clean and do not useLDW in bad weather conditions.

How the System Works

The LDW camera sensor is on thewindshield ahead of the rearviewmirror.

To turn LDW on and off, press @ onthe center stack. The controlindicator will light when LDW is on.



When the vehicle is started, theLDW indicator on the instrumentcluster will come on briefly.

If LDW is on, the LDW indicator willappear green if the system detectsa left or right lane marking while thevehicle is traveling at 56 km/h(35 mph) or greater. If the vehiclecrosses a detected lane markingwithout using the turn signal in thelane departure direction, thisindicator will change to amber andflash. In addition, three beeps willbe sounded from the left or rightside, depending on the lanedeparture direction.

When the System Does NotSeem to Work Properly

If the LDW symbol does not appearwhen the system is on and thevehicle is traveling at least 56 km/h(35 mph):. The lane markings on the road

may not be seen.. The camera sensor may be

blocked by dirt, snow, or ice.. The windshield may be

damaged.. The weather may be limiting

visibility.

This is normal operation; the vehicledoes not need service. Clean thewindshield.

Lane markings may not be detectedon curves, highway exit ramps,or hills; or due to poor visibility.

If the LDW camera system does notseem to operate properly, cleaningthe outside of the windshield in frontof the camera sensor may correctthe issue.

{ Warning

LDW does not provide a warningto help avoid a crash, unless itdetects the lane markings. LDWmay not detect the lane markingsif the camera sensor is blockedby dirt, snow, or ice, or if thewindshield is damaged. It mayalso not detect a lane on windingor hilly roads, or in conditions thatcan limit visibility such as fog,rain, or snow, or if the headlampsor windshield are not cleaned orin proper condition. Keep thewindshield, headlamps, andcamera sensors clean and ingood repair.

LDW warnings may occur due to tarmarks, shadows, cracks in the road,or other road imperfections. This isnormal system operation; thevehicle does not need service.



FuelUse of the recommended fuel is animportant part of the propermaintenance of this vehicle. Whendriving in the U.S., to help keep theengine clean and maintain optimumvehicle performance, werecommend using TOP TIERDetergent Gasolines. Seewww.toptiergas.com for a list of TOPTIER Detergent Gasolines.

If the vehicle has a yellow fuel cap,E85 or FlexFuel can be used in thevehicle. See E85 or FlexFuel onpage 9-62.

Recommended FuelIf the vehicle has a 2.4L L4 engine,use regular unleaded gasoline witha posted octane rating of 87 orhigher. If the octane rating is lessthan 87, an audible knocking noise,commonly referred to as sparkknock, might be heard when driving.If this occurs, use a gasoline ratedat 87 octane or higher as soon aspossible. If heavy knocking is heardwhen using gasoline rated at87 octane or higher, the engineneeds service.

If the vehicle has the 2.0L L4 turboengine, use premium unleadedgasoline with a posted octane ratingof 91 or higher. You can also useregular unleaded gasoline rated at87 octane or higher, but thevehicle's acceleration could beslightly reduced, and a slight audible

knocking noise, commonly referredto as spark knock, might be heard.If the octane is less than 87, aheavy knocking noise might beheard when driving. If this occurs,use a gasoline rated at 87 octane orhigher as soon as possible.Otherwise, you could damage theengine. If heavy knocking is heardwhen using gasoline rated at87 octane or higher, the engineneeds service.

Use of Seasonal Fuels

Use summer and winter fuels in theappropriate season. Driving orstarting could be affected if theincorrect fuel is used. Drive thevehicle with the engine running untilthe fuel is a half tank or less, thenrefuel with the current seasonal fuel.

Prohibited Fuels

Gasolines containing oxygenates,such as ethers and ethanol, as wellas reformulated gasolines areavailable in some cities. If thesegasolines comply with thepreviously described specification,



then they are acceptable to use.However, E85 (85% ethanol) andother fuels containing more than15% ethanol must be used only inflex fuel vehicles.

{ Caution

Do not use fuel containingmethanol. It can corrode metalparts in the fuel system and alsodamage plastic and rubber parts.That damage would not becovered under the vehiclewarranty.

Some gasolines that are notreformulated for low emissions cancontain an octane-enhancingadditive calledmethylcyclopentadienyl manganesetricarbonyl (MMT). Do not usegasolines with MMT as they canreduce spark plug life and affectemission control systemperformance. The malfunctionindicator lamp may turn on. If thisoccurs, see your dealer for service.

Gasoline SpecificationsAt a minimum, gasoline should meetASTM specification D 4814. Somegasolines contain anoctane-enhancing additive calledmethylcyclopentadienyl manganesetricarbonyl (MMT). We recommendagainst the use of gasolinescontaining MMT. See “ProhibitedFuels" in Recommended Fuel onpage 9-60.

California FuelRequirementsIf the vehicle is certified to meetCalifornia Emissions Standards, it isdesigned to operate on fuels thatmeet California specifications. Seethe underhood emission controllabel. If this fuel is not available instates adopting California EmissionsStandards, the vehicle will operatesatisfactorily on fuels meetingfederal specifications, but emissioncontrol system performance mightbe affected. The malfunctionindicator lamp could turn on and the

vehicle may not pass a smog-checktest. See Malfunction IndicatorLamp on page 5-21. If this occurs,return to your authorized dealer fordiagnosis. If it is determined that thecondition is caused by the type offuel used, repairs may not becovered by the vehicle warranty.

Fuels in ForeignCountriesIf planning to drive in countriesoutside the U.S. or Canada, theproper fuel might be hard to find.Check regional auto club or fuelretail brand websites for availabilityin the country where driving. Neveruse leaded gasoline, fuel containingmethanol or manganese, or anyother fuel not recommended. Costlyrepairs caused by use of improperfuel would not be covered by thevehicle warranty.



Fuel AdditivesTo keep fuel systems clean, TOPTIER Detergent Gasoline isrecommended. See Fuel onpage 9-60.

If TOP TIER Detergent Gasoline isnot available, one bottle of FuelSystem Treatment PLUS added tothe fuel tank at every engine oilchange, can help. Fuel SystemTreatment PLUS is the onlygasoline additive recommended byGeneral Motors. It is available atyour dealer.

Do not use additives with E85 orFlexFuel.

E85 or FlexFuelVehicles with a yellow fuel cap canuse either unleaded gasoline or fuelcontaining up to 85% ethanol (E85).All other vehicles should use onlythe unleaded gasoline as describedin Recommended Fuel onpage 9-60.

The use of E85 or FlexFuel isencouraged when the vehicle isdesigned to use it. E85 or FlexFuelis made from renewable sources.

To help locate fuel stations thatcarry E85 or FlexFuel, the U.S.Department of Energy has analternative fuel website. Seewww.afdc.energy.gov/afdc/locator/stations.

E85 or FlexFuel should meet ASTMSpecification D 5798 or CAN/CGSB–3.512 in Canada. Do not usethe fuel if the ethanol content isgreater than 85%. Fuel mixtures thatdo not meet ASTM or CGSBspecifications can affect driveabilityand could cause the malfunctionindicator lamp to come on.

The starting characteristics of E85or FlexFuel make it unsuitable foruse when temperatures fall below−18°C (0°F). Use gasoline or addgasoline to the E85 or FlexFuel.

Because E85 or FlexFuel has lessenergy per liter (gallon) thangasoline, the vehicle will need to berefilled more often. See Filling theTank on page 9-63.

{ Caution

Some additives are notcompatible with E85 or FlexFueland can harm the vehicle's fuelsystem. Do not add anything toE85 or FlexFuel. Damage causedby additives would not be coveredby the vehicle warranty.

{ Caution

Do not use fuel containingmethanol. It can corrode metalparts in the fuel system and alsodamage plastic and rubber parts.That damage would not becovered under the vehiclewarranty.



Filling the Tank

{ Warning

Fuel vapors and fuel fires burnviolently and can cause injury ordeath.

. To help avoid injuries to youand others, read and followall the instructions on the fuelpump island.

. Turn off the engine whenrefueling.

. Keep sparks, flames, andsmoking materials awayfrom fuel.

. Do not leave the fuel pumpunattended.

. Do not reenter the vehiclewhile pumping fuel.

. Keep children away from thefuel pump and never letchildren pump fuel.

(Continued)

Warning (Continued)

. Fuel can spray out if the fuelcap is opened too quickly.This spray can happen if thetank is nearly full, and ismore likely in hot weather.Open the fuel cap slowly andwait for any hiss noise to stopthen unscrew the cap allthe way.

The fuel cap is behind a hinged fueldoor on the passenger side of thevehicle. To open the fuel door, pushand release the rearward centeredge of the door.

Turn the fuel cap counterclockwiseto remove. Reinstall the cap byturning it clockwise until it clicksafter fueling.

Do not top off or overfill the tank.Wait a few seconds before removingthe nozzle. Clean fuel from paintedsurfaces as soon as possible. SeeExterior Care on page 10-86.

{ Warning

If a fire starts while you arerefueling, do not remove thenozzle. Shut off the flow of fuel byshutting off the pump or bynotifying the station attendant.Leave the area immediately.



{ Caution

If a new fuel cap is needed, besure to get the right type of capfrom your dealer. The wrong typeof fuel cap might not fit properly,might cause the malfunctionindicator lamp to light, and coulddamage the fuel tank andemissions system. SeeMalfunction Indicator Lamp onpage 5-21.

Filling a Portable FuelContainer

{ Warning

Filling a portable fuel containerwhile it is in the vehicle can causefuel vapors that can ignite eitherby static electricity or othermeans. You or others could bebadly burned and the vehiclecould be damaged. Always:

. Use approved fuelcontainers.

. Remove the container fromthe vehicle, trunk, or pickupbed before filling.

. Place the container on theground.

. Place the nozzle inside the fillopening of the containerbefore dispensing fuel, and

(Continued)

Warning (Continued)

keep it in contact with the fillopening until filling iscomplete.

. Fill the container no morethan 95% full to allow forexpansion.

. Do not smoke, light matches,or use lighters whilepumping fuel.

. Avoid using cell phones orother electronic devices.



Towing

General TowingInformationThe vehicle is neither designed norintended to tow a trailer.

Conversions andAdd-Ons

Add-On ElectricalEquipment

{ Caution

Some electrical equipment candamage the vehicle or causecomponents to not work andwould not be covered by thewarranty. Always check with yourdealer before adding electricalequipment.

Add-on equipment can drain thevehicle's 12-volt battery, even if thevehicle is not operating.

The vehicle has an airbag system.Before attempting to add anythingelectrical to the vehicle, seeServicing the Airbag-EquippedVehicle on page 3-29 and AddingEquipment to the Airbag-EquippedVehicle on page 3-29.



2 NOTES


Vehicle Care 10-1

Vehicle Care

General InformationGeneral Information . . . . . . . . . . 10-2California Proposition65 Warning . . . . . . . . . . . . . . . . . 10-2

California PerchlorateMaterials Requirements . . . . 10-3

Accessories andModifications . . . . . . . . . . . . . . . 10-3

Vehicle ChecksDoing Your OwnService Work . . . . . . . . . . . . . . . 10-3

Hood . . . . . . . . . . . . . . . . . . . . . . . . 10-4Engine CompartmentOverview . . . . . . . . . . . . . . . . . . . 10-6

Engine Oil . . . . . . . . . . . . . . . . . . 10-11Engine Oil Life System . . . . . 10-13Automatic TransmissionFluid . . . . . . . . . . . . . . . . . . . . . . 10-15

Manual TransmissionFluid . . . . . . . . . . . . . . . . . . . . . . 10-15

Hydraulic Clutch . . . . . . . . . . . . 10-15Engine Air Cleaner/Filter . . . . 10-16Cooling System . . . . . . . . . . . . 10-17Engine Coolant . . . . . . . . . . . . . 10-19Engine Overheating . . . . . . . . 10-22

Washer Fluid . . . . . . . . . . . . . . . 10-23Brakes . . . . . . . . . . . . . . . . . . . . . 10-24Brake Fluid . . . . . . . . . . . . . . . . . 10-25Battery . . . . . . . . . . . . . . . . . . . . . 10-27All-Wheel Drive . . . . . . . . . . . . . 10-28Starter Switch Check . . . . . . . 10-28Automatic Transmission ShiftLock Control FunctionCheck . . . . . . . . . . . . . . . . . . . . . 10-28

Ignition Transmission LockCheck . . . . . . . . . . . . . . . . . . . . . 10-29

Park Brake and P (Park)Mechanism Check . . . . . . . . 10-29

Wiper BladeReplacement . . . . . . . . . . . . . . 10-29

Headlamp AimingHeadlamp Aiming . . . . . . . . . . 10-30

Bulb ReplacementBulb Replacement . . . . . . . . . . 10-31Halogen Bulbs . . . . . . . . . . . . . . 10-31High Intensity Discharge(HID) Lighting . . . . . . . . . . . . . 10-31

Headlamps, Front TurnSignal and ParkingLamps . . . . . . . . . . . . . . . . . . . . 10-31

Fog Lamps . . . . . . . . . . . . . . . . . 10-32

Taillamps, Turn Signal,Stoplamps, and Back-UpLamps . . . . . . . . . . . . . . . . . . . . 10-33

License Plate Lamp . . . . . . . . 10-33Replacement Bulbs . . . . . . . . . 10-34

Electrical SystemHigh Voltage Devices andWiring . . . . . . . . . . . . . . . . . . . . . 10-34

Electrical SystemOverload . . . . . . . . . . . . . . . . . . 10-35

Fuses and CircuitBreakers . . . . . . . . . . . . . . . . . . 10-35

Engine Compartment FuseBlock . . . . . . . . . . . . . . . . . . . . . 10-36

Instrument Panel FuseBlock . . . . . . . . . . . . . . . . . . . . . 10-39

Wheels and TiresTires . . . . . . . . . . . . . . . . . . . . . . . . 10-41All-Season Tires . . . . . . . . . . . . 10-42Winter Tires . . . . . . . . . . . . . . . . 10-42Summer Tires . . . . . . . . . . . . . . 10-43Tire Sidewall Labeling . . . . . . 10-43Tire Designations . . . . . . . . . . . 10-45Tire Terminology andDefinitions . . . . . . . . . . . . . . . . 10-46

Tire Pressure . . . . . . . . . . . . . . . 10-48


10-2 Vehicle Care

Tire Pressure for High-SpeedOperation . . . . . . . . . . . . . . . . . 10-50

Tire Pressure MonitorSystem . . . . . . . . . . . . . . . . . . . 10-50

Tire Pressure MonitorOperation . . . . . . . . . . . . . . . . . 10-51

Tire Inspection . . . . . . . . . . . . . . 10-55Tire Rotation . . . . . . . . . . . . . . . 10-55When It Is Time for NewTires . . . . . . . . . . . . . . . . . . . . . . 10-56

Buying New Tires . . . . . . . . . . . 10-57Different Size Tires andWheels . . . . . . . . . . . . . . . . . . . 10-58

Uniform Tire QualityGrading . . . . . . . . . . . . . . . . . . . 10-59

Wheel Alignment and TireBalance . . . . . . . . . . . . . . . . . . . 10-60

Wheel Replacement . . . . . . . . 10-61Tire Chains . . . . . . . . . . . . . . . . . 10-62If a Tire Goes Flat . . . . . . . . . . 10-62Tire Sealant andCompressor Kit . . . . . . . . . . . 10-64

Storing the Tire Sealant andCompressor Kit . . . . . . . . . . . 10-71

Tire Changing . . . . . . . . . . . . . . 10-71Compact Spare Tire . . . . . . . . 10-76

Jump StartingJump Starting (On-boardwith eAssist Only) . . . . . . . . . 10-77

Jump Starting (with orwithout eAssist) . . . . . . . . . . . 10-79

TowingTowing the Vehicle . . . . . . . . . 10-82Recreational VehicleTowing . . . . . . . . . . . . . . . . . . . . 10-82

Appearance CareExterior Care . . . . . . . . . . . . . . . 10-86Interior Care . . . . . . . . . . . . . . . . 10-90Floor Mats . . . . . . . . . . . . . . . . . . 10-94

General InformationFor service and parts needs, visityour dealer. You will receivegenuine GM parts and GM-trainedand supported service people.

Genuine GM parts have one ofthese marks:

California Proposition65 WarningMost motor vehicles, including thisone, contain and/or emit chemicalsknown to the State of California to


Vehicle Care 10-3

cause cancer and birth defects orother reproductive harm. Engineexhaust, many parts and systems,many fluids, and some componentwear by-products contain and/oremit these chemicals.

California PerchlorateMaterials RequirementsCertain types of automotiveapplications, such as airbaginitiators, safety belt pretensioners,and lithium batteries contained inRemote Keyless Entry transmitters,may contain perchlorate materials.Special handling may be necessary.For additional information, seewww.dtsc.ca.gov/hazardouswaste/perchlorate.

Accessories andModificationsAdding non‐dealer accessories ormaking modifications to the vehiclecan affect vehicle performance andsafety, including such things asairbags, braking, stability, ride and

handling, emissions systems,aerodynamics, durability, andelectronic systems like antilockbrakes, traction control, and stabilitycontrol. These accessories ormodifications could even causemalfunction or damage not coveredby the vehicle warranty.

Damage to vehicle componentsresulting from modifications or theinstallation or use of non‐GMcertified parts, including controlmodule or software modifications, isnot covered under the terms of thevehicle warranty and may affectremaining warranty coverage foraffected parts.

GM Accessories are designed tocomplement and function with othersystems on the vehicle. See yourdealer to accessorize the vehicleusing genuine GM Accessoriesinstalled by a dealer technician.

Also, see Adding Equipment to theAirbag-Equipped Vehicle onpage 3-29.

Vehicle Checks

Doing Your OwnService WorkeAssist Vehicles Only

{ Warning

Never try to do your own serviceon eAssist components. You canbe injured and the vehicle can bedamaged if you try to do your ownservice work. Service and repairof these eAssist componentsshould only be performed by atrained service technician with theproper knowledge and tools.


10-4 Vehicle Care

All Vehicles

{ Warning

It can be dangerous to work onyour vehicle if you do not havethe proper knowledge, servicemanual, tools, or parts. Alwaysfollow owner manual proceduresand consult the service manualfor your vehicle before doing anyservice work.

If doing some of your own servicework, use the proper servicemanual. It tells you much moreabout how to service the vehiclethan this manual can. To order theproper service manual, see ServicePublications Ordering Informationon page 13-11.

This vehicle has an airbag system.Before attempting to do your ownservice work, see Airbag SystemCheck on page 3-30.

Keep a record with all parts receiptsand list the mileage and the date ofany service work performed. SeeMaintenance Records onpage 11-14.

{ Caution

Even small amounts ofcontamination can cause damageto vehicle systems. Do not allowcontaminants to contact the fluids,reservoir caps, or dipsticks.

HoodTo open the hood:

1. Pull up on the hood releasehandle with this symbol on it.It is inside the vehicle on thelower side of the instrumentpanel.

2. Go to the front of the vehicle tofind the secondary hood releasehandle. The handle is under thefront edge of the hood near thecenter. Push the handle to theright and at the same time raisethe hood.


Vehicle Care 10-5

To close the hood:

1. Before closing the hood, be sureall the filler caps are on properly.

2. Lower the hood 30 cm (12 in)above the vehicle and release itso it fully latches. Check tomake sure the hood is closedand repeat the process ifnecessary.


10-6 Vehicle Care

Engine Compartment Overview

2.0L L4 Turbo Engine


Vehicle Care 10-7

1. Engine Air Cleaner/Filter onpage 10-16.

2. Engine Oil Fill Cap. See EngineOil on page 10-11.

3. Engine Oil Dipstick. See EngineOil on page 10-11.

4. Transmission Fluid Cap. SeeAutomatic Transmission Fluid onpage 10-15.

5. Brake Fluid Reservoir. SeeBrakes on page 10-24.

6. Coolant Surge Tank andPressure Cap. See EngineCoolant on page 10-19.

7. Battery (Under Cover). SeeBattery on page 10-27.

8. Engine Compartment FuseBlock on page 10-36.

9. Windshield Washer FluidReservoir. See Washer Fluid onpage 10-23.


10-8 Vehicle Care

2.4L L4 Engine without eAssist


Vehicle Care 10-9


2. Engine Cover.


4. Engine Oil Dipstick. See EngineOil on page 10-11.

5. Transmission Fluid Cap andDipstick. See AutomaticTransmission Fluid onpage 10-15.

6. Brake Master CylinderReservoir. See Brakes onpage 10-24.


8. Battery Cover. See Battery onpage 10-27.


10. Windshield Washer FluidReservoir. See Washer Fluidon page 10-23.


10-10 Vehicle Care

2.4L L4 Engine with eAssist


Vehicle Care 10-11


2. Engine Cover.

3. Engine Cooling Fans (Out ofView). See Cooling System onpage 10-17.


5. Engine Oil Dipstick (Out ofView). See Engine Oil onpage 10-11.

6. High Voltage Cable (OrangeColor).

7. Transmission Fluid Cap. SeeAutomatic Transmission Fluid onpage 10-15.

8. Brake Master CylinderReservoir. See Brakes onpage 10-24.

9. Battery (Under Cover). SeeBattery on page 10-27.



12. Windshield Washer FluidReservoir. See Washer Fluidon page 10-23.

Engine OilTo ensure proper engineperformance and long life, carefulattention must be paid to engine oil.Following these simple, butimportant steps will help protectyour investment:. Always use engine oil approved

to the proper specification and ofthe proper viscosity grade. See“Selecting the Right Engine Oil”in this section.

. Check the engine oil levelregularly and maintain theproper oil level. See “CheckingEngine Oil” and “When to AddEngine Oil” in this section.

. Change the engine oil at theappropriate time. See Engine OilLife System on page 10-13.

. Always dispose of engine oilproperly. See “What to Do withUsed Oil” in this section.

Checking Engine Oil

It is a good idea to check the engineoil level at each fuel fill. In order toget an accurate reading, the oilmust be warm and the vehicle mustbe on level ground. The engine oildipstick handle is a loop. SeeEngine Compartment Overview onpage 10-6 for the location of theengine oil dipstick.

Obtaining an accurate oil levelreading is essential:

1. If the engine has been runningrecently, turn off the engine andallow several minutes for the oilto drain back into the oil pan.Checking the oil level too soonafter engine shutoff will notprovide an accurate oil levelreading.


10-12 Vehicle Care

{ Warning

The engine oil dipstick handlemay be hot; it could burn you.Use a towel or glove to touch thedipstick handle.

2. Pull out the dipstick and clean itwith a paper towel or cloth, thenpush it back in all the way.Remove it again, keeping the tipdown, and check the level.

When to Add Engine Oil

If the oil is below the cross-hatchedarea at the tip of the dipstick, add1 L (1 qt) of the recommended oiland then recheck the level. See“Selecting the Right Engine Oil” inthis section for an explanation of

what kind of oil to use. For engineoil crankcase capacity, seeCapacities and Specifications onpage 12-2.

{ Caution

Do not add too much oil. Oillevels above or below theacceptable operating rangeshown on the dipstick are harmfulto the engine. If you find that youhave an oil level above theoperating range, i.e., the enginehas so much oil that the oil levelgets above the cross-hatchedarea that shows the properoperating range, the engine couldbe damaged. You should drainout the excess oil or limit drivingof the vehicle and seek a serviceprofessional to remove theexcess amount of oil.

See Engine Compartment Overviewon page 10-6 for the location of theengine oil fill cap.

Add enough oil to put the levelsomewhere in the proper operatingrange. Push the dipstick all the wayback in when through.

Selecting the Right Engine Oil

Selecting the right engine oildepends on both the proper oilspecification and viscosity grade.See Recommended Fluids andLubricants on page 11-11.

Specification

Use and ask for licensed engine oilswith the dexos1® approvedcertification mark. Engine oilsmeeting the requirements for thevehicle should have the dexos1approved certification mark. Thiscertification mark indicates that theoil has been approved to the dexos1specification. Seewww.gmdexos.com.


Vehicle Care 10-13

{ Caution

Failure to use the recommendedengine oil can result in enginedamage not covered by thevehicle warranty. Check with yourdealer or service provider onwhether the oil is approved to thedexos1 specification.

Viscosity Grade

Use SAE 5W-30 viscosity gradeengine oil.

Cold Temperature Operation: In anarea of extreme cold, where thetemperature falls below −29°C(−20°F), an SAE 0W-30 oil may beused. An oil of this viscosity gradewill provide easier cold starting forthe engine at extremely low

temperatures. When selecting an oilof the appropriate viscosity grade,always select an oil of the correctspecification. See “Specification”earlier in this section for moreinformation.

Engine Oil Additives/EngineOil Flushes

Do not add anything to the oil. Therecommended oils with the dexosspecification and displaying thedexos certification mark are all thatis needed for good performance andengine protection.

Engine oil system flushes are notrecommended and could causeengine damage not covered by thevehicle warranty.

What to Do with Used Oil

Used engine oil contains certainelements that can be unhealthy foryour skin and could even causecancer. Do not let used oil stay onyour skin for very long. Clean yourskin and nails with soap and water,or a good hand cleaner. Wash or

properly dispose of clothing or ragscontaining used engine oil. See themanufacturer's warnings about theuse and disposal of oil products.

Used oil can be a threat to theenvironment. If you change yourown oil, be sure to drain all the oilfrom the filter before disposal. Neverdispose of oil by putting it in thetrash or pouring it on the ground,into sewers, or into streams orbodies of water. Recycle it by takingit to a place that collects used oil.

Engine Oil Life System

When to Change Engine Oil

This vehicle has a computer systemthat indicates when to change theengine oil and filter. This is basedon a combination of factors whichinclude engine revolutions, enginetemperature, and miles driven.Based on driving conditions, themileage at which an oil change isindicated can vary considerably. For


10-14 Vehicle Care

the oil life system to work properly,the system must be reset every timethe oil is changed.

When the system has calculatedthat oil life has been diminished, itindicates that an oil change isnecessary. A CHANGE ENGINEOIL SOON message comes on. SeeEngine Oil Messages on page 5-42.Change the oil as soon as possiblewithin the next 1 000 km (600 mi).It is possible that, if driving underthe best conditions, the oil lifesystem might indicate that an oilchange is not necessary for up to ayear. The engine oil and filter mustbe changed at least once a yearand at this time the system must bereset. Your dealer has trainedservice people who will perform thiswork and reset the system. It is alsoimportant to check the oil regularlyover the course of an oil draininterval and keep it at the properlevel.

If the system is ever resetaccidentally, the oil must bechanged at 5 000 km (3,000 mi)since the last oil change.Remember to reset the oil lifesystem whenever the oil is changed.

How to Reset the Engine OilLife System

Reset the system whenever theengine oil is changed so that thesystem can calculate the nextengine oil change. To reset thesystem:

1. Using the DIC controls on theright side of the steering wheel,display REMAINING OIL LIFEon the DIC. See DriverInformation Center (DIC) (BaseLevel Cluster) on page 5-33 orDriver Information Center (DIC)(Uplevel Cluster) on page 5-35.When remaining oil life is low,the CHANGE ENGINE OILSOON message will appear onthe display. See Engine OilMessages on page 5-42.

2. Press V on the DIC controls andhold down for a few seconds toclear the CHANGE ENGINE OILSOON message and reset theoil life at 100%.

Be careful not to reset the oil lifedisplay accidentally at any timeother than after the oil ischanged. It cannot be resetaccurately until the next oilchange.

The system is reset when theCHANGE ENGINE OIL SOONmessage is off.

If the CHANGE ENGINE OIL SOONmessage comes back on when thevehicle is started, the engine oil lifesystem has not been reset. Repeatthe procedure.


Vehicle Care 10-15

Automatic TransmissionFluid

How to Check AutomaticTransmission Fluid

It is not necessary to check thetransmission fluid level.A transmission fluid leak is the onlyreason for fluid loss. If a leakoccurs, take the vehicle to yourdealer and have it repaired as soonas possible.

There is a special procedure forchecking and changing thetransmission fluid. Because thisprocedure is difficult, you shouldhave this done at your dealer.Contact your dealer for additionalinformation. The procedure can befound in the service manual. Topurchase a service manual, seeService Publications OrderingInformation on page 13-11.

Change the fluid at the intervalslisted in Maintenance Schedule onpage 11-2, and be sure to use thefluid listed in Recommended Fluidsand Lubricants on page 11-11.

Manual TransmissionFluidIt is not necessary to check themanual transmission fluid level.A transmission fluid leak is the onlyreason for fluid loss. If a leakoccurs, take the vehicle to yourdealer and have it repaired as soonas possible. See RecommendedFluids and Lubricants on page 11-11for the proper fluid to use.

Hydraulic ClutchFor vehicles with a manualtransmission, it is not necessary toregularly check brake/clutch fluidunless there is a leak suspected.Adding fluid will not correct a leak.A fluid loss in this system couldindicate a problem. Have thesystem inspected and repaired.

When to Check and Whatto Use

The brake/hydraulic clutch fluidreservoir cap has this symbol on it.The common hydraulic clutch andbrake master cylinder fluid reservoiris filled with DOT 3 brake fluid asindicated on the reservoir cap. SeeEngine Compartment Overview onpage 10-6 for reservoir location.

How to Check and Add Fluid

Visually check the brake/clutch fluidreservoir to make sure the fluid levelis at the MIN (minimum) line on theside of the reservoir. The brake/hydraulic clutch fluid system shouldbe closed and sealed.


10-16 Vehicle Care

Do not remove the cap to check thefluid level or to top off the fluid level.Remove the cap only whennecessary to add the proper fluiduntil the level reaches the MIN line.

Engine Air Cleaner/FilterSee Engine Compartment Overviewon page 10-6 for the location of theengine air cleaner/filter.

When to Inspect the Engine AirCleaner/Filter

Inspect/replace the air cleaner/filterat the scheduled maintenanceintervals listed in MaintenanceSchedule on page 11-2. If you aredriving in dusty/dirty conditions,inspect the filter at each engine oilchange.

How to Inspect the Engine AirCleaner/Filter

To inspect the air cleaner/filter,remove the filter from the vehicleand lightly shake the filter to release

loose dust and dirt. If the filterremains covered with dirt, a newfilter is required.


1. Screws

2. Electrical Connector

3. Air Duct Clamp

To inspect or replace the engine aircleaner/filter:

1. Disconnect the outlet duct byloosening the air duct clamp (3).

2. Disconnect the electricalconnector (2).

3. Remove the screws (1) on top ofthe engine air cleaner/filterhousing.

4. Lift the filter cover housing awayfrom the air cleaner/filterhousing.

5. Pull out the filter.

6. Inspect or replace the engine aircleaner/filter.

7. Reverse Steps 2–4 to reinstallthe filter cover housing.


Vehicle Care 10-17

2.4L L4 Engine without eAssistShown, 2.4L L4 Engine with

eAssist Similar

1. Screws

2. Air Duct Clamp

3. Electrical Connector

To inspect or replace the engine aircleaner/filter:

1. Open the hood. See Hood onpage 10-4.

2. Disconnect the outlet duct byloosening the air duct clamp (2).

3. Disconnect the electricalconnector (3).

4. Remove the screws (1) on top ofthe engine air cleaner/filterhousing.

5. Lift the filter cover housing awayfrom the engine air cleaner/filterhousing.

6. Pull out the filter.

7. Inspect or replace the engine aircleaner/filter.

8. Reverse Steps 2–4 to reinstallthe filter cover housing.

{ Warning

Operating the engine with the aircleaner/filter off can cause you orothers to be burned. The aircleaner not only cleans the air; ithelps to stop flames if the enginebackfires. Use caution whenworking on the engine and do notdrive with the air cleaner/filter off.

{ Caution

If the air cleaner/filter is off, dirtcan easily get into the engine,which could damage it. Alwayshave the air cleaner/filter in placewhen you are driving.

Cooling SystemThe cooling system allows theengine to maintain the correctworking temperature.


10-18 Vehicle Care

When it is safe to lift the hood:


1. Engine Cooling Fans (Outof View)

2. Coolant Surge Tank andPressure Cap

2.4L L4 Engine without eAssist



2.4L L4 Engine with eAssist



{ Warning

An electric engine cooling fanunder the hood can start up evenwhen the engine is not runningand can cause injury. Keephands, clothing, and tools awayfrom any underhood electric fan.


Vehicle Care 10-19

{ Warning

Heater and radiator hoses, andother engine parts, can be veryhot. Do not touch them. If you do,you can be burned.

Do not run the engine if there is aleak. If you run the engine, itcould lose all coolant. That couldcause an engine fire, and youcould be burned. Get any leakfixed before you drive the vehicle.

{ Caution

Using coolant other thanDEX-COOL® can causepremature engine, heater core,or radiator corrosion. In addition,the engine coolant could requirechanging sooner. Any repairswould not be covered by the

(Continued)

Caution (Continued)

vehicle warranty. Always useDEX-COOL (silicate-free) coolantin the vehicle.

Engine CoolantThe cooling system in the vehicle isfilled with DEX-COOL® enginecoolant. This coolant is designed toremain in the vehicle for 5 years or240 000 km (150,000 mi), whicheveroccurs first.

The following explains the coolingsystem and how to check and addcoolant when it is low. If there is aproblem with engine overheating,see Engine Overheating onpage 10-22.

What to Use

{ Warning

Adding only plain water or someother liquid to the cooling systemcan be dangerous. Plain waterand other liquids, can boil beforethe proper coolant mixture will.The coolant warning system is setfor the proper coolant mixture.With plain water or the wrongmixture, the engine could get toohot but you would not get theoverheat warning. The enginecould catch fire and you or otherscould be burned. Use a 50/50 mixture of clean, drinkablewater and DEX-COOL coolant.

Use a 50/50 mixture of clean,drinkable water and DEX-COOLcoolant. If using this mixture,nothing else needs to be added.


10-20 Vehicle Care

This mixture:. Gives freezing protection down

to −37°C (−34°F), outsidetemperature.

. Gives boiling protection up to129°C (265°F), enginetemperature.

. Protects against rust andcorrosion.

. Will not damage aluminum parts.

. Helps keep the proper enginetemperature.

{ Caution

If improper coolant mixture,inhibitors, or additives are used inthe vehicle cooling system, theengine could overheat and bedamaged. Too much water in themixture can freeze and crackengine cooling parts. The repairswould not be covered by thevehicle warranty. Use only the

(Continued)

Caution (Continued)

proper mixture of engine coolantfor the cooling system. SeeRecommended Fluids andLubricants on page 11-11.

Never dispose of engine coolant byputting it in the trash, pouring it onthe ground, or into sewers, streams,or bodies of water. Have the coolantchanged by an authorized servicecenter, familiar with legalrequirements regarding usedcoolant disposal. This will helpprotect the environment and yourhealth.

Checking Coolant

The vehicle must be on a levelsurface when checking the coolantlevel.

Check to see if coolant is visible inthe coolant surge tank. If the coolantinside the coolant surge tank isboiling, do not do anything else untilit cools down.

If coolant is visible but the coolantlevel is not at or above the markpointed to, add a 50/50 mixture ofclean drinkable water andDEX-COOL coolant.

Be sure the cooling system is coolbefore this is done.

If no coolant is visible in the coolantsurge tank, add coolant as follows:

How to Add Coolant to theCoolant Surge Tank

{ Caution

This vehicle has a specificcoolant fill procedure. Failure tofollow this procedure could causethe engine to overheat and beseverely damaged.

If no problem is found, check to seeif coolant is visible in the coolantsurge tank. If coolant is visible butthe coolant level is not at theindicated level mark, add a50/50 mixture of clean, drinkable


Vehicle Care 10-21

water and DEX-COOL coolant at thecoolant surge tank, but be sure thecooling system, including thecoolant surge tank pressure cap, iscool before you do it.

{ Warning

Steam and scalding liquids from ahot cooling system can blow outand burn you badly. Never turnthe cap when the cooling system,including the surge tank pressurecap, is hot. Wait for the coolingsystem and surge tank pressurecap to cool.

{ Caution

In cold weather, water can freezeand crack the engine, radiator,heater core, and other parts. Usethe recommended coolant andthe proper coolant mixture.

{ Warning

You can be burned if you spillcoolant on hot engine parts.Coolant contains ethylene glycoland it will burn if the engine partsare hot enough. Do not spillcoolant on a hot engine.

2.0L L4 Turbo Engine Shown, 2.4LL4 Engine with or without eAssist

Similar

1. Remove the coolant surge tankpressure cap when the coolingsystem, including the coolantsurge tank pressure cap andupper radiator hose, is nolonger hot.

Turn the pressure cap slowlycounterclockwise aboutone-quarter of a turn. If you heara hiss, wait for that to stop. Thiswill allow any pressure still left tobe vented out thedischarge hose.

2. Keep turning the pressure capslowly and remove it.


10-22 Vehicle Care

3. Fill the coolant surge tank withthe proper DEX-COOL coolantmixture to the indicatedlevel mark.

4. With the coolant surge tankpressure cap off, start theengine and let it run until youcan feel the upper radiator hosegetting hot. Watch out for theengine cooling fans.

By this time, the coolant levelinside the coolant surge tankmay be lower. If the level islower, add more of the properDEX-COOL coolant mixture to

the coolant surge tank until thelevel reaches the indicatedlevel mark.

5. Replace the pressure cap tightly.

Check the level in the coolant surgetank when the cooling system hascooled down. If the coolant is not atthe proper level, repeat Steps 1–3 and reinstall the pressure cap.If the coolant still is not at the properlevel when the system cools downagain, see your dealer.

Engine OverheatingThe vehicle has an engine coolanttemperature gauge and may alsohave an engine coolant temperaturewarning light on the instrumentcluster to warn of engineoverheating. See Engine CoolantTemperature Gauge on page 5-18and Engine Coolant TemperatureWarning Light on page 5-28.

If it is decided not to lift the hoodwhen this warning appears, butinstead get service help right away,see Roadside Assistance Programon page 13-5.

If it is decided to lift the hood, makesure the vehicle is parked on a levelsurface.

Then check to see if the enginecooling fans are running. If theengine is overheating, both fansshould be running. If they are not,do not continue to run the engineand have the vehicle serviced.

{ Caution

Running the engine withoutcoolant may cause damage or afire. Vehicle damage would not becovered by the vehicle warranty.


Vehicle Care 10-23

If Steam Is Coming from theEngine Compartment

{ Warning

Steam from an overheated enginecan burn you badly, even if youjust open the hood. Stay awayfrom the engine if you see or hearsteam coming from it. Just turn itoff and get everyone away fromthe vehicle until it cools down.Wait until there is no sign ofsteam or coolant before you openthe hood.

If you keep driving when theengine is overheated, the liquidsin it can catch fire. You or otherscould be badly burned. Stop theengine if it overheats, and get outof the vehicle until the engineis cool.

If No Steam Is Coming fromthe Engine Compartment

If an engine overheat warning isdisplayed but no steam can be seenor heard, the problem may not betoo serious. Sometimes the enginecan get a little too hot when thevehicle:. Climbs a long hill on a hot day.. Stops after high-speed driving.. Idles for long periods in traffic.

If the overheat warning is displayedwith no sign of steam:

1. Turn the air conditioning off.

2. Turn the heater on to the highesttemperature and to the highestfan speed. Open the windows asnecessary.

3. When it is safe to do so, pull offthe road, shift to P (Park) orN (Neutral), and let theengine idle.

If the engine coolant temperaturegauge is no longer in the overheatzone or the engine coolant

temperature warning light no longerdisplays, the vehicle can be driven.Continue to drive the vehicle slowlyfor about 10 minutes. Keep a safevehicle distance from the vehicle infront. If the warning does not comeback on, continue to drive normallyand have the cooling systemchecked for proper fill and function.

If the warning continues, pull over,stop, and park the vehicleright away.

If there is no sign of steam, idle theengine for three minutes whileparked. If the warning is stilldisplayed, turn off the engine until itcools down.

Washer Fluid

What to Use

When windshield washer fluid isneeded, be sure to read themanufacturer's instructions beforeuse. If operating the vehicle in anarea where the temperature may fall


10-24 Vehicle Care

below freezing, use a fluid that hassufficient protection againstfreezing.

Adding Washer Fluid

Open the cap with the washersymbol on it. Add washer fluid untilthe tank is full. See EngineCompartment Overview onpage 10-6 for reservoir location.

{ Caution

. Do not use engine coolant(antifreeze) in the windshieldwasher. It can damage thewindshield washer systemand paint.

(Continued)

Caution (Continued)

. Do not mix water withready-to-use washer fluid.Water can cause the solutionto freeze and damage thewasher fluid tank and otherparts of the washer system.

. When using concentratedwasher fluid, follow themanufacturer instructions foradding water.

. Fill the washer fluid tank onlythree-quarters full when it isvery cold. This allows for fluidexpansion if freezing occurs,which could damage the tankif it is completely full.

BrakesThis vehicle has disc brakes. Discbrake pads have built-in wearindicators that make a high-pitchedwarning sound when the brake padsare worn and new pads are needed.The sound can come and go or be

heard all the time when the vehicleis moving, except when applying thebrake pedal firmly.

{ Warning

The brake wear warning soundmeans that soon the brakes willnot work well. That could lead toa crash. When the brake wearwarning sound is heard, have thevehicle serviced.

{ Caution

Continuing to drive with worn-outbrake pads could result in costlybrake repair.

Some driving conditions or climatescan cause a brake squeal when thebrakes are first applied or lightlyapplied. This does not meansomething is wrong with the brakes.


Vehicle Care 10-25

Properly torqued wheel nuts arenecessary to help prevent brakepulsation. When tires are rotated,inspect brake pads for wear andevenly tighten wheel nuts in theproper sequence to torquespecifications. See Capacities andSpecifications on page 12-2.

Brake pads should be replaced ascomplete sets.

Brake Pedal Travel

See your dealer if the brake pedaldoes not return to normal height,or if there is a rapid increase inpedal travel. This could be a signthat brake service might berequired.

Brake Adjustment

Every time the brakes are applied,with or without the vehicle moving,the brakes adjust for wear.

Replacing Brake System Parts

The braking system on a vehicle iscomplex. Its many parts have to beof top quality and work well together

if the vehicle is to have really goodbraking. The vehicle was designedand tested with top-quality brakeparts. When parts of the brakingsystem are replaced, be sure to getnew, approved replacement parts.If this is not done, the brakes mightnot work properly. For example,installing disc brake pads that arewrong for the vehicle, can changethe balance between the front andrear brakes — for the worse. Thebraking performance expected canchange in many other ways if thewrong replacement brake parts areinstalled.

Brake Fluid

The brake/clutch master cylinderreservoir is filled with DOT 3 brakefluid as indicated on the reservoir

cap. See Engine CompartmentOverview on page 10-6 for thelocation of the reservoir.

There are only two reasons why thebrake fluid level in the reservoirmight go down:. The brake fluid level goes down

because of normal brake liningwear. When new linings areinstalled, the fluid level goesback up.

. A fluid leak in the brake/clutchhydraulic system can also causea low fluid level. Have the brake/clutch hydraulic system fixed,since a leak means that sooneror later the brakes will notwork well.

Do not top off the brake/clutch fluid.Adding fluid does not correct a leak.If fluid is added when the linings areworn, there will be too much fluidwhen new brake linings areinstalled. Add or remove fluid, asnecessary, only when work is doneon the brake/clutch hydraulicsystem.


10-26 Vehicle Care

{ Warning

If too much brake fluid is added, itcan spill on the engine and burn,if the engine is hot enough. Youor others could be burned, andthe vehicle could be damaged.Add brake fluid only when work isdone on the brake/clutchhydraulic system.

Checking Brake Fluid

The brake/clutch fluid can bechecked without taking off the capby looking at the brake/clutch fluidreservoir.

The fluid level should be aboveMIN. If it is not, have the brake/clutch hydraulic system checked tosee if there is a leak.

After work is done on the brake/clutch hydraulic system, make surethe level is above MIN but not overthe MAX mark.

When the brake/clutch fluid falls to alow level, the brake warning lightcomes on. See Brake SystemWarning Light on page 5-24.

What to Add

Use only new DOT 3 brake fluidfrom a sealed container. SeeRecommended Fluids andLubricants on page 11-11.

Always clean the brake/clutch fluidreservoir cap and the area aroundthe cap before removing it. Thishelps keep dirt from entering thereservoir.

{ Warning

With the wrong kind of fluid in thebrake/clutch hydraulic system, thebrakes might not work well. Thiscould cause a crash. Always usethe proper brake/clutch fluid.

{ Caution

. Using the wrong fluid canbadly damage brake/clutchhydraulic system parts. Forexample, just a few drops ofmineral-based oil, such asengine oil, in the brakehydraulic system can damagebrake hydraulic system partsso badly that they will have tobe replaced. Do not letsomeone put in the wrongkind of fluid.

. If brake fluid is spilled on thevehicle's painted surfaces,the paint finish can bedamaged. Be careful not tospill brake fluid on thevehicle. If you do, wash it offimmediately.


Vehicle Care 10-27

BatteryThis vehicle has a standard 12-voltbattery. Refer to the replacementnumber on the original battery labelwhen a new standard 12-volt batteryis needed.

eAssist vehicles also have a highvoltage battery. Only a trainedservice technician with the properknowledge and tools should inspect,test, or replace the high voltagebattery. See your dealer if the highvoltage battery needs service. Thedealer has information on how torecycle the high voltage battery.There is also information availableat http://www.recyclemybattery.com.

The eAssist system high voltagebattery is cooled with air drawn fromthe vehicle interior. The cold airintake for the battery is behind therear seat, on the filler panel. Do notcover the intake.

{ Warning

Battery posts, terminals, andrelated accessories contain leadand lead compounds, chemicalsknown to the State of California tocause cancer and reproductiveharm. Wash hands after handling.

Vehicle Storage

{ Warning

Batteries have acid that can burnyou and gas that can explode.You can be badly hurt if you arenot careful. See Jump Starting(with or without eAssist) onpage 10-79 or Jump Starting(On-board with eAssist Only) onpage 10-77 for tips on workingaround a battery withoutgetting hurt.

Infrequent Usage: Remove the12-volt battery black, negative (−)cable from the battery to keep thebattery from running down.

Extended Storage: Remove the12-volt battery black, negative (−)cable from the battery or use abattery trickle charger.

Remember to reconnect the batterywhen ready to drive the vehicle.


10-28 Vehicle Care

All-Wheel Drive

Transfer Case

Under normal driving conditions,transfer case fluid does not requirechanging or checking unless thereis a fluid leak or unusual noise.If required, have the transfer caseserviced by your dealer.

Starter Switch Check

{ Warning

When you are doing thisinspection, the vehicle couldmove suddenly. If the vehiclemoves, you or others could beinjured.

1. Before starting this check, besure there is enough roomaround the vehicle.

2. Apply both the parking brakeand the regular brake.

Do not use the acceleratorpedal, and be ready to turn offthe engine immediately if itstarts.

3. For automatic transmissionvehicles, try to start the enginein each gear. The vehicle shouldstart only in P (Park) orN (Neutral). If the vehicle startsin any other position, contactyour dealer for service.

For manual transmissionvehicles, put the shift lever inNeutral, push the clutch pedaldown halfway, and try to startthe engine. The vehicle shouldstart only when the clutch pedalis pushed down all the way tothe floor. If the vehicle startswhen the clutch pedal is notpushed all the way down,contact your dealer for service.

Automatic TransmissionShift Lock ControlFunction Check

{ Warning

When you are doing thisinspection, the vehicle couldmove suddenly. If the vehiclemoves, you or others could beinjured.

1. Before starting this check, besure there is enough roomaround the vehicle. It should beparked on a level surface.

2. Apply the parking brake. Beready to apply the regular brakeimmediately if the vehicle beginsto move.

3. With the engine off, turn theignition on, but do not start theengine. Without applying theregular brake, try to move theshift lever out of P (Park) with


Vehicle Care 10-29

normal effort. If the shift levermoves out of P (Park), contactyour dealer for service.

Ignition TransmissionLock CheckWhile parked, and with the parkingbrake set, try to turn the ignition toLOCK/OFF in each shift leverposition.. For automatic transmission

vehicles, the ignition should turnto LOCK/OFF only when theshift lever is in P (Park). Theignition key should come outonly in LOCK/OFF.

. For manual transmissionvehicles, the ignition key shouldcome out only in LOCK/OFF.

Contact your dealer if service isrequired.

Park Brake and P (Park)Mechanism Check

{ Warning

When you are doing this check,the vehicle could begin to move.You or others could be injuredand property could be damaged.Make sure there is room in frontof the vehicle in case it begins toroll. Be ready to apply the regularbrake at once should the vehiclebegin to move.

Park on a fairly steep hill, with thevehicle facing downhill. Keepingyour foot on the regular brake, setthe parking brake.. To check the parking brake's

holding ability: With the enginerunning and the transmission inN (Neutral), slowly remove footpressure from the regular brakepedal. Do this until the vehicle isheld by the parking brake only.

. To check the P (Park)mechanism's holding ability:With the engine running, shift toP (Park). Then release theparking brake followed by theregular brake.

Contact your dealer if service isrequired.

Wiper Blade ReplacementWindshield wiper blades should beinspected for wear or cracking.

It is a good idea to clean the wiperblade assembly on a regular basis.When worn, or when cleaning isineffective, replace the wiper blade.For proper windshield wiper bladelength and type, see MaintenanceReplacement Parts on page 11-12.

{ Caution

Allowing the wiper arm to touchthe windshield when no wiperblade is installed could damage

(Continued)


10-30 Vehicle Care

Caution (Continued)

the windshield. Any damage thatoccurs would not be covered byyour warranty. Do not allow thewiper arm to touch the windshield.

To replace the wiper blade:

1. Pull the wiper assembly awayfrom the windshield.

2. Lift up on the latch in the middleof the wiper blade where thewiper arm attaches.

3. With the latch open, pull thewiper blade down toward thewindshield far enough to releaseit from the J-hooked end of thewiper arm.

4. Remove the wiper blade.

5. Reverse Steps 1–3 for wiperblade replacement.

Headlamp AimingHeadlamp aim has been preset andshould need no further adjustment.

If the vehicle is damaged in a crash,the headlamp aim may be affected.If adjustment to the headlamps isnecessary, see your dealer.


Vehicle Care 10-31

Bulb ReplacementFor the proper type of replacementbulbs, see Replacement Bulbs onpage 10-34.

For any bulb‐changing procedurenot listed in this section, contactyour dealer.

Halogen Bulbs

{ Warning

Halogen bulbs have pressurizedgas inside and can burst if youdrop or scratch the bulb. You orothers could be injured. Be sureto read and follow the instructionson the bulb package.

High Intensity Discharge(HID) Lighting

{ Warning

The high intensity dischargelighting system operates at a veryhigh voltage. If you try to serviceany of the system components,you could be seriously injured.Have your dealer or a qualifiedtechnician service them.

After an HID headlamp bulb hasbeen replaced, the beam might be aslightly different shade than it wasoriginally. This is normal.

Headlamps, Front TurnSignal and ParkingLamps

Base Headlamp Assembly(Passenger Side Shown, Driver

Side Similar)


10-32 Vehicle Care

Uplevel Headlamp Assembly(Passenger Side Shown, Driver

Side Similar)

Low Beam Headlamp/DaytimeRunning Lamp (Base)

1. For the driver side bulb, removethe windshield washer bottlefiller neck by firmly pulling itstraight up and out of the bottle.

2. Remove the cap from the backof the headlamp assembly.

3. Disconnect the electricalconnector.

4. Remove the bulb socket fromthe headlamp assembly.

5. Reverse steps 1–4 to install.

High/Low-Beam Headlamps(Uplevel)

The high/low-beam headlamps onthe uplevel headlamp system areHigh Intensity Discharge (HID) andshould be replaced at the dealer.

Front Turn Signal andSidemarker Lamps (Base andUplevel)

1. Remove the bulb socket fromthe headlamp assembly.

2. Remove the bulb from thesocket.

3. Reverse steps 1–2 to install.

Fog LampsTo replace the fog lamp bulb:

1. Locate the bulb assembly underthe front fascia.

2. Disconnect the electricalconnector from the bulbassembly.

3. Remove the bulb by turning itcounterclockwise and pulling itstraight out of the assembly.

4. Install the new bulb by turning itclockwise into the assembly.

5. Reconnect the electricalconnector to the bulb assembly.


Vehicle Care 10-33

Taillamps, Turn Signal,Stoplamps, and Back-UpLamps

1. Taillamp

2. Taillamp/Sidemarker Lamp

3. Stop/Turn Signal Lamp

4. Back-up Lamp

To replace any one of these bulbs:

1. Open the trunk. See TrunkRelease on page 1-7.

2. Remove the trunk trim panelpush pin.

3. Pull the trunk trim panel back togain access to the taillampassembly.

4. Remove the two nuts thatsecure the taillamp assembly.

5. Remove the taillamp assemblyand disconnect the wiringharness connector.

6. Turn the bulb socketcounterclockwise to remove it.

7. Pull the bulb from the socket.

8. Install a new bulb.

9. Turn the bulb socket clockwiseto install it.

10. Reverse Steps 2–4 to reinstallthe taillamp assembly.

License Plate Lamp

Lamp Assembly

Bulb Assembly


10-34 Vehicle Care

1. Bulb Socket

2. Bulb

3. Lamp Assembly

To replace one of these bulbs:

1. Push the release tab toward thelamp assembly.

2. Pull the lamp assembly down toremove.

3. Turn the bulb socket (1)counterclockwise to remove itfrom the lamp assembly (3).

4. Pull the bulb (2) straight out ofthe bulb socket (1).

5. Push the replacement bulbstraight into the bulb socket andturn the bulb socket clockwise toinstall it into the lamp assembly.

6. Push the lamp assembly backinto position until the release tablocks into place.

Replacement Bulbs

Exterior LampBulb

Number

Back-up Lamp 3157 K

Fog Lamp H10

Front Turn SignalLamp (Base)

WY21W

Front Turn SignalLamp (Uplevel)

PSY24W

Front SidemarkerLamp (Base)

194NA

Low-BeamHeadlamp (Base)

HIR2

License Plate Lamp 194

Daytime RunningLamp (DRL) (Base)

W21/5W ULL

Stoplamp/TurnSignal Lamp

3157 K

Taillamp/Sidemarker Lamp

3157 K

For replacement bulbs not listedhere, contact your dealer.

Electrical System

High Voltage Devices andWiring

{ Warning

Exposure to high voltage cancause shock, burns, and evendeath. The high voltagecomponents in the vehicle canonly be serviced by technicianswith special training.

High voltage components areidentified by labels. Do notremove, open, take apart,or modify these components.High voltage cable or wiring hasorange covering. Do not probe,tamper with, cut, or modify highvoltage cable or wiring.


Vehicle Care 10-35

Electrical SystemOverloadThe vehicle has fuses and circuitbreakers to protect against anelectrical system overload.

When the current electrical load istoo heavy, the circuit breaker opensand closes, protecting the circuituntil the current load returns tonormal or the problem is fixed. Thisgreatly reduces the chance of circuitoverload and fire caused byelectrical problems.

Fuses and circuit breakers protectpower devices in the vehicle.

Replace a bad fuse with a new oneof the identical size and rating.

If there is a problem on the road anda fuse needs to be replaced, thesame amperage fuse can beborrowed. Choose some feature ofthe vehicle that is not needed to useand replace it as soon as possible.

Headlamp Wiring

An electrical overload may causethe lamps to go on and off, or insome cases to remain off. Have theheadlamp wiring checked right awayif the lamps go on and off orremain off.

Windshield Wipers

If the wiper motor overheats due toheavy snow or ice, the windshieldwipers will stop until the motor coolsand will then restart.

Although the circuit is protectedfrom electrical overload, overloaddue to heavy snow or ice maycause wiper linkage damage.Always clear ice and heavy snowfrom the windshield before using thewindshield wipers.

If the overload is caused by anelectrical problem and not snow orice, be sure to get it fixed.

Fuses and CircuitBreakersThe wiring circuits in the vehicle areprotected from short circuits by acombination of fuses and circuitbreakers. This greatly reduces thechance of damage caused byelectrical problems.

To check a fuse, look at thesilver-colored band inside the fuse.If the band is broken or melted,replace the fuse. Be sure to replacea bad fuse with a new one of theidentical size and rating.

Fuses of the same amperage canbe temporarily borrowed fromanother fuse location, if a fuse goesout. Replace the fuse as soon aspossible.

To identify and check fuses, circuitbreakers, and relays, see EngineCompartment Fuse Block onpage 10-36 and Instrument PanelFuse Block on page 10-39.


10-36 Vehicle Care

Engine CompartmentFuse Block

To remove the fuse block cover,press the three retaining clips on thecover and lift it straight up.

{ Caution

Spilling liquid on any electricalcomponent on the vehicle maydamage it. Always keep thecovers on any electricalcomponent.

Engine Compartment Fuse Block


Vehicle Care 10-37

The vehicle may not be equippedwith all of the fuses, relays, andfeatures shown.

FuseNumber

Usage

1 TransmissionControl Module

2 Engine ControlModule

3 Not Used

4 Not Used

5 Ignition,TransmissionControl Module,Engine ControlModule

6 Windshield Wiper

7 BPIM (eAssist Only)

8 Not Used

9 Fuel Injection,Ignition System

10 Engine ControlModule

FuseNumber

Usage

11 Oxygen Sensor

12 Starter

13 Fuel System ControlModule

14 Trunk Release

15 MGU Coolant Pump(eAssist Only)

16 Heated SteeringWheel

17 Not Used

18 BPIM (eAssist Only)

19 Not Used

20 Not Used

21 Rear PowerWindows

22 Antilock BrakeSystem Valve

23 Obstacle Detection

FuseNumber

Usage

24 Front PowerWindows

25 Power Outlets

26 Antilock BrakeSystem Pump

27 Electric ParkingBrake

28 Heated RearWindow

29 Left-Hand SeatLumbar

30 Right-Hand SeatLumbar

31 A/C Clutch

32 Body ControlModule 6

33 Heated Front Seats

34 Sunroof

35 Infotainment System

36 Adaptive Cruise


10-38 Vehicle Care

FuseNumber

Usage

37 Right-HandHigh-BeamHeadlamp

38 Left-HandHigh-BeamHeadlamp

39 All-Wheel Drive

40 Not Used

41 Vacuum Pump

42 Radiator Fan

43 Passive Entry/Passive Start

44 TransmissionAuxiliary Pump(eAssist Only)

45 Radiator Fan

46 Terminal 87, MainRelay

47 Oxygen Sensor

48 Fog Lamps

FuseNumber

Usage

49 Right-Hand LowBeam, High IntensityDischargeHeadlamp

50 Left-Hand LowBeam, High IntensityDischargeHeadlamp

51 Horn

52 MotorIndicator Lamp

53 Inside RearviewMirror

54 Rear Camera

55 Power Windows/Mirrors

56 Windshield Washer

57 Not Used

58 Not Used

FuseNumber

Usage

59 Secondary AirInduction(eAssist Only)

60 Heated Mirrors

61 Not Used

62 Canister VentSolenoid

63 Not Used

64 Heater, Ventilation,and Air ConditioningPump (eAssist Only)

65 Not Used

66 SAI Check Valve(eAssist Only)

67 Fuel System ControlModule

68 Not Used

69 Battery Sensor

70 Right Low BeamHeadlamp/DRL


Vehicle Care 10-39

FuseNumber

Usage

71 Not Used

RelayNumber

Usage

1 Air ConditioningControl

2 Starter

3 Not Used

4 Front Wiper (Step 2)

5 Front Wiper (Step 1,Interval)

6 Right Low BeamHeadlamp/DRL

7 Main Relay

8 Auxiliary HeaterPump (eAssist Only)

9 Cooling Fan

10 Cooling Fan

RelayNumber

Usage

11 TransmissionAuxiliary Pump(eAssist Only)

12 Not Used

13 Cooling Fan

14 High IntensityDischargeHeadlamp/Left LowBeamHeadlamp/DRL

15 Ignition

16 Secondary AIRPump (eAssist Only)

17 Window/MirrorDefog

Instrument Panel FuseBlock

The instrument panel fuse block islocated in the instrument panel, onthe driver side of the vehicle.

To access the fuses, open thestorage compartment. Press in onthe sides of the compartment torelease it from the instrument panel.Pull the door toward you to releaseit from the hinge.


10-40 Vehicle Care

Instrument Panel Fuse Block

Number Usage

1 Suspension ControlModule/UniversalGarage DoorOpener/ESC



4 Radio

Number Usage

5 Radio Displays,Park Assist,Infotainment,Module TunnelControl

6 Instrument PanelPower Outlet

7 Console PowerOutlet




11 Front HeaterVentilation AirConditioning/Blower

12 Right-Hand PowerFront Seat

13 Left-Hand PowerFront Seat

Number Usage

14 Diagnostic LinkConnector

15 Airbag

16 Steering WheelControls

17 Heating VentilationAir ConditioningController

18 Service Fuse,Logistic Relay

19 Memory Seats

20 Automatic OccupantSensing

21 Instrument Cluster

22 Discrete LogicIgnitionSwitch/PEPS




Vehicle Care 10-41

Number Usage

25 OnStar

26 Spare

Wheels and Tires

TiresEvery new GM vehicle hashigh-quality tires made by aleading tire manufacturer. Seethe warranty manual forinformation regarding the tirewarranty and where to getservice. For additionalinformation refer to the tiremanufacturer.

{ Warning

. Poorly maintained andimproperly used tires aredangerous.

. Overloading the tires cancause overheating as aresult of too much flexing.There could be a blowout

(Continued)

Warning (Continued)

and a serious crash. SeeVehicle Load Limits onpage 9-10.

. Underinflated tires posethe same danger asoverloaded tires. Theresulting crash couldcause serious injury.Check all tires frequentlyto maintain therecommended pressure.Tire pressure should bechecked when the tiresare cold.

. Overinflated tires are morelikely to be cut, punctured,or broken by a suddenimpact — such as whenhitting a pothole. Keeptires at the recommendedpressure.

(Continued)


10-42 Vehicle Care

Warning (Continued)

. Worn or old tires cancause a crash. If the treadis badly worn,replace them.

. Replace any tires thathave been damaged byimpacts with potholes,curbs, etc.

. Improperly repaired tirescan cause a crash. Onlythe dealer or anauthorized tire servicecenter should repair,replace, dismount, andmount the tires.

. Do not spin the tires inexcess of 56 km/h(35 mph) on slipperysurfaces such as snow,mud, ice, etc. Excessivespinning may cause thetires to explode.

See Tire Pressure forHigh-Speed Operation onpage 10-50 for inflation pressureadjustment for high-speeddriving.

All-Season TiresThis vehicle may come withall-season tires. These tires aredesigned to provide good overallperformance on most road surfacesand weather conditions. Originalequipment tires designed to GM'sspecific tire performance criteriahave a TPC specification codemolded onto the sidewall. Originalequipment all-season tires can beidentified by the last two charactersof this TPC code, which willbe “MS.”

Consider installing winter tires onthe vehicle if frequent driving onsnow or ice-covered roads isexpected. All-season tires provideadequate performance for mostwinter driving conditions, but theymay not offer the same level of

traction or performance as wintertires on snow or ice-covered roads.See Winter Tires on page 10-42.

Winter TiresThis vehicle was not originallyequipped with winter tires. Wintertires are designed for increasedtraction on snow and ice-coveredroads. Consider installing wintertires on the vehicle if frequentdriving on ice or snow coveredroads is expected. See your dealerfor details regarding winter tireavailability and proper tire selection.Also, see Buying New Tires onpage 10-57.

With winter tires, there may bedecreased dry road traction,increased road noise, and shortertread life. After changing to wintertires, be alert for changes in vehiclehandling and braking.

If using winter tires:. Use tires of the same brand and

tread type on all four wheelpositions.


Vehicle Care 10-43

. Use only radial ply tires of thesame size, load range, andspeed rating as the originalequipment tires.

Winter tires with the same speedrating as the original equipment tiresmay not be available for H, V, W, Y,and ZR speed rated tires. If wintertires with a lower speed rating arechosen, never exceed the tire'smaximum speed capability.

Summer TiresThis vehicle may come with highperformance summer tires. Thesetires have a special tread andcompound that are optimized formaximum dry and wet roadperformance. This special tread andcompound will decreaseperformance in cold climates, andon ice and snow. We recommendinstalling winter tires on the vehicleif frequent driving in coldtemperatures or on snow or icecovered roads is expected. SeeWinter Tires on page 10-42.

Tire Sidewall LabelingUseful information about a tire ismolded into its sidewall. Theexamples show a typicalpassenger vehicle tire and acompact spare tire sidewall.

Passenger (P-Metric) Tire Example

(1) Tire Size: The tire size is acombination of letters andnumbers used to define aparticular tire's width, height,aspect ratio, construction type,

and service description. See the“Tire Size” illustration later in thissection.

(2) TPC Spec (TirePerformance CriteriaSpecification): Originalequipment tires designed toGM's specific tire performancecriteria have a TPC specificationcode molded onto the sidewall.GM's TPC specifications meet orexceed all federal safetyguidelines.

(3) DOT (Department ofTransportation): TheDepartment of Transportation(DOT) code indicates that thetire is in compliance with theU.S. Department ofTransportation Motor VehicleSafety Standards.

DOT Tire Date ofManufacture: The last fourdigits of the TIN indicate the tiremanufactured date. The first two


10-44 Vehicle Care

digits represent the week (01–52) and the last two digits, theyear. For example, the thirdweek of the year 2010 wouldhave a four-digit DOT dateof 0310.

(4) Tire Identification Number(TIN): The letters and numbersfollowing the DOT (Departmentof Transportation) code are theTire Identification Number (TIN).The TIN shows themanufacturer and plant code,tire size, and date the tire wasmanufactured. The TIN ismolded onto both sides of thetire, although only one side mayhave the date of manufacture.

(5) Tire Ply Material: The typeof cord and number of plies inthe sidewall and under the tread.

(6) Uniform Tire QualityGrading (UTQG): Tiremanufacturers are required tograde tires based on three

performance factors: treadwear,traction, and temperatureresistance. For more informationsee Uniform Tire QualityGrading on page 10-59.

(7) Maximum Cold InflationLoad Limit: Maximum load thatcan be carried and themaximum pressure needed tosupport that load.

Compact Spare Tire Example

(1) Tire Ply Material: The typeof cord and number of plies inthe sidewall and under the tread.

(2) Temporary Use Only: Thecompact spare tire or temporaryuse tire should not be driven atspeeds over 80 km/h (50 mph).The compact spare tire is foremergency use when a regularroad tire has lost air and goneflat. If the vehicle has a compactspare tire, see Compact SpareTire on page 10-76 and If a TireGoes Flat on page 10-62.

(3) Tire Identification Number(TIN): The letters and numbersfollowing the DOT (Departmentof Transportation) code are theTire Identification Number (TIN).The TIN shows themanufacturer and plant code,tire size, and date the tire wasmanufactured. The TIN ismolded onto both sides of thetire, although only one side mayhave the date of manufacture.


Vehicle Care 10-45

(4) Maximum Cold InflationLoad Limit: Maximum load thatcan be carried and themaximum pressure needed tosupport that load.

(5) Tire Inflation: Thetemporary use tire or compactspare tire should be inflated to420 kPa (60 psi). For moreinformation on tire pressure andinflation see Tire Pressure onpage 10-48.

(6) Tire Size: A combination ofletters and numbers define atire's width, height, aspect ratio,construction type, and servicedescription. The letter T as thefirst character in the tire sizemeans the tire is for temporaryuse only.

(7) TPC Spec (TirePerformance CriteriaSpecification): Originalequipment tires designed toGM's specific tire performance

criteria have a TPC specificationcode molded onto the sidewall.GM's TPC specifications meet orexceed all federal safetyguidelines.

Tire Designations

Tire Size

The following is an example of atypical passenger vehicletire size.

(1) Passenger (P-Metric) Tire:The United States version of ametric tire sizing system. Theletter P as the first character inthe tire size means a passenger

vehicle tire engineered tostandards set by the U.S. Tireand Rim Association.

(2) Tire Width: The three-digitnumber indicates the tire sectionwidth in millimeters fromsidewall to sidewall.

(3) Aspect Ratio: A two-digitnumber that indicates the tireheight-to-width measurements.For example, if the tire sizeaspect ratio is 60, as shown initem 3 of the illustration, it wouldmean that the tire's sidewall is60 percent as high as it is wide.

(4) Construction Code: A lettercode is used to indicate the typeof ply construction in the tire.The letter R means radial plyconstruction; the letter D meansdiagonal or bias plyconstruction; and the letter Bmeans belted-bias plyconstruction.


10-46 Vehicle Care

(5) Rim Diameter: Diameter ofthe wheel in inches.

(6) Service Description: Thesecharacters represent the loadindex and speed rating of thetire. The load index representsthe load carrying capacity a tireis certified to carry. The speedrating is the maximum speed atire is certified to carry a load.

Tire Terminology andDefinitionsAir Pressure: The amount ofair inside the tire pressingoutward on each square inch ofthe tire. Air pressure isexpressed in kPa (kilopascal)or psi (pounds per square inch).

Accessory Weight: Thecombined weight of optionalaccessories. Some examples ofoptional accessories are

automatic transmission, powerwindows, power seats, and airconditioning.

Aspect Ratio: The relationshipof a tire's height to its width.

Belt: A rubber coated layer ofcords between the plies and thetread. Cords may be made fromsteel or other reinforcingmaterials.

Bead: The tire bead containssteel wires wrapped by steelcords that hold the tire ontothe rim.

Bias Ply Tire: A pneumatic tirein which the plies are laid atalternate angles less than90 degrees to the centerline ofthe tread.

Cold Tire Pressure: Theamount of air pressure in a tire,measured in kPa (kilopascal)or psi (pounds per square inch)

before a tire has built up heatfrom driving. See Tire Pressureon page 10-48.

Curb Weight: The weight of amotor vehicle with standard andoptional equipment including themaximum capacity of fuel, oil,and coolant, but withoutpassengers and cargo.

DOT Markings: A code moldedinto the sidewall of a tiresignifying that the tire is incompliance with the U.S.Department of Transportation(DOT) Motor Vehicle SafetyStandards. The DOT codeincludes the Tire IdentificationNumber (TIN), an alphanumericdesignator which can alsoidentify the tire manufacturer,production plant, brand, anddate of production.

GVWR: Gross Vehicle WeightRating. See Vehicle Load Limitson page 9-10.


Vehicle Care 10-47

GAWR FRT: Gross Axle WeightRating for the front axle. SeeVehicle Load Limits onpage 9-10.

GAWR RR: Gross Axle WeightRating for the rear axle. SeeVehicle Load Limits onpage 9-10.

Intended Outboard Sidewall:The side of an asymmetrical tirethat must always face outwardwhen mounted on a vehicle.

Kilopascal (kPa): The metricunit for air pressure.

Light Truck (LT-Metric) Tire: Atire used on light duty trucks andsome multipurpose passengervehicles.

Load Index: An assignednumber ranging from 1 to 279that corresponds to the loadcarrying capacity of a tire.

Maximum Inflation Pressure:The maximum air pressure towhich a cold tire can be inflated.The maximum air pressure ismolded onto the sidewall.

Maximum Load Rating: Theload rating for a tire at themaximum permissible inflationpressure for that tire.

Maximum Loaded VehicleWeight: The sum of curbweight, accessory weight,vehicle capacity weight, andproduction options weight.

Normal Occupant Weight: Thenumber of occupants a vehicleis designed to seat multiplied by68 kg (150 lb). See Vehicle LoadLimits on page 9-10.

Occupant Distribution:Designated seating positions.

Outward Facing Sidewall: Theside of an asymmetrical tire thathas a particular side that faces

outward when mounted on avehicle. The side of the tire thatcontains a whitewall, bearswhite lettering, or bearsmanufacturer, brand, and/ormodel name molding that ishigher or deeper than the samemoldings on the other sidewallof the tire.

Passenger (P-Metric) Tire: Atire used on passenger cars andsome light duty trucks andmultipurpose vehicles.

Recommended InflationPressure: Vehiclemanufacturer's recommendedtire inflation pressure as shownon the tire placard. See TirePressure on page 10-48 andVehicle Load Limits onpage 9-10.


10-48 Vehicle Care

Radial Ply Tire: A pneumatictire in which the ply cords thatextend to the beads are laid at90 degrees to the centerline ofthe tread.

Rim: A metal support for a tireand upon which the tire beadsare seated.

Sidewall: The portion of a tirebetween the tread and the bead.

Speed Rating: Analphanumeric code assigned toa tire indicating the maximumspeed at which a tire canoperate.

Traction: The friction betweenthe tire and the road surface.The amount of grip provided.

Tread: The portion of a tire thatcomes into contact withthe road.

Treadwear Indicators: Narrowbands, sometimes called wearbars, that show across the tread

of a tire when only 1.6 mm(1/16 in) of tread remains. SeeWhen It Is Time for New Tireson page 10-56.

UTQGS (Uniform Tire QualityGrading Standards): A tireinformation system that providesconsumers with ratings for atire's traction, temperature, andtreadwear. Ratings aredetermined by tiremanufacturers usinggovernment testing procedures.The ratings are molded into thesidewall of the tire. See UniformTire Quality Grading onpage 10-59.

Vehicle Capacity Weight: Thenumber of designated seatingpositions multiplied by68 kg (150 lb) plus the ratedcargo load. See Vehicle LoadLimits on page 9-10.

Vehicle Maximum Load on theTire: Load on an individual tiredue to curb weight, accessoryweight, occupant weight, andcargo weight.

Vehicle Placard: A labelpermanently attached to avehicle showing the vehiclecapacity weight and the originalequipment tire size andrecommended inflation pressure.See “Tire and LoadingInformation Label” under VehicleLoad Limits on page 9-10.

Tire PressureTires need the correct amount ofair pressure to operateeffectively.


Vehicle Care 10-49

{ Caution

Neither tire underinflation noroverinflation is good.Underinflated tires, or tiresthat do not have enough air,can result in:

. Tire overloading andoverheating which couldlead to a blowout.

. Premature orirregular wear.

. Poor handling.

. Reduced fuel economy.

Overinflated tires, or tires thathave too much air, canresult in:

. Unusual wear.

. Poor handling.

. Rough ride.

. Needless damage fromroad hazards.

The Tire and LoadingInformation label on the vehicleindicates the original equipmenttires and the correct cold tireinflation pressures. Therecommended pressure is theminimum air pressure needed tosupport the vehicle's maximumload carrying capacity. SeeVehicle Load Limits onpage 9-10.

How the vehicle is loadedaffects vehicle handling and ridecomfort. Never load the vehiclewith more weight than it wasdesigned to carry.

When to Check

Check the tires once a month ormore. Do not forget the compactspare, if the vehicle has one.The cold compact spare tirepressure should be at 420 kPa(60 psi). See Compact SpareTire on page 10-76.

How to Check

Use a good quality pocket-typegauge to check tire pressure.Proper tire inflation cannot bedetermined by looking at the tire.Check the tire inflation pressurewhen the tires are cold, meaningthe vehicle has not been drivenfor at least three hours or nomore than 1.6 km (1 mi).

Remove the valve cap from thetire valve stem. Press the tiregauge firmly onto the valve toget a pressure measurement.If the cold tire inflation pressurematches the recommendedpressure on the Tire andLoading Information label, nofurther adjustment is necessary.If the inflation pressure is low,add air until the recommendedpressure is reached. If theinflation pressure is high, presson the metal stem in the centerof the tire valve to release air.


10-50 Vehicle Care

Recheck the tire pressure withthe tire gauge.

Return the valve caps on thevalve stems to prevent leaksand keep out dirt and moisture.

Tire Pressure forHigh-Speed Operation

{ Warning

Driving at high speeds, 160 km/h(100mph) or higher, puts anadditional strain on tires.Sustained high-speed drivingcauses excessive heat buildupand can cause sudden tire failure.You could have a crash and youor others could be killed. Somehigh-speed rated tires requireinflation pressure adjustment forhigh-speed operation. Whenspeed limits and road conditionsare such that a vehicle can bedriven at high speeds, make sure

(Continued)

Warning (Continued)

the tires are rated for high-speedoperation, in excellent condition,and set to the correct cold tireinflation pressure for thevehicle load.

Vehicles with P245/40R19 size tiresrequire inflation pressure adjustmentwhen driving the vehicle at speedsof 160 km/h (100 mph) or higher.Set the cold inflation pressure to40 kPa (6 psi) above therecommended cold tire pressureshown on the Tire and LoadingInformation label for the P245/40R19 tire.

Return the tires to therecommended cold tire inflationpressure when high-speed drivinghas ended. See Vehicle Load Limitson page 9-10 and Tire Pressure onpage 10-48.

Tire Pressure MonitorSystemThe Tire Pressure Monitor System(TPMS) uses radio and sensortechnology to check tire pressurelevels. The TPMS sensors monitorthe air pressure in your tires andtransmit tire pressure readings to areceiver located in the vehicle.

Each tire, including the spare (ifprovided), should be checkedmonthly when cold and inflated tothe inflation pressure recommendedby the vehicle manufacturer on thevehicle placard or tire inflationpressure label. (If your vehicle hastires of a different size than the sizeindicated on the vehicle placard ortire inflation pressure label, youshould determine the proper tireinflation pressure for those tires.)

As an added safety feature, yourvehicle has been equipped with atire pressure monitoring system(TPMS) that illuminates a low tire


Vehicle Care 10-51

pressure telltale when one or moreof your tires is significantlyunder-inflated.

Accordingly, when the low tirepressure telltale illuminates, youshould stop and check your tires assoon as possible, and inflate themto the proper pressure. Driving on asignificantly under-inflated tirecauses the tire to overheat and canlead to tire failure. Under-inflationalso reduces fuel efficiency and tiretread life, and may affect thevehicle's handling and stoppingability.

Please note that the TPMS is not asubstitute for proper tiremaintenance, and it is the driver'sresponsibility to maintain correct tirepressure, even if under-inflation hasnot reached the level to triggerillumination of the TPMS low tirepressure telltale.

Your vehicle has also beenequipped with a TPMS malfunctionindicator to indicate when thesystem is not operating properly.

The TPMS malfunction indicator iscombined with the low tire pressuretelltale. When the system detects amalfunction, the telltale will flash forapproximately one minute and thenremain continuously illuminated.This sequence will continue uponsubsequent vehicle start-ups aslong as the malfunction exists.

When the malfunction indicator isilluminated, the system may not beable to detect or signal low tirepressure as intended. TPMSmalfunctions may occur for a varietyof reasons, including the installationof replacement or alternate tires orwheels on the vehicle that preventthe TPMS from functioning properly.Always check the TPMS malfunctiontelltale after replacing one or moretires or wheels on your vehicle toensure that the replacement oralternate tires and wheels allow theTPMS to continue to functionproperly.

See Tire Pressure MonitorOperation on page 10-51.


Tire Pressure MonitorOperationThis vehicle may have a TirePressure Monitor System (TPMS).The TPMS is designed to warn thedriver when a low tire pressurecondition exists. TPMS sensors aremounted onto each tire and wheelassembly, excluding the spare tireand wheel assembly. The TPMSsensors monitor the air pressure inthe tires and transmits the tirepressure readings to a receiverlocated in the vehicle.

When a low tire pressure conditionis detected, the TPMS illuminatesthe low tire pressure warning light


10-52 Vehicle Care

located on the instrument cluster.If the warning light comes on, stopas soon as possible and inflate thetires to the recommended pressureshown on the Tire and LoadingInformation label. See Vehicle LoadLimits on page 9-10.

A message to check the pressure ina specific tire displays in the DriverInformation Center (DIC). The lowtire pressure warning light and theDIC warning message come on ateach ignition cycle until the tires areinflated to the correct inflationpressure. Using the DIC, tirepressure levels can be viewed. Foradditional information and detailsabout the DIC operation anddisplays see Driver InformationCenter (DIC) (Base Level Cluster)on page 5-33 or Driver InformationCenter (DIC) (Uplevel Cluster) onpage 5-35.

The low tire pressure warning lightmay come on in cool weather whenthe vehicle is first started, and thenturn off as the vehicle is driven. Thiscould be an early indicator that the

air pressure is getting low andneeds to be inflated to the properpressure.

A Tire and Loading Informationlabel, attached to your vehicle,shows the size of the originalequipment tires and the correctinflation pressure for the tires whenthey are cold. See Vehicle LoadLimits on page 9-10, for an exampleof the Tire and Loading Informationlabel and its location. Also see TirePressure on page 10-48.

The TPMS can warn about a lowtire pressure condition but it doesnot replace normal tiremaintenance. See Tire Inspectionon page 10-55, Tire Rotation onpage 10-55 and Tires onpage 10-41.

{ Caution

Tire sealant materials are not allthe same. A non-approved tiresealant could damage the TPMS

(Continued)

Caution (Continued)

sensors. TPMS sensor damagecaused by using an incorrect tiresealant is not covered by thevehicle warranty. Always use onlythe GM approved tire sealantavailable through your dealer orincluded in the vehicle.


Vehicle Care 10-53

TPMS Malfunction Light andMessage

The TPMS will not function properlyif one or more of the TPMS sensorsare missing or inoperable. When thesystem detects a malfunction, thelow tire warning light flashes forabout one minute and then stays onfor the remainder of the ignitioncycle. A DIC warning message alsodisplays. The malfunction light andDIC warning message come on ateach ignition cycle until the problemis corrected. Some of the conditionsthat can cause these to comeon are:. One of the road tires has been

replaced with the spare tire. Thespare tire does not have aTPMS sensor. The malfunctionlight and DIC message shouldgo off after the road tire isreplaced and the sensormatching process is performedsuccessfully. See “TPMS SensorMatching Process” later in thissection.

. The TPMS sensor matchingprocess was not done or notcompleted successfully afterrotating the tires. Themalfunction light and the DICmessage should go off aftersuccessfully completing thesensor matching process. See"TPMS Sensor MatchingProcess" later in this section.

. One or more TPMS sensors aremissing or damaged. Themalfunction light and the DICmessage should go off when theTPMS sensors are installed andthe sensor matching process isperformed successfully. Seeyour dealer for service.

. Replacement tires or wheels donot match the original equipmenttires or wheels. Tires and wheelsother than those recommendedcould prevent the TPMS fromfunctioning properly. See BuyingNew Tires on page 10-57.

. Operating electronic devices orbeing near facilities using radiowave frequencies similar to theTPMS could cause the TPMSsensors to malfunction.

If the TPMS is not functioningproperly it cannot detect or signal alow tire condition. See your dealerfor service if the TPMS malfunctionlight and DIC message comes onand stays on.

TPMS Sensor MatchingProcess

Each TPMS sensor has a uniqueidentification code. The identificationcode needs to be matched to a newtire/wheel position after rotating thevehicle’s tires or replacing one ormore of the TPMS sensors. TheTPMS sensor matching processshould also be performed afterreplacing a spare tire with a roadtire containing the TPMS sensor.The malfunction light and the DICmessage should go off at the nextignition cycle. The sensors arematched to the tire/wheel positions,


10-54 Vehicle Care

using a TPMS relearn tool, in thefollowing order: driver side front tire,passenger side front tire, passengerside rear tire, and driver side rear.See your dealer for service or topurchase a relearn tool.

There are two minutes to match thefirst tire/wheel position, andfive minutes overall to match all fourtire/wheel positions. If it takeslonger, the matching process stopsand must be restarted.

The TPMS sensor matchingprocess is:

1. Set the parking brake.

2. Turn the ignition to ON/RUN withthe engine off or place thevehicle power mode in ON/RUN/START. See Ignition Positions(Key Access) on page 9-15 orIgnition Positions (KeylessAccess) on page 9-17.

3. Make sure the Tire Pressure infopage option is turned on. Theinfo pages on the DIC can beturned on and off through the

Settings menu. See DriverInformation Center (DIC) (BaseLevel Cluster) on page 5-33 orDriver Information Center (DIC)(Uplevel Cluster) on page 5-35.

4. Use the DIC controls on the rightside of the steering wheel toscroll to the Tire Pressurescreen under the DIC info page.

5. Press and hold the V (Set/Reset) button located in thecenter of the DIC controls.

The horn sounds twice to signalthe receiver is in relearn modeand the TIRE LEARNINGACTIVE message displays onthe DIC screen.

6. Start with the driver sidefront tire.

7. Place the relearn tool againstthe tire sidewall, near the valvestem. Then press the button toactivate the TPMS sensor.A horn chirp confirms that the

sensor identification code hasbeen matched to this tire andwheel position.

8. Proceed to the passenger sidefront tire, and repeat theprocedure in Step 7.

9. Proceed to the passenger siderear tire, and repeat theprocedure in Step 7.

10. Proceed to the driver side reartire, and repeat the procedurein Step 7. The horn sounds twotimes to indicate the sensoridentification code has beenmatched to the driver side reartire, and the TPMS sensormatching process is no longeractive. The TIRE LEARNINGACTIVE message on the DICdisplay screen goes off.

11. Turn the ignition to LOCK/OFFor press STOP to turn theignition off.


Vehicle Care 10-55

12. Set all four tires to therecommended air pressurelevel as indicated on the Tireand Loading Information label.

Tire InspectionWe recommend that the tires,including the spare tire, if thevehicle has one, be inspectedfor signs of wear or damage atleast once a month.

Replace the tire if:. The indicators at three or

more places around the tirecan be seen.

. There is cord or fabricshowing through the tire'srubber.

. The tread or sidewall iscracked, cut, or snaggeddeep enough to show cord orfabric.

. The tire has a bump, bulge,or split.

. The tire has a puncture, cut,or other damage that cannotbe repaired well because ofthe size or location of thedamage.

Tire RotationTires should be rotated every12 000 km (7,500 mi). SeeMaintenance Schedule onpage 11-2.

Tires are rotated to achieve auniform wear for all tires. Thefirst rotation is the mostimportant.

Anytime unusual wear isnoticed, rotate the tires as soonas possible, check for proper tireinflation pressure, and check fordamaged tires or wheels. If theunusual wear continues after the

rotation, check the wheelalignment. See When It Is Timefor New Tires on page 10-56and Wheel Replacement onpage 10-61.

Use this rotation pattern whenrotating the tires.

Do not include the compactspare tire in the tire rotation.

Adjust the front and rear tires tothe recommended inflationpressure on the Tire andLoading Information label after


10-56 Vehicle Care

the tires have been rotated. SeeTire Pressure on page 10-48and Vehicle Load Limits onpage 9-10.

Reset the Tire Pressure MonitorSystem. See Tire PressureMonitor Operation onpage 10-51.

Check that all wheel nuts areproperly tightened. See “WheelNut Torque” under Capacitiesand Specifications onpage 12-2.

{ Warning

Rust or dirt on a wheel, or on theparts to which it is fastened, canmake wheel nuts become looseafter time. The wheel could comeoff and cause an accident. Whenchanging a wheel, remove anyrust or dirt from places where thewheel attaches to the vehicle. In

(Continued)

Warning (Continued)

an emergency, a cloth or a papertowel can be used; however, usea scraper or wire brush later toremove all rust or dirt.

Lightly coat the center of thewheel hub with wheel bearinggrease after a wheel change ortire rotation to prevent corrosionor rust build-up. Do not getgrease on the flat wheelmounting surface or on thewheel nuts or bolts.

When It Is Time for NewTiresFactors such as maintenance,temperatures, driving speeds,vehicle loading, and road conditionsaffect the wear rate of the tires.

Treadwear indicators are one way totell when it is time for new tires.Treadwear indicators appear whenthe tires have only 1.6 mm (1/16 in)or less of tread remaining. See TireInspection on page 10-55 and TireRotation on page 10-55.

The rubber in tires ages over time.This also applies to the spare tire,if the vehicle has one, even if it isnever used. Multiple factorsincluding temperatures, loadingconditions, and inflation pressuremaintenance affect how fast agingtakes place. GM recommends thattires, including the spare if


Vehicle Care 10-57

equipped, be replaced after sixyears, regardless of tread wear. Thetire manufacture date is the last fourdigits of the DOT Tire IdentificationNumber (TIN) which is molded intoone side of the tire sidewall. Thefirst two digits represent the week(01–52) and the last two digits, theyear. For example, the third week ofthe year 2010 would have afour-digit DOT date of 0310.

Vehicle Storage

Tires age when stored normallymounted on a parked vehicle. Parka vehicle that will be stored for atleast a month in a cool, dry, cleanarea away from direct sunlight toslow aging. This area should be freeof grease, gasoline, or othersubstances that can deterioraterubber.

Parking for an extended period cancause flat spots on the tires thatmay result in vibrations whiledriving. When storing a vehicle for

at least a month, remove the tires orraise the vehicle to reduce theweight from the tires.

Buying New TiresGM has developed and matchedspecific tires for the vehicle. Theoriginal equipment tires installedwere designed to meet GeneralMotors Tire Performance CriteriaSpecification (TPC Spec)system rating. Whenreplacement tires are needed,GM strongly recommendsbuying tires with the same TPCSpec rating.

GM's exclusive TPC Specsystem considers over a dozencritical specifications that impactthe overall performance of thevehicle, including brake systemperformance, ride and handling,traction control, and tirepressure monitoringperformance. GM's TPC Spec

number is molded onto the tire'ssidewall near the tire size. If thetires have an all-season treaddesign, the TPC Spec numberwill be followed by MS for mudand snow. See Tire SidewallLabeling on page 10-43.

GM recommends replacing worntires in complete sets of four.Uniform tread depth on all tireswill help to maintain theperformance of the vehicle.Braking and handlingperformance may be adverselyaffected if all the tires are notreplaced at the same time.If proper rotation andmaintenance have been done,all four tires should wear out atabout the same time. See TireRotation on page 10-55.However, if it is necessary toreplace only one axle set ofworn tires, place the new tireson the rear axle.


10-58 Vehicle Care

Winter tires with the same speedrating as the original equipmenttires may not be available for H,V, W, Y and ZR speed ratedtires. Never exceed the wintertires’ maximum speed capabilitywhen using winter tires with alower speed rating.

{ Warning

Tires could explode duringimproper service. Attemptingto mount or dismount a tirecould cause injury or death.Only your dealer or authorizedtire service center shouldmount or dismount the tires.

{ Warning

Mixing tires of different sizes,brands, or types may causeloss of control of the vehicle,resulting in a crash or othervehicle damage. Use thecorrect size, brand, and typeof tires on all wheels.

{ Warning

Using bias-ply tires on thevehicle may cause the wheelrim flanges to develop cracksafter many miles of driving.A tire and/or wheel could failsuddenly and cause a crash.Use only radial-ply tires withthe wheels on the vehicle.

If the vehicle tires must bereplaced with a tire that does nothave a TPC Spec number, make

sure they are the same size,load range, speed rating, andconstruction (radial) as theoriginal tires.

Vehicles that have a tirepressure monitoring systemcould give an inaccuratelow-pressure warning if non-TPCSpec rated tires are installed.See Tire Pressure MonitorSystem on page 10-50.

The Tire and LoadingInformation label indicates theoriginal equipment tires on thevehicle. See Vehicle Load Limitson page 9-10.

Different Size Tires andWheelsIf wheels or tires are installed thatare a different size than the originalequipment wheels and tires, vehicleperformance, including its braking,ride and handling characteristics,stability, and resistance to rollover


Vehicle Care 10-59

may be affected. If the vehicle haselectronic systems such as antilockbrakes, rollover airbags, tractioncontrol, electronic stability control,or All-Wheel Drive, the performanceof these systems can also beaffected.

{ Warning

If different sized wheels are used,there may not be an acceptablelevel of performance and safety iftires not recommended for thosewheels are selected. Thisincreases the chance of a crashand serious injury. Only use GMspecific wheel and tire systemsdeveloped for the vehicle, andhave them properly installed by aGM certified technician.

See Buying New Tires onpage 10-57 and Accessories andModifications on page 10-3.

Uniform Tire QualityGradingQuality grades can be foundwhere applicable on the tiresidewall between tread shoulderand maximum section width. Forexample:

Treadwear 200 Traction AATemperature A

The following information relatesto the system developed by theUnited States National HighwayTraffic Safety Administration(NHTSA), which grades tires bytreadwear, traction, andtemperature performance. Thisapplies only to vehicles sold inthe United States. The gradesare molded on the sidewalls ofmost passenger car tires. TheUniform Tire Quality Grading(UTQG) system does not applyto deep tread, winter tires,compact spare tires, tires with

nominal rim diameters of10 to 12 inches (25 to 30 cm),or to some limited-productiontires.

While the tires available onGeneral Motors passenger carsand light trucks may vary withrespect to these grades, theymust also conform to federalsafety requirements andadditional General Motors TirePerformance Criteria (TPC)standards.

All Passenger Car Tires MustConform to Federal SafetyRequirements In Addition ToThese Grades.

Treadwear

The treadwear grade is acomparative rating based on thewear rate of the tire when testedunder controlled conditions on aspecified government testcourse. For example, a tire


10-60 Vehicle Care

graded 150 would wear one andone-half (1½) times as well onthe government course as a tiregraded 100. The relativeperformance of tires dependsupon the actual conditions oftheir use, however, and maydepart significantly from thenorm due to variations in drivinghabits, service practices anddifferences in roadcharacteristics and climate.

Traction

The traction grades, fromhighest to lowest, are AA, A, B,and C. Those grades representthe tire's ability to stop on wetpavement as measured undercontrolled conditions onspecified government testsurfaces of asphalt andconcrete. A tire marked C mayhave poor traction performance.Warning: The traction gradeassigned to this tire is based on

straight-ahead braking tractiontests, and does not includeacceleration, cornering,hydroplaning, or peak tractioncharacteristics.

Temperature

The temperature grades are A(the highest), B, and C,representing the tire's resistanceto the generation of heat and itsability to dissipate heat whentested under controlledconditions on a specified indoorlaboratory test wheel. Sustainedhigh temperature can cause thematerial of the tire to degenerateand reduce tire life, andexcessive temperature can leadto sudden tire failure. The gradeC corresponds to a level ofperformance which allpassenger car tires must meetunder the Federal Motor SafetyStandard No. 109. Grades B andA represent higher levels of

performance on the laboratorytest wheel than the minimumrequired by law. Warning: Thetemperature grade for this tire isestablished for a tire that isproperly inflated and notoverloaded. Excessive speed,underinflation, or excessiveloading, either separately or incombination, can cause heatbuildup and possible tire failure.

Wheel Alignment and TireBalanceThe tires and wheels were alignedand balanced at the factory toprovide the longest tire life and bestoverall performance. Adjustments towheel alignment and tire balancingare not necessary on a regularbasis. Consider an alignment checkif there is unusual tire wear or thevehicle is significantly pulling to oneside or the other. Some slight pull tothe left or right, depending on thecrown of the road and/or other road


Vehicle Care 10-61

surface variations such as troughsor ruts, is normal. If the vehicle isvibrating when driving on a smoothroad, the tires and wheels may needto be rebalanced. See your dealerfor proper diagnosis.

Wheel ReplacementReplace any wheel that is bent,cracked, or badly rusted orcorroded. If wheel nuts keep comingloose, the wheel, wheel bolts, andwheel nuts should be replaced.If the wheel leaks air, replace it.Some aluminum wheels can berepaired. See your dealer if any ofthese conditions exist.

Your dealer will know the kind ofwheel that is needed.

Each new wheel should have thesame load-carrying capacity,diameter, width, offset, and bemounted the same way as the one itreplaces.

Replace wheels, wheel bolts, wheelnuts, or Tire Pressure MonitorSystem (TPMS) sensors with newGM original equipment parts.

{ Warning

Using the wrong replacementwheels, wheel bolts, or wheelnuts can be dangerous. It couldaffect the braking and handling ofthe vehicle. Tires can lose air,and cause loss of control, causinga crash. Always use the correctwheel, wheel bolts, and wheelnuts for replacement.

{ Caution

The wrong wheel can also causeproblems with bearing life, brakecooling, speedometer orodometer calibration, headlampaim, bumper height, vehicle

(Continued)

Caution (Continued)

ground clearance, and tire or tirechain clearance to the body andchassis.

Used Replacement Wheels

{ Warning

Replacing a wheel with a usedone is dangerous. How it hasbeen used or how far it has beendriven may be unknown. It couldfail suddenly and cause a crash.When replacing wheels, use anew GM original equipmentwheel.


10-62 Vehicle Care

Tire Chains

{ Warning

Do not use tire chains. There isnot enough clearance. Tire chainsused on a vehicle without theproper amount of clearance cancause damage to the brakes,suspension, or other vehicleparts. The area damaged by thetire chains could cause loss ofcontrol and a crash.

Use another type of tractiondevice only if its manufacturerrecommends it for the vehicle'stire size combination and roadconditions. Follow thatmanufacturer's instructions. Toavoid vehicle damage, drive slowand readjust or remove thetraction device if it contacts thevehicle. Do not spin the wheels.If traction devices are used, installthem on the front tires.

If a Tire Goes FlatIt is unusual for a tire to blow outwhile driving, especially if the tiresare maintained properly. See Tireson page 10-41. If air goes out of atire, it is much more likely to leakout slowly. But if there is ever ablowout, here are a few tips aboutwhat to expect and what to do:

If a front tire fails, the flat tirecreates a drag that pulls the vehicletoward that side. Take your foot offthe accelerator pedal and grip thesteering wheel firmly. Steer tomaintain lane position, and thengently brake to a stop, well off theroad, if possible.

A rear blowout, particularly on acurve, acts much like a skid andmay require the same correction asused in a skid. Stop pressing theaccelerator pedal and steer tostraighten the vehicle. It may bevery bumpy and noisy. Gently braketo a stop, well off the road,if possible.

{ Warning

Driving on a flat tire will causepermanent damage to the tire.Re-inflating a tire after it has beendriven on while severelyunderinflated or flat may cause ablowout and a serious crash.Never attempt to re-inflate a tirethat has been driven on whileseverely underinflated or flat.Have your dealer or an authorizedtire service center repair orreplace the flat tire as soon aspossible.

{ Warning

Lifting a vehicle and getting underit to do maintenance or repairs isdangerous without theappropriate safety equipment andtraining. If a jack is provided withthe vehicle, it is designed only for

(Continued)


Vehicle Care 10-63

Warning (Continued)

changing a flat tire. If it is used foranything else, you or others couldbe badly injured or killed if thevehicle slips off the jack. If a jackis provided with the vehicle, onlyuse it for changing a flat tire.

If a tire goes flat, avoid further tireand wheel damage by driving slowlyto a level place, well off the road,if possible. Turn on the hazardwarning flashers. See HazardWarning Flashers on page 6-3.

{ Warning

Changing a tire can bedangerous. The vehicle can slipoff the jack and roll over or fallcausing injury or death. Find alevel place to change the tire. Tohelp prevent the vehicle frommoving:

(Continued)

Warning (Continued)

1. Set the parking brake firmly.

2. Put an automatictransmission in P (Park) or amanual transmission in1 (First) or R (Reverse).

3. Turn off the engine and donot restart while the vehicleis raised.

4. Do not allow passengers toremain in the vehicle.

5. Place wheel blocks on bothsides of the tire at theopposite corner of the tirebeing changed.

This vehicle may come with a jackand spare tire or a tire sealant andcompressor kit. To use the jackingequipment to change a spare tiresafely, follow the instructions below.Then see Tire Changing onpage 10-71. To use the tire sealant

and compressor kit, see TireSealant and Compressor Kit onpage 10-64.

When the vehicle has a flat tire (2),use the following example as aguide to assist you in the placementof wheel blocks (1).

1. Wheel Block2. Flat Tire

The following information explainshow to repair or change a tire.


10-64 Vehicle Care

Tire Sealant andCompressor Kit

{ Warning

Idling a vehicle in an enclosedarea with poor ventilation isdangerous. Engine exhaust mayenter the vehicle. Engine exhaustcontains carbon monoxide (CO)which cannot be seen or smelled.It can cause unconsciousnessand even death. Never run theengine in an enclosed area thathas no fresh air ventilation. Formore information, see EngineExhaust on page 9-26.

{ Warning

Overinflating a tire could causethe tire to rupture and you orothers could be injured. Be sureto read and follow the tire sealant

(Continued)

Warning (Continued)

and compressor kit instructionsand inflate the tire to itsrecommended pressure. Do notexceed the recommendedpressure.

{ Warning

Storing the tire sealant andcompressor kit or otherequipment in the passengercompartment of the vehicle couldcause injury. In a sudden stop orcollision, loose equipment couldstrike someone. Store the tiresealant and compressor kit in itsoriginal location.

If this vehicle has a tire sealant andcompressor kit, there may not be aspare tire and tire changing

equipment, and on some vehiclesthere may not be a place to storea tire.

The tire sealant and compressorcan be used to temporarily sealpunctures up to 6 mm (0.25 in) inthe tread area of the tire. It can alsobe used to inflate anunderinflated tire.

If the tire has been separated fromthe wheel, has damaged sidewalls,or has a large puncture, the tire istoo severely damaged for the tiresealant and compressor kit to beeffective. See Roadside AssistanceProgram on page 13-5.

Read and follow all of the tiresealant and compressor kitinstructions.


Vehicle Care 10-65

The kit includes: 1. Selector Switch (Sealant/Airor Air Only)

2. On/Off Button3. Pressure Gauge4. Pressure Deflation Button

(If equipped)5. Tire Sealant Canister6. Sealant/Air Hose (Clear)7. Air Only Hose (Black)8. Power Plug9. Canister Release Button

(Under Sealant/Air Hose)

Tire Sealant

Read and follow the safe handlinginstructions on the label adhered tothe sealant canister.

Check the tire sealant expirationdate on the sealant canister. Thesealant canister should be replacedbefore its expiration date.Replacement sealant canisters areavailable at your local dealer. See“Removal and Installation of theSealant Canister” following.

There is only enough sealant to sealone tire. After usage, the sealantcanister and sealant/air hoseassembly must be replaced. See“Removal and Installation of theSealant Canister” following.

Using the Tire Sealant andCompressor Kit to TemporarilySeal and Inflate aPunctured Tire

Follow the directions closely forcorrect sealant usage.


10-66 Vehicle Care

When using the tire sealant andcompressor kit during coldtemperatures, warm the kit in a

heated environment for five minutes.This will help to inflate the tirefaster.

If a tire goes flat, avoid further tireand wheel damage by driving slowlyto a level place. Turn on the hazardwarning flashers. See HazardWarning Flashers on page 6-3.

See If a Tire Goes Flat onpage 10-62 for other importantsafety warnings.

Do not remove any objects thathave penetrated the tire.

1. Remove the tire sealant andcompressor kit from its storagelocation. See Storing the TireSealant and Compressor Kit onpage 10-71.

2. Unwrap the sealant/air hose (6)and the power plug (8).

3. Place the kit on the ground.

Make sure the tire valve stem ispositioned close to the groundso the hose will reach it.

4. Remove the valve stem cap fromthe flat tire by turning itcounterclockwise.

5. Attach the sealant/air hose (6)onto the tire valve stem. Turn itclockwise until it is tight.

6. Plug the power plug (8) into theaccessory power outlet in thevehicle. Unplug all items fromother accessory power outlets.See Power Outlets on page 5-5.

If the vehicle has an accessorypower outlet, do not use thecigarette lighter.

If the vehicle only has a cigarettelighter, use the cigarette lighter.

Do not pinch the power plugcord in the door or window.

7. Start the vehicle. The vehiclemust be running while using theair compressor.

8. Press and turn the selectorswitch (1) counterclockwise tothe Sealant + Air position.


Vehicle Care 10-67

9. Press the on/off button (2) toturn the tire sealant andcompressor kit on.

The compressor will injectsealant and air into the tire.

The pressure gauge (3) willinitially show a high pressurewhile the compressor pushes thesealant into the tire. Once thesealant is completely dispersedinto the tire, the pressure willquickly drop and start to riseagain as the tire inflates withair only.

10. Inflate the tire to therecommended inflationpressure using the pressuregauge (3). The recommendedinflation pressure can be foundon the Tire and LoadingInformation label. See TirePressure on page 10-48.

The pressure gauge (3) mayread higher than the actual tirepressure while the compressoris on. Turn the compressor offto get an accurate pressure

reading. The compressor maybe turned on/off until thecorrect pressure is reached.

{ Caution

If the recommended pressurecannot be reached afterapproximately 25 minutes, thevehicle should not be drivenfarther. The tire is too severelydamaged and the tire sealant andcompressor kit cannot inflate thetire. Remove the power plug fromthe accessory power outlet andunscrew the inflating hose fromthe tire valve. See RoadsideAssistance Program onpage 13-5.

11. Press the on/off button (2) toturn the tire sealant andcompressor kit off.

The tire is not sealed and willcontinue to leak air until thevehicle is driven and thesealant is distributed in the tire;therefore, Steps 12–18 must bedone immediately afterStep 11.

Be careful while handling thetire sealant and compressor kitas it could be warm afterusage.

12. Unplug the power plug (8) fromthe accessory power outlet inthe vehicle.

13. Turn the sealant/air hose (6)counterclockwise to remove itfrom the tire valve stem.

14. Replace the tire valvestem cap.

15. Replace the sealant/air hose(6), and the power plug (8)back in their original location.


10-68 Vehicle Care

16. If the flat tire was able to inflateto the recommended inflationpressure, remove themaximum speed label from thetire sealant canister (5) andplace it in a highly visiblelocation. Do not exceed thespeed on this label until thedamaged tire is repaired orreplaced.

17. Return the equipment to itsoriginal storage location in thevehicle.

18. Immediately drive the vehicle8 km (5 mi) to distribute thesealant in the tire.

19. Stop at a safe location andcheck the tire pressure. Referto Steps 1–11 under “Using theTire Sealant and CompressorKit without Sealant to Inflate aTire (Not Punctured).”

If the tire pressure has fallenmore than 68 kPa (10 psi)below the recommendedinflation pressure, stop drivingthe vehicle. The tire is tooseverely damaged and the tiresealant cannot seal the tire.See Roadside AssistanceProgram on page 13-5.

If the tire pressure has notdropped more than 68 kPa(10 psi) from the recommendedinflation pressure, inflate thetire to the recommendedinflation pressure.

20. Wipe off any sealant from thewheel, tire, and vehicle.

21. Dispose of the used tiresealant canister (5) andsealant/air hose (6) assembly

at a local dealer or inaccordance with local statecodes and practices.

22. Replace it with a new canisteravailable from your dealer.

23. After temporarily sealing a tireusing the tire sealant andcompressor kit, take thevehicle to an authorized dealerwithin a 161 km (100 mi) ofdriving to have the tire repairedor replaced.


Vehicle Care 10-69

Using the Tire Sealant andCompressor Kit withoutSealant to Inflate a Tire (NotPunctured)

To use the air compressor to inflatea tire with air only and not sealant:

If a tire goes flat, avoid further tireand wheel damage by driving slowlyto a level place. Turn on the hazardwarning flashers. See HazardWarning Flashers on page 6-3.

See If a Tire Goes Flat onpage 10-62 for other importantsafety warnings.

1. Remove the tire sealant andcompressor kit from its storagelocation. See Storing the TireSealant and Compressor Kit onpage 10-71.

2. Unwrap the air only hose (7) andthe power plug (8).

3. Place the kit on the ground.

Make sure the tire valve stem ispositioned close to the groundso the hose will reach it.

4. Remove the tire valve stem capfrom the flat tire by turning itcounterclockwise.

5. Attach the air only hose (7) ontothe tire valve stem by turning itclockwise until it is tight.


10-70 Vehicle Care

6. Plug the power plug (8) into theaccessory power outlet in thevehicle. Unplug all items fromother accessory power outlets.See Power Outlets on page 5-5.

If the vehicle has an accessorypower outlet, do not use thecigarette lighter.

If the vehicle only has a cigarettelighter, use the cigarette lighter.

Do not pinch the power plugcord in the door or window.

7. Start the vehicle. The vehiclemust be running while using theair compressor.

8. Press and turn the selectorswitch (1) clockwise to the AirOnly position.

9. Press the on/off button (2) toturn the compressor on.

The compressor will inflate thetire with air only.

10. Inflate the tire to therecommended inflationpressure using the pressuregauge (3). The recommendedinflation pressure can be foundon the Tire and LoadingInformation label. See TirePressure on page 10-48.

The pressure gauge (3) mayread higher than the actual tirepressure while the compressoris on. Turn the compressor offto get an accurate reading. Thecompressor may be turned on/off until the correct pressure isreached.

If you inflate the tire higherthan the recommendedpressure you can adjust theexcess pressure by pressingthe pressure deflationbutton (4), if equipped, until theproper pressure reading isreached. This option is onlyfunctional when using the aironly hose (7).

11. Press the on/off button (2) toturn the tire sealant andcompressor kit off.

Be careful while handling thetire sealant and compressor kitas it could be warm afterusage.

12. Unplug the power plug (8) fromthe accessory power outlet inthe vehicle.

13. Disconnect the air only hose(7) from the tire valve stem byturning it counterclockwise, andreplace the tire valve stem cap.

14. Replace the air only hose (7)and the power plug (8) andcord back in their originallocations.

15. Place the equipment in theoriginal storage location in thevehicle.


Vehicle Care 10-71

The tire sealant and compressor kithas an accessory adapter in acompartment on the bottom of itshousing that may be used to inflateair mattresses, balls, etc.

Removal and Installation of theSealant Canister

To remove the sealant canister:

1. Unwrap the sealant hose.

2. Press the canister releasebutton (9).

3. Pull up and remove the canister.

4. Replace with a new canisterwhich is available from yourdealer.

5. Push the new canister intoplace.

Storing the Tire Sealantand Compressor KitTo access the tire sealant andcompressor kit:

1. Open the trunk. See Trunk onpage 2-14.

2. Lift the cover.

3. Turn the wing nutcounterclockwise to remove it.

4. Remove the tire sealant andcompressor kit.

To store the tire sealant andcompressor kit, reverse the steps.

Tire Changing

Removing the Spare Tire andTools

1. Screwdriver2. Tow Hook (If Equipped)3. Jack


10-72 Vehicle Care

4. Wrench (In Bag)5. Trim Removal (If Equipped)6. Fastener (If Equipped)

To access the spare tire and tools:

1. Open the trunk.

2. Remove the spare tire cover.

3. Turn the retainer nutcounterclockwise and removethe spare tire. Place the sparetire next to the tire beingchanged.

4. The jack and tools are storedbelow the spare tire. Removethem from their container andplace them near the tire beingchanged.

Removing the Flat Tire andInstalling the Spare Tire

Take off the wheel cover or centercap, if the vehicle has one, to reachthe wheel bolts.

1. Do a safety check beforeproceeding. See If a Tire GoesFlat on page 10-62.

2. Turn the wheel wrenchcounterclockwise to loosen andremove the wheel nut caps.

Do not try to remove plastic capsfrom the cover or center cap.

3. Pull the cover or center capaway from the wheel. Store thewheel cover in the cargo areauntil you have the flat tirerepaired or replaced.

4. Turn the wheel wrenchcounterclockwise to loosen allthe wheel nuts, but do notremove them yet.


Vehicle Care 10-73

5. Place the jack near the flat tire.

6. Put the compact spare tirenear you.

{ Warning

Getting under a vehicle when it islifted on a jack is dangerous.If the vehicle slips off the jack,you could be badly injured orkilled. Never get under a vehiclewhen it is supported only bya jack.

{ Warning

Raising the vehicle with the jackimproperly positioned candamage the vehicle and evenmake the vehicle fall. To helpavoid personal injury and vehicledamage, be sure to fit the jack lifthead into the proper locationbefore raising the vehicle.

{ Warning

Lifting a vehicle and getting underit to do maintenance or repairs isdangerous without theappropriate safety equipment andtraining. If a jack is provided withthe vehicle, it is designed only forchanging a flat tire. If it is used foranything else, you or others couldbe badly injured or killed if thevehicle slips off the jack. If a jackis provided with the vehicle, onlyuse it for changing a flat tire.

7. Attach the jack lift assist tool tothe jack by fitting both ends ofthe jack and tool over oneanother.

8. Place the jack under the vehicle.

{ Caution

Make sure that the jack lift headis in the correct position or youmay damage your vehicle. Therepairs would not be covered byyour warranty.

9. Position the jack lift head at thejack location nearest the flat tire.The location is indicated by amark near the bottom edge of


10-74 Vehicle Care

the lower molding. The jackmust not be used in any otherposition.

10. Raise the vehicle by turning thejack handle clockwise. Raisethe vehicle far enough off theground so there is enoughroom for the road tire to clearthe ground.

11. Remove all of the wheel nuts.

12. Remove the flat tire.

{ Warning

Rust or dirt on a wheel, or on theparts to which it is fastened, canmake wheel nuts become looseafter time. The wheel could comeoff and cause an accident. Whenchanging a wheel, remove anyrust or dirt from places where thewheel attaches to the vehicle. In

(Continued)

Warning (Continued)

an emergency, a cloth or a papertowel can be used; however, usea scraper or wire brush later toremove all rust or dirt.

13. Remove any rust or dirt fromthe wheel bolts, mountingsurfaces, and spare wheel.

14. Place the compact spare tireon the wheel-mounting surface.


Vehicle Care 10-75

{ Warning

Never use oil or grease on boltsor nuts because the nuts mightcome loose. The vehicle's wheelcould fall off, causing a crash.

15. Reinstall the wheel nuts.Tighten each nut by hand untilthe wheel is held againstthe hub.

16. Lower the vehicle by turningthe jack handlecounterclockwise.

{ Warning

Wheel nuts that are improperly orincorrectly tightened can causethe wheels to become loose orcome off. The wheel nuts shouldbe tightened with a torque wrenchto the proper torque specificationafter replacing. Follow the torquespecification supplied by the

(Continued)

Warning (Continued)

aftermarket manufacturer whenusing accessory locking wheelnuts. See Capacities andSpecifications on page 12-2 fororiginal equipment wheel nuttorque specifications.

{ Caution

Improperly tightened wheel nutscan lead to brake pulsation androtor damage. To avoid expensivebrake repairs, evenly tighten thewheel nuts in the propersequence and to the propertorque specification. SeeCapacities and Specifications forthe wheel nut torque specification.

17. Tighten the wheel nuts firmly ina crisscross sequence, asshown.

18. Lower the jack all the way andremove the jack from under thevehicle.

19. Tighten the wheel nuts firmlywith the wheel wrench.

When reinstalling the wheel cover orcenter cap on the full-size tire,tighten all five plastic caps handsnug, then tighten them with thewheel wrench an additionalone-quarter turn.


10-76 Vehicle Care

{ Caution

Wheel covers will not fit on thevehicle's compact spare. If you tryto put a wheel cover on thecompact spare, the cover or thespare could be damaged.

Storing a Flat or Spare Tireand Tools

{ Warning

Storing a jack, a tire, or otherequipment in the passengercompartment of the vehicle couldcause injury. In a sudden stop orcollision, loose equipment couldstrike someone. Store all these inthe proper place.

1. Turn the wrenchcounterclockwise to remove thefastener.

2. Replace the fastener with theone provided in the foam.

3. Turn the wrench clockwise totighten the fastener.

4. Replace the foam, jack andtools, and the tire.

5. Turn the retainer nut clockwiseto secure the tire.

6. Place the floor cover on thewheel.

To store the compact spare tire, usethe shorter mounting bolt.

The compact spare is for temporaryuse only. Replace the compactspare tire with a full-size tire assoon as you can.

Compact Spare Tire

{ Warning

Driving with more than onecompact spare tire at a time couldresult in loss of braking andhandling. This could lead to acrash and you or others could beinjured. Use only one compactspare tire at a time.

If this vehicle has a compact sparetire, it was fully inflated when new;however, it can lose air over time.Check the inflation pressureregularly. It should be 420 kPa(60 psi).


Vehicle Care 10-77

Stop as soon as possible and checkthat the spare tire is correctlyinflated after being installed on thevehicle. The compact spare tire isdesigned for temporary use only.The vehicle will perform differentlywith the spare tire installed and it isrecommended that the vehiclespeed be limited to 80 km/h(50 mph). To conserve the tread ofthe spare tire, have the standard tirerepaired or replaced as soon asconvenient and return the spare tireto the storage area.

When using a compact spare tire,the ABS and Traction Controlsystems may engage until the sparetire is recognized by the vehicle,especially on slippery roads. Adjustdriving to reduce possiblewheel slip.

{ Caution

When the compact spare isinstalled, do not take the vehiclethrough an automatic car washwith guide rails. The compactspare can get caught on the railswhich can damage the tire, wheel,and other parts of the vehicle.

Do not use the compact spare onother vehicles.

Do not mix the compact spare tire orwheel with other wheels or tires.They will not fit. Keep the spare tireand its wheel together.

{ Caution

Tire chains will not fit the compactspare. Using them can damagethe vehicle and the chains. Do notuse tire chains on the compactspare.

Jump Starting

Jump Starting (On-boardwith eAssist Only)If the vehicle fails to crank, it maybe jump started by using the eAssistbattery to charge the 12-volt battery.Use the following procedure toactivate the on-board jump startusing the DIC controls.


10-78 Vehicle Care

DIC Buttons

The vehicle may be equipped withan ignition key or an electronickeyless ignition with pushbuttonstart.

Key Access

Place the ignition key in the ON/RUN position and proceed asfollows:

1. Press S then scrolly orzuntil the Settings menu displays.

2. Press V to enter theSettings menu.

3. Press T then scrolly orzuntil Jump Start displays.

4. Press V to activate the jumpstart.

5. The system will then ask forconfirmation. If Yes is selected,the jump start will begin and thedisplay will show WAIT TOSTART.

6. When the jump start is complete,the display will show ATTEMPTSTART or JUMP STARTDISABLED.

Keyless Access

With the brake pedal not applied,press and hold the ENGINE START/STOP button for more thanfive seconds. This will place thevehicle in the Service Only Mode.Proceed as follows:

1. Press S then scrolly orzuntil the Settings menu displays.

2. Press V to enter theSettings menu.

3. Press T then scrolly orzuntil Jump Start displays.

4. Press V to activate the jumpstart.

5. The system will then ask forconfirmation. If Yes is selected,the jump start will begin and thedisplay will show WAIT TOSTART.

6. When the jump start is complete,the display will show ATTEMPTSTART or JUMP STARTDISABLED.

If the vehicle is started, theon-board jump start function will beautomatically disabled. If the vehiclecranks but does not start, theprocedure may be repeated again.If the vehicle start is stillunsuccessful, the jump start can beattempted using the following jumpstarting procedure under “JumpStarting (with or without eAssist).”On-board jump starting may beunavailable due to the 12-voltbattery charge level, the eAssist


Vehicle Care 10-79

battery charge level, powercapability, or an issue with theeAssist system. In these cases, thedisplay will not be available becauseof the power issue, or the DIC willdisplay JUMP START DISABLEDSEE OWNERS MANUAL.

Jump Starting (with orwithout eAssist)For more information about thevehicle battery, see Battery onpage 10-27.

If the battery has run down, try touse another vehicle and somejumper cables to start the vehicle.Be sure to use the following steps todo it safely.

{ Warning

Batteries can hurt you. They canbe dangerous because:

. They contain acid that canburn you.

(Continued)

Warning (Continued)

. They contain gas that canexplode or ignite.

. They contain enoughelectricity to burn you.

If you do not follow these stepsexactly, some or all of thesethings can hurt you.

{ Caution

Ignoring these steps could resultin costly damage to the vehiclethat would not be covered by thevehicle warranty. Trying to startthe vehicle by pushing or pulling itwill not work, and it could damagethe vehicle.

The vehicle has a battery coverwhich must be removed to gainaccess to the battery for jumpstarting.

1. Clips

2. Pivot Points

To remove the battery cover:

1. Release the two rear clips (1).

2. Lift the battery cover up towardsthe front of the vehicle to releaseit from the pivot points (2) andremove.

3. Reverse Steps 1–2 to reinstallthe battery cover.


10-80 Vehicle Care

The vehicle has a remotepositive (+) terminal under a trimcover. It is under the battery coveron the driver side of the enginecompartment. See EngineCompartment Overview onpage 10-6. You should always usethis remote positive (+) terminal.

The jump start negative groundingpoint for the discharged battery isthe engine block or an enginemounting bolt. Connect to a spot asfar away from the dischargedbattery as possible.

1. Check the other vehicle. It musthave a 12-volt battery with anegative ground system.

{ Caution

If the other vehicle does not havea 12-volt system with a negativeground, both vehicles can bedamaged. Only use a vehicle thathas a 12-volt system with anegative ground for jump starting.

2. Position the two vehicles so thatthey are not touching.

To avoid the possibility of thevehicles rolling, set the parkingbrake firmly on both vehiclesinvolved in the jump startprocedure. Put an automatictransmission in P (Park) or amanual transmission in Neutralbefore setting the parking brake.

3. Set the parking brake firmly onboth vehicles. Put an automatictransmission in P (Park) or amanual transmission in Neutralbefore setting the parking brake.

{ Caution

If any accessories are left on orplugged in during the jumpstarting procedure, they could bedamaged. The repairs would notbe covered by the vehiclewarranty. Whenever possible, turnoff or unplug all accessories oneither vehicle when jump starting.

4. Turn the ignition to LOCK/OFFand switch off all lights andaccessories in both vehicles,except the hazard warningflashers if needed.


Vehicle Care 10-81

{ Warning

An electric fan can start up evenwhen the engine is not runningand can injure you. Keep hands,clothing and tools away from anyunderhood electric fan.

{ Warning

Using a match near a battery cancause battery gas to explode.People have been hurt doing this,and some have been blinded.Use a flashlight if you need morelight.

Be sure the battery has enoughwater. You do not need to addwater to the battery installed inyour new vehicle. But if a batteryhas filler caps, be sure the rightamount of fluid is there. If it is low,

(Continued)

Warning (Continued)

add water to take care of thatfirst. If you do not, explosive gascould be present.

Battery fluid contains acid thatcan burn you. Do not get it onyou. If you accidentally get it inyour eyes or on your skin, flushthe place with water and getmedical help immediately.

{ Warning

Fans or other moving engineparts can injure you badly. Keepyour hands away from movingparts once the engine is running.

6. Connect the red positive (+)cable to the remote positive (+)terminal of the dischargedbattery.

7. Connect the other end of thepositive (+) cable to thepositive (+) terminal of the goodbattery. Use a remotepositive (+) terminal if thevehicle has one.

8. Connect one end of the blacknegative (−) cable to thenegative (−) terminal of the goodbattery.

9. Connect the other end of thenegative (−) to the negative (–)grounding point for thedischarged battery.

10. Start the vehicle with the goodbattery and run the engine atidle speed for at leastfour minutes.

11. Try to start the vehicle that hadthe dead battery. If it will notstart after a few tries, itprobably needs service.


10-82 Vehicle Care

{ Caution

If the jumper cables areconnected or removed in thewrong order, electrical shortingmay occur and damage thevehicle. The repairs would not becovered by the vehicle warranty.Always connect and remove thejumper cables in the correct order,making sure that the cables donot touch each other or othermetal.

Jumper Cable Removal

Reverse the sequence exactly whenremoving the jumper cables.

Towing

Towing the Vehicle

{ Caution

Incorrectly towing a disabledvehicle may cause damage. Thedamage would not be covered bythe vehicle warranty. Do not lashor hook to the chassiscomponents — including the frontand rear subframes, suspensioncontrol arms, and links — duringtowing and recovery of a disabledvehicle, or when securing thevehicle. Use the proper nylonstrap harnesses around the tiresto secure the vehicle.

Have the vehicle towed on a wheellift tow truck. A flatbed car carriercould damage the vehicle. Thewheel lift tow truck must raise therear of the vehicle and wheel dolliesmust be used to lift the front wheelsoff the ground.

Consult your dealer or aprofessional towing service if thedisabled vehicle must be towed.

To tow the vehicle behind anothervehicle for recreational purposes,such as behind a motor home, see“Recreational Vehicle Towing”following.

Recreational VehicleTowingRecreational vehicle towing meanstowing the vehicle behind anothervehicle, such as behind a motorhome. The two most common typesof recreational vehicle towing areknown as dinghy towing and dollytowing. Dinghy towing is towing thevehicle with all four wheels on theground. Dolly towing is towing thevehicle with two wheels on theground and two wheels up on adevice known as a dolly.


Vehicle Care 10-83

Here are some important things toconsider before recreational vehicletowing:. What is the towing capacity of

the towing vehicle? Be sure toread the tow vehiclemanufacturer'srecommendations.

. What is the distance that will betraveled? Some vehicles haverestrictions on how far and howlong they can tow.

. Is the proper towing equipmentgoing to be used? See yourdealer or trailering professionalfor additional advice andequipment recommendations.

. Is the vehicle ready to betowed? Just as preparing thevehicle for a long trip, make surethe vehicle is prepared to betowed.

Dinghy Towing (with AutomaticTransmission)

{ Caution

If the vehicle is towed with all fourwheels on the ground, thedrivetrain components could bedamaged. The repairs would notbe covered by the vehiclewarranty. Do not tow the vehiclewith all four wheels on theground.

Vehicles with an automatictransmission should not be towedwith all four wheels on the ground.If the vehicle must be towed, a dollyshould be used. See "Dolly Towing"that follows.

Dinghy Towing (with ManualTransmission)

Use the following procedure todinghy tow the vehicle from the frontwith all four wheels on the ground:

1. Position the vehicle being towedbehind the tow vehicle.


10-84 Vehicle Care

2. Shift the transmission into1 (First) gear and turn theengine off.

3. Set the parking brake.

4. Following the manufacturer'sinstructions, attach the vehiclebeing towed to the tow vehicle.

5. Shift the transmission to Neutral.

6. Release the parking brake.

When towing the vehicle forextended periods of time, start thevehicle as often as possible toprevent battery drain. This shouldbe done when the tow vehicle isparked.

Dinghy Towing from the Rear

The vehicle was not designed to betowed from the rear with all fourwheels on the ground.

Dolly Towing from the Front(Front-Wheel Drive)

Vehicles with front-wheel drive canbe dolly towed from the front.

Use the following procedure to dollytow the vehicle from the front:

1. Attach the dolly to the towvehicle following the dollymanufacturer's instructions.

2. Drive the front wheels onto thedolly.


Vehicle Care 10-85

3. Shift the automatic transmissioninto P (Park) or a manualtransmission into 1 (First) gear.

4. Firmly set the parking brake.

5. Use an adequate clampingdevice designed for towing toensure that the front wheels arelocked into the straight-aheadposition.

6. Secure the vehicle to the dollyfollowing the manufacturer'sinstructions.

7. Release the parking brake onlyafter the vehicle being towed isfirmly attached to the towingvehicle.


Dolly Towing from the Front(All-Wheel Drive)

Vehicles with all-wheel drive cannotbe dolly towed.

Dolly Towing from the Rear

The vehicle cannot be dolly towedfrom the rear.


10-86 Vehicle Care

Appearance Care

Exterior Care

Locks

Locks are lubricated at the factory.Use a de-icing agent only whenabsolutely necessary, and have thelocks greased after using. SeeRecommended Fluids andLubricants on page 11-11.

Washing the Vehicle

To preserve the vehicle's finish,wash it often and out of directsunlight.

{ Caution

Do not use petroleum-based,acidic, or abrasive cleaningagents as they can damage thevehicle's paint, metal, or plasticparts. If damage occurs, it wouldnot be covered by the vehiclewarranty. Approved cleaning

(Continued)

Caution (Continued)

products can be obtained fromyour dealer. Follow allmanufacturer directions regardingcorrect product usage, necessarysafety precautions, andappropriate disposal of anyvehicle care product.

{ Caution

Avoid using high-pressurewashes closer than 30 cm (12 in)to the surface of the vehicle. Useof power washers exceeding8,274 kPa (1,200 psi) can resultin damage or removal of paintand decals.

Thee symbol is on anyunderhood compartment electricalcenter that should not be power

washed. This could cause damagethat would not be covered by thevehicle warranty.

If using an automatic car wash,follow the car wash instructions. Thewindshield wiper and rear windowwiper, if equipped, must be off.Remove any accessories that maybe damaged or interfere with the carwash equipment.

Rinse the vehicle well, beforewashing and after, to remove allcleaning agents completely. If theyare allowed to dry on the surface,they could stain.

Dry the finish with a soft, cleanchamois or an all-cotton towel toavoid surface scratches and waterspotting.

Finish Care

Application of aftermarket clearcoatsealant/wax materials is notrecommended. If painted surfacesare damaged, see your dealer tohave the damage assessed andrepaired. Foreign materials such as


Vehicle Care 10-87

calcium chloride and other salts, icemelting agents, road oil and tar, treesap, bird droppings, chemicals fromindustrial chimneys, etc., candamage the vehicle's finish if theyremain on painted surfaces. Washthe vehicle as soon as possible.If necessary, use non-abrasivecleaners that are marked safe forpainted surfaces to remove foreignmatter.

Occasional hand waxing or mildpolishing should be done to removeresidue from the paint finish. Seeyour dealer for approved cleaningproducts.

Do not apply waxes or polishes touncoated plastic, vinyl, rubber,decals, simulated wood, or flat paintas damage can occur.

{ Caution

Machine compounding oraggressive polishing on abasecoat/clearcoat paint finish

(Continued)

Caution (Continued)

may damage it. Use onlynon-abrasive waxes and polishesthat are made for a basecoat/clearcoat paint finish on thevehicle.

To keep the paint finish looking new,keep the vehicle garaged orcovered whenever possible.

Protecting Exterior Bright MetalMoldings

{ Caution

Failure to clean and protect thebright metal moldings can resultin a hazy white finish or pitting.This damage would not becovered by the vehicle warranty.

The bright metal moldings on thevehicle are aluminum. To preventdamage always follow thesecleaning instructions:. Be sure the molding is cool to

the touch before applying anycleaning solution.

. Use a cleaning solutionapproved for aluminum. Somecleaners are highly acidic orcontain alkaline substances andcan damage the moldings.

. Always dilute a concentratedcleaner according to themanufacturer’s instructions.

. Do not use chrome cleaners.

. Do not use cleaners that are notintended for automotive use.

. Use a nonabrasive wax on thevehicle after washing to protectand extend the molding finish.


10-88 Vehicle Care

Cleaning Exterior Lamps/Lenses, Emblems, Decals andStripes

Use only lukewarm or cold water, asoft cloth, and a car washing soapto clean exterior lamps, lenses,emblems, decals and stripes. Followinstructions under "Washing theVehicle" previously in this section.

Lamp covers are made of plastic,and some have a UV protectivecoating.

Use only lukewarm water, a softcloth, and mild car washing soap toclean exterior lamps and lenses. Donot clean or wipe them while theyare dry.

Do not use any of the following onlamp covers:. Abrasive or caustic agents.. Washer fluids and other cleaning

agents in higher concentrationsthan suggested by themanufacturer.

. Solvents, alcohols, fuels,or other harsh cleaners.

. Ice scrapers or other hard items.

. Aftermarket appearance caps orcovers while the lamps areilluminated, due to excessiveheat generated.

{ Caution

Failure to clean lamps properlycan cause damage to the lampcover that would not be coveredby the vehicle warranty.

{ Caution

Using wax on low gloss blackfinish stripes can increase thegloss level and create anon-uniform finish. Clean lowgloss stripes with soap andwater only.

Air Intakes

Clear debris from the air intakes,between the hood and windshieldwhen washing the vehicle.

Windshield and Wiper Blades

Clean the outside of the windshieldwith glass cleaner.

Clean rubber blades using a lint-freecloth or paper towel soaked withwindshield washer fluid or a milddetergent. Wash the windshieldthoroughly when cleaning theblades. Bugs, road grime, sap, anda buildup of vehicle wash/waxtreatments may cause wiperstreaking.

Replace the wiper blades if they areworn or damaged. Damage can becaused by extreme dustyconditions, sand, salt, heat, sun,snow, and ice.

Weatherstrips

Apply Dielectric silicone grease onweatherstrips to make them lastlonger, seal better, and not stick or


Vehicle Care 10-89

squeak. Lubricate weatherstrips atleast once a year. Hot, dry climatesmay require more frequentapplication. Black marks fromrubber material on painted surfacescan be removed by rubbing with aclean cloth. See RecommendedFluids and Lubricants onpage 11-11.

Tires

Use a stiff brush with tire cleaner toclean the tires.

{ Caution

Using petroleum-based tiredressing products on the vehiclemay damage the paint finish and/or tires. When applying a tiredressing, always wipe off anyoverspray from all paintedsurfaces on the vehicle.

Wheels and Trim—Aluminumor Chrome

Use a soft, clean cloth with mildsoap and water to clean the wheels.After rinsing thoroughly with cleanwater, dry with a soft, clean towel.A wax may then be applied.

{ Caution

Chrome wheels and other chrometrim may be damaged if thevehicle is not washed after drivingon roads that have been sprayedwith magnesium, calcium,or sodium chloride. Thesechlorides are used on roads forconditions such as ice and dust.Always wash the chrome withsoap and water after exposure.

{ Caution

To avoid surface damage, do notuse strong soaps, chemicals,abrasive polishes, cleaners,brushes, or cleaners that containacid on aluminum orchrome-plated wheels. Use onlyapproved cleaners. Also, neverdrive a vehicle with aluminum orchrome-plated wheels through anautomatic car wash that usessilicone carbide tire cleaningbrushes. Damage could occurand the repairs would not becovered by the vehicle warranty.

Steering, Suspension, andChassis Components

Visually inspect steering,suspension, and chassiscomponents for damaged, loose,or missing parts or signs of wear atleast once a year.


10-90 Vehicle Care

Inspect power steering for properhook-up, binding, leaks, cracks,chafing, etc.

Visually check constant velocity jointboots and axle seals for leaks.

Body Component Lubrication

Lubricate all key lock cylinders,hood hinges, liftgate hinges, and thefuel door hinge unless thecomponents are plastic. Applyingsilicone grease on weatherstripswith a clean cloth will make themlast longer, seal better, and not stickor squeak.

Underbody Maintenance

At least twice a year, Spring andFall, use plain water to flush dirt anddebris from the vehicle's underbody.Your dealer or an underbody carwashing system can do this. If notremoved, rust and corrosion candevelop.

Sheet Metal Damage

If the vehicle is damaged andrequires sheet metal repair orreplacement, make sure the bodyrepair shop applies anti-corrosionmaterial to parts repaired orreplaced to restore corrosionprotection.

Original manufacturer replacementparts will provide the corrosionprotection while maintaining thevehicle warranty.

Finish Damage

Quickly repair minor chips andscratches with touch-up materialsavailable from your dealer to avoidcorrosion. Larger areas of finishdamage can be corrected in yourdealer's body and paint shop.

Chemical Paint Spotting

Airborne pollutants can fall uponand attack painted vehicle surfacescausing blotchy, ring-shapeddiscolorations, and small, irregular

dark spots etched into the paintsurface. See “Finish Care”previously in this section.

Interior CareTo prevent dirt particle abrasions,regularly clean the vehicle's interior.Immediately remove any soils. Notethat newspapers or dark garmentsthat can transfer color to homefurnishings can also permanentlytransfer color to the vehicle'sinterior.

Use a soft bristle brush to removedust from knobs and crevices on theinstrument cluster. Using a mildsoap solution, immediately removehand lotions, sunscreen, and insectrepellent from all interior surfaces orpermanent damage may result.

Your dealer may have products forcleaning the interior. Use cleanersspecifically designed for thesurfaces being cleaned to preventpermanent damage. Apply allcleaners directly to the cleaningcloth. Do not spray cleaners directly


Vehicle Care 10-91

on any switches or controls.Cleaners should be removedquickly. Never allow cleaners toremain on the surface beingcleaned for extended periodsof time.

Cleaners may contain solvents thatcan become concentrated in theinterior. Before using cleaners, readand adhere to all safety instructionson the label. While cleaning theinterior, maintain adequateventilation by opening the doors andwindows.

To prevent damage, do not cleanthe interior using the followingcleaners or techniques:. Never use a razor or any other

sharp object to remove a soilfrom any interior surface.

. Never use a brush with stiffbristles.

. Never rub any surfaceaggressively or with excessivepressure.

. Do not use laundry detergents ordishwashing soaps withdegreasers. For liquid cleaners,use approximately 20 drops per3.8 L (1 gal) of water.A concentrated soap solution willleave a residue that createsstreaks and attracts dirt. Do notuse solutions that contain strongor caustic soap.

. Do not heavily saturate theupholstery when cleaning.

. Do not use solvents or cleanerscontaining solvents.

Interior Glass

To clean, use a terry cloth fabricdampened with water. Wipe dropletsleft behind with a clean dry cloth.Commercial glass cleaners may beused, if necessary, after cleaningthe interior glass with plain water.

{ Caution

To prevent scratching, never useabrasive cleaners on automotiveglass. Abrasive cleaners oraggressive cleaning may damagethe rear window defogger.

Cleaning the windshield with waterduring the first three to six monthsof ownership will reduce tendencyto fog.

Speaker Covers

Vacuum around a speaker covergently, so that the speaker will notbe damaged. Clean spots with justwater and mild soap.

Coated Moldings

Coated moldings should be cleaned.. When lightly soiled, wipe with a

sponge or soft lint-free clothdampened with water.

. When heavily soiled, use warmsoapy water.


10-92 Vehicle Care

Fabric/Carpet/Suede

Start by vacuuming the surfaceusing a soft brush attachment. If arotating brush attachment is beingused during vacuuming, only use iton the floor carpet. Before cleaning,gently remove as much of the soilas possible using one of thefollowing techniques:. Gently blot liquids with a paper

towel. Continue blotting until nomore soil can be removed.

. For solid soils, remove as muchas possible prior to vacuuming.

To clean:

1. Saturate a clean lint-freecolorfast cloth with water.Microfiber cloth is recommendedto prevent lint transfer to thefabric or carpet.

2. Remove excess moisture bygently wringing until water doesnot drip from the cleaning cloth.

3. Start on the outside edge of thesoil and gently rub toward thecenter. Fold the cleaning cloth toa clean area frequently toprevent forcing the soil in to thefabric.

4. Continue gently rubbing thesoiled area until there is nolonger any color transfer fromthe soil to the cleaning cloth.

5. If the soil is not completelyremoved, use a mild soapsolution followed only by plainwater.

If the soil is not completelyremoved, it may be necessary touse a commercial upholsterycleaner or spot lifter. Test a smallhidden area for colorfastness beforeusing a commercial upholsterycleaner or spot lifter. If ringformation occurs, clean the entirefabric or carpet.

Following the cleaning process, apaper towel can be used to blotexcess moisture.

Cleaning High Gloss Surfacesand Vehicle Information andRadio Displays

For vehicles with high glosssurfaces or vehicle displays, use amicrofiber cloth to wipe surfaces.Before wiping the surface with themicrofiber cloth, use a soft bristlebrush to remove dirt that couldscratch the surface. Then use themicrofiber cloth by gently rubbing toclean. Never use window cleanersor solvents. Periodically hand washthe microfiber cloth separately,using mild soap. Do not use bleachor fabric softener. Rinse thoroughlyand air dry before next use.

{ Caution

Do not attach a device with asuction cup to the display. Thismay cause damage and wouldnot be covered by the warranty.


Vehicle Care 10-93

Instrument Panel, Leather,Vinyl, Other Plastic Surfaces,Low Gloss Paint Surfaces andNatural Open Pore WoodSurfaces

Use a soft microfiber clothdampened with water to removedust and loose dirt. For a morethorough cleaning, use a softmicrofiber cloth dampened with amild soap solution.

{ Caution

Soaking or saturating leather,especially perforated leather, aswell as other interior surfaces,may cause permanent damage.Wipe excess moisture from thesesurfaces after cleaning and allowthem to dry naturally. Never useheat, steam, spot lifters, or spotremovers. Do not use cleanersthat contain silicone or wax-basedproducts. Cleaners containing

(Continued)

Caution (Continued)

these solvents can permanentlychange the appearance and feelof leather or soft trim and are notrecommended.

Do not use cleaners that increasegloss, especially on the instrumentpanel. Reflected glare can decreasevisibility through the windshieldunder certain conditions.

{ Caution

Use of air fresheners may causepermanent damage to plasticsand painted surfaces. If an airfreshener comes in contact withany plastic or painted surface inthe vehicle, blot immediately andclean with a soft cloth dampenedwith a mild soap solution.Damage caused by air freshenerswould not be covered by thevehicle warranty.

Cargo Cover andConvenience Net

Wash with warm water and milddetergent. Do not use chlorinebleach. Rinse with cold water, andthen dry completely.

Care of Safety Belts

Keep belts clean and dry.

{ Warning

Do not bleach or dye safety belts.It may severely weaken them. Ina crash, they might not be able toprovide adequate protection.Clean safety belts only with mildsoap and lukewarm water.


10-94 Vehicle Care

Floor Mats

{ Warning

If a floor mat is the wrong size oris not properly installed, it caninterfere with the pedals.Interference with the pedals cancause unintended accelerationand/or increased stoppingdistance which can cause a crashand injury. Make sure the floormat does not interfere with thepedals.

Use the following guidelines forproper floor mat usage:. The original equipment floor

mats were designed for yourvehicle. If the floor mats needreplacing, it is recommendedthat GM certified floor mats bepurchased. Non-GM floor matsmay not fit properly and mayinterfere with the pedals. Alwayscheck that the floor mats do notinterfere with the pedals.

. Use the floor mat with thecorrect side up. Do not turnit over.

. Do not place anything on top ofthe driver side floor mat.

. Use only a single floor mat onthe driver side.

. Do not place one floor mat ontop of another.

Removing and Replacing theFloor Mats

Pull up on the rear of the floor matto unlock each retainer and remove.

Reinstall by lining up the floor matretainer openings over the carpetretainers and snapping into position.

Make sure the floor mat is properlysecured in place.

Verify the floor mat does notinterfere with the pedals.


Service and Maintenance 11-1

Service andMaintenance

General InformationGeneral Information . . . . . . . . . . 11-1

Maintenance ScheduleMaintenance Schedule . . . . . . . 11-2

Special Application ServicesSpecial ApplicationServices . . . . . . . . . . . . . . . . . . . . 11-8

Additional Maintenanceand CareAdditional Maintenanceand Care . . . . . . . . . . . . . . . . . . . 11-8

Recommended Fluids,Lubricants, and PartsRecommended Fluids andLubricants . . . . . . . . . . . . . . . . . 11-11

Maintenance ReplacementParts . . . . . . . . . . . . . . . . . . . . . . 11-12

Maintenance RecordsMaintenance Records . . . . . . 11-14

General InformationYour vehicle is an importantinvestment. This section describesthe required maintenance for thevehicle. Follow this schedule to helpprotect against major repairexpenses resulting from neglect orinadequate maintenance. It mayalso help to maintain the value ofthe vehicle if it is sold. It is theresponsibility of the owner to haveall required maintenance performed.

Your dealer has trained technicianswho can perform requiredmaintenance using genuinereplacement parts. They haveup-to-date tools and equipment forfast and accurate diagnostics. Manydealers have extended evening andSaturday hours, courtesytransportation, and onlinescheduling to assist with serviceneeds.

Your dealer recognizes theimportance of providingcompetitively priced maintenanceand repair services. With trained

technicians, the dealer is the placefor routine maintenance such as oilchanges and tire rotations andadditional maintenance items liketires, brakes, batteries, and wiperblades.

{ Caution

Damage caused by impropermaintenance can lead to costlyrepairs and may not be coveredby the vehicle warranty.Maintenance intervals, checks,inspections, recommended fluids,and lubricants are important tokeep the vehicle in good workingcondition.

The Tire Rotation and RequiredServices are the responsibility of thevehicle owner. It is recommended tohave your dealer perform theseservices every 12 000 km/7,500 mi.Proper vehicle maintenance helps tokeep the vehicle in good workingcondition, improves fuel economy,and reduces vehicle emissions.


11-2 Service and Maintenance

Because of the way people usevehicles, maintenance needs vary.There may need to be morefrequent checks and services. TheAdditional Required Services -Normal are for vehicles that:. Carry passengers and cargo

within recommended limits onthe Tire and Loading Informationlabel. See Vehicle Load Limitson page 9-10.

. Are driven on reasonable roadsurfaces within legal drivinglimits.

. Use the recommended fuel. SeeRecommended Fuel onpage 9-60.

Refer to the information in theMaintenance Schedule AdditionalRequired Services - Normal chart.

The Additional Required Services -Severe are for vehicles that are:. Mainly driven in heavy city traffic

in hot weather.. Mainly driven in hilly or

mountainous terrain.

. Frequently towing a trailer.

. Used for high speed orcompetitive driving.

. Used for taxi, police, or deliveryservice.

Refer to the information in theMaintenance Schedule AdditionalRequired Services - Severe chart.

{ Warning

Performing maintenance work canbe dangerous and can causeserious injury. Performmaintenance work only if therequired information, proper tools,and equipment are available.If they are not, see your dealer tohave a trained technician do thework. See Doing Your OwnService Work on page 10-3.

MaintenanceScheduleOwner Checks and Services

At Each Fuel Stop. Check the engine oil level. See

Engine Oil on page 10-11.

Once a Month. Check the tire inflation

pressures. See Tire Pressure onpage 10-48.

. Inspect the tires for wear. SeeTire Inspection on page 10-55.

. Check the windshield washerfluid level. See Washer Fluid onpage 10-23.

Engine Oil Change

When the CHANGE ENGINE OILSOON message displays, have theengine oil and filter changed withinthe next 1 000 km/600 mi. If drivenunder the best conditions, theengine oil life system might notindicate the need for vehicle service



for more than a year. The engine oiland filter must be changed at leastonce a year and the oil life systemmust be reset. Your trained dealertechnician can perform this work.If the engine oil life system is resetaccidentally, service the vehiclewithin 5 000 km/3,000 mi since thelast service. Reset the oil lifesystem when the oil is changed.See Engine Oil Life System onpage 10-13.

Tire Rotation and RequiredServices Every 12 000 km/7,500 mi

Rotate the tires, if recommended forthe vehicle, and perform thefollowing services. See TireRotation on page 10-55.. Check engine oil level and oil

life percentage. If needed,change engine oil and filter, andreset oil life system. See EngineOil on page 10-11 and EngineOil Life System on page 10-13.

. Check engine coolant level. SeeEngine Coolant on page 10-19.

. Check windshield washer fluidlevel. See Washer Fluid onpage 10-23.

. Visually inspect windshield wiperblades for wear, cracking,or contamination. See ExteriorCare on page 10-86. Replaceworn or damaged wiper blades.See Wiper Blade Replacementon page 10-29.

. Check tire inflation pressures.See Tire Pressure onpage 10-48.

. Inspect tire wear. See TireInspection on page 10-55.

. Visually check for fluid leaks.

. Inspect engine air cleaner filter.See Engine Air Cleaner/Filter onpage 10-16.

. Inspect brake system.

. Visually inspect steering,suspension, and chassiscomponents for damaged, loose,

or missing parts or signs ofwear. See Exterior Care onpage 10-86.

. Check restraint systemcomponents. See Safety SystemCheck on page 3-18.

. Visually inspect fuel system fordamage or leaks.

. Visually inspect exhaust systemand nearby heat shields forloose or damaged parts.

. Lubricate body components. SeeExterior Care on page 10-86.

. Check starter switch. See StarterSwitch Check on page 10-28.

. Check automatic transmissionshift lock control function. SeeAutomatic Transmission ShiftLock Control Function Check onpage 10-28.

. Check ignition transmission lock.See Ignition Transmission LockCheck on page 10-29.



. Check parking brake andautomatic transmission parkmechanism. See Park Brake andP (Park) Mechanism Check onpage 10-29.

. Check accelerator pedal fordamage, high effort, or binding.Replace if needed.

. Visually inspect gas strut forsigns of wear, cracks, or otherdamage. Check the hold openability of the strut. See yourdealer if service is required.

. Check tire sealant expirationdate, if equipped. See TireSealant and Compressor Kit onpage 10-64.

. Inspect sunroof track and seal,if equipped. See Sunroof onpage 2-22.



Maintenance ScheduleAdditional RequiredServices - Normal

12000km/7,500mi

24000km/15,000mi

36000km/22,500mi

48000km/30,000mi

60000km/37,500mi

72000km/45,000mi

84000km/52,500mi

96000km/60,000mi

108000km/67,500mi

120000km/75,000mi

132000km/82,500mi

144000km/90,000mi

156000km/97,500mi

168000km/105,000mi

180000km/112,500mi

192000km/120,000mi

204000km/127,500mi

216000km/135,000mi

228000km/142,500mi

240000km/150,000mi

Rotate tires and perform Required Services.Check engine oil level and oil life percentage.Change engine oil and filter, if needed.

@ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @

Replace passenger compartment air filter. (1) @ @ @ @ @ @

Inspect evaporative control system. (2) @ @ @

Replace engine air cleaner filter. (3) @ @ @

Except 2.0L Engine: Replace spark plugs. Inspectspark plug wires. @

2.0L Engine Only: Replace spark plugs. Inspectspark plug wires. @ @

Change automatic transmission fluid. @

Drain and fill engine cooling system. (4) @

Except with eAssist: Visually inspect accessorydrive belts. (5) @

Vehicles with eAssist: Visually inspect accessorydrive belts. (5) @

Replace brake/clutch fluid. (6) @



Footnotes — MaintenanceSchedule Additional RequiredServices - Normal

(1) Or every two years, whichevercomes first. More frequentreplacement may be needed if thevehicle is driven in areas with heavytraffic, areas with poor air quality,or areas with high dust levels.Replacement may also be needed ifthere is a reduction in air flow,excessive window fogging, or odors.

(2) Check all fuel and vapor linesand hoses for proper hook-up,routing, and condition.

(3) Or every four years, whichevercomes first.

(4) Or every five years, whichevercomes first. See Cooling System onpage 10-17.

(5) Or every 10 years, whichevercomes first. Inspect for fraying,excessive cracking, or damage;replace, if needed.

(6) Or every 10 years, whichevercomes first.



Maintenance ScheduleAdditional RequiredServices - Severe

12000km/7,500mi

24000km/15,000mi

36000km/22,500mi

48000km/30,000mi

60000km/37,500mi

72000km/45,000mi

84000km/52,500mi

96000km/60,000mi

108000km/67,500mi

120000km/75,000mi

132000km/82,500mi

144000km/90,000mi

156000km/97,500mi

168000km/105,000mi

180000km/112,500mi

192000km/120,000mi

204000km/127,500mi

216000km/135,000mi

228000km/142,500mi

240000km/150,000mi

Rotate tires and perform Required Services.Check engine oil level and oil life percentage.Change engine oil and filter, if needed.

@ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @

Replace passenger compartment air filter. (1) @ @ @ @ @ @

Inspect evaporative control system. (2) @ @ @

Replace engine air cleaner filter. (3) @ @ @

Change automatic transmission fluid. @ @ @

Change manual transmission fluid. @ @ @

Except 2.0L Engine: Replace spark plugs. Inspectspark plug wires. @

2.0L Engine Only: Replace spark plugs. Inspectspark plug wires. @ @

Drain and fill engine cooling system. (4) @

Except with eAssist: Visually inspect accessorydrive belts. (5) @

Vehicles with eAssist: Visually inspect accessorydrive belts. (5) @

Replace brake/clutch fluid. (6) @



Footnotes — MaintenanceSchedule Additional RequiredServices - Severe

(1) Or every two years, whichevercomes first. More frequentreplacement may be needed if thevehicle is driven in areas with heavytraffic, areas with poor air quality,or areas with high dust levels.Replacement may also be needed ifthere is a reduction in air flow,excessive window fogging, or odors.

(2) Check all fuel and vapor linesand hoses for proper hook-up,routing, and condition.

(3) Or every four years, whichevercomes first.

(4) Or every five years, whichevercomes first. See Cooling System onpage 10-17.

(5) Or every 10 years, whichevercomes first. Inspect for fraying,excessive cracking, or damage;replace, if needed.

(6) Or every 10 years, whichevercomes first.

Special ApplicationServices. Severe Commercial Use

Vehicles Only: Lubricate chassiscomponents every 5 000 km/3,000 mi.

. Have underbody flushing serviceperformed. See "UnderbodyMaintenance" in Exterior Careon page 10-86.

AdditionalMaintenance and CareYour vehicle is an importantinvestment and caring for it properlymay help to avoid future costlyrepairs. To maintain vehicleperformance, additionalmaintenance services may berequired.

It is recommended that your dealerperform these services — theirtrained dealer technicians knowyour vehicle best. Your dealer canalso perform a thoroughassessment with a multi-pointinspection to recommend when yourvehicle may need attention.

The following list is intended toexplain the services and conditionsto look for that may indicateservices are required.

Battery

The battery supplies power to startthe engine and operate anyadditional electrical accessories.



. To avoid break-down or failure tostart the vehicle, maintain abattery with full cranking power.

. Trained dealer technicians havethe diagnostic equipment to testthe battery and ensure that theconnections and cables arecorrosion-free.

Belts. Belts may need replacing if they

squeak or show signs ofcracking or splitting.

. Trained dealer technicians haveaccess to tools and equipmentto inspect the belts andrecommend adjustment orreplacement when necessary.

Brakes

Brakes stop the vehicle and arecrucial to safe driving.. Signs of brake wear may include

chirping, grinding, or squealingnoises, or difficulty stopping.

. Trained dealer technicians haveaccess to tools and equipmentto inspect the brakes andrecommend quality partsengineered for the vehicle.

Fluids

Proper fluid levels and approvedfluids protect the vehicle’s systemsand components. SeeRecommended Fluids andLubricants on page 11-11 for GMapproved fluids.. Engine oil and windshield

washer fluid levels should bechecked at every fuel fill.

. Instrument cluster lights maycome on to indicate that fluidsmay be low and need to befilled.

Hoses

Hoses transport fluids and shouldbe regularly inspected to ensurethat there are no cracks or leaks.With a multi-point inspection, yourdealer can inspect the hoses andadvise if replacement is needed.

Lamps

Properly working headlamps,taillamps, and brake lamps areimportant to see and be seen onthe road.. Signs that the headlamps need

attention include dimming, failureto light, cracking, or damage.The brake lamps need to bechecked periodically to ensurethat they light when braking.

. With a multi-point inspection,your dealer can check the lampsand note any concerns.

Shocks and Struts

Shocks and struts help aid in controlfor a smoother ride.. Signs of wear may include

steering wheel vibration, bounce/sway while braking, longerstopping distance, or uneventire wear.

. As part of the multi-pointinspection, trained dealertechnicians can visually inspect



the shocks and struts for signsof leaking, blown seals,or damage, and can advisewhen service is needed.

Tires

Tires need to be properly inflated,rotated, and balanced. Maintainingthe tires can save money and fuel,and can reduce the risk of tirefailure.. Signs that the tires need to be

replaced include three or morevisible treadwear indicators; cordor fabric showing through therubber; cracks or cuts in thetread or sidewall; or a bulge orsplit in the tire.

. Trained dealer technicians caninspect and recommend the righttires. Your dealer can alsoprovide tire/wheel balancingservices to ensure smoothvehicle operation at all speeds.Your dealer sells and servicesname brand tires.

Vehicle Care

To help keep the vehicle looking likenew, vehicle care products areavailable from your dealer. Forinformation on how to clean andprotect the vehicle’s interior andexterior, see Interior Care onpage 10-90 and Exterior Care onpage 10-86.

Wheel Alignment

Wheel alignment is critical forensuring that the tires deliveroptimal wear and performance.. Signs that the alignment may

need to be adjusted includepulling, improper vehiclehandling, or unusual tire wear.

. Your dealer has the requiredequipment to ensure properwheel alignment.

Windshield

For safety, appearance, and thebest viewing, keep the windshieldclean and clear.

. Signs of damage includescratches, cracks, and chips.

. Trained dealer technicians caninspect the windshield andrecommend proper replacementif needed.

Wiper Blades

Wiper blades need to be cleanedand kept in good condition toprovide a clear view.. Signs of wear include streaking,

skipping across the windshield,and worn or split rubber.

. Trained dealer technicians cancheck the wiper blades andreplace them when needed.



Recommended Fluids, Lubricants, and Parts

Recommended Fluids and Lubricants

Usage Fluid/Lubricant

Engine Oil Use only engine oil licensed to the dexos1 specification of the proper SAEviscosity grade. ACDelco dexos1 Synthetic Blend is recommended. SeeEngine Oil on page 10-11.

Engine Coolant 50/50 mixture of clean, drinkable water and use only DEX-COOL Coolant.See Engine Coolant on page 10-19.

Hydraulic Brake/Clutch System DOT 3 Hydraulic Brake Fluid (GM Part No. 19299818, inCanada 19299819).

Windshield Washer Automotive windshield washer fluid that meets regional freeze protectionrequirements.

Hydraulic Power Steering System DEXRON®-VI Automatic Transmission Fluid.

Automatic Transmission DEXRON®-VI Automatic Transmission Fluid.

Manual Transmission Manual Transmission Fluid (GM Part No. 19259104, in Canada 19259105).

Key Lock Cylinders Multi-Purpose Lubricant, Superlube (GM Part No. 12346241, inCanada 10953474).

Hood Latch Assembly, SecondaryLatch, Pivots, Spring Anchor, and

Release Pawl

Lubriplate Lubricant Aerosol (GM Part No. 89021668, inCanada 89021674) or lubricant meeting requirements of NLGI #2,Category LB or GC-LB.



Usage Fluid/Lubricant

Hood and Door Hinges Multi-Purpose Lubricant, Superlube (GM Part No. 12346241, inCanada 10953474).

Weatherstrip Conditioning Weatherstrip Lubricant (GM Part No. 3634770, in Canada 10953518) orDielectric Silicone Grease (GM Part No. 12345579, in Canada 10953481).

Maintenance Replacement PartsReplacement parts identified below by name, part number, or specification can be obtained from your dealer.

Part GM Part Number ACDelco Part Number

Engine Air Cleaner/Filter 55560894 A3128C

Engine Oil Filter

2.0L L4 Engine 12640445 PF64

2.4L L4 Engine 12605566 PF457G

Passenger Compartment Air Filter Element 13271191 CF176

Spark Plugs

2.0L L4 Engine 12647827 41–125

2.4L L4 Engine 12620540 41–108



Part GM Part Number ACDelco Part Number

Wiper Blades

Driver Side – 60.0 cm (23.62 in) 13227404 —

Passenger Side – 45.0 cm (17.7 in) 13227405 —



Maintenance RecordsAfter the scheduled services are performed, record the date, odometer reading, who performed the service, and thetype of services performed in the boxes provided. Retain all maintenance receipts.

DateOdometerReading

Serviced By Services Performed



DateOdometerReading




DateOdometerReading




DateOdometerReading




2 NOTES


Technical Data 12-1

Technical Data

Vehicle IdentificationVehicle IdentificationNumber (VIN) . . . . . . . . . . . . . . 12-1

Service Parts IdentificationLabel . . . . . . . . . . . . . . . . . . . . . . . 12-1

Vehicle DataCapacities andSpecifications . . . . . . . . . . . . . . 12-2

Engine Drive Belt Routing . . . 12-4

Vehicle Identification

Vehicle IdentificationNumber (VIN)

This legal identifier is in the frontcorner of the instrument panel, onthe left side of the vehicle. It can beseen through the windshield fromoutside. The VIN also appears onthe Vehicle Certification and ServiceParts labels and certificates of titleand registration.

Engine Identification

The eighth character in the VIN isthe engine code. This codeidentifies the vehicle's engine,specifications, and replacementparts. See “Engine Specifications”under Capacities and Specificationson page 12-2 for the vehicle'sengine code.

Service PartsIdentification LabelThis label, in either the glove box orthe trunk area, has the followinginformation:. Vehicle Identification

Number (VIN).. Model designation.. Paint information.. Production options and special

equipment.

Do not remove this label from thevehicle.


12-2 Technical Data

Vehicle Data

Capacities and Specifications

ApplicationCapacities

Metric English

Air Conditioning Refrigerant For the air conditioning system refrigerant type andcharge amount, see the refrigerant label under the

hood. See your dealer for more information.

Engine Cooling System

2.0L L4 Engine 7.8 L 8.2 qt

2.4L L4 Engine (LEA) 7.1 L 7.5 qt

2.4L L4 Engine (LUK) 9.6 L 10.1 qt

Engine Oil with Filter

2.0L L4 Engine AWD 5.7 L 6.0 qt

2.0L L4 Engine FWD 4.7 L 5.0 qt

2.4L L4 Engine 4.7 L 5.0 qt

Fuel Tank

2.0L L4 Engine 70.4 L 18.6 gal

2.4L L4 Engine (LEA) 70.4 L 18.6 gal


Technical Data 12-3

ApplicationCapacities

Metric English

2.4L L4 Engine (LUK) 59.8 L 15.8 gal

Wheel Nut Torque 150Y 110 lb ft

All capacities are approximate. When adding, be sure to fill to the approximate level, as recommended in thismanual. Recheck fluid level after filling.

Engine Specifications

Engine VIN Code Spark Plug Gap

2.0L L4 Engine X 0.75–0.90 mm (0.030–0.035 in)

2.4L L4 Engine (LEA) K 0.75–0.90 mm (0.030–0.035 in)

2.4L L4 Engine (LUK) R 0.75–0.90 mm (0.030–0.035 in)


12-4 Technical Data

Engine Drive Belt Routing

2.0L Engine

2.4L LUK Engine

Belt removal and installationrequires special tools. See yourdealer for service.

2.4L LEA Engine


Customer Information 13-1

CustomerInformation

Customer InformationCustomer SatisfactionProcedure . . . . . . . . . . . . . . . . . . 13-1

Customer AssistanceOffices . . . . . . . . . . . . . . . . . . . . . 13-3

Customer Assistance for TextTelephone (TTY) Users . . . . . 13-4

Online Owner Center . . . . . . . . 13-4GM Mobility ReimbursementProgram . . . . . . . . . . . . . . . . . . . . 13-5

Roadside AssistanceProgram . . . . . . . . . . . . . . . . . . . . 13-5

Scheduling ServiceAppointments . . . . . . . . . . . . . . 13-7

Courtesy TransportationProgram . . . . . . . . . . . . . . . . . . . . 13-7

Collision Damage Repair . . . . 13-9Service PublicationsOrdering Information . . . . . . 13-11

Reporting Safety DefectsReporting Safety Defects tothe United StatesGovernment . . . . . . . . . . . . . . . 13-12

Reporting Safety Defects tothe CanadianGovernment . . . . . . . . . . . . . . . 13-13

Reporting Safety Defects toGeneral Motors . . . . . . . . . . . 13-13

Vehicle Data Recording andPrivacyVehicle Data Recording andPrivacy . . . . . . . . . . . . . . . . . . . . 13-13

Event Data Recorders . . . . . . 13-14OnStar® . . . . . . . . . . . . . . . . . . . . 13-14Infotainment System . . . . . . . . 13-15Radio FrequencyIdentification (RFID) . . . . . . . 13-15

Radio FrequencyStatement . . . . . . . . . . . . . . . . . 13-15

Customer Information

Customer SatisfactionProcedureYour satisfaction and goodwill areimportant to your dealer and toBuick. Normally, any concerns withthe sales transaction or theoperation of the vehicle will beresolved by your dealer's sales orservice departments. Sometimes,however, despite the best intentionsof all concerned, misunderstandingscan occur. If your concern has notbeen resolved to your satisfaction,the following steps should be taken:

STEP ONE: Discuss your concernwith a member of dealershipmanagement. Normally, concernscan be quickly resolved at that level.If the matter has already beenreviewed with the sales, service,or parts manager, contact the ownerof your dealership or the generalmanager.


13-2 Customer Information

STEP TWO: If after contacting amember of dealership management,it appears your concern cannot beresolved by your dealership withoutfurther help, in the U.S., call1-800-521-7300. In Canada, contactGeneral Motors of CanadaCustomer Care Centre at 1‐800-263-3777 (English) or1-800-263-7854 (French).

We encourage you to call thetoll-free number in order to give theinquiry prompt attention. Have thefollowing information available togive the Customer Assistancerepresentative:. Vehicle Identification

Number (VIN). This is availablefrom the vehicle registration ortitle, or the plate at the top left ofthe instrument panel and visiblethrough the windshield.

. Dealership name and location.

. Vehicle delivery date andpresent mileage.

When contacting Buick, rememberthat your concern will likely beresolved at a dealer's facility. That iswhy we suggest following Step Onefirst.

STEP THREE — U.S. Owners:Both General Motors and yourdealer are committed to makingsure you are completely satisfiedwith the new vehicle. However,if you continue to remain unsatisfiedafter following the procedureoutlined in Steps One and Two, youcan file with the Better BusinessBureau (BBB) Auto Line® Programto enforce your rights.

The BBB Auto Line Program is anout-of-court program administeredby the Council of Better BusinessBureaus to settle automotivedisputes regarding vehicle repairs orthe interpretation of the New VehicleLimited Warranty. Although you maybe required to resort to this informaldispute resolution program prior tofiling a court action, use of theprogram is free of charge and yourcase will generally be heard within

40 days. If you do not agree with thedecision given in your case, youmay reject it and proceed with anyother venue for relief availableto you.

You may contact the BBB Auto LineProgram using the toll-freetelephone number or write them atthe following address:

BBB Auto Line ProgramCouncil of Better Business Bureaus,Inc.4200 Wilson BoulevardSuite 800Arlington , VA 22203-1838

Telephone: 1-800-955-5100www.dr.bbb.org/goauto

This program is available in all50 states and the District ofColumbia. Eligibility is limited byvehicle age, mileage, and otherfactors. General Motors reservesthe right to change eligibilitylimitations and/or discontinue itsparticipation in this program.



STEP THREE — CanadianOwners: In the event that you donot feel your concerns have beenaddressed after following theprocedure outlined in Steps Oneand Two, General Motors of CanadaLimited wants you to be aware of itsparticipation in a no-chargeMediation/Arbitration program.General Motors of Canada Limitedhas committed to binding arbitrationof owner disputes involvingfactory-related vehicle serviceclaims. The program provides forthe review of the facts involved byan impartial third party arbiter, andmay include an informal hearingbefore the arbiter. The program isdesigned so that the entire disputesettlement process, from the timeyou file your complaint to the finaldecision, should be completed inapproximately 70 days. We believeour impartial program offersadvantages over courts in mostjurisdictions because it is informal,quick, and free of charge.

For further information concerningeligibility in the Canadian MotorVehicle Arbitration Plan (CAMVAP),call toll-free 1-800-207-0685, or callthe General Motors Customer CareCentre, 1-800-263-3777 (English),1-800-263-7854 (French),or write to:

Mediation/Arbitration Programc/o Customer Care CentreGeneral Motors of Canada LimitedMail Code: CA1-163-0051908 Colonel Sam DriveOshawa , Ontario L1H 8P7

The inquiry should be accompaniedby the Vehicle IdentificationNumber (VIN).

Customer AssistanceOfficesBuick encourages customers to callthe toll-free number for assistance.However, if a customer wishes towrite or e-mail Buick, the lettershould be addressed to:

United States and Puerto Rico

Buick Customer Assistance CenterP.O. Box 33136Detroit, MI 48232-5136www.Buick.com

1-800-521-73001-800-832-8425 (For TextTelephone devices (TTYs))Roadside Assistance:1-800-252-1112

From U.S. Virgin Islands:

1-800-496-9994



Canada

General Motors of Canada LimitedCustomer Care Centre, Mail Code:CA1-163-0051908 Colonel Sam DriveOshawa, Ontario L1H 8P7www.gm.ca

1-800-263-3777 (English)1-800-263-7854 (French)1-800-263-3830 (For TextTelephone devices (TTYs))Roadside Assistance:1-800-268-6800

All Overseas Locations

Please contact the local GeneralMotors Business Unit.

Customer Assistance forText Telephone (TTY)UsersTo assist customers who are deaf,hard of hearing, or speech-impairedand who use Text Telephones(TTYs), Buick has TTY equipmentavailable at its Customer Assistance

Center. Any TTY user cancommunicate with Buick by dialing:1-800-832-8425. TTY users inCanada can dial 1‐800‐263-3830.

Online Owner Center

Online Owner Experience(U.S.) my.buick.com

The Buick online owner experienceis a one-stop resource that allowsinteraction with Buick and keepsimportant vehicle-specificinformation in one place.

Membership Benefits

E (Vehicle Information):Download owner manuals and viewvehicle-specific how-to videos.

G (Maintenance Information):View maintenance schedules,required alerts, OnStar onboardvehicle diagnostic information, andschedule service appointments.

I (Service History): Viewprintable dealer-recorded servicerecords and self-recorded servicerecords.

D (Preferred DealerInformation): Select a preferreddealer and view dealer location,maps, phone numbers, and hours.

J (Warranty TrackingInformation): Track the vehicle’swarranty information.

J (Recall Information): Viewactive recalls or search by VehicleIdentification Number (VIN). SeeVehicle Identification Number (VIN)on page 12-1.

H (Other Account Information):View GM Card, SiriusXM Satelliteradio, and OnStar accountinformation.

F (Live Chat Support): Chat livewith online help representatives.

Visit my.buick.com to register yourvehicle.



Buick Owner Centre (Canada)buickowner.ca

Take a trip to the Buick OwnerCentre:. Chat live with online help

representatives.. Use the Vehicle Tools section.. Access third party enthusiast

sites and social media networks.. Locate owner resources such as

lease-end, financing, andwarranty information.

. Retrieve your favorite articles,quizzes, tips and multimediagalleries organized into theFeatures and Auto CareSections.

. Download the owner manual foryour vehicle, quickly and easily.

. Find the Buick-recommendedmaintenance services for yourvehicle.

GM MobilityReimbursement Program

This program is available toqualified applicants for costreimbursement of eligibleaftermarket adaptive equipmentrequired for the vehicle, such ashand controls or a wheelchair/scooter lift for the vehicle.

For more information on the limitedoffer, visit www.gmmobility.com orcall the GM Mobility AssistanceCenter at 1-800-323-9935. TextTelephone (TTY) users, call1-800-833-9935.

General Motors of Canada also hasa Mobility Program. Visit www.gm.caor call 1-800-GM-DRIVE (463-7483)for details. TTY users call1-800-263-3830.

Roadside AssistanceProgramFor U.S.-purchased vehicles, call1-800-252-1112; (Text Telephone(TTY): 1-888-889-2438).

For Canadian-purchased vehicles,call 1-800-268-6800.

Service is available 24 hours a day,365 days a year.

Calling for Assistance

When calling Roadside Assistance,have the following informationready:. Your name, home address, and

home telephone number.. Telephone number of your

location.. Location of the vehicle.



. Model, year, color, and licenseplate number of the vehicle.

. Odometer reading, VehicleIdentification Number (VIN), anddelivery date of the vehicle.

. Description of the problem.

Coverage

Services are provided up to 6 years/110 000 km (70,000 mi), whichevercomes first.

In the U.S., anyone driving thevehicle is covered. In Canada, aperson driving the vehicle withoutpermission from the owner is notcovered.

Roadside Assistance is not a part ofthe New Vehicle Limited Warranty.General Motors North America andBuick reserve the right to make anychanges or discontinue theRoadside Assistance program atany time without notification.

General Motors North America andBuick reserve the right to limitservices or payment to an owner or

driver if they decide the claims aremade too often, or the same type ofclaim is made many times.

Services Provided. Emergency Fuel Delivery:

Delivery of enough fuel for thevehicle to get to the nearestservice station.

. Lock-Out Service: Service tounlock the vehicle if you arelocked out. A remote unlock maybe available if you haveOnStar®. For security reasons,the driver must presentidentification before this serviceis given.

. Emergency Tow from a PublicRoad or Highway: Tow to thenearest Buick dealer forwarranty service, or if the vehiclewas in a crash and cannot bedriven. Assistance is also givenwhen the vehicle is stuck insand, mud, or snow.

. Flat Tire Change: Service tochange a flat tire with the sparetire. The spare tire, if equipped,must be in good condition andproperly inflated. It is the owner'sresponsibility for the repair orreplacement of the tire if it is notcovered by the warranty.

. Battery Jump Start: Service tojump start a dead battery.

Services Not Included inRoadside Assistance. Impound towing caused by

violation of any laws.. Legal fines.. Mounting, dismounting,

or changing of snow tires,chains, or other traction devices.

. Towing or services for vehiclesdriven on a non-public road orhighway.



Services Specific toCanadian-Purchased Vehicles. Fuel delivery: Reimbursement

is up to 7 liters. Diesel fueldelivery may be restricted.Propane and other fuels are notprovided through this service.

. Lock-Out Service: Vehicleregistration is required.

. Trip Interruption Benefits andAssistance: Must be over150 kilometers from where yourtrip was started to qualify.General Motors of CanadaLimited requirespre-authorization, originaldetailed receipts, and a copy ofthe repair orders. Onceauthorization has been received,the Roadside Assistance advisorwill help you make arrangementsand explain how to receivepayment.

. Alternative Service: Ifassistance cannot be providedright away, the RoadsideAssistance advisor may give

permission to get localemergency road service. You willreceive payment, up to $100,after sending the original receiptto Roadside Assistance.Mechanical failures may becovered, however any cost forparts and labor for repairs notcovered by the warranty are theowner responsibility.

Scheduling ServiceAppointmentsWhen the vehicle requires warrantyservice, contact your dealer andrequest an appointment. Byscheduling a service appointmentand advising the service consultantof your transportation needs, yourdealer can help minimize yourinconvenience.

If the vehicle cannot be scheduledinto the service departmentimmediately, keep driving it until itcan be scheduled for service,unless, of course, the problem is

safety related. If it is, please callyour dealership, let them know this,and ask for instructions.

If your dealer requests you to bringthe vehicle for service, you areurged to do so as early in the workday as possible to allow forsame-day repair.

Courtesy TransportationProgramTo enhance your ownershipexperience, we and our participatingdealers are proud to offer CourtesyTransportation, a customer supportprogram for vehicles with theBumper-to-Bumper (Base WarrantyCoverage period in Canada),extended powertrain, and/orwarranties specific to e-Assist inboth the U.S. and Canada.

Several Courtesy Transportationoptions are available to assist inreducing inconvenience whenwarranty repairs are required.



Courtesy Transportation is not apart of the New Vehicle LimitedWarranty. A separate bookletentitled “Limited Warranty andOwner Assistance Information”furnished with each new vehicleprovides detailed warranty coverageinformation.

Transportation Options

Warranty service can generally becompleted while you wait. However,if you are unable to wait, GM helpsto minimize inconvenience byproviding several transportationoptions. Depending on thecircumstances, your dealer can offerone of the following:

Shuttle Service

Shuttle service is the preferredmeans of offering CourtesyTransportation. Dealers may provideshuttle service to get you to yourdestination with minimal interruptionof your daily schedule. This includes

one-way or round-trip shuttle servicewithin reasonable time and distanceparameters of your dealer's area.

Public Transportation or FuelReimbursement

If the vehicle requires overnightwarranty repairs, and publictransportation is used instead ofyour dealer's shuttle service, theexpense must be supported byoriginal receipts and can only be upto the maximum amount allowed byGM for shuttle service. In addition,for U.S. customers, should youarrange transportation through afriend or relative, limitedreimbursement for reasonable fuelexpenses may be available. Claimamounts should reflect actual costsand be supported by originalreceipts. See your dealer forinformation regarding the allowanceamounts for reimbursement of fuelor other transportation costs.

Courtesy Rental Vehicle

Your dealer may arrange to provideyou with a courtesy rental vehicle orreimburse you for a rental vehiclethat you obtain if the vehicle is keptfor an overnight warranty repair.Rental reimbursement will be limitedand must be supported by originalreceipts. This requires that you signand complete a rental agreementand meet state/provincial, local, andrental vehicle provider requirements.Requirements vary and may includeminimum age requirements,insurance coverage, credit card, etc.You are responsible for fuel usagecharges and may also beresponsible for taxes, levies, usagefees, excessive mileage, or rentalusage beyond the completion of therepair.

It may not be possible to provide alike vehicle as a courtesy rental.



Additional ProgramInformation

All program options, such as shuttleservice, may not be available atevery dealer. Please contact yourdealer for specific information aboutavailability. All CourtesyTransportation arrangements will beadministered by appropriate dealerpersonnel.

General Motors reserves the right tounilaterally modify, change,or discontinue CourtesyTransportation at any time and toresolve all questions of claimeligibility pursuant to the terms andconditions described herein at itssole discretion.

Collision Damage RepairIf the vehicle is involved in acollision and it is damaged, have thedamage repaired by a qualifiedtechnician using the properequipment and quality replacementparts. Poorly performed collisionrepairs diminish the vehicle resale

value, and safety performance canbe compromised in subsequentcollisions.

Collision Parts

Genuine GM Collision parts are newparts made with the same materialsand construction methods as theparts with which the vehicle wasoriginally built. Genuine GMCollision parts are the best choice toensure that the vehicle's designedappearance, durability, and safetyare preserved. The use of GenuineGM parts can help maintain the GMNew Vehicle Limited Warranty.

Recycled original equipment partsmay also be used for repair. Theseparts are typically removed fromvehicles that were total losses inprior crashes. In most cases, theparts being recycled are fromundamaged sections of the vehicle.A recycled original equipment GMpart may be an acceptable choice tomaintain the vehicle's originallydesigned appearance and safetyperformance; however, the history of

these parts is not known. Such partsare not covered by the GM NewVehicle Limited Warranty, and anyrelated failures are not covered bythat warranty.

Aftermarket collision parts are alsoavailable. These are made bycompanies other than GM and maynot have been tested for the vehicle.As a result, these parts may fitpoorly, exhibit premature durability/corrosion problems, and may notperform properly in subsequentcollisions. Aftermarket parts are notcovered by the GM New VehicleLimited Warranty, and any vehiclefailure related to such parts is notcovered by that warranty.

Repair Facility

GM also recommends that youchoose a collision repair facility thatmeets your needs before you everneed collision repairs. Your dealermay have a collision repair centerwith GM-trained technicians andstate‐of‐the‐art equipment, or beable to recommend a collision repair



center that has GM-trainedtechnicians and comparableequipment.

Insuring the Vehicle

Protect your investment in the GMvehicle with comprehensive andcollision insurance coverage. Thereare significant differences in thequality of coverage afforded byvarious insurance policy terms.Many insurance policies providereduced protection to the GMvehicle by limiting compensation fordamage repairs through the use ofaftermarket collision parts. Someinsurance companies will notspecify aftermarket collision parts.When purchasing insurance, werecommend that you ensure that thevehicle will be repaired with GMoriginal equipment collision parts.If such insurance coverage is notavailable from your currentinsurance carrier, consider switchingto another insurance carrier.

If the vehicle is leased, the leasingcompany may require you to haveinsurance that ensures repairs withGenuine GM Original EquipmentManufacturer (OEM) parts orGenuine Manufacturer replacementparts. Read the lease carefully, asyou may be charged at the end ofthe lease for poor quality repairs.

If a Crash Occurs

If there has been an injury, callemergency services for help. Do notleave the scene of a crash until allmatters have been taken care of.Move the vehicle only if its positionputs you in danger, or you areinstructed to move it by a policeofficer.

Give only the necessary informationto police and other parties involvedin the crash.

For emergency towing seeRoadside Assistance Program onpage 13-5.

Gather the following information:. Driver name, address, and

telephone number.. Driver license number.. Owner name, address, and

telephone number.. Vehicle license plate number.. Vehicle make, model, and

model year.. Vehicle Identification

Number (VIN).. Insurance company and policy

number.. General description of the

damage to the other vehicle.

Choose a reputable repair facilitythat uses quality replacement parts.See “Collision Parts” earlier in thissection.

If the airbag has inflated, see WhatWill You See after an AirbagInflates? on page 3-23.



Managing the Vehicle DamageRepair Process

In the event that the vehicle requiresdamage repairs, GM recommendsthat you take an active role in itsrepair. If you have a pre-determinedrepair facility of choice, take thevehicle there, or have it towed there.Specify to the facility that anyrequired replacement collision partsbe original equipment parts, eithernew Genuine GM parts or recycledoriginal GM parts. Remember,recycled parts will not be covered bythe GM vehicle warranty.

Insurance pays the bill for the repair,but you must live with the repair.Depending on your policy limits,your insurance company mayinitially value the repair usingaftermarket parts. Discuss this withthe repair professional, and insist onGenuine GM parts. Remember,if the vehicle is leased, you may beobligated to have the vehiclerepaired with Genuine GM parts,even if your insurance coveragedoes not pay the full cost.

If another party's insurancecompany is paying for the repairs,you are not obligated to accept arepair valuation based on thatinsurance company's collision policyrepair limits, as you have nocontractual limits with that company.In such cases, you can have controlof the repair and parts choices aslong as the cost stays withinreasonable limits.

Service PublicationsOrdering Information

Service Manuals

Service Manuals have the diagnosisand repair information on theengines, transmission, axle,suspension, brakes, electrical,steering, body, etc.

Service Bulletins

Service Bulletins give additionaltechnical service informationneeded to knowledgeably serviceGeneral Motors cars and trucks.

Each bulletin contains instructionsto assist in the diagnosis andservice of the vehicle.

Owner Information

Owner publications are writtenspecifically for owners and intendedto provide basic operationalinformation about the vehicle. TheOwner Manual includes theMaintenance Schedule for allmodels.

In-Portfolio: Includes a Portfolio,Owner Manual, and WarrantyManual.

RETAIL SELL PRICE:$35.00 (U.S.) plus handling andshipping fees.

Without Portfolio: OwnerManual only.

RETAIL SELL PRICE:$25.00 (U.S.) plus handling andshipping fees.



Current and Past Models

Technical Service Bulletins andManuals are available for currentand past model GM vehicles.

ORDER TOLL FREE:1-800-551-4123 Monday – Friday8:00 AM – 6:00 PM Eastern Time

For Credit Card Orders Only(VISA-MasterCard-Discover), seeHelm, Inc. at: www.helminc.com.

Or write to:

Helm, IncorporatedAttention: Customer Service47911 Halyard DrivePlymouth, MI 48170

Prices are subject to change withoutnotice and without incurringobligation. Allow ample time fordelivery.

All listed prices are quoted in U.S.funds. Make checks payable in U.S.funds.

Reporting SafetyDefects

Reporting Safety Defectsto the United StatesGovernmentIf you believe that your vehiclehas a defect which could causea crash or could cause injury ordeath, you should immediatelyinform the National HighwayTraffic Safety Administration(NHTSA) in addition to notifyingGeneral Motors.

If NHTSA receives similarcomplaints, it may open aninvestigation, and if it finds thata safety defect exists in a groupof vehicles, it may order a recalland remedy campaign.However, NHTSA cannotbecome involved in individualproblems between you, yourdealer, or General Motors.

To contact NHTSA, you may callthe Vehicle Safety Hotlinetoll-free at 1-888-327-4236 (TTY:1-800-424-9153); go tohttp://www.safercar.gov; orwrite to:

Administrator, NHTSA1200 New Jersey Avenue, S.E.Washington, D.C. 20590

You can also obtain otherinformation about motor vehiclesafety fromhttp://www.safercar.gov.



Reporting Safety Defectsto the CanadianGovernmentIf you live in Canada, and youbelieve that the vehicle has a safetydefect, notify Transport Canadaimmediately, and notify GeneralMotors of Canada Limited. CallTransport Canada at1-800-333-0510 or write to:

Transport CanadaRoad Safety Branch80 rue NoelGatineau , QC J8Z 0A1

Reporting Safety Defectsto General MotorsIn addition to notifying NHTSA (orTransport Canada) in a situation likethis, please notify General Motors.

Call 1-800-521-7300, or write:

Buick Customer Assistance CenterP.O. Box 33136Detroit , MI 48232-5136

In Canada, call 1-800-263-3777(English) or 1-800-263-7854(French), or write:

General Motors of Canada LimitedCustomer Care Centre, Mail Code:CA1-163-0051908 Colonel Sam DriveOshawa , Ontario L1H 8P7

Vehicle DataRecording andPrivacyThe vehicle has a number ofcomputers that record informationabout the vehicle’s performance andhow it is driven. For example, thevehicle uses computer modules tomonitor and control engine andtransmission performance, tomonitor the conditions for airbagdeployment and deploy them in acrash, and, if equipped, to provideantilock braking to help the drivercontrol the vehicle. These modulesmay store data to help the dealertechnician service the vehicle.Some modules may also store dataabout how the vehicle is operated,such as rate of fuel consumption oraverage speed. These modules mayretain personal preferences, such asradio presets, seat positions, andtemperature settings.



Event Data RecordersThis vehicle is equipped with anevent data recorder (EDR). Themain purpose of an EDR is torecord, in certain crash or nearcrash-like situations, such as an airbag deployment or hitting a roadobstacle, data that will assist inunderstanding how a vehicle’ssystems performed. The EDR isdesigned to record data related tovehicle dynamics and safetysystems for a short period of time,typically 30 seconds or less. TheEDR in this vehicle is designed torecord such data as:. How various systems in your

vehicle were operating;. Whether or not the driver and

passenger safety belts werebuckled/fastened;

. How far (if at all) the driver wasdepressing the accelerator and/or brake pedal; and,

. How fast the vehicle wastraveling.

These data can help provide abetter understanding of thecircumstances in which crashes andinjuries occur. NOTE: EDR data arerecorded by your vehicle only if anon-trivial crash situation occurs; nodata are recorded by the EDR undernormal driving conditions and nopersonal data (e.g., name, gender,age, and crash location) arerecorded. However, other parties,such as law enforcement, couldcombine the EDR data with the typeof personally identifying dataroutinely acquired during a crashinvestigation.

To read data recorded by an EDR,special equipment is required, andaccess to the vehicle or the EDR isneeded. In addition to the vehiclemanufacturer, other parties, such aslaw enforcement, that have thespecial equipment, can read theinformation if they have access tothe vehicle or the EDR.

GM will not access this data orshare it with others except: with theconsent of the vehicle owner or,

if the vehicle is leased, with theconsent of the lessee; in responseto an official request by police orsimilar government office; as part ofGM's defense of litigation throughthe discovery process; or, asrequired by law. Data that GMcollects or receives may also beused for GM research needs or maybe made available to others forresearch purposes, where a need isshown and the data is not tied to aspecific vehicle or vehicle owner.

OnStar®

If the vehicle is equipped withOnStar® and has an activesubscription, additional data may becollected through the OnStarsystem. This includes informationabout the vehicle’s operation;collisions involving the vehicle; theuse of the vehicle and its features;and, in certain situations, thelocation and approximate GPSspeed of the vehicle. Refer to the



OnStar Terms and Conditions andPrivacy Statement on the OnStarwebsite.

Infotainment SystemIf the vehicle is equipped with anavigation system as part of theinfotainment system, use of thesystem may result in the storage ofdestinations, addresses, telephonenumbers, and other trip information.See the infotainment manual forinformation on stored data and fordeletion instructions.

Radio FrequencyIdentification (RFID)RFID technology is used in somevehicles for functions such as tirepressure monitoring and ignitionsystem security, as well as inconnection with conveniences suchas Remote Keyless Entry (RKE)transmitters for remote door locking/unlocking and starting, andin-vehicle transmitters for garagedoor openers. RFID technology inGM vehicles does not use or recordpersonal information or link with anyother GM system containingpersonal information.

Radio FrequencyStatementThis vehicle has systems thatoperate on a radio frequency thatcomply with Part 15 of the FederalCommunications Commission (FCC)rules and with Industry CanadaStandards RSS‐GEN/210/220/310.

Operation is subject to the followingtwo conditions:

1. The device may not causeharmful interference.

2. The device must accept anyinterference received, includinginterference that may causeundesired operation of thedevice.

Changes or modifications to any ofthese systems by other than anauthorized service facility could voidauthorization to use this equipment.



2 NOTES


OnStar 14-1

OnStar

OnStar OverviewOnStar Overview . . . . . . . . . . . . 14-1

OnStar ServicesEmergency . . . . . . . . . . . . . . . . . . 14-2Security . . . . . . . . . . . . . . . . . . . . . . 14-2Navigation . . . . . . . . . . . . . . . . . . . 14-2Connections . . . . . . . . . . . . . . . . . 14-3Vehicle Diagnostics . . . . . . . . . . 14-5

OnStar Additional InformationOnStar AdditionalInformation . . . . . . . . . . . . . . . . . 14-5

OnStar Overview

If equipped, this vehicle has acomprehensive, in-vehicle systemthat can connect to a live Advisorfor Emergency, Security, Navigation,Connection, and DiagnosticServices.

The OnStar system status light isnext to the OnStar buttons. If thestatus light is:. Solid Green: System is ready.. Flashing Green: On a call.. Red: Indicates a problem.

PressQ or call 1-888-4-ONSTAR(1-888-466-7827) to speak to anAdvisor.

Press= to:

. Make a call, end a call,or answer an incoming call.

. Give OnStar Hands-Free Callingvoice commands.

. Give OnStar Turn-by-TurnNavigation voice commands.Requires the available Directionsand Connections service plan.

PressQ to connect to a liveAdvisor to:. Verify account information or

update contact information.. Get driving directions. Requires

the available Directions andConnections service plan.

. Receive On-DemandDiagnostics for a check of thevehicle’s key operating systems.

. Receive Roadside Assistance.

Press the OnStar Emergency button> to get a priority connection to anEmergency Advisor available24/7 to:


14-2 OnStar

. Get help for an emergency.

. Be a Good Samaritan orrespond to an AMBER Alert.

. Get assistance in severeweather or other crisis andevacuation routes.

OnStar Services

EmergencyWith Automatic Crash Response,the built-in system can automaticallyconnect to help in most crashes,even if help cannot be requested.

Press> to connect to anEmergency Advisor. GPStechnology is used to identify thevehicle location and can providecritical information to emergencypersonnel. The Advisor is alsotrained to offer critical assistance inemergency situations.

SecurityOnStar provides services like StolenVehicle Assistance, Remote IgnitionBlock, and Roadside Assistance,if equipped. OnStar can unlock thevehicle doors remotely, if equippedwith automatic door locks, and canhelp police locate the vehicle if it isstolen.

NavigationOnStar navigation requires theDirections and Connectionsservice plan.

PressQ to receive directions orhave them sent to the vehiclenavigation screen, if equipped.Destinations can also be forwardedto the vehicle from MapQuest.com.The OnStar mapping database iscontinuously updated. For coveragemaps, see www.onstar.com (U.S.)or www.onstar.ca (Canada).

Turn-by-Turn Navigation

1. PressQ to connect to a liveAdvisor.

2. Request directions.

3. Directions are downloaded to thevehicle.

4. Follow the voice-guidedcommands.


OnStar 14-3

Using Voice CommandsDuring a Planned Route

Cancel Route

1. Press=. System responds:“OnStar ready,” then a tone. Say“Cancel route.” Systemresponds: “Do you want tocancel directions?”

2. Say “Yes.” System responds:“OK, request completed, thankyou, goodbye.”

Route Preview

1. Press=. System responds:“OnStar ready,” then a tone.

2. Say “Route preview.” Systemresponds with the next threemaneuvers.

Repeat


2. Say “Repeat.” System respondswith the last direction given, thenresponds with “OnStar ready,”then a tone.

Get My Destination


2. Say “Get my destination.”System responds with theaddress and the distance to thedestination, then responds with“OnStar ready,” then a tone.

Other Navigation ServicesAvailable from OnStar

OnStar eNav: Allows subscribersto send destinations fromMapQuest.com to their Turn-by-TurnNavigation or screen-basednavigation system. When ready, thedirections will be downloaded to thevehicle.

Destination Download: PressQ,then request the Advisor todownload directions to thenavigation system in the vehicle.

After the call ends, press the “Go”button on the navigation screen tobegin driving directions.

If directions are downloaded to thenavigation system, the route canonly be canceled through thenavigation system.

Destinations can also bedownloaded on the go. Forinformation about eNav, DestinationDownload, and coverage maps seewww.onstar.com (U.S.) orwww.onstar.ca (Canada).

ConnectionsOnStar Hands-Free Calling allowscalls to be made and received fromthe vehicle. The vehicle can also becontrolled through the OnStarRemoteLink® mobile app. Forcoverage maps, seewww.onstar.com (U.S.) orwww.onstar.ca (Canada).


14-4 OnStar

OnStar Mobile App

Download the OnStar RemoteLinkmobile app to select Apple®,Android™, and BlackBerry® devicesto check vehicle fuel level, oil life,or tire pressure; to start the vehicle(if equipped) or unlock it; or toconnect to an OnStar Advisor. ForOnStar RemoteLink information andcompatibility, see www.onstar.com(U.S.) or www.onstar.ca (Canada).

Hands-Free Calling

1. Press=. System responds:“OnStar ready.”

2. Say “Call.” System responds:“Please say the name or numberto call.”

3. Say the entire number withoutpausing, including a “1” and thearea code. System responds:“OK calling.”

Calling 911 Emergency

1. Press=. System responds:“OnStar ready,” followed bya tone.

2. Say “Call.” System responds:“Please say the name or numberto call.”

3. Say “911” without pausing.System responds: “911.”

4. Say “Call.” System responds:“OK, dialing 911.”

Retrieve My Number


2. Say “My number.” Systemresponds: “Your OnStarHands-Free Calling number is,”then says the number.

End a Call

Press=. System responds: “Callended.”

Store a Name Tag for SpeedDialing


2. Say “Store.” System responds:“Please say the number youwould like to store.”

3. Say the entire number withoutpausing. System responds:“Please say the name tag.”

4. Pick a name tag. Systemresponds: “About to store <nametag>. Does that sound OK?”

5. Say “Yes” or say “No” to tryagain. System responds: “OK,storing <name tag>.”

Place a Call Using a StoredNumber


2. Say “Call <name tag>.” Systemresponds: “OK, calling<name tag>.”


OnStar 14-5

Verify Minutes and Expiration

Press= and say “Minutes” then“Verify” to check how many minutesremain and their expiration date.

Vehicle DiagnosticsOnStar Vehicle Diagnostics willperform a vehicle check everymonth. It will check the engine,transmission, antilock brakes, andmajor vehicle systems. It alsochecks the tire pressures, if thevehicle is equipped with the TirePressure Monitoring System. If anOn-Demand Diagnostics check isneeded between e-mails, pressQ,and an Advisor can run a check.

OnStar AdditionalInformationTransferring Service

PressQ to request account transfereligibility information. The Advisorcan assist in canceling or removingaccount information. If OnStarreceives information that vehicleownership has changed, OnStarmay send a voice message to thevehicle, requesting updated accountinformation.

Reactivation for SubsequentOwners

PressQ and follow the prompts tospeak to an Advisor as soon aspossible after acquiring the vehicle.The Advisor will update vehiclerecords and will explain the OnStarservice offers and options available.

How OnStar Service Works

Automatic Crash Response,Emergency Services, Crisis Assist,Stolen Vehicle Assistance, VehicleDiagnostics, Remote Door Unlock,Roadside Assistance, Turn-by-TurnNavigation, and Hands-Free Callingare available on most vehicles. Notall OnStar services are availableeverywhere or on all vehicles. Formore information, a full descriptionof OnStar services, systemlimitations, and OnStar terms andconditions:. Call 888-4-ONSTAR

(888-466-7827).. See www.onstar.com (U.S.).. See www.onstar.ca (Canada).. Call TTY 1-877-248-2080.

. PressQ to speak with anAdvisor.

OnStar services require a vehicleelectrical system, wireless service,and GPS satellite technologies to beavailable and operating for features


14-6 OnStar

to function properly. These systemsmay not operate if the battery isdischarged or disconnected.

OnStar service cannot work unlessyour vehicle is in a place whereOnStar has an agreement with awireless service provider for servicein that area, and the wirelessservice provider has coverage,network capacity, reception, andtechnology compatible with OnStarservice. Service involving locationinformation about the vehicle cannotwork unless GPS signals areavailable, unobstructed, andcompatible with the OnStarhardware. OnStar service may notwork if the OnStar equipment is notproperly installed or it has not beenproperly maintained. If equipment orsoftware is added, connected,or modified, OnStar service may notwork. Other problems beyond thecontrol of OnStar may preventservice such as hills, tall buildings,tunnels, weather, electrical systemdesign and architecture of the

vehicle, damage to the vehicle in acrash, or wireless phone networkcongestion or jamming.


Services for People withDisabilities

Advisors provide services to helpsubscribers with physical disabilitiesand medical conditions.

PressQ for help with:

. Locating a gas station with anattendant to pump gas.

. Finding a hotel, restaurant, etc.,that meets accessibility needs.

. Providing directions to theclosest hospital or pharmacy inurgent situations.

TTY Users

OnStar has the ability tocommunicate to the deaf,hard-of-hearing, or speech-impairedcustomers while in the vehicle. Theavailable dealer-installed TTY

system can provide in-vehicleaccess to all of the OnStar services,except Virtual Advisor and OnStarTurn-by-Turn Navigation.

OnStar.com (U.S.) or OnStar.ca(Canada)

The website provides access toaccount information, allowsmanagement of the OnStarsubscription, and viewing of videosof each service. Get subscriptionplan pricing and sign up for OnStarVehicle Diagnostics. Click on the“My Account” tab on the homepage. The website navigation andservices provided may vary bycountry.

OnStar Personal IdentificationNumber (PIN)

A PIN is needed to access some ofthe OnStar services, like RemoteDoor Unlock and Stolen VehicleAssistance. You will be prompted tochange the PIN the first time whenspeaking with an Advisor. To


OnStar 14-7

change the OnStar PIN, call OnStarand provide the Advisor with thecurrent number.

Warranty

OnStar equipment may bewarranted as part of the NewVehicle Limited Warranty. Themanufacturer of the vehiclefurnishes detailed warrantyinformation.

Languages

The vehicle can be programmed torespond in multiple languages.PressQ and ask an Advisor.Advisors are available in English,Spanish and French. Availablelanguages may vary by country.

Potential Issues

OnStar cannot perform RemoteDoor Unlock or Stolen VehicleAssistance after the vehicle hasbeen off continuously for five days.After five days, OnStar can contact

Roadside Assistance and alocksmith to help gain access to thevehicle.

Global PositioningSystem (GPS). Obstruction of the GPS can

occur in a large city with tallbuildings; in parking garages;around airports; in tunnels,underpasses, or parkinggarages; or in an area with verydense trees. If GPS signals arenot available, the OnStar systemshould still operate to callOnStar. However, OnStar couldhave difficulty identifying theexact location.

. In emergency situations, OnStarcan use the last stored GPSlocation to send to emergencyresponders.

. A temporary loss of GPS cancause loss of the ability to senda Turn-by-Turn Navigation route.The Advisor may give a verbal

route or may ask for a call backafter the vehicle is driven into anopen area.

Cellular and GPS Antennas

Avoid placing items over or near theantenna to prevent blocking cellularand GPS signal reception. Cellularreception is required for OnStar tosend remote signals to the vehicle.

Unable to Connect to OnStarMessage

If there is limited cellular coverageor the cellular network has reachedmaximum capacity, this messagemay come on. PressQ to try thecall again or try again after driving afew miles into another cellular area.

Vehicle and Power Issues

OnStar services require a vehicleelectrical system, wireless service,and GPS satellite technologies to beavailable and operating for featuresto function properly. These systemsmay not operate if the battery isdischarged or disconnected.


14-8 OnStar

Add-on Electrical Equipment

The OnStar system is integratedinto the electrical architecture of thevehicle. Do not add any electricalequipment. See Add-On ElectricalEquipment on page 9-65. Addedelectrical equipment may interferewith the operation of the OnStarsystem and cause it to not operate.

Privacy

The complete OnStar PrivacyStatement may be found atwww.onstar.com (U.S.),or www.onstar.ca (Canada).Privacy-sensitive users of wirelesscommunications are cautioned thatthe privacy of any information sentvia wireless cellular communicationscannot be assured. Third partiesmay unlawfully intercept or accesstransmissions and privatecommunications without consent.

OnStar - libcurl and unzipacknowledgments

Certain OnStar components includelibcurl and unzip software. Beloware the notices and licensesassociated with this software:

libcurl:

COPYRIGHT AND PERMISSIONNOTICE

Copyright (c) 1996 - 2010, DanielStenberg, <[email protected]>.

All rights reserved.

Permission to use, copy, modify,and distribute this software for anypurpose with or without fee ishereby granted, provided that theabove copyright notice and thispermission notice appear in allcopies.

THE SOFTWARE IS PROVIDED“AS IS,” WITHOUT WARRANTY OFANY KIND, EXPRESS ORIMPLIED, INCLUDING BUT NOTLIMITED TO THE WARRANTIESOF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSEAND NONINFRINGEMENT OFTHIRD PARTY RIGHTS. IN NOEVENT SHALL THE AUTHORS ORCOPYRIGHT HOLDERS BELIABLE FOR ANY CLAIM,DAMAGES OR OTHER LIABILITY,WHETHER IN AN ACTION OFCONTRACT, TORT OROTHERWISE, ARISING FROM,OUT OF OR IN CONNECTIONWITH THE SOFTWARE OR THEUSE OR OTHER DEALINGS INTHE SOFTWARE.

Except as contained in this notice,the name of a copyright holder shallnot be used in advertising orotherwise to promote the sale, useor other dealings in this Softwarewithout prior written authorization ofthe copyright holder.

unzip:

This is version 2005-Feb-10 of theInfo-ZIP copyright and license. Thedefinitive version of this document


OnStar 14-9

should be available at ftp://ftp.info-zip.org/pub/infozip/license.html indefinitely.

Copyright (c) 1990-2005 Info-ZIP. Allrights reserved.

For the purposes of this copyrightand license, “Info-ZIP” is defined asthe following set of individuals:

Mark Adler, John Bush, Karl Davis,Harald Denker, Jean-Michel Dubois,Jean-loup Gailly, Hunter Goatley, EdGordon, Ian Gorman, ChrisHerborth, Dirk Haase, Greg Hartwig,Robert Heath, Jonathan Hudson,Paul Kienitz, David Kirschbaum,Johnny Lee, Onno van der Linden,Igor Mandrichenko, Steve P. Miller,Sergio Monesi, Keith Owens,George Petrov, Greg Roelofs, KaiUwe Rommel, Steve Salisbury,Dave Smith, Steven M. Schweda,Christian Spieler, Cosmin Truta,Antoine Verheijen, Paul von Behren,Rich Wales, Mike White

This software is provided “as is,”without warranty of any kind,express or implied. In no event shallInfo-ZIP or its contributors be heldliable for any direct, indirect,incidental, special or consequentialdamages arising out of the use of orinability to use this software.

Permission is granted to anyone touse this software for any purpose,including commercial applications,and to alter it and redistribute itfreely, subject to the followingrestrictions:

1. Redistributions of source codemust retain the above copyrightnotice, definition, disclaimer, andthis list of conditions.

2. Redistributions in binary form(compiled executables) mustreproduce the above copyrightnotice, definition, disclaimer, andthis list of conditions indocumentation and/or othermaterials provided with thedistribution. The sole exceptionto this condition is redistributionof a standard UnZipSFX binary(including SFXWiz) as part of aself-extracting archive; that ispermitted without inclusion ofthis license, as long as thenormal SFX banner has notbeen removed from the binary ordisabled.


14-10 OnStar

3. Altered versions–including, butnot limited to, ports to newoperating systems, existing portswith new graphical interfaces,and dynamic, shared, or staticlibrary versions–must be plainlymarked as such and must not bemisrepresented as being theoriginal source. Such alteredversions also must not bemisrepresented as beingInfo-ZIP releases–including, butnot limited to, labeling of thealtered versions with the names“Info-ZIP” (or any variationthereof, including, but not limited

to, different capitalizations),“Pocket UnZip,” “WiZ” or“MacZip” without the explicitpermission of Info-ZIP. Suchaltered versions are furtherprohibited frommisrepresentative use of theZip-Bugs or Info-ZIP e-mailaddresses or of theInfo-ZIP URL(s).

4. Info-ZIP retains the right to usethe names “Info-ZIP,” “Zip,”“UnZip,” “UnZipSFX,” “WiZ,”“Pocket UnZip,” “Pocket Zip,”and “MacZip” for its own sourceand binary releases.


INDEX i-1

AAccessories andModifications . . . . . . . . . . . . . . . . . 10-3

Accessory Power . . . . . . . . . . . . . . 9-24Active EmergencyBraking System . . . . . . . . 1-17, 9-54

Adaptive Cruise Control . . . . . . . 9-41Add-On ElectricalEquipment . . . . . . . . . . . . . . . . . . . 9-65

Additional InformationOnStar® . . . . . . . . . . . . . . . . . . . . . .14-5

AdjustmentsLumbar, Front Seats . . . . . . . . . . . 3-4

Air Cleaner/Filter, Engine . . . . . 10-16Air Filter, PassengerCompartment . . . . . . . . . . . . . . . . . 8-6

Air Intake . . . . . . . . . . . . . . . . . . . . . . . 8-6Air Vents . . . . . . . . . . . . . . . . . . . . . . . 8-6Airbag SystemCheck . . . . . . . . . . . . . . . . . . . . . . . .3-30How Does an AirbagRestrain? . . . . . . . . . . . . . . . . . . .3-23

Passenger SensingSystem . . . . . . . . . . . . . . . . . . . . . .3-24

What Makes an AirbagInflate? . . . . . . . . . . . . . . . . . . . . . .3-22

Airbag System (cont'd)What Will You See after anAirbag Inflates? . . . . . . . . . . . . .3-23

When Should an AirbagInflate? . . . . . . . . . . . . . . . . . . . . . .3-22

Where Are the Airbags? . . . . . .3-20AirbagsAdding Equipment to theVehicle . . . . . . . . . . . . . . . . . . . . . .3-29

Passenger Status Indicator . . .5-20Readiness Light . . . . . . . . . . . . . .5-20Servicing Airbag-EquippedVehicles . . . . . . . . . . . . . . . . . . . . .3-29

System Check . . . . . . . . . . . . . . . .3-19AlarmVehicle Security . . . . . . . . . . . . . .2-16

AlertLane Change . . . . . . . . . . . . . . . . .9-56Side Blind Zone (SBZA) . . . . . .9-55

All-Wheel Drive . . . . . . . . . 9-32, 10-28Antilock BrakeSystem (ABS) . . . . . . . . . . . . . . . . 9-32Warning Light . . . . . . . . . . . . . . . . .5-25

Appearance CareExterior . . . . . . . . . . . . . . . . . . . . . 10-86Interior . . . . . . . . . . . . . . . . . . . . . . 10-90

Ashtrays . . . . . . . . . . . . . . . . . . . . . . . . 5-7

Assistance Program,Roadside . . . . . . . . . . . . . . . . . . . . . 13-5

Assistance Systems forDriving . . . . . . . . . . . . . . . . . . . . . . . 9-52

Assistance Systems forParking and Backing . . . . . . . . . 9-49

AutomaticDoor Locks . . . . . . . . . . . . . . . . . . .2-12Headlamp System . . . . . . . . . . . . . 6-2Transmission . . . . . . . . . . . . . . . . .9-27Transmission Fluid . . . . . . . . . 10-15

Automatic TransmissionManual Mode . . . . . . . . . . . . . . . . .9-29Shift Lock ControlFunction Check . . . . . . . . . . . 10-28

BBattery . . . . . . . . . . . . . . . . . . . . . . . 10-27Jump Starting . . . . . . . . 10-77, 10-79Power Protection . . . . . . . . . . . . . . 6-6Voltage and ChargingMessages . . . . . . . . . . . . . . . . . . .5-39

Blade Replacement, Wiper . . . 10-29


i-2 INDEX

BrakeSystem Warning Light . . . . . . . .5-24

Brakes . . . . . . . . . . . . . . . . . . . . . . . . 10-24Antilock . . . . . . . . . . . . . . . . . . . . . . .9-32Assist . . . . . . . . . . . . . . . . . . . . . . . . .9-35Fluid . . . . . . . . . . . . . . . . . . . . . . . . 10-25Parking . . . . . . . . . . . . . . . . . . . . . . .9-33System Messages . . . . . . . . . . . .5-39

Braking . . . . . . . . . . . . . . . . . . . . . . . . . 9-3Braking SystemActive Emergency . . . . . . . . . . . .1-17

Break-In, New Vehicle . . . . . . . . . 9-15Bulb Replacement . . . . . . . . . . . . 10-34Fog Lamps . . . . . . . . . . . . .6-4, 10-32Halogen Bulbs . . . . . . . . . . . . . . 10-31Headlamp Aiming . . . . . . . . . . . 10-30Headlamps . . . . . . . . . . . . . . . . . 10-31Headlamps, Front TurnSignal, and ParkingLamps . . . . . . . . . . . . . . . . . . . . 10-31

High Intensity Discharge(HID) Lighting . . . . . . . . . . . . . 10-31

License Plate Lamps . . . . . . . 10-33Taillamps, Turn Signal,Stoplamps, andBack-up Lamps . . . . . . . . . . . 10-33

Buying New Tires . . . . . . . . . . . . . 10-57

CCalibration . . . . . . . . . . . . . . . . . . . . . . 5-4CaliforniaFuel Requirements . . . . . . . . . . .9-61Perchlorate MaterialsRequirements . . . . . . . . . . . . . . .10-3

Warning . . . . . . . . . . . . . . . . . . . . . .10-2Canadian Vehicle Owners . . . . . . . . iiiCapacities andSpecifications . . . . . . . . . . . . . . . . 12-2

Carbon MonoxideEngine Exhaust . . . . . . . . . . . . . . .9-26Trunk . . . . . . . . . . . . . . . . . . . . . . . . .2-14Winter Driving . . . . . . . . . . . . . . . . . 9-8

Cargo Net . . . . . . . . . . . . . . . . . . . . . . 4-3Cautions, Danger, andWarnings . . . . . . . . . . . . . . . . . . . . . . . . iv

Center Console Storage . . . . . . . . 4-3Chains, Tire . . . . . . . . . . . . . . . . . . 10-62Charging System Light . . . . . . . . 5-21CheckEngine Light . . . . . . . . . . . . . . . . . .5-21IgnitionTransmission Lock . . . . . . . . 10-29

Child RestraintsInfants and YoungChildren . . . . . . . . . . . . . . . . . . . . .3-33

Lower Anchors andTethers for Children . . . . . . . . .3-38

Older Children . . . . . . . . . . . . . . . .3-31Securing . . . . . . . . . . . . . . . .3-46, 3-48Systems . . . . . . . . . . . . . . . . . . . . . .3-35

Cigarette Lighter . . . . . . . . . . . . . . . . 5-6Circuit Breakers . . . . . . . . . . . . . . 10-35CleaningExterior Care . . . . . . . . . . . . . . . 10-86Interior Care . . . . . . . . . . . . . . . . 10-90

Climate Control SystemsDual Automatic . . . . . . . . . . . . . . . . 8-1

Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Cluster, Instrument . . . . . . . 5-9, 5-13Clutch, Hydraulic . . . . . . . . . . . . . 10-15Collision Damage Repair . . . . . . 13-9Compact Spare Tire . . . . . . . . . . 10-76CompartmentsStorage . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Compass . . . . . . . . . . . . . . . . . . . . . . . 5-4Messages . . . . . . . . . . . . . . . . . . . .5-40

Compressor Kit, TireSealant . . . . . . . . . . . . . . . . . . . . . . 10-64


INDEX i-3

ConnectionsOnStar® . . . . . . . . . . . . . . . . . . . . . .14-3

ControlTraction and ElectronicStability . . . . . . . . . . . . . . . . . . . . .9-36

Control of a Vehicle . . . . . . . . . . . . . 9-3Convenience Net . . . . . . . . . . . . . . . 4-4Convex Mirrors . . . . . . . . . . . . . . . . 2-19CoolantEngine . . . . . . . . . . . . . . . . . . . . . . 10-19Engine TemperatureGauge . . . . . . . . . . . . . . . . . . . . . .5-18

Engine TemperatureWarning Light . . . . . . . . . . . . . . .5-28

Cooling System . . . . . . . . . . . . . . . 10-17Engine Messages . . . . . . . . . . . .5-41

Courtesy TransportationProgram . . . . . . . . . . . . . . . . . . . . . . 13-7

Cruise Control . . . . . . . . . . . . . . . . . 9-39Light . . . . . . . . . . . . . . . . . . . . . . . . . .5-31Messages . . . . . . . . . . . . . . . . . . . .5-40

Cruise Control, Active . . . . . . . . . 9-41Cupholders . . . . . . . . . . . . . . . . . . . . . 4-2

Customer Assistance . . . . . . . . . . 13-4Offices . . . . . . . . . . . . . . . . . . . . . . . .13-3Text Telephone (TTY)Users . . . . . . . . . . . . . . . . . . . . . . .13-4

Customer InformationService PublicationsOrdering Information . . . . . . .13-11

Customer SatisfactionProcedure . . . . . . . . . . . . . . . . . . . . 13-1

DDamage Repair, Collision . . . . . . 13-9Danger, Warnings, andCautions . . . . . . . . . . . . . . . . . . . . . . . . iv

Data Recorders, Event . . . . . . . 13-14Daytime RunningLamps (DRL) . . . . . . . . . . . . . . . . . . 6-2

Defensive Driving . . . . . . . . . . . . . . . 9-3Delayed Locking . . . . . . . . . . . . . . . 2-12Distracted Driving . . . . . . . . . . . . . . . 9-2Dome Lamps . . . . . . . . . . . . . . . . . . . 6-5

DoorAjar Light . . . . . . . . . . . . . . . . . . . . .5-31Ajar Messages . . . . . . . . . . . . . . .5-41Delayed Locking . . . . . . . . . . . . . .2-12Locks . . . . . . . . . . . . . . . . . . . . . . . . . 2-11Power Locks . . . . . . . . . . . . . . . . . .2-12

Drive Belt Routing, Engine . . . . . 12-4Drive SystemsAll-Wheel Drive . . . . . . . 9-32, 10-28

Driver Assistance Systems . . . . 9-49Driver InformationCenter (DIC) . . . . . . . . . . . 5-33, 5-35

DrivingAssistance Systems . . . . . . . . . .9-52Defensive . . . . . . . . . . . . . . . . . . . . . . 9-3Drunk . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3For Better Fuel Economy . . . . .1-23Highway Hypnosis . . . . . . . . . . . . . 9-7Hill and Mountain Roads . . . . . . . 9-7If the Vehicle is Stuck . . . . . . . . .9-10Loss of Control . . . . . . . . . . . . . . . . 9-5Off-Road Recovery . . . . . . . . . . . . 9-5Vehicle Load Limits . . . . . . . . . . .9-10Wet Roads . . . . . . . . . . . . . . . . . . . . 9-6Winter . . . . . . . . . . . . . . . . . . . . . . . . . 9-8


i-4 INDEX

Dual Automatic ClimateControl System . . . . . . . . . . . . . . . . 8-1

EE85 or FlexFuel . . . . . . . . . . . . . . . 9-62Electric Parking Brake Light . . . 5-24Electrical Equipment,Add-On . . . . . . . . . . . . . . . . . . . . . . 9-65

Electrical SystemEngine CompartmentFuse Block . . . . . . . . . . . . . . . . 10-36


Instrument Panel FuseBlock . . . . . . . . . . . . . . . . . . . . . . 10-39

Overload . . . . . . . . . . . . . . . . . . . 10-35EmergencyOnStar® . . . . . . . . . . . . . . . . . . . . . .14-2

Energy Information . . . . . . . . . . . . 5-33EngineAir Cleaner/Filter . . . . . . . . . . . 10-16Check and Service EngineSoon Light . . . . . . . . . . . . . . . . . .5-21

Compartment Overview . . . . . . .10-6Coolant . . . . . . . . . . . . . . . . . . . . . 10-19

Engine (cont'd)Coolant TemperatureGauge . . . . . . . . . . . . . . . . . . . . . .5-18

Coolant TemperatureWarning Light . . . . . . . . . . . . . . .5-28

Cooling System . . . . . . . . . . . . . 10-17Cooling System Messages . . .5-41Drive Belt Routing . . . . . . . . . . . .12-4Exhaust . . . . . . . . . . . . . . . . . . . . . .9-26Heater . . . . . . . . . . . . . . . . . . . . . . . .9-23Oil Life System . . . . . . . . . . . . . 10-13Oil Messages . . . . . . . . . . . . . . . . .5-42Overheating . . . . . . . . . . . . . . . . 10-22Power Messages . . . . . . . . . . . . .5-42Pressure Light . . . . . . . . . . . . . . . .5-29Running While Parked . . . . . . . .9-26Starting . . . . . . . . . . . . . . . . . . . . . . .9-18

Entry Lighting . . . . . . . . . . . . . . . . . . . 6-6Event Data Recorders . . . . . . . . 13-14Exit Lighting . . . . . . . . . . . . . . . . . . . . 6-6Extender, Safety Belt . . . . . . . . . . 3-17Exterior Lamp Controls . . . . . . . . . 6-1Exterior Lamps Off Reminder . . . 6-1

FFeaturesMemory . . . . . . . . . . . . . . . . . . . . . . . . 1-9

Filter,Engine Air Cleaner . . . . . . . . . 10-16

Flash-to-Pass . . . . . . . . . . . . . . . . . . . 6-2Flashers, Hazard Warning . . . . . . 6-3Flat Tire . . . . . . . . . . . . . . . . . . . . . . 10-62Changing . . . . . . . . . . . . . . . . . . . 10-71

FlexFuelE85 . . . . . . . . . . . . . . . . . . . . . . . . . . .9-62

Floor Mats . . . . . . . . . . . . . . . . . . . . 10-94FluidAutomatic Transmission . . . . 10-15Brakes . . . . . . . . . . . . . . . . . . . . . . 10-25Washer . . . . . . . . . . . . . . . . . . . . . 10-23

Fog LampsBulb Replacement . . . . . .6-4, 10-32

Folding Mirrors . . . . . . . . . . . . . . . . 2-19Forward Collision Alert(FCA) System . . . . . . . . . . . . . . . . 9-52

Front Fog LampLight . . . . . . . . . . . . . . . . . . . . . . . . . .5-30

Front SeatsAdjustment . . . . . . . . . . . . . . . . . . . . 3-3Heated . . . . . . . . . . . . . . . . . . . . . . . . 3-8


INDEX i-5

Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-60Additives . . . . . . . . . . . . . . . . . . . . .9-62Economy Driving . . . . . . . . . . . . .1-23Filling a Portable FuelContainer . . . . . . . . . . . . . . . . . . .9-64

Filling the Tank . . . . . . . . . . . . . . .9-63Foreign Countries . . . . . . . . . . . .9-61Gasoline Specifications . . . . . . .9-61Gauge . . . . . . . . . . . . . . . . . . . . . . . .5-17Low Fuel Warning Light . . . . . . .5-29Recommended . . . . . . . . . . . . . . .9-60Requirements, California . . . . .9-61System Messages . . . . . . . . . . . .5-42

FusesEngine CompartmentFuse Block . . . . . . . . . . . . . . . . 10-36


Instrument Panel FuseBlock . . . . . . . . . . . . . . . . . . . . . . 10-39

GGarage Door Opener . . . . . . . . . . 5-54Programming . . . . . . . . . . . . . . . . .5-54

GasolineSpecifications . . . . . . . . . . . . . . . . .9-61

GaugesEngine CoolantTemperature . . . . . . . . . . . . . . . .5-18

Fuel . . . . . . . . . . . . . . . . . . . . . . . . . .5-17Odometer . . . . . . . . . . . . . . . . . . . . .5-16Speedometer . . . . . . . . . . . . . . . . .5-16Tachometer . . . . . . . . . . . . . . . . . . .5-16Trip Odometer . . . . . . . . . . . . . . . .5-16Warning Lights andIndicators . . . . . . . . . . . . . . . . . . . . 5-7

General InformationService and Maintenance . . . . . 11-1Towing . . . . . . . . . . . . . . . . . . . . . . . .9-65Vehicle Care . . . . . . . . . . . . . . . . . .10-2

Glove Box . . . . . . . . . . . . . . . . . . . . . . 4-1GM Mobility ReimbursementProgram . . . . . . . . . . . . . . . . . . . . . . 13-5

HHalogen Bulbs . . . . . . . . . . . . . . . . 10-31Hazard Warning Flashers . . . . . . . 6-3Head Restraints . . . . . . . . . . . . . . . . 3-2HeadlampsAiming . . . . . . . . . . . . . . . . . . . . . . 10-30Automatic . . . . . . . . . . . . . . . . . . . . . . 6-2Bulb Replacement . . . . . . . . . . 10-31Daytime RunningLamps (DRL) . . . . . . . . . . . . . . . . . 6-2

Flash-to-Pass . . . . . . . . . . . . . . . . . . 6-2High Intensity Discharge(HID) Lighting . . . . . . . . . . . . . 10-31

High-Beam On Light . . . . . . . . . .5-30High/Low Beam Changer . . . . . . 6-1Lamps On Reminder . . . . . . . . .5-30

HeatedSteering Wheel . . . . . . . . . . . . . . . . 5-3

Heated Front Seats . . . . . . . . . . . . . 3-8Heated Mirrors . . . . . . . . . . . . . . . . . 2-20HeaterEngine . . . . . . . . . . . . . . . . . . . . . . . .9-23

High Voltage Devices andWiring . . . . . . . . . . . . . . . . . . . . . . . 10-34

High-Beam On Light . . . . . . . . . . . 5-30High-Speed Operation . . . . . . . . 10-50


i-6 INDEX

Highway Hypnosis . . . . . . . . . . . . . . 9-7Hill and Mountain Roads . . . . . . . . 9-7Hill Start Assist (HSA) . . . . . . . . . 9-35Hood . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3How to Wear Safety BeltsProperly . . . . . . . . . . . . . . . . . . . . . . 3-12

Hydraulic Clutch . . . . . . . . . . . . . . 10-15

IIgnition Positions . . . . . . . . 9-15, 9-17Ignition Transmission LockCheck . . . . . . . . . . . . . . . . . . . . . . . 10-29

Immobilizer . . . . . . . . . . . . . . . . . . . . 2-17IndicatorVehicle Ahead . . . . . . . . . . . . . . . .5-26

Infants and Young Children,Restraints . . . . . . . . . . . . . . . . . . . . 3-33

InformationEnergy . . . . . . . . . . . . . . . . . . . . . . .5-33

Infotainment . . . . . . . . . . . . . . . . . . . . 7-1Infotainment System . . . . . . . . . . 13-15Instrument Cluster . . . . . . . . 5-9, 5-13Instrument PanelStorage Area . . . . . . . . . . . . . . . . . . 4-1

Interior Rearview Mirrors . . . . . . . 2-20

Introduction . . . . . . . . . . . . . . . . . . . . . . . iii

JJump Starting . . . . . . . . . .10-77, 10-79

KKey and Lock Messages . . . . . . . 5-43Keyless EntryRemote (RKE) System . . . . . . . . 2-3

Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

LLabeling, Tire Sidewall . . . . . . . . 10-43LampsDaytime Running (DRL) . . . . . . . 6-2Dome . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5Exterior Controls . . . . . . . . . . . . . . . 6-1Exterior Lamps OffReminder . . . . . . . . . . . . . . . . . . . . 6-1

Headlamps, Front TurnSignal, and ParkingLamps . . . . . . . . . . . . . . . . . . . . 10-31

License Plate . . . . . . . . . . . . . . . 10-33

Lamps (cont'd)Malfunction Indicator . . . . . . . . .5-21On Reminder . . . . . . . . . . . . . . . . .5-30Reading . . . . . . . . . . . . . . . . . . . . . . . 6-5

Lane Change Alert . . . . . . . . . . . . 9-56Lane DepartureWarning (LDW) . . . . . . . . . . . . . . . 9-58

Lane Departure WarningLight . . . . . . . . . . . . . . . . . . . . . . . . . 5-26

Lap-Shoulder Belt . . . . . . . . . . . . . 3-12LATCH SystemReplacing Parts after aCrash . . . . . . . . . . . . . . . . . . . . . . .3-46

LATCH, Lower Anchors andTethers for Children . . . . . . . . . . 3-38

Lighter, Cigarette . . . . . . . . . . . . . . . 5-6LightingEntry . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6Illumination Control . . . . . . . . . . . . 6-4

LightsAirbag Readiness . . . . . . . . . . . . .5-20Antilock Brake System(ABS) Warning . . . . . . . . . . . . . .5-25

Brake System Warning . . . . . . .5-24Charging System . . . . . . . . . . . . .5-21Cruise Control . . . . . . . . . . . . . . . .5-31


INDEX i-7

Lights (cont'd)Door Ajar . . . . . . . . . . . . . . . . . . . . .5-31Electric Parking Brake . . . . . . . .5-24Engine CoolantTemperature Warning . . . . . . .5-28

Engine Oil Pressure . . . . . . . . . .5-29Flash-to-Pass . . . . . . . . . . . . . . . . . . 6-2Front Fog Lamp . . . . . . . . . . . . . .5-30High-Beam On . . . . . . . . . . . . . . . .5-30High/Low Beam Changer . . . . . . 6-1Lane Departure Warning . . . . . .5-26Low Fuel Warning . . . . . . . . . . . .5-29Safety Belt Reminders . . . . . . . .5-19Security . . . . . . . . . . . . . . . . . . . . . .5-30Service Electric ParkingBrake . . . . . . . . . . . . . . . . . . . . . . .5-25

StabiliTrak® OFF . . . . . . . . . . . . .5-27Tire Pressure . . . . . . . . . . . . . . . . .5-28Traction Control System(TCS)/StabiliTrak® . . . . . . . . . .5-27

Traction Off . . . . . . . . . . . . . . . . . . .5-27Up-Shift . . . . . . . . . . . . . . . . . . . . . .5-26

LocksAutomatic Door . . . . . . . . . . . . . . .2-12Delayed Locking . . . . . . . . . . . . . .2-12Door . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11

Locks (cont'd)Lockout Protection . . . . . . . . . . . .2-12Power Door . . . . . . . . . . . . . . . . . . .2-12Safety . . . . . . . . . . . . . . . . . . . . . . . .2-13

Loss of Control . . . . . . . . . . . . . . . . . 9-5Low Fuel Warning Light . . . . . . . . 5-29Lower Anchors and Tethersfor Children (LATCHSystem) . . . . . . . . . . . . . . . . . . . . . . 3-38

Lumbar Adjustment . . . . . . . . . . . . . 3-4Front Seats . . . . . . . . . . . . . . . . . . . . 3-4

MMaintenanceRecords . . . . . . . . . . . . . . . . . . . . .11-14

Maintenance ScheduleRecommended Fluidsand Lubricants . . . . . . . . . . . . .11-11

Malfunction Indicator Lamp . . . . 5-21Manual Mode . . . . . . . . . . . . . . . . . . 9-29Manual Transmission . . . . . . . . . . 9-30Fluid . . . . . . . . . . . . . . . . . . . . . . . . 10-15

Memory Features . . . . . . . . . . . . . . . 1-9Memory Seats . . . . . . . . . . . . . . . . . . 3-6

MessagesBattery Voltage andCharging . . . . . . . . . . . . . . . . . . . .5-39

Brake System . . . . . . . . . . . . . . . .5-39Compass . . . . . . . . . . . . . . . . . . . . .5-40Door Ajar . . . . . . . . . . . . . . . . . . . . .5-41Engine Cooling System . . . . . . .5-41Engine Oil . . . . . . . . . . . . . . . . . . . .5-42Engine Power . . . . . . . . . . . . . . . .5-42Fuel System . . . . . . . . . . . . . . . . . .5-42Key and Lock . . . . . . . . . . . . . . . . .5-43Object Detection System . . . . .5-43Ride Control System . . . . . . . . . .5-45Security . . . . . . . . . . . . . . . . . . . . . .5-46Starting the Vehicle . . . . . . . . . . .5-46Tire . . . . . . . . . . . . . . . . . . . . . . . . . . .5-46Transmission . . . . . . . . . . . . . . . . .5-47Vehicle . . . . . . . . . . . . . . . . . . . . . . .5-39Washer Fluid . . . . . . . . . . . . . . . . .5-47Window . . . . . . . . . . . . . . . . . . . . . . .5-47

MirrorsAutomatic DimmingRearview . . . . . . . . . . . . . . . . . . . .2-20

Convex . . . . . . . . . . . . . . . . . . . . . . .2-19Folding . . . . . . . . . . . . . . . . . . . . . . .2-19


i-8 INDEX

Mirrors (cont'd)Heated . . . . . . . . . . . . . . . . . . . . . . .2-20Power . . . . . . . . . . . . . . . . . . . . . . . .2-19Tilt in Reverse . . . . . . . . . . . . . . . .2-20

Mirrors, Interior Rearview . . . . . . 2-20Monitor System, TirePressure . . . . . . . . . . . . . . . . . . . . 10-50

NNavigationOnStar® . . . . . . . . . . . . . . . . . . . . . .14-2

NetCargo . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Net, Convenience . . . . . . . . . . . . . . 4-4New Vehicle Break-In . . . . . . . . . . 9-15

OObject Detection SystemMessages . . . . . . . . . . . . . . . . . . . . 5-43

Odometer . . . . . . . . . . . . . . . . . . . . . . 5-16Trip . . . . . . . . . . . . . . . . . . . . . . . . . . .5-16

Off-RoadRecovery . . . . . . . . . . . . . . . . . . . . . . 9-5

OilEngine . . . . . . . . . . . . . . . . . . . . . . .10-11Engine Oil Life System . . . . . 10-13Messages . . . . . . . . . . . . . . . . . . . .5-42Pressure Light . . . . . . . . . . . . . . . .5-29

Older Children, Restraints . . . . . 3-31Online Owner Center . . . . . . . . . . 13-4OnStar®

System, In Brief . . . . . . . . . . . . . .1-23OnStar® AdditionalInformation . . . . . . . . . . . . . . . . . . . 14-5

OnStar® Connections . . . . . . . . . . 14-3OnStar® Emergency . . . . . . . . . . . 14-2OnStar® Navigation . . . . . . . . . . . . 14-2OnStar® Overview . . . . . . . . . . . . . 14-1OnStar® Security . . . . . . . . . . . . . . 14-2OnStar® VehicleDiagnostics . . . . . . . . . . . . . . . . . . 14-5

OrderingService Publications . . . . . . . . .13-11

OutletsPower . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Overheating, Engine . . . . . . . . . . 10-22

PParkShifting Into . . . . . . . . . . . . . . . . . . .9-24Shifting Out of . . . . . . . . . . . . . . . .9-25

Parking . . . . . . . . . . . . . . . . . . . . . . . . 9-25Brake . . . . . . . . . . . . . . . . . . . . . . . . .9-33Brake and P (Park)Mechanism Check . . . . . . . . 10-29

Over Things That Burn . . . . . . .9-26Parking or BackingAssistance Systems . . . . . . . . . .9-49

Passenger Airbag StatusIndicator . . . . . . . . . . . . . . . . . . . . . 5-20

Passenger Compartment AirFilter . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6

Passenger Sensing System . . . 3-24Perchlorate MaterialsRequirements, California . . . . . 10-3

PersonalizationVehicle . . . . . . . . . . . . . . . . . . . . . . .5-48

PowerDoor Locks . . . . . . . . . . . . . . . . . . .2-12Flows . . . . . . . . . . . . . . . . . . . . . . . . .5-31Mirrors . . . . . . . . . . . . . . . . . . . . . . . .2-19Outlets . . . . . . . . . . . . . . . . . . . . . . . . 5-5Protection, Battery . . . . . . . . . . . . . 6-6


INDEX i-9

Power (cont'd)Retained Accessory (RAP) . . .9-24Seat Adjustment . . . . . . . . . . . . . . . 3-4Windows . . . . . . . . . . . . . . . . . . . . .2-21

Pregnancy, Using SafetyBelts . . . . . . . . . . . . . . . . . . . . . . . . . 3-17

PrivacyRadio FrequencyIdentification (RFID) . . . . . . . 13-15

ProgramCourtesy Transportation . . . . . .13-7

Proposition 65 Warning,California . . . . . . . . . . . . . . . . . . . . . 10-2

RRadio FrequencyIdentification (RFID) . . . . . . . . 13-15Statement . . . . . . . . . . . . . . . . . . 13-15

Reading Lamps . . . . . . . . . . . . . . . . . 6-5Rear Seats . . . . . . . . . . . . . . . . . . . . . 3-9Rear Storage . . . . . . . . . . . . . . . . . . . 4-3Rearview MirrorsAutomatic Dimming . . . . . . . . . . .2-20

Reclining Seatbacks . . . . . . . . . . . . 3-5RecommendedFuel . . . . . . . . . . . . . . . . . . . . . . . . . .9-60

Recommended Fluids andLubricants . . . . . . . . . . . . . . . . . . . 11-11

RecordsMaintenance . . . . . . . . . . . . . . . . .11-14

Recreational VehicleTowing . . . . . . . . . . . . . . . . . . . . . . 10-82

Reimbursement Program,GM Mobility . . . . . . . . . . . . . . . . . . 13-5

Remote Keyless Entry(RKE) System . . . . . . . . . . . . .2-2, 2-3

Remote Vehicle Start . . . . . . . . . . . 2-9Replacement Bulbs . . . . . . . . . . . 10-34Replacement PartsAirbags . . . . . . . . . . . . . . . . . . . . . . .3-30Maintenance . . . . . . . . . . . . . . . . .11-12

Replacing Airbag System . . . . . . 3-30Replacing LATCH SystemParts after a Crash . . . . . . . . . . . 3-46

Replacing Safety BeltSystem Parts after a Crash . . . 3-18

Reporting Safety DefectsCanadian Government . . . . . . 13-13General Motors . . . . . . . . . . . . . 13-13U.S. Government . . . . . . . . . . . 13-12

RestraintsWhere to Put . . . . . . . . . . . . . . . . .3-37

Retained AccessoryPower (RAP) . . . . . . . . . . . . . . . . . 9-24

Reverse Tilt Mirrors . . . . . . . . . . . . 2-20Ride Control SystemsMessages . . . . . . . . . . . . . . . . . . . .5-45Selective . . . . . . . . . . . . . . . . . . . . .9-38

RoadsDriving, Wet . . . . . . . . . . . . . . . . . . . 9-6

Roadside AssistanceProgram . . . . . . . . . . . . . . . . . . . . . . 13-5

RoofSunroof . . . . . . . . . . . . . . . . . . . . . . .2-23

Rotation, Tires . . . . . . . . . . . . . . . . 10-55Routing, Engine Drive Belt . . . . . 12-4Running the Vehicle WhileParked . . . . . . . . . . . . . . . . . . . . . . . 9-26

SSafety Belts . . . . . . . . . . . . . . . . . . . 3-10Care . . . . . . . . . . . . . . . . . . . . . . . . . .3-18Extender . . . . . . . . . . . . . . . . . . . . . .3-17How to Wear Safety BeltsProperly . . . . . . . . . . . . . . . . . . . . .3-12

Lap-Shoulder Belt . . . . . . . . . . . .3-12


i-10 INDEX

Safety Belts (cont'd)Reminders . . . . . . . . . . . . . . . . . . . .5-19Replacing after a Crash . . . . . .3-18Use During Pregnancy . . . . . . . .3-17

Safety Defects ReportingCanadian Government . . . . . . 13-13General Motors . . . . . . . . . . . . . 13-13U.S. Government . . . . . . . . . . . 13-12

Safety Locks . . . . . . . . . . . . . . . . . . . 2-13Safety System Check . . . . . . . . . . 3-18Scheduling Appointments . . . . . . 13-7Sealant Kit, Tire . . . . . . . . . . . . . . 10-64SeatsAdjustment, Front . . . . . . . . . . . . . . 3-3Head Restraints . . . . . . . . . . . . . . . 3-2Heated Front . . . . . . . . . . . . . . . . . . 3-8Lumbar Adjustment, Front . . . . . 3-4Memory . . . . . . . . . . . . . . . . . . . . . . . . 3-6Power Adjustment, Front . . . . . . 3-4Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9Reclining Seatbacks . . . . . . . . . . . 3-5

Securing ChildRestraints . . . . . . . . . . . . . . 3-46, 3-48

SecurityLight . . . . . . . . . . . . . . . . . . . . . . . . . .5-30Messages . . . . . . . . . . . . . . . . . . . .5-46OnStar® . . . . . . . . . . . . . . . . . . . . . .14-2Vehicle . . . . . . . . . . . . . . . . . . . . . . .2-16Vehicle Alarm . . . . . . . . . . . . . . . . .2-16

Selective Ride Control . . . . . . . . . 9-38Service . . . . . . . . . . . . . . . . . . . . . . . . . 8-6Accessories andModifications . . . . . . . . . . . . . . . .10-3

Doing Your Own Work . . . . . . . .10-3Engine Soon Light . . . . . . . . . . . .5-21Maintenance Records . . . . . . .11-14Maintenance, GeneralInformation . . . . . . . . . . . . . . . . . . 11-1

Parts Identification Label . . . . .12-1Publications OrderingInformation . . . . . . . . . . . . . . . . .13-11

Scheduling Appointments . . . . .13-7Service Electric ParkingBrake Light . . . . . . . . . . . . . . . . . . . 5-25

Servicing the Airbag . . . . . . . . . . . 3-29Shift Lock Control FunctionCheck, AutomaticTransmission . . . . . . . . . . . . . . . . 10-28

ShiftingInto Park . . . . . . . . . . . . . . . . . . . . . .9-24Out of Park . . . . . . . . . . . . . . . . . . .9-25

Side Blind ZoneAlert (SBZA) . . . . . . . . . . . . . . . . . 9-55

Signals, Turn andLane-Change . . . . . . . . . . . . . . . . . 6-3

Spare TireCompact . . . . . . . . . . . . . . . . . . . . 10-76

Specifications andCapacities . . . . . . . . . . . . . . . . . . . . 12-2

Speedometer . . . . . . . . . . . . . . . . . . 5-16StabiliTrakOFF Light . . . . . . . . . . . . . . . . . . . . .5-27

Start Assist, Hills . . . . . . . . . . . . . . 9-35Start Vehicle, Remote . . . . . . . . . . 2-9Starter Switch Check . . . . . . . . . 10-28Starting the Engine . . . . . . . . . . . . 9-18Starting the VehicleMessages . . . . . . . . . . . . . . . . . . . . 5-46

Steering . . . . . . . . . . . . . . . . . . . . . . . . 9-4Heated Wheel . . . . . . . . . . . . . . . . . 5-3Wheel Adjustment . . . . . . . . . . . . . 5-2Wheel Controls . . . . . . . . . . . . . . . . 5-2

Stoplamps and Back-up LampsBulb Replacement . . . . . . . . . . 10-33


INDEX i-11

StorageRear . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Storage AreasCenter Console . . . . . . . . . . . . . . . . 4-3Convenience Net . . . . . . . . . . . . . . 4-4Glove Box . . . . . . . . . . . . . . . . . . . . . 4-1Instrument Panel . . . . . . . . . . . . . . 4-1

Storage Compartments . . . . . . . . . 4-1Storing the Tire Sealantand Compressor Kit . . . . . . . . . 10-71

Stuck Vehicle . . . . . . . . . . . . . . . . . . 9-10Sun Visors . . . . . . . . . . . . . . . . . . . . . 2-22Sunroof . . . . . . . . . . . . . . . . . . . . . . . . 2-23Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . ivSystemActive Emergency Braking . . . .9-54Forward CollisionAlert (FCA) . . . . . . . . . . . . . . . . . .9-52

Infotainment . . . . . . . . . . . .7-1, 13-15SystemsDriver Assistance . . . . . . . . . . . . .9-49

TTachometer . . . . . . . . . . . . . . . . . . . . 5-16TaillampsBulb Replacement . . . . . . . . . . 10-33

Text Telephone (TTY) Users . . . 13-4Theft-DeterrentSystems . . . . . . . . . . . . . . . 2-17, 2-18Immobilizer . . . . . . . . . . . . . . . . . . .2-17

Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4TiresBuying New Tires . . . . . . . . . . . 10-57Chains . . . . . . . . . . . . . . . . . . . . . . 10-62Changing . . . . . . . . . . . . . . . . . . . 10-71Compact Spare . . . . . . . . . . . . . 10-76Designations . . . . . . . . . . . . . . . 10-45Different Size . . . . . . . . . . . . . . . 10-58If a Tire Goes Flat . . . . . . . . . . 10-62Inflation Monitor System . . . . 10-51Inspection . . . . . . . . . . . . . . . . . . 10-55Messages . . . . . . . . . . . . . . . . . . . .5-46Pressure . . . . . . . . . . . . . . . . . . . . 10-50Pressure Light . . . . . . . . . . . . . . . .5-28Pressure Monitor System . . . 10-50Rotation . . . . . . . . . . . . . . . . . . . . 10-55Sealant andCompressor Kit . . . . . . . . . . . 10-64

Tires (cont'd)Sealant and CompressorKit, Storing . . . . . . . . . . . . . . . . 10-71

Sidewall Labeling . . . . . . . . . . . 10-43Terminology andDefinitions . . . . . . . . . . . . . . . . . 10-46

Uniform Tire QualityGrading . . . . . . . . . . . . . . . . . . . 10-59

Wheel Alignment and TireBalance . . . . . . . . . . . . . . . . . . . 10-60

Wheel Replacement . . . . . . . . 10-61When It Is Time for NewTires . . . . . . . . . . . . . . . . . . . . . . 10-56

Winter . . . . . . . . . . . . . . . . . . . . . . 10-42TowingGeneral Information . . . . . . . . . .9-65Recreational Vehicle . . . . . . . . 10-82Vehicle . . . . . . . . . . . . . . . . . . . . . 10-82

Track Events andCompetitive Driving . . . . . . . . . . . 9-6

TractionControl System (TCS)/StabiliTrak® Light . . . . . . . . . . . .5-27

Off Light . . . . . . . . . . . . . . . . . . . . . .5-27Selective Ride Control . . . . . . . .9-38

Traction Control/ElectronicStability Control . . . . . . . . . . . . . . 9-36


i-12 INDEX

TransmissionAutomatic . . . . . . . . . . . . . . . . . . . . .9-27Fluid, Automatic . . . . . . . . . . . . 10-15Fluid, Manual . . . . . . . . . . . . . . . 10-15Messages . . . . . . . . . . . . . . . . . . . .5-47

Transportation Program,Courtesy . . . . . . . . . . . . . . . . . . . . . 13-7

Trip Odometer . . . . . . . . . . . . . . . . . 5-16Trunk . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14Turn and Lane-ChangeSignals . . . . . . . . . . . . . . . . . . . . . . . . 6-3

Turn SignalBulb Replacement . . . . . . . . . . 10-33

UUniform Tire QualityGrading . . . . . . . . . . . . . . . . . . . . . 10-59

Universal Remote System . . . . . 5-54Operation . . . . . . . . . . . . . . . . . . . . .5-56Programming . . . . . . . . . . . . . . . . .5-54

Up-Shift Light . . . . . . . . . . . . . . . . . . 5-26Using This Manual . . . . . . . . . . . . . . . . iii

VVehicleAlarm System . . . . . . . . . . . . . . . .2-16Canadian Owners . . . . . . . . . . . . . . . iiiControl . . . . . . . . . . . . . . . . . . . . . . . . 9-3IdentificationNumber (VIN) . . . . . . . . . . . . . . .12-1

Load Limits . . . . . . . . . . . . . . . . . . .9-10Messages . . . . . . . . . . . . . . . . . . . .5-39Personalization . . . . . . . . . . . . . . .5-48Remote Start . . . . . . . . . . . . . . . . . . 2-9Security . . . . . . . . . . . . . . . . . . . . . .2-16Towing . . . . . . . . . . . . . . . . . . . . . . 10-82

Vehicle Ahead Indicator . . . . . . . 5-26Vehicle CareStoring the Tire Sealantand Compressor Kit . . . . . . . 10-71

Tire Pressure . . . . . . . . . . . . . . . 10-48Vehicle DiagnosticsOnStar® . . . . . . . . . . . . . . . . . . . . . .14-5

Ventilation, Air . . . . . . . . . . . . . . . . . . 8-6Visors . . . . . . . . . . . . . . . . . . . . . . . . . 2-22Voltage Devices andWiring . . . . . . . . . . . . . . . . . . . . . . . 10-34

WWarningBrake System Light . . . . . . . . . . .5-24Lane Departure (LDW) . . . . . . .9-58

Warning Lights, Gauges, andIndicators . . . . . . . . . . . . . . . . . . . . . 5-7

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . ivCautions and Danger . . . . . . . . . . . .ivHazard Flashers . . . . . . . . . . . . . . . 6-3

Washer Fluid . . . . . . . . . . . . . . . . . 10-23Messages . . . . . . . . . . . . . . . . . . . .5-47

WheelsAlignment and TireBalance . . . . . . . . . . . . . . . . . . . 10-60

Different Size . . . . . . . . . . . . . . . 10-58Replacement . . . . . . . . . . . . . . . 10-61

When It Is Time for NewTires . . . . . . . . . . . . . . . . . . . . . . . . 10-56

Where to Put the Restraint . . . . 3-37Windows . . . . . . . . . . . . . . . . . . . . . . 2-20Messages . . . . . . . . . . . . . . . . . . . .5-47Power . . . . . . . . . . . . . . . . . . . . . . . .2-21

WindshieldWiper/Washer . . . . . . . . . . . . . . . . . 5-3

WinterDriving . . . . . . . . . . . . . . . . . . . . . . . . . 9-8


INDEX i-13

Winter Tires . . . . . . . . . . . . . . . . . . 10-42Wiper Blade Replacement . . . . 10-29Wiring, High VoltageDevices . . . . . . . . . . . . . . . . . . . . . 10-34


i-14 INDEX

2 NOTES

Documents

2014 Buick Regal Owner Manual M...Buick Regal Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- Black plate (2,1) 6081497) - 2014 - CRC 2nd Edition - 11/27/13 2014 Buick Regal Owner