Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Tools required:
M-13 M-17 M-19
Eye Goggles Wrench & Socket
Parts list:
Driver & Passenger Side Tube 2 Passenger Side Rear Bracket 1
Driver Side Front Bracket 1 Number ① Double T-Bolt Set 1
Driver Side Front Support Bracket 1 Number ② M12 T-Bolt Set 1
Driver Side Rear Bracket 1 Number ③ M10 T-Bolt Set 1
Passenger Side Front Bracket 1 Number ④ M10 Flange Bolt Set 1
Passenger Side Support Bracket 1 Number ⑤ M8 Flange Bolt Set 1
2014+Nissan Rogue Installation
Part #: 999T6T32USST
READ AND FOLLOW ALL WARNINGS AND INSTALLATION INSTRUCTIONS BEFORE BEGINNING THE INSTALLATION. WEAR SAFETY GLASSES AND USE ALL SAFETY PRECAUTIONS DURING THE INSTALLATION.
NOTE: Organizing the Hardware before install.
Torque all M12 hardwareto 110 ft.-lbs.
Torque all M10 hardware to 70 ft.-lbs.
Torque all M8 hardware to 48 ft.-lbs.
May use the plastics retainers for holding the T-Bolts.
And must remove before tightening the bracket.
1 of 4
Attach the driver side
front bracket. Then
insert the # ③M10
2 1 Driver side front mount location
Find the hole in the frame.
Then insert the # ③M10 T-
Bolt.
3
Insert the # ②M12 T-Bolt to the hole
4 Driver side front support
bracket mount
5 6
Use the # ④M10 flange
bolt to connect the front
bracket & the front
support bracket with #④
flange M10 nut
Find rear mount place
then insert the # ①
double T-bolt from
the oval hole through
to the round hole
Attach the driver side front
support bracket then insert
the # ②M12 flange nut
Driver side rear mount location
2 of 4
1
2
M10
Double
T-bolt
M17
4
2
M10
T-bolt
M17
2
2
M12
T-bolt
M19
5
2
M10
T-bolt
M13
3
2
M10
T-bolt
M17
4
Retainer
Remove
before
tighten the
bracket
7 8
Align and mount the driver side tube onto the
front & rear bracket with # ⑤M8 flange bolt
(TIGHTEN ALL BOLTS & NUTS THIS TIME)
Align and mount the
rear bracket onto the
# ① T-bolt with# ①
M10 flange nuts.
9. Repeat steps 1 to 8 for passenger side installation.
3 of 4
Sketch
4 of 4