Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
2015 NTPEP Report Series
LABORATORY EVALUATION SUMMARIES OF
EROSION CONTROL PRODUCTS
JANUARY 2015
American Association of State Highway and Transportation Officials (AASHTO)
Executive Office: 444 North Capitol Street, NW, Suite 249 ● Washington, DC ● 20001
(t) 202.624.5800 ● (f) 202.624.5806 ● www.aashto.org
PROLOGUE
General Facts about NTPEP Reports,
NTPEP Reports contain data collected according to laboratory testing protocols developed through a consensus-based decision by AASHTO’s NTPEP Committee. These test and evaluation protocols are described in the Project Work Plan.
Products are voluntarily submitted by manufacturers for testing by NTPEP. Testing fees are assessed from manufacturers to reimburse AASHTO member departments for conducting testing and to report results. AASHTO member departments provide a voluntary yearly contribution to support the administrative functions of NTPEP.
AASHTO/NTPEP does not endorse any manufacturer’s product over another. Use of certain proprietary products as “test control specimens” does not constitute endorsement of those products.
AASHTO/NTPEP does not issue product approval or disapproval; rather, test data is furnished for the User to make judgement for product prequalification or approval for their transportation agency.
Guidelines for Proper Use of NTPEP Results,
The User is urged to carefully read any introductory notes at the beginning of this Report. Also, to consider any special clauses, footnotes or conditions which may apply to any test reported herein. Any of these notes may be relevant to the proper use of NTPEP test data.
The User of this Report must be sufficiently familiar with the product performance requirements and/or (standard) specification of their agency in order to determine which test data is relevant to meeting those qualifying factors.
NTPEP Report Special Advisory for Erosion Control Products (ECP),
Products included in this edition of NTPEP Report on ECP’s are required to resubmit to NTPEP every three (3) years for requalification. In the Table of Contents, each product will display a Drop Date (Month and Year) as when the product expires. Hence, all products included in this Report supersede previous Editions of NTPEP Report on ECP’s.
For specific questions regarding this NTPEP Report or for advice on how to implement NTPEP data furnished in this Report the User is encouraged to contact the NTPEP Coordinator at (202) 624-5800 for a listing of NTPEP Lead States.
Brennan A. Roney, PE (GDOT) Tracy A. Stegmaier, PE (ALDOT) TC Chair TC Vice Chair
Table of Contents Page
1. INTRODUCTION 1
2. OBJECTIVE 1
3. SCOPE 1
4. BACKGROUND 1
5. TESTING METHODS 1‐3
6. CONTACT AND PRODUCT INFORMATION 3‐7
7. TESTING RESULTS 8‐135Plant Drop Date
American Excelsior Company
ECP‐2011‐01‐007 AEC Premier Straw Single Net Rice Lake, WI 9 Jul‐15ECP‐2011‐01‐008 AEC Premier Straw Double Net Rice Lake, WI 10 Jul‐15ECP‐2011‐03‐001 AEC Premier Straw FibreNet Single Net Norwalk, OH 11 Jul‐15ECP‐2011‐03‐002 AEC Premier Straw FibreNet Double Net Norwalk, OH 12 Jul‐15ECP‐2011‐03‐003 AEC Premier Straw/Coconut Fibrenet Norwalk, OH 13 Jul‐15ECP‐2011‐03‐004 AEC Premier Coconut Fibrenet Norwalk, OH 14 Jul‐15ECP‐2011‐03‐007 AEC Premier Coconut Norwalk, OH 15 Jul‐15ECP‐2012‐01‐013 AEC Premier Straw/Coconut Norwalk, OH 16 Jan‐16ECP‐2012‐01‐014 AEC Premier Straw/Coconut Florence, AL 17 Jan‐16ECP‐2012‐01‐015 Curlex II Rice Lake, WI 18 Jan‐16ECP‐2012‐01‐016 Curlex II FibreNet Rice Lake, WI 19 Jan‐16ECP‐2012‐01‐017 Curlex III Rice Lake, WI 20 Jan‐16ECP‐2012‐01‐018 Curlex High Velocity Rice Lake, WI 21 Jan‐16ECP‐2012‐01‐019 Curlex I FibreNet Rice Lake, WI 22 Jan‐16ECP‐2012‐01‐020 Curlex I Rice Lake, WI 23 Jan‐16ECP‐2012‐01‐021 Curlex NetFree Rice Lake, WI 24 Jan‐16ECP‐2012‐01‐022 Recyclex TRM Norwalk, OH 25 Jan‐16ECP‐2012‐01‐023 Recyclex TRM Florence, AL 26 Jan‐16ECP‐2012‐03‐015 Curlex II .98 Rice Lake, WI 27 Jan‐17ECP‐2012‐03‐016 Curlex Enforcer Rice Lake, WI 28 Jul‐16ECP‐2012‐03‐017 Recyclex TRM Rice Lake, WI 29 Jul‐16ECP‐2012‐03‐018 Recyclex TRM‐V Rice Lake, WI 30 Jul‐16ECP‐2014‐01‐011 AEC Premier Single Net Florence, AL 31 Jan‐18ECP‐2014‐01‐012 AEC Premier Double Net Florence, AL 32 Jan‐18ECP‐2014‐01‐013 AEC Premier Straw SN Norwalk, OH 33 Jan‐18ECP‐2014‐01‐014 AEC Premier Straw DN Norwalk, OH 34 Jan‐18ECP‐2014‐03‐017 Curlex I CL Rice Lake, WI 35 Jul‐18ECP‐2014‐03‐018 Curlex II CL Rice Lake, WI 36 Jul‐18ECP‐2014‐03‐020 AEC Premier Coconut Florence, AL 37 Jul‐18
Belton Industries
ECP‐2010‐04‐005 GEOCOIR 700 West Bengal, India 38 Jul‐15ECP‐2010‐04‐006 Anti‐Wash/GeoJute West Bengal, India 39 Jul‐15ECP‐2010‐04‐007 Eco‐Jute West Bengal, India 40 Jul‐15ECP‐2011‐01‐017 GEOCOIR 400 West Bengal, India 41 Jan‐16
East Coast Erosion Blankets, LLC
ECP‐2011‐04‐005 ECS‐1 Bernville, PA 42 Jan‐16ECP‐2011‐04‐006 ECS‐1D Bernville, PA 43 Jan‐16ECP‐2011‐04‐007 ECS‐2 Bernville, PA 44 Jan‐16ECP‐2011‐04‐008 ECS‐2D Bernville, PA 45 Jan‐16ECP‐2011‐04‐009 ECSC‐2 Bernville, PA 46 Jan‐16ECP‐2011‐04‐010 ECC‐2 Bernville, PA 47 Jan‐16
Plant Page Drop Date
East Coast Erosion Blankets, LLC (continued)
ECP‐2011‐04‐011 ECC‐3 Bernville, PA 48 Jan‐16ECP‐2011‐04‐012 ECS‐1B Bernville, PA 49 Jan‐16ECP‐2011‐04‐013 ECS‐2B Bernville, PA 50 Jan‐16ECP‐2011‐04‐014 ECSC‐2B Bernville, PA 51 Jan‐16ECP‐2011‐04‐015 ECC‐2B Bernville, PA 52 Jan‐16ECP‐2012‐01‐037 ECX‐1 Bernville, PA 53 Jan‐16ECP‐2012‐01‐038 ECX‐2 Bernville, PA 54 Jan‐16ECP‐2012‐01‐039 ECP‐2 Bernville, PA 55 Jan‐16ECP‐2012‐03‐010 ECP‐2 10 Bernville, PA 56 Jul‐16ECP‐2012‐03‐011 ECP‐3 Bernville, PA 57 Jul‐16ECP‐2012‐03‐012 ECSC‐3 Bernville, PA 58 Jul‐16ECP‐2013‐04‐005 T‐RECS Bernville, PA 59 Jan‐18
Enviroscape ECM, Ltd
ECP‐2011‐04‐016 SC3000 Oakwood, OH 60 Jul‐15ECP‐2011‐04‐017 C4000 Oakwood, OH 61 Jul‐15ECP‐2012‐04‐001 S2000 Oakwood, OH 62 Jul‐16ECP‐2012‐04‐002 S2000BD Oakwood, OH 63 Jul‐16
Ero‐Guard, Inc.
ECP‐2014‐01‐003 EG‐1s (NN) Mapleton, MN 64 Jan‐18ECP‐2014‐01‐004 EG‐2s (NN) Mapleton, MN 65 Jan‐18
Erosion Control Blanket
ECP‐2011‐01‐009 SC32 Riverton, Manitoba 66 Jan‐16ECP‐2011‐01‐010 S31 Riverton, Manitoba 67 Jan‐16ECP‐2011‐01‐011 S31 UVD Riverton, Manitoba 68 Jan‐16ECP‐2011‐01‐012 S32 UVD Riverton, Manitoba 69 Jan‐16ECP‐2011‐01‐013 SC32 BD Riverton, Manitoba 70 Jan‐16ECP‐2011‐01‐014 C32 BD Riverton, Manitoba 71 Jan‐16ECP‐2011‐01‐015 S31 BD Riverton, Manitoba 72 Jan‐16ECP‐2011‐01‐016 S32 BD Riverton, Manitoba 73 Jan‐16ECP‐2012‐01‐001 S32 Riverton, Manitoba 74 Jan‐16ECP‐2012‐01‐002 PS42 TRM Riverton, Manitoba 75 Jan‐16ECP‐2012‐01‐003 PC42 TRM Riverton, Manitoba 76 Jan‐16ECP‐2012‐01‐005 P42 Riverton, Manitoba 77 Jan‐16ECP‐2012‐01‐006 C32 Riverton, Manitoba 78 Jan‐16
Erosion Tech
ECP‐2012‐01‐010 ETSC‐70‐30 Juliette, GA 79 Jan‐16ECP‐2012‐01‐011 ETC‐100 Juliette, GA 80 Jan‐16ECP‐2012‐01‐040 ETX2‐HV Juliette, GA 81 Jan‐16ECP‐2013‐02‐009 ETPP‐10 Juliette, GA 82 Jan‐17ECP‐2013‐02‐010 ETRS‐1 Juliette, GA 83 Jan‐17ECP‐2013‐02‐011 ETRS‐2 Juliette, GA 84 Jan‐17ECP‐2014‐01‐005 ETRS2BN Juliette, GA 85 Jan‐18
Industrial Fabrics
ECP‐2013‐01‐008 Greensolutions SNS‐1 Baton Rouge, LA 86 Jan‐17ECP‐2013‐01‐009 Greensolutions DNS‐2 Baton Rouge, LA 87 Jan‐17
North American Green, Inc.
ECP‐2011‐01‐019 SC250 Poseyville, IN 88 Jul‐15ECP‐2011‐03‐011 SC150 Poseyville, IN 89 Jul‐15ECP‐2011‐04‐001 SC150BN Poseyville, IN 90 Jul‐15ECP‐2011‐04‐002 DS150 Poseyville, IN 91 Jul‐15
Plant Page Drop Date
North American Green, Inc. (continued)
ECP‐2011‐04‐003 C125 Poseyville, IN 92 Jul‐15ECP‐2012‐01‐026 S75BN Poseyville, IN 93 Jan‐16ECP‐2012‐01‐027 S150BN Poseyville, IN 94 Jan‐16ECP‐2012‐01‐028 C125BN Poseyville, IN 95 Jan‐16ECP‐2013‐01‐001 S75 Poseyville, IN 96 Jan‐17ECP‐2013‐01‐002 DS75 Poseyville, IN 97 Jan‐17ECP‐2013‐01‐003 S150 Poseyville, IN 98 Jan‐17ECP‐2013‐01‐004 P300 Poseyville, IN 99 Jan‐17ECP‐2013‐01‐005 C350 Poseyville, IN 100 Jan‐17
Propex Fabrics, Inc.
ECP‐2011‐02‐001 Landlok 300 Ringgold, GA 101 Jan‐16ECP‐2011‐02‐002 Pyramat Ringgold, GA 102 Jan‐16ECP‐2011‐02‐003 Landlok 450 Ringgold, GA 103 Jul‐15
Rhino Seed & Landscape Supply
ECP‐2012‐03‐020 Rhino Erosion King Straw Blanket Wayland, MI 104 Jan‐17ECP‐2012‐03‐021 Rhino Erosion King II Straw Blanket Wayland, MI 105 Jan‐17
U.S. Erosion Control Products, Inc.
ECP‐2012‐01‐032 US‐1X Single Net Excelsior Pearson, GA 106 Jan‐16ECP‐2012‐01‐033 US‐2X Double Net Excelsior Pearson, GA 107 Jan‐16ECP‐2013‐04‐007 US‐2C Willacoochee, GA 108 Jul‐17ECP‐2013‐04‐008 US‐2S/C Willacoochee, GA 109 Jul‐17ECP‐2013‐04‐009 US‐2P12 Willacoochee, GA 110 Jul‐17ECP‐2013‐04‐010 US‐1S Willacoochee, GA 111 Jul‐17ECP‐2013‐04‐011 US‐2S Willacoochee, GA 112 Jul‐17
Western Excelsior
ECP‐2011‐01‐025 EXCEL R‐1 All Natural Mancos, CO 113 Jul‐15ECP‐2011‐01‐026 EXCEL SR‐1 All Natural Mancos, CO 114 Jul‐15ECP‐2011‐01‐027 EXCEL S‐2 All Natural Mancos, CO 115 Jul‐15ECP‐2011‐01‐028 Excel S‐2 Mancos, CO 116 Jul‐15ECP‐2012‐03‐001 Excel PP5‐12 Mancos, CO 117 Jul‐16ECP‐2012‐03‐002 Excel SD‐3 Mancos, CO 118 Jul‐17ECP‐2012‐03‐003 Excel R‐1 Mancos, CO 119 Jul‐16ECP‐2012‐03‐004 Excel PP5‐10 Mancos, CO 120 Jul‐16ECP‐2012‐03‐005 Excel SR‐1 Mancos, CO 121 Jul‐16ECP‐2012‐03‐006 Excel PP5‐8 Mancos, CO 122 Jul‐16ECP‐2012‐03‐007 Excel CC‐4 All Natural Mancos, CO 123 Jul‐16ECP‐2012‐03‐008 Excel SS‐2 All Natural Mancos, CO 124 Jul‐16ECP‐2012‐03‐009 Excel CS‐3 All Natural Mancos, CO 125 Jul‐16ECP‐2013‐02‐001 Excel CC‐4 Mancos, CO 126 Jul‐17ECP‐2013‐02‐002 Excel CS‐3 Mancos, CO 127 Jul‐17ECP‐2013‐02‐003 Excel SS‐2 Mancos, CO 128 Jul‐17ECP‐2013‐02‐004 PP5‐Xtreme Mancos, CO 129 Jul‐17ECP‐2013‐04‐004 Excel PP5‐10 Macon, GA 130 Jul‐17
Winters Excelsior Company
ECP‐2014‐01‐006 Winters Straw HVBio Hutchinson, KS 131 Jan‐18ECP‐2014‐01‐007 WintersChoice Bio Hutchinson, KS 132 Jan‐18ECP‐2014‐01‐008 WintersChoice Hutchinson, KS 133 Jan‐18ECP‐2014‐01‐009 WinterStraw HVG Hutchinson, KS 134 Jan‐18ECP‐2014‐01‐010 WinterStraw SN Hutchinson, KS 135 Jan‐18
1. INTRODUCTION
The National Transportation Product Evaluation Program (NTPEP) was developed in order to evaluate a variety of safety and traffic operations products, as well as a variety of construction and maintenance materials. This report provides information on the evaluation of erosion control products (ECP).
2. OBJECTIVE
The goal of the NTPEP is to combine and focus the resources of the participating NTPEP member departments, and in this case a contracted private testing laboratory, in the evaluation of material of common interest in order to improve cost-effectiveness. This report provides the NTPEP member departments the necessary information to evaluate different rolled erosion control products without any investment of their time and manpower in testing. In keeping with the NTPEP philosophy of purely testing materials, no conclusions are given in this report. The evaluation of this report is left up to each member department. Wisconsin and Alabama are the lead states in charge of sampling the materials for the testing of erosion control products. A private laboratory performs the testing.
3. SCOPE
This report contains only the summary results of products tested during the time frame noted on the report cover. Full reports containing index testing, determination of an unvegetated ECP’s ability to protect soil from rain splash and associated runoff under bench-scale conditions, determination of an unvegetated ECP’s ability to protect soil from hydraulically-induced shear stresses under bench-scale conditions, and determination of temporary degradable ECP’s performance in encouraging seed germination and plant growth may be found on the NTPEP website at data.ntpep.org.
4. BACKGROUND
Previously, erosion control products manufacturers submitted Product Evaluation Forms to the NTPEP Coordinators. The NTPEP Coordinators then assigned each material a number ECP(xx-yy)-zz as indicated in sections 6c. Starting in 2010 with the introduction of DataMine 2.0, AASHTO’s web database, the naming convention changed to ECP-xxxx-yy-zzz. The product evaluation forms are transmitted electronically to the lead state and testing laboratory for approval. After product approval, the manufacturers are notified and their invoice is made available for payment. Once payment is received, the lead state arranges to have the products sampled and sent to the testing laboratory.
5. TESTING METHODS USED IN EVALUATION OF ROLLED EROSION CONTROL PRODUCTS
TABLE 1: Index Testing
Test Method Description Parameters ASTM D 6475 Mass Per Unit Area Index Test ASTM D 6818 Ultimate Tensile Strength / Strain MD-TD Index Test ASTM D 6525 Thickness Index Test ASTM D 6567 Ground Cover / Light Penetration Index Test ASTM D 1117 & ECTC-TASC 00197 Water Absorption Index Test
1
A series of BENCH SCALE tests have been developed by the Erosion Control Technology Council (ECTC) to make erosion control product (ECP) testing more cost-effective and time-efficient. The NTPEP has incorporated these testing methods into its ECP testing program. Following is a brief guide to understanding and using the data generated in the testing program.
Bench Scale Slope Erosion Test – ASTM D 7101
Description: This ASTM test method titled, “Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rainsplash and Associated Runoff under Bench-Scale Conditions” established the guidelines, requirements and procedures for evaluating the ability of Rolled Erosion Control Products (RECPs) to protect soils from rainsplash and immediate runoff-induced erosion. The critical element of this protection is the ability of the RECP to absorb the impact force of raindrops, thereby reducing soil particle loosening through “splash” mechanisms. The test method utilized a laboratory-scale testing apparatus, rather than full-scale field simulation. This test method is bench-scale and therefore, appropriate as an index test for initial indication of product performance, for general comparison of RECP capabilities, and for product quality assurance/conformance testing. The results of this test may not be indicative of a RECPs actual field performance.
Data Generated: The index cover value obtained with this bench scale procedure is for initial performance indication, general product comparison and conformance purposes only. It should not be used as a factor in estimating RECP soil protection in actual field use with such calculations as the Universal Soil Loss Equation (USLE) or Revised Universal Soil Loss Equation (RUSLE) without verification from qualified, large-scale tests.
Bench Scale Channel Erosion Test – ASTM D 7207
Description: The ASTM test method titled, “Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Hydraulically-Induced Shear Stresses Under Bench-Scale Conditions” established the guidelines, requirements and procedures for evaluating the ability of Rolled Erosion Control Products (RECPs) to protect soils from flow-induced erosion. The test method utilizes a laboratory-scale testing apparatus, rather than full-scale field simulation. This test method is bench-scale and therefore, appropriate as an index test for initial indication of product performance, for general comparison of RECP capabilities, and for product quality assurance/conformance testing. The results of this test may not be indicative of a RECPs actual field performance.
Data Generated: The Index Limiting Shear Stress value obtained with this bench-scale procedure is for initial performance indication, general product comparison and conformance purposes only. It should not be used as a maximum permissible shear stress value for a RECP in actual channel protection design using the Maximum Shear Stress Channel Design Procedure without verification from qualified, large-scale tests.
2
Bench Scale Vegetation Enhancement – ASTM D 7322
Description: The ASTM test method titled, “Determination of Temporary Degradable Rolled Erosion Control Product (RECP) in Encouraging Seed Germination and Plant Growth” establishes the guidelines, requirements and procedures for evaluating the ability of Rolled Erosion Control Products (RECPs) to nurture vegetation growth. This test method is bench‐scale and therefore, appropriate as an index test for initial indication of product performance, for general comparison of RECP capabilities, and for product quality assurance/conformance testing. The results of this test may not be indicative of a RECPs actual field performance.
Data Generated: The index test is conducted on a single indexed seed mix. Test sets are designed to evaluate an RECP’s ability to enhance the rate and quantity of germination, and facilitate subsequent establishment of vegetation. The results of the testing include the rate and total weight of germination and vegetation growth after 21 days. From this data a percent enhancement can be calculated by comparing the covered results to the control. The rate of germination is measured periodically throughout the test, and the weight of vegetation is calculated at the conclusion of the test.
6A. LEAD STATE CONTACTS
Chair Vice Chair
Mr. Brennan Roney, Georgia DOT Mrs. Tracy Stegmaier, Alabama DOT
Address: Office of Materials, State Laboratory Address: Construction Bureau 15 Kennedy Drive 1409 Coliseum Boulevard Forest Park, GA 30297 Montgomery, AL 36110 Phone: (404) 608‐4816 Phone: (334) 242‐6244 Email: [email protected] Email: [email protected]
6B. TESTING LABORATORY CONTACTS
Mr. Sam Allen and Mr. Jarrett Nelson, TRI
Address: 9063 Bee Caves Road Austin, TX 78733 Phone: (512) 263‐2101 or (800) 880‐8378 Email: sallen@tri‐env.com jnelson@tri‐env.com
3
6C. ROLLED EROSION CONTROL PRODUCT NUMBER DESIGNATIONS
NTPEP Number Product Name Plant Page Drop Date
ECP‐2010‐04‐005 GEOCOIR 700 West Bengal, India 38 Jul‐15ECP‐2010‐04‐006 Anti‐Wash/GeoJute West Bengal, India 39 Jul‐15ECP‐2010‐04‐007 Eco‐Jute West Bengal, India 40 Jul‐15ECP‐2011‐01‐007 AEC Premier Straw Single Net Rice Lake, WI 9 Jul‐15ECP‐2011‐01‐008 AEC Premier Straw Double Net Rice Lake, WI 10 Jul‐15ECP‐2011‐01‐009 SC32 Riverton, Manitoba 66 Jan‐16ECP‐2011‐01‐010 S31 Riverton, Manitoba 67 Jan‐16ECP‐2011‐01‐011 S31 UVD Riverton, Manitoba 68 Jan‐16ECP‐2011‐01‐012 S32 UVD Riverton, Manitoba 69 Jan‐16ECP‐2011‐01‐013 SC32 BD Riverton, Manitoba 70 Jan‐16ECP‐2011‐01‐014 C32 BD Riverton, Manitoba 71 Jan‐16ECP‐2011‐01‐015 S31 BD Riverton, Manitoba 72 Jan‐16ECP‐2011‐01‐016 S32 BD Riverton, Manitoba 73 Jan‐16ECP‐2011‐01‐017 GEOCOIR 400 West Bengal, India 41 Jan‐16ECP‐2011‐01‐019 SC250 Poseyville, IN 88 Jul‐15ECP‐2011‐01‐025 EXCEL R‐1 All Natural Mancos, CO 113 Jul‐15ECP‐2011‐01‐026 EXCEL SR‐1 All Natural Mancos, CO 114 Jul‐15ECP‐2011‐01‐027 EXCEL S‐2 All Natural Mancos, CO 115 Jul‐15ECP‐2011‐01‐028 Excel S‐2 Mancos, CO 116 Jul‐15ECP‐2011‐02‐001 Landlok 300 Ringgold, GA 101 Jan‐16ECP‐2011‐02‐002 Pyramat Ringgold, GA 102 Jan‐16ECP‐2011‐02‐003 Landlok 450 Ringgold, GA 103 Jul‐15ECP‐2011‐03‐001 AEC Premier Straw FibreNet Single Net Norwalk, OH 11 Jul‐15ECP‐2011‐03‐002 AEC Premier Straw FibreNet Double Net Norwalk, OH 12 Jul‐15ECP‐2011‐03‐003 AEC Premier Straw/Coconut Fibrenet Norwalk, OH 13 Jul‐15ECP‐2011‐03‐004 AEC Premier Coconut Fibrenet Norwalk, OH 14 Jul‐15ECP‐2011‐03‐007 AEC Premier Coconut Norwalk, OH 15 Jul‐15ECP‐2011‐03‐011 SC150 Poseyville, IN 89 Jul‐15ECP‐2011‐04‐001 SC150BN Poseyville, IN 90 Jul‐15ECP‐2011‐04‐002 DS150 Poseyville, IN 91 Jul‐15ECP‐2011‐04‐003 C125 Poseyville, IN 92 Jul‐15ECP‐2011‐04‐005 ECS‐1 Bernville, PA 42 Jan‐16ECP‐2011‐04‐006 ECS‐1D Bernville, PA 43 Jan‐16ECP‐2011‐04‐007 ECS‐2 Bernville, PA 44 Jan‐16ECP‐2011‐04‐008 ECS‐2D Bernville, PA 45 Jan‐16ECP‐2011‐04‐009 ECSC‐2 Bernville, PA 46 Jan‐16ECP‐2011‐04‐010 ECC‐2 Bernville, PA 47 Jan‐16ECP‐2011‐04‐011 ECC‐3 Bernville, PA 48 Jan‐16ECP‐2011‐04‐012 ECS‐1B Bernville, PA 49 Jan‐16ECP‐2011‐04‐013 ECS‐2B Bernville, PA 50 Jan‐16ECP‐2011‐04‐014 ECSC‐2B Bernville, PA 51 Jan‐16ECP‐2011‐04‐015 ECC‐2B Bernville, PA 52 Jan‐16ECP‐2011‐04‐016 SC3000 Oakwood, OH 60 Jul‐15ECP‐2011‐04‐017 C4000 Oakwood, OH 61 Jul‐15ECP‐2012‐01‐001 S32 Riverton, Manitoba 74 Jan‐16ECP‐2012‐01‐002 PS42 TRM Riverton, Manitoba 75 Jan‐16ECP‐2012‐01‐003 PC42 TRM Riverton, Manitoba 76 Jan‐16ECP‐2012‐01‐005 P42 Riverton, Manitoba 77 Jan‐16ECP‐2012‐01‐006 C32 Riverton, Manitoba 78 Jan‐16
4
NTPEP Number Product Name Plant Page Drop Date
ECP‐2012‐01‐010 ETSC‐70‐30 Juliette, GA 79 Jan‐16ECP‐2012‐01‐011 ETC‐100 Juliette, GA 80 Jan‐16ECP‐2012‐01‐013 AEC Premier Straw/Coconut Norwalk, OH 16 Jan‐16ECP‐2012‐01‐014 AEC Premier Straw/Coconut Florence, AL 17 Jan‐16ECP‐2012‐01‐015 Curlex II Rice Lake, WI 18 Jan‐16ECP‐2012‐01‐016 Curlex II FibreNet Rice Lake, WI 19 Jan‐16ECP‐2012‐01‐017 Curlex III Rice Lake, WI 20 Jan‐16ECP‐2012‐01‐018 Curlex High Velocity Rice Lake, WI 21 Jan‐16ECP‐2012‐01‐019 Curlex I FibreNet Rice Lake, WI 22 Jan‐16ECP‐2012‐01‐020 Curlex I Rice Lake, WI 23 Jan‐16ECP‐2012‐01‐021 Curlex NetFree Rice Lake, WI 24 Jan‐16ECP‐2012‐01‐022 Recyclex TRM Norwalk, OH 25 Jan‐16ECP‐2012‐01‐023 Recyclex TRM Florence, AL 26 Jan‐16ECP‐2012‐01‐026 S75BN Poseyville, IN 93 Jan‐16ECP‐2012‐01‐027 S150BN Poseyville, IN 94 Jan‐16ECP‐2012‐01‐028 C125BN Poseyville, IN 95 Jan‐16ECP‐2012‐01‐032 US‐1X Single Net Excelsior Pearson, GA 106 Jan‐16ECP‐2012‐01‐033 US‐2X Double Net Excelsior Pearson, GA 107 Jan‐16ECP‐2012‐01‐037 ECX‐1 Bernville, PA 53 Jan‐16ECP‐2012‐01‐038 ECX‐2 Bernville, PA 54 Jan‐16ECP‐2012‐01‐039 ECP‐2 Bernville, PA 55 Jan‐16ECP‐2012‐01‐040 ETX2‐HV Juliette, GA 81 Jan‐16ECP‐2012‐03‐001 Excel PP5‐12 Mancos, CO 117 Jul‐16ECP‐2012‐03‐002 Excel SD‐3 Mancos, CO 118 Jul‐17ECP‐2012‐03‐003 Excel R‐1 Mancos, CO 119 Jul‐16ECP‐2012‐03‐004 Excel PP5‐10 Mancos, CO 120 Jul‐16ECP‐2012‐03‐005 Excel SR‐1 Mancos, CO 121 Jul‐16ECP‐2012‐03‐006 Excel PP5‐8 Mancos, CO 122 Jul‐16ECP‐2012‐03‐007 Excel CC‐4 All Natural Mancos, CO 123 Jul‐16ECP‐2012‐03‐008 Excel SS‐2 All Natural Mancos, CO 124 Jul‐16ECP‐2012‐03‐009 Excel CS‐3 All Natural Mancos, CO 125 Jul‐16ECP‐2012‐03‐010 ECP‐2 10 Bernville, PA 56 Jul‐16ECP‐2012‐03‐011 ECP‐3 Bernville, PA 57 Jul‐16ECP‐2012‐03‐012 ECSC‐3 Bernville, PA 58 Jul‐16ECP‐2012‐03‐015 Curlex II .98 Rice Lake, WI 27 Jan‐17ECP‐2012‐03‐016 Curlex Enforcer Rice Lake, WI 28 Jul‐16ECP‐2012‐03‐017 Recyclex TRM Rice Lake, WI 29 Jul‐16ECP‐2012‐03‐018 Recyclex TRM‐V Rice Lake, WI 30 Jul‐16ECP‐2012‐03‐020 Rhino Erosion King Straw Blanket Wayland, MI 104 Jan‐17ECP‐2012‐03‐021 Rhino Erosion King II Straw Blanket Wayland, MI 105 Jan‐17ECP‐2012‐04‐001 S2000 Oakwood, OH 62 Jul‐16ECP‐2012‐04‐002 S2000BD Oakwood, OH 63 Jul‐16ECP‐2013‐01‐001 S75 Poseyville, IN 96 Jan‐17ECP‐2013‐01‐002 DS75 Poseyville, IN 97 Jan‐17ECP‐2013‐01‐003 S150 Poseyville, IN 98 Jan‐17ECP‐2013‐01‐004 P300 Poseyville, IN 99 Jan‐17ECP‐2013‐01‐005 C350 Poseyville, IN 100 Jan‐17ECP‐2013‐01‐008 Greensolutions SNS‐1 Baton Rouge, LA 86 Jan‐17ECP‐2013‐01‐009 Greensolutions DNS‐2 Baton Rouge, LA 87 Jan‐17ECP‐2013‐02‐001 Excel CC‐4 Mancos, CO 126 Jul‐17ECP‐2013‐02‐002 Excel CS‐3 Mancos, CO 127 Jul‐17ECP‐2013‐02‐003 Excel SS‐2 Mancos, CO 128 Jul‐17
5
NTPEP Number Product Name Plant Page Drop Date
ECP‐2013‐02‐004 PP5‐Xtreme Mancos, CO 129 Jul‐17ECP‐2013‐02‐009 ETPP‐10 Juliette, GA 82 Jan‐17ECP‐2013‐02‐010 ETRS‐1 Juliette, GA 83 Jan‐17ECP‐2013‐02‐011 ETRS‐2 Juliette, GA 84 Jan‐17ECP‐2013‐04‐004 Excel PP5‐10 Macon, GA 130 Jul‐17ECP‐2013‐04‐005 T‐RECS Bernville, PA 59 Jan‐18ECP‐2013‐04‐007 US‐2C Willacoochee, GA 108 Jul‐17ECP‐2013‐04‐008 US‐2S/C Willacoochee, GA 109 Jul‐17ECP‐2013‐04‐009 US‐2P12 Willacoochee, GA 110 Jul‐17ECP‐2013‐04‐010 US‐1S Willacoochee, GA 111 Jul‐17ECP‐2013‐04‐011 US‐2S Willacoochee, GA 112 Jul‐17ECP‐2014‐01‐003 EG‐1s (NN) Mapleton, MN 64 Jan‐18ECP‐2014‐01‐004 EG‐2s (NN) Mapleton, MN 65 Jan‐18ECP‐2014‐01‐005 ETRS2BN Juliette, GA 85 Jan‐18ECP‐2014‐01‐006 Winters Straw HVBio Hutchinson, KS 131 Jan‐18ECP‐2014‐01‐007 WintersChoice Bio Hutchinson, KS 132 Jan‐18ECP‐2014‐01‐008 WintersChoice Hutchinson, KS 133 Jan‐18ECP‐2014‐01‐009 WinterStraw HVG Hutchinson, KS 134 Jan‐18ECP‐2014‐01‐010 WinterStraw SN Hutchinson, KS 135 Jan‐18ECP‐2014‐01‐011 AEC Premier Single Net Florence, AL 31 Jan‐18ECP‐2014‐01‐012 AEC Premier Double Net Florence, AL 32 Jan‐18ECP‐2014‐01‐013 AEC Premier Straw SN Norwalk, OH 33 Jan‐18ECP‐2014‐01‐014 AEC Premier Straw DN Norwalk, OH 34 Jan‐18ECP‐2014‐03‐017 Curlex I CL Rice Lake, WI 35 Jul‐18ECP‐2014‐03‐018 Curlex II CL Rice Lake, WI 36 Jul‐18ECP‐2014‐03‐020 AEC Premier Coconut Florence, AL 37 Jul‐18
6
6D. PARTICIPATING VENDOR CONTACT INFORMATION
American Excelsior Company Industrial Fabrics, Inc.
Address: 831 Pioneer Avenue Address: 4604 Macks DriveRice Lake, WI 54868 Bossier City, LA 71111
Contact: Kurt Kelsey Contact: Charles William Hartman
Phone: (715) 236‐5643 Phone: (318) 741‐5791Email: [email protected] Email: chartman@ind‐fab.comWebsite: www.curlex.com Website: www.ind‐fab.com
Belton Industries North American Green, Inc.
Address: PO Box 127 Address: 5401 St. Wendel ‐ Cynthiana RoadBelton, SC 29627 Poseyville, IN 47633
Contact: Robert E. Moran Contact: Jill A. PackPhone: (800) 845‐8753 Phone: (800) 772‐2040Email: [email protected] Email: [email protected]
Website: www.beltonindustries.com Website: www.nagreen.com
East Coast Erosion Blankets, LLC Propex Fabrics, Inc.
Address: 443 Bricker Road Address: 6025 Lee Hwy, Suite 402Bernville , PA 19506 Chattanooga, TN 37421
Contact: Diane M. Hitt Contact: Andy BurranPhone: (610) 488‐8496 Phone: (423) 553‐2372Email: [email protected] Email: [email protected]
Website: www.eastcoasterosion.com Website: www.geotextile.com
Enviroscape ECM, Ltd Rhino Seed & Landscape Supply
Address: 22700 SR‐613 Address: P.O. Box 86Oakwood, OH 45873 Bradley, MI 49311
Contact: Mark Deitering Contact: Tricia Chismar
Phone: (419) 594‐3210 Phone: (269) 792‐2242Email: [email protected] Email: [email protected]
Website: www.strawblanket.com Website: www.rhinoseed.com
Ero‐Guard, Inc. U.S. Erosion Control Products, Inc.
Address: 731 Prior Avenue North Address: P.O. Box 370Saint Paul, MN 55104 Willacoochee, GA 31650
Contact: Brian Dingels Contact: Randy Massingill
Phone: (612) 382‐2783 Phone: (864) 990‐6606Email: brian@ero‐guard.com Email: [email protected]
Website: www.ero‐guard.com Website: www.landmsupplyco.com
Erosion Control Blanket .com Western Excelsior
Address: Box 69 Address: P.O. Box 270308Riverton, Manitoba, Canada, R0C 2R0 Fort Collins, CO 80527
Contact: Mark Myrowich Contact: Chad M. Lipscomb
Phone: (866) 280‐7327 Phone: (970) 631‐8366
Email: [email protected] Email: [email protected]
Website: www.erosioncontrolblanket.com Website: www.westernexcelsior.com
Erosion Tech Winters Excelsior Company
Address: 105 Plant Camelia Road Address: P.O. Box 102Juliette, GA 31046 Alton, AL 35015
Contact: Josh J. Still Contact: Frank BarnesPhone: (478) 994‐6009 Phone: (205) 908‐7170Email: [email protected] Email: [email protected]
Website: www.erosiontechusa.com Website: www.WintersExcelsior.com
7
7. RESULTS
8
American Excelsior Company American Excelsior Company
850 Ave. H East 831 Pioneer AveArlington, Texas 76005 RiceLake, WI 54868
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-01-007
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
8.74 oz/sq.yd.11.0 lb/in @ % 28.43.9 lb/in @ % 26.5
263 mils87.8 % / % 12.2
419 %Soil Loss Ratio* = 7.89Soil Loss Ratio* = 8.88Soil Loss Ratio* = 9.99
Shear: 1.26 psf for 30 min. Soil Loss = 171.7 gShear: 1.82 psf for 30 min. Soil Loss = 760.0 gShear: 2.39 psf for 30 min. Soil Loss = 1295.0 g
1.71 psf @ ½-in soil loss
= 523%
100% synthetic @ 1.5 in. transverse stitchspacing
Test ResultParameters
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
Test Results
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:
AEC Premier Straw SN
Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
Single net temporary straw erosion controlblanket
Synthetic top net with 0.5 inch square openings
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
9
American Excelsior Company American Excelsior Company
850 Ave. H East 831 Pioneer AveArlington, Texas 76005 RiceLake, WI 54868
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-01-008
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
9.18 oz/sq.yd.15.0 lb/in @ % 26.77.0 lb/in @ % 26.4
271 mils90.1 % / % 9.9
392 %Soil Loss Ratio* = 8.55Soil Loss Ratio* = 7.48Soil Loss Ratio* = 6.54
Shear: 0.69 psf for 30 min. Soil Loss = 40.0 gShear: 1.82 psf for 30 min. Soil Loss = 496.7 gShear: 2.39 psf for 30 min. Soil Loss = 1065.0 g
1.88 psf @ ½-in soil loss
= 631%(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Test Results
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:
AEC Premier Straw DN
Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
100% synthetic @ 1.5 in. transverse stitchspacing
Double-netted temporary straw erosion controlblanket
Synthetic top and bottom nets each with 0.5 inchsquare openings
Test ResultParameters
10
American Excelsior Company American Excelsior Company
850 Ave. H East 180 Cleveland RoadArlington, Texas 76005 Norwalk, OH 44857
Kurt Kelsey David PeasleePhone: 715-236-5643 Phone: 419-663-3241Fax: 715-236-5627 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-03-001
Product Identification: AEC Premier Straw FibreNet Single Net
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
9.17 oz/sq.yd.12.4 lb/in @ % 9.15.9 lb/in @ % 26.2
332 mils90.5 % / % 9.5
419 %Soil Loss Ratio* = 20.77Soil Loss Ratio* = 16.33Soil Loss Ratio* = 12.84
Shear: 0.69 psf for 30 min. Soil Loss = 46.7 gShear: 1.26 psf for 30 min. Soil Loss = 361.7 gShear: 1.82 psf for 30 min. Soil Loss = 701.7 g
1.54 psf @ ½-in soil loss
= 473%
Parameters
Biodegradable Jute top net with 0.4375 x 0.5inch openings
Test Results
100% Organic @ 1.5 in. transverse stitchspacing
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
Single biodegradable net straw temporaryerosion control blanket
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
11
American Excelsior Company American Excelsior Company
850 Ave. H East 180 Cleveland RoadArlington, Texas 76005 Norwalk, OH 44857
Kurt Kelsey David PeasleePhone: 715-236-5643 Phone: 419-663-3241Fax: 715-236-5627 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-03-002
Product Identification: AEC Premier Straw FibreNet Double Net
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
7.44 oz/sq.yd.17.2 lb/in @ % 12.111.6 lb/in @ % 11.8
339 mils84.6 % / % 15.4
394 %Soil Loss Ratio* = 11.13Soil Loss Ratio* = 10.28Soil Loss Ratio* = 9.48
Shear: 1.28 psf for 30 min. Soil Loss = 130.0 gShear: 1.85 psf for 30 min. Soil Loss = 361.7 gShear: 2.41 psf for 30 min. Soil Loss = 1165.0 g
1.94 psf @ ½-in soil loss
= 538%
Parameters
Biodegradable Jute top and bottom nets eachwith 0.4375 x 0.5 inch openings
Test Results
100% Organic @ 1.5 in. transverse stitchspacing
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
Double biodegradable net straw temporaryerosion control blanket
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
12
American Excelsior Company American Excelsior Company
850 Ave. H East 180 Cleveland RoadArlington, Texas 76005 Norwalk, OH 44857
Kurt Kelsey David PeasleePhone: 715-236-5643 Phone: 419-663-3241Fax: 715-236-5627 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-03-003
Product Identification: AEC Premier Straw/Coconut FibreNet
Description:
Netting:
Matrix/Fill: 70% Straw / 30% Coconut
Stitching:
8.21 oz/sq.yd.17.7 lb/in @ % 15.316.8 lb/in @ % 11.6
278 mils85.0 % / % 15.0
413 %Soil Loss Ratio* = 12.37Soil Loss Ratio* = 12.87Soil Loss Ratio* = 13.40
Shear: 1.33 psf for 30 min. Soil Loss = 165.0 gShear: 1.95 psf for 30 min. Soil Loss = 378.3 gShear: 2.56 psf for 30 min. Soil Loss = 651.7 g
2.19 psf @ ½-in soil loss
= 464%(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
Test ResultParameters
Biodegradable Jute top and bottom nets eachwith 0.4375 x 0.5 inch openings
Test Results
Double biodegradable net straw/coconuttemporary erosion control blanket
100% Organic @ 1.5 in. transverse stitchspacing
13
American Excelsior Company American Excelsior Company
850 Ave. H East 180 Cleveland RoadArlington, Texas 76005 Norwalk, OH 44857
Kurt Kelsey David PeasleePhone: 715-236-5643 Phone: 419-663-3241Fax: 715-236-5627 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-03-004
Product Identification: AEC Premier Coconut FibreNet
Description:
Netting:
Matrix/Fill: 100% coconut
Stitching:
7.72 oz/sq.yd.23.4 lb/in @ % 14.515.2 lb/in @ % 14.7
196 mils75.2 % / % 24.8
398 %Soil Loss Ratio* = 9.71Soil Loss Ratio* = 11.94Soil Loss Ratio* = 14.69
Shear: 1.85 psf for 30 min. Soil Loss = 255.0 gShear: 2.56 psf for 30 min. Soil Loss = 460.0 gShear: 3.28 psf for 30 min. Soil Loss = 1216.7 g
2.43 psf @ ½-in soil loss
= 338%
Test ResultParameters
Biodegradable Jute top and bottom nets eachwith 0.4375 x 0.5 inch openings
Test Results
Double biodegradable net coconut temporaryerosion control blanket
100% Organic @ 1.5 in. transverse stitchspacing
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
14
American Excelsior Company American Excelsior Company
850 Ave. H East 180 Cleveland RoadArlington, Texas 76005 Norwalk, OH 44857
Kurt Kelsey David PeasleePhone: 715-236-5643 Phone: 419-663-3241Fax: 715-236-5627 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-03-007
Product Identification: AEC Premier Coconut
Description:
Netting:
Matrix/Fill: 100% coconut
Stitching:
8.02 oz/sq.yd.24.1 lb/in @ % 25.817.2 lb/in @ % 30.6
257 mils78.8 % / % 21.2
276 %Soil Loss Ratio* = 15.16Soil Loss Ratio* = 16.54Soil Loss Ratio* = 18.05
Shear: 1.80 psf for 30 min. Soil Loss = 146.7 gShear: 2.46 psf for 30 min. Soil Loss = 431.7 gShear: 3.13 psf for 30 min. Soil Loss = 1213.3 g
2.50 psf @ ½-in soil loss
= 415%(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
Test ResultParameters
100% synthetic @ 1.5 in. transverse stitchspacing
Synthetic top and bottom nets each with 0.75inch square openings
Double-netted temporary coconut erosion controlblanket
Test Results
15
American Excelsior Company American Excelsior Company
850 Ave. H East 180 Cleveland RoadArlington, Texas 76005 Norwalk, OH 44857
Kurt Kelsey David PeasleePhone: 715-236-5643 Phone: 419-663-3241Fax: 715-236-5627 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-013
Product Identification:
Description:
Netting:
Matrix/Fill: 70% Straw / 30% Coconut
Stitching:
7.67 oz/sq.yd.14.1 lb/in @ % 26.09.9 lb/in @ % 32.5
249 mils85.3 % / % 14.7
415 %Soil Loss Ratio* = 9.29Soil Loss Ratio* = 9.65Soil Loss Ratio* = 10.02
Shear: 1.35 psf for 30 min. Soil Loss = 151.7 gShear: 1.95 psf for 30 min. Soil Loss = 486.7 gShear: 2.57 psf for 30 min. Soil Loss = 786.7 g
2.07 psf @ ½-in soil loss
= 465%(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Test Results
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:
AEC Premier Straw/Coconut
Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Test ResultParameters
Double-netted temporary straw/coconut erosioncontrol blanket
100% Synthetic @ 1.5 in. transverse stitchspacing
Synthetic top and bottom nets each with 0.5 inchsquare openings
16
American Excelsior Company American Excelsior Company
850 Ave. H East 4032 Parkway DriveArlington, Texas 76005 Florence, AL 35630
Kurt Kelsey Chuck RayburnPhone: 715-236-5643 Phone: 256-764-4613Fax: 715-236-5627 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-014
Product Identification:
Description:
Netting:
Matrix/Fill: 70% Straw / 30% Coconut
Stitching:
8.09 oz/sq.yd.17.0 lb/in @ % 27.512.1 lb/in @ % 36.5
218 mils84.4 % / % 15.6
366 %Soil Loss Ratio* = 12.49Soil Loss Ratio* = 12.73Soil Loss Ratio* = 12.97
Shear: 1.35 psf for 30 min. Soil Loss = 190.0 gShear: 1.95 psf for 30 min. Soil Loss = 393.3 gShear: 2.57 psf for 30 min. Soil Loss = 746.7 g
2.11 psf @ ½-in soil loss
= 419%
Test ResultParameters
Double-netted temporary straw/coconut erosioncontrol blanket
100% Synthetic @ 1.5 in. transverse stitchspacing
Synthetic top and bottom nets each with 0.5 inchsquare openings
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:
AEC Premier Straw/Coconut
Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Test Results
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
17
American Excelsior Company American Excelsior Company
850 Ave. H East 831 Pioneer AveArlington, Texas 76005 RiceLake, WI 54868
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-015
Product Identification: Curlex II
Description:
Netting:
Matrix/Fill: 100% Great Lakes Aspen curledwood excelsior
Stitching:
9.08 oz/sq.yd.10.6 lb/in @ % 28.64.2 lb/in @ % 29.8
449 mils62.6 % / % 37.4
193 %Soil Loss Ratio* = 5.03Soil Loss Ratio* = 5.92Soil Loss Ratio* = 6.97
Shear: 1.75 psf for 30 min. Soil Loss = 190.0 gShear: 2.55 psf for 30 min. Soil Loss = 430.0 gShear: 3.35 psf for 30 min. Soil Loss = 1171.7 g
2.54 psf @ ½-in soil loss
= 412%
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Double net excelsior temporary erosion controlblanket
Parameters
Test Results
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
100% Synthetic @ 4.0 in. transverse stitchspacing
Synthetic top and bottom nets each with 1.0 x2.0 inch rectangular openings
18
American Excelsior Company American Excelsior Company
850 Ave. H East 831 Pioneer AveArlington, Texas 76005 RiceLake, WI 54868
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-016
Product Identification: Curlex II FibreNet
Description:
Netting:
Matrix/Fill: 100% Great Lakes Aspen curledwood excelsior
Stitching:
11.06 oz/sq.yd.14.8 lb/in @ % 16.413.3 lb/in @ % 13.6
347 mils68.7 % / % 31.3
221 %Soil Loss Ratio* = 7.35Soil Loss Ratio* = 9.72Soil Loss Ratio* = 12.86
Shear: 1.75 psf for 30 min. Soil Loss = 78.3 gShear: 2.55 psf for 30 min. Soil Loss = 328.3 gShear: 3.35 psf for 30 min. Soil Loss = 968.3 g
2.83 psf @ ½-in soil loss
= 522%
100% Organic @ 4.0 in. transverse stitchspacing
Biodegradable Jute top and bottom nets eachwith 0.4375 x 0.5 inch openings
Parameters
Test Results
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Double biodegradable net excelsior temporaryerosion control blanket
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
19
American Excelsior Company American Excelsior Company
850 Ave. H East 831 Pioneer AveArlington, Texas 76005 RiceLake, WI 54868
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-017
Product Identification: Curlex III
Description:
Netting:
Matrix/Fill: 100% Great Lakes Aspen curledwood excelsior
Stitching:
16.24 oz/sq.yd.21.0 lb/in @ % 30.517.0 lb/in @ % 30.8
496 mils86.4 % / % 13.6
189 %Soil Loss Ratio* = 10.11Soil Loss Ratio* = 11.02Soil Loss Ratio* = 12.00
Shear: 3.35 psf for 30 min. Soil Loss = 345.0 gShear: 4.10 psf for 30 min. Soil Loss = 488.3 gShear: 4.86 psf for 30 min. Soil Loss = 1233.3 g
3.78 psf @ ½-in soil loss
= 615%
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Double net excelsior temporary erosion controlblanket
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
100% Synthetic @ 4.0 in. transverse stitchspacing
Synthetic top & bottom nets (both 0.75 inchsquare openings)
Parameters
Test Results
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
20
American Excelsior Company American Excelsior Company
850 Ave. H East 831 Pioneer AveArlington, Texas 76005 RiceLake, WI 54868
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-018
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Great Lakes Aspen curledwood excelsior
Stitching:
17.24 oz/sq.yd.22.2 lb/in @ % 34.114.4 lb/in @ % 37.2
574 mils92.6 % / % 7.4
180 %Soil Loss Ratio* = 12.82Soil Loss Ratio* = 12.27Soil Loss Ratio* = 11.75
Shear: 3.35 psf for 30 min. Soil Loss = 236.7 gShear: 4.10 psf for 30 min. Soil Loss = 460.0 gShear: 4.49 psf for 30 min. Soil Loss = 525.0 g
4.20 psf @ ½-in soil loss
= 377%
100% Synthetic @ 4.0 in. transverse stitchspacing
Synthetic top & bottom nets (both 0.75 inchsquare openings)
Double net excelsior temporary erosion controlblanket
Parameters
Test Results
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Curlex High Velocity
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
21
American Excelsior Company American Excelsior Company
850 Ave. H East 831 Pioneer AveArlington, Texas 76005 RiceLake, WI 54868
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-019
Product Identification: Curlex I FibreNet
Description:
Netting:
Matrix/Fill: 100% Great Lakes Aspen curledwood excelsior
Stitching:
10.29 oz/sq.yd.11.7 lb/in @ % 12.110.0 lb/in @ % 13.6
386 mils67.5 % / % 32.5
207 %Soil Loss Ratio* = 5.50Soil Loss Ratio* = 5.83Soil Loss Ratio* = 6.17
Shear: 1.75 psf for 30 min. Soil Loss = 115.0 gShear: 2.55 psf for 30 min. Soil Loss = 643.3 gShear: 3.35 psf for 30 min. Soil Loss = 1006.7 g
2.60 psf @ ½-in soil loss
= 480%
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Biodegradable Jute top net with 0.4375 x 0.5inch openings
Single biodegradable net excelsior temporaryerosion control blanket
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
100% Organic @ 4.0 in. transverse stitchspacing
22
American Excelsior Company American Excelsior Company
850 Ave. H East 831 Pioneer AveArlington, Texas 76005 RiceLake, WI 54868
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-020
Product Identification: Curlex I
Description:
Netting:
Matrix/Fill: 100% Great Lakes Aspen curledwood excelsior
Stitching:
8.81 oz/sq.yd.5.2 lb/in @ % 42.22.6 lb/in @ % 31.8
317 mils46.2 % / % 53.8
197 %Soil Loss Ratio* = 4.11Soil Loss Ratio* = 4.44Soil Loss Ratio* = 4.79
Shear: 0.88 psf for 30 min. Soil Loss = 30.0 gShear: 1.75 psf for 30 min. Soil Loss = 191.7 gShear: 2.55 psf for 30 min. Soil Loss = 620.0 g
2.32 psf @ ½-in soil loss
= 552%
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Single net excelsior temporary erosion controlblanket
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
100% Synthetic @ 4.0 in. transverse stitchspacing
Synthetic top net (1.0 x 2.0 inch rectangularopenings)
Parameters
Test Results
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
23
American Excelsior Company American Excelsior Company
850 Ave. H East 831 Pioneer AveArlington, Texas 76005 RiceLake, WI 54868
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-021
Product Identification: Curlex Net Free
Description:
Netting:
Matrix/Fill: 100% Great Lakes Aspen curledwood excelsior
Stitching:
9.20 oz/sq.yd.8.8 lb/in @ % 25.01.0 lb/in @ % 22.8
428 mils65.5 % / % 34.5
204 %Soil Loss Ratio* = 4.04Soil Loss Ratio* = 4.53Soil Loss Ratio* = 5.09
Shear: 0.88 psf for 30 min. Soil Loss = 18.3 gShear: 1.75 psf for 30 min. Soil Loss = 350.0 gShear: 2.55 psf for 30 min. Soil Loss = 1838.3 g
1.97 psf @ ½-in soil loss
= 323%
None
Netless excelsior temporary erosion controlblanket
Parameters
Test Results
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
100% biodegradable
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
24
American Excelsior Company American Excelsior Company
850 Ave. H East 180 Cleveland RoadArlington, Texas 76005 Norwalk, OH 44857
Kurt Kelsey David PeasleePhone: 715-236-5643 Phone: 419-663-3241Fax: 715-236-5627 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-022
Product Identification: Recyclex TRM
Description:
Netting:
Matrix/Fill: 100% Recycled Post Consumer Polyester
Stitching:
11.16 oz/sq.yd.29.0 lb/in @ % 26.431.7 lb/in @ % 40.4
299 mils44.1 % / % 55.9
0.913 g/cm3Soil Loss Ratio* = 6.18Soil Loss Ratio* = 5.89Soil Loss Ratio* = 5.62
Shear: 1.65 psf for 30 min. Soil Loss = 278.3 gShear: 2.43 psf for 30 min. Soil Loss = 358.3 gShear: 3.58 psf for 30 min. Soil Loss = 631.7 g
2.84 psf @ ½-in soil loss
= 526%
Index Test
Manufacturer: Plant Name:
Corporate Address: Plant Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Plant Contact:
100% Synthetic @ 1.5 in. transverse stitchspacing
Corporate Contact:
City/State/Zip:City/State/Zip:
Parameters
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ECTC Method 3 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ECTC Draft Method 4 - Determination of TemporaryDegradable RECP Performance in Encouraging SeedGermination and Plant Growth
ECTC Method 2 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Synthetic top and bottom nets (top net: 0.75 x 1.0inch openings) (bottom net: 0.75 x 0.75 inchopenings)
Double-netted synthetic permanent turfreinforcement mat with polymer fiber fill
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
25
American Excelsior Company American Excelsior Company
850 Ave. H East 4032 Parkway DriveArlington, Texas 76005 Florence, AL 35630
Kurt Kelsey Chuck RayburnPhone: 715-236-5643 Phone: 256-764-4613Fax: 715-236-5627 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-023
Product Identification: Recyclex TRM
Description:
Netting:
Matrix/Fill: 100% Recycled Post Consumer Polyester
Stitching:
10.85 oz/sq.yd.28.2 lb/in @ % 22.936.6 lb/in @ % 34.4
269 mils43.5 % / % 56.5
0.914 g/cm3Soil Loss Ratio* = 5.37Soil Loss Ratio* = 5.52Soil Loss Ratio* = 5.68
Shear: 1.65 psf for 30 min. Soil Loss = 116.7 gShear: 2.43 psf for 30 min. Soil Loss = 406.7 gShear: 3.21 psf for 30 min. Soil Loss = 660.0 g
2.75 psf @ ½-in soil loss
= 435%
Index Test
Manufacturer: Plant Name:
Corporate Address: Plant Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Plant Contact:
100% Synthetic @ 1.5 in. transverse stitchspacing
Corporate Contact:
City/State/Zip:City/State/Zip:
Parameters
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ECTC Method 3 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ECTC Draft Method 4 - Determination of TemporaryDegradable RECP Performance in Encouraging SeedGermination and Plant Growth
ECTC Method 2 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Synthetic top and bottom nets (top net: 0.75 x 1.0inch openings) (bottom net: 0.75 x 0.75 inchopenings)
Double-netted synthetic permanent turfreinforcement mat with polymer fiber fill
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
26
American Excelsior Company American Excelsior Company
850 Ave. H East 831 Pioneer AveArlington, Texas 76005 RiceLake, WI 54868
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-015
Product Identification: Curlex II .98
Description:
Netting:
Matrix/Fill: 100% Great Lakes Aspen curledwood excelsior
Stitching:
14.00 oz/sq.yd.10.3 lb/in @ % 34.63.7 lb/in @ % 29.4
425 mils69.7 % / % 30.3
183 %Soil Loss Ratio* = 11.66Soil Loss Ratio* = 10.15Soil Loss Ratio* = 8.83
Shear: 2.05 psf for 30 min. Soil Loss = 368.3 gShear: 2.79 psf for 30 min. Soil Loss = 513.3 gShear: 3.58 psf for 30 min. Soil Loss = 1358.3 g
2.41 psf @ ½-in soil loss
= 370%
Double net excelsior temporary erosion controlblanket
Parameters
Test Results
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
100% Synthetic @ 4.0 in. transverse stitchspacing
Synthetic top and bottom nets each with 1.0 x2.0 inch rectangular openings
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
27
American Excelsior Company American Excelsior Company
850 Ave. H East 831 Pioneer AveArlington, Texas 76005 RiceLake, WI 54868
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-016
Product Identification: Curlex Enforcer
Description:
Netting:
Matrix/Fill: 100% Great Lakes Aspen curledwood excelsior
Stitching:
18.98 oz/sq.yd.41.9 lb/in @ % 19.748.7 lb/in @ % 27.7
414 mils89.1 % / % 10.9
166 %Soil Loss Ratio* = 10.21Soil Loss Ratio* = 10.55Soil Loss Ratio* = 10.89
Shear: 2.47 psf for 30 min. Soil Loss = 206.7 gShear: 3.27 psf for 30 min. Soil Loss = 400.0 gShear: 4.06 psf for 30 min. Soil Loss = 613.3 g
3.55 psf @ ½-in soil loss
= 371%
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Double net excelsior temporary erosion controlblanket
Parameters
Test Results
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
100% Synthetic @ 4.0 in. transverse stitchspacing
Synthetic top and bottom nets each with 0.75 x1.0 inch rectangular openings
28
American Excelsior Company American Excelsior Company
850 Ave. H East 831 Pioneer AveArlington, Texas 76005 RiceLake, WI 54868
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-017
Product Identification: Recyclex TRM
Description:
Netting:
Matrix/Fill: 100% Recycled Post Consumer Polyester
Stitching:
10.67 oz/sq.yd.27.1 lb/in @ % 23.734.6 lb/in @ % 33.4
317 mils52.5 % / % 47.5
0.898 g/cm3Soil Loss Ratio* = 6.80Soil Loss Ratio* = 7.25Soil Loss Ratio* = 7.72
Shear: 2.43 psf for 30 min. Soil Loss = 246.7 gShear: 3.21 psf for 30 min. Soil Loss = 473.3 gShear: 3.90 psf for 30 min. Soil Loss = 1396.7 g
3.02 psf @ ½-in soil loss
= 490%
Index Test
Manufacturer: Plant Name:
Corporate Address: Plant Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Plant Contact:
100% Synthetic @ 1.5 in. transverse stitchspacing
Corporate Contact:
City/State/Zip:City/State/Zip:
Parameters
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ECTC Method 3 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ECTC Draft Method 4 - Determination of TemporaryDegradable RECP Performance in Encouraging SeedGermination and Plant Growth
ECTC Method 2 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Synthetic top and bottom nets (top net: 0.75 x 1.0inch openings) (bottom net: 0.75 x 0.75 inchopenings)
Double-netted synthetic permanent turfreinforcement mat with polymer fiber fill
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
29
American Excelsior Company American Excelsior Company
850 Ave. H East 831 Pioneer AveArlington, Texas 76005 RiceLake, WI 54868
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-018
Product Identification: Recyclex TRM-V
Description:
Netting:
Matrix/Fill: 100% Recycled Post Consumer Polyester
Stitching:
8.17 oz/sq.yd.20.2 lb/in @ % 28.911.8 lb/in @ % 35.7
286 mils41.2 % / % 58.8
0.872 g/cm3Soil Loss Ratio* = 4.79Soil Loss Ratio* = 5.21Soil Loss Ratio* = 5.66
Shear: 1.65 psf for 30 min. Soil Loss = 291.7 gShear: 2.43 psf for 30 min. Soil Loss = 448.3 gShear: 3.21 psf for 30 min. Soil Loss = 780.0 g
2.37 psf @ ½-in soil loss
= 413%
Index Test
Manufacturer: Plant Name:
Corporate Address: Plant Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Plant Contact:Corporate Contact:
City/State/Zip:City/State/Zip:
Parameters
Index Test
Index Test
Test Results
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ECTC Method 3 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ECTC Draft Method 4 - Determination of TemporaryDegradable RECP Performance in Encouraging SeedGermination and Plant Growth
ECTC Method 2 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
100% Synthetic @ 1.5 in. transverse stitchspacing
Synthetic top and bottom nets (each with 0.75square openings)
Double-netted synthetic permanent turfreinforcement mat with polymer fiber fill
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
30
American Excelsior Company American Excelsior Company
831 Pioneer Ave. 4032 Parkway DriveRice Lake, WI 54868 Florence, AL 35360
Kurt Kelsey Chuck RayburnPhone: 715-236-5643 Phone: 256-764-4613Fax: 715-236-5627 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2014-01-011
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
7.65 oz/sq.yd.9.7 lb/in @ % 28.34.2 lb/in @ % 34.8
325 mils86.2 % / % 13.8
405 %Soil Loss Ratio* = 5.14Soil Loss Ratio* = 5.08Soil Loss Ratio* = 5.02
Shear: 1.26 psf for 30 min. Soil Loss = 273.3 gShear: 2.39 psf for 30 min. Soil Loss = 1216.7 gShear: 2.96 psf for 30 min. Soil Loss = 1855.0 g
1.65 psf @ ½-in soil loss
= 559%
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
AEC Premier Straw SN
Synthetic top net with 0.5 inch square openings
100% synthetic @ 1.5 in. transverse stitchspacing
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Single net temporary straw erosion controlblanket
31
American Excelsior Company American Excelsior Company
831 Pioneer Ave. 4032 Parkway DriveRice Lake, WI 54868 Florence, AL 35360
Kurt Kelsey Chuck RayburnPhone: 715-236-5643 Phone: 256-764-4613Fax: 715-236-5627 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2014-01-012
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
8.59 oz/sq.yd.12.0 lb/in @ % 31.97.7 lb/in @ % 31.4
321 mils86.4 % / % 13.6
447 %Soil Loss Ratio* = 6.62Soil Loss Ratio* = 7.31Soil Loss Ratio* = 8.08
Shear: 1.82 psf for 30 min. Soil Loss = 370.0 gShear: 2.39 psf for 30 min. Soil Loss = 746.7 gShear: 2.96 psf for 30 min. Soil Loss = 893.3 g
1.96 psf @ ½-in soil loss
= 535%
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
100% synthetic @ 1.5 in. transverse stitchspacing
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Double-netted temporary straw erosion controlblanket
Synthetic top and bottom nets each with 0.5 inchsquare openings
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
AEC Premier Straw DN
32
American Excelsior Company American Excelsior Company
831 Pioneer Ave. 180 Cleveland RoadRice Lake, WI 54868 Norwalk, OH 44857
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2014-01-013
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
7.63 oz/sq.yd.10.8 lb/in @ % 25.63.2 lb/in @ % 24.8
398 mils94.6 % / % 5.4
428 %Soil Loss Ratio* = 7.53Soil Loss Ratio* = 8.38Soil Loss Ratio* = 9.32
Shear: 1.26 psf for 30 min. Soil Loss = 286.7 gShear: 1.82 psf for 30 min. Soil Loss = 716.7 gShear: 2.39 psf for 30 min. Soil Loss = 885.0 g
1.59 psf @ ½-in soil loss
= 688%
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
AEC Premier Straw SN
Synthetic top net with 0.5 inch square openings
100% synthetic @ 1.5 in. transverse stitchspacing
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Single net temporary straw erosion controlblanket
33
American Excelsior Company American Excelsior Company
831 Pioneer Ave. 180 Cleveland RoadRice Lake, WI 54868 Norwalk, OH 44857
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2014-01-014
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
8.19 oz/sq.yd.15.8 lb/in @ % 24.65.7 lb/in @ % 29.8
359 mils91.8 % / % 8.2
405 %Soil Loss Ratio* = 9.58Soil Loss Ratio* = 7.53Soil Loss Ratio* = 5.92
Shear: 1.82 psf for 30 min. Soil Loss = 358.3 gShear: 2.39 psf for 30 min. Soil Loss = 816.7 gShear: 2.96 psf for 30 min. Soil Loss = 843.3 g
1.95 psf @ ½-in soil loss
= 530%
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
100% synthetic @ 1.5 in. transverse stitchspacing
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Double-netted temporary straw erosion controlblanket
Synthetic top and bottom nets each with 0.5 inchsquare openings
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
AEC Premier Straw DN
34
American Excelsior Company American Excelsior Company
831 Pioneer Ave. 831 Pioneer Ave.Rice Lake, WI 54868 Rice Lake, WI 54868
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2014-03-017
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Great Lakes Aspen curled woodexcelsior.
Stitching:
7.74 oz/sq.yd.4.4 lb/in @ % 44.22.4 lb/in @ % 34.5
323 mils68.2 % / % 31.8
205 %Soil Loss Ratio* = 5.23Soil Loss Ratio* = 5.35Soil Loss Ratio* = 5.48
Shear: 0.92 psf for 30 min. Soil Loss = 115.0 gShear: 1.72 psf for 30 min. Soil Loss = 385.0 gShear: 2.51 psf for 30 min. Soil Loss = 1461.7 g
1.79 psf @ ½-in soil loss
= 423%
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Single net excelsior temporary erosion controlblanket
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
100% synthetic @ 4.0 in. transverse stitchspacing
Synthetic top net with 1.0 x 2.0 inch rectangularopenings
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
Curlex I CL
35
American Excelsior Company American Excelsior Company
831 Pioneer Ave. 831 Pioneer Ave.Rice Lake, WI 54868 Rice Lake, WI 54868
Kurt Kelsey Kurt KelseyPhone: 715-236-5643 Phone: 715-236-5643Fax: 715-236-5627 Fax: 715-236-5627E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2014-03-018
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Great Lakes Aspen curled woodexcelsior.
Stitching:
7.87 oz/sq.yd.6.4 lb/in @ % 34.23.4 lb/in @ % 28.1
286 mils68.8 % / % 31.2
200 %Soil Loss Ratio* = 5.82Soil Loss Ratio* = 6.35Soil Loss Ratio* = 6.93
Shear: 0.92 psf for 30 min. Soil Loss = 100.0 gShear: 1.72 psf for 30 min. Soil Loss = 268.3 gShear: 2.51 psf for 30 min. Soil Loss = 780.0 g
2.10 psf @ ½-in soil loss
= 361%
100% synthetic @ 4.0 in. transverse stitchspacing
Synthetic top and bottom nets each with 1.0 x2.0 inch rectangular openings
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
Curlex II CL
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Double net excelsior temporary erosion controlblanket
36
American Excelsior Company American Excelsior Company
831 Pioneer Ave. 4032 Parkway DriveRice Lake, WI 54868 Florence, AL 35360
Kurt Kelsey Chuck RayburnPhone: 715-236-5643 Phone: 256-764-4613Fax: 715-236-5627 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2014-03-020
Product Identification:
Description:
Netting:
Matrix/Fill: 100% coconut
Stitching:
8.03 oz/sq.yd.23.0 lb/in @ % 30.115.8 lb/in @ % 35.3
195 mils87.3 % / % 12.7
247 %Soil Loss Ratio* = 12.64Soil Loss Ratio* = 14.78Soil Loss Ratio* = 17.28
Shear: 1.39 psf for 30 min. Soil Loss = 113.3 gShear: 2.09 psf for 30 min. Soil Loss = 275.0 gShear: 2.75 psf for 30 min. Soil Loss = 800.0 g
2.38 psf @ ½-in soil loss
= 450%
Synthetic top and bottom nets each with 0.75inch square openings
Double-netted temporary coconut erosion controlblanket
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
AEC Premier Coconut
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
100% synthetic @ 1.5 in. transverse stitchspacing
37
Belton Industries, Inc. Belton Industries, Inc.
PO Box 127 5600 Oakbrook Pkwy, Suite 150Belton, SC 29627 Norcross, GA 30093
Bob Moran Bob MoranPhone: 800-225-4099 Phone: 800-225-4099Fax: 770-248-1655 Fax: 770-248-1655E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2010-04-005
Product Identification:
Description:
Netting:
Matrix/Fill: N/A
Stitching:
18.96 oz/sq.yd.102.8 lb/in @ % 45.175.8 lb/in @ % 40.3
396 mils63.9 % / % 36.1
184 %Soil Loss Ratio* = 6.89Soil Loss Ratio* = 7.49Soil Loss Ratio* = 8.14
Shear: 1.46 psf for 30 min. Soil Loss = 148.3 gShear: 2.31 psf for 30 min. Soil Loss = 465.0 gShear: 3.23 psf for 30 min. Soil Loss = 733.3 g
2.55 psf @ ½-in soil loss
= 366%
Test ResultParameters
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
N/A
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:
Geocoir 700
Open weave textile fabric woven form coconutfiber yarns
Open weave coconut fiber net (700 g/m2) having6 x 6 mm rectangular openings
Manufacturer:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Test Results
38
Belton Industries, Inc. Belton Industries, Inc.
PO Box 127 5600 Oakbrook Pkwy, Suite 150Belton, SC 29627 Norcross, GA 30093
Bob Moran Bob MoranPhone: 800-225-4099 Phone: 800-225-4099Fax: 770-248-1655 Fax: 770-248-1655E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2010-04-006
Product Identification:
Description:
Netting:
Matrix/Fill: N/A
Stitching:
11.93 oz/sq.yd.100.0 lb/in @ % 16.963.2 lb/in @ % 22.9
158 mils55.5 % / % 44.5
444 %Soil Loss Ratio* = 7.62Soil Loss Ratio* = 7.26Soil Loss Ratio* = 6.92
Shear: 0.99 psf for 30 min. Soil Loss = 83.3 gShear: 1.81 psf for 30 min. Soil Loss = 738.3 gShear: 2.64 psf for 30 min. Soil Loss = 1415.0 g
1.82 psf @ ½-in soil loss
= 231%
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Test Results
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
N/A
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:
Anti-Wash/Geojute
Manufacturer:
100% Biogegradable Organic Jute Netting with0.75 inch square openings
Organic woven Jute Mesh
Test ResultParameters
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
39
Belton Industries, Inc. Belton Industries, Inc.
PO Box 127 5600 Oakbrook Pkwy, Suite 150Belton, SC 29627 Norcross, GA 30093
Bob Moran Bob MoranPhone: 800-225-4099 Phone: 800-225-4099Fax: 770-248-1655 Fax: 770-248-1655E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2010-04-007
Product Identification:
Description:
Netting:
Matrix/Fill: N/A
Stitching:
5.98 oz/sq.yd.47.5 lb/in @ % 12.747.8 lb/in @ % 16.5
86 mils52.2 % / % 47.8
385 %Soil Loss Ratio* = 7.49Soil Loss Ratio* = 6.96Soil Loss Ratio* = 6.47
Shear: 0.99 psf for 30 min. Soil Loss = 18.3 gShear: 1.81 psf for 30 min. Soil Loss = 225.0 gShear: 2.64 psf for 30 min. Soil Loss = 998.3 g
2.24 psf @ ½-in soil loss
= 302%
Test ResultParameters
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
N/A
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:
Eco-Jute
Manufacturer:
Organic woven Jute Mesh
100% Biogegradable Organic Jute Netting with0.25 inch square openings
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Test Results
40
Belton Industries, Inc. Belton Industries, Inc.
PO Box 127 1205 Hamby RdBelton, SC 29627 Belton, SC 29627
Bob Moran Dave GallowayPhone: 800-845-8753 Phone: 800-845-8753Fax: 800-851-5049 Fax: 800-851-5049E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-01-017
Product Identification:
Description:
Netting:
Matrix/Fill: N/A
Stitching:
10.39 oz/sq.yd.37.3 lb/in @ % 44.833.6 lb/in @ % 34.9
352 mils45.6 % / % 54.4
237 %Soil Loss Ratio* = 5.63Soil Loss Ratio* = 4.47Soil Loss Ratio* = 3.55
Shear: 0.45 psf for 30 min. Soil Loss = 18.3 gShear: 0.96 psf for 30 min. Soil Loss = 421.7 gShear: 1.75 psf for 30 min. Soil Loss = 1220.0 g
1.30 psf @ ½-in soil loss
= 377%
Test ResultParameters
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
N/A
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:
Geocoir 400
Open weave textile fabric woven form coconutfiber yarns
Open weave coconut fiber net with rectangularopenings
Manufacturer:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Test Results
41
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-04-005
Product Identification: ECS-1
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
6.55 oz/sq.yd.6.0 lb/in @ % 34.94.7 lb/in @ % 25.4
218 mils77.7 % / % 22.3
377 %Soil Loss Ratio* = 5.63Soil Loss Ratio* = 5.60Soil Loss Ratio* = 5.58
Shear: 0.72 psf for 30 min. Soil Loss = 96.7 gShear: 1.28 psf for 30 min. Soil Loss = 626.7 gShear: 1.85 psf for 30 min. Soil Loss = 820.0 g
1.39 psf @ ½-in soil loss
= 484%
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Index Test
Synthetic top net with 0.5 inch square openings
Test Method - Description
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
ASTM D 6475 - Mass per Unit Area
Plant Name:
100% Synthetic @ 1.5 in. transverse stitchspacing
Single net straw temporary erosion controlblanket
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Test ResultParameters
Test Results
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Address:City/State/Zip:
Plant Contact:
42
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-04-006
Product Identification: ECS-1D
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
7.12 oz/sq.yd.7.1 lb/in @ % 22.94.0 lb/in @ % 28.2
242 mils74.5 % / % 25.5
458 %Soil Loss Ratio* = 6.29Soil Loss Ratio* = 5.81Soil Loss Ratio* = 5.37
Shear: 0.72 psf for 30 min. Soil Loss = 253.3 gShear: 1.28 psf for 30 min. Soil Loss = 570.0 gShear: 1.85 psf for 30 min. Soil Loss = 1511.7 g
1.10 psf @ ½-in soil loss
= 517%
Test ResultParameters
Test Results
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Address:City/State/Zip:
Plant Contact:
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index TestTest Method - Description
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
ASTM D 6475 - Mass per Unit Area
Plant Name:
Accelerated photodegradable single net strawtemporary erosion control blanket
100% Synthetic @ 1.5 in. transverse stitchspacing
Rapid degradable (1% UV accelerator) synthetictop net with 0.5 inch square openings
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
43
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-04-007
Product Identification: ECS-2
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
8.04 oz/sq.yd.10.6 lb/in @ % 30.911.4 lb/in @ % 30.3
276 mils84.4 % / % 15.6
391 %Soil Loss Ratio* = 5.85Soil Loss Ratio* = 6.88Soil Loss Ratio* = 8.08
Shear: 1.28 psf for 30 min. Soil Loss = 273.3 gShear: 1.85 psf for 30 min. Soil Loss = 695.0 gShear: 2.40 psf for 30 min. Soil Loss = 1320.0 g
1.61 psf @ ½-in soil loss
= 455%
Synthetic top and bottom nets each with 0.5 inchsquare openings
Double net straw temporary erosion controlblanket
Test ResultParameters
Test Results
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
City/State/Zip:
Plant Contact:
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
100% Synthetic @ 1.5 in. transverse stitchspacing
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index TestTest Method - Description
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
ASTM D 6475 - Mass per Unit Area
Plant Name:
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Plant Address:
44
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-04-008
Product Identification: ECS-2D
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
8.37 oz/sq.yd.12.2 lb/in @ % 29.27.7 lb/in @ % 30.0
229 mils75.6 % / % 24.4
368 %Soil Loss Ratio* = 7.87Soil Loss Ratio* = 8.82Soil Loss Ratio* = 9.88
Shear: 0.72 psf for 30 min. Soil Loss = 21.7 gShear: 1.28 psf for 30 min. Soil Loss = 570.0 gShear: 1.85 psf for 30 min. Soil Loss = 866.7 g
1.50 psf @ ½-in soil loss
= 542%
100% Synthetic @ 1.5 in. transverse stitchspacing
Rapid degradable (1% UV accelerator) synthetictop and bottom nets each with 0.5 inch squareopenings
Test ResultParameters
Test Results
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
City/State/Zip:
Plant Contact:
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Accelerated photodegradable double net strawtemporary erosion control blanket
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index TestTest Method - Description
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
ASTM D 6475 - Mass per Unit Area
Plant Name:
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Plant Address:
45
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-04-009
Product Identification: ECSC-2
Description:
Netting:
Matrix/Fill: 70% Straw / 30% Coconut
Stitching:
8.35 oz/sq.yd.14.1 lb/in @ % 31.213.3 lb/in @ % 26.4
231 mils89.0 % / % 11.0
436 %Soil Loss Ratio* = 8.49Soil Loss Ratio* = 11.01Soil Loss Ratio* = 14.26
Shear: 1.35 psf for 30 min. Soil Loss = 183.3 gShear: 1.95 psf for 30 min. Soil Loss = 356.7 gShear: 2.58 psf for 30 min. Soil Loss = 723.3 g
2.16 psf @ ½-in soil loss
= 504%
Synthetic UV stabilized top net (0.75 inch squareopenings) and lightweight photodegradablebottom net (0.5 inch square openings)
Double net straw/coconut temporary erosioncontrol blanket
Test ResultParameters
Test Results
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
City/State/Zip:
Plant Contact:
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
100% Synthetic @ 1.5 in. transverse stitchspacing
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index TestTest Method - Description
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
ASTM D 6475 - Mass per Unit Area
Plant Name:
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Plant Address:
46
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-04-010
Product Identification: ECC-2
Description:
Netting:
Matrix/Fill: 100% Coconut
Stitching:
8.48 oz/sq.yd.20.2 lb/in @ % 29.812.5 lb/in @ % 27.7
180 mils75.8 % / % 24.2
199 %Soil Loss Ratio* = 8.45Soil Loss Ratio* = 10.44Soil Loss Ratio* = 12.88
Shear: 2.08 psf for 30 min. Soil Loss = 271.7 gShear: 2.75 psf for 30 min. Soil Loss = 493.3 gShear: 3.40 psf for 30 min. Soil Loss = 1110.0 g
2.59 psf @ ½-in soil loss
= 772%
Heavyweight UV stabilized top and bottom netseach with 0.75 inch square openings
Double net coconut temporary erosion controlblanket
Test ResultParameters
Test Results
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
City/State/Zip:
Plant Contact:
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
100% Synthetic @ 1.5 in. transverse stitchspacing
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index TestTest Method - Description
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
ASTM D 6475 - Mass per Unit Area
Plant Name:
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Plant Address:
47
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-004-011
Product Identification: ECC-3
Description:
Netting:
Matrix/Fill: 100 % Coconut
Stitching:
11.47 oz/sq.yd.59.6 lb/in @ % 16.553.6 lb/in @ % 19.9
338 mils87.3 % / % 12.7
0.919 g/cm3Soil Loss Ratio* = 7.70Soil Loss Ratio* = 10.43Soil Loss Ratio* = 14.14
Shear: 2.15 psf for 30 min. Soil Loss = 206.7 gShear: 2.83 psf for 30 min. Soil Loss = 358.3 gShear: 3.51 psf for 30 min. Soil Loss = 606.7 g
3.13 psf @ ½-in soil loss
= 364%
Heavyweight synthetic top and bottom nets eachwith 0.5 inch square openings and Heavyweightmiddle net with 0.4 x 0.5 inch rectangularopenings
Triple net coconut permanent turf reinforcementmat'
100% Synthetic @ 1.5 in. transverse stitchspacing
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ECTC Method 3 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ECTC Draft Method 4 - Determination of TemporaryDegradable RECP Performance in Encouraging SeedGermination and Plant Growth
ECTC Method 2 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index TestASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
ASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description Parameters
Index Test
Index Test
Index Test- TD
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Address:
Plant Contact:
Manufacturer: Plant Name:
Corporate Address:City/State/Zip:City/State/Zip:
Corporate Contact:
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
48
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-04-012
Product Identification: ECS-1B
Description:
Netting:
Matrix/Fill: 100 % wheat straw
Stitching:
8.11 oz/sq.yd.11.9 lb/in @ % 14.04.6 lb/in @ % 20.5
256 mils78.7 % / % 21.3
492 %Soil Loss Ratio* = 6.75Soil Loss Ratio* = 7.47Soil Loss Ratio* = 8.26
Shear: 0.72 psf for 30 min. Soil Loss = 48.3 gShear: 1.28 psf for 30 min. Soil Loss = 455.0 gShear: 1.85 psf for 30 min. Soil Loss = 1095.0 g
1.45 psf @ ½-in soil loss
= 580%
Test ResultParameters
Test Results
Organic leno weave jute top net with 0.5 x 1.0inch rectangular openings)
Biodegradable single net straw temporaryerosion control blanket.
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Address:City/State/Zip:
Plant Contact:
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index TestTest Method - Description
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
ASTM D 6475 - Mass per Unit Area
Plant Name:
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
100% Organic @ 1.5 in. transverse stitchspacing
49
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-04-013
Product Identification: ECS-2B
Description:
Netting:
Matrix/Fill: 100 % wheat straw
Stitching:
8.21 oz/sq.yd.22.9 lb/in @ % 13.711.5 lb/in @ % 15.3
204 mils79.9 % / % 20.1
511 %Soil Loss Ratio* = 10.69Soil Loss Ratio* = 12.24Soil Loss Ratio* = 14.01
Shear: 1.28 psf for 30 min. Soil Loss = 218.3 gShear: 1.85 psf for 30 min. Soil Loss = 388.3 gShear: 2.40 psf for 30 min. Soil Loss = 990.0 g
1.87 psf @ ½-in soil loss
= 370%
Parameters
Test Results
100% Organic @ 1.5 in. transverse stitchspacing
Organic leno weave jute top and bottom netseach with 0.5 x 1.0 inch rectangular openings
Biodegradable double net straw temporaryerosion control blanket.
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
City/State/Zip:
Plant Contact:
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Test Result
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index TestTest Method - Description
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
ASTM D 6475 - Mass per Unit Area
Plant Name:
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Plant Address:
50
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-04-014
Product Identification: ECSC-2B
Description:
Netting:
Matrix/Fill: 70 % wheat straw / 30% coconut
Stitching:
9.06 oz/sq.yd.15.6 lb/in @ % 15.610.6 lb/in @ % 22.5
224 mils87.4 % / % 12.6
361 %Soil Loss Ratio* = 11.95Soil Loss Ratio* = 13.62Soil Loss Ratio* = 15.52
Shear: 1.94 psf for 30 min. Soil Loss = 236.7 gShear: 2.56 psf for 30 min. Soil Loss = 415.0 gShear: 3.18 psf for 30 min. Soil Loss = 1431.7 g
2.46 psf @ ½-in soil loss
= 671%
Parameters
Test Results
100% Organic @ 1.5 in. transverse stitchspacing
Organic leno weave jute top and bottom netseach with 0.5 x 1.0 inch rectangular openings
Biodegradable double net straw/coconuttemporary erosion control blanket.
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
City/State/Zip:
Plant Contact:
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Test Result
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index TestTest Method - Description
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
ASTM D 6475 - Mass per Unit Area
Plant Name:
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Plant Address:
51
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-04-015
Product Identification: ECC-2B
Description:
Netting:
Matrix/Fill: 100% coconut
Stitching:
9.15 oz/sq.yd.22.4 lb/in @ % 14.49.3 lb/in @ % 27.7
207 mils81.5 % / % 18.5
340 %Soil Loss Ratio* = 14.15Soil Loss Ratio* = 18.14Soil Loss Ratio* = 23.26
Shear: 1.33 psf for 30 min. Soil Loss = 86.7 gShear: 1.94 psf for 30 min. Soil Loss = 156.7 gShear: 2.56 psf for 30 min. Soil Loss = 370.0 g
2.76 psf @ ½-in soil loss
= 501%
Plant Name:
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Plant Address:City/State/Zip:
Plant Contact:
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
ASTM D 6475 - Mass per Unit Area
Biodegradable double net coconut temporaryerosion control blanket.
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Test ResultParameters
Test Results
100% Organic @ 1.5 in. transverse stitchspacing
Organic leno weave jute top and bottom netseach with 0.5 x 1.0 inch rectangular openings
Test Method - Description
52
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-037
Product Identification: ECX-1
Description:
Netting:
Matrix/Fill: 100% wood fiber
Stitching:
7.86 oz/sq.yd.10.4 lb/in @ % 27.76.0 lb/in @ % 28.9
374 mils63.7 % / % 36.3
184 %Soil Loss Ratio* = 3.98Soil Loss Ratio* = 3.64Soil Loss Ratio* = 3.32
Shear: 0.88 psf for 30 min. Soil Loss = 166.7 gShear: 1.99 psf for 30 min. Soil Loss = 846.7 gShear: 3.27 psf for 30 min. Soil Loss = 1655.0 g
1.72 psf @ ½-in soil loss
= 519%(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Test ResultParameters
Test Results
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
Single net excelsior temporary erosion controlblanket
100% Synthetic @ 1.5 in. transverse stitchspacing
Synthetic top net with 0.5 inch square openings
53
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-038
Product Identification: ECX-2
Description:
Netting:
Matrix/Fill: 100% wood fiber
Stitching:
10.18 oz/sq.yd.16.1 lb/in @ % 29.86.4 lb/in @ % 25.4
327 mils65.3 % / % 34.7
171 %Soil Loss Ratio* = 6.70Soil Loss Ratio* = 5.17Soil Loss Ratio* = 3.99
Shear: 0.88 psf for 30 min. Soil Loss = 76.7 gShear: 1.68 psf for 30 min. Soil Loss = 353.3 gShear: 3.27 psf for 30 min. Soil Loss = 1251.7 g
2.24 psf @ ½-in soil loss
= 530%(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Test Result
100% Synthetic @ 1.5 in. transverse stitchspacing
Synthetic top and bottom nets (each with 0.5inch square openings)
Parameters
Test Results
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
Double net excelsior temporary erosion controlblanket
54
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-039
Product Identification: ECP-2
Description:
Netting:
Matrix/Fill: 100 % green polypropylene
Stitching:
12.16 oz/sq.yd.24.4 lb/in @ % 25.626.5 lb/in @ % 30.5
378 mils85.0 % / % 15.0
0.919 g/cm3Soil Loss Ratio* = 5.54Soil Loss Ratio* = 5.38Soil Loss Ratio* = 5.22
Shear: 1.42 psf for 30 min. Soil Loss = 83.3 gShear: 2.75 psf for 30 min. Soil Loss = 433.3 gShear: 3.42 psf for 30 min. Soil Loss = 1195.0 g
2.72 psf @ ½-in soil loss
= 469%
Index Test
Manufacturer: Plant Name:
Corporate Address: Plant Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Plant Contact:Corporate Contact:
City/State/Zip:City/State/Zip:
Parameters
Index Test
Index Test
Synthetic top and bottom nets (each with 0.5inch square openings)
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ECTC Method 3 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ECTC Draft Method 4 - Determination of TemporaryDegradable RECP Performance in Encouraging SeedGermination and Plant Growth
ECTC Method 2 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Double-netted synthetic permanent turfreinforcement mat
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
100% UV stabilized synthetic @ 1.5 in.transverse stitch spacing
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
55
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-010
Product Identification: ECP-2 10
Description:
Netting:
Matrix/Fill: 100 % green polypropylene
Stitching:
10.07 oz/sq.yd.30.0 lb/in @ % 29.329.8 lb/in @ % 29.2
433 mils86.9 % / % 13.1
0.909 g/cm3Soil Loss Ratio* = 4.23Soil Loss Ratio* = 5.46Soil Loss Ratio* = 7.06
Shear: 1.51 psf for 30 min. Soil Loss = 141.7 gShear: 2.06 psf for 30 min. Soil Loss = 478.3 gShear: 2.73 psf for 30 min. Soil Loss = 571.7 g
2.36 psf @ ½-in soil loss
= 427%
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
Double-netted synthetic permanent turfreinforcement mat
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
100% UV stabilized synthetic @ 1.5 in.transverse stitch spacing
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ECTC Method 3 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ECTC Draft Method 4 - Determination of TemporaryDegradable RECP Performance in Encouraging SeedGermination and Plant Growth
ECTC Method 2 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index Test
Manufacturer: Plant Name:
Corporate Address: Plant Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Plant Contact:Corporate Contact:
City/State/Zip:City/State/Zip:
Parameters
Index Test
Index Test
Synthetic top and bottom nets (each with 0.5inch square openings)
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
56
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-011
Product Identification: ECP-3
Description:
Netting:
Matrix/Fill: 100 % green polypropylene
Stitching:
18.85 oz/sq.yd.76.2 lb/in @ % 26.9101.7 lb/in @ % 16.5
382 mils84.0 % / % 16.0
0.906 g/cm3Soil Loss Ratio* = 6.49Soil Loss Ratio* = 5.40Soil Loss Ratio* = 4.50
Shear: 2.75 psf for 30 min. Soil Loss = 208.3 gShear: 3.57 psf for 30 min. Soil Loss = 351.7 gShear: 4.41 psf for 30 min. Soil Loss = 633.3 g
3.91 psf @ ½-in soil loss
= 431%
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
Synthetic top, center and bottom nets
100% UV stabilized synthetic @ 1.5 in.transverse stitch spacing
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ECTC Method 3 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ECTC Draft Method 4 - Determination of TemporaryDegradable RECP Performance in Encouraging SeedGermination and Plant Growth
ECTC Method 2 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index Test
Manufacturer: Plant Name:
Corporate Address: Plant Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Plant Contact:Corporate Contact:
City/State/Zip:City/State/Zip:
Parameters
Index Test
Index Test
Tripple-netted synthetic permanent turfreinforcement mat
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
57
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-012
Product Identification: ECSC-3
Description:
Netting:
Matrix/Fill: 70% Straw / 30% Coconut
Stitching:
17.57 oz/sq.yd.60.7 lb/in @ % 15.365.7 lb/in @ % 17.0
394 mils93.5 % / % 6.5
0.909 g/cm3Soil Loss Ratio* = 15.55Soil Loss Ratio* = 12.96Soil Loss Ratio* = 10.80
Shear: 2.48 psf for 30 min. Soil Loss = 126.7 gShear: 3.24 psf for 30 min. Soil Loss = 385.0 gShear: 3.99 psf for 30 min. Soil Loss = 961.7 g
3.40 psf @ ½-in soil loss
= 425%
Index Test
Manufacturer: Plant Name:
Corporate Address: Plant Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Plant Contact:Corporate Contact:
City/State/Zip:City/State/Zip:
Parameters
Index Test
Index Test
Tripple-netted synthetic permanent turfreinforcement mat
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ECTC Method 3 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ECTC Draft Method 4 - Determination of TemporaryDegradable RECP Performance in Encouraging SeedGermination and Plant Growth
ECTC Method 2 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
Synthetic top, center and bottom nets
100% UV stabilized synthetic @ 1.5 in.transverse stitch spacing
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
58
East Coast Erosion Blankets East Coast Erosion Blankets
443 Bricker Road 443 Bricker RoadBernville, PA 19506 Bernville, PA 19506
Diane Hitt Diane HittPhone: 610-488-8496 Phone: 610-488-8496Fax: 610-488-8494 Fax: 610-488-8494E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-04-005
Product Identification:
Description:
Netting: N/A
Matrix/Fill: N/A
Stitching: N/A
10.12 oz/sq.yd.304.6 lb/in @ % 38.9258.5 lb/in @ % 14.9
502 mils74.3 % / % 25.7
0.906 g/cm3Soil Loss Ratio* = 3.22Soil Loss Ratio* = 3.86Soil Loss Ratio* = 4.63
Shear: 2.47 psf for 30 min. Soil Loss = 375.0 gShear: 3.27 psf for 30 min. Soil Loss = 441.7 gShear: 4.06 psf for 30 min. Soil Loss = 535.0 g
3.30 psf @ ½-in soil loss
= 310%
City/State/Zip:
A high-performance turf reinforcement mat. Theproduct is a three dimensional cross directionalweave of monofilament polyproylene fibers
Index Test
Manufacturer:
Corporate Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Corporate Contact:
City/State/Zip:
Parameters
Index Test
Index Test
Test Results
ASTM D 6525 – Thickness
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECP Abilityto Protect Soil from Hydraulically-Induced Shear StressesUnder Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECP Abilityto Protect Soil From Rain Splash and Associated RunoffUnder Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index Test
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
TRECS
Plant Address:
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
Plant Contact:
Plant Name:
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
59
Ero-Guard, Inc Ero-Guard, Inc
731 Prior Ave North 412 Hwy 22 SouthSaint Paul, MN 55104 Mapleton, MN 56065
Brian Dingels Brian DingelsPhone: 612-382-2783 Phone: 612-382-2783Fax: 651-917-0111 Fax: 651-917-0111E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2014-01-003
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
8.19 oz/sq.yd.9.4 lb/in @ % 13.17.2 lb/in @ % 19.3
320 mils85.8 % / % 14.2
400 %Soil Loss Ratio* = 10.65Soil Loss Ratio* = 11.01Soil Loss Ratio* = 11.38
Shear: 1.26 psf for 30 min. Soil Loss = 215.0 gShear: 1.82 psf for 30 min. Soil Loss = 523.3 gShear: 2.39 psf for 30 min. Soil Loss = 911.7 g
1.79 psf @ ½-in soil loss
= 630%
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
ASTM D 6818 – Ultimate Tensile Strength / Strain -
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Single biodegradable net temporary strawerosion control blanket
Biodegradable top net with 1.0 x 0.5 inchrectangular openings
ASTM D 6475 - Mass per Unit Area
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
- TDASTM D 6525 – Thickness
Index Test
EG-1s (NN)
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Test ResultIndex Test
Parameters
Test Results
100% organic @ 1.5 in. transverse stitchspacing
Index Test
Test Method - Description
60
Ero-Guard, Inc Ero-Guard, Inc
731 Prior Ave North 412 Hwy 22 SouthSaint Paul, MN 55104 Mapleton, MN 56065
Brian Dingels Brian DingelsPhone: 612-382-2783 Phone: 612-382-2783Fax: 651-917-0111 Fax: 651-917-0111E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2014-01-004
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
9.52 oz/sq.yd.16.6 lb/in @ % 13.414.8 lb/in @ % 13.5
317 mils92.3 % / % 7.7
389 %Soil Loss Ratio* = 12.23Soil Loss Ratio* = 17.29Soil Loss Ratio* = 24.44
Shear: 1.82 psf for 30 min. Soil Loss = 260.0 gShear: 2.39 psf for 30 min. Soil Loss = 586.7 gShear: 2.96 psf for 30 min. Soil Loss = 1195.0 g
2.22 psf @ ½-in soil loss
= 655%
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
ASTM D 6818 – Ultimate Tensile Strength / Strain -
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Double biodegradable net temporary strawerosion control blanket
Biodegradable top and bottom nets each with 1.0x 0.5 inch rectangular openings
ASTM D 6475 - Mass per Unit AreaTest Method - Description
- TDASTM D 6525 – Thickness
Index Test
EG-2s (NN)
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Test ResultIndex Test
Parameters
Test Results
100% organic @ 1.5 in. transverse stitchspacing
61
Enviroscape ECM Enviroscape ECM
22700 SR-613 22700 SR-613Oakwood, OH 45873 Oakwood, OH 45873
Mark Deitering Mark DeiteringPhone: 419-594-3210 Phone: 419-594-3210Fax: 419-594-3213 Fax: 419-594-3213E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-04-016
Product Identification:
Description:
Netting:
Matrix/Fill: 70% straw / 30% coconut
Stitching:
8.18 oz/sq.yd.13.5 lb/in @ % 31.812.1 lb/in @ % 27.8
253 mils86.7 % / % 13.3
404 %Soil Loss Ratio* = 10.57Soil Loss Ratio* = 10.21Soil Loss Ratio* = 9.86
Shear: 1.35 psf for 30 min. Soil Loss = 188.3 gShear: 2.11 psf for 30 min. Soil Loss = 625.0 gShear: 2.75 psf for 30 min. Soil Loss = 973.3 g
2.01 psf @ ½-in soil loss
= 321%(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
City/State/Zip:
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
Test Results
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:
SC3000
Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:
Test ResultParameters
100% synthetic @ 1.5 in. transverse stitchspacing
Synthetic top and bottom nets each with 0.5 inchsquare openings
Double net straw/coconut temporary erosioncontrol blanket.
62
Enviroscape ECM Enviroscape ECM
22700 SR-613 22700 SR-613Oakwood, OH 45873 Oakwood, OH 45873
Mark Deitering Mark DeiteringPhone: 419-594-3210 Phone: 419-594-3210Fax: 419-594-3213 Fax: 419-594-3213E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-04-017
Product Identification:
Description:
Netting:
Matrix/Fill: 100% coconut
Stitching:
7.24 oz/sq.yd.20.6 lb/in @ % 40.018.5 lb/in @ % 29.1
237 mils85.8 % / % 14.2
316 %Soil Loss Ratio* = 9.50Soil Loss Ratio* = 11.43Soil Loss Ratio* = 13.76
Shear: 1.31 psf for 30 min. Soil Loss = 148.3 gShear: 1.99 psf for 30 min. Soil Loss = 283.3 gShear: 2.65 psf for 30 min. Soil Loss = 380.0 g
2.81 psf @ ½-in soil loss
= 461%
Test ResultParameters
100% synthetic @ 1.5 in. transverse stitchspacing
Synthetic top and bottom nets each with 0.5 inchsquare openings
Double net coconut temporary erosion controlblanket.
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
Test Results
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:
C4000
Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
63
Enviroscape ECM Enviroscape ECM
22700 SR-613 22700 SR-613Oakwood, OH 45873 Oakwood, OH 45873
Mark Deitering Mark DeiteringPhone: 419-594-3210 Phone: 419-594-3210Fax: 419-594-3213 Fax: 419-594-3213E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-04-001
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
8.26 oz/sq.yd.11.9 lb/in @ % 27.46.5 lb/in @ % 26.2
310 mils68.7 % / % 31.3
386 %Soil Loss Ratio* = 4.83Soil Loss Ratio* = 5.39Soil Loss Ratio* = 6.02
Shear: 1.46 psf for 30 min. Soil Loss = 306.7 gShear: 2.01 psf for 30 min. Soil Loss = 625.0 gShear: 3.25 psf for 30 min. Soil Loss = 2485.0 g
1.77 psf @ ½-in soil loss
= 540%
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
Double net temporary straw erosion controlblanket
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
S2000
Parameters
Test Results
100% Synthetic @ 1.5 in. transverse stitchspacing
Synthetic top and bottom nets each with 0.5 inchsquare openings
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
64
Enviroscape ECM Enviroscape ECM
22700 SR-613 22700 SR-613Oakwood, OH 45873 Oakwood, OH 45873
Mark Deitering Mark DeiteringPhone: 419-594-3210 Phone: 419-594-3210Fax: 419-594-3213 Fax: 419-594-3213E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-04-002
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
7.57 oz/sq.yd.17.7 lb/in @ % 13.513.1 lb/in @ % 18.8
269 mils67.2 % / % 32.8
370 %Soil Loss Ratio* = 5.13Soil Loss Ratio* = 6.51Soil Loss Ratio* = 8.26
Shear: 0.78 psf for 30 min. Soil Loss = 21.7 gShear: 1.46 psf for 30 min. Soil Loss = 500.0 gShear: 2.01 psf for 30 min. Soil Loss = 893.3 g
1.66 psf @ ½-in soil loss
= 383%
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
100% Organic @ 1.5 in. transverse stitchspacing
Biodegradable top and bottom nets each with 0.5inch square openings
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
Double biodegradable net temporary strawerosion control blanket
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
S2000BD
65
ErosionControlBlanket.com ErosionControlBlanket.com
P.O. Box 69 Highway 9 and Vidir Line RoadRiverton, Manitoba Riverton, ManitobaCanada, R0C 2R0 Canada, R0C 2R0
Mark Myrowich Mark MyrowichPhone: 204-797-3797 Phone: 204-797-3797Fax: Not Provided Fax: Not ProvidedE-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-01-009
Product Identification: SC32
Description:
Netting:
Matrix/Fill: 70% Straw / 30% Coconut
Stitching:
9.05 oz/sq.yd.22.1 lb/in @ % 22.812.9 lb/in @ % 21.3
256 mils82.0 % / % 18.0
432 %Soil Loss Ratio* = 9.83Soil Loss Ratio* = 11.93Soil Loss Ratio* = 14.49
Shear: 1.33 psf for 30 min. Soil Loss = 190.0 gShear: 1.94 psf for 30 min. Soil Loss = 460.0 gShear: 2.56 psf for 30 min. Soil Loss = 461.7 g
2.32 psf @ ½-in soil loss
= 586%
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Test ResultParameters
Test Results
Double-netted extended term straw/coconuterosion control blanket
Synthetic top net with 0.626 inch squareopenings and bottom net with 0.588 x 0.5 inchrectangular openings
Plant Contact:
City/State/Zip:
Plant Name:
Plant Address:
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index Test
100% synthetic @ 1.5 in. transverse stitchspacing
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
ASTM D 6475 - Mass per Unit AreaTest Method - Description
66
ErosionControlBlanket.com ErosionControlBlanket.com
P.O. Box 69 Highway 9 and Vidir Line RoadRiverton, Manitoba Riverton, ManitobaCanada, R0C 2R0 Canada, R0C 2R0
Mark Myrowich Mark MyrowichPhone: 204-797-3797 Phone: 204-797-3797Fax: Not Provided Fax: Not ProvidedE-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-01-010
Product Identification: S31
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
8.14 oz/sq.yd.8.6 lb/in @ % 29.64.3 lb/in @ % 26.4
286 mils76.0 % / % 24.0
510 %Soil Loss Ratio* = 7.89Soil Loss Ratio* = 6.03Soil Loss Ratio* = 4.60
Shear: 0.69 psf for 30 min. Soil Loss = 198.3 gShear: 1.26 psf for 30 min. Soil Loss = 440.0 gShear: 1.82 psf for 30 min. Soil Loss = 630.0 g
1.42 psf @ ½-in soil loss
= 271%
Test ResultParameters
Test Results
Single net temporary straw erosion controlblanket
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Contact:
City/State/Zip:
Plant Name:
Plant Address:
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index Test
Synthetic top net with 0.588 x 0.5 inchrectangular openings
100% synthetic @ 1.5 in. transverse stitchspacing
Test Method - Description
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
ASTM D 6475 - Mass per Unit AreaASTM D 6818 – Ultimate Tensile Strength / Strain -
- TDASTM D 6525 – Thickness
Index Test
Index Test
67
ErosionControlBlanket.com ErosionControlBlanket.com
P.O. Box 69 Highway 9 and Vidir Line RoadRiverton, Manitoba Riverton, ManitobaCanada, R0C 2R0 Canada, R0C 2R0
Mark Myrowich Mark MyrowichPhone: 204-797-3797 Phone: 204-797-3797Fax: Not Provided Fax: Not ProvidedE-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-01-011
Product Identification: S31UVD
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
8.37 oz/sq.yd.8.9 lb/in @ % 25.25.5 lb/in @ % 25.3
253 mils84.4 % / % 15.6
542 %Soil Loss Ratio* = 7.45Soil Loss Ratio* = 5.09Soil Loss Ratio* = 3.48
Shear: 1.26 psf for 30 min. Soil Loss = 320.0 gShear: 1.82 psf for 30 min. Soil Loss = 721.7 gShear: 2.39 psf for 30 min. Soil Loss = 1818.3 g
1.49 psf @ ½-in soil loss
= 292%
City/State/Zip:
Test ResultParameters
Test Results
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Contact:
City/State/Zip:
Plant Name:
Plant Address:
Manufacturer:
Corporate Contact:
Corporate Address:
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index Test
100% synthetic @ 1.5 in. transverse stitchspacing
Single net ultra short-term temporary strawerosion control blanket
Rapid photodegradable synthetic top net with0.588 x 0.5 inch rectangular openings
Test Method - Description
ASTM D 6475 - Mass per Unit AreaASTM D 6818 – Ultimate Tensile Strength / Strain -
- TDASTM D 6525 – Thickness
Index Test
Index Test
68
ErosionControlBlanket.com ErosionControlBlanket.com
P.O. Box 69 Highway 9 and Vidir Line RoadRiverton, Manitoba Riverton, ManitobaCanada, R0C 2R0 Canada, R0C 2R0
Mark Myrowich Mark MyrowichPhone: 204-797-3797 Phone: 204-797-3797Fax: Not Provided Fax: Not ProvidedE-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-01-012
Product Identification: S32UVD
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
7.99 oz/sq.yd.13.2 lb/in @ % 22.97.7 lb/in @ % 25.9
259 mils80.1 % / % 19.9
486 %Soil Loss Ratio* = 6.62Soil Loss Ratio* = 6.67Soil Loss Ratio* = 6.72
Shear: 1.26 psf for 30 min. Soil Loss = 325.0 gShear: 1.60 psf for 30 min. Soil Loss = 460.0 gShear: 1.82 psf for 30 min. Soil Loss = 710.0 g
1.53 psf @ ½-in soil loss
= 332%
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Index Test
Rapid photodegradable synthetic top and bottomnets each with 0.588 x 0.5 inch rectangularopenings
100% synthetic @ 1.5 in. transverse stitchspacing
Test Method - Description
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
ASTM D 6475 - Mass per Unit Area
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Test ResultParameters
Test Results
Double net ultra short-term temporary strawerosion control blanket
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Contact:
City/State/Zip:
Plant Name:
Plant Address:
69
ErosionControlBlanket.com ErosionControlBlanket.com
P.O. Box 69 Highway 9 and Vidir Line RoadRiverton, Manitoba Riverton, ManitobaCanada, R0C 2R0 Canada, R0C 2R0
Mark Myrowich Mark MyrowichPhone: 204-797-3797 Phone: 204-797-3797Fax: Not Provided Fax: Not ProvidedE-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-01-013
Product Identification: SC32BD
Description:
Netting:
Matrix/Fill: 70% Straw / 30% Coconut
Stitching:
9.27 oz/sq.yd.15.3 lb/in @ % 15.55.7 lb/in @ % 15.1
245 mils87.5 % / % 12.5
492 %Soil Loss Ratio* = 10.39Soil Loss Ratio* = 12.12Soil Loss Ratio* = 14.14
Shear: 1.33 psf for 30 min. Soil Loss = 81.7 gShear: 1.94 psf for 30 min. Soil Loss = 403.3 gShear: 2.56 psf for 30 min. Soil Loss = 530.0 g
2.31 psf @ ½-in soil loss
= 763%
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Test ResultParameters
Test Results
Biodegradable double net straw/coconuttemporary erosion control blanket.
Leno woven biodegradable jute top and bottomnets each with 1 inch x 0.5 inch rectangularopenings
Plant Contact:
City/State/Zip:
Plant Name:
Plant Address:
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index Test
100% cotton @ 1.5 in. transverse stitch spacing
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
ASTM D 6475 - Mass per Unit AreaTest Method - Description
70
ErosionControlBlanket.com ErosionControlBlanket.com
P.O. Box 69 Highway 9 and Vidir Line RoadRiverton, Manitoba Riverton, ManitobaCanada, R0C 2R0 Canada, R0C 2R0
Mark Myrowich Mark MyrowichPhone: 204-797-3797 Phone: 204-797-3797Fax: Not Provided Fax: Not ProvidedE-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-01-014
Product Identification: C32BD
Description:
Netting:
Matrix/Fill: 100% Coconut Fiber
Stitching:
8.26 oz/sq.yd.13.1 lb/in @ % 12.414.8 lb/in @ % 15.9
266 mils84.5 % / % 15.5
379 %Soil Loss Ratio* = 10.87Soil Loss Ratio* = 13.34Soil Loss Ratio* = 16.37
Shear: 2.63 psf for 30 min. Soil Loss = 351.7 gShear: 2.90 psf for 30 min. Soil Loss = 420.0 gShear: 3.30 psf for 30 min. Soil Loss = 544.3 g
3.01 psf @ ½-in soil loss
= 507%
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Index Test
Biodegradable double net coconut temporaryerosion control blanket.
Leno woven biodegradable jute top and bottomnets each with 1 inch x 0.5 inch rectangularopenings
100% cotton @ 1.5 in. transverse stitch spacing
Test Method - Description
ASTM D 6475 - Mass per Unit Area
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
City/State/Zip:
Test ResultParameters
Test Results
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Contact:
City/State/Zip:
Plant Name:
Plant Address:
Manufacturer:
Corporate Contact:
Corporate Address:
71
ErosionControlBlanket.com ErosionControlBlanket.com
P.O. Box 69 Highway 9 and Vidir Line RoadRiverton, Manitoba Riverton, ManitobaCanada, R0C 2R0 Canada, R0C 2R0
Mark Myrowich Mark MyrowichPhone: 204-797-3797 Phone: 204-797-3797Fax: Not Provided Fax: Not ProvidedE-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-01-015
Product Identification: S31BD
Description:
Netting:
Matrix/Fill: 100% Agricultural Straw
Stitching:
7.53 oz/sq.yd.10.8 lb/in @ % 11.94.8 lb/in @ % 15.5
237 mils75.3 % / % 24.7
425 %Soil Loss Ratio* = 8.01Soil Loss Ratio* = 6.96Soil Loss Ratio* = 6.06
Shear: 0.69 psf for 30 min. Soil Loss = 133.3 gShear: 1.26 psf for 30 min. Soil Loss = 430.0 gShear: 1.82 psf for 30 min. Soil Loss = 586.7 g
1.51 psf @ ½-in soil loss
= 439%
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Index Test
Biodegradable single net straw temporaryerosion control blanket.
Leno woven biodegradable jute top net with 1inch x 0.5 inch rectangular openings
100% cotton @ 1.5 in. transverse stitch spacing
Test Method - Description
ASTM D 6475 - Mass per Unit Area
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
City/State/Zip:
Test ResultParameters
Test Results
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Contact:
City/State/Zip:
Plant Name:
Plant Address:
Manufacturer:
Corporate Contact:
Corporate Address:
72
ErosionControlBlanket.com ErosionControlBlanket.com
P.O. Box 69 Highway 9 and Vidir Line RoadRiverton, Manitoba Riverton, ManitobaCanada, R0C 2R0 Canada, R0C 2R0
Mark Myrowich Mark MyrowichPhone: 204-797-3797 Phone: 204-797-3797Fax: Not Provided Fax: Not ProvidedE-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-01-016
Product Identification: S32BD
Description:
Netting:
Matrix/Fill: 100% Agricultural Straw
Stitching:
9.00 oz/sq.yd.15.8 lb/in @ % 11.212.3 lb/in @ % 15.7
247 mils82.8 % / % 17.2
428 %Soil Loss Ratio* = 9.76Soil Loss Ratio* = 11.85Soil Loss Ratio* = 14.38
Shear: 1.26 psf for 30 min. Soil Loss = 245.0 gShear: 1.54 psf for 30 min. Soil Loss = 320.0 gShear: 1.82 psf for 30 min. Soil Loss = 498.3 g
1.77 psf @ ½-in soil loss
= 365%
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Index Test
Biodegradable double net straw temporaryerosion control blanket.
Leno woven biodegradable jute top and bottomnets each with 1 inch x 0.5 inch rectangularopenings
100% cotton @ 1.5 in. transverse stitch spacing
Test Method - Description
ASTM D 6475 - Mass per Unit Area
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
City/State/Zip:
Test ResultParameters
Test Results
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Contact:
City/State/Zip:
Plant Name:
Plant Address:
Manufacturer:
Corporate Contact:
Corporate Address:
73
ErosionControlBlanket.com ErosionControlBlanket.com
Box 69 Highway 9 and Vidir Line RdRiverton, Manitoba Riverton, ManitobaCanada, R0C 2R0 Canada, R0C 2R0
Mark Myrowich Mark MyrowichPhone: 866-280-7327 Phone: 866-280-7327Fax: 866-757-7327 Fax: 866-757-7327E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-001
Product Identification: S32
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
7.06 oz/sq.yd.12.9 lb/in @ % 28.59.2 lb/in @ % 23.3
227 mils79.5 % / % 20.5
407 %Soil Loss Ratio* = 6.39Soil Loss Ratio* = 6.73Soil Loss Ratio* = 7.09
Shear: 0.80 psf for 30 min. Soil Loss = 131.7 gShear: 1.37 psf for 30 min. Soil Loss = 321.7 gShear: 1.94 psf for 30 min. Soil Loss = 1733.3 g
1.41 psf @ ½-in soil loss
= 390%
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Test Result
Double net straw temporary erosion controlblanket
100% Synthetic @ 1.5 in. transverse stitchspacing
Synthetic top and bottom nets each with 0.5 inchsquare openings
Parameters
Test Results
Manufacturer: Plant Name:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:Corporate Contact:
74
ErosionControlBlanket.com ErosionControlBlanket.com
Box 69 Highway 9 and Vidir Line RdRiverton, Manitoba Riverton, ManitobaCanada, R0C 2R0 Canada, R0C 2R0
Mark Myrowich Mark MyrowichPhone: 866-280-7327 Phone: 866-280-7327Fax: 866-757-7327 Fax: 866-757-7327E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-002
Product Identification: PS42 TRM
Description:
Netting:
Matrix/Fill: 70% polypropylene / 30% straw
Stitching:
8.68 oz/sq.yd.35.0 lb/in @ % 26.522.5 lb/in @ % 22.8
222 mils77.7 % / % 22.3
0.918 g/cm3Soil Loss Ratio* = 6.36Soil Loss Ratio* = 6.15Soil Loss Ratio* = 5.95
Shear: 0.77 psf for 30 min. Soil Loss = 81.7 gShear: 2.11 psf for 30 min. Soil Loss = 411.7 gShear: 2.81 psf for 30 min. Soil Loss = 888.3 g
2.21 psf @ ½-in soil loss
= 556%
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
UV Stabilized top and bottom nets each with 0.5in square openings
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
Index Test
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ECTC Method 3 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ECTC Draft Method 4 - Determination of TemporaryDegradable RECP Performance in Encouraging SeedGermination and Plant Growth
ECTC Method 2 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Manufacturer: Plant Name:
Corporate Address: Plant Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Plant Contact:Corporate Contact:
City/State/Zip:City/State/Zip:
Parameters
Index Test
Index Test
Double-netted permanent turf reinforcement matwith polypropylene and straw fiber fill
100% Synthetic (Carbon black) @ 1.5 in.transverse stitch spacing
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
75
ErosionControlBlanket.com ErosionControlBlanket.com
Box 69 Highway 9 and Vidir Line RdRiverton, Manitoba Riverton, ManitobaCanada, R0C 2R0 Canada, R0C 2R0
Mark Myrowich Mark MyrowichPhone: 866-280-7327 Phone: 866-280-7327Fax: 866-757-7327 Fax: 866-757-7327E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-003
Product Identification: PC42 TRM
Description:
Netting:
Matrix/Fill: 70% polypropylene / 30% coconut
Stitching:
10.77 oz/sq.yd.30.8 lb/in @ % 27.616.7 lb/in @ % 20.1
228 mils74.1 % / % 25.9
0.919 g/cm3Soil Loss Ratio* = 10.88Soil Loss Ratio* = 10.03Soil Loss Ratio* = 9.26
Shear: 1.42 psf for 30 min. Soil Loss = 96.7 gShear: 2.11 psf for 30 min. Soil Loss = 268.3 gShear: 2.81 psf for 30 min. Soil Loss = 521.7 g
2.64 psf @ ½-in soil loss
= 479%
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
UV Stabilized top and bottom nets each with 0.5in square openings
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
Index Test
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ECTC Method 3 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ECTC Draft Method 4 - Determination of TemporaryDegradable RECP Performance in Encouraging SeedGermination and Plant Growth
ECTC Method 2 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Manufacturer: Plant Name:
Corporate Address: Plant Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Plant Contact:Corporate Contact:
City/State/Zip:City/State/Zip:
Parameters
Index Test
Index Test
Double-netted permanent turf reinforcement matwith polypropylene and coconut fiber fill
100% Synthetic (Carbon black) @ 1.5 in.transverse stitch spacing
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
76
ErosionControlBlanket.com ErosionControlBlanket.com
Box 69 Highway 9 and Vidir Line RdRiverton, Manitoba Riverton, ManitobaCanada, R0C 2R0 Canada, R0C 2R0
Mark Myrowich Mark MyrowichPhone: 866-280-7327 Phone: 866-280-7327Fax: 866-757-7327 Fax: 866-757-7327E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-005
Product Identification: P42 TRM
Description:
Netting:
Matrix/Fill: 100% polypropylene
Stitching:
7.23 oz/sq.yd.28.2 lb/in @ % 21.422.6 lb/in @ % 21.0
170 mils61.6 % / % 38.4
0.919 g/cm3Soil Loss Ratio* = 4.74Soil Loss Ratio* = 4.09Soil Loss Ratio* = 3.52
Shear: 0.77 psf for 30 min. Soil Loss = 83.3 gShear: 2.11 psf for 30 min. Soil Loss = 338.3 gShear: 2.81 psf for 30 min. Soil Loss = 1588.3 g
2.07 psf @ ½-in soil loss
= 375%
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
UV Stabilized top and bottom nets each with 0.5in square openings
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
Index Test
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ECTC Method 3 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ECTC Draft Method 4 - Determination of TemporaryDegradable RECP Performance in Encouraging SeedGermination and Plant Growth
ECTC Method 2 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Manufacturer: Plant Name:
Corporate Address: Plant Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Plant Contact:Corporate Contact:
City/State/Zip:City/State/Zip:
Parameters
Index Test
Index Test
Double-netted permanent turf reinforcement matwith polypropylene fiber fill
100% Synthetic (Carbon black) @ 1.5 in.transverse stitch spacing
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
77
ErosionControlBlanket.com ErosionControlBlanket.com
Box 69 Highway 9 and Vidir Line RdRiverton, Manitoba Riverton, ManitobaCanada, R0C 2R0 Canada, R0C 2R0
Mark Myrowich Mark MyrowichPhone: 866-280-7327 Phone: 866-280-7327Fax: 866-757-7327 Fax: 866-757-7327E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-006
Product Identification: C32
Description:
Netting:
Matrix/Fill: 100% Coconut
Stitching:
7.03 oz/sq.yd.21.9 lb/in @ % 27.715.6 lb/in @ % 20.8
159 mils75.9 % / % 24.1
258 %Soil Loss Ratio* = 10.31Soil Loss Ratio* = 12.78Soil Loss Ratio* = 15.85
Shear: 2.06 psf for 30 min. Soil Loss = 241.7 gShear: 2.60 psf for 30 min. Soil Loss = 411.7 gShear: 3.40 psf for 30 min. Soil Loss = 1905.0 g
2.53 psf @ ½-in soil loss
= 466%
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Test ResultParameters
Test Results
Manufacturer: Plant Name:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:Corporate Contact:
Double net coconut temporary erosion controlblanket
UV stabilized photodegradable thread @ 1.5 in.transverse stitch spacing
UV Stabilized synthetic top and bottom nets eachwith 0.5 inch square openings
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
78
Erosion Tech Erosion Tech
105 Plant Camelia Road 105 Plant Camelia RoadJuliette, GA 31046 Juliette, GA 31046
Josh Still Josh StillPhone: 478-994-6009 Phone: 478-994-6009Fax: 478-994-3001 Fax: 478-994-3001E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-010
Product Identification: ETSC-70-30
Description:
Netting:
Matrix/Fill: 70% straw / 30% coconut
Stitching:
7.79 oz/sq.yd.19.2 lb/in @ % 24.410.4 lb/in @ % 27.6
175 mils77.8 % / % 22.2
484 %Soil Loss Ratio* = 14.04Soil Loss Ratio* = 14.13Soil Loss Ratio* = 14.21
Shear: 1.38 psf for 30 min. Soil Loss = 186.7 gShear: 1.99 psf for 30 min. Soil Loss = 391.7 gShear: 2.61 psf for 30 min. Soil Loss = 995.0 g
2.05 psf @ ½-in soil loss
= 510%(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
Double net straw/coconut temporary erosioncontrol blanket.
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
100% synthetic @ 2.0 in. transverse stitchspacing
Heavy duty UV stabilized black top net andmedium weight green synthetic bottom net eachwith 3/8 inch square openings
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
79
Erosion Tech Erosion Tech
105 Plant Camelia Road 105 Plant Camelia RoadJuliette, GA 31046 Juliette, GA 31046
Josh Still Josh StillPhone: 478-994-6009 Phone: 478-994-6009Fax: 478-994-3001 Fax: 478-994-3001E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-011
Product Identification: ETC-100
Description:
Netting:
Matrix/Fill: 100% coconut
Stitching:
8.91 oz/sq.yd.27.2 lb/in @ % 28.116.8 lb/in @ % 38.8
211 mils87.4 % / % 12.6
306 %Soil Loss Ratio* = 12.16Soil Loss Ratio* = 15.44Soil Loss Ratio* = 19.59
Shear: 2.06 psf for 30 min. Soil Loss = 223.3 gShear: 2.73 psf for 30 min. Soil Loss = 310.0 gShear: 3.40 psf for 30 min. Soil Loss = 1090.0 g
2.78 psf @ ½-in soil loss
= 533%(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Heavy Duty UV stabilized synthetic top andbottom nets each with 5/8 inch square openings
Double net coconut temporary erosion controlblanket.
Parameters
Test Results
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
100% synthetic @ 2.0 in. transverse stitchspacing
Index Test
80
Erosion Tech Erosion Tech
105 Plant Camelia Road 105 Plant Camelia RoadJuliette, GA 31046 Juliette, GA 31046
Josh Still Josh StillPhone: 478-994-6009 Phone: 478-994-6009Fax: 478-994-3001 Fax: 478-994-3001E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-040
Product Identification: ETX2-HV
Description:
Netting:
Matrix/Fill: 100% Excelsior Wood
Stitching:
11.12 oz/sq.yd.12.6 lb/in @ % 28.87.9 lb/in @ % 24.0
257 mils85.3 % / % 14.7
239 %Soil Loss Ratio* = 8.51Soil Loss Ratio* = 8.04Soil Loss Ratio* = 7.59
Shear: 1.64 psf for 30 min. Soil Loss = 198.3 gShear: 2.89 psf for 30 min. Soil Loss = 371.7 gShear: 3.99 psf for 30 min. Soil Loss = 1185.0 g
2.86 psf @ ½-in soil loss
= 558%(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Synthetic top and bottom nets
Double net excelsior temporary erosion controlblanket.
Parameters
Test Results
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
100% synthetic @ 2.0 in. transverse stitchspacing
Index Test
81
Erosion Tech Erosion Tech
105 Plant Camelia Road 105 Plant Camelia RoadJuliette, GA 31046 Juliette, GA 31046
Josh Still Josh StillPhone: 478-994-6009 Phone: 478-994-6009Fax: 478-994-3001 Fax: 478-994-3001E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-02-009
Product Identification: ETPP-10
Description:
Netting:
Matrix/Fill: 100% Crimped Polypropylene
Stitching:
12.06 oz/sq.yd.19.4 lb/in @ % 16.750.4 lb/in @ % 23.9
314 mils76.8 % / % 23.2
0.914 g/cm3Soil Loss Ratio* = 4.87Soil Loss Ratio* = 4.50Soil Loss Ratio* = 4.16
Shear: 2.06 psf for 30 min. Soil Loss = 378.3 gShear: 2.76 psf for 30 min. Soil Loss = 446.7 gShear: 3.47 psf for 30 min. Soil Loss = 1145.0 g
2.45 psf @ ½-in soil loss
= 683%
Index Test
Manufacturer:
Corporate Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Corporate Contact:
City/State/Zip:
Parameters
Index Test
Index Test
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
- TD
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECP Abilityto Protect Soil from Hydraulically-Induced Shear StressesUnder Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECP Abilityto Protect Soil From Rain Splash and Associated RunoffUnder Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
UV stabilized synthetic @ 2.0 in. transversestitch spacing
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
City/State/Zip:
Plant Name:
Plant Address:
Plant Contact:
Synthetic heavy duty UV stabilized top andbottom nets (each with 5/8 square openings)
Double-netted synthetic permanent turfreinforcement mat with polypropylene fiber fill
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
82
Erosion Tech Erosion Tech
105 Plant Camelia Road 105 Plant Camelia RoadJuliette, GA 31046 Juliette, GA 31046
Josh Still Josh StillPhone: 478-994-6009 Phone: 478-994-6009Fax: 478-994-3001 Fax: 478-994-3001E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-02-010
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Agricultural Wheat Straw
Stitching:
7.84 oz/sq.yd.7.0 lb/in @ % 25.84.8 lb/in @ % 22.8
314 mils94.1 % / % 5.9
464 %Soil Loss Ratio* = 6.42Soil Loss Ratio* = 6.95Soil Loss Ratio* = 7.52
Shear: 0.75 psf for 30 min. Soil Loss = 108.3 gShear: 1.35 psf for 30 min. Soil Loss = 413.3 gShear: 2.01 psf for 30 min. Soil Loss = 930.0 g
1.53 psf @ ½-in soil loss
= 655%
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Plant Address:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
City/State/Zip:
Plant Contact:
Plant Name:
UV Stabilized synthetic @ 2 in. transverse stitchspacing
Synthetic top net with 3/8 inch square openings
ETRS-1
Single net temporary straw erosion controlblanket
83
Erosion Tech Erosion Tech
105 Plant Camelia Road 105 Plant Camelia RoadJuliette, GA 31046 Juliette, GA 31046
Josh Still Josh StillPhone: 478-994-6009 Phone: 478-994-6009Fax: 478-994-3001 Fax: 478-994-3001E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-02-011
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Agricultural Wheat Straw
Stitching:
8.17 oz/sq.yd.9.8 lb/in @ % 27.37.9 lb/in @ % 30.2
227 mils94.3 % / % 5.7
532 %Soil Loss Ratio* = 7.16Soil Loss Ratio* = 9.24Soil Loss Ratio* = 11.92
Shear: 1.37 psf for 30 min. Soil Loss = 301.7 gShear: 2.05 psf for 30 min. Soil Loss = 601.7 gShear: 2.70 psf for 30 min. Soil Loss = 741.7 g
1.85 psf @ ½-in soil loss
= 723%
Plant Address:City/State/Zip:
Plant Contact:
Plant Name:
ETRS-2
Synthetic top and bottom nets (each with 0.5inch square openings)
Double-netted temporary straw erosion controlblanket
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
UV Stabilized synthetic @ 2 in. transverse stitchspacing
84
Erosion Tech Erosion Tech
105 Plant Camelia Road 105 Plant Camelia RoadJuliette, GA 31046 Juliette, GA 31046
Josh Still Josh StillPhone: 478-994-6009 Phone: 478-994-6009Fax: 478-994-3001 Fax: 478-994-3001E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2014-01-005
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
8.93 oz/sq.yd.21.0 lb/in @ % 12.613.3 lb/in @ % 13.1
257 mils93.2 % / % 6.8
418 %Soil Loss Ratio* = 15.14Soil Loss Ratio* = 14.43Soil Loss Ratio* = 13.76
Shear: 1.35 psf for 30 min. Soil Loss = 156.7 gShear: 1.89 psf for 30 min. Soil Loss = 581.7 gShear: 2.43 psf for 30 min. Soil Loss = 703.3 g
1.98 psf @ ½-in soil loss
= 556%
Plant Address:City/State/Zip:
Plant Contact:
Plant Name:
ETRS-2 BN
Biodegradable Leno Weave top and bottom nets
Double biodegradable net temporary strawerosion control blanket
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
100% Organic @ 2.0 in. transverse stitchspacing
85
Industrial Fabrics, Inc. Industrial Fabrics, Inc.
4604 Macks Drive 510 O,Neal LaneBossier City, LA 71111 Baton Rouge, LA 70819
William Hartman Jamie CollinsPhone: 318-741-5791 Phone: 225-273-9600Fax: 318-741-5792 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-01-008
Product Identification: Greensolutions SNS-1
Description:
Netting:
Matrix/Fill: 100 % Straw
Stitching:
7.03 oz/sq.yd.8.4 lb/in @ % 30.23.9 lb/in @ % 21.8
280 mils88.0 % / % 12.0
426 %Soil Loss Ratio* = 5.33Soil Loss Ratio* = 5.63Soil Loss Ratio* = 5.96
Shear: 1.26 psf for 30 min. Soil Loss = 285.0 gShear: 1.82 psf for 30 min. Soil Loss = 1206.7 gShear: 2.39 psf for 30 min. Soil Loss = 1396.7 g
1.43 psf @ ½-in soil loss
= 542%
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
50 mm (2 in.) / hr for 30 min.ASTM D 1117 & ECTC-TASC 00197 - Water Absorption Index Test
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
ASTM D 6567 - Ground Cover / Light Penetration Index Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
City/State/Zip:
Plant Name:
Plant Address:
Plant Contact:
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Synthetic top net with 3/8 inch x 3/8 inchopenings)
Single net straw temporary erosion controlblanket.
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index TestParameters
Test Results
100% synthetic @ 2.0 in. transverse stitchspacing
86
Industrial Fabrics, Inc. Industrial Fabrics, Inc.
4604 Macks Drive 510 O,Neal LaneBossier City, LA 71111 Baton Rouge, LA 70819
William Hartman Jamie CollinsPhone: 318-741-5791 Phone: 225-273-9600Fax: 318-741-5792 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-01-009
Product Identification: Greensolutions DNS-2
Description:
Netting:
Matrix/Fill: 100 % Straw
Stitching:
7.08 oz/sq.yd.14.7 lb/in @ % 25.17.8 lb/in @ % 20.5
200 mils84.8 % / % 15.2
422 %Soil Loss Ratio* = 5.22Soil Loss Ratio* = 6.65Soil Loss Ratio* = 8.47
Shear: 1.26 psf for 30 min. Soil Loss = 200.0 gShear: 1.82 psf for 30 min. Soil Loss = 518.3 gShear: 2.39 psf for 30 min. Soil Loss = 1710.0 g
1.71 psf @ ½-in soil loss
= 707%
Plant Contact:
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Test ResultIndex Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip: City/State/Zip:
Plant Name:
Plant Address:
100% synthetic @ 2.0 in. transverse stitchspacing
Synthetic top and bottom nets each with 3/8 inchx 3/8 inch openings
Double net straw temporary erosion controlblanket.
ASTM D 6475 - Mass per Unit AreaTest Method - Description
87
North American Green North American Green
5401 St. Wendel - Cynthia Rd. 5401 St. Wendel - Cynthia Rd.Poseyville, IN 47633 Poseyville, IN 47633
Jill Pack Deanna DixPhone: 800-722-2040 Phone: 800-722-2040Fax: 812-867-0247 Fax: 812-867-0247E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-01-019
Product Identification: SC250
Description:
Netting:
Matrix/Fill: 70% straw/30% coconut
Stitching:
15.88 oz/sq.yd.65.5 lb/in @ % 30.548.5 lb/in @ % 18.5
536 mils95.3 % / % 4.7
0.917 g/cm3Soil Loss Ratio* = 16.30Soil Loss Ratio* = 18.58Soil Loss Ratio* = 21.19
Shear: 3.12 psf for 30 min. Soil Loss = 165.0 gShear: 3.87 psf for 30 min. Soil Loss = 251.7 gShear: 4.72 psf for 30 min. Soil Loss = 461.7 g
4.71 psf @ ½-in soil loss
= 644%
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Triple-netted permanent turf reinforcement matwith coconut/straw fill
Manufacturer: Plant Name:
Corporate Address: Plant Address:
UV stabilized (2% carbon black) nets on top andbottom (each with 0.5 inch square openings) witha corrugated middle net
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
Index Test
Index Test
Index Test
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECP Abilityto Protect Soil from Hydraulically-Induced Shear StressesUnder Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECP Abilityto Protect Soil From Rain Splash and Associated RunoffUnder Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =
City/State/Zip:City/State/Zip:
Top soil; Fescue (Kentucky 31);21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Plant Contact:
UV stabilized polymer thread @ 1.5 in.transverse stitch spacing
Corporate Contact:
Index Test
Parameters
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
88
North American Green North American Green
5401 St. Wendel - Cynthia Rd. 5401 St. Wendel - Cynthia Rd.Poseyville, IN 47633 Poseyville, IN 47633
Jill Pack Deanna DixPhone: 800-722-2040 Phone: 800-722-2040Fax: 812-867-0247 Fax: 812-867-0247E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-03-011
Product Identification: SC150
Description:
Netting:
Matrix/Fill: 70% Straw, 30% Coconut
Stitching:
9.73 oz/sq.yd.13.9 lb/in @ % 38.017.4 lb/in @ % 35.2
265 mils86.4 % / % 13.6
372 %Soil Loss Ratio* = 13.56Soil Loss Ratio* = 13.37Soil Loss Ratio* = 13.17
Shear: 1.39 psf for 30 min. Soil Loss = 78.3 gShear: 2.02 psf for 30 min. Soil Loss = 553.3 gShear: 2.64 psf for 30 min. Soil Loss = 533.0 g
2.32 psf @ ½-in soil loss
= 463%(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
Extended-term photodegradable double netstraw/coconut erosion control blanket.
Test ResultParameters
Test Results
100% synthetic @ 1.5 in. transverse stitchspacing
Synthetic photodegradable polypropeleneheavyweight top and lightweight bottom netseach with 0.63 inch square openings
89
North American Green North American Green
5401 St. Wendel - Cynthia Rd. 5401 St. Wendel - Cynthia Rd.Poseyville, IN 47633 Poseyville, IN 47633
Jill Pack Deanna DixPhone: 800-722-2040 Phone: 800-722-2040Fax: 812-867-0247 Fax: 812-867-0247E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-04-001
Product Identification: SC150BN
Description:
Netting:
Matrix/Fill: 70% Straw, 30% Coconut
Stitching:
9.02 oz/sq.yd.14.9 lb/in @ % 11.611.7 lb/in @ % 12.4
304 mils89.9 % / % 10.1
420 %Soil Loss Ratio* = 14.26Soil Loss Ratio* = 15.22Soil Loss Ratio* = 16.23
Shear: 1.35 psf for 30 min. Soil Loss = 40.0 gShear: 1.89 psf for 30 min. Soil Loss = 303.3 gShear: 2.41 psf for 30 min. Soil Loss = 345.0 g
2.39 psf @ ½-in soil loss
= 479%(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
Test ResultParameters
Test Results
Extended-term biodegradable double netstraw/coconut erosion control blanket.
Organic jute fiber top and bottom nets each with0.5 x 1.0 inch rectangular openings
100% organic @ 1.5 in. transverse stitchspacing
90
North American Green North American Green
5401 St. Wendel - Cynthia Rd. 5401 St. Wendel - Cynthia Rd.Poseyville, IN 47633 Poseyville, IN 47633
Jill Pack Deanna DixPhone: 800-722-2040 Phone: 800-722-2040Fax: 812-867-0247 Fax: 812-867-0247E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-04-002
Product Identification: DS150
Description:
Netting:
Matrix/Fill: 100% straw
Stitching:
7.18 oz/sq.yd.12.3 lb/in @ % 25.88.0 lb/in @ % 33.2
270 mils82.7 % / % 17.3
428 %Soil Loss Ratio* = 8.37Soil Loss Ratio* = 7.77Soil Loss Ratio* = 7.21
Shear: 1.28 psf for 30 min. Soil Loss = 291.7 gShear: 1.86 psf for 30 min. Soil Loss = 403.3 gShear: 2.46 psf for 30 min. Soil Loss = 548.3 g
2.09 psf @ ½-in soil loss
= 396%(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
Test ResultParameters
Test Results
Ultra short term double net straw temporaryerosion control blanket.
Rapid photodegradable polypropelene top andbottom nets each with 0.5 inch square openings
100% synthetic @ 1.5 in. transverse stitchspacing
91
North American Green North American Green
5401 St. Wendel - Cynthia Rd. 5401 St. Wendel - Cynthia Rd.Poseyville, IN 47633 Poseyville, IN 47633
Jill Pack Deanna DixPhone: 800-722-2040 Phone: 800-722-2040Fax: 812-867-0247 Fax: 812-867-0247E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-04-003
Product Identification: C125
Description:
Netting:
Matrix/Fill: 100% coconut
Stitching:
8.01 oz/sq.yd.31.3 lb/in @ % 24.613.1 lb/in @ % 27.3
231 mils81.6 % / % 18.4
259 %Soil Loss Ratio* = 10.53Soil Loss Ratio* = 12.23Soil Loss Ratio* = 14.19
Shear: 2.06 psf for 30 min. Soil Loss = 328.3 gShear: 2.73 psf for 30 min. Soil Loss = 401.7 gShear: 3.40 psf for 30 min. Soil Loss = 510.0 g
3.04 psf @ ½-in soil loss
= 576%
Test ResultParameters
Test Results
Long-term photodegradable double net coconuterosion control blanket.
High strength photodegradable polypropelene topand bottom nets each with 0.625 inch squareopenings
100% synthetic @ 1.5 in. transverse stitchspacing
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
92
North American Green North American Green
5401 St. Wendel - Cynthia Rd. 5401 St. Wendel - Cynthia Rd.Poseyville, IN 47633 Poseyville, IN 47633
Jill Pack Deanna DixPhone: 800-722-2040 Phone: 800-722-2040Fax: 812-867-0247 Fax: 812-867-0247E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-026
Product Identification: S75BN
Description:
Netting:
Matrix/Fill: 100% straw
Stitching:
8.99 oz/sq.yd.9.2 lb/in @ % 12.95.0 lb/in @ % 13.3
388 mils94.5 % / % 5.5
330 %Soil Loss Ratio* = 9.87Soil Loss Ratio* = 9.69Soil Loss Ratio* = 9.51
Shear: 0.69 psf for 30 min. Soil Loss = 125.0 gShear: 1.82 psf for 30 min. Soil Loss = 453.3 gShear: 2.39 psf for 30 min. Soil Loss = 920.0 g
1.79 psf @ ½-in soil loss
= 352%
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
Biodegradable single net straw temporaryerosion control blanket.
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
100% Organic @ 1.5 in. transverse stitchspacing
Biodegradable jute top net with 1 inch x 0.5 inchrectangular openings
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
93
North American Green North American Green
5401 St. Wendel - Cynthia Rd. 5401 St. Wendel - Cynthia Rd.Poseyville, IN 47633 Poseyville, IN 47633
Jill Pack Deanna DixPhone: 800-722-2040 Phone: 800-722-2040Fax: 812-867-0247 Fax: 812-867-0247E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-027
Product Identification:
Description:
Netting:
Matrix/Fill: 100% straw
Stitching:
8.99 oz/sq.yd.10.9 lb/in @ % 15.810.6 lb/in @ % 13.8
287 mils88.9 % / % 11.1
376 %Soil Loss Ratio* = 12.12Soil Loss Ratio* = 12.43Soil Loss Ratio* = 12.75
Shear: 1.26 psf for 30 min. Soil Loss = 101.7 gShear: 1.82 psf for 30 min. Soil Loss = 396.7 gShear: 2.39 psf for 30 min. Soil Loss = 1063.3 g
1.95 psf @ ½-in soil loss
= 643%
S150BN
Biodegradable double net straw temporaryerosion control blanket.
100% Organic @ 1.5 in. transverse stitchspacing
Biodegradable jute top and bottom nets eachwith 1 inch x 0.5 inch rectangular openings
Test ResultParameters
Test Results
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
94
North American Green North American Green
5401 St. Wendel - Cynthia Rd. 5401 St. Wendel - Cynthia Rd.Poseyville, IN 47633 Poseyville, IN 47633
Jill Pack Deanna DixPhone: 800-722-2040 Phone: 800-722-2040Fax: 812-867-0247 Fax: 812-867-0247E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-028
Product Identification:
Description:
Netting:
Matrix/Fill: 100% coconut
Stitching:
8.76 oz/sq.yd.16.9 lb/in @ % 11.713.5 lb/in @ % 10.5
291 mils86.4 % / % 13.6
205 %Soil Loss Ratio* = 13.38Soil Loss Ratio* = 16.76Soil Loss Ratio* = 21.00
Shear: 1.87 psf for 30 min. Soil Loss = 118.3 gShear: 2.99 psf for 30 min. Soil Loss = 471.7 gShear: 4.06 psf for 30 min. Soil Loss = 1178.3 g
3.08 psf @ ½-in soil loss
= 545%
C125BN
Biodegradable double net coconut temporaryerosion control blanket.
100% Organic @ 1.5 in. transverse stitchspacing
Biodegradable jute top and bottom nets eachwith 1 inch x 0.5 inch rectangular openings
Test ResultParameters
Test Results
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
95
North American Green North American Green
5401 St. Wendel Cynthiana Rd. 5401 St. Wendel Cynthiana Rd.Poseyville, IN 47633 Poseyville, IN 47633
Jill Pack Deanna DixPhone: 800-772-2040 Phone: 800-772-2040Fax: 812-867-0247 Fax: 812-963-3799E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-01-001
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw fiber
Stitching:
9.41 oz/sq.yd.8.1 lb/in @ % 27.85.0 lb/in @ % 26.9
279 mils81.3 % / % 18.7
408 %Soil Loss Ratio* = 6.10Soil Loss Ratio* = 6.56Soil Loss Ratio* = 7.06
Shear: 1.28 psf for 30 min. Soil Loss = 183.3 gShear: 1.86 psf for 30 min. Soil Loss = 438.3 gShear: 2.48 psf for 30 min. Soil Loss = 2475.0 g
1.76 psf @ ½-in soil loss
= 226%
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
100% polypropylene @ 1.5 in. transverse stitchspacing
Photodegradable polypropylene top net with 0.5inch square openings
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
Single net straw temporary erosion controlblanket
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
S75
96
North American Green North American Green
5401 St. Wendel Cynthiana Rd. 5401 St. Wendel Cynthiana Rd.Poseyville, IN 47633 Poseyville, IN 47633
Jill Pack Deanna DixPhone: 800-772-2040 Phone: 800-772-2040Fax: 812-867-0247 Fax: 812-963-3799E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-01-002
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw fiber
Stitching:
8.68 oz/sq.yd.8.1 lb/in @ % 26.33.3 lb/in @ % 25.6
335 mils85.0 % / % 15.0
436 %Soil Loss Ratio* = 4.90Soil Loss Ratio* = 4.89Soil Loss Ratio* = 4.88
Shear: 1.28 psf for 30 min. Soil Loss = 200.0 gShear: 1.86 psf for 30 min. Soil Loss = 813.3 gShear: 2.48 psf for 30 min. Soil Loss = 2073.3 g
1.65 psf @ ½-in soil loss
= 300%
100% polypropylene @ 1.5 in. transverse stitchspacing
Accelerated photodegradable polypropylene topnet with 0.5 inch square openings
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
DS75
Single net straw temporary erosion controlblanket
Parameters
Test Results
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
97
North American Green North American Green
5401 St. Wendel Cynthiana Rd. 5401 St. Wendel Cynthiana Rd.Poseyville, IN 47633 Poseyville, IN 47633
Jill Pack Deanna DixPhone: 800-772-2040 Phone: 800-772-2040Fax: 812-867-0247 Fax: 812-963-3799E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-01-003
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw fiber
Stitching:
9.96 oz/sq.yd.9.2 lb/in @ % 26.36.6 lb/in @ % 28.6
275 mils85.4 % / % 14.6
382 %Soil Loss Ratio* = 6.73Soil Loss Ratio* = 6.35Soil Loss Ratio* = 5.99
Shear: 1.86 psf for 30 min. Soil Loss = 388.3 gShear: 2.48 psf for 30 min. Soil Loss = 675.0 gShear: 3.01 psf for 30 min. Soil Loss = 1990.0 g
2.04 psf @ ½-in soil loss
= 570%
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
100% polypropylene @ 1.5 in. transverse stitchspacing
Photodegradable polypropylene top and bottomnets (Each with 0.5 inch square openings)
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
S150
Double net straw temporary erosion controlblanket
98
North American Green North American Green
5401 St. Wendel Cynthiana Rd. 5401 St. Wendel Cynthiana Rd.Poseyville, IN 47633 Poseyville, IN 47633
Jill Pack Deanna DixPhone: 800-772-2040 Phone: 800-772-2040Fax: 812-867-0247 Fax: 812-963-3799E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-01-004
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Polypropylene
Stitching:
13.60 oz/sq.yd.22.8 lb/in @ % 30.020.3 lb/in @ % 27.5
333 mils79.3 % / % 20.7
0.913 g/cm3Soil Loss Ratio* = 3.79Soil Loss Ratio* = 4.70Soil Loss Ratio* = 5.83
Shear: 2.13 psf for 30 min. Soil Loss = 228.3 gShear: 2.81 psf for 30 min. Soil Loss = 531.7 gShear: 3.53 psf for 30 min. Soil Loss = 898.3 g
2.76 psf @ ½-in soil loss
= 288%
UV Stabilized polypropylene top (0.5 inch squareopenings) and bottom net (0.5 inch squareopenings)
Double-netted synthetic permanent turfreinforcement mat with polypropylene fill
Plant Name:
Plant Address:
Plant Contact:
City/State/Zip:
P300
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
ASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
100% UV Stabilized polypropylene @ 1.5 in.transverse stitch spacing
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECP Abilityto Protect Soil from Hydraulically-Induced Shear StressesUnder Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECP Abilityto Protect Soil From Rain Splash and Associated RunoffUnder Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index Test
Manufacturer:
Corporate Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Corporate Contact:
City/State/Zip:
Parameters
Index Test
Index Test
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
- TD
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
99
North American Green North American Green
5401 St. Wendel Cynthiana Rd. 5401 St. Wendel Cynthiana Rd.Poseyville, IN 47633 Poseyville, IN 47633
Jill Pack Deanna DixPhone: 800-772-2040 Phone: 800-772-2040Fax: 812-867-0247 Fax: 812-963-3799E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-01-005
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Coconut
Stitching:
13.98 oz/sq.yd.57.2 lb/in @ % 26.867.8 lb/in @ % 19.2
505 mils85.9 % / % 14.1
247 %Soil Loss Ratio* = 11.82Soil Loss Ratio* = 14.10Soil Loss Ratio* = 16.83
Shear: 4.17 psf for 30 min. Soil Loss = 228.3 gShear: 5.01 psf for 30 min. Soil Loss = 233.3 gShear: 5.87 psf for 30 min. Soil Loss = 553.3 g
5.74 psf @ ½-in soil loss
= 381%
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
UV Stabilized polypropylene top (0.5 inch squareopenings) and bottom net (0.5 inch squareopenings) with a corrugated middle net
100% UV Stabilized polypropylene @ 1.5 in.transverse stitch spacing
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
C350
Triple net permanent turf reinforcement mat withcoconut fill
100
Propex Fabrics, Inc. Propex Fabrics, Inc.
6025 Lee Highway, Suite 425 510 O, Neal LaneChattanooga, TX 37421 Baton Rouge, LA 70819
Brittany Garner Brittany GarnerPhone: 423-553-2532 Phone: 423-553-2532Fax: Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-02-001
Product Identification: Landlok 300
Description:
Netting:
Matrix/Fill: NA
Stitching:
8.20 oz/sq.yd.233.5 lb/in @ % 27.7214.7 lb/in @ % 22.4
226 mils74.7 % / % 25.3
0.909 g/cm3Soil Loss Ratio* = 6.59Soil Loss Ratio* = 5.54Soil Loss Ratio* = 4.65
Shear: 3.36 psf for 30 min. Soil Loss = 311.7 gShear: 4.21 psf for 30 min. Soil Loss = 523.3 gShear: 5.06 psf for 30 min. Soil Loss = 1318.3 g
3.87 psf @ ½-in soil loss
= 256%
150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =
Index Test
Top soil; Fescue (Kentucky 31);21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Corporate Contact:
Index Test
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECP Abilityto Protect Soil from Hydraulically-Induced Shear StressesUnder Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECP Abilityto Protect Soil From Rain Splash and Associated RunoffUnder Bench-Scale Conditions
Hindered Amine Light Stabalizers (Hals) wovenmonofilament
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
NA
Index Test
Corporate Address:
Plant Contact:
Plant Name:
Plant Address:City/State/Zip:
3 dimensional, lofty, woven polpropylene turfreinforcement mat
City/State/Zip:
Parameters
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Manufacturer:
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
101
Propex Fabrics, Inc. Propex Fabrics, Inc.
6025 Lee Highway, Suite 425 510 O, Neal LaneChattanooga, TX 37421 Baton Rouge, LA 70819
Brittany Garner Brittany GarnerPhone: 423-553-2532 Phone: 423-553-2532Fax: Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-02-002
Product Identification: Pyramat
Description:
Netting:
Matrix/Fill: NA
Stitching:
12.64 oz/sq.yd.363.2 lb/in @ % 40.5259.9 lb/in @ % 32.8
389 mils91.3 % / % 8.7
0.909 g/cm3Soil Loss Ratio* = 6.83Soil Loss Ratio* = 6.13Soil Loss Ratio* = 5.51
Shear: 3.53 psf for 30 min. Soil Loss = 188.3 gShear: 4.38 psf for 30 min. Soil Loss = 300.0 gShear: 5.23 psf for 30 min. Soil Loss = 855.0 g
4.62 psf @ ½-in soil loss
= 273%
150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =
Index Test
Top soil; Fescue (Kentucky 31);21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Corporate Contact:
Index Test
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECP Abilityto Protect Soil from Hydraulically-Induced Shear StressesUnder Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECP Abilityto Protect Soil From Rain Splash and Associated RunoffUnder Bench-Scale Conditions
Hindered Amine Light Stabalizers (Hals) wovenmonofilament
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
NA
Index Test
Corporate Address:
Plant Contact:
Plant Name:
Plant Address:City/State/Zip:
3 dimensional, lofty, woven polpropylene turfreinforcement mat
City/State/Zip:
Parameters
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Manufacturer:
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
102
Propex Fabrics, Inc. Propex Fabrics, Inc.
6025 Lee Highway, Suite 425 510 O, Neal LaneChattanooga, TX 37421 Baton Rouge, LA 70819
Brittany Garner Brittany GarnerPhone: 423-553-2532 Phone: 423-553-2532Fax: Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-02-003
Product Identification: Landlok 450
Description:
Netting:
Matrix/Fill: 100% Polypropylene with X3 technology
Stitching:
9.99 oz/sq.yd.45.1 lb/in @ % 27.526.6 lb/in @ % 23.0
346 mils85.7 % / % 14.3
0.912 g/cm3Soil Loss Ratio* = 8.17Soil Loss Ratio* = 7.04Soil Loss Ratio* = 6.07
Shear: 2.40 psf for 30 min. Soil Loss = 378.3 gShear: 3.06 psf for 30 min. Soil Loss = 458.3 gShear: 3.73 psf for 30 min. Soil Loss = 626.7 g
2.91 psf @ ½-in soil loss
= 506%
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Manufacturer:
Index Test
Corporate Address:
Plant Contact:
Plant Name:
Plant Address:City/State/Zip:
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECP Abilityto Protect Soil from Hydraulically-Induced Shear StressesUnder Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECP Abilityto Protect Soil From Rain Splash and Associated RunoffUnder Bench-Scale Conditions
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
Index Test
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =
City/State/Zip:
Top soil; Fescue (Kentucky 31);21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Corporate Contact:
Index TestIndex Test
Parameters
UV stabilized (2% carbon black) polymer thread@ 3.0 in. transverse stitch spacing
1% Hindered Amine Light Stabalizers (Hals) netson top and bottom nets each with 0.5 inchsquare openings
Double-netted synthetic permanent turfreinforcement mat with polymer fiber fill
150 mm (6 in.) / hr for 30 min.
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
103
Rhino Seed & Landscape Supply Rhino Seed & Turf Supply
850 N. Old US 23 1113 Electric AvenueBrighton, MI 48114 Wayland, MI 49348
Tricia Chismar Gary CookPhone: 269-792-2242 Phone: 269-792-2242Fax: 269-792-0700 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-020
Product Identification: Rhino Erosion King Straw Blanket
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
7.36 oz/sq.yd.7.7 lb/in @ % 46.84.6 lb/in @ % 34.0
344 mils85.9 % / % 14.1
489 %Soil Loss Ratio* = 4.69Soil Loss Ratio* = 5.51Soil Loss Ratio* = 6.48
Shear: 0.75 psf for 30 min. Soil Loss = 25.0 gShear: 1.35 psf for 30 min. Soil Loss = 565.0 gShear: 1.95 psf for 30 min. Soil Loss = 1850.0 g
1.47 psf @ ½-in soil loss
= 433%
Synthetic top net with 0.5 inch square openings
Single net temporary straw erosion controlblanket
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
Parameters
Test Results
100% Synthetic @ 1.5 in. transverse stitchspacing
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
104
Rhino Seed & Landscape Supply Rhino Seed & Turf Supply
850 N. Old US 23 1113 Electric AvenueBrighton, MI 48114 Wayland, MI 49348
Tricia Chismar Gary CookPhone: 269-792-2242 Phone: 269-792-2242Fax: 269-792-0700 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-020
Product Identification: Rhino Erosion King II Straw Blanket
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
7.93 oz/sq.yd.12.9 lb/in @ % 30.28.5 lb/in @ % 41.6
339 mils84.6 % / % 15.4
442 %Soil Loss Ratio* = 6.90Soil Loss Ratio* = 5.97Soil Loss Ratio* = 5.17
Shear: 0.75 psf for 30 min. Soil Loss = 15.0 gShear: 1.35 psf for 30 min. Soil Loss = 285.0 gShear: 1.95 psf for 30 min. Soil Loss = 793.3 g
1.68 psf @ ½-in soil loss
= 602%
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
100% Synthetic @ 1.5 in. transverse stitchspacing
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
Synthetic top and bottom nets each with 0.5 inchsquare openings
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
Double-netted temporary straw erosion controlblanket
105
US Erosion Control Products US Erosion Control Products
1800 Springhead Church Rd. 1034 Albany Avenue WestWillacoochee, GA 31650 Pearson, GA 31642
Jody Cabe Andrew WelshPhone: 800-948-7870 Phone: 478-960-6975Fax: 912-594-6071 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-032
Product Identification: US-1X
Description:
Netting:
Matrix/Fill: 100% wood fiber
Stitching:
8.33 oz/sq.yd.10.3 lb/in @ % 28.14.9 lb/in @ % 23.0
334 mils72.8 % / % 27.2
152 %Soil Loss Ratio* = 7.71Soil Loss Ratio* = 6.43Soil Loss Ratio* = 5.37
Shear: 0.88 psf for 30 min. Soil Loss = 191.7 gShear: 1.68 psf for 30 min. Soil Loss = 565.0 gShear: 3.27 psf for 30 min. Soil Loss = 1280.0 g
1.76 psf @ ½-in soil loss
= 406%
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index Test
Synthetic top net with 3/8 inch square openings
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
ASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Test ResultParameters
Test Results
Single net excelsior temporary erosion controlblanket
100% Synthetic @ 1.5 in. transverse stitchspacing
106
US Erosion Control Products US Erosion Control Products
1800 Springhead Church Rd. 1034 Albany Avenue WestWillacoochee, GA 31650 Pearson, GA 31642
Jody Cabe Andrew WelshPhone: 800-948-7870 Phone: 478-960-6975Fax: 912-594-6071 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-01-033
Product Identification: US-2X
Description:
Netting:
Matrix/Fill: 100% wood fiber
Stitching:
7.95 oz/sq.yd.13.8 lb/in @ % 23.39.3 lb/in @ % 30.9
348 mils81.4 % / % 18.6
164 %Soil Loss Ratio* = 6.67Soil Loss Ratio* = 5.82Soil Loss Ratio* = 5.08
Shear: 1.68 psf for 30 min. Soil Loss = 113.3 gShear: 2.47 psf for 30 min. Soil Loss = 546.7 gShear: 3.27 psf for 30 min. Soil Loss = 2073.3 g
2.41 psf @ ½-in soil loss
= 495%
Test Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Test ResultParameters
Test Results
Double net excelsior temporary erosion controlblanket
100% Synthetic @ 1.5 in. transverse stitchspacing
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Plant Name:
Plant Address:City/State/Zip:
Plant Contact:
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index Test
Synthetic top and bottom nets each with 3/8 inchsquare openings
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
ASTM D 6475 - Mass per Unit Area
107
US Erosion Control Products US Erosion Control Products
PO Box 370 5227 Springhead Church Road
Willacoochee, GA 31650 Willacoochee, GA 31650
Curtis (Randy) Massingill Andrew WelshPhone: 864-990-6606 Phone: 478-960-6975Fax: 912-422-6351 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-04-007
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Coconut
Stitching:
10.02 oz/sq.yd.27.6 lb/in @ % 25.814.3 lb/in @ % 34.0
332 mils88.6 % / % 11.4
493 %Soil Loss Ratio* = 17.17Soil Loss Ratio* = 18.13Soil Loss Ratio* = 19.15
Shear: 1.99 psf for 30 min. Soil Loss = 218.3 gShear: 2.61 psf for 30 min. Soil Loss = 306.7 gShear: 3.31 psf for 30 min. Soil Loss = 773.3 g
2.83 psf @ ½-in soil loss
= 700%
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:
City/State/Zip:
Plant Address:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
UV stabilized synthetic stitching @ 2.0 in.transverse stitch spacing
UV stabilized synthetic top and bottom nets eachwith 0.75 inch square openings
City/State/Zip:
Plant Contact:
Plant Name:
US-2C
Double net temporary coconut erosion controlblanket
108
US Erosion Control Products US Erosion Control Products
PO Box 370 5227 Springhead Church Road
Willacoochee, GA 31650 Willacoochee, GA 31650
Curtis (Randy) Massingill Andrew WelshPhone: 864-990-6606 Phone: 478-960-6975Fax: 912-422-6351 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-04-008
Product Identification:
Description:
Netting:
Matrix/Fill: 70% Wheat Straw / 30% Coconut
Stitching:
12.47 oz/sq.yd.17.1 lb/in @ % 26.69.0 lb/in @ % 27.4
365 mils94.8 % / % 5.2
446 %Soil Loss Ratio* = 18.35Soil Loss Ratio* = 20.42Soil Loss Ratio* = 22.71
Shear: 1.94 psf for 30 min. Soil Loss = 153.3 gShear: 2.56 psf for 30 min. Soil Loss = 305.0 gShear: 3.18 psf for 30 min. Soil Loss = 1308.3 g
2.64 psf @ ½-in soil loss
= 458%
UV stabilized synthetic stitching @ 2.0 in.transverse stitch spacing
UV stabilized synthetic top with 0.75 inch squareopenings and photodegradable bottom net with0.5 x 0.54 inch rectangular openings
City/State/Zip:
Plant Contact:
Plant Name:
US-2S/C
Double net temporary straw/coconut erosioncontrol blanket
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:
City/State/Zip:
Plant Address:
109
US Erosion Control Products US Erosion Control Products
PO Box 370 5227 Springhead Church Road
Willacoochee, GA 31650 Willacoochee, GA 31650
Curtis (Randy) Massingill Andrew WelshPhone: 864-990-6606 Phone: 478-960-6975Fax: 912-422-6351 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-04-009
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Polymer
Stitching:
10.65 oz/sq.yd.42.3 lb/in @ % 16.133.7 lb/in @ % 21.3
377 mils82.6 % / % 17.4
0.915 g/cm3Soil Loss Ratio* = 4.91Soil Loss Ratio* = 4.66Soil Loss Ratio* = 4.42
Shear: 2.21 psf for 30 min. Soil Loss = 288.3 gShear: 2.89 psf for 30 min. Soil Loss = 378.3 gShear: 3.45 psf for 30 min. Soil Loss = 850.0 g
2.85 psf @ ½-in soil loss
= 596%
Synthetic UV stabilized top and bottom nets(each with 0.75 square openings)
Double-netted synthetic permanent turfreinforcement mat with polymer fiber fill
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
City/State/Zip:
Plant Name:
Plant Address:
Plant Contact:
US-2P12
ASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
UV stabilized synthetic @ 1.5 in. transversestitch spacing
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECP Abilityto Protect Soil from Hydraulically-Induced Shear StressesUnder Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECP Abilityto Protect Soil From Rain Splash and Associated RunoffUnder Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index Test
Manufacturer:
Corporate Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Corporate Contact:
City/State/Zip:
Parameters
Index Test
Index Test
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
- TD
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
110
US Erosion Control Products US Erosion Control Products
PO Box 370 5227 Springhead Church Road
Willacoochee, GA 31650 Willacoochee, GA 31650
Curtis (Randy) Massingill Andrew WelshPhone: 864-990-6606 Phone: 478-960-6975Fax: 912-422-6351 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-04-010
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Wheat Straw
Stitching:
10.47 oz/sq.yd.6.5 lb/in @ % 29.62.7 lb/in @ % 25.6
436 mils90.1 % / % 9.9
431 %Soil Loss Ratio* = 8.30Soil Loss Ratio* = 10.59Soil Loss Ratio* = 13.50
Shear: 1.26 psf for 30 min. Soil Loss = 223.3 gShear: 1.82 psf for 30 min. Soil Loss = 568.3 gShear: 2.39 psf for 30 min. Soil Loss = 951.7 g
1.75 psf @ ½-in soil loss
= 391%
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:
City/State/Zip:
Plant Address:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Photodegradable synthetic stitching @ 1.5 in.transverse stitch spacing
Photodegradable synthetic top net with 0.5 inchsquare openings
City/State/Zip:
Plant Contact:
Plant Name:
US-1S
Single net temporary straw erosion controlblanket
111
US Erosion Control Products US Erosion Control Products
PO Box 370 5227 Springhead Church Road
Willacoochee, GA 31650 Willacoochee, GA 31650
Curtis (Randy) Massingill Andrew WelshPhone: 864-990-6606 Phone: 478-960-6975Fax: 912-422-6351 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-04-011
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Wheat Straw
Stitching:
10.59 oz/sq.yd.11.4 lb/in @ % 29.56.4 lb/in @ % 31.1
463 mils92.9 % / % 7.1
397 %Soil Loss Ratio* = 11.71Soil Loss Ratio* = 10.91Soil Loss Ratio* = 10.16
Shear: 1.26 psf for 30 min. Soil Loss = 185.0 gShear: 1.82 psf for 30 min. Soil Loss = 286.7 gShear: 2.39 psf for 30 min. Soil Loss = 751.7 g
2.05 psf @ ½-in soil loss
= 402%
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:
City/State/Zip:
Plant Address:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
City/State/Zip:
Plant Contact:
Plant Name:
US-2S
Photodegradable synthetic stitching @ 2.0 in.transverse stitch spacing
Photodegradable synthetic top and bottom netseach with 0.5 x 0.54 inch rectangular openings
Double net temporary straw erosion controlblanket
112
Western Excelsior Western Excelsior
901 Grand Ave 901 Grand AveMancos, CO 81328 Mancos, CO 81328
Chad Lipscomb Chad LipscombPhone: 970-631-8366 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-01-025
Product Identification: Excel R-1 All Natural
Description:
Netting:
Matrix/Fill: 100% Rocky Mountain Aspen
Stitching:
7.96 oz/sq.yd.10.8 lb/in @ % 12.87.3 lb/in @ % 15.7
237 mils65.2 % / % 34.8
281 %Soil Loss Ratio* = 5.94Soil Loss Ratio* = 6.51Soil Loss Ratio* = 7.15
Shear: 0.95 psf for 30 min. Soil Loss = 16.7 gShear: 1.76 psf for 30 min. Soil Loss = 141.7 gShear: 2.57 psf for 30 min. Soil Loss = 1523.3 g
2.15 psf @ ½-in soil loss
= 498%
Test ResultParameters
Test Results
Organic top net with 0.5 inch square openings
Biodegradable organic fiber single net excelsiortemporary erosion control blanket
100% Cotton @ 2.0 in. transverse stitch spacing
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
113
Western Excelsior Western Excelsior
901 Grand Ave 901 Grand AveMancos, CO 81328 Mancos, CO 81328
Chad Lipscomb Chad LipscombPhone: 970-631-8366 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-01-026
Product Identification: Excel SR-1 All Natural
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
8.02 oz/sq.yd.8.1 lb/in @ % 16.95.6 lb/in @ % 11.1
281 mils80.1 % / % 19.9
317 %Soil Loss Ratio* = 8.38Soil Loss Ratio* = 8.99Soil Loss Ratio* = 9.64
Shear: 0.81 psf for 30 min. Soil Loss = 90.0 gShear: 1.50 psf for 30 min. Soil Loss = 470.0 gShear: 1.99 psf for 30 min. Soil Loss = 805.0 g
1.61 psf @ ½-in soil loss
= 279%
Biodegradable organic fiber single net strawtemporary erosion control blanket
Test ResultParameters
Test Results
Organic top net with 0.5 inch square openings
100% Cotton @ 2.0 in. transverse stitch spacing
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
114
Western Excelsior Western Excelsior
901 Grand Ave 901 Grand AveMancos, CO 81328 Mancos, CO 81328
Chad Lipscomb Chad LipscombPhone: 970-631-8366 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-01-027
Product Identification: Excel S-2 All Natural
Description:
Netting:
Matrix/Fill: 100% excelsior
Stitching:
12.38 oz/sq.yd.17.5 lb/in @ % 15.66.5 lb/in @ % 26.9
296 mils82.2 % / % 17.8
263 %Soil Loss Ratio* = 9.31Soil Loss Ratio* = 11.11Soil Loss Ratio* = 13.26
Shear: 1.68 psf for 30 min. Soil Loss = 65.0 gShear: 3.27 psf for 30 min. Soil Loss = 636.7 gShear: 3.90 psf for 30 min. Soil Loss = 963.3 g
3.17 psf @ ½-in soil loss
= 481%
Biodegradable organic fiber double net excelsiortemporary erosion control blanket
Test ResultParameters
Test Results
Organic top and bottom nets each with 0.5 inchsquare openings
100% Cotton @ 2.0 in. transverse stitch spacing
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
115
Western Excelsior Western Excelsior
901 Grand Ave 901 Grand AveMancos, CO 81328 Mancos, CO 81328
Chad Lipscomb Chad LipscombPhone: 970-631-8366 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2011-01-028
Product Identification: Excel S-2
Description:
Netting:
Matrix/Fill: 100% excelsior
Stitching:
9.49 oz/sq.yd.9.3 lb/in @ % 26.65.9 lb/in @ % 34.1
367 mils78.7 % / % 21.3
314 %Soil Loss Ratio* = 9.12Soil Loss Ratio* = 10.24Soil Loss Ratio* = 11.51
Shear: 1.68 psf for 30 min. Soil Loss = 70.0 gShear: 2.47 psf for 30 min. Soil Loss = 410.0 gShear: 3.27 psf for 30 min. Soil Loss = 610.0 g
2.88 psf @ ½-in soil loss
= 298%(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Plant Name:Manufacturer:
Corporate Contact:
Corporate Address: Plant Address:City/State/Zip:City/State/Zip:
Plant Contact:
Double net excelsior temporary erosion controlblanket
Test ResultParameters
Test Results
Synthetic top and bottom nets each with 1.0 x0.75 inch openings
100% Synthetic @ 2.0 in. transverse stitchspacing
116
Western Excelsior Western Excelsior
901 Grand Ave P.O. Box 270308Mancos, CO 81328 Fort Collins, CO 80527
Chad Lipscomb Chad LipscombPhone: 970-631-8366 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-001
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Synthetic
Stitching:
12.59 oz/sq.yd.31.1 lb/in @ % 27.121.9 lb/in @ % 25.0
339 mils73.2 % / % 26.8
0.910 g/cm3Soil Loss Ratio* = 5.31Soil Loss Ratio* = 6.27Soil Loss Ratio* = 7.41
Shear: 1.51 psf for 30 min. Soil Loss = 218.3 gShear: 2.17 psf for 30 min. Soil Loss = 236.7 gShear: 2.86 psf for 30 min. Soil Loss = 633.3 g
2.61 psf @ ½-in soil loss
= 569%
Plant Name:
Plant Address:
Plant Contact:
City/State/Zip:
Excel PP5-12
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Test Method - Description
100% UV inhibited synthetic @ 2.0 in.transverse stitch spacing
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ECTC Method 3 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ECTC Draft Method 4 - Determination of TemporaryDegradable RECP Performance in Encouraging SeedGermination and Plant Growth
ECTC Method 2 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index Test
Manufacturer:
Corporate Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Corporate Contact:
City/State/Zip:
Parameters
Index Test
Index Test
Synthetic top and bottom nets (each with 0.75inch square openings)
Double-netted synthetic permanent turfreinforcement mat
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
117
Western Excelsior Western Excelsior
4609 E Boonville 901 Grand AveNew Harmony RdEvansville, IN 47725 Mancos, CO 81328
Chad Lipscomb Chad LipscombPhone: 970-682-4594 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-002
Product Identification:
Description:
Netting:
Matrix/Fill: 100% excelsior
Stitching:
17.19 oz/sq.yd.21.6 lb/in @ % 29.212.8 lb/in @ % 32.3
382 mils86.6 % / % 13.4
225 %Soil Loss Ratio* = 16.39Soil Loss Ratio* = 18.26Soil Loss Ratio* = 20.34
Shear: 2.37 psf for 30 min. Soil Loss = 163.3 gShear: 3.17 psf for 30 min. Soil Loss = 358.3 gShear: 3.96 psf for 30 min. Soil Loss = 746.7 g
3.42 psf @ ½-in soil loss
= 320%
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:
City/State/Zip:
Plant Address:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
100% Synthetic @ 2.0 in. transverse stitchspacing
Synthetic top & bottom nets each with 0.75 inchsquare openings
City/State/Zip:
Plant Contact:
Plant Name:
Excel SD-3
Photodegradable double net excelsior temporaryerosion control blanket
118
Western Excelsior Western Excelsior
901 Grand Ave P.O. Box 270308Mancos, CO 81328 Fort Collins, CO 80527
Chad Lipscomb Chad LipscombPhone: 970-631-8366 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-003
Product Identification:
Description:
Netting:
Matrix/Fill: 100% excelsior
Stitching:
11.69 oz/sq.yd.5.3 lb/in @ % 23.43.4 lb/in @ % 30.8
491 mils69.2 % / % 30.8
221 %Soil Loss Ratio* = 5.81Soil Loss Ratio* = 6.91Soil Loss Ratio* = 8.22
Shear: 0.92 psf for 30 min. Soil Loss = 63.3 gShear: 1.73 psf for 30 min. Soil Loss = 463.3 gShear: 2.52 psf for 30 min. Soil Loss = 841.7 g
2.00 psf @ ½-in soil loss
= 443%
Photodegradable single top net excelsiortemporary erosion control blanket
Synthetic top net with 1.0 inch square openings
100% Synthetic @ 2.0 in. transverse stitchspacing
Parameters
Test Results
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Plant Address:City/State/Zip:
Plant Contact:
Excel R-1
Plant Name:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
119
Western Excelsior Western Excelsior
901 Grand Ave P.O. Box 270308Mancos, CO 81328 Fort Collins, CO 80527
Chad Lipscomb Chad LipscombPhone: 970-631-8366 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-004
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Synthetic
Stitching:
9.84 oz/sq.yd.32.3 lb/in @ % 20.518.9 lb/in @ % 30.4
326 mils70.8 % / % 29.2
0.914 g/cm3Soil Loss Ratio* = 3.86Soil Loss Ratio* = 4.52Soil Loss Ratio* = 5.29
Shear: 1.51 psf for 30 min. Soil Loss = 130.0 gShear: 2.17 psf for 30 min. Soil Loss = 365.0 gShear: 2.86 psf for 30 min. Soil Loss = 668.3 g
2.47 psf @ ½-in soil loss
= 351%
Plant Name:
Plant Address:
Plant Contact:
City/State/Zip:
Excel PP5-10
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Test Method - Description
100% UV inhibited synthetic @ 2.0 in.transverse stitch spacing
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ECTC Method 3 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ECTC Draft Method 4 - Determination of TemporaryDegradable RECP Performance in Encouraging SeedGermination and Plant Growth
ECTC Method 2 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index Test
Manufacturer:
Corporate Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Corporate Contact:
City/State/Zip:
Parameters
Index Test
Index Test
Synthetic top and bottom nets (each with 0.75inch square openings)
Double-netted synthetic permanent turfreinforcement mat
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
120
Western Excelsior Western Excelsior
901 Grand Ave P.O. Box 270308Mancos, CO 81328 Fort Collins, CO 80527
Chad Lipscomb Chad LipscombPhone: 970-631-8366 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-005
Product Identification:
Description:
Netting:
Matrix/Fill: 100% straw
Stitching:
7.99 oz/sq.yd.6.1 lb/in @ % 19.34.6 lb/in @ % 19.2
288 mils88.8 % / % 11.2
435 %Soil Loss Ratio* = 6.44Soil Loss Ratio* = 8.47Soil Loss Ratio* = 11.15
Shear: 1.31 psf for 30 min. Soil Loss = 255.0 gShear: 1.86 psf for 30 min. Soil Loss = 488.3 gShear: 2.43 psf for 30 min. Soil Loss = 1576.7 g
1.71 psf @ ½-in soil loss
= 284%
100% Synthetic @ 2.0 in. transverse stitchspacing
Photodegradable single top net straw temporaryerosion control blanket
Synthetic top net with 0.5 inch square openings
Parameters
Test Results
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Plant Address:City/State/Zip:
Plant Contact:
Excel SR-1
Plant Name:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
121
Western Excelsior Western Excelsior
901 Grand Ave P.O. Box 270308Mancos, CO 81328 Fort Collins, CO 80527
Chad Lipscomb Chad LipscombPhone: 970-631-8366 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-006
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Synthetic
Stitching:
8.18 oz/sq.yd.31.0 lb/in @ % 20.116.4 lb/in @ % 30.1
352 mils72.9 % / % 27.1
0.915 g/cm3Soil Loss Ratio* = 3.89Soil Loss Ratio* = 3.84Soil Loss Ratio* = 3.79
Shear: 1.51 psf for 30 min. Soil Loss = 213.3 gShear: 2.17 psf for 30 min. Soil Loss = 491.7 gShear: 2.86 psf for 30 min. Soil Loss = 1075.0 g
2.12 psf @ ½-in soil loss
= 473%
Plant Name:
Plant Address:
Plant Contact:
City/State/Zip:
Excel PP5-8
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Test Method - Description
100% UV inhibited synthetic @ 2.0 in.transverse stitch spacing
- TDASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ECTC Method 3 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ECTC Draft Method 4 - Determination of TemporaryDegradable RECP Performance in Encouraging SeedGermination and Plant Growth
ECTC Method 2 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index Test
Manufacturer:
Corporate Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Corporate Contact:
City/State/Zip:
Parameters
Index Test
Index Test
Synthetic top and bottom nets (each with 0.75inch square openings)
Double-netted synthetic permanent turfreinforcement mat
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
122
Western Excelsior Western Excelsior
901 Grand Ave P.O. Box 270308Mancos, CO 81328 Fort Collins, CO 80527
Chad Lipscomb Chad LipscombPhone: 970-631-8366 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-007
Product Identification:
Description:
Netting:
Matrix/Fill: 100% coconut
Stitching:
9.26 oz/sq.yd.16.0 lb/in @ % 12.511.9 lb/in @ % 18.4
269 mils90.2 % / % 9.8
389 %Soil Loss Ratio* = 11.56Soil Loss Ratio* = 16.57Soil Loss Ratio* = 23.75
Shear: 2.06 psf for 30 min. Soil Loss = 173.3 gShear: 2.76 psf for 30 min. Soil Loss = 298.3 gShear: 3.43 psf for 30 min. Soil Loss = 576.7 g
3.18 psf @ ½-in soil loss
= 625%
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Plant Name:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Plant Address:City/State/Zip:
Plant Contact:
Excel CC-4 All Natural
Biodegradable organic fiber double net coconuttemporary erosion control blanket
Organic top and bottom nets each with 0.5 inchsquare openings
100% cotton @ 2.0 in. transverse stitch spacing
Parameters
Test Results
123
Western Excelsior Western Excelsior
901 Grand Ave P.O. Box 270308Mancos, CO 81328 Fort Collins, CO 80527
Chad Lipscomb Chad LipscombPhone: 970-631-8366 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-008
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
9.12 oz/sq.yd.12.7 lb/in @ % 11.08.2 lb/in @ % 14.5
288 mils88.9 % / % 11.1
393 %Soil Loss Ratio* = 9.58Soil Loss Ratio* = 11.92Soil Loss Ratio* = 14.84
Shear: 1.85 psf for 30 min. Soil Loss = 153.3 gShear: 2.43 psf for 30 min. Soil Loss = 545.0 gShear: 2.97 psf for 30 min. Soil Loss = 1126.7 g
2.41 psf @ ½-in soil loss
= 470%
100% cotton @ 2.0 in. transverse stitch spacing
Biodegradable organic fiber double net strawtemporary erosion control blanket
Organic top and bottom nets each with 0.5 inchsquare openings
Parameters
Test Results
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Plant Address:City/State/Zip:
Plant Contact:
Excel SS-2 All Natural
Plant Name:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
124
Western Excelsior Western Excelsior
901 Grand Ave P.O. Box 270308Mancos, CO 81328 Fort Collins, CO 80527
Chad Lipscomb Chad LipscombPhone: 970-631-8366 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2012-03-009
Product Identification:
Description:
Netting:
Matrix/Fill: 70% Straw, 30% Cococut
Stitching:
9.27 oz/sq.yd.17.4 lb/in @ % 13.213.2 lb/in @ % 15.6
370 mils90.3 % / % 9.7
351 %Soil Loss Ratio* = 11.75Soil Loss Ratio* = 16.73Soil Loss Ratio* = 23.82
Shear: 1.95 psf for 30 min. Soil Loss = 185.0 gShear: 2.61 psf for 30 min. Soil Loss = 366.7 gShear: 3.23 psf for 30 min. Soil Loss = 491.7 g
3.04 psf @ ½-in soil loss
= 395%
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Plant Name:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
Index TestASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Plant Address:City/State/Zip:
Plant Contact:
Excel CS-3 All Natural
100% cotton @ 2.0 in. transverse stitch spacing
Organic top and bottom nets each with 0.5 inchsquare openings
Biodegradable organic fiber double netstraw/coconut temporary erosion control blanket
Parameters
Test Results
125
Western Excelsior Western Excelsior
4609 E Boonville 3240 Avondale Mill Rd.New Harmony RdEvansville, IN 47725 Macon, GA 31216
Chad Lipscomb Chad LipscombPhone: 970-682-4594 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-02-001
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Coconut Fiber
Stitching:
8.96 oz/sq.yd.22.3 lb/in @ % 31.912.4 lb/in @ % 35.3
215 mils85.3 % / % 14.7
219 %Soil Loss Ratio* = 13.14Soil Loss Ratio* = 16.13Soil Loss Ratio* = 19.80
Shear: 2.06 psf for 30 min. Soil Loss = 85.0 gShear: 2.73 psf for 30 min. Soil Loss = 390.0 gShear: 3.40 psf for 30 min. Soil Loss = 690.0 g
3.03 psf @ ½-in soil loss
= 393%
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:
City/State/Zip:
Plant Address:
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
City/State/Zip:
Plant Contact:
Plant Name:
Excel CC-4
UV Stabilized synthetic @ 2 in. transverse stitchspacing
Synthetic top and bottom nets (each with 0.75inch square openings)
Double-netted temporary coconut erosion controlblanket
126
Western Excelsior Western Excelsior
4609 E Boonville 901 Grand AveNew Harmony RdEvansville, IN 47725 Mancos, CO 81328
Chad Lipscomb Chad LipscombPhone: 970-682-4594 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-02-002
Product Identification:
Description:
Netting:
Matrix/Fill: 70% Straw / 30% Coconut Fiber
Stitching:
8.46 oz/sq.yd.14.4 lb/in @ % 23.810.3 lb/in @ % 23.7
259 mils94.5 % / % 5.5
324 %Soil Loss Ratio* = 15.03Soil Loss Ratio* = 16.95Soil Loss Ratio* = 19.13
Shear: 1.94 psf for 30 min. Soil Loss = 336.7 gShear: 2.56 psf for 30 min. Soil Loss = 443.3 gShear: 3.18 psf for 30 min. Soil Loss = 898.3 g
2.40 psf @ ½-in soil loss
= 605%
City/State/Zip:
Plant Contact:
Plant Name:
Excel CS-3
UV Stabilized synthetic @ 2 in. transverse stitchspacing
Synthetic top and bottom nets (each with 0.75inch square openings)
Double-netted temporary straw/coconut erosioncontrol blanket
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:
City/State/Zip:
Plant Address:
127
Western Excelsior Western Excelsior
4609 E Boonville 901 Grand AveNew Harmony RdEvansville, IN 47725 Mancos, CO 81328
Chad Lipscomb Chad LipscombPhone: 970-682-4594 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-02-003
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
9.33 oz/sq.yd.14.3 lb/in @ % 20.510.7 lb/in @ % 15.0
303 mils88.4 % / % 11.6
345 %Soil Loss Ratio* = 7.72Soil Loss Ratio* = 10.97Soil Loss Ratio* = 15.59
Shear: 1.26 psf for 30 min. Soil Loss = 36.7 gShear: 1.82 psf for 30 min. Soil Loss = 325.0 gShear: 2.39 psf for 30 min. Soil Loss = 1080.0 g
2.04 psf @ ½-in soil loss
= 519%
City/State/Zip:
Plant Contact:
Plant Name:
Excel SS-2
UV Stabilized synthetic @ 2 in. transverse stitchspacing
Synthetic top and bottom nets (each with 0.5inch square openings)
Double-netted temporary straw erosion controlblanket
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:
City/State/Zip:
Plant Address:
128
Western Excelsior Western Excelsior
4609 E Boonville 901 Grand AveNew Harmony RdEvansville, IN 47725 Mancos, CO 81328
Chad Lipscomb Chad LipscombPhone: 970-682-4594 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-02-004
Product Identification: PP5-Xtreme
Description:
Netting:
Matrix/Fill: NA
Stitching:
9.95 oz/sq.yd.333.9 lb/in @ % 23.9260.4 lb/in @ % 21.9
251 mils72.8 % / % 27.2
0.893 g/cm3Soil Loss Ratio* = 4.05Soil Loss Ratio* = 4.71Soil Loss Ratio* = 5.46
Shear: 3.80 psf for 30 min. Soil Loss = 426.7 gShear: 4.72 psf for 30 min. Soil Loss = 533.3 gShear: 5.70 psf for 30 min. Soil Loss = 663.3 g
4.01 psf @ ½-in soil loss
= 552%
Index Test
Manufacturer:
Corporate Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Corporate Contact:
City/State/Zip:
Parameters
Index Test
Index Test
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
- TD
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECP Abilityto Protect Soil from Hydraulically-Induced Shear StressesUnder Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECP Abilityto Protect Soil From Rain Splash and Associated RunoffUnder Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
NA
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
City/State/Zip:
Plant Name:
Plant Address:
Plant Contact:
Woven monofiliment.
Woven Turf Reinforcement Mat
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
129
Western Excelsior Western Excelsior
4609 E Boonville 3240 Avondale Mill Rd.New Harmony RdEvansville, IN 47725 Macon, GA 31216
Chad Lipscomb Chad LipscombPhone: 970-682-4594 Phone: 970-631-8366Fax: 303-848-8649 Fax: 303-848-8649E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2013-04-004
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Synthetic
Stitching:
9.11 oz/sq.yd.24.5 lb/in @ % 26.814.6 lb/in @ % 46.3
350 mils76.2 % / % 23.8
0.909 g/cm3Soil Loss Ratio* = 8.63Soil Loss Ratio* = 6.42Soil Loss Ratio* = 4.78
Shear: 2.08 psf for 30 min. Soil Loss = 268.3 gShear: 2.76 psf for 30 min. Soil Loss = 406.7 gShear: 3.42 psf for 30 min. Soil Loss = 821.7 g
2.76 psf @ ½-in soil loss
= 321%
City/State/Zip:
Plant Name:
Plant Address:
Plant Contact:
Synthetic top and bottom nets (each with 0.75inch square openings)
Double-netted synthetic permanent turfreinforcement mat
Excel PP5-10
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
ASTM D 6818 – Ultimate Tensile Strength / Strain - MD
ASTM D 6525 – Thickness
Index Test
Index Test
100% UV inhibited synthetic @ 2.0 in.transverse stitch spacing
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECP Abilityto Protect Soil from Hydraulically-Induced Shear StressesUnder Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECP Abilityto Protect Soil From Rain Splash and Associated RunoffUnder Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
% Improvement
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
Index Test
Manufacturer:
Corporate Address:
ASTM D 792 – Specific Gravity - Net OnlyASTM D 6567 - Ground Cover / Light Penetration
Corporate Contact:
City/State/Zip:
Parameters
Index Test
Index Test
Test Results
Test ResultASTM D 6566 - Mass per Unit Area
Test Method - Description
- TD
9063 Bee Caves Road / Austin, TX 78733 / 512-263-2101 / FAX 263-2558 / 800-880-TEST
130
Winters Excelsior Winters Excelsior
P.O. Box 102 406 South Obee RoadAlton, AL 35015 Hutchinson, KS 67501
Frank Barnes Dennis MyrickPhone: 205-908-7170 Phone: 620-665-9757Fax: 866-589-7111 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2014-01-006
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
9.23 oz/sq.yd.15.0 lb/in @ % 13.212.1 lb/in @ % 15.5
315 mils90.1 % / % 9.9
371 %Soil Loss Ratio* = 16.98Soil Loss Ratio* = 16.02Soil Loss Ratio* = 15.12
Shear: 1.26 psf for 30 min. Soil Loss = 130.0 gShear: 1.82 psf for 30 min. Soil Loss = 266.7 gShear: 2.39 psf for 30 min. Soil Loss = 1115.0 g
1.97 psf @ ½-in soil loss
= 489%
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Double biodegradable net temporary strawerosion control blanket
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Biodegradable top and bottom nets each with 0.5inch square openings
100% organic @ 1.5 in. transverse stitchspacing
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Winters Straw HVBio
Plant Address:City/State/Zip:
Plant Contact:
Plant Name:
131
Winters Excelsior Winters Excelsior
P.O. Box 102 406 South Obee RoadAlton, AL 35015 Hutchinson, KS 67501
Frank Barnes Dennis MyrickPhone: 205-908-7170 Phone: 620-665-9757Fax: 866-589-7111 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2014-01-007
Product Identification:
Description:
Netting:
Matrix/Fill: 700% Straw / 30% Coconut
Stitching:
9.42 oz/sq.yd.13.8 lb/in @ % 14.311.6 lb/in @ % 17.2
291 mils90.0 % / % 10.0
376 %Soil Loss Ratio* = 11.50Soil Loss Ratio* = 15.36Soil Loss Ratio* = 20.53
Shear: 1.33 psf for 30 min. Soil Loss = 205.0 gShear: 1.94 psf for 30 min. Soil Loss = 220.0 gShear: 2.56 psf for 30 min. Soil Loss = 753.3 g
2.25 psf @ ½-in soil loss
= 505%
WintersChoice Bio
Plant Address:City/State/Zip:
Plant Contact:
Plant Name:
Biodegradable top and bottom nets each with 0.5inch square openings
100% organic @ 1.5 in. transverse stitchspacing
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Double biodegradable net temporarystraw/coconut erosion control blanket
132
Winters Excelsior Winters Excelsior
P.O. Box 102 406 South Obee RoadAlton, AL 35016 Hutchinson, KS 67501
Frank Barnes Dennis MyrickPhone: 205-908-7170 Phone: 620-665-9757Fax: 866-589-7111 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2014-01-008
Product Identification:
Description:
Netting:
Matrix/Fill: 700% Straw / 30% Coconut
Stitching:
8.98 oz/sq.yd.13.6 lb/in @ % 30.78.0 lb/in @ % 24.9
343 mils91.4 % / % 8.6
410 %Soil Loss Ratio* = 7.91Soil Loss Ratio* = 7.84Soil Loss Ratio* = 7.78
Shear: 1.33 psf for 30 min. Soil Loss = 343.3 gShear: 1.94 psf for 30 min. Soil Loss = 475.0 gShear: 2.56 psf for 30 min. Soil Loss = 755.0 g
1.79 psf @ ½-in soil loss
= 377%
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Double net temporary straw/coconut erosioncontrol blanket
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Synthetic top and bottom nets each with 0.5 inchsquare openings
100% synthetic @ 1.5 in. transverse stitchspacing
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
WintersChoice
Plant Address:City/State/Zip:
Plant Contact:
Plant Name:
133
Winters Excelsior Winters Excelsior
P.O. Box 102 406 South Obee RoadAlton, AL 35016 Hutchinson, KS 67501
Frank Barnes Dennis MyrickPhone: 205-908-7170 Phone: 620-665-9757Fax: 866-589-7111 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2014-01-009
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
10.08 oz/sq.yd.12.1 lb/in @ % 30.95.8 lb/in @ % 26.7
375 mils93.5 % / % 6.5
396 %Soil Loss Ratio* = 9.87Soil Loss Ratio* = 8.41Soil Loss Ratio* = 7.17
Shear: 1.26 psf for 30 min. Soil Loss = 280.0 gShear: 1.82 psf for 30 min. Soil Loss = 621.7 gShear: 2.39 psf for 30 min. Soil Loss = 1136.7 g
1.62 psf @ ½-in soil loss
= 440%
WinterStraw HVG
Plant Address:City/State/Zip:
Plant Contact:
Plant Name:
Synthetic top and bottom nets each with 0.5 inchsquare openings
100% synthetic @ 1.5 in. transverse stitchspacing
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Double net temporary straw erosion controlblanket
134
Winters Excelsior Winters Excelsior
P.O. Box 102 406 South Obee RoadAlton, AL 35016 Hutchinson, KS 67501
Frank Barnes Dennis MyrickPhone: 205-908-7170 Phone: 620-665-9757Fax: 866-589-7111 Fax:E-mail: [email protected] E-mail: [email protected]
NTPEP / Log Number: ECP-2014-01-010
Product Identification:
Description:
Netting:
Matrix/Fill: 100% Straw
Stitching:
9.38 oz/sq.yd.6.0 lb/in @ % 30.34.3 lb/in @ % 24.7
407 mils93.0 % / % 7.0
404 %Soil Loss Ratio* = 9.50Soil Loss Ratio* = 9.41Soil Loss Ratio* = 9.33
Shear: 0.91 psf for 30 min. Soil Loss = 231.7 gShear: 1.48 psf for 30 min. Soil Loss = 463.3 gShear: 2.05 psf for 30 min. Soil Loss = 1116.7 g
1.42 psf @ ½-in soil loss
= 487%
ASTM D 6475 - Mass per Unit AreaTest Method - Description Test Result
Index Test
AASHTO NTPEPRolled Erosion Control Product (RECP)
Test Report
Parameters
Test Results
Manufacturer:
Corporate Contact:
Corporate Address:City/State/Zip:
Single net temporary straw erosion controlblanket
Index Test
50 mm (2 in.) / hr for 30 min.
ASTM D 7207 - Determination of Unvegetated RECPAbility to Protect Soil from Hydraulically-Induced ShearStresses Under Bench-Scale Conditions
ASTM D 7322 - Determination of Temporary DegradableRECP Performance in Encouraging Seed Germination andPlant Growth
ASTM D 7101 - Determination of Unvegetated RECPAbility to Protect Soil From Rain Splash and AssociatedRunoff Under Bench-Scale Conditions 150 mm (6 in.) / hr for 30 min.
Synthetic top net with 0.5 inch square openings
100% synthetic @ 1.5 in. transverse stitchspacing
* Soil Loss Ratio = Soil Loss Bare Soil / Soil Loss with RECP = 1 / C-Factor (Note: soil loss is based on regression analysis)
% of Control
(increased biomass)
100 mm (4 in.) / hr for 30 min.
Soil loss curve intercept =Top soil; Fescue (Kentucky 31);
21 day incubation; 27±2° &approximately 45±5% RH
ASTM D 1117 & ECTC-TASC 00197 - Water AbsorptionASTM D 6567 - Ground Cover / Light Penetration
Index TestIndex Test
ASTM D 6818 – Ultimate Tensile Strength / Strain -- TD
ASTM D 6525 – Thickness
Index Test
WinterStraw SN
Plant Address:City/State/Zip:
Plant Contact:
Plant Name:
135