2015 Product Catalogue - Fire Safety Equipment & Supplies€¦ · Fire Extinguisher Use There are different types of fire extinguishers for different types of fire hazards. Class

Phone 1800 672 171 | www.kidde.com.au | [email protected] 1

2015 Product CatalogueExtinguishers Hose Reels Fire Blankets

Madalyn

Rectangle

Madalyn

Rectangle

2 Phone 1800 672 171 | www.kidde.com.au | [email protected]

Our range of fire extinguishers, quickfit hose reel and fire

blankets are designed to assist in the provision of a safe

working and living environment.

Certified to Australian Standards, Our hose reels (AS1221),

extinguishers (AS1841) give assurance of quality and

performance when you need it most.

Our range of quality dry chemical, wet chemical, water,

foam and carbon dioxide extinguishers are easy to use and

available in a variety of sizes.


Fire Extinguisher Use There are different types of fire extinguishers for different types

of fire hazards.

Class of Fire

AWood,

paper and plastics

BFlammable

and combustible

liquids

CFlammable

gases

EEnergised electrical

equipment

FCooking oils and

fats

Notes: LIMITED indicates that the extinguishant is NOT the agent of choice for the class of fire, but that it will have limited extinguishing capability.

Class D fires (involving combustible materials) use only special purpose extinguishers and seek expert advice.

Comments: Refer to Appendix A of AS 2444

Type

of F

ire E

xtin

guis

her

Water a x x x xDangerous if used on flammable liquid, live electrical equipment and cooking oil/fat fires.

Wet Chemical a x x x a Dangerous if used on electrical fires.

Foam a a x x Limited Dangerous if used on electrical fires.

Powder ABE a a a a xSpecial powders are available spe-cifically for various types of metal fires (seek expert advice).

Powder BE x a a a aSpecial powders are available specifically for various types of metal fires (seek expert advice).

Carbon Dioxide Limited Limited x a x Generally not suitable for outdoor use. Suitable only for small fires.

Vaporising Liquid a Limited Limited a x Check the characteristics of the

specific extinguishant.

Fire Hose Reel a x x x xEnsure you maintain a path of egress between you and the nearest exit.

Fire Blanket Limited x x x aUse as a blanket to wrap around a human torch (ensure you replace after every use).

Legend x Not applicable a Applicable

HOW TO USE A FIRE EXTINGUISHER

Extinguishers come in a number of shapes and sizes. They all operate in a similar manner. Here’s an easy acronym for extinguisher use:

P PULL the pin on the extinguisher

A AIM the fire extinguisher at the base of the fire and stand 2m away from the fire

S SQUEEZE the handle of the extinguisher

S SWEEP the extinguisher left to right, while aiming at the base of the fire


Dry Chemical Extinguishers

ABE fire extinguishers are recommended for fires where wood, paper, flammable liquid or live electrical equipment are involved.

• Electrical switchboards• Vehicles• Boats and caravans• Garages• Buses• Flammable liquid road tankers

• 40% Monoammonium Phosphate (MAP) powder (except 4.5kg ABE90 model)

• Stainless steel handle and trigger (excluding 1kg)• Mild steel polyester powder coated cylinder• Transport style pull out pin• Ready for use pressure indicator• Forged brass valve• Zinc-plated steel wall mounting bracket• Light duty bracket available for use in light commercial vehicles, buses and

4-wheel drives• Heavy duty bracket available for use on large vehicles and equipment

subjected to strong vibration

Model Number E1DA - 2040/13 E15DA - 2042/13 E15DAH -2042/13H

Type ABE ABE ABE

Extinguishant ABE40 Dry Chemical Powder ABE40 Dry Chemical Powder ABE40 Dry Chemical Powder

Capacity 1kg 1.5kg 1.5kg

Discharge Fitting Nozzle Nozzle Rubber Hose / Nozzle

Certification AS1841 AS1841 AS1841

Total Mass 1.7kg 2.7kg 2.8kg

Test Pressure 2 Mpa 2 Mpa 2 Mpa

Operating Pressure 1000 kPa 1000 kPa 1000 kPa

Rating 1A:10B:E 2A:30B:E 1A:20B:E

Dimensions 307 H 98 W 79.6 D 366H 116W 88.7 D 366H 176W 88.7 D

Discharge Time (seconds) 8-11 11-14 10-13

Cylinder Mild Steel Mild Steel Mild Steel

Cylinder Finish Polyester Powder Coat Polyester Powder Coat Polyester Powder Coat

Valve Construction Forged Brass Forged Brass Forged Brass

Valve Finish Brass Brass Brass

Handles and Trigger Construction Mild Steel Stainless Steel Stainless Steel

Handles and Trigger Finish Polyester Powder Coat Stainless Steel Stainless Steel

Bracket Small (70040) Light Vehicle (70011) Light Vehicle (70011)

Service Temperature -50C to 650C -50C to 650C -50C to 650C

Our ABE dry chemical fire extinguishers are suitable for use in:

Our Dry Chemical Extinguishers feature:


Dry Chemical ExtinguishersModel Number E23DA - 2035/13 E25DA - 2003/13 E45DA - 2046/13

Type ABE ABE ABE

Extinguishant ABE40 Dry Chemical Powder ABE40 Dry Chemical Powder ABE90 Dry Chemical Powder

Capacity 2.3kg 2.5kg 4.5kg

Discharge Fitting Rubber Hose / Nozzle Rubber Hose / Nozzle Rubber Hose / Nozzle



Test Pressure 2 Mpa 2 Mpa 2.025 Mpa

Operating Pressure 1000 kPa 1000 kPa 1350 kPa

Rating 2A:40B:E 3A:40B:E 4A:80B:E

Dimensions 440H 170W 105 D 355H 223W 126.4 D 470H 225W 140 D


Cylinder Mild Steel Mild Steel with skirt Mild Steel with skirt

Cylinder Finish Polyester Powder Coat Polyester Powder Coat Polyester Powder Coat



Handles and Trigger Construction Stainless Steel Stainless Steel Stainless Steel

Handles and Trigger Finish Stainless Steel Stainless Steel Stainless Steel

Bracket Light Vehicle (70084) Wall Small (103889) Wall Small (103889)


Model Number E9DA - 2008/13

Type ABE

Extinguishant ABE40 Dry Chemical Powder

Capacity 9kg

Discharge Fitting Rubber Hose / Nozzle

Certification AS1841

Total Mass 14.7kg

Test Pressure 2 Mpa

Operating Pressure 1000 kPa

Rating 6A:80B:E

Dimensions 641H 239W 179 D

Discharge Time (seconds) 20-25

Cylinder Mild Steel with skirt

Cylinder Finish Polyester Powder Coat

Valve Construction Forged Brass

Valve Finish Brass

Handles and Trigger Construction Stainless Steel

Handles and Trigger Finish Stainless Steel

Bracket Wall - large (103888)

Service Temperature -50C to 650C


Carbon Dioxide fire extinguishers can safely be used in:

• Laboratories• Hospitals• Nursing homes• Educational facilities• Manufacturing facilities• Electrical switch rooms

• Stainless steel handle and trigger• Light weight aluminium alloy cylinder• Polyester powder coated cylinder• Transport style pull out pin• Forged brass head• Zinc-plated steel wall mounting bracket

Carbon Dioxide Extinguishers

Model Number E2C - 3000/13 E35C - 3001/13 E5C - 3002/13

Type CO2 CO2 CO2

Extinguishant Carbon Dioxide Carbon Dioxide Carbon Dioxide

Capacity 2kg 3.5kg 5.0kg

Discharge Fitting Horn Hose and Horn Hose and Horn



Test Pressure 22 Mpa 22 Mpa 22 Mpa

Operating Pressure ~5.6 Mpa @ 21oC ~5.6 Mpa @ 21oC ~5.6 Mpa @ 21oC

Rating 2B:E 5B:E 10B:E

Dimensions 530H x 318W x 111 D 575H x 300-430W x 140 D 670H x 300-430W x 152 D


Cylinder Aluminium Aluminium Aluminium

Cylinder Finish Powder Coat Powder Coat Powder Coat



Handles and Trigger Construction Stainless Steel Stainless Steel Stainless Steel

Handles and Trigger Finish Stainless Steel Stainless Steel Stainless Steel

Bracket Wall - small (103899) Wall - small (103899) Wall - large (103888)


Our Carbon Dioxide (CO2) fire extinguishers are recommended for Class ‘E’ electrical hazard fires, but also have limited capabilities for extinguishing small, indoor Class ‘A’ paper and Class ‘B’ flammable liquid fires.

Our Carbon Dioxide Extinguishers feature:


Water Extinguishers

Water fire extinguishers are recommended for Class ‘A’ fires that involve combustible materials such as wood, paper, rubbish and fabrics. These extinguishers should not be used on flammable liquid or live electrical equipment fires.

• Offices• Warehouses• Store rooms• Schools• Hotels• Homes

Model Number E91W - 1000/13

Type Water

Extinguishant Water

Capacity 9 litres

Discharge Fitting Rubber Hose / Jet Nozzle


Total Mass 12.5kg

Test Pressure 2 Mpa


Rating 3A

Dimensions 625 H 235 W 179 D

Discharge Time (seconds) 60 - 80

Cylinder Stainless Steel


Valve Construction Brass

Valve Finish Brass




Service Temperature 50C to 650C

Our water fire extinguishers are suitable for use in:


Wet Chemical Extinguishers

• Stainless steel handle, trigger and cylinder• Durable polyester powder coated finish cylinder• Transport style pull out pin• Ready for use pressure indicator• Plated forged brass valve• Zinc-plated steel wall mounting bracket• Heavy duty bracket available for use on commercial

vehicles

Model Number E7A - 1012/13

Type Wet Chemical

Extinguishant Wet Chemical Solution

Capacity 7.5 litres

Discharge Fitting Rubber Hose / Spray Nozzle


Total Mass 13.2kg

Test Pressure 2 Mpa


Rating 3A:4F






Valve Finish Plated





Our wet chemical fire extinguisher features:Wet chemical fire extinguishers contain a liquid extinguishing agent, specifically developed to extinguish kitchen range, cooking oil and fat fires. Our wet chemical fire extinguisher is recommended for use in all kitchens. This extinguisher should not be used on fires involving live electrical equipment or flammable liquids.


• Flammable liquid stores• Flammable liquid road tankers• Flammable liquid processing

plants• Loading docks

Reliable, Compliant Service

All fire extinguishers are required to be regularly tested, maintained

and serviced in accordance with Australian Standard 1851. Routine scheduled testing and

service of your fire extinguishers checks that they are functioning correctly and are appropriate for

your fire risks.

Quality Guaranteed

purchase.

Foam fire extinguishers are recommended for Class ‘B’ fires where flammable and combustible liquids such as petrol, paint and solvents are involved. They can also safely be used to extinguish Class ‘A’ fires.

Foam Extinguishers

All AWFS fire extinguishers are guaranteed against faults in

materials and workmanship for a period of two years from date of

Type Foam

Extinguishant Angus Tridol S AFFF 3%

Capacity 9 litres

Discharge Fitting Rubber Hose / Aspirating Nozzle


Total Mass 12.5kg

Test Pressure 2 Mpa


Rating 3A:20B






Valve Finish Brass





Model Number E91F - 1002/13

Foam fire extinguishers are not suitable for use on fires involving live electrical equipment. Our foam fire extinguishers can be used in:

Madalyn

Rectangle

Documents

2015 Product Catalogue - Fire Safety Equipment & Supplies€¦ · Fire Extinguisher Use There are different types of fire extinguishers for different types of fire hazards. Class