2018 Training

DirectoryBT University

Table of Contents

Building Automation 5

Desigo CC Master Operator Training Path 6-8

Insight Master Operator Training Path 9-12

PPCL Master Programmer Training Path 13-15

Field Panel and FLN Curriculum 16-18

Supplemental Training Courses 19-20

Web-Based Training Courses 21-24

Security 25

SiPass Integrated 26

Fire and Life Safety 27

Training by Management Station 28-30

Desigo Fire Safety Modular Training 31-33

Desigo Life Safety Training 34-35

Cerberus PRO Modular Training 36-38

Cerberus PRO Training 39-40

MXL Training 41-43

Additional Training Offerings 44

Certification Training 45

KNX Certification (GAMMA Lighting) 46

Training Enrollment Form 47Notes 48

Welcome to BT University! 2

1

Introduction to the Learning EnvironmentIn today's competitive market, a highly skilled workforce is vital for success. Our training offerings integrate best practices and new learning technologies to offer flexibility in maximizing your training dollars.

• Instructor-Led Training with Hands-on Training Simulators• Web-Based Training• Virtual Instructor-Led Training• Customized Training Offerings• Onsite Training

One in five workers do not have up-to-date professional skills*. Through training, keep current and help bridge the skills gap.

Training Paths: Building the Bridge in the Skills GapA training path is a road map that is your guide to lead you to master level skills. Our award-winning training paths have been found to:

• Improve productivity• Increase job satisfaction• Gain on-the-job confidence• Take the guess work out of class selection

To start your journey, we have free web-based training offerings in the training paths. After you launch the course on ES Online, BT University assigns you a training path.

ES Online, www.siemens.com/esonline, is our Learning Management System where you can access your training path, view your training history, locate upcoming classes, launch web-based training and obtain copies of your course certificates.

* Study conducted by Harris Poll

Welcome to BT University!

Welcome

2

Building Automation Training Offerings

Key to the Graphic SymbolsBT University provides a wide range of Building Automation, Fire and Security training classes to help you understand and manage your system and optimize its functionality. We are your partner in maximizing your performance to ensure you have the skills to provide superior building functionality.

Through your learning journey, you will encounter a variety of learning opportunities.

Instructor-Led

Our classroom training provides an objective based curriculum and includes hands-on labs to allow students to practice with the Siemens hardware and software. Our classes are offered nationwide and can be brought onsite to your facility.

Virtual Instructor-Led

The Virtual Instructor-Led classes offer you a classroom experience but with no travel expenses and the flexibility to work around your schedule. The courses are taught using the GoToTraining software and can be delivered anywhere there is an internet connection.

Web-Based

Our self-paced, web-based training allows you to select topics specific to your needs and set your own pace for completing the chosen courses. These courses are available through ES Online.

Length of an instructor-led course in days

Length of a virtual instructor-led or a web-based course in hours

Click to request enrollment on ES Online or log on at www.siemens.com/esonline

Click for the full course description or go to www.usa.siemens.com/btuniversity

Our robust curriculum is developed and taught by our team of factory certified instructors.

Customized

We have the ability to customize training to meet your specific needs. Whether it is incorporating topics from multiple classes into one new class or using site specific examples, we will work with you to ensure you get exactly what you need.

Welcome

3

People spend about 90 percent of their lives indoors. Buildings are not just a place for working and living. They are the places where we spend our lives.

"All around the world, buildings provide environments for people to do the things they want to do.Places to play. Places to learn. Places to work. Places to grow. Places to innovate. Places to succeed.We believe that the places we spend time in have a great influence on our lives. They affect how we grow, how we develop, what we achieve, who we become. We at Building Technologies work every day to improve buildings - and therefore people's lives. We are creating perfect places. It is our inspiration, our vision." - Matthias Rebellius CEO Siemens Building Technologies

BT University is your trusted advisor and partner in keeping your building energy efficient, safe and secure. You invested in your building to make it the perfect place for all occupants, let BT University help ensure you have the knowledge and skills to operate and maintain that investment.

This book is your guide through the learning environment. Explore the offerings and contact us at btuniversity.i-bt@siemens.com for any of your training needs.

Welcome

4

Building Automation Training Offerings

Introduction to Desigo CC ST 101(Web-Based)

Desigo CC Workstation IST 9203(Instructor-Led)

Desigo CC ReportsST 500(Virtual Instructor-Led)

Desigo CC Workstation IIST 9254(Instructor-Led)

Desigo CC Refresher (optional)ST 501(Virtual Instructor-Led)

Desigo CC Master OperatorST 9273(Instructor-Led)

Desigo CCTake control of your professional development by completing the Desigo CC Master Operator Training Path. The Desigo CC Master Operator Training Path provides the critical knowledge to confidently make informed decisions when navigating through the Desigo CC Management Station.

Each class in the path builds upon each other ending with a capstone scenario based training class. Knowledge and skills assessments are part of the instructor-led classes to provide an opportunity for you to assess the knowledge gained during the class and prove your proficiency in operating a Desigo CC Management Station.

For experienced operators, a test-out is available for the ST 9203 - Desigo CC Workstation I class. The test-out is available at: www.siemens.com/esonline.

$1950

$0

$450

$2195

$400

$1950

Hours

Days

Hours

Days

Hours

Days

Desigo CC Master Operator Training Path

Building Automation

6

Introduction to Desigo CC

Course Code: ST 101

Target AudienceFor users who need an overview of the Desigo CC Management Station.

PrerequisitesNone

DescriptionThis web-based training course provides an introduction to the Desigo CC Management Station.

ObjectivesUpon completion of the course, students should be able to:

• Understand how Desigo CC pullstogether multiple disciplines

• Understand the layout andworkflow of Desigo CC

• Use basic applications such as:Graphics, Event Treatment,Trending, Reporting andScheduling

Topics• Platform Design• Workflow• Applications

Desigo CC Workstation I

Course Code: ST 9203

Target AudienceFor users of Desigo CC whose role is to perform day-to-day operations on a Desigo CC Management Station.

PrerequisitesNone

DescriptionLearn how to monitor and control your Desigo CC Management Station through hands-on guided exercises and discussions. A scenario-based skills assessment at the end of the course allows you to put into practice the knowledge you have learned.

Objectives Upon completion of the course, students should be able to:

• Perform Event Management• Explain the workflow of Desigo CC• Navigate a Desigo CC graphic• Command and release points from

a graphic• Manually collect trend data• Utilize Log Viewer to locate

historical data• Run, execute, modify and save

reports• Initiate Remote Notification

Topics• Navigation• Event Management• Commanding from Graphics• Trending• Scheduler• Log Viewer• Reports• Remote Notification• Knowledge Assessment• Skills Assessment

Desigo CC Reports

Course Code: ST 500

Target AudienceFor users of Desigo CC who need to retrieve data from the Desigo CC SQL database and display it in a meaningful manner.

PrerequisitesCompletion of the ST 9203 - Desigo CC Workstation I course is recommended

DescriptionLearn to effectively use the Desigo CC Report application and its associated features.

This course is comprised of three 90 minute sessions that are taught virtually.

ObjectivesUpon completion of the course, students should be able to:

• Create a new report folder• Open an existing report• Navigate the report panes and

explore various viewing options• Add graphics, trends or a log view

definition to a report• Adjust report formatting to include

font, layout and page setup• Generate filters for some of the

more commonly used reports• Setup Report output routing• Execute reports as a PDF, Excel or

CSV file

Topics• Basic Navigation• Run a Report• Modify an Existing Report• Adjust Report Data Filters• Execute a Report

Building Automation

7

Desigo CC Workstation II

Course Code: ST 9254

Target AudienceFor advanced users of Desigo CC whose role is to create and modify graphics, security groups and user accounts.

PrerequisitesST 9203 - Desigo CC Workstation I

DescriptionBuilding on Desigo CC Workstation I, you will learn how to build and modify system objects. A scenario-based skills assessment at the end of the course allows you to put into practice the knowledge you have learned.

ObjectivesUpon completion of the course, students should be able to:

• Modify intrinsic alarm settings• Create notification class objects• Modify an existing schedule• Build a system schedule from

scratch• Modify an existing graphic• Use the evaluation editor• Understand how Desigo CC uses

the address book• Create new users• Configure security settings• Use the log viewer to locate

historical data• Modify a report• Create new scopes• Use scopes to control user access

to system objects• Monitor an active remote

notification• Configure contact and escalation

rules

Topics• Alarm Configuration• Scheduling• Graphics• Address Book• Users and Security• Log Viewer and Reports• Scopes• Remote Notification• Knowledge Assessment• Skills Assessment

Desigo CC Refresher

Course Code: ST 501

Target AudienceFor users of Desigo CC who need to refresh their skills on the current market package of the Desigo CC Management Station.

This course is optional and not required to earn Master Operator status.

PrerequisitesCompletion of the ST 9203 - Desigo CC Workstation I course is recommended

DescriptionRefresh your knowledge on the Desigo CC Management Station. You will interact with a live online instructor and other students to work through real-world scenarios using Desigo CC.

This course is comprised of two 2 hour sessions that are taught virtually.

ObjectivesUpon completion of the course, students should be able to:

• Use various treatment options to acknowledge and reset alarms

• Demonstrate how to command and release points

• Create new and open existing trends

• Configure the reports output definition to execute a report to a PDF file or an email

• Modify intrinsic alarm configurations and create event enrollment objects

• Build a BACnet object• Utilize Simple, Linear and Discrete

Evaluations• Create Desigo CC Users• Create new and modify existing

scopes• Create new and modify existing

Remote Notifications

Topics• Alarm Configuration• Graphics Editor• Trending• Reports• Scopes

Desigo CC Master Operator

Course Code: ST 9273

Target AudienceFor advanced users of Desigo CC whose role is to perform configuration changes and troubleshoot using the Desigo CC Management Station.

PrerequisitesST 9203 - Desigo CC Workstation I and ST 9254 - Desigo CC Workstation II

DescriptionConfigure and modify applications within Desigo CC to increase your efficiency in monitoring and controlling building systems.

Upon successful completion of the training path, you will earn Master Operator status on the latest Desigo CC market package.

ObjectivesUpon completion of the course, students should be able to:

• Demonstrate automatic and non automatic symbol association

• Create point properties on a graphic

• Create graphical elements that appear and/or disappear on a graphic

• Modify a template graphic for all TECs of the same application

• Associate an object or a point to a document

• Apply customer views related for divisions, roles or equipment

• Perform database maintenance at the field panel level, project level and SQL server level

• Use Desigo CC as a troubleshooting tool to identify an abnormal condition

Topics• Troubleshooting• Graphics• Database Configuration• Conditional Trending• Reaction Processor• User Accounts• Security Groups• Custom Scopes and Views• Database Maintenance

Building Automation

8

Insight Master Operator Training Path

Insight BasicsST 102(Web-Based)

Insight Workstation IST 6203(Instructor-Led)

Insight ReportsST 502(Virtual Instructor-Led)

Insight Workstation II or

Insight Workstation II with BACnetST 6254 or ST 7254(Instructor-Led)

Insight Refresher (optional)ST 503(Virtual Instructor-Led)

Hours

Insight Master OperatorST 6273(Instructor-Led)

The Insight Master Operator Training Path provides information on the Insight Workstation platform that has been proven in the building automation industry for over 19 years.

Each class in the path builds upon each other ending with a capstone scenario-based training class. Knowledge and skills assessments are part of the instructor-led classes to provide an opportunity for you to assess the knowledge gained during the class and prove your proficiency in operating an Insight Workstation.

To help guide you to the correct path, if your building has Ethernet or P2 panels with P1 Terminal Equipment Controllers, then you should complete the ST 6254 - Insight Workstation II course. If your building uses a BACnet communication protocol, then you should complete the ST 7254 - Insight Workstation II with BACnet course. For assistance in determining the class to attend, contact BT University at btuniversity.i-bt@siemens.com.

Insight$0

$1950

$450

$2195

$400

$1950

Days

Days

Hours

Days

Hours

Building Automation

9

Insight Basics

Course Code: ST 102

Target AudienceFor users who need an overview of the Insight Workstation.

PrerequisitesNone

DescriptionThis web-based training course introduces common Insight applications.

ObjectivesUpon completion of the course, students should be able to:

• Navigate through graphic links• Display information text and alarm

messages• Command a point from a graphic• Acknowledge an alarm• Add a point memo• Start the Report Viewer application• Run a report• Run a Panel Point Log Report• Customize the Insight main menu

Topics• Graphics• Alarm Status• Main Menu• Report Viewer• Panel Point Log Screen

Insight Workstation I

Course Code: ST 6203

Target AudienceFor users of Insight whose role is to perform day-to-day operations on an Insight Workstation. For experienced operators, a test-out is available at www.siemens.com/esonline.

PrerequisitesNone

DescriptionLearn how to monitor and control your Insight Workstation through hands-on guided exercises and discussions. A scenario-based skills assessment at the end of the course allows you to put into practice the knowledge you have learned.

Objectives Upon completion of the course, students should be able to:

• Treat an active point in alarm• Add a point memo and recognize

informational text• Manage alarms from a graphic• Describe Distributed Digital Control

(DDC)• Run a Panel Point Log report• Describe how commanding a point

affects building operation• Interpret the operations of an

existing schedule• Explain the differences between

historical, dynamic and combineddynamic plots

Topics• HVAC Concepts• Alarm and Network Messages• System Tools• Network Status• Point Evaluation, Command and

Control• Trend Data• Scheduling• Dynamic Plotter• Knowledge Assessment• Skills Assessment

Insight Reports

Course Code: ST 502

Target AudienceFor users of Insight whose role requires knowledge of the reporting capabilities available at the Insight Workstation.

PrerequisitesCompletion of the ST 6203 - Insight Workstation I course is recommended

DescriptionLearn how to create multiple reports and how to leverage the data to increase troubleshooting and operational efficiency.

This course is comprised of three 90 minute sessions that are taught virtually.

ObjectivesUpon completion of the course, students should be able to:

• Describe the what, where, howand why of Insight Reports

• Run the following reports:• Panel Point Log• Panel Point Definition• System Activity Log• Panel Point Usage• Panel PPCL• Application Subpoint Display

• Use the Insight Report Builder• Identify practical application of

retrieved data

Topics• Reports Overview• Panel Point Log• Report Builder• Running Reports

Building Automation

10

Insight Workstation II

Course Code: ST 6254

Target AudienceFor advanced users of Insight whose role is to create and modify points, graphics, user accounts, zones and events.

This class is for you if your facility has Siemens proprietary field panels.

PrerequisitesST 6203 - Insight Workstation I

DescriptionBuilding on Insight Workstation I, you will learn how to build and modify system objects. A scenario-based skills assessment at the end of the course allows you to put into practice the knowledge you have learned.

ObjectivesUpon completion of the course, students should be able to:

• Use System Profile to edit thesystem architecture

• Create and modify points• Put points into trend• Assign privilege levels to user

accounts• Add objects to Access Groups• Create a logical series of links

between dynamic graphics• Create a new Event and Zone• Describe features of Program Editor• Describe how Scheduler works• Backup and restore the system

database• Utilize the System Activity Log to

track system activity

Topics• System Architecture• Points• User Accounts• Enhanced Alarming• Graphics• Event Builder• Program Editor• Scheduler• Database Utilities• Knowledge Assessment• Skills Assessment

Insight Refresher

Course Code: ST 503

Target AudienceFor users of Insight who need to refresh their skills on the Insight Workstation.

This course is optional and not required to earn Master Operator status.

PrerequisitesCompletion of the ST 6203 - Insight Workstation I course is recommended

DescriptionRefresh your knowledge on the Insight Workstation. Students will interact with a live online instructor and other students to work through real-world scenarios using Insight.

This course is comprised of two 90 minute sessions and one 60 minute session that are taught virtually.

ObjectivesUpon completion of the course, students should be able to:

• Identify the types of Insight TrendReports

• Demonstrate adding multiplepoints into trend using TrendWizard

• Discuss the fundamentalrelationship in Insight betweenpoints, zones, schedules and PPCL

• Demonstrate how to schedulezones and events

• Explain the functions of theDatabase Transfer Application

• Demonstrate how to backup andrestore a database using theInsight backup utility

Topics• Trending• Equipment• Scheduling• Database Utilities

Insight Workstation II with BACnet

Course Code: ST 7254

Target AudienceFor advanced users of Insight with BACnet whose role is to create and modify points, graphics, user accounts, zones and events.

This class is for you if your facility has Siemens BACnet field panels or a combination of Siemens BACnet field panels and Siemens proprietary field panels.

PrerequisitesST 6203 - Insight Workstation I

DescriptionBuilding on Insight Workstation I, you will learn how to build and modify system objects. A scenario-based skills assessment at the end of the course allows you to put into practice the knowledge you have learned.

ObjectivesUpon completion of the course, students should be able to:

• Use System Profile to edit thesystem architecture

• Create and modify points• Assign privilege levels to user

accounts• Create alarm messages and build

BACnet notification classes• Use Micrografx Designer to create

background graphics• Create a BACnet command object• Use BACnet scheduling to add a

new calendar and schedule• Backup and restore the database• Utilize the System Activity Log to

track system activity

Topics• System Architecture• Points• User Accounts• BACnet Alarms• Graphics• Equipment Scheduling• Program Editor• Scheduler• Database Utilities• Knowledge Assessment• Skills Assessment

Building Automation

11

Insight Master Operator

Course Code: ST 6273

Target AudienceFor advanced users of Insight whose role is to perform configuration changes and to troubleshoot using the Insight Workstation.

PrerequisitesST 6203 - Insight Workstation I and ST 6254 - Insight Workstation II orST 7254 - Insight Workstation II with BACnet

DescriptionConfigure and modify applications within Insight to increase your efficiency in monitoring and controlling building systems.

Upon successful completion of the training path, students will earn Master Operator status on Insight version 3.15.

ObjectivesUpon completion of the course, students should be able to:

• Create individual user accountswith assigned privileges

• Verify system configuration andconnectivity

• Import and enable a PPCL program• Schedule zones and mode points• Import and enable a PPCL program

to control the system• Create report templates and run

reports to verify proper systemoperation and configuration

• Create and modify graphics tomonitor system operation

• Create trend definitions and trendreports

• Schedule recurring backups of theInsight database

• Use Insight as a troubleshootingtool to identify an abnormalcondition

Topics• Troubleshooting• User Accounts• System Profile• Trending• Database Maintenance• Graphics• Database Operations

Building Automation

12

PPCL Master Programmer Training Path

Introduction to Control ProgrammingST 103(Web-Based)

PPCL Programming IST 6304(Instructor-Led)

PPCL Programming II ST 6354(Instructor-Led)

PPCL Syntax ReviewST 104(Web-Based)

Hours

PPCL Master Programmer ST 6373(Instructor-Led)

PPCL ProgrammingLearn Powers Process Control Language (PPCL) in simple and easy steps starting from basic to advanced concepts.

Each class builds upon each other ending with a capstone scenario-based training class. To become a Master Programmer, you will need to complete the required classes in the training path.

This training path is not based on a management station so if your facility uses PPCL, this training path is for you.

$0

$2195

$2195

$150

$1950

Days

Days

Days

Hour

Building Automation

13

Introduction to Control Programming

Course Code: ST 103

Target AudienceFor users whose role is to work with Powers Process Control Language (PPCL) and the Program Editor.

PrerequisitesNone

DescriptionThis web-based training course covers the flow and functionality of creating, editing and saving a building's control program.

ObjectivesUpon completion of the course, students should be able to:

• Define a PPCL program• Define how a control program is

structured• Identify the logical flow of a typical

control program• Define the 5 steps of writing a

control program• Navigate and perform multiple

operations using Program Editor• Save and download a modified

program to a field panel• Run a Panel PPCL Report for testing

and troubleshooting a control program

Topics• Program Editor• Building Automation PPCL

Programs• PPCL Reports

PPCL Programming I

Course Code: ST 6304

Target AudienceFor users whose role is to read or develop PPCL programs.

PrerequisitesST 103 - Introduction to Control Programming

DescriptionLearn to develop and modify a PPCL program. A scenario-based skills assessment at the end of the course allows you to put into practice the knowledge you have learned.

Objectives Upon completion of the course, students should be able to:

• Create a decision table and flowchart for a sequence of operation

• Use the five-step problem solving process to write PPCL programs

• Use Datamate Advanced to access the Program Editor application

• Run PPCL reports using the Report Builder application

• Describe and use the features of Program Editor

• Use various navigational tools in Program Editor

• Write a control LOOP to modulate equipment

• Use a dead band for cycling equipment on and off

• Write PPCL code to command FLN devices

• Use Report Builder to test and troubleshoot programs

• Use the Point Monitor to monitor point commands by the PPCL program

Topics• Programming Planning and

Flowcharts• PPCL Syntax• Datamate Advanced• Program Editor• Point Control• FLN Devices• Troubleshooting• Skills Assessment

PPCL Syntax Review

Course Code: ST 104

Target AudienceFor advanced users who need to write or edit PPCL statements using proper syntax.

PrerequisitesST 6304 - PPCL Programming I

DescriptionThis web-based course provides information on PPCL syntax and structure.

ObjectivesUpon completion of the course, students should be able to:

• Use decision tables• Identify and interpret flowchart

symbols• Define Resident Points• Understand use of local variables• Define Point Status Indicators and

Logical Operators• Write PPCL statements for a variety

of basic control strategies using proper syntax

Topics• PPCL Rules and Guidelines• PPCL Statement Review• PPCL Composition

Building Automation

14

PPCL Programming II

Course Code: ST 6354

Target AudienceFor advanced users whose role is to create or modify programs using advanced program control strategies for energy efficiency.

PrerequisitesST 6304 - PPCL Programming I

DescriptionLearn to build and optimize PPCL programs to improve building efficiency and incorporate staging and rotating of equipment. A scenario-based skills assessment at the end of the course allows you to put into practice the knowledge you have learned.

ObjectivesUpon completion of the course, students should be able to:

• Modify system settings to support an Optimized Zone

• Build a program to support an Optimized Zone (SSTO)

• Modify programs to automatically rotate equipment based on a schedule or run time

• Alter programs to ensure the proper number of devices are operating at any given time

• Adjust LOOP gains to ensure efficient equipment performance

• Modify an existing program to use the Adaptive Loop Control

• Add programming code to determine the optimum position of the outside air dampers based on enthalpy

• Design a program to control a variable volume air handler

Topics• Ramping• Rotating Equipment• Staging Equipment• Cascading and Floating Loops• Adaptive Control• Enthalpy Optimization• Peak Demand Limiting• VAV Control• Start/Stop Time Optimization• Skills Assessment

PPCL Master Programmer

Course Code: ST 6373

Target AudienceFor advanced users whose role is to troubleshoot and to implement programming strategies.

PrerequisitesST 6304 - PPCL Programming I andST 6354 - PPCL Programming II

DescriptionThis course provides complex PPCL programming scenarios for you to read, troubleshoot and correct. Upon successful completion of the training path, students will earn Master Programmer status.

ObjectivesUpon completion of the course, students should be able to:

• Troubleshoot and correct an air handler control strategy

• Implement control strategies based on a sequence of operations

• Identify ways to improve existing control strategies

• Discuss multiple options for staging and rotating the equipment• Daily• Weekly• Totalization• Fail Safe

• Develop and test a chiller and secondary equipment staging and rotating program

Topics• Troubleshooting• Control Strategies• Staging and Rotating• Sequencing of Equipment• PPCL Scenarios• Datamate Advanced

Building Automation

15

Field Panel and FLN Curriculum

Introduction to Terminal Equipment ControllersST 105(Web-Based)

Field Panel and FLN OperationsST 5504(Instructor-Led)

PXC-Modular Field Panel and TX-I/OST 106(Web-Based)

DXR and ABT Site Training

Contact BT University for DXR and ABT Site training offerings

BACnet Field Panel Web ServerST 7454(Instructor-Led)

$0

$50

$2195

$2195

Days

Days

Hours

Hours

HardwareThe Field Panel and FLN Curriculum teaches how to use software tools to communicate to the devices at a local level.

For assistance in determining the class to attend, contact BT University at btuniversity.i-bt@siemens.com.

Building Automation

16

Introduction to Terminal Equipment Controllers

Course Code: ST 105

Target AudienceFor users whose role is to monitor, interpret and command Terminal Equipment Controllers (TECs) direct connection subpoint data.

PrerequisitesNone

DescriptionThis web-based training course explains the basic operation, interaction and function of a TEC.

ObjectivesUpon completion of the course, students should be able to:

• State the purpose of TECs• Describe the physical components

of a TEC• Describe how to communicate

with a TEC locally• Describe the different types of

subpoints• Set a minimum and maximum

room temperature setpoint• Trace the generation of the

temperature control setpoint

Topics• TEC Basics• TEC Components• TEC Subpoints• Datamate Base Operations• TEC Operations

PXC-Modular Field Panel and TX-I/O

Course Code: ST 106

Target AudienceFor users whose role is to work with the PXC-Modular Field Panel.

PrerequisitesNone

DescriptionThis web-based training course explains the operation and features of the PXC-Modular Field Panel.

ObjectivesUpon completion of the course, students should be able to:

• Identify hardware components• Describe how to expand the point

count of the PXC-Modular field panel

• Describe the power requirements of the PXC-Modular field panel

• Identify the available options• Identify the features that the

PXC-Modular field panel supports on the system architecture

• Describe the TX-I/O point modules and their use

Topics• PXC Modular Series Product

Overview• APOGEE Automation Networking• Principles of PXC Modular

Operation• TX-I/O Product Line

Field Panel and FLN Operations

Course Code: ST 5504

Target AudienceFor users whose role is to control and monitor building control systems from field panels and Terminal Equipment Controllers.

PrerequisitesST 105 - Introduction to Terminal Equipment Controllers

DescriptionLearn to monitor, control and configure building automation systems locally from field panels and FLN devices using Datamate Advanced. A scenario-based skills assessment at the end of the course allows you to put into practice the knowledge you have learned.

This course covers proprietary and BACnet protocols.

ObjectivesUpon completion of the course, students should be able to:

• Communicate with ALN and FLN devices

• Create and command points at the ALN level

• Identify the three types of subpoints in a Terminal Equipment Controller

• Display FLN subpoint information at the field panel

Topics• Datamate Advanced Field Panel• Terminal Emulation• System Profile• Database Operations• Point Operations• FLN Hardware• Knowledge Assessment• Skills Assessment

Building Automation

17

BACnet Field Panel Web Server

Course Code: ST 7454

Target AudienceFor users whose role is to use Siemens BACnet Field Panel Web Server to interface with BACnet field panels.

PrerequisitesNone

DescriptionLearn to navigate and edit BACnet field panel databases using Field Panel Web Server.

ObjectivesUpon completion of the course, students should be able to:

• Identify the required hardware that supports the BACnet Web Server

• Navigate through Siemens Launch Pad

• Utilize the status bar and navigation pane interfaces and device/points icons and messages

• Create, edit and assign a Notification Class object

• Create and modify various point types

• Utilize Dynamic Trending and Command Priority Array

• Create a BACnet calendar object, a command object and a schedule object

• Describe how to compile and debug a program

• Utilize the FLN Device Editor to view and add FLN devices to the network

• View, backup and restore a field panel and FLN device

• Create and edit ALN User Accounts

Topics• BACnet Field Panel Web Server• User Interface Applications• Notification Classes• Point Editor• Point Commander• Schedule/Command Object/

Calendar View• PPCL Editor• System Configuration

Building Automation

18

Supplemental Training Courses

Fume Hood and Laboratory Room ControlsST 6704(Instructor-Led)

InfoCenter SuiteST 6523(Instructor-Led)

Advanced GraphicsST 6603(Instructor-Led)

$1950

$1950

$2195

Days

Days

Days

InfoCenter Suite

Course Code: ST 6523

Target AudienceFor users whose role is to administer the data collected by an Insight system using InfoCenter Suite software.

PrerequisitesNone

DescriptionLearn to archive, manage and retrieve large amounts of building automation system data for validation compliance and management reporting.

ObjectivesUpon completion of the course, students should be able to:

• Explain how InfoCenter data is generated by an Insight system

• Mount and dismount volumes• Create point groups• Annotate and modify point values• Identify the different point types

and their properties• Import and export system data• Archive and purge system data• Create customized reports• Run reports manually or by a

schedule

Topics• System Architecture• InfoCenter Administrator• InfoCenter Points• InfoCenter Data• InfoCenter Report Manager

Building Automation

19

Advanced Graphics

Course Code: ST 6603

Target AudienceFor users whose role includes updating graphics on the Insight Workstation to match their current equipment layout.

PrerequisitesST 6203 - Insight Workstation I

DescriptionLearn to develop and modify cliparts, air handler and chiller backgrounds and incorporate the Enhanced Graphics Option (EGO) features into new or existing graphics.

Objectives Upon completion of the course, students should be able to:

• Use Micrografx Designer to create and edit background graphics and clipart files

• Access and use the Navigator Library

• Add or remove Version 2 clipart files to a background

• Use the Graphics features of Insight to create dynamic graphics

• Insert animation on a background graphic

• Create Enhanced Graphic Objects such as; pie charts, bar charts and angular gauges

• Make the Enhanced Graphic object commandable

• Import an existing graphic• Incorporate changes to an existing

graphic

Topics• Micrografx Designer• Navigator Library• Insight Graphics• Enhanced Graphic Options (EGO)• Modify an Existing Graphic

Fume Hood and Laboratory Room Controls

Course Code: ST 6704

Target AudienceFor users whose role is to monitor laboratory controls using an Insight Workstation.

PrerequisitesNone

DescriptionLearn to monitor and control laboratory spaces through hands-on guided exercises and discussions.

ObjectivesUpon completion of the course, students should be able to:

• Identify components of a Fume Hood and Siemens Fume Hood Controls

• Interpret the readings on an Operator Display Panel

• Describe how a LCM-OAVS controls room pressurization, ventilation and temperature

• Describe the sequence of operation for the Siemens Room Condition Monitor (SRCM) and Room Pressure Monitor

• Use the Insight workstation to monitor and command subpoints

• Setup and identify supervised points

Topics • Fume Hood Control Strategy• Lab Room Control Strategy• Room Pressurization Control and

Monitoring• Accessing Information• Compliance Support Option

Building Automation

20

Web-Based Training Courses

Insight SchedulerST 107(Web-Based)

Insight TrendingST 108(Web-Based)

Remote NotificationST 110(Web-Based)

Introduction to Desigo CCST 101(Web-Based)

Insight BasicsST 102(Web-Based)

Introduction to Terminal Equipment Controllers ST 105(Web-Based)

PXC-Modular Field Panel ST 106(Web-Based)

Fume Hood and Laboratory Room Controllers ST 109(Web-Based)

Introduction to Control ProgrammingST 103(Web-Based)

$0

$0

$0

$50

$50

$50

$50

$0

$50

Hours

HoursHours

Hours

Hours

Hours

Hours

Hours

Hours

PPCL Syntax ReviewST 104(Web-Based)

$150

Hours

MBC-RBC Interactive Technical ManualST 111(Web-Based)

$0

Hours

Building Automation

21

Introduction to Desigo CC

Course Code: ST 101

Target AudienceFor users who need an overview of the Desigo CC Management Station.

DescriptionThis web-based training course provides an introduction to the Desigo CC Management Station.

Topics• Platform Design• Workflow• Applications

Insight Basics

Course Code: ST 102

Target AudienceFor users who need an overview of the Insight Workstation.

DescriptionThe web-based training course introduces common Insight applications.

Topics• Graphics• Alarm Status• Main Menu• Report Viewer• Panel Point Log Screen

Introduction to Control Programming

Course Code: ST 103

Target AudienceFor users whose role is to work with PPCL and the Program Editor.

DescriptionThe web-based training course covers the flow and functionality of creating, editing and saving a building's control program.

Topics• Program Editor• Building Automation PPCL

Programs• PPCL Reports

Our self-paced web-based training allows you to select topics specific to your needs and set your own pace for completing the chosen courses.

All course material can be accessed on ES Online: www.siemens.com/esonline.

Building Automation

22

Introduction to Terminal Equipment Controllers

Course Code: ST 105

Target AudienceFor users whose role is to monitor, interpret and command Terminal Equipment Controllers (TECs) direct connection subpoint data.

DescriptionThe web-based training course explains the basic operation, interaction and function of a TEC.

Topics• TEC Basics• TEC Components• TEC Subpoints• Datamate Base Operations• TEC Operations

PPCL Syntax Review

Course Code: ST 104

Target AudienceFor advanced users who need to write or edit PPCL statements using proper syntax.

DescriptionThe web-based training course provides information on PPCL syntax and structure.

Topics• PPCL Rules and Guidelines• PPCL Statement Review• PPCL Composition

PXC-Modular Field Panel and TX-I/O

Course Code: ST 106

Target AudienceFor users whose role is to work on the PXC-Modular Field Panel.

DescriptionThe web-based training course explains the operation and features of the PXC-Modular Field Panel.

Topics• PXC Modular Series Product

Overview• APOGEE Automation Networking• Principles of PXC Modular

Operation• TX-I/O Product Line

Insight Scheduler

Course Code: ST 107

Target AudienceFor users whose role is to control buildings using the Insight Scheduler application.

DescriptionThis web-based training course teaches the terms and concepts of the scheduler application, how to schedule an event and zone, how to populate and schedule a replacement day, how to override an event schedule and how to schedule trend collections and reports.

Topics• Scheduler Navigation• Creating a Schedule• Modifying a Schedule• Overriding a Schedule• Adding Trend Collections, Reports,

Events and Zones to a Schedule

Insight Trending

Course Code: ST 108

Target AudienceFor users whose role is to place points into trend using the Insight Workstation.

DescriptionThe web-based training course will demonstrate how to place a point into trend and examine trend data using multiple Insight Applications.

Topics• Trend Concepts• Trend Types• Trend Definitions• Trend Collection Methods• Trend Data Detail Report• Scheduling Trend Reports

Fume Hood and Laboratory Room Controllers

Course Code: ST 109

Target AudienceFor users whose role is to control fume hoods in a laboratory using the Insight Workstation.

DescriptionThe web-based training course explains the basic components of a fume hood and the operations of the controllers.

Topics• Fume Hood Components• Operator Display Panel (ODP)• Fume Hood Controller• Room Control

Building Automation

23

MBC-RBC Interactive Technical Manual

Course Code: ST 111

Target AudienceFor users whose role requires technical knowledge of the MBC and RBC field panels.

DescriptionThe web-based training course is an interactive technical manual that provides detailed information on the MBC and RBC field panels for quick reference on the job.

Topics• Enclosure Box• Internal Components• Open Processor• Power Modules• Point Termination Modules

Remote Notification (RENO)

Course Code: ST 110

Target AudienceFor users whose role is to configure or operate the RENO feature within the Insight Workstation.

DescriptionThe web-based training course addresses all aspects of the RENO feature in the Insight Workstation from configuring a system setting to setting up a point for remote notification.

Topics• System Requirements• System Settings• Creating Contacts• Escalation Lists• Scheduling• Point Setup• Heartbeat

Building Automation

24

Security Training Offerings

Security Training Offerings

SiPass Access ControlST 4203(Instructor-Led)

SiPass Extended OperationsST 4254(Instructor-Led)

Days

$1650 $2195

Days

SiPass Access Control

Course Code: ST 4203

Target AudienceFor users whose role is to operate and administer a SiPass Integrated system.

PrerequisitesNone

DescriptionLearn to navigate SiPass Integrated menus and toolbars, cardholder access privileges and define time schedules and holidays.

ObjectivesUpon completion of the course, students should be able to:

• Review basic SiPass Integrated graphical user interface (GUI) functions

• Configure offline access mode• Create and modify work groups,

access groups and access levels• Use the Find and Group buttons

Topics• Introduction to SiPass Integrated

Access Control System• SiPass Integrated Advanced

Functions• Operator Cardholder

Administration and Access Control• SiPass Integrated Hardware• SiPass Integrated Alarming• SiPass Integrated Reporting and

Customized Reports

SiPass Extended Operations

Course Code: ST 4254

Target AudienceFor advanced users whose role is to operate and administer a SiPass Integrated system.

PrerequisitesST 4203 - SiPass Access Control

DescriptionLearn advanced SiPass Integrated functions and features, event task programming and system component definitions.

Objectives Upon completion of the course, students should be able to:

• Create and implement Site Plans and Graphics

• Configure and implement Mifare Encoding

• Perform Alarm Class customization• Create and modify customized

transaction logs• Create customized, automated

and actionable reports

Topics• Review of the SiPass Integrated

Access Control System• SiPass Integrated Advanced Tasks• Advanced SiPass Programming• SiPass Integrated Alarming• Extended SiPass Integrated

Reporting and Customized Reports

Security

26

Fire and Life Safety Training Offerings

Training by Management Station

NCC - Network Command Center for Desigo Fire Safety ModularFIS 4334(Instructor-Led)

NCC - Network Command Center for Cerberus PRO ModularFIS 4534(Instructor-Led)

Desigo CC Fire Installation and Startup Management StationFIS 4115(Instructor-Led)

Cerberus DMS Fire Installation and Startup Management StationFIS 4505(Instructor-Led)

Days

Introduction to Desigo CC Fire Safety Management StationFIS 411(Web-Based)

Cerberus DMS OverviewFIS 450(Web-Based)

Hours

$100

$2500

$1715

$100

$2500

$1715

Days

Days

Days

Hours

Management stations provide centralized monitoring and control of fire safety systems.

We offer training on the three platforms; Desigo CC Fire Safety Management, Cerberus Danger Management System (DMS) and the Network Command Center (NCC).

All classes provide hands-on training to ensure users are provided with common workflows to monitor vital fire and life safety systems.

Management Station Training

Fire Safety

28

Desigo CC Fire Installation and Startup Management Station

Course Code: FIS 4115

Target AudienceFor users whose role is to engineer, install or maintain a Desigo CC Management Station.

PrerequisitesFIS 411 - Introduction to Desigo CC Fire Safety Management

DescriptionLearn to monitor and control a Desigo or Desigo Fire Safety Modular system using the Desigo CC Fire Safety Management Station.

ObjectivesUpon completion of the course, students should be able to:

• Explain and install the Desigo CC system and software

• License a dongle• Describe the Graphical User

Interface• Create a User-Defined and a

Physical View• Create, edit and delete scopes and

macros• Create customized reports• Create and modify layered graphics• Create security groups and user

accounts• Create, import and modify X-NET

and BACnet networks

Topics• License Management Console

(LMC)• System Management Console

(SMC)• UL Template Project• User Interface• Working with Views• Event Treatment• Graphics• User Administration• Macros/Reactions• Reports Printing• Licensing

Introduction to Desigo CC Fire Safety Management Station

Course Code: FIS 411

Target AudienceFor users whose role requires an understanding of the Desigo CC Fire Safety Management Station.

PrerequisitesNone

DescriptionThis web-based course introduces the Desigo CC Fire Safety Management Station. You will learn the features of the management station and the benefits of using Desigo CC to control a Desigo or Desigo Fire Safety Modular system.

Topics• Key Features of Desigo CC• Characteristics of this Full-Featured

Management Station• Desigo CC Workflow

NCC - Network Command Center for Desigo Fire Safety Modular

Course Code: FIS 4334

Target AudienceFor users whose role is to engineer, install or maintain a NCC for Desigo Fire Safety Modular system.

PrerequisitesNone

DescriptionLearn to identify NCC system types, discuss hardware configuration, import X-NET and WAN databases and graphics, setup system profiles and monitor and control a Desigo Fire Safety Modular system using NCC.

Objectives Upon completion of the course, students should be able to:

• Configure all the appropriate components for both X-NET and WAN topologies

• Install and license the NCC software

• Import and edit graphics in the NCC

• Create and execute macros• Create and modify Simple and

Log-on Passwords

Topics• Topology• Hardware Installation• Software Installation• X-NET and WAN Configurations• Graphics• Macros• User Accounts

Fire Safety

29

Cerberus DMS Overview

Course Code: FIS 450

Target AudienceFor users whose role requires an understanding of the Cerberus DMS Management Station.

DescriptionThis web-based course introduces the Cerberus DMS Management Station. You will learn the features of the management station and the benefits of using Cerberus DMS to control a Cerberus PRO or Cerberus PRO Modular system.

Topics• Key features of Cerberus DMS• Characteristics of this full-featured

management station• Cerberus DMS Workflow

Cerberus DMS Fire Installation and Startup Management Station

Course Code: FIS 4505

Target AudienceFor users whose role is to engineer, install or maintain a Cerberus DMS Management Station.

PrerequisitesFIS 450 - Cerberus DMS Overview

DescriptionLearn to monitor and control a Cerberus PRO or Cerberus PRO Modular system using the Cerberus DMS Management Station.

ObjectivesUpon completion of the course, students should be able to:

• Explain and install the Cerberus DMS system and software

• License a dongle• Describe the Graphical User

Interface• Create a User-Defined and a

Physical View• Create, edit and delete scopes and

macros• Create customized reports• Create and modify layered graphics• Create security groups and user

accounts• Create, import and modify X-NET

and BACnet networks

Topics• Product Overview• Software Installation• License Management Console

(LMC)• System Management Console

(SMC)• UL Template Project• User Interface• Working with Views• Event Treatment• Graphics• User Administration• Macros/Reactions• Reports Printing• Licensing

NCC - Network Command Center for Cerberus PRO Modular

Course Code: FIS 4534

Target AudienceFor users whose role is to engineer, install or maintain a NCC for Cerberus PRO Modular system.

PrerequisitesNone

DescriptionLearn to identify NCC system types, discuss hardware configuration, import X-NET and WAN databases and graphics, setup system profiles and monitor and control a Cerberus PRO Modular system using NCC.

Objectives Upon completion of the course, students should be able to:

• Configure all the appropriate components for both XNET and WAN topologies

• Install and license the NCC software

• Import and edit graphics in the NCC

• Create and execute macros• Create and modify Simple and

Log-on Passwords

Topics• Topology• Hardware Installation• Software Installation• X-NET and WAN Configurations• Graphics• Macros• User Accounts

Fire Safety

30

Desigo Fire Safety Modular Training

Hours

Desigo Fire Safety Modular and Desigo Fire Safety Modular Voice Fire Panels and Components FIS 251(Web-Based)

Desigo Fire Safety Modular - Installation, Operation and MaintenanceFIS 2314(Instructor-Led)

Days

Desigo Fire Safety Modular Voice - Installation, Operation and MaintenanceFIS 2324(Instructor-Led)

Days

Desigo Fire Safety Modular Advanced NetworkingFIS 2334(Instructor-Led)

Days

ZEUS - Desigo Fire Safety Modular Programming ToolFIS 2344(Instructor-Led)

Days

Desigo Fire Safety Modular Global Voice - Advanced ApplicationsFIS 2354(Instructor-Led)

Desigo Fire Safety ModularThe Desigo Fire Safety Modular is a comprehensive fire safety system for fast, reliable fire detection as well as alarm signaling and control.

Each course is hands-on in the installation, operation and maintenance of the Desigo Fire Safety Modular system. You will learn common workflows to ensure you can comfortably operate and maintain a Desigo Fire Safety Modular system.

The courses build off the preceding course and include topics from basic installation to advanced networking and Global Voice configuration. These courses are for Siemens customers.

This fire alarm system is formally known as FireFinder XLS.

$50

$1715

$1715

$1715

$1715

$1715

Days

Fire Safety

31

Desigo Fire Safety Modular - Installation, Operation and Maintenance

Course Code: FIS 2314

Target AudienceFor users whose role is to engineer, install, test or maintain a Desigo Fire Safety Modular System.

PrerequisitesFIS 251 - Desigo Fire Safety Modular and Desigo Fire Safety Modular Voice Fire Panels and Components

DescriptionLearn to install, operate, maintain, test, troubleshoot and wire a Desigo Fire Safety Modular fire alarm system.

Objectives Upon completion of the course, students should be able to:

• Update the panel and module firmware including the MLC

• Create and install maps and icons• Silence and reset the panel• Install field devices• Add devices to the database using

ZEUS• View and change detector

sensitivities• Enable and disable points• Test, inspect and troubleshoot a

Desigo Fire Safety Modular System

Topics• Basic Control Unit• Devices• Menu Functions• Desigo Fire Safety Modular

Programming Tool ZEUS

Desigo Fire Safety Modular and Desigo Fire Safety Modular Voice Fire Panels and Components

Course Code: FIS 251

Target AudienceFor users whose role requires an understanding of the Desigo Fire Safety Modular and the Desigo Fire Safety Modular Voice fire panels.

PrerequisitesNone

DescriptionThis web-based training introduces the field devices and components of the Desigo Fire Safety Modular and Desigo Fire Safety Modular Voice fire safety systems.

Topics• Fire Alarm System Selection• Desigo Fire Safety Modular Fire

Alarm System Operations• Desigo Fire Safety Modular Field

Devices• Desigo Fire Safety Modular Core

System Components• Desigo Fire Safety Modular System

Components and Options

ZEUS - Desigo Fire Safety Modular Programming Tool

Course Code: FIS 2344

Target AudienceFor users whose role is to administer or program a Desigo Fire Safety Modular system.

PrerequisitesFIS 2314 - Desigo Fire Safety Modular - Installation, Operation and Maintenance

DescriptionLearn how to design, modify, test or otherwise use the Desigo Fire Safety Modular system configuration tool (ZEUS).

ObjectivesUpon completion of the course, students should be able to:

• Install and navigate through the ZEUS programming tool

• Apply the ten steps of programming

• Create functional block diagrams• Use basic and complex logic

including inputs and outputs• Follow the steps from project

specifications to compiling your configuration

• Use functional diagrams to de-bug your program.

• Design a Desigo Fire Safety Modular system configuration

Topics• Basic System Operation• Ten Steps to Programming• Logic Functions• Functional Block• Diagrams

Fire Safety

32

Desigo Fire Safety Modular Voice - Installation, Operation and Maintenance

Course Code: FIS 2324

Target AudienceFor users whose role is to engineer, install, test, program or maintain a Desigo Fire Safety Modular Voice system.

PrerequisitesFIS 2314 - Desigo Fire Safety Modular - Installation, Operation and Maintenance

DescriptionLearn to install, operate, maintain and program the Desigo Fire Safety Modular Voice system.

Objectives Upon completion of the course, students should be able to:

• Understand the basic principles of a digital voice system

• Understand the concept of an 8-channel operation

• Design a voice system with remote enclosures

• Navigate through the ZEUS programming tool

• Operate a Desigo Fire Safety Modular Voice panel in emergency and maintenance situations

Topics• Voice System Basics• 8-Channel Voice Operations• Transponders• Software Design

Desigo Fire Safety Modular Advanced Networking

Course Code: FIS 2334

Target AudienceFor users whose role is to engineer, install or maintain a Desigo Fire Safety Modular system.

PrerequisitesFIS 2314 - Desigo Fire Safety Modular - Installation, Operation and Maintenance

Knowledge of the ZEUS software is highly recommended

DescriptionLearn to setup, modify, test, troubleshoot and control a H-NET and X-NET system as well as use the Global PMI monitor.

ObjectivesUpon completion of the course, students should be able to:

• Configure and operate the Desigo Fire Safety Modular in various networking configurations

• Use the test and maintenance menu

• Install basic option modules• Create and test network

configuration databases using the ZEUS software application

• Install, configure and test fiber optic network modules

• Setup and operate a X-NET system• Install and operate Global PMI

monitors

Topics• Basic System Operations• Basic Option Modules• Special Option Modules• X-NET• Global PMIs Monitors

Desigo Fire Safety Modular Global Voice - Advanced Applications

Course Code: FIS 2354

Target AudienceFor users whose role is to engineer, install or maintain a Desigo Fire Safety Modular Global Voice system.

PrerequisitesFIS 2314 - Desigo Fire Safety Modular - Installation, Operation and Maintenance

Completion of the FIS 2334 - Desigo Fire Safety Modular Advanced Networking is helpful

Comprehensive knowledge and the ability to work in the ZEUS programming tool is strongly recommended

DescriptionLearn to install, program and operate a global-advanced Desigo Fire Safety Modular Voice system.

ObjectivesUpon completion of the course, students should be able to:

• Understand the basic principles of the Desigo Fire Safety Modular Global Voice system

• Install the necessary hardware• Use the ZEUS programming tool to

program a Desigo Fire Safety Modular Voice with Advanced Global Applications

• Operate a Desigo Fire Safety Modular Global Voice panel in emergency and maintenance situations

Topics• Global Voice System Basics• Software Design

Fire Safety

33

Desigo Life Safety Training

Hours

Days

Desigo Life Safety UL System OverviewFIS 900(Web-Based)

Desigo Life Safety UL 50 PTFIS 9102(Instructor-Led)

Days

Desigo Life Safety UL 250/500 PTFIS 9104(Instructor-Led)

Days

Desigo Life Safety UL VoiceFIS 9124(Instructor-Led)

Desigo Life Safety UL System Overview

Course Code: FIS 900

Target AudienceFor users whose role requires an understanding of the Desigo Life Safety UL system.

PrerequisitesNone

DescriptionThis course is an introduction to the Desigo Life Safety UL system. Students will learn about the Desigo Life Safety UL portfolio and the devices available.

Topics• What is Desigo• System Overview• FCnet Stations• FDnet Peripherals• Tools• Documentation Available

$50

$1085

$1715

$2020

Fire Safety

34

Desigo Life Safety UL 50 PT

Course Code: FIS 9102

Target AudienceFor users whose role is to engineer, install or maintain a Desigo Life Safety UL 50 point panel system.

PrerequisitesFIS 900 - Desigo Life Safety UL System Overview

DescriptionLearn to install, operate, maintain, test, troubleshoot and program the Desigo Life Safety 50 point panel system.

Objectives Upon completion of the course, students should be able to:

• Silence and reset the panel• Configure and print reports• Create a Desigo Life Safety

configuration• Install and navigate the FXS901-U2

software• Use the steps from project

specification to complete and compile your configurations

• Understand basic and complex control logic including inputs and outputs

Topics• Basic Control Unit• Devices• Menu Functions• Desigo Fire Safety Configuration

Tool• Basic System Operation• Programming Steps• Control Functions

Desigo Life Safety UL Voice

Course Code: FIS 9124

Target AudienceFor users whose role is to engineer, install, maintain or program a Desigo Life Safety Voice system.

PrerequisitesFIS 9104 - Desigo Life Safety UL 250/500 PT

DescriptionLearn to install, operate, maintain, test, troubleshoot and wire a Desigo Life Safety Voice system using a 250/500 point panel.

Objectives Upon completion of the course, students should be able to:

• Describe the components used with the voice architecture

• Draw a basic Desigo Voice wiring diagram

• Use the configuration tool to build basic voice system programs

• Demonstrate LED behavior for voice priority activations on a voice panel

• Create advanced voice systems with custom designed audio libraries

• Create and commission a voice network

Topics• Basic Control Unit and Hardware• Basic System Operations• Desigo Fire Safety Engineering Tool• Networking

Desigo Life Safety UL 250/500 PT

Course Code: FIS 9104

Target AudienceFor users whose role is to engineer, install or maintain a Desigo Life Safety UL 250/500 point panel system.

PrerequisitesFIS 900 - Desigo Life Safety UL System Overview

DescriptionLearn to install, operate, maintain, test, troubleshoot and wire a Desigo Life Safety system using a 250/500 point panel.

Objectives Upon completion of the course, students should be able to:

• Acknowledge Alarms, Supervisories, Troubles and Securities

• Install field devices• Enable and disable points• Create a Desigo Life Safety

configuration• Create detection zones• Troubleshoot a Desigo Life Safety

system

Topics• Basic Control Unit• Basic System Operations• Devices• Menu Functions• Desigo Fire Safety Engineering Tool

Fire Safety

35

Cerberus PRO Modular Training

Hours

Days

Cerberus PRO Modular and Cerberus PRO Modular Voice Fire Panels and Components FIS 252(Web-Based)

Cerberus PRO Modular - Installation, Operation and MaintenanceFIS 2514(Instructor-Led)

Days

Cerberus PRO Modular Voice - Installation, Operation and MaintenanceFIS 2524(Instructor-Led)

Cerberus PRO Modular Advanced NetworkingFIS 2534(Instructor-Led)

ZEUS - Cerberus PRO Modular Programming ToolFIS 2544(Instructor-Led)

Days

Cerberus PRO Modular Global Voice - Advanced ApplicationsFIS 2554(Instructor-Led)

Cerberus PRO ModularThe Cerberus PRO Modular is a comprehensive fire safety system for fast, reliable fire detection as well as alarm signaling and control.

Each course is hands-on in the installation, operation and maintenance of the Cerberus PRO Modular system. You will learn common workflows to ensure you can comfortably operate and maintain a Cerberus PRO Modular system.

The courses build off the preceding course and include topics from basic installation to advanced networking and Global Voice configuration. These courses are for Siemens Solution Partners and customers.

This fire alarm system is formally known as FireFinder XLS.

$50

$1715

$1715

$1715

$1715

$1715

Days

Days

Fire Safety

36

Cerberus PRO Modular - Installation, Operation and Maintenance

Course Code: FIS 2514

Target AudienceFor users whose role is to engineer, install, test or maintain a Cerberus PRO Modular system.

PrerequisitesFIS 252 - Cerberus PRO Modular and Cerberus PRO Modular Voice Fire Panels and Components

DescriptionLearn to install, operate, maintain, test, troubleshoot and wire a Cerberus PRO Modular fire alarm system.

Objectives Upon completion of the course, students should be able to:

• Update the panel and module firmware including the MLC

• Create and install maps and icons• Silence and reset the panel• Install field devices• Add devices to the database using

ZEUS• Enable and disable points• Test, inspect and troubleshoot a

Cerberus PRO Modular System

Topics• Basic Control Unit• Devices• Menu Functions• Cerberus PRO Modular

Programming Tool ZEUS

Cerberus PRO Modular and Cerberus PRO Modular Voice Fire Panels and Components

Course Code: FIS 252

Target AudienceFor users whose role requires an understanding of the Cerberus PRO Modular and Cerberus PRO Modular Voice panels.

PrerequisitesNone

DescriptionThis web-based training introduces the field devices and components of the Cerberus PRO Modular and Cerberus PRO Modular Voice fire safety systems.

Topics• Fire Alarm System Selection• Cerberus PRO Modular Fire Alarm

System Operations• Cerberus PRO Modular Field

Devices• Cerberus PRO Modular Core System

Components• Cerberus PRO Modular System

Components and Options

ZEUS - Cerberus PRO Modular Programming Tool

Course Code: FIS 2544

Target AudienceFor users whose role is to administer or program a Cerberus PRO Modular system.

PrerequisitesFIS 2514 - Cerberus PRO Modular - Installation, Operation and Maintenance

DescriptionLearn how to design, modify, test or otherwise use the Cerberus PRO Modular system configuration tool (ZEUS).

ObjectivesUpon completion of the course, students should be able to:

• Install and navigate through the ZEUS programming tool

• Apply the ten steps of programming

• Create functional block diagrams• Use basic and complex logic

including inputs and outputs• Follow the steps from project

specifications to compiling your configuration

• Use functional diagrams to de-bug your program.

• Design a Cerberus PRO Modular system configuration

Topics• Basic System Operation• Ten Steps to Programming• Logic Functions• Functional Block• Diagrams

Fire Safety

37

Cerberus PRO Modular Voice -Installation, Operation and Maintenance

Course Code: FIS 2524

Target AudienceFor users whose role is to engineer, install, test, program or maintain a Cerberus PRO Modular Voice system.

PrerequisitesFIS 2514 - Cerberus PRO Modular - Installation, Operation and Maintenance

DescriptionLearn to install, operate, maintain and program the Cerberus PRO Modular Voice system.

Objectives Upon completion of the course, students should be able to:

• Understand the basic principles of a digital voice system

• Understand the concept of an 8-channel operation

• Design a voice system with remote enclosures

• Navigate through the ZEUS programming tool

• Operate a Cerberus PRO Modular Voice panel in emergency and maintenance situations

Topics• Voice System Basics• 8-Channel Voice Operations• Transponders• Software Design

Cerberus PRO Modular Advanced Networking

Course Code: FIS 2534

Target AudienceFor users whose role is to engineer, install or maintain a Cerberus PRO Modular system.

PrerequisitesFIS 2514 - Cerberus PRO Modular - Installation, Operation and Maintenance

Knowledge of the ZEUS software is highly recommended

DescriptionLearn to setup, modify, test, troubleshoot and control a H-NET and X-NET system as well as use the Global PMI monitor.

ObjectivesUpon completion of the course, students should be able to:

• Configure and operate the Cerberus PRO Modular in various networking configurations

• Use the test and maintenance menu

• Install basic option modules• Create and test network

configuration databases using the ZEUS software application

• Install, configure and test fiber optic network modules

• Setup and operate a X-NET system• Install and operate Global PMI

monitors

Topics• Basic System Operations• Basic Option Modules• Special Option Modules• X-NET• Global PMIs Monitors

Cerberus PRO Modular Global Voice - Advanced Applications

Course Code: FIS 2554

Target AudienceFor users whose role is to engineer, install or maintain a Cerberus PRO Modular Global Voice system.

PrerequisitesFIS 2514 - Cerberus PRO Modular - Installation, Operation and Maintenance

Completion of the FIS 2534 - Cerberus PRO Modular Advanced Networking is helpful

Comprehensive knowledge and the ability to work in the ZEUS programming tool is strongly recommended

DescriptionLearn to install, program and operate a global-advanced Cerberus PRO Modular Voice system.

ObjectivesUpon completion of the course, students should be able to:

• Understand the basic principles of the Cerberus PRO Modular Global Voice system

• Install the necessary hardware• Use the ZEUS programming tool to

program a Cerberus PRO Modular Voice with Advanced Global Applications

• Operate a Cerberus PRO Modular Global Voice panel in emergency and maintenance situations

Topics• Global Voice System Basics• Software Design

Fire Safety

38

Cerberus PRO Training

Hours

Days

Cerberus PRO OverviewFIS 950(Web-Based)

Cerberus PRO UL 250/500 PTFIS 9504(Instructor-Led)

Cerberus PROCerberus PRO is a comprehensive fire safety system for fast, reliable fire detection as well as alarm signaling and control.

Each course is hands-on in the installation, operation and maintenance of the Cerberus PRO system. You will learn common workflows to ensure you can comfortably operate and maintain a Cerberus PRO system.

These courses are for Siemens Solution Partners and customers.

$50

$1715

Days

Cerberus PRO UL VoiceFIS 9524(Instructor-Led)

$2020

Fire Safety

39

Cerberus PRO Overview

Course Code: FIS 950

Target AudienceFor users whose role requires an understanding of the Cerberus PRO system.

PrerequisitesNone

DescriptionThis course is an introduction to the Cerberus PRO system. You will learn about the Cerberus PRO UL portfolio and the devices available.

Topics• What is Cerberus PRO• System Overview• FCnet Stations• FDnet Peripherals• Tools• Documentation Available

Cerberus PRO UL 250/500 PT

Course Code: FIS 9504

Target AudienceFor users whose role is to engineer, install, maintain or program a Cerberus PRO 250/500 point panel system.

PrerequisitesFIS 950 - Cerberus PRO Overview

DescriptionLearn to install, operate, maintain, test, troubleshoot and wire a Cerberus PRO system using a 250/500 point panel.

Objectives Upon completion of the course, students should be able to:

• Acknowledge Alarms, Supervisories, Troubles and Securities

• Install field devices• Enable and disable points• Create a Cerberus PRO

configuration• Create detection zones• Troubleshoot a Cerberus PRO

system

Topics• Basic Control Unit• Basic System Operations• Devices• Menu Functions• Cerberus PRO Engineering Tool

Cerberus PRO UL Voice

Course Code: FIS 9524

Target AudienceFor users whose role is to engineer, install, maintain or program a Cerberus PRO Voice system.

PrerequisitesFIS 9504 - Cerberus PRO UL 250/500 PT

DescriptionLearn to install, operate, maintain, test, troubleshoot and wire a Cerberus PRO Voice system using a 250/500 point panel.

Objectives Upon completion of the course, students should be able to:

• Describe the components used with the Voice architecture

• Draw a basic Cerberus PRO Voice wiring diagram

• Use the configuration tool to build basic voice system programs

• Demonstrate LED behavior for voice priority activations on a voice panel

• Create advanced voice systems with custom designed audio libraries

• Create and commission a voice network

Topics• Basic Control Unit and Hardware• Basic System Operations• Cerberus PRO Fire Safety

Engineering Tool• Networking

Fire Safety

40

MXL Training

Hours

Days

Days

MXL and MXLV Fire Panel and ComponentsFIS 150(Web-Based)

MXL - Installation, Operation and MaintenanceFIS 1114(Instructor-Led)

MXL Voice - Installation, Operation and MaintenanceFIS 1124(Instructor-Led)

Days

MXL Advanced NetworkingFIS 1134(Instructor-Led)

Acculink - MXL Programming ToolFIS 1144(Instructor-Led)

Days

MXLMXL is one of the most successfully installed analog fire protection system in the US marketplace. It offers basic analog fire control panels and detectors that can be networked to meet changing needs.

Each course is hands-on in the installation, operation and maintenance of the MXL system. You will learn common workflows to ensure you can comfortably operate and maintain a MXL system.

$50

$1715

$1715

$1715

$1715

Fire Safety

41

MXL - Installation, Operation and Maintenance

Course Code: FIS 1114

Target AudienceFor users whose role is to engineer, install, test or maintain a MXL system.

PrerequisitesFIS 150 - MXL and MXLV Fire Panels and Components

DescriptionLearn to install, operate, maintain, test, troubleshoot and wire a MXL advanced microprocessor-based fire alarm system.

Objectives Upon completion of the course, students should be able to:

• Silence and reset the panel• Install field devices• Add devices to the database using

Acculink• View and change detector

sensitivities• Enable and disable points• Create and transfer MXL

configurations• Test, inspect and troubleshoot a

MXL system

Topics• Basic System Operation• Devices• Menu Functions• MXL Programming Tool (Acculink)

MXL and MXLV Fire Panels and Components

Course Code: FIS 150

Target AudienceFor users whose role requires an understanding of the MXL or MXL Voice Fire Safety system.

PrerequisitesNone

DescriptionThis web-based training introduces field devices and components of the MXL and MXLV fire safety systems.

Topics• Fire Alarm System Selection• MXL Fire Alarm System Operation• MXL Field Devices• MXL Core System Components• MXL System Components and

Options

Acculink - MXL Programming Tool

Course Code: FIS 1144

Target AudienceFor users whose role is to program a MXL system.

PrerequisitesFIS 1114 - MXL - Installation, Operation and Maintenance

DescriptionLearn to use the MXL programming tool, Acculink (CSG-M), to design a MXL fire alarm system.

ObjectivesUpon completion of the course, students should be able to:

• Install and navigate through the Acculink software

• Apply CSG-M and MXL security• Follow the steps from project

specifications to compiling your configuration

• Use basic and complex logic including inputs and outputs

• Create functional block diagrams• Use functional diagrams to input

programs into the software• Apply the ten steps of

programming• Design a MXL fire alarm system

configuration

Topics • Basic System Operations• Ten Steps to Programming• Logic Functions• Functional Block• Diagrams

Fire Safety

42

MXL Voice - Installation, Operation and Maintenance

Course Code: FIS 1124

Target AudienceFor users whose role is to engineer, install, maintain or operate a MXL Voice system.

PrerequisitesFIS 1114 - MXL - Installation, Operation and Maintenance

DescriptionLearn to install, operate and maintain an MXLV integrated voice evacuation system.

Objectives Upon completion of the course, students should be able to:

• Understand the basic principles of an analog voice system

• Install proper shielding• Explain the concepts of various

Zone cards used for audio distribution

• Install networks for voice systems including master/remote and peer-to-peer networks

• Install proper shielding for low-level and high-level audio

• Operate a MXL Voice panel in emergency and maintenance situations

Topics• Voice System Basics• 3-Channel Voice• Transponders• Shielding

MXL Advanced and Networking

Course Code: FIS 1134

Target AudienceFor users whose role is to engineer, install or maintain a MXL networked system.

PrerequisitesFIS 1114 - MXL - Installation, Operation and Maintenance

Knowledge of the Acculink software is highly recommended

DescriptionLearn to setup, modify, test, troubleshoot and control a M-NET and X-NET system as well as use the Global MKB monitor.

ObjectivesUpon completion of the course, students should be able to:

• Operate and configure a MXL X-NET system

• Use the operational features of the MXL system

• Install basic option modules• Program a MXL network using

Acculink• Install special option modules• Setup and operate a X-NET system• Setup inter-panel logics• Install and operate Global MKBs

Topics• Basic System Operations• Basic Option Modules• Special Option Modules• X-NET• Logic Functions• Global MKB Monitors

Fire Safety

43

Additional Training Offerings

Days

Sinorix Engineering and DesignFIS 6213(Instructor-Led)

VEDSA System Design and MaintenanceFIS 7114(Instructor-Led)

Days

$1645 $1715

Sinorix Engineering and Design

Course Code: FIS 6213

Target AudienceFor users whose role is to design or manage a Sinorix system.

PrerequisitesNone

DescriptionLearn to design a Sinorix 227 system using Siemens Sinorix 227 FlowCalc software.

ObjectivesUpon completion of the course, students should be able to:

• Understanding flooding agents and how to protect a hazard

• Describe hardware components including cylinders, valves and nozzles

• Use Sinorix 227 FlowCalc software to predict flow

• Design and build an isometric pipe network

• Describe enclosure integrity testing

Topics• Sinorix• Hardware• Software• Project Management

VESDA System Design and Maintenance

Course Code: FIS 7114

Target AudienceFor users whose role is to engineer, install or maintain a VESDA Air Sampling system.

PrerequisitesNone

DescriptionLearn to engineer, design, install, maintain and troubleshoot the VESDA Air Sampling Smoke Detection (ASSD) system.

Objectives Upon completion of the course, students should be able to:

• Understand various common applications for ASSD systems

• Design, install, commission and operate the VESDA system

• Use the pipe design program (Aspire) to validate the air sampling design

Topics• Applications• Codes and Standards• Operations• Hardware• Detectors• Programming• Display• Network• Pipe Design Programs

Fire Safety

44

Certification Training Offerings

Certification Courses

KNX Basic Certification (GAMMA Lighting)KNX 4204(Instructor-Led)

Days

$2500

KNX Basic Certification (GAMMA Lighting)

Course Code: KNX 4204

Target AudienceFor users whose role requires training on the KNX Technology.

PrerequisitesStudents should have an understanding of basic electrical installation and completed the required prework

DescriptionLearn the basics of data transmission for KNX communication technology.

ObjectivesUpon completion of the course, students should be able to:

• Understand the fundamentals for serial data transmissions

• Review the KNX Technology• Know the available bus devices in

accordance with the product database

• Design, program and function the latest version of ETS

• Configure and commission a sample project

Topics• Fundamentals• Bus Device• ETS (Engineering Tool Software)

KNX Advanced Certification (GAMMA Lighting)

Course Code: KNX 4215

Target AudienceFor advanced users whose role requires training on the KNX Technology.

PrerequisitesKNX 4204 - KNX Basic Certification (GAMMA Lighting)

DescriptionLearn advanced KNX features needed for building management system integration such as BACnet and TRA.

Objectives Upon completion of the course, students should be able to:

• Understand Fail-safe planning• Review KNX and Smart Metering/

Smart Grid Applications• Know the available bus devices in

accordance with the product database

• Know the latest revision ETS applications

• Understand lighting controls• Understand the BACnet gateway

Topics• Fundamentals• Bus Devices• ETS (Engineering Tool Software)

KNX Advanced Certification (GAMMA Lighting)KNX 4215(Instructor-Led)

Days

$2500

Certification

46

STUDENT INFORMATION *Required Fields

Student Name*:

Student Phone No: Fax No:

Company Name*: Service Agreement

Student’s Company Email Address*:

Company Mailing Address*:

City*: State*: ZIP*:

Supervisor’s Name*: Supervisor’s Email*:

Supervisor’s Signature*: Supervisor’s Phone No*:

We are (choose one): Siemens Distributor End User Other

If End User or Other, your Supplier is a*: Siemens Distributor Other

Supplier Company Name (who services your equipment/order parts from)*:

City: State: ZIP:

Local Contact at Supplier Company*: Contact’s Phone or Email*:

Sales Rep’s Name: Client Service Admin/Engineer's Name:

COURSE INFORMATION

Course Name & Number*:

Class Dates*:

Location*:

Dietary Restrictions:

BILLING ADDRESS Same as Student Information

Billing Address*:

City*: State*: ZIP*:

Phone No: Fax:

PAYMENT INFORMATION*

Purchase Order #: Check #:

Job #: SAP Customer Sold To #:

(Contact your local Siemens office if you do not have this information)Credit Card: VISA MC AMEX

If you are paying with a credit card, provide the name of the person responsible for payment. Please do not provide the credit card details on this form.

Cardholder's Name: Cardholder's Email Address:

Cardholder's Phone Number: Cardholder's Signature:

Student Cancellation Policy: Students who cancel within 22 calendar days of the class start date will be charged 50% of the tuition. Students will be charged 100% of the tuition if they cancel the day of the class or do not attend. The cancellation fee may be waived if your organization sends a qualified student as a substitute. Cancellation request need to be requested on www.siemens.com/esonline.

Note: Siemens BT University reserves the right to cancel classes and assumes no liability for expenses incurred by students due to class cancellation. All students will be notified of cancellations approximately one month before classes begin.

Training Enrollment FormPlease email the completed enrollment form to BT University at btuniversity.i-bt@siemens.com. We will notify you within two business days after we receive your enrollment form.

47

Notes:

Notes

48

Printed in the USA

© Copyright 2018 Siemens Building Technologies. All rights reserved. Printed in the USA.

APOGEE and Desigo CC are registered trademark of Siemens Building Technologies. Company and product names mentioned in this manual are trademarks or registered trademarks of their respective compa-nies. BACnet is a registered trademark of ASHRAE.

Siemens Building Technologies

950 Deerfield Parkway

Buffalo Grove, IL 60089-4513

USA

1-800-487-7771

Use your mobile device to scan the QR code for more information

www.siemens.com/esonline