JETWAY AIO System

User's Manual NO. HA238SAH-H110-QIGRevision: 1.0Release Date: July 26, 2017

1

2

Copyright©2017 JETWAY All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of JETWAY. Changes to the specifications and features in this manual may be made by JETWAY without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without JETWAY's prior written permission. Documentation Classifications In order to assist in the use of this product, JETWAY provides the following types of documentations: For quick set-up of the product, read the Quick Installation Guide included with the product. For detailed

product information, carefully read the User's Manual. For product-related information, check on our website at:

http://www.jetwayipc.com/

3

Table of Contents

Overview Of Your Documentation ................................................................................. 4 Box Contents ................................................................................................................... 5 Specifications .................................................................................................................. 6 Getting Start With Your PC ............................................................................................. 7

Adjustment of View Angle

..............................................................................................

13

Setting Up Your PC

.........................................................................................................

15

................................................................................

Appendix 1 ................................................. 17

20

11

Appendix 2

Disassembly Instructions ...............

: Precautions and Safety Notices

: Packing of Color Box

.............

...............................................................................

4

Overview Of Your Documentation

Document Type Your documentation contains PDF user manuals to help you perform various tasks. Document Type

User’s manual provides information about setting up your computer. Non-printed documentation

Servicing

Typographics Special tips, notes, and cautions that appear throughout this manual are designed to ensure that you perform specific tasks properly, preventing unnecessary errors.

CAUTION: Indicates important information to prevent potential damage to the unit and data, or personal injury caused by improper use.

NOTE: Indicates additional information for particular situation.

TIP: Indicates useful information for completing a task.

Manual CD (containing this manual) provides information about using your computer, cleaning andmaintaining the monitor and the accessories, and the common solutions to problems you mayencounter while using your computer.

Do not attempt to service this product yourself, as opening or removing covers may expose you to the riskof electric shock and other hazards. If any of the above mentioned misuse or other accidents such as dropping or mishandling occurs, contact qualified service personnel for servicing.

5

Box Contents

Carefully unpack the system and check that the following items were included. If any are missing or damaged, please contact your vender. Retain the box and packing in case of you need to transport your personal computer in the future. The fitted foam packing is ideal for protecting the device during transporting.

The appearance and contents of your package may be different from those illustrated be-low due to

regional variations.

Standard Items

AIO Power Adapter Power Cord Screwdriver

The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice. The motherboard image is for reference only.

6

Specifications

Model Jetway

Processor(CPU) Intel® Kabylake-S/Skylake-S Prozessor LGA 1151 Socket Core™i7/ i5/ i3 Support Max. 65W.

Chipset Intel® H110 Express Chipse

Operating System Windows 7 / 8.1 / 10

Memory Dual channel SODIMM DDR4 2133MHz 2 x SODIMMs. 32GB Maximum

HD drive 1 x 2.5" Hard disk(optional)

1 x MSATA (optional)

Graphics

Intel® Gen9 Graphics integrated in Intel® Processor

HDMI display 1920x1080@60Hz (max.)

DisplayPort 4096x2304@60Hz (max.)

LVDS 24-bits

Adapter 19 voltage 120 watt power adapter

Display 23.8" wide screen 16:9 HD,LED panel, Max resolution 1920 x 1080

LED Backlight

I/O port on Board

1 x DC Jack

1 x Gigabit LAN RJ45

1 x DisplayPort out

1 x HDMI out

4 x USB 3.0 port

1 x Line out

1 x MIC Jack

Chassis IO Ports 2 x USB 2.0 (Daughter Card) 1 x Card reader (4-in-1)

Media card reader 4-in-1 memory card reader(SD/MS/XD/MMC)

Network Integrated 10/100/1000 Gigabit Ethernet Wireless Network WLAN 802.11bgn, via Mini-PCIE, WiFi and Bluetooth combo card (Optional)

Audio 2 x Speaker 3 Watt for each

Environment Operation Temperature: 0∘C - 35∘C Storage Temperature: -20∘C - 60 ∘C

Requirement Operating Relative Humidity: 10% ~ 85 % Non-condensing Storage Relative Humidity: 10%~ 85% Non-condensing

Dimension 564mm(W) x 520mm(H) x 235mm(D)

Net Weight 8.78KG

7

Getting Start With Your PC

Touring Your PC This section describes the views and the features of the controls, ports, buttons, components, and connectors of your computer.

Front View

No. Item Description

1 Power Press power button to turn on computer.

2 Indicators LED indicators

2

1

8

Rear View

No Item Description 1 Vents The design of the vents is to prevent the computer from overheating. The internal

fans blow hot air away from heat-sensitive components in the computer.

Keep the vents clean and free of dirt and dust, as blocking it may cause serious thermal problems.

2 Computer Stand You can adjust the computer stand for the best viewing angle.

1

2

9

Right-side View

No Item Description 1 USB 2.0 Ports Connect the USB plugs into the USB ports to connect your USB devices, such as

MP3 players, digital cameras, keyboard and mouse, or external hard disk drives,

etc.

1

10

Bottom-side View

No Item Description 1 DC Power Connector Connect the DC power to this port

2 USB3.0

3 DisplayPort

4 HDMI

5 RJ45 LAN Port

6 Line Out Jack

7 Mic In Jack The default MIC In jack. Microphone can be connected to MIC in jack.

Ver 2.0

DisplayPort DisplayPort is a digital display interface which is primarily used to connect a video source to a display device such as a computer monitor, though it can also be used to transmit audio, USB, and other formsof data.

USB3.0 The USB port supports the USB3.0 specification. Use this port for USB devices such as a USBkeyboard/mouse, USB printer, USB flash drive and etc.

HDMI The HDMI provides an all-digital audio/video interface to transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI audio/video device to this port. The HDMI technology can supporta maximum resolution of 1920x1080 but the actual resolutions support depend on the monitor being used.

RJ45 LAN Port The Gigabit Ethernet LAN port provides internet connection at up to 1 Gbps data rate.Thefollowing describes the states of the LAN port LEDs.

Line Out Jack The default Line Out jack. Stereo speakers, earphone or front surround speakers can beconnected to Line Out jack.

11

Disassembly Instructions

Follow steps below to disassemble the AIO. Face Down the AIO Face down the AIO on a smooth surface using a soft material between surface and AIO to protect faceplate.

Remove the Back Cover Remove the back cover by removing the 9 fixed screws.(Red circle)Then pull over back cover.

Separate MB Shield Cover Remove the 8 fixed screws and lift the shield cover.

12

Separate the CPU Thermal Module Loosen the 6 fixed screws and lift the CPU thermal module.

Separate the DRAM Thermal Module

HDD bracket separate Loosen 4 screws to separate HDD-bracket

13

Adjustment of View Angle

Tilt Range (degree): Backward 20°~23°

Tilt Range (degree): Forward -5°~-2°

Lift Range: 130mm+/-5mm

14

Pivot function: The screen of the All-In-One PC is 90 degree rotatable.

In order to avoid scratching foot stand and bezel, move screen up, then rotate.

To adjust the image alignment, follow steps A and B. A. Right-click on the desktop then select “Display settings”.

B. Move cursor to Orientation pull down menu, then click your desired orientation option.

15

Setting Up Your PC

This section describes how to set up your computer and make adjustments to the monitor.

Preparing To Setup Your PC

Before attempting to set up your computer, to protect the computer and monitor, you should: • find a flat open area on your desk to position your computer. • place a soft item like the computer packaging bag on the desk for padding.

It is suggested to install your computer in a space that allows for airflow as restricting the airflow may cause overheating which could impact the performance of your computer.

1. Gently lay the screen face down on a flat clean padded surface. 2. Pick out the stand base body and the lifting stand (Part No.1 & No.2 ). 3. Lock the base to the lifting stand by tightening the screws. 4. Align the screw holes on the back cover of the computer reserved for VSEA Mount with corresponding ones on the stand and lock with the screws.

5. Carefully lift the computer and adjust the angle of the screen.

Part2

Part1

16

Turning On Your PC

After you finish the installation of your computer, press the Power computer to turn it on. Then follow the on-screen instructions to complete the initial setup.

Turning Off Your PC

To turn off the system, close all the active windows, and then click the Windows start menu at bottom left corner of your screen, then click power button then click Shutdown button.

17

Appendix 1

Safety Precautions Observe all cautions and safety related notes located inside the display cabinet and on the display chassis. Operation of these displays outside the cabinet or with the cover removed involves a shock hazard from the

display backlight’s inverter. Work on the display should not be attempted by anyone who is not thoroughly familiar with precautions necessary when working on high voltage equipment.

Before returning a serviced display to the customer, a thorough safety test must be performed to verify that the display is safe to operate without danger or shock.

Product Safety Notice Many electrical and mechanical parts in this chassis provide special visual safety protection. The protection

afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc.

Before replacing any of these components, read the parts list included in this manual carefully. The use of substitute replacement parts, which do not have the same safety characteristics, as specified in the parts list may create shock, fire or other hazards, and hence should be prohibited.

Service Notes When replacing parts or circuit boards, wrap the wires around terminals before soldering. Keep wires away from high temperature components. Keep cable and their shielding in their original position so as to reduce interference.

: Precautions and Safety Notices

18

Take out foam on left and right side. Take out the AIO by grasping top of the machine.

Handing and Placing Methods

Correct Methods Incorrect Methods

Only touch the metal frame of the LCD panel .Do not touch surface of the polarizer.

Pressing surface of LCD panel with fingers, may scratch the surface of panel.

19

19

Place the AIO on clean and soft foam pad. Placing AIO on foreign objects, could scratch the surface of the panel.

If panel is placed face down on the lap, that could scratch the surface of the panel.

20

Put the AIO in the EPE bag

AIO Body

Stand

Right EPE cushion

Left EPE cushion

Stand EPE cushion

Place the AIO into the carton and then put all accessories into the box and then seal the carton with tape.

Stand Base

Power cord and a screw Adapter

Appendix 2: Packing of Color Box