2019 Price ListDufferin Concrete East District

A division of CRH Canada Inc.

2 | 2019 East District Price List | Dufferin Concrete

Strength MixesMIX Price

10 MPa $171.00/m3

15 MPa $175.00/m3

20 MPa $181.00/m3

25 MPa $189.00/m3

30 MPa $197.00/m3

MIX Price

35 MPa $211.00/m3

40 MPa $225.00/m3

45 MPa $255.00/m3*

50 MPa $276.00/m3*

Note: Strengths over 35MPa require a 3m3 minimum to ensure a quality product *Includes HSF Cement

Segmentation PricingCURBS & SIDEWALKS Price

30 MPa 355 kg (including air) $218.00/m3

32 MPa C-2 0.45w/c (including air) $215.00/m3

480 Kg Metro Road Cuts $252.00/m3

Note: A premium may apply for limestone aggregate in certain regions

INDUSTRIAL FLOOR MIX Price

25 MPa 0.55w/c $202.00/m3

RESIDENTIAL HOUSING Price

Footings & Walls 15 MPa $187.00/m3

0.70w/c (OBC) Class R1 & R2

Basement Floors 25 MPa 0.65w/c R3 (OBC) $190.00/m3

Garage Floors 32 MPa 0.45w/c C-2 (OBC) $215.00/m3

CAISSONS & SHORING Price

0.4 MPa Piling Mix $160.00/m3

2.0 MPa Piling $161.00/m3

20 MPa 150mm slump $191.00/m3

25 MPa 150mm slump $199.00/m3

30 MPa 150mm slump $207.00/m3

CONTROLLED DENSITY/FILLS Price

Unshrinkable Fill $157.00/m3

0.7 MPa Backfill $158.00/m3

4.0 MPa Pipe bedding $162.00/m3

8.3 MPa Duct Encasement $168.00/m3

CSA Specification Mixes CAN/CSA-A23. 1-14

STRENGTH CLASS OF EXPOSURE** W/C RATIO Price

25 MPa F-2, C-4, A-4, N-CF, R-1, R-2, R-3 0.55 $202.00/m3

30 MPa F-1, C-3, A-3, S-3 0.50 $207.00/m3**

32 MPa C-2, A-2, S-2 0.45 $215.00/m3**

35 MPa C-1, A-1, S-1 0.40 $224.00/m3 <1500 Coulombs

40 MPa C-1, A-1, S-1 0.40 $249.00/m3 <1500 Coulombs

50 MPa (56 days) CXL, A-XL 0.40 $292.00/m3 <1000 Coulombs

** In conformance with Section 4, Table 2 National Standards of Canada, CAN/CSA-A-23.1-14 “S” Series exposure prices are based on acceptable Portland/Slag blends for sulphate resistance

2019 Price List Effective January 1, 2019

Dufferin Concrete | 2019 East District Price List | 3

MTO/OPSS/Municipal Mixes Price

15 MPa $192.00/m3

20 MPa $204.00/m3

25 MPa $210.00/m3

30 MPa $218.00/m3

Price

35 MPa $235.00/m3

50 MPa $292.00/m3

30 MPa Gunite Mix $249.00/m3

35 MPa SCC $312.00/m3

Projects may require Supporting Concrete Mix Documentations (includes concrete test load):

Linear Shrinkage Testing $1,250.00/test

Rapid Chloride Permeability (RCP) $1,250.00/test

Air Void System (AVS) $1,250.00/test

MTO Material Sampling Charge (as per OPSS) $200.00/project

**Minimum Load size of 3m3 required for all MTO to ensure quality**

Accelerated Strength Gain MixesDESIGN STRENGTH 75% OF DESIGN STRENGTH 75% OF DESIGN STRENGTH 75% OF DESIGN STRENGTH IN 24 HOURS IN 48 HOURS IN 72 HOURS

25 MPa, add $42.00/m3 $38.00/m3 $33.00/m3

30 MPa, add $44.00/m3 $40.00/m3 $35.00/m3

32 MPa, add $45.00/m3 $41.00/m3 $36.00/m3

35 MPa, add $46.00/m3 $42.00/m3 $37.00/m3

40 MPa, add $48.00/m3 $44.00/m3 $39.00/m3

35 MPa,C-1 <1500 Coulombs $53.00/m3 $47.00/m3 $42.00/m3

Based on minimum temperature of 20 degrees C with supplementary heating as per C.S.A. requirements

Cold Weather ConcreteThermalcrete Mixes

AMBIENT TEMPERATURE DEGREES CELSIUS THERMAL ADDITIVE Price

Above +6 Thermal 1 $30.00/m3

+3 to +5 Thermal 2 $35.00/m3

0 to +2 Thermal 3 $38.00/m3

-3 to -1 Thermal 4 $40.00/m3

-7 to -4 Thermal 5 $52.00/m3

Ambient temperature refers to 12hrs after it has been poured.Performance may vary with LEED specifications.Available for mixes 30MPa and greater.

4 | 2019 East District Price List | Dufferin Concrete

Lightweight ConcreteSEMI-LIGHTWEIGHT 2000 KG/m3 PRICE

20 MPa $270.00/m3

25 MPa $280.00/m3

30 MPa $285.00/m3

Other Semi-Lightweight (1840 kg - 2000 kg/m3) available and Fully-Lightweight (1600 kg/m3) on request

DC Foamcrete® $255.00/m3

Grout Mixes - Concrete Sand35 MPa 1-1 $327.00/m3

30 MPa 1-1.5 $307.00/m3

25 MPa 1-2 $277.00/m3

20 MPa 1-2.5 $262.00/m3

15 MPa 1-3 $257.00/m3

10 MPa 1-4 $247.00/m3

Pump Priming Grout $500.00/m3

Recycled ProductsRecycled Concrete Aggregate On Request

BLOCKS - SIZES AVAILABLE:

1) 5’x2’x2’ (3000 lbs) non-interlocking

$125.00ea

2) 6’x3’x2’ (5200 lbs) interlocking

3) 9’x3’x2’ (7200 lbs) interlocking

**Block sizes and availability vary from plant to plant

Special Aggregate/Cement13/14 mm Limestone (Gravel) $15.00/m3

40 mm Stone On Request

Blended Silica Fume (HSF) $60.00/m3

Type HE Cement $30.00/m3

Colour Pigments for Ready-Mix ConcreteNOTES COLOUR PRICES:

Tier 1 $70.00

Tier 2 $80.00

Tier 3 $95.00

Tier 4 $110.00

Colour Washout $70.00/load

Please refer to Dufferin Concrete’s colour brochure for your colour selection.

Additional custom colours are available upon request.

Dufferin Concrete prides itself on the quality and workmanship of our colour program. Every attempt is made to ensure that the colour you choose matches as closely as possible to the sample, however, due to the varying natural pigmentations in the aggregates we strongly recommend a colour test pour be completed prior to doing the final concrete pour.

Dufferin Concrete | 2019 East District Price List | 5

Concrete Enhancement ProductsSUPERPLASTICIZERS • Increased Workability • Water/Cement Ratio Reduction $15.00/m3

AIR ENTRAINMENT Less than 40 MPa $6.00/m3 Strengths 40 MPa and greater $12.00/m3

RX EXTENDED RETARDATION 4 hr $10.00/m3

R & SR NORMAL RETARDATION 2 hr $7.00/m3

CALCIUM CHLORIDE 1% $7.00/m3 2% $10.00/m3

NON-CHLORIDE ACCELERATOR 1% $15.00/m3 2% $30.00/m3

CORROSION INHIBITING ADMIXTURE $3.00/litre

HOT WEATHER COOLING (ice only) Concrete Temperatures 26°C to 30°C $60.00/m3 Concrete Temperatures 22°C to 25°C $80.00/m3 Concrete Temperatures Below 22°C On Request

FAST TRACK CONCRETE $1,350.00/m3

Additional Service ChargesALL CONCRETE PRICING IS SUBJECT TO A $5.00/m3 ANNUAL INCREASE ON JANUARY 1ST

PUMP MIXES• Standard Mixes - 5” Pump Line Required $8.00/m3 • Pump Mixes for 2” Pump Lines On Request

SMALL LOAD CHARGES 1.00m3 - 2.00m3 $250.00 2.25m3 - 4.00m3 $200.00 4.25m3 - 5.00m3 $100.00

All concrete orders 8m and over get 1 free balance.

3 on strengths of 35MPa and over)

RESTRICTED AXLE WEIGHT SEASON CHARGES When Highway Traffic Act restrictions are in effect a Restricted Load Charge will apply $200.00/Load

SECOND BALANCE LOAD CHARGE $200.00/Load

ENVIRONMENTAL FEE $5.00/m3

WINTER HANDLING - November 1 to April 15 $18.00/m3

WASH WATER HANDLING FEE $2.00/m3

SITE SUPERVISION AND TESTING CHARGE • Minimum load size 5m3 required $20.00/m3

MATURITY INFIELD STRENGTH DETERMINATION • Early stripping Available on request

DELIVERY HOURSRegular business hours 7 a.m. to 5 p.m., Monday through Friday. For completion of any delivery started: • After 5 p.m. and before 9 p.m. $30.00/m3 • After 9 p.m. and before 7 a.m $60.00/m3 • Saturday Delivery $20.00/m3

WAITING TIME • Sixty (60) minutes per load allowed for unloading

unless otherwise specified• Additional time - $5.00/min

PLANT START UP CHARGE $2,500.00

RETURNED CONCRETE $25.00/m3

POUR CANCELLATION CHARGEA minimum of $600.00 will apply to all pour cancellations. The

VARIABLE FUEL SURCHARGENew for 2019, all concrete will be charged a Variable FuelSurcharge, based on the average quarterly rack rate, which willbe posted on the Dufferin Concrete Website.The base fuel surcharge is $2.00/m3, established at an averagediesel fuel rack rate of $0.87/L (Q3 2018). The fuel surcharge will be adjusted the 1st day of every quarter,based on the previous quarter’s average rack rate. The surchargewill be adjusted as outlined in the table below.

Rack Rate Fuel Surcharge<$0.67/L $0.00/m3

$0.67/L to <$0.77/L $1.00/m3

$0.77/L to <$0.97/L (Base) $2.00/m3

$0.97/L to <$1.07/L $3.00/m3

>$1.07/L $4.00/m3

$600.00 includes expenses incurred for the first ready-mix truck, batcher and loader operator. For each additional ready-mix truck an additional $200.00 charge will apply. Notice of pour cancellation must be received 24h in advance prior to the pour.

DELIVERY NOTESIt is the contractor’s responsibility to provide safe access to enter and exit the site, as well as provide a staging area and trained flagman for all trucks. Dufferin Concrete has experienced and trained personnel to assist our customers to ensure these requirements are met in a safe and timely manner, please contact us if you require these additional services.Dufferin Concrete prides itself on delivering quality products and services however, variables beyond our control such as weather, traffic or utility outages can affect our services.

3

(minimum load requirement of 3m

DUFFERIN CONCRETE

2300 Steeles Avenue West, 4th floorConcord, Ontario L4K 5X6www.dufferinconcrete.ca

CORPORATE OFFICE

CRH Canada Group Inc.2300 Steeles Avenue West, 4th floorConcord, Ontario L4K 5X6Tel.: 905.761.7100Fax: 905.761.7200www.crhcanada.com

DUFFERIN CONCRETE PLANT LOCATIONS

East RegionCentral DispatchTel.: 1-877-655-3922Plant LocationsBowmanville, Peterborough,Whitby

Metro regionCentral DispatchTel.: 1-888-231-9444Plant LocationsConcord, Etobicoke, Georgetown,Malton, Maple, Markham, Mississauga, Scarborough, Toronto

North RegionCentral DispatchTel.: 1-833-303-9817Plant LocationsBradford, Innisfil, Orangeville

Peninsula RegionCentral DispatchTel.: 1-866-436-8171 Plant LocationsBeamsville, Burlington, Hamilton, Niagara Falls

Southwest RegionCentral DispatchTel.: 1-888-745-1151Plant LocationsAylmer, Cambridge, Kitchener, London, Simcoe, Stratford, Tillsonburg

6 | 2019 East District Price List | Dufferin Concrete

Innisfil

Bradford

Peterborough

Port Hope

Bowmanville

Whitby

Scarborough

Toronto

Markham Maple

Orangeville

Georgetown

Mississauga

Malton

Etobicoke

Guelph

Cambridge

Kitchener

Stratford

London

Aylmer Tillsonburg Simcoe

Hamilton Beamsville

Niagara Falls

Welland

Burlington

Macro Structural Fibers Replace Welded Wire Mesh, Steel Fibers & RebarTUF-STRAND STRUCTURAL FIBERS

• 2.4 kg/m Dosage based on typical 6 by 6 (six gauge mesh)° Replaces welded wire mesh on metal decking° Two hour Fire rating, meets UL & ULC.

Thickness Price Est.*3 in. $0.25/sq. ft.3.5 in. $0.29/sq. ft.4 in. $0.33/sq. ft.

• 1.8 kg/m3 Dosage based on typical 6 by 6 (six gauge mesh)° Replaces welded wire mesh for SOG

*Note, purchases of fibers are billed on a $/m3 basis.

Thickness Price Est.*3 in. $0.18/sq. ft.4 in. $0.24/sq. ft.5 in. $0.30/sq. ft.6 in. $0.35/sq. ft.

3

• Steel and rebar replacement – Reviewed and engineered to meet loading requirements. • Plasticizing agent recommended Pricing on request

MAXTEN STRUCTURAL FIBERS

Dufferin Concrete | 2019 East District Price List | 7

BENEFITS OF FIBER-ENFORCED CONCRETE

• Ease of placement and finishing - delivered in the concrete, no extra orders to place

• Accelerated concrete placement time - reduced project time• Equivalent strength to steel - better control of plastic

shrinkage, cracking and reduced segregation • Cost effective replacement for welded wire mesh (WWM)• No storage needed for fibers or other reinforcing materials• Safety - no handling and tripping hazards (as with WWM)

APPLICATIONS

• Industrial floors• Residential applications (driveway, garage, porch, walkway, basement floor) • Composite steel deck• Shotcrete applications• Agricultural applications• Roads, parking lots, slabs

Micro FibersPOLYPROPYLENE FIBERS • Plastic shrinkage reduction $16.00/m3

Steel Fibers• Steel fiber supplied Pricing on request

• Steel fiber addition fee (by contractor) $30/load