Helping you farm Easier, Safer and More Profitable!

Click the “Add Camera” button to add a new camera

If you have more than one camera, you will need to change the WiFi connection depending on which camera you want to view. For example, once finished looking at camera #1, to switch to camera #2 you would go back into the device WiFi settings (Menu > Settings > WiFi), and selectyour second camera (eg. 000000000002). Once connected, go back and open “IP Cam Viewer Lite”. No further configuration is required in the app for other cameras.

Once the settings are added, click the “Test” button. If you see the image of the camera then your device is configured success-fully. Click the “Save” button which will then take you to the main camera view.

Input the following settings into the Add/Edit IP Camera Screen Name: Camera 1 Make: Unknown Brand Model: IPCAM1, IPCAM2 Host / IP: 192.168.1.1 HTTP Port: Leave Blank User: admin Pswd: Leave Blank

4

7

6

5

WIFI IMPLEMENT MANUAL

www.allenleigh.ca

204-728-8878545 Assiniboine Ave, Brandon

1-866-289-8164

Android Setup

iPhone Setup

Open up the Google Play Store and search for the app called “IP Cam Viewer Lite”.

Download and install this app

Once the settings are added, click the “Test” button. If you see the image of the camera then your device is configured successfully.

Click the “Save” button which will then take you to the main camera view.

If you have more than one camera, you will need to change the WiFi connection depending on which camera you want to view. For example, once finished looking at camera #1, to switch to camera #2 you would go back into the device WiFi settings (Menu > Settings > WiFi), and selectyour second camera (eg. 000000000002). Once connected, go back and open “IP Cam Viewer Lite”. No further configuration is required in the app for other cameras.

1

6

7

Once the app is installed, go into yourdevice WiFi settings (Menu > Settings > Wifi) and connect to the cameras AP (named “000000000001”)

Once connected, go back to your home screen and open “IP Cam Viewer Lite” which was previously installed.

2

3

Click the button with a plus sign to add a new camera

Input the following settings into the Add/Edit IP Camera Screen

Name: Camera 1 Make: Unknown Brand Model: IPCAM1, IPCAM2 Host / IP: 192.168.1.1 HTTP Port: Leave Blank User: admin Pswd: Leave Blank

4

5

Open up the Apple App Store and search for the app called “IP Cam Viewer Lite”.

Download and install this app

Once the app is installed, go into your device WiFi settings (Settings > Wifi) and connect to the cameras AP (named “000000000001”)

Once connected, go back to your home screen and open “IP Cam Viewer Lite” which was previously installed.

1

2

3